123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232 |
- /**
- * Polish
- *
- * LCD Menu Messages
- * Please note these are limited to 17 characters!
- *
- */
- #define WELCOME_MSG CUSTOM_MENDEL_NAME " gotowa"
- #define MSG_SD_INSERTED "Karta wlozona"
- #define MSG_SD_REMOVED "Karta wyjeta"
- #define MSG_MAIN "Menu glowne"
- #define MSG_DISABLE_STEPPERS "Wylaczyc silniki"
- #define MSG_AUTO_HOME "Auto home"
- #define MSG_COOLDOWN "Wychlodzic"
- #define MSG_MOVE_AXIS "Ruch osi"
- #define MSG_MOVE_X "Przesunac X"
- #define MSG_MOVE_Y "Przesunac Y"
- #define MSG_MOVE_Z "Przesunac Z"
- #define MSG_MOVE_E "Extruder"
- #define MSG_SPEED "Predkosc"
- #define MSG_NOZZLE "Dysza"
- #define MSG_BED "Stolik"
- #define MSG_FAN_SPEED "Predkosc went."
- #define MSG_FLOW "Przeplyw"
- #define MSG_TEMPERATURE "Temperatura"
- #define MSG_WATCH "Informacje"
- #define MSG_TUNE "Nastroic"
- #define MSG_PAUSE_PRINT "Przerwac druk"
- #define MSG_RESUME_PRINT "Kontynuowac"
- #define MSG_STOP_PRINT "Zatrzymac druk"
- #define MSG_CARD_MENU "Druk z SD"
- #define MSG_NO_CARD "Brak karty SD"
- #define MSG_DWELL "Sleep..."
- #define MSG_USERWAIT "Wait for user..."
- #define MSG_RESUMING "Wznowienie druku"
- #define MSG_PRINT_ABORTED "Druk przerwany"
- #define MSG_NO_MOVE "No move."
- #define MSG_KILLED "KILLED. "
- #define MSG_STOPPED "STOPPED. "
- #define MSG_FILAMENTCHANGE "Wymienic filament"
- #define MSG_BABYSTEP_Z "Dostrojenie osy Z"
- #define MSG_ADJUSTZ "Autodostroic Z?"
- #define MSG_PICK_Z "Vyberte vytisk"
- #define MSG_SETTINGS "Ustawienia"
- #define MSG_PREHEAT "Grzanie"
- #define MSG_UNLOAD_FILAMENT "Wyjac filament"
- #define MSG_LOAD_FILAMENT "Wprowadz filament"
- #define MSG_ERROR "BLAD:"
- #define MSG_PREHEAT_NOZZLE "Nagrzej dysze!"
- #define MSG_SUPPORT "Pomoc"
- #define MSG_CORRECTLY "Wymiana ok?"
- #define MSG_YES "Tak"
- #define MSG_NO "Nie"
- #define MSG_NOT_LOADED "Brak filamentu"
- #define MSG_NOT_COLOR "Kolor zanieczysz."
- #define MSG_LOADING_FILAMENT "Wprow. filamentu"
- #define MSG_PLEASE_WAIT "Prosze czekac"
- #define MSG_LOADING_COLOR "Czyszcz. koloru"
- #define MSG_CHANGE_SUCCESS "Wymiana ok!"
- #define MSG_PRESS "Nacisnij przycisk"
- #define MSG_INSERT_FILAMENT "Wprowadz filament"
- #define MSG_CHANGING_FILAMENT "Wymiana filamentu"
- #define MSG_SILENT_MODE_ON "Mod [cichy]"
- #define MSG_SILENT_MODE_OFF "Mod [w wydajnosc]"
- #define MSG_REBOOT "Restart drukarki"
- #define MSG_TAKE_EFFECT "wprow. zmian"
- #define MSG_HEATING "Grzanie..."
- #define MSG_HEATING_COMPLETE "Grzanie OK."
- #define MSG_BED_HEATING "Grzanie stolika.."
- #define MSG_BED_DONE "Stolik OK."
- #define MSG_LANGUAGE_NAME "Polski"
- #define MSG_LANGUAGE_SELECT "Wybor jezyka"
- #define MSG_PRUSA3D "prusa3d.cz"
- #define MSG_PRUSA3D_FORUM "forum.prusa3d.cz"
- #define MSG_PRUSA3D_HOWTO "howto.prusa3d.cz"
- // Do not translate those!
