language_all.cpp 94 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126212721282129213021312132213321342135213621372138213921402141214221432144214521462147214821492150215121522153215421552156215721582159216021612162216321642165216621672168216921702171217221732174217521762177217821792180218121822183218421852186218721882189219021912192219321942195219621972198219922002201220222032204220522062207220822092210221122122213221422152216221722182219222022212222222322242225222622272228222922302231223222332234223522362237223822392240224122422243224422452246224722482249225022512252225322542255225622572258225922602261226222632264226522662267226822692270227122722273227422752276227722782279228022812282228322842285228622872288228922902291229222932294229522962297229822992300230123022303230423052306230723082309231023112312231323142315231623172318231923202321232223232324232523262327232823292330233123322333233423352336233723382339234023412342234323442345234623472348234923502351235223532354235523562357235823592360236123622363236423652366236723682369237023712372237323742375237623772378237923802381238223832384238523862387238823892390239123922393239423952396239723982399240024012402240324042405240624072408240924102411241224132414241524162417241824192420242124222423242424252426242724282429243024312432243324342435243624372438243924402441244224432444244524462447244824492450245124522453245424552456245724582459246024612462246324642465246624672468246924702471247224732474247524762477247824792480248124822483248424852486248724882489249024912492249324942495249624972498249925002501250225032504250525062507250825092510251125122513251425152516251725182519252025212522252325242525252625272528
  1. #include "Configuration_prusa.h"
  2. #include "language_all.h"
  3. #define LCD_WIDTH 20
  4. extern unsigned char lang_selected;
  5. const char MSG_ACTIVE_EXTRUDER_EN[] PROGMEM = "Active Extruder: ";
  6. const char * const MSG_ACTIVE_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  7. MSG_ACTIVE_EXTRUDER_EN
  8. };
  9. const char MSG_ADJUSTZ_EN[] PROGMEM = "Auto adjust Z?";
  10. const char MSG_ADJUSTZ_CZ[] PROGMEM = "Auto doladit Z ?";
  11. const char * const MSG_ADJUSTZ_LANG_TABLE[LANG_NUM] PROGMEM = {
  12. MSG_ADJUSTZ_EN,
  13. MSG_ADJUSTZ_CZ
  14. };
  15. const char MSG_ALL_EN[] PROGMEM = "All";
  16. const char MSG_ALL_CZ[] PROGMEM = "Vse";
  17. const char * const MSG_ALL_LANG_TABLE[LANG_NUM] PROGMEM = {
  18. MSG_ALL_EN,
  19. MSG_ALL_CZ
  20. };
  21. const char MSG_AMAX_EN[] PROGMEM = "Amax ";
  22. const char * const MSG_AMAX_LANG_TABLE[1] PROGMEM = {
  23. MSG_AMAX_EN
  24. };
  25. const char MSG_AUTHOR_EN[] PROGMEM = " | Author: ";
  26. const char * const MSG_AUTHOR_LANG_TABLE[1] PROGMEM = {
  27. MSG_AUTHOR_EN
  28. };
  29. const char MSG_AUTOLOADING_ENABLED_EN[] PROGMEM = "Autoloading filament is active, just press the knob and insert filament...";
  30. const char MSG_AUTOLOADING_ENABLED_CZ[] PROGMEM = "Automaticke zavadeni filamentu aktivni, stisknete tlacitko a vlozte filament...";
  31. const char * const MSG_AUTOLOADING_ENABLED_LANG_TABLE[LANG_NUM] PROGMEM = {
  32. MSG_AUTOLOADING_ENABLED_EN,
  33. MSG_AUTOLOADING_ENABLED_CZ
  34. };
  35. const char MSG_AUTOLOADING_ONLY_IF_FSENS_ON_EN[] PROGMEM = "Autoloading filament available only when filament sensor is turned on...";
  36. const char MSG_AUTOLOADING_ONLY_IF_FSENS_ON_CZ[] PROGMEM = "Automaticke zavadeni filamentu dostupne pouze pri zapnutem filament senzoru...";
  37. const char * const MSG_AUTOLOADING_ONLY_IF_FSENS_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  38. MSG_AUTOLOADING_ONLY_IF_FSENS_ON_EN,
  39. MSG_AUTOLOADING_ONLY_IF_FSENS_ON_CZ
  40. };
  41. const char MSG_AUTOLOAD_FILAMENT_EN[] PROGMEM = "AutoLoad filament";
  42. const char MSG_AUTOLOAD_FILAMENT_CZ[] PROGMEM = "AutoZavedeni fil.";
  43. const char * const MSG_AUTOLOAD_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  44. MSG_AUTOLOAD_FILAMENT_EN,
  45. MSG_AUTOLOAD_FILAMENT_CZ
  46. };
  47. const char MSG_AUTO_HOME_EN[] PROGMEM = "Auto home";
  48. const char * const MSG_AUTO_HOME_LANG_TABLE[1] PROGMEM = {
  49. MSG_AUTO_HOME_EN
  50. };
  51. const char MSG_A_RETRACT_EN[] PROGMEM = "A-retract";
  52. const char * const MSG_A_RETRACT_LANG_TABLE[1] PROGMEM = {
  53. MSG_A_RETRACT_EN
  54. };
  55. const char MSG_BABYSTEPPING_X_EN[] PROGMEM = "Babystepping X";
  56. const char * const MSG_BABYSTEPPING_X_LANG_TABLE[1] PROGMEM = {
  57. MSG_BABYSTEPPING_X_EN
  58. };
  59. const char MSG_BABYSTEPPING_Y_EN[] PROGMEM = "Babystepping Y";
  60. const char * const MSG_BABYSTEPPING_Y_LANG_TABLE[1] PROGMEM = {
  61. MSG_BABYSTEPPING_Y_EN
  62. };
  63. const char MSG_BABYSTEPPING_Z_EN[] PROGMEM = "Adjusting Z";
  64. const char * const MSG_BABYSTEPPING_Z_LANG_TABLE[1] PROGMEM = {
  65. MSG_BABYSTEPPING_Z_EN
  66. };
  67. const char MSG_BABYSTEP_X_EN[] PROGMEM = "Babystep X";
  68. const char * const MSG_BABYSTEP_X_LANG_TABLE[1] PROGMEM = {
  69. MSG_BABYSTEP_X_EN
  70. };
  71. const char MSG_BABYSTEP_Y_EN[] PROGMEM = "Babystep Y";
  72. const char * const MSG_BABYSTEP_Y_LANG_TABLE[1] PROGMEM = {
  73. MSG_BABYSTEP_Y_EN
  74. };
  75. const char MSG_BABYSTEP_Z_EN[] PROGMEM = "Live adjust Z";
  76. const char MSG_BABYSTEP_Z_CZ[] PROGMEM = "Doladeni osy Z";
  77. const char * const MSG_BABYSTEP_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
  78. MSG_BABYSTEP_Z_EN,
  79. MSG_BABYSTEP_Z_CZ
  80. };
  81. const char MSG_BABYSTEP_Z_NOT_SET_EN[] PROGMEM = "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration.";
  82. const char MSG_BABYSTEP_Z_NOT_SET_CZ[] PROGMEM = "Neni zkalibrovana vzdalenost trysky od tiskove podlozky. Postupujte prosim podle manualu, kapitola Zaciname, odstavec Nastaveni prvni vrstvy.";
  83. const char * const MSG_BABYSTEP_Z_NOT_SET_LANG_TABLE[LANG_NUM] PROGMEM = {
  84. MSG_BABYSTEP_Z_NOT_SET_EN,
  85. MSG_BABYSTEP_Z_NOT_SET_CZ
  86. };
  87. const char MSG_BED_EN[] PROGMEM = "Bed";
  88. const char * const MSG_BED_LANG_TABLE[1] PROGMEM = {
  89. MSG_BED_EN
  90. };
  91. const char MSG_BED_CORRECTION_FRONT_EN[] PROGMEM = "Front side[um]";
  92. const char MSG_BED_CORRECTION_FRONT_CZ[] PROGMEM = "Vpredu [um]";
  93. const char * const MSG_BED_CORRECTION_FRONT_LANG_TABLE[LANG_NUM] PROGMEM = {
  94. MSG_BED_CORRECTION_FRONT_EN,
  95. MSG_BED_CORRECTION_FRONT_CZ
  96. };
  97. const char MSG_BED_CORRECTION_LEFT_EN[] PROGMEM = "Left side [um]";
  98. const char MSG_BED_CORRECTION_LEFT_CZ[] PROGMEM = "Vlevo [um]";
  99. const char * const MSG_BED_CORRECTION_LEFT_LANG_TABLE[LANG_NUM] PROGMEM = {
  100. MSG_BED_CORRECTION_LEFT_EN,
  101. MSG_BED_CORRECTION_LEFT_CZ
  102. };
  103. const char MSG_BED_CORRECTION_MENU_EN[] PROGMEM = "Bed level correct";
  104. const char MSG_BED_CORRECTION_MENU_CZ[] PROGMEM = "Korekce podlozky";
  105. const char * const MSG_BED_CORRECTION_MENU_LANG_TABLE[LANG_NUM] PROGMEM = {
  106. MSG_BED_CORRECTION_MENU_EN,
  107. MSG_BED_CORRECTION_MENU_CZ
  108. };
  109. const char MSG_BED_CORRECTION_REAR_EN[] PROGMEM = "Rear side [um]";
  110. const char MSG_BED_CORRECTION_REAR_CZ[] PROGMEM = "Vzadu [um]";
  111. const char * const MSG_BED_CORRECTION_REAR_LANG_TABLE[LANG_NUM] PROGMEM = {
  112. MSG_BED_CORRECTION_REAR_EN,
  113. MSG_BED_CORRECTION_REAR_CZ
  114. };
  115. const char MSG_BED_CORRECTION_RESET_EN[] PROGMEM = "Reset";
  116. const char * const MSG_BED_CORRECTION_RESET_LANG_TABLE[1] PROGMEM = {
  117. MSG_BED_CORRECTION_RESET_EN
  118. };
  119. const char MSG_BED_CORRECTION_RIGHT_EN[] PROGMEM = "Right side[um]";
  120. const char MSG_BED_CORRECTION_RIGHT_CZ[] PROGMEM = "Vpravo [um]";
  121. const char * const MSG_BED_CORRECTION_RIGHT_LANG_TABLE[LANG_NUM] PROGMEM = {
  122. MSG_BED_CORRECTION_RIGHT_EN,
  123. MSG_BED_CORRECTION_RIGHT_CZ
  124. };
  125. const char MSG_BED_DONE_EN[] PROGMEM = "Bed done";
  126. const char MSG_BED_DONE_CZ[] PROGMEM = "Bed OK.";
  127. const char * const MSG_BED_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
  128. MSG_BED_DONE_EN,
  129. MSG_BED_DONE_CZ
  130. };
  131. const char MSG_BED_HEATING_EN[] PROGMEM = "Bed Heating";
  132. const char MSG_BED_HEATING_CZ[] PROGMEM = "Zahrivani bed";
  133. const char * const MSG_BED_HEATING_LANG_TABLE[LANG_NUM] PROGMEM = {
  134. MSG_BED_HEATING_EN,
  135. MSG_BED_HEATING_CZ
  136. };
  137. const char MSG_BED_LEVELING_FAILED_POINT_HIGH_EN[] PROGMEM = "Bed leveling failed. Sensor triggered too high. Waiting for reset.";
  138. const char MSG_BED_LEVELING_FAILED_POINT_HIGH_CZ[] PROGMEM = "Kalibrace Z selhala. Sensor sepnul prilis vysoko. Cekam na reset.";
  139. const char * const MSG_BED_LEVELING_FAILED_POINT_HIGH_LANG_TABLE[LANG_NUM] PROGMEM = {
  140. MSG_BED_LEVELING_FAILED_POINT_HIGH_EN,
  141. MSG_BED_LEVELING_FAILED_POINT_HIGH_CZ
  142. };
  143. const char MSG_BED_LEVELING_FAILED_POINT_LOW_EN[] PROGMEM = "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset.";
  144. const char MSG_BED_LEVELING_FAILED_POINT_LOW_CZ[] PROGMEM = "Kalibrace Z selhala. Sensor nesepnul. Znecistena tryska? Cekam na reset.";
  145. const char * const MSG_BED_LEVELING_FAILED_POINT_LOW_LANG_TABLE[LANG_NUM] PROGMEM = {
  146. MSG_BED_LEVELING_FAILED_POINT_LOW_EN,
  147. MSG_BED_LEVELING_FAILED_POINT_LOW_CZ
  148. };
  149. const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_EN[] PROGMEM = "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset.";
  150. const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_CZ[] PROGMEM = "Kalibrace Z selhala. Sensor je odpojeny nebo preruseny kabel. Cekam na reset.";
  151. const char * const MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_LANG_TABLE[LANG_NUM] PROGMEM = {
  152. MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_EN,
  153. MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_CZ
  154. };
  155. const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_EN[] PROGMEM = "XYZ calibration failed. Front calibration points not reachable.";
  156. const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_CZ[] PROGMEM = "Kalibrace XYZ selhala. Predni kalibracni body moc vpredu. Srovnejte tiskarnu.";
  157. const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
  158. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_EN,
  159. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_CZ
  160. };
  161. const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_EN[] PROGMEM = "XYZ calibration failed. Left front calibration point not reachable.";
  162. const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_CZ[] PROGMEM = "Kalibrace XYZ selhala. Levy predni bod moc vpredu. Srovnejte tiskarnu.";
  163. const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
  164. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_EN,
  165. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_CZ
  166. };
  167. const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_EN[] PROGMEM = "XYZ calibration failed. Right front calibration point not reachable.";
  168. const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_CZ[] PROGMEM = "Kalibrace XYZ selhala. Pravy predni bod moc vpredu. Srovnejte tiskarnu.";
  169. const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
  170. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_EN,
  171. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_CZ
  172. };
  173. const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_EN[] PROGMEM = "XYZ calibration failed. Please consult the manual.";
  174. const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_CZ[] PROGMEM = "Kalibrace XYZ selhala. Nahlednete do manualu.";
  175. const char * const MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_LANG_TABLE[LANG_NUM] PROGMEM = {
  176. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_EN,
  177. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_CZ
  178. };
  179. const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_EN[] PROGMEM = "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!";
  180. const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_CZ[] PROGMEM = "Kalibrace XYZ v poradku. X/Y osy jsou kolme. Gratuluji!";
  181. const char * const MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_LANG_TABLE[LANG_NUM] PROGMEM = {
  182. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_EN,
  183. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_CZ
  184. };
  185. const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_EN[] PROGMEM = "XYZ calibration failed. Bed calibration point was not found.";
  186. const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_CZ[] PROGMEM = "Kalibrace XYZ selhala. Kalibracni bod podlozky nenalezen.";
  187. const char * const MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_LANG_TABLE[LANG_NUM] PROGMEM = {
  188. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_EN,
  189. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_CZ
  190. };
  191. const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_EN[] PROGMEM = "XYZ calibration all right. Skew will be corrected automatically.";
  192. const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_CZ[] PROGMEM = "Kalibrace XYZ v poradku. Zkoseni bude automaticky vyrovnano pri tisku.";
  193. const char * const MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_LANG_TABLE[LANG_NUM] PROGMEM = {
  194. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_EN,
  195. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_CZ
  196. };
  197. const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_EN[] PROGMEM = "XYZ calibration all right. X/Y axes are slightly skewed. Good job!";
  198. const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_CZ[] PROGMEM = "Kalibrace XYZ v poradku. X/Y osy mirne zkosene. Dobra prace!";
  199. const char * const MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_LANG_TABLE[LANG_NUM] PROGMEM = {
  200. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_EN,
  201. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_CZ
  202. };
  203. const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_EN[] PROGMEM = "XYZ calibration compromised. Front calibration points not reachable.";
  204. const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_CZ[] PROGMEM = "Kalibrace XYZ nepresna. Predni kalibracni body moc vpredu.";
