ultralcd.cpp 266 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184218521862187218821892190219121922193219421952196219721982199220022012202220322042205220622072208220922102211221222132214221522162217221822192220222122222223222422252226222722282229223022312232223322342235223622372238223922402241224222432244224522462247224822492250225122522253225422552256225722582259226022612262226322642265226622672268226922702271227222732274227522762277227822792280228122822283228422852286228722882289229022912292229322942295229622972298229923002301230223032304230523062307230823092310231123122313231423152316231723182319232023212322232323242325232623272328232923302331233223332334233523362337233823392340234123422343234423452346234723482349235023512352235323542355235623572358235923602361236223632364236523662367236823692370237123722373237423752376237723782379238023812382238323842385238623872388238923902391239223932394239523962397239823992400240124022403240424052406240724082409241024112412241324142415241624172418241924202421242224232424242524262427242824292430243124322433243424352436243724382439244024412442244324442445244624472448244924502451245224532454245524562457245824592460246124622463246424652466246724682469247024712472247324742475247624772478247924802481248224832484248524862487248824892490249124922493249424952496249724982499250025012502250325042505250625072508250925102511251225132514251525162517251825192520252125222523252425252526252725282529253025312532253325342535253625372538253925402541254225432544254525462547254825492550255125522553255425552556255725582559256025612562256325642565256625672568256925702571257225732574257525762577257825792580258125822583258425852586258725882589259025912592259325942595259625972598259926002601260226032604260526062607260826092610261126122613261426152616261726182619262026212622262326242625262626272628262926302631263226332634263526362637263826392640264126422643264426452646264726482649265026512652265326542655265626572658265926602661266226632664266526662667266826692670267126722673267426752676267726782679268026812682268326842685268626872688268926902691269226932694269526962697269826992700270127022703270427052706270727082709271027112712271327142715271627172718271927202721272227232724272527262727272827292730273127322733273427352736273727382739274027412742274327442745274627472748274927502751275227532754275527562757275827592760276127622763276427652766276727682769277027712772277327742775277627772778277927802781278227832784278527862787278827892790279127922793279427952796279727982799280028012802280328042805280628072808280928102811281228132814281528162817281828192820282128222823282428252826282728282829283028312832283328342835283628372838283928402841284228432844284528462847284828492850285128522853285428552856285728582859286028612862286328642865286628672868286928702871287228732874287528762877287828792880288128822883288428852886288728882889289028912892289328942895289628972898289929002901290229032904290529062907290829092910291129122913291429152916291729182919292029212922292329242925292629272928292929302931293229332934293529362937293829392940294129422943294429452946294729482949295029512952295329542955295629572958295929602961296229632964296529662967296829692970297129722973297429752976297729782979298029812982298329842985298629872988298929902991299229932994299529962997299829993000300130023003300430053006300730083009301030113012301330143015301630173018301930203021302230233024302530263027302830293030303130323033303430353036303730383039304030413042304330443045304630473048304930503051305230533054305530563057305830593060306130623063306430653066306730683069307030713072307330743075307630773078307930803081308230833084308530863087308830893090309130923093309430953096309730983099310031013102310331043105310631073108310931103111311231133114311531163117311831193120312131223123312431253126312731283129313031313132313331343135313631373138313931403141314231433144314531463147314831493150315131523153315431553156315731583159316031613162316331643165316631673168316931703171317231733174317531763177317831793180318131823183318431853186318731883189319031913192319331943195319631973198319932003201320232033204320532063207320832093210321132123213321432153216321732183219322032213222322332243225322632273228322932303231323232333234323532363237323832393240324132423243324432453246324732483249325032513252325332543255325632573258325932603261326232633264326532663267326832693270327132723273327432753276327732783279328032813282328332843285328632873288328932903291329232933294329532963297329832993300330133023303330433053306330733083309331033113312331333143315331633173318331933203321332233233324332533263327332833293330333133323333333433353336333733383339334033413342334333443345334633473348334933503351335233533354335533563357335833593360336133623363336433653366336733683369337033713372337333743375337633773378337933803381338233833384338533863387338833893390339133923393339433953396339733983399340034013402340334043405340634073408340934103411341234133414341534163417341834193420342134223423342434253426342734283429343034313432343334343435343634373438343934403441344234433444344534463447344834493450345134523453345434553456345734583459346034613462346334643465346634673468346934703471347234733474347534763477347834793480348134823483348434853486348734883489349034913492349334943495349634973498349935003501350235033504350535063507350835093510351135123513351435153516351735183519352035213522352335243525352635273528352935303531353235333534353535363537353835393540354135423543354435453546354735483549355035513552355335543555355635573558355935603561356235633564356535663567356835693570357135723573357435753576357735783579358035813582358335843585358635873588358935903591359235933594359535963597359835993600360136023603360436053606360736083609361036113612361336143615361636173618361936203621362236233624362536263627362836293630363136323633363436353636363736383639364036413642364336443645364636473648364936503651365236533654365536563657365836593660366136623663366436653666366736683669367036713672367336743675367636773678367936803681368236833684368536863687368836893690369136923693369436953696369736983699370037013702370337043705370637073708370937103711371237133714371537163717371837193720372137223723372437253726372737283729373037313732373337343735373637373738373937403741374237433744374537463747374837493750375137523753375437553756375737583759376037613762376337643765376637673768376937703771377237733774377537763777377837793780378137823783378437853786378737883789379037913792379337943795379637973798379938003801380238033804380538063807380838093810381138123813381438153816381738183819382038213822382338243825382638273828382938303831383238333834383538363837383838393840384138423843384438453846384738483849385038513852385338543855385638573858385938603861386238633864386538663867386838693870387138723873387438753876387738783879388038813882388338843885388638873888388938903891389238933894389538963897389838993900390139023903390439053906390739083909391039113912391339143915391639173918391939203921392239233924392539263927392839293930393139323933393439353936393739383939394039413942394339443945394639473948394939503951395239533954395539563957395839593960396139623963396439653966396739683969397039713972397339743975397639773978397939803981398239833984398539863987398839893990399139923993399439953996399739983999400040014002400340044005400640074008400940104011401240134014401540164017401840194020402140224023402440254026402740284029403040314032403340344035403640374038403940404041404240434044404540464047404840494050405140524053405440554056405740584059406040614062406340644065406640674068406940704071407240734074407540764077407840794080408140824083408440854086408740884089409040914092409340944095409640974098409941004101410241034104410541064107410841094110411141124113411441154116411741184119412041214122412341244125412641274128412941304131413241334134413541364137413841394140414141424143414441454146414741484149415041514152415341544155415641574158415941604161416241634164416541664167416841694170417141724173417441754176417741784179418041814182418341844185418641874188418941904191419241934194419541964197419841994200420142024203420442054206420742084209421042114212421342144215421642174218421942204221422242234224422542264227422842294230423142324233423442354236423742384239424042414242424342444245424642474248424942504251425242534254425542564257425842594260426142624263426442654266426742684269427042714272427342744275427642774278427942804281428242834284428542864287428842894290429142924293429442954296429742984299430043014302430343044305430643074308430943104311431243134314431543164317431843194320432143224323432443254326432743284329433043314332433343344335433643374338433943404341434243434344434543464347434843494350435143524353435443554356435743584359436043614362436343644365436643674368436943704371437243734374437543764377437843794380438143824383438443854386438743884389439043914392439343944395439643974398439944004401440244034404440544064407440844094410441144124413441444154416441744184419442044214422442344244425442644274428442944304431443244334434443544364437443844394440444144424443444444454446444744484449445044514452445344544455445644574458445944604461446244634464446544664467446844694470447144724473447444754476447744784479448044814482448344844485448644874488448944904491449244934494449544964497449844994500450145024503450445054506450745084509451045114512451345144515451645174518451945204521452245234524452545264527452845294530453145324533453445354536453745384539454045414542454345444545454645474548454945504551455245534554455545564557455845594560456145624563456445654566456745684569457045714572457345744575457645774578457945804581458245834584458545864587458845894590459145924593459445954596459745984599460046014602460346044605460646074608460946104611461246134614461546164617461846194620462146224623462446254626462746284629463046314632463346344635463646374638463946404641464246434644464546464647464846494650465146524653465446554656465746584659466046614662466346644665466646674668466946704671467246734674467546764677467846794680468146824683468446854686468746884689469046914692469346944695469646974698469947004701470247034704470547064707470847094710471147124713471447154716471747184719472047214722472347244725472647274728472947304731473247334734473547364737473847394740474147424743474447454746474747484749475047514752475347544755475647574758475947604761476247634764476547664767476847694770477147724773477447754776477747784779478047814782478347844785478647874788478947904791479247934794479547964797479847994800480148024803480448054806480748084809481048114812481348144815481648174818481948204821482248234824482548264827482848294830483148324833483448354836483748384839484048414842484348444845484648474848484948504851485248534854485548564857485848594860486148624863486448654866486748684869487048714872487348744875487648774878487948804881488248834884488548864887488848894890489148924893489448954896489748984899490049014902490349044905490649074908490949104911491249134914491549164917491849194920492149224923492449254926492749284929493049314932493349344935493649374938493949404941494249434944494549464947494849494950495149524953495449554956495749584959496049614962496349644965496649674968496949704971497249734974497549764977497849794980498149824983498449854986498749884989499049914992499349944995499649974998499950005001500250035004500550065007500850095010501150125013501450155016501750185019502050215022502350245025502650275028502950305031503250335034503550365037503850395040504150425043504450455046504750485049505050515052505350545055505650575058505950605061506250635064506550665067506850695070507150725073507450755076507750785079508050815082508350845085508650875088508950905091509250935094509550965097509850995100510151025103510451055106510751085109511051115112511351145115511651175118511951205121512251235124512551265127512851295130513151325133513451355136513751385139514051415142514351445145514651475148514951505151515251535154515551565157515851595160516151625163516451655166516751685169517051715172517351745175517651775178517951805181518251835184518551865187518851895190519151925193519451955196519751985199520052015202520352045205520652075208520952105211521252135214521552165217521852195220522152225223522452255226522752285229523052315232523352345235523652375238523952405241524252435244524552465247524852495250525152525253525452555256525752585259526052615262526352645265526652675268526952705271527252735274527552765277527852795280528152825283528452855286528752885289529052915292529352945295529652975298529953005301530253035304530553065307530853095310531153125313531453155316531753185319532053215322532353245325532653275328532953305331533253335334533553365337533853395340534153425343534453455346534753485349535053515352535353545355535653575358535953605361536253635364536553665367536853695370537153725373537453755376537753785379538053815382538353845385538653875388538953905391539253935394539553965397539853995400540154025403540454055406540754085409541054115412541354145415541654175418541954205421542254235424542554265427542854295430543154325433543454355436543754385439544054415442544354445445544654475448544954505451545254535454545554565457545854595460546154625463546454655466546754685469547054715472547354745475547654775478547954805481548254835484548554865487548854895490549154925493549454955496549754985499550055015502550355045505550655075508550955105511551255135514551555165517551855195520552155225523552455255526552755285529553055315532553355345535553655375538553955405541554255435544554555465547554855495550555155525553555455555556555755585559556055615562556355645565556655675568556955705571557255735574557555765577557855795580558155825583558455855586558755885589559055915592559355945595559655975598559956005601560256035604560556065607560856095610561156125613561456155616561756185619562056215622562356245625562656275628562956305631563256335634563556365637563856395640564156425643564456455646564756485649565056515652565356545655565656575658565956605661566256635664566556665667566856695670567156725673567456755676567756785679568056815682568356845685568656875688568956905691569256935694569556965697569856995700570157025703570457055706570757085709571057115712571357145715571657175718571957205721572257235724572557265727572857295730573157325733573457355736573757385739574057415742574357445745574657475748574957505751575257535754575557565757575857595760576157625763576457655766576757685769577057715772577357745775577657775778577957805781578257835784578557865787578857895790579157925793579457955796579757985799580058015802580358045805580658075808580958105811581258135814581558165817581858195820582158225823582458255826582758285829583058315832583358345835583658375838583958405841584258435844584558465847584858495850585158525853585458555856585758585859586058615862586358645865586658675868586958705871587258735874587558765877587858795880588158825883588458855886588758885889589058915892589358945895589658975898589959005901590259035904590559065907590859095910591159125913591459155916591759185919592059215922592359245925592659275928592959305931593259335934593559365937593859395940594159425943594459455946594759485949595059515952595359545955595659575958595959605961596259635964596559665967596859695970597159725973597459755976597759785979598059815982598359845985598659875988598959905991599259935994599559965997599859996000600160026003600460056006600760086009601060116012601360146015601660176018601960206021602260236024602560266027602860296030603160326033603460356036603760386039604060416042604360446045604660476048604960506051605260536054605560566057605860596060606160626063606460656066606760686069607060716072607360746075607660776078607960806081608260836084608560866087608860896090609160926093609460956096609760986099610061016102610361046105610661076108610961106111611261136114611561166117611861196120612161226123612461256126612761286129613061316132613361346135613661376138613961406141614261436144614561466147614861496150615161526153615461556156615761586159616061616162616361646165616661676168616961706171617261736174617561766177617861796180618161826183618461856186618761886189619061916192619361946195619661976198619962006201620262036204620562066207620862096210621162126213621462156216621762186219622062216222622362246225622662276228622962306231623262336234623562366237623862396240624162426243624462456246624762486249625062516252625362546255625662576258625962606261626262636264626562666267626862696270627162726273627462756276627762786279628062816282628362846285628662876288628962906291629262936294629562966297629862996300630163026303630463056306630763086309631063116312631363146315631663176318631963206321632263236324632563266327632863296330633163326333633463356336633763386339634063416342634363446345634663476348634963506351635263536354635563566357635863596360636163626363636463656366636763686369637063716372637363746375637663776378637963806381638263836384638563866387638863896390639163926393639463956396639763986399640064016402640364046405640664076408640964106411641264136414641564166417641864196420642164226423642464256426642764286429643064316432643364346435643664376438643964406441644264436444644564466447644864496450645164526453645464556456645764586459646064616462646364646465646664676468646964706471647264736474647564766477647864796480648164826483648464856486648764886489649064916492649364946495649664976498649965006501650265036504650565066507650865096510651165126513651465156516651765186519652065216522652365246525652665276528652965306531653265336534653565366537653865396540654165426543654465456546654765486549655065516552655365546555655665576558655965606561656265636564656565666567656865696570657165726573657465756576657765786579658065816582658365846585658665876588658965906591659265936594659565966597659865996600660166026603660466056606660766086609661066116612661366146615661666176618661966206621662266236624662566266627662866296630663166326633663466356636663766386639664066416642664366446645664666476648664966506651665266536654665566566657665866596660666166626663666466656666666766686669667066716672667366746675667666776678667966806681668266836684668566866687668866896690669166926693669466956696669766986699670067016702670367046705670667076708670967106711671267136714671567166717671867196720672167226723672467256726672767286729673067316732673367346735673667376738673967406741674267436744674567466747674867496750675167526753675467556756675767586759676067616762676367646765676667676768676967706771677267736774677567766777677867796780678167826783678467856786678767886789679067916792679367946795679667976798679968006801680268036804680568066807680868096810681168126813681468156816681768186819682068216822682368246825682668276828682968306831683268336834683568366837683868396840684168426843684468456846684768486849685068516852685368546855685668576858685968606861686268636864686568666867686868696870687168726873687468756876687768786879688068816882688368846885688668876888688968906891689268936894689568966897689868996900690169026903690469056906690769086909691069116912691369146915691669176918691969206921692269236924692569266927692869296930693169326933693469356936693769386939694069416942694369446945694669476948694969506951695269536954695569566957695869596960696169626963696469656966696769686969697069716972697369746975697669776978697969806981698269836984698569866987698869896990699169926993699469956996699769986999700070017002700370047005700670077008700970107011701270137014701570167017701870197020702170227023702470257026702770287029703070317032703370347035703670377038703970407041704270437044704570467047704870497050705170527053705470557056705770587059706070617062706370647065706670677068706970707071707270737074707570767077707870797080708170827083708470857086708770887089709070917092709370947095709670977098709971007101710271037104710571067107710871097110711171127113711471157116711771187119712071217122712371247125712671277128712971307131713271337134713571367137713871397140714171427143714471457146714771487149715071517152715371547155715671577158715971607161716271637164716571667167716871697170717171727173717471757176717771787179718071817182718371847185718671877188718971907191719271937194719571967197719871997200720172027203720472057206720772087209721072117212721372147215721672177218721972207221722272237224722572267227722872297230723172327233723472357236723772387239724072417242724372447245724672477248724972507251725272537254725572567257725872597260726172627263726472657266726772687269727072717272727372747275727672777278727972807281728272837284728572867287728872897290729172927293729472957296729772987299730073017302730373047305730673077308730973107311731273137314731573167317731873197320732173227323732473257326732773287329733073317332733373347335733673377338733973407341734273437344734573467347734873497350735173527353735473557356735773587359736073617362736373647365736673677368736973707371737273737374737573767377737873797380738173827383738473857386738773887389739073917392739373947395739673977398739974007401740274037404740574067407740874097410741174127413741474157416741774187419742074217422742374247425742674277428742974307431743274337434743574367437743874397440744174427443744474457446744774487449745074517452745374547455745674577458745974607461746274637464746574667467746874697470747174727473747474757476747774787479748074817482748374847485748674877488748974907491749274937494749574967497749874997500750175027503750475057506750775087509751075117512751375147515751675177518751975207521752275237524752575267527752875297530753175327533753475357536753775387539754075417542754375447545754675477548754975507551755275537554755575567557755875597560756175627563756475657566756775687569757075717572757375747575757675777578757975807581758275837584758575867587758875897590759175927593759475957596759775987599760076017602760376047605760676077608760976107611761276137614761576167617761876197620762176227623762476257626762776287629763076317632763376347635763676377638763976407641764276437644764576467647764876497650765176527653765476557656765776587659766076617662766376647665766676677668766976707671767276737674767576767677767876797680768176827683768476857686768776887689769076917692769376947695769676977698769977007701770277037704770577067707770877097710771177127713771477157716771777187719772077217722772377247725772677277728772977307731773277337734773577367737773877397740774177427743774477457746774777487749775077517752775377547755775677577758775977607761776277637764776577667767776877697770777177727773777477757776777777787779778077817782778377847785778677877788778977907791779277937794779577967797779877997800780178027803780478057806780778087809781078117812781378147815781678177818781978207821782278237824782578267827782878297830783178327833783478357836783778387839784078417842784378447845784678477848784978507851785278537854785578567857785878597860786178627863786478657866786778687869787078717872787378747875787678777878787978807881788278837884788578867887788878897890789178927893789478957896789778987899790079017902790379047905790679077908790979107911791279137914791579167917791879197920792179227923792479257926792779287929793079317932793379347935793679377938793979407941794279437944794579467947794879497950795179527953795479557956795779587959796079617962796379647965796679677968796979707971797279737974797579767977797879797980798179827983798479857986798779887989799079917992799379947995799679977998799980008001800280038004800580068007800880098010801180128013801480158016801780188019802080218022802380248025802680278028802980308031803280338034803580368037803880398040804180428043804480458046804780488049805080518052805380548055805680578058805980608061806280638064806580668067806880698070807180728073807480758076807780788079808080818082808380848085808680878088808980908091809280938094809580968097809880998100810181028103810481058106810781088109811081118112811381148115811681178118811981208121812281238124812581268127812881298130813181328133813481358136813781388139814081418142814381448145814681478148814981508151815281538154815581568157815881598160816181628163816481658166816781688169817081718172817381748175817681778178817981808181818281838184818581868187818881898190819181928193819481958196819781988199820082018202820382048205820682078208820982108211821282138214821582168217821882198220822182228223822482258226822782288229823082318232823382348235823682378238823982408241824282438244824582468247824882498250825182528253825482558256825782588259826082618262826382648265826682678268826982708271827282738274827582768277827882798280828182828283828482858286828782888289829082918292829382948295829682978298829983008301830283038304830583068307830883098310831183128313831483158316831783188319832083218322832383248325832683278328832983308331833283338334833583368337833883398340834183428343834483458346834783488349835083518352835383548355835683578358835983608361836283638364836583668367836883698370837183728373837483758376837783788379838083818382838383848385838683878388838983908391839283938394839583968397839883998400840184028403840484058406840784088409841084118412841384148415841684178418841984208421842284238424842584268427842884298430843184328433843484358436843784388439844084418442844384448445844684478448844984508451845284538454845584568457845884598460846184628463846484658466846784688469847084718472847384748475847684778478847984808481848284838484848584868487848884898490849184928493849484958496849784988499850085018502850385048505850685078508850985108511851285138514851585168517851885198520852185228523852485258526852785288529853085318532853385348535853685378538853985408541854285438544854585468547854885498550855185528553855485558556855785588559856085618562856385648565856685678568856985708571857285738574857585768577857885798580858185828583858485858586858785888589859085918592859385948595859685978598859986008601860286038604860586068607860886098610861186128613861486158616861786188619862086218622862386248625862686278628862986308631863286338634863586368637863886398640864186428643864486458646864786488649865086518652865386548655865686578658865986608661866286638664866586668667866886698670867186728673867486758676867786788679868086818682868386848685868686878688868986908691869286938694869586968697869886998700870187028703870487058706870787088709871087118712871387148715871687178718871987208721872287238724872587268727872887298730873187328733873487358736873787388739874087418742874387448745874687478748874987508751875287538754875587568757875887598760876187628763876487658766876787688769877087718772877387748775877687778778877987808781878287838784878587868787878887898790879187928793879487958796879787988799880088018802880388048805880688078808880988108811881288138814881588168817881888198820882188228823882488258826882788288829883088318832883388348835883688378838883988408841884288438844884588468847884888498850885188528853885488558856885788588859886088618862886388648865886688678868886988708871887288738874887588768877887888798880888188828883888488858886888788888889889088918892889388948895889688978898889989008901890289038904890589068907890889098910891189128913891489158916891789188919892089218922892389248925892689278928892989308931893289338934893589368937893889398940894189428943894489458946894789488949895089518952895389548955895689578958895989608961896289638964896589668967896889698970897189728973897489758976897789788979898089818982898389848985898689878988898989908991899289938994899589968997899889999000900190029003900490059006900790089009901090119012901390149015901690179018901990209021902290239024902590269027902890299030903190329033903490359036903790389039904090419042904390449045904690479048904990509051905290539054905590569057905890599060906190629063906490659066906790689069907090719072907390749075907690779078907990809081908290839084908590869087908890899090909190929093909490959096909790989099910091019102910391049105910691079108910991109111911291139114911591169117911891199120912191229123912491259126912791289129913091319132913391349135913691379138913991409141914291439144914591469147914891499150915191529153915491559156915791589159916091619162916391649165916691679168916991709171917291739174917591769177917891799180918191829183918491859186918791889189919091919192919391949195919691979198919992009201920292039204920592069207920892099210921192129213921492159216921792189219922092219222922392249225922692279228922992309231923292339234923592369237
  1. //! @file
  2. //! @date Aug 28, 2019
  3. //! @author mkbel
  4. //! @brief LCD
  5. #include "temperature.h"
  6. #include "ultralcd.h"
  7. #include "fsensor.h"
  8. #include "Marlin.h"
  9. #include "language.h"
  10. #include "cardreader.h"
  11. #include "temperature.h"
  12. #include "stepper.h"
  13. #include "ConfigurationStore.h"
  14. #include "printers.h"
  15. #include <string.h>
  16. #include "lcd.h"
  17. #include "menu.h"
  18. #include "backlight.h"
  19. #include "util.h"
  20. #include "mesh_bed_leveling.h"
  21. #include "mesh_bed_calibration.h"
  22. //#include "Configuration.h"
  23. #include "cmdqueue.h"
  24. #include "SdFatUtil.h"
  25. #ifdef FILAMENT_SENSOR
  26. #include "pat9125.h"
  27. #include "fsensor.h"
  28. #endif //FILAMENT_SENSOR
  29. #ifdef TMC2130
  30. #include "tmc2130.h"
  31. #endif //TMC2130
  32. #include "sound.h"
  33. #include "mmu.h"
  34. #include "static_assert.h"
  35. #include "first_lay_cal.h"
  36. #include "fsensor.h"
  37. #include "adc.h"
  38. #include "config.h"
  39. #ifndef LA_NOCOMPAT
  40. #include "la10compat.h"
  41. #endif
  42. int scrollstuff = 0;
  43. char longFilenameOLD[LONG_FILENAME_LENGTH];
  44. static void lcd_sd_updir();
  45. static void lcd_mesh_bed_leveling_settings();
  46. static void lcd_backlight_menu();
  47. int8_t ReInitLCD = 0;
  48. int8_t SilentModeMenu = SILENT_MODE_OFF;
  49. uint8_t SilentModeMenu_MMU = 1; //activate mmu unit stealth mode
  50. int8_t FSensorStateMenu = 1;
  51. #ifdef IR_SENSOR_ANALOG
  52. bool bMenuFSDetect=false;
  53. #endif //IR_SENSOR_ANALOG
  54. #ifdef SDCARD_SORT_ALPHA
  55. bool presort_flag = false;
  56. #endif
  57. LcdCommands lcd_commands_type = LcdCommands::Idle;
  58. static uint8_t lcd_commands_step = 0;
  59. CustomMsg custom_message_type = CustomMsg::Status;
  60. unsigned int custom_message_state = 0;
  61. bool isPrintPaused = false;
  62. uint8_t farm_mode = 0;
  63. int farm_no = 0;
  64. int farm_timer = 8;
  65. uint8_t farm_status = 0;
  66. bool printer_connected = true;
  67. unsigned long display_time; //just timer for showing pid finished message on lcd;
  68. float pid_temp = DEFAULT_PID_TEMP;
  69. static bool forceMenuExpire = false;
  70. static bool lcd_autoDeplete;
  71. static float manual_feedrate[] = MANUAL_FEEDRATE;
  72. /* !Configuration settings */
  73. uint8_t lcd_status_message_level;
  74. char lcd_status_message[LCD_WIDTH + 1] = ""; //////WELCOME!
