ultralcd.cpp 266 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126212721282129213021312132213321342135213621372138213921402141214221432144214521462147214821492150215121522153215421552156215721582159216021612162216321642165216621672168216921702171217221732174217521762177217821792180218121822183218421852186218721882189219021912192219321942195219621972198219922002201220222032204220522062207220822092210221122122213221422152216221722182219222022212222222322242225222622272228222922302231223222332234223522362237223822392240224122422243224422452246224722482249225022512252225322542255225622572258225922602261226222632264226522662267226822692270227122722273227422752276227722782279228022812282228322842285228622872288228922902291229222932294229522962297229822992300230123022303230423052306230723082309231023112312231323142315231623172318231923202321232223232324232523262327232823292330233123322333233423352336233723382339234023412342234323442345234623472348234923502351235223532354235523562357235823592360236123622363236423652366236723682369237023712372237323742375237623772378237923802381238223832384238523862387238823892390239123922393239423952396239723982399240024012402240324042405240624072408240924102411241224132414241524162417241824192420242124222423242424252426242724282429243024312432243324342435243624372438243924402441244224432444244524462447244824492450245124522453245424552456245724582459246024612462246324642465246624672468246924702471247224732474247524762477247824792480248124822483248424852486248724882489249024912492249324942495249624972498249925002501250225032504250525062507250825092510251125122513251425152516251725182519252025212522252325242525252625272528252925302531253225332534253525362537253825392540254125422543254425452546254725482549255025512552255325542555255625572558255925602561256225632564256525662567256825692570257125722573257425752576257725782579258025812582258325842585258625872588258925902591259225932594259525962597259825992600260126022603260426052606260726082609261026112612261326142615261626172618261926202621262226232624262526262627262826292630263126322633263426352636263726382639264026412642264326442645264626472648264926502651265226532654265526562657265826592660266126622663266426652666266726682669267026712672267326742675267626772678267926802681268226832684268526862687268826892690269126922693269426952696269726982699270027012702270327042705270627072708270927102711271227132714271527162717271827192720272127222723272427252726272727282729273027312732273327342735273627372738273927402741274227432744274527462747274827492750275127522753275427552756275727582759276027612762276327642765276627672768276927702771277227732774277527762777277827792780278127822783278427852786278727882789279027912792279327942795279627972798279928002801280228032804280528062807280828092810281128122813281428152816281728182819282028212822282328242825282628272828282928302831283228332834283528362837283828392840284128422843284428452846284728482849285028512852285328542855285628572858285928602861286228632864286528662867286828692870287128722873287428752876287728782879288028812882288328842885288628872888288928902891289228932894289528962897289828992900290129022903290429052906290729082909291029112912291329142915291629172918291929202921292229232924292529262927292829292930293129322933293429352936293729382939294029412942294329442945294629472948294929502951295229532954295529562957295829592960296129622963296429652966296729682969297029712972297329742975297629772978297929802981298229832984298529862987298829892990299129922993299429952996299729982999300030013002300330043005300630073008300930103011301230133014301530163017301830193020302130223023302430253026302730283029303030313032303330343035303630373038303930403041304230433044304530463047304830493050305130523053305430553056305730583059306030613062306330643065306630673068306930703071307230733074307530763077307830793080308130823083308430853086308730883089309030913092309330943095309630973098309931003101310231033104310531063107310831093110311131123113311431153116311731183119312031213122312331243125312631273128312931303131313231333134313531363137313831393140314131423143314431453146314731483149315031513152315331543155315631573158315931603161316231633164316531663167316831693170317131723173317431753176317731783179318031813182318331843185318631873188318931903191319231933194319531963197319831993200320132023203320432053206320732083209321032113212321332143215321632173218321932203221322232233224322532263227322832293230323132323233323432353236323732383239324032413242324332443245324632473248324932503251325232533254325532563257325832593260326132623263326432653266326732683269327032713272327332743275327632773278327932803281328232833284328532863287328832893290329132923293329432953296329732983299330033013302330333043305330633073308330933103311331233133314331533163317331833193320332133223323332433253326332733283329333033313332333333343335333633373338333933403341334233433344334533463347334833493350335133523353335433553356335733583359336033613362336333643365336633673368336933703371337233733374337533763377337833793380338133823383338433853386338733883389339033913392339333943395339633973398339934003401340234033404340534063407340834093410341134123413341434153416341734183419342034213422342334243425342634273428342934303431343234333434343534363437343834393440344134423443344434453446344734483449345034513452345334543455345634573458345934603461346234633464346534663467346834693470347134723473347434753476347734783479348034813482348334843485348634873488348934903491349234933494349534963497349834993500350135023503350435053506350735083509351035113512351335143515351635173518351935203521352235233524352535263527352835293530353135323533353435353536353735383539354035413542354335443545354635473548354935503551355235533554355535563557355835593560356135623563356435653566356735683569357035713572357335743575357635773578357935803581358235833584358535863587358835893590359135923593359435953596359735983599360036013602360336043605360636073608360936103611361236133614361536163617361836193620362136223623362436253626362736283629363036313632363336343635363636373638363936403641364236433644364536463647364836493650365136523653365436553656365736583659366036613662366336643665366636673668366936703671367236733674367536763677367836793680368136823683368436853686368736883689369036913692369336943695369636973698369937003701370237033704370537063707370837093710371137123713371437153716371737183719372037213722372337243725372637273728372937303731373237333734373537363737373837393740374137423743374437453746374737483749375037513752375337543755375637573758375937603761376237633764376537663767376837693770377137723773377437753776377737783779378037813782378337843785378637873788378937903791379237933794379537963797379837993800380138023803380438053806380738083809381038113812381338143815381638173818381938203821382238233824382538263827382838293830383138323833383438353836383738383839384038413842384338443845384638473848384938503851385238533854385538563857385838593860386138623863386438653866386738683869387038713872387338743875387638773878387938803881388238833884388538863887388838893890389138923893389438953896389738983899390039013902390339043905390639073908390939103911391239133914391539163917391839193920392139223923392439253926392739283929393039313932393339343935393639373938393939403941394239433944394539463947394839493950395139523953395439553956395739583959396039613962396339643965396639673968396939703971397239733974397539763977397839793980398139823983398439853986398739883989399039913992399339943995399639973998399940004001400240034004400540064007400840094010401140124013401440154016401740184019402040214022402340244025402640274028402940304031403240334034403540364037403840394040404140424043404440454046404740484049405040514052405340544055405640574058405940604061406240634064406540664067406840694070407140724073407440754076407740784079408040814082408340844085408640874088408940904091409240934094409540964097409840994100410141024103410441054106410741084109411041114112411341144115411641174118411941204121412241234124412541264127412841294130413141324133413441354136413741384139414041414142414341444145414641474148414941504151415241534154415541564157415841594160416141624163416441654166416741684169417041714172417341744175417641774178417941804181418241834184418541864187418841894190419141924193419441954196419741984199420042014202420342044205420642074208420942104211421242134214421542164217421842194220422142224223422442254226422742284229423042314232423342344235423642374238423942404241424242434244424542464247424842494250425142524253425442554256425742584259426042614262426342644265426642674268426942704271427242734274427542764277427842794280428142824283428442854286428742884289429042914292429342944295429642974298429943004301430243034304430543064307430843094310431143124313431443154316431743184319432043214322432343244325432643274328432943304331433243334334433543364337433843394340434143424343434443454346434743484349435043514352435343544355435643574358435943604361436243634364436543664367436843694370437143724373437443754376437743784379438043814382438343844385438643874388438943904391439243934394439543964397439843994400440144024403440444054406440744084409441044114412441344144415441644174418441944204421442244234424442544264427442844294430443144324433443444354436443744384439444044414442444344444445444644474448444944504451445244534454445544564457445844594460446144624463446444654466446744684469447044714472447344744475447644774478447944804481448244834484448544864487448844894490449144924493449444954496449744984499450045014502450345044505450645074508450945104511451245134514451545164517451845194520452145224523452445254526452745284529453045314532453345344535453645374538453945404541454245434544454545464547454845494550455145524553455445554556455745584559456045614562456345644565456645674568456945704571457245734574457545764577457845794580458145824583458445854586458745884589459045914592459345944595459645974598459946004601460246034604460546064607460846094610461146124613461446154616461746184619462046214622462346244625462646274628462946304631463246334634463546364637463846394640464146424643464446454646464746484649465046514652465346544655465646574658465946604661466246634664466546664667466846694670467146724673467446754676467746784679468046814682468346844685468646874688468946904691469246934694469546964697469846994700470147024703470447054706470747084709471047114712471347144715471647174718471947204721472247234724472547264727472847294730473147324733473447354736473747384739474047414742474347444745474647474748474947504751475247534754475547564757475847594760476147624763476447654766476747684769477047714772477347744775477647774778477947804781478247834784478547864787478847894790479147924793479447954796479747984799480048014802480348044805480648074808480948104811481248134814481548164817481848194820482148224823482448254826482748284829483048314832483348344835483648374838483948404841484248434844484548464847484848494850485148524853485448554856485748584859486048614862486348644865486648674868486948704871487248734874487548764877487848794880488148824883488448854886488748884889489048914892489348944895489648974898489949004901490249034904490549064907490849094910491149124913491449154916491749184919492049214922492349244925492649274928492949304931493249334934493549364937493849394940494149424943494449454946494749484949495049514952495349544955495649574958495949604961496249634964496549664967496849694970497149724973497449754976497749784979498049814982498349844985498649874988498949904991499249934994499549964997499849995000500150025003500450055006500750085009501050115012501350145015501650175018501950205021502250235024502550265027502850295030503150325033503450355036503750385039504050415042504350445045504650475048504950505051505250535054505550565057505850595060506150625063506450655066506750685069507050715072507350745075507650775078507950805081508250835084508550865087508850895090509150925093509450955096509750985099510051015102510351045105510651075108510951105111511251135114511551165117511851195120512151225123512451255126512751285129513051315132513351345135513651375138513951405141514251435144514551465147514851495150515151525153515451555156515751585159516051615162516351645165516651675168516951705171517251735174517551765177517851795180518151825183518451855186518751885189519051915192519351945195519651975198519952005201520252035204520552065207520852095210521152125213521452155216521752185219522052215222522352245225522652275228522952305231523252335234523552365237523852395240524152425243524452455246524752485249525052515252525352545255525652575258525952605261526252635264526552665267526852695270527152725273527452755276527752785279528052815282528352845285528652875288528952905291529252935294529552965297529852995300530153025303530453055306530753085309531053115312531353145315531653175318531953205321532253235324532553265327532853295330533153325333533453355336533753385339534053415342534353445345534653475348534953505351535253535354535553565357535853595360536153625363536453655366536753685369537053715372537353745375537653775378537953805381538253835384538553865387538853895390539153925393539453955396539753985399540054015402540354045405540654075408540954105411541254135414541554165417541854195420542154225423542454255426542754285429543054315432543354345435543654375438543954405441544254435444544554465447544854495450545154525453545454555456545754585459546054615462546354645465546654675468546954705471547254735474547554765477547854795480548154825483548454855486548754885489549054915492549354945495549654975498549955005501550255035504550555065507550855095510551155125513551455155516551755185519552055215522552355245525552655275528552955305531553255335534553555365537553855395540554155425543554455455546554755485549555055515552555355545555555655575558555955605561556255635564556555665567556855695570557155725573557455755576557755785579558055815582558355845585558655875588558955905591559255935594559555965597559855995600560156025603560456055606560756085609561056115612561356145615561656175618561956205621562256235624562556265627562856295630563156325633563456355636563756385639564056415642564356445645564656475648564956505651565256535654565556565657565856595660566156625663566456655666566756685669567056715672567356745675567656775678567956805681568256835684568556865687568856895690569156925693569456955696569756985699570057015702570357045705570657075708570957105711571257135714571557165717571857195720572157225723572457255726572757285729573057315732573357345735573657375738573957405741574257435744574557465747574857495750575157525753575457555756575757585759576057615762576357645765576657675768576957705771577257735774577557765777577857795780578157825783578457855786578757885789579057915792579357945795579657975798579958005801580258035804580558065807580858095810581158125813581458155816581758185819582058215822582358245825582658275828582958305831583258335834583558365837583858395840584158425843584458455846584758485849585058515852585358545855585658575858585958605861586258635864586558665867586858695870587158725873587458755876587758785879588058815882588358845885588658875888588958905891589258935894589558965897589858995900590159025903590459055906590759085909591059115912591359145915591659175918591959205921592259235924592559265927592859295930593159325933593459355936593759385939594059415942594359445945594659475948594959505951595259535954595559565957595859595960596159625963596459655966596759685969597059715972597359745975597659775978597959805981598259835984598559865987598859895990599159925993599459955996599759985999600060016002600360046005600660076008600960106011601260136014601560166017601860196020602160226023602460256026602760286029603060316032603360346035603660376038603960406041604260436044604560466047604860496050605160526053605460556056605760586059606060616062606360646065606660676068606960706071607260736074607560766077607860796080608160826083608460856086608760886089609060916092609360946095609660976098609961006101610261036104610561066107610861096110611161126113611461156116611761186119612061216122612361246125612661276128612961306131613261336134613561366137613861396140614161426143614461456146614761486149615061516152615361546155615661576158615961606161616261636164616561666167616861696170617161726173617461756176617761786179618061816182618361846185618661876188618961906191619261936194619561966197619861996200620162026203620462056206620762086209621062116212621362146215621662176218621962206221622262236224622562266227622862296230623162326233623462356236623762386239624062416242624362446245624662476248624962506251625262536254625562566257625862596260626162626263626462656266626762686269627062716272627362746275627662776278627962806281628262836284628562866287628862896290629162926293629462956296629762986299630063016302630363046305630663076308630963106311631263136314631563166317631863196320632163226323632463256326632763286329633063316332633363346335633663376338633963406341634263436344634563466347634863496350635163526353635463556356635763586359636063616362636363646365636663676368636963706371637263736374637563766377637863796380638163826383638463856386638763886389639063916392639363946395639663976398639964006401640264036404640564066407640864096410641164126413641464156416641764186419642064216422642364246425642664276428642964306431643264336434643564366437643864396440644164426443644464456446644764486449645064516452645364546455645664576458645964606461646264636464646564666467646864696470647164726473647464756476647764786479648064816482648364846485648664876488648964906491649264936494649564966497649864996500650165026503650465056506650765086509651065116512651365146515651665176518651965206521652265236524652565266527652865296530653165326533653465356536653765386539654065416542654365446545654665476548654965506551655265536554655565566557655865596560656165626563656465656566656765686569657065716572657365746575657665776578657965806581658265836584658565866587658865896590659165926593659465956596659765986599660066016602660366046605660666076608660966106611661266136614661566166617661866196620662166226623662466256626662766286629663066316632663366346635663666376638663966406641664266436644664566466647664866496650665166526653665466556656665766586659666066616662666366646665666666676668666966706671667266736674667566766677667866796680668166826683668466856686668766886689669066916692669366946695669666976698669967006701670267036704670567066707670867096710671167126713671467156716671767186719672067216722672367246725672667276728672967306731673267336734673567366737673867396740674167426743674467456746674767486749675067516752675367546755675667576758675967606761676267636764676567666767676867696770677167726773677467756776677767786779678067816782678367846785678667876788678967906791679267936794679567966797679867996800680168026803680468056806680768086809681068116812681368146815681668176818681968206821682268236824682568266827682868296830683168326833683468356836683768386839684068416842684368446845684668476848684968506851685268536854685568566857685868596860686168626863686468656866686768686869687068716872687368746875687668776878687968806881688268836884688568866887688868896890689168926893689468956896689768986899690069016902690369046905690669076908690969106911691269136914691569166917691869196920692169226923692469256926692769286929693069316932693369346935693669376938693969406941694269436944694569466947694869496950695169526953695469556956695769586959696069616962696369646965696669676968696969706971697269736974697569766977697869796980698169826983698469856986698769886989699069916992699369946995699669976998699970007001700270037004700570067007700870097010701170127013701470157016701770187019702070217022702370247025702670277028702970307031703270337034703570367037703870397040704170427043704470457046704770487049705070517052705370547055705670577058705970607061706270637064706570667067706870697070707170727073707470757076707770787079708070817082708370847085708670877088708970907091709270937094709570967097709870997100710171027103710471057106710771087109711071117112711371147115711671177118711971207121712271237124712571267127712871297130713171327133713471357136713771387139714071417142714371447145714671477148714971507151715271537154715571567157715871597160716171627163716471657166716771687169717071717172717371747175717671777178717971807181718271837184718571867187718871897190719171927193719471957196719771987199720072017202720372047205720672077208720972107211721272137214721572167217721872197220722172227223722472257226722772287229723072317232723372347235723672377238723972407241724272437244724572467247724872497250725172527253725472557256725772587259726072617262726372647265726672677268726972707271727272737274727572767277727872797280728172827283728472857286728772887289729072917292729372947295729672977298729973007301730273037304730573067307730873097310731173127313731473157316731773187319732073217322732373247325732673277328732973307331733273337334733573367337733873397340734173427343734473457346734773487349735073517352735373547355735673577358735973607361736273637364736573667367736873697370737173727373737473757376737773787379738073817382738373847385738673877388738973907391739273937394739573967397739873997400740174027403740474057406740774087409741074117412741374147415741674177418741974207421742274237424742574267427742874297430743174327433743474357436743774387439744074417442744374447445744674477448744974507451745274537454745574567457745874597460746174627463746474657466746774687469747074717472747374747475747674777478747974807481748274837484748574867487748874897490749174927493749474957496749774987499750075017502750375047505750675077508750975107511751275137514751575167517751875197520752175227523752475257526752775287529753075317532753375347535753675377538753975407541754275437544754575467547754875497550755175527553755475557556755775587559756075617562756375647565756675677568756975707571757275737574757575767577757875797580758175827583758475857586758775887589759075917592759375947595759675977598759976007601760276037604760576067607760876097610761176127613761476157616761776187619762076217622762376247625762676277628762976307631763276337634763576367637763876397640764176427643764476457646764776487649765076517652765376547655765676577658765976607661766276637664766576667667766876697670767176727673767476757676767776787679768076817682768376847685768676877688768976907691769276937694769576967697769876997700770177027703770477057706770777087709771077117712771377147715771677177718771977207721772277237724772577267727772877297730773177327733773477357736773777387739774077417742774377447745774677477748774977507751775277537754775577567757775877597760776177627763776477657766776777687769777077717772777377747775777677777778777977807781778277837784778577867787778877897790779177927793779477957796779777987799780078017802780378047805780678077808780978107811781278137814781578167817781878197820782178227823782478257826782778287829783078317832783378347835783678377838783978407841784278437844784578467847784878497850785178527853785478557856785778587859786078617862786378647865786678677868786978707871787278737874787578767877787878797880788178827883788478857886788778887889789078917892789378947895789678977898789979007901790279037904790579067907790879097910791179127913791479157916791779187919792079217922792379247925792679277928792979307931793279337934793579367937793879397940794179427943794479457946794779487949795079517952795379547955795679577958795979607961796279637964796579667967796879697970797179727973797479757976797779787979798079817982798379847985798679877988798979907991799279937994799579967997799879998000800180028003800480058006800780088009801080118012801380148015801680178018801980208021802280238024802580268027802880298030803180328033803480358036803780388039804080418042804380448045804680478048804980508051805280538054805580568057805880598060806180628063806480658066806780688069807080718072807380748075807680778078807980808081808280838084808580868087808880898090809180928093809480958096809780988099810081018102810381048105810681078108810981108111811281138114811581168117811881198120812181228123812481258126812781288129813081318132813381348135813681378138813981408141814281438144814581468147814881498150815181528153815481558156815781588159816081618162816381648165816681678168816981708171817281738174817581768177817881798180818181828183818481858186818781888189819081918192819381948195819681978198819982008201820282038204820582068207820882098210821182128213821482158216821782188219822082218222822382248225822682278228822982308231823282338234823582368237823882398240824182428243824482458246824782488249825082518252825382548255825682578258825982608261826282638264826582668267826882698270827182728273827482758276827782788279828082818282828382848285828682878288828982908291829282938294829582968297829882998300830183028303830483058306830783088309831083118312831383148315831683178318831983208321832283238324832583268327832883298330833183328333833483358336833783388339834083418342834383448345834683478348834983508351835283538354835583568357835883598360836183628363836483658366836783688369837083718372837383748375837683778378837983808381838283838384838583868387838883898390839183928393839483958396839783988399840084018402840384048405840684078408840984108411841284138414841584168417841884198420842184228423842484258426842784288429843084318432843384348435843684378438843984408441844284438444844584468447844884498450845184528453845484558456845784588459846084618462846384648465846684678468846984708471847284738474847584768477847884798480848184828483848484858486848784888489849084918492849384948495849684978498849985008501850285038504850585068507850885098510851185128513851485158516851785188519852085218522852385248525852685278528852985308531853285338534853585368537853885398540854185428543854485458546854785488549855085518552855385548555855685578558855985608561856285638564856585668567856885698570857185728573857485758576857785788579858085818582858385848585858685878588858985908591859285938594859585968597859885998600860186028603860486058606860786088609861086118612861386148615861686178618861986208621862286238624862586268627862886298630863186328633863486358636863786388639864086418642864386448645864686478648864986508651865286538654865586568657865886598660866186628663866486658666866786688669867086718672867386748675867686778678867986808681868286838684868586868687868886898690869186928693869486958696869786988699870087018702870387048705870687078708870987108711871287138714871587168717871887198720872187228723872487258726872787288729873087318732873387348735873687378738873987408741874287438744874587468747874887498750875187528753875487558756875787588759876087618762876387648765876687678768876987708771877287738774877587768777877887798780878187828783878487858786878787888789879087918792879387948795879687978798879988008801880288038804880588068807880888098810881188128813881488158816881788188819882088218822882388248825882688278828882988308831883288338834883588368837883888398840884188428843884488458846884788488849885088518852885388548855885688578858885988608861886288638864886588668867886888698870887188728873887488758876887788788879888088818882888388848885888688878888888988908891889288938894889588968897889888998900890189028903890489058906890789088909891089118912891389148915891689178918891989208921892289238924892589268927892889298930893189328933893489358936893789388939894089418942894389448945894689478948894989508951895289538954895589568957895889598960896189628963896489658966896789688969897089718972897389748975897689778978897989808981898289838984898589868987898889898990899189928993899489958996899789988999900090019002900390049005900690079008900990109011901290139014901590169017901890199020902190229023902490259026902790289029903090319032903390349035903690379038903990409041904290439044904590469047904890499050905190529053905490559056905790589059906090619062906390649065906690679068906990709071907290739074907590769077907890799080908190829083908490859086908790889089909090919092909390949095909690979098909991009101910291039104910591069107910891099110911191129113911491159116911791189119912091219122912391249125912691279128912991309131913291339134913591369137913891399140914191429143914491459146914791489149915091519152915391549155915691579158915991609161916291639164916591669167916891699170917191729173917491759176917791789179918091819182918391849185918691879188918991909191919291939194919591969197919891999200920192029203920492059206920792089209921092119212921392149215921692179218921992209221922292239224922592269227922892299230923192329233923492359236
  1. //! @file
  2. //! @date Aug 28, 2019
  3. //! @author mkbel
  4. //! @brief LCD
  5. #include "temperature.h"
  6. #include "ultralcd.h"
  7. #include "fsensor.h"
  8. #include "Marlin.h"
  9. #include "language.h"
  10. #include "cardreader.h"
  11. #include "temperature.h"
  12. #include "stepper.h"
  13. #include "ConfigurationStore.h"
  14. #include "printers.h"
  15. #include <string.h>
  16. #include "lcd.h"
  17. #include "menu.h"
  18. #include "backlight.h"
  19. #include "util.h"
  20. #include "mesh_bed_leveling.h"
  21. #include "mesh_bed_calibration.h"
  22. //#include "Configuration.h"
  23. #include "cmdqueue.h"
  24. #include "SdFatUtil.h"
  25. #ifdef FILAMENT_SENSOR
  26. #include "pat9125.h"
  27. #include "fsensor.h"
  28. #endif //FILAMENT_SENSOR
  29. #ifdef TMC2130
  30. #include "tmc2130.h"
  31. #endif //TMC2130
  32. #include "sound.h"
  33. #include "mmu.h"
  34. #include "static_assert.h"
  35. #include "io_atmega2560.h"
  36. #include "first_lay_cal.h"
  37. #include "fsensor.h"
  38. #include "adc.h"
  39. #include "config.h"
  40. #ifndef LA_NOCOMPAT
  41. #include "la10compat.h"
  42. #endif
  43. int scrollstuff = 0;
  44. char longFilenameOLD[LONG_FILENAME_LENGTH];
  45. static void lcd_sd_updir();
  46. static void lcd_mesh_bed_leveling_settings();
  47. static void lcd_backlight_menu();
  48. int8_t ReInitLCD = 0;
  49. int8_t SilentModeMenu = SILENT_MODE_OFF;
  50. uint8_t SilentModeMenu_MMU = 1; //activate mmu unit stealth mode
  51. int8_t FSensorStateMenu = 1;
  52. #ifdef IR_SENSOR_ANALOG
  53. bool bMenuFSDetect=false;
  54. #endif //IR_SENSOR_ANALOG
  55. #ifdef SDCARD_SORT_ALPHA
  56. bool presort_flag = false;
  57. #endif
  58. LcdCommands lcd_commands_type = LcdCommands::Idle;
  59. static uint8_t lcd_commands_step = 0;
  60. CustomMsg custom_message_type = CustomMsg::Status;
  61. unsigned int custom_message_state = 0;
  62. bool isPrintPaused = false;
  63. uint8_t farm_mode = 0;
  64. int farm_no = 0;
  65. int farm_timer = 8;
  66. uint8_t farm_status = 0;
  67. bool printer_connected = true;
  68. unsigned long display_time; //just timer for showing pid finished message on lcd;
  69. float pid_temp = DEFAULT_PID_TEMP;
  70. static bool forceMenuExpire = false;
  71. static bool lcd_autoDeplete;
  72. static float manual_feedrate[] = MANUAL_FEEDRATE;
  73. /* !Configuration settings */
  74. uint8_t lcd_status_message_level;
  75. char lcd_status_message[LCD_WIDTH + 1] = ""; //////WELCOME!
  76. unsigned char firstrun = 1;
  77. static uint8_t lay1cal_filament = 0;
  78. static const char separator[] PROGMEM = "--------------------";
  79. /** forward declarations **/
  80. static const char* lcd_display_message_fullscreen_nonBlocking_P(const char *msg, uint8_t &nlines);
  81. // void copy_and_scalePID_i();
  82. // void copy_and_scalePID_d();
  83. /* Different menus */
  84. //static void lcd_status_screen(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
  85. #if (LANG_MODE != 0)
  86. static void lcd_language_menu();
  87. #endif
  88. static void lcd_main_menu();
  89. static void lcd_tune_menu();
  90. //static void lcd_move_menu();
  91. static void lcd_settings_menu();
  92. static void lcd_calibration_menu();
  93. static void lcd_control_temperature_menu();
  94. static void lcd_settings_linearity_correction_menu_save();
  95. static void prusa_stat_printerstatus(int _status);
  96. static void prusa_stat_farm_number();
  97. static void prusa_stat_diameter();
  98. static void prusa_stat_temperatures();
  99. static void prusa_stat_printinfo();
  100. static void lcd_farm_no();
  101. static void lcd_menu_xyz_y_min();
  102. static void lcd_menu_xyz_skew();
  103. static void lcd_menu_xyz_offset();
  104. static void lcd_menu_fails_stats_mmu();
  105. static void lcd_menu_fails_stats_mmu_print();
  106. static void lcd_menu_fails_stats_mmu_total();
  107. static void mmu_unload_filament();
  108. static void lcd_v2_calibration();
  109. //static void lcd_menu_show_sensors_state(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
  110. static void mmu_fil_eject_menu();
  111. static void mmu_load_to_nozzle_menu();
  112. static void preheat_or_continue();
  113. #ifdef MMU_HAS_CUTTER
  114. static void mmu_cut_filament_menu();
  115. #endif //MMU_HAS_CUTTER
  116. #if defined(TMC2130) || defined(FILAMENT_SENSOR)
  117. static void lcd_menu_fails_stats();
  118. #endif //TMC2130 or FILAMENT_SENSOR
  119. #ifdef TMC2130
  120. static void lcd_belttest_v();
  121. #endif //TMC2130
  122. static void lcd_selftest_v();
  123. #ifdef TMC2130
  124. static void reset_crash_det(unsigned char axis);
  125. static bool lcd_selfcheck_axis_sg(unsigned char axis);
  126. static bool lcd_selfcheck_axis(int _axis, int _travel);
  127. #else
  128. static bool lcd_selfcheck_axis(int _axis, int _travel);
  129. static bool lcd_selfcheck_pulleys(int axis);
  130. #endif //TMC2130
  131. static bool lcd_selfcheck_endstops();
  132. static bool lcd_selfcheck_check_heater(bool _isbed);
  133. enum class TestScreen : uint_least8_t
  134. {
  135. ExtruderFan,
  136. PrintFan,
  137. FansOk,
  138. EndStops,
  139. AxisX,
  140. AxisY,
  141. AxisZ,
  142. Bed,
  143. Hotend,
  144. HotendOk,
  145. Fsensor,
  146. FsensorOk,
  147. AllCorrect,
  148. Failed,
  149. Home,
  150. };
  151. enum class TestError : uint_least8_t
  152. {
  153. Heater,
  154. Bed,
  155. Endstops,
  156. Motor,
  157. Endstop,
  158. PrintFan,
  159. ExtruderFan,
  160. Pulley,
  161. Axis,
  162. SwappedFan,
  163. WiringFsensor,
  164. TriggeringFsensor,
  165. FsensorLevel
  166. };
  167. static int lcd_selftest_screen(TestScreen screen, int _progress, int _progress_scale, bool _clear, int _delay);
  168. static void lcd_selftest_screen_step(int _row, int _col, int _state, const char *_name, const char *_indicator);
  169. static bool lcd_selftest_manual_fan_check(int _fan, bool check_opposite,
  170. bool _default=false);
  171. #ifdef FANCHECK
  172. /** Enumerate for lcd_selftest_fan_auto function.
  173. */
  174. enum class FanCheck : uint_least8_t {
  175. Success,
  176. PrintFan,
  177. ExtruderFan,
  178. SwappedFan,
  179. };
  180. /**
  181. * Try to check fan working and wiring.
  182. *
  183. * @param _fan i fan number 0 means extruder fan, 1 means print fan.
  184. *
  185. * @returns a TestError noerror, extruderFan, printFan or swappedFan.
  186. */
  187. static FanCheck lcd_selftest_fan_auto(int _fan);
  188. #endif //FANCHECK
  189. #ifdef PAT9125
  190. static bool lcd_selftest_fsensor();
  191. #endif //PAT9125
  192. static bool selftest_irsensor();
  193. #ifdef IR_SENSOR_ANALOG
  194. static bool lcd_selftest_IRsensor(bool bStandalone=false);
  195. static void lcd_detect_IRsensor();
  196. #endif //IR_SENSOR_ANALOG
  197. static void lcd_selftest_error(TestError error, const char *_error_1, const char *_error_2);
  198. static void lcd_colorprint_change();
  199. #ifdef SNMM
  200. static int get_ext_nr();
  201. #endif //SNMM
  202. #if defined (SNMM) || defined(SNMM_V2)
  203. static void fil_load_menu();
  204. static void fil_unload_menu();
  205. #endif // SNMM || SNMM_V2
  206. static void lcd_disable_farm_mode();
  207. static void lcd_set_fan_check();
  208. static void lcd_cutter_enabled();
  209. #ifdef SNMM
  210. static char snmm_stop_print_menu();
  211. #endif //SNMM
  212. #ifdef SDCARD_SORT_ALPHA
  213. static void lcd_sort_type_set();
  214. #endif
  215. static void lcd_babystep_z();
  216. static void lcd_send_status();
  217. #ifdef FARM_CONNECT_MESSAGE
  218. static void lcd_connect_printer();
  219. #endif //FARM_CONNECT_MESSAGE
  220. //! Beware: has side effects - forces lcd_draw_update to 2, which means clear the display
  221. void lcd_finishstatus();
  222. static void lcd_sdcard_menu();
  223. static void lcd_sheet_menu();
  224. #ifdef DELTA_CALIBRATION_MENU
  225. static void lcd_delta_calibrate_menu();
  226. #endif // DELTA_CALIBRATION_MENU
  227. /* Different types of actions that can be used in menu items. */
  228. static void menu_action_sdfile(const char* filename);
  229. static void menu_action_sddirectory(const char* filename);
  230. #define ENCODER_FEEDRATE_DEADZONE 10
  231. #define STATE_NA 255
  232. #define STATE_OFF 0
  233. #define STATE_ON 1
  234. /*
  235. #define MENU_ITEM(type, label, args...) do { \
  236. if (menu_item == menu_line) { \
  237. if (lcd_draw_update) { \
  238. const char* _label_pstr = (label); \
  239. if (lcd_encoder == menu_item) { \
  240. lcd_implementation_drawmenu_ ## type ## _selected (menu_row, _label_pstr , ## args ); \
  241. }else{\
  242. lcd_implementation_drawmenu_ ## type (menu_row, _label_pstr , ## args ); \
  243. }\
  244. }\
  245. if (menu_clicked && (lcd_encoder == menu_item)) {\
  246. lcd_quick_feedback(); \
  247. menu_action_ ## type ( args ); \
  248. return;\
  249. }\
  250. }\
  251. menu_item++;\
  252. } while(0)
  253. */
  254. #if (SDCARDDETECT > 0)
  255. bool lcd_oldcardstatus;
  256. #endif
  257. uint8_t selected_sheet = 0;
  258. bool ignore_click = false;
  259. bool wait_for_unclick;
  260. // place-holders for Ki and Kd edits
  261. #ifdef PIDTEMP
  262. // float raw_Ki, raw_Kd;
  263. #endif
  264. bool bMain; // flag (i.e. 'fake parameter') for 'lcd_sdcard_menu()' function
  265. bool bSettings; // flag (i.e. 'fake parameter') for 'lcd_hw_setup_menu()' function
  266. const char STR_SEPARATOR[] PROGMEM = "------------";
  267. static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* filename, char* longFilename)
  268. {
  269. char c;
  270. int enc_dif = lcd_encoder_diff / ENCODER_PULSES_PER_STEP;
  271. uint8_t n = LCD_WIDTH - 1;
  272. for(uint_least8_t g = 0; g<4;g++){
  273. lcd_set_cursor(0, g);
  274. lcd_print(' ');
  275. }
  276. lcd_set_cursor(0, row);
  277. lcd_print('>');
  278. if (longFilename[0] == '\0')
  279. {
  280. longFilename = filename;
  281. }
  282. int i = 1;
  283. int j = 0;
  284. char* longFilenameTMP = longFilename;
  285. while((c = *longFilenameTMP) != '\0')
  286. {
  287. lcd_set_cursor(i, row);
  288. lcd_print(c);
  289. i++;
  290. longFilenameTMP++;
  291. if(i==LCD_WIDTH){
  292. i=1;
  293. j++;
  294. longFilenameTMP = longFilename + j;
  295. n = LCD_WIDTH - 1;
  296. for(int g = 0; g<300 ;g++){
  297. manage_heater();
  298. if(LCD_CLICKED || ( enc_dif != (lcd_encoder_diff / ENCODER_PULSES_PER_STEP))){
  299. longFilenameTMP = longFilename;
  300. *(longFilenameTMP + LCD_WIDTH - 2) = '\0';
  301. i = 1;
  302. j = 0;
  303. break;
  304. }else{
  305. if (j == 1) _delay_ms(3); //wait around 1.2 s to start scrolling text
  306. _delay_ms(1); //then scroll with redrawing every 300 ms
  307. }
  308. }
  309. }
  310. }
  311. if(c!='\0'){
  312. lcd_set_cursor(i, row);
  313. lcd_print(c);
  314. i++;
  315. }
  316. n=n-i+1;
  317. while(n--)
  318. lcd_print(' ');
  319. }
  320. static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* filename, char* longFilename)
  321. {
  322. char c;
  323. uint8_t n = LCD_WIDTH - 1;
  324. lcd_set_cursor(0, row);
  325. lcd_print(' ');
  326. if (longFilename[0] != '\0')
  327. {
  328. filename = longFilename;
  329. longFilename[LCD_WIDTH-1] = '\0';
  330. }
  331. while( ((c = *filename) != '\0') && (n>0) )
  332. {
  333. lcd_print(c);
  334. filename++;
  335. n--;
  336. }
  337. while(n--)
  338. lcd_print(' ');
  339. }
  340. static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* filename, char* longFilename)
  341. {
  342. char c;
  343. uint8_t n = LCD_WIDTH - 2;
  344. lcd_set_cursor(0, row);
  345. lcd_print('>');
  346. lcd_print(LCD_STR_FOLDER[0]);
  347. if (longFilename[0] != '\0')
  348. {
  349. filename = longFilename;
  350. longFilename[LCD_WIDTH-2] = '\0';
  351. }
  352. while( ((c = *filename) != '\0') && (n>0) )
  353. {
  354. lcd_print(c);
  355. filename++;
  356. n--;
  357. }
  358. while(n--)
  359. lcd_print(' ');
  360. }
  361. static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* filename, char* longFilename)
  362. {
  363. char c;
  364. uint8_t n = LCD_WIDTH - 2;
  365. lcd_set_cursor(0, row);
  366. lcd_print(' ');
  367. lcd_print(LCD_STR_FOLDER[0]);
  368. if (longFilename[0] != '\0')
  369. {
  370. filename = longFilename;
  371. longFilename[LCD_WIDTH-2] = '\0';
  372. }
  373. while( ((c = *filename) != '\0') && (n>0) )
  374. {
  375. lcd_print(c);
  376. filename++;
  377. n--;
  378. }
  379. while(n--)
  380. lcd_print(' ');
  381. }
  382. #define MENU_ITEM_SDDIR(str_fn, str_fnl) do { if (menu_item_sddir(str_fn, str_fnl)) return; } while (0)
  383. //#define MENU_ITEM_SDDIR(str, str_fn, str_fnl) MENU_ITEM(sddirectory, str, str_fn, str_fnl)
  384. //extern uint8_t menu_item_sddir(const char* str, const char* str_fn, char* str_fnl);
  385. #define MENU_ITEM_SDFILE(str, str_fn, str_fnl) do { if (menu_item_sdfile(str, str_fn, str_fnl)) return; } while (0)
  386. //#define MENU_ITEM_SDFILE(str, str_fn, str_fnl) MENU_ITEM(sdfile, str, str_fn, str_fnl)
  387. //extern uint8_t menu_item_sdfile(const char* str, const char* str_fn, char* str_fnl);
  388. uint8_t menu_item_sddir(const char* str_fn, char* str_fnl)
  389. {
  390. #ifdef NEW_SD_MENU
  391. // str_fnl[18] = 0;
  392. // printf_P(PSTR("menu dir %d '%s' '%s'\n"), menu_row, str_fn, str_fnl);
  393. if (menu_item == menu_line)
  394. {
  395. if (lcd_draw_update)
  396. {
  397. lcd_set_cursor(0, menu_row);
  398. int cnt = lcd_printf_P(PSTR("%c%c%-18s"), (lcd_encoder == menu_item)?'>':' ', LCD_STR_FOLDER[0], str_fnl[0]?str_fnl:str_fn);
  399. // int cnt = lcd_printf_P(PSTR("%c%c%-18s"), (lcd_encoder == menu_item)?'>':' ', LCD_STR_FOLDER[0], str_fn);
  400. }
  401. if (menu_clicked && (lcd_encoder == menu_item))
  402. {
  403. uint8_t depth = (uint8_t)card.getWorkDirDepth();
  404. strcpy(dir_names[depth], str_fn);
  405. // printf_P(PSTR("%s\n"), dir_names[depth]);
  406. card.chdir(str_fn);
  407. lcd_encoder = 0;
  408. return menu_item_ret();
  409. }
  410. }
  411. menu_item++;
  412. return 0;
  413. #else //NEW_SD_MENU
  414. if (menu_item == menu_line)
  415. {
  416. if (lcd_draw_update)
  417. {
  418. if (lcd_encoder == menu_item)
  419. lcd_implementation_drawmenu_sddirectory_selected(menu_row, str_fn, str_fnl);
  420. else
  421. lcd_implementation_drawmenu_sddirectory(menu_row, str_fn, str_fnl);
  422. }
  423. if (menu_clicked && (lcd_encoder == menu_item))
  424. {
  425. menu_clicked = false;
  426. lcd_update_enabled = 0;
  427. menu_action_sddirectory(str_fn);
  428. lcd_update_enabled = 1;
  429. return menu_item_ret();
  430. }
  431. }
  432. menu_item++;
  433. return 0;
  434. #endif //NEW_SD_MENU
  435. }
  436. static uint8_t menu_item_sdfile(const char*
  437. #ifdef NEW_SD_MENU
  438. str
  439. #endif //NEW_SD_MENU
  440. ,const char* str_fn, char* str_fnl)
  441. {
  442. #ifdef NEW_SD_MENU
  443. // printf_P(PSTR("menu sdfile\n"));
  444. // str_fnl[19] = 0;
  445. // printf_P(PSTR("menu file %d '%s' '%s'\n"), menu_row, str_fn, str_fnl);
  446. if (menu_item == menu_line)
  447. {
  448. if (lcd_draw_update)
  449. {
  450. // printf_P(PSTR("menu file %d %d '%s'\n"), menu_row, menuData.sdcard_menu.viewState, str_fnl[0]?str_fnl:str_fn);
  451. lcd_set_cursor(0, menu_row);
  452. /* if (lcd_encoder == menu_item)
  453. {
  454. lcd_printf_P(PSTR("%c%-19s"), (lcd_encoder == menu_item)?'>':' ', (str_fnl[0]?str_fnl:str_fn) + 1);
  455. if (menuData.sdcard_menu.viewState == 0)
  456. {
  457. menuData.sdcard_menu.viewState++;
  458. lcd_printf_P(PSTR("%c%-19s"), (lcd_encoder == menu_item)?'>':' ', (str_fnl[0]?str_fnl:str_fn) + 1);
  459. }
  460. else if (menuData.sdcard_menu.viewState == 1)
  461. {
  462. lcd_printf_P(PSTR("%c%-19s"), (lcd_encoder == menu_item)?'>':' ', (str_fnl[0]?str_fnl:str_fn) + 2);
  463. }
  464. }
  465. else*/
  466. {
  467. str_fnl[19] = 0;
  468. lcd_printf_P(PSTR("%c%-19s"), (lcd_encoder == menu_item)?'>':' ', str_fnl[0]?str_fnl:str_fn);
  469. }
  470. // int cnt = lcd_printf_P(PSTR("%c%-19s"), (lcd_encoder == menu_item)?'>':' ', str_fnl);
  471. // int cnt = lcd_printf_P(PSTR("%cTESTIK.gcode"), (lcd_encoder == menu_item)?'>':' ');
  472. }
  473. if (menu_clicked && (lcd_encoder == menu_item))
  474. {
  475. return menu_item_ret();
  476. }
  477. }
  478. menu_item++;
  479. return 0;
  480. #else //NEW_SD_MENU
  481. if (menu_item == menu_line)
  482. {
  483. if (lcd_draw_update)
  484. {
  485. if (lcd_encoder == menu_item)
  486. lcd_implementation_drawmenu_sdfile_selected(menu_row, str_fn, str_fnl);
  487. else
  488. lcd_implementation_drawmenu_sdfile(menu_row, str_fn, str_fnl);
  489. }
  490. if (menu_clicked && (lcd_encoder == menu_item))
  491. {
  492. lcd_consume_click();
  493. menu_action_sdfile(str_fn);
  494. return menu_item_ret();
  495. }
  496. }
  497. menu_item++;
  498. return 0;
  499. #endif //NEW_SD_MENU
  500. }
  501. // Print temperature (nozzle/bed) (9 chars total)
  502. void lcdui_print_temp(char type, int val_current, int val_target)
  503. {
  504. int chars = lcd_printf_P(_N("%c%3d/%d%c"), type, val_current, val_target, LCD_STR_DEGREE[0]);
  505. lcd_space(9 - chars);
  506. }
  507. // Print Z-coordinate (8 chars total)
  508. void lcdui_print_Z_coord(void)
  509. {
  510. if (custom_message_type == CustomMsg::MeshBedLeveling)
  511. lcd_puts_P(_N("Z --- "));
  512. else
  513. lcd_printf_P(_N("Z%6.2f%c"), current_position[Z_AXIS], axis_known_position[Z_AXIS]?' ':'?');
  514. }
  515. #ifdef PLANNER_DIAGNOSTICS
  516. // Print planner diagnostics (8 chars total)
  517. void lcdui_print_planner_diag(void)
  518. {
  519. lcd_set_cursor(LCD_WIDTH - 8-2, 1);
  520. lcd_print(LCD_STR_FEEDRATE[0]);
  521. lcd_print(itostr3(feedmultiply));
  522. lcd_puts_P(PSTR("% Q"));
  523. {
  524. uint8_t queue = planner_queue_min();
  525. if (queue < (BLOCK_BUFFER_SIZE >> 1))
  526. lcd_putc('!');
  527. else
  528. {
  529. lcd_putc((char)(queue / 10) + '0');
  530. queue %= 10;
  531. }
  532. lcd_putc((char)queue + '0');
  533. planner_queue_min_reset();
  534. }
  535. }
  536. #endif // PLANNER_DIAGNOSTICS
  537. // Print feedrate (8 chars total)
  538. void lcdui_print_feedrate(void)
  539. {
  540. int chars = lcd_printf_P(_N("%c%3d%%"), LCD_STR_FEEDRATE[0], feedmultiply);
  541. lcd_space(8 - chars);
  542. }
  543. // Print percent done in form "USB---%", " SD---%", " ---%" (7 chars total)
  544. void lcdui_print_percent_done(void)
  545. {
  546. const char* src = is_usb_printing?_N("USB"):(IS_SD_PRINTING?_N(" SD"):_N(" "));
  547. char per[4];
  548. bool num = IS_SD_PRINTING || (PRINTER_ACTIVE && (print_percent_done_normal != PRINT_PERCENT_DONE_INIT));
  549. if (!num || heating_status) // either not printing or heating
  550. {
  551. const int8_t sheetNR = eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet));
  552. const int8_t nextSheet = eeprom_next_initialized_sheet(sheetNR);
  553. if ((nextSheet >= 0) && (sheetNR != nextSheet))
  554. {
  555. char sheet[8];
  556. eeprom_read_block(sheet, EEPROM_Sheets_base->s[sheetNR].name, 7);
  557. sheet[7] = '\0';
  558. lcd_printf_P(PSTR("%-7s"),sheet);
  559. return; //do not also print the percentage
  560. }
  561. }
  562. sprintf_P(per, num?_N("%3hhd"):_N("---"), calc_percent_done());
  563. lcd_printf_P(_N("%3S%3s%%"), src, per);
  564. }
  565. // Print extruder status (5 chars total)
  566. void lcdui_print_extruder(void)
  567. {
  568. int chars = 0;
  569. if (mmu_extruder == tmp_extruder) {
  570. if (mmu_extruder == MMU_FILAMENT_UNKNOWN) chars = lcd_printf_P(_N(" F?"));
  571. else chars = lcd_printf_P(_N(" F%u"), mmu_extruder + 1);
  572. }
  573. else
  574. {
  575. if (mmu_extruder == MMU_FILAMENT_UNKNOWN) chars = lcd_printf_P(_N(" ?>%u"), tmp_extruder + 1);
  576. else chars = lcd_printf_P(_N(" %u>%u"), mmu_extruder + 1, tmp_extruder + 1);
  577. }
  578. lcd_space(5 - chars);
  579. }
  580. // Print farm number (5 chars total)
  581. void lcdui_print_farm(void)
  582. {
  583. int chars = lcd_printf_P(_N(" F0 "));
  584. // lcd_space(5 - chars);
  585. /*
  586. // Farm number display
  587. if (farm_mode)
  588. {
  589. lcd_set_cursor(6, 2);
  590. lcd_puts_P(PSTR(" F"));
  591. lcd_print(farm_no);
  592. lcd_puts_P(PSTR(" "));
  593. // Beat display
  594. lcd_set_cursor(LCD_WIDTH - 1, 0);
  595. if ( (_millis() - kicktime) < 60000 ) {
  596. lcd_puts_P(PSTR("L"));
  597. }else{
  598. lcd_puts_P(PSTR(" "));
  599. }
  600. }
  601. else {
  602. #ifdef SNMM
  603. lcd_puts_P(PSTR(" E"));
  604. lcd_print(get_ext_nr() + 1);
  605. #else
  606. lcd_set_cursor(LCD_WIDTH - 8 - 2, 2);
  607. lcd_puts_P(PSTR(" "));
  608. #endif
  609. }
  610. */
  611. }
  612. #ifdef CMD_DIAGNOSTICS
  613. // Print CMD queue diagnostic (8 chars total)
  614. void lcdui_print_cmd_diag(void)
  615. {
  616. lcd_set_cursor(LCD_WIDTH - 8 -1, 2);
  617. lcd_puts_P(PSTR(" C"));
  618. lcd_print(buflen); // number of commands in cmd buffer
  619. if (buflen < 9) lcd_puts_P(" ");
  620. }
  621. #endif //CMD_DIAGNOSTICS
  622. // Print time (8 chars total)
  623. void lcdui_print_time(void)
  624. {
  625. //if remaining print time estimation is available print it else print elapsed time
  626. uint16_t print_t = 0;
  627. if (print_time_remaining_normal != PRINT_TIME_REMAINING_INIT)
  628. print_t = print_time_remaining();
  629. else if(starttime != 0)
  630. print_t = _millis() / 60000 - starttime / 60000;
  631. int chars = 0;
  632. if ((PRINTER_ACTIVE) && ((print_time_remaining_normal != PRINT_TIME_REMAINING_INIT) || (starttime != 0)))
  633. {
  634. char suff = ' ';
  635. char suff_doubt = ' ';
  636. if (print_time_remaining_normal != PRINT_TIME_REMAINING_INIT)
  637. {
  638. suff = 'R';
  639. if (feedmultiply != 100)
  640. suff_doubt = '?';
  641. }
  642. if (print_t < 6000) //time<100h
  643. chars = lcd_printf_P(_N("%c%02u:%02u%c%c"), LCD_STR_CLOCK[0], print_t / 60, print_t % 60, suff, suff_doubt);
  644. else //time>=100h
  645. chars = lcd_printf_P(_N("%c%3uh %c%c"), LCD_STR_CLOCK[0], print_t / 60, suff, suff_doubt);
  646. }
  647. else
  648. chars = lcd_printf_P(_N("%c--:-- "), LCD_STR_CLOCK[0]);
  649. lcd_space(8 - chars);
  650. }
  651. //Print status line on status screen
  652. void lcdui_print_status_line(void)
  653. {
  654. if (IS_SD_PRINTING)
  655. {
  656. if (strcmp(longFilenameOLD, (card.longFilename[0] ? card.longFilename : card.filename)) != 0)
  657. {
  658. memset(longFilenameOLD, '\0', strlen(longFilenameOLD));
  659. sprintf_P(longFilenameOLD, PSTR("%s"), (card.longFilename[0] ? card.longFilename : card.filename));
  660. scrollstuff = 0;
  661. }
  662. }
  663. if (heating_status)
  664. { // If heating flag, show progress of heating
  665. heating_status_counter++;
  666. if (heating_status_counter > 13)
  667. {
  668. heating_status_counter = 0;
  669. }
  670. lcd_set_cursor(7, 3);
  671. lcd_puts_P(PSTR(" "));
  672. for (unsigned int dots = 0; dots < heating_status_counter; dots++)
  673. {
  674. lcd_set_cursor(7 + dots, 3);
  675. lcd_print('.');
  676. }
  677. switch (heating_status)
  678. {
  679. case 1:
  680. lcd_set_cursor(0, 3);
  681. lcd_puts_P(_T(MSG_HEATING));
  682. break;
  683. case 2:
  684. lcd_set_cursor(0, 3);
  685. lcd_puts_P(_T(MSG_HEATING_COMPLETE));
  686. heating_status = 0;
  687. heating_status_counter = 0;
  688. break;
  689. case 3:
  690. lcd_set_cursor(0, 3);
  691. lcd_puts_P(_T(MSG_BED_HEATING));
  692. break;
  693. case 4:
  694. lcd_set_cursor(0, 3);
  695. lcd_puts_P(_T(MSG_BED_DONE));
  696. heating_status = 0;
  697. heating_status_counter = 0;
  698. break;
  699. default:
  700. break;
  701. }
  702. }
  703. else if ((IS_SD_PRINTING) && (custom_message_type == CustomMsg::Status))
  704. { // If printing from SD, show what we are printing
  705. if(strlen(longFilenameOLD) > LCD_WIDTH)
  706. {
  707. int inters = 0;
  708. int gh = scrollstuff;
  709. while (((gh - scrollstuff) < LCD_WIDTH) && (inters == 0))
  710. {
  711. if (longFilenameOLD[gh] == '\0')
  712. {
  713. lcd_set_cursor(gh - scrollstuff, 3);
  714. lcd_print(longFilenameOLD[gh - 1]);
  715. scrollstuff = 0;
  716. gh = scrollstuff;
  717. inters = 1;
  718. }
  719. else
  720. {
  721. lcd_set_cursor(gh - scrollstuff, 3);
  722. lcd_print(longFilenameOLD[gh - 1]);
  723. gh++;
  724. }
  725. }
  726. scrollstuff++;
  727. }
  728. else
  729. {
  730. lcd_printf_P(PSTR("%-20s"), longFilenameOLD);
  731. }
  732. }
  733. else
  734. { // Otherwise check for other special events
  735. switch (custom_message_type)
  736. {
  737. case CustomMsg::Status: // Nothing special, print status message normally
  738. lcd_print(lcd_status_message);
  739. break;
  740. case CustomMsg::MeshBedLeveling: // If mesh bed leveling in progress, show the status
  741. if (custom_message_state > 10)
  742. {
  743. lcd_set_cursor(0, 3);
  744. lcd_puts_P(PSTR(" "));
  745. lcd_set_cursor(0, 3);
  746. lcd_puts_P(_T(MSG_CALIBRATE_Z_AUTO));
  747. lcd_puts_P(PSTR(" : "));
  748. lcd_print(custom_message_state-10);
  749. }
  750. else
  751. {
  752. if (custom_message_state == 3)
  753. {
  754. lcd_puts_P(_T(WELCOME_MSG));
  755. lcd_setstatuspgm(_T(WELCOME_MSG));
  756. custom_message_type = CustomMsg::Status;
  757. }
  758. if (custom_message_state > 3 && custom_message_state <= 10 )
  759. {
  760. lcd_set_cursor(0, 3);
  761. lcd_puts_P(PSTR(" "));
  762. lcd_set_cursor(0, 3);
  763. lcd_puts_P(_i("Calibration done"));////MSG_HOMEYZ_DONE
  764. custom_message_state--;
  765. }
  766. }
  767. break;
  768. case CustomMsg::FilamentLoading: // If loading filament, print status
  769. lcd_print(lcd_status_message);
  770. break;
  771. case CustomMsg::PidCal: // PID tuning in progress
  772. lcd_print(lcd_status_message);
  773. if (pid_cycle <= pid_number_of_cycles && custom_message_state > 0)
  774. {
  775. lcd_set_cursor(10, 3);
  776. lcd_print(itostr3(pid_cycle));
  777. lcd_print('/');
  778. lcd_print(itostr3left(pid_number_of_cycles));
  779. }
  780. break;
  781. case CustomMsg::TempCal: // PINDA temp calibration in progress
  782. {
  783. char statusLine[LCD_WIDTH + 1];
  784. sprintf_P(statusLine, PSTR("%-20S"), _T(MSG_TEMP_CALIBRATION));
  785. char progress[4];
  786. sprintf_P(progress, PSTR("%d/6"), custom_message_state);
  787. memcpy(statusLine + 12, progress, sizeof(progress) - 1);
  788. lcd_set_cursor(0, 3);
  789. lcd_print(statusLine);
  790. }
  791. break;
  792. case CustomMsg::TempCompPreheat: // temp compensation preheat
  793. lcd_set_cursor(0, 3);
  794. lcd_puts_P(_i("PINDA Heating"));////MSG_PINDA_PREHEAT c=20 r=1
  795. if (custom_message_state <= PINDA_HEAT_T)
  796. {
  797. lcd_puts_P(PSTR(": "));
  798. lcd_print(custom_message_state); //seconds
  799. lcd_print(' ');
  800. }
  801. break;
  802. }
  803. }
  804. // Fill the rest of line to have nice and clean output
  805. for(int fillspace = 0; fillspace < 20; fillspace++)
  806. if ((lcd_status_message[fillspace] <= 31 ))
  807. lcd_print(' ');
  808. }
  809. //! @brief Show Status Screen
  810. //!