-
- #define MSG_Enqueing "enqueing \""
- #define MSG_POWERUP "PowerUp"
- #define MSG_CONFIGURATION_VER " Last Updated: "
- #define MSG_FREE_MEMORY " Free Memory: "
- #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
- #define MSG_OK "ok"
- #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
- #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
- #define MSG_BEGIN_FILE_LIST "Begin file list"
- #define MSG_END_FILE_LIST "End file list"
- #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
- #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
- #define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
- #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
- #define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
- #define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
- #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
- #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
- #define MSG_ERR_KILLED "Printer halted. kill() called!"
- #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
- #define MSG_RESEND "Resend: "
- #define MSG_M119_REPORT "Reporting endstop status"
- #define MSG_ENDSTOP_HIT "TRIGGERED"
- #define MSG_ENDSTOP_OPEN "open"
- #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
- #define MSG_SD_INIT_FAIL "SD init fail"
- #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
- #define MSG_SD_OPENROOT_FAIL "openRoot failed"
- #define MSG_SD_CARD_OK "SD card ok"
- #define MSG_SD_WORKDIR_FAIL "workDir open failed"
- #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
- #define MSG_SD_FILE_OPENED "File opened: "
- #define MSG_SD_FILE_SELECTED "File selected"
- #define MSG_SD_WRITE_TO_FILE "Writing to file: "
- #define MSG_SD_PRINTING_BYTE "SD printing byte "
- #define MSG_SD_NOT_PRINTING "Not SD printing"
- #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
- #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
- #define MSG_STEPPER_TOO_HIGH "Steprate too high: "
- #define MSG_ENDSTOPS_HIT "endstops hit: "
- #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
- #define MSG_BABYSTEPPING_X "Babystepping X"
- #define MSG_BABYSTEPPING_Y "Babystepping Y"
- #define MSG_BABYSTEPPING_Z "Dostavovani Z"
- #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
- #define MSG_SET_HOME_OFFSETS "Nastav pocatek home"
- #define MSG_SET_ORIGIN "Nastav pocatek"
- #define MSG_SWITCH_PS_ON "Vypnout zdroj"
- #define MSG_SWITCH_PS_OFF "Zapnout zdroj"
- #define MSG_NOZZLE1 "Tryska2"
- #define MSG_NOZZLE2 "Tryska3"
- #define MSG_FLOW0 "Prutok 0"
- #define MSG_FLOW1 "Prutok 1"
- #define MSG_FLOW2 "Prutok 2"
- #define MSG_CONTROL "Kontrola"
- #define MSG_MIN " \002 Min"
- #define MSG_MAX " \002 Max"
- #define MSG_FACTOR " \002 Fact"
- #define MSG_MOTION "Pohyb"
- #define MSG_VOLUMETRIC "Filament"
- #define MSG_VOLUMETRIC_ENABLED "E in mm3"
- #define MSG_STORE_EPROM "Store memory"
- #define MSG_LOAD_EPROM "Ulozit pamet"
- #define MSG_RESTORE_FAILSAFE "Obnovit vychozi"
- #define MSG_REFRESH "\xF8" "Obnovit"
- #define MSG_INIT_SDCARD "Inic. SD"
- #define MSG_CNG_SDCARD "Vymenit SD"
- #define MSG_BABYSTEP_X "Babystep X"
- #define MSG_BABYSTEP_Y "Babystep Y"
- #define MSG_RECTRACT "Rectract"
- #define MSG_HOMEYZ "Kalibruj Z"
- #define MSG_HOMEYZ_PROGRESS "Kalibruje Z"
- #define MSG_HOMEYZ_DONE "Kalibracja OK"
- #define MSG_SELFTEST_ERROR "Selftest error !"