  75. unsigned char firstrun = 1;
  76. static uint8_t lay1cal_filament = 0;
  77. static const char separator[] PROGMEM = "--------------------";
  78. /** forward declarations **/
  79. static const char* lcd_display_message_fullscreen_nonBlocking_P(const char *msg, uint8_t &nlines);
  80. // void copy_and_scalePID_i();
  81. // void copy_and_scalePID_d();
  82. /* Different menus */
  83. //static void lcd_status_screen(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
  84. #if (LANG_MODE != 0)
  85. static void lcd_language_menu();
  86. #endif
  87. static void lcd_main_menu();
  88. static void lcd_tune_menu();
  89. //static void lcd_move_menu();
  90. static void lcd_settings_menu();
  91. static void lcd_calibration_menu();
  92. static void lcd_control_temperature_menu();
  93. static void lcd_settings_linearity_correction_menu_save();
  94. static void prusa_stat_printerstatus(int _status);
  95. static void prusa_stat_farm_number();
  96. static void prusa_stat_diameter();
  97. static void prusa_stat_temperatures();
  98. static void prusa_stat_printinfo();
  99. static void lcd_farm_no();
  100. static void lcd_menu_xyz_y_min();
  101. static void lcd_menu_xyz_skew();
  102. static void lcd_menu_xyz_offset();
  103. static void lcd_menu_fails_stats_mmu();
  104. static void lcd_menu_fails_stats_mmu_print();
  105. static void lcd_menu_fails_stats_mmu_total();
  106. static void mmu_unload_filament();
  107. static void lcd_v2_calibration();
  108. //static void lcd_menu_show_sensors_state(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
  109. static void mmu_fil_eject_menu();
  110. static void mmu_load_to_nozzle_menu();
  111. static void preheat_or_continue();
  112. #ifdef MMU_HAS_CUTTER
  113. static void mmu_cut_filament_menu();
  114. #endif //MMU_HAS_CUTTER
  115. #if defined(TMC2130) || defined(FILAMENT_SENSOR)
  116. static void lcd_menu_fails_stats();
  117. #endif //TMC2130 or FILAMENT_SENSOR
  118. #ifdef TMC2130
  119. static void lcd_belttest_v();
  120. #endif //TMC2130
  121. static void lcd_selftest_v();
  122. #ifdef TMC2130
  123. static void reset_crash_det(unsigned char axis);
  124. static bool lcd_selfcheck_axis_sg(unsigned char axis);
  125. static bool lcd_selfcheck_axis(int _axis, int _travel);
  126. #else
  127. static bool lcd_selfcheck_axis(int _axis, int _travel);
  128. static bool lcd_selfcheck_pulleys(int axis);
  129. #endif //TMC2130
  130. static bool lcd_selfcheck_endstops();
  131. static bool lcd_selfcheck_check_heater(bool _isbed);
  132. enum class TestScreen : uint_least8_t
  133. {
  134. ExtruderFan,
  135. PrintFan,
  136. FansOk,
  137. EndStops,
  138. AxisX,
  139. AxisY,
  140. AxisZ,
  141. Bed,
  142. Hotend,
  143. HotendOk,
  144. Fsensor,
  145. FsensorOk,
  146. AllCorrect,
  147. Failed,
  148. Home,
  149. };
  150. enum class TestError : uint_least8_t
  151. {
  152. Heater,
  153. Bed,
  154. Endstops,
  155. Motor,
  156. Endstop,
  157. PrintFan,
  158. ExtruderFan,
  159. Pulley,
  160. Axis,
  161. SwappedFan,
  162. WiringFsensor,
  163. TriggeringFsensor,
  164. FsensorLevel
  165. };
  166. static int lcd_selftest_screen(TestScreen screen, int _progress, int _progress_scale, bool _clear, int _delay);
  167. static void lcd_selftest_screen_step(int _row, int _col, int _state, const char *_name, const char *_indicator);
  168. static bool lcd_selftest_manual_fan_check(int _fan, bool check_opposite,
  169. bool _default=false);
  170. #ifdef FANCHECK
  171. /** Enumerate for lcd_selftest_fan_auto function.
  172. */
  173. enum class FanCheck : uint_least8_t {
  174. Success,
  175. PrintFan,
  176. ExtruderFan,
  177. SwappedFan,
  178. };
  179. /**
  180. * Try to check fan working and wiring.
  181. *
  182. * @param _fan i fan number 0 means extruder fan, 1 means print fan.
  183. *
  184. * @returns a TestError noerror, extruderFan, printFan or swappedFan.
  185. */
  186. static FanCheck lcd_selftest_fan_auto(int _fan);
  187. #endif //FANCHECK
  188. #ifdef PAT9125
  189. static bool lcd_selftest_fsensor();
  190. #endif //PAT9125
  191. static bool selftest_irsensor();
  192. #ifdef IR_SENSOR_ANALOG
  193. static bool lcd_selftest_IRsensor(bool bStandalone=false);
  194. static void lcd_detect_IRsensor();
  195. #endif //IR_SENSOR_ANALOG
  196. static void lcd_selftest_error(TestError error, const char *_error_1, const char *_error_2);
  197. static void lcd_colorprint_change();
  198. #ifdef SNMM
  199. static int get_ext_nr();
  200. #endif //SNMM
  201. #if defined (SNMM) || defined(SNMM_V2)
  202. static void fil_load_menu();
  203. static void fil_unload_menu();
  204. #endif // SNMM || SNMM_V2
  205. static void lcd_disable_farm_mode();
  206. static void lcd_set_fan_check();
  207. static void lcd_cutter_enabled();
  208. #ifdef SNMM
  209. static char snmm_stop_print_menu();
  210. #endif //SNMM
  211. #ifdef SDCARD_SORT_ALPHA
  212. static void lcd_sort_type_set();
  213. #endif
  214. static void lcd_babystep_z();
  215. static void lcd_send_status();
  216. #ifdef FARM_CONNECT_MESSAGE
  217. static void lcd_connect_printer();
  218. #endif //FARM_CONNECT_MESSAGE
  219. //! Beware: has side effects - forces lcd_draw_update to 2, which means clear the display
  220. void lcd_finishstatus();
  221. static void lcd_sdcard_menu();
  222. static void lcd_sheet_menu();
  223. #ifdef DELTA_CALIBRATION_MENU
  224. static void lcd_delta_calibrate_menu();
  225. #endif // DELTA_CALIBRATION_MENU
  226. /* Different types of actions that can be used in menu items. */
  227. static void menu_action_sdfile(const char* filename);
  228. static void menu_action_sddirectory(const char* filename);
  229. #define ENCODER_FEEDRATE_DEADZONE 10
  230. #define STATE_NA 255
  231. #define STATE_OFF 0
  232. #define STATE_ON 1
  233. /*
  234. #define MENU_ITEM(type, label, args...) do { \
  235. if (menu_item == menu_line) { \
  236. if (lcd_draw_update) { \
  237. const char* _label_pstr = (label); \
  238. if (lcd_encoder == menu_item) { \
  239. lcd_implementation_drawmenu_ ## type ## _selected (menu_row, _label_pstr , ## args ); \
  240. }else{\
  241. lcd_implementation_drawmenu_ ## type (menu_row, _label_pstr , ## args ); \
  242. }\
  243. }\
  244. if (menu_clicked && (lcd_encoder == menu_item)) {\
  245. lcd_quick_feedback(); \
  246. menu_action_ ## type ( args ); \
  247. return;\
  248. }\
  249. }\
  250. menu_item++;\
  251. } while(0)
  252. */
  253. #if (SDCARDDETECT > 0)
  254. bool lcd_oldcardstatus;
  255. #endif
  256. uint8_t selected_sheet = 0;
  257. bool ignore_click = false;
  258. bool wait_for_unclick;
  259. // place-holders for Ki and Kd edits
  260. #ifdef PIDTEMP
  261. // float raw_Ki, raw_Kd;
  262. #endif
  263. bool bMain; // flag (i.e. 'fake parameter') for 'lcd_sdcard_menu()' function
  264. bool bSettings; // flag (i.e. 'fake parameter') for 'lcd_hw_setup_menu()' function
  265. const char STR_SEPARATOR[] PROGMEM = "------------";
  266. static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* filename, char* longFilename)
  267. {
  268. char c;
  269. int enc_dif = lcd_encoder_diff / ENCODER_PULSES_PER_STEP;
  270. uint8_t n = LCD_WIDTH - 1;
  271. for(uint_least8_t g = 0; g<4;g++){
  272. lcd_set_cursor(0, g);
  273. lcd_print(' ');
  274. }
  275. lcd_set_cursor(0, row);
  276. lcd_print('>');
  277. if (longFilename[0] == '\0')
  278. {
  279. longFilename = filename;
  280. }
  281. int i = 1;
  282. int j = 0;
  283. char* longFilenameTMP = longFilename;
  284. while((c = *longFilenameTMP) != '\0')
  285. {
  286. lcd_set_cursor(i, row);
  287. lcd_print(c);
  288. i++;
  289. longFilenameTMP++;
  290. if(i==LCD_WIDTH){
  291. i=1;
  292. j++;
  293. longFilenameTMP = longFilename + j;
  294. n = LCD_WIDTH - 1;
  295. for(int g = 0; g<300 ;g++){
  296. manage_heater();
  297. if(LCD_CLICKED || ( enc_dif != (lcd_encoder_diff / ENCODER_PULSES_PER_STEP))){
  298. longFilenameTMP = longFilename;
  299. *(longFilenameTMP + LCD_WIDTH - 2) = '\0';
  300. i = 1;
  301. j = 0;
  302. break;
  303. }else{
  304. if (j == 1) _delay_ms(3); //wait around 1.2 s to start scrolling text
  305. _delay_ms(1); //then scroll with redrawing every 300 ms
  306. }
  307. }
  308. }
  309. }
  310. if(c!='\0'){
  311. lcd_set_cursor(i, row);
  312. lcd_print(c);
  313. i++;
  314. }
  315. n=n-i+1;
  316. while(n--)
  317. lcd_print(' ');
  318. }
  319. static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* filename, char* longFilename)
  320. {
  321. char c;
  322. uint8_t n = LCD_WIDTH - 1;
  323. lcd_set_cursor(0, row);
  324. lcd_print(' ');
  325. if (longFilename[0] != '\0')
  326. {
  327. filename = longFilename;
  328. longFilename[LCD_WIDTH-1] = '\0';
  329. }
  330. while( ((c = *filename) != '\0') && (n>0) )
  331. {
  332. lcd_print(c);
  333. filename++;
  334. n--;
  335. }
  336. while(n--)
  337. lcd_print(' ');
  338. }
  339. static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* filename, char* longFilename)
  340. {
  341. char c;
  342. uint8_t n = LCD_WIDTH - 2;
  343. lcd_set_cursor(0, row);
  344. lcd_print('>');
  345. lcd_print(LCD_STR_FOLDER[0]);
  346. if (longFilename[0] != '\0')
  347. {
  348. filename = longFilename;
  349. longFilename[LCD_WIDTH-2] = '\0';
  350. }
  351. while( ((c = *filename) != '\0') && (n>0) )
  352. {
  353. lcd_print(c);
  354. filename++;
  355. n--;
  356. }
  357. while(n--)
  358. lcd_print(' ');
  359. }
  360. static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* filename, char* longFilename)
  361. {
  362. char c;
  363. uint8_t n = LCD_WIDTH - 2;
  364. lcd_set_cursor(0, row);
  365. lcd_print(' ');
  366. lcd_print(LCD_STR_FOLDER[0]);
  367. if (longFilename[0] != '\0')
  368. {
  369. filename = longFilename;
  370. longFilename[LCD_WIDTH-2] = '\0';
  371. }
  372. while( ((c = *filename) != '\0') && (n>0) )
  373. {
  374. lcd_print(c);
  375. filename++;
  376. n--;
  377. }
  378. while(n--)
  379. lcd_print(' ');
  380. }
  381. #define MENU_ITEM_SDDIR(str_fn, str_fnl) do { if (menu_item_sddir(str_fn, str_fnl)) return; } while (0)
  382. //#define MENU_ITEM_SDDIR(str, str_fn, str_fnl) MENU_ITEM(sddirectory, str, str_fn, str_fnl)
  383. //extern uint8_t menu_item_sddir(const char* str, const char* str_fn, char* str_fnl);
  384. #define MENU_ITEM_SDFILE(str, str_fn, str_fnl) do { if (menu_item_sdfile(str, str_fn, str_fnl)) return; } while (0)
  385. //#define MENU_ITEM_SDFILE(str, str_fn, str_fnl) MENU_ITEM(sdfile, str, str_fn, str_fnl)
  386. //extern uint8_t menu_item_sdfile(const char* str, const char* str_fn, char* str_fnl);
  387. uint8_t menu_item_sddir(const char* str_fn, char* str_fnl)
  388. {
  389. #ifdef NEW_SD_MENU
  390. // str_fnl[18] = 0;
  391. // printf_P(PSTR("menu dir %d '%s' '%s'\n"), menu_row, str_fn, str_fnl);
  392. if (menu_item == menu_line)
  393. {
  394. if (lcd_draw_update)
  395. {
  396. lcd_set_cursor(0, menu_row);
  397. int cnt = lcd_printf_P(PSTR("%c%c%-18s"), (lcd_encoder == menu_item)?'>':' ', LCD_STR_FOLDER[0], str_fnl[0]?str_fnl:str_fn);
  398. // int cnt = lcd_printf_P(PSTR("%c%c%-18s"), (lcd_encoder == menu_item)?'>':' ', LCD_STR_FOLDER[0], str_fn);
  399. }
  400. if (menu_clicked && (lcd_encoder == menu_item))
  401. {
  402. uint8_t depth = (uint8_t)card.getWorkDirDepth();
  403. strcpy(dir_names[depth], str_fn);
  404. // printf_P(PSTR("%s\n"), dir_names[depth]);
  405. card.chdir(str_fn);
  406. lcd_encoder = 0;
  407. return menu_item_ret();
  408. }
  409. }
  410. menu_item++;
  411. return 0;
  412. #else //NEW_SD_MENU
  413. if (menu_item == menu_line)
  414. {
  415. if (lcd_draw_update)
  416. {
  417. if (lcd_encoder == menu_item)
  418. lcd_implementation_drawmenu_sddirectory_selected(menu_row, str_fn, str_fnl);
  419. else
  420. lcd_implementation_drawmenu_sddirectory(menu_row, str_fn, str_fnl);
  421. }
  422. if (menu_clicked && (lcd_encoder == menu_item))
  423. {
  424. menu_clicked = false;
  425. lcd_update_enabled = 0;
  426. menu_action_sddirectory(str_fn);
  427. lcd_update_enabled = 1;
  428. return menu_item_ret();
  429. }
  430. }
  431. menu_item++;
  432. return 0;
  433. #endif //NEW_SD_MENU
  434. }
  435. static uint8_t menu_item_sdfile(const char*
  436. #ifdef NEW_SD_MENU
  437. str
  438. #endif //NEW_SD_MENU
  439. ,const char* str_fn, char* str_fnl)
  440. {
  441. #ifdef NEW_SD_MENU
  442. // printf_P(PSTR("menu sdfile\n"));
  443. // str_fnl[19] = 0;
  444. // printf_P(PSTR("menu file %d '%s' '%s'\n"), menu_row, str_fn, str_fnl);
  445. if (menu_item == menu_line)
  446. {
  447. if (lcd_draw_update)
  448. {
  449. // printf_P(PSTR("menu file %d %d '%s'\n"), menu_row, menuData.sdcard_menu.viewState, str_fnl[0]?str_fnl:str_fn);
  450. lcd_set_cursor(0, menu_row);
  451. /* if (lcd_encoder == menu_item)
  452. {
  453. lcd_printf_P(PSTR("%c%-19s"), (lcd_encoder == menu_item)?'>':' ', (str_fnl[0]?str_fnl:str_fn) + 1);
  454. if (menuData.sdcard_menu.viewState == 0)
  455. {
  456. menuData.sdcard_menu.viewState++;
  457. lcd_printf_P(PSTR("%c%-19s"), (lcd_encoder == menu_item)?'>':' ', (str_fnl[0]?str_fnl:str_fn) + 1);
  458. }
  459. else if (menuData.sdcard_menu.viewState == 1)
  460. {
  461. lcd_printf_P(PSTR("%c%-19s"), (lcd_encoder == menu_item)?'>':' ', (str_fnl[0]?str_fnl:str_fn) + 2);
  462. }
  463. }
  464. else*/
  465. {
  466. str_fnl[19] = 0;
  467. lcd_printf_P(PSTR("%c%-19s"), (lcd_encoder == menu_item)?'>':' ', str_fnl[0]?str_fnl:str_fn);
  468. }
  469. // int cnt = lcd_printf_P(PSTR("%c%-19s"), (lcd_encoder == menu_item)?'>':' ', str_fnl);
  470. // int cnt = lcd_printf_P(PSTR("%cTESTIK.gcode"), (lcd_encoder == menu_item)?'>':' ');
  471. }
  472. if (menu_clicked && (lcd_encoder == menu_item))
  473. {
  474. return menu_item_ret();
  475. }
  476. }
  477. menu_item++;
  478. return 0;
  479. #else //NEW_SD_MENU
  480. if (menu_item == menu_line)
  481. {
  482. if (lcd_draw_update)
  483. {
  484. if (lcd_encoder == menu_item)
  485. lcd_implementation_drawmenu_sdfile_selected(menu_row, str_fn, str_fnl);
  486. else
  487. lcd_implementation_drawmenu_sdfile(menu_row, str_fn, str_fnl);
  488. }
  489. if (menu_clicked && (lcd_encoder == menu_item))
  490. {
  491. lcd_consume_click();
  492. menu_action_sdfile(str_fn);
  493. return menu_item_ret();
  494. }
  495. }
  496. menu_item++;
  497. return 0;
  498. #endif //NEW_SD_MENU
  499. }
  500. // Print temperature (nozzle/bed) (9 chars total)
  501. void lcdui_print_temp(char type, int val_current, int val_target)
  502. {
  503. int chars = lcd_printf_P(_N("%c%3d/%d%c"), type, val_current, val_target, LCD_STR_DEGREE[0]);
  504. lcd_space(9 - chars);
  505. }
  506. // Print Z-coordinate (8 chars total)
  507. void lcdui_print_Z_coord(void)
  508. {
  509. if (custom_message_type == CustomMsg::MeshBedLeveling)
  510. lcd_puts_P(_N("Z --- "));
  511. else
  512. lcd_printf_P(_N("Z%6.2f%c"), current_position[Z_AXIS], axis_known_position[Z_AXIS]?' ':'?');
  513. }
  514. #ifdef PLANNER_DIAGNOSTICS
  515. // Print planner diagnostics (8 chars total)
  516. void lcdui_print_planner_diag(void)
  517. {
  518. lcd_set_cursor(LCD_WIDTH - 8-2, 1);
  519. lcd_print(LCD_STR_FEEDRATE[0]);
  520. lcd_print(itostr3(feedmultiply));
  521. lcd_puts_P(PSTR("% Q"));
  522. {
  523. uint8_t queue = planner_queue_min();
  524. if (queue < (BLOCK_BUFFER_SIZE >> 1))
  525. lcd_putc('!');
  526. else
  527. {
  528. lcd_putc((char)(queue / 10) + '0');
  529. queue %= 10;
  530. }
  531. lcd_putc((char)queue + '0');
  532. planner_queue_min_reset();
  533. }
  534. }
  535. #endif // PLANNER_DIAGNOSTICS
  536. // Print feedrate (8 chars total)
  537. void lcdui_print_feedrate(void)
  538. {
  539. int chars = lcd_printf_P(_N("%c%3d%%"), LCD_STR_FEEDRATE[0], feedmultiply);
  540. lcd_space(8 - chars);
  541. }
  542. // Print percent done in form "USB---%", " SD---%", " ---%" (7 chars total)
  543. void lcdui_print_percent_done(void)
  544. {
  545. const char* src = is_usb_printing?_N("USB"):(IS_SD_PRINTING?_N(" SD"):_N(" "));
  546. char per[4];
  547. bool num = IS_SD_PRINTING || (PRINTER_ACTIVE && (print_percent_done_normal != PRINT_PERCENT_DONE_INIT));
  548. if (!num || heating_status) // either not printing or heating
  549. {
  550. const int8_t sheetNR = eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet));
  551. const int8_t nextSheet = eeprom_next_initialized_sheet(sheetNR);
  552. if ((nextSheet >= 0) && (sheetNR != nextSheet))
  553. {
  554. char sheet[8];
  555. eeprom_read_block(sheet, EEPROM_Sheets_base->s[sheetNR].name, 7);
  556. sheet[7] = '\0';
  557. lcd_printf_P(PSTR("%-7s"),sheet);
  558. return; //do not also print the percentage
  559. }
  560. }
  561. sprintf_P(per, num?_N("%3hhd"):_N("---"), calc_percent_done());
  562. lcd_printf_P(_N("%3S%3s%%"), src, per);
  563. }
  564. // Print extruder status (5 chars total)
  565. void lcdui_print_extruder(void)
  566. {
  567. int chars = 0;
  568. if (mmu_extruder == tmp_extruder) {
  569. if (mmu_extruder == MMU_FILAMENT_UNKNOWN) chars = lcd_printf_P(_N(" F?"));
  570. else chars = lcd_printf_P(_N(" F%u"), mmu_extruder + 1);
  571. }
  572. else
  573. {
  574. if (mmu_extruder == MMU_FILAMENT_UNKNOWN) chars = lcd_printf_P(_N(" ?>%u"), tmp_extruder + 1);
  575. else chars = lcd_printf_P(_N(" %u>%u"), mmu_extruder + 1, tmp_extruder + 1);
  576. }
  577. lcd_space(5 - chars);
  578. }
  579. // Print farm number (5 chars total)
  580. void lcdui_print_farm(void)
  581. {
  582. int chars = lcd_printf_P(_N(" F0 "));
  583. // lcd_space(5 - chars);
  584. /*
  585. // Farm number display
  586. if (farm_mode)
  587. {
  588. lcd_set_cursor(6, 2);
  589. lcd_puts_P(PSTR(" F"));
  590. lcd_print(farm_no);
  591. lcd_puts_P(PSTR(" "));
  592. // Beat display
  593. lcd_set_cursor(LCD_WIDTH - 1, 0);
  594. if ( (_millis() - kicktime) < 60000 ) {
  595. lcd_puts_P(PSTR("L"));
  596. }else{
  597. lcd_puts_P(PSTR(" "));
  598. }
  599. }
  600. else {
  601. #ifdef SNMM
  602. lcd_puts_P(PSTR(" E"));
  603. lcd_print(get_ext_nr() + 1);
  604. #else
  605. lcd_set_cursor(LCD_WIDTH - 8 - 2, 2);
  606. lcd_puts_P(PSTR(" "));
  607. #endif
  608. }
  609. */
  610. }
  611. #ifdef CMD_DIAGNOSTICS
  612. // Print CMD queue diagnostic (8 chars total)
  613. void lcdui_print_cmd_diag(void)
  614. {
  615. lcd_set_cursor(LCD_WIDTH - 8 -1, 2);
  616. lcd_puts_P(PSTR(" C"));
  617. lcd_print(buflen); // number of commands in cmd buffer
  618. if (buflen < 9) lcd_puts_P(" ");
  619. }
  620. #endif //CMD_DIAGNOSTICS
  621. // Print time (8 chars total)
  622. void lcdui_print_time(void)
  623. {
  624. //if remaining print time estimation is available print it else print elapsed time
  625. uint16_t print_t = 0;
  626. if (print_time_remaining_normal != PRINT_TIME_REMAINING_INIT)
  627. print_t = print_time_remaining();
  628. else if(starttime != 0)
  629. print_t = _millis() / 60000 - starttime / 60000;
  630. int chars = 0;
  631. if ((PRINTER_ACTIVE) && ((print_time_remaining_normal != PRINT_TIME_REMAINING_INIT) || (starttime != 0)))
  632. {
  633. char suff = ' ';
  634. char suff_doubt = ' ';
  635. if (print_time_remaining_normal != PRINT_TIME_REMAINING_INIT)
  636. {
  637. suff = 'R';
  638. if (feedmultiply != 100)
  639. suff_doubt = '?';
  640. }
  641. if (print_t < 6000) //time<100h
  642. chars = lcd_printf_P(_N("%c%02u:%02u%c%c"), LCD_STR_CLOCK[0], print_t / 60, print_t % 60, suff, suff_doubt);
  643. else //time>=100h
  644. chars = lcd_printf_P(_N("%c%3uh %c%c"), LCD_STR_CLOCK[0], print_t / 60, suff, suff_doubt);
  645. }
  646. else
  647. chars = lcd_printf_P(_N("%c--:-- "), LCD_STR_CLOCK[0]);
  648. lcd_space(8 - chars);
  649. }
  650. //Print status line on status screen
  651. void lcdui_print_status_line(void)
  652. {
  653. if (IS_SD_PRINTING)
  654. {
  655. if (strcmp(longFilenameOLD, (card.longFilename[0] ? card.longFilename : card.filename)) != 0)
  656. {
  657. memset(longFilenameOLD, '\0', strlen(longFilenameOLD));
  658. sprintf_P(longFilenameOLD, PSTR("%s"), (card.longFilename[0] ? card.longFilename : card.filename));
  659. scrollstuff = 0;
  660. }
  661. }
  662. if (heating_status)
  663. { // If heating flag, show progress of heating
  664. heating_status_counter++;
  665. if (heating_status_counter > 13)
  666. {
  667. heating_status_counter = 0;
  668. }
  669. lcd_set_cursor(7, 3);
  670. lcd_puts_P(PSTR(" "));
  671. for (unsigned int dots = 0; dots < heating_status_counter; dots++)
  672. {
  673. lcd_set_cursor(7 + dots, 3);
  674. lcd_print('.');
  675. }
  676. switch (heating_status)
  677. {
  678. case 1:
  679. lcd_set_cursor(0, 3);
  680. lcd_puts_P(_T(MSG_HEATING));
  681. break;
  682. case 2:
  683. lcd_set_cursor(0, 3);
  684. lcd_puts_P(_T(MSG_HEATING_COMPLETE));
  685. heating_status = 0;
  686. heating_status_counter = 0;
  687. break;
  688. case 3:
  689. lcd_set_cursor(0, 3);
  690. lcd_puts_P(_T(MSG_BED_HEATING));
  691. break;
  692. case 4:
  693. lcd_set_cursor(0, 3);
  694. lcd_puts_P(_T(MSG_BED_DONE));
  695. heating_status = 0;
  696. heating_status_counter = 0;
  697. break;
  698. default:
  699. break;
  700. }
  701. }
  702. else if ((IS_SD_PRINTING) && (custom_message_type == CustomMsg::Status))
  703. { // If printing from SD, show what we are printing
  704. if(strlen(longFilenameOLD) > LCD_WIDTH)
  705. {
  706. int inters = 0;
  707. int gh = scrollstuff;
  708. while (((gh - scrollstuff) < LCD_WIDTH) && (inters == 0))
  709. {
  710. if (longFilenameOLD[gh] == '\0')
  711. {
  712. lcd_set_cursor(gh - scrollstuff, 3);
  713. lcd_print(longFilenameOLD[gh - 1]);
  714. scrollstuff = 0;
  715. gh = scrollstuff;
  716. inters = 1;
  717. }
  718. else
  719. {
  720. lcd_set_cursor(gh - scrollstuff, 3);
  721. lcd_print(longFilenameOLD[gh - 1]);
  722. gh++;
  723. }
  724. }
  725. scrollstuff++;
  726. }
  727. else
  728. {
  729. lcd_printf_P(PSTR("%-20s"), longFilenameOLD);
  730. }
  731. }
  732. else
  733. { // Otherwise check for other special events
  734. switch (custom_message_type)
  735. {
  736. case CustomMsg::Status: // Nothing special, print status message normally
  737. lcd_print(lcd_status_message);
  738. break;
  739. case CustomMsg::MeshBedLeveling: // If mesh bed leveling in progress, show the status
  740. if (custom_message_state > 10)
  741. {
  742. lcd_set_cursor(0, 3);
  743. lcd_puts_P(PSTR(" "));
  744. lcd_set_cursor(0, 3);
  745. lcd_puts_P(_T(MSG_CALIBRATE_Z_AUTO));
  746. lcd_puts_P(PSTR(" : "));
  747. lcd_print(custom_message_state-10);
  748. }
  749. else
  750. {
  751. if (custom_message_state == 3)
  752. {
  753. lcd_puts_P(_T(WELCOME_MSG));
  754. lcd_setstatuspgm(_T(WELCOME_MSG));
  755. custom_message_type = CustomMsg::Status;
  756. }
  757. if (custom_message_state > 3 && custom_message_state <= 10 )
  758. {
  759. lcd_set_cursor(0, 3);
  760. lcd_puts_P(PSTR(" "));
  761. lcd_set_cursor(0, 3);
  762. lcd_puts_P(_i("Calibration done"));////MSG_HOMEYZ_DONE
  763. custom_message_state--;
  764. }
  765. }
  766. break;
  767. case CustomMsg::FilamentLoading: // If loading filament, print status
  768. lcd_print(lcd_status_message);
  769. break;
  770. case CustomMsg::PidCal: // PID tuning in progress
  771. lcd_print(lcd_status_message);
  772. if (pid_cycle <= pid_number_of_cycles && custom_message_state > 0)
  773. {
  774. lcd_set_cursor(10, 3);
  775. lcd_print(itostr3(pid_cycle));
  776. lcd_print('/');
  777. lcd_print(itostr3left(pid_number_of_cycles));
  778. }
  779. break;
  780. case CustomMsg::TempCal: // PINDA temp calibration in progress
  781. {
  782. char statusLine[LCD_WIDTH + 1];
  783. sprintf_P(statusLine, PSTR("%-20S"), _T(MSG_TEMP_CALIBRATION));
  784. char progress[4];
  785. sprintf_P(progress, PSTR("%d/6"), custom_message_state);
  786. memcpy(statusLine + 12, progress, sizeof(progress) - 1);
  787. lcd_set_cursor(0, 3);
  788. lcd_print(statusLine);
  789. }
  790. break;
  791. case CustomMsg::TempCompPreheat: // temp compensation preheat
  792. lcd_set_cursor(0, 3);
  793. lcd_puts_P(_i("PINDA Heating"));////MSG_PINDA_PREHEAT c=20 r=1
  794. if (custom_message_state <= PINDA_HEAT_T)
  795. {
  796. lcd_puts_P(PSTR(": "));
  797. lcd_print(custom_message_state); //seconds
  798. lcd_print(' ');
  799. }
  800. break;
  801. }
  802. }
  803. // Fill the rest of line to have nice and clean output
  804. for(int fillspace = 0; fillspace < 20; fillspace++)
  805. if ((lcd_status_message[fillspace] <= 31 ))
  806. lcd_print(' ');
  807. }
  808. //! @brief Show Status Screen
  809. //!