  811. //! @code{.unparsed}
  812. //! |01234567890123456789|
  813. //! |N 000/000D Z000.0 |
  814. //! |B 000/000D F100% |
  815. //! |USB100% T0 t--:-- |
  816. //! |Status line.........|
  817. //! ----------------------
  818. //! N - nozzle temp symbol LCD_STR_THERMOMETER
  819. //! D - Degree sysmbol LCD_STR_DEGREE
  820. //! B - bed temp symbol LCD_STR_BEDTEMP
  821. //! F - feedrate symbol LCD_STR_FEEDRATE
  822. //! t - clock symbol LCD_STR_THERMOMETER
  823. //! @endcode
  824. void lcdui_print_status_screen(void)
  825. {
  826. lcd_set_cursor(0, 0); //line 0
  827. //Print the hotend temperature (9 chars total)
  828. lcdui_print_temp(LCD_STR_THERMOMETER[0], (int)(degHotend(0) + 0.5), (int)(degTargetHotend(0) + 0.5));
  829. lcd_space(3); //3 spaces
  830. //Print Z-coordinate (8 chars total)
  831. lcdui_print_Z_coord();
  832. lcd_set_cursor(0, 1); //line 1
  833. //Print the Bed temperature (9 chars total)
  834. lcdui_print_temp(LCD_STR_BEDTEMP[0], (int)(degBed() + 0.5), (int)(degTargetBed() + 0.5));
  835. lcd_space(3); //3 spaces
  836. #ifdef PLANNER_DIAGNOSTICS
  837. //Print planner diagnostics (8 chars)
  838. lcdui_print_planner_diag();
  839. #else // PLANNER_DIAGNOSTICS
  840. //Print Feedrate (8 chars)
  841. lcdui_print_feedrate();
  842. #endif // PLANNER_DIAGNOSTICS
  843. lcd_set_cursor(0, 2); //line 2
  844. //Print SD status (7 chars)
  845. lcdui_print_percent_done();
  846. if (mmu_enabled)
  847. //Print extruder status (5 chars)
  848. lcdui_print_extruder();
  849. else if (farm_mode)
  850. //Print farm number (5 chars)
  851. lcdui_print_farm();
  852. else
  853. lcd_space(5); //5 spaces
  854. #ifdef CMD_DIAGNOSTICS
  855. //Print cmd queue diagnostics (8chars)
  856. lcdui_print_cmd_diag();
  857. #else
  858. //Print time (8chars)
  859. lcdui_print_time();
  860. #endif //CMD_DIAGNOSTICS
  861. lcd_set_cursor(0, 3); //line 3
  862. #ifndef DEBUG_DISABLE_LCD_STATUS_LINE
  863. lcdui_print_status_line();
  864. #endif //DEBUG_DISABLE_LCD_STATUS_LINE
  865. }
  866. // Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent
  867. void lcd_status_screen() // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
  868. {
  869. if (firstrun == 1)
  870. {
  871. firstrun = 0;
  872. if(lcd_status_message_level == 0)
  873. {
  874. strncpy_P(lcd_status_message, _T(WELCOME_MSG), LCD_WIDTH);
  875. lcd_finishstatus();
  876. }
  877. if (eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME) == 255 && eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME + 1) == 255 && eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME + 2) == 255 && eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME + 3) == 255)
  878. {
  879. eeprom_update_dword((uint32_t *)EEPROM_TOTALTIME, 0);
  880. eeprom_update_dword((uint32_t *)EEPROM_FILAMENTUSED, 0);
  881. }
  882. }
  883. #ifdef ULTIPANEL_FEEDMULTIPLY
  884. // Dead zone at 100% feedrate
  885. if ((feedmultiply < 100 && (feedmultiply + int(lcd_encoder)) > 100) ||
  886. (feedmultiply > 100 && (feedmultiply + int(lcd_encoder)) < 100))
  887. {
  888. lcd_encoder = 0;
  889. feedmultiply = 100;
  890. }
  891. if (feedmultiply == 100 && int(lcd_encoder) > ENCODER_FEEDRATE_DEADZONE)
  892. {
  893. feedmultiply += int(lcd_encoder) - ENCODER_FEEDRATE_DEADZONE;
  894. lcd_encoder = 0;
  895. }
  896. else if (feedmultiply == 100 && int(lcd_encoder) < -ENCODER_FEEDRATE_DEADZONE)
  897. {
  898. feedmultiply += int(lcd_encoder) + ENCODER_FEEDRATE_DEADZONE;
  899. lcd_encoder = 0;
  900. }
  901. else if (feedmultiply != 100)
  902. {
  903. feedmultiply += int(lcd_encoder);
  904. lcd_encoder = 0;
  905. }
  906. #endif //ULTIPANEL_FEEDMULTIPLY
  907. if (feedmultiply < 10)
  908. feedmultiply = 10;
  909. else if (feedmultiply > 999)
  910. feedmultiply = 999;
  911. if (lcd_status_update_delay)
  912. lcd_status_update_delay--;
  913. else
  914. lcd_draw_update = 1;
  915. if (lcd_draw_update)
  916. {
  917. ReInitLCD++;
  918. if (ReInitLCD == 30)
  919. {
  920. lcd_refresh(); // to maybe revive the LCD if static electricity killed it.
  921. ReInitLCD = 0 ;
  922. }
  923. else
  924. {
  925. if ((ReInitLCD % 10) == 0)
  926. lcd_refresh_noclear(); //to maybe revive the LCD if static electricity killed it.
  927. }
  928. lcdui_print_status_screen();
  929. if (farm_mode)
  930. {
  931. farm_timer--;
  932. if (farm_timer < 1)
  933. {
  934. farm_timer = 10;
  935. prusa_statistics(0);
  936. }
  937. switch (farm_timer)
  938. {
  939. case 8:
  940. prusa_statistics(21);
  941. if(loading_flag)
  942. prusa_statistics(22);
  943. break;
  944. case 5:
  945. if (IS_SD_PRINTING)
  946. prusa_statistics(20);
  947. break;
  948. }
  949. } // end of farm_mode
  950. lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */
  951. if (lcd_commands_type != LcdCommands::Idle)
  952. lcd_commands();
  953. } // end of lcd_draw_update
  954. bool current_click = LCD_CLICKED;
  955. if (ignore_click)
  956. {
  957. if (wait_for_unclick)
  958. {
  959. if (!current_click)
  960. ignore_click = wait_for_unclick = false;
  961. else
  962. current_click = false;
  963. }
  964. else if (current_click)
  965. {
  966. lcd_quick_feedback();
  967. wait_for_unclick = true;
  968. current_click = false;
  969. }
  970. }
  971. if (current_click
  972. && ( menu_block_entering_on_serious_errors == SERIOUS_ERR_NONE ) // or a serious error blocks entering the menu
  973. )
  974. {
  975. menu_depth = 0; //redundant, as already done in lcd_return_to_status(), just to be sure
  976. menu_submenu(lcd_main_menu);
  977. lcd_refresh(); // to maybe revive the LCD if static electricity killed it.
  978. }
  979. }
  980. void lcd_commands()
  981. {
  982. if (lcd_commands_type == LcdCommands::LongPause)
  983. {
  984. if (!blocks_queued() && !homing_flag)
  985. {
  986. lcd_setstatuspgm(_i("Print paused"));////MSG_PRINT_PAUSED c=20 r=1
  987. lcd_commands_type = LcdCommands::Idle;
  988. lcd_commands_step = 0;
  989. long_pause();
  990. }
  991. }
  992. #ifdef SNMM
  993. if (lcd_commands_type == LcdCommands::Layer1Cal)
  994. {
  995. char cmd1[30];
  996. float width = 0.4;
  997. float length = 20 - width;
  998. float extr = count_e(0.2, width, length);
  999. float extr_short_segment = count_e(0.2, width, width);
  1000. if (lcd_commands_step>1) lcd_timeoutToStatus.start(); //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen
  1001. if (lcd_commands_step == 0)
  1002. {
  1003. lcd_commands_step = 10;
  1004. }
  1005. if (lcd_commands_step == 10 && !blocks_queued() && cmd_buffer_empty())
  1006. {
  1007. enquecommand_P(PSTR("M107"));
  1008. enquecommand_P(PSTR("M104 S" STRINGIFY(PLA_PREHEAT_HOTEND_TEMP)));
  1009. enquecommand_P(PSTR("M140 S" STRINGIFY(PLA_PREHEAT_HPB_TEMP)));
  1010. enquecommand_P(PSTR("M190 S" STRINGIFY(PLA_PREHEAT_HPB_TEMP)));
  1011. enquecommand_P(PSTR("M109 S" STRINGIFY(PLA_PREHEAT_HOTEND_TEMP)));
  1012. enquecommand_P(PSTR("T0"));
  1013. enquecommand_P(_T(MSG_M117_V2_CALIBRATION));
  1014. enquecommand_P(PSTR("G87")); //sets calibration status
  1015. enquecommand_P(PSTR("G28"));
  1016. enquecommand_P(PSTR("G21")); //set units to millimeters
  1017. enquecommand_P(PSTR("G90")); //use absolute coordinates
  1018. enquecommand_P(PSTR("M83")); //use relative distances for extrusion
  1019. enquecommand_P(PSTR("G92 E0"));
  1020. enquecommand_P(PSTR("M203 E100"));
  1021. enquecommand_P(PSTR("M92 E140"));
  1022. lcd_commands_step = 9;
  1023. }
  1024. if (lcd_commands_step == 9 && !blocks_queued() && cmd_buffer_empty())
  1025. {
  1026. lcd_timeoutToStatus.start();
  1027. enquecommand_P(PSTR("G1 Z0.250 F7200.000"));
  1028. enquecommand_P(PSTR("G1 X50.0 E80.0 F1000.0"));
  1029. enquecommand_P(PSTR("G1 X160.0 E20.0 F1000.0"));
  1030. enquecommand_P(PSTR("G1 Z0.200 F7200.000"));
  1031. enquecommand_P(PSTR("G1 X220.0 E13 F1000.0"));
  1032. enquecommand_P(PSTR("G1 X240.0 E0 F1000.0"));
  1033. enquecommand_P(PSTR("G92 E0.0"));
  1034. enquecommand_P(PSTR("G21"));
  1035. enquecommand_P(PSTR("G90"));
  1036. enquecommand_P(PSTR("M83"));
  1037. enquecommand_P(PSTR("G1 E-4 F2100.00000"));
  1038. enquecommand_P(PSTR("G1 Z0.150 F7200.000"));
  1039. enquecommand_P(PSTR("M204 S1000"));
  1040. enquecommand_P(PSTR("G1 F4000"));
  1041. lcd_clear();
  1042. menu_goto(lcd_babystep_z, 0, false, true);
  1043. lcd_commands_step = 8;
  1044. }
  1045. if (lcd_commands_step == 8 && !blocks_queued() && cmd_buffer_empty()) //draw meander
  1046. {
  1047. lcd_timeoutToStatus.start();
  1048. enquecommand_P(PSTR("G1 X50 Y155"));
  1049. enquecommand_P(PSTR("G1 X60 Y155 E4"));
  1050. enquecommand_P(PSTR("G1 F1080"));
  1051. enquecommand_P(PSTR("G1 X75 Y155 E2.5"));
  1052. enquecommand_P(PSTR("G1 X100 Y155 E2"));
  1053. enquecommand_P(PSTR("G1 X200 Y155 E2.62773"));
  1054. enquecommand_P(PSTR("G1 X200 Y135 E0.66174"));
  1055. enquecommand_P(PSTR("G1 X50 Y135 E3.62773"));
  1056. enquecommand_P(PSTR("G1 X50 Y115 E0.49386"));
  1057. enquecommand_P(PSTR("G1 X200 Y115 E3.62773"));
  1058. enquecommand_P(PSTR("G1 X200 Y95 E0.49386"));
  1059. enquecommand_P(PSTR("G1 X50 Y95 E3.62773"));
  1060. enquecommand_P(PSTR("G1 X50 Y75 E0.49386"));
  1061. enquecommand_P(PSTR("G1 X200 Y75 E3.62773"));
  1062. enquecommand_P(PSTR("G1 X200 Y55 E0.49386"));
  1063. enquecommand_P(PSTR("G1 X50 Y55 E3.62773"));
  1064. lcd_commands_step = 7;
  1065. }
  1066. if (lcd_commands_step == 7 && !blocks_queued() && cmd_buffer_empty())
  1067. {
  1068. lcd_timeoutToStatus.start();
  1069. strcpy(cmd1, "G1 X50 Y35 E");
  1070. strcat(cmd1, ftostr43(extr));
  1071. enquecommand(cmd1);
  1072. for (int i = 0; i < 4; i++) {
  1073. strcpy(cmd1, "G1 X70 Y");
  1074. strcat(cmd1, ftostr32(35 - i*width * 2));
  1075. strcat(cmd1, " E");
  1076. strcat(cmd1, ftostr43(extr));
  1077. enquecommand(cmd1);
  1078. strcpy(cmd1, "G1 Y");
  1079. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  1080. strcat(cmd1, " E");
  1081. strcat(cmd1, ftostr43(extr_short_segment));
  1082. enquecommand(cmd1);
  1083. strcpy(cmd1, "G1 X50 Y");
  1084. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  1085. strcat(cmd1, " E");
  1086. strcat(cmd1, ftostr43(extr));
  1087. enquecommand(cmd1);
  1088. strcpy(cmd1, "G1 Y");
  1089. strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
  1090. strcat(cmd1, " E");
  1091. strcat(cmd1, ftostr43(extr_short_segment));
  1092. enquecommand(cmd1);
  1093. }
  1094. lcd_commands_step = 6;
  1095. }
  1096. if (lcd_commands_step == 6 && !blocks_queued() && cmd_buffer_empty())
  1097. {
  1098. lcd_timeoutToStatus.start();
  1099. for (int i = 4; i < 8; i++) {
  1100. strcpy(cmd1, "G1 X70 Y");
  1101. strcat(cmd1, ftostr32(35 - i*width * 2));
  1102. strcat(cmd1, " E");
  1103. strcat(cmd1, ftostr43(extr));
  1104. enquecommand(cmd1);
  1105. strcpy(cmd1, "G1 Y");
  1106. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  1107. strcat(cmd1, " E");
  1108. strcat(cmd1, ftostr43(extr_short_segment));
  1109. enquecommand(cmd1);
  1110. strcpy(cmd1, "G1 X50 Y");
  1111. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  1112. strcat(cmd1, " E");
  1113. strcat(cmd1, ftostr43(extr));
  1114. enquecommand(cmd1);
  1115. strcpy(cmd1, "G1 Y");
  1116. strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
  1117. strcat(cmd1, " E");
  1118. strcat(cmd1, ftostr43(extr_short_segment));
  1119. enquecommand(cmd1);
  1120. }
  1121. lcd_commands_step = 5;
  1122. }
  1123. if (lcd_commands_step == 5 && !blocks_queued() && cmd_buffer_empty())
  1124. {
  1125. lcd_timeoutToStatus.start();
  1126. for (int i = 8; i < 12; i++) {
  1127. strcpy(cmd1, "G1 X70 Y");
  1128. strcat(cmd1, ftostr32(35 - i*width * 2));
  1129. strcat(cmd1, " E");
  1130. strcat(cmd1, ftostr43(extr));
  1131. enquecommand(cmd1);
  1132. strcpy(cmd1, "G1 Y");
  1133. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  1134. strcat(cmd1, " E");
  1135. strcat(cmd1, ftostr43(extr_short_segment));
  1136. enquecommand(cmd1);
  1137. strcpy(cmd1, "G1 X50 Y");
  1138. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  1139. strcat(cmd1, " E");
  1140. strcat(cmd1, ftostr43(extr));
  1141. enquecommand(cmd1);
  1142. strcpy(cmd1, "G1 Y");
  1143. strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
  1144. strcat(cmd1, " E");
  1145. strcat(cmd1, ftostr43(extr_short_segment));
  1146. enquecommand(cmd1);
  1147. }
  1148. lcd_commands_step = 4;
  1149. }
  1150. if (lcd_commands_step == 4 && !blocks_queued() && cmd_buffer_empty())
  1151. {
  1152. lcd_timeoutToStatus.start();
  1153. for (int i = 12; i < 16; i++) {
  1154. strcpy(cmd1, "G1 X70 Y");
  1155. strcat(cmd1, ftostr32(35 - i*width * 2));
  1156. strcat(cmd1, " E");
  1157. strcat(cmd1, ftostr43(extr));
  1158. enquecommand(cmd1);
  1159. strcpy(cmd1, "G1 Y");
  1160. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  1161. strcat(cmd1, " E");
  1162. strcat(cmd1, ftostr43(extr_short_segment));
  1163. enquecommand(cmd1);
  1164. strcpy(cmd1, "G1 X50 Y");
  1165. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  1166. strcat(cmd1, " E");
  1167. strcat(cmd1, ftostr43(extr));
  1168. enquecommand(cmd1);
  1169. strcpy(cmd1, "G1 Y");
  1170. strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
  1171. strcat(cmd1, " E");
  1172. strcat(cmd1, ftostr43(extr_short_segment));
  1173. enquecommand(cmd1);
  1174. }
  1175. lcd_commands_step = 3;
  1176. }
  1177. if (lcd_commands_step == 3 && !blocks_queued() && cmd_buffer_empty())
  1178. {
  1179. lcd_timeoutToStatus.start();
  1180. enquecommand_P(PSTR("G1 E-0.07500 F2100.00000"));
  1181. enquecommand_P(PSTR("G4 S0"));
  1182. enquecommand_P(PSTR("G1 E-4 F2100.00000"));
  1183. enquecommand_P(PSTR("G1 Z0.5 F7200.000"));
  1184. enquecommand_P(PSTR("G1 X245 Y1"));
  1185. enquecommand_P(PSTR("G1 X240 E4"));
  1186. enquecommand_P(PSTR("G1 F4000"));
  1187. enquecommand_P(PSTR("G1 X190 E2.7"));
  1188. enquecommand_P(PSTR("G1 F4600"));
  1189. enquecommand_P(PSTR("G1 X110 E2.8"));
  1190. enquecommand_P(PSTR("G1 F5200"));
  1191. enquecommand_P(PSTR("G1 X40 E3"));
  1192. enquecommand_P(PSTR("G1 E-15.0000 F5000"));
  1193. enquecommand_P(PSTR("G1 E-50.0000 F5400"));
  1194. enquecommand_P(PSTR("G1 E-15.0000 F3000"));
  1195. enquecommand_P(PSTR("G1 E-12.0000 F2000"));
  1196. enquecommand_P(PSTR("G1 F1600"));
  1197. lcd_commands_step = 2;
  1198. }
  1199. if (lcd_commands_step == 2 && !blocks_queued() && cmd_buffer_empty())
  1200. {
  1201. lcd_timeoutToStatus.start();
  1202. enquecommand_P(PSTR("G1 X0 Y1 E3.0000"));
  1203. enquecommand_P(PSTR("G1 X50 Y1 E-5.0000"));
  1204. enquecommand_P(PSTR("G1 F2000"));
  1205. enquecommand_P(PSTR("G1 X0 Y1 E5.0000"));
  1206. enquecommand_P(PSTR("G1 X50 Y1 E-5.0000"));
  1207. enquecommand_P(PSTR("G1 F2400"));
  1208. enquecommand_P(PSTR("G1 X0 Y1 E5.0000"));
  1209. enquecommand_P(PSTR("G1 X50 Y1 E-5.0000"));
  1210. enquecommand_P(PSTR("G1 F2400"));
  1211. enquecommand_P(PSTR("G1 X0 Y1 E5.0000"));
  1212. enquecommand_P(PSTR("G1 X50 Y1 E-3.0000"));
  1213. enquecommand_P(PSTR("G4 S0"));
  1214. enquecommand_P(PSTR("M107"));
  1215. enquecommand_P(PSTR("M104 S0"));
  1216. enquecommand_P(PSTR("M140 S0"));
  1217. enquecommand_P(PSTR("G1 X10 Y180 F4000"));
  1218. enquecommand_P(PSTR("G1 Z10 F1300.000"));
  1219. enquecommand_P(PSTR("M84"));
  1220. lcd_commands_step = 1;
  1221. }
  1222. if (lcd_commands_step == 1 && !blocks_queued() && cmd_buffer_empty())
  1223. {
  1224. lcd_setstatuspgm(_T(WELCOME_MSG));
  1225. lcd_commands_step = 0;
  1226. lcd_commands_type = 0;
  1227. if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) == 1) {
  1228. lcd_wizard(WizState::RepeatLay1Cal);
  1229. }
  1230. }
  1231. }
  1232. #else //if not SNMM
  1233. if (lcd_commands_type == LcdCommands::Layer1Cal)
  1234. {
  1235. char cmd1[30];
  1236. if(lcd_commands_step>1) lcd_timeoutToStatus.start(); //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen
  1237. if (!blocks_queued() && cmd_buffer_empty() && !saved_printing)
  1238. {
  1239. switch(lcd_commands_step)
  1240. {
  1241. case 0:
  1242. lcd_commands_step = 11;
  1243. break;
  1244. case 11:
  1245. lay1cal_wait_preheat();
  1246. lcd_commands_step = 10;
  1247. break;
  1248. case 10:
  1249. lay1cal_load_filament(cmd1, lay1cal_filament);
  1250. lcd_commands_step = 9;
  1251. break;
  1252. case 9:
  1253. lcd_clear();
  1254. menu_depth = 0;
  1255. menu_submenu(lcd_babystep_z);
  1256. lay1cal_intro_line();
  1257. lcd_commands_step = 8;
  1258. break;
  1259. case 8:
  1260. lay1cal_before_meander();
  1261. lcd_commands_step = 7;
  1262. break;
  1263. case 7:
  1264. lay1cal_meander(cmd1);
  1265. lcd_commands_step = 6;
  1266. break;
  1267. case 6:
  1268. for (uint8_t i = 0; i < 4; i++)
  1269. {
  1270. lay1cal_square(cmd1, i);
  1271. }
  1272. lcd_commands_step = 5;
  1273. break;
  1274. case 5:
  1275. for (uint8_t i = 4; i < 8; i++)
  1276. {
  1277. lay1cal_square(cmd1, i);
  1278. }
  1279. lcd_commands_step = 4;
  1280. break;
  1281. case 4:
  1282. for (uint8_t i = 8; i < 12; i++)
  1283. {
  1284. lay1cal_square(cmd1, i);
  1285. }
  1286. lcd_commands_step = 3;
  1287. break;
  1288. case 3:
  1289. for (uint8_t i = 12; i < 16; i++)
  1290. {
  1291. lay1cal_square(cmd1, i);
  1292. }
  1293. lcd_commands_step = 2;
  1294. break;
  1295. case 2:
  1296. enquecommand_P(PSTR("M107")); //turn off printer fan
  1297. enquecommand_P(PSTR("G1 E-0.07500 F2100.00000")); //retract
  1298. enquecommand_P(PSTR("M104 S0")); // turn off temperature
  1299. enquecommand_P(PSTR("M140 S0")); // turn off heatbed
  1300. enquecommand_P(PSTR("G1 Z10 F1300.000")); //lift Z
  1301. enquecommand_P(PSTR("G1 X10 Y180 F4000")); //Go to parking position
  1302. if (mmu_enabled) enquecommand_P(PSTR("M702 C")); //unload from nozzle
  1303. enquecommand_P(PSTR("M84"));// disable motors
  1304. forceMenuExpire = true; //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen
  1305. lcd_commands_step = 1;
  1306. break;
  1307. case 1:
  1308. lcd_setstatuspgm(_T(WELCOME_MSG));
  1309. lcd_commands_step = 0;
  1310. lcd_commands_type = LcdCommands::Idle;
  1311. if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) == 1)
  1312. {
  1313. lcd_wizard(WizState::RepeatLay1Cal);
  1314. }
  1315. break;
  1316. }
  1317. }
  1318. }
  1319. #endif // not SNMM
  1320. if (lcd_commands_type == LcdCommands::FarmModeConfirm) /// farm mode confirm
  1321. {
  1322. if (lcd_commands_step == 0) { lcd_commands_step = 6; }
  1323. if (lcd_commands_step == 1 && !blocks_queued())
  1324. {
  1325. lcd_confirm_print();
  1326. lcd_commands_step = 0;
  1327. lcd_commands_type = LcdCommands::Idle;
  1328. }
  1329. if (lcd_commands_step == 2 && !blocks_queued())
  1330. {
  1331. lcd_commands_step = 1;
  1332. }
  1333. if (lcd_commands_step == 3 && !blocks_queued())
  1334. {
  1335. lcd_commands_step = 2;
  1336. }
  1337. if (lcd_commands_step == 4 && !blocks_queued())
  1338. {
  1339. enquecommand_P(PSTR("G90"));
  1340. enquecommand_P(PSTR("G1 X" STRINGIFY(X_CANCEL_POS) " Y" STRINGIFY(Y_CANCEL_POS) " E0 F7000"));
  1341. lcd_commands_step = 3;
  1342. }
  1343. if (lcd_commands_step == 5 && !blocks_queued())
  1344. {
  1345. lcd_commands_step = 4;
  1346. }
  1347. if (lcd_commands_step == 6 && !blocks_queued())
  1348. {
  1349. enquecommand_P(PSTR("G91"));
  1350. enquecommand_P(PSTR("G1 Z15 F1500"));
  1351. st_synchronize();
  1352. #ifdef SNMM
  1353. lcd_commands_step = 7;
  1354. #else
  1355. lcd_commands_step = 5;
  1356. #endif
  1357. }
  1358. }
  1359. if (lcd_commands_type == LcdCommands::PidExtruder) {
  1360. char cmd1[30];
  1361. if (lcd_commands_step == 0) {
  1362. custom_message_type = CustomMsg::PidCal;
  1363. custom_message_state = 1;
  1364. lcd_draw_update = 3;
  1365. lcd_commands_step = 3;
  1366. }
  1367. if (lcd_commands_step == 3 && !blocks_queued()) { //PID calibration
  1368. strcpy(cmd1, "M303 E0 S");
  1369. strcat(cmd1, ftostr3(pid_temp));
  1370. // setting the correct target temperature (for visualization) is done in PID_autotune
  1371. enquecommand(cmd1);
  1372. lcd_setstatuspgm(_i("PID cal. "));////MSG_PID_RUNNING c=20 r=1
  1373. lcd_commands_step = 2;
  1374. }
  1375. if (lcd_commands_step == 2 && pid_tuning_finished) { //saving to eeprom
  1376. pid_tuning_finished = false;
  1377. custom_message_state = 0;
  1378. lcd_setstatuspgm(_i("PID cal. finished"));////MSG_PID_FINISHED c=20 r=1
  1379. setAllTargetHotends(0); // reset all hotends temperature including the number displayed on the main screen
  1380. if (_Kp != 0 || _Ki != 0 || _Kd != 0) {
  1381. strcpy(cmd1, "M301 P");
  1382. strcat(cmd1, ftostr32(_Kp));
  1383. strcat(cmd1, " I");
  1384. strcat(cmd1, ftostr32(_Ki));
  1385. strcat(cmd1, " D");
  1386. strcat(cmd1, ftostr32(_Kd));
  1387. enquecommand(cmd1);
  1388. enquecommand_P(PSTR("M500"));
  1389. }
  1390. else {
  1391. SERIAL_ECHOPGM("Invalid PID cal. results. Not stored to EEPROM.");
  1392. }
  1393. display_time = _millis();
  1394. lcd_commands_step = 1;
  1395. }
  1396. if ((lcd_commands_step == 1) && ((_millis()- display_time)>2000)) { //calibration finished message
  1397. lcd_setstatuspgm(_T(WELCOME_MSG));
  1398. custom_message_type = CustomMsg::Status;
  1399. pid_temp = DEFAULT_PID_TEMP;
  1400. lcd_commands_step = 0;
  1401. lcd_commands_type = LcdCommands::Idle;
  1402. }
  1403. }
  1404. }
  1405. void lcd_return_to_status()
  1406. {
  1407. lcd_refresh(); // to maybe revive the LCD if static electricity killed it.
  1408. menu_goto(lcd_status_screen, 0, false, true);
  1409. menu_depth = 0;
  1410. eFilamentAction = FilamentAction::None; // i.e. non-autoLoad
  1411. }
  1412. //! @brief Pause print, disable nozzle heater, move to park position
  1413. void lcd_pause_print()
  1414. {
  1415. stop_and_save_print_to_ram(0.0, -default_retraction);
  1416. lcd_return_to_status();
  1417. isPrintPaused = true;
  1418. if (LcdCommands::Idle == lcd_commands_type)
  1419. {
  1420. lcd_commands_type = LcdCommands::LongPause;
  1421. }
  1422. SERIAL_PROTOCOLLNRPGM(MSG_OCTOPRINT_PAUSED); //pause for octoprint
  1423. }
  1424. float move_menu_scale;
  1425. static void lcd_move_menu_axis();
  1426. /* Menu implementation */
  1427. static void lcd_cooldown()
  1428. {
  1429. setAllTargetHotends(0);
  1430. setTargetBed(0);
  1431. fanSpeed = 0;
  1432. eFilamentAction = FilamentAction::None;
  1433. lcd_return_to_status();
  1434. }
  1435. //! @brief append text label with a colon and format it into a fixed size output buffer
  1436. //! It would have been much easier if there was a ':' in the labels.
  1437. //! But since the texts like Bed, Nozzle and PINDA are used in other places
  1438. //! it is better to reuse these texts even though it requires some extra formatting code.
  1439. //! @param [in] ipgmLabel pointer to string in PROGMEM
  1440. //! @param [out] pointer to string in RAM which will receive the formatted text. Must be allocated to appropriate size
  1441. //! @param [in] dstSize allocated length of dst
  1442. static void pgmtext_with_colon(const char *ipgmLabel, char *dst, uint8_t dstSize){
  1443. uint8_t i = 0;
  1444. for(; i < dstSize - 2; ++i){ // 2 byte less than buffer, we'd be adding a ':' to the end
  1445. uint8_t b = pgm_read_byte(ipgmLabel + i);
  1446. if( ! b )
  1447. break;
  1448. dst[i] = b;
  1449. }
  1450. dst[i] = ':'; // append the colon
  1451. ++i;
  1452. for(; i < dstSize - 1; ++i) // fill the rest with spaces
  1453. dst[i] = ' ';
  1454. dst[dstSize-1] = '\0'; // terminate the string properly
  1455. }
  1456. //! @brief Show Extruder Info
  1457. //!
  1458. //! @code{.unparsed}
  1459. //! |01234567890123456789|
  1460. //! |Nozzle FAN: 0000 RPM| FAN c=10 r=1 SPEED c=3 r=1
  1461. //! |Print FAN: 0000 RPM| FAN c=10 r=1 SPEED c=3 r=1
  1462. //! |Fil. Xd:000 Yd:000 | Fil. c=4 r=1
  1463. //! |Int: 000 Shut: 000 | Int: c=4 r=1 Shut: c=4 r=1
  1464. //! ----------------------
  1465. //! @endcode
  1466. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1467. void lcd_menu_extruder_info() // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
  1468. {
  1469. // Display Nozzle fan RPM
  1470. lcd_timeoutToStatus.stop(); //infinite timeout
  1471. lcd_home();
  1472. static const size_t maxChars = 12;
  1473. char nozzle[maxChars], print[maxChars];
  1474. pgmtext_with_colon(_i("Nozzle FAN"), nozzle, maxChars); ////c=10 r=1
  1475. pgmtext_with_colon(_i("Print FAN"), print, maxChars); ////c=10 r=1
  1476. lcd_printf_P(_N("%s %4d RPM\n" "%s %4d RPM\n"), nozzle, 60*fan_speed[0], print, 60*fan_speed[1] );
  1477. #ifdef PAT9125
  1478. // Display X and Y difference from Filament sensor
  1479. // Display Light intensity from Filament sensor
  1480. // Frame_Avg register represents the average brightness of all pixels within a frame (324 pixels). This
  1481. // value ranges from 0(darkest) to 255(brightest).
  1482. // Display LASER shutter time from Filament sensor
  1483. // Shutter register is an index of LASER shutter time. It is automatically controlled by the chip's internal
  1484. // auto-exposure algorithm. When the chip is tracking on a good reflection surface, the Shutter is small.
  1485. // When the chip is tracking on a poor reflection surface, the Shutter is large. Value ranges from 0 to 46.
  1486. if (mmu_enabled == false)
  1487. {
  1488. if (!fsensor_enabled)
  1489. lcd_puts_P(_N("Filament sensor\n" "is disabled."));
  1490. else
  1491. {
  1492. if (!moves_planned() && !IS_SD_PRINTING && !is_usb_printing && (lcd_commands_type != LcdCommands::Layer1Cal))
  1493. pat9125_update();
  1494. lcd_printf_P(_N(
  1495. "Fil. Xd:%3d Yd:%3d\n" ////c=4 r=1
  1496. "Int: %3d " ////c=4 r=1
  1497. "Shut: %3d" ////c=4 r=1
  1498. ),
  1499. pat9125_x, pat9125_y,
  1500. pat9125_b, pat9125_s
  1501. );
  1502. }
  1503. }
  1504. #endif //PAT9125
  1505. menu_back_if_clicked();
  1506. }
  1507. //! @brief Show Fails Statistics MMU
  1508. //!
  1509. //! @code{.unparsed}
  1510. //! |01234567890123456789|
  1511. //! | Main | c=18 r=1
  1512. //! | Last print | c=18 r=1
  1513. //! | Total | c=18 r=1
  1514. //! | |
  1515. //! ----------------------
  1516. //! @endcode
  1517. static void lcd_menu_fails_stats_mmu()
  1518. {
  1519. MENU_BEGIN();
  1520. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  1521. MENU_ITEM_SUBMENU_P(_i("Last print"), lcd_menu_fails_stats_mmu_print); ////c=18 r=1
  1522. MENU_ITEM_SUBMENU_P(_i("Total"), lcd_menu_fails_stats_mmu_total); ////c=18 r=1
  1523. MENU_END();
  1524. }
  1525. //! @brief Show Last Print Failures Statistics MMU
  1526. //!
  1527. //! @code{.unparsed}
  1528. //! |01234567890123456789|
  1529. //! |Last print failures | c=20 r=1
  1530. //! | MMU fails: 000| c=14 r=1
  1531. //! | MMU load fails: 000| c=14 r=1
  1532. //! | |
  1533. //! ----------------------
  1534. //! @endcode
  1535. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1536. static void lcd_menu_fails_stats_mmu_print()
  1537. {
  1538. lcd_timeoutToStatus.stop(); //infinite timeout
  1539. uint8_t fails = eeprom_read_byte((uint8_t*)EEPROM_MMU_FAIL);
  1540. uint16_t load_fails = eeprom_read_byte((uint8_t*)EEPROM_MMU_LOAD_FAIL);
  1541. lcd_home();
  1542. lcd_printf_P(PSTR("%S\n" " %-16.16S%-3d\n" " %-16.16S%-3d"),
  1543. _i("Last print failures"), ////c=20 r=1
  1544. _i("MMU fails"), fails, ////c=14 r=1
  1545. _i("MMU load fails"), load_fails); ////c=14 r=1
  1546. menu_back_if_clicked_fb();
  1547. }
  1548. //! @brief Show Total Failures Statistics MMU
  1549. //!
  1550. //! @code{.unparsed}
  1551. //! |01234567890123456789|
  1552. //! |Total failures | c=20 r=1
  1553. //! | MMU fails: 000| c=14 r=1
  1554. //! | MMU load fails: 000| c=14 r=1
  1555. //! | MMU power fails:000| c=14 r=1
  1556. //! ----------------------
  1557. //! @endcode
  1558. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1559. static void lcd_menu_fails_stats_mmu_total()
  1560. {
  1561. mmu_command(MmuCmd::S3);
  1562. lcd_timeoutToStatus.stop(); //infinite timeout
  1563. uint8_t fails = eeprom_read_byte((uint8_t*)EEPROM_MMU_FAIL_TOT);
  1564. uint16_t load_fails = eeprom_read_byte((uint8_t*)EEPROM_MMU_LOAD_FAIL_TOT);
  1565. lcd_home();
  1566. lcd_printf_P(PSTR("%S\n" " %-16.16S%-3d\n" " %-16.16S%-3d\n" " %-16.16S%-3d"),
  1567. _i("Total failures"), ////c=20 r=1
  1568. _i("MMU fails"), fails, ////c=14 r=1
  1569. _i("MMU load fails"), load_fails, ////c=14 r=1
  1570. _i("MMU power fails"), mmu_power_failures); ////c=14 r=1
  1571. menu_back_if_clicked_fb();
  1572. }
  1573. #if defined(TMC2130) && defined(FILAMENT_SENSOR)
  1574. static const char failStatsFmt[] PROGMEM = "%S\n" " %-16.16S%-3d\n" " %-16.16S%-3d\n" " %-7.7SX %-3d Y %-3d";
  1575. //! @brief Show Total Failures Statistics MMU
  1576. //!
  1577. //! @code{.unparsed}
  1578. //! |01234567890123456789|
  1579. //! |Total failures | c=20 r=1
  1580. //! | Power failures: 000| c=14 r=1
  1581. //! | Filam. runouts: 000| c=14 r=1
  1582. //! | Crash X:000 Y:000| c=7 r=1
  1583. //! ----------------------
  1584. //! @endcode
  1585. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1586. static void lcd_menu_fails_stats_total()
  1587. {
  1588. lcd_timeoutToStatus.stop(); //infinite timeout
  1589. uint16_t power = eeprom_read_word((uint16_t*)EEPROM_POWER_COUNT_TOT);
  1590. uint16_t filam = eeprom_read_word((uint16_t*)EEPROM_FERROR_COUNT_TOT);
  1591. uint16_t crashX = eeprom_read_word((uint16_t*)EEPROM_CRASH_COUNT_X_TOT);
  1592. uint16_t crashY = eeprom_read_word((uint16_t*)EEPROM_CRASH_COUNT_Y_TOT);
  1593. lcd_home();
  1594. lcd_printf_P(failStatsFmt,
  1595. _i("Total failures"), ////c=20 r=1
  1596. _i("Power failures"), power, ////c=14 r=1
  1597. _i("Filam. runouts"), filam, ////c=14 r=1
  1598. _i("Crash"), crashX, crashY); ////c=7 r=1
  1599. menu_back_if_clicked_fb();
  1600. }
  1601. //! @brief Show Last Print Failures Statistics
  1602. //!
  1603. //! @code{.unparsed}
  1604. //! |01234567890123456789|
  1605. //! |Last print failures | c=20 r=1
  1606. //! | Power failures 000| c=14 r=1
  1607. //! | Filam. runouts 000| c=14 r=1
  1608. //! | Crash X:000 Y:000| c=7 r=1
  1609. //! ----------------------
  1610. //! @endcode
  1611. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1612. static void lcd_menu_fails_stats_print()
  1613. {
  1614. lcd_timeoutToStatus.stop(); //infinite timeout
  1615. uint8_t power = eeprom_read_byte((uint8_t*)EEPROM_POWER_COUNT);
  1616. uint8_t filam = eeprom_read_byte((uint8_t*)EEPROM_FERROR_COUNT);
  1617. uint8_t crashX = eeprom_read_byte((uint8_t*)EEPROM_CRASH_COUNT_X);
  1618. uint8_t crashY = eeprom_read_byte((uint8_t*)EEPROM_CRASH_COUNT_Y);
  1619. lcd_home();
  1620. #ifndef PAT9125
  1621. lcd_printf_P(failStatsFmt,
  1622. _i("Last print failures"), ////c=20 r=1
  1623. _i("Power failures"), power, ////c=14 r=1
  1624. _i("Filam. runouts"), filam, ////c=14 r=1
  1625. _i("Crash"), crashX, crashY); ////c=7 r=1
  1626. #else
  1627. // On the MK3 include detailed PAT9125 statistics about soft failures
  1628. lcd_printf_P(PSTR("%S\n"
  1629. " %-16.16S%-3d\n"
  1630. " %-7.7S H %-3d S %-3d\n"
  1631. " %-7.7S X %-3d Y %-3d"),
  1632. _i("Last print failures"), ////c=20 r=1
  1633. _i("Power failures"), power, ////c=14 r=1
  1634. _i("Runouts"), filam, fsensor_softfail, //c=7
  1635. _i("Crash"), crashX, crashY); ////c=7 r=1
  1636. #endif
  1637. menu_back_if_clicked_fb();
  1638. }
  1639. //! @brief Open fail statistics menu
  1640. //!
  1641. //! This version of function is used, when there is filament sensor,
  1642. //! power failure and crash detection.
  1643. //! There are Last print and Total menu items.
  1644. //!
  1645. //! @code{.unparsed}
  1646. //! |01234567890123456789|
  1647. //! | Main | c=18 r=1
  1648. //! | Last print | c=18 r=1
  1649. //! | Total | c=18 r=1
  1650. //! | |
  1651. //! ----------------------
  1652. //! @endcode
  1653. static void lcd_menu_fails_stats()
  1654. {
  1655. MENU_BEGIN();
  1656. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  1657. MENU_ITEM_SUBMENU_P(_i("Last print"), lcd_menu_fails_stats_print); ////c=18 r=1
  1658. MENU_ITEM_SUBMENU_P(_i("Total"), lcd_menu_fails_stats_total); ////c=18 r=1
  1659. MENU_END();
  1660. }
  1661. #elif defined(FILAMENT_SENSOR)
  1662. static const char failStatsFmt[] PROGMEM = "%S\n" " %-16.16S%-3d\n" "%S\n" " %-16.16S%-3d\n";
  1663. //!
  1664. //! @brief Print last print and total filament run outs
  1665. //!
  1666. //! This version of function is used, when there is filament sensor,
  1667. //! but no other sensors (e.g. power failure, crash detection).
  1668. //!
  1669. //! Example screen:
  1670. //! @code{.unparsed}
  1671. //! |01234567890123456789|
  1672. //! |Last print failures | c=20 r=1
  1673. //! | Filam. runouts 000| c=14 r=1
  1674. //! |Total failures | c=20 r=1
  1675. //! | Filam. runouts 000| c=14 r=1
  1676. //! ----------------------
  1677. //! @endcode
  1678. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1679. static void lcd_menu_fails_stats()
  1680. {
  1681. lcd_timeoutToStatus.stop(); //infinite timeout
  1682. uint8_t filamentLast = eeprom_read_byte((uint8_t*)EEPROM_FERROR_COUNT);
  1683. uint16_t filamentTotal = eeprom_read_word((uint16_t*)EEPROM_FERROR_COUNT_TOT);
  1684. lcd_home();
  1685. lcd_printf_P(failStatsFmt,
  1686. _i("Last print failures"), ////c=20 r=1
  1687. _i("Filam. runouts"), filamentLast, ////c=14 r=1
  1688. _i("Total failures"), ////c=20 r=1
  1689. _i("Filam. runouts"), filamentTotal); ////c=14 r=1
  1690. menu_back_if_clicked();
  1691. }
  1692. #else
  1693. static void lcd_menu_fails_stats()
  1694. {
  1695. lcd_timeoutToStatus.stop(); //infinite timeout
  1696. MENU_BEGIN();
  1697. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  1698. MENU_END();
  1699. }
  1700. #endif //TMC2130
  1701. #ifdef DEBUG_BUILD
  1702. #ifdef DEBUG_STACK_MONITOR
  1703. extern uint16_t SP_min;
  1704. extern char* __malloc_heap_start;
  1705. extern char* __malloc_heap_end;
  1706. #endif //DEBUG_STACK_MONITOR
  1707. //! @brief Show Debug Information
  1708. //!
  1709. //! @code{.unparsed}
  1710. //! |01234567890123456789|
  1711. //! |RAM statistics | c=20 r=1
  1712. //! | SP_min: 0000| c=14 r=1
  1713. //! | heap_start: 0000| c=14 r=1
  1714. //! | heap_end: 0000| c=14 r=1
  1715. //! ----------------------
  1716. //! @endcode
  1717. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1718. static void lcd_menu_debug()
  1719. {
  1720. #ifdef DEBUG_STACK_MONITOR
  1721. lcd_home();
  1722. lcd_printf_P(PSTR("RAM statistics\n" ////c=20 r=1
  1723. " SP_min: 0x%04x\n" ////c=14 r=1
  1724. " heap_start: 0x%04x\n" ////c=14 r=1
  1725. " heap_end: 0x%04x"), SP_min, __malloc_heap_start, __malloc_heap_end); ////c=14 r=1
  1726. #endif //DEBUG_STACK_MONITOR
  1727. menu_back_if_clicked_fb();
  1728. }
  1729. #endif /* DEBUG_BUILD */
  1730. //! @brief common line print for lcd_menu_temperatures
  1731. //! @param [in] ipgmLabel pointer to string in PROGMEM
  1732. //! @param [in] value to be printed behind the label
  1733. static void lcd_menu_temperatures_line(const char *ipgmLabel, int value){
  1734. static const size_t maxChars = 15;
  1735. char tmp[maxChars];
  1736. pgmtext_with_colon(ipgmLabel, tmp, maxChars);
  1737. lcd_printf_P(PSTR(" %s%3d\x01 \n"), tmp, value); // no need to add -14.14 to string alignment
  1738. }
  1739. //! @brief Show Temperatures
  1740. //!