  205. const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
  206. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_EN,
  207. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_CZ
  208. };
  209. const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_EN[] PROGMEM = "XYZ calibration compromised. Left front calibration point not reachable.";
  210. const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_CZ[] PROGMEM = "Kalibrace XYZ nepresna. Levy predni bod moc vpredu.";
  211. const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
  212. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_EN,
  213. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_CZ
  214. };
  215. const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_EN[] PROGMEM = "XYZ calibration compromised. Right front calibration point not reachable.";
  216. const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_CZ[] PROGMEM = "Kalibrace XYZ nepresna. Pravy predni bod moc vpredu.";
  217. const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
  218. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_EN,
  219. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_CZ
  220. };
  221. const char MSG_BEGIN_FILE_LIST_EN[] PROGMEM = "Begin file list";
  222. const char * const MSG_BEGIN_FILE_LIST_LANG_TABLE[1] PROGMEM = {
  223. MSG_BEGIN_FILE_LIST_EN
  224. };
  225. const char MSG_BROWNOUT_RESET_EN[] PROGMEM = " Brown out Reset";
  226. const char * const MSG_BROWNOUT_RESET_LANG_TABLE[1] PROGMEM = {
  227. MSG_BROWNOUT_RESET_EN
  228. };
  229. const char MSG_CALIBRATE_BED_EN[] PROGMEM = "Calibrate XYZ";
  230. const char MSG_CALIBRATE_BED_CZ[] PROGMEM = "Kalibrace XYZ";
  231. const char * const MSG_CALIBRATE_BED_LANG_TABLE[LANG_NUM] PROGMEM = {
  232. MSG_CALIBRATE_BED_EN,
  233. MSG_CALIBRATE_BED_CZ
  234. };
  235. const char MSG_CALIBRATE_BED_RESET_EN[] PROGMEM = "Reset XYZ calibr.";
  236. const char MSG_CALIBRATE_BED_RESET_CZ[] PROGMEM = "Reset XYZ kalibr.";
  237. const char * const MSG_CALIBRATE_BED_RESET_LANG_TABLE[LANG_NUM] PROGMEM = {
  238. MSG_CALIBRATE_BED_RESET_EN,
  239. MSG_CALIBRATE_BED_RESET_CZ
  240. };
  241. const char MSG_CALIBRATE_E_EN[] PROGMEM = "Calibrate E";
  242. const char MSG_CALIBRATE_E_CZ[] PROGMEM = "Kalibrovat E";
  243. const char * const MSG_CALIBRATE_E_LANG_TABLE[LANG_NUM] PROGMEM = {
  244. MSG_CALIBRATE_E_EN,
  245. MSG_CALIBRATE_E_CZ
  246. };
  247. const char MSG_CALIBRATE_PINDA_EN[] PROGMEM = "Calibrate";
  248. const char MSG_CALIBRATE_PINDA_CZ[] PROGMEM = "Zkalibrovat";
  249. const char * const MSG_CALIBRATE_PINDA_LANG_TABLE[LANG_NUM] PROGMEM = {
  250. MSG_CALIBRATE_PINDA_EN,
  251. MSG_CALIBRATE_PINDA_CZ
  252. };
  253. const char MSG_CALIBRATE_Z_AUTO_EN[] PROGMEM = "Calibrating Z";
  254. const char MSG_CALIBRATE_Z_AUTO_CZ[] PROGMEM = "Kalibruji Z";
  255. const char * const MSG_CALIBRATE_Z_AUTO_LANG_TABLE[LANG_NUM] PROGMEM = {
  256. MSG_CALIBRATE_Z_AUTO_EN,
  257. MSG_CALIBRATE_Z_AUTO_CZ
  258. };
  259. const char MSG_CALIBRATION_PINDA_MENU_EN[] PROGMEM = "Temp. calibration";
  260. const char MSG_CALIBRATION_PINDA_MENU_CZ[] PROGMEM = "Teplot. kalibrace";
  261. const char * const MSG_CALIBRATION_PINDA_MENU_LANG_TABLE[LANG_NUM] PROGMEM = {
  262. MSG_CALIBRATION_PINDA_MENU_EN,
  263. MSG_CALIBRATION_PINDA_MENU_CZ
  264. };
  265. const char MSG_CARD_MENU_EN[] PROGMEM = "Print from SD";
  266. const char MSG_CARD_MENU_CZ[] PROGMEM = "Tisk z SD";
  267. const char * const MSG_CARD_MENU_LANG_TABLE[LANG_NUM] PROGMEM = {
  268. MSG_CARD_MENU_EN,
  269. MSG_CARD_MENU_CZ
  270. };
  271. const char MSG_CHANGE_EXTR_EN[] PROGMEM = "Change extruder";
  272. const char MSG_CHANGE_EXTR_CZ[] PROGMEM = "Zmenit extruder";
  273. const char * const MSG_CHANGE_EXTR_LANG_TABLE[LANG_NUM] PROGMEM = {
  274. MSG_CHANGE_EXTR_EN,
  275. MSG_CHANGE_EXTR_CZ
  276. };
  277. const char MSG_CHANGE_SUCCESS_EN[] PROGMEM = "Change success!";
  278. const char MSG_CHANGE_SUCCESS_CZ[] PROGMEM = "Zmena uspesna!";
  279. const char * const MSG_CHANGE_SUCCESS_LANG_TABLE[LANG_NUM] PROGMEM = {
  280. MSG_CHANGE_SUCCESS_EN,
  281. MSG_CHANGE_SUCCESS_CZ
  282. };
  283. const char MSG_CHANGING_FILAMENT_EN[] PROGMEM = "Changing filament!";
  284. const char MSG_CHANGING_FILAMENT_CZ[] PROGMEM = "Vymena filamentu!";
  285. const char * const MSG_CHANGING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  286. MSG_CHANGING_FILAMENT_EN,
  287. MSG_CHANGING_FILAMENT_CZ
  288. };
  289. const char MSG_CHECK_IDLER_EN[] PROGMEM = "Please open idler and remove filament manually.";
  290. const char MSG_CHECK_IDLER_CZ[] PROGMEM = "Prosim otevrete idler a manualne odstrante filament.";
  291. const char * const MSG_CHECK_IDLER_LANG_TABLE[LANG_NUM] PROGMEM = {
  292. MSG_CHECK_IDLER_EN,
  293. MSG_CHECK_IDLER_CZ
  294. };
  295. const char MSG_CHOOSE_EXTRUDER_EN[] PROGMEM = "Choose extruder:";
  296. const char MSG_CHOOSE_EXTRUDER_CZ[] PROGMEM = "Vyberte extruder:";
  297. const char * const MSG_CHOOSE_EXTRUDER_LANG_TABLE[LANG_NUM] PROGMEM = {
  298. MSG_CHOOSE_EXTRUDER_EN,
  299. MSG_CHOOSE_EXTRUDER_CZ
  300. };
  301. const char MSG_CLEAN_NOZZLE_E_EN[] PROGMEM = "E calibration finished. Please clean the nozzle. Click when done.";
  302. const char MSG_CLEAN_NOZZLE_E_CZ[] PROGMEM = "E kalibrace ukoncena. Prosim ocistete trysku. Po te potvrdte tlacitkem.";
  303. const char * const MSG_CLEAN_NOZZLE_E_LANG_TABLE[LANG_NUM] PROGMEM = {
  304. MSG_CLEAN_NOZZLE_E_EN,
  305. MSG_CLEAN_NOZZLE_E_CZ
  306. };
  307. const char MSG_CNG_SDCARD_EN[] PROGMEM = "Change SD card";
  308. const char * const MSG_CNG_SDCARD_LANG_TABLE[1] PROGMEM = {
  309. MSG_CNG_SDCARD_EN
  310. };
  311. const char MSG_CONFIGURATION_VER_EN[] PROGMEM = " Last Updated: ";
  312. const char * const MSG_CONFIGURATION_VER_LANG_TABLE[1] PROGMEM = {
  313. MSG_CONFIGURATION_VER_EN
  314. };
  315. const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_EN[] PROGMEM = "Are left and right Z~carriages all up?";
  316. const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_CZ[] PROGMEM = "Dojely oba Z voziky k~hornimu dorazu?";
  317. const char * const MSG_CONFIRM_CARRIAGE_AT_THE_TOP_LANG_TABLE[LANG_NUM] PROGMEM = {
  318. MSG_CONFIRM_CARRIAGE_AT_THE_TOP_EN,
  319. MSG_CONFIRM_CARRIAGE_AT_THE_TOP_CZ
  320. };
  321. const char MSG_CONFIRM_NOZZLE_CLEAN_EN[] PROGMEM = "Please clean the nozzle for calibration. Click when done.";
  322. const char MSG_CONFIRM_NOZZLE_CLEAN_CZ[] PROGMEM = "Pro uspesnou kalibraci ocistete prosim tiskovou trysku. Potvrdte tlacitkem.";
  323. const char * const MSG_CONFIRM_NOZZLE_CLEAN_LANG_TABLE[LANG_NUM] PROGMEM = {
  324. MSG_CONFIRM_NOZZLE_CLEAN_EN,
  325. MSG_CONFIRM_NOZZLE_CLEAN_CZ
  326. };
  327. const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_EN[] PROGMEM = "Filaments are now adjusted. Please clean the nozzle for calibration. Click when done.";
  328. const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_CZ[] PROGMEM = "Filamenty jsou srovnany. Pro uspesnou kalibraci prosim ocistete trysku. Po te potvrdte tlacitkem.";
  329. const char * const MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_LANG_TABLE[LANG_NUM] PROGMEM = {
  330. MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_EN,
  331. MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_CZ
  332. };
  333. const char MSG_CONTROL_EN[] PROGMEM = "Control";
  334. const char * const MSG_CONTROL_LANG_TABLE[1] PROGMEM = {
  335. MSG_CONTROL_EN
  336. };
  337. const char MSG_COOLDOWN_EN[] PROGMEM = "Cooldown";
  338. const char MSG_COOLDOWN_CZ[] PROGMEM = "Zchladit";
  339. const char * const MSG_COOLDOWN_LANG_TABLE[LANG_NUM] PROGMEM = {
  340. MSG_COOLDOWN_EN,
  341. MSG_COOLDOWN_CZ
  342. };
  343. const char MSG_CORRECTLY_EN[] PROGMEM = "Changed correctly?";
  344. const char MSG_CORRECTLY_CZ[] PROGMEM = "Vymena ok?";
  345. const char * const MSG_CORRECTLY_LANG_TABLE[LANG_NUM] PROGMEM = {
  346. MSG_CORRECTLY_EN,
  347. MSG_CORRECTLY_CZ
  348. };
  349. const char MSG_COUNT_X_EN[] PROGMEM = " Count X: ";
  350. const char * const MSG_COUNT_X_LANG_TABLE[1] PROGMEM = {
  351. MSG_COUNT_X_EN
  352. };
  353. const char MSG_CRASHDETECT_NA_EN[] PROGMEM = "Crash det. [N/A]";
  354. const char * const MSG_CRASHDETECT_NA_LANG_TABLE[1] PROGMEM = {
  355. MSG_CRASHDETECT_NA_EN
  356. };
  357. const char MSG_CRASHDETECT_OFF_EN[] PROGMEM = "Crash det. [off]";
  358. const char MSG_CRASHDETECT_OFF_CZ[] PROGMEM = "Crash det. [vyp]";
  359. const char * const MSG_CRASHDETECT_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  360. MSG_CRASHDETECT_OFF_EN,
  361. MSG_CRASHDETECT_OFF_CZ
  362. };
  363. const char MSG_CRASHDETECT_ON_EN[] PROGMEM = "Crash det. [on]";
  364. const char MSG_CRASHDETECT_ON_CZ[] PROGMEM = "Crash det. [zap]";
  365. const char * const MSG_CRASHDETECT_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  366. MSG_CRASHDETECT_ON_EN,
  367. MSG_CRASHDETECT_ON_CZ
  368. };
  369. const char MSG_CRASH_DETECTED_EN[] PROGMEM = "Crash detected.";
  370. const char MSG_CRASH_DETECTED_CZ[] PROGMEM = "Detekovan naraz.";
  371. const char * const MSG_CRASH_DETECTED_LANG_TABLE[LANG_NUM] PROGMEM = {
  372. MSG_CRASH_DETECTED_EN,
  373. MSG_CRASH_DETECTED_CZ
  374. };
  375. const char MSG_CRASH_DETECTED2_EN[] PROGMEM = "Crash detected. Continue printing?";
  376. const char MSG_CRASH_DETECTED2_CZ[] PROGMEM = "Naraz detekovan, pokracovat v tisku?";
  377. const char * const MSG_CRASH_DETECTED2_LANG_TABLE[LANG_NUM] PROGMEM = {
  378. MSG_CRASH_DETECTED2_EN,
  379. MSG_CRASH_DETECTED2_CZ
  380. };
  381. const char MSG_CRASH_DET_ONLY_IN_NORMAL_EN[] PROGMEM = "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode";
  382. const char MSG_CRASH_DET_ONLY_IN_NORMAL_CZ[] PROGMEM = "\x1b[2JCrash detekce muze\x1b[1;0Hbyt zapnuta pouze v\x1b[2;0HNormal modu";
  383. const char * const MSG_CRASH_DET_ONLY_IN_NORMAL_LANG_TABLE[LANG_NUM] PROGMEM = {
  384. MSG_CRASH_DET_ONLY_IN_NORMAL_EN,
  385. MSG_CRASH_DET_ONLY_IN_NORMAL_CZ
  386. };
  387. const char MSG_CRASH_DET_STEALTH_FORCE_OFF_EN[] PROGMEM = "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode";
  388. const char MSG_CRASH_DET_STEALTH_FORCE_OFF_CZ[] PROGMEM = "\x1b[2JPOZOR:\x1b[1;0HCrash detekce\x1b[2;0Hdeaktivovana ve\x1b[3;0HStealth modu";
  389. const char * const MSG_CRASH_DET_STEALTH_FORCE_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  390. MSG_CRASH_DET_STEALTH_FORCE_OFF_EN,
  391. MSG_CRASH_DET_STEALTH_FORCE_OFF_CZ
  392. };
  393. const char MSG_CURRENT_EN[] PROGMEM = "Current";
  394. const char MSG_CURRENT_CZ[] PROGMEM = "Pouze aktualni";
  395. const char * const MSG_CURRENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  396. MSG_CURRENT_EN,
  397. MSG_CURRENT_CZ
  398. };
  399. const char MSG_DATE_EN[] PROGMEM = "Date:";
  400. const char MSG_DATE_CZ[] PROGMEM = "Datum:";
  401. const char * const MSG_DATE_LANG_TABLE[LANG_NUM] PROGMEM = {
  402. MSG_DATE_EN,
  403. MSG_DATE_CZ
  404. };
  405. const char MSG_DEFAULT_SETTINGS_LOADED_EN[] PROGMEM = "Default settings loaded";
  406. const char * const MSG_DEFAULT_SETTINGS_LOADED_LANG_TABLE[1] PROGMEM = {
  407. MSG_DEFAULT_SETTINGS_LOADED_EN
  408. };
  409. const char MSG_DISABLE_STEPPERS_EN[] PROGMEM = "Disable steppers";
  410. const char MSG_DISABLE_STEPPERS_CZ[] PROGMEM = "Vypnout motory";
  411. const char * const MSG_DISABLE_STEPPERS_LANG_TABLE[LANG_NUM] PROGMEM = {
  412. MSG_DISABLE_STEPPERS_EN,
  413. MSG_DISABLE_STEPPERS_CZ
  414. };
  415. const char MSG_DWELL_EN[] PROGMEM = "Sleep...";
  416. const char * const MSG_DWELL_LANG_TABLE[1] PROGMEM = {
  417. MSG_DWELL_EN
  418. };
  419. const char MSG_ENDSTOPS_HIT_EN[] PROGMEM = "endstops hit: ";
  420. const char * const MSG_ENDSTOPS_HIT_LANG_TABLE[1] PROGMEM = {
  421. MSG_ENDSTOPS_HIT_EN
  422. };
  423. const char MSG_ENDSTOP_HIT_EN[] PROGMEM = "TRIGGERED";
  424. const char * const MSG_ENDSTOP_HIT_LANG_TABLE[1] PROGMEM = {
  425. MSG_ENDSTOP_HIT_EN
  426. };
  427. const char MSG_ENDSTOP_OPEN_EN[] PROGMEM = "open";
  428. const char * const MSG_ENDSTOP_OPEN_LANG_TABLE[1] PROGMEM = {
  429. MSG_ENDSTOP_OPEN_EN
  430. };
  431. const char MSG_END_FILE_LIST_EN[] PROGMEM = "End file list";
  432. const char * const MSG_END_FILE_LIST_LANG_TABLE[1] PROGMEM = {
  433. MSG_END_FILE_LIST_EN
  434. };
  435. const char MSG_ERROR_EN[] PROGMEM = "ERROR:";
  436. const char MSG_ERROR_CZ[] PROGMEM = "CHYBA:";
  437. const char * const MSG_ERROR_LANG_TABLE[LANG_NUM] PROGMEM = {
  438. MSG_ERROR_EN,
  439. MSG_ERROR_CZ
  440. };
  441. const char MSG_ERR_CHECKSUM_MISMATCH_EN[] PROGMEM = "checksum mismatch, Last Line: ";
  442. const char * const MSG_ERR_CHECKSUM_MISMATCH_LANG_TABLE[1] PROGMEM = {
  443. MSG_ERR_CHECKSUM_MISMATCH_EN
  444. };
  445. const char MSG_ERR_COLD_EXTRUDE_STOP_EN[] PROGMEM = " cold extrusion prevented";
  446. const char * const MSG_ERR_COLD_EXTRUDE_STOP_LANG_TABLE[1] PROGMEM = {
  447. MSG_ERR_COLD_EXTRUDE_STOP_EN
  448. };
  449. const char MSG_ERR_KILLED_EN[] PROGMEM = "Printer halted. kill() called!";
  450. const char * const MSG_ERR_KILLED_LANG_TABLE[1] PROGMEM = {
  451. MSG_ERR_KILLED_EN
  452. };
  453. const char MSG_ERR_LINE_NO_EN[] PROGMEM = "Line Number is not Last Line Number+1, Last Line: ";
  454. const char * const MSG_ERR_LINE_NO_LANG_TABLE[1] PROGMEM = {
  455. MSG_ERR_LINE_NO_EN
  456. };
  457. const char MSG_ERR_LONG_EXTRUDE_STOP_EN[] PROGMEM = " too long extrusion prevented";
  458. const char * const MSG_ERR_LONG_EXTRUDE_STOP_LANG_TABLE[1] PROGMEM = {
  459. MSG_ERR_LONG_EXTRUDE_STOP_EN
  460. };
  461. const char MSG_ERR_NO_CHECKSUM_EN[] PROGMEM = "No Checksum with line number, Last Line: ";
  462. const char * const MSG_ERR_NO_CHECKSUM_LANG_TABLE[1] PROGMEM = {
  463. MSG_ERR_NO_CHECKSUM_EN
  464. };
  465. const char MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM_EN[] PROGMEM = "No Line Number with checksum, Last Line: ";
  466. const char * const MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM_LANG_TABLE[1] PROGMEM = {
  467. MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM_EN
  468. };
  469. const char MSG_ERR_NO_THERMISTORS_EN[] PROGMEM = "No thermistors - no temperature";
  470. const char * const MSG_ERR_NO_THERMISTORS_LANG_TABLE[1] PROGMEM = {
  471. MSG_ERR_NO_THERMISTORS_EN
  472. };