  810. //! @code{.unparsed}
  811. //! |01234567890123456789|
  812. //! |N 000/000D Z000.0 |
  813. //! |B 000/000D F100% |
  814. //! |USB100% T0 t--:-- |
  815. //! |Status line.........|
  816. //! ----------------------
  817. //! N - nozzle temp symbol LCD_STR_THERMOMETER
  818. //! D - Degree sysmbol LCD_STR_DEGREE
  819. //! B - bed temp symbol LCD_STR_BEDTEMP
  820. //! F - feedrate symbol LCD_STR_FEEDRATE
  821. //! t - clock symbol LCD_STR_THERMOMETER
  822. //! @endcode
  823. void lcdui_print_status_screen(void)
  824. {
  825. lcd_set_cursor(0, 0); //line 0
  826. //Print the hotend temperature (9 chars total)
  827. lcdui_print_temp(LCD_STR_THERMOMETER[0], (int)(degHotend(0) + 0.5), (int)(degTargetHotend(0) + 0.5));
  828. lcd_space(3); //3 spaces
  829. //Print Z-coordinate (8 chars total)
  830. lcdui_print_Z_coord();
  831. lcd_set_cursor(0, 1); //line 1
  832. //Print the Bed temperature (9 chars total)
  833. lcdui_print_temp(LCD_STR_BEDTEMP[0], (int)(degBed() + 0.5), (int)(degTargetBed() + 0.5));
  834. lcd_space(3); //3 spaces
  835. #ifdef PLANNER_DIAGNOSTICS
  836. //Print planner diagnostics (8 chars)
  837. lcdui_print_planner_diag();
  838. #else // PLANNER_DIAGNOSTICS
  839. //Print Feedrate (8 chars)
  840. lcdui_print_feedrate();
  841. #endif // PLANNER_DIAGNOSTICS
  842. lcd_set_cursor(0, 2); //line 2
  843. //Print SD status (7 chars)
  844. lcdui_print_percent_done();
  845. if (mmu_enabled)
  846. //Print extruder status (5 chars)
  847. lcdui_print_extruder();
  848. else if (farm_mode)
  849. //Print farm number (5 chars)
  850. lcdui_print_farm();
  851. else
  852. lcd_space(5); //5 spaces
  853. #ifdef CMD_DIAGNOSTICS
  854. //Print cmd queue diagnostics (8chars)
  855. lcdui_print_cmd_diag();
  856. #else
  857. //Print time (8chars)
  858. lcdui_print_time();
  859. #endif //CMD_DIAGNOSTICS
  860. lcd_set_cursor(0, 3); //line 3
  861. #ifndef DEBUG_DISABLE_LCD_STATUS_LINE
  862. lcdui_print_status_line();
  863. #endif //DEBUG_DISABLE_LCD_STATUS_LINE
  864. }
  865. // Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent
  866. void lcd_status_screen() // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
  867. {
  868. if (firstrun == 1)
  869. {
  870. firstrun = 0;
  871. if(lcd_status_message_level == 0)
  872. {
  873. strncpy_P(lcd_status_message, _T(WELCOME_MSG), LCD_WIDTH);
  874. lcd_finishstatus();
  875. }
  876. if (eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME) == 255 && eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME + 1) == 255 && eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME + 2) == 255 && eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME + 3) == 255)
  877. {
  878. eeprom_update_dword((uint32_t *)EEPROM_TOTALTIME, 0);
  879. eeprom_update_dword((uint32_t *)EEPROM_FILAMENTUSED, 0);
  880. }
  881. }
  882. #ifdef ULTIPANEL_FEEDMULTIPLY
  883. // Dead zone at 100% feedrate
  884. if ((feedmultiply < 100 && (feedmultiply + int(lcd_encoder)) > 100) ||
  885. (feedmultiply > 100 && (feedmultiply + int(lcd_encoder)) < 100))
  886. {
  887. lcd_encoder = 0;
  888. feedmultiply = 100;
  889. }
  890. if (feedmultiply == 100 && int(lcd_encoder) > ENCODER_FEEDRATE_DEADZONE)
  891. {
  892. feedmultiply += int(lcd_encoder) - ENCODER_FEEDRATE_DEADZONE;
  893. lcd_encoder = 0;
  894. }
  895. else if (feedmultiply == 100 && int(lcd_encoder) < -ENCODER_FEEDRATE_DEADZONE)
  896. {
  897. feedmultiply += int(lcd_encoder) + ENCODER_FEEDRATE_DEADZONE;
  898. lcd_encoder = 0;
  899. }
  900. else if (feedmultiply != 100)
  901. {
  902. feedmultiply += int(lcd_encoder);
  903. lcd_encoder = 0;
  904. }
  905. #endif //ULTIPANEL_FEEDMULTIPLY
  906. if (feedmultiply < 10)
  907. feedmultiply = 10;
  908. else if (feedmultiply > 999)
  909. feedmultiply = 999;
  910. if (lcd_status_update_delay)
  911. lcd_status_update_delay--;
  912. else
  913. lcd_draw_update = 1;
  914. if (lcd_draw_update)
  915. {
  916. ReInitLCD++;
  917. if (ReInitLCD == 30)
  918. {
  919. lcd_refresh(); // to maybe revive the LCD if static electricity killed it.
  920. ReInitLCD = 0 ;
  921. }
  922. else
  923. {
  924. if ((ReInitLCD % 10) == 0)
  925. lcd_refresh_noclear(); //to maybe revive the LCD if static electricity killed it.
  926. }
  927. lcdui_print_status_screen();
  928. if (farm_mode)
  929. {
  930. farm_timer--;
  931. if (farm_timer < 1)
  932. {
  933. farm_timer = 10;
  934. prusa_statistics(0);
  935. }
  936. switch (farm_timer)
  937. {
  938. case 8:
  939. prusa_statistics(21);
  940. if(loading_flag)
  941. prusa_statistics(22);
  942. break;
  943. case 5:
  944. if (IS_SD_PRINTING)
  945. prusa_statistics(20);
  946. break;
  947. }
  948. } // end of farm_mode
  949. lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */
  950. if (lcd_commands_type != LcdCommands::Idle)
  951. lcd_commands();
  952. } // end of lcd_draw_update
  953. bool current_click = LCD_CLICKED;
  954. if (ignore_click)
  955. {
  956. if (wait_for_unclick)
  957. {
  958. if (!current_click)
  959. ignore_click = wait_for_unclick = false;
  960. else
  961. current_click = false;
  962. }
  963. else if (current_click)
  964. {
  965. lcd_quick_feedback();
  966. wait_for_unclick = true;
  967. current_click = false;
  968. }
  969. }
  970. if (current_click
  971. && ( menu_block_entering_on_serious_errors == SERIOUS_ERR_NONE ) // or a serious error blocks entering the menu
  972. )
  973. {
  974. menu_depth = 0; //redundant, as already done in lcd_return_to_status(), just to be sure
  975. menu_submenu(lcd_main_menu);
  976. lcd_refresh(); // to maybe revive the LCD if static electricity killed it.
  977. }
  978. }
  979. void lcd_commands()
  980. {
  981. if (lcd_commands_type == LcdCommands::LongPause)
  982. {
  983. if (!blocks_queued() && !homing_flag)
  984. {
  985. lcd_setstatuspgm(_i("Print paused"));////MSG_PRINT_PAUSED c=20 r=1
  986. lcd_commands_type = LcdCommands::Idle;
  987. lcd_commands_step = 0;
  988. long_pause();
  989. }
  990. }
  991. #ifdef SNMM
  992. if (lcd_commands_type == LcdCommands::Layer1Cal)
  993. {
  994. char cmd1[30];
  995. float width = 0.4;
  996. float length = 20 - width;
  997. float extr = count_e(0.2, width, length);
  998. float extr_short_segment = count_e(0.2, width, width);
  999. if (lcd_commands_step>1) lcd_timeoutToStatus.start(); //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen
  1000. if (lcd_commands_step == 0)
  1001. {
  1002. lcd_commands_step = 10;
  1003. }
  1004. if (lcd_commands_step == 10 && !blocks_queued() && cmd_buffer_empty())
  1005. {
  1006. enquecommand_P(PSTR("M107"));
  1007. enquecommand_P(PSTR("M104 S" STRINGIFY(PLA_PREHEAT_HOTEND_TEMP)));
  1008. enquecommand_P(PSTR("M140 S" STRINGIFY(PLA_PREHEAT_HPB_TEMP)));
  1009. enquecommand_P(PSTR("M190 S" STRINGIFY(PLA_PREHEAT_HPB_TEMP)));
  1010. enquecommand_P(PSTR("M109 S" STRINGIFY(PLA_PREHEAT_HOTEND_TEMP)));
  1011. enquecommand_P(PSTR("T0"));
  1012. enquecommand_P(_T(MSG_M117_V2_CALIBRATION));
  1013. enquecommand_P(PSTR("G87")); //sets calibration status
  1014. enquecommand_P(PSTR("G28"));
  1015. enquecommand_P(PSTR("G21")); //set units to millimeters
  1016. enquecommand_P(PSTR("G90")); //use absolute coordinates
  1017. enquecommand_P(PSTR("M83")); //use relative distances for extrusion
  1018. enquecommand_P(PSTR("G92 E0"));
  1019. enquecommand_P(PSTR("M203 E100"));
  1020. enquecommand_P(PSTR("M92 E140"));
  1021. lcd_commands_step = 9;
  1022. }
  1023. if (lcd_commands_step == 9 && !blocks_queued() && cmd_buffer_empty())
  1024. {
  1025. lcd_timeoutToStatus.start();
  1026. enquecommand_P(PSTR("G1 Z0.250 F7200.000"));
  1027. enquecommand_P(PSTR("G1 X50.0 E80.0 F1000.0"));
  1028. enquecommand_P(PSTR("G1 X160.0 E20.0 F1000.0"));
  1029. enquecommand_P(PSTR("G1 Z0.200 F7200.000"));
  1030. enquecommand_P(PSTR("G1 X220.0 E13 F1000.0"));
  1031. enquecommand_P(PSTR("G1 X240.0 E0 F1000.0"));
  1032. enquecommand_P(PSTR("G92 E0.0"));
  1033. enquecommand_P(PSTR("G21"));
  1034. enquecommand_P(PSTR("G90"));
  1035. enquecommand_P(PSTR("M83"));
  1036. enquecommand_P(PSTR("G1 E-4 F2100.00000"));
  1037. enquecommand_P(PSTR("G1 Z0.150 F7200.000"));
  1038. enquecommand_P(PSTR("M204 S1000"));
  1039. enquecommand_P(PSTR("G1 F4000"));
  1040. lcd_clear();
  1041. menu_goto(lcd_babystep_z, 0, false, true);
  1042. lcd_commands_step = 8;
  1043. }
  1044. if (lcd_commands_step == 8 && !blocks_queued() && cmd_buffer_empty()) //draw meander
  1045. {
  1046. lcd_timeoutToStatus.start();
  1047. enquecommand_P(PSTR("G1 X50 Y155"));
  1048. enquecommand_P(PSTR("G1 X60 Y155 E4"));
  1049. enquecommand_P(PSTR("G1 F1080"));
  1050. enquecommand_P(PSTR("G1 X75 Y155 E2.5"));
  1051. enquecommand_P(PSTR("G1 X100 Y155 E2"));
  1052. enquecommand_P(PSTR("G1 X200 Y155 E2.62773"));
  1053. enquecommand_P(PSTR("G1 X200 Y135 E0.66174"));
  1054. enquecommand_P(PSTR("G1 X50 Y135 E3.62773"));
  1055. enquecommand_P(PSTR("G1 X50 Y115 E0.49386"));
  1056. enquecommand_P(PSTR("G1 X200 Y115 E3.62773"));
  1057. enquecommand_P(PSTR("G1 X200 Y95 E0.49386"));
  1058. enquecommand_P(PSTR("G1 X50 Y95 E3.62773"));
  1059. enquecommand_P(PSTR("G1 X50 Y75 E0.49386"));
  1060. enquecommand_P(PSTR("G1 X200 Y75 E3.62773"));
  1061. enquecommand_P(PSTR("G1 X200 Y55 E0.49386"));
  1062. enquecommand_P(PSTR("G1 X50 Y55 E3.62773"));
  1063. lcd_commands_step = 7;
  1064. }
  1065. if (lcd_commands_step == 7 && !blocks_queued() && cmd_buffer_empty())
  1066. {
  1067. lcd_timeoutToStatus.start();
  1068. strcpy(cmd1, "G1 X50 Y35 E");
  1069. strcat(cmd1, ftostr43(extr));
  1070. enquecommand(cmd1);
  1071. for (int i = 0; i < 4; i++) {
  1072. strcpy(cmd1, "G1 X70 Y");
  1073. strcat(cmd1, ftostr32(35 - i*width * 2));
  1074. strcat(cmd1, " E");
  1075. strcat(cmd1, ftostr43(extr));
  1076. enquecommand(cmd1);
  1077. strcpy(cmd1, "G1 Y");
  1078. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  1079. strcat(cmd1, " E");
  1080. strcat(cmd1, ftostr43(extr_short_segment));
  1081. enquecommand(cmd1);
  1082. strcpy(cmd1, "G1 X50 Y");
  1083. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  1084. strcat(cmd1, " E");
  1085. strcat(cmd1, ftostr43(extr));
  1086. enquecommand(cmd1);
  1087. strcpy(cmd1, "G1 Y");
  1088. strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
  1089. strcat(cmd1, " E");
  1090. strcat(cmd1, ftostr43(extr_short_segment));
  1091. enquecommand(cmd1);
  1092. }
  1093. lcd_commands_step = 6;
  1094. }
  1095. if (lcd_commands_step == 6 && !blocks_queued() && cmd_buffer_empty())
  1096. {
  1097. lcd_timeoutToStatus.start();
  1098. for (int i = 4; i < 8; i++) {
  1099. strcpy(cmd1, "G1 X70 Y");
  1100. strcat(cmd1, ftostr32(35 - i*width * 2));
  1101. strcat(cmd1, " E");
  1102. strcat(cmd1, ftostr43(extr));
  1103. enquecommand(cmd1);
  1104. strcpy(cmd1, "G1 Y");
  1105. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  1106. strcat(cmd1, " E");
  1107. strcat(cmd1, ftostr43(extr_short_segment));
  1108. enquecommand(cmd1);
  1109. strcpy(cmd1, "G1 X50 Y");
  1110. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  1111. strcat(cmd1, " E");
  1112. strcat(cmd1, ftostr43(extr));
  1113. enquecommand(cmd1);
  1114. strcpy(cmd1, "G1 Y");
  1115. strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
  1116. strcat(cmd1, " E");
  1117. strcat(cmd1, ftostr43(extr_short_segment));
  1118. enquecommand(cmd1);
  1119. }
  1120. lcd_commands_step = 5;
  1121. }
  1122. if (lcd_commands_step == 5 && !blocks_queued() && cmd_buffer_empty())
  1123. {
  1124. lcd_timeoutToStatus.start();
  1125. for (int i = 8; i < 12; i++) {
  1126. strcpy(cmd1, "G1 X70 Y");
  1127. strcat(cmd1, ftostr32(35 - i*width * 2));
  1128. strcat(cmd1, " E");
  1129. strcat(cmd1, ftostr43(extr));
  1130. enquecommand(cmd1);
  1131. strcpy(cmd1, "G1 Y");
  1132. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  1133. strcat(cmd1, " E");
  1134. strcat(cmd1, ftostr43(extr_short_segment));
  1135. enquecommand(cmd1);
  1136. strcpy(cmd1, "G1 X50 Y");
  1137. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  1138. strcat(cmd1, " E");
  1139. strcat(cmd1, ftostr43(extr));
  1140. enquecommand(cmd1);
  1141. strcpy(cmd1, "G1 Y");
  1142. strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
  1143. strcat(cmd1, " E");
  1144. strcat(cmd1, ftostr43(extr_short_segment));
  1145. enquecommand(cmd1);
  1146. }
  1147. lcd_commands_step = 4;
  1148. }
  1149. if (lcd_commands_step == 4 && !blocks_queued() && cmd_buffer_empty())
  1150. {
  1151. lcd_timeoutToStatus.start();
  1152. for (int i = 12; i < 16; i++) {
  1153. strcpy(cmd1, "G1 X70 Y");
  1154. strcat(cmd1, ftostr32(35 - i*width * 2));
  1155. strcat(cmd1, " E");
  1156. strcat(cmd1, ftostr43(extr));
  1157. enquecommand(cmd1);
  1158. strcpy(cmd1, "G1 Y");
  1159. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  1160. strcat(cmd1, " E");
  1161. strcat(cmd1, ftostr43(extr_short_segment));
  1162. enquecommand(cmd1);
  1163. strcpy(cmd1, "G1 X50 Y");
  1164. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  1165. strcat(cmd1, " E");
  1166. strcat(cmd1, ftostr43(extr));
  1167. enquecommand(cmd1);
  1168. strcpy(cmd1, "G1 Y");
  1169. strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
  1170. strcat(cmd1, " E");
  1171. strcat(cmd1, ftostr43(extr_short_segment));
  1172. enquecommand(cmd1);
  1173. }
  1174. lcd_commands_step = 3;
  1175. }
  1176. if (lcd_commands_step == 3 && !blocks_queued() && cmd_buffer_empty())
  1177. {
  1178. lcd_timeoutToStatus.start();
  1179. enquecommand_P(PSTR("G1 E-0.07500 F2100.00000"));
  1180. enquecommand_P(PSTR("G4 S0"));
  1181. enquecommand_P(PSTR("G1 E-4 F2100.00000"));
  1182. enquecommand_P(PSTR("G1 Z0.5 F7200.000"));
  1183. enquecommand_P(PSTR("G1 X245 Y1"));
  1184. enquecommand_P(PSTR("G1 X240 E4"));
  1185. enquecommand_P(PSTR("G1 F4000"));
  1186. enquecommand_P(PSTR("G1 X190 E2.7"));
  1187. enquecommand_P(PSTR("G1 F4600"));
  1188. enquecommand_P(PSTR("G1 X110 E2.8"));
  1189. enquecommand_P(PSTR("G1 F5200"));
  1190. enquecommand_P(PSTR("G1 X40 E3"));
  1191. enquecommand_P(PSTR("G1 E-15.0000 F5000"));
  1192. enquecommand_P(PSTR("G1 E-50.0000 F5400"));
  1193. enquecommand_P(PSTR("G1 E-15.0000 F3000"));
  1194. enquecommand_P(PSTR("G1 E-12.0000 F2000"));
  1195. enquecommand_P(PSTR("G1 F1600"));
  1196. lcd_commands_step = 2;
  1197. }
  1198. if (lcd_commands_step == 2 && !blocks_queued() && cmd_buffer_empty())
  1199. {
  1200. lcd_timeoutToStatus.start();
  1201. enquecommand_P(PSTR("G1 X0 Y1 E3.0000"));
  1202. enquecommand_P(PSTR("G1 X50 Y1 E-5.0000"));
  1203. enquecommand_P(PSTR("G1 F2000"));
  1204. enquecommand_P(PSTR("G1 X0 Y1 E5.0000"));
  1205. enquecommand_P(PSTR("G1 X50 Y1 E-5.0000"));
  1206. enquecommand_P(PSTR("G1 F2400"));
  1207. enquecommand_P(PSTR("G1 X0 Y1 E5.0000"));
  1208. enquecommand_P(PSTR("G1 X50 Y1 E-5.0000"));
  1209. enquecommand_P(PSTR("G1 F2400"));
  1210. enquecommand_P(PSTR("G1 X0 Y1 E5.0000"));
  1211. enquecommand_P(PSTR("G1 X50 Y1 E-3.0000"));
  1212. enquecommand_P(PSTR("G4 S0"));
  1213. enquecommand_P(PSTR("M107"));
  1214. enquecommand_P(PSTR("M104 S0"));
  1215. enquecommand_P(PSTR("M140 S0"));
  1216. enquecommand_P(PSTR("G1 X10 Y180 F4000"));
  1217. enquecommand_P(PSTR("G1 Z10 F1300.000"));
  1218. enquecommand_P(PSTR("M84"));
  1219. lcd_commands_step = 1;
  1220. }
  1221. if (lcd_commands_step == 1 && !blocks_queued() && cmd_buffer_empty())
  1222. {
  1223. lcd_setstatuspgm(_T(WELCOME_MSG));
  1224. lcd_commands_step = 0;
  1225. lcd_commands_type = 0;
  1226. if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) == 1) {
  1227. lcd_wizard(WizState::RepeatLay1Cal);
  1228. }
  1229. }
  1230. }
  1231. #else //if not SNMM
  1232. if (lcd_commands_type == LcdCommands::Layer1Cal)
  1233. {
  1234. char cmd1[30];
  1235. if(lcd_commands_step>1) lcd_timeoutToStatus.start(); //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen
  1236. if (!blocks_queued() && cmd_buffer_empty() && !saved_printing)
  1237. {
  1238. switch(lcd_commands_step)
  1239. {
  1240. case 0:
  1241. lcd_commands_step = 11;
  1242. break;
  1243. case 11:
  1244. lay1cal_wait_preheat();
  1245. lcd_commands_step = 10;
  1246. break;
  1247. case 10:
  1248. lay1cal_load_filament(cmd1, lay1cal_filament);
  1249. lcd_commands_step = 9;
  1250. break;
  1251. case 9:
  1252. lcd_clear();
  1253. menu_depth = 0;
  1254. menu_submenu(lcd_babystep_z);
  1255. lay1cal_intro_line();
  1256. lcd_commands_step = 8;
  1257. break;
  1258. case 8:
  1259. lay1cal_before_meander();
  1260. lcd_commands_step = 7;
  1261. break;
  1262. case 7:
  1263. lay1cal_meander(cmd1);
  1264. lcd_commands_step = 6;
  1265. break;
  1266. case 6:
  1267. for (uint8_t i = 0; i < 4; i++)
  1268. {
  1269. lay1cal_square(cmd1, i);
  1270. }
  1271. lcd_commands_step = 5;
  1272. break;
  1273. case 5:
  1274. for (uint8_t i = 4; i < 8; i++)
  1275. {
  1276. lay1cal_square(cmd1, i);
  1277. }
  1278. lcd_commands_step = 4;
  1279. break;
  1280. case 4:
  1281. for (uint8_t i = 8; i < 12; i++)
  1282. {
  1283. lay1cal_square(cmd1, i);
  1284. }
  1285. lcd_commands_step = 3;
  1286. break;
  1287. case 3:
  1288. for (uint8_t i = 12; i < 16; i++)
  1289. {
  1290. lay1cal_square(cmd1, i);
  1291. }
  1292. lcd_commands_step = 2;
  1293. break;
  1294. case 2:
  1295. enquecommand_P(PSTR("M107")); //turn off printer fan
  1296. enquecommand_P(PSTR("G1 E-0.07500 F2100.00000")); //retract
  1297. enquecommand_P(PSTR("M104 S0")); // turn off temperature
  1298. enquecommand_P(PSTR("M140 S0")); // turn off heatbed
  1299. enquecommand_P(PSTR("G1 Z10 F1300.000")); //lift Z
  1300. enquecommand_P(PSTR("G1 X10 Y180 F4000")); //Go to parking position
  1301. if (mmu_enabled) enquecommand_P(PSTR("M702 C")); //unload from nozzle
  1302. enquecommand_P(PSTR("M84"));// disable motors
  1303. forceMenuExpire = true; //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen
  1304. lcd_commands_step = 1;
  1305. break;
  1306. case 1:
  1307. lcd_setstatuspgm(_T(WELCOME_MSG));
  1308. lcd_commands_step = 0;
  1309. lcd_commands_type = LcdCommands::Idle;
  1310. if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) == 1)
  1311. {
  1312. lcd_wizard(WizState::RepeatLay1Cal);
  1313. }
  1314. break;
  1315. }
  1316. }
  1317. }
  1318. #endif // not SNMM
  1319. if (lcd_commands_type == LcdCommands::FarmModeConfirm) /// farm mode confirm
  1320. {
  1321. if (lcd_commands_step == 0) { lcd_commands_step = 6; }
  1322. if (lcd_commands_step == 1 && !blocks_queued())
  1323. {
  1324. lcd_confirm_print();
  1325. lcd_commands_step = 0;
  1326. lcd_commands_type = LcdCommands::Idle;
  1327. }
  1328. if (lcd_commands_step == 2 && !blocks_queued())
  1329. {
  1330. lcd_commands_step = 1;
  1331. }
  1332. if (lcd_commands_step == 3 && !blocks_queued())
  1333. {
  1334. lcd_commands_step = 2;
  1335. }
  1336. if (lcd_commands_step == 4 && !blocks_queued())
  1337. {
  1338. enquecommand_P(PSTR("G90"));
  1339. enquecommand_P(PSTR("G1 X" STRINGIFY(X_CANCEL_POS) " Y" STRINGIFY(Y_CANCEL_POS) " E0 F7000"));
  1340. lcd_commands_step = 3;
  1341. }
  1342. if (lcd_commands_step == 5 && !blocks_queued())
  1343. {
  1344. lcd_commands_step = 4;
  1345. }
  1346. if (lcd_commands_step == 6 && !blocks_queued())
  1347. {
  1348. enquecommand_P(PSTR("G91"));
  1349. enquecommand_P(PSTR("G1 Z15 F1500"));
  1350. st_synchronize();
  1351. #ifdef SNMM
  1352. lcd_commands_step = 7;
  1353. #else
  1354. lcd_commands_step = 5;
  1355. #endif
  1356. }
  1357. }
  1358. if (lcd_commands_type == LcdCommands::PidExtruder) {
  1359. char cmd1[30];
  1360. if (lcd_commands_step == 0) {
  1361. custom_message_type = CustomMsg::PidCal;
  1362. custom_message_state = 1;
  1363. lcd_draw_update = 3;
  1364. lcd_commands_step = 3;
  1365. }
  1366. if (lcd_commands_step == 3 && !blocks_queued()) { //PID calibration
  1367. strcpy(cmd1, "M303 E0 S");
  1368. strcat(cmd1, ftostr3(pid_temp));
  1369. // setting the correct target temperature (for visualization) is done in PID_autotune
  1370. enquecommand(cmd1);
  1371. lcd_setstatuspgm(_i("PID cal. "));////MSG_PID_RUNNING c=20 r=1
  1372. lcd_commands_step = 2;
  1373. }
  1374. if (lcd_commands_step == 2 && pid_tuning_finished) { //saving to eeprom
  1375. pid_tuning_finished = false;
  1376. custom_message_state = 0;
  1377. lcd_setstatuspgm(_i("PID cal. finished"));////MSG_PID_FINISHED c=20 r=1
  1378. setAllTargetHotends(0); // reset all hotends temperature including the number displayed on the main screen
  1379. if (_Kp != 0 || _Ki != 0 || _Kd != 0) {
  1380. strcpy(cmd1, "M301 P");
  1381. strcat(cmd1, ftostr32(_Kp));
  1382. strcat(cmd1, " I");
  1383. strcat(cmd1, ftostr32(_Ki));
  1384. strcat(cmd1, " D");
  1385. strcat(cmd1, ftostr32(_Kd));
  1386. enquecommand(cmd1);
  1387. enquecommand_P(PSTR("M500"));
  1388. }
  1389. else {
  1390. SERIAL_ECHOPGM("Invalid PID cal. results. Not stored to EEPROM.");
  1391. }
  1392. display_time = _millis();
  1393. lcd_commands_step = 1;
  1394. }
  1395. if ((lcd_commands_step == 1) && ((_millis()- display_time)>2000)) { //calibration finished message
  1396. lcd_setstatuspgm(_T(WELCOME_MSG));
  1397. custom_message_type = CustomMsg::Status;
  1398. pid_temp = DEFAULT_PID_TEMP;
  1399. lcd_commands_step = 0;
  1400. lcd_commands_type = LcdCommands::Idle;
  1401. }
  1402. }
  1403. }
  1404. void lcd_return_to_status()
  1405. {
  1406. lcd_refresh(); // to maybe revive the LCD if static electricity killed it.