  1741. //! @code{.unparsed}
  1742. //! |01234567890123456789|
  1743. //! | Nozzle: 000D| c=14 r=1
  1744. //! | Bed: 000D| c=14 r=1
  1745. //! | Ambient: 000D| c=14 r=1
  1746. //! | PINDA: 000D| c=14 r=1
  1747. //! ----------------------
  1748. //! D - Degree sysmbol LCD_STR_DEGREE
  1749. //! @endcode
  1750. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1751. static void lcd_menu_temperatures()
  1752. {
  1753. lcd_timeoutToStatus.stop(); //infinite timeout
  1754. lcd_home();
  1755. lcd_menu_temperatures_line( _T(MSG_NOZZLE), (int)current_temperature[0] ); ////c=14 r=1
  1756. lcd_menu_temperatures_line( _T(MSG_BED), (int)current_temperature_bed ); ////c=14 r=1
  1757. #ifdef AMBIENT_THERMISTOR
  1758. lcd_menu_temperatures_line( _i("Ambient"), (int)current_temperature_ambient ); ////c=14 r=1
  1759. #endif //AMBIENT_THERMISTOR
  1760. #ifdef PINDA_THERMISTOR
  1761. lcd_menu_temperatures_line( _i("PINDA"), (int)current_temperature_pinda ); ////c=14
  1762. #endif //PINDA_THERMISTOR
  1763. menu_back_if_clicked();
  1764. }
  1765. #if defined (VOLT_BED_PIN) || defined (VOLT_PWR_PIN) || defined(IR_SENSOR_ANALOG)
  1766. #define VOLT_DIV_R1 10000
  1767. #define VOLT_DIV_R2 2370
  1768. #define VOLT_DIV_FAC ((float)VOLT_DIV_R2 / (VOLT_DIV_R2 + VOLT_DIV_R1))
  1769. //! @brief Show Voltages
  1770. //!
  1771. //! @code{.unparsed}
  1772. //! |01234567890123456789|
  1773. //! | |
  1774. //! | PWR: 00.0V | c=12 r=1
  1775. //! | Bed: 00.0V | c=12 r=1
  1776. //! | IR : 00.0V | c=12 r=1 optional
  1777. //! ----------------------
  1778. //! @endcode
  1779. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1780. static void lcd_menu_voltages()
  1781. {
  1782. lcd_timeoutToStatus.stop(); //infinite timeout
  1783. float volt_pwr = VOLT_DIV_REF * ((float)current_voltage_raw_pwr / (1023 * OVERSAMPLENR)) / VOLT_DIV_FAC;
  1784. float volt_bed = VOLT_DIV_REF * ((float)current_voltage_raw_bed / (1023 * OVERSAMPLENR)) / VOLT_DIV_FAC;
  1785. lcd_home();
  1786. lcd_printf_P(PSTR(" PWR: %4.1fV\n" " BED: %4.1fV"), volt_pwr, volt_bed);
  1787. #ifdef IR_SENSOR_ANALOG
  1788. lcd_printf_P(PSTR("\n IR : %3.1fV"), Raw2Voltage(current_voltage_raw_IR));
  1789. #endif //IR_SENSOR_ANALOG
  1790. menu_back_if_clicked();
  1791. }
  1792. #endif //defined (VOLT_BED_PIN) || defined (VOLT_PWR_PIN) || defined(IR_SENSOR_ANALOG)
  1793. #ifdef TMC2130
  1794. //! @brief Show Belt Status
  1795. //!
  1796. //! @code{.unparsed}
  1797. //! |01234567890123456789|
  1798. //! | Belt status | c=18
  1799. //! | X: 000 |
  1800. //! | Y: 000 |
  1801. //! | |
  1802. //! ----------------------
  1803. //! @endcode
  1804. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1805. static void lcd_menu_belt_status()
  1806. {
  1807. lcd_home();
  1808. lcd_printf_P(PSTR("%S\n" " X %d\n" " Y %d"), _i("Belt status"), eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_X)), eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_Y)));
  1809. menu_back_if_clicked();
  1810. }
  1811. #endif //TMC2130
  1812. #ifdef RESUME_DEBUG
  1813. extern void stop_and_save_print_to_ram(float z_move, float e_move);
  1814. extern void restore_print_from_ram_and_continue(float e_move);
  1815. static void lcd_menu_test_save()
  1816. {
  1817. stop_and_save_print_to_ram(10, -0.8);
  1818. }
  1819. static void lcd_menu_test_restore()
  1820. {
  1821. restore_print_from_ram_and_continue(0.8);
  1822. }
  1823. #endif //RESUME_DEBUG
  1824. //! @brief Show Preheat Menu
  1825. static void lcd_preheat_menu()
  1826. {
  1827. eFilamentAction = FilamentAction::Preheat;
  1828. lcd_generic_preheat_menu();
  1829. }
  1830. //! @brief Show Support Menu
  1831. //!
  1832. //! @code{.unparsed}
  1833. //! |01234567890123456789|
  1834. //! | Main |
  1835. //! | Firmware: | c=18 r=1
  1836. //! | 3.7.2.-2363 | c=16 r=1
  1837. //! | prusa3d.com | MSG_PRUSA3D
  1838. //! | forum.prusa3d.com | MSG_PRUSA3D_FORUM
  1839. //! | howto.prusa3d.com | MSG_PRUSA3D_HOWTO
  1840. //! | -------------- | STR_SEPARATOR
  1841. //! | 1_75mm_MK3 | FILAMENT_SIZE
  1842. //! | howto.prusa3d.com | ELECTRONICS
  1843. //! | howto.prusa3d.com | NOZZLE_TYPE
  1844. //! | -------------- | STR_SEPARATOR
  1845. //! | Date: | c=17 r=1
  1846. //! | MMM DD YYYY | __DATE__
  1847. //! | -------------- | STR_SEPARATOR
  1848. //! @endcode
  1849. //!
  1850. //! If MMU is connected
  1851. //!
  1852. //! @code{.unparsed}
  1853. //! | MMU2 connected | c=18 r=1
  1854. //! | FW: 1.0.6-7064523 |
  1855. //! @endcode
  1856. //!
  1857. //! If MMU is not connected
  1858. //!
  1859. //! @code{.unparsed}
  1860. //! | MMU2 N/A | c=18 r=1
  1861. //! @endcode
  1862. //!
  1863. //! If Flash Air is connected
  1864. //!
  1865. //! @code{.unparsed}
  1866. //! | -------------- | STR_SEPARATOR
  1867. //! | FlashAir IP Addr: | c=18 r=1
  1868. //! | 192.168.1.100 |
  1869. //! @endcode
  1870. //!
  1871. //! @code{.unparsed}
  1872. //! | -------------- | STR_SEPARATOR
  1873. //! | XYZ cal. details | MSG_XYZ_DETAILS c=18
  1874. //! | Extruder info | MSG_INFO_EXTRUDER
  1875. //! | XYZ cal. details | MSG_INFO_SENSORS
  1876. //! @endcode
  1877. //!
  1878. //! If TMC2130 defined
  1879. //!
  1880. //! @code{.unparsed}
  1881. //! | Belt status | MSG_MENU_BELT_STATUS
  1882. //! @endcode
  1883. //!
  1884. //! @code{.unparsed}
  1885. //! | Temperatures | MSG_MENU_TEMPERATURES
  1886. //! @endcode
  1887. //!
  1888. //! If Voltage Bed and PWR Pin are defined
  1889. //!
  1890. //! @code{.unparsed}
  1891. //! | Voltages | MSG_MENU_VOLTAGES
  1892. //! @endcode
  1893. //!
  1894. //!
  1895. //! If DEBUG_BUILD is defined
  1896. //!
  1897. //! @code{.unparsed}
  1898. //! | Debug | c=18 r=1
  1899. //! @endcode
  1900. //! ----------------------
  1901. //! @endcode
  1902. static void lcd_support_menu()
  1903. {
  1904. typedef struct
  1905. { // 22bytes total
  1906. int8_t status; // 1byte
  1907. bool is_flash_air; // 1byte
  1908. uint8_t ip[4]; // 4bytes
  1909. char ip_str[3*4+3+1]; // 16bytes
  1910. } _menu_data_t;
  1911. static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
  1912. _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
  1913. if (_md->status == 0 || lcd_draw_update == 2)
  1914. {
  1915. // Menu was entered or SD card status has changed (plugged in or removed).
  1916. // Initialize its status.
  1917. _md->status = 1;
  1918. _md->is_flash_air = card.ToshibaFlashAir_isEnabled() && card.ToshibaFlashAir_GetIP(_md->ip);
  1919. if (_md->is_flash_air)
  1920. sprintf_P(_md->ip_str, PSTR("%d.%d.%d.%d"),
  1921. _md->ip[0], _md->ip[1],
  1922. _md->ip[2], _md->ip[3]);
  1923. } else if (_md->is_flash_air &&
  1924. _md->ip[0] == 0 && _md->ip[1] == 0 &&
  1925. _md->ip[2] == 0 && _md->ip[3] == 0 &&
  1926. ++ _md->status == 16)
  1927. {
  1928. // Waiting for the FlashAir card to get an IP address from a router. Force an update.
  1929. _md->status = 0;
  1930. }
  1931. MENU_BEGIN();
  1932. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  1933. MENU_ITEM_BACK_P(PSTR("Firmware:"));
  1934. MENU_ITEM_BACK_P(PSTR(" " FW_VERSION_FULL));
  1935. #if (FW_DEV_VERSION != FW_VERSION_GOLD) && (FW_DEV_VERSION != FW_VERSION_RC)
  1936. MENU_ITEM_BACK_P(PSTR(" repo " FW_REPOSITORY));
  1937. #endif
  1938. // Ideally this block would be optimized out by the compiler.
  1939. /* const uint8_t fw_string_len = strlen_P(FW_VERSION_STR_P());
  1940. if (fw_string_len < 6) {
  1941. MENU_ITEM_BACK_P(PSTR(MSG_FW_VERSION " - " FW_version));
  1942. } else {
  1943. MENU_ITEM_BACK_P(PSTR("FW - " FW_version));
  1944. }*/
  1945. MENU_ITEM_BACK_P(_i("prusa3d.com"));////MSG_PRUSA3D
  1946. MENU_ITEM_BACK_P(_i("forum.prusa3d.com"));////MSG_PRUSA3D_FORUM
  1947. MENU_ITEM_BACK_P(_i("howto.prusa3d.com"));////MSG_PRUSA3D_HOWTO
  1948. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1949. MENU_ITEM_BACK_P(PSTR(FILAMENT_SIZE));
  1950. MENU_ITEM_BACK_P(PSTR(ELECTRONICS));
  1951. MENU_ITEM_BACK_P(PSTR(NOZZLE_TYPE));
  1952. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1953. MENU_ITEM_BACK_P(_i("Date:"));////MSG_DATE c=17 r=1
  1954. MENU_ITEM_BACK_P(PSTR(__DATE__));
  1955. #ifdef IR_SENSOR_ANALOG
  1956. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1957. MENU_ITEM_BACK_P(PSTR("Fil. sensor v.:"));
  1958. MENU_ITEM_BACK_P(FsensorIRVersionText());
  1959. #endif // IR_SENSOR_ANALOG
  1960. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1961. if (mmu_enabled)
  1962. {
  1963. MENU_ITEM_BACK_P(_i("MMU2 connected")); ////c=18 r=1
  1964. MENU_ITEM_BACK_P(PSTR(" FW:")); ////c=17 r=1
  1965. if (((menu_item - 1) == menu_line) && lcd_draw_update)
  1966. {
  1967. lcd_set_cursor(6, menu_row);
  1968. if ((mmu_version > 0) && (mmu_buildnr > 0))
  1969. lcd_printf_P(PSTR("%d.%d.%d-%d"), mmu_version/100, mmu_version%100/10, mmu_version%10, mmu_buildnr);
  1970. else
  1971. lcd_puts_P(_i("unknown"));
  1972. }
  1973. }
  1974. else
  1975. MENU_ITEM_BACK_P(PSTR("MMU2 N/A"));
  1976. // Show the FlashAir IP address, if the card is available.
  1977. if (_md->is_flash_air) {
  1978. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1979. MENU_ITEM_BACK_P(PSTR("FlashAir IP Addr:")); //c=18 r=1
  1980. ///! MENU_ITEM(back_RAM, _md->ip_str, 0);
  1981. }
  1982. #ifndef MK1BP
  1983. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1984. MENU_ITEM_SUBMENU_P(_i("XYZ cal. details"), lcd_menu_xyz_y_min);////MSG_XYZ_DETAILS c=18
  1985. MENU_ITEM_SUBMENU_P(_i("Extruder info"), lcd_menu_extruder_info);////MSG_INFO_EXTRUDER c=18
  1986. MENU_ITEM_SUBMENU_P(_i("Sensor info"), lcd_menu_show_sensors_state);////MSG_INFO_SENSORS c=18 r=1
  1987. #ifdef TMC2130
  1988. MENU_ITEM_SUBMENU_P(_i("Belt status"), lcd_menu_belt_status);////MSG_MENU_BELT_STATUS c=18
  1989. #endif //TMC2130
  1990. MENU_ITEM_SUBMENU_P(_i("Temperatures"), lcd_menu_temperatures);////MSG_MENU_TEMPERATURES c=18 r=1
  1991. #if defined (VOLT_BED_PIN) || defined (VOLT_PWR_PIN)
  1992. MENU_ITEM_SUBMENU_P(_i("Voltages"), lcd_menu_voltages);////MSG_MENU_VOLTAGES c=18 r=1
  1993. #endif //defined VOLT_BED_PIN || defined VOLT_PWR_PIN
  1994. #ifdef DEBUG_BUILD
  1995. MENU_ITEM_SUBMENU_P(PSTR("Debug"), lcd_menu_debug);////c=18 r=1
  1996. #endif /* DEBUG_BUILD */
  1997. #endif //MK1BP
  1998. MENU_END();
  1999. }
  2000. void lcd_set_fan_check() {
  2001. fans_check_enabled = !fans_check_enabled;
  2002. eeprom_update_byte((unsigned char *)EEPROM_FAN_CHECK_ENABLED, fans_check_enabled);
  2003. #ifdef FANCHECK
  2004. if (fans_check_enabled == false) fan_check_error = EFCE_OK; //reset error if fanCheck is disabled during error. Allows resuming print.
  2005. #endif //FANCHECK
  2006. }
  2007. #ifdef MMU_HAS_CUTTER
  2008. void lcd_cutter_enabled()
  2009. {
  2010. if (EEPROM_MMU_CUTTER_ENABLED_enabled == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
  2011. {
  2012. #ifndef MMU_ALWAYS_CUT
  2013. eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, 0);
  2014. }
  2015. #else //MMU_ALWAYS_CUT
  2016. eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, EEPROM_MMU_CUTTER_ENABLED_always);
  2017. }
  2018. else if (EEPROM_MMU_CUTTER_ENABLED_always == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
  2019. {
  2020. eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, 0);
  2021. }
  2022. #endif //MMU_ALWAYS_CUT
  2023. else
  2024. {
  2025. eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, EEPROM_MMU_CUTTER_ENABLED_enabled);
  2026. }
  2027. }
  2028. #endif //MMU_HAS_CUTTER
  2029. void lcd_set_filament_autoload() {
  2030. fsensor_autoload_set(!fsensor_autoload_enabled);
  2031. }
  2032. #if defined(FILAMENT_SENSOR) && defined(PAT9125)
  2033. void lcd_set_filament_oq_meass()
  2034. {
  2035. fsensor_oq_meassure_set(!fsensor_oq_meassure_enabled);
  2036. }
  2037. #endif
  2038. FilamentAction eFilamentAction=FilamentAction::None; // must be initialized as 'non-autoLoad'
  2039. bool bFilamentFirstRun;
  2040. bool bFilamentPreheatState;
  2041. bool bFilamentAction=false;
  2042. static bool bFilamentWaitingFlag=false;
  2043. static void mFilamentPrompt()
  2044. {
  2045. uint8_t nLevel;
  2046. lcd_set_cursor(0,0);
  2047. lcdui_print_temp(LCD_STR_THERMOMETER[0],(int)degHotend(0),(int)degTargetHotend(0));
  2048. lcd_set_cursor(0,2);
  2049. lcd_puts_P(_i("Press the knob")); ////MSG_ c=20 r=1
  2050. lcd_set_cursor(0,3);
  2051. switch(eFilamentAction)
  2052. {
  2053. case FilamentAction::Load:
  2054. case FilamentAction::AutoLoad:
  2055. case FilamentAction::MmuLoad:
  2056. lcd_puts_P(_i("to load filament")); ////MSG_ c=20 r=1
  2057. break;
  2058. case FilamentAction::UnLoad:
  2059. case FilamentAction::MmuUnLoad:
  2060. lcd_puts_P(_i("to unload filament")); ////MSG_ c=20 r=1
  2061. break;
  2062. case FilamentAction::MmuEject:
  2063. case FilamentAction::MmuCut:
  2064. case FilamentAction::None:
  2065. case FilamentAction::Preheat:
  2066. case FilamentAction::Lay1Cal:
  2067. break;
  2068. }
  2069. if(lcd_clicked())
  2070. {
  2071. nLevel=2;
  2072. if(!bFilamentPreheatState)
  2073. {
  2074. nLevel++;
  2075. // setTargetHotend0(0.0); // uncoment if return to base-state is required
  2076. }
  2077. menu_back(nLevel);
  2078. switch(eFilamentAction)
  2079. {
  2080. case FilamentAction::AutoLoad:
  2081. eFilamentAction=FilamentAction::None; // i.e. non-autoLoad
  2082. // no break
  2083. case FilamentAction::Load:
  2084. loading_flag=true;
  2085. enquecommand_P(PSTR("M701")); // load filament
  2086. break;
  2087. case FilamentAction::UnLoad:
  2088. enquecommand_P(PSTR("M702")); // unload filament
  2089. break;
  2090. case FilamentAction::MmuLoad:
  2091. case FilamentAction::MmuUnLoad:
  2092. case FilamentAction::MmuEject:
  2093. case FilamentAction::MmuCut:
  2094. case FilamentAction::None:
  2095. case FilamentAction::Preheat:
  2096. case FilamentAction::Lay1Cal:
  2097. break;
  2098. }
  2099. }
  2100. }
  2101. void mFilamentItem(uint16_t nTemp, uint16_t nTempBed)
  2102. {
  2103. static int nTargetOld;
  2104. static int nTargetBedOld;
  2105. uint8_t nLevel;
  2106. nTargetOld = target_temperature[0];
  2107. nTargetBedOld = target_temperature_bed;
  2108. setTargetHotend0((float )nTemp);
  2109. setTargetBed((float) nTempBed);
  2110. {
  2111. const FilamentAction action = eFilamentAction;
  2112. if (action == FilamentAction::Preheat || action == FilamentAction::Lay1Cal)
  2113. {
  2114. lcd_return_to_status();
  2115. if (action == FilamentAction::Lay1Cal)
  2116. {
  2117. lcd_commands_type = LcdCommands::Layer1Cal;
  2118. }
  2119. else
  2120. {
  2121. raise_z_above(MIN_Z_FOR_PREHEAT);
  2122. if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE))
  2123. lcd_wizard(WizState::LoadFilHot);
  2124. }
  2125. return;
  2126. }
  2127. }
  2128. lcd_timeoutToStatus.stop();
  2129. if (current_temperature[0] > (target_temperature[0] * 0.95))
  2130. {
  2131. switch (eFilamentAction)
  2132. {
  2133. case FilamentAction::Load:
  2134. case FilamentAction::AutoLoad:
  2135. case FilamentAction::UnLoad:
  2136. if (bFilamentWaitingFlag) menu_submenu(mFilamentPrompt);
  2137. else
  2138. {
  2139. nLevel = bFilamentPreheatState ? 1 : 2;
  2140. menu_back(nLevel);
  2141. if ((eFilamentAction == FilamentAction::Load) || (eFilamentAction == FilamentAction::AutoLoad))
  2142. {
  2143. loading_flag = true;
  2144. enquecommand_P(PSTR("M701")); // load filament
  2145. if (eFilamentAction == FilamentAction::AutoLoad) eFilamentAction = FilamentAction::None; // i.e. non-autoLoad
  2146. }
  2147. if (eFilamentAction == FilamentAction::UnLoad)
  2148. enquecommand_P(PSTR("M702")); // unload filament
  2149. }
  2150. break;
  2151. case FilamentAction::MmuLoad:
  2152. nLevel = bFilamentPreheatState ? 1 : 2;
  2153. bFilamentAction = true;
  2154. menu_back(nLevel);
  2155. menu_submenu(mmu_load_to_nozzle_menu);
  2156. break;
  2157. case FilamentAction::MmuUnLoad:
  2158. nLevel = bFilamentPreheatState ? 1 : 2;
  2159. bFilamentAction = true;
  2160. menu_back(nLevel);
  2161. extr_unload();
  2162. break;
  2163. case FilamentAction::MmuEject:
  2164. nLevel = bFilamentPreheatState ? 1 : 2;
  2165. bFilamentAction = true;
  2166. menu_back(nLevel);
  2167. menu_submenu(mmu_fil_eject_menu);
  2168. break;
  2169. case FilamentAction::MmuCut:
  2170. #ifdef MMU_HAS_CUTTER
  2171. nLevel=bFilamentPreheatState?1:2;
  2172. bFilamentAction=true;
  2173. menu_back(nLevel);
  2174. menu_submenu(mmu_cut_filament_menu);
  2175. #endif //MMU_HAS_CUTTER
  2176. break;
  2177. case FilamentAction::None:
  2178. case FilamentAction::Preheat:
  2179. case FilamentAction::Lay1Cal:
  2180. break;
  2181. }
  2182. if (bFilamentWaitingFlag) Sound_MakeSound(e_SOUND_TYPE_StandardPrompt);
  2183. bFilamentWaitingFlag = false;
  2184. }
  2185. else
  2186. {
  2187. bFilamentWaitingFlag = true;
  2188. lcd_set_cursor(0, 0);
  2189. lcdui_print_temp(LCD_STR_THERMOMETER[0], (int) degHotend(0), (int) degTargetHotend(0));
  2190. lcd_set_cursor(0, 1);
  2191. switch (eFilamentAction)
  2192. {
  2193. case FilamentAction::Load:
  2194. case FilamentAction::AutoLoad:
  2195. case FilamentAction::MmuLoad:
  2196. lcd_puts_P(_i("Preheating to load")); ////MSG_ c=20
  2197. break;
  2198. case FilamentAction::UnLoad:
  2199. case FilamentAction::MmuUnLoad:
  2200. lcd_puts_P(_i("Preheating to unload")); ////MSG_ c=20
  2201. break;
  2202. case FilamentAction::MmuEject:
  2203. lcd_puts_P(_i("Preheating to eject")); ////MSG_ c=20
  2204. break;
  2205. case FilamentAction::MmuCut:
  2206. lcd_puts_P(_i("Preheating to cut")); ////MSG_ c=20
  2207. break;
  2208. case FilamentAction::None:
  2209. case FilamentAction::Preheat:
  2210. case FilamentAction::Lay1Cal:
  2211. break;
  2212. }
  2213. lcd_set_cursor(0, 3);
  2214. lcd_puts_P(_i(">Cancel")); ////MSG_ c=20 r=1
  2215. if (lcd_clicked())
  2216. {
  2217. bFilamentWaitingFlag = false;
  2218. if (!bFilamentPreheatState)
  2219. {
  2220. setTargetHotend0(0.0);
  2221. setTargetBed(0.0);
  2222. menu_back();
  2223. }
  2224. else
  2225. {
  2226. setTargetHotend0((float )nTargetOld);
  2227. setTargetBed((float) nTargetBedOld);
  2228. }
  2229. menu_back();
  2230. if (eFilamentAction == FilamentAction::AutoLoad) eFilamentAction = FilamentAction::None; // i.e. non-autoLoad
  2231. }
  2232. }
  2233. }
  2234. static void mFilamentItem_farm()
  2235. {
  2236. bFilamentPreheatState = false;
  2237. mFilamentItem(FARM_PREHEAT_HOTEND_TEMP, FARM_PREHEAT_HPB_TEMP);
  2238. }
  2239. static void mFilamentItem_farm_nozzle()
  2240. {
  2241. bFilamentPreheatState = false;
  2242. mFilamentItem(FARM_PREHEAT_HOTEND_TEMP, 0);
  2243. }
  2244. static void mFilamentItem_PLA()
  2245. {
  2246. bFilamentPreheatState = false;
  2247. mFilamentItem(PLA_PREHEAT_HOTEND_TEMP, PLA_PREHEAT_HPB_TEMP);
  2248. }
  2249. static void mFilamentItem_PET()
  2250. {
  2251. bFilamentPreheatState = false;
  2252. mFilamentItem(PET_PREHEAT_HOTEND_TEMP, PET_PREHEAT_HPB_TEMP);
  2253. }
  2254. static void mFilamentItem_ASA()
  2255. {
  2256. bFilamentPreheatState = false;
  2257. mFilamentItem(ASA_PREHEAT_HOTEND_TEMP, ASA_PREHEAT_HPB_TEMP);
  2258. }
  2259. static void mFilamentItem_PC()
  2260. {
  2261. bFilamentPreheatState = false;
  2262. mFilamentItem(PC_PREHEAT_HOTEND_TEMP, PC_PREHEAT_HPB_TEMP);
  2263. }
  2264. static void mFilamentItem_ABS()
  2265. {
  2266. bFilamentPreheatState = false;
  2267. mFilamentItem(ABS_PREHEAT_HOTEND_TEMP, ABS_PREHEAT_HPB_TEMP);
  2268. }
  2269. static void mFilamentItem_HIPS()
  2270. {
  2271. bFilamentPreheatState = false;
  2272. mFilamentItem(HIPS_PREHEAT_HOTEND_TEMP, HIPS_PREHEAT_HPB_TEMP);
  2273. }
  2274. static void mFilamentItem_PP()
  2275. {
  2276. bFilamentPreheatState = false;
  2277. mFilamentItem(PP_PREHEAT_HOTEND_TEMP, PP_PREHEAT_HPB_TEMP);
  2278. }
  2279. static void mFilamentItem_FLEX()
  2280. {
  2281. bFilamentPreheatState = false;
  2282. mFilamentItem(FLEX_PREHEAT_HOTEND_TEMP, FLEX_PREHEAT_HPB_TEMP);
  2283. }
  2284. void mFilamentBack()
  2285. {
  2286. menu_back();
  2287. if (eFilamentAction == FilamentAction::AutoLoad ||
  2288. eFilamentAction == FilamentAction::Preheat ||
  2289. eFilamentAction == FilamentAction::Lay1Cal)
  2290. {
  2291. eFilamentAction = FilamentAction::None; // i.e. non-autoLoad
  2292. }
  2293. }
  2294. void lcd_generic_preheat_menu()
  2295. {
  2296. MENU_BEGIN();
  2297. if (!eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE))
  2298. {
  2299. if (eFilamentAction == FilamentAction::Lay1Cal)
  2300. {
  2301. MENU_ITEM_FUNCTION_P(_T(MSG_BACK), mFilamentBack);
  2302. }
  2303. else
  2304. {
  2305. MENU_ITEM_FUNCTION_P(_T(MSG_MAIN), mFilamentBack);
  2306. }
  2307. }
  2308. if (farm_mode)
  2309. {
  2310. MENU_ITEM_FUNCTION_P(PSTR("farm - " STRINGIFY(FARM_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(FARM_PREHEAT_HPB_TEMP)), mFilamentItem_farm);
  2311. MENU_ITEM_FUNCTION_P(PSTR("nozzle - " STRINGIFY(FARM_PREHEAT_HOTEND_TEMP) "/0"), mFilamentItem_farm_nozzle);
  2312. }
  2313. else
  2314. {
  2315. MENU_ITEM_SUBMENU_P(PSTR("PLA - " STRINGIFY(PLA_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PLA_PREHEAT_HPB_TEMP)),mFilamentItem_PLA);
  2316. MENU_ITEM_SUBMENU_P(PSTR("PET - " STRINGIFY(PET_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PET_PREHEAT_HPB_TEMP)),mFilamentItem_PET);
  2317. MENU_ITEM_SUBMENU_P(PSTR("ASA - " STRINGIFY(ASA_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ASA_PREHEAT_HPB_TEMP)),mFilamentItem_ASA);
  2318. MENU_ITEM_SUBMENU_P(PSTR("PC - " STRINGIFY(PC_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PC_PREHEAT_HPB_TEMP)),mFilamentItem_PC);
  2319. MENU_ITEM_SUBMENU_P(PSTR("ABS - " STRINGIFY(ABS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ABS_PREHEAT_HPB_TEMP)),mFilamentItem_ABS);
  2320. MENU_ITEM_SUBMENU_P(PSTR("HIPS - " STRINGIFY(HIPS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(HIPS_PREHEAT_HPB_TEMP)),mFilamentItem_HIPS);
  2321. MENU_ITEM_SUBMENU_P(PSTR("PP - " STRINGIFY(PP_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PP_PREHEAT_HPB_TEMP)),mFilamentItem_PP);
  2322. MENU_ITEM_SUBMENU_P(PSTR("FLEX - " STRINGIFY(FLEX_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(FLEX_PREHEAT_HPB_TEMP)),mFilamentItem_FLEX);
  2323. }
  2324. if (!eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) && eFilamentAction == FilamentAction::Preheat) MENU_ITEM_FUNCTION_P(_T(MSG_COOLDOWN), lcd_cooldown);
  2325. MENU_END();
  2326. }
  2327. void mFilamentItemForce()
  2328. {
  2329. mFilamentItem(target_temperature[0],target_temperature_bed);
  2330. }
  2331. void lcd_unLoadFilament()
  2332. {
  2333. eFilamentAction=FilamentAction::UnLoad;
  2334. preheat_or_continue();
  2335. }
  2336. static void mmu_unload_filament()
  2337. {
  2338. eFilamentAction = FilamentAction::MmuUnLoad;
  2339. preheat_or_continue();
  2340. }
  2341. void lcd_wait_interact() {
  2342. lcd_clear();
  2343. lcd_set_cursor(0, 1);
  2344. #ifdef SNMM
  2345. lcd_puts_P(_i("Prepare new filament"));////MSG_PREPARE_FILAMENT c=20 r=1
  2346. #else
  2347. lcd_puts_P(_i("Insert filament"));////MSG_INSERT_FILAMENT c=20
  2348. #endif
  2349. if (!fsensor_autoload_enabled) {
  2350. lcd_set_cursor(0, 2);
  2351. lcd_puts_P(_i("and press the knob"));////MSG_PRESS c=20 r=2
  2352. }
  2353. }
  2354. void lcd_change_success() {
  2355. lcd_clear();
  2356. lcd_set_cursor(0, 2);
  2357. lcd_puts_P(_i("Change success!"));////MSG_CHANGE_SUCCESS
  2358. }
  2359. static void lcd_loading_progress_bar(uint16_t loading_time_ms) {
  2360. for (uint_least8_t i = 0; i < 20; i++) {
  2361. lcd_set_cursor(i, 3);
  2362. lcd_print(".");
  2363. //loading_time_ms/20 delay
  2364. for (uint_least8_t j = 0; j < 5; j++) {
  2365. delay_keep_alive(loading_time_ms / 100);
  2366. }
  2367. }
  2368. }
  2369. void lcd_loading_color() {
  2370. //we are extruding 25mm with feedrate 200mm/min -> 7.5 seconds for whole action, 0.375 s for one character
  2371. lcd_clear();
  2372. lcd_set_cursor(0, 0);
  2373. lcd_puts_P(_i("Loading color"));////MSG_LOADING_COLOR
  2374. lcd_set_cursor(0, 2);
  2375. lcd_puts_P(_T(MSG_PLEASE_WAIT));
  2376. lcd_loading_progress_bar((FILAMENTCHANGE_FINALFEED * 1000ul) / FILAMENTCHANGE_EFEED_FINAL); //show progress bar during filament loading slow sequence
  2377. }
  2378. void lcd_loading_filament() {
  2379. lcd_clear();
  2380. lcd_set_cursor(0, 0);
  2381. lcd_puts_P(_T(MSG_LOADING_FILAMENT));
  2382. lcd_set_cursor(0, 2);
  2383. lcd_puts_P(_T(MSG_PLEASE_WAIT));
  2384. #ifdef SNMM
  2385. for (int i = 0; i < 20; i++) {
  2386. lcd_set_cursor(i, 3);
  2387. lcd_print(".");
  2388. for (int j = 0; j < 10 ; j++) {
  2389. manage_heater();
  2390. manage_inactivity(true);
  2391. _delay(153);
  2392. }
  2393. }
  2394. #else //SNMM
  2395. uint16_t slow_seq_time = (FILAMENTCHANGE_FINALFEED * 1000ul) / FILAMENTCHANGE_EFEED_FINAL;
  2396. uint16_t fast_seq_time = (FILAMENTCHANGE_FIRSTFEED * 1000ul) / FILAMENTCHANGE_EFEED_FIRST;
  2397. lcd_loading_progress_bar(slow_seq_time + fast_seq_time); //show progress bar for total time of filament loading fast + slow sequence
  2398. #endif //SNMM
  2399. }
  2400. void lcd_alright() {
  2401. int enc_dif = 0;
  2402. int cursor_pos = 1;
  2403. lcd_clear();
  2404. lcd_set_cursor(0, 0);
  2405. lcd_puts_P(_i("Changed correctly?"));////MSG_CORRECTLY c=20
  2406. lcd_set_cursor(1, 1);
  2407. lcd_puts_P(_T(MSG_YES));
  2408. lcd_set_cursor(1, 2);
  2409. lcd_puts_P(_i("Filament not loaded"));////MSG_NOT_LOADED c=19
  2410. lcd_set_cursor(1, 3);
  2411. lcd_puts_P(_i("Color not correct"));////MSG_NOT_COLOR
  2412. lcd_set_cursor(0, 1);
  2413. lcd_print(">");
  2414. enc_dif = lcd_encoder_diff;
  2415. lcd_consume_click();
  2416. while (lcd_change_fil_state == 0) {
  2417. manage_heater();
  2418. manage_inactivity(true);
  2419. if ( abs((enc_dif - lcd_encoder_diff)) > 4 ) {
  2420. if ( (abs(enc_dif - lcd_encoder_diff)) > 1 ) {
  2421. if (enc_dif > lcd_encoder_diff ) {
  2422. cursor_pos --;
  2423. }
  2424. if (enc_dif < lcd_encoder_diff ) {
  2425. cursor_pos ++;
  2426. }
  2427. if (cursor_pos > 3) {
  2428. cursor_pos = 3;
  2429. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  2430. }
  2431. if (cursor_pos < 1) {
  2432. cursor_pos = 1;
  2433. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  2434. }
  2435. lcd_set_cursor(0, 1);
  2436. lcd_print(" ");
  2437. lcd_set_cursor(0, 2);
  2438. lcd_print(" ");
  2439. lcd_set_cursor(0, 3);
  2440. lcd_print(" ");
  2441. lcd_set_cursor(0, cursor_pos);
  2442. lcd_print(">");
  2443. enc_dif = lcd_encoder_diff;
  2444. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  2445. _delay(100);
  2446. }
  2447. }
  2448. if (lcd_clicked()) {
  2449. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  2450. lcd_change_fil_state = cursor_pos;
  2451. _delay(500);
  2452. }
  2453. };
  2454. lcd_clear();
  2455. lcd_return_to_status();
  2456. }
  2457. void show_preheat_nozzle_warning()
  2458. {
  2459. lcd_clear();
  2460. lcd_set_cursor(0, 0);
  2461. lcd_puts_P(_T(MSG_ERROR));
  2462. lcd_set_cursor(0, 2);
  2463. lcd_puts_P(_T(MSG_PREHEAT_NOZZLE));
  2464. _delay(2000);
  2465. lcd_clear();
  2466. }
  2467. void lcd_load_filament_color_check()
  2468. {
  2469. bool clean = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_CLEAN), false, true);
  2470. while (!clean) {
  2471. lcd_update_enable(true);
  2472. lcd_update(2);
  2473. load_filament_final_feed();
  2474. st_synchronize();
  2475. clean = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_CLEAN), false, true);
  2476. }
  2477. }
  2478. #ifdef FILAMENT_SENSOR
  2479. static void lcd_menu_AutoLoadFilament()
  2480. {
  2481. uint8_t nlines;
  2482. lcd_display_message_fullscreen_nonBlocking_P(_i("Autoloading filament is active, just press the knob and insert filament..."),nlines);////MSG_AUTOLOADING_ENABLED c=20 r=4
  2483. menu_back_if_clicked();
  2484. }
  2485. #endif //FILAMENT_SENSOR
  2486. static void preheat_or_continue()
  2487. {
  2488. bFilamentFirstRun = false;
  2489. if (target_temperature[0] >= EXTRUDE_MINTEMP)
  2490. {
  2491. bFilamentPreheatState = true;
  2492. mFilamentItem(target_temperature[0], target_temperature_bed);
  2493. }
  2494. else lcd_generic_preheat_menu();
  2495. }
  2496. static void lcd_LoadFilament()
  2497. {
  2498. eFilamentAction = FilamentAction::Load;
  2499. preheat_or_continue();
  2500. }
  2501. //! @brief Show filament used a print time
  2502. //!
  2503. //! If printing current print statistics are shown
  2504. //!
  2505. //! @code{.unparsed}
  2506. //! |01234567890123456789|
  2507. //! |Filament used: | c=19
  2508. //! | 0000.00m |
  2509. //! |Print time: | c=19 r=1
  2510. //! | 00h 00m 00s |
  2511. //! ----------------------
  2512. //! @endcode
  2513. //!
  2514. //! If not printing, total statistics are shown
  2515. //!
  2516. //! @code{.unparsed}
  2517. //! |01234567890123456789|
  2518. //! |Total filament: | c=19 r=1
  2519. //! | 0000.00m |
  2520. //! |Total print time: | c=19 r=1
  2521. //! | 00d 00h 00m |
  2522. //! ----------------------
  2523. //! @endcode
  2524. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. Translations missing for "d"days, "h"ours, "m"inutes", "s"seconds".
  2525. void lcd_menu_statistics()
  2526. {
  2527. lcd_timeoutToStatus.stop(); //infinite timeout
  2528. if (IS_SD_PRINTING)
  2529. {
  2530. const float _met = ((float)total_filament_used) / (100000.f);
  2531. const uint32_t _t = (_millis() - starttime) / 1000ul;
  2532. const uint32_t _h = _t / 3600;
  2533. const uint8_t _m = (_t - (_h * 3600ul)) / 60ul;
  2534. const uint8_t _s = _t - ((_h * 3600ul) + (_m * 60ul));
  2535. lcd_home();
  2536. lcd_printf_P(_N(
  2537. "%S:\n"
  2538. "%18.2fm \n"
  2539. "%S:\n"
  2540. "%10ldh %02hhdm %02hhds"
  2541. ),
  2542. _i("Filament used"), _met, ////c=19
  2543. _i("Print time"), _h, _m, _s); ////c=19 r=1
  2544. menu_back_if_clicked_fb();
  2545. }
  2546. else
  2547. {
  2548. unsigned long _filament = eeprom_read_dword((uint32_t *)EEPROM_FILAMENTUSED);
  2549. unsigned long _time = eeprom_read_dword((uint32_t *)EEPROM_TOTALTIME); //in minutes
  2550. uint8_t _hours, _minutes;
  2551. uint32_t _days;
  2552. float _filament_m = (float)_filament/100;
  2553. _days = _time / 1440;
  2554. _hours = (_time - (_days * 1440)) / 60;
  2555. _minutes = _time - ((_days * 1440) + (_hours * 60));
  2556. lcd_home();
  2557. lcd_printf_P(_N(
  2558. "%S:\n"
  2559. "%18.2fm \n"
  2560. "%S:\n"
  2561. "%10ldd %02hhdh %02hhdm"
  2562. ),
  2563. _i("Total filament"), _filament_m, ////c=19 r=1
  2564. _i("Total print time"), _days, _hours, _minutes); ////c=19 r=1
  2565. menu_back_if_clicked_fb();
  2566. }
  2567. }
  2568. static void _lcd_move(const char *name, int axis, int min, int max)
  2569. {
  2570. typedef struct
  2571. { // 2bytes total
  2572. bool initialized; // 1byte
  2573. bool endstopsEnabledPrevious; // 1byte
  2574. } _menu_data_t;
  2575. static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
  2576. _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
  2577. if (!_md->initialized)
  2578. {
  2579. _md->endstopsEnabledPrevious = enable_endstops(false);
  2580. _md->initialized = true;
  2581. }
  2582. if (lcd_encoder != 0)
  2583. {
  2584. refresh_cmd_timeout();
  2585. if (! planner_queue_full())
  2586. {
  2587. current_position[axis] += float((int)lcd_encoder) * move_menu_scale;
  2588. if (min_software_endstops && current_position[axis] < min) current_position[axis] = min;
  2589. if (max_software_endstops && current_position[axis] > max) current_position[axis] = max;
  2590. lcd_encoder = 0;
  2591. world2machine_clamp(current_position[X_AXIS], current_position[Y_AXIS]);
  2592. plan_buffer_line_curposXYZE(manual_feedrate[axis] / 60);
  2593. lcd_draw_update = 1;
  2594. }
  2595. }
  2596. if (lcd_draw_update)
  2597. {
  2598. lcd_set_cursor(0, 1);
  2599. menu_draw_float31(name, current_position[axis]);
  2600. }
  2601. if (menu_leaving || LCD_CLICKED) (void)enable_endstops(_md->endstopsEnabledPrevious);
  2602. if (LCD_CLICKED) menu_back();
  2603. }
  2604. static void lcd_move_e()
  2605. {
  2606. if (degHotend0() > EXTRUDE_MINTEMP)
  2607. {
  2608. if (lcd_encoder != 0)
  2609. {
  2610. refresh_cmd_timeout();
  2611. if (! planner_queue_full())
  2612. {
  2613. current_position[E_AXIS] += float((int)lcd_encoder) * move_menu_scale;
  2614. lcd_encoder = 0;
  2615. plan_buffer_line_curposXYZE(manual_feedrate[E_AXIS] / 60);
  2616. lcd_draw_update = 1;
  2617. }
  2618. }
  2619. if (lcd_draw_update)
  2620. {
  2621. lcd_set_cursor(0, 1);
  2622. // Note: the colon behind the text is necessary to greatly shorten
  2623. // the implementation of menu_draw_float31
  2624. menu_draw_float31(PSTR("Extruder:"), current_position[E_AXIS]);
  2625. }
  2626. if (LCD_CLICKED) menu_back();
  2627. }
  2628. else
  2629. {
  2630. show_preheat_nozzle_warning();
  2631. lcd_return_to_status();
  2632. }
  2633. }
  2634. //! @brief Show measured Y distance of front calibration points from Y_MIN_POS
  2635. //! If those points are detected too close to edge of reachable area, their confidence is lowered.
  2636. //! This functionality is applied more often for MK2 printers.
  2637. //! @code{.unparsed}
  2638. //! |01234567890123456789|
  2639. //! |Y distance from min | c=19 r=1
  2640. //! | -------------- | STR_SEPARATOR
  2641. //! |Left: 00.00mm | c=11 r=1
  2642. //! |Right: 00.00mm | c=11 r=1
  2643. //! ----------------------
  2644. //! @endcode
  2645. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  2646. static void lcd_menu_xyz_y_min()
  2647. {
  2648. float distanceMin[2];
  2649. count_xyz_details(distanceMin);
  2650. lcd_home();
  2651. lcd_printf_P(_N(
  2652. "%S:\n"
  2653. "%S\n"
  2654. "%S:\n"
  2655. "%S:"
  2656. ),
  2657. _i("Y distance from min"), ////c=19 r=1
  2658. separator,
  2659. _i("Left"), ////c=11 r=1
  2660. _i("Right") ////c=11 r=1
  2661. );
  2662. for (uint8_t i = 0; i < 2; i++)
  2663. {
  2664. lcd_set_cursor(11,2+i);
  2665. if (distanceMin[i] >= 200) lcd_puts_P(_T(MSG_NA)); ////c=3 r=1
  2666. else lcd_printf_P(_N("%6.2fmm"), distanceMin[i]);
  2667. }
  2668. if (lcd_clicked())
  2669. menu_goto(lcd_menu_xyz_skew, 0, true, true);
  2670. }
  2671. //@brief Show measured axis skewness
  2672. float _deg(float rad)
  2673. {
  2674. return rad * 180 / M_PI;
  2675. }
  2676. //! @brief Show Measured XYZ Skew
  2677. //!
  2678. //! @code{.unparsed}
  2679. //! |01234567890123456789|
  2680. //! |Measured skew: 0.00D| c=13 r=1
  2681. //! | -------------- | STR_SEPARATOR
  2682. //! |Slight skew: 0.12D| c=13 r=1 c=4 r=1
  2683. //! |Severe skew: 0.25D| c=13 r=1 c=4 r=1
  2684. //! ----------------------
  2685. //! D - Degree sysmbol LCD_STR_DEGREE
  2686. //! @endcode
  2687. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  2688. static void lcd_menu_xyz_skew()
  2689. {
  2690. float angleDiff = eeprom_read_float((float*)(EEPROM_XYZ_CAL_SKEW));
  2691. lcd_home();
  2692. lcd_printf_P(_N(
  2693. "%S:\n"
  2694. "%S\n"
  2695. "%-15.15S%3.2f\x01\n"
  2696. "%-15.15S%3.2f\x01"
  2697. ),
  2698. _i("Measured skew"), ////c=13 r=1
  2699. separator,
  2700. _i("Slight skew:"), _deg(bed_skew_angle_mild), ////c=13 r=1 c=4 r=1
  2701. _i("Severe skew:"), _deg(bed_skew_angle_extreme) ////c=13 r=1 c=4 r=1
  2702. );
  2703. if (angleDiff < 100){
  2704. lcd_set_cursor(15,0);
  2705. lcd_printf_P(_N("%3.2f\x01"), _deg(angleDiff));
  2706. }
  2707. else{
  2708. lcd_set_cursor(15,0);
  2709. lcd_puts_P(_T(MSG_NA));
  2710. }
  2711. if (lcd_clicked())
  2712. menu_goto(lcd_menu_xyz_offset, 0, true, true);
  2713. }
  2714. //! @brief Show measured bed offset from expected position
  2715. //!
  2716. //! @code{.unparsed}
  2717. //! |01234567890123456789|
  2718. //! |[0;0] point offset | c=20 r=1
  2719. //! | -------------- | STR_SEPARATOR
  2720. //! |X: 000.00mm| c=10 r=1
  2721. //! |Y: 000.00mm| c=10 r=1
  2722. //! ----------------------
  2723. //! @endcode
  2724. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  2725. static void lcd_menu_xyz_offset()
  2726. {
  2727. lcd_set_cursor(0,0);
  2728. lcd_puts_P(_i("[0;0] point offset"));////MSG_MEASURED_OFFSET
  2729. lcd_puts_at_P(0, 1, separator);
  2730. lcd_puts_at_P(0, 2, PSTR("X")); ////c=10 r=1
  2731. lcd_puts_at_P(0, 3, PSTR("Y")); ////c=10 r=1
  2732. float vec_x[2];
  2733. float vec_y[2];
  2734. float cntr[2];
  2735. world2machine_read_valid(vec_x, vec_y, cntr);
  2736. for (uint_least8_t i = 0; i < 2; i++)
  2737. {
  2738. lcd_set_cursor((cntr[i] < 0) ? 10 : 11, i+2);
  2739. lcd_print(cntr[i]);
  2740. lcd_puts_at_P(16, i + 2, PSTR("mm"));
  2741. }
  2742. menu_back_if_clicked();
  2743. }
  2744. // Save a single axis babystep value.
  2745. void EEPROM_save_B(int pos, int* value)
  2746. {
  2747. eeprom_update_byte((unsigned char*)pos, (unsigned char)((*value) & 0xff));
  2748. eeprom_update_byte((unsigned char*)pos + 1, (unsigned char)((*value) >> 8));
  2749. }
  2750. // Read a single axis babystep value.
  2751. void EEPROM_read_B(int pos, int* value)
  2752. {
  2753. *value = (int)eeprom_read_byte((unsigned char*)pos) | (int)(eeprom_read_byte((unsigned char*)pos + 1) << 8);
  2754. }
  2755. // Note: the colon behind the text (X, Y, Z) is necessary to greatly shorten
  2756. // the implementation of menu_draw_float31
  2757. static void lcd_move_x() {
  2758. _lcd_move(PSTR("X:"), X_AXIS, X_MIN_POS, X_MAX_POS);
  2759. }
  2760. static void lcd_move_y() {
  2761. _lcd_move(PSTR("Y:"), Y_AXIS, Y_MIN_POS, Y_MAX_POS);
  2762. }
  2763. static void lcd_move_z() {
  2764. _lcd_move(PSTR("Z:"), Z_AXIS, Z_MIN_POS, Z_MAX_POS);
  2765. }
  2766. /**
  2767. * @brief Adjust first layer offset from bed if axis is Z_AXIS
  2768. *
  2769. * If menu is left (button pushed or timed out), value is stored to EEPROM and
  2770. * if the axis is Z_AXIS, CALIBRATION_STATUS_CALIBRATED is also stored.
  2771. * Purpose of this function for other axis then Z is unknown.
  2772. *
  2773. * @param axis AxisEnum X_AXIS Y_AXIS Z_AXIS
  2774. * other value leads to storing Z_AXIS
  2775. * @param msg text to be displayed
  2776. */
  2777. static void lcd_babystep_z()
  2778. {
  2779. typedef struct
  2780. {
  2781. int8_t status;
  2782. int16_t babystepMemZ;
  2783. float babystepMemMMZ;
  2784. } _menu_data_t;
  2785. static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
  2786. _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
  2787. if (_md->status == 0)
  2788. {
  2789. // Menu was entered.
  2790. // Initialize its status.
  2791. _md->status = 1;
  2792. check_babystep();
  2793. if(!eeprom_is_sheet_initialized(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))){
  2794. _md->babystepMemZ = 0;
  2795. }
  2796. else{
  2797. _md->babystepMemZ = eeprom_read_word(reinterpret_cast<uint16_t *>(&(EEPROM_Sheets_base->
  2798. s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset)));
  2799. }
  2800. // same logic as in babystep_load
  2801. if (calibration_status() >= CALIBRATION_STATUS_LIVE_ADJUST)
  2802. _md->babystepMemZ = 0;
  2803. _md->babystepMemMMZ = _md->babystepMemZ/cs.axis_steps_per_unit[Z_AXIS];
  2804. lcd_draw_update = 1;
  2805. //SERIAL_ECHO("Z baby step: ");
  2806. //SERIAL_ECHO(_md->babystepMem[2]);
  2807. // Wait 90 seconds before closing the live adjust dialog.