  473. const char MSG_ERR_STOPPED_EN[] PROGMEM = "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)";
  474. const char * const MSG_ERR_STOPPED_LANG_TABLE[1] PROGMEM = {
  475. MSG_ERR_STOPPED_EN
  476. };
  477. const char MSG_EXTERNAL_RESET_EN[] PROGMEM = " External Reset";
  478. const char * const MSG_EXTERNAL_RESET_LANG_TABLE[1] PROGMEM = {
  479. MSG_EXTERNAL_RESET_EN
  480. };
  481. const char MSG_EXTRUDER_EN[] PROGMEM = "Extruder";
  482. const char * const MSG_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  483. MSG_EXTRUDER_EN
  484. };
  485. const char MSG_EXTRUDER_1_EN[] PROGMEM = "Extruder 1";
  486. const char * const MSG_EXTRUDER_1_LANG_TABLE[1] PROGMEM = {
  487. MSG_EXTRUDER_1_EN
  488. };
  489. const char MSG_EXTRUDER_2_EN[] PROGMEM = "Extruder 2";
  490. const char * const MSG_EXTRUDER_2_LANG_TABLE[1] PROGMEM = {
  491. MSG_EXTRUDER_2_EN
  492. };
  493. const char MSG_EXTRUDER_3_EN[] PROGMEM = "Extruder 3";
  494. const char * const MSG_EXTRUDER_3_LANG_TABLE[1] PROGMEM = {
  495. MSG_EXTRUDER_3_EN
  496. };
  497. const char MSG_EXTRUDER_4_EN[] PROGMEM = "Extruder 4";
  498. const char * const MSG_EXTRUDER_4_LANG_TABLE[1] PROGMEM = {
  499. MSG_EXTRUDER_4_EN
  500. };
  501. const char MSG_E_CAL_KNOB_EN[] PROGMEM = "Rotate knob until mark reaches extruder body. Click when done.";
  502. const char MSG_E_CAL_KNOB_CZ[] PROGMEM = "Otacejte tlacitkem dokud znacka nedosahne tela extruderu. Potvrdte tlacitkem.";
  503. const char * const MSG_E_CAL_KNOB_LANG_TABLE[LANG_NUM] PROGMEM = {
  504. MSG_E_CAL_KNOB_EN,
  505. MSG_E_CAL_KNOB_CZ
  506. };
  507. const char MSG_Enqueing_EN[] PROGMEM = "enqueing \"";
  508. const char * const MSG_Enqueing_LANG_TABLE[1] PROGMEM = {
  509. MSG_Enqueing_EN
  510. };
  511. const char MSG_FACTOR_EN[] PROGMEM = " \002 Fact";
  512. const char * const MSG_FACTOR_LANG_TABLE[1] PROGMEM = {
  513. MSG_FACTOR_EN
  514. };
  515. const char MSG_FANS_CHECK_OFF_EN[] PROGMEM = "Fans check [off]";
  516. const char MSG_FANS_CHECK_OFF_CZ[] PROGMEM = "Kontr. vent.[vyp]";
  517. const char * const MSG_FANS_CHECK_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  518. MSG_FANS_CHECK_OFF_EN,
  519. MSG_FANS_CHECK_OFF_CZ
  520. };
  521. const char MSG_FANS_CHECK_ON_EN[] PROGMEM = "Fans check [on]";
  522. const char MSG_FANS_CHECK_ON_CZ[] PROGMEM = "Kontr. vent.[zap]";
  523. const char * const MSG_FANS_CHECK_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  524. MSG_FANS_CHECK_ON_EN,
  525. MSG_FANS_CHECK_ON_CZ
  526. };
  527. const char MSG_FAN_SPEED_EN[] PROGMEM = "Fan speed";
  528. const char MSG_FAN_SPEED_CZ[] PROGMEM = "Rychlost vent.";
  529. const char * const MSG_FAN_SPEED_LANG_TABLE[LANG_NUM] PROGMEM = {
  530. MSG_FAN_SPEED_EN,
  531. MSG_FAN_SPEED_CZ
  532. };
  533. const char MSG_FARM_CARD_MENU_EN[] PROGMEM = "Farm mode print";
  534. const char * const MSG_FARM_CARD_MENU_LANG_TABLE[1] PROGMEM = {
  535. MSG_FARM_CARD_MENU_EN
  536. };
  537. const char MSG_FILAMENTCHANGE_EN[] PROGMEM = "Change filament";
  538. const char MSG_FILAMENTCHANGE_CZ[] PROGMEM = "Vymenit filament";
  539. const char * const MSG_FILAMENTCHANGE_LANG_TABLE[LANG_NUM] PROGMEM = {
  540. MSG_FILAMENTCHANGE_EN,
  541. MSG_FILAMENTCHANGE_CZ
  542. };
  543. const char MSG_FILAMENT_CLEAN_EN[] PROGMEM = "Filament extruding & with correct color?";
  544. const char MSG_FILAMENT_CLEAN_CZ[] PROGMEM = "Filament vytlacen a spravne barvy?";
  545. const char * const MSG_FILAMENT_CLEAN_LANG_TABLE[LANG_NUM] PROGMEM = {
  546. MSG_FILAMENT_CLEAN_EN,
  547. MSG_FILAMENT_CLEAN_CZ
  548. };
  549. const char MSG_FILAMENT_LOADING_T0_EN[] PROGMEM = "Insert filament into extruder 1. Click when done.";
  550. const char MSG_FILAMENT_LOADING_T0_CZ[] PROGMEM = "Vlozte filament do extruderu 1. Potvrdte tlacitkem.";
  551. const char * const MSG_FILAMENT_LOADING_T0_LANG_TABLE[LANG_NUM] PROGMEM = {
  552. MSG_FILAMENT_LOADING_T0_EN,
  553. MSG_FILAMENT_LOADING_T0_CZ
  554. };
  555. const char MSG_FILAMENT_LOADING_T1_EN[] PROGMEM = "Insert filament into extruder 2. Click when done.";
  556. const char MSG_FILAMENT_LOADING_T1_CZ[] PROGMEM = "Vlozte filament do extruderu 2. Potvrdte tlacitkem.";
  557. const char * const MSG_FILAMENT_LOADING_T1_LANG_TABLE[LANG_NUM] PROGMEM = {
  558. MSG_FILAMENT_LOADING_T1_EN,
  559. MSG_FILAMENT_LOADING_T1_CZ
  560. };
  561. const char MSG_FILAMENT_LOADING_T2_EN[] PROGMEM = "Insert filament into extruder 3. Click when done.";
  562. const char MSG_FILAMENT_LOADING_T2_CZ[] PROGMEM = "Vlozte filament do extruderu 3. Potvrdte tlacitkem.";
  563. const char * const MSG_FILAMENT_LOADING_T2_LANG_TABLE[LANG_NUM] PROGMEM = {
  564. MSG_FILAMENT_LOADING_T2_EN,
  565. MSG_FILAMENT_LOADING_T2_CZ
  566. };
  567. const char MSG_FILAMENT_LOADING_T3_EN[] PROGMEM = "Insert filament into extruder 4. Click when done.";
  568. const char MSG_FILAMENT_LOADING_T3_CZ[] PROGMEM = "Vlozte filament do extruderu 4. Potvrdte tlacitkem.";
  569. const char * const MSG_FILAMENT_LOADING_T3_LANG_TABLE[LANG_NUM] PROGMEM = {
  570. MSG_FILAMENT_LOADING_T3_EN,
  571. MSG_FILAMENT_LOADING_T3_CZ
  572. };
  573. const char MSG_FILAMENT_SENSOR_EN[] PROGMEM = "Filament sensor";
  574. const char MSG_FILAMENT_SENSOR_CZ[] PROGMEM = "Senzor filamentu";
  575. const char * const MSG_FILAMENT_SENSOR_LANG_TABLE[LANG_NUM] PROGMEM = {
  576. MSG_FILAMENT_SENSOR_EN,
  577. MSG_FILAMENT_SENSOR_CZ
  578. };
  579. const char MSG_FILE_CNT_EN[] PROGMEM = "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100.";
  580. const char MSG_FILE_CNT_CZ[] PROGMEM = "Nektere soubory nebudou setrideny. Maximalni pocet souboru pro setrideni je 100.";
  581. const char * const MSG_FILE_CNT_LANG_TABLE[LANG_NUM] PROGMEM = {
  582. MSG_FILE_CNT_EN,
  583. MSG_FILE_CNT_CZ
  584. };
  585. const char MSG_FILE_INCOMPLETE_EN[] PROGMEM = "File incomplete. Continue anyway?";
  586. const char MSG_FILE_INCOMPLETE_CZ[] PROGMEM = "Soubor nekompletni. Pokracovat?";
  587. const char * const MSG_FILE_INCOMPLETE_LANG_TABLE[LANG_NUM] PROGMEM = {
  588. MSG_FILE_INCOMPLETE_EN,
  589. MSG_FILE_INCOMPLETE_CZ
  590. };
  591. const char MSG_FILE_PRINTED_EN[] PROGMEM = "Done printing file";
  592. const char * const MSG_FILE_PRINTED_LANG_TABLE[1] PROGMEM = {
  593. MSG_FILE_PRINTED_EN
  594. };
  595. const char MSG_FILE_SAVED_EN[] PROGMEM = "Done saving file.";
  596. const char * const MSG_FILE_SAVED_LANG_TABLE[1] PROGMEM = {
  597. MSG_FILE_SAVED_EN
  598. };
  599. const char MSG_FIL_ADJUSTING_EN[] PROGMEM = "Adjusting filaments. Please wait.";
  600. const char MSG_FIL_ADJUSTING_CZ[] PROGMEM = "Probiha srovnani filamentu. Prosim cekejte.";
  601. const char * const MSG_FIL_ADJUSTING_LANG_TABLE[LANG_NUM] PROGMEM = {
  602. MSG_FIL_ADJUSTING_EN,
  603. MSG_FIL_ADJUSTING_CZ
  604. };
  605. const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN[] PROGMEM = "Iteration ";
  606. const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_CZ[] PROGMEM = "Iterace ";
  607. const char * const MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_LANG_TABLE[LANG_NUM] PROGMEM = {
  608. MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN,
  609. MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_CZ
  610. };
  611. const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_EN[] PROGMEM = "Searching bed calibration point";
  612. const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_CZ[] PROGMEM = "Hledam kalibracni bod podlozky";
  613. const char * const MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_LANG_TABLE[LANG_NUM] PROGMEM = {
  614. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_EN,
  615. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_CZ
  616. };
  617. const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_EN[] PROGMEM = " of 4";
  618. const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_CZ[] PROGMEM = " z 4";
  619. const char * const MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_LANG_TABLE[LANG_NUM] PROGMEM = {
  620. MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_EN,
  621. MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_CZ
  622. };
  623. const char MSG_FINISHING_MOVEMENTS_EN[] PROGMEM = "Finishing movements";
  624. const char MSG_FINISHING_MOVEMENTS_CZ[] PROGMEM = "Dokoncovani pohybu";
  625. const char * const MSG_FINISHING_MOVEMENTS_LANG_TABLE[LANG_NUM] PROGMEM = {
  626. MSG_FINISHING_MOVEMENTS_EN,
  627. MSG_FINISHING_MOVEMENTS_CZ
  628. };
  629. const char MSG_FLOW_EN[] PROGMEM = "Flow";
  630. const char MSG_FLOW_CZ[] PROGMEM = "Prutok";
  631. const char * const MSG_FLOW_LANG_TABLE[LANG_NUM] PROGMEM = {
  632. MSG_FLOW_EN,
  633. MSG_FLOW_CZ
  634. };
  635. const char MSG_FLOW0_EN[] PROGMEM = "Flow 0";
  636. const char * const MSG_FLOW0_LANG_TABLE[1] PROGMEM = {
  637. MSG_FLOW0_EN
  638. };
  639. const char MSG_FLOW1_EN[] PROGMEM = "Flow 1";
  640. const char * const MSG_FLOW1_LANG_TABLE[1] PROGMEM = {
  641. MSG_FLOW1_EN
  642. };
  643. const char MSG_FLOW2_EN[] PROGMEM = "Flow 2";
  644. const char * const MSG_FLOW2_LANG_TABLE[1] PROGMEM = {
  645. MSG_FLOW2_EN
  646. };
  647. const char MSG_FOLLOW_CALIBRATION_FLOW_EN[] PROGMEM = "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow.";
  648. const char MSG_FOLLOW_CALIBRATION_FLOW_CZ[] PROGMEM = "Tiskarna nebyla jeste zkalibrovana. Postupujte prosim podle manualu, kapitola Zaciname, odstavec Postup kalibrace.";
  649. const char * const MSG_FOLLOW_CALIBRATION_FLOW_LANG_TABLE[LANG_NUM] PROGMEM = {
  650. MSG_FOLLOW_CALIBRATION_FLOW_EN,
  651. MSG_FOLLOW_CALIBRATION_FLOW_CZ
  652. };
  653. const char MSG_FREE_MEMORY_EN[] PROGMEM = " Free Memory: ";
  654. const char * const MSG_FREE_MEMORY_LANG_TABLE[1] PROGMEM = {
  655. MSG_FREE_MEMORY_EN
  656. };
  657. const char MSG_FSENSOR_NA_EN[] PROGMEM = "Fil. sensor [N/A]";
  658. const char MSG_FSENSOR_NA_CZ[] PROGMEM = "Fil. senzor [N/A]";
  659. const char * const MSG_FSENSOR_NA_LANG_TABLE[LANG_NUM] PROGMEM = {
  660. MSG_FSENSOR_NA_EN,
  661. MSG_FSENSOR_NA_CZ
  662. };
  663. const char MSG_FSENSOR_OFF_EN[] PROGMEM = "Fil. sensor [off]";
  664. const char MSG_FSENSOR_OFF_CZ[] PROGMEM = "Fil. senzor [vyp]";
  665. const char * const MSG_FSENSOR_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  666. MSG_FSENSOR_OFF_EN,
  667. MSG_FSENSOR_OFF_CZ
  668. };
  669. const char MSG_FSENSOR_ON_EN[] PROGMEM = "Fil. sensor [on]";
  670. const char MSG_FSENSOR_ON_CZ[] PROGMEM = "Fil. senzor [zap]";
  671. const char * const MSG_FSENSOR_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  672. MSG_FSENSOR_ON_EN,
  673. MSG_FSENSOR_ON_CZ
  674. };
  675. const char MSG_FSENS_AUTOLOAD_NA_EN[] PROGMEM = "F. autoload [N/A]";
  676. const char MSG_FSENS_AUTOLOAD_NA_CZ[] PROGMEM = "F. autozav. [N/A]";
  677. const char * const MSG_FSENS_AUTOLOAD_NA_LANG_TABLE[LANG_NUM] PROGMEM = {
  678. MSG_FSENS_AUTOLOAD_NA_EN,
  679. MSG_FSENS_AUTOLOAD_NA_CZ
  680. };
  681. const char MSG_FSENS_AUTOLOAD_OFF_EN[] PROGMEM = "F. autoload [off]";
  682. const char MSG_FSENS_AUTOLOAD_OFF_CZ[] PROGMEM = "F. autozav. [vyp]";
  683. const char * const MSG_FSENS_AUTOLOAD_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  684. MSG_FSENS_AUTOLOAD_OFF_EN,
  685. MSG_FSENS_AUTOLOAD_OFF_CZ
  686. };
  687. const char MSG_FSENS_AUTOLOAD_ON_EN[] PROGMEM = "F. autoload [on]";
  688. const char MSG_FSENS_AUTOLOAD_ON_CZ[] PROGMEM = "F. autozav. [zap]";
  689. const char * const MSG_FSENS_AUTOLOAD_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  690. MSG_FSENS_AUTOLOAD_ON_EN,
  691. MSG_FSENS_AUTOLOAD_ON_CZ
  692. };
  693. const char MSG_FSENS_NOT_RESPONDING_EN[] PROGMEM = "ERROR: Filament sensor is not responding, please check connection.";
  694. const char MSG_FSENS_NOT_RESPONDING_CZ[] PROGMEM = "CHYBA: Filament senzor nereaguje, zkontrolujte zapojeni.";
  695. const char * const MSG_FSENS_NOT_RESPONDING_LANG_TABLE[LANG_NUM] PROGMEM = {
  696. MSG_FSENS_NOT_RESPONDING_EN,
  697. MSG_FSENS_NOT_RESPONDING_CZ
  698. };
  699. const char MSG_FW_VERSION_ALPHA_EN[] PROGMEM = "You are using firmware alpha version. This is development version. Using this version is not recommended and may cause printer damage.";
  700. const char MSG_FW_VERSION_ALPHA_CZ[] PROGMEM = "Pouzivate alpha verzi firmwaru. Jedna se o vyvojovou verzi. Pouzivani teto verze firmware neni doporuceno a muze zpusobit poskozeni tiskarny.";
  701. const char * const MSG_FW_VERSION_ALPHA_LANG_TABLE[LANG_NUM] PROGMEM = {
  702. MSG_FW_VERSION_ALPHA_EN,
  703. MSG_FW_VERSION_ALPHA_CZ
  704. };
  705. const char MSG_FW_VERSION_BETA_EN[] PROGMEM = "You are using firmware beta version. This is development version. Using this version is not recommended and may cause printer damage.";
  706. const char MSG_FW_VERSION_BETA_CZ[] PROGMEM = "Pouzivate beta verzi firmwaru. Jedna se o vyvojovou verzi. Pouzivani teto verze firmware neni doporuceno a muze zpusobit poskozeni tiskarny.";
  707. const char * const MSG_FW_VERSION_BETA_LANG_TABLE[LANG_NUM] PROGMEM = {
  708. MSG_FW_VERSION_BETA_EN,
  709. MSG_FW_VERSION_BETA_CZ
  710. };
  711. const char MSG_FW_VERSION_DEBUG_EN[] PROGMEM = "This is development firmware version which contains additional debugging features. Using this version may cause printer damage.";
  712. const char MSG_FW_VERSION_DEBUG_CZ[] PROGMEM = "Toto je vyvojova verze firmwaru obsahujici funkce pro debugging. Pouziti teto verze muze poskodit Vasi tiskarnu.";
  713. const char * const MSG_FW_VERSION_DEBUG_LANG_TABLE[LANG_NUM] PROGMEM = {
  714. MSG_FW_VERSION_DEBUG_EN,
  715. MSG_FW_VERSION_DEBUG_CZ
  716. };
  717. const char MSG_FW_VERSION_RC_EN[] PROGMEM = "This firmware version is release candidate. Some of the features may not work properly.";
  718. const char MSG_FW_VERSION_RC_CZ[] PROGMEM = "Tato verze firmware je release candidate. Nektere z funkci nemusi pracovat spolehlive.";
  719. const char * const MSG_FW_VERSION_RC_LANG_TABLE[LANG_NUM] PROGMEM = {
  720. MSG_FW_VERSION_RC_EN,
  721. MSG_FW_VERSION_RC_CZ
  722. };
  723. const char MSG_FW_VERSION_UNKNOWN_EN[] PROGMEM = "WARNING: Unknown firmware version";
  724. const char MSG_FW_VERSION_UNKNOWN_CZ[] PROGMEM = "VAROVANI: Neznama verze firmware";
  725. const char * const MSG_FW_VERSION_UNKNOWN_LANG_TABLE[LANG_NUM] PROGMEM = {
  726. MSG_FW_VERSION_UNKNOWN_EN,
  727. MSG_FW_VERSION_UNKNOWN_CZ
  728. };