  1407. menu_goto(lcd_status_screen, 0, false, true);
  1408. menu_depth = 0;
  1409. eFilamentAction = FilamentAction::None; // i.e. non-autoLoad
  1410. }
  1411. //! @brief Pause print, disable nozzle heater, move to park position
  1412. void lcd_pause_print()
  1413. {
  1414. stop_and_save_print_to_ram(0.0, -default_retraction);
  1415. lcd_return_to_status();
  1416. isPrintPaused = true;
  1417. if (LcdCommands::Idle == lcd_commands_type)
  1418. {
  1419. lcd_commands_type = LcdCommands::LongPause;
  1420. }
  1421. SERIAL_PROTOCOLLNRPGM(MSG_OCTOPRINT_PAUSED); //pause for octoprint
  1422. }
  1423. float move_menu_scale;
  1424. static void lcd_move_menu_axis();
  1425. /* Menu implementation */
  1426. static void lcd_cooldown()
  1427. {
  1428. setAllTargetHotends(0);
  1429. setTargetBed(0);
  1430. fanSpeed = 0;
  1431. eFilamentAction = FilamentAction::None;
  1432. lcd_return_to_status();
  1433. }
  1434. //! @brief append text label with a colon and format it into a fixed size output buffer
  1435. //! It would have been much easier if there was a ':' in the labels.
  1436. //! But since the texts like Bed, Nozzle and PINDA are used in other places
  1437. //! it is better to reuse these texts even though it requires some extra formatting code.
  1438. //! @param [in] ipgmLabel pointer to string in PROGMEM
  1439. //! @param [out] pointer to string in RAM which will receive the formatted text. Must be allocated to appropriate size
  1440. //! @param [in] dstSize allocated length of dst
  1441. static void pgmtext_with_colon(const char *ipgmLabel, char *dst, uint8_t dstSize){
  1442. uint8_t i = 0;
  1443. for(; i < dstSize - 2; ++i){ // 2 byte less than buffer, we'd be adding a ':' to the end
  1444. uint8_t b = pgm_read_byte(ipgmLabel + i);
  1445. if( ! b )
  1446. break;
  1447. dst[i] = b;
  1448. }
  1449. dst[i] = ':'; // append the colon
  1450. ++i;
  1451. for(; i < dstSize - 1; ++i) // fill the rest with spaces
  1452. dst[i] = ' ';
  1453. dst[dstSize-1] = '\0'; // terminate the string properly
  1454. }
  1455. //! @brief Show Extruder Info
  1456. //!
  1457. //! @code{.unparsed}
  1458. //! |01234567890123456789|
  1459. //! |Nozzle FAN: 0000 RPM| FAN c=10 r=1 SPEED c=3 r=1
  1460. //! |Print FAN: 0000 RPM| FAN c=10 r=1 SPEED c=3 r=1
  1461. //! |Fil. Xd:000 Yd:000 | Fil. c=4 r=1
  1462. //! |Int: 000 Shut: 000 | Int: c=4 r=1 Shut: c=4 r=1
  1463. //! ----------------------
  1464. //! @endcode
  1465. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1466. void lcd_menu_extruder_info() // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
  1467. {
  1468. // Display Nozzle fan RPM
  1469. lcd_timeoutToStatus.stop(); //infinite timeout
  1470. lcd_home();
  1471. static const size_t maxChars = 12;
  1472. char nozzle[maxChars], print[maxChars];
  1473. pgmtext_with_colon(_i("Nozzle FAN"), nozzle, maxChars); ////c=10 r=1
  1474. pgmtext_with_colon(_i("Print FAN"), print, maxChars); ////c=10 r=1
  1475. lcd_printf_P(_N("%s %4d RPM\n" "%s %4d RPM\n"), nozzle, 60*fan_speed[0], print, 60*fan_speed[1] );
  1476. #ifdef PAT9125
  1477. // Display X and Y difference from Filament sensor
  1478. // Display Light intensity from Filament sensor
  1479. // Frame_Avg register represents the average brightness of all pixels within a frame (324 pixels). This
  1480. // value ranges from 0(darkest) to 255(brightest).
  1481. // Display LASER shutter time from Filament sensor
  1482. // Shutter register is an index of LASER shutter time. It is automatically controlled by the chip's internal
  1483. // auto-exposure algorithm. When the chip is tracking on a good reflection surface, the Shutter is small.
  1484. // When the chip is tracking on a poor reflection surface, the Shutter is large. Value ranges from 0 to 46.
  1485. if (mmu_enabled == false)
  1486. {
  1487. if (!fsensor_enabled)
  1488. lcd_puts_P(_N("Filament sensor\n" "is disabled."));
  1489. else
  1490. {
  1491. if (!moves_planned() && !IS_SD_PRINTING && !is_usb_printing && (lcd_commands_type != LcdCommands::Layer1Cal))
  1492. pat9125_update();
  1493. lcd_printf_P(_N(
  1494. "Fil. Xd:%3d Yd:%3d\n" ////c=4 r=1
  1495. "Int: %3d " ////c=4 r=1
  1496. "Shut: %3d" ////c=4 r=1
  1497. ),
  1498. pat9125_x, pat9125_y,
  1499. pat9125_b, pat9125_s
  1500. );
  1501. }
  1502. }
  1503. #endif //PAT9125
  1504. menu_back_if_clicked();
  1505. }
  1506. //! @brief Show Fails Statistics MMU
  1507. //!
  1508. //! @code{.unparsed}
  1509. //! |01234567890123456789|
  1510. //! | Main | c=18 r=1
  1511. //! | Last print | c=18 r=1
  1512. //! | Total | c=18 r=1
  1513. //! | |
  1514. //! ----------------------
  1515. //! @endcode
  1516. static void lcd_menu_fails_stats_mmu()
  1517. {
  1518. MENU_BEGIN();
  1519. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  1520. MENU_ITEM_SUBMENU_P(_i("Last print"), lcd_menu_fails_stats_mmu_print); ////c=18 r=1
  1521. MENU_ITEM_SUBMENU_P(_i("Total"), lcd_menu_fails_stats_mmu_total); ////c=18 r=1
  1522. MENU_END();
  1523. }
  1524. //! @brief Show Last Print Failures Statistics MMU
  1525. //!
  1526. //! @code{.unparsed}
  1527. //! |01234567890123456789|
  1528. //! |Last print failures | c=20 r=1
  1529. //! | MMU fails: 000| c=14 r=1
  1530. //! | MMU load fails: 000| c=14 r=1
  1531. //! | |
  1532. //! ----------------------
  1533. //! @endcode
  1534. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1535. static void lcd_menu_fails_stats_mmu_print()
  1536. {
  1537. lcd_timeoutToStatus.stop(); //infinite timeout
  1538. uint8_t fails = eeprom_read_byte((uint8_t*)EEPROM_MMU_FAIL);
  1539. uint16_t load_fails = eeprom_read_byte((uint8_t*)EEPROM_MMU_LOAD_FAIL);
  1540. lcd_home();
  1541. lcd_printf_P(PSTR("%S\n" " %-16.16S%-3d\n" " %-16.16S%-3d"),
  1542. _i("Last print failures"), ////c=20 r=1
  1543. _i("MMU fails"), fails, ////c=14 r=1
  1544. _i("MMU load fails"), load_fails); ////c=14 r=1
  1545. menu_back_if_clicked_fb();
  1546. }
  1547. //! @brief Show Total Failures Statistics MMU
  1548. //!
  1549. //! @code{.unparsed}
  1550. //! |01234567890123456789|
  1551. //! |Total failures | c=20 r=1
  1552. //! | MMU fails: 000| c=14 r=1
  1553. //! | MMU load fails: 000| c=14 r=1
  1554. //! | MMU power fails:000| c=14 r=1
  1555. //! ----------------------
  1556. //! @endcode
  1557. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1558. static void lcd_menu_fails_stats_mmu_total()
  1559. {
  1560. mmu_command(MmuCmd::S3);
  1561. lcd_timeoutToStatus.stop(); //infinite timeout
  1562. uint8_t fails = eeprom_read_byte((uint8_t*)EEPROM_MMU_FAIL_TOT);
  1563. uint16_t load_fails = eeprom_read_byte((uint8_t*)EEPROM_MMU_LOAD_FAIL_TOT);
  1564. lcd_home();
  1565. lcd_printf_P(PSTR("%S\n" " %-16.16S%-3d\n" " %-16.16S%-3d\n" " %-16.16S%-3d"),
  1566. _i("Total failures"), ////c=20 r=1
  1567. _i("MMU fails"), fails, ////c=14 r=1
  1568. _i("MMU load fails"), load_fails, ////c=14 r=1
  1569. _i("MMU power fails"), mmu_power_failures); ////c=14 r=1
  1570. menu_back_if_clicked_fb();
  1571. }
  1572. #if defined(TMC2130) && defined(FILAMENT_SENSOR)
  1573. static const char failStatsFmt[] PROGMEM = "%S\n" " %-16.16S%-3d\n" " %-16.16S%-3d\n" " %-7.7SX %-3d Y %-3d";
  1574. //! @brief Show Total Failures Statistics MMU
  1575. //!
  1576. //! @code{.unparsed}
  1577. //! |01234567890123456789|
  1578. //! |Total failures | c=20 r=1
  1579. //! | Power failures: 000| c=14 r=1
  1580. //! | Filam. runouts: 000| c=14 r=1
  1581. //! | Crash X:000 Y:000| c=7 r=1
  1582. //! ----------------------
  1583. //! @endcode
  1584. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1585. static void lcd_menu_fails_stats_total()
  1586. {
  1587. lcd_timeoutToStatus.stop(); //infinite timeout
  1588. uint16_t power = eeprom_read_word((uint16_t*)EEPROM_POWER_COUNT_TOT);
  1589. uint16_t filam = eeprom_read_word((uint16_t*)EEPROM_FERROR_COUNT_TOT);
  1590. uint16_t crashX = eeprom_read_word((uint16_t*)EEPROM_CRASH_COUNT_X_TOT);
  1591. uint16_t crashY = eeprom_read_word((uint16_t*)EEPROM_CRASH_COUNT_Y_TOT);
  1592. lcd_home();
  1593. lcd_printf_P(failStatsFmt,
  1594. _i("Total failures"), ////c=20 r=1
  1595. _i("Power failures"), power, ////c=14 r=1
  1596. _i("Filam. runouts"), filam, ////c=14 r=1
  1597. _i("Crash"), crashX, crashY); ////c=7 r=1
  1598. menu_back_if_clicked_fb();
  1599. }
  1600. //! @brief Show Last Print Failures Statistics
  1601. //!
  1602. //! @code{.unparsed}
  1603. //! |01234567890123456789|
  1604. //! |Last print failures | c=20 r=1
  1605. //! | Power failures 000| c=14 r=1
  1606. //! | Filam. runouts 000| c=14 r=1
  1607. //! | Crash X:000 Y:000| c=7 r=1
  1608. //! ----------------------
  1609. //! @endcode
  1610. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1611. static void lcd_menu_fails_stats_print()
  1612. {
  1613. lcd_timeoutToStatus.stop(); //infinite timeout
  1614. uint8_t power = eeprom_read_byte((uint8_t*)EEPROM_POWER_COUNT);
  1615. uint8_t filam = eeprom_read_byte((uint8_t*)EEPROM_FERROR_COUNT);
  1616. uint8_t crashX = eeprom_read_byte((uint8_t*)EEPROM_CRASH_COUNT_X);
  1617. uint8_t crashY = eeprom_read_byte((uint8_t*)EEPROM_CRASH_COUNT_Y);
  1618. lcd_home();
  1619. #ifndef PAT9125
  1620. lcd_printf_P(failStatsFmt,
  1621. _i("Last print failures"), ////c=20 r=1
  1622. _i("Power failures"), power, ////c=14 r=1
  1623. _i("Filam. runouts"), filam, ////c=14 r=1
  1624. _i("Crash"), crashX, crashY); ////c=7 r=1
  1625. #else
  1626. // On the MK3 include detailed PAT9125 statistics about soft failures
  1627. lcd_printf_P(PSTR("%S\n"
  1628. " %-16.16S%-3d\n"
  1629. " %-7.7S H %-3d S %-3d\n"
  1630. " %-7.7S X %-3d Y %-3d"),
  1631. _i("Last print failures"), ////c=20 r=1
  1632. _i("Power failures"), power, ////c=14 r=1
  1633. _i("Runouts"), filam, fsensor_softfail, //c=7
  1634. _i("Crash"), crashX, crashY); ////c=7 r=1
  1635. #endif
  1636. menu_back_if_clicked_fb();
  1637. }
  1638. //! @brief Open fail statistics menu
  1639. //!
  1640. //! This version of function is used, when there is filament sensor,
  1641. //! power failure and crash detection.
  1642. //! There are Last print and Total menu items.
  1643. //!
  1644. //! @code{.unparsed}
  1645. //! |01234567890123456789|
  1646. //! | Main | c=18 r=1
  1647. //! | Last print | c=18 r=1
  1648. //! | Total | c=18 r=1
  1649. //! | |
  1650. //! ----------------------
  1651. //! @endcode
  1652. static void lcd_menu_fails_stats()
  1653. {
  1654. MENU_BEGIN();
  1655. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  1656. MENU_ITEM_SUBMENU_P(_i("Last print"), lcd_menu_fails_stats_print); ////c=18 r=1
  1657. MENU_ITEM_SUBMENU_P(_i("Total"), lcd_menu_fails_stats_total); ////c=18 r=1
  1658. MENU_END();
  1659. }
  1660. #elif defined(FILAMENT_SENSOR)
  1661. static const char failStatsFmt[] PROGMEM = "%S\n" " %-16.16S%-3d\n" "%S\n" " %-16.16S%-3d\n";
  1662. //!
  1663. //! @brief Print last print and total filament run outs
  1664. //!
  1665. //! This version of function is used, when there is filament sensor,
  1666. //! but no other sensors (e.g. power failure, crash detection).
  1667. //!
  1668. //! Example screen:
  1669. //! @code{.unparsed}
  1670. //! |01234567890123456789|
  1671. //! |Last print failures | c=20 r=1
  1672. //! | Filam. runouts 000| c=14 r=1
  1673. //! |Total failures | c=20 r=1
  1674. //! | Filam. runouts 000| c=14 r=1
  1675. //! ----------------------
  1676. //! @endcode
  1677. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1678. static void lcd_menu_fails_stats()
  1679. {
  1680. lcd_timeoutToStatus.stop(); //infinite timeout
  1681. uint8_t filamentLast = eeprom_read_byte((uint8_t*)EEPROM_FERROR_COUNT);
  1682. uint16_t filamentTotal = eeprom_read_word((uint16_t*)EEPROM_FERROR_COUNT_TOT);
  1683. lcd_home();
  1684. lcd_printf_P(failStatsFmt,
  1685. _i("Last print failures"), ////c=20 r=1
  1686. _i("Filam. runouts"), filamentLast, ////c=14 r=1
  1687. _i("Total failures"), ////c=20 r=1
  1688. _i("Filam. runouts"), filamentTotal); ////c=14 r=1
  1689. menu_back_if_clicked();
  1690. }
  1691. #else
  1692. static void lcd_menu_fails_stats()
  1693. {
  1694. lcd_timeoutToStatus.stop(); //infinite timeout
  1695. MENU_BEGIN();
  1696. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  1697. MENU_END();
  1698. }
  1699. #endif //TMC2130
  1700. #ifdef DEBUG_BUILD
  1701. #ifdef DEBUG_STACK_MONITOR
  1702. extern uint16_t SP_min;
  1703. extern char* __malloc_heap_start;
  1704. extern char* __malloc_heap_end;
  1705. #endif //DEBUG_STACK_MONITOR
  1706. //! @brief Show Debug Information
  1707. //!
  1708. //! @code{.unparsed}
  1709. //! |01234567890123456789|
  1710. //! |RAM statistics | c=20 r=1
  1711. //! | SP_min: 0000| c=14 r=1
  1712. //! | heap_start: 0000| c=14 r=1
  1713. //! | heap_end: 0000| c=14 r=1
  1714. //! ----------------------
  1715. //! @endcode
  1716. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1717. static void lcd_menu_debug()
  1718. {
  1719. #ifdef DEBUG_STACK_MONITOR
  1720. lcd_home();
  1721. lcd_printf_P(PSTR("RAM statistics\n" ////c=20 r=1
  1722. " SP_min: 0x%04x\n" ////c=14 r=1
  1723. " heap_start: 0x%04x\n" ////c=14 r=1
  1724. " heap_end: 0x%04x"), SP_min, __malloc_heap_start, __malloc_heap_end); ////c=14 r=1
  1725. #endif //DEBUG_STACK_MONITOR
  1726. menu_back_if_clicked_fb();
  1727. }
  1728. #endif /* DEBUG_BUILD */
  1729. //! @brief common line print for lcd_menu_temperatures
  1730. //! @param [in] ipgmLabel pointer to string in PROGMEM
  1731. //! @param [in] value to be printed behind the label
  1732. static void lcd_menu_temperatures_line(const char *ipgmLabel, int value){
  1733. static const size_t maxChars = 15;
  1734. char tmp[maxChars];
  1735. pgmtext_with_colon(ipgmLabel, tmp, maxChars);
  1736. lcd_printf_P(PSTR(" %s%3d\x01 \n"), tmp, value); // no need to add -14.14 to string alignment
  1737. }
  1738. //! @brief Show Temperatures
  1739. //!
  1740. //! @code{.unparsed}
  1741. //! |01234567890123456789|
  1742. //! | Nozzle: 000D| c=14 r=1
  1743. //! | Bed: 000D| c=14 r=1
  1744. //! | Ambient: 000D| c=14 r=1
  1745. //! | PINDA: 000D| c=14 r=1
  1746. //! ----------------------
  1747. //! D - Degree sysmbol LCD_STR_DEGREE
  1748. //! @endcode
  1749. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1750. static void lcd_menu_temperatures()
  1751. {
  1752. lcd_timeoutToStatus.stop(); //infinite timeout
  1753. lcd_home();
  1754. lcd_menu_temperatures_line( _T(MSG_NOZZLE), (int)current_temperature[0] ); ////c=14 r=1
  1755. lcd_menu_temperatures_line( _T(MSG_BED), (int)current_temperature_bed ); ////c=14 r=1
  1756. #ifdef AMBIENT_THERMISTOR
  1757. lcd_menu_temperatures_line( _i("Ambient"), (int)current_temperature_ambient ); ////c=14 r=1
  1758. #endif //AMBIENT_THERMISTOR
  1759. #ifdef PINDA_THERMISTOR
  1760. lcd_menu_temperatures_line( _i("PINDA"), (int)current_temperature_pinda ); ////c=14
  1761. #endif //PINDA_THERMISTOR
  1762. menu_back_if_clicked();
  1763. }
  1764. #if defined (VOLT_BED_PIN) || defined (VOLT_PWR_PIN) || defined(IR_SENSOR_ANALOG)
  1765. #define VOLT_DIV_R1 10000
  1766. #define VOLT_DIV_R2 2370
  1767. #define VOLT_DIV_FAC ((float)VOLT_DIV_R2 / (VOLT_DIV_R2 + VOLT_DIV_R1))
  1768. //! @brief Show Voltages
  1769. //!
  1770. //! @code{.unparsed}
  1771. //! |01234567890123456789|
  1772. //! | |
  1773. //! | PWR: 00.0V | c=12 r=1
  1774. //! | Bed: 00.0V | c=12 r=1
  1775. //! | IR : 00.0V | c=12 r=1 optional
  1776. //! ----------------------
  1777. //! @endcode
  1778. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1779. static void lcd_menu_voltages()
  1780. {
  1781. lcd_timeoutToStatus.stop(); //infinite timeout
  1782. float volt_pwr = VOLT_DIV_REF * ((float)current_voltage_raw_pwr / (1023 * OVERSAMPLENR)) / VOLT_DIV_FAC;
  1783. float volt_bed = VOLT_DIV_REF * ((float)current_voltage_raw_bed / (1023 * OVERSAMPLENR)) / VOLT_DIV_FAC;
  1784. lcd_home();
  1785. lcd_printf_P(PSTR(" PWR: %4.1fV\n" " BED: %4.1fV"), volt_pwr, volt_bed);
  1786. #ifdef IR_SENSOR_ANALOG
  1787. lcd_printf_P(PSTR("\n IR : %3.1fV"), Raw2Voltage(current_voltage_raw_IR));
  1788. #endif //IR_SENSOR_ANALOG
  1789. menu_back_if_clicked();
  1790. }
  1791. #endif //defined (VOLT_BED_PIN) || defined (VOLT_PWR_PIN) || defined(IR_SENSOR_ANALOG)
  1792. #ifdef TMC2130
  1793. //! @brief Show Belt Status
  1794. //!
  1795. //! @code{.unparsed}
  1796. //! |01234567890123456789|
  1797. //! | Belt status | c=18
  1798. //! | X: 000 |
  1799. //! | Y: 000 |
  1800. //! | |
  1801. //! ----------------------
  1802. //! @endcode
  1803. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1804. static void lcd_menu_belt_status()
  1805. {
  1806. lcd_home();
  1807. lcd_printf_P(PSTR("%S\n" " X %d\n" " Y %d"), _i("Belt status"), eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_X)), eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_Y)));
  1808. menu_back_if_clicked();
  1809. }
  1810. #endif //TMC2130
  1811. #ifdef RESUME_DEBUG
  1812. extern void stop_and_save_print_to_ram(float z_move, float e_move);
  1813. extern void restore_print_from_ram_and_continue(float e_move);
  1814. static void lcd_menu_test_save()
  1815. {
  1816. stop_and_save_print_to_ram(10, -0.8);
  1817. }
  1818. static void lcd_menu_test_restore()
  1819. {
  1820. restore_print_from_ram_and_continue(0.8);
  1821. }
  1822. #endif //RESUME_DEBUG
  1823. //! @brief Show Preheat Menu
  1824. static void lcd_preheat_menu()
  1825. {
  1826. eFilamentAction = FilamentAction::Preheat;
  1827. lcd_generic_preheat_menu();
  1828. }
  1829. //! @brief Show Support Menu
  1830. //!
  1831. //! @code{.unparsed}
  1832. //! |01234567890123456789|
  1833. //! | Main |
  1834. //! | Firmware: | c=18 r=1
  1835. //! | 3.7.2.-2363 | c=16 r=1
  1836. //! | prusa3d.com | MSG_PRUSA3D
  1837. //! | forum.prusa3d.com | MSG_PRUSA3D_FORUM
  1838. //! | howto.prusa3d.com | MSG_PRUSA3D_HOWTO
  1839. //! | -------------- | STR_SEPARATOR
  1840. //! | 1_75mm_MK3 | FILAMENT_SIZE
  1841. //! | howto.prusa3d.com | ELECTRONICS
  1842. //! | howto.prusa3d.com | NOZZLE_TYPE
  1843. //! | -------------- | STR_SEPARATOR
  1844. //! | Date: | c=17 r=1
  1845. //! | MMM DD YYYY | __DATE__
  1846. //! | -------------- | STR_SEPARATOR
  1847. //! @endcode
  1848. //!
  1849. //! If MMU is connected
  1850. //!
  1851. //! @code{.unparsed}
  1852. //! | MMU2 connected | c=18 r=1
  1853. //! | FW: 1.0.6-7064523 |
  1854. //! @endcode
  1855. //!
  1856. //! If MMU is not connected
  1857. //!
  1858. //! @code{.unparsed}
  1859. //! | MMU2 N/A | c=18 r=1
  1860. //! @endcode
  1861. //!
  1862. //! If Flash Air is connected
  1863. //!
  1864. //! @code{.unparsed}
  1865. //! | -------------- | STR_SEPARATOR
  1866. //! | FlashAir IP Addr: | c=18 r=1
  1867. //! | 192.168.1.100 |
  1868. //! @endcode
  1869. //!
  1870. //! @code{.unparsed}
  1871. //! | -------------- | STR_SEPARATOR
  1872. //! | XYZ cal. details | MSG_XYZ_DETAILS c=18
  1873. //! | Extruder info | MSG_INFO_EXTRUDER
  1874. //! | XYZ cal. details | MSG_INFO_SENSORS
  1875. //! @endcode
  1876. //!
  1877. //! If TMC2130 defined
  1878. //!
  1879. //! @code{.unparsed}
  1880. //! | Belt status | MSG_MENU_BELT_STATUS
  1881. //! @endcode
  1882. //!
  1883. //! @code{.unparsed}
  1884. //! | Temperatures | MSG_MENU_TEMPERATURES
  1885. //! @endcode
  1886. //!
  1887. //! If Voltage Bed and PWR Pin are defined
  1888. //!
  1889. //! @code{.unparsed}
  1890. //! | Voltages | MSG_MENU_VOLTAGES
  1891. //! @endcode
  1892. //!
  1893. //!
  1894. //! If DEBUG_BUILD is defined
  1895. //!
  1896. //! @code{.unparsed}
  1897. //! | Debug | c=18 r=1
  1898. //! @endcode
  1899. //! ----------------------
  1900. //! @endcode
  1901. static void lcd_support_menu()
  1902. {
  1903. typedef struct
  1904. { // 22bytes total
  1905. int8_t status; // 1byte
  1906. bool is_flash_air; // 1byte
  1907. uint8_t ip[4]; // 4bytes
  1908. char ip_str[3*4+3+1]; // 16bytes
  1909. } _menu_data_t;
  1910. static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
  1911. _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
  1912. if (_md->status == 0 || lcd_draw_update == 2)
  1913. {
  1914. // Menu was entered or SD card status has changed (plugged in or removed).
  1915. // Initialize its status.