  2808. lcd_timeoutToStatus.start();
  2809. }
  2810. if (lcd_encoder != 0)
  2811. {
  2812. if (homing_flag) lcd_encoder = 0;
  2813. _md->babystepMemZ += (int)lcd_encoder;
  2814. if (_md->babystepMemZ < Z_BABYSTEP_MIN) _md->babystepMemZ = Z_BABYSTEP_MIN; //-3999 -> -9.99 mm
  2815. else if (_md->babystepMemZ > Z_BABYSTEP_MAX) _md->babystepMemZ = Z_BABYSTEP_MAX; //0
  2816. else
  2817. {
  2818. CRITICAL_SECTION_START
  2819. babystepsTodo[Z_AXIS] += (int)lcd_encoder;
  2820. CRITICAL_SECTION_END
  2821. }
  2822. _md->babystepMemMMZ = _md->babystepMemZ/cs.axis_steps_per_unit[Z_AXIS];
  2823. _delay(50);
  2824. lcd_encoder = 0;
  2825. lcd_draw_update = 1;
  2826. }
  2827. if (lcd_draw_update)
  2828. {
  2829. SheetFormatBuffer buffer;
  2830. menu_format_sheet_E(EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))], buffer);
  2831. lcd_set_cursor(0, 0);
  2832. lcd_print(buffer.c);
  2833. lcd_set_cursor(0, 1);
  2834. menu_draw_float13(_i("Adjusting Z:"), _md->babystepMemMMZ); ////MSG_BABYSTEPPING_Z c=15 Beware: must include the ':' as its last character
  2835. }
  2836. if (LCD_CLICKED || menu_leaving)
  2837. {
  2838. // Only update the EEPROM when leaving the menu.
  2839. uint8_t active_sheet=eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet));
  2840. eeprom_update_word(reinterpret_cast<uint16_t *>(&(EEPROM_Sheets_base->s[active_sheet].z_offset)),_md->babystepMemZ);
  2841. eeprom_update_byte(&(EEPROM_Sheets_base->s[active_sheet].bed_temp),target_temperature_bed);
  2842. #ifdef PINDA_THERMISTOR
  2843. eeprom_update_byte(&(EEPROM_Sheets_base->s[active_sheet].pinda_temp),current_temperature_pinda);
  2844. #endif //PINDA_THERMISTOR
  2845. calibration_status_store(CALIBRATION_STATUS_CALIBRATED);
  2846. }
  2847. if (LCD_CLICKED) menu_back();
  2848. }
  2849. typedef struct
  2850. { // 12bytes + 9bytes = 21bytes total
  2851. menu_data_edit_t reserved; //12 bytes reserved for number editing functions
  2852. int8_t status; // 1byte
  2853. int16_t left; // 2byte
  2854. int16_t right; // 2byte
  2855. int16_t front; // 2byte
  2856. int16_t rear; // 2byte
  2857. } _menu_data_adjust_bed_t;
  2858. static_assert(sizeof(menu_data)>= sizeof(_menu_data_adjust_bed_t),"_menu_data_adjust_bed_t doesn't fit into menu_data");
  2859. void lcd_adjust_bed_reset(void)
  2860. {
  2861. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID, 1);
  2862. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_LEFT , 0);
  2863. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_RIGHT, 0);
  2864. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_FRONT, 0);
  2865. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_REAR , 0);
  2866. _menu_data_adjust_bed_t* _md = (_menu_data_adjust_bed_t*)&(menu_data[0]);
  2867. _md->status = 0;
  2868. }
  2869. //! @brief Show Bed level correct
  2870. //!
  2871. //! @code{.unparsed}
  2872. //! |01234567890123456789|
  2873. //! |Settings: | MSG_SETTINGS
  2874. //! |Left side [um]: | MSG_BED_CORRECTION_LEFT
  2875. //! |Right side[um]: | MSG_BED_CORRECTION_RIGHT
  2876. //! |Front side[um]: | MSG_BED_CORRECTION_FRONT
  2877. //! |Rear side [um]: | MSG_BED_CORRECTION_REAR
  2878. //! |Reset | MSG_BED_CORRECTION_RESET
  2879. //! ----------------------
  2880. //! @endcode
  2881. void lcd_adjust_bed(void)
  2882. {
  2883. _menu_data_adjust_bed_t* _md = (_menu_data_adjust_bed_t*)&(menu_data[0]);
  2884. if (_md->status == 0)
  2885. {
  2886. // Menu was entered.
  2887. _md->left = 0;
  2888. _md->right = 0;
  2889. _md->front = 0;
  2890. _md->rear = 0;
  2891. if (eeprom_read_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID) == 1)
  2892. {
  2893. _md->left = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_LEFT);
  2894. _md->right = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_RIGHT);
  2895. _md->front = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_FRONT);
  2896. _md->rear = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_REAR);
  2897. }
  2898. _md->status = 1;
  2899. }
  2900. MENU_BEGIN();
  2901. // leaving menu - this condition must be immediately before MENU_ITEM_BACK_P
  2902. ON_MENU_LEAVE(
  2903. eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_LEFT, _md->left);
  2904. eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_RIGHT, _md->right);
  2905. eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_FRONT, _md->front);
  2906. eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_REAR, _md->rear);
  2907. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID, 1);
  2908. );
  2909. MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
  2910. MENU_ITEM_EDIT_int3_P(_i("Left side [um]"), &_md->left, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_LEFT c=14 r=1
  2911. MENU_ITEM_EDIT_int3_P(_i("Right side[um]"), &_md->right, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_RIGHT c=14 r=1
  2912. MENU_ITEM_EDIT_int3_P(_i("Front side[um]"), &_md->front, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_FRONT c=14 r=1
  2913. MENU_ITEM_EDIT_int3_P(_i("Rear side [um]"), &_md->rear, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_REAR c=14 r=1
  2914. MENU_ITEM_FUNCTION_P(_i("Reset"), lcd_adjust_bed_reset);////MSG_BED_CORRECTION_RESET
  2915. MENU_END();
  2916. }
  2917. //! @brief Show PID Extruder
  2918. //!
  2919. //! @code{.unparsed}
  2920. //! |01234567890123456789|
  2921. //! | Set temperature: | MSG_SET_TEMPERATURE
  2922. //! | |
  2923. //! | 210 |
  2924. //! | |
  2925. //! ----------------------
  2926. //! @endcode
  2927. void pid_extruder()
  2928. {
  2929. lcd_clear();
  2930. lcd_set_cursor(1, 0);
  2931. lcd_puts_P(_i("Set temperature:"));////MSG_SET_TEMPERATURE c=19 r=1
  2932. pid_temp += int(lcd_encoder);
  2933. if (pid_temp > HEATER_0_MAXTEMP) pid_temp = HEATER_0_MAXTEMP;
  2934. if (pid_temp < HEATER_0_MINTEMP) pid_temp = HEATER_0_MINTEMP;
  2935. lcd_encoder = 0;
  2936. lcd_set_cursor(1, 2);
  2937. lcd_print(ftostr3(pid_temp));
  2938. if (lcd_clicked()) {
  2939. lcd_commands_type = LcdCommands::PidExtruder;
  2940. lcd_return_to_status();
  2941. lcd_update(2);
  2942. }
  2943. }
  2944. /*
  2945. void lcd_adjust_z() {
  2946. int enc_dif = 0;
  2947. int cursor_pos = 1;
  2948. int fsm = 0;
  2949. lcd_clear();
  2950. lcd_set_cursor(0, 0);
  2951. lcd_puts_P(_i("Auto adjust Z?"));////MSG_ADJUSTZ
  2952. lcd_set_cursor(1, 1);
  2953. lcd_puts_P(_T(MSG_YES));
  2954. lcd_set_cursor(1, 2);
  2955. lcd_puts_P(_T(MSG_NO));
  2956. lcd_set_cursor(0, 1);
  2957. lcd_print(">");
  2958. enc_dif = lcd_encoder_diff;
  2959. while (fsm == 0) {
  2960. manage_heater();
  2961. manage_inactivity(true);
  2962. if ( abs((enc_dif - lcd_encoder_diff)) > 4 ) {
  2963. if ( (abs(enc_dif - lcd_encoder_diff)) > 1 ) {
  2964. if (enc_dif > lcd_encoder_diff ) {
  2965. cursor_pos --;
  2966. }
  2967. if (enc_dif < lcd_encoder_diff ) {
  2968. cursor_pos ++;
  2969. }
  2970. if (cursor_pos > 2) {
  2971. cursor_pos = 2;
  2972. }
  2973. if (cursor_pos < 1) {
  2974. cursor_pos = 1;
  2975. }
  2976. lcd_set_cursor(0, 1);
  2977. lcd_print(" ");
  2978. lcd_set_cursor(0, 2);
  2979. lcd_print(" ");
  2980. lcd_set_cursor(0, cursor_pos);
  2981. lcd_print(">");
  2982. enc_dif = lcd_encoder_diff;
  2983. _delay(100);
  2984. }
  2985. }
  2986. if (lcd_clicked()) {
  2987. fsm = cursor_pos;
  2988. if (fsm == 1) {
  2989. int babystepLoadZ = 0;
  2990. EEPROM_read_B(EEPROM_BABYSTEP_Z, &babystepLoadZ);
  2991. CRITICAL_SECTION_START
  2992. babystepsTodo[Z_AXIS] = babystepLoadZ;
  2993. CRITICAL_SECTION_END
  2994. } else {
  2995. int zero = 0;
  2996. EEPROM_save_B(EEPROM_BABYSTEP_X, &zero);
  2997. EEPROM_save_B(EEPROM_BABYSTEP_Y, &zero);
  2998. EEPROM_save_B(EEPROM_BABYSTEP_Z, &zero);
  2999. }
  3000. _delay(500);
  3001. }
  3002. };
  3003. lcd_clear();
  3004. lcd_return_to_status();
  3005. }*/
  3006. #ifdef PINDA_THERMISTOR
  3007. bool lcd_wait_for_pinda(float temp) {
  3008. lcd_set_custom_characters_degree();
  3009. setAllTargetHotends(0);
  3010. setTargetBed(0);
  3011. LongTimer pinda_timeout;
  3012. pinda_timeout.start();
  3013. bool target_temp_reached = true;
  3014. while (current_temperature_pinda > temp){
  3015. lcd_display_message_fullscreen_P(_i("Waiting for PINDA probe cooling"));////MSG_WAITING_TEMP_PINDA c=20 r=3
  3016. lcd_set_cursor(0, 4);
  3017. lcd_print(LCD_STR_THERMOMETER[0]);
  3018. lcd_print(ftostr3(current_temperature_pinda));
  3019. lcd_print("/");
  3020. lcd_print(ftostr3(temp));
  3021. lcd_print(LCD_STR_DEGREE);
  3022. delay_keep_alive(1000);
  3023. serialecho_temperatures();
  3024. if (pinda_timeout.expired(8 * 60 * 1000ul)) { //PINDA cooling from 60 C to 35 C takes about 7 minutes
  3025. target_temp_reached = false;
  3026. break;
  3027. }
  3028. }
  3029. lcd_set_custom_characters_arrows();
  3030. lcd_update_enable(true);
  3031. return target_temp_reached;
  3032. }
  3033. #endif //PINDA_THERMISTOR
  3034. void lcd_wait_for_heater() {
  3035. lcd_display_message_fullscreen_P(_T(MSG_WIZARD_HEATING));
  3036. lcd_set_degree();
  3037. lcd_set_cursor(0, 4);
  3038. lcd_print(LCD_STR_THERMOMETER[0]);
  3039. lcd_print(ftostr3(degHotend(active_extruder)));
  3040. lcd_print("/");
  3041. lcd_print(ftostr3(degTargetHotend(active_extruder)));
  3042. lcd_print(LCD_STR_DEGREE);
  3043. }
  3044. void lcd_wait_for_cool_down() {
  3045. lcd_set_custom_characters_degree();
  3046. setAllTargetHotends(0);
  3047. setTargetBed(0);
  3048. int fanSpeedBckp = fanSpeed;
  3049. fanSpeed = 255;
  3050. while ((degHotend(0)>MAX_HOTEND_TEMP_CALIBRATION) || (degBed() > MAX_BED_TEMP_CALIBRATION)) {
  3051. lcd_display_message_fullscreen_P(_i("Waiting for nozzle and bed cooling"));////MSG_WAITING_TEMP c=20 r=3
  3052. lcd_set_cursor(0, 4);
  3053. lcd_print(LCD_STR_THERMOMETER[0]);
  3054. lcd_print(ftostr3(degHotend(0)));
  3055. lcd_print("/0");
  3056. lcd_print(LCD_STR_DEGREE);
  3057. lcd_set_cursor(9, 4);
  3058. lcd_print(LCD_STR_BEDTEMP[0]);
  3059. lcd_print(ftostr3(degBed()));
  3060. lcd_print("/0");
  3061. lcd_print(LCD_STR_DEGREE);
  3062. lcd_set_custom_characters();
  3063. delay_keep_alive(1000);
  3064. serialecho_temperatures();
  3065. }
  3066. fanSpeed = fanSpeedBckp;
  3067. lcd_set_custom_characters_arrows();
  3068. lcd_update_enable(true);
  3069. }
  3070. // Lets the user move the Z carriage up to the end stoppers.
  3071. // When done, it sets the current Z to Z_MAX_POS and returns true.
  3072. // Otherwise the Z calibration is not changed and false is returned.
  3073. #ifndef TMC2130
  3074. bool lcd_calibrate_z_end_stop_manual(bool only_z)
  3075. {
  3076. // Don't know where we are. Let's claim we are Z=0, so the soft end stops will not be triggered when moving up.
  3077. current_position[Z_AXIS] = 0;
  3078. plan_set_position_curposXYZE();
  3079. // Until confirmed by the confirmation dialog.
  3080. for (;;) {
  3081. const char *msg = only_z ? _i("Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done.") : _i("Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done.");////MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8////MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
  3082. const char *msg_next = lcd_display_message_fullscreen_P(msg);
  3083. const bool multi_screen = msg_next != NULL;
  3084. unsigned long previous_millis_msg = _millis();
  3085. // Until the user finishes the z up movement.
  3086. lcd_encoder_diff = 0;
  3087. lcd_encoder = 0;
  3088. for (;;) {
  3089. manage_heater();
  3090. manage_inactivity(true);
  3091. if (abs(lcd_encoder_diff) >= ENCODER_PULSES_PER_STEP) {
  3092. _delay(50);
  3093. lcd_encoder += abs(lcd_encoder_diff / ENCODER_PULSES_PER_STEP);
  3094. lcd_encoder_diff = 0;
  3095. if (! planner_queue_full()) {
  3096. // Only move up, whatever direction the user rotates the encoder.
  3097. current_position[Z_AXIS] += fabs(lcd_encoder);
  3098. lcd_encoder = 0;
  3099. plan_buffer_line_curposXYZE(manual_feedrate[Z_AXIS] / 60);
  3100. }
  3101. }
  3102. if (lcd_clicked()) {
  3103. // Abort a move if in progress.
  3104. planner_abort_hard();
  3105. while (lcd_clicked()) ;
  3106. _delay(10);
  3107. while (lcd_clicked()) ;
  3108. break;
  3109. }
  3110. if (multi_screen && _millis() - previous_millis_msg > 5000) {
  3111. if (msg_next == NULL)
  3112. msg_next = msg;
  3113. msg_next = lcd_display_message_fullscreen_P(msg_next);
  3114. previous_millis_msg = _millis();
  3115. }
  3116. }
  3117. // Let the user confirm, that the Z carriage is at the top end stoppers.
  3118. int8_t result = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Are left and right Z~carriages all up?"), false);////MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
  3119. if (result == -1)
  3120. goto canceled;
  3121. else if (result == 1)
  3122. goto calibrated;
  3123. // otherwise perform another round of the Z up dialog.
  3124. }
  3125. calibrated:
  3126. // Let the machine think the Z axis is a bit higher than it is, so it will not home into the bed
  3127. // during the search for the induction points.
  3128. if ((PRINTER_TYPE == PRINTER_MK25) || (PRINTER_TYPE == PRINTER_MK2) || (PRINTER_TYPE == PRINTER_MK2_SNMM)) {
  3129. current_position[Z_AXIS] = Z_MAX_POS-3.f;
  3130. }
  3131. else {
  3132. current_position[Z_AXIS] = Z_MAX_POS+4.f;
  3133. }
  3134. plan_set_position_curposXYZE();
  3135. return true;
  3136. canceled:
  3137. return false;
  3138. }
  3139. #endif // TMC2130
  3140. static inline bool pgm_is_whitespace(const char *c_addr)
  3141. {
  3142. const char c = pgm_read_byte(c_addr);
  3143. return c == ' ' || c == '\t' || c == '\r' || c == '\n';
  3144. }
  3145. static inline bool pgm_is_interpunction(const char *c_addr)
  3146. {
  3147. const char c = pgm_read_byte(c_addr);
  3148. return c == '.' || c == ',' || c == ':'|| c == ';' || c == '?' || c == '!' || c == '/';
  3149. }
  3150. /**
  3151. * @brief show full screen message
  3152. *
  3153. * This function is non-blocking
  3154. * @param msg message to be displayed from PROGMEM
  3155. * @param nlines
  3156. * @return rest of the text (to be displayed on next page)
  3157. */
  3158. static const char* lcd_display_message_fullscreen_nonBlocking_P(const char *msg, uint8_t &nlines)
  3159. {
  3160. lcd_set_cursor(0, 0);
  3161. const char *msgend = msg;
  3162. uint8_t row = 0;
  3163. bool multi_screen = false;
  3164. for (; row < 4; ++ row) {
  3165. while (pgm_is_whitespace(msg))
  3166. ++ msg;
  3167. if (pgm_read_byte(msg) == 0)
  3168. // End of the message.
  3169. break;
  3170. lcd_set_cursor(0, row);
  3171. uint8_t linelen = min(strlen_P(msg), 20);
  3172. const char *msgend2 = msg + linelen;
  3173. msgend = msgend2;
  3174. if (row == 3 && linelen == 20) {
  3175. // Last line of the display, full line shall be displayed.
  3176. // Find out, whether this message will be split into multiple screens.
  3177. while (pgm_is_whitespace(msgend))
  3178. ++ msgend;
  3179. multi_screen = pgm_read_byte(msgend) != 0;
  3180. if (multi_screen)
  3181. msgend = (msgend2 -= 2);
  3182. }
  3183. if (pgm_read_byte(msgend) != 0 && ! pgm_is_whitespace(msgend) && ! pgm_is_interpunction(msgend)) {
  3184. // Splitting a word. Find the start of the current word.
  3185. while (msgend > msg && ! pgm_is_whitespace(msgend - 1))
  3186. -- msgend;
  3187. if (msgend == msg)
  3188. // Found a single long word, which cannot be split. Just cut it.
  3189. msgend = msgend2;
  3190. }
  3191. for (; msg < msgend; ++ msg) {
  3192. char c = char(pgm_read_byte(msg));
  3193. if (c == '~')
  3194. c = ' ';
  3195. lcd_print(c);
  3196. }
  3197. }
  3198. if (multi_screen) {
  3199. // Display the "next screen" indicator character.
  3200. // lcd_set_custom_characters_arrows();
  3201. lcd_set_custom_characters_nextpage();
  3202. lcd_set_cursor(19, 3);
  3203. // Display the down arrow.
  3204. lcd_print(char(1));
  3205. }
  3206. nlines = row;
  3207. return multi_screen ? msgend : NULL;
  3208. }
  3209. const char* lcd_display_message_fullscreen_P(const char *msg, uint8_t &nlines)
  3210. {
  3211. // Disable update of the screen by the usual lcd_update(0) routine.
  3212. lcd_update_enable(false);
  3213. lcd_clear();
  3214. // uint8_t nlines;
  3215. return lcd_display_message_fullscreen_nonBlocking_P(msg, nlines);
  3216. }
  3217. const char* lcd_display_message_fullscreen_P(const char *msg)
  3218. {
  3219. uint8_t nlines;
  3220. return lcd_display_message_fullscreen_P(msg, nlines);
  3221. }
  3222. /**
  3223. * @brief show full screen message and wait
  3224. *
  3225. * This function is blocking.
  3226. * @param msg message to be displayed from PROGMEM
  3227. */
  3228. void lcd_show_fullscreen_message_and_wait_P(const char *msg)
  3229. {
  3230. LcdUpdateDisabler lcdUpdateDisabler;
  3231. const char *msg_next = lcd_display_message_fullscreen_P(msg);
  3232. bool multi_screen = msg_next != NULL;
  3233. lcd_set_custom_characters_nextpage();
  3234. lcd_consume_click();
  3235. KEEPALIVE_STATE(PAUSED_FOR_USER);
  3236. // Until confirmed by a button click.
  3237. for (;;) {
  3238. if (!multi_screen) {
  3239. lcd_set_cursor(19, 3);
  3240. // Display the confirm char.
  3241. lcd_print(char(2));
  3242. }
  3243. // Wait for 5 seconds before displaying the next text.
  3244. for (uint8_t i = 0; i < 100; ++ i) {
  3245. delay_keep_alive(50);
  3246. if (lcd_clicked()) {
  3247. if (msg_next == NULL) {
  3248. KEEPALIVE_STATE(IN_HANDLER);
  3249. lcd_set_custom_characters();
  3250. lcd_update_enable(true);
  3251. lcd_update(2);
  3252. return;
  3253. }
  3254. else {
  3255. break;
  3256. }
  3257. }
  3258. }
  3259. if (multi_screen) {
  3260. if (msg_next == NULL)
  3261. msg_next = msg;
  3262. msg_next = lcd_display_message_fullscreen_P(msg_next);
  3263. if (msg_next == NULL) {
  3264. lcd_set_cursor(19, 3);
  3265. // Display the confirm char.
  3266. lcd_print(char(2));
  3267. }
  3268. }
  3269. }
  3270. }
  3271. bool lcd_wait_for_click_delay(uint16_t nDelay)
  3272. // nDelay :: timeout [s] (0 ~ no timeout)
  3273. // true ~ clicked, false ~ delayed
  3274. {
  3275. bool bDelayed;
  3276. long nTime0 = _millis()/1000;
  3277. lcd_consume_click();
  3278. KEEPALIVE_STATE(PAUSED_FOR_USER);
  3279. for (;;) {
  3280. manage_heater();
  3281. manage_inactivity(true);
  3282. bDelayed = ((_millis()/1000-nTime0) > nDelay);
  3283. bDelayed = (bDelayed && (nDelay != 0)); // 0 ~ no timeout, always waiting for click
  3284. if (lcd_clicked() || bDelayed) {
  3285. KEEPALIVE_STATE(IN_HANDLER);
  3286. return(!bDelayed);
  3287. }
  3288. }
  3289. }
  3290. void lcd_wait_for_click()
  3291. {
  3292. lcd_wait_for_click_delay(0);
  3293. }
  3294. //! @brief Show multiple screen message with yes and no possible choices and wait with possible timeout
  3295. //! @param msg Message to show
  3296. //! @param allow_timeouting if true, allows time outing of the screen
  3297. //! @param default_yes if true, yes choice is selected by default, otherwise no choice is preselected
  3298. //! @retval 1 yes choice selected by user
  3299. //! @retval 0 no choice selected by user
  3300. //! @retval -1 screen timed out
  3301. int8_t lcd_show_multiscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting, bool default_yes) //currently just max. n*4 + 3 lines supported (set in language header files)
  3302. {
  3303. return lcd_show_multiscreen_message_two_choices_and_wait_P(msg, allow_timeouting, default_yes, _T(MSG_YES), _T(MSG_NO));
  3304. }
  3305. //! @brief Show multiple screen message with two possible choices and wait with possible timeout
  3306. //! @param msg Message to show
  3307. //! @param allow_timeouting if true, allows time outing of the screen
  3308. //! @param default_first if true, fist choice is selected by default, otherwise second choice is preselected
  3309. //! @param first_choice text caption of first possible choice
  3310. //! @param second_choice text caption of second possible choice
  3311. //! @retval 1 first choice selected by user
  3312. //! @retval 0 second choice selected by user
  3313. //! @retval -1 screen timed out
  3314. int8_t lcd_show_multiscreen_message_two_choices_and_wait_P(const char *msg, bool allow_timeouting, bool default_first,
  3315. const char *first_choice, const char *second_choice)
  3316. {
  3317. const char *msg_next = lcd_display_message_fullscreen_P(msg);
  3318. bool multi_screen = msg_next != NULL;
  3319. bool yes = default_first ? true : false;
  3320. // Wait for user confirmation or a timeout.
  3321. unsigned long previous_millis_cmd = _millis();
  3322. int8_t enc_dif = lcd_encoder_diff;
  3323. lcd_consume_click();
  3324. //KEEPALIVE_STATE(PAUSED_FOR_USER);
  3325. for (;;) {
  3326. for (uint8_t i = 0; i < 100; ++i) {
  3327. delay_keep_alive(50);
  3328. if (allow_timeouting && _millis() - previous_millis_cmd > LCD_TIMEOUT_TO_STATUS)
  3329. return -1;
  3330. manage_heater();
  3331. manage_inactivity(true);
  3332. if (abs(enc_dif - lcd_encoder_diff) > 4) {
  3333. if (msg_next == NULL) {
  3334. lcd_set_cursor(0, 3);
  3335. if (enc_dif < lcd_encoder_diff && yes) {
  3336. lcd_puts_P((PSTR(" ")));
  3337. lcd_set_cursor(7, 3);
  3338. lcd_puts_P((PSTR(">")));
  3339. yes = false;
  3340. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  3341. }
  3342. else if (enc_dif > lcd_encoder_diff && !yes) {
  3343. lcd_puts_P((PSTR(">")));
  3344. lcd_set_cursor(7, 3);
  3345. lcd_puts_P((PSTR(" ")));
  3346. yes = true;
  3347. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  3348. }
  3349. enc_dif = lcd_encoder_diff;
  3350. }
  3351. else {
  3352. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  3353. break; //turning knob skips waiting loop
  3354. }
  3355. }
  3356. if (lcd_clicked()) {
  3357. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  3358. if (msg_next == NULL) {
  3359. //KEEPALIVE_STATE(IN_HANDLER);
  3360. lcd_set_custom_characters();
  3361. return yes;
  3362. }
  3363. else break;
  3364. }
  3365. }
  3366. if (multi_screen) {
  3367. if (msg_next == NULL) {
  3368. msg_next = msg;
  3369. }
  3370. msg_next = lcd_display_message_fullscreen_P(msg_next);
  3371. }
  3372. if (msg_next == NULL) {
  3373. lcd_set_cursor(0, 3);
  3374. if (yes) lcd_puts_P(PSTR(">"));
  3375. lcd_set_cursor(1, 3);
  3376. lcd_puts_P(first_choice);
  3377. lcd_set_cursor(7, 3);
  3378. if (!yes) lcd_puts_P(PSTR(">"));
  3379. lcd_set_cursor(8, 3);
  3380. lcd_puts_P(second_choice);
  3381. }
  3382. }
  3383. }
  3384. //! @brief Show single screen message with yes and no possible choices and wait with possible timeout
  3385. //! @param msg Message to show
  3386. //! @param allow_timeouting if true, allows time outing of the screen
  3387. //! @param default_yes if true, yes choice is selected by default, otherwise no choice is preselected
  3388. //! @retval 1 yes choice selected by user
  3389. //! @retval 0 no choice selected by user
  3390. //! @retval -1 screen timed out
  3391. int8_t lcd_show_fullscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting, bool default_yes)
  3392. {
  3393. lcd_display_message_fullscreen_P(msg);
  3394. if (default_yes) {
  3395. lcd_set_cursor(0, 2);
  3396. lcd_puts_P(PSTR(">"));
  3397. lcd_puts_P(_T(MSG_YES));
  3398. lcd_set_cursor(1, 3);
  3399. lcd_puts_P(_T(MSG_NO));
  3400. }
  3401. else {
  3402. lcd_set_cursor(1, 2);
  3403. lcd_puts_P(_T(MSG_YES));
  3404. lcd_set_cursor(0, 3);
  3405. lcd_puts_P(PSTR(">"));
  3406. lcd_puts_P(_T(MSG_NO));
  3407. }
  3408. int8_t retval = default_yes ? true : false;
  3409. // Wait for user confirmation or a timeout.
  3410. unsigned long previous_millis_cmd = _millis();
  3411. int8_t enc_dif = lcd_encoder_diff;
  3412. lcd_consume_click();
  3413. KEEPALIVE_STATE(PAUSED_FOR_USER);
  3414. for (;;) {
  3415. if (allow_timeouting && _millis() - previous_millis_cmd > LCD_TIMEOUT_TO_STATUS)
  3416. {
  3417. retval = -1;
  3418. break;
  3419. }
  3420. manage_heater();
  3421. manage_inactivity(true);
  3422. if (abs(enc_dif - lcd_encoder_diff) > 4) {
  3423. lcd_set_cursor(0, 2);
  3424. if (enc_dif < lcd_encoder_diff && retval) {
  3425. lcd_puts_P((PSTR(" ")));
  3426. lcd_set_cursor(0, 3);
  3427. lcd_puts_P((PSTR(">")));
  3428. retval = 0;
  3429. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  3430. }
  3431. else if (enc_dif > lcd_encoder_diff && !retval) {
  3432. lcd_puts_P((PSTR(">")));
  3433. lcd_set_cursor(0, 3);
  3434. lcd_puts_P((PSTR(" ")));
  3435. retval = 1;
  3436. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  3437. }
  3438. enc_dif = lcd_encoder_diff;
  3439. }
  3440. if (lcd_clicked()) {
  3441. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  3442. KEEPALIVE_STATE(IN_HANDLER);
  3443. break;
  3444. }
  3445. }
  3446. lcd_encoder_diff = 0;
  3447. return retval;
  3448. }
  3449. void lcd_bed_calibration_show_result(BedSkewOffsetDetectionResultType result, uint8_t point_too_far_mask)
  3450. {
  3451. const char *msg = NULL;
  3452. if (result == BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND) {
  3453. lcd_show_fullscreen_message_and_wait_P(_i("XYZ calibration failed. Bed calibration point was not found."));////MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=8
  3454. } else if (result == BED_SKEW_OFFSET_DETECTION_FITTING_FAILED) {
  3455. if (point_too_far_mask == 0)
  3456. msg = _T(MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED);
  3457. else if (point_too_far_mask == 2 || point_too_far_mask == 7)
  3458. // Only the center point or all the three front points.
  3459. msg = _i("XYZ calibration failed. Front calibration points not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=8
  3460. else if ((point_too_far_mask & 1) == 0)
  3461. // The right and maybe the center point out of reach.
  3462. msg = _i("XYZ calibration failed. Right front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=8
  3463. else
  3464. // The left and maybe the center point out of reach.
  3465. msg = _i("XYZ calibration failed. Left front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
  3466. lcd_show_fullscreen_message_and_wait_P(msg);
  3467. } else {
  3468. if (point_too_far_mask != 0) {
  3469. if (point_too_far_mask == 2 || point_too_far_mask == 7)
  3470. // Only the center point or all the three front points.
  3471. msg = _i("XYZ calibration compromised. Front calibration points not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
  3472. else if ((point_too_far_mask & 1) == 0)
  3473. // The right and maybe the center point out of reach.
  3474. msg = _i("XYZ calibration compromised. Right front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
  3475. else
  3476. // The left and maybe the center point out of reach.
  3477. msg = _i("XYZ calibration compromised. Left front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
  3478. lcd_show_fullscreen_message_and_wait_P(msg);
  3479. }
  3480. if (point_too_far_mask == 0 || result > 0) {
  3481. switch (result) {
  3482. default:
  3483. // should not happen
  3484. msg = _T(MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED);
  3485. break;
  3486. case BED_SKEW_OFFSET_DETECTION_PERFECT:
  3487. msg = _i("XYZ calibration ok. X/Y axes are perpendicular. Congratulations!");////MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
  3488. break;
  3489. case BED_SKEW_OFFSET_DETECTION_SKEW_MILD:
  3490. msg = _i("XYZ calibration all right. X/Y axes are slightly skewed. Good job!");////MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
  3491. break;
  3492. case BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME:
  3493. msg = _i("XYZ calibration all right. Skew will be corrected automatically.");////MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
  3494. break;
  3495. }
  3496. lcd_show_fullscreen_message_and_wait_P(msg);
  3497. }
  3498. }
  3499. }
  3500. void lcd_temp_cal_show_result(bool result) {
  3501. custom_message_type = CustomMsg::Status;
  3502. disable_x();
  3503. disable_y();
  3504. disable_z();
  3505. disable_e0();
  3506. disable_e1();
  3507. disable_e2();
  3508. setTargetBed(0); //set bed target temperature back to 0
  3509. if (result == true) {
  3510. eeprom_update_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 1);
  3511. SERIAL_ECHOLNPGM("Temperature calibration done. Continue with pressing the knob.");
  3512. lcd_show_fullscreen_message_and_wait_P(_T(MSG_TEMP_CALIBRATION_DONE));
  3513. eeprom_update_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE, 1);
  3514. }
  3515. else {
  3516. eeprom_update_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 0);
  3517. SERIAL_ECHOLNPGM("Temperature calibration failed. Continue with pressing the knob.");
  3518. lcd_show_fullscreen_message_and_wait_P(_i("Temperature calibration failed"));////MSG_TEMP_CAL_FAILED c=20 r=8
  3519. eeprom_update_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE, 0);
  3520. }
  3521. lcd_update_enable(true);
  3522. lcd_update(2);
  3523. }
  3524. static void lcd_show_end_stops() {
  3525. lcd_set_cursor(0, 0);
  3526. lcd_puts_P((PSTR("End stops diag")));
  3527. lcd_set_cursor(0, 1);
  3528. lcd_puts_P((READ(X_MIN_PIN) ^ (bool)X_MIN_ENDSTOP_INVERTING) ? (PSTR("X1")) : (PSTR("X0")));
  3529. lcd_set_cursor(0, 2);
  3530. lcd_puts_P((READ(Y_MIN_PIN) ^ (bool)Y_MIN_ENDSTOP_INVERTING) ? (PSTR("Y1")) : (PSTR("Y0")));
  3531. lcd_set_cursor(0, 3);
  3532. lcd_puts_P((READ(Z_MIN_PIN) ^ (bool)Z_MIN_ENDSTOP_INVERTING) ? (PSTR("Z1")) : (PSTR("Z0")));
  3533. }
  3534. #ifndef TMC2130
  3535. static void menu_show_end_stops() {
  3536. lcd_show_end_stops();
  3537. if (LCD_CLICKED) menu_back();
  3538. }
  3539. #endif // not defined TMC2130
  3540. // Lets the user move the Z carriage up to the end stoppers.
  3541. // When done, it sets the current Z to Z_MAX_POS and returns true.
  3542. // Otherwise the Z calibration is not changed and false is returned.
  3543. void lcd_diag_show_end_stops()
  3544. {
  3545. lcd_clear();
  3546. lcd_consume_click();
  3547. for (;;) {
  3548. manage_heater();
  3549. manage_inactivity(true);
  3550. lcd_show_end_stops();
  3551. if (lcd_clicked()) {
  3552. break;
  3553. }
  3554. }
  3555. lcd_clear();
  3556. lcd_return_to_status();
  3557. }
  3558. static void lcd_print_state(uint8_t state)
  3559. {
  3560. switch (state) {
  3561. case STATE_ON:
  3562. lcd_puts_P(_N(" 1"));
  3563. break;
  3564. case STATE_OFF:
  3565. lcd_puts_P(_N(" 0"));
  3566. break;
  3567. default:
  3568. lcd_puts_P(_T(MSG_NA));
  3569. break;
  3570. }
  3571. }
  3572. static void lcd_show_sensors_state()
  3573. {
  3574. //0: N/A; 1: OFF; 2: ON
  3575. uint8_t pinda_state = STATE_NA;
  3576. uint8_t finda_state = STATE_NA;
  3577. uint8_t idler_state = STATE_NA;
  3578. pinda_state = READ(Z_MIN_PIN);
  3579. if (mmu_enabled && ((_millis() - mmu_last_finda_response) < 1000ul) )
  3580. {
  3581. finda_state = mmu_finda;
  3582. }
  3583. if (ir_sensor_detected) {
  3584. idler_state = !PIN_GET(IR_SENSOR_PIN);
  3585. }
  3586. lcd_puts_at_P(0, 0, _i("Sensor state"));
  3587. lcd_puts_at_P(1, 1, _i("PINDA:"));
  3588. lcd_set_cursor(LCD_WIDTH - 4, 1);
  3589. lcd_print_state(pinda_state);
  3590. lcd_puts_at_P(1, 2, _i("FINDA:"));
  3591. lcd_set_cursor(LCD_WIDTH - 4, 2);
  3592. lcd_print_state(finda_state);
  3593. lcd_puts_at_P(1, 3, _i("IR:"));
  3594. lcd_set_cursor(LCD_WIDTH - 4, 3);
  3595. lcd_print_state(idler_state);
  3596. }
  3597. void lcd_menu_show_sensors_state() // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
  3598. {
  3599. lcd_timeoutToStatus.stop();
  3600. lcd_show_sensors_state();
  3601. if(LCD_CLICKED)
  3602. {
  3603. lcd_timeoutToStatus.start();
  3604. menu_back();
  3605. }
  3606. }
  3607. void prusa_statistics_err(char c){
  3608. SERIAL_ECHO("{[ERR:");
  3609. SERIAL_ECHO(c);
  3610. SERIAL_ECHO(']');
  3611. prusa_stat_farm_number();
  3612. }
  3613. static void prusa_statistics_case0(uint8_t statnr){
  3614. SERIAL_ECHO('{');
  3615. prusa_stat_printerstatus(statnr);
  3616. prusa_stat_farm_number();
  3617. prusa_stat_printinfo();
  3618. }
  3619. void prusa_statistics(int _message, uint8_t _fil_nr) {
  3620. #ifdef DEBUG_DISABLE_PRUSA_STATISTICS
  3621. return;
  3622. #endif //DEBUG_DISABLE_PRUSA_STATISTICS
  3623. switch (_message)
  3624. {
  3625. case 0: // default message
  3626. if (busy_state == PAUSED_FOR_USER)
  3627. {
  3628. prusa_statistics_case0(15);
  3629. }
  3630. else if (isPrintPaused)
  3631. {
  3632. prusa_statistics_case0(14);
  3633. }
  3634. else if (IS_SD_PRINTING || loading_flag)
  3635. {
  3636. prusa_statistics_case0(4);
  3637. }
  3638. else
  3639. {
  3640. SERIAL_ECHO('{');
  3641. prusa_stat_printerstatus(1);
  3642. prusa_stat_farm_number();
  3643. prusa_stat_diameter();
  3644. status_number = 1;
  3645. }
  3646. break;
  3647. case 1: // 1 heating
  3648. farm_status = 2;
  3649. SERIAL_ECHO('{');
  3650. prusa_stat_printerstatus(2);
  3651. prusa_stat_farm_number();
  3652. status_number = 2;
  3653. farm_timer = 1;
  3654. break;
  3655. case 2: // heating done
  3656. farm_status = 3;
  3657. SERIAL_ECHO('{');
  3658. prusa_stat_printerstatus(3);
  3659. prusa_stat_farm_number();
  3660. SERIAL_ECHOLN('}');
  3661. status_number = 3;
  3662. farm_timer = 1;
  3663. if (IS_SD_PRINTING || loading_flag)
  3664. {
  3665. farm_status = 4;
  3666. SERIAL_ECHO('{');
  3667. prusa_stat_printerstatus(4);
  3668. prusa_stat_farm_number();
  3669. status_number = 4;
  3670. }
  3671. else
  3672. {
  3673. SERIAL_ECHO('{');
  3674. prusa_stat_printerstatus(3);
  3675. prusa_stat_farm_number();
  3676. status_number = 3;
  3677. }
  3678. farm_timer = 1;
  3679. break;
  3680. case 3: // filament change
  3681. // must do a return here to prevent doing SERIAL_ECHOLN("}") at the very end of this function
  3682. // saved a considerable amount of FLASH
  3683. return;
  3684. break;
  3685. case 4: // print succesfull
  3686. SERIAL_ECHO("{[RES:1][FIL:");
  3687. MYSERIAL.print(int(_fil_nr));
  3688. SERIAL_ECHO(']');
  3689. prusa_stat_printerstatus(status_number);
  3690. prusa_stat_farm_number();
  3691. farm_timer = 2;
  3692. break;
  3693. case 5: // print not succesfull
  3694. SERIAL_ECHO("{[RES:0][FIL:");
  3695. MYSERIAL.print(int(_fil_nr));
  3696. SERIAL_ECHO(']');
  3697. prusa_stat_printerstatus(status_number);
  3698. prusa_stat_farm_number();
  3699. farm_timer = 2;
  3700. break;
  3701. case 6: // print done
  3702. SERIAL_ECHO("{[PRN:8]");
  3703. prusa_stat_farm_number();
  3704. status_number = 8;
  3705. farm_timer = 2;
  3706. break;
  3707. case 7: // print done - stopped
  3708. SERIAL_ECHO("{[PRN:9]");
  3709. prusa_stat_farm_number();
  3710. status_number = 9;
  3711. farm_timer = 2;
  3712. break;
  3713. case 8: // printer started
  3714. SERIAL_ECHO("{[PRN:0][PFN:");
  3715. status_number = 0;
  3716. SERIAL_ECHO(farm_no);
  3717. SERIAL_ECHO(']');
  3718. farm_timer = 2;
  3719. break;
  3720. case 20: // echo farm no
  3721. SERIAL_ECHO('{');
  3722. prusa_stat_printerstatus(status_number);
  3723. prusa_stat_farm_number();
  3724. farm_timer = 4;
  3725. break;
  3726. case 21: // temperatures
  3727. SERIAL_ECHO('{');
  3728. prusa_stat_temperatures();
  3729. prusa_stat_farm_number();
  3730. prusa_stat_printerstatus(status_number);
  3731. break;
  3732. case 22: // waiting for filament change
  3733. SERIAL_ECHO("{[PRN:5]");
  3734. prusa_stat_farm_number();
  3735. status_number = 5;
  3736. break;
  3737. case 90: // Error - Thermal Runaway
  3738. prusa_statistics_err('1');
  3739. break;
  3740. case 91: // Error - Thermal Runaway Preheat
  3741. prusa_statistics_err('2');
  3742. break;
  3743. case 92: // Error - Min temp
  3744. prusa_statistics_err('3');
  3745. break;
  3746. case 93: // Error - Max temp
  3747. prusa_statistics_err('4');
  3748. break;
  3749. case 99: // heartbeat
  3750. SERIAL_ECHO("{[PRN:99]");
  3751. prusa_stat_temperatures();
  3752. SERIAL_ECHO("[PFN:");
  3753. SERIAL_ECHO(farm_no);
  3754. SERIAL_ECHO(']');
  3755. break;
  3756. }
  3757. SERIAL_ECHOLN('}');
  3758. }
  3759. static void prusa_stat_printerstatus(int _status)
  3760. {
  3761. SERIAL_ECHO("[PRN:");
  3762. SERIAL_ECHO(_status);
  3763. SERIAL_ECHO(']');
  3764. }
  3765. static void prusa_stat_farm_number() {
  3766. SERIAL_ECHO("[PFN:");
  3767. SERIAL_ECHO(farm_no);
  3768. SERIAL_ECHO(']');
  3769. }
  3770. static void prusa_stat_diameter() {
  3771. SERIAL_ECHO("[DIA:");
  3772. SERIAL_ECHO(eeprom_read_word((uint16_t*)EEPROM_NOZZLE_DIAMETER_uM));
  3773. SERIAL_ECHO(']');
  3774. }
  3775. static void prusa_stat_temperatures()
  3776. {
  3777. SERIAL_ECHO("[ST0:");
  3778. SERIAL_ECHO(target_temperature[0]);
  3779. SERIAL_ECHO("][STB:");
  3780. SERIAL_ECHO(target_temperature_bed);
  3781. SERIAL_ECHO("][AT0:");
  3782. SERIAL_ECHO(current_temperature[0]);
  3783. SERIAL_ECHO("][ATB:");
  3784. SERIAL_ECHO(current_temperature_bed);
  3785. SERIAL_ECHO(']');
  3786. }
  3787. static void prusa_stat_printinfo()
  3788. {
  3789. SERIAL_ECHO("[TFU:");
  3790. SERIAL_ECHO(total_filament_used);
  3791. SERIAL_ECHO("][PCD:");
  3792. SERIAL_ECHO(itostr3(card.percentDone()));
  3793. SERIAL_ECHO("][FEM:");
  3794. SERIAL_ECHO(itostr3(feedmultiply));
  3795. SERIAL_ECHO("][FNM:");
  3796. SERIAL_ECHO(longFilenameOLD);
  3797. SERIAL_ECHO("][TIM:");
  3798. if (starttime != 0)
  3799. {
  3800. SERIAL_ECHO(_millis() / 1000 - starttime / 1000);
  3801. }
  3802. else
  3803. {
  3804. SERIAL_ECHO(0);
  3805. }
  3806. SERIAL_ECHO("][FWR:");
  3807. SERIAL_ECHO(FW_VERSION);
  3808. SERIAL_ECHO(']');
  3809. prusa_stat_diameter();
  3810. }
  3811. /*
  3812. void lcd_pick_babystep(){
  3813. int enc_dif = 0;
  3814. int cursor_pos = 1;
  3815. int fsm = 0;
  3816. lcd_clear();
  3817. lcd_set_cursor(0, 0);
  3818. lcd_puts_P(_i("Pick print"));////MSG_PICK_Z
  3819. lcd_set_cursor(3, 2);
  3820. lcd_print("1");
  3821. lcd_set_cursor(3, 3);
  3822. lcd_print("2");
  3823. lcd_set_cursor(12, 2);
  3824. lcd_print("3");
  3825. lcd_set_cursor(12, 3);
  3826. lcd_print("4");
  3827. lcd_set_cursor(1, 2);
  3828. lcd_print(">");
  3829. enc_dif = lcd_encoder_diff;
  3830. while (fsm == 0) {
  3831. manage_heater();
  3832. manage_inactivity(true);
  3833. if ( abs((enc_dif - lcd_encoder_diff)) > 4 ) {
  3834. if ( (abs(enc_dif - lcd_encoder_diff)) > 1 ) {
  3835. if (enc_dif > lcd_encoder_diff ) {
  3836. cursor_pos --;
  3837. }
  3838. if (enc_dif < lcd_encoder_diff ) {
  3839. cursor_pos ++;
  3840. }
  3841. if (cursor_pos > 4) {
  3842. cursor_pos = 4;
  3843. }
  3844. if (cursor_pos < 1) {
  3845. cursor_pos = 1;
  3846. }
  3847. lcd_set_cursor(1, 2);
  3848. lcd_print(" ");
  3849. lcd_set_cursor(1, 3);
  3850. lcd_print(" ");
  3851. lcd_set_cursor(10, 2);
  3852. lcd_print(" ");
  3853. lcd_set_cursor(10, 3);
  3854. lcd_print(" ");
  3855. if (cursor_pos < 3) {
  3856. lcd_set_cursor(1, cursor_pos+1);
  3857. lcd_print(">");
  3858. }else{
  3859. lcd_set_cursor(10, cursor_pos-1);
  3860. lcd_print(">");
  3861. }
  3862. enc_dif = lcd_encoder_diff;
  3863. _delay(100);
  3864. }
  3865. }
  3866. if (lcd_clicked()) {
  3867. fsm = cursor_pos;
  3868. int babyStepZ;
  3869. EEPROM_read_B(EEPROM_BABYSTEP_Z0+((fsm-1)*2),&babyStepZ);
  3870. EEPROM_save_B(EEPROM_BABYSTEP_Z,&babyStepZ);
  3871. calibration_status_store(CALIBRATION_STATUS_CALIBRATED);
  3872. _delay(500);
  3873. }
  3874. };
  3875. lcd_clear();
  3876. lcd_return_to_status();
  3877. }
  3878. */
  3879. void lcd_move_menu_axis()
  3880. {
  3881. MENU_BEGIN();
  3882. MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
  3883. MENU_ITEM_SUBMENU_P(_i("Move X"), lcd_move_x);////MSG_MOVE_X
  3884. MENU_ITEM_SUBMENU_P(_i("Move Y"), lcd_move_y);////MSG_MOVE_Y
  3885. MENU_ITEM_SUBMENU_P(_i("Move Z"), lcd_move_z);////MSG_MOVE_Z
  3886. MENU_ITEM_SUBMENU_P(_i("Extruder"), lcd_move_e);////MSG_MOVE_E
  3887. MENU_END();
  3888. }
  3889. static void lcd_move_menu_1mm()
  3890. {
  3891. move_menu_scale = 1.0;
  3892. lcd_move_menu_axis();
  3893. }
  3894. void EEPROM_save(int pos, uint8_t* value, uint8_t size)
  3895. {
  3896. do
  3897. {
  3898. eeprom_write_byte((unsigned char*)pos, *value);
  3899. pos++;
  3900. value++;
  3901. } while (--size);
  3902. }
  3903. void EEPROM_read(int pos, uint8_t* value, uint8_t size)
  3904. {
  3905. do
  3906. {
  3907. *value = eeprom_read_byte((unsigned char*)pos);
  3908. pos++;
  3909. value++;
  3910. } while (--size);
  3911. }
  3912. #ifdef SDCARD_SORT_ALPHA
  3913. static void lcd_sort_type_set() {
  3914. uint8_t sdSort;
  3915. EEPROM_read(EEPROM_SD_SORT, (uint8_t*)&sdSort, sizeof(sdSort));
  3916. switch (sdSort) {
  3917. case SD_SORT_TIME: sdSort = SD_SORT_ALPHA; break;
  3918. case SD_SORT_ALPHA: sdSort = SD_SORT_NONE; break;
  3919. default: sdSort = SD_SORT_TIME;
  3920. }
  3921. eeprom_update_byte((unsigned char *)EEPROM_SD_SORT, sdSort);
  3922. presort_flag = true;
  3923. }
  3924. #endif //SDCARD_SORT_ALPHA
  3925. #ifdef TMC2130
  3926. static void lcd_crash_mode_info()
  3927. {
  3928. lcd_update_enable(true);
  3929. static uint32_t tim = 0;
  3930. if ((tim + 1000) < _millis())
  3931. {
  3932. lcd_clear();
  3933. fputs_P(_i("Crash detection can\nbe turned on only in\nNormal mode"), lcdout);////MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
  3934. tim = _millis();
  3935. }
  3936. menu_back_if_clicked();
  3937. }
  3938. static void lcd_crash_mode_info2()
  3939. {
  3940. lcd_update_enable(true);
  3941. static uint32_t tim = 0;
  3942. if ((tim + 1000) < _millis())
  3943. {
  3944. lcd_clear();
  3945. fputs_P(_i("WARNING:\nCrash detection\ndisabled in\nStealth mode"), lcdout);////MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
  3946. tim = _millis();
  3947. }
  3948. menu_back_if_clicked();
  3949. }
  3950. #endif //TMC2130
  3951. #ifdef FILAMENT_SENSOR
  3952. static void lcd_filament_autoload_info()
  3953. {
  3954. uint8_t nlines;
  3955. lcd_update_enable(true);
  3956. static uint32_t tim = 0;
  3957. if ((tim + 1000) < _millis())
  3958. {
  3959. lcd_display_message_fullscreen_nonBlocking_P(_i("Autoloading filament available only when filament sensor is turned on..."), nlines); ////MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
  3960. tim = _millis();
  3961. }
  3962. menu_back_if_clicked();
  3963. }
  3964. static void lcd_fsensor_fail()
  3965. {
  3966. uint8_t nlines;
  3967. lcd_update_enable(true);
  3968. static uint32_t tim = 0;
  3969. if ((tim + 1000) < _millis())
  3970. {
  3971. lcd_display_message_fullscreen_nonBlocking_P(_i("ERROR: Filament sensor is not responding, please check connection."), nlines);////MSG_FSENS_NOT_RESPONDING c=20 r=4
  3972. tim = _millis();
  3973. }
  3974. menu_back_if_clicked();
  3975. }
  3976. #endif //FILAMENT_SENSOR
  3977. //-//
  3978. static void lcd_sound_state_set(void)
  3979. {
  3980. Sound_CycleState();
  3981. }
  3982. #ifndef MMU_FORCE_STEALTH_MODE
  3983. static void lcd_silent_mode_mmu_set() {
  3984. if (SilentModeMenu_MMU == 1) SilentModeMenu_MMU = 0;
  3985. else SilentModeMenu_MMU = 1;
  3986. //saving to eeprom is done in mmu_loop() after mmu actually switches state and confirms with "ok"
  3987. }
  3988. #endif //MMU_FORCE_STEALTH_MODE
  3989. static void lcd_silent_mode_set() {
  3990. switch (SilentModeMenu) {
  3991. #ifdef TMC2130
  3992. case SILENT_MODE_NORMAL: SilentModeMenu = SILENT_MODE_STEALTH; break;
  3993. case SILENT_MODE_STEALTH: SilentModeMenu = SILENT_MODE_NORMAL; break;
  3994. default: SilentModeMenu = SILENT_MODE_NORMAL; break; // (probably) not needed
  3995. #else
  3996. case SILENT_MODE_POWER: SilentModeMenu = SILENT_MODE_SILENT; break;
  3997. case SILENT_MODE_SILENT: SilentModeMenu = SILENT_MODE_AUTO; break;
  3998. case SILENT_MODE_AUTO: SilentModeMenu = SILENT_MODE_POWER; break;
  3999. default: SilentModeMenu = SILENT_MODE_POWER; break; // (probably) not needed
  4000. #endif //TMC2130
  4001. }
  4002. eeprom_update_byte((unsigned char *)EEPROM_SILENT, SilentModeMenu);
  4003. #ifdef TMC2130
  4004. lcd_display_message_fullscreen_P(_i("Mode change in progress ..."));
  4005. // Wait until the planner queue is drained and the stepper routine achieves
  4006. // an idle state.