  729. const char MSG_HEATING_EN[] PROGMEM = "Heating";
  730. const char MSG_HEATING_CZ[] PROGMEM = "Zahrivani";
  731. const char * const MSG_HEATING_LANG_TABLE[LANG_NUM] PROGMEM = {
  732. MSG_HEATING_EN,
  733. MSG_HEATING_CZ
  734. };
  735. const char MSG_HEATING_COMPLETE_EN[] PROGMEM = "Heating done.";
  736. const char MSG_HEATING_COMPLETE_CZ[] PROGMEM = "Zahrivani OK.";
  737. const char * const MSG_HEATING_COMPLETE_LANG_TABLE[LANG_NUM] PROGMEM = {
  738. MSG_HEATING_COMPLETE_EN,
  739. MSG_HEATING_COMPLETE_CZ
  740. };
  741. const char MSG_HOMEYZ_EN[] PROGMEM = "Calibrate Z";
  742. const char MSG_HOMEYZ_CZ[] PROGMEM = "Kalibrovat Z";
  743. const char * const MSG_HOMEYZ_LANG_TABLE[LANG_NUM] PROGMEM = {
  744. MSG_HOMEYZ_EN,
  745. MSG_HOMEYZ_CZ
  746. };
  747. const char MSG_HOMEYZ_DONE_EN[] PROGMEM = "Calibration done";
  748. const char MSG_HOMEYZ_DONE_CZ[] PROGMEM = "Kalibrace OK";
  749. const char * const MSG_HOMEYZ_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
  750. MSG_HOMEYZ_DONE_EN,
  751. MSG_HOMEYZ_DONE_CZ
  752. };
  753. const char MSG_HOMEYZ_PROGRESS_EN[] PROGMEM = "Calibrating Z";
  754. const char MSG_HOMEYZ_PROGRESS_CZ[] PROGMEM = "Kalibruji Z";
  755. const char * const MSG_HOMEYZ_PROGRESS_LANG_TABLE[LANG_NUM] PROGMEM = {
  756. MSG_HOMEYZ_PROGRESS_EN,
  757. MSG_HOMEYZ_PROGRESS_CZ
  758. };
  759. const char MSG_HOTEND_OFFSET_EN[] PROGMEM = "Hotend offsets:";
  760. const char * const MSG_HOTEND_OFFSET_LANG_TABLE[1] PROGMEM = {
  761. MSG_HOTEND_OFFSET_EN
  762. };
  763. const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_EN[] PROGMEM = "Improving bed calibration point";
  764. const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_CZ[] PROGMEM = "Zlepsuji presnost kalibracniho bodu";
  765. const char * const MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_LANG_TABLE[LANG_NUM] PROGMEM = {
  766. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_EN,
  767. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_CZ
  768. };
  769. const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_EN[] PROGMEM = " of 4";
  770. const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_CZ[] PROGMEM = " z 4";
  771. const char * const MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_LANG_TABLE[LANG_NUM] PROGMEM = {
  772. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_EN,
  773. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_CZ
  774. };
  775. const char MSG_INFO_EXTRUDER_EN[] PROGMEM = "Extruder info";
  776. const char * const MSG_INFO_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  777. MSG_INFO_EXTRUDER_EN
  778. };
  779. const char MSG_INFO_FILAMENT_XDIFF_EN[] PROGMEM = "Fil. Xd:";
  780. const char * const MSG_INFO_FILAMENT_XDIFF_LANG_TABLE[1] PROGMEM = {
  781. MSG_INFO_FILAMENT_XDIFF_EN
  782. };
  783. const char MSG_INFO_FILAMENT_YDIFF_EN[] PROGMEM = "Fil. Ydiff:";
  784. const char * const MSG_INFO_FILAMENT_YDIFF_LANG_TABLE[1] PROGMEM = {
  785. MSG_INFO_FILAMENT_YDIFF_EN
  786. };
  787. const char MSG_INFO_NOZZLE_FAN_EN[] PROGMEM = "Nozzle FAN:";
  788. const char MSG_INFO_NOZZLE_FAN_CZ[] PROGMEM = "Trysk. vent:";
  789. const char * const MSG_INFO_NOZZLE_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
  790. MSG_INFO_NOZZLE_FAN_EN,
  791. MSG_INFO_NOZZLE_FAN_CZ
  792. };
  793. const char MSG_INFO_PRINT_FAN_EN[] PROGMEM = "Print FAN: ";
  794. const char MSG_INFO_PRINT_FAN_CZ[] PROGMEM = "Tisk. vent:";
  795. const char * const MSG_INFO_PRINT_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
  796. MSG_INFO_PRINT_FAN_EN,
  797. MSG_INFO_PRINT_FAN_CZ
  798. };
  799. const char MSG_INIT_SDCARD_EN[] PROGMEM = "Init. SD card";
  800. const char * const MSG_INIT_SDCARD_LANG_TABLE[1] PROGMEM = {
  801. MSG_INIT_SDCARD_EN
  802. };
  803. const char MSG_INSERT_FILAMENT_EN[] PROGMEM = "Insert filament";
  804. const char MSG_INSERT_FILAMENT_CZ[] PROGMEM = "Vlozte filament";
  805. const char * const MSG_INSERT_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  806. MSG_INSERT_FILAMENT_EN,
  807. MSG_INSERT_FILAMENT_CZ
  808. };
  809. const char MSG_INVALID_EXTRUDER_EN[] PROGMEM = "Invalid extruder";
  810. const char * const MSG_INVALID_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  811. MSG_INVALID_EXTRUDER_EN
  812. };
  813. const char MSG_KILLED_EN[] PROGMEM = "KILLED. ";
  814. const char * const MSG_KILLED_LANG_TABLE[1] PROGMEM = {
  815. MSG_KILLED_EN
  816. };
  817. const char MSG_LANGUAGE_NAME_EN[] PROGMEM = "English";
  818. const char MSG_LANGUAGE_NAME_CZ[] PROGMEM = "Cestina";
  819. const char * const MSG_LANGUAGE_NAME_LANG_TABLE[LANG_NUM] PROGMEM = {
  820. MSG_LANGUAGE_NAME_EN,
  821. MSG_LANGUAGE_NAME_CZ
  822. };
  823. const char MSG_LANGUAGE_SELECT_EN[] PROGMEM = "Select language";
  824. const char MSG_LANGUAGE_SELECT_CZ[] PROGMEM = "Vyber jazyka";
  825. const char * const MSG_LANGUAGE_SELECT_LANG_TABLE[LANG_NUM] PROGMEM = {
  826. MSG_LANGUAGE_SELECT_EN,
  827. MSG_LANGUAGE_SELECT_CZ
  828. };
  829. const char MSG_LEFT_EN[] PROGMEM = "Left:";
  830. const char MSG_LEFT_CZ[] PROGMEM = "Levy:";
  831. const char * const MSG_LEFT_LANG_TABLE[LANG_NUM] PROGMEM = {
  832. MSG_LEFT_EN,
  833. MSG_LEFT_CZ
  834. };
  835. const char MSG_LOADING_COLOR_EN[] PROGMEM = "Loading color";
  836. const char MSG_LOADING_COLOR_CZ[] PROGMEM = "Cisteni barvy";
  837. const char * const MSG_LOADING_COLOR_LANG_TABLE[LANG_NUM] PROGMEM = {
  838. MSG_LOADING_COLOR_EN,
  839. MSG_LOADING_COLOR_CZ
  840. };
  841. const char MSG_LOADING_FILAMENT_EN[] PROGMEM = "Loading filament";
  842. const char MSG_LOADING_FILAMENT_CZ[] PROGMEM = "Zavadeni filamentu";
  843. const char * const MSG_LOADING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  844. MSG_LOADING_FILAMENT_EN,
  845. MSG_LOADING_FILAMENT_CZ
  846. };
  847. const char MSG_LOAD_ALL_EN[] PROGMEM = "Load all";
  848. const char MSG_LOAD_ALL_CZ[] PROGMEM = "Zavest vse";
  849. const char * const MSG_LOAD_ALL_LANG_TABLE[LANG_NUM] PROGMEM = {
  850. MSG_LOAD_ALL_EN,
  851. MSG_LOAD_ALL_CZ
  852. };
  853. const char MSG_LOAD_EPROM_EN[] PROGMEM = "Load memory";
  854. const char * const MSG_LOAD_EPROM_LANG_TABLE[1] PROGMEM = {
  855. MSG_LOAD_EPROM_EN
  856. };
  857. const char MSG_LOAD_FILAMENT_EN[] PROGMEM = "Load filament";
  858. const char MSG_LOAD_FILAMENT_CZ[] PROGMEM = "Zavest filament";
  859. const char * const MSG_LOAD_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  860. MSG_LOAD_FILAMENT_EN,
  861. MSG_LOAD_FILAMENT_CZ
  862. };
  863. const char MSG_LOAD_FILAMENT_1_EN[] PROGMEM = "Load filament 1";
  864. const char MSG_LOAD_FILAMENT_1_CZ[] PROGMEM = "Zavest filament 1";
  865. const char * const MSG_LOAD_FILAMENT_1_LANG_TABLE[LANG_NUM] PROGMEM = {
  866. MSG_LOAD_FILAMENT_1_EN,
  867. MSG_LOAD_FILAMENT_1_CZ
  868. };
  869. const char MSG_LOAD_FILAMENT_2_EN[] PROGMEM = "Load filament 2";
  870. const char MSG_LOAD_FILAMENT_2_CZ[] PROGMEM = "Zavest filament 2";
  871. const char * const MSG_LOAD_FILAMENT_2_LANG_TABLE[LANG_NUM] PROGMEM = {
  872. MSG_LOAD_FILAMENT_2_EN,
  873. MSG_LOAD_FILAMENT_2_CZ
  874. };
  875. const char MSG_LOAD_FILAMENT_3_EN[] PROGMEM = "Load filament 3";
  876. const char MSG_LOAD_FILAMENT_3_CZ[] PROGMEM = "Zavest filament 3";
  877. const char * const MSG_LOAD_FILAMENT_3_LANG_TABLE[LANG_NUM] PROGMEM = {
  878. MSG_LOAD_FILAMENT_3_EN,
  879. MSG_LOAD_FILAMENT_3_CZ
  880. };
  881. const char MSG_LOAD_FILAMENT_4_EN[] PROGMEM = "Load filament 4";
  882. const char MSG_LOAD_FILAMENT_4_CZ[] PROGMEM = "Zavest filament 4";
  883. const char * const MSG_LOAD_FILAMENT_4_LANG_TABLE[LANG_NUM] PROGMEM = {
  884. MSG_LOAD_FILAMENT_4_EN,
  885. MSG_LOAD_FILAMENT_4_CZ
  886. };
  887. const char MSG_LOOSE_PULLEY_EN[] PROGMEM = "Loose pulley";
  888. const char MSG_LOOSE_PULLEY_CZ[] PROGMEM = "Uvolnena remenicka";
  889. const char * const MSG_LOOSE_PULLEY_LANG_TABLE[LANG_NUM] PROGMEM = {
  890. MSG_LOOSE_PULLEY_EN,
  891. MSG_LOOSE_PULLEY_CZ
  892. };
  893. const char MSG_M104_INVALID_EXTRUDER_EN[] PROGMEM = "M104 Invalid extruder ";
  894. const char * const MSG_M104_INVALID_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  895. MSG_M104_INVALID_EXTRUDER_EN
  896. };
  897. const char MSG_M105_INVALID_EXTRUDER_EN[] PROGMEM = "M105 Invalid extruder ";
  898. const char * const MSG_M105_INVALID_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  899. MSG_M105_INVALID_EXTRUDER_EN
  900. };
  901. const char MSG_M109_INVALID_EXTRUDER_EN[] PROGMEM = "M109 Invalid extruder ";
  902. const char * const MSG_M109_INVALID_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  903. MSG_M109_INVALID_EXTRUDER_EN
  904. };
  905. const char MSG_M115_REPORT_EN[] PROGMEM = "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:https://github.com/prusa3d/Prusa-i3-Plus/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:1 UUID:00000000-0000-0000-0000-000000000000\n";
  906. const char * const MSG_M115_REPORT_LANG_TABLE[1] PROGMEM = {
  907. MSG_M115_REPORT_EN
  908. };
  909. const char MSG_M117_V2_CALIBRATION_EN[] PROGMEM = "M117 First layer cal.";
  910. const char MSG_M117_V2_CALIBRATION_CZ[] PROGMEM = "M117 Kal. prvni vrstvy";
  911. const char * const MSG_M117_V2_CALIBRATION_LANG_TABLE[LANG_NUM] PROGMEM = {
  912. MSG_M117_V2_CALIBRATION_EN,
  913. MSG_M117_V2_CALIBRATION_CZ
  914. };
  915. const char MSG_M119_REPORT_EN[] PROGMEM = "Reporting endstop status";
  916. const char * const MSG_M119_REPORT_LANG_TABLE[1] PROGMEM = {
  917. MSG_M119_REPORT_EN
  918. };
  919. const char MSG_M200_INVALID_EXTRUDER_EN[] PROGMEM = "M200 Invalid extruder ";
  920. const char * const MSG_M200_INVALID_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  921. MSG_M200_INVALID_EXTRUDER_EN
  922. };
  923. const char MSG_M218_INVALID_EXTRUDER_EN[] PROGMEM = "M218 Invalid extruder ";
  924. const char * const MSG_M218_INVALID_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  925. MSG_M218_INVALID_EXTRUDER_EN
  926. };
  927. const char MSG_M221_INVALID_EXTRUDER_EN[] PROGMEM = "M221 Invalid extruder ";
  928. const char * const MSG_M221_INVALID_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  929. MSG_M221_INVALID_EXTRUDER_EN
  930. };
  931. const char MSG_MAIN_EN[] PROGMEM = "Main";
  932. const char MSG_MAIN_CZ[] PROGMEM = "Hlavni nabidka";
  933. const char * const MSG_MAIN_LANG_TABLE[LANG_NUM] PROGMEM = {
  934. MSG_MAIN_EN,
  935. MSG_MAIN_CZ
  936. };
  937. const char MSG_MARK_FIL_EN[] PROGMEM = "Mark filament 100mm from extruder body. Click when done.";
  938. const char MSG_MARK_FIL_CZ[] PROGMEM = "Oznacte filament 100 mm od tela extruderu a po te potvrdte tlacitkem.";
  939. const char * const MSG_MARK_FIL_LANG_TABLE[LANG_NUM] PROGMEM = {
  940. MSG_MARK_FIL_EN,
  941. MSG_MARK_FIL_CZ
  942. };
  943. const char MSG_MAX_EN[] PROGMEM = " \002 Max";
  944. const char * const MSG_MAX_LANG_TABLE[1] PROGMEM = {
  945. MSG_MAX_EN
  946. };
  947. const char MSG_MEASURED_SKEW_EN[] PROGMEM = "Measured skew:";
  948. const char MSG_MEASURED_SKEW_CZ[] PROGMEM = "Merene zkoseni:";
  949. const char * const MSG_MEASURED_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
  950. MSG_MEASURED_SKEW_EN,
  951. MSG_MEASURED_SKEW_CZ
  952. };
  953. const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_EN[] PROGMEM = "Measuring reference height of calibration point";
  954. const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_CZ[] PROGMEM = "Merim referencni vysku kalibracniho bodu";
  955. const char * const MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_LANG_TABLE[LANG_NUM] PROGMEM = {
  956. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_EN,
  957. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_CZ
  958. };
  959. const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_EN[] PROGMEM = " of 9";
  960. const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_CZ[] PROGMEM = " z 9";
  961. const char * const MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_LANG_TABLE[LANG_NUM] PROGMEM = {
  962. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_EN,
  963. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_CZ
  964. };
  965. const char MSG_MENU_BELT_STATUS_EN[] PROGMEM = "Belt status";
  966. const char MSG_MENU_BELT_STATUS_CZ[] PROGMEM = "Stav remenu";
  967. const char * const MSG_MENU_BELT_STATUS_LANG_TABLE[LANG_NUM] PROGMEM = {
  968. MSG_MENU_BELT_STATUS_EN,
  969. MSG_MENU_BELT_STATUS_CZ
  970. };
  971. const char MSG_MENU_CALIBRATION_EN[] PROGMEM = "Calibration";
  972. const char MSG_MENU_CALIBRATION_CZ[] PROGMEM = "Kalibrace";
  973. const char * const MSG_MENU_CALIBRATION_LANG_TABLE[LANG_NUM] PROGMEM = {
  974. MSG_MENU_CALIBRATION_EN,
  975. MSG_MENU_CALIBRATION_CZ
  976. };
  977. const char MSG_MENU_TEMPERATURES_EN[] PROGMEM = "Temperatures";
  978. const char MSG_MENU_TEMPERATURES_CZ[] PROGMEM = "Teploty";
  979. const char * const MSG_MENU_TEMPERATURES_LANG_TABLE[LANG_NUM] PROGMEM = {
  980. MSG_MENU_TEMPERATURES_EN,
  981. MSG_MENU_TEMPERATURES_CZ
  982. };
  983. const char MSG_MENU_VOLTAGES_EN[] PROGMEM = "Voltages";
  984. const char MSG_MENU_VOLTAGES_CZ[] PROGMEM = "Napeti";
  985. const char * const MSG_MENU_VOLTAGES_LANG_TABLE[LANG_NUM] PROGMEM = {
  986. MSG_MENU_VOLTAGES_EN,
  987. MSG_MENU_VOLTAGES_CZ
  988. };
  989. const char MSG_MESH_BED_LEVELING_EN[] PROGMEM = "Mesh Bed Leveling";
  990. const char * const MSG_MESH_BED_LEVELING_LANG_TABLE[1] PROGMEM = {
  991. MSG_MESH_BED_LEVELING_EN
  992. };
  993. const char MSG_MIN_EN[] PROGMEM = " \002 Min";
  994. const char * const MSG_MIN_LANG_TABLE[1] PROGMEM = {
  995. MSG_MIN_EN
  996. };
  997. const char MSG_MOTION_EN[] PROGMEM = "Motion";
  998. const char * const MSG_MOTION_LANG_TABLE[1] PROGMEM = {
  999. MSG_MOTION_EN
  1000. };
  1001. const char MSG_MOVE_01MM_EN[] PROGMEM = "Move 0.1mm";
  1002. const char * const MSG_MOVE_01MM_LANG_TABLE[1] PROGMEM = {
  1003. MSG_MOVE_01MM_EN
  1004. };
  1005. const char MSG_MOVE_10MM_EN[] PROGMEM = "Move 10mm";
  1006. const char * const MSG_MOVE_10MM_LANG_TABLE[1] PROGMEM = {
  1007. MSG_MOVE_10MM_EN
  1008. };
  1009. const char MSG_MOVE_1MM_EN[] PROGMEM = "Move 1mm";
  1010. const char * const MSG_MOVE_1MM_LANG_TABLE[1] PROGMEM = {
  1011. MSG_MOVE_1MM_EN
  1012. };
  1013. const char MSG_MOVE_AXIS_EN[] PROGMEM = "Move axis";