  1916. _md->status = 1;
  1917. _md->is_flash_air = card.ToshibaFlashAir_isEnabled() && card.ToshibaFlashAir_GetIP(_md->ip);
  1918. if (_md->is_flash_air)
  1919. sprintf_P(_md->ip_str, PSTR("%d.%d.%d.%d"),
  1920. _md->ip[0], _md->ip[1],
  1921. _md->ip[2], _md->ip[3]);
  1922. } else if (_md->is_flash_air &&
  1923. _md->ip[0] == 0 && _md->ip[1] == 0 &&
  1924. _md->ip[2] == 0 && _md->ip[3] == 0 &&
  1925. ++ _md->status == 16)
  1926. {
  1927. // Waiting for the FlashAir card to get an IP address from a router. Force an update.
  1928. _md->status = 0;
  1929. }
  1930. MENU_BEGIN();
  1931. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  1932. MENU_ITEM_BACK_P(PSTR("Firmware:"));
  1933. MENU_ITEM_BACK_P(PSTR(" " FW_VERSION_FULL));
  1934. #if (FW_DEV_VERSION != FW_VERSION_GOLD) && (FW_DEV_VERSION != FW_VERSION_RC)
  1935. MENU_ITEM_BACK_P(PSTR(" repo " FW_REPOSITORY));
  1936. #endif
  1937. // Ideally this block would be optimized out by the compiler.
  1938. /* const uint8_t fw_string_len = strlen_P(FW_VERSION_STR_P());
  1939. if (fw_string_len < 6) {
  1940. MENU_ITEM_BACK_P(PSTR(MSG_FW_VERSION " - " FW_version));
  1941. } else {
  1942. MENU_ITEM_BACK_P(PSTR("FW - " FW_version));
  1943. }*/
  1944. MENU_ITEM_BACK_P(_i("prusa3d.com"));////MSG_PRUSA3D
  1945. MENU_ITEM_BACK_P(_i("forum.prusa3d.com"));////MSG_PRUSA3D_FORUM
  1946. MENU_ITEM_BACK_P(_i("howto.prusa3d.com"));////MSG_PRUSA3D_HOWTO
  1947. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1948. MENU_ITEM_BACK_P(PSTR(FILAMENT_SIZE));
  1949. MENU_ITEM_BACK_P(PSTR(ELECTRONICS));
  1950. MENU_ITEM_BACK_P(PSTR(NOZZLE_TYPE));
  1951. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1952. MENU_ITEM_BACK_P(_i("Date:"));////MSG_DATE c=17 r=1
  1953. MENU_ITEM_BACK_P(PSTR(__DATE__));
  1954. #ifdef IR_SENSOR_ANALOG
  1955. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1956. MENU_ITEM_BACK_P(PSTR("Fil. sensor v.:"));
  1957. MENU_ITEM_BACK_P(FsensorIRVersionText());
  1958. #endif // IR_SENSOR_ANALOG
  1959. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1960. if (mmu_enabled)
  1961. {
  1962. MENU_ITEM_BACK_P(_i("MMU2 connected")); ////c=18 r=1
  1963. MENU_ITEM_BACK_P(PSTR(" FW:")); ////c=17 r=1
  1964. if (((menu_item - 1) == menu_line) && lcd_draw_update)
  1965. {
  1966. lcd_set_cursor(6, menu_row);
  1967. if ((mmu_version > 0) && (mmu_buildnr > 0))
  1968. lcd_printf_P(PSTR("%d.%d.%d-%d"), mmu_version/100, mmu_version%100/10, mmu_version%10, mmu_buildnr);
  1969. else
  1970. lcd_puts_P(_i("unknown"));
  1971. }
  1972. }
  1973. else
  1974. MENU_ITEM_BACK_P(PSTR("MMU2 N/A"));
  1975. // Show the FlashAir IP address, if the card is available.
  1976. if (_md->is_flash_air) {
  1977. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1978. MENU_ITEM_BACK_P(PSTR("FlashAir IP Addr:")); //c=18 r=1
  1979. ///! MENU_ITEM(back_RAM, _md->ip_str, 0);
  1980. }
  1981. #ifndef MK1BP
  1982. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1983. MENU_ITEM_SUBMENU_P(_i("XYZ cal. details"), lcd_menu_xyz_y_min);////MSG_XYZ_DETAILS c=18
  1984. MENU_ITEM_SUBMENU_P(_i("Extruder info"), lcd_menu_extruder_info);////MSG_INFO_EXTRUDER c=18
  1985. MENU_ITEM_SUBMENU_P(_i("Sensor info"), lcd_menu_show_sensors_state);////MSG_INFO_SENSORS c=18 r=1
  1986. #ifdef TMC2130
  1987. MENU_ITEM_SUBMENU_P(_i("Belt status"), lcd_menu_belt_status);////MSG_MENU_BELT_STATUS c=18
  1988. #endif //TMC2130
  1989. MENU_ITEM_SUBMENU_P(_i("Temperatures"), lcd_menu_temperatures);////MSG_MENU_TEMPERATURES c=18 r=1
  1990. #if defined (VOLT_BED_PIN) || defined (VOLT_PWR_PIN)
  1991. MENU_ITEM_SUBMENU_P(_i("Voltages"), lcd_menu_voltages);////MSG_MENU_VOLTAGES c=18 r=1
  1992. #endif //defined VOLT_BED_PIN || defined VOLT_PWR_PIN
  1993. #ifdef DEBUG_BUILD
  1994. MENU_ITEM_SUBMENU_P(PSTR("Debug"), lcd_menu_debug);////c=18 r=1
  1995. #endif /* DEBUG_BUILD */
  1996. #endif //MK1BP
  1997. MENU_END();
  1998. }
  1999. void lcd_set_fan_check() {
  2000. fans_check_enabled = !fans_check_enabled;
  2001. eeprom_update_byte((unsigned char *)EEPROM_FAN_CHECK_ENABLED, fans_check_enabled);
  2002. #ifdef FANCHECK
  2003. if (fans_check_enabled == false) fan_check_error = EFCE_OK; //reset error if fanCheck is disabled during error. Allows resuming print.
  2004. #endif //FANCHECK
  2005. }
  2006. #ifdef MMU_HAS_CUTTER
  2007. void lcd_cutter_enabled()
  2008. {
  2009. if (EEPROM_MMU_CUTTER_ENABLED_enabled == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
  2010. {
  2011. #ifndef MMU_ALWAYS_CUT
  2012. eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, 0);
  2013. }
  2014. #else //MMU_ALWAYS_CUT
  2015. eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, EEPROM_MMU_CUTTER_ENABLED_always);
  2016. }
  2017. else if (EEPROM_MMU_CUTTER_ENABLED_always == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
  2018. {
  2019. eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, 0);
  2020. }
  2021. #endif //MMU_ALWAYS_CUT
  2022. else
  2023. {
  2024. eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, EEPROM_MMU_CUTTER_ENABLED_enabled);
  2025. }
  2026. }
  2027. #endif //MMU_HAS_CUTTER
  2028. void lcd_set_filament_autoload() {
  2029. fsensor_autoload_set(!fsensor_autoload_enabled);
  2030. }
  2031. #if defined(FILAMENT_SENSOR) && defined(PAT9125)
  2032. void lcd_set_filament_oq_meass()
  2033. {
  2034. fsensor_oq_meassure_set(!fsensor_oq_meassure_enabled);
  2035. }
  2036. #endif
  2037. FilamentAction eFilamentAction=FilamentAction::None; // must be initialized as 'non-autoLoad'
  2038. bool bFilamentFirstRun;
  2039. bool bFilamentPreheatState;
  2040. bool bFilamentAction=false;
  2041. static bool bFilamentWaitingFlag=false;
  2042. static void mFilamentPrompt()
  2043. {
  2044. uint8_t nLevel;
  2045. lcd_set_cursor(0,0);
  2046. lcdui_print_temp(LCD_STR_THERMOMETER[0],(int)degHotend(0),(int)degTargetHotend(0));
  2047. lcd_set_cursor(0,2);
  2048. lcd_puts_P(_i("Press the knob")); ////MSG_ c=20 r=1
  2049. lcd_set_cursor(0,3);
  2050. switch(eFilamentAction)
  2051. {
  2052. case FilamentAction::Load:
  2053. case FilamentAction::AutoLoad:
  2054. case FilamentAction::MmuLoad:
  2055. lcd_puts_P(_i("to load filament")); ////MSG_ c=20 r=1
  2056. break;
  2057. case FilamentAction::UnLoad:
  2058. case FilamentAction::MmuUnLoad:
  2059. lcd_puts_P(_i("to unload filament")); ////MSG_ c=20 r=1
  2060. break;
  2061. case FilamentAction::MmuEject:
  2062. case FilamentAction::MmuCut:
  2063. case FilamentAction::None:
  2064. case FilamentAction::Preheat:
  2065. case FilamentAction::Lay1Cal:
  2066. break;
  2067. }
  2068. if(lcd_clicked())
  2069. {
  2070. nLevel=2;
  2071. if(!bFilamentPreheatState)
  2072. {
  2073. nLevel++;
  2074. // setTargetHotend0(0.0); // uncoment if return to base-state is required
  2075. }
  2076. menu_back(nLevel);
  2077. switch(eFilamentAction)
  2078. {
  2079. case FilamentAction::AutoLoad:
  2080. eFilamentAction=FilamentAction::None; // i.e. non-autoLoad
  2081. // no break
  2082. case FilamentAction::Load:
  2083. loading_flag=true;
  2084. enquecommand_P(PSTR("M701")); // load filament
  2085. break;
  2086. case FilamentAction::UnLoad:
  2087. enquecommand_P(PSTR("M702")); // unload filament
  2088. break;
  2089. case FilamentAction::MmuLoad:
  2090. case FilamentAction::MmuUnLoad:
  2091. case FilamentAction::MmuEject:
  2092. case FilamentAction::MmuCut:
  2093. case FilamentAction::None:
  2094. case FilamentAction::Preheat:
  2095. case FilamentAction::Lay1Cal:
  2096. break;
  2097. }
  2098. }
  2099. }
  2100. void mFilamentItem(uint16_t nTemp, uint16_t nTempBed)
  2101. {
  2102. static int nTargetOld;
  2103. static int nTargetBedOld;
  2104. uint8_t nLevel;
  2105. nTargetOld = target_temperature[0];
  2106. nTargetBedOld = target_temperature_bed;
  2107. setTargetHotend0((float )nTemp);
  2108. setTargetBed((float) nTempBed);
  2109. {
  2110. const FilamentAction action = eFilamentAction;
  2111. if (action == FilamentAction::Preheat || action == FilamentAction::Lay1Cal)
  2112. {
  2113. lcd_return_to_status();
  2114. if (action == FilamentAction::Lay1Cal)
  2115. {
  2116. lcd_commands_type = LcdCommands::Layer1Cal;
  2117. }
  2118. else
  2119. {
  2120. raise_z_above(MIN_Z_FOR_PREHEAT);
  2121. if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE))
  2122. lcd_wizard(WizState::LoadFilHot);
  2123. }
  2124. return;
  2125. }
  2126. }
  2127. lcd_timeoutToStatus.stop();
  2128. if (current_temperature[0] > (target_temperature[0] * 0.95))
  2129. {
  2130. switch (eFilamentAction)
  2131. {
  2132. case FilamentAction::Load:
  2133. case FilamentAction::AutoLoad:
  2134. case FilamentAction::UnLoad:
  2135. if (bFilamentWaitingFlag) menu_submenu(mFilamentPrompt);
  2136. else
  2137. {
  2138. nLevel = bFilamentPreheatState ? 1 : 2;
  2139. menu_back(nLevel);
  2140. if ((eFilamentAction == FilamentAction::Load) || (eFilamentAction == FilamentAction::AutoLoad))
  2141. {
  2142. loading_flag = true;
  2143. enquecommand_P(PSTR("M701")); // load filament
  2144. if (eFilamentAction == FilamentAction::AutoLoad) eFilamentAction = FilamentAction::None; // i.e. non-autoLoad
  2145. }
  2146. if (eFilamentAction == FilamentAction::UnLoad)
  2147. enquecommand_P(PSTR("M702")); // unload filament
  2148. }
  2149. break;
  2150. case FilamentAction::MmuLoad:
  2151. nLevel = bFilamentPreheatState ? 1 : 2;
  2152. bFilamentAction = true;
  2153. menu_back(nLevel);
  2154. menu_submenu(mmu_load_to_nozzle_menu);
  2155. break;
  2156. case FilamentAction::MmuUnLoad:
  2157. nLevel = bFilamentPreheatState ? 1 : 2;
  2158. bFilamentAction = true;
  2159. menu_back(nLevel);
  2160. extr_unload();
  2161. break;
  2162. case FilamentAction::MmuEject:
  2163. nLevel = bFilamentPreheatState ? 1 : 2;
  2164. bFilamentAction = true;
  2165. menu_back(nLevel);
  2166. menu_submenu(mmu_fil_eject_menu);
  2167. break;
  2168. case FilamentAction::MmuCut:
  2169. #ifdef MMU_HAS_CUTTER
  2170. nLevel=bFilamentPreheatState?1:2;
  2171. bFilamentAction=true;
  2172. menu_back(nLevel);
  2173. menu_submenu(mmu_cut_filament_menu);
  2174. #endif //MMU_HAS_CUTTER
  2175. break;
  2176. case FilamentAction::None:
  2177. case FilamentAction::Preheat:
  2178. case FilamentAction::Lay1Cal:
  2179. break;
  2180. }
  2181. if (bFilamentWaitingFlag) Sound_MakeSound(e_SOUND_TYPE_StandardPrompt);
  2182. bFilamentWaitingFlag = false;
  2183. }
  2184. else
  2185. {
  2186. bFilamentWaitingFlag = true;
  2187. lcd_set_cursor(0, 0);
  2188. lcdui_print_temp(LCD_STR_THERMOMETER[0], (int) degHotend(0), (int) degTargetHotend(0));
  2189. lcd_set_cursor(0, 1);
  2190. switch (eFilamentAction)
  2191. {
  2192. case FilamentAction::Load:
  2193. case FilamentAction::AutoLoad:
  2194. case FilamentAction::MmuLoad:
  2195. lcd_puts_P(_i("Preheating to load")); ////MSG_ c=20
  2196. break;
  2197. case FilamentAction::UnLoad:
  2198. case FilamentAction::MmuUnLoad:
  2199. lcd_puts_P(_i("Preheating to unload")); ////MSG_ c=20
  2200. break;
  2201. case FilamentAction::MmuEject:
  2202. lcd_puts_P(_i("Preheating to eject")); ////MSG_ c=20
  2203. break;
  2204. case FilamentAction::MmuCut:
  2205. lcd_puts_P(_i("Preheating to cut")); ////MSG_ c=20
  2206. break;
  2207. case FilamentAction::None:
  2208. case FilamentAction::Preheat:
  2209. case FilamentAction::Lay1Cal:
  2210. break;
  2211. }
  2212. lcd_set_cursor(0, 3);
  2213. lcd_puts_P(_i(">Cancel")); ////MSG_ c=20 r=1
  2214. if (lcd_clicked())
  2215. {
  2216. bFilamentWaitingFlag = false;
  2217. if (!bFilamentPreheatState)
  2218. {
  2219. setTargetHotend0(0.0);
  2220. setTargetBed(0.0);
  2221. menu_back();
  2222. }
  2223. else
  2224. {
  2225. setTargetHotend0((float )nTargetOld);
  2226. setTargetBed((float) nTargetBedOld);
  2227. }
  2228. menu_back();
  2229. if (eFilamentAction == FilamentAction::AutoLoad) eFilamentAction = FilamentAction::None; // i.e. non-autoLoad
  2230. }
  2231. }
  2232. }
  2233. static void mFilamentItem_farm()
  2234. {
  2235. bFilamentPreheatState = false;
  2236. mFilamentItem(FARM_PREHEAT_HOTEND_TEMP, FARM_PREHEAT_HPB_TEMP);
  2237. }
  2238. static void mFilamentItem_farm_nozzle()
  2239. {
  2240. bFilamentPreheatState = false;
  2241. mFilamentItem(FARM_PREHEAT_HOTEND_TEMP, 0);
  2242. }
  2243. static void mFilamentItem_PLA()
  2244. {
  2245. bFilamentPreheatState = false;
  2246. mFilamentItem(PLA_PREHEAT_HOTEND_TEMP, PLA_PREHEAT_HPB_TEMP);
  2247. }
  2248. static void mFilamentItem_PET()
  2249. {
  2250. bFilamentPreheatState = false;
  2251. mFilamentItem(PET_PREHEAT_HOTEND_TEMP, PET_PREHEAT_HPB_TEMP);
  2252. }
  2253. static void mFilamentItem_ASA()
  2254. {
  2255. bFilamentPreheatState = false;
  2256. mFilamentItem(ASA_PREHEAT_HOTEND_TEMP, ASA_PREHEAT_HPB_TEMP);
  2257. }
  2258. static void mFilamentItem_PC()
  2259. {
  2260. bFilamentPreheatState = false;
  2261. mFilamentItem(PC_PREHEAT_HOTEND_TEMP, PC_PREHEAT_HPB_TEMP);
  2262. }
  2263. static void mFilamentItem_ABS()
  2264. {
  2265. bFilamentPreheatState = false;
  2266. mFilamentItem(ABS_PREHEAT_HOTEND_TEMP, ABS_PREHEAT_HPB_TEMP);
  2267. }
  2268. static void mFilamentItem_HIPS()
  2269. {
  2270. bFilamentPreheatState = false;
  2271. mFilamentItem(HIPS_PREHEAT_HOTEND_TEMP, HIPS_PREHEAT_HPB_TEMP);
  2272. }
  2273. static void mFilamentItem_PP()
  2274. {
  2275. bFilamentPreheatState = false;
  2276. mFilamentItem(PP_PREHEAT_HOTEND_TEMP, PP_PREHEAT_HPB_TEMP);
  2277. }
  2278. static void mFilamentItem_FLEX()
  2279. {
  2280. bFilamentPreheatState = false;
  2281. mFilamentItem(FLEX_PREHEAT_HOTEND_TEMP, FLEX_PREHEAT_HPB_TEMP);
  2282. }
  2283. void mFilamentBack()
  2284. {
  2285. menu_back();
  2286. if (eFilamentAction == FilamentAction::AutoLoad ||
  2287. eFilamentAction == FilamentAction::Preheat ||
  2288. eFilamentAction == FilamentAction::Lay1Cal)
  2289. {
  2290. eFilamentAction = FilamentAction::None; // i.e. non-autoLoad
  2291. }
  2292. }
  2293. void lcd_generic_preheat_menu()
  2294. {
  2295. MENU_BEGIN();
  2296. if (!eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE))
  2297. {
  2298. if (eFilamentAction == FilamentAction::Lay1Cal)
  2299. {
  2300. MENU_ITEM_FUNCTION_P(_T(MSG_BACK), mFilamentBack);
  2301. }
  2302. else
  2303. {
  2304. MENU_ITEM_FUNCTION_P(_T(MSG_MAIN), mFilamentBack);
  2305. }
  2306. }
  2307. if (farm_mode)
  2308. {
  2309. MENU_ITEM_FUNCTION_P(PSTR("farm - " STRINGIFY(FARM_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(FARM_PREHEAT_HPB_TEMP)), mFilamentItem_farm);
  2310. MENU_ITEM_FUNCTION_P(PSTR("nozzle - " STRINGIFY(FARM_PREHEAT_HOTEND_TEMP) "/0"), mFilamentItem_farm_nozzle);
  2311. }
  2312. else
  2313. {
  2314. MENU_ITEM_SUBMENU_P(PSTR("PLA - " STRINGIFY(PLA_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PLA_PREHEAT_HPB_TEMP)),mFilamentItem_PLA);
  2315. MENU_ITEM_SUBMENU_P(PSTR("PET - " STRINGIFY(PET_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PET_PREHEAT_HPB_TEMP)),mFilamentItem_PET);
  2316. MENU_ITEM_SUBMENU_P(PSTR("ASA - " STRINGIFY(ASA_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ASA_PREHEAT_HPB_TEMP)),mFilamentItem_ASA);
  2317. MENU_ITEM_SUBMENU_P(PSTR("PC - " STRINGIFY(PC_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PC_PREHEAT_HPB_TEMP)),mFilamentItem_PC);
  2318. MENU_ITEM_SUBMENU_P(PSTR("ABS - " STRINGIFY(ABS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ABS_PREHEAT_HPB_TEMP)),mFilamentItem_ABS);
  2319. MENU_ITEM_SUBMENU_P(PSTR("HIPS - " STRINGIFY(HIPS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(HIPS_PREHEAT_HPB_TEMP)),mFilamentItem_HIPS);
  2320. MENU_ITEM_SUBMENU_P(PSTR("PP - " STRINGIFY(PP_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PP_PREHEAT_HPB_TEMP)),mFilamentItem_PP);
  2321. MENU_ITEM_SUBMENU_P(PSTR("FLEX - " STRINGIFY(FLEX_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(FLEX_PREHEAT_HPB_TEMP)),mFilamentItem_FLEX);
  2322. }
  2323. if (!eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) && eFilamentAction == FilamentAction::Preheat) MENU_ITEM_FUNCTION_P(_T(MSG_COOLDOWN), lcd_cooldown);
  2324. MENU_END();
  2325. }
  2326. void mFilamentItemForce()
  2327. {
  2328. mFilamentItem(target_temperature[0],target_temperature_bed);
  2329. }
  2330. void lcd_unLoadFilament()
  2331. {
  2332. eFilamentAction=FilamentAction::UnLoad;
  2333. preheat_or_continue();
  2334. }
  2335. static void mmu_unload_filament()
  2336. {
  2337. eFilamentAction = FilamentAction::MmuUnLoad;
  2338. preheat_or_continue();
  2339. }
  2340. void lcd_wait_interact() {
  2341. lcd_clear();
  2342. lcd_set_cursor(0, 1);
  2343. #ifdef SNMM
  2344. lcd_puts_P(_i("Prepare new filament"));////MSG_PREPARE_FILAMENT c=20 r=1
  2345. #else
  2346. lcd_puts_P(_i("Insert filament"));////MSG_INSERT_FILAMENT c=20
  2347. #endif
  2348. if (!fsensor_autoload_enabled) {
  2349. lcd_set_cursor(0, 2);
  2350. lcd_puts_P(_i("and press the knob"));////MSG_PRESS c=20 r=2
  2351. }
  2352. }
  2353. void lcd_change_success() {
  2354. lcd_clear();
  2355. lcd_set_cursor(0, 2);
  2356. lcd_puts_P(_i("Change success!"));////MSG_CHANGE_SUCCESS
  2357. }
  2358. static void lcd_loading_progress_bar(uint16_t loading_time_ms) {
  2359. for (uint_least8_t i = 0; i < 20; i++) {
  2360. lcd_set_cursor(i, 3);
  2361. lcd_print(".");
  2362. //loading_time_ms/20 delay
  2363. for (uint_least8_t j = 0; j < 5; j++) {
  2364. delay_keep_alive(loading_time_ms / 100);
  2365. }
  2366. }
  2367. }
  2368. void lcd_loading_color() {
  2369. //we are extruding 25mm with feedrate 200mm/min -> 7.5 seconds for whole action, 0.375 s for one character
  2370. lcd_clear();
  2371. lcd_set_cursor(0, 0);
  2372. lcd_puts_P(_i("Loading color"));////MSG_LOADING_COLOR
  2373. lcd_set_cursor(0, 2);
  2374. lcd_puts_P(_T(MSG_PLEASE_WAIT));
  2375. lcd_loading_progress_bar((FILAMENTCHANGE_FINALFEED * 1000ul) / FILAMENTCHANGE_EFEED_FINAL); //show progress bar during filament loading slow sequence
  2376. }
  2377. void lcd_loading_filament() {
  2378. lcd_clear();
  2379. lcd_set_cursor(0, 0);
  2380. lcd_puts_P(_T(MSG_LOADING_FILAMENT));
  2381. lcd_set_cursor(0, 2);
  2382. lcd_puts_P(_T(MSG_PLEASE_WAIT));
  2383. #ifdef SNMM
  2384. for (int i = 0; i < 20; i++) {
  2385. lcd_set_cursor(i, 3);
  2386. lcd_print(".");
  2387. for (int j = 0; j < 10 ; j++) {
  2388. manage_heater();
  2389. manage_inactivity(true);
  2390. _delay(153);
  2391. }
  2392. }
  2393. #else //SNMM
  2394. uint16_t slow_seq_time = (FILAMENTCHANGE_FINALFEED * 1000ul) / FILAMENTCHANGE_EFEED_FINAL;
  2395. uint16_t fast_seq_time = (FILAMENTCHANGE_FIRSTFEED * 1000ul) / FILAMENTCHANGE_EFEED_FIRST;
  2396. lcd_loading_progress_bar(slow_seq_time + fast_seq_time); //show progress bar for total time of filament loading fast + slow sequence
  2397. #endif //SNMM
  2398. }
  2399. void lcd_alright() {
  2400. int enc_dif = 0;
  2401. int cursor_pos = 1;
  2402. lcd_clear();
  2403. lcd_set_cursor(0, 0);
  2404. lcd_puts_P(_i("Changed correctly?"));////MSG_CORRECTLY c=20
  2405. lcd_set_cursor(1, 1);
  2406. lcd_puts_P(_T(MSG_YES));
  2407. lcd_set_cursor(1, 2);
  2408. lcd_puts_P(_i("Filament not loaded"));////MSG_NOT_LOADED c=19
  2409. lcd_set_cursor(1, 3);
  2410. lcd_puts_P(_i("Color not correct"));////MSG_NOT_COLOR
  2411. lcd_set_cursor(0, 1);
  2412. lcd_print(">");
  2413. enc_dif = lcd_encoder_diff;
  2414. lcd_consume_click();
  2415. while (lcd_change_fil_state == 0) {
  2416. manage_heater();
  2417. manage_inactivity(true);
  2418. if ( abs((enc_dif - lcd_encoder_diff)) > 4 ) {
  2419. if ( (abs(enc_dif - lcd_encoder_diff)) > 1 ) {
  2420. if (enc_dif > lcd_encoder_diff ) {
  2421. cursor_pos --;
  2422. }
  2423. if (enc_dif < lcd_encoder_diff ) {
  2424. cursor_pos ++;
  2425. }
  2426. if (cursor_pos > 3) {
  2427. cursor_pos = 3;
  2428. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  2429. }
  2430. if (cursor_pos < 1) {
  2431. cursor_pos = 1;
  2432. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  2433. }
  2434. lcd_set_cursor(0, 1);
  2435. lcd_print(" ");
  2436. lcd_set_cursor(0, 2);
  2437. lcd_print(" ");
  2438. lcd_set_cursor(0, 3);
  2439. lcd_print(" ");
  2440. lcd_set_cursor(0, cursor_pos);
  2441. lcd_print(">");
  2442. enc_dif = lcd_encoder_diff;
  2443. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  2444. _delay(100);
  2445. }
  2446. }
  2447. if (lcd_clicked()) {
  2448. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  2449. lcd_change_fil_state = cursor_pos;
  2450. _delay(500);
  2451. }
  2452. };
  2453. lcd_clear();
  2454. lcd_return_to_status();
  2455. }
  2456. void show_preheat_nozzle_warning()
  2457. {
  2458. lcd_clear();
  2459. lcd_set_cursor(0, 0);
  2460. lcd_puts_P(_T(MSG_ERROR));
  2461. lcd_set_cursor(0, 2);
  2462. lcd_puts_P(_T(MSG_PREHEAT_NOZZLE));
  2463. _delay(2000);
  2464. lcd_clear();
  2465. }
  2466. void lcd_load_filament_color_check()
  2467. {
  2468. bool clean = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_CLEAN), false, true);
  2469. while (!clean) {
  2470. lcd_update_enable(true);
  2471. lcd_update(2);
  2472. load_filament_final_feed();
  2473. st_synchronize();
  2474. clean = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_CLEAN), false, true);
  2475. }
  2476. }
  2477. #ifdef FILAMENT_SENSOR
  2478. static void lcd_menu_AutoLoadFilament()
  2479. {
  2480. uint8_t nlines;
  2481. lcd_display_message_fullscreen_nonBlocking_P(_i("Autoloading filament is active, just press the knob and insert filament..."),nlines);////MSG_AUTOLOADING_ENABLED c=20 r=4
  2482. menu_back_if_clicked();
  2483. }
  2484. #endif //FILAMENT_SENSOR
  2485. static void preheat_or_continue()
  2486. {
  2487. bFilamentFirstRun = false;
  2488. if (target_temperature[0] >= EXTRUDE_MINTEMP)
  2489. {
  2490. bFilamentPreheatState = true;
  2491. mFilamentItem(target_temperature[0], target_temperature_bed);
  2492. }
  2493. else lcd_generic_preheat_menu();
  2494. }
  2495. static void lcd_LoadFilament()
  2496. {
  2497. eFilamentAction = FilamentAction::Load;
  2498. preheat_or_continue();
  2499. }
  2500. //! @brief Show filament used a print time
  2501. //!