  4007. st_synchronize();
  4008. if (tmc2130_wait_standstill_xy(1000)) {}
  4009. // MYSERIAL.print("standstill OK");
  4010. // else
  4011. // MYSERIAL.print("standstill NG!");
  4012. cli();
  4013. tmc2130_mode = (SilentModeMenu != SILENT_MODE_NORMAL)?TMC2130_MODE_SILENT:TMC2130_MODE_NORMAL;
  4014. update_mode_profile();
  4015. tmc2130_init();
  4016. // We may have missed a stepper timer interrupt due to the time spent in tmc2130_init.
  4017. // Be safe than sorry, reset the stepper timer before re-enabling interrupts.
  4018. st_reset_timer();
  4019. sei();
  4020. #endif //TMC2130
  4021. st_current_init();
  4022. #ifdef TMC2130
  4023. if (lcd_crash_detect_enabled() && (SilentModeMenu != SILENT_MODE_NORMAL))
  4024. menu_submenu(lcd_crash_mode_info2);
  4025. lcd_encoder_diff=0; // reset 'encoder buffer'
  4026. #endif //TMC2130
  4027. }
  4028. #ifdef TMC2130
  4029. static void crash_mode_switch()
  4030. {
  4031. if (lcd_crash_detect_enabled())
  4032. {
  4033. lcd_crash_detect_disable();
  4034. }
  4035. else
  4036. {
  4037. lcd_crash_detect_enable();
  4038. }
  4039. if (IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LcdCommands::Layer1Cal)) menu_goto(lcd_tune_menu, 9, true, true);
  4040. else menu_goto(lcd_settings_menu, 9, true, true);
  4041. }
  4042. #endif //TMC2130
  4043. #ifdef FILAMENT_SENSOR
  4044. static void lcd_fsensor_state_set()
  4045. {
  4046. FSensorStateMenu = !FSensorStateMenu; //set also from fsensor_enable() and fsensor_disable()
  4047. if (!FSensorStateMenu) {
  4048. fsensor_disable();
  4049. if (fsensor_autoload_enabled && !mmu_enabled)
  4050. menu_submenu(lcd_filament_autoload_info);
  4051. }
  4052. else {
  4053. fsensor_enable();
  4054. if (fsensor_not_responding && !mmu_enabled)
  4055. menu_submenu(lcd_fsensor_fail);
  4056. }
  4057. }
  4058. #endif //FILAMENT_SENSOR
  4059. #if !SDSORT_USES_RAM
  4060. void lcd_set_degree() {
  4061. lcd_set_custom_characters_degree();
  4062. }
  4063. void lcd_set_progress() {
  4064. lcd_set_custom_characters_progress();
  4065. }
  4066. #endif
  4067. #if (LANG_MODE != 0)
  4068. void menu_setlang(unsigned char lang)
  4069. {
  4070. if (!lang_select(lang))
  4071. {
  4072. if (lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Copy selected language?"), false, true))
  4073. lang_boot_update_start(lang);
  4074. lcd_update_enable(true);
  4075. lcd_clear();
  4076. menu_goto(lcd_language_menu, 0, true, true);
  4077. lcd_timeoutToStatus.stop(); //infinite timeout
  4078. lcd_draw_update = 2;
  4079. }
  4080. }
  4081. static void lcd_language_menu()
  4082. {
  4083. MENU_BEGIN();
  4084. if (lang_is_selected()) MENU_ITEM_BACK_P(_T(MSG_SETTINGS)); //
  4085. if (menu_item_text_P(lang_get_name_by_code(lang_get_code(0)))) //primary language
  4086. {
  4087. menu_setlang(0);
  4088. return;
  4089. }
  4090. uint8_t cnt = lang_get_count();
  4091. #ifdef W25X20CL
  4092. if (cnt == 2) //display secondary language in case of clear xflash
  4093. {
  4094. if (menu_item_text_P(lang_get_name_by_code(lang_get_code(1))))
  4095. {
  4096. menu_setlang(1);
  4097. return;
  4098. }
  4099. }
  4100. else
  4101. for (int i = 2; i < cnt; i++) //skip seconday language - solved in lang_select (MK3)
  4102. #else //W25X20CL
  4103. for (int i = 1; i < cnt; i++) //all seconday languages (MK2/25)
  4104. #endif //W25X20CL
  4105. if (menu_item_text_P(lang_get_name_by_code(lang_get_code(i))))
  4106. {
  4107. menu_setlang(i);
  4108. return;
  4109. }
  4110. MENU_END();
  4111. }
  4112. #endif //(LANG_MODE != 0)
  4113. void lcd_mesh_bedleveling()
  4114. {
  4115. mesh_bed_run_from_menu = true;
  4116. enquecommand_P(PSTR("G80"));
  4117. lcd_return_to_status();
  4118. }
  4119. void lcd_mesh_calibration()
  4120. {
  4121. enquecommand_P(PSTR("M45"));
  4122. lcd_return_to_status();
  4123. }
  4124. void lcd_mesh_calibration_z()
  4125. {
  4126. enquecommand_P(PSTR("M45 Z"));
  4127. lcd_return_to_status();
  4128. }
  4129. void lcd_pinda_calibration_menu()
  4130. {
  4131. MENU_BEGIN();
  4132. MENU_ITEM_BACK_P(_T(MSG_MENU_CALIBRATION));
  4133. MENU_ITEM_SUBMENU_P(_i("Calibrate"), lcd_calibrate_pinda);////MSG_CALIBRATE_PINDA c=17 r=1
  4134. MENU_END();
  4135. }
  4136. void lcd_temp_calibration_set() {
  4137. bool temp_cal_active = eeprom_read_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE);
  4138. temp_cal_active = !temp_cal_active;
  4139. eeprom_update_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE, temp_cal_active);
  4140. }
  4141. #ifdef HAS_SECOND_SERIAL_PORT
  4142. void lcd_second_serial_set() {
  4143. if(selectedSerialPort == 1) selectedSerialPort = 0;
  4144. else selectedSerialPort = 1;
  4145. eeprom_update_byte((unsigned char *)EEPROM_SECOND_SERIAL_ACTIVE, selectedSerialPort);
  4146. MYSERIAL.begin(BAUDRATE);
  4147. }
  4148. #endif //HAS_SECOND_SERIAL_PORT
  4149. void lcd_calibrate_pinda() {
  4150. enquecommand_P(PSTR("G76"));
  4151. lcd_return_to_status();
  4152. }
  4153. #ifndef SNMM
  4154. /*void lcd_calibrate_extruder() {
  4155. if (degHotend0() > EXTRUDE_MINTEMP)
  4156. {
  4157. current_position[E_AXIS] = 0; //set initial position to zero
  4158. plan_set_e_position(current_position[E_AXIS]);
  4159. //long steps_start = st_get_position(E_AXIS);
  4160. long steps_final;
  4161. float e_steps_per_unit;
  4162. float feedrate = (180 / axis_steps_per_unit[E_AXIS]) * 1; //3 //initial automatic extrusion feedrate (depends on current value of axis_steps_per_unit to avoid too fast extrusion)
  4163. float e_shift_calibration = (axis_steps_per_unit[E_AXIS] > 180 ) ? ((180 / axis_steps_per_unit[E_AXIS]) * 70): 70; //length of initial automatic extrusion sequence
  4164. const char *msg_e_cal_knob = _i("Rotate knob until mark reaches extruder body. Click when done.");////MSG_E_CAL_KNOB c=20 r=8
  4165. const char *msg_next_e_cal_knob = lcd_display_message_fullscreen_P(msg_e_cal_knob);
  4166. const bool multi_screen = msg_next_e_cal_knob != NULL;
  4167. unsigned long msg_millis;
  4168. lcd_show_fullscreen_message_and_wait_P(_i("Mark filament 100mm from extruder body. Click when done."));////MSG_MARK_FIL c=20 r=8
  4169. lcd_clear();
  4170. lcd_set_cursor(0, 1); lcd_puts_P(_T(MSG_PLEASE_WAIT));
  4171. current_position[E_AXIS] += e_shift_calibration;
  4172. plan_buffer_line_curposXYZE(feedrate, active_extruder);
  4173. st_synchronize();
  4174. lcd_display_message_fullscreen_P(msg_e_cal_knob);
  4175. msg_millis = _millis();
  4176. while (!LCD_CLICKED) {
  4177. if (multi_screen && _millis() - msg_millis > 5000) {
  4178. if (msg_next_e_cal_knob == NULL)
  4179. msg_next_e_cal_knob = msg_e_cal_knob;
  4180. msg_next_e_cal_knob = lcd_display_message_fullscreen_P(msg_next_e_cal_knob);
  4181. msg_millis = _millis();
  4182. }
  4183. //manage_inactivity(true);
  4184. manage_heater();
  4185. if (abs(lcd_encoder_diff) >= ENCODER_PULSES_PER_STEP) { //adjusting mark by knob rotation
  4186. delay_keep_alive(50);
  4187. //previous_millis_cmd = _millis();
  4188. lcd_encoder += (lcd_encoder_diff / ENCODER_PULSES_PER_STEP);
  4189. lcd_encoder_diff = 0;
  4190. if (!planner_queue_full()) {
  4191. current_position[E_AXIS] += float(abs((int)lcd_encoder)) * 0.01; //0.05
  4192. lcd_encoder = 0;
  4193. plan_buffer_line_curposXYZE(feedrate, active_extruder);
  4194. }
  4195. }
  4196. }
  4197. steps_final = current_position[E_AXIS] * axis_steps_per_unit[E_AXIS];
  4198. //steps_final = st_get_position(E_AXIS);
  4199. lcd_draw_update = 1;
  4200. e_steps_per_unit = ((float)(steps_final)) / 100.0f;
  4201. if (e_steps_per_unit < MIN_E_STEPS_PER_UNIT) e_steps_per_unit = MIN_E_STEPS_PER_UNIT;
  4202. if (e_steps_per_unit > MAX_E_STEPS_PER_UNIT) e_steps_per_unit = MAX_E_STEPS_PER_UNIT;
  4203. lcd_clear();
  4204. axis_steps_per_unit[E_AXIS] = e_steps_per_unit;
  4205. enquecommand_P(PSTR("M500")); //store settings to eeprom
  4206. //lcd_drawedit(PSTR("Result"), ftostr31(axis_steps_per_unit[E_AXIS]));
  4207. //delay_keep_alive(2000);
  4208. delay_keep_alive(500);
  4209. lcd_show_fullscreen_message_and_wait_P(_i("E calibration finished. Please clean the nozzle. Click when done."));////MSG_CLEAN_NOZZLE_E c=20 r=8
  4210. lcd_update_enable(true);
  4211. lcd_draw_update = 2;
  4212. }
  4213. else
  4214. {
  4215. show_preheat_nozzle_warning();
  4216. }
  4217. lcd_return_to_status();
  4218. }
  4219. void lcd_extr_cal_reset() {
  4220. float tmp1[] = DEFAULT_AXIS_STEPS_PER_UNIT;
  4221. axis_steps_per_unit[E_AXIS] = tmp1[3];
  4222. //extrudemultiply = 100;
  4223. enquecommand_P(PSTR("M500"));
  4224. }*/
  4225. #endif
  4226. void lcd_toshiba_flash_air_compatibility_toggle()
  4227. {
  4228. card.ToshibaFlashAir_enable(! card.ToshibaFlashAir_isEnabled());
  4229. eeprom_update_byte((uint8_t*)EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY, card.ToshibaFlashAir_isEnabled());
  4230. }
  4231. //! @brief Continue first layer calibration with previous value or start from zero?
  4232. //!
  4233. //! @code{.unparsed}
  4234. //! |01234567890123456789|
  4235. //! |Sheet Smooth1 actual| c=a, c=b, a+b = 13
  4236. //! |Z offset: -1.480 mm | c=a, c=b, a+b = 14
  4237. //! |>Continue | c=19
  4238. //! | Start from zero | c=19
  4239. //! ----------------------
  4240. //! @endcode
  4241. void lcd_first_layer_calibration_reset()
  4242. {
  4243. typedef struct
  4244. {
  4245. bool reset;
  4246. } MenuData;
  4247. static_assert(sizeof(menu_data)>= sizeof(MenuData),"_menu_data_t doesn't fit into menu_data");
  4248. MenuData* menuData = (MenuData*)&(menu_data[0]);
  4249. if(LCD_CLICKED || !eeprom_is_sheet_initialized(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet))) ||
  4250. (calibration_status() >= CALIBRATION_STATUS_LIVE_ADJUST) ||
  4251. (0 == static_cast<int16_t>(eeprom_read_word(reinterpret_cast<uint16_t*>
  4252. (&EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset)))))
  4253. {
  4254. if (menuData->reset)
  4255. {
  4256. eeprom_update_word(reinterpret_cast<uint16_t*>(&EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset), 0xffff);
  4257. }
  4258. menu_goto(lcd_v2_calibration,0,true,true);
  4259. }
  4260. if (lcd_encoder > 0)
  4261. {
  4262. menuData->reset = true;
  4263. lcd_encoder = 1;
  4264. }
  4265. else if (lcd_encoder < 1)
  4266. {
  4267. menuData->reset = false;
  4268. lcd_encoder = 0;
  4269. }
  4270. char sheet_name[sizeof(Sheet::name)];
  4271. eeprom_read_block(sheet_name, &EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].name, sizeof(Sheet::name));
  4272. lcd_set_cursor(0, 0);
  4273. float offset = static_cast<int16_t>(eeprom_read_word(reinterpret_cast<uint16_t*>(&EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset)))/cs.axis_steps_per_unit[Z_AXIS];
  4274. lcd_printf_P(_i("Sheet %.7s\nZ offset: %+1.3f mm\n%cContinue\n%cStart from zero"), //// \n denotes line break, %.7s is replaced by 7 character long sheet name, %+1.3f is replaced by 6 character long floating point number, %c is replaced by > or white space (one character) based on whether first or second option is selected. % denoted place holders can not be reordered. r=4
  4275. sheet_name, offset, menuData->reset ? ' ' : '>', menuData->reset ? '>' : ' ');
  4276. }
  4277. void lcd_v2_calibration()
  4278. {
  4279. if (mmu_enabled)
  4280. {
  4281. const uint8_t filament = choose_menu_P(
  4282. _i("Select filament:"), ////c=20 r=1
  4283. _T(MSG_FILAMENT),_i("Cancel")); ////c=19 r=1
  4284. if (filament < 5)
  4285. {
  4286. lay1cal_filament = filament;
  4287. }
  4288. else
  4289. {
  4290. menu_back();
  4291. return;
  4292. }
  4293. }
  4294. else if (!eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE))
  4295. {
  4296. bool loaded = false;
  4297. if (fsensor_enabled && ir_sensor_detected)
  4298. {
  4299. loaded = (digitalRead(IR_SENSOR_PIN) == 0);
  4300. }
  4301. else
  4302. {
  4303. loaded = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Is filament loaded?"), false, true);////MSG_PLA_FILAMENT_LOADED c=20 r=2
  4304. lcd_update_enabled = true;
  4305. }
  4306. if (!loaded)
  4307. {
  4308. lcd_display_message_fullscreen_P(_i("Please load filament first."));////MSG_PLEASE_LOAD_PLA c=20 r=4
  4309. lcd_consume_click();
  4310. for (uint_least8_t i = 0; i < 20; i++) { //wait max. 2s
  4311. delay_keep_alive(100);
  4312. if (lcd_clicked()) {
  4313. break;
  4314. }
  4315. }
  4316. lcd_update_enabled = true;
  4317. menu_back();
  4318. return;
  4319. }
  4320. }
  4321. eFilamentAction = FilamentAction::Lay1Cal;
  4322. menu_goto(lcd_generic_preheat_menu, 0, true, true);
  4323. }
  4324. void lcd_wizard() {
  4325. bool result = true;
  4326. if (calibration_status() != CALIBRATION_STATUS_ASSEMBLED) {
  4327. result = lcd_show_multiscreen_message_yes_no_and_wait_P(_i("Running Wizard will delete current calibration results and start from the beginning. Continue?"), false, false);////MSG_WIZARD_RERUN c=20 r=7
  4328. }
  4329. if (result) {
  4330. calibration_status_store(CALIBRATION_STATUS_ASSEMBLED);
  4331. lcd_wizard(WizState::Run);
  4332. }
  4333. else {
  4334. lcd_return_to_status();
  4335. lcd_update_enable(true);
  4336. lcd_update(2);
  4337. }
  4338. }
  4339. #if (LANG_MODE != 0)
  4340. void lcd_language()
  4341. {
  4342. lcd_update_enable(true);
  4343. lcd_clear();
  4344. menu_goto(lcd_language_menu, 0, true, true);
  4345. lcd_timeoutToStatus.stop(); //infinite timeout
  4346. lcd_draw_update = 2;
  4347. while ((menu_menu != lcd_status_screen) && (!lang_is_selected()))
  4348. {
  4349. _delay(50);
  4350. lcd_update(0);
  4351. manage_heater();
  4352. manage_inactivity(true);
  4353. }
  4354. if (lang_is_selected())
  4355. lcd_return_to_status();
  4356. else
  4357. lang_select(LANG_ID_PRI);
  4358. }
  4359. #endif
  4360. static void wait_preheat()
  4361. {
  4362. current_position[Z_AXIS] = 100; //move in z axis to make space for loading filament
  4363. plan_buffer_line_curposXYZE(homing_feedrate[Z_AXIS] / 60);
  4364. delay_keep_alive(2000);
  4365. lcd_display_message_fullscreen_P(_T(MSG_WIZARD_HEATING));
  4366. lcd_set_custom_characters();
  4367. while (abs(degHotend(0) - degTargetHotend(0)) > 3) {
  4368. lcd_display_message_fullscreen_P(_T(MSG_WIZARD_HEATING));
  4369. lcd_set_cursor(0, 4);
  4370. //Print the hotend temperature (9 chars total)
  4371. lcdui_print_temp(LCD_STR_THERMOMETER[0], (int)(degHotend(0) + 0.5), (int)(degTargetHotend(0) + 0.5));
  4372. delay_keep_alive(1000);
  4373. }
  4374. }
  4375. static void lcd_wizard_load()
  4376. {
  4377. if (mmu_enabled)
  4378. {
  4379. lcd_show_fullscreen_message_and_wait_P(_i("Please insert filament into the first tube of the MMU, then press the knob to load it."));////c=20 r=8
  4380. tmp_extruder = 0;
  4381. }
  4382. else
  4383. {
  4384. lcd_show_fullscreen_message_and_wait_P(_i("Please insert filament into the extruder, then press the knob to load it."));////MSG_WIZARD_LOAD_FILAMENT c=20 r=8
  4385. }
  4386. lcd_update_enable(false);
  4387. lcd_clear();
  4388. lcd_puts_at_P(0, 2, _T(MSG_LOADING_FILAMENT));
  4389. #ifdef SNMM
  4390. change_extr(0);
  4391. #endif
  4392. loading_flag = true;
  4393. gcode_M701();
  4394. }
  4395. bool lcd_autoDepleteEnabled()
  4396. {
  4397. return (lcd_autoDeplete && fsensor_enabled);
  4398. }
  4399. static void wizard_lay1cal_message(bool cold)
  4400. {
  4401. lcd_show_fullscreen_message_and_wait_P(
  4402. _i("Now I will calibrate distance between tip of the nozzle and heatbed surface.")); ////MSG_WIZARD_V2_CAL c=20 r=8
  4403. if (mmu_enabled)
  4404. {
  4405. lcd_show_fullscreen_message_and_wait_P(
  4406. _i("Choose a filament for the First Layer Calibration and select it in the on-screen menu."));
  4407. }
  4408. else if (cold)
  4409. {
  4410. lcd_show_fullscreen_message_and_wait_P(
  4411. _i("Select temperature which matches your material."));
  4412. }
  4413. lcd_show_fullscreen_message_and_wait_P(
  4414. _i("The printer will start printing a zig-zag line. Rotate the knob until you reach the optimal height. Check the pictures in the handbook (Calibration chapter).")); ////MSG_WIZARD_V2_CAL_2 c=20 r=12
  4415. }
  4416. //! @brief Printer first run wizard (Selftest and calibration)
  4417. //!
  4418. //!
  4419. //! First layer calibration with MMU state diagram
  4420. //!
  4421. //! @startuml
  4422. //! [*] --> IsFil
  4423. //! IsFil : Is any filament loaded?
  4424. //! LoadFilCold : Push the button to start loading Filament 1
  4425. //!
  4426. //! IsFil --> Lay1CalCold : yes
  4427. //! IsFil --> LoadFilCold : no
  4428. //! LoadFilCold --> Lay1CalCold : click
  4429. //! @enduml
  4430. //!
  4431. //! First layer calibration without MMU state diagram
  4432. //!
  4433. //! @startuml
  4434. //! [*] --> IsFil
  4435. //! IsFil : Is filament loaded?
  4436. //! Preheat : Select nozle temperature which matches your material.
  4437. //! LoadFilHot : Insert filament to extruder and press the knob.
  4438. //!
  4439. //! IsFil --> Lay1CalCold : yes
  4440. //! IsFil --> Preheat : no
  4441. //! Preheat --> LoadFilHot : select
  4442. //! LoadFilHot --> Lay1CalHot : click
  4443. //! @enduml
  4444. //!
  4445. //! @param state Entry point of the wizard
  4446. //!
  4447. //! state | description
  4448. //! ---------------------- | ----------------
  4449. //! WizState::Run | Main entry point
  4450. //! WizState::RepeatLay1Cal | Entry point after passing 1st layer calibration
  4451. //! WizState::LoadFilHot | Entry point after temporarily left for preheat before load filament
  4452. void lcd_wizard(WizState state)
  4453. {
  4454. using S = WizState;
  4455. bool end = false;
  4456. int wizard_event;
  4457. const char *msg = NULL;
  4458. // Make sure EEPROM_WIZARD_ACTIVE is true if entering using different entry point
  4459. // other than WizState::Run - it is useful for debugging wizard.
  4460. if (state != S::Run) eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 1);
  4461. FORCE_BL_ON_START;
  4462. while (!end) {
  4463. printf_P(PSTR("Wizard state: %d\n"), state);
  4464. switch (state) {
  4465. case S::Run: //Run wizard?
  4466. // 2019-08-07 brutal hack - solving the "viper" situation.
  4467. // It is caused by the fact, that tmc2130_st_isr makes a crash detection before the printers really starts.
  4468. // And thus it calles stop_and_save_print_to_ram which sets the saved_printing flag.
  4469. // Having this flag set during normal printing is lethal - mesh_plan_buffer_line exist in the middle of planning long travels
  4470. // which results in distorted print.
  4471. // This primarily happens when the printer is new and parked in 0,0
  4472. // So any new printer will fail the first layer calibration unless being reset or the Stop function gets called.
  4473. // We really must find a way to prevent the crash from happening before the printer is started - that would be the correct solution.
  4474. // Btw. the flag may even trigger the viper situation on normal start this way and the user won't be able to find out why.
  4475. saved_printing = false;
  4476. wizard_event = lcd_show_multiscreen_message_yes_no_and_wait_P(_i("Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"), false, true);////MSG_WIZARD_WELCOME c=20 r=7
  4477. if (wizard_event) {
  4478. state = S::Restore;
  4479. eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 1);
  4480. }
  4481. else {
  4482. eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 0);
  4483. end = true;
  4484. }
  4485. break;
  4486. case S::Restore:
  4487. switch (calibration_status()) {
  4488. case CALIBRATION_STATUS_ASSEMBLED: state = S::Selftest; break; //run selftest
  4489. case CALIBRATION_STATUS_XYZ_CALIBRATION: state = S::Xyz; break; //run xyz cal.
  4490. case CALIBRATION_STATUS_Z_CALIBRATION: state = S::Z; break; //run z cal.
  4491. case CALIBRATION_STATUS_LIVE_ADJUST: state = S::IsFil; break; //run live adjust
  4492. case CALIBRATION_STATUS_CALIBRATED: end = true; eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 0); break;
  4493. default: state = S::Selftest; break; //if calibration status is unknown, run wizard from the beginning
  4494. }
  4495. break;
  4496. case S::Selftest:
  4497. lcd_show_fullscreen_message_and_wait_P(_i("First, I will run the selftest to check most common assembly problems."));////MSG_WIZARD_SELFTEST c=20 r=8
  4498. wizard_event = lcd_selftest();
  4499. if (wizard_event) {
  4500. calibration_status_store(CALIBRATION_STATUS_XYZ_CALIBRATION);
  4501. state = S::Xyz;
  4502. }
  4503. else end = true;
  4504. break;
  4505. case S::Xyz:
  4506. lcd_show_fullscreen_message_and_wait_P(_i("I will run xyz calibration now. It will take approx. 12 mins."));////MSG_WIZARD_XYZ_CAL c=20 r=8
  4507. wizard_event = gcode_M45(false, 0);
  4508. if (wizard_event) state = S::IsFil;
  4509. else end = true;
  4510. break;
  4511. case S::Z:
  4512. lcd_show_fullscreen_message_and_wait_P(_i("Please remove shipping helpers first."));
  4513. lcd_show_fullscreen_message_and_wait_P(_i("Now remove the test print from steel sheet."));
  4514. lcd_show_fullscreen_message_and_wait_P(_i("I will run z calibration now."));////MSG_WIZARD_Z_CAL c=20 r=8
  4515. wizard_event = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_STEEL_SHEET_CHECK), false, false);
  4516. if (!wizard_event) lcd_show_fullscreen_message_and_wait_P(_T(MSG_PLACE_STEEL_SHEET));
  4517. wizard_event = gcode_M45(true, 0);
  4518. if (wizard_event) {
  4519. //current filament needs to be unloaded and then new filament should be loaded
  4520. //start to preheat nozzle for unloading remaining PLA filament
  4521. setTargetHotend(PLA_PREHEAT_HOTEND_TEMP, 0);
  4522. lcd_display_message_fullscreen_P(_i("Now I will preheat nozzle for PLA."));
  4523. wait_preheat();
  4524. //unload current filament
  4525. unload_filament();
  4526. //load filament
  4527. lcd_wizard_load();
  4528. setTargetHotend(0, 0); //we are finished, cooldown nozzle
  4529. state = S::Finish; //shipped, no need to set first layer, go to final message directly
  4530. }
  4531. else end = true;
  4532. break;
  4533. case S::IsFil:
  4534. //start to preheat nozzle and bed to save some time later
  4535. setTargetHotend(PLA_PREHEAT_HOTEND_TEMP, 0);
  4536. setTargetBed(PLA_PREHEAT_HPB_TEMP);
  4537. if (mmu_enabled)
  4538. {
  4539. wizard_event = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Is filament loaded?"), true);////c=20 r=2
  4540. } else
  4541. {
  4542. wizard_event = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Is filament loaded?"), true);////MSG_WIZARD_FILAMENT_LOADED c=20 r=2
  4543. }
  4544. if (wizard_event) state = S::Lay1CalCold;
  4545. else
  4546. {
  4547. if(mmu_enabled) state = S::LoadFilCold;
  4548. else state = S::Preheat;
  4549. }
  4550. break;
  4551. case S::Preheat:
  4552. menu_goto(lcd_preheat_menu,0,false,true);
  4553. lcd_show_fullscreen_message_and_wait_P(_i("Select nozzle preheat temperature which matches your material."));
  4554. end = true; // Leave wizard temporarily for lcd_preheat_menu
  4555. break;
  4556. case S::LoadFilHot:
  4557. wait_preheat();
  4558. lcd_wizard_load();
  4559. state = S::Lay1CalHot;
  4560. break;
  4561. case S::LoadFilCold:
  4562. lcd_wizard_load();
  4563. state = S::Lay1CalCold;
  4564. break;
  4565. case S::Lay1CalCold:
  4566. wizard_lay1cal_message(true);
  4567. menu_goto(lcd_v2_calibration,0,false,true);
  4568. end = true; // Leave wizard temporarily for lcd_v2_calibration
  4569. break;
  4570. case S::Lay1CalHot:
  4571. wizard_lay1cal_message(false);
  4572. lcd_commands_type = LcdCommands::Layer1Cal;
  4573. end = true; // Leave wizard temporarily for lcd_v2_calibration
  4574. break;
  4575. case S::RepeatLay1Cal:
  4576. wizard_event = lcd_show_multiscreen_message_yes_no_and_wait_P(_i("Do you want to repeat last step to readjust distance between nozzle and heatbed?"), false);////MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
  4577. if (wizard_event)
  4578. {
  4579. lcd_show_fullscreen_message_and_wait_P(_i("Please clean heatbed and then press the knob."));////MSG_WIZARD_CLEAN_HEATBED c=20 r=8
  4580. state = S::Lay1CalCold;
  4581. }
  4582. else
  4583. {
  4584. lcd_show_fullscreen_message_and_wait_P(_i("If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets."));
  4585. state = S::Finish;
  4586. }
  4587. break;
  4588. case S::Finish:
  4589. eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 0);
  4590. end = true;
  4591. break;
  4592. default: break;
  4593. }
  4594. }
  4595. FORCE_BL_ON_END;
  4596. printf_P(_N("Wizard end state: %d\n"), state);
  4597. switch (state) { //final message
  4598. case S::Restore: //printer was already calibrated
  4599. msg = _T(MSG_WIZARD_DONE);
  4600. break;
  4601. case S::Selftest: //selftest
  4602. case S::Xyz: //xyz cal.
  4603. case S::Z: //z cal.
  4604. msg = _T(MSG_WIZARD_CALIBRATION_FAILED);
  4605. break;
  4606. case S::Finish: //we are finished
  4607. msg = _T(MSG_WIZARD_DONE);
  4608. lcd_reset_alert_level();
  4609. lcd_setstatuspgm(_T(WELCOME_MSG));
  4610. lcd_return_to_status();
  4611. break;
  4612. default:
  4613. msg = _T(MSG_WIZARD_QUIT);
  4614. break;
  4615. }
  4616. if (!((S::Lay1CalCold == state) || (S::Lay1CalHot == state) || (S::Preheat == state)))
  4617. {
  4618. lcd_show_fullscreen_message_and_wait_P(msg);
  4619. }
  4620. lcd_update_enable(true);
  4621. lcd_update(2);
  4622. }
  4623. #ifdef TMC2130
  4624. void lcd_settings_linearity_correction_menu(void)
  4625. {
  4626. MENU_BEGIN();
  4627. ON_MENU_LEAVE(
  4628. lcd_settings_linearity_correction_menu_save();
  4629. );
  4630. MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
  4631. #ifdef TMC2130_LINEARITY_CORRECTION_XYZ
  4632. //tmc2130_wave_fac[X_AXIS]
  4633. MENU_ITEM_EDIT_int3_P(_i("X-correct:"), &tmc2130_wave_fac[X_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_X_CORRECTION c=13
  4634. MENU_ITEM_EDIT_int3_P(_i("Y-correct:"), &tmc2130_wave_fac[Y_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_Y_CORRECTION c=13
  4635. MENU_ITEM_EDIT_int3_P(_i("Z-correct:"), &tmc2130_wave_fac[Z_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_Z_CORRECTION c=13
  4636. #endif //TMC2130_LINEARITY_CORRECTION_XYZ
  4637. MENU_ITEM_EDIT_int3_P(_i("E-correct:"), &tmc2130_wave_fac[E_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_EXTRUDER_CORRECTION c=13
  4638. MENU_END();
  4639. }
  4640. #endif // TMC2130
  4641. #ifdef FILAMENT_SENSOR
  4642. #define SETTINGS_FILAMENT_SENSOR \
  4643. do\
  4644. {\
  4645. if (FSensorStateMenu == 0)\
  4646. {\
  4647. if (fsensor_not_responding && (mmu_enabled == false))\
  4648. {\
  4649. /* Filament sensor not working*/\
  4650. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_NA), lcd_fsensor_state_set);/*////MSG_FSENSOR_NA*/\
  4651. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), NULL, lcd_fsensor_fail);\
  4652. }\
  4653. else\
  4654. {\
  4655. /* Filament sensor turned off, working, no problems*/\
  4656. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_OFF), lcd_fsensor_state_set);\
  4657. if (mmu_enabled == false)\
  4658. {\
  4659. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), NULL, lcd_filament_autoload_info);\
  4660. }\
  4661. }\
  4662. }\
  4663. else\
  4664. {\
  4665. /* Filament sensor turned on, working, no problems*/\
  4666. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_ON), lcd_fsensor_state_set);\
  4667. if (mmu_enabled == false)\
  4668. {\
  4669. if (fsensor_autoload_enabled)\
  4670. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), _T(MSG_ON), lcd_set_filament_autoload);/*////MSG_FSENS_AUTOLOAD_ON c=17 r=1*/\
  4671. else\
  4672. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), _T(MSG_OFF), lcd_set_filament_autoload);/*////MSG_FSENS_AUTOLOAD_OFF c=17 r=1*/\
  4673. /*if (fsensor_oq_meassure_enabled)*/\
  4674. /*MENU_ITEM_FUNCTION_P(_i("F. OQ meass. [on]"), lcd_set_filament_oq_meass);*//*////MSG_FSENS_OQMEASS_ON c=17 r=1*/\
  4675. /*else*/\
  4676. /*MENU_ITEM_FUNCTION_P(_i("F. OQ meass.[off]"), lcd_set_filament_oq_meass);*//*////MSG_FSENS_OQMEASS_OFF c=17 r=1*/\
  4677. }\
  4678. }\
  4679. }\
  4680. while(0)
  4681. #else //FILAMENT_SENSOR
  4682. #define SETTINGS_FILAMENT_SENSOR do{}while(0)
  4683. #endif //FILAMENT_SENSOR
  4684. static void auto_deplete_switch()
  4685. {
  4686. lcd_autoDeplete = !lcd_autoDeplete;
  4687. eeprom_update_byte((unsigned char *)EEPROM_AUTO_DEPLETE, lcd_autoDeplete);
  4688. }
  4689. static void settingsAutoDeplete()
  4690. {
  4691. if (mmu_enabled)
  4692. {
  4693. if (!fsensor_enabled)
  4694. {
  4695. MENU_ITEM_TOGGLE_P(_T(MSG_AUTO_DEPLETE), _T(MSG_NA), NULL);
  4696. }
  4697. else if (lcd_autoDeplete)
  4698. {
  4699. MENU_ITEM_TOGGLE_P(_T(MSG_AUTO_DEPLETE), _T(MSG_ON), auto_deplete_switch);
  4700. }
  4701. else
  4702. {
  4703. MENU_ITEM_TOGGLE_P(_T(MSG_AUTO_DEPLETE), _T(MSG_OFF), auto_deplete_switch);
  4704. }
  4705. }
  4706. }
  4707. #define SETTINGS_AUTO_DEPLETE \
  4708. do\
  4709. {\
  4710. settingsAutoDeplete();\
  4711. }\
  4712. while(0)\
  4713. #ifdef MMU_HAS_CUTTER
  4714. static void settingsCutter()
  4715. {
  4716. if (mmu_enabled)
  4717. {
  4718. if (EEPROM_MMU_CUTTER_ENABLED_enabled == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
  4719. {
  4720. MENU_ITEM_TOGGLE_P(_T(MSG_CUTTER), _T(MSG_ON), lcd_cutter_enabled);
  4721. }
  4722. #ifdef MMU_ALWAYS_CUT
  4723. else if (EEPROM_MMU_CUTTER_ENABLED_always == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
  4724. {
  4725. MENU_ITEM_TOGGLE_P(_T(MSG_CUTTER), _i("Always"), lcd_cutter_enabled);
  4726. }
  4727. #endif
  4728. else
  4729. {
  4730. MENU_ITEM_TOGGLE_P(_T(MSG_CUTTER), _T(MSG_OFF), lcd_cutter_enabled);
  4731. }
  4732. }
  4733. }
  4734. #define SETTINGS_CUTTER \
  4735. do\
  4736. {\
  4737. settingsCutter();\
  4738. }\
  4739. while(0)
  4740. #else
  4741. #define SETTINGS_CUTTER
  4742. #endif //MMU_HAS_CUTTER
  4743. #ifdef TMC2130
  4744. #define SETTINGS_SILENT_MODE \
  4745. do\
  4746. {\
  4747. if(!farm_mode)\
  4748. {\
  4749. if (SilentModeMenu == SILENT_MODE_NORMAL)\
  4750. {\
  4751. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_NORMAL), lcd_silent_mode_set);\
  4752. }\
  4753. else MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_STEALTH), lcd_silent_mode_set);\
  4754. if (SilentModeMenu == SILENT_MODE_NORMAL)\
  4755. {\
  4756. if (lcd_crash_detect_enabled()) MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_ON), crash_mode_switch);\
  4757. else MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_OFF), crash_mode_switch);\
  4758. }\
  4759. else MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), NULL, lcd_crash_mode_info);\
  4760. }\
  4761. }\
  4762. while (0)
  4763. #else //TMC2130
  4764. #define SETTINGS_SILENT_MODE \
  4765. do\
  4766. {\
  4767. if(!farm_mode)\
  4768. {\
  4769. switch (SilentModeMenu)\
  4770. {\
  4771. case SILENT_MODE_POWER:\
  4772. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set);\
  4773. break;\
  4774. case SILENT_MODE_SILENT:\
  4775. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_SILENT), lcd_silent_mode_set);\
  4776. break;\
  4777. case SILENT_MODE_AUTO:\
  4778. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_AUTO_POWER), lcd_silent_mode_set);\
  4779. break;\
  4780. default:\
  4781. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set);\
  4782. break; /* (probably) not needed*/\
  4783. }\
  4784. }\
  4785. }\
  4786. while (0)
  4787. #endif //TMC2130
  4788. #ifndef MMU_FORCE_STEALTH_MODE
  4789. #define SETTINGS_MMU_MODE \
  4790. do\
  4791. {\
  4792. if (mmu_enabled)\
  4793. {\
  4794. if (SilentModeMenu_MMU == 0) MENU_ITEM_TOGGLE_P(_T(MSG_MMU_MODE), _T(MSG_NORMAL), lcd_silent_mode_mmu_set);\
  4795. else MENU_ITEM_TOGGLE_P(_T(MSG_MMU_MODE), _T(MSG_STEALTH), lcd_silent_mode_mmu_set);\
  4796. }\
  4797. }\
  4798. while (0)
  4799. #else //MMU_FORCE_STEALTH_MODE
  4800. #define SETTINGS_MMU_MODE
  4801. #endif //MMU_FORCE_STEALTH_MODE
  4802. #ifdef SDCARD_SORT_ALPHA
  4803. #define SETTINGS_SD \
  4804. do\
  4805. {\
  4806. if (card.ToshibaFlashAir_isEnabled())\
  4807. MENU_ITEM_TOGGLE_P(_T(MSG_SD_CARD), _T(MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY), lcd_toshiba_flash_air_compatibility_toggle);\
  4808. else\
  4809. MENU_ITEM_TOGGLE_P(_T(MSG_SD_CARD), _T(MSG_NORMAL), lcd_toshiba_flash_air_compatibility_toggle);\
  4810. \
  4811. if (!farm_mode)\
  4812. {\
  4813. uint8_t sdSort;\
  4814. EEPROM_read(EEPROM_SD_SORT, (uint8_t*)&sdSort, sizeof(sdSort));\
  4815. switch (sdSort)\
  4816. {\
  4817. case SD_SORT_TIME: MENU_ITEM_TOGGLE_P(_T(MSG_SORT), _T(MSG_SORT_TIME), lcd_sort_type_set); break;\
  4818. case SD_SORT_ALPHA: MENU_ITEM_TOGGLE_P(_T(MSG_SORT), _T(MSG_SORT_ALPHA), lcd_sort_type_set); break;\
  4819. default: MENU_ITEM_TOGGLE_P(_T(MSG_SORT), _T(MSG_NONE), lcd_sort_type_set);\
  4820. }\
  4821. }\
  4822. }\
  4823. while (0)
  4824. #else // SDCARD_SORT_ALPHA
  4825. #define SETTINGS_SD \
  4826. do\
  4827. {\
  4828. if (card.ToshibaFlashAir_isEnabled())\
  4829. MENU_ITEM_TOGGLE_P(_T(MSG_SD_CARD), _T(MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY), lcd_toshiba_flash_air_compatibility_toggle);\
  4830. else\
  4831. MENU_ITEM_TOGGLE_P(_T(MSG_SD_CARD), _T(MSG_NORMAL), lcd_toshiba_flash_air_compatibility_toggle);\
  4832. }\
  4833. while (0)
  4834. #endif // SDCARD_SORT_ALPHA
  4835. /*
  4836. #define SETTINGS_MBL_MODE \
  4837. do\
  4838. {\
  4839. switch(e_mbl_type)\
  4840. {\
  4841. case e_MBL_FAST:\
  4842. MENU_ITEM_FUNCTION_P(_i("Mode [Fast]"),mbl_mode_set);\
  4843. break; \
  4844. case e_MBL_OPTIMAL:\
  4845. MENU_ITEM_FUNCTION_P(_i("Mode [Optimal]"), mbl_mode_set); \
  4846. break; \
  4847. case e_MBL_PREC:\
  4848. MENU_ITEM_FUNCTION_P(_i("Mode [Precise]"), mbl_mode_set); \
  4849. break; \
  4850. default:\
  4851. MENU_ITEM_FUNCTION_P(_i("Mode [Optimal]"), mbl_mode_set); \
  4852. break; \
  4853. }\
  4854. }\
  4855. while (0)
  4856. */
  4857. #define SETTINGS_SOUND \
  4858. do\
  4859. {\
  4860. switch(eSoundMode)\
  4861. {\
  4862. case e_SOUND_MODE_LOUD:\
  4863. MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SOUND_LOUD), lcd_sound_state_set);\
  4864. break;\
  4865. case e_SOUND_MODE_ONCE:\
  4866. MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SOUND_ONCE), lcd_sound_state_set);\
  4867. break;\
  4868. case e_SOUND_MODE_SILENT:\
  4869. MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SILENT), lcd_sound_state_set);\
  4870. break;\
  4871. case e_SOUND_MODE_BLIND:\
  4872. MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SOUND_BLIND), lcd_sound_state_set);\
  4873. break;\
  4874. default:\
  4875. MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SOUND_LOUD), lcd_sound_state_set);\
  4876. }\
  4877. }\
  4878. while (0)
  4879. //-//
  4880. static void lcd_check_mode_set(void)
  4881. {
  4882. switch(oCheckMode)
  4883. {
  4884. case ClCheckMode::_None:
  4885. oCheckMode=ClCheckMode::_Warn;
  4886. break;
  4887. case ClCheckMode::_Warn:
  4888. oCheckMode=ClCheckMode::_Strict;
  4889. break;
  4890. case ClCheckMode::_Strict:
  4891. oCheckMode=ClCheckMode::_None;
  4892. break;
  4893. default:
  4894. oCheckMode=ClCheckMode::_None;
  4895. }
  4896. eeprom_update_byte((uint8_t*)EEPROM_CHECK_MODE,(uint8_t)oCheckMode);
  4897. }
  4898. #define SETTINGS_MODE \
  4899. do\
  4900. {\
  4901. switch(oCheckMode)\
  4902. {\
  4903. case ClCheckMode::_None:\
  4904. MENU_ITEM_TOGGLE_P(_T(MSG_NOZZLE), _T(MSG_NONE), lcd_check_mode_set);\
  4905. break;\
  4906. case ClCheckMode::_Warn:\
  4907. MENU_ITEM_TOGGLE_P(_T(MSG_NOZZLE), _T(MSG_WARN), lcd_check_mode_set);\
  4908. break;\
  4909. case ClCheckMode::_Strict:\
  4910. MENU_ITEM_TOGGLE_P(_T(MSG_NOZZLE), _T(MSG_STRICT), lcd_check_mode_set);\
  4911. break;\
  4912. default:\
  4913. MENU_ITEM_TOGGLE_P(_T(MSG_NOZZLE), _T(MSG_NONE), lcd_check_mode_set);\
  4914. }\
  4915. }\
  4916. while (0)
  4917. static void lcd_nozzle_diameter_set(void)
  4918. {
  4919. uint16_t nDiameter;
  4920. switch(oNozzleDiameter)
  4921. {
  4922. case ClNozzleDiameter::_Diameter_250:
  4923. oNozzleDiameter=ClNozzleDiameter::_Diameter_400;
  4924. nDiameter=400;
  4925. break;
  4926. case ClNozzleDiameter::_Diameter_400:
  4927. oNozzleDiameter=ClNozzleDiameter::_Diameter_600;
  4928. nDiameter=600;
  4929. break;
  4930. case ClNozzleDiameter::_Diameter_600:
  4931. oNozzleDiameter=ClNozzleDiameter::_Diameter_250;
  4932. nDiameter=250;
  4933. break;
  4934. default:
  4935. oNozzleDiameter=ClNozzleDiameter::_Diameter_400;
  4936. nDiameter=400;
  4937. }
  4938. eeprom_update_byte((uint8_t*)EEPROM_NOZZLE_DIAMETER,(uint8_t)oNozzleDiameter);
  4939. eeprom_update_word((uint16_t*)EEPROM_NOZZLE_DIAMETER_uM,nDiameter);
  4940. }
  4941. #define SETTINGS_NOZZLE \
  4942. do\
  4943. {\
  4944. float fNozzleDiam;\
  4945. switch(oNozzleDiameter)\
  4946. {\
  4947. case ClNozzleDiameter::_Diameter_250: fNozzleDiam = 0.25f; break;\
  4948. case ClNozzleDiameter::_Diameter_400: fNozzleDiam = 0.4f; break;\
  4949. case ClNozzleDiameter::_Diameter_600: fNozzleDiam = 0.6f; break;\
  4950. default: fNozzleDiam = 0.4f; break;\
  4951. }\
  4952. MENU_ITEM_TOGGLE(_T(MSG_NOZZLE_DIAMETER), ftostr12ns(fNozzleDiam), lcd_nozzle_diameter_set);\
  4953. }\
  4954. while (0)
  4955. static void lcd_check_model_set(void)
  4956. {
  4957. switch(oCheckModel)
  4958. {
  4959. case ClCheckModel::_None:
  4960. oCheckModel=ClCheckModel::_Warn;
  4961. break;
  4962. case ClCheckModel::_Warn:
  4963. oCheckModel=ClCheckModel::_Strict;
  4964. break;
  4965. case ClCheckModel::_Strict:
  4966. oCheckModel=ClCheckModel::_None;
  4967. break;
  4968. default:
  4969. oCheckModel=ClCheckModel::_None;
  4970. }
  4971. eeprom_update_byte((uint8_t*)EEPROM_CHECK_MODEL,(uint8_t)oCheckModel);
  4972. }
  4973. #define SETTINGS_MODEL \
  4974. do\
  4975. {\
  4976. switch(oCheckModel)\
  4977. {\
  4978. case ClCheckModel::_None:\
  4979. MENU_ITEM_TOGGLE_P(_T(MSG_MODEL), _T(MSG_NONE), lcd_check_model_set);\
  4980. break;\
  4981. case ClCheckModel::_Warn:\
  4982. MENU_ITEM_TOGGLE_P(_T(MSG_MODEL), _T(MSG_WARN), lcd_check_model_set);\
  4983. break;\
  4984. case ClCheckModel::_Strict:\
  4985. MENU_ITEM_TOGGLE_P(_T(MSG_MODEL), _T(MSG_STRICT), lcd_check_model_set);\
  4986. break;\
  4987. default:\
  4988. MENU_ITEM_TOGGLE_P(_T(MSG_MODEL), _T(MSG_NONE), lcd_check_model_set);\
  4989. }\
  4990. }\
  4991. while (0)
  4992. static void lcd_check_version_set(void)
  4993. {
  4994. switch(oCheckVersion)
  4995. {
  4996. case ClCheckVersion::_None:
  4997. oCheckVersion=ClCheckVersion::_Warn;
  4998. break;
  4999. case ClCheckVersion::_Warn:
  5000. oCheckVersion=ClCheckVersion::_Strict;
  5001. break;
  5002. case ClCheckVersion::_Strict:
  5003. oCheckVersion=ClCheckVersion::_None;
  5004. break;
  5005. default:
  5006. oCheckVersion=ClCheckVersion::_None;
  5007. }
  5008. eeprom_update_byte((uint8_t*)EEPROM_CHECK_VERSION,(uint8_t)oCheckVersion);
  5009. }
  5010. #define SETTINGS_VERSION \
  5011. do\
  5012. {\
  5013. switch(oCheckVersion)\
  5014. {\
  5015. case ClCheckVersion::_None:\
  5016. MENU_ITEM_TOGGLE_P(_T(MSG_FIRMWARE), _T(MSG_NONE), lcd_check_version_set);\
  5017. break;\
  5018. case ClCheckVersion::_Warn:\
  5019. MENU_ITEM_TOGGLE_P(_T(MSG_FIRMWARE), _T(MSG_WARN), lcd_check_version_set);\
  5020. break;\
  5021. case ClCheckVersion::_Strict:\
  5022. MENU_ITEM_TOGGLE_P(_T(MSG_FIRMWARE), _T(MSG_STRICT), lcd_check_version_set);\
  5023. break;\
  5024. default:\
  5025. MENU_ITEM_TOGGLE_P(_T(MSG_FIRMWARE), _T(MSG_NONE), lcd_check_version_set);\
  5026. }\
  5027. }\
  5028. while (0)
  5029. #if 0 // temporarily unused
  5030. static void lcd_check_gcode_set(void)
  5031. {
  5032. switch(oCheckGcode)
  5033. {
  5034. case ClCheckGcode::_None:
  5035. oCheckGcode=ClCheckGcode::_Warn;
  5036. break;
  5037. case ClCheckGcode::_Warn:
  5038. oCheckGcode=ClCheckGcode::_Strict;
  5039. break;
  5040. case ClCheckGcode::_Strict:
  5041. oCheckGcode=ClCheckGcode::_None;
  5042. break;
  5043. default:
  5044. oCheckGcode=ClCheckGcode::_None;
  5045. }
  5046. eeprom_update_byte((uint8_t*)EEPROM_CHECK_GCODE,(uint8_t)oCheckGcode);
  5047. }
  5048. #endif
  5049. #define SETTINGS_GCODE \
  5050. do\
  5051. {\
  5052. switch(oCheckGcode)\
  5053. {\
  5054. case ClCheckGcode::_None:\
  5055. MENU_ITEM_TOGGLE_P(_T(MSG_GCODE), _T(MSG_NONE), lcd_check_gcode_set);\
  5056. break;\
  5057. case ClCheckGcode::_Warn:\
  5058. MENU_ITEM_TOGGLE_P(_T(MSG_GCODE), _T(MSG_WARN), lcd_check_gcode_set);\
  5059. break;\
  5060. case ClCheckGcode::_Strict:\
  5061. MENU_ITEM_TOGGLE_P(_T(MSG_GCODE), _T(MSG_STRICT), lcd_check_gcode_set);\
  5062. break;\
  5063. default:\
  5064. MENU_ITEM_TOGGLE_P(_T(MSG_GCODE), _T(MSG_NONE), lcd_check_gcode_set);\
  5065. }\
  5066. }\
  5067. while (0)
  5068. static void lcd_checking_menu(void)
  5069. {
  5070. MENU_BEGIN();
  5071. MENU_ITEM_BACK_P(_T(MSG_HW_SETUP));
  5072. SETTINGS_MODE;
  5073. SETTINGS_MODEL;
  5074. SETTINGS_VERSION;
  5075. //-// temporarily disabled
  5076. //SETTINGS_GCODE;
  5077. MENU_END();
  5078. }
  5079. #ifdef IR_SENSOR_ANALOG
  5080. static void lcd_fsensor_actionNA_set(void)
  5081. {
  5082. switch(oFsensorActionNA)
  5083. {
  5084. case ClFsensorActionNA::_Continue:
  5085. oFsensorActionNA=ClFsensorActionNA::_Pause;
  5086. break;
  5087. case ClFsensorActionNA::_Pause:
  5088. oFsensorActionNA=ClFsensorActionNA::_Continue;
  5089. break;
  5090. default:
  5091. oFsensorActionNA=ClFsensorActionNA::_Continue;
  5092. }
  5093. eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_ACTION_NA,(uint8_t)oFsensorActionNA);
  5094. }
  5095. #define FSENSOR_ACTION_NA \
  5096. do\
  5097. {\
  5098. switch(oFsensorActionNA)\
  5099. {\
  5100. case ClFsensorActionNA::_Continue:\
  5101. MENU_ITEM_TOGGLE_P(_T(MSG_FS_ACTION), _T(MSG_FS_CONTINUE), lcd_fsensor_actionNA_set);\
  5102. break;\
  5103. case ClFsensorActionNA::_Pause:\
  5104. MENU_ITEM_TOGGLE_P(_T(MSG_FS_ACTION), _T(MSG_FS_PAUSE), lcd_fsensor_actionNA_set);\
  5105. break;\
  5106. default:\
  5107. oFsensorActionNA=ClFsensorActionNA::_Continue;\
  5108. }\
  5109. }\
  5110. while (0)
  5111. #endif //IR_SENSOR_ANALOG
  5112. template <uint8_t number>
  5113. static void select_sheet_menu()
  5114. {
  5115. selected_sheet = number;
  5116. lcd_sheet_menu();
  5117. }
  5118. static void sheets_menu()
  5119. {
  5120. MENU_BEGIN();
  5121. MENU_ITEM_BACK_P(_i("HW Setup"));
  5122. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[0], select_sheet_menu<0>);
  5123. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[1], select_sheet_menu<1>);
  5124. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[2], select_sheet_menu<2>);
  5125. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[3], select_sheet_menu<3>);
  5126. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[4], select_sheet_menu<4>);
  5127. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[5], select_sheet_menu<5>);
  5128. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[6], select_sheet_menu<6>);
  5129. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[7], select_sheet_menu<7>);
  5130. MENU_END();
  5131. }
  5132. void lcd_hw_setup_menu(void) // can not be "static"
  5133. {
  5134. typedef struct
  5135. {// 2bytes total
  5136. int8_t status;
  5137. uint8_t experimental_menu_visibility;
  5138. } _menu_data_t;
  5139. static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
  5140. _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
  5141. if (_md->status == 0 || lcd_draw_update)
  5142. {
  5143. _md->experimental_menu_visibility = eeprom_read_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY);
  5144. if (_md->experimental_menu_visibility == EEPROM_EMPTY_VALUE)
  5145. {
  5146. _md->experimental_menu_visibility = 0;
  5147. eeprom_update_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY, _md->experimental_menu_visibility);
  5148. }
  5149. }
  5150. MENU_BEGIN();
  5151. MENU_ITEM_BACK_P(_T(bSettings?MSG_SETTINGS:MSG_BACK)); // i.e. default menu-item / menu-item after checking mismatch
  5152. MENU_ITEM_SUBMENU_P(_i("Steel sheets"), sheets_menu); ////MSG_STEEL_SHEETS c=18
  5153. SETTINGS_NOZZLE;
  5154. MENU_ITEM_SUBMENU_P(_i("Checks"), lcd_checking_menu);
  5155. #ifdef IR_SENSOR_ANALOG
  5156. FSENSOR_ACTION_NA;
  5157. //! Fsensor Detection isn't ready for mmu yet it is temporarily disabled.