  1014. const char MSG_MOVE_AXIS_CZ[] PROGMEM = "Posunout osu";
  1015. const char * const MSG_MOVE_AXIS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1016. MSG_MOVE_AXIS_EN,
  1017. MSG_MOVE_AXIS_CZ
  1018. };
  1019. const char MSG_MOVE_CARRIAGE_TO_THE_TOP_EN[] PROGMEM = "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done.";
  1020. const char MSG_MOVE_CARRIAGE_TO_THE_TOP_CZ[] PROGMEM = "Kalibrace XYZ. Otacenim tlacitka posunte Z osu az k~hornimu dorazu. Potvrdte tlacitkem.";
  1021. const char * const MSG_MOVE_CARRIAGE_TO_THE_TOP_LANG_TABLE[LANG_NUM] PROGMEM = {
  1022. MSG_MOVE_CARRIAGE_TO_THE_TOP_EN,
  1023. MSG_MOVE_CARRIAGE_TO_THE_TOP_CZ
  1024. };
  1025. const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_EN[] PROGMEM = "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done.";
  1026. const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_CZ[] PROGMEM = "Kalibrace Z. Otacenim tlacitka posunte Z osu az k~hornimu dorazu. Potvrdte tlacitkem.";
  1027. const char * const MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
  1028. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_EN,
  1029. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_CZ
  1030. };
  1031. const char MSG_MOVE_E_EN[] PROGMEM = "Extruder";
  1032. const char * const MSG_MOVE_E_LANG_TABLE[1] PROGMEM = {
  1033. MSG_MOVE_E_EN
  1034. };
  1035. const char MSG_MOVE_X_EN[] PROGMEM = "Move X";
  1036. const char MSG_MOVE_X_CZ[] PROGMEM = "Posunout X";
  1037. const char * const MSG_MOVE_X_LANG_TABLE[LANG_NUM] PROGMEM = {
  1038. MSG_MOVE_X_EN,
  1039. MSG_MOVE_X_CZ
  1040. };
  1041. const char MSG_MOVE_Y_EN[] PROGMEM = "Move Y";
  1042. const char MSG_MOVE_Y_CZ[] PROGMEM = "Posunout Y";
  1043. const char * const MSG_MOVE_Y_LANG_TABLE[LANG_NUM] PROGMEM = {
  1044. MSG_MOVE_Y_EN,
  1045. MSG_MOVE_Y_CZ
  1046. };
  1047. const char MSG_MOVE_Z_EN[] PROGMEM = "Move Z";
  1048. const char MSG_MOVE_Z_CZ[] PROGMEM = "Posunout Z";
  1049. const char * const MSG_MOVE_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
  1050. MSG_MOVE_Z_EN,
  1051. MSG_MOVE_Z_CZ
  1052. };
  1053. const char MSG_NEW_FIRMWARE_AVAILABLE_EN[] PROGMEM = "New firmware version available:";
  1054. const char MSG_NEW_FIRMWARE_AVAILABLE_CZ[] PROGMEM = "Vysla nova verze firmware:";
  1055. const char * const MSG_NEW_FIRMWARE_AVAILABLE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1056. MSG_NEW_FIRMWARE_AVAILABLE_EN,
  1057. MSG_NEW_FIRMWARE_AVAILABLE_CZ
  1058. };
  1059. const char MSG_NEW_FIRMWARE_PLEASE_UPGRADE_EN[] PROGMEM = "Please upgrade.";
  1060. const char MSG_NEW_FIRMWARE_PLEASE_UPGRADE_CZ[] PROGMEM = "Prosim aktualizujte.";
  1061. const char * const MSG_NEW_FIRMWARE_PLEASE_UPGRADE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1062. MSG_NEW_FIRMWARE_PLEASE_UPGRADE_EN,
  1063. MSG_NEW_FIRMWARE_PLEASE_UPGRADE_CZ
  1064. };
  1065. const char MSG_NO_EN[] PROGMEM = "No";
  1066. const char MSG_NO_CZ[] PROGMEM = "Ne";
  1067. const char * const MSG_NO_LANG_TABLE[LANG_NUM] PROGMEM = {
  1068. MSG_NO_EN,
  1069. MSG_NO_CZ
  1070. };
  1071. const char MSG_NOT_COLOR_EN[] PROGMEM = "Color not correct";
  1072. const char MSG_NOT_COLOR_CZ[] PROGMEM = "Barva neni cista";
  1073. const char * const MSG_NOT_COLOR_LANG_TABLE[LANG_NUM] PROGMEM = {
  1074. MSG_NOT_COLOR_EN,
  1075. MSG_NOT_COLOR_CZ
  1076. };
  1077. const char MSG_NOT_LOADED_EN[] PROGMEM = "Filament not loaded";
  1078. const char MSG_NOT_LOADED_CZ[] PROGMEM = "Filament nezaveden";
  1079. const char * const MSG_NOT_LOADED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1080. MSG_NOT_LOADED_EN,
  1081. MSG_NOT_LOADED_CZ
  1082. };
  1083. const char MSG_NOZZLE_EN[] PROGMEM = "Nozzle";
  1084. const char MSG_NOZZLE_CZ[] PROGMEM = "Tryska";
  1085. const char * const MSG_NOZZLE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1086. MSG_NOZZLE_EN,
  1087. MSG_NOZZLE_CZ
  1088. };
  1089. const char MSG_NOZZLE1_EN[] PROGMEM = "Nozzle2";
  1090. const char * const MSG_NOZZLE1_LANG_TABLE[1] PROGMEM = {
  1091. MSG_NOZZLE1_EN
  1092. };
  1093. const char MSG_NOZZLE2_EN[] PROGMEM = "Nozzle3";
  1094. const char * const MSG_NOZZLE2_LANG_TABLE[1] PROGMEM = {
  1095. MSG_NOZZLE2_EN
  1096. };
  1097. const char MSG_NO_CARD_EN[] PROGMEM = "No SD card";
  1098. const char MSG_NO_CARD_CZ[] PROGMEM = "Zadna SD karta";
  1099. const char * const MSG_NO_CARD_LANG_TABLE[LANG_NUM] PROGMEM = {
  1100. MSG_NO_CARD_EN,
  1101. MSG_NO_CARD_CZ
  1102. };
  1103. const char MSG_NO_MOVE_EN[] PROGMEM = "No move.";
  1104. const char * const MSG_NO_MOVE_LANG_TABLE[1] PROGMEM = {
  1105. MSG_NO_MOVE_EN
  1106. };
  1107. const char MSG_OFF_EN[] PROGMEM = "Off";
  1108. const char * const MSG_OFF_LANG_TABLE[1] PROGMEM = {
  1109. MSG_OFF_EN
  1110. };
  1111. const char MSG_OK_EN[] PROGMEM = "ok";
  1112. const char * const MSG_OK_LANG_TABLE[1] PROGMEM = {
  1113. MSG_OK_EN
  1114. };
  1115. const char MSG_ON_EN[] PROGMEM = "On ";
  1116. const char * const MSG_ON_LANG_TABLE[1] PROGMEM = {
  1117. MSG_ON_EN
  1118. };
  1119. const char MSG_PAPER_EN[] PROGMEM = "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately.";
  1120. const char MSG_PAPER_CZ[] PROGMEM = "Umistete list papiru na podlozku a udrzujte jej pod tryskou behem mereni prvnich 4 bodu. Pokud tryska zachyti papir, vypnete tiskarnu.";
  1121. const char * const MSG_PAPER_LANG_TABLE[LANG_NUM] PROGMEM = {
  1122. MSG_PAPER_EN,
  1123. MSG_PAPER_CZ
  1124. };
  1125. const char MSG_PAUSE_PRINT_EN[] PROGMEM = "Pause print";
  1126. const char MSG_PAUSE_PRINT_CZ[] PROGMEM = "Pozastavit tisk";
  1127. const char * const MSG_PAUSE_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1128. MSG_PAUSE_PRINT_EN,
  1129. MSG_PAUSE_PRINT_CZ
  1130. };
  1131. const char MSG_PICK_Z_EN[] PROGMEM = "Pick print";
  1132. const char MSG_PICK_Z_CZ[] PROGMEM = "Vyberte vytisk";
  1133. const char * const MSG_PICK_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
  1134. MSG_PICK_Z_EN,
  1135. MSG_PICK_Z_CZ
  1136. };
  1137. const char MSG_PID_EXTRUDER_EN[] PROGMEM = "PID calibration";
  1138. const char MSG_PID_EXTRUDER_CZ[] PROGMEM = "PID kalibrace";
  1139. const char * const MSG_PID_EXTRUDER_LANG_TABLE[LANG_NUM] PROGMEM = {
  1140. MSG_PID_EXTRUDER_EN,
  1141. MSG_PID_EXTRUDER_CZ
  1142. };
  1143. const char MSG_PID_FINISHED_EN[] PROGMEM = "PID cal. finished";
  1144. const char MSG_PID_FINISHED_CZ[] PROGMEM = "PID kal. ukoncena";
  1145. const char * const MSG_PID_FINISHED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1146. MSG_PID_FINISHED_EN,
  1147. MSG_PID_FINISHED_CZ
  1148. };
  1149. const char MSG_PID_RUNNING_EN[] PROGMEM = "PID cal. ";
  1150. const char MSG_PID_RUNNING_CZ[] PROGMEM = "PID kal. ";
  1151. const char * const MSG_PID_RUNNING_LANG_TABLE[LANG_NUM] PROGMEM = {
  1152. MSG_PID_RUNNING_EN,
  1153. MSG_PID_RUNNING_CZ
  1154. };
  1155. const char MSG_PINDA_NOT_CALIBRATED_EN[] PROGMEM = "Temperature calibration has not been run yet";
  1156. const char MSG_PINDA_NOT_CALIBRATED_CZ[] PROGMEM = "Tiskarna nebyla teplotne zkalibrovana";
  1157. const char * const MSG_PINDA_NOT_CALIBRATED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1158. MSG_PINDA_NOT_CALIBRATED_EN,
  1159. MSG_PINDA_NOT_CALIBRATED_CZ
  1160. };
  1161. const char MSG_PINDA_PREHEAT_EN[] PROGMEM = "PINDA Heating";
  1162. const char MSG_PINDA_PREHEAT_CZ[] PROGMEM = "Nahrivani PINDA";
  1163. const char * const MSG_PINDA_PREHEAT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1164. MSG_PINDA_PREHEAT_EN,
  1165. MSG_PINDA_PREHEAT_CZ
  1166. };
  1167. const char MSG_PLACE_STEEL_SHEET_EN[] PROGMEM = "Please place steel sheet on heatbed.";
  1168. const char MSG_PLACE_STEEL_SHEET_CZ[] PROGMEM = "Umistete prosim tiskovy plat na heatbed";
  1169. const char * const MSG_PLACE_STEEL_SHEET_LANG_TABLE[LANG_NUM] PROGMEM = {
  1170. MSG_PLACE_STEEL_SHEET_EN,
  1171. MSG_PLACE_STEEL_SHEET_CZ
  1172. };
  1173. const char MSG_PLANNER_BUFFER_BYTES_EN[] PROGMEM = " PlannerBufferBytes: ";
  1174. const char * const MSG_PLANNER_BUFFER_BYTES_LANG_TABLE[1] PROGMEM = {
  1175. MSG_PLANNER_BUFFER_BYTES_EN
  1176. };
  1177. const char MSG_PLA_FILAMENT_LOADED_EN[] PROGMEM = "Is PLA filament loaded?";
  1178. const char MSG_PLA_FILAMENT_LOADED_CZ[] PROGMEM = "Je PLA filament zaveden?";
  1179. const char * const MSG_PLA_FILAMENT_LOADED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1180. MSG_PLA_FILAMENT_LOADED_EN,
  1181. MSG_PLA_FILAMENT_LOADED_CZ
  1182. };
  1183. const char MSG_PLEASE_LOAD_PLA_EN[] PROGMEM = "Please load PLA filament first.";
  1184. const char MSG_PLEASE_LOAD_PLA_CZ[] PROGMEM = "Nejdrive zavedte PLA filament prosim.";
  1185. const char * const MSG_PLEASE_LOAD_PLA_LANG_TABLE[LANG_NUM] PROGMEM = {
  1186. MSG_PLEASE_LOAD_PLA_EN,
  1187. MSG_PLEASE_LOAD_PLA_CZ
  1188. };
  1189. const char MSG_PLEASE_WAIT_EN[] PROGMEM = "Please wait";
  1190. const char MSG_PLEASE_WAIT_CZ[] PROGMEM = "Prosim cekejte";
  1191. const char * const MSG_PLEASE_WAIT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1192. MSG_PLEASE_WAIT_EN,
  1193. MSG_PLEASE_WAIT_CZ
  1194. };
  1195. const char MSG_POSITION_UNKNOWN_EN[] PROGMEM = "Home X/Y before Z";
  1196. const char * const MSG_POSITION_UNKNOWN_LANG_TABLE[1] PROGMEM = {
  1197. MSG_POSITION_UNKNOWN_EN
  1198. };
  1199. const char MSG_POWERUP_EN[] PROGMEM = "PowerUp";
  1200. const char * const MSG_POWERUP_LANG_TABLE[1] PROGMEM = {
  1201. MSG_POWERUP_EN
  1202. };
  1203. const char MSG_PREHEAT_EN[] PROGMEM = "Preheat";
  1204. const char MSG_PREHEAT_CZ[] PROGMEM = "Predehrev";
  1205. const char * const MSG_PREHEAT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1206. MSG_PREHEAT_EN,
  1207. MSG_PREHEAT_CZ
  1208. };
  1209. const char MSG_PREHEAT_NOZZLE_EN[] PROGMEM = "Preheat the nozzle!";
  1210. const char MSG_PREHEAT_NOZZLE_CZ[] PROGMEM = "Predehrejte trysku!";
  1211. const char * const MSG_PREHEAT_NOZZLE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1212. MSG_PREHEAT_NOZZLE_EN,
  1213. MSG_PREHEAT_NOZZLE_CZ
  1214. };
  1215. const char MSG_PREPARE_FILAMENT_EN[] PROGMEM = "Prepare new filament";
  1216. const char MSG_PREPARE_FILAMENT_CZ[] PROGMEM = "Pripravte filament";
  1217. const char * const MSG_PREPARE_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1218. MSG_PREPARE_FILAMENT_EN,
  1219. MSG_PREPARE_FILAMENT_CZ
  1220. };
  1221. const char MSG_PRESS_EN[] PROGMEM = "and press the knob";
  1222. const char MSG_PRESS_CZ[] PROGMEM = "a stisknete tlacitko";
  1223. const char * const MSG_PRESS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1224. MSG_PRESS_EN,
  1225. MSG_PRESS_CZ
  1226. };
  1227. const char MSG_PRESS_TO_PREHEAT_EN[] PROGMEM = "Press knob to preheat nozzle and continue.";
  1228. const char MSG_PRESS_TO_PREHEAT_CZ[] PROGMEM = "Pro nahrati trysky a pokracovani stisknete tlacitko.";
  1229. const char * const MSG_PRESS_TO_PREHEAT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1230. MSG_PRESS_TO_PREHEAT_EN,
  1231. MSG_PRESS_TO_PREHEAT_CZ
  1232. };
  1233. const char MSG_PRESS_TO_UNLOAD_EN[] PROGMEM = "Please press the knob to unload filament";
  1234. const char MSG_PRESS_TO_UNLOAD_CZ[] PROGMEM = "Pro vysunuti filamentu stisknete prosim tlacitko";
  1235. const char * const MSG_PRESS_TO_UNLOAD_LANG_TABLE[LANG_NUM] PROGMEM = {
  1236. MSG_PRESS_TO_UNLOAD_EN,
  1237. MSG_PRESS_TO_UNLOAD_CZ
  1238. };
  1239. const char MSG_PRINTER_DISCONNECTED_EN[] PROGMEM = "Printer disconnected";
  1240. const char * const MSG_PRINTER_DISCONNECTED_LANG_TABLE[1] PROGMEM = {
  1241. MSG_PRINTER_DISCONNECTED_EN
  1242. };
  1243. const char MSG_PRINT_ABORTED_EN[] PROGMEM = "Print aborted";
  1244. const char MSG_PRINT_ABORTED_CZ[] PROGMEM = "Tisk prerusen";
  1245. const char * const MSG_PRINT_ABORTED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1246. MSG_PRINT_ABORTED_EN,
  1247. MSG_PRINT_ABORTED_CZ
  1248. };
  1249. const char MSG_PRINT_PAUSED_EN[] PROGMEM = "Print paused";
  1250. const char MSG_PRINT_PAUSED_CZ[] PROGMEM = "Tisk pozastaven";
  1251. const char * const MSG_PRINT_PAUSED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1252. MSG_PRINT_PAUSED_EN,
  1253. MSG_PRINT_PAUSED_CZ
  1254. };
  1255. const char MSG_PRUSA3D_EN[] PROGMEM = "prusa3d.com";
  1256. const char MSG_PRUSA3D_CZ[] PROGMEM = "prusa3d.cz";
  1257. const char * const MSG_PRUSA3D_LANG_TABLE[LANG_NUM] PROGMEM = {
  1258. MSG_PRUSA3D_EN,
  1259. MSG_PRUSA3D_CZ
  1260. };
  1261. const char MSG_PRUSA3D_FORUM_EN[] PROGMEM = "forum.prusa3d.com";
  1262. const char MSG_PRUSA3D_FORUM_CZ[] PROGMEM = "forum.prusa3d.cz";
  1263. const char * const MSG_PRUSA3D_FORUM_LANG_TABLE[LANG_NUM] PROGMEM = {
  1264. MSG_PRUSA3D_FORUM_EN,
  1265. MSG_PRUSA3D_FORUM_CZ
  1266. };
  1267. const char MSG_PRUSA3D_HOWTO_EN[] PROGMEM = "howto.prusa3d.com";
  1268. const char MSG_PRUSA3D_HOWTO_CZ[] PROGMEM = "howto.prusa3d.cz";
  1269. const char * const MSG_PRUSA3D_HOWTO_LANG_TABLE[LANG_NUM] PROGMEM = {
  1270. MSG_PRUSA3D_HOWTO_EN,
  1271. MSG_PRUSA3D_HOWTO_CZ
  1272. };
  1273. const char MSG_PULL_OUT_FILAMENT_EN[] PROGMEM = "Please pull out filament immediately";
  1274. const char MSG_PULL_OUT_FILAMENT_CZ[] PROGMEM = "Prosim vyjmete urychlene filament";
  1275. const char * const MSG_PULL_OUT_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1276. MSG_PULL_OUT_FILAMENT_EN,
  1277. MSG_PULL_OUT_FILAMENT_CZ
  1278. };
  1279. const char MSG_REBOOT_EN[] PROGMEM = "Reboot the printer";
  1280. const char MSG_REBOOT_CZ[] PROGMEM = "Restartujte tiskarnu";
  1281. const char * const MSG_REBOOT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1282. MSG_REBOOT_EN,
  1283. MSG_REBOOT_CZ
  1284. };
  1285. const char MSG_RECOVERING_PRINT_EN[] PROGMEM = "Recovering print ";
  1286. const char MSG_RECOVERING_PRINT_CZ[] PROGMEM = "Obnovovani tisku ";
  1287. const char * const MSG_RECOVERING_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1288. MSG_RECOVERING_PRINT_EN,
  1289. MSG_RECOVERING_PRINT_CZ
  1290. };
  1291. const char MSG_RECOVER_PRINT_EN[] PROGMEM = "Blackout occurred. Recover print?";
  1292. const char MSG_RECOVER_PRINT_CZ[] PROGMEM = "Detekovan vypadek proudu.Obnovit tisk?";
  1293. const char * const MSG_RECOVER_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1294. MSG_RECOVER_PRINT_EN,