  2502. //! If printing current print statistics are shown
  2503. //!
  2504. //! @code{.unparsed}
  2505. //! |01234567890123456789|
  2506. //! |Filament used: | c=19
  2507. //! | 0000.00m |
  2508. //! |Print time: | c=19 r=1
  2509. //! | 00h 00m 00s |
  2510. //! ----------------------
  2511. //! @endcode
  2512. //!
  2513. //! If not printing, total statistics are shown
  2514. //!
  2515. //! @code{.unparsed}
  2516. //! |01234567890123456789|
  2517. //! |Total filament: | c=19 r=1
  2518. //! | 0000.00m |
  2519. //! |Total print time: | c=19 r=1
  2520. //! | 00d 00h 00m |
  2521. //! ----------------------
  2522. //! @endcode
  2523. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. Translations missing for "d"days, "h"ours, "m"inutes", "s"seconds".
  2524. void lcd_menu_statistics()
  2525. {
  2526. lcd_timeoutToStatus.stop(); //infinite timeout
  2527. if (IS_SD_PRINTING)
  2528. {
  2529. const float _met = ((float)total_filament_used) / (100000.f);
  2530. const uint32_t _t = (_millis() - starttime) / 1000ul;
  2531. const uint32_t _h = _t / 3600;
  2532. const uint8_t _m = (_t - (_h * 3600ul)) / 60ul;
  2533. const uint8_t _s = _t - ((_h * 3600ul) + (_m * 60ul));
  2534. lcd_home();
  2535. lcd_printf_P(_N(
  2536. "%S:\n"
  2537. "%18.2fm \n"
  2538. "%S:\n"
  2539. "%10ldh %02hhdm %02hhds"
  2540. ),
  2541. _i("Filament used"), _met, ////c=19
  2542. _i("Print time"), _h, _m, _s); ////c=19 r=1
  2543. menu_back_if_clicked_fb();
  2544. }
  2545. else
  2546. {
  2547. unsigned long _filament = eeprom_read_dword((uint32_t *)EEPROM_FILAMENTUSED);
  2548. unsigned long _time = eeprom_read_dword((uint32_t *)EEPROM_TOTALTIME); //in minutes
  2549. uint8_t _hours, _minutes;
  2550. uint32_t _days;
  2551. float _filament_m = (float)_filament/100;
  2552. _days = _time / 1440;
  2553. _hours = (_time - (_days * 1440)) / 60;
  2554. _minutes = _time - ((_days * 1440) + (_hours * 60));
  2555. lcd_home();
  2556. lcd_printf_P(_N(
  2557. "%S:\n"
  2558. "%18.2fm \n"
  2559. "%S:\n"
  2560. "%10ldd %02hhdh %02hhdm"
  2561. ),
  2562. _i("Total filament"), _filament_m, ////c=19 r=1
  2563. _i("Total print time"), _days, _hours, _minutes); ////c=19 r=1
  2564. menu_back_if_clicked_fb();
  2565. }
  2566. }
  2567. static void _lcd_move(const char *name, int axis, int min, int max)
  2568. {
  2569. typedef struct
  2570. { // 2bytes total
  2571. bool initialized; // 1byte
  2572. bool endstopsEnabledPrevious; // 1byte
  2573. } _menu_data_t;
  2574. static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
  2575. _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
  2576. if (!_md->initialized)
  2577. {
  2578. _md->endstopsEnabledPrevious = enable_endstops(false);
  2579. _md->initialized = true;
  2580. }
  2581. if (lcd_encoder != 0)
  2582. {
  2583. refresh_cmd_timeout();
  2584. if (! planner_queue_full())
  2585. {
  2586. current_position[axis] += float((int)lcd_encoder) * move_menu_scale;
  2587. if (min_software_endstops && current_position[axis] < min) current_position[axis] = min;
  2588. if (max_software_endstops && current_position[axis] > max) current_position[axis] = max;
  2589. lcd_encoder = 0;
  2590. world2machine_clamp(current_position[X_AXIS], current_position[Y_AXIS]);
  2591. plan_buffer_line_curposXYZE(manual_feedrate[axis] / 60);
  2592. lcd_draw_update = 1;
  2593. }
  2594. }
  2595. if (lcd_draw_update)
  2596. {
  2597. lcd_set_cursor(0, 1);
  2598. menu_draw_float31(name, current_position[axis]);
  2599. }
  2600. if (menu_leaving || LCD_CLICKED) (void)enable_endstops(_md->endstopsEnabledPrevious);
  2601. if (LCD_CLICKED) menu_back();
  2602. }
  2603. static void lcd_move_e()
  2604. {
  2605. if (degHotend0() > EXTRUDE_MINTEMP)
  2606. {
  2607. if (lcd_encoder != 0)
  2608. {
  2609. refresh_cmd_timeout();
  2610. if (! planner_queue_full())
  2611. {
  2612. current_position[E_AXIS] += float((int)lcd_encoder) * move_menu_scale;
  2613. lcd_encoder = 0;
  2614. plan_buffer_line_curposXYZE(manual_feedrate[E_AXIS] / 60);
  2615. lcd_draw_update = 1;
  2616. }
  2617. }
  2618. if (lcd_draw_update)
  2619. {
  2620. lcd_set_cursor(0, 1);
  2621. // Note: the colon behind the text is necessary to greatly shorten
  2622. // the implementation of menu_draw_float31
  2623. menu_draw_float31(PSTR("Extruder:"), current_position[E_AXIS]);
  2624. }
  2625. if (LCD_CLICKED) menu_back();
  2626. }
  2627. else
  2628. {
  2629. show_preheat_nozzle_warning();
  2630. lcd_return_to_status();
  2631. }
  2632. }
  2633. //! @brief Show measured Y distance of front calibration points from Y_MIN_POS
  2634. //! If those points are detected too close to edge of reachable area, their confidence is lowered.
  2635. //! This functionality is applied more often for MK2 printers.
  2636. //! @code{.unparsed}
  2637. //! |01234567890123456789|
  2638. //! |Y distance from min | c=19 r=1
  2639. //! | -------------- | STR_SEPARATOR
  2640. //! |Left: 00.00mm | c=11 r=1
  2641. //! |Right: 00.00mm | c=11 r=1
  2642. //! ----------------------
  2643. //! @endcode
  2644. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  2645. static void lcd_menu_xyz_y_min()
  2646. {
  2647. float distanceMin[2];
  2648. count_xyz_details(distanceMin);
  2649. lcd_home();
  2650. lcd_printf_P(_N(
  2651. "%S:\n"
  2652. "%S\n"
  2653. "%S:\n"
  2654. "%S:"
  2655. ),
  2656. _i("Y distance from min"), ////c=19 r=1
  2657. separator,
  2658. _i("Left"), ////c=11 r=1
  2659. _i("Right") ////c=11 r=1
  2660. );
  2661. for (uint8_t i = 0; i < 2; i++)
  2662. {
  2663. lcd_set_cursor(11,2+i);
  2664. if (distanceMin[i] >= 200) lcd_puts_P(_T(MSG_NA)); ////c=3 r=1
  2665. else lcd_printf_P(_N("%6.2fmm"), distanceMin[i]);
  2666. }
  2667. if (lcd_clicked())
  2668. menu_goto(lcd_menu_xyz_skew, 0, true, true);
  2669. }
  2670. //@brief Show measured axis skewness
  2671. float _deg(float rad)
  2672. {
  2673. return rad * 180 / M_PI;
  2674. }
  2675. //! @brief Show Measured XYZ Skew
  2676. //!
  2677. //! @code{.unparsed}
  2678. //! |01234567890123456789|
  2679. //! |Measured skew: 0.00D| c=13 r=1
  2680. //! | -------------- | STR_SEPARATOR
  2681. //! |Slight skew: 0.12D| c=13 r=1 c=4 r=1
  2682. //! |Severe skew: 0.25D| c=13 r=1 c=4 r=1
  2683. //! ----------------------
  2684. //! D - Degree sysmbol LCD_STR_DEGREE
  2685. //! @endcode
  2686. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  2687. static void lcd_menu_xyz_skew()
  2688. {
  2689. float angleDiff = eeprom_read_float((float*)(EEPROM_XYZ_CAL_SKEW));
  2690. lcd_home();
  2691. lcd_printf_P(_N(
  2692. "%S:\n"
  2693. "%S\n"
  2694. "%-15.15S%3.2f\x01\n"
  2695. "%-15.15S%3.2f\x01"
  2696. ),
  2697. _i("Measured skew"), ////c=13 r=1
  2698. separator,
  2699. _i("Slight skew:"), _deg(bed_skew_angle_mild), ////c=13 r=1 c=4 r=1
  2700. _i("Severe skew:"), _deg(bed_skew_angle_extreme) ////c=13 r=1 c=4 r=1
  2701. );
  2702. if (angleDiff < 100){
  2703. lcd_set_cursor(15,0);
  2704. lcd_printf_P(_N("%3.2f\x01"), _deg(angleDiff));
  2705. }
  2706. else{
  2707. lcd_set_cursor(15,0);
  2708. lcd_puts_P(_T(MSG_NA));
  2709. }
  2710. if (lcd_clicked())
  2711. menu_goto(lcd_menu_xyz_offset, 0, true, true);
  2712. }
  2713. //! @brief Show measured bed offset from expected position
  2714. //!
  2715. //! @code{.unparsed}
  2716. //! |01234567890123456789|
  2717. //! |[0;0] point offset | c=20 r=1
  2718. //! | -------------- | STR_SEPARATOR
  2719. //! |X: 000.00mm| c=10 r=1
  2720. //! |Y: 000.00mm| c=10 r=1
  2721. //! ----------------------
  2722. //! @endcode
  2723. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  2724. static void lcd_menu_xyz_offset()
  2725. {
  2726. lcd_set_cursor(0,0);
  2727. lcd_puts_P(_i("[0;0] point offset"));////MSG_MEASURED_OFFSET
  2728. lcd_puts_at_P(0, 1, separator);
  2729. lcd_puts_at_P(0, 2, PSTR("X")); ////c=10 r=1
  2730. lcd_puts_at_P(0, 3, PSTR("Y")); ////c=10 r=1
  2731. float vec_x[2];
  2732. float vec_y[2];
  2733. float cntr[2];
  2734. world2machine_read_valid(vec_x, vec_y, cntr);
  2735. for (uint_least8_t i = 0; i < 2; i++)
  2736. {
  2737. lcd_set_cursor((cntr[i] < 0) ? 10 : 11, i+2);
  2738. lcd_print(cntr[i]);
  2739. lcd_puts_at_P(16, i + 2, PSTR("mm"));
  2740. }
  2741. menu_back_if_clicked();
  2742. }
  2743. // Save a single axis babystep value.
  2744. void EEPROM_save_B(int pos, int* value)
  2745. {
  2746. eeprom_update_byte((unsigned char*)pos, (unsigned char)((*value) & 0xff));
  2747. eeprom_update_byte((unsigned char*)pos + 1, (unsigned char)((*value) >> 8));
  2748. }
  2749. // Read a single axis babystep value.
  2750. void EEPROM_read_B(int pos, int* value)
  2751. {
  2752. *value = (int)eeprom_read_byte((unsigned char*)pos) | (int)(eeprom_read_byte((unsigned char*)pos + 1) << 8);
  2753. }
  2754. // Note: the colon behind the text (X, Y, Z) is necessary to greatly shorten
  2755. // the implementation of menu_draw_float31
  2756. static void lcd_move_x() {
  2757. _lcd_move(PSTR("X:"), X_AXIS, X_MIN_POS, X_MAX_POS);
  2758. }
  2759. static void lcd_move_y() {
  2760. _lcd_move(PSTR("Y:"), Y_AXIS, Y_MIN_POS, Y_MAX_POS);
  2761. }
  2762. static void lcd_move_z() {
  2763. _lcd_move(PSTR("Z:"), Z_AXIS, Z_MIN_POS, Z_MAX_POS);
  2764. }
  2765. /**
  2766. * @brief Adjust first layer offset from bed if axis is Z_AXIS
  2767. *
  2768. * If menu is left (button pushed or timed out), value is stored to EEPROM and
  2769. * if the axis is Z_AXIS, CALIBRATION_STATUS_CALIBRATED is also stored.
  2770. * Purpose of this function for other axis then Z is unknown.
  2771. *
  2772. * @param axis AxisEnum X_AXIS Y_AXIS Z_AXIS
  2773. * other value leads to storing Z_AXIS
  2774. * @param msg text to be displayed
  2775. */
  2776. static void lcd_babystep_z()
  2777. {
  2778. typedef struct
  2779. {
  2780. int8_t status;
  2781. int16_t babystepMemZ;
  2782. float babystepMemMMZ;
  2783. } _menu_data_t;
  2784. static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
  2785. _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
  2786. if (_md->status == 0)
  2787. {
  2788. // Menu was entered.
  2789. // Initialize its status.
  2790. _md->status = 1;
  2791. check_babystep();
  2792. if(!eeprom_is_sheet_initialized(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))){
  2793. _md->babystepMemZ = 0;
  2794. }
  2795. else{
  2796. _md->babystepMemZ = eeprom_read_word(reinterpret_cast<uint16_t *>(&(EEPROM_Sheets_base->
  2797. s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset)));
  2798. }
  2799. // same logic as in babystep_load
  2800. if (calibration_status() >= CALIBRATION_STATUS_LIVE_ADJUST)
  2801. _md->babystepMemZ = 0;
  2802. _md->babystepMemMMZ = _md->babystepMemZ/cs.axis_steps_per_unit[Z_AXIS];
  2803. lcd_draw_update = 1;
  2804. //SERIAL_ECHO("Z baby step: ");
  2805. //SERIAL_ECHO(_md->babystepMem[2]);
  2806. // Wait 90 seconds before closing the live adjust dialog.
  2807. lcd_timeoutToStatus.start();
  2808. }
  2809. if (lcd_encoder != 0)
  2810. {
  2811. if (homing_flag) lcd_encoder = 0;
  2812. _md->babystepMemZ += (int)lcd_encoder;
  2813. if (_md->babystepMemZ < Z_BABYSTEP_MIN) _md->babystepMemZ = Z_BABYSTEP_MIN; //-3999 -> -9.99 mm
  2814. else if (_md->babystepMemZ > Z_BABYSTEP_MAX) _md->babystepMemZ = Z_BABYSTEP_MAX; //0
  2815. else
  2816. {
  2817. CRITICAL_SECTION_START
  2818. babystepsTodo[Z_AXIS] += (int)lcd_encoder;
  2819. CRITICAL_SECTION_END
  2820. }
  2821. _md->babystepMemMMZ = _md->babystepMemZ/cs.axis_steps_per_unit[Z_AXIS];
  2822. _delay(50);
  2823. lcd_encoder = 0;
  2824. lcd_draw_update = 1;
  2825. }
  2826. if (lcd_draw_update)
  2827. {
  2828. SheetFormatBuffer buffer;
  2829. menu_format_sheet_E(EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))], buffer);
  2830. lcd_set_cursor(0, 0);
  2831. lcd_print(buffer.c);
  2832. lcd_set_cursor(0, 1);
  2833. menu_draw_float13(_i("Adjusting Z:"), _md->babystepMemMMZ); ////MSG_BABYSTEPPING_Z c=15 Beware: must include the ':' as its last character
  2834. }
  2835. if (LCD_CLICKED || menu_leaving)
  2836. {
  2837. // Only update the EEPROM when leaving the menu.
  2838. uint8_t active_sheet=eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet));
  2839. eeprom_update_word(reinterpret_cast<uint16_t *>(&(EEPROM_Sheets_base->s[active_sheet].z_offset)),_md->babystepMemZ);
  2840. eeprom_update_byte(&(EEPROM_Sheets_base->s[active_sheet].bed_temp),target_temperature_bed);
  2841. #ifdef PINDA_THERMISTOR
  2842. eeprom_update_byte(&(EEPROM_Sheets_base->s[active_sheet].pinda_temp),current_temperature_pinda);
  2843. #endif //PINDA_THERMISTOR
  2844. calibration_status_store(CALIBRATION_STATUS_CALIBRATED);
  2845. }
  2846. if (LCD_CLICKED) menu_back();
  2847. }
  2848. typedef struct
  2849. { // 12bytes + 9bytes = 21bytes total
  2850. menu_data_edit_t reserved; //12 bytes reserved for number editing functions
  2851. int8_t status; // 1byte
  2852. int16_t left; // 2byte
  2853. int16_t right; // 2byte
  2854. int16_t front; // 2byte
  2855. int16_t rear; // 2byte
  2856. } _menu_data_adjust_bed_t;
  2857. static_assert(sizeof(menu_data)>= sizeof(_menu_data_adjust_bed_t),"_menu_data_adjust_bed_t doesn't fit into menu_data");
  2858. void lcd_adjust_bed_reset(void)
  2859. {
  2860. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID, 1);
  2861. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_LEFT , 0);
  2862. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_RIGHT, 0);
  2863. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_FRONT, 0);
  2864. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_REAR , 0);
  2865. _menu_data_adjust_bed_t* _md = (_menu_data_adjust_bed_t*)&(menu_data[0]);
  2866. _md->status = 0;
  2867. }
  2868. //! @brief Show Bed level correct
  2869. //!
  2870. //! @code{.unparsed}
  2871. //! |01234567890123456789|
  2872. //! |Settings: | MSG_SETTINGS
  2873. //! |Left side [um]: | MSG_BED_CORRECTION_LEFT
  2874. //! |Right side[um]: | MSG_BED_CORRECTION_RIGHT
  2875. //! |Front side[um]: | MSG_BED_CORRECTION_FRONT
  2876. //! |Rear side [um]: | MSG_BED_CORRECTION_REAR
  2877. //! |Reset | MSG_BED_CORRECTION_RESET
  2878. //! ----------------------
  2879. //! @endcode
  2880. void lcd_adjust_bed(void)
  2881. {
  2882. _menu_data_adjust_bed_t* _md = (_menu_data_adjust_bed_t*)&(menu_data[0]);
  2883. if (_md->status == 0)
  2884. {
  2885. // Menu was entered.
  2886. _md->left = 0;
  2887. _md->right = 0;
  2888. _md->front = 0;
  2889. _md->rear = 0;
  2890. if (eeprom_read_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID) == 1)
  2891. {
  2892. _md->left = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_LEFT);
  2893. _md->right = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_RIGHT);
  2894. _md->front = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_FRONT);
  2895. _md->rear = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_REAR);
  2896. }
  2897. _md->status = 1;
  2898. }
  2899. MENU_BEGIN();
  2900. // leaving menu - this condition must be immediately before MENU_ITEM_BACK_P
  2901. ON_MENU_LEAVE(
  2902. eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_LEFT, _md->left);
  2903. eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_RIGHT, _md->right);
  2904. eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_FRONT, _md->front);
  2905. eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_REAR, _md->rear);
  2906. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID, 1);
  2907. );
  2908. MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
  2909. MENU_ITEM_EDIT_int3_P(_i("Left side [um]"), &_md->left, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_LEFT c=14 r=1
  2910. MENU_ITEM_EDIT_int3_P(_i("Right side[um]"), &_md->right, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_RIGHT c=14 r=1
  2911. MENU_ITEM_EDIT_int3_P(_i("Front side[um]"), &_md->front, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_FRONT c=14 r=1
  2912. MENU_ITEM_EDIT_int3_P(_i("Rear side [um]"), &_md->rear, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_REAR c=14 r=1
  2913. MENU_ITEM_FUNCTION_P(_i("Reset"), lcd_adjust_bed_reset);////MSG_BED_CORRECTION_RESET
  2914. MENU_END();
  2915. }
  2916. //! @brief Show PID Extruder
  2917. //!
  2918. //! @code{.unparsed}
  2919. //! |01234567890123456789|
  2920. //! | Set temperature: | MSG_SET_TEMPERATURE
  2921. //! | |
  2922. //! | 210 |
  2923. //! | |
  2924. //! ----------------------
  2925. //! @endcode
  2926. void pid_extruder()
  2927. {
  2928. lcd_clear();
  2929. lcd_set_cursor(1, 0);
  2930. lcd_puts_P(_i("Set temperature:"));////MSG_SET_TEMPERATURE c=19 r=1
  2931. pid_temp += int(lcd_encoder);
  2932. if (pid_temp > HEATER_0_MAXTEMP) pid_temp = HEATER_0_MAXTEMP;
  2933. if (pid_temp < HEATER_0_MINTEMP) pid_temp = HEATER_0_MINTEMP;
  2934. lcd_encoder = 0;
  2935. lcd_set_cursor(1, 2);
  2936. lcd_print(ftostr3(pid_temp));
  2937. if (lcd_clicked()) {
  2938. lcd_commands_type = LcdCommands::PidExtruder;
  2939. lcd_return_to_status();
  2940. lcd_update(2);
  2941. }
  2942. }
  2943. /*
  2944. void lcd_adjust_z() {
  2945. int enc_dif = 0;
  2946. int cursor_pos = 1;
  2947. int fsm = 0;
  2948. lcd_clear();
  2949. lcd_set_cursor(0, 0);
  2950. lcd_puts_P(_i("Auto adjust Z?"));////MSG_ADJUSTZ
  2951. lcd_set_cursor(1, 1);
  2952. lcd_puts_P(_T(MSG_YES));
  2953. lcd_set_cursor(1, 2);
  2954. lcd_puts_P(_T(MSG_NO));
  2955. lcd_set_cursor(0, 1);
  2956. lcd_print(">");
  2957. enc_dif = lcd_encoder_diff;
  2958. while (fsm == 0) {
  2959. manage_heater();
  2960. manage_inactivity(true);
  2961. if ( abs((enc_dif - lcd_encoder_diff)) > 4 ) {
  2962. if ( (abs(enc_dif - lcd_encoder_diff)) > 1 ) {
  2963. if (enc_dif > lcd_encoder_diff ) {
  2964. cursor_pos --;
  2965. }
  2966. if (enc_dif < lcd_encoder_diff ) {
  2967. cursor_pos ++;
  2968. }
  2969. if (cursor_pos > 2) {
  2970. cursor_pos = 2;
  2971. }
  2972. if (cursor_pos < 1) {
  2973. cursor_pos = 1;
  2974. }
  2975. lcd_set_cursor(0, 1);
  2976. lcd_print(" ");
  2977. lcd_set_cursor(0, 2);
  2978. lcd_print(" ");
  2979. lcd_set_cursor(0, cursor_pos);
  2980. lcd_print(">");
  2981. enc_dif = lcd_encoder_diff;
  2982. _delay(100);
  2983. }
  2984. }
  2985. if (lcd_clicked()) {
  2986. fsm = cursor_pos;
  2987. if (fsm == 1) {
  2988. int babystepLoadZ = 0;
  2989. EEPROM_read_B(EEPROM_BABYSTEP_Z, &babystepLoadZ);
  2990. CRITICAL_SECTION_START
  2991. babystepsTodo[Z_AXIS] = babystepLoadZ;
  2992. CRITICAL_SECTION_END
  2993. } else {
  2994. int zero = 0;
  2995. EEPROM_save_B(EEPROM_BABYSTEP_X, &zero);
  2996. EEPROM_save_B(EEPROM_BABYSTEP_Y, &zero);
  2997. EEPROM_save_B(EEPROM_BABYSTEP_Z, &zero);
  2998. }
  2999. _delay(500);
  3000. }
  3001. };
  3002. lcd_clear();
  3003. lcd_return_to_status();
  3004. }*/
  3005. #ifdef PINDA_THERMISTOR
  3006. bool lcd_wait_for_pinda(float temp) {
  3007. lcd_set_custom_characters_degree();
  3008. setAllTargetHotends(0);
  3009. setTargetBed(0);
  3010. LongTimer pinda_timeout;
  3011. pinda_timeout.start();
  3012. bool target_temp_reached = true;
  3013. while (current_temperature_pinda > temp){
  3014. lcd_display_message_fullscreen_P(_i("Waiting for PINDA probe cooling"));////MSG_WAITING_TEMP_PINDA c=20 r=3
  3015. lcd_set_cursor(0, 4);
  3016. lcd_print(LCD_STR_THERMOMETER[0]);
  3017. lcd_print(ftostr3(current_temperature_pinda));
  3018. lcd_print("/");
  3019. lcd_print(ftostr3(temp));
  3020. lcd_print(LCD_STR_DEGREE);
  3021. delay_keep_alive(1000);
  3022. serialecho_temperatures();
  3023. if (pinda_timeout.expired(8 * 60 * 1000ul)) { //PINDA cooling from 60 C to 35 C takes about 7 minutes
  3024. target_temp_reached = false;
  3025. break;
  3026. }
  3027. }
  3028. lcd_set_custom_characters_arrows();
  3029. lcd_update_enable(true);
  3030. return target_temp_reached;
  3031. }
  3032. #endif //PINDA_THERMISTOR
  3033. void lcd_wait_for_heater() {
  3034. lcd_display_message_fullscreen_P(_T(MSG_WIZARD_HEATING));
  3035. lcd_set_degree();
  3036. lcd_set_cursor(0, 4);
  3037. lcd_print(LCD_STR_THERMOMETER[0]);
  3038. lcd_print(ftostr3(degHotend(active_extruder)));
  3039. lcd_print("/");
  3040. lcd_print(ftostr3(degTargetHotend(active_extruder)));
  3041. lcd_print(LCD_STR_DEGREE);
  3042. }
  3043. void lcd_wait_for_cool_down() {
  3044. lcd_set_custom_characters_degree();
  3045. setAllTargetHotends(0);
  3046. setTargetBed(0);
  3047. int fanSpeedBckp = fanSpeed;
  3048. fanSpeed = 255;
  3049. while ((degHotend(0)>MAX_HOTEND_TEMP_CALIBRATION) || (degBed() > MAX_BED_TEMP_CALIBRATION)) {
  3050. lcd_display_message_fullscreen_P(_i("Waiting for nozzle and bed cooling"));////MSG_WAITING_TEMP c=20 r=3
  3051. lcd_set_cursor(0, 4);
  3052. lcd_print(LCD_STR_THERMOMETER[0]);
  3053. lcd_print(ftostr3(degHotend(0)));
  3054. lcd_print("/0");
  3055. lcd_print(LCD_STR_DEGREE);
  3056. lcd_set_cursor(9, 4);
  3057. lcd_print(LCD_STR_BEDTEMP[0]);
  3058. lcd_print(ftostr3(degBed()));
  3059. lcd_print("/0");
  3060. lcd_print(LCD_STR_DEGREE);
  3061. lcd_set_custom_characters();
  3062. delay_keep_alive(1000);
  3063. serialecho_temperatures();
  3064. }
  3065. fanSpeed = fanSpeedBckp;
  3066. lcd_set_custom_characters_arrows();
  3067. lcd_update_enable(true);
  3068. }
  3069. // Lets the user move the Z carriage up to the end stoppers.