  5158. //! @todo Don't forget to remove this as soon Fsensor Detection works with mmu
  5159. if(!mmu_enabled) MENU_ITEM_FUNCTION_P(PSTR("Fsensor Detection"), lcd_detect_IRsensor);
  5160. #endif //IR_SENSOR_ANALOG
  5161. if (_md->experimental_menu_visibility)
  5162. {
  5163. MENU_ITEM_SUBMENU_P(PSTR("Experimental"), lcd_experimental_menu);////MSG_MENU_EXPERIMENTAL c=18
  5164. }
  5165. MENU_END();
  5166. }
  5167. static void lcd_settings_menu()
  5168. {
  5169. EEPROM_read(EEPROM_SILENT, (uint8_t*)&SilentModeMenu, sizeof(SilentModeMenu));
  5170. MENU_BEGIN();
  5171. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5172. MENU_ITEM_SUBMENU_P(_i("Temperature"), lcd_control_temperature_menu);////MSG_TEMPERATURE
  5173. if (!homing_flag)
  5174. MENU_ITEM_SUBMENU_P(_i("Move axis"), lcd_move_menu_1mm);////MSG_MOVE_AXIS
  5175. if (!isPrintPaused)
  5176. MENU_ITEM_GCODE_P(_i("Disable steppers"), PSTR("M84"));////MSG_DISABLE_STEPPERS
  5177. SETTINGS_FILAMENT_SENSOR;
  5178. SETTINGS_AUTO_DEPLETE;
  5179. SETTINGS_CUTTER;
  5180. MENU_ITEM_TOGGLE_P(_i("Fans check"), fans_check_enabled ? _T(MSG_ON) : _T(MSG_OFF), lcd_set_fan_check);
  5181. SETTINGS_SILENT_MODE;
  5182. if(!farm_mode)
  5183. {
  5184. bSettings=true; // flag ('fake parameter') for 'lcd_hw_setup_menu()' function
  5185. MENU_ITEM_SUBMENU_P(_i("HW Setup"), lcd_hw_setup_menu);////MSG_HW_SETUP
  5186. }
  5187. SETTINGS_MMU_MODE;
  5188. MENU_ITEM_SUBMENU_P(_i("Mesh bed leveling"), lcd_mesh_bed_leveling_settings);////MSG_MBL_SETTINGS c=18 r=1
  5189. #if defined (TMC2130) && defined (LINEARITY_CORRECTION)
  5190. MENU_ITEM_SUBMENU_P(_i("Lin. correction"), lcd_settings_linearity_correction_menu);
  5191. #endif //LINEARITY_CORRECTION && TMC2130
  5192. if(has_temperature_compensation())
  5193. {
  5194. MENU_ITEM_TOGGLE_P(_T(MSG_TEMP_CALIBRATION), eeprom_read_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE) ? _T(MSG_ON) : _T(MSG_OFF), lcd_temp_calibration_set);
  5195. }
  5196. #ifdef HAS_SECOND_SERIAL_PORT
  5197. MENU_ITEM_TOGGLE_P(_T(MSG_RPI_PORT), (selectedSerialPort == 0) ? _T(MSG_OFF) : _T(MSG_ON), lcd_second_serial_set);
  5198. #endif //HAS_SECOND_SERIAL
  5199. if (!isPrintPaused && !homing_flag)
  5200. MENU_ITEM_SUBMENU_P(_T(MSG_BABYSTEP_Z), lcd_babystep_z);
  5201. #if (LANG_MODE != 0)
  5202. MENU_ITEM_SUBMENU_P(_i("Select language"), lcd_language_menu);////MSG_LANGUAGE_SELECT
  5203. #endif //(LANG_MODE != 0)
  5204. SETTINGS_SD;
  5205. SETTINGS_SOUND;
  5206. #ifdef LCD_BL_PIN
  5207. if (backlightSupport)
  5208. {
  5209. MENU_ITEM_SUBMENU_P(_T(MSG_BRIGHTNESS), lcd_backlight_menu);
  5210. }
  5211. #endif //LCD_BL_PIN
  5212. if (farm_mode)
  5213. {
  5214. MENU_ITEM_SUBMENU_P(PSTR("Farm number"), lcd_farm_no);
  5215. MENU_ITEM_FUNCTION_P(PSTR("Disable farm mode"), lcd_disable_farm_mode);
  5216. }
  5217. MENU_END();
  5218. }
  5219. #ifdef TMC2130
  5220. static void lcd_ustep_linearity_menu_save()
  5221. {
  5222. eeprom_update_byte((uint8_t*)EEPROM_TMC2130_WAVE_X_FAC, tmc2130_wave_fac[X_AXIS]);
  5223. eeprom_update_byte((uint8_t*)EEPROM_TMC2130_WAVE_Y_FAC, tmc2130_wave_fac[Y_AXIS]);
  5224. eeprom_update_byte((uint8_t*)EEPROM_TMC2130_WAVE_Z_FAC, tmc2130_wave_fac[Z_AXIS]);
  5225. eeprom_update_byte((uint8_t*)EEPROM_TMC2130_WAVE_E_FAC, tmc2130_wave_fac[E_AXIS]);
  5226. }
  5227. #endif //TMC2130
  5228. #ifdef TMC2130
  5229. static void lcd_settings_linearity_correction_menu_save()
  5230. {
  5231. bool changed = false;
  5232. if (tmc2130_wave_fac[X_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[X_AXIS] = 0;
  5233. if (tmc2130_wave_fac[Y_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[Y_AXIS] = 0;
  5234. if (tmc2130_wave_fac[Z_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[Z_AXIS] = 0;
  5235. if (tmc2130_wave_fac[E_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[E_AXIS] = 0;
  5236. changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_X_FAC) != tmc2130_wave_fac[X_AXIS]);
  5237. changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_Y_FAC) != tmc2130_wave_fac[Y_AXIS]);
  5238. changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_Z_FAC) != tmc2130_wave_fac[Z_AXIS]);
  5239. changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_E_FAC) != tmc2130_wave_fac[E_AXIS]);
  5240. lcd_ustep_linearity_menu_save();
  5241. if (changed) tmc2130_init();
  5242. }
  5243. #endif //TMC2130
  5244. static void lcd_calibration_menu()
  5245. {
  5246. MENU_BEGIN();
  5247. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5248. if (!isPrintPaused)
  5249. {
  5250. MENU_ITEM_FUNCTION_P(_i("Wizard"), lcd_wizard);////MSG_WIZARD c=17 r=1
  5251. if (lcd_commands_type == LcdCommands::Idle)
  5252. {
  5253. MENU_ITEM_SUBMENU_P(_T(MSG_V2_CALIBRATION), lcd_first_layer_calibration_reset);////MSG_V2_CALIBRATION c=18
  5254. }
  5255. MENU_ITEM_GCODE_P(_T(MSG_AUTO_HOME), PSTR("G28 W"));
  5256. #ifdef TMC2130
  5257. MENU_ITEM_FUNCTION_P(_i("Belt test "), lcd_belttest_v);////MSG_BELTTEST c=17
  5258. #endif //TMC2130
  5259. MENU_ITEM_FUNCTION_P(_i("Selftest "), lcd_selftest_v);////MSG_SELFTEST c=17
  5260. #ifdef MK1BP
  5261. // MK1
  5262. // "Calibrate Z"
  5263. MENU_ITEM_GCODE_P(_T(MSG_HOMEYZ), PSTR("G28 Z"));
  5264. #else //MK1BP
  5265. // MK2
  5266. MENU_ITEM_FUNCTION_P(_i("Calibrate XYZ"), lcd_mesh_calibration);////MSG_CALIBRATE_BED
  5267. // "Calibrate Z" with storing the reference values to EEPROM.
  5268. MENU_ITEM_SUBMENU_P(_T(MSG_HOMEYZ), lcd_mesh_calibration_z);
  5269. #ifndef SNMM
  5270. //MENU_ITEM_FUNCTION_P(_i("Calibrate E"), lcd_calibrate_extruder);////MSG_CALIBRATE_E c=20 r=1
  5271. #endif
  5272. // "Mesh Bed Leveling"
  5273. MENU_ITEM_SUBMENU_P(_i("Mesh Bed Leveling"), lcd_mesh_bedleveling);////MSG_MESH_BED_LEVELING
  5274. #endif //MK1BP
  5275. MENU_ITEM_SUBMENU_P(_i("Bed level correct"), lcd_adjust_bed);////MSG_BED_CORRECTION_MENU
  5276. MENU_ITEM_SUBMENU_P(_i("PID calibration"), pid_extruder);////MSG_PID_EXTRUDER c=17 r=1
  5277. #ifndef TMC2130
  5278. MENU_ITEM_SUBMENU_P(_i("Show end stops"), menu_show_end_stops);////MSG_SHOW_END_STOPS c=18
  5279. #endif
  5280. #ifndef MK1BP
  5281. MENU_ITEM_GCODE_P(_i("Reset XYZ calibr."), PSTR("M44"));////MSG_CALIBRATE_BED_RESET
  5282. #endif //MK1BP
  5283. #ifndef SNMM
  5284. //MENU_ITEM_FUNCTION_P(MSG_RESET_CALIBRATE_E, lcd_extr_cal_reset);
  5285. #endif
  5286. #ifndef MK1BP
  5287. if(has_temperature_compensation())
  5288. {
  5289. MENU_ITEM_SUBMENU_P(_i("Temp. calibration"), lcd_pinda_calibration_menu);////MSG_CALIBRATION_PINDA_MENU c=17 r=1
  5290. }
  5291. #endif //MK1BP
  5292. }
  5293. MENU_END();
  5294. }
  5295. void bowden_menu() {
  5296. int enc_dif = lcd_encoder_diff;
  5297. int cursor_pos = 0;
  5298. lcd_clear();
  5299. lcd_set_cursor(0, 0);
  5300. lcd_print(">");
  5301. for (uint_least8_t i = 0; i < 4; i++) {
  5302. lcd_set_cursor(1, i);
  5303. lcd_print("Extruder ");
  5304. lcd_print(i);
  5305. lcd_print(": ");
  5306. EEPROM_read_B(EEPROM_BOWDEN_LENGTH + i * 2, &bowden_length[i]);
  5307. lcd_print(bowden_length[i] - 48);
  5308. }
  5309. enc_dif = lcd_encoder_diff;
  5310. lcd_consume_click();
  5311. while (1) {
  5312. manage_heater();
  5313. manage_inactivity(true);
  5314. if (abs((enc_dif - lcd_encoder_diff)) > 2) {
  5315. if (enc_dif > lcd_encoder_diff) {
  5316. cursor_pos--;
  5317. }
  5318. if (enc_dif < lcd_encoder_diff) {
  5319. cursor_pos++;
  5320. }
  5321. if (cursor_pos > 3) {
  5322. cursor_pos = 3;
  5323. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5324. }
  5325. if (cursor_pos < 0) {
  5326. cursor_pos = 0;
  5327. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5328. }
  5329. lcd_set_cursor(0, 0);
  5330. lcd_print(" ");
  5331. lcd_set_cursor(0, 1);
  5332. lcd_print(" ");
  5333. lcd_set_cursor(0, 2);
  5334. lcd_print(" ");
  5335. lcd_set_cursor(0, 3);
  5336. lcd_print(" ");
  5337. lcd_set_cursor(0, cursor_pos);
  5338. lcd_print(">");
  5339. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  5340. enc_dif = lcd_encoder_diff;
  5341. _delay(100);
  5342. }
  5343. if (lcd_clicked()) {
  5344. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5345. lcd_clear();
  5346. while (1) {
  5347. manage_heater();
  5348. manage_inactivity(true);
  5349. lcd_set_cursor(1, 1);
  5350. lcd_print("Extruder ");
  5351. lcd_print(cursor_pos);
  5352. lcd_print(": ");
  5353. lcd_set_cursor(13, 1);
  5354. lcd_print(bowden_length[cursor_pos] - 48);
  5355. if (abs((enc_dif - lcd_encoder_diff)) > 2) {
  5356. if (enc_dif > lcd_encoder_diff) {
  5357. bowden_length[cursor_pos]--;
  5358. lcd_set_cursor(13, 1);
  5359. lcd_print(bowden_length[cursor_pos] - 48);
  5360. enc_dif = lcd_encoder_diff;
  5361. }
  5362. if (enc_dif < lcd_encoder_diff) {
  5363. bowden_length[cursor_pos]++;
  5364. lcd_set_cursor(13, 1);
  5365. lcd_print(bowden_length[cursor_pos] - 48);
  5366. enc_dif = lcd_encoder_diff;
  5367. }
  5368. }
  5369. _delay(100);
  5370. if (lcd_clicked()) {
  5371. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5372. EEPROM_save_B(EEPROM_BOWDEN_LENGTH + cursor_pos * 2, &bowden_length[cursor_pos]);
  5373. if (lcd_show_fullscreen_message_yes_no_and_wait_P(PSTR("Continue with another bowden?"))) {
  5374. lcd_update_enable(true);
  5375. lcd_clear();
  5376. enc_dif = lcd_encoder_diff;
  5377. lcd_set_cursor(0, cursor_pos);
  5378. lcd_print(">");
  5379. for (uint_least8_t i = 0; i < 4; i++) {
  5380. lcd_set_cursor(1, i);
  5381. lcd_print("Extruder ");
  5382. lcd_print(i);
  5383. lcd_print(": ");
  5384. EEPROM_read_B(EEPROM_BOWDEN_LENGTH + i * 2, &bowden_length[i]);
  5385. lcd_print(bowden_length[i] - 48);
  5386. }
  5387. break;
  5388. }
  5389. else return;
  5390. }
  5391. }
  5392. }
  5393. }
  5394. }
  5395. #ifdef SNMM
  5396. static char snmm_stop_print_menu() { //menu for choosing which filaments will be unloaded in stop print
  5397. lcd_clear();
  5398. lcd_puts_at_P(0,0,_T(MSG_UNLOAD_FILAMENT)); lcd_print(":");
  5399. lcd_set_cursor(0, 1); lcd_print(">");
  5400. lcd_puts_at_P(1,2,_i("Used during print"));////MSG_USED c=19 r=1
  5401. lcd_puts_at_P(1,3,_i("Current"));////MSG_CURRENT c=19 r=1
  5402. char cursor_pos = 1;
  5403. int enc_dif = 0;
  5404. KEEPALIVE_STATE(PAUSED_FOR_USER);
  5405. lcd_consume_click();
  5406. while (1) {
  5407. manage_heater();
  5408. manage_inactivity(true);
  5409. if (abs((enc_dif - lcd_encoder_diff)) > 4) {
  5410. if ((abs(enc_dif - lcd_encoder_diff)) > 1) {
  5411. if (enc_dif > lcd_encoder_diff) cursor_pos--;
  5412. if (enc_dif < lcd_encoder_diff) cursor_pos++;
  5413. if (cursor_pos > 3) {
  5414. cursor_pos = 3;
  5415. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5416. }
  5417. if (cursor_pos < 1){
  5418. cursor_pos = 1;
  5419. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5420. }
  5421. lcd_set_cursor(0, 1);
  5422. lcd_print(" ");
  5423. lcd_set_cursor(0, 2);
  5424. lcd_print(" ");
  5425. lcd_set_cursor(0, 3);
  5426. lcd_print(" ");
  5427. lcd_set_cursor(0, cursor_pos);
  5428. lcd_print(">");
  5429. enc_dif = lcd_encoder_diff;
  5430. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  5431. _delay(100);
  5432. }
  5433. }
  5434. if (lcd_clicked()) {
  5435. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5436. KEEPALIVE_STATE(IN_HANDLER);
  5437. return(cursor_pos - 1);
  5438. }
  5439. }
  5440. }
  5441. #endif //SNMM
  5442. //! @brief Select one of numbered items
  5443. //!
  5444. //! Create list of items with header. Header can not be selected.
  5445. //! Each item has text description passed by function parameter and
  5446. //! number. There are 5 numbered items, if mmu_enabled, 4 otherwise.
  5447. //! Items are numbered from 1 to 4 or 5. But index returned starts at 0.
  5448. //! There can be last item with different text and no number.
  5449. //!
  5450. //! @param header Header text
  5451. //! @param item Item text
  5452. //! @param last_item Last item text, or nullptr if there is no Last item
  5453. //! @return selected item index, first item index is 0
  5454. uint8_t choose_menu_P(const char *header, const char *item, const char *last_item)
  5455. {
  5456. //following code should handle 3 to 127 number of items well
  5457. const int8_t items_no = last_item?(mmu_enabled?6:5):(mmu_enabled?5:4);
  5458. const uint8_t item_len = item?strlen_P(item):0;
  5459. int8_t first = 0;
  5460. int8_t enc_dif = lcd_encoder_diff;
  5461. int8_t cursor_pos = 1;
  5462. lcd_clear();
  5463. KEEPALIVE_STATE(PAUSED_FOR_USER);
  5464. while (1)
  5465. {
  5466. manage_heater();
  5467. manage_inactivity(true);
  5468. if (abs((enc_dif - lcd_encoder_diff)) > 4)
  5469. {
  5470. if (enc_dif > lcd_encoder_diff)
  5471. {
  5472. cursor_pos--;
  5473. }
  5474. if (enc_dif < lcd_encoder_diff)
  5475. {
  5476. cursor_pos++;
  5477. }
  5478. enc_dif = lcd_encoder_diff;
  5479. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  5480. }
  5481. if (cursor_pos > 3)
  5482. {
  5483. cursor_pos = 3;
  5484. if (first < items_no - 3)
  5485. {
  5486. first++;
  5487. lcd_clear();
  5488. } else { // here we are at the very end of the list
  5489. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5490. }
  5491. }
  5492. if (cursor_pos < 1)
  5493. {
  5494. cursor_pos = 1;
  5495. if (first > 0)
  5496. {
  5497. first--;
  5498. lcd_clear();
  5499. } else { // here we are at the very end of the list
  5500. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5501. }
  5502. }
  5503. if (header) lcd_puts_at_P(0,0,header);
  5504. const bool last_visible = (first == items_no - 3);
  5505. const uint_least8_t ordinary_items = (last_item&&last_visible)?2:3;
  5506. for (uint_least8_t i = 0; i < ordinary_items; i++)
  5507. {
  5508. if (item) lcd_puts_at_P(1, i + 1, item);
  5509. }
  5510. for (uint_least8_t i = 0; i < ordinary_items; i++)
  5511. {
  5512. lcd_set_cursor(2 + item_len, i+1);
  5513. lcd_print(first + i + 1);
  5514. }
  5515. if (last_item&&last_visible) lcd_puts_at_P(1, 3, last_item);
  5516. lcd_set_cursor(0, 1);
  5517. lcd_print(" ");
  5518. lcd_set_cursor(0, 2);
  5519. lcd_print(" ");
  5520. lcd_set_cursor(0, 3);
  5521. lcd_print(" ");
  5522. lcd_set_cursor(0, cursor_pos);
  5523. lcd_print(">");
  5524. _delay(100);
  5525. if (lcd_clicked())
  5526. {
  5527. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5528. KEEPALIVE_STATE(IN_HANDLER);
  5529. lcd_encoder_diff = 0;
  5530. return(cursor_pos + first - 1);
  5531. }
  5532. }
  5533. }
  5534. char reset_menu() {
  5535. #ifdef SNMM
  5536. int items_no = 5;
  5537. #else
  5538. int items_no = 4;
  5539. #endif
  5540. static int first = 0;
  5541. int enc_dif = 0;
  5542. char cursor_pos = 0;
  5543. const char *item [items_no];
  5544. item[0] = "Language";
  5545. item[1] = "Statistics";
  5546. item[2] = "Shipping prep";
  5547. item[3] = "All Data";
  5548. #ifdef SNMM
  5549. item[4] = "Bowden length";
  5550. #endif // SNMM
  5551. enc_dif = lcd_encoder_diff;
  5552. lcd_clear();
  5553. lcd_set_cursor(0, 0);
  5554. lcd_print(">");
  5555. lcd_consume_click();
  5556. while (1) {
  5557. for (uint_least8_t i = 0; i < 4; i++) {
  5558. lcd_set_cursor(1, i);
  5559. lcd_print(item[first + i]);
  5560. }
  5561. manage_heater();
  5562. manage_inactivity(true);
  5563. if (abs((enc_dif - lcd_encoder_diff)) > 4) {
  5564. if ((abs(enc_dif - lcd_encoder_diff)) > 1) {
  5565. if (enc_dif > lcd_encoder_diff) {
  5566. cursor_pos--;
  5567. }
  5568. if (enc_dif < lcd_encoder_diff) {
  5569. cursor_pos++;
  5570. }
  5571. if (cursor_pos > 3) {
  5572. cursor_pos = 3;
  5573. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5574. if (first < items_no - 4) {
  5575. first++;
  5576. lcd_clear();
  5577. }
  5578. }
  5579. if (cursor_pos < 0) {
  5580. cursor_pos = 0;
  5581. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5582. if (first > 0) {
  5583. first--;
  5584. lcd_clear();
  5585. }
  5586. }
  5587. lcd_set_cursor(0, 0);
  5588. lcd_print(" ");
  5589. lcd_set_cursor(0, 1);
  5590. lcd_print(" ");
  5591. lcd_set_cursor(0, 2);
  5592. lcd_print(" ");
  5593. lcd_set_cursor(0, 3);
  5594. lcd_print(" ");
  5595. lcd_set_cursor(0, cursor_pos);
  5596. lcd_print(">");
  5597. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  5598. enc_dif = lcd_encoder_diff;
  5599. _delay(100);
  5600. }
  5601. }
  5602. if (lcd_clicked()) {
  5603. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5604. return(cursor_pos + first);
  5605. }
  5606. }
  5607. }
  5608. static void lcd_disable_farm_mode()
  5609. {
  5610. int8_t disable = lcd_show_fullscreen_message_yes_no_and_wait_P(PSTR("Disable farm mode?"), true, false); //allow timeouting, default no
  5611. if (disable)
  5612. {
  5613. enquecommand_P(PSTR("G99"));
  5614. lcd_return_to_status();
  5615. }
  5616. lcd_update_enable(true);
  5617. lcd_draw_update = 2;
  5618. }
  5619. static void fil_load_menu()
  5620. {
  5621. MENU_BEGIN();
  5622. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5623. MENU_ITEM_FUNCTION_P(_i("Load all"), load_all); ////MSG_LOAD_ALL c=17
  5624. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '1', extr_adj, 0); ////MSG_LOAD_FILAMENT_1 c=16
  5625. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '2', extr_adj, 1); ////MSG_LOAD_FILAMENT_2 c=17
  5626. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '3', extr_adj, 2); ////MSG_LOAD_FILAMENT_3 c=17
  5627. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '4', extr_adj, 3); ////MSG_LOAD_FILAMENT_4 c=17
  5628. if (mmu_enabled)
  5629. {
  5630. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '5', extr_adj, 4);
  5631. }
  5632. MENU_END();
  5633. }
  5634. static void mmu_load_to_nozzle_menu()
  5635. {
  5636. if (bFilamentAction)
  5637. {
  5638. MENU_BEGIN();
  5639. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5640. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '1', lcd_mmu_load_to_nozzle, 0);
  5641. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '2', lcd_mmu_load_to_nozzle, 1);
  5642. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '3', lcd_mmu_load_to_nozzle, 2);
  5643. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '4', lcd_mmu_load_to_nozzle, 3);
  5644. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '5', lcd_mmu_load_to_nozzle, 4);
  5645. MENU_END();
  5646. }
  5647. else
  5648. {
  5649. eFilamentAction = FilamentAction::MmuLoad;
  5650. preheat_or_continue();
  5651. }
  5652. }
  5653. static void mmu_eject_filament(uint8_t filament)
  5654. {
  5655. menu_back();
  5656. mmu_eject_filament(filament, true);
  5657. }
  5658. static void mmu_fil_eject_menu()
  5659. {
  5660. if (bFilamentAction)
  5661. {
  5662. MENU_BEGIN();
  5663. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5664. MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '1', mmu_eject_filament, 0);
  5665. MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '2', mmu_eject_filament, 1);
  5666. MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '3', mmu_eject_filament, 2);
  5667. MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '4', mmu_eject_filament, 3);
  5668. MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '5', mmu_eject_filament, 4);
  5669. MENU_END();
  5670. }
  5671. else
  5672. {
  5673. eFilamentAction = FilamentAction::MmuEject;
  5674. preheat_or_continue();
  5675. }
  5676. }
  5677. #ifdef MMU_HAS_CUTTER
  5678. static void mmu_cut_filament_menu()
  5679. {
  5680. if(bFilamentAction)
  5681. {
  5682. MENU_BEGIN();
  5683. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5684. MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '1', mmu_cut_filament, 0);
  5685. MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '2', mmu_cut_filament, 1);
  5686. MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '3', mmu_cut_filament, 2);
  5687. MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '4', mmu_cut_filament, 3);
  5688. MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '5', mmu_cut_filament, 4);
  5689. MENU_END();
  5690. }
  5691. else
  5692. {
  5693. eFilamentAction=FilamentAction::MmuCut;
  5694. bFilamentFirstRun=false;
  5695. if(target_temperature[0]>=EXTRUDE_MINTEMP)
  5696. {
  5697. bFilamentPreheatState=true;
  5698. mFilamentItem(target_temperature[0],target_temperature_bed);
  5699. }
  5700. else lcd_generic_preheat_menu();
  5701. }
  5702. }
  5703. #endif //MMU_HAS_CUTTER
  5704. #ifdef SNMM
  5705. static void fil_unload_menu()
  5706. {
  5707. MENU_BEGIN();
  5708. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5709. MENU_ITEM_FUNCTION_P(_i("Unload all"), extr_unload_all);////MSG_UNLOAD_ALL c=17
  5710. MENU_ITEM_FUNCTION_P(_i("Unload filament 1"), extr_unload_0);////MSG_UNLOAD_FILAMENT_1 c=17
  5711. MENU_ITEM_FUNCTION_P(_i("Unload filament 2"), extr_unload_1);////MSG_UNLOAD_FILAMENT_2 c=17
  5712. MENU_ITEM_FUNCTION_P(_i("Unload filament 3"), extr_unload_2);////MSG_UNLOAD_FILAMENT_3 c=17
  5713. MENU_ITEM_FUNCTION_P(_i("Unload filament 4"), extr_unload_3);////MSG_UNLOAD_FILAMENT_4 c=17
  5714. if (mmu_enabled)
  5715. MENU_ITEM_FUNCTION_P(_i("Unload filament 5"), extr_unload_4);////MSG_UNLOAD_FILAMENT_5 c=17
  5716. MENU_END();
  5717. }
  5718. static void change_extr_menu(){
  5719. MENU_BEGIN();
  5720. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5721. MENU_ITEM_FUNCTION_P(_i("Extruder 1"), extr_change_0);////MSG_EXTRUDER_1 c=17 r=1
  5722. MENU_ITEM_FUNCTION_P(_i("Extruder 2"), extr_change_1);////MSG_EXTRUDER_2 c=17 r=1
  5723. MENU_ITEM_FUNCTION_P(_i("Extruder 3"), extr_change_2);////MSG_EXTRUDER_3 c=17 r=1
  5724. MENU_ITEM_FUNCTION_P(_i("Extruder 4"), extr_change_3);////MSG_EXTRUDER_4 c=17 r=1
  5725. MENU_END();
  5726. }
  5727. #endif //SNMM
  5728. //unload filament for single material printer (used in M702 gcode)
  5729. void unload_filament()
  5730. {
  5731. custom_message_type = CustomMsg::FilamentLoading;
  5732. lcd_setstatuspgm(_T(MSG_UNLOADING_FILAMENT));
  5733. raise_z_above(MIN_Z_FOR_UNLOAD);
  5734. // extr_unload2();
  5735. current_position[E_AXIS] -= 45;
  5736. plan_buffer_line_curposXYZE(5200 / 60);
  5737. st_synchronize();
  5738. current_position[E_AXIS] -= 15;
  5739. plan_buffer_line_curposXYZE(1000 / 60);
  5740. st_synchronize();
  5741. current_position[E_AXIS] -= 20;
  5742. plan_buffer_line_curposXYZE(1000 / 60);
  5743. st_synchronize();
  5744. lcd_display_message_fullscreen_P(_T(MSG_PULL_OUT_FILAMENT));
  5745. //disable extruder steppers so filament can be removed
  5746. disable_e0();
  5747. disable_e1();
  5748. disable_e2();
  5749. _delay(100);
  5750. Sound_MakeSound(e_SOUND_TYPE_StandardPrompt);
  5751. uint8_t counterBeep = 0;
  5752. while (!lcd_clicked() && (counterBeep < 50)) {
  5753. delay_keep_alive(100);
  5754. counterBeep++;
  5755. }
  5756. st_synchronize();
  5757. while (lcd_clicked()) delay_keep_alive(100);
  5758. lcd_update_enable(true);
  5759. lcd_setstatuspgm(_T(WELCOME_MSG));
  5760. custom_message_type = CustomMsg::Status;
  5761. }
  5762. static void lcd_farm_no()
  5763. {
  5764. char step = 0;
  5765. int enc_dif = 0;
  5766. int _farmno = farm_no;
  5767. int _ret = 0;
  5768. lcd_clear();
  5769. lcd_set_cursor(0, 0);
  5770. lcd_print("Farm no");
  5771. do
  5772. {
  5773. if (abs((enc_dif - lcd_encoder_diff)) > 2) {
  5774. if (enc_dif > lcd_encoder_diff) {
  5775. switch (step) {
  5776. case(0): if (_farmno >= 100) _farmno -= 100; break;
  5777. case(1): if (_farmno % 100 >= 10) _farmno -= 10; break;
  5778. case(2): if (_farmno % 10 >= 1) _farmno--; break;
  5779. default: break;
  5780. }
  5781. }
  5782. if (enc_dif < lcd_encoder_diff) {
  5783. switch (step) {
  5784. case(0): if (_farmno < 900) _farmno += 100; break;
  5785. case(1): if (_farmno % 100 < 90) _farmno += 10; break;
  5786. case(2): if (_farmno % 10 <= 8)_farmno++; break;
  5787. default: break;
  5788. }
  5789. }
  5790. enc_dif = 0;
  5791. lcd_encoder_diff = 0;
  5792. }
  5793. lcd_set_cursor(0, 2);
  5794. if (_farmno < 100) lcd_print("0");
  5795. if (_farmno < 10) lcd_print("0");
  5796. lcd_print(_farmno);
  5797. lcd_print(" ");
  5798. lcd_set_cursor(0, 3);
  5799. lcd_print(" ");
  5800. lcd_set_cursor(step, 3);
  5801. lcd_print("^");
  5802. _delay(100);
  5803. if (lcd_clicked())
  5804. {
  5805. _delay(200);
  5806. step++;
  5807. if(step == 3) {
  5808. _ret = 1;
  5809. farm_no = _farmno;
  5810. EEPROM_save_B(EEPROM_FARM_NUMBER, &farm_no);
  5811. prusa_statistics(20);
  5812. lcd_return_to_status();
  5813. }
  5814. }
  5815. manage_heater();
  5816. } while (_ret == 0);
  5817. }
  5818. unsigned char lcd_choose_color() {
  5819. //function returns index of currently chosen item
  5820. //following part can be modified from 2 to 255 items:
  5821. //-----------------------------------------------------
  5822. unsigned char items_no = 2;
  5823. const char *item[items_no];
  5824. item[0] = "Orange";
  5825. item[1] = "Black";
  5826. //-----------------------------------------------------
  5827. uint_least8_t active_rows;
  5828. static int first = 0;
  5829. int enc_dif = 0;
  5830. unsigned char cursor_pos = 1;
  5831. enc_dif = lcd_encoder_diff;
  5832. lcd_clear();
  5833. lcd_set_cursor(0, 1);
  5834. lcd_print(">");
  5835. active_rows = items_no < 3 ? items_no : 3;
  5836. lcd_consume_click();
  5837. while (1) {
  5838. lcd_puts_at_P(0, 0, PSTR("Choose color:"));
  5839. for (uint_least8_t i = 0; i < active_rows; i++) {
  5840. lcd_set_cursor(1, i+1);
  5841. lcd_print(item[first + i]);
  5842. }
  5843. manage_heater();
  5844. manage_inactivity(true);
  5845. proc_commands();
  5846. if (abs((enc_dif - lcd_encoder_diff)) > 12) {
  5847. if (enc_dif > lcd_encoder_diff) {
  5848. cursor_pos--;
  5849. }
  5850. if (enc_dif < lcd_encoder_diff) {
  5851. cursor_pos++;
  5852. }
  5853. if (cursor_pos > active_rows) {
  5854. cursor_pos = active_rows;
  5855. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5856. if (first < items_no - active_rows) {
  5857. first++;
  5858. lcd_clear();
  5859. }
  5860. }
  5861. if (cursor_pos < 1) {
  5862. cursor_pos = 1;
  5863. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5864. if (first > 0) {
  5865. first--;
  5866. lcd_clear();
  5867. }
  5868. }
  5869. lcd_set_cursor(0, 1);
  5870. lcd_print(" ");
  5871. lcd_set_cursor(0, 2);
  5872. lcd_print(" ");
  5873. lcd_set_cursor(0, 3);
  5874. lcd_print(" ");
  5875. lcd_set_cursor(0, cursor_pos);
  5876. lcd_print(">");
  5877. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  5878. enc_dif = lcd_encoder_diff;
  5879. _delay(100);
  5880. }
  5881. if (lcd_clicked()) {
  5882. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5883. switch(cursor_pos + first - 1) {
  5884. case 0: return 1; break;
  5885. case 1: return 0; break;
  5886. default: return 99; break;
  5887. }
  5888. }
  5889. }
  5890. }
  5891. void lcd_confirm_print()
  5892. {
  5893. uint8_t filament_type;
  5894. int enc_dif = 0;
  5895. int cursor_pos = 1;
  5896. int _ret = 0;
  5897. int _t = 0;
  5898. enc_dif = lcd_encoder_diff;
  5899. lcd_clear();
  5900. lcd_set_cursor(0, 0);
  5901. lcd_print("Print ok ?");
  5902. do
  5903. {
  5904. if (abs(enc_dif - lcd_encoder_diff) > 12) {
  5905. if (enc_dif > lcd_encoder_diff) {
  5906. cursor_pos--;
  5907. }
  5908. if (enc_dif < lcd_encoder_diff) {
  5909. cursor_pos++;
  5910. }
  5911. enc_dif = lcd_encoder_diff;
  5912. }
  5913. if (cursor_pos > 2) { cursor_pos = 2; }
  5914. if (cursor_pos < 1) { cursor_pos = 1; }
  5915. lcd_set_cursor(0, 2); lcd_print(" ");
  5916. lcd_set_cursor(0, 3); lcd_print(" ");
  5917. lcd_set_cursor(2, 2);
  5918. lcd_puts_P(_T(MSG_YES));
  5919. lcd_set_cursor(2, 3);
  5920. lcd_puts_P(_T(MSG_NO));
  5921. lcd_set_cursor(0, 1 + cursor_pos);
  5922. lcd_print(">");
  5923. _delay(100);
  5924. _t = _t + 1;
  5925. if (_t>100)
  5926. {
  5927. prusa_statistics(99);
  5928. _t = 0;
  5929. }
  5930. if (lcd_clicked())
  5931. {
  5932. filament_type = FARM_FILAMENT_COLOR_NONE;
  5933. if (cursor_pos == 1)
  5934. {
  5935. _ret = 1;
  5936. // filament_type = lcd_choose_color();
  5937. prusa_statistics(4, filament_type);
  5938. no_response = true; //we need confirmation by recieving PRUSA thx
  5939. important_status = 4;
  5940. saved_filament_type = filament_type;
  5941. NcTime = _millis();
  5942. }
  5943. if (cursor_pos == 2)
  5944. {
  5945. _ret = 2;
  5946. // filament_type = lcd_choose_color();
  5947. prusa_statistics(5, filament_type);
  5948. no_response = true; //we need confirmation by recieving PRUSA thx
  5949. important_status = 5;
  5950. saved_filament_type = filament_type;
  5951. NcTime = _millis();
  5952. }
  5953. }
  5954. manage_heater();
  5955. manage_inactivity();
  5956. proc_commands();
  5957. } while (_ret == 0);
  5958. }
  5959. #include "w25x20cl.h"
  5960. #ifdef LCD_TEST
  5961. static void lcd_test_menu()
  5962. {
  5963. W25X20CL_SPI_ENTER();
  5964. w25x20cl_enable_wr();
  5965. w25x20cl_chip_erase();
  5966. w25x20cl_disable_wr();
  5967. }
  5968. #endif //LCD_TEST
  5969. static bool fan_error_selftest()
  5970. {
  5971. #ifdef FANCHECK
  5972. if (!fans_check_enabled) return 0;
  5973. fanSpeed = 255;
  5974. #ifdef FAN_SOFT_PWM
  5975. fanSpeedSoftPwm = 255;
  5976. #endif //FAN_SOFT_PWM
  5977. manage_heater(); //enables print fan
  5978. setExtruderAutoFanState(3); //force enables the extruder fan
  5979. #ifdef FAN_SOFT_PWM
  5980. extruder_autofan_last_check = _millis();
  5981. fan_measuring = true;
  5982. #endif //FAN_SOFT_PWM
  5983. _delay(1000); //delay_keep_alive would turn off extruder fan, because temerature is too low (maybe)
  5984. manage_heater();
  5985. fanSpeed = 0;
  5986. setExtruderAutoFanState(1); //releases lock on the extruder fan
  5987. #ifdef FAN_SOFT_PWM
  5988. fanSpeedSoftPwm = 0;
  5989. #endif //FAN_SOFT_PWM
  5990. manage_heater();
  5991. #ifdef TACH_0
  5992. if (fan_speed[0] <= 20) { //extruder fan error
  5993. LCD_ALERTMESSAGERPGM(MSG_FANCHECK_EXTRUDER);
  5994. return 1;
  5995. }
  5996. #endif
  5997. #ifdef TACH_1
  5998. if (fan_speed[1] <= 20) { //print fan error
  5999. LCD_ALERTMESSAGERPGM(MSG_FANCHECK_PRINT);
  6000. return 1;
  6001. }
  6002. #endif
  6003. #endif //FANCHECK
  6004. return 0;
  6005. }
  6006. //! @brief Resume paused print
  6007. //! @todo It is not good to call restore_print_from_ram_and_continue() from function called by lcd_update(),
  6008. //! as restore_print_from_ram_and_continue() calls lcd_update() internally.