  1295. MSG_RECOVER_PRINT_CZ
  1296. };
  1297. const char MSG_RECTRACT_EN[] PROGMEM = "Rectract";
  1298. const char * const MSG_RECTRACT_LANG_TABLE[1] PROGMEM = {
  1299. MSG_RECTRACT_EN
  1300. };
  1301. const char MSG_REFRESH_EN[] PROGMEM = "\xF8" "Refresh";
  1302. const char * const MSG_REFRESH_LANG_TABLE[1] PROGMEM = {
  1303. MSG_REFRESH_EN
  1304. };
  1305. const char MSG_REMOVE_STEEL_SHEET_EN[] PROGMEM = "Please remove steel sheet from heatbed.";
  1306. const char MSG_REMOVE_STEEL_SHEET_CZ[] PROGMEM = "Odstrante tiskovy plat z heatbed prosim.";
  1307. const char * const MSG_REMOVE_STEEL_SHEET_LANG_TABLE[LANG_NUM] PROGMEM = {
  1308. MSG_REMOVE_STEEL_SHEET_EN,
  1309. MSG_REMOVE_STEEL_SHEET_CZ
  1310. };
  1311. const char MSG_RESEND_EN[] PROGMEM = "Resend: ";
  1312. const char * const MSG_RESEND_LANG_TABLE[1] PROGMEM = {
  1313. MSG_RESEND_EN
  1314. };
  1315. const char MSG_RESET_CALIBRATE_E_EN[] PROGMEM = "Reset E Cal.";
  1316. const char * const MSG_RESET_CALIBRATE_E_LANG_TABLE[1] PROGMEM = {
  1317. MSG_RESET_CALIBRATE_E_EN
  1318. };
  1319. const char MSG_RESTORE_FAILSAFE_EN[] PROGMEM = "Restore failsafe";
  1320. const char * const MSG_RESTORE_FAILSAFE_LANG_TABLE[1] PROGMEM = {
  1321. MSG_RESTORE_FAILSAFE_EN
  1322. };
  1323. const char MSG_RESUME_PRINT_EN[] PROGMEM = "Resume print";
  1324. const char MSG_RESUME_PRINT_CZ[] PROGMEM = "Pokracovat";
  1325. const char * const MSG_RESUME_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1326. MSG_RESUME_PRINT_EN,
  1327. MSG_RESUME_PRINT_CZ
  1328. };
  1329. const char MSG_RESUMING_EN[] PROGMEM = "Resuming print";
  1330. const char MSG_RESUMING_CZ[] PROGMEM = "Obnoveni tisku";
  1331. const char * const MSG_RESUMING_LANG_TABLE[LANG_NUM] PROGMEM = {
  1332. MSG_RESUMING_EN,
  1333. MSG_RESUMING_CZ
  1334. };
  1335. const char MSG_RESUMING_PRINT_EN[] PROGMEM = "Resuming print";
  1336. const char MSG_RESUMING_PRINT_CZ[] PROGMEM = "Obnovovani tisku";
  1337. const char * const MSG_RESUMING_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1338. MSG_RESUMING_PRINT_EN,
  1339. MSG_RESUMING_PRINT_CZ
  1340. };
  1341. const char MSG_RIGHT_EN[] PROGMEM = "Right:";
  1342. const char MSG_RIGHT_CZ[] PROGMEM = "Pravy:";
  1343. const char * const MSG_RIGHT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1344. MSG_RIGHT_EN,
  1345. MSG_RIGHT_CZ
  1346. };
  1347. const char MSG_SD_CANT_ENTER_SUBDIR_EN[] PROGMEM = "Cannot enter subdir: ";
  1348. const char * const MSG_SD_CANT_ENTER_SUBDIR_LANG_TABLE[1] PROGMEM = {
  1349. MSG_SD_CANT_ENTER_SUBDIR_EN
  1350. };
  1351. const char MSG_SD_CANT_OPEN_SUBDIR_EN[] PROGMEM = "Cannot open subdir";
  1352. const char * const MSG_SD_CANT_OPEN_SUBDIR_LANG_TABLE[1] PROGMEM = {
  1353. MSG_SD_CANT_OPEN_SUBDIR_EN
  1354. };
  1355. const char MSG_SD_CARD_OK_EN[] PROGMEM = "SD card ok";
  1356. const char * const MSG_SD_CARD_OK_LANG_TABLE[1] PROGMEM = {
  1357. MSG_SD_CARD_OK_EN
  1358. };
  1359. const char MSG_SD_ERR_WRITE_TO_FILE_EN[] PROGMEM = "error writing to file";
  1360. const char * const MSG_SD_ERR_WRITE_TO_FILE_LANG_TABLE[1] PROGMEM = {
  1361. MSG_SD_ERR_WRITE_TO_FILE_EN
  1362. };
  1363. const char MSG_SD_FILE_OPENED_EN[] PROGMEM = "File opened: ";
  1364. const char * const MSG_SD_FILE_OPENED_LANG_TABLE[1] PROGMEM = {
  1365. MSG_SD_FILE_OPENED_EN
  1366. };
  1367. const char MSG_SD_FILE_SELECTED_EN[] PROGMEM = "File selected";
  1368. const char * const MSG_SD_FILE_SELECTED_LANG_TABLE[1] PROGMEM = {
  1369. MSG_SD_FILE_SELECTED_EN
  1370. };
  1371. const char MSG_SD_INIT_FAIL_EN[] PROGMEM = "SD init fail";
  1372. const char * const MSG_SD_INIT_FAIL_LANG_TABLE[1] PROGMEM = {
  1373. MSG_SD_INIT_FAIL_EN
  1374. };
  1375. const char MSG_SD_INSERTED_EN[] PROGMEM = "Card inserted";
  1376. const char MSG_SD_INSERTED_CZ[] PROGMEM = "Karta vlozena";
  1377. const char * const MSG_SD_INSERTED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1378. MSG_SD_INSERTED_EN,
  1379. MSG_SD_INSERTED_CZ
  1380. };
  1381. const char MSG_SD_NOT_PRINTING_EN[] PROGMEM = "Not SD printing";
  1382. const char * const MSG_SD_NOT_PRINTING_LANG_TABLE[1] PROGMEM = {
  1383. MSG_SD_NOT_PRINTING_EN
  1384. };
  1385. const char MSG_SD_OPENROOT_FAIL_EN[] PROGMEM = "openRoot failed";
  1386. const char * const MSG_SD_OPENROOT_FAIL_LANG_TABLE[1] PROGMEM = {
  1387. MSG_SD_OPENROOT_FAIL_EN
  1388. };
  1389. const char MSG_SD_OPEN_FILE_FAIL_EN[] PROGMEM = "open failed, File: ";
  1390. const char * const MSG_SD_OPEN_FILE_FAIL_LANG_TABLE[1] PROGMEM = {
  1391. MSG_SD_OPEN_FILE_FAIL_EN
  1392. };
  1393. const char MSG_SD_PRINTING_BYTE_EN[] PROGMEM = "SD printing byte ";
  1394. const char * const MSG_SD_PRINTING_BYTE_LANG_TABLE[1] PROGMEM = {
  1395. MSG_SD_PRINTING_BYTE_EN
  1396. };
  1397. const char MSG_SD_REMOVED_EN[] PROGMEM = "Card removed";
  1398. const char MSG_SD_REMOVED_CZ[] PROGMEM = "Karta vyjmuta";
  1399. const char * const MSG_SD_REMOVED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1400. MSG_SD_REMOVED_EN,
  1401. MSG_SD_REMOVED_CZ
  1402. };
  1403. const char MSG_SD_SIZE_EN[] PROGMEM = " Size: ";
  1404. const char * const MSG_SD_SIZE_LANG_TABLE[1] PROGMEM = {
  1405. MSG_SD_SIZE_EN
  1406. };
  1407. const char MSG_SD_VOL_INIT_FAIL_EN[] PROGMEM = "volume.init failed";
  1408. const char * const MSG_SD_VOL_INIT_FAIL_LANG_TABLE[1] PROGMEM = {
  1409. MSG_SD_VOL_INIT_FAIL_EN
  1410. };
  1411. const char MSG_SD_WORKDIR_FAIL_EN[] PROGMEM = "workDir open failed";
  1412. const char * const MSG_SD_WORKDIR_FAIL_LANG_TABLE[1] PROGMEM = {
  1413. MSG_SD_WORKDIR_FAIL_EN
  1414. };
  1415. const char MSG_SD_WRITE_TO_FILE_EN[] PROGMEM = "Writing to file: ";
  1416. const char * const MSG_SD_WRITE_TO_FILE_LANG_TABLE[1] PROGMEM = {
  1417. MSG_SD_WRITE_TO_FILE_EN
  1418. };
  1419. const char MSG_SECOND_SERIAL_OFF_EN[] PROGMEM = "RPi port [off]";
  1420. const char MSG_SECOND_SERIAL_OFF_CZ[] PROGMEM = "RPi port [vyp]";
  1421. const char * const MSG_SECOND_SERIAL_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  1422. MSG_SECOND_SERIAL_OFF_EN,
  1423. MSG_SECOND_SERIAL_OFF_CZ
  1424. };
  1425. const char MSG_SECOND_SERIAL_ON_EN[] PROGMEM = "RPi port [on]";
  1426. const char MSG_SECOND_SERIAL_ON_CZ[] PROGMEM = "RPi port [zap]";
  1427. const char * const MSG_SECOND_SERIAL_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  1428. MSG_SECOND_SERIAL_ON_EN,
  1429. MSG_SECOND_SERIAL_ON_CZ
  1430. };
  1431. const char MSG_SELFTEST_EN[] PROGMEM = "Selftest ";
  1432. const char * const MSG_SELFTEST_LANG_TABLE[1] PROGMEM = {
  1433. MSG_SELFTEST_EN
  1434. };
  1435. const char MSG_SELFTEST_AXIS_EN[] PROGMEM = "Axis";
  1436. const char MSG_SELFTEST_AXIS_CZ[] PROGMEM = "Osa";
  1437. const char * const MSG_SELFTEST_AXIS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1438. MSG_SELFTEST_AXIS_EN,
  1439. MSG_SELFTEST_AXIS_CZ
  1440. };
  1441. const char MSG_SELFTEST_AXIS_LENGTH_EN[] PROGMEM = "Axis length";
  1442. const char MSG_SELFTEST_AXIS_LENGTH_CZ[] PROGMEM = "Delka osy";
  1443. const char * const MSG_SELFTEST_AXIS_LENGTH_LANG_TABLE[LANG_NUM] PROGMEM = {
  1444. MSG_SELFTEST_AXIS_LENGTH_EN,
  1445. MSG_SELFTEST_AXIS_LENGTH_CZ
  1446. };
  1447. const char MSG_SELFTEST_BEDHEATER_EN[] PROGMEM = "Bed / Heater";
  1448. const char * const MSG_SELFTEST_BEDHEATER_LANG_TABLE[1] PROGMEM = {
  1449. MSG_SELFTEST_BEDHEATER_EN
  1450. };
  1451. const char MSG_SELFTEST_CHECK_ALLCORRECT_EN[] PROGMEM = "All correct ";
  1452. const char MSG_SELFTEST_CHECK_ALLCORRECT_CZ[] PROGMEM = "Vse OK ";
  1453. const char * const MSG_SELFTEST_CHECK_ALLCORRECT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1454. MSG_SELFTEST_CHECK_ALLCORRECT_EN,
  1455. MSG_SELFTEST_CHECK_ALLCORRECT_CZ
  1456. };
  1457. const char MSG_SELFTEST_CHECK_BED_EN[] PROGMEM = "Checking bed ";
  1458. const char MSG_SELFTEST_CHECK_BED_CZ[] PROGMEM = "Kontrola bed ";
  1459. const char * const MSG_SELFTEST_CHECK_BED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1460. MSG_SELFTEST_CHECK_BED_EN,
  1461. MSG_SELFTEST_CHECK_BED_CZ
  1462. };
  1463. const char MSG_SELFTEST_CHECK_ENDSTOPS_EN[] PROGMEM = "Checking endstops";
  1464. const char MSG_SELFTEST_CHECK_ENDSTOPS_CZ[] PROGMEM = "Kontrola endstops";
  1465. const char * const MSG_SELFTEST_CHECK_ENDSTOPS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1466. MSG_SELFTEST_CHECK_ENDSTOPS_EN,
  1467. MSG_SELFTEST_CHECK_ENDSTOPS_CZ
  1468. };
  1469. const char MSG_SELFTEST_CHECK_FSENSOR_EN[] PROGMEM = "Checking sensors ";
  1470. const char MSG_SELFTEST_CHECK_FSENSOR_CZ[] PROGMEM = "Kontrola senzoru";
  1471. const char * const MSG_SELFTEST_CHECK_FSENSOR_LANG_TABLE[LANG_NUM] PROGMEM = {
  1472. MSG_SELFTEST_CHECK_FSENSOR_EN,
  1473. MSG_SELFTEST_CHECK_FSENSOR_CZ
  1474. };
  1475. const char MSG_SELFTEST_CHECK_HOTEND_EN[] PROGMEM = "Checking hotend ";
  1476. const char MSG_SELFTEST_CHECK_HOTEND_CZ[] PROGMEM = "Kontrola hotend ";
  1477. const char * const MSG_SELFTEST_CHECK_HOTEND_LANG_TABLE[LANG_NUM] PROGMEM = {
  1478. MSG_SELFTEST_CHECK_HOTEND_EN,
  1479. MSG_SELFTEST_CHECK_HOTEND_CZ
  1480. };
  1481. const char MSG_SELFTEST_CHECK_X_EN[] PROGMEM = "Checking X axis ";
  1482. const char MSG_SELFTEST_CHECK_X_CZ[] PROGMEM = "Kontrola X axis ";
  1483. const char * const MSG_SELFTEST_CHECK_X_LANG_TABLE[LANG_NUM] PROGMEM = {
  1484. MSG_SELFTEST_CHECK_X_EN,
  1485. MSG_SELFTEST_CHECK_X_CZ
  1486. };
  1487. const char MSG_SELFTEST_CHECK_Y_EN[] PROGMEM = "Checking Y axis ";
  1488. const char MSG_SELFTEST_CHECK_Y_CZ[] PROGMEM = "Kontrola Y axis ";
  1489. const char * const MSG_SELFTEST_CHECK_Y_LANG_TABLE[LANG_NUM] PROGMEM = {
  1490. MSG_SELFTEST_CHECK_Y_EN,
  1491. MSG_SELFTEST_CHECK_Y_CZ
  1492. };
  1493. const char MSG_SELFTEST_CHECK_Z_EN[] PROGMEM = "Checking Z axis ";
  1494. const char MSG_SELFTEST_CHECK_Z_CZ[] PROGMEM = "Kontrola Z axis ";
  1495. const char * const MSG_SELFTEST_CHECK_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
  1496. MSG_SELFTEST_CHECK_Z_EN,
  1497. MSG_SELFTEST_CHECK_Z_CZ
  1498. };
  1499. const char MSG_SELFTEST_COOLING_FAN_EN[] PROGMEM = "Front print fan?";
  1500. const char MSG_SELFTEST_COOLING_FAN_CZ[] PROGMEM = "Predni tiskovy vent?";
  1501. const char * const MSG_SELFTEST_COOLING_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
  1502. MSG_SELFTEST_COOLING_FAN_EN,
  1503. MSG_SELFTEST_COOLING_FAN_CZ
  1504. };
  1505. const char MSG_SELFTEST_ENDSTOP_EN[] PROGMEM = "Endstop";
  1506. const char * const MSG_SELFTEST_ENDSTOP_LANG_TABLE[1] PROGMEM = {
  1507. MSG_SELFTEST_ENDSTOP_EN
  1508. };
  1509. const char MSG_SELFTEST_ENDSTOPS_EN[] PROGMEM = "Endstops";
  1510. const char * const MSG_SELFTEST_ENDSTOPS_LANG_TABLE[1] PROGMEM = {
  1511. MSG_SELFTEST_ENDSTOPS_EN
  1512. };
  1513. const char MSG_SELFTEST_ENDSTOP_NOTHIT_EN[] PROGMEM = "Endstop not hit";
  1514. const char * const MSG_SELFTEST_ENDSTOP_NOTHIT_LANG_TABLE[1] PROGMEM = {
  1515. MSG_SELFTEST_ENDSTOP_NOTHIT_EN
  1516. };
  1517. const char MSG_SELFTEST_ERROR_EN[] PROGMEM = "Selftest error !";
  1518. const char * const MSG_SELFTEST_ERROR_LANG_TABLE[1] PROGMEM = {
  1519. MSG_SELFTEST_ERROR_EN
  1520. };
  1521. const char MSG_SELFTEST_EXTRUDER_FAN_EN[] PROGMEM = "Left hotend fan?";
  1522. const char MSG_SELFTEST_EXTRUDER_FAN_CZ[] PROGMEM = "Levy vent na trysce?";
  1523. const char * const MSG_SELFTEST_EXTRUDER_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
  1524. MSG_SELFTEST_EXTRUDER_FAN_EN,
  1525. MSG_SELFTEST_EXTRUDER_FAN_CZ
  1526. };
  1527. const char MSG_SELFTEST_EXTRUDER_FAN_SPEED_EN[] PROGMEM = "Extruder fan:";
  1528. const char MSG_SELFTEST_EXTRUDER_FAN_SPEED_CZ[] PROGMEM = "Levy vent.:";
  1529. const char * const MSG_SELFTEST_EXTRUDER_FAN_SPEED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1530. MSG_SELFTEST_EXTRUDER_FAN_SPEED_EN,
  1531. MSG_SELFTEST_EXTRUDER_FAN_SPEED_CZ
  1532. };
  1533. const char MSG_SELFTEST_FAILED_EN[] PROGMEM = "Selftest failed ";
  1534. const char MSG_SELFTEST_FAILED_CZ[] PROGMEM = "Selftest selhal ";
  1535. const char * const MSG_SELFTEST_FAILED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1536. MSG_SELFTEST_FAILED_EN,
  1537. MSG_SELFTEST_FAILED_CZ
  1538. };
  1539. const char MSG_SELFTEST_FAN_EN[] PROGMEM = "Fan test";
  1540. const char MSG_SELFTEST_FAN_CZ[] PROGMEM = "Test ventilatoru";
  1541. const char * const MSG_SELFTEST_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
  1542. MSG_SELFTEST_FAN_EN,
  1543. MSG_SELFTEST_FAN_CZ
  1544. };
  1545. const char MSG_SELFTEST_FANS_EN[] PROGMEM = "Front/left fans";
  1546. const char MSG_SELFTEST_FANS_CZ[] PROGMEM = "Predni/levy vent.";
  1547. const char * const MSG_SELFTEST_FANS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1548. MSG_SELFTEST_FANS_EN,
  1549. MSG_SELFTEST_FANS_CZ
  1550. };
  1551. const char MSG_SELFTEST_FAN_NO_EN[] PROGMEM = "Not spinning";
  1552. const char MSG_SELFTEST_FAN_NO_CZ[] PROGMEM = "Netoci se";
  1553. const char * const MSG_SELFTEST_FAN_NO_LANG_TABLE[LANG_NUM] PROGMEM = {
  1554. MSG_SELFTEST_FAN_NO_EN,
  1555. MSG_SELFTEST_FAN_NO_CZ
  1556. };
  1557. const char MSG_SELFTEST_FAN_YES_EN[] PROGMEM = "Spinning";
  1558. const char MSG_SELFTEST_FAN_YES_CZ[] PROGMEM = "Toci se";
  1559. const char * const MSG_SELFTEST_FAN_YES_LANG_TABLE[LANG_NUM] PROGMEM = {
  1560. MSG_SELFTEST_FAN_YES_EN,
  1561. MSG_SELFTEST_FAN_YES_CZ
  1562. };
  1563. const char MSG_SELFTEST_FILAMENT_SENSOR_EN[] PROGMEM = "Filament sensor:";
  1564. const char MSG_SELFTEST_FILAMENT_SENSOR_CZ[] PROGMEM = "Senzor filamentu:";
  1565. const char * const MSG_SELFTEST_FILAMENT_SENSOR_LANG_TABLE[LANG_NUM] PROGMEM = {
  1566. MSG_SELFTEST_FILAMENT_SENSOR_EN,
  1567. MSG_SELFTEST_FILAMENT_SENSOR_CZ
  1568. };
  1569. const char MSG_SELFTEST_HEATERTHERMISTOR_EN[] PROGMEM = "Heater/Thermistor";
  1570. const char * const MSG_SELFTEST_HEATERTHERMISTOR_LANG_TABLE[1] PROGMEM = {
  1571. MSG_SELFTEST_HEATERTHERMISTOR_EN
  1572. };
  1573. const char MSG_SELFTEST_MOTOR_EN[] PROGMEM = "Motor";
  1574. const char * const MSG_SELFTEST_MOTOR_LANG_TABLE[1] PROGMEM = {
  1575. MSG_SELFTEST_MOTOR_EN
  1576. };
  1577. const char MSG_SELFTEST_NOTCONNECTED_EN[] PROGMEM = "Not connected";
  1578. const char MSG_SELFTEST_NOTCONNECTED_CZ[] PROGMEM = "Nezapojeno ";