- #define MSG_SELFTEST_PLEASECHECK "Skontroluj :"
- #define MSG_SELFTEST_NOTCONNECTED "Nie podlaczono "
- #define MSG_SELFTEST_HEATERTHERMISTOR "Heater/Thermistor"
- #define MSG_SELFTEST_BEDHEATER "Bed / Heater"
- #define MSG_SELFTEST_WIRINGERROR "Blad polaczenia"
- #define MSG_SELFTEST_ENDSTOPS "Endstops"
- #define MSG_SELFTEST_MOTOR "Silnik"
- #define MSG_SELFTEST_ENDSTOP "Endstop"
- #define MSG_SELFTEST_ENDSTOP_NOTHIT "Endstop not hit"
- #define MSG_SELFTEST_OK "Self test OK"
- #define MSG_STATS_TOTALFILAMENT "Filament lacznie :"
- #define MSG_STATS_TOTALPRINTTIME "Czas calkowity :"
- #define MSG_STATS_FILAMENTUSED "Filament : "
- #define MSG_STATS_PRINTTIME "Czas druku : "
- #define MSG_SELFTEST_START "Self test start "
- #define MSG_SELFTEST_CHECK_ENDSTOPS "Kontrola endstops"
- #define MSG_SELFTEST_CHECK_HOTEND "Kontrola hotend "
- #define MSG_SELFTEST_CHECK_X "Kontrola X axis "
- #define MSG_SELFTEST_CHECK_Y "Kontrola Y axis "
- #define MSG_SELFTEST_CHECK_Z "Kontrola Z axis "
- #define MSG_SELFTEST_CHECK_BED "Kontrola bed "
- #define MSG_SELFTEST_CHECK_ALLCORRECT "Wszystko OK "
- #define MSG_SELFTEST "Selftest "
- #define MSG_SELFTEST_FAILED "Selftest nieudany"
- #define MSG_STATISTICS "Statystyka "
- #define MSG_USB_PRINTING "Druk z USB "
- #define MSG_SHOW_END_STOPS "Pokaz krancowki"
- #define MSG_CALIBRATE_BED "Kalibracja XYZ"
- #define MSG_CALIBRATE_BED_RESET "Reset kalibr. XYZ"
- #define MSG_MOVE_CARRIAGE_TO_THE_TOP "Kalibracja XYZ. Prosze przesunac os Z do gornej ramy. Potw. guzikiem."
- #define MSG_CONFIRM_NOZZLE_CLEAN "Dla prawidl. kalibracji prosze oczyscic dysze. Potw. guzikiem."
- #define MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Oba wozki dojechaly do gornej ramy?"
- #define MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Szukam kalibracyj."
- #define MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 "punktu podkladki"
- #define MSG_FIND_BED_OFFSET_AND_SKEW_LINE3 " z 4"
- #define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Ulepszam dokladnosc"
- #define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 "punktu kalibracyj."
- #define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE3 " z 9"
- #define MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Kalibr. XYZ nieudana. Kalibracyjny punkt podkladki nieznaleziony."
- #define MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Kalibracja XYZ niepowiedziona. Sprawdzic w instrukcji."
- #define MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "Kalibracja XYZ ok. Osie X/Y sa prostopadle."
- #define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "Kalibracja XYZ w porzadku. Osie X/Y lekko skosne."
- #define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "Osie X/Y sa mocno skosne. Skos bedzie aut. wyrownany przy druku."
- #define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "Kalibr. XYZ nieudana. Lewy przedni punkt zbyt do przodu. Wyrownac drukarke."
- #define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "Kalibr. XYZ nieudana. Prawy przedni punkt zbyt do przodu. Wyrownac drukarke."
- #define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "Kalibr. XYZ nieudana. Przed. punkty kalibr. zbyt do przodu. Wyrownac drukarke."
- #define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "Kalibracja XYZ niedokladna. Lewy przedni punkt zbyt wysuniety do przodu."
- #define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "Kalibracja XYZ niedokladna. Prawy przedni punkt zbyt wysuniety do przodu."
- #define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "Kalibr. XYZ niedokladna. Przednie punkty kalibr. Zbyt wys. do przodu."
- #define MSG_BED_LEVELING_FAILED_POINT_LOW "Kalibracja nieudana. Sensor nie dotknal. Zanieczysz. dysza? Czekam na reset."
- #define MSG_BED_LEVELING_FAILED_POINT_HIGH "Kalibracja Z nieudana. Sensor dotk. za wysoko. Czekam na reset."
- #define MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Kalibracja nieudana. Sensor odlaczony lub uszkodz. kabel. Czekam na reset."
- #define MSG_NEW_FIRMWARE_AVAILABLE "Wyszla nowa wersja firmware:"
- #define MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Prosze zaktualizowac"
- #define MSG_BABYSTEP_Z_NOT_SET "Drukarka nie byla kalibrowana. Wlaczyc kalibracyjny G-kod i dostroic Z."
- #define MSG_BED_CORRECTION_MENU "Korekta podkladki"
- #define MSG_BED_CORRECTION_LEFT "W lewo [um]"
- #define MSG_BED_CORRECTION_RIGHT "W prawo [um]"
- #define MSG_BED_CORRECTION_FRONT "Do przodu [um]"
- #define MSG_BED_CORRECTION_REAR "Do tylu [um]"
- #define MSG_BED_CORRECTION_RESET "Reset"
- #define MSG_MENU_CALIBRATION "Kalibracja"
- #define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "karta SD [normal]"
- #define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "karta SD[FlshAir]"
|