  6009. void lcd_resume_print()
  6010. {
  6011. lcd_return_to_status();
  6012. lcd_reset_alert_level(); //for fan speed error
  6013. if (fan_error_selftest()) return; //abort if error persists
  6014. lcd_setstatuspgm(_T(MSG_FINISHING_MOVEMENTS));
  6015. st_synchronize();
  6016. lcd_setstatuspgm(_T(MSG_RESUMING_PRINT)); ////MSG_RESUMING_PRINT c=20
  6017. isPrintPaused = false;
  6018. restore_print_from_ram_and_continue(default_retraction);
  6019. pause_time += (_millis() - start_pause_print); //accumulate time when print is paused for correct statistics calculation
  6020. refresh_cmd_timeout();
  6021. SERIAL_PROTOCOLLNRPGM(MSG_OCTOPRINT_RESUMED); //resume octoprint
  6022. }
  6023. static void change_sheet()
  6024. {
  6025. eeprom_update_byte(&(EEPROM_Sheets_base->active_sheet), selected_sheet);
  6026. menu_back(3);
  6027. }
  6028. static void lcd_rename_sheet_menu()
  6029. {
  6030. struct MenuData
  6031. {
  6032. bool initialized;
  6033. uint8_t selected;
  6034. char name[sizeof(Sheet::name)];
  6035. };
  6036. static_assert(sizeof(menu_data)>= sizeof(MenuData),"MenuData doesn't fit into menu_data");
  6037. MenuData* menuData = (MenuData*)&(menu_data[0]);
  6038. if (!menuData->initialized)
  6039. {
  6040. eeprom_read_block(menuData->name, EEPROM_Sheets_base->s[selected_sheet].name, sizeof(Sheet::name));
  6041. lcd_encoder = menuData->name[0];
  6042. menuData->initialized = true;
  6043. }
  6044. if (lcd_encoder < '\x20') lcd_encoder = '\x20';
  6045. if (lcd_encoder > '\x7F') lcd_encoder = '\x7F';
  6046. menuData->name[menuData->selected] = lcd_encoder;
  6047. lcd_set_cursor(0,0);
  6048. for (uint_least8_t i = 0; i < sizeof(Sheet::name); ++i)
  6049. {
  6050. lcd_putc(menuData->name[i]);
  6051. }
  6052. lcd_set_cursor(menuData->selected, 1);
  6053. lcd_putc('^');
  6054. if (lcd_clicked())
  6055. {
  6056. if ((menuData->selected + 1u) < sizeof(Sheet::name))
  6057. {
  6058. lcd_encoder = menuData->name[++(menuData->selected)];
  6059. }
  6060. else
  6061. {
  6062. eeprom_update_block(menuData->name,
  6063. EEPROM_Sheets_base->s[selected_sheet].name,
  6064. sizeof(Sheet::name));
  6065. menu_back();
  6066. }
  6067. }
  6068. }
  6069. static void lcd_reset_sheet()
  6070. {
  6071. SheetName sheetName;
  6072. eeprom_default_sheet_name(selected_sheet, sheetName);
  6073. eeprom_update_word(reinterpret_cast<uint16_t *>(&(EEPROM_Sheets_base->s[selected_sheet].z_offset)),EEPROM_EMPTY_VALUE16);
  6074. eeprom_update_block(sheetName.c,EEPROM_Sheets_base->s[selected_sheet].name,sizeof(Sheet::name));
  6075. if (selected_sheet == eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))
  6076. {
  6077. eeprom_switch_to_next_sheet();
  6078. if((-1 == eeprom_next_initialized_sheet(0)) && (CALIBRATION_STATUS_CALIBRATED == calibration_status()))
  6079. {
  6080. calibration_status_store(CALIBRATION_STATUS_LIVE_ADJUST);
  6081. }
  6082. }
  6083. menu_back();
  6084. }
  6085. //! @brief Activate selected_sheet and run first layer calibration
  6086. static void activate_calibrate_sheet()
  6087. {
  6088. eeprom_update_byte(&(EEPROM_Sheets_base->active_sheet), selected_sheet);
  6089. lcd_first_layer_calibration_reset();
  6090. }
  6091. static void lcd_sheet_menu()
  6092. {
  6093. MENU_BEGIN();
  6094. MENU_ITEM_BACK_P(_i("Steel sheets")); ////MSG_STEEL_SHEETS c=18
  6095. if(eeprom_is_sheet_initialized(selected_sheet)){
  6096. MENU_ITEM_SUBMENU_P(_i("Select"), change_sheet); //// c=18
  6097. }
  6098. if (lcd_commands_type == LcdCommands::Idle)
  6099. {
  6100. MENU_ITEM_SUBMENU_P(_T(MSG_V2_CALIBRATION), activate_calibrate_sheet);////MSG_V2_CALIBRATION c=18
  6101. }
  6102. MENU_ITEM_SUBMENU_P(_i("Rename"), lcd_rename_sheet_menu); //// c=18
  6103. MENU_ITEM_FUNCTION_P(_i("Reset"), lcd_reset_sheet); //// c=18
  6104. MENU_END();
  6105. }
  6106. static void lcd_main_menu()
  6107. {
  6108. MENU_BEGIN();
  6109. // Majkl superawesome menu
  6110. MENU_ITEM_BACK_P(_T(MSG_WATCH));
  6111. #ifdef RESUME_DEBUG
  6112. if (!saved_printing)
  6113. MENU_ITEM_FUNCTION_P(PSTR("tst - Save"), lcd_menu_test_save);
  6114. else
  6115. MENU_ITEM_FUNCTION_P(PSTR("tst - Restore"), lcd_menu_test_restore);
  6116. #endif //RESUME_DEBUG
  6117. #ifdef TMC2130_DEBUG
  6118. MENU_ITEM_FUNCTION_P(PSTR("recover print"), recover_print);
  6119. MENU_ITEM_FUNCTION_P(PSTR("power panic"), uvlo_);
  6120. #endif //TMC2130_DEBUG
  6121. if ( ( IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LcdCommands::Layer1Cal)) && (current_position[Z_AXIS] < Z_HEIGHT_HIDE_LIVE_ADJUST_MENU) && !homing_flag && !mesh_bed_leveling_flag)
  6122. {
  6123. MENU_ITEM_SUBMENU_P(_T(MSG_BABYSTEP_Z), lcd_babystep_z);//8
  6124. }
  6125. if ( moves_planned() || IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LcdCommands::Layer1Cal))
  6126. {
  6127. MENU_ITEM_SUBMENU_P(_i("Tune"), lcd_tune_menu);////MSG_TUNE
  6128. } else
  6129. {
  6130. MENU_ITEM_SUBMENU_P(_i("Preheat"), lcd_preheat_menu);////MSG_PREHEAT
  6131. }
  6132. if(isPrintPaused && saved_printing_type == PRINTING_TYPE_USB)
  6133. {
  6134. #ifdef FANCHECK
  6135. if((fan_check_error == EFCE_FIXED) || (fan_check_error == EFCE_OK))
  6136. MENU_ITEM_SUBMENU_P(_i("Resume print"), lcd_resume_print);////MSG_RESUME_PRINT
  6137. #else
  6138. MENU_ITEM_SUBMENU_P(_i("Resume print"), lcd_resume_print);////MSG_RESUME_PRINT
  6139. #endif
  6140. }
  6141. #ifdef SDSUPPORT
  6142. if (card.cardOK || lcd_commands_type == LcdCommands::Layer1Cal)
  6143. {
  6144. if (card.isFileOpen())
  6145. {
  6146. if (mesh_bed_leveling_flag == false && homing_flag == false) {
  6147. if (card.sdprinting)
  6148. {
  6149. MENU_ITEM_FUNCTION_P(_i("Pause print"), lcd_pause_print);////MSG_PAUSE_PRINT
  6150. }
  6151. else if(isPrintPaused)
  6152. {
  6153. #ifdef FANCHECK
  6154. if((fan_check_error == EFCE_FIXED) || (fan_check_error == EFCE_OK))
  6155. MENU_ITEM_SUBMENU_P(_i("Resume print"), lcd_resume_print);////MSG_RESUME_PRINT
  6156. #else
  6157. MENU_ITEM_SUBMENU_P(_i("Resume print"), lcd_resume_print);////MSG_RESUME_PRINT
  6158. #endif
  6159. }
  6160. MENU_ITEM_SUBMENU_P(_T(MSG_STOP_PRINT), lcd_sdcard_stop);
  6161. }
  6162. }
  6163. else if (lcd_commands_type == LcdCommands::Layer1Cal && mesh_bed_leveling_flag == false && homing_flag == false) {
  6164. //MENU_ITEM_SUBMENU_P(_T(MSG_STOP_PRINT), lcd_sdcard_stop);
  6165. }
  6166. else
  6167. {
  6168. if (!is_usb_printing && (lcd_commands_type != LcdCommands::Layer1Cal))
  6169. {
  6170. //if (farm_mode) MENU_ITEM_SUBMENU_P(MSG_FARM_CARD_MENU, lcd_farm_sdcard_menu);
  6171. /*else*/ {
  6172. bMain=true; // flag ('fake parameter') for 'lcd_sdcard_menu()' function
  6173. MENU_ITEM_SUBMENU_P(_T(MSG_CARD_MENU), lcd_sdcard_menu);
  6174. }
  6175. }
  6176. #if SDCARDDETECT < 1
  6177. MENU_ITEM_GCODE_P(_i("Change SD card"), PSTR("M21")); // SD-card changed by user////MSG_CNG_SDCARD
  6178. #endif
  6179. }
  6180. } else
  6181. {
  6182. bMain=true; // flag (i.e. 'fake parameter') for 'lcd_sdcard_menu()' function
  6183. MENU_ITEM_SUBMENU_P(_i("No SD card"), lcd_sdcard_menu);////MSG_NO_CARD
  6184. #if SDCARDDETECT < 1
  6185. MENU_ITEM_GCODE_P(_i("Init. SD card"), PSTR("M21")); // Manually initialize the SD-card via user interface////MSG_INIT_SDCARD
  6186. #endif
  6187. }
  6188. #endif
  6189. if(!isPrintPaused && !IS_SD_PRINTING && !is_usb_printing && (lcd_commands_type != LcdCommands::Layer1Cal))
  6190. {
  6191. if (!farm_mode)
  6192. {
  6193. const int8_t sheet = eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet));
  6194. const int8_t nextSheet = eeprom_next_initialized_sheet(sheet);
  6195. if ((nextSheet >= 0) && (sheet != nextSheet)) // show menu only if we have 2 or more sheets initialized
  6196. {
  6197. MENU_ITEM_FUNCTION_E(EEPROM_Sheets_base->s[sheet], eeprom_switch_to_next_sheet);
  6198. }
  6199. }
  6200. }
  6201. if (IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LcdCommands::Layer1Cal))
  6202. {
  6203. if (farm_mode)
  6204. {
  6205. MENU_ITEM_SUBMENU_P(PSTR("Farm number"), lcd_farm_no);
  6206. }
  6207. }
  6208. else
  6209. {
  6210. if (mmu_enabled)
  6211. {
  6212. MENU_ITEM_SUBMENU_P(_T(MSG_LOAD_FILAMENT), fil_load_menu);
  6213. MENU_ITEM_SUBMENU_P(_i("Load to nozzle"), mmu_load_to_nozzle_menu);
  6214. //-// MENU_ITEM_FUNCTION_P(_T(MSG_UNLOAD_FILAMENT), extr_unload);
  6215. //bFilamentFirstRun=true;
  6216. MENU_ITEM_SUBMENU_P(_T(MSG_UNLOAD_FILAMENT), mmu_unload_filament);
  6217. MENU_ITEM_SUBMENU_P(_i("Eject filament"), mmu_fil_eject_menu);
  6218. #ifdef MMU_HAS_CUTTER
  6219. MENU_ITEM_SUBMENU_P(_i("Cut filament"), mmu_cut_filament_menu);
  6220. #endif //MMU_HAS_CUTTER
  6221. }
  6222. else
  6223. {
  6224. #ifdef SNMM
  6225. MENU_ITEM_SUBMENU_P(_T(MSG_UNLOAD_FILAMENT), fil_unload_menu);
  6226. MENU_ITEM_SUBMENU_P(_i("Change extruder"), change_extr_menu);////MSG_CHANGE_EXTR c=20 r=1
  6227. #endif
  6228. #ifdef FILAMENT_SENSOR
  6229. if ((fsensor_autoload_enabled == true) && (fsensor_enabled == true) && (mmu_enabled == false))
  6230. MENU_ITEM_SUBMENU_P(_i("AutoLoad filament"), lcd_menu_AutoLoadFilament);////MSG_AUTOLOAD_FILAMENT c=18
  6231. else
  6232. #endif //FILAMENT_SENSOR
  6233. {
  6234. bFilamentFirstRun=true;
  6235. MENU_ITEM_SUBMENU_P(_T(MSG_LOAD_FILAMENT), lcd_LoadFilament);
  6236. }
  6237. bFilamentFirstRun=true;
  6238. MENU_ITEM_SUBMENU_P(_T(MSG_UNLOAD_FILAMENT), lcd_unLoadFilament);
  6239. }
  6240. MENU_ITEM_SUBMENU_P(_T(MSG_SETTINGS), lcd_settings_menu);
  6241. if(!isPrintPaused) MENU_ITEM_SUBMENU_P(_T(MSG_MENU_CALIBRATION), lcd_calibration_menu);
  6242. }
  6243. if (!is_usb_printing && (lcd_commands_type != LcdCommands::Layer1Cal))
  6244. {
  6245. MENU_ITEM_SUBMENU_P(_i("Statistics "), lcd_menu_statistics);////MSG_STATISTICS
  6246. }
  6247. #if defined(TMC2130) || defined(FILAMENT_SENSOR)
  6248. MENU_ITEM_SUBMENU_P(_i("Fail stats"), lcd_menu_fails_stats);
  6249. #endif
  6250. if (mmu_enabled) {
  6251. MENU_ITEM_SUBMENU_P(_i("Fail stats MMU"), lcd_menu_fails_stats_mmu);
  6252. }
  6253. MENU_ITEM_SUBMENU_P(_i("Support"), lcd_support_menu);////MSG_SUPPORT
  6254. #ifdef LCD_TEST
  6255. MENU_ITEM_SUBMENU_P(_i("W25x20CL init"), lcd_test_menu);////MSG_SUPPORT
  6256. #endif //LCD_TEST
  6257. MENU_END();
  6258. }
  6259. void stack_error() {
  6260. Sound_MakeCustom(1000,0,true);
  6261. lcd_display_message_fullscreen_P(_i("Error - static memory has been overwritten"));////MSG_STACK_ERROR c=20 r=4
  6262. //err_triggered = 1;
  6263. while (1) delay_keep_alive(1000);
  6264. }
  6265. #ifdef DEBUG_STEPPER_TIMER_MISSED
  6266. bool stepper_timer_overflow_state = false;
  6267. uint16_t stepper_timer_overflow_max = 0;
  6268. uint16_t stepper_timer_overflow_last = 0;
  6269. uint16_t stepper_timer_overflow_cnt = 0;
  6270. void stepper_timer_overflow() {
  6271. char msg[28];
  6272. sprintf_P(msg, PSTR("#%d %d max %d"), ++ stepper_timer_overflow_cnt, stepper_timer_overflow_last >> 1, stepper_timer_overflow_max >> 1);
  6273. lcd_setstatus(msg);
  6274. stepper_timer_overflow_state = false;
  6275. if (stepper_timer_overflow_last > stepper_timer_overflow_max)
  6276. stepper_timer_overflow_max = stepper_timer_overflow_last;
  6277. SERIAL_ECHOPGM("Stepper timer overflow: ");
  6278. MYSERIAL.print(msg);
  6279. SERIAL_ECHOLNPGM("");
  6280. WRITE(BEEPER, LOW);
  6281. }
  6282. #endif /* DEBUG_STEPPER_TIMER_MISSED */
  6283. static void lcd_colorprint_change() {
  6284. enquecommand_P(PSTR("M600"));
  6285. custom_message_type = CustomMsg::FilamentLoading; //just print status message
  6286. lcd_setstatuspgm(_T(MSG_FINISHING_MOVEMENTS));
  6287. lcd_return_to_status();
  6288. lcd_draw_update = 3;
  6289. }
  6290. #ifdef LA_LIVE_K
  6291. // @wavexx: looks like there's no generic float editing function in menu.cpp so we
  6292. // redefine our custom handling functions to mimick other tunables
  6293. const char menu_fmt_float13off[] PROGMEM = "%c%-13.13S%6.6S";
  6294. static void lcd_advance_draw_K(char chr, float val)
  6295. {
  6296. if (val <= 0)
  6297. lcd_printf_P(menu_fmt_float13off, chr, MSG_ADVANCE_K, _T(MSG_OFF));
  6298. else
  6299. lcd_printf_P(menu_fmt_float13, chr, MSG_ADVANCE_K, val);
  6300. }
  6301. static void lcd_advance_edit_K(void)
  6302. {
  6303. if (lcd_draw_update)
  6304. {
  6305. if (lcd_encoder < 0) lcd_encoder = 0;
  6306. if (lcd_encoder > 999) lcd_encoder = 999;
  6307. lcd_set_cursor(0, 1);
  6308. lcd_advance_draw_K(' ', 0.01 * lcd_encoder);
  6309. }
  6310. if (LCD_CLICKED)
  6311. {
  6312. extruder_advance_K = 0.01 * lcd_encoder;
  6313. menu_back_no_reset();
  6314. }
  6315. }
  6316. static uint8_t lcd_advance_K()
  6317. {
  6318. if (menu_item == menu_line)
  6319. {
  6320. if (lcd_draw_update)
  6321. {
  6322. lcd_set_cursor(0, menu_row);
  6323. lcd_advance_draw_K((lcd_encoder == menu_item)?'>':' ', extruder_advance_K);
  6324. }
  6325. if (menu_clicked && (lcd_encoder == menu_item))
  6326. {
  6327. menu_submenu_no_reset(lcd_advance_edit_K);
  6328. lcd_encoder = 100. * extruder_advance_K;
  6329. return menu_item_ret();
  6330. }
  6331. }
  6332. menu_item++;
  6333. return 0;
  6334. }
  6335. #define MENU_ITEM_EDIT_advance_K() do { if (lcd_advance_K()) return; } while (0)
  6336. #endif
  6337. static void lcd_tune_menu()
  6338. {
  6339. typedef struct
  6340. {
  6341. menu_data_edit_t reserved; //!< reserved for number editing functions
  6342. int8_t status; //!< To recognize, whether the menu has been just initialized.
  6343. //! Backup of extrudemultiply, to recognize, that the value has been changed and
  6344. //! it needs to be applied.
  6345. int16_t extrudemultiply;
  6346. } _menu_data_t;
  6347. static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
  6348. _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
  6349. if (_md->status == 0)
  6350. {
  6351. // Menu was entered. Mark the menu as entered and save the current extrudemultiply value.
  6352. _md->status = 1;
  6353. _md->extrudemultiply = extrudemultiply;
  6354. }
  6355. else if (_md->extrudemultiply != extrudemultiply)
  6356. {
  6357. // extrudemultiply has been changed from the child menu. Apply the new value.
  6358. _md->extrudemultiply = extrudemultiply;
  6359. calculate_extruder_multipliers();
  6360. }
  6361. EEPROM_read(EEPROM_SILENT, (uint8_t*)&SilentModeMenu, sizeof(SilentModeMenu));
  6362. MENU_BEGIN();
  6363. MENU_ITEM_BACK_P(_T(MSG_MAIN)); //1
  6364. MENU_ITEM_EDIT_int3_P(_i("Speed"), &feedmultiply, 10, 999);//2////MSG_SPEED
  6365. MENU_ITEM_EDIT_int3_P(_T(MSG_NOZZLE), &target_temperature[0], 0, HEATER_0_MAXTEMP - 10);//3
  6366. MENU_ITEM_EDIT_int3_P(_T(MSG_BED), &target_temperature_bed, 0, BED_MAXTEMP - 10);//4
  6367. MENU_ITEM_EDIT_int3_P(_T(MSG_FAN_SPEED), &fanSpeed, 0, 255);//5
  6368. MENU_ITEM_EDIT_int3_P(_i("Flow"), &extrudemultiply, 10, 999);//6////MSG_FLOW
  6369. #ifdef LA_LIVE_K
  6370. MENU_ITEM_EDIT_advance_K();//7
  6371. #endif
  6372. #ifdef FILAMENTCHANGEENABLE
  6373. MENU_ITEM_FUNCTION_P(_T(MSG_FILAMENTCHANGE), lcd_colorprint_change);//8
  6374. #endif
  6375. #ifdef FILAMENT_SENSOR
  6376. if (FSensorStateMenu == 0) {
  6377. if (fsensor_not_responding && (mmu_enabled == false)) {
  6378. /* Filament sensor not working*/
  6379. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_NA), lcd_fsensor_state_set);
  6380. }
  6381. else {
  6382. /* Filament sensor turned off, working, no problems*/
  6383. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_OFF), lcd_fsensor_state_set);
  6384. }
  6385. }
  6386. else {
  6387. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_ON), lcd_fsensor_state_set);
  6388. }
  6389. #ifdef IR_SENSOR_ANALOG
  6390. FSENSOR_ACTION_NA;
  6391. #endif //IR_SENSOR_ANALOG
  6392. #endif //FILAMENT_SENSOR
  6393. SETTINGS_AUTO_DEPLETE;
  6394. SETTINGS_CUTTER;
  6395. if(farm_mode)
  6396. {
  6397. MENU_ITEM_TOGGLE_P(_i("Fans check"), fans_check_enabled ? _T(MSG_ON) : _T(MSG_OFF), lcd_set_fan_check);
  6398. }
  6399. #ifdef TMC2130
  6400. if(!farm_mode)
  6401. {
  6402. if (SilentModeMenu == SILENT_MODE_NORMAL) MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_NORMAL), lcd_silent_mode_set);
  6403. else MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_STEALTH), lcd_silent_mode_set);
  6404. if (SilentModeMenu == SILENT_MODE_NORMAL)
  6405. {
  6406. if (lcd_crash_detect_enabled()) MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_ON), crash_mode_switch);
  6407. else MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_OFF), crash_mode_switch);
  6408. }
  6409. else MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), NULL, lcd_crash_mode_info);
  6410. }
  6411. #else //TMC2130
  6412. if (!farm_mode) { //dont show in menu if we are in farm mode
  6413. switch (SilentModeMenu) {
  6414. case SILENT_MODE_POWER: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set); break;
  6415. case SILENT_MODE_SILENT: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_SILENT), lcd_silent_mode_set); break;
  6416. case SILENT_MODE_AUTO: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_AUTO_POWER), lcd_silent_mode_set); break;
  6417. default: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set); break; // (probably) not needed
  6418. }
  6419. }
  6420. #endif //TMC2130
  6421. SETTINGS_MMU_MODE;
  6422. SETTINGS_SOUND;
  6423. #ifdef LCD_BL_PIN
  6424. if (backlightSupport)
  6425. {
  6426. MENU_ITEM_SUBMENU_P(_T(MSG_BRIGHTNESS), lcd_backlight_menu);
  6427. }
  6428. #endif //LCD_BL_PIN
  6429. MENU_END();
  6430. }
  6431. static void mbl_magnets_elimination_toggle() {
  6432. bool magnet_elimination = (eeprom_read_byte((uint8_t*)EEPROM_MBL_MAGNET_ELIMINATION) > 0);
  6433. magnet_elimination = !magnet_elimination;
  6434. eeprom_update_byte((uint8_t*)EEPROM_MBL_MAGNET_ELIMINATION, (uint8_t)magnet_elimination);
  6435. }
  6436. static void mbl_mesh_toggle() {
  6437. uint8_t mesh_nr = eeprom_read_byte((uint8_t*)EEPROM_MBL_POINTS_NR);
  6438. if(mesh_nr == 3) mesh_nr = 7;
  6439. else mesh_nr = 3;
  6440. eeprom_update_byte((uint8_t*)EEPROM_MBL_POINTS_NR, mesh_nr);
  6441. }
  6442. static void mbl_probe_nr_toggle() {
  6443. mbl_z_probe_nr = eeprom_read_byte((uint8_t*)EEPROM_MBL_PROBE_NR);
  6444. switch (mbl_z_probe_nr) {
  6445. case 1: mbl_z_probe_nr = 3; break;
  6446. case 3: mbl_z_probe_nr = 5; break;
  6447. case 5: mbl_z_probe_nr = 1; break;
  6448. default: mbl_z_probe_nr = 3; break;
  6449. }
  6450. eeprom_update_byte((uint8_t*)EEPROM_MBL_PROBE_NR, mbl_z_probe_nr);
  6451. }
  6452. static void lcd_mesh_bed_leveling_settings()
  6453. {
  6454. bool magnet_elimination = (eeprom_read_byte((uint8_t*)EEPROM_MBL_MAGNET_ELIMINATION) > 0);
  6455. uint8_t points_nr = eeprom_read_byte((uint8_t*)EEPROM_MBL_POINTS_NR);
  6456. char sToggle[4]; //enough for nxn format
  6457. MENU_BEGIN();
  6458. MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
  6459. sToggle[0] = points_nr + '0';
  6460. sToggle[1] = 'x';
  6461. sToggle[2] = points_nr + '0';
  6462. sToggle[3] = 0;
  6463. MENU_ITEM_TOGGLE(_T(MSG_MESH), sToggle, mbl_mesh_toggle);
  6464. sToggle[0] = mbl_z_probe_nr + '0';
  6465. sToggle[1] = 0;
  6466. MENU_ITEM_TOGGLE(_T(MSG_Z_PROBE_NR), sToggle, mbl_probe_nr_toggle);
  6467. MENU_ITEM_TOGGLE_P(_T(MSG_MAGNETS_COMP), (points_nr == 7) ? (magnet_elimination ? _T(MSG_ON): _T(MSG_OFF)) : _T(MSG_NA), mbl_magnets_elimination_toggle);
  6468. MENU_END();
  6469. //SETTINGS_MBL_MODE;
  6470. }
  6471. #ifdef LCD_BL_PIN
  6472. static void backlight_mode_toggle()
  6473. {
  6474. switch (backlightMode)
  6475. {
  6476. case BACKLIGHT_MODE_BRIGHT: backlightMode = BACKLIGHT_MODE_DIM; break;
  6477. case BACKLIGHT_MODE_DIM: backlightMode = BACKLIGHT_MODE_AUTO; break;
  6478. case BACKLIGHT_MODE_AUTO: backlightMode = BACKLIGHT_MODE_BRIGHT; break;
  6479. default: backlightMode = BACKLIGHT_MODE_BRIGHT; break;
  6480. }
  6481. backlight_save();
  6482. }
  6483. static void lcd_backlight_menu()
  6484. {
  6485. MENU_BEGIN();
  6486. ON_MENU_LEAVE(
  6487. backlight_save();
  6488. );
  6489. MENU_ITEM_BACK_P(_T(MSG_BACK));
  6490. MENU_ITEM_EDIT_int3_P(_T(MSG_BL_HIGH), &backlightLevel_HIGH, backlightLevel_LOW, 255);
  6491. MENU_ITEM_EDIT_int3_P(_T(MSG_BL_LOW), &backlightLevel_LOW, 0, backlightLevel_HIGH);
  6492. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), ((backlightMode==BACKLIGHT_MODE_BRIGHT) ? _T(MSG_BRIGHT) : ((backlightMode==BACKLIGHT_MODE_DIM) ? _T(MSG_DIM) : _T(MSG_AUTO))), backlight_mode_toggle);
  6493. MENU_ITEM_EDIT_int3_P(_T(MSG_TIMEOUT), &backlightTimer_period, 1, 999);
  6494. MENU_END();
  6495. }
  6496. #endif //LCD_BL_PIN
  6497. static void lcd_control_temperature_menu()
  6498. {
  6499. #ifdef PIDTEMP
  6500. // set up temp variables - undo the default scaling
  6501. // raw_Ki = unscalePID_i(Ki);
  6502. // raw_Kd = unscalePID_d(Kd);
  6503. #endif
  6504. MENU_BEGIN();
  6505. MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
  6506. #if TEMP_SENSOR_0 != 0
  6507. MENU_ITEM_EDIT_int3_P(_T(MSG_NOZZLE), &target_temperature[0], 0, HEATER_0_MAXTEMP - 10);
  6508. #endif
  6509. #if TEMP_SENSOR_1 != 0
  6510. MENU_ITEM_EDIT_int3_P(_i("Nozzle2"), &target_temperature[1], 0, HEATER_1_MAXTEMP - 10);////MSG_NOZZLE1
  6511. #endif
  6512. #if TEMP_SENSOR_2 != 0
  6513. MENU_ITEM_EDIT_int3_P(_i("Nozzle3"), &target_temperature[2], 0, HEATER_2_MAXTEMP - 10);////MSG_NOZZLE2
  6514. #endif
  6515. #if TEMP_SENSOR_BED != 0
  6516. MENU_ITEM_EDIT_int3_P(_T(MSG_BED), &target_temperature_bed, 0, BED_MAXTEMP - 3);
  6517. #endif
  6518. MENU_ITEM_EDIT_int3_P(_T(MSG_FAN_SPEED), &fanSpeed, 0, 255);
  6519. #if defined AUTOTEMP && (TEMP_SENSOR_0 != 0)
  6520. //MENU_ITEM_EDIT removed, following code must be redesigned if AUTOTEMP enabled
  6521. MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled);
  6522. MENU_ITEM_EDIT(float3, _i(" \002 Min"), &autotemp_min, 0, HEATER_0_MAXTEMP - 10);////MSG_MIN
  6523. MENU_ITEM_EDIT(float3, _i(" \002 Max"), &autotemp_max, 0, HEATER_0_MAXTEMP - 10);////MSG_MAX
  6524. MENU_ITEM_EDIT(float32, _i(" \002 Fact"), &autotemp_factor, 0.0, 1.0);////MSG_FACTOR
  6525. #endif
  6526. MENU_END();
  6527. }
  6528. #if SDCARDDETECT == -1
  6529. static void lcd_sd_refresh()
  6530. {
  6531. card.initsd();
  6532. menu_top = 0;
  6533. }
  6534. #endif
  6535. static void lcd_sd_updir()
  6536. {
  6537. card.updir();
  6538. menu_top = 0;
  6539. }
  6540. void lcd_print_stop()
  6541. {
  6542. if (!card.sdprinting) {
  6543. SERIAL_ECHOLNRPGM(MSG_OCTOPRINT_CANCEL); // for Octoprint
  6544. }
  6545. CRITICAL_SECTION_START;
  6546. // Clear any saved printing state
  6547. cancel_saved_printing();
  6548. // Abort the planner/queue/sd
  6549. planner_abort_hard();
  6550. cmdqueue_reset();
  6551. card.sdprinting = false;
  6552. card.closefile();
  6553. st_reset_timer();
  6554. CRITICAL_SECTION_END;
  6555. #ifdef MESH_BED_LEVELING
  6556. mbl.active = false; //also prevents undoing the mbl compensation a second time in the second planner_abort_hard()
  6557. #endif
  6558. lcd_setstatuspgm(_T(MSG_PRINT_ABORTED));
  6559. stoptime = _millis();
  6560. unsigned long t = (stoptime - starttime - pause_time) / 1000; //time in s
  6561. pause_time = 0;
  6562. save_statistics(total_filament_used, t);
  6563. lcd_commands_step = 0;
  6564. lcd_commands_type = LcdCommands::Idle;
  6565. lcd_cooldown(); //turns off heaters and fan; goes to status screen.
  6566. cancel_heatup = true; //unroll temperature wait loop stack.
  6567. current_position[Z_AXIS] += 10; //lift Z.
  6568. plan_buffer_line_curposXYZE(manual_feedrate[Z_AXIS] / 60);
  6569. if (axis_known_position[X_AXIS] && axis_known_position[Y_AXIS]) //if axis are homed, move to parked position.
  6570. {
  6571. current_position[X_AXIS] = X_CANCEL_POS;
  6572. current_position[Y_AXIS] = Y_CANCEL_POS;
  6573. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6574. }
  6575. st_synchronize();
  6576. if (mmu_enabled) extr_unload(); //M702 C
  6577. finishAndDisableSteppers(); //M84
  6578. lcd_setstatuspgm(_T(WELCOME_MSG));
  6579. custom_message_type = CustomMsg::Status;
  6580. planner_abort_hard(); //needs to be done since plan_buffer_line resets waiting_inside_plan_buffer_line_print_aborted to false. Also copies current to destination.
  6581. axis_relative_modes = E_AXIS_MASK; //XYZ absolute, E relative
  6582. isPrintPaused = false; //clear isPrintPaused flag to allow starting next print after pause->stop scenario.
  6583. }
  6584. void lcd_sdcard_stop()
  6585. {
  6586. lcd_set_cursor(0, 0);
  6587. lcd_puts_P(_T(MSG_STOP_PRINT));
  6588. lcd_set_cursor(2, 2);
  6589. lcd_puts_P(_T(MSG_NO));
  6590. lcd_set_cursor(2, 3);
  6591. lcd_puts_P(_T(MSG_YES));
  6592. lcd_set_cursor(0, 2); lcd_print(" ");
  6593. lcd_set_cursor(0, 3); lcd_print(" ");
  6594. if ((int32_t)lcd_encoder > 2) { lcd_encoder = 2; }
  6595. if ((int32_t)lcd_encoder < 1) { lcd_encoder = 1; }
  6596. lcd_set_cursor(0, 1 + lcd_encoder);
  6597. lcd_print(">");
  6598. if (lcd_clicked())
  6599. {
  6600. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  6601. if ((int32_t)lcd_encoder == 1)
  6602. {
  6603. lcd_return_to_status();
  6604. }
  6605. if ((int32_t)lcd_encoder == 2)
  6606. {
  6607. lcd_print_stop();
  6608. }
  6609. }
  6610. }
  6611. void lcd_sdcard_menu()
  6612. {
  6613. uint8_t sdSort = eeprom_read_byte((uint8_t*)EEPROM_SD_SORT);
  6614. if (presort_flag == true) {
  6615. presort_flag = false;
  6616. card.presort();
  6617. }
  6618. if (lcd_draw_update == 0 && LCD_CLICKED == 0)
  6619. //_delay(100);
  6620. return; // nothing to do (so don't thrash the SD card)
  6621. uint16_t fileCnt = card.getnrfilenames();
  6622. MENU_BEGIN();
  6623. MENU_ITEM_BACK_P(_T(bMain?MSG_MAIN:MSG_BACK)); // i.e. default menu-item / menu-item after card insertion
  6624. card.getWorkDirName();
  6625. if (card.filename[0] == '/')
  6626. {
  6627. #if SDCARDDETECT == -1
  6628. MENU_ITEM_FUNCTION_P(_T(MSG_REFRESH), lcd_sd_refresh);
  6629. #endif
  6630. } else {
  6631. MENU_ITEM_FUNCTION_P(PSTR(LCD_STR_FOLDER ".."), lcd_sd_updir);
  6632. }
  6633. for (uint16_t i = 0; i < fileCnt; i++)
  6634. {
  6635. if (menu_item == menu_line)
  6636. {
  6637. const uint16_t nr = ((sdSort == SD_SORT_NONE) || farm_mode || (sdSort == SD_SORT_TIME)) ? (fileCnt - 1 - i) : i;
  6638. /*#ifdef SDCARD_RATHERRECENTFIRST
  6639. #ifndef SDCARD_SORT_ALPHA
  6640. fileCnt - 1 -
  6641. #endif
  6642. #endif
  6643. i;*/
  6644. #ifdef SDCARD_SORT_ALPHA
  6645. if (sdSort == SD_SORT_NONE) card.getfilename(nr);
  6646. else card.getfilename_sorted(nr);
  6647. #else
  6648. card.getfilename(nr);
  6649. #endif
  6650. if (card.filenameIsDir)
  6651. MENU_ITEM_SDDIR(card.filename, card.longFilename);
  6652. else
  6653. MENU_ITEM_SDFILE(_T(MSG_CARD_MENU), card.filename, card.longFilename);
  6654. } else {
  6655. MENU_ITEM_DUMMY();
  6656. }
  6657. }
  6658. MENU_END();
  6659. }
  6660. #ifdef TMC2130
  6661. static void lcd_belttest_v()
  6662. {
  6663. lcd_belttest();
  6664. menu_back_if_clicked();
  6665. }
  6666. void lcd_belttest()
  6667. {
  6668. lcd_clear();
  6669. // Belttest requires high power mode. Enable it.
  6670. FORCE_HIGH_POWER_START;
  6671. uint16_t X = eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_X));
  6672. uint16_t Y = eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_Y));
  6673. lcd_printf_P(_i("Checking X axis ")); // share message with selftest
  6674. lcd_set_cursor(0,1), lcd_printf_P(PSTR("X: %u -> ..."),X);
  6675. KEEPALIVE_STATE(IN_HANDLER);
  6676. // N.B: it doesn't make sense to handle !lcd_selfcheck...() because selftest_sg throws its own error screen
  6677. // that clobbers ours, with more info than we could provide. So on fail we just fall through to take us back to status.
  6678. if (lcd_selfcheck_axis_sg(X_AXIS)){
  6679. X = eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_X));
  6680. lcd_set_cursor(10,1), lcd_printf_P(PSTR("%u"),X); // Show new X value next to old one.
  6681. lcd_puts_at_P(0,2,_i("Checking Y axis "));
  6682. lcd_set_cursor(0,3), lcd_printf_P(PSTR("Y: %u -> ..."),Y);
  6683. if (lcd_selfcheck_axis_sg(Y_AXIS))
  6684. {
  6685. Y = eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_Y));
  6686. lcd_set_cursor(10,3),lcd_printf_P(PSTR("%u"),Y);
  6687. lcd_set_cursor(19, 3);
  6688. lcd_print(LCD_STR_UPLEVEL);
  6689. lcd_wait_for_click_delay(10);
  6690. }
  6691. }
  6692. FORCE_HIGH_POWER_END;
  6693. KEEPALIVE_STATE(NOT_BUSY);
  6694. }
  6695. #endif //TMC2130
  6696. #ifdef IR_SENSOR_ANALOG
  6697. // called also from marlin_main.cpp
  6698. void printf_IRSensorAnalogBoardChange(){
  6699. printf_P(PSTR("Filament sensor board change detected: revision%S\n"), FsensorIRVersionText());
  6700. }
  6701. static bool lcd_selftest_IRsensor(bool bStandalone)
  6702. {
  6703. bool bPCBrev04;
  6704. uint16_t volt_IR_int;
  6705. volt_IR_int = current_voltage_raw_IR;
  6706. bPCBrev04=(volt_IR_int < IRsensor_Hopen_TRESHOLD);
  6707. printf_P(PSTR("Measured filament sensor high level: %4.2fV\n"), Raw2Voltage(volt_IR_int) );
  6708. if(volt_IR_int < IRsensor_Hmin_TRESHOLD){
  6709. if(!bStandalone)
  6710. lcd_selftest_error(TestError::FsensorLevel,"HIGH","");
  6711. return(false);
  6712. }
  6713. lcd_show_fullscreen_message_and_wait_P(_i("Insert the filament (do not load it) into the extruder and then press the knob."));////c=20 r=6
  6714. volt_IR_int = current_voltage_raw_IR;
  6715. printf_P(PSTR("Measured filament sensor low level: %4.2fV\n"), Raw2Voltage(volt_IR_int));
  6716. if(volt_IR_int > (IRsensor_Lmax_TRESHOLD)){
  6717. if(!bStandalone)
  6718. lcd_selftest_error(TestError::FsensorLevel,"LOW","");
  6719. return(false);
  6720. }
  6721. if((bPCBrev04 ? 1 : 0) != (uint8_t)oFsensorPCB){ // safer then "(uint8_t)bPCBrev04"
  6722. oFsensorPCB=bPCBrev04 ? ClFsensorPCB::_Rev04 : ClFsensorPCB::_Old;
  6723. printf_IRSensorAnalogBoardChange();
  6724. eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_PCB,(uint8_t)oFsensorPCB);
  6725. }
  6726. return(true);
  6727. }
  6728. static void lcd_detect_IRsensor(){
  6729. bool bAction;
  6730. bool loaded;
  6731. bMenuFSDetect = true; // inhibits some code inside "manage_inactivity()"
  6732. /// Check if filament is loaded. If it is loaded stop detection.
  6733. /// @todo Add autodetection with MMU2s
  6734. loaded = ! READ(IR_SENSOR_PIN);
  6735. if(loaded ){
  6736. lcd_show_fullscreen_message_and_wait_P(_i("Please unload the filament first, then repeat this action."));
  6737. return;
  6738. } else {
  6739. lcd_show_fullscreen_message_and_wait_P(_i("Please check the IR sensor connections and filament is unloaded."));
  6740. bAction = lcd_selftest_IRsensor(true);
  6741. }
  6742. if(bAction){
  6743. lcd_show_fullscreen_message_and_wait_P(_i("Sensor verified, remove the filament now."));////c=20 r=3
  6744. // the fsensor board has been successfully identified, any previous "not responding" may be cleared now
  6745. fsensor_not_responding = false;
  6746. } else {
  6747. lcd_show_fullscreen_message_and_wait_P(_i("Verification failed, remove the filament and try again."));////c=20 r=5
  6748. // here it is unclear what to to with the fsensor_not_responding flag
  6749. }
  6750. bMenuFSDetect=false; // de-inhibits some code inside "manage_inactivity()"
  6751. }
  6752. #endif //IR_SENSOR_ANALOG
  6753. static void lcd_selftest_v()
  6754. {
  6755. (void)lcd_selftest();
  6756. }
  6757. bool lcd_selftest()
  6758. {
  6759. int _progress = 0;
  6760. bool _result = true;
  6761. bool _swapped_fan = false;
  6762. #ifdef IR_SENSOR_ANALOG
  6763. //! Check if IR sensor is in unknown state, if so run Fsensor Detection
  6764. //! As the Fsensor Detection isn't yet ready for the mmu2s we set temporarily the IR sensor 0.3 or older for mmu2s
  6765. //! @todo Don't forget to remove this as soon Fsensor Detection works with mmu
  6766. if( oFsensorPCB == ClFsensorPCB::_Undef) {
  6767. if (!mmu_enabled) {
  6768. lcd_detect_IRsensor();
  6769. }
  6770. else {
  6771. eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_PCB,0);
  6772. }
  6773. }
  6774. #endif //IR_SENSOR_ANALOG
  6775. lcd_wait_for_cool_down();
  6776. lcd_clear();
  6777. lcd_set_cursor(0, 0); lcd_puts_P(_i("Self test start "));////MSG_SELFTEST_START c=20
  6778. #ifdef TMC2130
  6779. FORCE_HIGH_POWER_START;
  6780. #endif // TMC2130
  6781. FORCE_BL_ON_START;
  6782. _delay(2000);
  6783. KEEPALIVE_STATE(IN_HANDLER);
  6784. _progress = lcd_selftest_screen(TestScreen::ExtruderFan, _progress, 3, true, 2000);
  6785. #if (defined(FANCHECK) && defined(TACH_0))
  6786. switch (lcd_selftest_fan_auto(0)){ // check extruder Fan
  6787. case FanCheck::ExtruderFan:
  6788. _result = false;
  6789. break;
  6790. case FanCheck::SwappedFan:
  6791. _swapped_fan = true;
  6792. // no break
  6793. default:
  6794. _result = true;
  6795. break;
  6796. }
  6797. #else //defined(TACH_0)
  6798. _result = lcd_selftest_manual_fan_check(0, false);
  6799. #endif //defined(TACH_0)
  6800. if (!_result)
  6801. {
  6802. lcd_selftest_error(TestError::ExtruderFan, "", "");
  6803. }
  6804. if (_result)
  6805. {
  6806. _progress = lcd_selftest_screen(TestScreen::PrintFan, _progress, 3, true, 2000);
  6807. #if (defined(FANCHECK) && defined(TACH_1))
  6808. switch (lcd_selftest_fan_auto(1)){ // check print fan
  6809. case FanCheck::PrintFan:
  6810. _result = false;
  6811. break;
  6812. case FanCheck::SwappedFan:
  6813. _swapped_fan = true;
  6814. // no break
  6815. default:
  6816. _result = true;
  6817. break;
  6818. }
  6819. #else //defined(TACH_1)
  6820. _result = lcd_selftest_manual_fan_check(1, false);
  6821. #endif //defined(TACH_1)
  6822. if (!_result)
  6823. {
  6824. lcd_selftest_error(TestError::PrintFan, "", ""); //print fan not spinning
  6825. }
  6826. }
  6827. if (_swapped_fan) {
  6828. //turn on print fan and check that left extruder fan is not spinning
  6829. _result = lcd_selftest_manual_fan_check(1, true);
  6830. if (_result) {
  6831. //print fan is stil turned on; check that it is spinning
  6832. _result = lcd_selftest_manual_fan_check(1, false, true);
  6833. if (!_result){
  6834. lcd_selftest_error(TestError::PrintFan, "", "");
  6835. }
  6836. }
  6837. else {
  6838. // fans are swapped
  6839. lcd_selftest_error(TestError::SwappedFan, "", "");
  6840. }
  6841. }
  6842. if (_result)
  6843. {
  6844. _progress = lcd_selftest_screen(TestScreen::FansOk, _progress, 3, true, 2000);
  6845. _result = lcd_selfcheck_endstops(); //With TMC2130, only the Z probe is tested.
  6846. }
  6847. if (_result)
  6848. {
  6849. //current_position[Z_AXIS] += 15; //move Z axis higher to avoid false triggering of Z end stop in case that we are very low - just above heatbed
  6850. _progress = lcd_selftest_screen(TestScreen::AxisX, _progress, 3, true, 2000);
  6851. #ifdef TMC2130
  6852. _result = lcd_selfcheck_axis_sg(X_AXIS);
  6853. #else
  6854. _result = lcd_selfcheck_axis(X_AXIS, X_MAX_POS);
  6855. #endif //TMC2130
  6856. }
  6857. if (_result)
  6858. {
  6859. _progress = lcd_selftest_screen(TestScreen::AxisX, _progress, 3, true, 0);
  6860. #ifndef TMC2130
  6861. _result = lcd_selfcheck_pulleys(X_AXIS);
  6862. #endif
  6863. }
  6864. if (_result)
  6865. {
  6866. _progress = lcd_selftest_screen(TestScreen::AxisY, _progress, 3, true, 1500);
  6867. #ifdef TMC2130
  6868. _result = lcd_selfcheck_axis_sg(Y_AXIS);
  6869. #else
  6870. _result = lcd_selfcheck_axis(Y_AXIS, Y_MAX_POS);
  6871. #endif // TMC2130
  6872. }
  6873. if (_result)
  6874. {
  6875. _progress = lcd_selftest_screen(TestScreen::AxisZ, _progress, 3, true, 0);
  6876. #ifndef TMC2130
  6877. _result = lcd_selfcheck_pulleys(Y_AXIS);
  6878. #endif // TMC2130
  6879. }
  6880. if (_result)
  6881. {
  6882. #ifdef TMC2130
  6883. tmc2130_home_exit();
  6884. enable_endstops(false);
  6885. #endif
  6886. //homeaxis(X_AXIS);
  6887. //homeaxis(Y_AXIS);
  6888. current_position[X_AXIS] = pgm_read_float(bed_ref_points_4);
  6889. current_position[Y_AXIS] = pgm_read_float(bed_ref_points_4+1);
  6890. #ifdef TMC2130
  6891. //current_position[X_AXIS] += 0;
  6892. current_position[Y_AXIS] += 4;
  6893. #endif //TMC2130
  6894. current_position[Z_AXIS] = current_position[Z_AXIS] + 10;
  6895. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6896. st_synchronize();
  6897. set_destination_to_current();
  6898. _progress = lcd_selftest_screen(TestScreen::AxisZ, _progress, 3, true, 1500);
  6899. #ifdef TMC2130
  6900. homeaxis(Z_AXIS); //In case of failure, the code gets stuck in this function.
  6901. #else
  6902. _result = lcd_selfcheck_axis(Z_AXIS, Z_MAX_POS);
  6903. #endif //TMC2130
  6904. //raise Z to not damage the bed during and hotend testing
  6905. current_position[Z_AXIS] += 20;
  6906. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6907. st_synchronize();
  6908. }
  6909. #ifdef TMC2130
  6910. if (_result)
  6911. {
  6912. current_position[Z_AXIS] = current_position[Z_AXIS] + 10;
  6913. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6914. st_synchronize();
  6915. _progress = lcd_selftest_screen(TestScreen::Home, 0, 2, true, 0);
  6916. bool bres = tmc2130_home_calibrate(X_AXIS);
  6917. _progress = lcd_selftest_screen(TestScreen::Home, 1, 2, true, 0);
  6918. bres &= tmc2130_home_calibrate(Y_AXIS);
  6919. _progress = lcd_selftest_screen(TestScreen::Home, 2, 2, true, 0);
  6920. if (bres)
  6921. eeprom_update_byte((uint8_t*)EEPROM_TMC2130_HOME_ENABLED, 1);
  6922. _result = bres;
  6923. }
  6924. #endif //TMC2130
  6925. if (_result)
  6926. {
  6927. _progress = lcd_selftest_screen(TestScreen::Bed, _progress, 3, true, 2000);
  6928. _result = lcd_selfcheck_check_heater(true);
  6929. }
  6930. if (_result)
  6931. {
  6932. _progress = lcd_selftest_screen(TestScreen::Hotend, _progress, 3, true, 1000);
  6933. _result = lcd_selfcheck_check_heater(false);
  6934. }
  6935. if (_result)
  6936. {
  6937. _progress = lcd_selftest_screen(TestScreen::HotendOk, _progress, 3, true, 2000); //nozzle ok
  6938. }
  6939. #ifdef FILAMENT_SENSOR
  6940. if (_result)
  6941. {
  6942. if (mmu_enabled)
  6943. {
  6944. _progress = lcd_selftest_screen(TestScreen::Fsensor, _progress, 3, true, 2000); //check filaments sensor
  6945. _result = selftest_irsensor();
  6946. if (_result)
  6947. {
  6948. _progress = lcd_selftest_screen(TestScreen::FsensorOk, _progress, 3, true, 2000); //fil sensor OK
  6949. }
  6950. } else
  6951. {
  6952. #ifdef PAT9125
  6953. _progress = lcd_selftest_screen(TestScreen::Fsensor, _progress, 3, true, 2000); //check filaments sensor
  6954. _result = lcd_selftest_fsensor();
  6955. if (_result)
  6956. {
  6957. _progress = lcd_selftest_screen(TestScreen::FsensorOk, _progress, 3, true, 2000); //fil sensor OK
  6958. }
  6959. #endif //PAT9125
  6960. #if 0
  6961. // Intentionally disabled - that's why we moved the detection to runtime by just checking the two voltages.
  6962. // The idea is not to force the user to remove and insert the filament on an assembled printer.
  6963. //def IR_SENSOR_ANALOG
  6964. _progress = lcd_selftest_screen(TestScreen::Fsensor, _progress, 3, true, 2000); //check filament sensor
  6965. _result = lcd_selftest_IRsensor();
  6966. if (_result)
  6967. {
  6968. _progress = lcd_selftest_screen(TestScreen::FsensorOk, _progress, 3, true, 2000); //filament sensor OK
  6969. }
  6970. #endif //IR_SENSOR_ANALOG
  6971. }
  6972. }
  6973. #endif //FILAMENT_SENSOR
  6974. if (_result)
  6975. {
  6976. _progress = lcd_selftest_screen(TestScreen::AllCorrect, _progress, 3, true, 5000); //all correct
  6977. }
  6978. else
  6979. {
  6980. _progress = lcd_selftest_screen(TestScreen::Failed, _progress, 3, true, 5000);
  6981. }
  6982. lcd_reset_alert_level();
  6983. enquecommand_P(PSTR("M84"));
  6984. lcd_update_enable(true);
  6985. if (_result)
  6986. {
  6987. LCD_ALERTMESSAGERPGM(_i("Self test OK"));////MSG_SELFTEST_OK
  6988. }
  6989. else
  6990. {
  6991. LCD_ALERTMESSAGERPGM(_T(MSG_SELFTEST_FAILED));
  6992. }
  6993. #ifdef TMC2130
  6994. FORCE_HIGH_POWER_END;
  6995. #endif // TMC2130
  6996. FORCE_BL_ON_END;
  6997. KEEPALIVE_STATE(NOT_BUSY);
  6998. return(_result);
  6999. }
  7000. #ifdef TMC2130
  7001. static void reset_crash_det(unsigned char axis) {
  7002. current_position[axis] += 10;
  7003. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7004. st_synchronize();
  7005. if (eeprom_read_byte((uint8_t*)EEPROM_CRASH_DET)) tmc2130_sg_stop_on_crash = true;
  7006. }
  7007. static bool lcd_selfcheck_axis_sg(unsigned char axis) {
  7008. // each axis length is measured twice
  7009. float axis_length, current_position_init, current_position_final;
  7010. float measured_axis_length[2];
  7011. float margin = 60;
  7012. float max_error_mm = 5;
  7013. switch (axis) {
  7014. case 0: axis_length = X_MAX_POS; break;
  7015. case 1: axis_length = Y_MAX_POS + 8; break;
  7016. default: axis_length = 210; break;
  7017. }
  7018. tmc2130_sg_stop_on_crash = false;
  7019. tmc2130_home_exit();
  7020. enable_endstops(true);
  7021. raise_z_above(MESH_HOME_Z_SEARCH);
  7022. st_synchronize();
  7023. tmc2130_home_enter(1 << axis);
  7024. // first axis length measurement begin
  7025. current_position[axis] -= (axis_length + margin);
  7026. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7027. st_synchronize();
  7028. tmc2130_sg_meassure_start(axis);
  7029. current_position_init = st_get_position_mm(axis);
  7030. current_position[axis] += 2 * margin;
  7031. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7032. st_synchronize();
  7033. current_position[axis] += axis_length;
  7034. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7035. st_synchronize();
  7036. uint16_t sg1 = tmc2130_sg_meassure_stop();
  7037. printf_P(PSTR("%c AXIS SG1=%d\n"), 'X'+axis, sg1);
  7038. eeprom_write_word(((uint16_t*)((axis == X_AXIS)?EEPROM_BELTSTATUS_X:EEPROM_BELTSTATUS_Y)), sg1);
  7039. current_position_final = st_get_position_mm(axis);
  7040. measured_axis_length[0] = abs(current_position_final - current_position_init);
  7041. // first measurement end and second measurement begin
  7042. current_position[axis] -= margin;
  7043. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7044. st_synchronize();
  7045. current_position[axis] -= (axis_length + margin);
  7046. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7047. st_synchronize();
  7048. current_position_init = st_get_position_mm(axis);
  7049. measured_axis_length[1] = abs(current_position_final - current_position_init);
  7050. tmc2130_home_exit();
  7051. //end of second measurement, now check for possible errors:
  7052. for(uint_least8_t i = 0; i < 2; i++){ //check if measured axis length corresponds to expected length
  7053. printf_P(_N("Measured axis length:%.3f\n"), measured_axis_length[i]);
  7054. if (abs(measured_axis_length[i] - axis_length) > max_error_mm) {
  7055. enable_endstops(false);
  7056. const char *_error_1;
  7057. if (axis == X_AXIS) _error_1 = "X";
  7058. if (axis == Y_AXIS) _error_1 = "Y";
  7059. if (axis == Z_AXIS) _error_1 = "Z";
  7060. lcd_selftest_error(TestError::Axis, _error_1, "");
  7061. current_position[axis] = 0;
  7062. plan_set_position_curposXYZE();
  7063. reset_crash_det(axis);
  7064. enable_endstops(true);
  7065. endstops_hit_on_purpose();
  7066. return false;
  7067. }
  7068. }
  7069. printf_P(_N("Axis length difference:%.3f\n"), abs(measured_axis_length[0] - measured_axis_length[1]));
  7070. if (abs(measured_axis_length[0] - measured_axis_length[1]) > 1) { //check if difference between first and second measurement is low
  7071. //loose pulleys
  7072. const char *_error_1;
  7073. if (axis == X_AXIS) _error_1 = "X";
  7074. if (axis == Y_AXIS) _error_1 = "Y";
  7075. if (axis == Z_AXIS) _error_1 = "Z";
  7076. lcd_selftest_error(TestError::Pulley, _error_1, "");
  7077. current_position[axis] = 0;
  7078. plan_set_position_curposXYZE();
  7079. reset_crash_det(axis);
  7080. endstops_hit_on_purpose();
  7081. return false;
  7082. }
  7083. current_position[axis] = 0;
  7084. plan_set_position_curposXYZE();
  7085. reset_crash_det(axis);
  7086. endstops_hit_on_purpose();
  7087. return true;
  7088. }
  7089. #endif //TMC2130
  7090. #ifndef TMC2130
  7091. static bool lcd_selfcheck_axis(int _axis, int _travel)
  7092. {
  7093. // printf_P(PSTR("lcd_selfcheck_axis %d, %d\n"), _axis, _travel);
  7094. bool _stepdone = false;
  7095. bool _stepresult = false;
  7096. int _progress = 0;
  7097. int _travel_done = 0;
  7098. int _err_endstop = 0;
  7099. int _lcd_refresh = 0;
  7100. _travel = _travel + (_travel / 10);
  7101. if (_axis == X_AXIS) {
  7102. current_position[Z_AXIS] += 17;
  7103. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7104. }
  7105. do {
  7106. current_position[_axis] = current_position[_axis] - 1;
  7107. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7108. st_synchronize();
  7109. #ifdef TMC2130
  7110. if ((READ(Z_MIN_PIN) ^ (bool)Z_MIN_ENDSTOP_INVERTING))
  7111. #else //TMC2130
  7112. if ((READ(X_MIN_PIN) ^ (bool)X_MIN_ENDSTOP_INVERTING) ||
  7113. (READ(Y_MIN_PIN) ^ (bool)Y_MIN_ENDSTOP_INVERTING) ||
  7114. (READ(Z_MIN_PIN) ^ (bool)Z_MIN_ENDSTOP_INVERTING))
  7115. #endif //TMC2130
  7116. {
  7117. if (_axis == 0)
  7118. {
  7119. _stepresult = ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ? true : false;
  7120. _err_endstop = ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) ? 1 : 2;
  7121. }
  7122. if (_axis == 1)
  7123. {
  7124. _stepresult = ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) ? true : false;
  7125. _err_endstop = ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ? 0 : 2;
  7126. }
  7127. if (_axis == 2)
  7128. {
  7129. _stepresult = ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1) ? true : false;
  7130. _err_endstop = ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ? 0 : 1;
  7131. printf_P(PSTR("lcd_selfcheck_axis %d, %d\n"), _stepresult, _err_endstop);
  7132. /*disable_x();
  7133. disable_y();
  7134. disable_z();*/
  7135. }
  7136. _stepdone = true;
  7137. }
  7138. if (_lcd_refresh < 6)
  7139. {
  7140. _lcd_refresh++;
  7141. }
  7142. else
  7143. {
  7144. _progress = lcd_selftest_screen(static_cast<TestScreen>(static_cast<int>(TestScreen::AxisX) + _axis), _progress, 3, false, 0);
  7145. _lcd_refresh = 0;
  7146. }
  7147. manage_heater();
  7148. manage_inactivity(true);
  7149. //_delay(100);
  7150. (_travel_done <= _travel) ? _travel_done++ : _stepdone = true;
  7151. } while (!_stepdone);
  7152. //current_position[_axis] = current_position[_axis] + 15;
  7153. //plan_buffer_line_curposXYZE(manual_feedrate[0] / 60, active_extruder);
  7154. if (!_stepresult)
  7155. {
  7156. const char *_error_1;
  7157. const char *_error_2;
  7158. if (_axis == X_AXIS) _error_1 = "X";
  7159. if (_axis == Y_AXIS) _error_1 = "Y";
  7160. if (_axis == Z_AXIS) _error_1 = "Z";
  7161. if (_err_endstop == 0) _error_2 = "X";
  7162. if (_err_endstop == 1) _error_2 = "Y";
  7163. if (_err_endstop == 2) _error_2 = "Z";
  7164. if (_travel_done >= _travel)
  7165. {
  7166. lcd_selftest_error(TestError::Endstop, _error_1, _error_2);
  7167. }
  7168. else
  7169. {
  7170. lcd_selftest_error(TestError::Motor, _error_1, _error_2);
  7171. }
  7172. }
  7173. current_position[_axis] = 0; //simulate axis home to avoid negative numbers for axis position, especially Z.