  1579. const char * const MSG_SELFTEST_NOTCONNECTED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1580. MSG_SELFTEST_NOTCONNECTED_EN,
  1581. MSG_SELFTEST_NOTCONNECTED_CZ
  1582. };
  1583. const char MSG_SELFTEST_OK_EN[] PROGMEM = "Self test OK";
  1584. const char * const MSG_SELFTEST_OK_LANG_TABLE[1] PROGMEM = {
  1585. MSG_SELFTEST_OK_EN
  1586. };
  1587. const char MSG_SELFTEST_PLEASECHECK_EN[] PROGMEM = "Please check :";
  1588. const char MSG_SELFTEST_PLEASECHECK_CZ[] PROGMEM = "Zkontrolujte :";
  1589. const char * const MSG_SELFTEST_PLEASECHECK_LANG_TABLE[LANG_NUM] PROGMEM = {
  1590. MSG_SELFTEST_PLEASECHECK_EN,
  1591. MSG_SELFTEST_PLEASECHECK_CZ
  1592. };
  1593. const char MSG_SELFTEST_PRINT_FAN_SPEED_EN[] PROGMEM = "Print fan:";
  1594. const char MSG_SELFTEST_PRINT_FAN_SPEED_CZ[] PROGMEM = "Tiskovy vent.:";
  1595. const char * const MSG_SELFTEST_PRINT_FAN_SPEED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1596. MSG_SELFTEST_PRINT_FAN_SPEED_EN,
  1597. MSG_SELFTEST_PRINT_FAN_SPEED_CZ
  1598. };
  1599. const char MSG_SELFTEST_START_EN[] PROGMEM = "Self test start ";
  1600. const char * const MSG_SELFTEST_START_LANG_TABLE[1] PROGMEM = {
  1601. MSG_SELFTEST_START_EN
  1602. };
  1603. const char MSG_SELFTEST_SWAPPED_EN[] PROGMEM = "Swapped";
  1604. const char MSG_SELFTEST_SWAPPED_CZ[] PROGMEM = "Prohozene";
  1605. const char * const MSG_SELFTEST_SWAPPED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1606. MSG_SELFTEST_SWAPPED_EN,
  1607. MSG_SELFTEST_SWAPPED_CZ
  1608. };
  1609. const char MSG_SELFTEST_WIRINGERROR_EN[] PROGMEM = "Wiring error";
  1610. const char MSG_SELFTEST_WIRINGERROR_CZ[] PROGMEM = "Chyba zapojeni";
  1611. const char * const MSG_SELFTEST_WIRINGERROR_LANG_TABLE[LANG_NUM] PROGMEM = {
  1612. MSG_SELFTEST_WIRINGERROR_EN,
  1613. MSG_SELFTEST_WIRINGERROR_CZ
  1614. };
  1615. const char MSG_SERIAL_ERROR_MENU_STRUCTURE_EN[] PROGMEM = "Error in menu structure";
  1616. const char * const MSG_SERIAL_ERROR_MENU_STRUCTURE_LANG_TABLE[1] PROGMEM = {
  1617. MSG_SERIAL_ERROR_MENU_STRUCTURE_EN
  1618. };
  1619. const char MSG_SETTINGS_EN[] PROGMEM = "Settings";
  1620. const char MSG_SETTINGS_CZ[] PROGMEM = "Nastaveni";
  1621. const char * const MSG_SETTINGS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1622. MSG_SETTINGS_EN,
  1623. MSG_SETTINGS_CZ
  1624. };
  1625. const char MSG_SET_HOME_OFFSETS_EN[] PROGMEM = "Set home offsets";
  1626. const char * const MSG_SET_HOME_OFFSETS_LANG_TABLE[1] PROGMEM = {
  1627. MSG_SET_HOME_OFFSETS_EN
  1628. };
  1629. const char MSG_SET_ORIGIN_EN[] PROGMEM = "Set origin";
  1630. const char * const MSG_SET_ORIGIN_LANG_TABLE[1] PROGMEM = {
  1631. MSG_SET_ORIGIN_EN
  1632. };
  1633. const char MSG_SET_TEMPERATURE_EN[] PROGMEM = "Set temperature:";
  1634. const char MSG_SET_TEMPERATURE_CZ[] PROGMEM = "Nastavte teplotu:";
  1635. const char * const MSG_SET_TEMPERATURE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1636. MSG_SET_TEMPERATURE_EN,
  1637. MSG_SET_TEMPERATURE_CZ
  1638. };
  1639. const char MSG_SEVERE_SKEW_EN[] PROGMEM = "Severe skew:";
  1640. const char MSG_SEVERE_SKEW_CZ[] PROGMEM = "Tezke zkoseni:";
  1641. const char * const MSG_SEVERE_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
  1642. MSG_SEVERE_SKEW_EN,
  1643. MSG_SEVERE_SKEW_CZ
  1644. };
  1645. const char MSG_SHOW_END_STOPS_EN[] PROGMEM = "Show end stops";
  1646. const char MSG_SHOW_END_STOPS_CZ[] PROGMEM = "Stav konc. spin.";
  1647. const char * const MSG_SHOW_END_STOPS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1648. MSG_SHOW_END_STOPS_EN,
  1649. MSG_SHOW_END_STOPS_CZ
  1650. };
  1651. const char MSG_SILENT_MODE_OFF_EN[] PROGMEM = "Mode [Normal]";
  1652. const char MSG_SILENT_MODE_OFF_CZ[] PROGMEM = "Mod [Normal]";
  1653. const char * const MSG_SILENT_MODE_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  1654. MSG_SILENT_MODE_OFF_EN,
  1655. MSG_SILENT_MODE_OFF_CZ
  1656. };
  1657. const char MSG_SILENT_MODE_ON_EN[] PROGMEM = "Mode [Stealth]";
  1658. const char MSG_SILENT_MODE_ON_CZ[] PROGMEM = "Mod [Stealth]";
  1659. const char * const MSG_SILENT_MODE_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  1660. MSG_SILENT_MODE_ON_EN,
  1661. MSG_SILENT_MODE_ON_CZ
  1662. };
  1663. const char MSG_SLIGHT_SKEW_EN[] PROGMEM = "Slight skew:";
  1664. const char MSG_SLIGHT_SKEW_CZ[] PROGMEM = "Lehke zkoseni:";
  1665. const char * const MSG_SLIGHT_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
  1666. MSG_SLIGHT_SKEW_EN,
  1667. MSG_SLIGHT_SKEW_CZ
  1668. };
  1669. const char MSG_SOFTWARE_RESET_EN[] PROGMEM = " Software Reset";
  1670. const char * const MSG_SOFTWARE_RESET_LANG_TABLE[1] PROGMEM = {
  1671. MSG_SOFTWARE_RESET_EN
  1672. };
  1673. const char MSG_SORTING_EN[] PROGMEM = "Sorting files";
  1674. const char MSG_SORTING_CZ[] PROGMEM = "Trideni souboru";
  1675. const char * const MSG_SORTING_LANG_TABLE[LANG_NUM] PROGMEM = {
  1676. MSG_SORTING_EN,
  1677. MSG_SORTING_CZ
  1678. };
  1679. const char MSG_SORT_ALPHA_EN[] PROGMEM = "Sort: [Alphabet]";
  1680. const char MSG_SORT_ALPHA_CZ[] PROGMEM = "Trideni [Abeceda]";
  1681. const char * const MSG_SORT_ALPHA_LANG_TABLE[LANG_NUM] PROGMEM = {
  1682. MSG_SORT_ALPHA_EN,
  1683. MSG_SORT_ALPHA_CZ
  1684. };
  1685. const char MSG_SORT_NONE_EN[] PROGMEM = "Sort: [None]";
  1686. const char MSG_SORT_NONE_CZ[] PROGMEM = "Trideni [Zadne]";
  1687. const char * const MSG_SORT_NONE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1688. MSG_SORT_NONE_EN,
  1689. MSG_SORT_NONE_CZ
  1690. };
  1691. const char MSG_SORT_TIME_EN[] PROGMEM = "Sort: [Time]";
  1692. const char MSG_SORT_TIME_CZ[] PROGMEM = "Trideni [Cas]";
  1693. const char * const MSG_SORT_TIME_LANG_TABLE[LANG_NUM] PROGMEM = {
  1694. MSG_SORT_TIME_EN,
  1695. MSG_SORT_TIME_CZ
  1696. };
  1697. const char MSG_SPEED_EN[] PROGMEM = "Speed";
  1698. const char MSG_SPEED_CZ[] PROGMEM = "Rychlost";
  1699. const char * const MSG_SPEED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1700. MSG_SPEED_EN,
  1701. MSG_SPEED_CZ
  1702. };
  1703. const char MSG_STACK_ERROR_EN[] PROGMEM = "Error - static memory has been overwritten";
  1704. const char MSG_STACK_ERROR_CZ[] PROGMEM = "Chyba - Doslo k prepisu staticke pameti!";
  1705. const char * const MSG_STACK_ERROR_LANG_TABLE[LANG_NUM] PROGMEM = {
  1706. MSG_STACK_ERROR_EN,
  1707. MSG_STACK_ERROR_CZ
  1708. };
  1709. const char MSG_STATISTICS_EN[] PROGMEM = "Statistics ";
  1710. const char MSG_STATISTICS_CZ[] PROGMEM = "Statistika ";
  1711. const char * const MSG_STATISTICS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1712. MSG_STATISTICS_EN,
  1713. MSG_STATISTICS_CZ
  1714. };
  1715. const char MSG_STATS_FILAMENTUSED_EN[] PROGMEM = "Filament used: ";
  1716. const char MSG_STATS_FILAMENTUSED_CZ[] PROGMEM = "Filament : ";
  1717. const char * const MSG_STATS_FILAMENTUSED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1718. MSG_STATS_FILAMENTUSED_EN,
  1719. MSG_STATS_FILAMENTUSED_CZ
  1720. };
  1721. const char MSG_STATS_PRINTTIME_EN[] PROGMEM = "Print time: ";
  1722. const char MSG_STATS_PRINTTIME_CZ[] PROGMEM = "Cas tisku : ";
  1723. const char * const MSG_STATS_PRINTTIME_LANG_TABLE[LANG_NUM] PROGMEM = {
  1724. MSG_STATS_PRINTTIME_EN,
  1725. MSG_STATS_PRINTTIME_CZ
  1726. };
  1727. const char MSG_STATS_TOTALFILAMENT_EN[] PROGMEM = "Total filament :";
  1728. const char MSG_STATS_TOTALFILAMENT_CZ[] PROGMEM = "Filament celkem :";
  1729. const char * const MSG_STATS_TOTALFILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1730. MSG_STATS_TOTALFILAMENT_EN,
  1731. MSG_STATS_TOTALFILAMENT_CZ
  1732. };
  1733. const char MSG_STATS_TOTALPRINTTIME_EN[] PROGMEM = "Total print time :";
  1734. const char MSG_STATS_TOTALPRINTTIME_CZ[] PROGMEM = "Celkovy cas :";
  1735. const char * const MSG_STATS_TOTALPRINTTIME_LANG_TABLE[LANG_NUM] PROGMEM = {
  1736. MSG_STATS_TOTALPRINTTIME_EN,
  1737. MSG_STATS_TOTALPRINTTIME_CZ
  1738. };
  1739. const char MSG_STEEL_SHEET_CHECK_EN[] PROGMEM = "Is steel sheet on heatbed?";
  1740. const char MSG_STEEL_SHEET_CHECK_CZ[] PROGMEM = "Je tiskovy plat na heatbed?";
  1741. const char * const MSG_STEEL_SHEET_CHECK_LANG_TABLE[LANG_NUM] PROGMEM = {
  1742. MSG_STEEL_SHEET_CHECK_EN,
  1743. MSG_STEEL_SHEET_CHECK_CZ
  1744. };
  1745. const char MSG_STEPPER_TIMER_OVERFLOW_ERROR_EN[] PROGMEM = "Error - stepper timer overflow";
  1746. const char * const MSG_STEPPER_TIMER_OVERFLOW_ERROR_LANG_TABLE[1] PROGMEM = {
  1747. MSG_STEPPER_TIMER_OVERFLOW_ERROR_EN
  1748. };
  1749. const char MSG_STEPPER_TOO_HIGH_EN[] PROGMEM = "Steprate too high: ";
  1750. const char * const MSG_STEPPER_TOO_HIGH_LANG_TABLE[1] PROGMEM = {
  1751. MSG_STEPPER_TOO_HIGH_EN
  1752. };
  1753. const char MSG_STOPPED_EN[] PROGMEM = "STOPPED. ";
  1754. const char * const MSG_STOPPED_LANG_TABLE[1] PROGMEM = {
  1755. MSG_STOPPED_EN
  1756. };
  1757. const char MSG_STOP_PRINT_EN[] PROGMEM = "Stop print";
  1758. const char MSG_STOP_PRINT_CZ[] PROGMEM = "Zastavit tisk";
  1759. const char * const MSG_STOP_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1760. MSG_STOP_PRINT_EN,
  1761. MSG_STOP_PRINT_CZ
  1762. };
  1763. const char MSG_STORE_EPROM_EN[] PROGMEM = "Store memory";
  1764. const char * const MSG_STORE_EPROM_LANG_TABLE[1] PROGMEM = {
  1765. MSG_STORE_EPROM_EN
  1766. };
  1767. const char MSG_SUPPORT_EN[] PROGMEM = "Support";
  1768. const char MSG_SUPPORT_CZ[] PROGMEM = "Podpora";
  1769. const char * const MSG_SUPPORT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1770. MSG_SUPPORT_EN,
  1771. MSG_SUPPORT_CZ
  1772. };
  1773. const char MSG_SWITCH_PS_OFF_EN[] PROGMEM = "Switch power off";
  1774. const char MSG_SWITCH_PS_OFF_CZ[] PROGMEM = "Zapnout zdroj";
  1775. const char * const MSG_SWITCH_PS_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  1776. MSG_SWITCH_PS_OFF_EN,
  1777. MSG_SWITCH_PS_OFF_CZ
  1778. };
  1779. const char MSG_SWITCH_PS_ON_EN[] PROGMEM = "Switch power on";
  1780. const char MSG_SWITCH_PS_ON_CZ[] PROGMEM = "Vypnout zdroj";
  1781. const char * const MSG_SWITCH_PS_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  1782. MSG_SWITCH_PS_ON_EN,
  1783. MSG_SWITCH_PS_ON_CZ
  1784. };
  1785. const char MSG_TAKE_EFFECT_EN[] PROGMEM = " for take effect";
  1786. const char MSG_TAKE_EFFECT_CZ[] PROGMEM = " pro projeveni zmen";
  1787. const char * const MSG_TAKE_EFFECT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1788. MSG_TAKE_EFFECT_EN,
  1789. MSG_TAKE_EFFECT_CZ
  1790. };
  1791. const char MSG_TEMPERATURE_EN[] PROGMEM = "Temperature";
  1792. const char MSG_TEMPERATURE_CZ[] PROGMEM = "Teplota";
  1793. const char * const MSG_TEMPERATURE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1794. MSG_TEMPERATURE_EN,
  1795. MSG_TEMPERATURE_CZ
  1796. };
  1797. const char MSG_TEMP_CALIBRATION_EN[] PROGMEM = "Temp. cal. ";
  1798. const char MSG_TEMP_CALIBRATION_CZ[] PROGMEM = "Tepl. kal. ";
  1799. const char * const MSG_TEMP_CALIBRATION_LANG_TABLE[LANG_NUM] PROGMEM = {
  1800. MSG_TEMP_CALIBRATION_EN,
  1801. MSG_TEMP_CALIBRATION_CZ
  1802. };
  1803. const char MSG_TEMP_CALIBRATION_DONE_EN[] PROGMEM = "Temperature calibration is finished. Click to continue.";
  1804. const char MSG_TEMP_CALIBRATION_DONE_CZ[] PROGMEM = "Teplotni kalibrace dokoncena. Pokracujte stiskem tlacitka.";
  1805. const char * const MSG_TEMP_CALIBRATION_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1806. MSG_TEMP_CALIBRATION_DONE_EN,
  1807. MSG_TEMP_CALIBRATION_DONE_CZ
  1808. };
  1809. const char MSG_TEMP_CALIBRATION_OFF_EN[] PROGMEM = "Temp. cal. [off]";
  1810. const char MSG_TEMP_CALIBRATION_OFF_CZ[] PROGMEM = "Tepl. kal. [vyp]";
  1811. const char * const MSG_TEMP_CALIBRATION_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  1812. MSG_TEMP_CALIBRATION_OFF_EN,
  1813. MSG_TEMP_CALIBRATION_OFF_CZ
  1814. };
  1815. const char MSG_TEMP_CALIBRATION_ON_EN[] PROGMEM = "Temp. cal. [on]";
  1816. const char MSG_TEMP_CALIBRATION_ON_CZ[] PROGMEM = "Tepl. kal. [zap]";
  1817. const char * const MSG_TEMP_CALIBRATION_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  1818. MSG_TEMP_CALIBRATION_ON_EN,
  1819. MSG_TEMP_CALIBRATION_ON_CZ
  1820. };
  1821. const char MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF_EN[] PROGMEM = "SD card [normal]";
  1822. const char * const MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF_LANG_TABLE[1] PROGMEM = {
  1823. MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF_EN
  1824. };
  1825. const char MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON_EN[] PROGMEM = "SD card [FlshAir]";
  1826. const char * const MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON_LANG_TABLE[1] PROGMEM = {
  1827. MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON_EN
  1828. };
  1829. const char MSG_TUNE_EN[] PROGMEM = "Tune";
  1830. const char MSG_TUNE_CZ[] PROGMEM = "Ladit";
  1831. const char * const MSG_TUNE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1832. MSG_TUNE_EN,
  1833. MSG_TUNE_CZ
  1834. };
  1835. const char MSG_UNKNOWN_COMMAND_EN[] PROGMEM = "Unknown command: \"";
  1836. const char * const MSG_UNKNOWN_COMMAND_LANG_TABLE[1] PROGMEM = {
  1837. MSG_UNKNOWN_COMMAND_EN
  1838. };
  1839. const char MSG_UNLOADING_FILAMENT_EN[] PROGMEM = "Unloading filament";
  1840. const char MSG_UNLOADING_FILAMENT_CZ[] PROGMEM = "Vysouvam filament";
  1841. const char * const MSG_UNLOADING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1842. MSG_UNLOADING_FILAMENT_EN,
  1843. MSG_UNLOADING_FILAMENT_CZ
  1844. };
  1845. const char MSG_UNLOAD_ALL_EN[] PROGMEM = "Unload all";
  1846. const char MSG_UNLOAD_ALL_CZ[] PROGMEM = "Vyjmout vse";
  1847. const char * const MSG_UNLOAD_ALL_LANG_TABLE[LANG_NUM] PROGMEM = {
  1848. MSG_UNLOAD_ALL_EN,
  1849. MSG_UNLOAD_ALL_CZ
  1850. };
  1851. const char MSG_UNLOAD_FILAMENT_EN[] PROGMEM = "Unload filament";
  1852. const char MSG_UNLOAD_FILAMENT_CZ[] PROGMEM = "Vyjmout filament";
  1853. const char * const MSG_UNLOAD_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1854. MSG_UNLOAD_FILAMENT_EN,
  1855. MSG_UNLOAD_FILAMENT_CZ
  1856. };
  1857. const char MSG_UNLOAD_FILAMENT_1_EN[] PROGMEM = "Unload filament 1";
  1858. const char MSG_UNLOAD_FILAMENT_1_CZ[] PROGMEM = "Vyjmout filam. 1";
  1859. const char * const MSG_UNLOAD_FILAMENT_1_LANG_TABLE[LANG_NUM] PROGMEM = {
