| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109 |
- // These are the system messages, which shall always be in English.
- +define MSG_Enqueing "enqueing \""
- +define MSG_POWERUP "PowerUp"
- define MSG_EXTERNAL_RESET " External Reset"
- define MSG_BROWNOUT_RESET " Brown out Reset"
- define MSG_WATCHDOG_RESET " Watchdog Reset"
- define MSG_SOFTWARE_RESET " Software Reset"
- define MSG_AUTHOR " | Author: "
- +define MSG_CONFIGURATION_VER " Last Updated: "
- +define MSG_FREE_MEMORY " Free Memory: "
- +define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
- +define MSG_OK "ok"
- define MSG_FILE_SAVED "Done saving file."
- define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
- +define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
- +define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
- define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
- define MSG_FILE_PRINTED "Done printing file"
- +define MSG_BEGIN_FILE_LIST "Begin file list"
- +define MSG_END_FILE_LIST "End file list"
- +define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
- +define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
- +define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
- +define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
- +define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
- +define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
- +define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
- define MSG_COUNT_X " Count X: "
- +define MSG_ERR_KILLED "Printer halted. kill() called!"
- +define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
- +define MSG_RESEND "Resend: "
- define MSG_UNKNOWN_COMMAND "Unknown command: \""
- define MSG_ACTIVE_EXTRUDER "Active Extruder: "
- define MSG_INVALID_EXTRUDER "Invalid extruder"
- define MSG_X_MIN "x_min: "
- define MSG_X_MAX "x_max: "
- define MSG_Y_MIN "y_min: "
- define MSG_Y_MAX "y_max: "
- define MSG_Z_MIN "z_min: "
- define MSG_Z_MAX "z_max: "
- +define MSG_M119_REPORT "Reporting endstop status"
- +define MSG_ENDSTOP_HIT "TRIGGERED"
- +define MSG_ENDSTOP_OPEN "open"
- +define MSG_HOTEND_OFFSET "Hotend offsets:"
- +define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
- +define MSG_SD_INIT_FAIL "SD init fail"
- +define MSG_SD_VOL_INIT_FAIL "volume.init failed"
- +define MSG_SD_OPENROOT_FAIL "openRoot failed"
- +define MSG_SD_CARD_OK "SD card ok"
- +define MSG_SD_WORKDIR_FAIL "workDir open failed"
- +define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
- +define MSG_SD_FILE_OPENED "File opened: "
- define MSG_SD_SIZE " Size: "
- +define MSG_SD_FILE_SELECTED "File selected"
- +define MSG_SD_WRITE_TO_FILE "Writing to file: "
- +define MSG_SD_PRINTING_BYTE "SD printing byte "
- +define MSG_SD_NOT_PRINTING "Not SD printing"
- +define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
- +define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
- +define MSG_STEPPER_TOO_HIGH "Steprate too high: "
- +define MSG_ENDSTOPS_HIT "endstops hit: "
- +define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
- define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
- +define MSG_BABYSTEPPING_X "Babystepping X"
- +define MSG_BABYSTEPPING_Y "Babystepping Y"
- +define MSG_BABYSTEPPING_Z "Adjusting Z"
- +define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
- +define MSG_SET_HOME_OFFSETS "Set home offsets"
- +define MSG_SET_ORIGIN "Set origin"
- define MSG_ON "On "
- define MSG_OFF "Off"
- +define MSG_VMIN "Vmin"
- +define MSG_VTRAV_MIN "VTrav min"
- +define MSG_AMAX "Amax "
- +define MSG_A_RETRACT "A-retract"
- +define MSG_MOVE_01MM "Move 0.1mm"
- +define MSG_MOVE_1MM "Move 1mm"
- +define MSG_MOVE_10MM "Move 10mm"
- +define MSG_NOZZLE1 "Nozzle2"
- +define MSG_NOZZLE2 "Nozzle3"
- +define MSG_FLOW0 "Flow 0"
- +define MSG_FLOW1 "Flow 1"
- +define MSG_FLOW2 "Flow 2"
- +define MSG_CONTROL "Control"
- +define MSG_MIN " \002 Min"
- +define MSG_MAX " \002 Max"
- +define MSG_FACTOR " \002 Fact"
- +define MSG_MOTION "Motion"
- +define MSG_VOLUMETRIC "Filament"
- +define MSG_VOLUMETRIC_ENABLED "E in mm3"
- +define MSG_STORE_EPROM "Store memory"
- +define MSG_LOAD_EPROM "Load memory"
- +define MSG_RESTORE_FAILSAFE "Restore failsafe"
- +define MSG_REFRESH "\xF8" "Refresh"
- +define MSG_INIT_SDCARD "Init. SD card"
- +define MSG_CNG_SDCARD "Change SD card"
- define MSG_ZPROBE_OUT "Z probe out. bed"
- define MSG_POSITION_UNKNOWN "Home X/Y before Z"
- define MSG_ZPROBE_ZOFFSET "Z Offset"
- +define MSG_BABYSTEP_X "Babystep X"
- +define MSG_BABYSTEP_Y "Babystep Y"
- +define MSG_RECTRACT "Rectract"
|