  3070. // When done, it sets the current Z to Z_MAX_POS and returns true.
  3071. // Otherwise the Z calibration is not changed and false is returned.
  3072. #ifndef TMC2130
  3073. bool lcd_calibrate_z_end_stop_manual(bool only_z)
  3074. {
  3075. // Don't know where we are. Let's claim we are Z=0, so the soft end stops will not be triggered when moving up.
  3076. current_position[Z_AXIS] = 0;
  3077. plan_set_position_curposXYZE();
  3078. // Until confirmed by the confirmation dialog.
  3079. for (;;) {
  3080. const char *msg = only_z ? _i("Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done.") : _i("Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done.");////MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8////MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
  3081. const char *msg_next = lcd_display_message_fullscreen_P(msg);
  3082. const bool multi_screen = msg_next != NULL;
  3083. unsigned long previous_millis_msg = _millis();
  3084. // Until the user finishes the z up movement.
  3085. lcd_encoder_diff = 0;
  3086. lcd_encoder = 0;
  3087. for (;;) {
  3088. manage_heater();
  3089. manage_inactivity(true);
  3090. if (abs(lcd_encoder_diff) >= ENCODER_PULSES_PER_STEP) {
  3091. _delay(50);
  3092. lcd_encoder += abs(lcd_encoder_diff / ENCODER_PULSES_PER_STEP);
  3093. lcd_encoder_diff = 0;
  3094. if (! planner_queue_full()) {
  3095. // Only move up, whatever direction the user rotates the encoder.
  3096. current_position[Z_AXIS] += fabs(lcd_encoder);
  3097. lcd_encoder = 0;
  3098. plan_buffer_line_curposXYZE(manual_feedrate[Z_AXIS] / 60);
  3099. }
  3100. }
  3101. if (lcd_clicked()) {
  3102. // Abort a move if in progress.
  3103. planner_abort_hard();
  3104. while (lcd_clicked()) ;
  3105. _delay(10);
  3106. while (lcd_clicked()) ;
  3107. break;
  3108. }
  3109. if (multi_screen && _millis() - previous_millis_msg > 5000) {
  3110. if (msg_next == NULL)
  3111. msg_next = msg;
  3112. msg_next = lcd_display_message_fullscreen_P(msg_next);
  3113. previous_millis_msg = _millis();
  3114. }
  3115. }
  3116. // Let the user confirm, that the Z carriage is at the top end stoppers.
  3117. int8_t result = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Are left and right Z~carriages all up?"), false);////MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
  3118. if (result == -1)
  3119. goto canceled;
  3120. else if (result == 1)
  3121. goto calibrated;
  3122. // otherwise perform another round of the Z up dialog.
  3123. }
  3124. calibrated:
  3125. // Let the machine think the Z axis is a bit higher than it is, so it will not home into the bed
  3126. // during the search for the induction points.
  3127. if ((PRINTER_TYPE == PRINTER_MK25) || (PRINTER_TYPE == PRINTER_MK2) || (PRINTER_TYPE == PRINTER_MK2_SNMM)) {
  3128. current_position[Z_AXIS] = Z_MAX_POS-3.f;
  3129. }
  3130. else {
  3131. current_position[Z_AXIS] = Z_MAX_POS+4.f;
  3132. }
  3133. plan_set_position_curposXYZE();
  3134. return true;
  3135. canceled:
  3136. return false;
  3137. }
  3138. #endif // TMC2130
  3139. static inline bool pgm_is_whitespace(const char *c_addr)
  3140. {
  3141. const char c = pgm_read_byte(c_addr);
  3142. return c == ' ' || c == '\t' || c == '\r' || c == '\n';
  3143. }
  3144. static inline bool pgm_is_interpunction(const char *c_addr)
  3145. {
  3146. const char c = pgm_read_byte(c_addr);
  3147. return c == '.' || c == ',' || c == ':'|| c == ';' || c == '?' || c == '!' || c == '/';
  3148. }
  3149. /**
  3150. * @brief show full screen message
  3151. *
  3152. * This function is non-blocking
  3153. * @param msg message to be displayed from PROGMEM
  3154. * @param nlines
  3155. * @return rest of the text (to be displayed on next page)
  3156. */
  3157. static const char* lcd_display_message_fullscreen_nonBlocking_P(const char *msg, uint8_t &nlines)
  3158. {
  3159. lcd_set_cursor(0, 0);
  3160. const char *msgend = msg;
  3161. uint8_t row = 0;
  3162. bool multi_screen = false;
  3163. for (; row < 4; ++ row) {
  3164. while (pgm_is_whitespace(msg))
  3165. ++ msg;
  3166. if (pgm_read_byte(msg) == 0)
  3167. // End of the message.
  3168. break;
  3169. lcd_set_cursor(0, row);
  3170. uint8_t linelen = min(strlen_P(msg), 20);
  3171. const char *msgend2 = msg + linelen;
  3172. msgend = msgend2;
  3173. if (row == 3 && linelen == 20) {
  3174. // Last line of the display, full line shall be displayed.
  3175. // Find out, whether this message will be split into multiple screens.
  3176. while (pgm_is_whitespace(msgend))
  3177. ++ msgend;
  3178. multi_screen = pgm_read_byte(msgend) != 0;
  3179. if (multi_screen)
  3180. msgend = (msgend2 -= 2);
  3181. }
  3182. if (pgm_read_byte(msgend) != 0 && ! pgm_is_whitespace(msgend) && ! pgm_is_interpunction(msgend)) {
  3183. // Splitting a word. Find the start of the current word.
  3184. while (msgend > msg && ! pgm_is_whitespace(msgend - 1))
  3185. -- msgend;
  3186. if (msgend == msg)
  3187. // Found a single long word, which cannot be split. Just cut it.
  3188. msgend = msgend2;
  3189. }
  3190. for (; msg < msgend; ++ msg) {
  3191. char c = char(pgm_read_byte(msg));
  3192. if (c == '~')
  3193. c = ' ';
  3194. lcd_print(c);
  3195. }
  3196. }
  3197. if (multi_screen) {
  3198. // Display the "next screen" indicator character.
  3199. // lcd_set_custom_characters_arrows();
  3200. lcd_set_custom_characters_nextpage();
  3201. lcd_set_cursor(19, 3);
  3202. // Display the down arrow.
  3203. lcd_print(char(1));
  3204. }
  3205. nlines = row;
  3206. return multi_screen ? msgend : NULL;
  3207. }
  3208. const char* lcd_display_message_fullscreen_P(const char *msg, uint8_t &nlines)
  3209. {
  3210. // Disable update of the screen by the usual lcd_update(0) routine.
  3211. lcd_update_enable(false);
  3212. lcd_clear();
  3213. // uint8_t nlines;
  3214. return lcd_display_message_fullscreen_nonBlocking_P(msg, nlines);
  3215. }
  3216. const char* lcd_display_message_fullscreen_P(const char *msg)
  3217. {
  3218. uint8_t nlines;
  3219. return lcd_display_message_fullscreen_P(msg, nlines);
  3220. }
  3221. /**
  3222. * @brief show full screen message and wait
  3223. *
  3224. * This function is blocking.
  3225. * @param msg message to be displayed from PROGMEM
  3226. */
  3227. void lcd_show_fullscreen_message_and_wait_P(const char *msg)
  3228. {
  3229. LcdUpdateDisabler lcdUpdateDisabler;
  3230. const char *msg_next = lcd_display_message_fullscreen_P(msg);
  3231. bool multi_screen = msg_next != NULL;
  3232. lcd_set_custom_characters_nextpage();
  3233. lcd_consume_click();
  3234. KEEPALIVE_STATE(PAUSED_FOR_USER);
  3235. // Until confirmed by a button click.
  3236. for (;;) {
  3237. if (!multi_screen) {
  3238. lcd_set_cursor(19, 3);
  3239. // Display the confirm char.
  3240. lcd_print(char(2));
  3241. }
  3242. // Wait for 5 seconds before displaying the next text.
  3243. for (uint8_t i = 0; i < 100; ++ i) {
  3244. delay_keep_alive(50);
  3245. if (lcd_clicked()) {
  3246. if (msg_next == NULL) {
  3247. KEEPALIVE_STATE(IN_HANDLER);
  3248. lcd_set_custom_characters();
  3249. lcd_update_enable(true);
  3250. lcd_update(2);
  3251. return;
  3252. }
  3253. else {
  3254. break;
  3255. }
  3256. }
  3257. }
  3258. if (multi_screen) {
  3259. if (msg_next == NULL)
  3260. msg_next = msg;
  3261. msg_next = lcd_display_message_fullscreen_P(msg_next);
  3262. if (msg_next == NULL) {
  3263. lcd_set_cursor(19, 3);
  3264. // Display the confirm char.
  3265. lcd_print(char(2));
  3266. }
  3267. }
  3268. }
  3269. }
  3270. bool lcd_wait_for_click_delay(uint16_t nDelay)
  3271. // nDelay :: timeout [s] (0 ~ no timeout)
  3272. // true ~ clicked, false ~ delayed
  3273. {
  3274. bool bDelayed;
  3275. long nTime0 = _millis()/1000;
  3276. lcd_consume_click();
  3277. KEEPALIVE_STATE(PAUSED_FOR_USER);
  3278. for (;;) {
  3279. manage_heater();
  3280. manage_inactivity(true);
  3281. bDelayed = ((_millis()/1000-nTime0) > nDelay);
  3282. bDelayed = (bDelayed && (nDelay != 0)); // 0 ~ no timeout, always waiting for click
  3283. if (lcd_clicked() || bDelayed) {
  3284. KEEPALIVE_STATE(IN_HANDLER);
  3285. return(!bDelayed);
  3286. }
  3287. }
  3288. }
  3289. void lcd_wait_for_click()
  3290. {
  3291. lcd_wait_for_click_delay(0);
  3292. }
  3293. //! @brief Show multiple screen message with yes and no possible choices and wait with possible timeout
  3294. //! @param msg Message to show
  3295. //! @param allow_timeouting if true, allows time outing of the screen
  3296. //! @param default_yes if true, yes choice is selected by default, otherwise no choice is preselected
  3297. //! @retval 1 yes choice selected by user
  3298. //! @retval 0 no choice selected by user
  3299. //! @retval -1 screen timed out
  3300. int8_t lcd_show_multiscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting, bool default_yes) //currently just max. n*4 + 3 lines supported (set in language header files)
  3301. {
  3302. return lcd_show_multiscreen_message_two_choices_and_wait_P(msg, allow_timeouting, default_yes, _T(MSG_YES), _T(MSG_NO));
  3303. }
  3304. //! @brief Show multiple screen message with two possible choices and wait with possible timeout
  3305. //! @param msg Message to show
  3306. //! @param allow_timeouting if true, allows time outing of the screen
  3307. //! @param default_first if true, fist choice is selected by default, otherwise second choice is preselected
  3308. //! @param first_choice text caption of first possible choice
  3309. //! @param second_choice text caption of second possible choice
  3310. //! @retval 1 first choice selected by user
  3311. //! @retval 0 second choice selected by user
  3312. //! @retval -1 screen timed out
  3313. int8_t lcd_show_multiscreen_message_two_choices_and_wait_P(const char *msg, bool allow_timeouting, bool default_first,
  3314. const char *first_choice, const char *second_choice)
  3315. {
  3316. const char *msg_next = lcd_display_message_fullscreen_P(msg);
  3317. bool multi_screen = msg_next != NULL;
  3318. bool yes = default_first ? true : false;
  3319. // Wait for user confirmation or a timeout.
  3320. unsigned long previous_millis_cmd = _millis();
  3321. int8_t enc_dif = lcd_encoder_diff;
  3322. lcd_consume_click();
  3323. //KEEPALIVE_STATE(PAUSED_FOR_USER);
  3324. for (;;) {
  3325. for (uint8_t i = 0; i < 100; ++i) {
  3326. delay_keep_alive(50);
  3327. if (allow_timeouting && _millis() - previous_millis_cmd > LCD_TIMEOUT_TO_STATUS)
  3328. return -1;
  3329. manage_heater();
  3330. manage_inactivity(true);
  3331. if (abs(enc_dif - lcd_encoder_diff) > 4) {
  3332. if (msg_next == NULL) {
  3333. lcd_set_cursor(0, 3);
  3334. if (enc_dif < lcd_encoder_diff && yes) {
  3335. lcd_puts_P((PSTR(" ")));
  3336. lcd_set_cursor(7, 3);
  3337. lcd_puts_P((PSTR(">")));
  3338. yes = false;
  3339. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  3340. }
  3341. else if (enc_dif > lcd_encoder_diff && !yes) {
  3342. lcd_puts_P((PSTR(">")));
  3343. lcd_set_cursor(7, 3);
  3344. lcd_puts_P((PSTR(" ")));
  3345. yes = true;
  3346. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  3347. }
  3348. enc_dif = lcd_encoder_diff;
  3349. }
  3350. else {
  3351. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  3352. break; //turning knob skips waiting loop
  3353. }
  3354. }
  3355. if (lcd_clicked()) {
  3356. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  3357. if (msg_next == NULL) {
  3358. //KEEPALIVE_STATE(IN_HANDLER);
  3359. lcd_set_custom_characters();
  3360. return yes;
  3361. }
  3362. else break;
  3363. }
  3364. }
  3365. if (multi_screen) {
  3366. if (msg_next == NULL) {
  3367. msg_next = msg;
  3368. }
  3369. msg_next = lcd_display_message_fullscreen_P(msg_next);
  3370. }
  3371. if (msg_next == NULL) {
  3372. lcd_set_cursor(0, 3);
  3373. if (yes) lcd_puts_P(PSTR(">"));
  3374. lcd_set_cursor(1, 3);
  3375. lcd_puts_P(first_choice);
  3376. lcd_set_cursor(7, 3);
  3377. if (!yes) lcd_puts_P(PSTR(">"));
  3378. lcd_set_cursor(8, 3);
  3379. lcd_puts_P(second_choice);
  3380. }
  3381. }
  3382. }
  3383. //! @brief Show single screen message with yes and no possible choices and wait with possible timeout
  3384. //! @param msg Message to show
  3385. //! @param allow_timeouting if true, allows time outing of the screen
  3386. //! @param default_yes if true, yes choice is selected by default, otherwise no choice is preselected
  3387. //! @retval 1 yes choice selected by user
  3388. //! @retval 0 no choice selected by user
  3389. //! @retval -1 screen timed out
  3390. int8_t lcd_show_fullscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting, bool default_yes)
  3391. {
  3392. lcd_display_message_fullscreen_P(msg);
  3393. if (default_yes) {
  3394. lcd_set_cursor(0, 2);
  3395. lcd_puts_P(PSTR(">"));
  3396. lcd_puts_P(_T(MSG_YES));
  3397. lcd_set_cursor(1, 3);
  3398. lcd_puts_P(_T(MSG_NO));
  3399. }
  3400. else {
  3401. lcd_set_cursor(1, 2);
  3402. lcd_puts_P(_T(MSG_YES));
  3403. lcd_set_cursor(0, 3);
  3404. lcd_puts_P(PSTR(">"));
  3405. lcd_puts_P(_T(MSG_NO));
  3406. }
  3407. int8_t retval = default_yes ? true : false;
  3408. // Wait for user confirmation or a timeout.
  3409. unsigned long previous_millis_cmd = _millis();
  3410. int8_t enc_dif = lcd_encoder_diff;
  3411. lcd_consume_click();
  3412. KEEPALIVE_STATE(PAUSED_FOR_USER);
  3413. for (;;) {
  3414. if (allow_timeouting && _millis() - previous_millis_cmd > LCD_TIMEOUT_TO_STATUS)
  3415. {
  3416. retval = -1;
  3417. break;
  3418. }
  3419. manage_heater();
  3420. manage_inactivity(true);
  3421. if (abs(enc_dif - lcd_encoder_diff) > 4) {
  3422. lcd_set_cursor(0, 2);
  3423. if (enc_dif < lcd_encoder_diff && retval) {
  3424. lcd_puts_P((PSTR(" ")));
  3425. lcd_set_cursor(0, 3);
  3426. lcd_puts_P((PSTR(">")));
  3427. retval = 0;
  3428. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  3429. }
  3430. else if (enc_dif > lcd_encoder_diff && !retval) {
  3431. lcd_puts_P((PSTR(">")));
  3432. lcd_set_cursor(0, 3);
  3433. lcd_puts_P((PSTR(" ")));
  3434. retval = 1;
  3435. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  3436. }
  3437. enc_dif = lcd_encoder_diff;
  3438. }
  3439. if (lcd_clicked()) {
  3440. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  3441. KEEPALIVE_STATE(IN_HANDLER);
  3442. break;
  3443. }
  3444. }
  3445. lcd_encoder_diff = 0;
  3446. return retval;
  3447. }
  3448. void lcd_bed_calibration_show_result(BedSkewOffsetDetectionResultType result, uint8_t point_too_far_mask)
  3449. {
  3450. const char *msg = NULL;
  3451. if (result == BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND) {
  3452. lcd_show_fullscreen_message_and_wait_P(_i("XYZ calibration failed. Bed calibration point was not found."));////MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=8
  3453. } else if (result == BED_SKEW_OFFSET_DETECTION_FITTING_FAILED) {
  3454. if (point_too_far_mask == 0)
  3455. msg = _T(MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED);
  3456. else if (point_too_far_mask == 2 || point_too_far_mask == 7)
  3457. // Only the center point or all the three front points.
  3458. msg = _i("XYZ calibration failed. Front calibration points not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=8
  3459. else if ((point_too_far_mask & 1) == 0)
  3460. // The right and maybe the center point out of reach.
  3461. msg = _i("XYZ calibration failed. Right front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=8
  3462. else
  3463. // The left and maybe the center point out of reach.
  3464. msg = _i("XYZ calibration failed. Left front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
  3465. lcd_show_fullscreen_message_and_wait_P(msg);
  3466. } else {
  3467. if (point_too_far_mask != 0) {
  3468. if (point_too_far_mask == 2 || point_too_far_mask == 7)
  3469. // Only the center point or all the three front points.
  3470. msg = _i("XYZ calibration compromised. Front calibration points not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
  3471. else if ((point_too_far_mask & 1) == 0)
  3472. // The right and maybe the center point out of reach.
  3473. msg = _i("XYZ calibration compromised. Right front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
  3474. else
  3475. // The left and maybe the center point out of reach.
  3476. msg = _i("XYZ calibration compromised. Left front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
  3477. lcd_show_fullscreen_message_and_wait_P(msg);
  3478. }
  3479. if (point_too_far_mask == 0 || result > 0) {
  3480. switch (result) {
  3481. default:
  3482. // should not happen
  3483. msg = _T(MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED);
  3484. break;
  3485. case BED_SKEW_OFFSET_DETECTION_PERFECT:
  3486. msg = _i("XYZ calibration ok. X/Y axes are perpendicular. Congratulations!");////MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
  3487. break;
  3488. case BED_SKEW_OFFSET_DETECTION_SKEW_MILD:
  3489. msg = _i("XYZ calibration all right. X/Y axes are slightly skewed. Good job!");////MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
  3490. break;
  3491. case BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME:
  3492. msg = _i("XYZ calibration all right. Skew will be corrected automatically.");////MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
  3493. break;
  3494. }
  3495. lcd_show_fullscreen_message_and_wait_P(msg);
  3496. }
  3497. }
  3498. }
  3499. void lcd_temp_cal_show_result(bool result) {
  3500. custom_message_type = CustomMsg::Status;
  3501. disable_x();
  3502. disable_y();
  3503. disable_z();
  3504. disable_e0();
  3505. disable_e1();
  3506. disable_e2();
  3507. setTargetBed(0); //set bed target temperature back to 0
  3508. if (result == true) {
  3509. eeprom_update_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 1);
  3510. SERIAL_ECHOLNPGM("Temperature calibration done. Continue with pressing the knob.");
  3511. lcd_show_fullscreen_message_and_wait_P(_T(MSG_TEMP_CALIBRATION_DONE));
  3512. eeprom_update_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE, 1);
  3513. }
  3514. else {
  3515. eeprom_update_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 0);
  3516. SERIAL_ECHOLNPGM("Temperature calibration failed. Continue with pressing the knob.");
  3517. lcd_show_fullscreen_message_and_wait_P(_i("Temperature calibration failed"));////MSG_TEMP_CAL_FAILED c=20 r=8
  3518. eeprom_update_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE, 0);
  3519. }
  3520. lcd_update_enable(true);
  3521. lcd_update(2);
  3522. }
  3523. static void lcd_show_end_stops() {
  3524. lcd_set_cursor(0, 0);
  3525. lcd_puts_P((PSTR("End stops diag")));
  3526. lcd_set_cursor(0, 1);
  3527. lcd_puts_P((READ(X_MIN_PIN) ^ (bool)X_MIN_ENDSTOP_INVERTING) ? (PSTR("X1")) : (PSTR("X0")));
  3528. lcd_set_cursor(0, 2);
  3529. lcd_puts_P((READ(Y_MIN_PIN) ^ (bool)Y_MIN_ENDSTOP_INVERTING) ? (PSTR("Y1")) : (PSTR("Y0")));
  3530. lcd_set_cursor(0, 3);
  3531. lcd_puts_P((READ(Z_MIN_PIN) ^ (bool)Z_MIN_ENDSTOP_INVERTING) ? (PSTR("Z1")) : (PSTR("Z0")));
  3532. }
  3533. #ifndef TMC2130
  3534. static void menu_show_end_stops() {
  3535. lcd_show_end_stops();
  3536. if (LCD_CLICKED) menu_back();
  3537. }
  3538. #endif // not defined TMC2130
  3539. // Lets the user move the Z carriage up to the end stoppers.
  3540. // When done, it sets the current Z to Z_MAX_POS and returns true.
  3541. // Otherwise the Z calibration is not changed and false is returned.