  7174. plan_set_position_curposXYZE();
  7175. return _stepresult;
  7176. }
  7177. static bool lcd_selfcheck_pulleys(int axis)
  7178. {
  7179. float tmp_motor_loud[3] = DEFAULT_PWM_MOTOR_CURRENT_LOUD;
  7180. float tmp_motor[3] = DEFAULT_PWM_MOTOR_CURRENT;
  7181. float current_position_init;
  7182. float move;
  7183. bool endstop_triggered = false;
  7184. int i;
  7185. unsigned long timeout_counter;
  7186. refresh_cmd_timeout();
  7187. manage_inactivity(true);
  7188. if (axis == 0) move = 50; //X_AXIS
  7189. else move = 50; //Y_AXIS
  7190. current_position_init = current_position[axis];
  7191. current_position[axis] += 2;
  7192. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7193. for (i = 0; i < 5; i++) {
  7194. refresh_cmd_timeout();
  7195. current_position[axis] = current_position[axis] + move;
  7196. st_current_set(0, 850); //set motor current higher
  7197. plan_buffer_line_curposXYZE(200);
  7198. st_synchronize();
  7199. if (SilentModeMenu != SILENT_MODE_OFF) st_current_set(0, tmp_motor[0]); //set back to normal operation currents
  7200. else st_current_set(0, tmp_motor_loud[0]); //set motor current back
  7201. current_position[axis] = current_position[axis] - move;
  7202. plan_buffer_line_curposXYZE(50);
  7203. st_synchronize();
  7204. if (((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ||
  7205. ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1)) {
  7206. lcd_selftest_error(TestError::Pulley, (axis == 0) ? "X" : "Y", "");
  7207. return(false);
  7208. }
  7209. }
  7210. timeout_counter = _millis() + 2500;
  7211. endstop_triggered = false;
  7212. manage_inactivity(true);
  7213. while (!endstop_triggered) {
  7214. if (((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ||
  7215. ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1)) {
  7216. endstop_triggered = true;
  7217. if (current_position_init - 1 <= current_position[axis] && current_position_init + 1 >= current_position[axis]) {
  7218. current_position[axis] += 10;
  7219. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7220. st_synchronize();
  7221. return(true);
  7222. }
  7223. else {
  7224. lcd_selftest_error(TestError::Pulley, (axis == 0) ? "X" : "Y", "");
  7225. return(false);
  7226. }
  7227. }
  7228. else {
  7229. current_position[axis] -= 1;
  7230. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7231. st_synchronize();
  7232. if (_millis() > timeout_counter) {
  7233. lcd_selftest_error(TestError::Pulley, (axis == 0) ? "X" : "Y", "");
  7234. return(false);
  7235. }
  7236. }
  7237. }
  7238. return(true);
  7239. }
  7240. #endif //not defined TMC2130
  7241. static bool lcd_selfcheck_endstops()
  7242. {
  7243. bool _result = true;
  7244. if (
  7245. #ifndef TMC2130
  7246. ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ||
  7247. ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) ||
  7248. #endif //!TMC2130
  7249. ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1))
  7250. {
  7251. #ifndef TMC2130
  7252. if ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) current_position[0] += 10;
  7253. if ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) current_position[1] += 10;
  7254. #endif //!TMC2130
  7255. if ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1) current_position[2] += 10;
  7256. }
  7257. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7258. st_synchronize();
  7259. if (
  7260. #ifndef TMC2130
  7261. ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ||
  7262. ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) ||
  7263. #endif //!TMC2130
  7264. ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1))
  7265. {
  7266. _result = false;
  7267. char _error[4] = "";
  7268. #ifndef TMC2130
  7269. if ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "X");
  7270. if ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "Y");
  7271. #endif //!TMC2130
  7272. if ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "Z");
  7273. lcd_selftest_error(TestError::Endstops, _error, "");
  7274. }
  7275. manage_heater();
  7276. manage_inactivity(true);
  7277. return _result;
  7278. }
  7279. static bool lcd_selfcheck_check_heater(bool _isbed)
  7280. {
  7281. int _counter = 0;
  7282. int _progress = 0;
  7283. bool _stepresult = false;
  7284. bool _docycle = true;
  7285. int _checked_snapshot = (_isbed) ? degBed() : degHotend(0);
  7286. int _opposite_snapshot = (_isbed) ? degHotend(0) : degBed();
  7287. int _cycles = (_isbed) ? 180 : 60; //~ 90s / 30s
  7288. target_temperature[0] = (_isbed) ? 0 : 200;
  7289. target_temperature_bed = (_isbed) ? 100 : 0;
  7290. manage_heater();
  7291. manage_inactivity(true);
  7292. KEEPALIVE_STATE(NOT_BUSY); //we are sending temperatures on serial line, so no need to send host keepalive messages
  7293. do {
  7294. _counter++;
  7295. _docycle = (_counter < _cycles) ? true : false;
  7296. manage_heater();
  7297. manage_inactivity(true);
  7298. _progress = (_isbed) ? lcd_selftest_screen(TestScreen::Bed, _progress, 2, false, 400) : lcd_selftest_screen(TestScreen::Hotend, _progress, 2, false, 400);
  7299. /*if (_isbed) {
  7300. MYSERIAL.print("Bed temp:");
  7301. MYSERIAL.println(degBed());
  7302. }
  7303. else {
  7304. MYSERIAL.print("Hotend temp:");
  7305. MYSERIAL.println(degHotend(0));
  7306. }*/
  7307. if(_counter%5 == 0) serialecho_temperatures(); //show temperatures once in two seconds
  7308. } while (_docycle);
  7309. target_temperature[0] = 0;
  7310. target_temperature_bed = 0;
  7311. manage_heater();
  7312. int _checked_result = (_isbed) ? degBed() - _checked_snapshot : degHotend(0) - _checked_snapshot;
  7313. int _opposite_result = (_isbed) ? degHotend(0) - _opposite_snapshot : degBed() - _opposite_snapshot;
  7314. /*
  7315. MYSERIAL.println("");
  7316. MYSERIAL.print("Checked result:");
  7317. MYSERIAL.println(_checked_result);
  7318. MYSERIAL.print("Opposite result:");
  7319. MYSERIAL.println(_opposite_result);
  7320. */
  7321. if (_opposite_result < ((_isbed) ? 30 : 9))
  7322. {
  7323. if (_checked_result >= ((_isbed) ? 9 : 30))
  7324. {
  7325. _stepresult = true;
  7326. }
  7327. else
  7328. {
  7329. lcd_selftest_error(TestError::Heater, "", "");
  7330. }
  7331. }
  7332. else
  7333. {
  7334. lcd_selftest_error(TestError::Bed, "", "");
  7335. }
  7336. manage_heater();
  7337. manage_inactivity(true);
  7338. KEEPALIVE_STATE(IN_HANDLER);
  7339. return _stepresult;
  7340. }
  7341. static void lcd_selftest_error(TestError testError, const char *_error_1, const char *_error_2)
  7342. {
  7343. lcd_beeper_quick_feedback();
  7344. FORCE_BL_ON_END;
  7345. target_temperature[0] = 0;
  7346. target_temperature_bed = 0;
  7347. manage_heater();
  7348. manage_inactivity();
  7349. lcd_clear();
  7350. lcd_set_cursor(0, 0);
  7351. lcd_puts_P(_i("Selftest error !"));////MSG_SELFTEST_ERROR
  7352. lcd_set_cursor(0, 1);
  7353. lcd_puts_P(_i("Please check :"));////MSG_SELFTEST_PLEASECHECK
  7354. switch (testError)
  7355. {
  7356. case TestError::Heater:
  7357. lcd_set_cursor(0, 2);
  7358. lcd_puts_P(_i("Heater/Thermistor"));////MSG_SELFTEST_HEATERTHERMISTOR
  7359. lcd_set_cursor(0, 3);
  7360. lcd_puts_P(_i("Not connected"));////MSG_SELFTEST_NOTCONNECTED
  7361. break;
  7362. case TestError::Bed:
  7363. lcd_set_cursor(0, 2);
  7364. lcd_puts_P(_i("Bed / Heater"));////MSG_SELFTEST_BEDHEATER
  7365. lcd_set_cursor(0, 3);
  7366. lcd_puts_P(_T(MSG_SELFTEST_WIRINGERROR));
  7367. break;
  7368. case TestError::Endstops:
  7369. lcd_set_cursor(0, 2);
  7370. lcd_puts_P(_i("Endstops"));////MSG_SELFTEST_ENDSTOPS
  7371. lcd_set_cursor(0, 3);
  7372. lcd_puts_P(_T(MSG_SELFTEST_WIRINGERROR));
  7373. lcd_set_cursor(17, 3);
  7374. lcd_print(_error_1);
  7375. break;
  7376. case TestError::Motor:
  7377. lcd_set_cursor(0, 2);
  7378. lcd_puts_P(_T(MSG_SELFTEST_MOTOR));
  7379. lcd_set_cursor(18, 2);
  7380. lcd_print(_error_1);
  7381. lcd_set_cursor(0, 3);
  7382. lcd_puts_P(_i("Endstop"));////MSG_SELFTEST_ENDSTOP
  7383. lcd_set_cursor(18, 3);
  7384. lcd_print(_error_2);
  7385. break;
  7386. case TestError::Endstop:
  7387. lcd_set_cursor(0, 2);
  7388. lcd_puts_P(_i("Endstop not hit"));////MSG_SELFTEST_ENDSTOP_NOTHIT c=20
  7389. lcd_set_cursor(0, 3);
  7390. lcd_puts_P(_T(MSG_SELFTEST_MOTOR));
  7391. lcd_set_cursor(18, 3);
  7392. lcd_print(_error_1);
  7393. break;
  7394. case TestError::PrintFan:
  7395. lcd_set_cursor(0, 2);
  7396. lcd_puts_P(_T(MSG_SELFTEST_COOLING_FAN));
  7397. lcd_set_cursor(0, 3);
  7398. lcd_puts_P(_T(MSG_SELFTEST_WIRINGERROR));
  7399. lcd_set_cursor(18, 3);
  7400. lcd_print(_error_1);
  7401. break;
  7402. case TestError::ExtruderFan:
  7403. lcd_set_cursor(0, 2);
  7404. lcd_puts_P(_T(MSG_SELFTEST_EXTRUDER_FAN));
  7405. lcd_set_cursor(0, 3);
  7406. lcd_puts_P(_T(MSG_SELFTEST_WIRINGERROR));
  7407. lcd_set_cursor(18, 3);
  7408. lcd_print(_error_1);
  7409. break;
  7410. case TestError::Pulley:
  7411. lcd_set_cursor(0, 2);
  7412. lcd_puts_P(_i("Loose pulley"));////MSG_LOOSE_PULLEY c=20 r=1
  7413. lcd_set_cursor(0, 3);
  7414. lcd_puts_P(_T(MSG_SELFTEST_MOTOR));
  7415. lcd_set_cursor(18, 3);
  7416. lcd_print(_error_1);
  7417. break;
  7418. case TestError::Axis:
  7419. lcd_set_cursor(0, 2);
  7420. lcd_puts_P(_i("Axis length"));////MSG_SELFTEST_AXIS_LENGTH
  7421. lcd_set_cursor(0, 3);
  7422. lcd_puts_P(_i("Axis"));////MSG_SELFTEST_AXIS
  7423. lcd_set_cursor(18, 3);
  7424. lcd_print(_error_1);
  7425. break;
  7426. case TestError::SwappedFan:
  7427. lcd_set_cursor(0, 2);
  7428. lcd_puts_P(_i("Front/left fans"));////MSG_SELFTEST_FANS
  7429. lcd_set_cursor(0, 3);
  7430. lcd_puts_P(_i("Swapped"));////MSG_SELFTEST_SWAPPED
  7431. lcd_set_cursor(18, 3);
  7432. lcd_print(_error_1);
  7433. break;
  7434. case TestError::WiringFsensor:
  7435. lcd_set_cursor(0, 2);
  7436. lcd_puts_P(_T(MSG_SELFTEST_FILAMENT_SENSOR));
  7437. lcd_set_cursor(0, 3);
  7438. lcd_puts_P(_T(MSG_SELFTEST_WIRINGERROR));
  7439. break;
  7440. case TestError::TriggeringFsensor:
  7441. lcd_set_cursor(0, 2);
  7442. lcd_puts_P(_T(MSG_SELFTEST_FILAMENT_SENSOR));
  7443. lcd_set_cursor(0, 3);
  7444. lcd_puts_P(_i("False triggering"));////c=20
  7445. break;
  7446. case TestError::FsensorLevel:
  7447. lcd_set_cursor(0, 2);
  7448. lcd_puts_P(_T(MSG_SELFTEST_FILAMENT_SENSOR));
  7449. lcd_set_cursor(0, 3);
  7450. lcd_printf_P(_i("%s level expected"),_error_1);////c=20
  7451. break;
  7452. }
  7453. _delay(1000);
  7454. lcd_beeper_quick_feedback();
  7455. do {
  7456. _delay(100);
  7457. manage_heater();
  7458. manage_inactivity();
  7459. } while (!lcd_clicked());
  7460. LCD_ALERTMESSAGERPGM(_T(MSG_SELFTEST_FAILED));
  7461. lcd_return_to_status();
  7462. }
  7463. #ifdef FILAMENT_SENSOR
  7464. #ifdef PAT9125
  7465. static bool lcd_selftest_fsensor(void)
  7466. {
  7467. fsensor_init();
  7468. if (fsensor_not_responding)
  7469. {
  7470. lcd_selftest_error(TestError::WiringFsensor, "", "");
  7471. }
  7472. return (!fsensor_not_responding);
  7473. }
  7474. #endif //PAT9125
  7475. //! @brief Self-test of infrared barrier filament sensor mounted on MK3S with MMUv2 printer
  7476. //!
  7477. //! Test whether sensor is not triggering filament presence when extruder idler is moving without filament.
  7478. //!
  7479. //! Steps:
  7480. //! * Backup current active extruder temperature
  7481. //! * Pre-heat to PLA extrude temperature.
  7482. //! * Unload filament possibly present.
  7483. //! * Move extruder idler same way as during filament load
  7484. //! and sample IR_SENSOR_PIN.
  7485. //! * Check that pin doesn't go low.
  7486. //!
  7487. //! @retval true passed
  7488. //! @retval false failed
  7489. static bool selftest_irsensor()
  7490. {
  7491. class TempBackup
  7492. {
  7493. public:
  7494. TempBackup():
  7495. m_temp(degTargetHotend(active_extruder)),
  7496. m_extruder(active_extruder){}
  7497. ~TempBackup(){setTargetHotend(m_temp,m_extruder);}
  7498. private:
  7499. float m_temp;
  7500. uint8_t m_extruder;
  7501. };
  7502. uint8_t progress;
  7503. {
  7504. TempBackup tempBackup;
  7505. setTargetHotend(ABS_PREHEAT_HOTEND_TEMP,active_extruder);
  7506. mmu_wait_for_heater_blocking();
  7507. progress = lcd_selftest_screen(TestScreen::Fsensor, 0, 1, true, 0);
  7508. mmu_filament_ramming();
  7509. }
  7510. progress = lcd_selftest_screen(TestScreen::Fsensor, progress, 1, true, 0);
  7511. mmu_command(MmuCmd::U0);
  7512. manage_response(false, false);
  7513. for(uint_least8_t i = 0; i < 200; ++i)
  7514. {
  7515. if (0 == (i % 32)) progress = lcd_selftest_screen(TestScreen::Fsensor, progress, 1, true, 0);
  7516. mmu_load_step(false);
  7517. while (blocks_queued())
  7518. {
  7519. if (PIN_GET(IR_SENSOR_PIN) == 0)
  7520. {
  7521. lcd_selftest_error(TestError::TriggeringFsensor, "", "");
  7522. return false;
  7523. }
  7524. #ifdef TMC2130
  7525. manage_heater();
  7526. // Vojtech: Don't disable motors inside the planner!
  7527. if (!tmc2130_update_sg())
  7528. {
  7529. manage_inactivity(true);
  7530. }
  7531. #else //TMC2130
  7532. manage_heater();
  7533. // Vojtech: Don't disable motors inside the planner!
  7534. manage_inactivity(true);
  7535. #endif //TMC2130
  7536. }
  7537. }
  7538. return true;
  7539. }
  7540. #endif //FILAMENT_SENSOR
  7541. static bool lcd_selftest_manual_fan_check(int _fan, bool check_opposite,
  7542. bool _default)
  7543. {
  7544. bool _result = check_opposite;
  7545. lcd_clear();
  7546. lcd_set_cursor(0, 0); lcd_puts_P(_T(MSG_SELFTEST_FAN));
  7547. switch (_fan)
  7548. {
  7549. case 0:
  7550. // extruder cooling fan
  7551. lcd_set_cursor(0, 1);
  7552. if(check_opposite == true) lcd_puts_P(_T(MSG_SELFTEST_COOLING_FAN));
  7553. else lcd_puts_P(_T(MSG_SELFTEST_EXTRUDER_FAN));
  7554. setExtruderAutoFanState(3);
  7555. break;
  7556. case 1:
  7557. // object cooling fan
  7558. lcd_set_cursor(0, 1);
  7559. if (check_opposite == true) lcd_puts_P(_T(MSG_SELFTEST_EXTRUDER_FAN));
  7560. else lcd_puts_P(_T(MSG_SELFTEST_COOLING_FAN));
  7561. SET_OUTPUT(FAN_PIN);
  7562. #ifdef FAN_SOFT_PWM
  7563. fanSpeedSoftPwm = 255;
  7564. #else //FAN_SOFT_PWM
  7565. analogWrite(FAN_PIN, 255);
  7566. #endif //FAN_SOFT_PWM
  7567. break;
  7568. }
  7569. _delay(500);
  7570. lcd_set_cursor(1, 2); lcd_puts_P(_T(MSG_SELFTEST_FAN_YES));
  7571. lcd_set_cursor(0, 3); lcd_print(">");
  7572. lcd_set_cursor(1, 3); lcd_puts_P(_T(MSG_SELFTEST_FAN_NO));
  7573. int8_t enc_dif = int(_default)*3;
  7574. KEEPALIVE_STATE(PAUSED_FOR_USER);
  7575. lcd_button_pressed = false;
  7576. do
  7577. {
  7578. if (abs((enc_dif - lcd_encoder_diff)) > 2) {
  7579. if (enc_dif > lcd_encoder_diff) {
  7580. _result = !check_opposite;
  7581. lcd_set_cursor(0, 2); lcd_print(">");
  7582. lcd_set_cursor(1, 2); lcd_puts_P(_T(MSG_SELFTEST_FAN_YES));
  7583. lcd_set_cursor(0, 3); lcd_print(" ");
  7584. lcd_set_cursor(1, 3); lcd_puts_P(_T(MSG_SELFTEST_FAN_NO));
  7585. }
  7586. if (enc_dif < lcd_encoder_diff) {
  7587. _result = check_opposite;
  7588. lcd_set_cursor(0, 2); lcd_print(" ");
  7589. lcd_set_cursor(1, 2); lcd_puts_P(_T(MSG_SELFTEST_FAN_YES));
  7590. lcd_set_cursor(0, 3); lcd_print(">");
  7591. lcd_set_cursor(1, 3); lcd_puts_P(_T(MSG_SELFTEST_FAN_NO));
  7592. }
  7593. enc_dif = 0;
  7594. lcd_encoder_diff = 0;
  7595. }
  7596. manage_heater();
  7597. _delay(100);
  7598. } while (!lcd_clicked());
  7599. KEEPALIVE_STATE(IN_HANDLER);
  7600. setExtruderAutoFanState(0);
  7601. SET_OUTPUT(FAN_PIN);
  7602. #ifdef FAN_SOFT_PWM
  7603. fanSpeedSoftPwm = 0;
  7604. #else //FAN_SOFT_PWM
  7605. analogWrite(FAN_PIN, 0);
  7606. #endif //FAN_SOFT_PWM
  7607. fanSpeed = 0;
  7608. manage_heater();
  7609. return _result;
  7610. }
  7611. #ifdef FANCHECK
  7612. static FanCheck lcd_selftest_fan_auto(int _fan)
  7613. {
  7614. switch (_fan) {
  7615. case 0:
  7616. fanSpeed = 0;
  7617. manage_heater(); //turn off fan
  7618. setExtruderAutoFanState(3); //extruder fan
  7619. #ifdef FAN_SOFT_PWM
  7620. extruder_autofan_last_check = _millis();
  7621. fan_measuring = true;
  7622. #endif //FAN_SOFT_PWM
  7623. _delay(2000);
  7624. setExtruderAutoFanState(0); //extruder fan
  7625. manage_heater(); //count average fan speed from 2s delay and turn off fans
  7626. printf_P(PSTR("Test 1:\n"));
  7627. printf_P(PSTR("Print fan speed: %d \n"), fan_speed[1]);
  7628. printf_P(PSTR("Extr fan speed: %d \n"), fan_speed[0]);
  7629. if (fan_speed[0] < 20) { // < 1200 RPM would mean either a faulty Noctua or Altfan
  7630. return FanCheck::ExtruderFan;
  7631. }
  7632. #ifdef FAN_SOFT_PWM
  7633. else if (fan_speed[0] > 50 ) { // printerFan is faster
  7634. return FanCheck::SwappedFan;
  7635. }
  7636. break;
  7637. #endif
  7638. case 1:
  7639. //will it work with Thotend > 50 C ?
  7640. #ifdef FAN_SOFT_PWM
  7641. fanSpeed = 255;
  7642. fanSpeedSoftPwm = 255;
  7643. extruder_autofan_last_check = _millis(); //store time when measurement starts
  7644. fan_measuring = true; //start fan measuring, rest is on manage_heater
  7645. #else //FAN_SOFT_PWM
  7646. fanSpeed = 150; //print fan
  7647. #endif //FAN_SOFT_PWM
  7648. for (uint8_t i = 0; i < 5; i++) {
  7649. delay_keep_alive(1000);
  7650. lcd_set_cursor(18, 3);
  7651. lcd_print("-");
  7652. delay_keep_alive(1000);
  7653. lcd_set_cursor(18, 3);
  7654. lcd_print("|");
  7655. }
  7656. fanSpeed = 0;
  7657. #ifdef FAN_SOFT_PWM
  7658. fanSpeedSoftPwm = 0;
  7659. #else //FAN_SOFT_PWM
  7660. manage_heater(); //turn off fan
  7661. manage_inactivity(true); //to turn off print fan
  7662. #endif //FAN_SOFT_PWM
  7663. printf_P(PSTR("Test 2:\n"));
  7664. printf_P(PSTR("Print fan speed: %d \n"), fan_speed[1]);
  7665. printf_P(PSTR("Extr fan speed: %d \n"), fan_speed[0]);
  7666. if (!fan_speed[1]) {
  7667. return FanCheck::PrintFan;
  7668. }
  7669. #ifdef FAN_SOFT_PWM
  7670. fanSpeed = 80;
  7671. fanSpeedSoftPwm = 80;
  7672. for (uint8_t i = 0; i < 5; i++) {
  7673. delay_keep_alive(1000);
  7674. lcd_set_cursor(18, 3);
  7675. lcd_print("-");
  7676. delay_keep_alive(1000);
  7677. lcd_set_cursor(18, 3);
  7678. lcd_print("|");
  7679. }
  7680. fanSpeed = 0;
  7681. // noctua speed is between 17 and 24, turbine more then 30
  7682. if (fan_speed[1] < 30) {
  7683. return FanCheck::SwappedFan;
  7684. }
  7685. #else
  7686. // fan is spinning, but measured RPM are too low for print fan, it must
  7687. // be left extruder fan
  7688. else if (fan_speed[1] < 34) {
  7689. return FanCheck::SwappedFan;
  7690. }
  7691. #endif //FAN_SOFT_PWM
  7692. break;
  7693. }
  7694. return FanCheck::Success;
  7695. }
  7696. #endif //FANCHECK
  7697. static int lcd_selftest_screen(TestScreen screen, int _progress, int _progress_scale, bool _clear, int _delay)
  7698. {
  7699. lcd_update_enable(false);
  7700. const char *_indicator = (_progress >= _progress_scale) ? "-" : "|";
  7701. if (_clear) lcd_clear();
  7702. lcd_set_cursor(0, 0);
  7703. if (screen == TestScreen::ExtruderFan) lcd_puts_P(_T(MSG_SELFTEST_FAN));
  7704. if (screen == TestScreen::PrintFan) lcd_puts_P(_T(MSG_SELFTEST_FAN));
  7705. if (screen == TestScreen::FansOk) lcd_puts_P(_T(MSG_SELFTEST_FAN));
  7706. if (screen == TestScreen::EndStops) lcd_puts_P(_i("Checking endstops"));////MSG_SELFTEST_CHECK_ENDSTOPS c=20
  7707. if (screen == TestScreen::AxisX) lcd_puts_P(_i("Checking X axis "));////MSG_SELFTEST_CHECK_X c=20
  7708. if (screen == TestScreen::AxisY) lcd_puts_P(_i("Checking Y axis "));////MSG_SELFTEST_CHECK_Y c=20
  7709. if (screen == TestScreen::AxisZ) lcd_puts_P(_i("Checking Z axis "));////MSG_SELFTEST_CHECK_Z c=20
  7710. if (screen == TestScreen::Bed) lcd_puts_P(_T(MSG_SELFTEST_CHECK_BED));
  7711. if (screen == TestScreen::Hotend
  7712. || screen == TestScreen::HotendOk) lcd_puts_P(_i("Checking hotend "));////MSG_SELFTEST_CHECK_HOTEND c=20
  7713. if (screen == TestScreen::Fsensor) lcd_puts_P(_T(MSG_SELFTEST_CHECK_FSENSOR));
  7714. if (screen == TestScreen::FsensorOk) lcd_puts_P(_T(MSG_SELFTEST_CHECK_FSENSOR));
  7715. if (screen == TestScreen::AllCorrect) lcd_puts_P(_i("All correct "));////MSG_SELFTEST_CHECK_ALLCORRECT c=20
  7716. if (screen == TestScreen::Failed) lcd_puts_P(_T(MSG_SELFTEST_FAILED));
  7717. if (screen == TestScreen::Home) lcd_puts_P(_i("Calibrating home"));////c=20 r=1
  7718. lcd_set_cursor(0, 1);
  7719. lcd_puts_P(separator);
  7720. if ((screen >= TestScreen::ExtruderFan) && (screen <= TestScreen::FansOk))
  7721. {
  7722. //SERIAL_ECHOLNPGM("Fan test");
  7723. lcd_puts_at_P(0, 2, _i("Extruder fan:"));////MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
  7724. lcd_set_cursor(18, 2);
  7725. (screen < TestScreen::PrintFan) ? lcd_print(_indicator) : lcd_print("OK");
  7726. lcd_puts_at_P(0, 3, _i("Print fan:"));////MSG_SELFTEST_PRINT_FAN_SPEED c=18
  7727. lcd_set_cursor(18, 3);
  7728. (screen < TestScreen::FansOk) ? lcd_print(_indicator) : lcd_print("OK");
  7729. }
  7730. else if (screen >= TestScreen::Fsensor && screen <= TestScreen::FsensorOk)
  7731. {
  7732. lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_FILAMENT_SENSOR));
  7733. lcd_putc(':');
  7734. lcd_set_cursor(18, 2);
  7735. (screen == TestScreen::Fsensor) ? lcd_print(_indicator) : lcd_print("OK");
  7736. }
  7737. else if (screen < TestScreen::Fsensor)
  7738. {
  7739. //SERIAL_ECHOLNPGM("Other tests");
  7740. TestScreen _step_block = TestScreen::AxisX;
  7741. lcd_selftest_screen_step(2, 2, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), "X", _indicator);
  7742. _step_block = TestScreen::AxisY;
  7743. lcd_selftest_screen_step(2, 8, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), "Y", _indicator);
  7744. _step_block = TestScreen::AxisZ;
  7745. lcd_selftest_screen_step(2, 14, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), "Z", _indicator);
  7746. _step_block = TestScreen::Bed;
  7747. lcd_selftest_screen_step(3, 0, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), "Bed", _indicator);
  7748. _step_block = TestScreen::Hotend;
  7749. lcd_selftest_screen_step(3, 9, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), "Hotend", _indicator);
  7750. }
  7751. if (_delay > 0) delay_keep_alive(_delay);
  7752. _progress++;
  7753. return (_progress >= _progress_scale * 2) ? 0 : _progress;
  7754. }
  7755. static void lcd_selftest_screen_step(int _row, int _col, int _state, const char *_name, const char *_indicator)
  7756. {
  7757. lcd_set_cursor(_col, _row);
  7758. switch (_state)
  7759. {
  7760. case 1:
  7761. lcd_print(_name);
  7762. lcd_set_cursor(_col + strlen(_name), _row);
  7763. lcd_print(":");
  7764. lcd_set_cursor(_col + strlen(_name) + 1, _row);
  7765. lcd_print(_indicator);
  7766. break;
  7767. case 2:
  7768. lcd_print(_name);
  7769. lcd_set_cursor(_col + strlen(_name), _row);
  7770. lcd_print(":");
  7771. lcd_set_cursor(_col + strlen(_name) + 1, _row);
  7772. lcd_print("OK");
  7773. break;
  7774. default:
  7775. lcd_print(_name);
  7776. }
  7777. }
  7778. /** End of menus **/
  7779. /** Menu action functions **/
  7780. static bool check_file(const char* filename) {
  7781. if (farm_mode) return true;
  7782. bool result = false;
  7783. uint32_t filesize;
  7784. card.openFile((char*)filename, true);
  7785. filesize = card.getFileSize();
  7786. if (filesize > END_FILE_SECTION) {
  7787. card.setIndex(filesize - END_FILE_SECTION);
  7788. }
  7789. while (!card.eof() && !result) {
  7790. card.sdprinting = true;
  7791. get_command();
  7792. result = check_commands();
  7793. }
  7794. card.printingHasFinished();
  7795. strncpy_P(lcd_status_message, _T(WELCOME_MSG), LCD_WIDTH);
  7796. lcd_finishstatus();
  7797. return result;
  7798. }
  7799. static void menu_action_sdfile(const char* filename)
  7800. {
  7801. loading_flag = false;
  7802. char cmd[30];
  7803. char* c;
  7804. bool result = true;
  7805. sprintf_P(cmd, PSTR("M23 %s"), filename);
  7806. for (c = &cmd[4]; *c; c++)
  7807. *c = tolower(*c);
  7808. const char end[5] = ".gco";
  7809. //we are storing just first 8 characters of 8.3 filename assuming that extension is always ".gco"
  7810. for (uint_least8_t i = 0; i < 8; i++) {
  7811. if (strcmp((cmd + i + 4), end) == 0) {
  7812. //filename is shorter then 8.3, store '\0' character on position where ".gco" string was found to terminate stored string properly
  7813. eeprom_write_byte((uint8_t*)EEPROM_FILENAME + i, '\0');
  7814. break;
  7815. }
  7816. else {
  7817. eeprom_write_byte((uint8_t*)EEPROM_FILENAME + i, cmd[i + 4]);
  7818. }
  7819. }
  7820. uint8_t depth = (uint8_t)card.getWorkDirDepth();
  7821. eeprom_write_byte((uint8_t*)EEPROM_DIR_DEPTH, depth);
  7822. for (uint_least8_t i = 0; i < depth; i++) {
  7823. for (uint_least8_t j = 0; j < 8; j++) {
  7824. eeprom_write_byte((uint8_t*)EEPROM_DIRS + j + 8 * i, dir_names[i][j]);
  7825. }
  7826. }
  7827. if (!check_file(filename)) {
  7828. result = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("File incomplete. Continue anyway?"), false, false);////MSG_FILE_INCOMPLETE c=20 r=3
  7829. lcd_update_enable(true);
  7830. }
  7831. if (result) {
  7832. enquecommand(cmd);
  7833. enquecommand_P(PSTR("M24"));
  7834. }
  7835. lcd_return_to_status();
  7836. }
  7837. void menu_action_sddirectory(const char* filename)
  7838. {
  7839. uint8_t depth = (uint8_t)card.getWorkDirDepth();
  7840. strcpy(dir_names[depth], filename);
  7841. MYSERIAL.println(dir_names[depth]);
  7842. card.chdir(filename);
  7843. lcd_encoder = 0;
  7844. }
  7845. /** LCD API **/
  7846. void ultralcd_init()
  7847. {
  7848. {
  7849. uint8_t autoDepleteRaw = eeprom_read_byte(reinterpret_cast<uint8_t*>(EEPROM_AUTO_DEPLETE));
  7850. if (0xff == autoDepleteRaw) lcd_autoDeplete = false;
  7851. else lcd_autoDeplete = autoDepleteRaw;
  7852. }
  7853. backlight_init();
  7854. lcd_init();
  7855. lcd_refresh();
  7856. lcd_longpress_func = menu_lcd_longpress_func;
  7857. lcd_charsetup_func = menu_lcd_charsetup_func;
  7858. lcd_lcdupdate_func = menu_lcd_lcdupdate_func;
  7859. menu_menu = lcd_status_screen;
  7860. menu_lcd_charsetup_func();
  7861. SET_INPUT(BTN_EN1);
  7862. SET_INPUT(BTN_EN2);
  7863. WRITE(BTN_EN1, HIGH);
  7864. WRITE(BTN_EN2, HIGH);
  7865. #if BTN_ENC > 0
  7866. SET_INPUT(BTN_ENC);
  7867. WRITE(BTN_ENC, HIGH);
  7868. #endif
  7869. #if defined (SDSUPPORT) && defined(SDCARDDETECT) && (SDCARDDETECT > 0)
  7870. pinMode(SDCARDDETECT, INPUT);
  7871. WRITE(SDCARDDETECT, HIGH);
  7872. lcd_oldcardstatus = IS_SD_INSERTED;
  7873. #endif//(SDCARDDETECT > 0)
  7874. lcd_encoder_diff = 0;
  7875. }
  7876. void lcd_printer_connected() {
  7877. printer_connected = true;
  7878. }
  7879. static void lcd_send_status() {
  7880. if (farm_mode && no_response && ((_millis() - NcTime) > (NC_TIME * 1000))) {
  7881. //send important status messages periodicaly
  7882. prusa_statistics(important_status, saved_filament_type);
  7883. NcTime = _millis();
  7884. #ifdef FARM_CONNECT_MESSAGE
  7885. lcd_connect_printer();
  7886. #endif //FARM_CONNECT_MESSAGE
  7887. }
  7888. }
  7889. #ifdef FARM_CONNECT_MESSAGE
  7890. static void lcd_connect_printer() {
  7891. lcd_update_enable(false);
  7892. lcd_clear();
  7893. int i = 0;
  7894. int t = 0;
  7895. lcd_set_custom_characters_progress();
  7896. lcd_puts_at_P(0, 0, _i("Connect printer to"));
  7897. lcd_puts_at_P(0, 1, _i("monitoring or hold"));
  7898. lcd_puts_at_P(0, 2, _i("the knob to continue"));
  7899. while (no_response) {
  7900. i++;
  7901. t++;
  7902. delay_keep_alive(100);
  7903. proc_commands();
  7904. if (t == 10) {
  7905. prusa_statistics(important_status, saved_filament_type);
  7906. t = 0;
  7907. }
  7908. if (READ(BTN_ENC)) { //if button is not pressed
  7909. i = 0;
  7910. lcd_puts_at_P(0, 3, PSTR(" "));
  7911. }
  7912. if (i!=0) lcd_puts_at_P((i * 20) / (NC_BUTTON_LONG_PRESS * 10), 3, "\x01");
  7913. if (i == NC_BUTTON_LONG_PRESS * 10) {
  7914. no_response = false;
  7915. }
  7916. }
  7917. lcd_set_custom_characters_degree();
  7918. lcd_update_enable(true);
  7919. lcd_update(2);
  7920. }
  7921. #endif //FARM_CONNECT_MESSAGE
  7922. void lcd_ping() { //chceck if printer is connected to monitoring when in farm mode
  7923. if (farm_mode) {
  7924. bool empty = is_buffer_empty();
  7925. if ((_millis() - PingTime) * 0.001 > (empty ? PING_TIME : PING_TIME_LONG)) { //if commands buffer is empty use shorter time period
  7926. //if there are comamnds in buffer, some long gcodes can delay execution of ping command
  7927. //therefore longer period is used
  7928. printer_connected = false;
  7929. }
  7930. else {
  7931. lcd_printer_connected();
  7932. }
  7933. }
  7934. }
  7935. void lcd_ignore_click(bool b)
  7936. {
  7937. ignore_click = b;
  7938. wait_for_unclick = false;
  7939. }
  7940. void lcd_finishstatus() {
  7941. int len = strlen(lcd_status_message);
  7942. if (len > 0) {
  7943. while (len < LCD_WIDTH) {
  7944. lcd_status_message[len++] = ' ';
  7945. }
  7946. }
  7947. lcd_status_message[LCD_WIDTH] = '\0';
  7948. lcd_draw_update = 2;
  7949. }
  7950. void lcd_setstatus(const char* message)
  7951. {
  7952. if (lcd_status_message_level > 0)
  7953. return;
  7954. lcd_updatestatus(message);
  7955. }
  7956. void lcd_updatestatuspgm(const char *message){
  7957. strncpy_P(lcd_status_message, message, LCD_WIDTH);
  7958. lcd_status_message[LCD_WIDTH] = 0;
  7959. lcd_finishstatus();
  7960. // hack lcd_draw_update to 1, i.e. without clear
  7961. lcd_draw_update = 1;
  7962. }
  7963. void lcd_setstatuspgm(const char* message)
  7964. {
  7965. if (lcd_status_message_level > 0)
  7966. return;
  7967. lcd_updatestatuspgm(message);
  7968. }
  7969. void lcd_updatestatus(const char *message){
  7970. strncpy(lcd_status_message, message, LCD_WIDTH);
  7971. lcd_status_message[LCD_WIDTH] = 0;
  7972. lcd_finishstatus();
  7973. // hack lcd_draw_update to 1, i.e. without clear
  7974. lcd_draw_update = 1;
  7975. }
  7976. void lcd_setalertstatuspgm(const char* message)
  7977. {
  7978. lcd_setstatuspgm(message);
  7979. lcd_status_message_level = 1;
  7980. lcd_return_to_status();
  7981. }
  7982. void lcd_setalertstatus(const char* message)
  7983. {
  7984. lcd_setstatus(message);
  7985. lcd_status_message_level = 1;
  7986. lcd_return_to_status();
  7987. }
  7988. void lcd_reset_alert_level()
  7989. {
  7990. lcd_status_message_level = 0;
  7991. }
  7992. uint8_t get_message_level()
  7993. {
  7994. return lcd_status_message_level;
  7995. }
  7996. void menu_lcd_longpress_func(void)
  7997. {
  7998. backlight_wake();
  7999. if (homing_flag || mesh_bed_leveling_flag || menu_menu == lcd_babystep_z || menu_menu == lcd_move_z)
  8000. {
  8001. // disable longpress during re-entry, while homing or calibration
  8002. lcd_quick_feedback();
  8003. return;
  8004. }
  8005. if (menu_menu == lcd_hw_setup_menu)
  8006. {
  8007. // only toggle the experimental menu visibility flag
  8008. lcd_quick_feedback();
  8009. lcd_experimental_toggle();
  8010. return;
  8011. }
  8012. // explicitely listed menus which are allowed to rise the move-z or live-adj-z functions
  8013. // The lists are not the same for both functions, so first decide which function is to be performed
  8014. if ( (moves_planned() || IS_SD_PRINTING || is_usb_printing )){ // long press as live-adj-z
  8015. if(( current_position[Z_AXIS] < Z_HEIGHT_HIDE_LIVE_ADJUST_MENU ) // only allow live-adj-z up to 2mm of print height
  8016. && ( menu_menu == lcd_status_screen // and in listed menus...
  8017. || menu_menu == lcd_main_menu
  8018. || menu_menu == lcd_tune_menu
  8019. || menu_menu == lcd_support_menu
  8020. )
  8021. ){
  8022. lcd_clear();
  8023. menu_submenu(lcd_babystep_z);
  8024. } else {
  8025. // otherwise consume the long press as normal click
  8026. if( menu_menu != lcd_status_screen )
  8027. menu_back();
  8028. }
  8029. } else { // long press as move-z
  8030. if(menu_menu == lcd_status_screen
  8031. || menu_menu == lcd_main_menu
  8032. || menu_menu == lcd_preheat_menu
  8033. || menu_menu == lcd_sdcard_menu
  8034. || menu_menu == lcd_settings_menu
  8035. || menu_menu == lcd_control_temperature_menu
  8036. #if (LANG_MODE != 0)
  8037. || menu_menu == lcd_language
  8038. #endif
  8039. || menu_menu == lcd_support_menu
  8040. ){
  8041. move_menu_scale = 1.0;
  8042. menu_submenu(lcd_move_z);
  8043. } else {
  8044. // otherwise consume the long press as normal click
  8045. if( menu_menu != lcd_status_screen )
  8046. menu_back();
  8047. }
  8048. }
  8049. }
  8050. void menu_lcd_charsetup_func(void)
  8051. {
  8052. if (menu_menu == lcd_status_screen)
  8053. lcd_set_custom_characters_degree();
  8054. else
  8055. lcd_set_custom_characters_arrows();
  8056. }
  8057. static inline bool z_menu_expired()
  8058. {
  8059. return (menu_menu == lcd_babystep_z
  8060. && lcd_timeoutToStatus.expired(LCD_TIMEOUT_TO_STATUS_BABYSTEP_Z));
  8061. }
  8062. static inline bool other_menu_expired()
  8063. {
  8064. return (menu_menu != lcd_status_screen
  8065. && menu_menu != lcd_babystep_z
  8066. && lcd_timeoutToStatus.expired(LCD_TIMEOUT_TO_STATUS));
  8067. }
  8068. static inline bool forced_menu_expire()
  8069. {
  8070. bool retval = (menu_menu != lcd_status_screen
  8071. && forceMenuExpire);
  8072. forceMenuExpire = false;
  8073. return retval;
  8074. }
  8075. void menu_lcd_lcdupdate_func(void)
  8076. {
  8077. #if (SDCARDDETECT > 0)
  8078. if ((IS_SD_INSERTED != lcd_oldcardstatus))
  8079. {
  8080. lcd_draw_update = 2;
  8081. lcd_oldcardstatus = IS_SD_INSERTED;
  8082. lcd_refresh(); // to maybe revive the LCD if static electricity killed it.
  8083. backlight_wake();
  8084. if (lcd_oldcardstatus)
  8085. {
  8086. card.initsd();
  8087. LCD_MESSAGERPGM(_T(WELCOME_MSG));
  8088. bMain=false; // flag (i.e. 'fake parameter') for 'lcd_sdcard_menu()' function
  8089. menu_submenu(lcd_sdcard_menu);
  8090. //get_description();
  8091. }
  8092. else
  8093. {
  8094. if(menu_menu==lcd_sdcard_menu)
  8095. menu_back();
  8096. card.release();
  8097. LCD_MESSAGERPGM(_i("Card removed"));////MSG_SD_REMOVED
  8098. }
  8099. }
  8100. #endif//CARDINSERTED
  8101. backlight_update();
  8102. if (lcd_next_update_millis < _millis())
  8103. {
  8104. if (abs(lcd_encoder_diff) >= ENCODER_PULSES_PER_STEP)
  8105. {
  8106. if (lcd_draw_update == 0)
  8107. lcd_draw_update = 1;
  8108. lcd_encoder += lcd_encoder_diff / ENCODER_PULSES_PER_STEP;
  8109. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  8110. lcd_encoder_diff = 0;
  8111. lcd_timeoutToStatus.start();
  8112. backlight_wake();
  8113. }
  8114. if (LCD_CLICKED)
  8115. {
  8116. lcd_timeoutToStatus.start();
  8117. backlight_wake();
  8118. }
  8119. (*menu_menu)();
  8120. if (z_menu_expired() || other_menu_expired() || forced_menu_expire())
  8121. {
  8122. // Exiting a menu. Let's call the menu function the last time with menu_leaving flag set to true
  8123. // to give it a chance to save its state.
  8124. // This is useful for example, when the babystep value has to be written into EEPROM.
  8125. if (menu_menu != NULL)
  8126. {
  8127. menu_leaving = 1;
  8128. (*menu_menu)();
  8129. menu_leaving = 0;
  8130. }
  8131. lcd_clear();
  8132. lcd_return_to_status();
  8133. lcd_draw_update = 2;
  8134. }
  8135. if (lcd_draw_update == 2) lcd_clear();
  8136. if (lcd_draw_update) lcd_draw_update--;
  8137. lcd_next_update_millis = _millis() + LCD_UPDATE_INTERVAL;
  8138. }
  8139. if (!SdFatUtil::test_stack_integrity()) stack_error();
  8140. lcd_ping(); //check that we have received ping command if we are in farm mode
  8141. lcd_send_status();
  8142. if (lcd_commands_type == LcdCommands::Layer1Cal) lcd_commands();
  8143. }
  8144. #ifdef TMC2130
  8145. //! @brief Is crash detection enabled?
  8146. //!
  8147. //! @retval true crash detection enabled
  8148. //! @retval false crash detection disabled
  8149. bool lcd_crash_detect_enabled()
  8150. {
  8151. return eeprom_read_byte((uint8_t*)EEPROM_CRASH_DET);
  8152. }
  8153. void lcd_crash_detect_enable()
  8154. {
  8155. tmc2130_sg_stop_on_crash = true;
  8156. eeprom_update_byte((uint8_t*)EEPROM_CRASH_DET, 0xFF);
  8157. }
  8158. void lcd_crash_detect_disable()
  8159. {
  8160. tmc2130_sg_stop_on_crash = false;
  8161. tmc2130_sg_crash = 0;
  8162. eeprom_update_byte((uint8_t*)EEPROM_CRASH_DET, 0x00);
  8163. }
  8164. #endif
  8165. void lcd_experimental_toggle()
  8166. {
  8167. uint8_t oldVal = eeprom_read_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY);
  8168. if (oldVal == EEPROM_EMPTY_VALUE)
  8169. oldVal = 0;
  8170. else
  8171. oldVal = !oldVal;
  8172. eeprom_update_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY, oldVal);
  8173. }
  8174. void lcd_experimental_menu()
  8175. {
  8176. MENU_BEGIN();
  8177. MENU_ITEM_BACK_P(_T(MSG_BACK));
  8178. #ifdef EXTRUDER_ALTFAN_DETECT
  8179. MENU_ITEM_TOGGLE_P(_N("ALTFAN det."), altfanOverride_get()?_T(MSG_OFF):_T(MSG_ON), altfanOverride_toggle);////MSG_MENU_ALTFAN c=18
  8180. #endif //EXTRUDER_ALTFAN_DETECT
  8181. MENU_END();
  8182. }