  1860. MSG_UNLOAD_FILAMENT_1_EN,
  1861. MSG_UNLOAD_FILAMENT_1_CZ
  1862. };
  1863. const char MSG_UNLOAD_FILAMENT_2_EN[] PROGMEM = "Unload filament 2";
  1864. const char MSG_UNLOAD_FILAMENT_2_CZ[] PROGMEM = "Vyjmout filam. 2";
  1865. const char * const MSG_UNLOAD_FILAMENT_2_LANG_TABLE[LANG_NUM] PROGMEM = {
  1866. MSG_UNLOAD_FILAMENT_2_EN,
  1867. MSG_UNLOAD_FILAMENT_2_CZ
  1868. };
  1869. const char MSG_UNLOAD_FILAMENT_3_EN[] PROGMEM = "Unload filament 3";
  1870. const char MSG_UNLOAD_FILAMENT_3_CZ[] PROGMEM = "Vyjmout filam. 3";
  1871. const char * const MSG_UNLOAD_FILAMENT_3_LANG_TABLE[LANG_NUM] PROGMEM = {
  1872. MSG_UNLOAD_FILAMENT_3_EN,
  1873. MSG_UNLOAD_FILAMENT_3_CZ
  1874. };
  1875. const char MSG_UNLOAD_FILAMENT_4_EN[] PROGMEM = "Unload filament 4";
  1876. const char MSG_UNLOAD_FILAMENT_4_CZ[] PROGMEM = "Vyjmout filam. 4";
  1877. const char * const MSG_UNLOAD_FILAMENT_4_LANG_TABLE[LANG_NUM] PROGMEM = {
  1878. MSG_UNLOAD_FILAMENT_4_EN,
  1879. MSG_UNLOAD_FILAMENT_4_CZ
  1880. };
  1881. const char MSG_UNLOAD_SUCCESSFULL_EN[] PROGMEM = "Was filament unload successfull?";
  1882. const char MSG_UNLOAD_SUCCESSFULL_CZ[] PROGMEM = "Bylo vysunuti filamentu uspesne?";
  1883. const char * const MSG_UNLOAD_SUCCESSFULL_LANG_TABLE[LANG_NUM] PROGMEM = {
  1884. MSG_UNLOAD_SUCCESSFULL_EN,
  1885. MSG_UNLOAD_SUCCESSFULL_CZ
  1886. };
  1887. const char MSG_USB_PRINTING_EN[] PROGMEM = "USB printing ";
  1888. const char MSG_USB_PRINTING_CZ[] PROGMEM = "Tisk z USB ";
  1889. const char * const MSG_USB_PRINTING_LANG_TABLE[LANG_NUM] PROGMEM = {
  1890. MSG_USB_PRINTING_EN,
  1891. MSG_USB_PRINTING_CZ
  1892. };
  1893. const char MSG_USED_EN[] PROGMEM = "Used during print";
  1894. const char MSG_USED_CZ[] PROGMEM = "Pouzite behem tisku";
  1895. const char * const MSG_USED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1896. MSG_USED_EN,
  1897. MSG_USED_CZ
  1898. };
  1899. const char MSG_USERWAIT_EN[] PROGMEM = "Wait for user...";
  1900. const char * const MSG_USERWAIT_LANG_TABLE[1] PROGMEM = {
  1901. MSG_USERWAIT_EN
  1902. };
  1903. const char MSG_V2_CALIBRATION_EN[] PROGMEM = "First layer cal.";
  1904. const char MSG_V2_CALIBRATION_CZ[] PROGMEM = "Kal. prvni vrstvy";
  1905. const char * const MSG_V2_CALIBRATION_LANG_TABLE[LANG_NUM] PROGMEM = {
  1906. MSG_V2_CALIBRATION_EN,
  1907. MSG_V2_CALIBRATION_CZ
  1908. };
  1909. const char MSG_VMIN_EN[] PROGMEM = "Vmin";
  1910. const char * const MSG_VMIN_LANG_TABLE[1] PROGMEM = {
  1911. MSG_VMIN_EN
  1912. };
  1913. const char MSG_VOLUMETRIC_EN[] PROGMEM = "Filament";
  1914. const char * const MSG_VOLUMETRIC_LANG_TABLE[1] PROGMEM = {
  1915. MSG_VOLUMETRIC_EN
  1916. };
  1917. const char MSG_VOLUMETRIC_ENABLED_EN[] PROGMEM = "E in mm3";
  1918. const char * const MSG_VOLUMETRIC_ENABLED_LANG_TABLE[1] PROGMEM = {
  1919. MSG_VOLUMETRIC_ENABLED_EN
  1920. };
  1921. const char MSG_VTRAV_MIN_EN[] PROGMEM = "VTrav min";
  1922. const char * const MSG_VTRAV_MIN_LANG_TABLE[1] PROGMEM = {
  1923. MSG_VTRAV_MIN_EN
  1924. };
  1925. const char MSG_WAITING_TEMP_EN[] PROGMEM = "Waiting for nozzle and bed cooling";
  1926. const char MSG_WAITING_TEMP_CZ[] PROGMEM = "Cekani na zchladnuti trysky a podlozky.";
  1927. const char * const MSG_WAITING_TEMP_LANG_TABLE[LANG_NUM] PROGMEM = {
  1928. MSG_WAITING_TEMP_EN,
  1929. MSG_WAITING_TEMP_CZ
  1930. };
  1931. const char MSG_WATCH_EN[] PROGMEM = "Info screen";
  1932. const char MSG_WATCH_CZ[] PROGMEM = "Informace";
  1933. const char * const MSG_WATCH_LANG_TABLE[LANG_NUM] PROGMEM = {
  1934. MSG_WATCH_EN,
  1935. MSG_WATCH_CZ
  1936. };
  1937. const char MSG_WATCHDOG_RESET_EN[] PROGMEM = " Watchdog Reset";
  1938. const char * const MSG_WATCHDOG_RESET_LANG_TABLE[1] PROGMEM = {
  1939. MSG_WATCHDOG_RESET_EN
  1940. };
  1941. const char MSG_WIZARD_EN[] PROGMEM = "Wizard";
  1942. const char * const MSG_WIZARD_LANG_TABLE[1] PROGMEM = {
  1943. MSG_WIZARD_EN
  1944. };
  1945. const char MSG_WIZARD_CALIBRATION_FAILED_EN[] PROGMEM = "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer.";
  1946. const char MSG_WIZARD_CALIBRATION_FAILED_CZ[] PROGMEM = "Prosim nahlednete do manualu a opravte problem. Po te obnovte Wizarda rebootovanim tiskarny.";
  1947. const char * const MSG_WIZARD_CALIBRATION_FAILED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1948. MSG_WIZARD_CALIBRATION_FAILED_EN,
  1949. MSG_WIZARD_CALIBRATION_FAILED_CZ
  1950. };
  1951. const char MSG_WIZARD_CLEAN_HEATBED_EN[] PROGMEM = "Please clean heatbed and then press the knob.";
  1952. const char MSG_WIZARD_CLEAN_HEATBED_CZ[] PROGMEM = "Prosim ocistete heatbed a stisknete tlacitko.";
  1953. const char * const MSG_WIZARD_CLEAN_HEATBED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1954. MSG_WIZARD_CLEAN_HEATBED_EN,
  1955. MSG_WIZARD_CLEAN_HEATBED_CZ
  1956. };
  1957. const char MSG_WIZARD_DONE_EN[] PROGMEM = "All is done. Happy printing!";
  1958. const char MSG_WIZARD_DONE_CZ[] PROGMEM = "Vse je hotovo.";
  1959. const char * const MSG_WIZARD_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1960. MSG_WIZARD_DONE_EN,
  1961. MSG_WIZARD_DONE_CZ
  1962. };
  1963. const char MSG_WIZARD_FILAMENT_LOADED_EN[] PROGMEM = "Is filament loaded?";
  1964. const char MSG_WIZARD_FILAMENT_LOADED_CZ[] PROGMEM = "Je filament zaveden?";
  1965. const char * const MSG_WIZARD_FILAMENT_LOADED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1966. MSG_WIZARD_FILAMENT_LOADED_EN,
  1967. MSG_WIZARD_FILAMENT_LOADED_CZ
  1968. };
  1969. const char MSG_WIZARD_HEATING_EN[] PROGMEM = "Preheating nozzle. Please wait.";
  1970. const char MSG_WIZARD_HEATING_CZ[] PROGMEM = "Predehrivam trysku. Prosim cekejte.";
  1971. const char * const MSG_WIZARD_HEATING_LANG_TABLE[LANG_NUM] PROGMEM = {
  1972. MSG_WIZARD_HEATING_EN,
  1973. MSG_WIZARD_HEATING_CZ
  1974. };
  1975. const char MSG_WIZARD_INSERT_CORRECT_FILAMENT_EN[] PROGMEM = "Please load PLA filament and then resume Wizard by rebooting the printer.";
  1976. const char MSG_WIZARD_INSERT_CORRECT_FILAMENT_CZ[] PROGMEM = "Prosim zavedte PLA filament a po te obnovte Wizarda stisknutim reset tlacitka.";
  1977. const char * const MSG_WIZARD_INSERT_CORRECT_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1978. MSG_WIZARD_INSERT_CORRECT_FILAMENT_EN,
  1979. MSG_WIZARD_INSERT_CORRECT_FILAMENT_CZ
  1980. };
  1981. const char MSG_WIZARD_LOAD_FILAMENT_EN[] PROGMEM = "Please insert PLA filament to the extruder, then press knob to load it.";
  1982. const char MSG_WIZARD_LOAD_FILAMENT_CZ[] PROGMEM = "Prosim vlozte PLA filament do extruderu, po te stisknete tlacitko pro zavedeni filamentu.";
  1983. const char * const MSG_WIZARD_LOAD_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1984. MSG_WIZARD_LOAD_FILAMENT_EN,
  1985. MSG_WIZARD_LOAD_FILAMENT_CZ
  1986. };
  1987. const char MSG_WIZARD_PLA_FILAMENT_EN[] PROGMEM = "Is it PLA filament?";
  1988. const char MSG_WIZARD_PLA_FILAMENT_CZ[] PROGMEM = "Je to PLA filament?";
  1989. const char * const MSG_WIZARD_PLA_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1990. MSG_WIZARD_PLA_FILAMENT_EN,
  1991. MSG_WIZARD_PLA_FILAMENT_CZ
  1992. };
  1993. const char MSG_WIZARD_QUIT_EN[] PROGMEM = "You can always resume the Wizard from Calibration -> Wizard.";
  1994. const char MSG_WIZARD_QUIT_CZ[] PROGMEM = "Wizarda muzete kdykoliv znovu spustit z menu Calibration -> Wizard";
  1995. const char * const MSG_WIZARD_QUIT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1996. MSG_WIZARD_QUIT_EN,
  1997. MSG_WIZARD_QUIT_CZ
  1998. };
  1999. const char MSG_WIZARD_REPEAT_V2_CAL_EN[] PROGMEM = "Do you want to repeat last step to readjust distance between nozzle and heatbed?";
  2000. const char MSG_WIZARD_REPEAT_V2_CAL_CZ[] PROGMEM = "Chcete opakovat posledni krok a pozmenit vzdalenost mezi tryskou a heatbed?";
  2001. const char * const MSG_WIZARD_REPEAT_V2_CAL_LANG_TABLE[LANG_NUM] PROGMEM = {
  2002. MSG_WIZARD_REPEAT_V2_CAL_EN,
  2003. MSG_WIZARD_REPEAT_V2_CAL_CZ
  2004. };
  2005. const char MSG_WIZARD_RERUN_EN[] PROGMEM = "Running Wizard will delete current calibration results and start from the beginning. Continue?";
  2006. const char MSG_WIZARD_RERUN_CZ[] PROGMEM = "Spusteni Wizarda vymaze ulozene vysledky vsech kalibraci a spusti kalibracni proces od zacatku. Pokracovat?";
  2007. const char * const MSG_WIZARD_RERUN_LANG_TABLE[LANG_NUM] PROGMEM = {
  2008. MSG_WIZARD_RERUN_EN,
  2009. MSG_WIZARD_RERUN_CZ
  2010. };
  2011. const char MSG_WIZARD_SELFTEST_EN[] PROGMEM = "First, I will run the selftest to check most common assembly problems.";
  2012. const char MSG_WIZARD_SELFTEST_CZ[] PROGMEM = "Nejdriv pomoci selftestu zkontoluji nejcastejsi chyby vznikajici pri sestaveni tiskarny.";
  2013. const char * const MSG_WIZARD_SELFTEST_LANG_TABLE[LANG_NUM] PROGMEM = {
  2014. MSG_WIZARD_SELFTEST_EN,
  2015. MSG_WIZARD_SELFTEST_CZ
  2016. };
  2017. const char MSG_WIZARD_V2_CAL_EN[] PROGMEM = "Now I will calibrate distance between tip of the nozzle and heatbed surface.";
  2018. const char MSG_WIZARD_V2_CAL_CZ[] PROGMEM = "Nyni zkalibruji vzdalenost mezi koncem trysky a povrchem heatbedu.";
  2019. const char * const MSG_WIZARD_V2_CAL_LANG_TABLE[LANG_NUM] PROGMEM = {
  2020. MSG_WIZARD_V2_CAL_EN,
  2021. MSG_WIZARD_V2_CAL_CZ
  2022. };
  2023. const char MSG_WIZARD_V2_CAL_2_EN[] PROGMEM = "I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration.";
  2024. const char MSG_WIZARD_V2_CAL_2_CZ[] PROGMEM = "Zacnu tisknout linku a Vy budete postupne snizovat trysku otacenim tlacitka dokud nedosahnete optimalni vysky. Prohlednete si obrazky v nasi prirucce v kapitole Kalibrace";
  2025. const char * const MSG_WIZARD_V2_CAL_2_LANG_TABLE[LANG_NUM] PROGMEM = {
  2026. MSG_WIZARD_V2_CAL_2_EN,
  2027. MSG_WIZARD_V2_CAL_2_CZ
  2028. };
  2029. const char MSG_WIZARD_WELCOME_EN[] PROGMEM = "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?";
  2030. const char MSG_WIZARD_WELCOME_CZ[] PROGMEM = "Dobry den, jsem vase tiskarna Original Prusa i3. Chcete abych Vas provedla kalibracnim procesem?";
  2031. const char * const MSG_WIZARD_WELCOME_LANG_TABLE[LANG_NUM] PROGMEM = {
  2032. MSG_WIZARD_WELCOME_EN,
  2033. MSG_WIZARD_WELCOME_CZ
  2034. };
  2035. const char MSG_WIZARD_WILL_PREHEAT_EN[] PROGMEM = "Now I will preheat nozzle for PLA.";
  2036. const char MSG_WIZARD_WILL_PREHEAT_CZ[] PROGMEM = "Nyni predehreji trysku pro PLA.";
  2037. const char * const MSG_WIZARD_WILL_PREHEAT_LANG_TABLE[LANG_NUM] PROGMEM = {
  2038. MSG_WIZARD_WILL_PREHEAT_EN,
  2039. MSG_WIZARD_WILL_PREHEAT_CZ
  2040. };
  2041. const char MSG_WIZARD_XYZ_CAL_EN[] PROGMEM = "I will run xyz calibration now. It will take approx. 12 mins.";
  2042. const char MSG_WIZARD_XYZ_CAL_CZ[] PROGMEM = "Nyni provedu xyz kalibraci. Zabere to priblizne 12 min.";
  2043. const char * const MSG_WIZARD_XYZ_CAL_LANG_TABLE[LANG_NUM] PROGMEM = {
  2044. MSG_WIZARD_XYZ_CAL_EN,
  2045. MSG_WIZARD_XYZ_CAL_CZ
  2046. };
  2047. const char MSG_WIZARD_Z_CAL_EN[] PROGMEM = "I will run z calibration now.";
  2048. const char MSG_WIZARD_Z_CAL_CZ[] PROGMEM = "Nyni provedu z kalibraci.";
  2049. const char * const MSG_WIZARD_Z_CAL_LANG_TABLE[LANG_NUM] PROGMEM = {
  2050. MSG_WIZARD_Z_CAL_EN,
  2051. MSG_WIZARD_Z_CAL_CZ
  2052. };
  2053. const char MSG_XYZ_DETAILS_EN[] PROGMEM = "XYZ cal. details";
  2054. const char MSG_XYZ_DETAILS_CZ[] PROGMEM = "Detaily XYZ kal.";
  2055. const char * const MSG_XYZ_DETAILS_LANG_TABLE[LANG_NUM] PROGMEM = {
  2056. MSG_XYZ_DETAILS_EN,
  2057. MSG_XYZ_DETAILS_CZ
  2058. };
  2059. const char MSG_X_MAX_EN[] PROGMEM = "x_max: ";
  2060. const char * const MSG_X_MAX_LANG_TABLE[1] PROGMEM = {
  2061. MSG_X_MAX_EN
  2062. };
  2063. const char MSG_X_MIN_EN[] PROGMEM = "x_min: ";
  2064. const char * const MSG_X_MIN_LANG_TABLE[1] PROGMEM = {
  2065. MSG_X_MIN_EN
  2066. };
  2067. const char MSG_YES_EN[] PROGMEM = "Yes";
  2068. const char MSG_YES_CZ[] PROGMEM = "Ano";
  2069. const char * const MSG_YES_LANG_TABLE[LANG_NUM] PROGMEM = {
  2070. MSG_YES_EN,
  2071. MSG_YES_CZ
  2072. };
  2073. const char MSG_Y_DISTANCE_FROM_MIN_EN[] PROGMEM = "Y distance from min:";
  2074. const char MSG_Y_DISTANCE_FROM_MIN_CZ[] PROGMEM = "Y vzdalenost od min:";
  2075. const char * const MSG_Y_DISTANCE_FROM_MIN_LANG_TABLE[LANG_NUM] PROGMEM = {
  2076. MSG_Y_DISTANCE_FROM_MIN_EN,
  2077. MSG_Y_DISTANCE_FROM_MIN_CZ
  2078. };
  2079. const char MSG_Y_MAX_EN[] PROGMEM = "y_max: ";
  2080. const char * const MSG_Y_MAX_LANG_TABLE[1] PROGMEM = {
  2081. MSG_Y_MAX_EN
  2082. };
  2083. const char MSG_Y_MIN_EN[] PROGMEM = "y_min: ";
  2084. const char * const MSG_Y_MIN_LANG_TABLE[1] PROGMEM = {
  2085. MSG_Y_MIN_EN
  2086. };
  2087. const char MSG_ZPROBE_OUT_EN[] PROGMEM = "Z probe out. bed";
  2088. const char * const MSG_ZPROBE_OUT_LANG_TABLE[1] PROGMEM = {
  2089. MSG_ZPROBE_OUT_EN
  2090. };
  2091. const char MSG_ZPROBE_ZOFFSET_EN[] PROGMEM = "Z Offset";
  2092. const char * const MSG_ZPROBE_ZOFFSET_LANG_TABLE[1] PROGMEM = {
  2093. MSG_ZPROBE_ZOFFSET_EN
  2094. };
  2095. const char MSG_Z_MAX_EN[] PROGMEM = "z_max: ";
  2096. const char * const MSG_Z_MAX_LANG_TABLE[1] PROGMEM = {
  2097. MSG_Z_MAX_EN
  2098. };
  2099. const char MSG_Z_MIN_EN[] PROGMEM = "z_min: ";
  2100. const char * const MSG_Z_MIN_LANG_TABLE[1] PROGMEM = {
  2101. MSG_Z_MIN_EN
  2102. };
  2103. const char WELCOME_MSG_EN[] PROGMEM = CUSTOM_MENDEL_NAME " ready.";
  2104. const char WELCOME_MSG_CZ[] PROGMEM = CUSTOM_MENDEL_NAME " ok";
  2105. const char * const WELCOME_MSG_LANG_TABLE[LANG_NUM] PROGMEM = {
  2106. WELCOME_MSG_EN,
  2107. WELCOME_MSG_CZ
  2108. };
  2109. char langbuffer[LCD_WIDTH+1];
  2110. char* CAT2(const char *s1,const char *s2) {
  2111. unsigned char len=0;
  2112. strncpy_P(langbuffer+len,s1,LCD_WIDTH-len);
  2113. len+=strlen_P(s1);
  2114. strncpy_P(langbuffer+len,s2,LCD_WIDTH-len);
  2115. return langbuffer;
  2116. }
  2117. char* CAT4(const char *s1,const char *s2,const char *s3,const char *s4) {
  2118. unsigned char len=0;
  2119. strncpy_P(langbuffer+len,s1,LCD_WIDTH-len);
  2120. len+=strlen_P(s1);
  2121. strncpy_P(langbuffer+len,s2,LCD_WIDTH-len);
  2122. len+=strlen_P(s2);
  2123. strncpy_P(langbuffer+len,s3,LCD_WIDTH-len);
  2124. len+=strlen_P(s3);
  2125. strncpy_P(langbuffer+len,s4,LCD_WIDTH-len);
  2126. return langbuffer;
  2127. }