  3542. void lcd_diag_show_end_stops()
  3543. {
  3544. lcd_clear();
  3545. lcd_consume_click();
  3546. for (;;) {
  3547. manage_heater();
  3548. manage_inactivity(true);
  3549. lcd_show_end_stops();
  3550. if (lcd_clicked()) {
  3551. break;
  3552. }
  3553. }
  3554. lcd_clear();
  3555. lcd_return_to_status();
  3556. }
  3557. static void lcd_print_state(uint8_t state)
  3558. {
  3559. switch (state) {
  3560. case STATE_ON:
  3561. lcd_puts_P(_N(" 1"));
  3562. break;
  3563. case STATE_OFF:
  3564. lcd_puts_P(_N(" 0"));
  3565. break;
  3566. default:
  3567. lcd_puts_P(_T(MSG_NA));
  3568. break;
  3569. }
  3570. }
  3571. static void lcd_show_sensors_state()
  3572. {
  3573. //0: N/A; 1: OFF; 2: ON
  3574. uint8_t pinda_state = STATE_NA;
  3575. uint8_t finda_state = STATE_NA;
  3576. uint8_t idler_state = STATE_NA;
  3577. pinda_state = READ(Z_MIN_PIN);
  3578. if (mmu_enabled && ((_millis() - mmu_last_finda_response) < 1000ul) )
  3579. {
  3580. finda_state = mmu_finda;
  3581. }
  3582. if (ir_sensor_detected) {
  3583. idler_state = !READ(IR_SENSOR_PIN);
  3584. }
  3585. lcd_puts_at_P(0, 0, _i("Sensor state"));
  3586. lcd_puts_at_P(1, 1, _i("PINDA:"));
  3587. lcd_set_cursor(LCD_WIDTH - 4, 1);
  3588. lcd_print_state(pinda_state);
  3589. lcd_puts_at_P(1, 2, _i("FINDA:"));
  3590. lcd_set_cursor(LCD_WIDTH - 4, 2);
  3591. lcd_print_state(finda_state);
  3592. lcd_puts_at_P(1, 3, _i("IR:"));
  3593. lcd_set_cursor(LCD_WIDTH - 4, 3);
  3594. lcd_print_state(idler_state);
  3595. }
  3596. void lcd_menu_show_sensors_state() // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
  3597. {
  3598. lcd_timeoutToStatus.stop();
  3599. lcd_show_sensors_state();
  3600. if(LCD_CLICKED)
  3601. {
  3602. lcd_timeoutToStatus.start();
  3603. menu_back();
  3604. }
  3605. }
  3606. void prusa_statistics_err(char c){
  3607. SERIAL_ECHO("{[ERR:");
  3608. SERIAL_ECHO(c);
  3609. SERIAL_ECHO(']');
  3610. prusa_stat_farm_number();
  3611. }
  3612. static void prusa_statistics_case0(uint8_t statnr){
  3613. SERIAL_ECHO('{');
  3614. prusa_stat_printerstatus(statnr);
  3615. prusa_stat_farm_number();
  3616. prusa_stat_printinfo();
  3617. }
  3618. void prusa_statistics(int _message, uint8_t _fil_nr) {
  3619. #ifdef DEBUG_DISABLE_PRUSA_STATISTICS
  3620. return;
  3621. #endif //DEBUG_DISABLE_PRUSA_STATISTICS
  3622. switch (_message)
  3623. {
  3624. case 0: // default message
  3625. if (busy_state == PAUSED_FOR_USER)
  3626. {
  3627. prusa_statistics_case0(15);
  3628. }
  3629. else if (isPrintPaused)
  3630. {
  3631. prusa_statistics_case0(14);
  3632. }
  3633. else if (IS_SD_PRINTING || loading_flag)
  3634. {
  3635. prusa_statistics_case0(4);
  3636. }
  3637. else
  3638. {
  3639. SERIAL_ECHO('{');
  3640. prusa_stat_printerstatus(1);
  3641. prusa_stat_farm_number();
  3642. prusa_stat_diameter();
  3643. status_number = 1;
  3644. }
  3645. break;
  3646. case 1: // 1 heating
  3647. farm_status = 2;
  3648. SERIAL_ECHO('{');
  3649. prusa_stat_printerstatus(2);
  3650. prusa_stat_farm_number();
  3651. status_number = 2;
  3652. farm_timer = 1;
  3653. break;
  3654. case 2: // heating done
  3655. farm_status = 3;
  3656. SERIAL_ECHO('{');
  3657. prusa_stat_printerstatus(3);
  3658. prusa_stat_farm_number();
  3659. SERIAL_ECHOLN('}');
  3660. status_number = 3;
  3661. farm_timer = 1;
  3662. if (IS_SD_PRINTING || loading_flag)
  3663. {
  3664. farm_status = 4;
  3665. SERIAL_ECHO('{');
  3666. prusa_stat_printerstatus(4);
  3667. prusa_stat_farm_number();
  3668. status_number = 4;
  3669. }
  3670. else
  3671. {
  3672. SERIAL_ECHO('{');
  3673. prusa_stat_printerstatus(3);
  3674. prusa_stat_farm_number();
  3675. status_number = 3;
  3676. }
  3677. farm_timer = 1;
  3678. break;
  3679. case 3: // filament change
  3680. // must do a return here to prevent doing SERIAL_ECHOLN("}") at the very end of this function
  3681. // saved a considerable amount of FLASH
  3682. return;
  3683. break;
  3684. case 4: // print succesfull
  3685. SERIAL_ECHO("{[RES:1][FIL:");
  3686. MYSERIAL.print(int(_fil_nr));
  3687. SERIAL_ECHO(']');
  3688. prusa_stat_printerstatus(status_number);
  3689. prusa_stat_farm_number();
  3690. farm_timer = 2;
  3691. break;
  3692. case 5: // print not succesfull
  3693. SERIAL_ECHO("{[RES:0][FIL:");
  3694. MYSERIAL.print(int(_fil_nr));
  3695. SERIAL_ECHO(']');
  3696. prusa_stat_printerstatus(status_number);
  3697. prusa_stat_farm_number();
  3698. farm_timer = 2;
  3699. break;
  3700. case 6: // print done
  3701. SERIAL_ECHO("{[PRN:8]");
  3702. prusa_stat_farm_number();
  3703. status_number = 8;
  3704. farm_timer = 2;
  3705. break;
  3706. case 7: // print done - stopped
  3707. SERIAL_ECHO("{[PRN:9]");
  3708. prusa_stat_farm_number();
  3709. status_number = 9;
  3710. farm_timer = 2;
  3711. break;
  3712. case 8: // printer started
  3713. SERIAL_ECHO("{[PRN:0][PFN:");
  3714. status_number = 0;
  3715. SERIAL_ECHO(farm_no);
  3716. SERIAL_ECHO(']');
  3717. farm_timer = 2;
  3718. break;
  3719. case 20: // echo farm no
  3720. SERIAL_ECHO('{');
  3721. prusa_stat_printerstatus(status_number);
  3722. prusa_stat_farm_number();
  3723. farm_timer = 4;
  3724. break;
  3725. case 21: // temperatures
  3726. SERIAL_ECHO('{');
  3727. prusa_stat_temperatures();
  3728. prusa_stat_farm_number();
  3729. prusa_stat_printerstatus(status_number);
  3730. break;
  3731. case 22: // waiting for filament change
  3732. SERIAL_ECHO("{[PRN:5]");
  3733. prusa_stat_farm_number();
  3734. status_number = 5;
  3735. break;
  3736. case 90: // Error - Thermal Runaway
  3737. prusa_statistics_err('1');
  3738. break;
  3739. case 91: // Error - Thermal Runaway Preheat
  3740. prusa_statistics_err('2');
  3741. break;
  3742. case 92: // Error - Min temp
  3743. prusa_statistics_err('3');
  3744. break;
  3745. case 93: // Error - Max temp
  3746. prusa_statistics_err('4');
  3747. break;
  3748. case 99: // heartbeat
  3749. SERIAL_ECHO("{[PRN:99]");
  3750. prusa_stat_temperatures();
  3751. SERIAL_ECHO("[PFN:");
  3752. SERIAL_ECHO(farm_no);
  3753. SERIAL_ECHO(']');
  3754. break;
  3755. }
  3756. SERIAL_ECHOLN('}');
  3757. }
  3758. static void prusa_stat_printerstatus(int _status)
  3759. {
  3760. SERIAL_ECHO("[PRN:");
  3761. SERIAL_ECHO(_status);
  3762. SERIAL_ECHO(']');
  3763. }
  3764. static void prusa_stat_farm_number() {
  3765. SERIAL_ECHO("[PFN:");
  3766. SERIAL_ECHO(farm_no);
  3767. SERIAL_ECHO(']');
  3768. }
  3769. static void prusa_stat_diameter() {
  3770. SERIAL_ECHO("[DIA:");
  3771. SERIAL_ECHO(eeprom_read_word((uint16_t*)EEPROM_NOZZLE_DIAMETER_uM));
  3772. SERIAL_ECHO(']');
  3773. }
  3774. static void prusa_stat_temperatures()
  3775. {
  3776. SERIAL_ECHO("[ST0:");
  3777. SERIAL_ECHO(target_temperature[0]);
  3778. SERIAL_ECHO("][STB:");
  3779. SERIAL_ECHO(target_temperature_bed);
  3780. SERIAL_ECHO("][AT0:");
  3781. SERIAL_ECHO(current_temperature[0]);
  3782. SERIAL_ECHO("][ATB:");
  3783. SERIAL_ECHO(current_temperature_bed);
  3784. SERIAL_ECHO(']');
  3785. }
  3786. static void prusa_stat_printinfo()
  3787. {
  3788. SERIAL_ECHO("[TFU:");
  3789. SERIAL_ECHO(total_filament_used);
  3790. SERIAL_ECHO("][PCD:");
  3791. SERIAL_ECHO(itostr3(card.percentDone()));
  3792. SERIAL_ECHO("][FEM:");
  3793. SERIAL_ECHO(itostr3(feedmultiply));
  3794. SERIAL_ECHO("][FNM:");
  3795. SERIAL_ECHO(longFilenameOLD);
  3796. SERIAL_ECHO("][TIM:");
  3797. if (starttime != 0)
  3798. {
  3799. SERIAL_ECHO(_millis() / 1000 - starttime / 1000);
  3800. }
  3801. else
  3802. {
  3803. SERIAL_ECHO(0);
  3804. }
  3805. SERIAL_ECHO("][FWR:");
  3806. SERIAL_ECHO(FW_VERSION);
  3807. SERIAL_ECHO(']');
  3808. prusa_stat_diameter();
  3809. }
  3810. /*
  3811. void lcd_pick_babystep(){
  3812. int enc_dif = 0;
  3813. int cursor_pos = 1;
  3814. int fsm = 0;
  3815. lcd_clear();
  3816. lcd_set_cursor(0, 0);
  3817. lcd_puts_P(_i("Pick print"));////MSG_PICK_Z
  3818. lcd_set_cursor(3, 2);
  3819. lcd_print("1");
  3820. lcd_set_cursor(3, 3);
  3821. lcd_print("2");
  3822. lcd_set_cursor(12, 2);
  3823. lcd_print("3");
  3824. lcd_set_cursor(12, 3);
  3825. lcd_print("4");
  3826. lcd_set_cursor(1, 2);
  3827. lcd_print(">");
  3828. enc_dif = lcd_encoder_diff;
  3829. while (fsm == 0) {
  3830. manage_heater();
  3831. manage_inactivity(true);
  3832. if ( abs((enc_dif - lcd_encoder_diff)) > 4 ) {
  3833. if ( (abs(enc_dif - lcd_encoder_diff)) > 1 ) {
  3834. if (enc_dif > lcd_encoder_diff ) {
  3835. cursor_pos --;
  3836. }
  3837. if (enc_dif < lcd_encoder_diff ) {
  3838. cursor_pos ++;
  3839. }
  3840. if (cursor_pos > 4) {
  3841. cursor_pos = 4;
  3842. }
  3843. if (cursor_pos < 1) {
  3844. cursor_pos = 1;
  3845. }
  3846. lcd_set_cursor(1, 2);
  3847. lcd_print(" ");
  3848. lcd_set_cursor(1, 3);
  3849. lcd_print(" ");
  3850. lcd_set_cursor(10, 2);
  3851. lcd_print(" ");
  3852. lcd_set_cursor(10, 3);
  3853. lcd_print(" ");
  3854. if (cursor_pos < 3) {
  3855. lcd_set_cursor(1, cursor_pos+1);
  3856. lcd_print(">");
  3857. }else{
  3858. lcd_set_cursor(10, cursor_pos-1);
  3859. lcd_print(">");
  3860. }
  3861. enc_dif = lcd_encoder_diff;
  3862. _delay(100);
  3863. }
  3864. }
  3865. if (lcd_clicked()) {
  3866. fsm = cursor_pos;
  3867. int babyStepZ;
  3868. EEPROM_read_B(EEPROM_BABYSTEP_Z0+((fsm-1)*2),&babyStepZ);
  3869. EEPROM_save_B(EEPROM_BABYSTEP_Z,&babyStepZ);
  3870. calibration_status_store(CALIBRATION_STATUS_CALIBRATED);
  3871. _delay(500);
  3872. }
  3873. };
  3874. lcd_clear();
  3875. lcd_return_to_status();
  3876. }
  3877. */
  3878. void lcd_move_menu_axis()
  3879. {
  3880. MENU_BEGIN();
  3881. MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
  3882. MENU_ITEM_SUBMENU_P(_i("Move X"), lcd_move_x);////MSG_MOVE_X
  3883. MENU_ITEM_SUBMENU_P(_i("Move Y"), lcd_move_y);////MSG_MOVE_Y
  3884. MENU_ITEM_SUBMENU_P(_i("Move Z"), lcd_move_z);////MSG_MOVE_Z
  3885. MENU_ITEM_SUBMENU_P(_i("Extruder"), lcd_move_e);////MSG_MOVE_E
  3886. MENU_END();
  3887. }
  3888. static void lcd_move_menu_1mm()
  3889. {
  3890. move_menu_scale = 1.0;
  3891. lcd_move_menu_axis();
  3892. }
  3893. void EEPROM_save(int pos, uint8_t* value, uint8_t size)
  3894. {
  3895. do
  3896. {
  3897. eeprom_write_byte((unsigned char*)pos, *value);
  3898. pos++;
  3899. value++;
  3900. } while (--size);
  3901. }
  3902. void EEPROM_read(int pos, uint8_t* value, uint8_t size)
  3903. {
  3904. do
  3905. {
  3906. *value = eeprom_read_byte((unsigned char*)pos);
  3907. pos++;
  3908. value++;
  3909. } while (--size);
  3910. }
  3911. #ifdef SDCARD_SORT_ALPHA
  3912. static void lcd_sort_type_set() {
  3913. uint8_t sdSort;
  3914. EEPROM_read(EEPROM_SD_SORT, (uint8_t*)&sdSort, sizeof(sdSort));
  3915. switch (sdSort) {
  3916. case SD_SORT_TIME: sdSort = SD_SORT_ALPHA; break;
  3917. case SD_SORT_ALPHA: sdSort = SD_SORT_NONE; break;
  3918. default: sdSort = SD_SORT_TIME;
  3919. }
  3920. eeprom_update_byte((unsigned char *)EEPROM_SD_SORT, sdSort);
  3921. presort_flag = true;
  3922. }
  3923. #endif //SDCARD_SORT_ALPHA
  3924. #ifdef TMC2130
  3925. static void lcd_crash_mode_info()
  3926. {
  3927. lcd_update_enable(true);
  3928. static uint32_t tim = 0;
  3929. if ((tim + 1000) < _millis())
  3930. {
  3931. lcd_clear();
  3932. fputs_P(_i("Crash detection can\nbe turned on only in\nNormal mode"), lcdout);////MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
  3933. tim = _millis();
  3934. }
  3935. menu_back_if_clicked();
  3936. }
  3937. static void lcd_crash_mode_info2()
  3938. {
  3939. lcd_update_enable(true);
  3940. static uint32_t tim = 0;
  3941. if ((tim + 1000) < _millis())
  3942. {
  3943. lcd_clear();
  3944. fputs_P(_i("WARNING:\nCrash detection\ndisabled in\nStealth mode"), lcdout);////MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
  3945. tim = _millis();
  3946. }
  3947. menu_back_if_clicked();
  3948. }
  3949. #endif //TMC2130
  3950. #ifdef FILAMENT_SENSOR
  3951. static void lcd_filament_autoload_info()
  3952. {
  3953. uint8_t nlines;
  3954. lcd_update_enable(true);
  3955. static uint32_t tim = 0;
  3956. if ((tim + 1000) < _millis())
  3957. {
  3958. lcd_display_message_fullscreen_nonBlocking_P(_i("Autoloading filament available only when filament sensor is turned on..."), nlines); ////MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
  3959. tim = _millis();
  3960. }
  3961. menu_back_if_clicked();
  3962. }
  3963. static void lcd_fsensor_fail()
  3964. {
  3965. uint8_t nlines;
  3966. lcd_update_enable(true);
  3967. static uint32_t tim = 0;
  3968. if ((tim + 1000) < _millis())
  3969. {
  3970. lcd_display_message_fullscreen_nonBlocking_P(_i("ERROR: Filament sensor is not responding, please check connection."), nlines);////MSG_FSENS_NOT_RESPONDING c=20 r=4
  3971. tim = _millis();
  3972. }
  3973. menu_back_if_clicked();
  3974. }
  3975. #endif //FILAMENT_SENSOR
  3976. //-//
  3977. static void lcd_sound_state_set(void)
  3978. {
  3979. Sound_CycleState();
  3980. }
  3981. #ifndef MMU_FORCE_STEALTH_MODE
  3982. static void lcd_silent_mode_mmu_set() {
  3983. if (SilentModeMenu_MMU == 1) SilentModeMenu_MMU = 0;
  3984. else SilentModeMenu_MMU = 1;
  3985. //saving to eeprom is done in mmu_loop() after mmu actually switches state and confirms with "ok"
  3986. }
  3987. #endif //MMU_FORCE_STEALTH_MODE
  3988. static void lcd_silent_mode_set() {
  3989. switch (SilentModeMenu) {
  3990. #ifdef TMC2130
  3991. case SILENT_MODE_NORMAL: SilentModeMenu = SILENT_MODE_STEALTH; break;
  3992. case SILENT_MODE_STEALTH: SilentModeMenu = SILENT_MODE_NORMAL; break;
  3993. default: SilentModeMenu = SILENT_MODE_NORMAL; break; // (probably) not needed
  3994. #else
  3995. case SILENT_MODE_POWER: SilentModeMenu = SILENT_MODE_SILENT; break;
  3996. case SILENT_MODE_SILENT: SilentModeMenu = SILENT_MODE_AUTO; break;
  3997. case SILENT_MODE_AUTO: SilentModeMenu = SILENT_MODE_POWER; break;
  3998. default: SilentModeMenu = SILENT_MODE_POWER; break; // (probably) not needed
  3999. #endif //TMC2130
  4000. }
  4001. eeprom_update_byte((unsigned char *)EEPROM_SILENT, SilentModeMenu);
  4002. #ifdef TMC2130
  4003. lcd_display_message_fullscreen_P(_i("Mode change in progress ..."));
  4004. // Wait until the planner queue is drained and the stepper routine achieves
  4005. // an idle state.
  4006. st_synchronize();
  4007. if (tmc2130_wait_standstill_xy(1000)) {}
  4008. // MYSERIAL.print("standstill OK");
  4009. // else
  4010. // MYSERIAL.print("standstill NG!");
  4011. cli();
  4012. tmc2130_mode = (SilentModeMenu != SILENT_MODE_NORMAL)?TMC2130_MODE_SILENT:TMC2130_MODE_NORMAL;
  4013. update_mode_profile();
  4014. tmc2130_init();
  4015. // We may have missed a stepper timer interrupt due to the time spent in tmc2130_init.
  4016. // Be safe than sorry, reset the stepper timer before re-enabling interrupts.
  4017. st_reset_timer();
  4018. sei();
  4019. #endif //TMC2130
  4020. st_current_init();
  4021. #ifdef TMC2130
  4022. if (lcd_crash_detect_enabled() && (SilentModeMenu != SILENT_MODE_NORMAL))
  4023. menu_submenu(lcd_crash_mode_info2);
  4024. lcd_encoder_diff=0; // reset 'encoder buffer'
  4025. #endif //TMC2130
  4026. }
  4027. #ifdef TMC2130
  4028. static void crash_mode_switch()
  4029. {
  4030. if (lcd_crash_detect_enabled())
  4031. {
  4032. lcd_crash_detect_disable();
  4033. }
  4034. else
  4035. {
  4036. lcd_crash_detect_enable();
  4037. }
  4038. if (IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LcdCommands::Layer1Cal)) menu_goto(lcd_tune_menu, 9, true, true);
  4039. else menu_goto(lcd_settings_menu, 9, true, true);
  4040. }
  4041. #endif //TMC2130
  4042. #ifdef FILAMENT_SENSOR
  4043. static void lcd_fsensor_state_set()
  4044. {
  4045. FSensorStateMenu = !FSensorStateMenu; //set also from fsensor_enable() and fsensor_disable()
  4046. if (!FSensorStateMenu) {
  4047. fsensor_disable();
  4048. if (fsensor_autoload_enabled && !mmu_enabled)
  4049. menu_submenu(lcd_filament_autoload_info);
  4050. }
  4051. else {
  4052. fsensor_enable();
  4053. if (fsensor_not_responding && !mmu_enabled)
  4054. menu_submenu(lcd_fsensor_fail);
  4055. }
  4056. }
  4057. #endif //FILAMENT_SENSOR
  4058. #if !SDSORT_USES_RAM
  4059. void lcd_set_degree() {
  4060. lcd_set_custom_characters_degree();
  4061. }
  4062. void lcd_set_progress() {
  4063. lcd_set_custom_characters_progress();
  4064. }
  4065. #endif
  4066. #if (LANG_MODE != 0)
  4067. void menu_setlang(unsigned char lang)
  4068. {
  4069. if (!lang_select(lang))
  4070. {
  4071. if (lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Copy selected language?"), false, true))
  4072. lang_boot_update_start(lang);
  4073. lcd_update_enable(true);
  4074. lcd_clear();
  4075. menu_goto(lcd_language_menu, 0, true, true);
  4076. lcd_timeoutToStatus.stop(); //infinite timeout
  4077. lcd_draw_update = 2;
  4078. }
  4079. }
  4080. static void lcd_language_menu()
  4081. {
  4082. MENU_BEGIN();
  4083. if (lang_is_selected()) MENU_ITEM_BACK_P(_T(MSG_SETTINGS)); //
  4084. if (menu_item_text_P(lang_get_name_by_code(lang_get_code(0)))) //primary language
  4085. {
  4086. menu_setlang(0);
  4087. return;
  4088. }
  4089. uint8_t cnt = lang_get_count();
  4090. #ifdef W25X20CL
  4091. if (cnt == 2) //display secondary language in case of clear xflash
  4092. {
  4093. if (menu_item_text_P(lang_get_name_by_code(lang_get_code(1))))
  4094. {
  4095. menu_setlang(1);
  4096. return;
  4097. }
  4098. }
  4099. else
  4100. for (int i = 2; i < cnt; i++) //skip seconday language - solved in lang_select (MK3)
  4101. #else //W25X20CL
  4102. for (int i = 1; i < cnt; i++) //all seconday languages (MK2/25)
  4103. #endif //W25X20CL
  4104. if (menu_item_text_P(lang_get_name_by_code(lang_get_code(i))))
  4105. {
  4106. menu_setlang(i);
  4107. return;
  4108. }
  4109. MENU_END();
  4110. }
  4111. #endif //(LANG_MODE != 0)
  4112. void lcd_mesh_bedleveling()
  4113. {
  4114. mesh_bed_run_from_menu = true;
  4115. enquecommand_P(PSTR("G80"));
  4116. lcd_return_to_status();
  4117. }
  4118. void lcd_mesh_calibration()
  4119. {
  4120. enquecommand_P(PSTR("M45"));
  4121. lcd_return_to_status();
  4122. }
  4123. void lcd_mesh_calibration_z()
  4124. {
  4125. enquecommand_P(PSTR("M45 Z"));
  4126. lcd_return_to_status();
  4127. }
  4128. void lcd_pinda_calibration_menu()
  4129. {
  4130. MENU_BEGIN();
  4131. MENU_ITEM_BACK_P(_T(MSG_MENU_CALIBRATION));
  4132. MENU_ITEM_SUBMENU_P(_i("Calibrate"), lcd_calibrate_pinda);////MSG_CALIBRATE_PINDA c=17 r=1
  4133. MENU_END();
  4134. }
  4135. void lcd_temp_calibration_set() {
  4136. bool temp_cal_active = eeprom_read_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE);
  4137. temp_cal_active = !temp_cal_active;
  4138. eeprom_update_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE, temp_cal_active);
  4139. }
  4140. #ifdef HAS_SECOND_SERIAL_PORT
  4141. void lcd_second_serial_set() {
  4142. if(selectedSerialPort == 1) selectedSerialPort = 0;
  4143. else selectedSerialPort = 1;
  4144. eeprom_update_byte((unsigned char *)EEPROM_SECOND_SERIAL_ACTIVE, selectedSerialPort);
  4145. MYSERIAL.begin(BAUDRATE);
  4146. }
  4147. #endif //HAS_SECOND_SERIAL_PORT
  4148. void lcd_calibrate_pinda() {
  4149. enquecommand_P(PSTR("G76"));
  4150. lcd_return_to_status();
  4151. }
  4152. #ifndef SNMM
  4153. /*void lcd_calibrate_extruder() {
  4154. if (degHotend0() > EXTRUDE_MINTEMP)
  4155. {
  4156. current_position[E_AXIS] = 0; //set initial position to zero
  4157. plan_set_e_position(current_position[E_AXIS]);
  4158. //long steps_start = st_get_position(E_AXIS);
  4159. long steps_final;
  4160. float e_steps_per_unit;
  4161. float feedrate = (180 / axis_steps_per_unit[E_AXIS]) * 1; //3 //initial automatic extrusion feedrate (depends on current value of axis_steps_per_unit to avoid too fast extrusion)
  4162. float e_shift_calibration = (axis_steps_per_unit[E_AXIS] > 180 ) ? ((180 / axis_steps_per_unit[E_AXIS]) * 70): 70; //length of initial automatic extrusion sequence
  4163. const char *msg_e_cal_knob = _i("Rotate knob until mark reaches extruder body. Click when done.");////MSG_E_CAL_KNOB c=20 r=8
  4164. const char *msg_next_e_cal_knob = lcd_display_message_fullscreen_P(msg_e_cal_knob);
  4165. const bool multi_screen = msg_next_e_cal_knob != NULL;
  4166. unsigned long msg_millis;
  4167. lcd_show_fullscreen_message_and_wait_P(_i("Mark filament 100mm from extruder body. Click when done."));////MSG_MARK_FIL c=20 r=8
  4168. lcd_clear();
  4169. lcd_set_cursor(0, 1); lcd_puts_P(_T(MSG_PLEASE_WAIT));
  4170. current_position[E_AXIS] += e_shift_calibration;
  4171. plan_buffer_line_curposXYZE(feedrate, active_extruder);
  4172. st_synchronize();
  4173. lcd_display_message_fullscreen_P(msg_e_cal_knob);
  4174. msg_millis = _millis();
  4175. while (!LCD_CLICKED) {
  4176. if (multi_screen && _millis() - msg_millis > 5000) {
  4177. if (msg_next_e_cal_knob == NULL)
  4178. msg_next_e_cal_knob = msg_e_cal_knob;
  4179. msg_next_e_cal_knob = lcd_display_message_fullscreen_P(msg_next_e_cal_knob);
  4180. msg_millis = _millis();
  4181. }
  4182. //manage_inactivity(true);
  4183. manage_heater();
  4184. if (abs(lcd_encoder_diff) >= ENCODER_PULSES_PER_STEP) { //adjusting mark by knob rotation
  4185. delay_keep_alive(50);
  4186. //previous_millis_cmd = _millis();
  4187. lcd_encoder += (lcd_encoder_diff / ENCODER_PULSES_PER_STEP);
  4188. lcd_encoder_diff = 0;
  4189. if (!planner_queue_full()) {
  4190. current_position[E_AXIS] += float(abs((int)lcd_encoder)) * 0.01; //0.05
  4191. lcd_encoder = 0;
  4192. plan_buffer_line_curposXYZE(feedrate, active_extruder);
  4193. }
  4194. }
  4195. }
  4196. steps_final = current_position[E_AXIS] * axis_steps_per_unit[E_AXIS];
  4197. //steps_final = st_get_position(E_AXIS);
  4198. lcd_draw_update = 1;
  4199. e_steps_per_unit = ((float)(steps_final)) / 100.0f;
  4200. if (e_steps_per_unit < MIN_E_STEPS_PER_UNIT) e_steps_per_unit = MIN_E_STEPS_PER_UNIT;
  4201. if (e_steps_per_unit > MAX_E_STEPS_PER_UNIT) e_steps_per_unit = MAX_E_STEPS_PER_UNIT;
  4202. lcd_clear();
  4203. axis_steps_per_unit[E_AXIS] = e_steps_per_unit;
  4204. enquecommand_P(PSTR("M500")); //store settings to eeprom
  4205. //lcd_drawedit(PSTR("Result"), ftostr31(axis_steps_per_unit[E_AXIS]));
  4206. //delay_keep_alive(2000);
  4207. delay_keep_alive(500);
  4208. lcd_show_fullscreen_message_and_wait_P(_i("E calibration finished. Please clean the nozzle. Click when done."));////MSG_CLEAN_NOZZLE_E c=20 r=8
  4209. lcd_update_enable(true);
  4210. lcd_draw_update = 2;
  4211. }
  4212. else
  4213. {
  4214. show_preheat_nozzle_warning();
  4215. }
  4216. lcd_return_to_status();
  4217. }
  4218. void lcd_extr_cal_reset() {
  4219. float tmp1[] = DEFAULT_AXIS_STEPS_PER_UNIT;
  4220. axis_steps_per_unit[E_AXIS] = tmp1[3];
  4221. //extrudemultiply = 100;
  4222. enquecommand_P(PSTR("M500"));
  4223. }*/
  4224. #endif
  4225. void lcd_toshiba_flash_air_compatibility_toggle()
  4226. {
  4227. card.ToshibaFlashAir_enable(! card.ToshibaFlashAir_isEnabled());
  4228. eeprom_update_byte((uint8_t*)EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY, card.ToshibaFlashAir_isEnabled());
  4229. }
  4230. //! @brief Continue first layer calibration with previous value or start from zero?
  4231. //!
  4232. //! @code{.unparsed}
  4233. //! |01234567890123456789|
  4234. //! |Sheet Smooth1 actual| c=a, c=b, a+b = 13
  4235. //! |Z offset: -1.480 mm | c=a, c=b, a+b = 14
  4236. //! |>Continue | c=19
  4237. //! | Start from zero | c=19
  4238. //! ----------------------
  4239. //! @endcode
  4240. void lcd_first_layer_calibration_reset()
  4241. {
  4242. typedef struct
  4243. {
  4244. bool reset;
  4245. } MenuData;
  4246. static_assert(sizeof(menu_data)>= sizeof(MenuData),"_menu_data_t doesn't fit into menu_data");
  4247. MenuData* menuData = (MenuData*)&(menu_data[0]);
  4248. if(LCD_CLICKED || !eeprom_is_sheet_initialized(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet))) ||
  4249. (calibration_status() >= CALIBRATION_STATUS_LIVE_ADJUST) ||
  4250. (0 == static_cast<int16_t>(eeprom_read_word(reinterpret_cast<uint16_t*>
  4251. (&EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset)))))
  4252. {
  4253. if (menuData->reset)
  4254. {
  4255. eeprom_update_word(reinterpret_cast<uint16_t*>(&EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset), 0xffff);
  4256. }
  4257. menu_goto(lcd_v2_calibration,0,true,true);
  4258. }
  4259. if (lcd_encoder > 0)
  4260. {
  4261. menuData->reset = true;
  4262. lcd_encoder = 1;
  4263. }
  4264. else if (lcd_encoder < 1)
  4265. {
  4266. menuData->reset = false;
  4267. lcd_encoder = 0;
  4268. }
  4269. char sheet_name[sizeof(Sheet::name)];
  4270. eeprom_read_block(sheet_name, &EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].name, sizeof(Sheet::name));
  4271. lcd_set_cursor(0, 0);
  4272. float offset = static_cast<int16_t>(eeprom_read_word(reinterpret_cast<uint16_t*>(&EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset)))/cs.axis_steps_per_unit[Z_AXIS];
  4273. lcd_printf_P(_i("Sheet %.7s\nZ offset: %+1.3f mm\n%cContinue\n%cStart from zero"), //// \n denotes line break, %.7s is replaced by 7 character long sheet name, %+1.3f is replaced by 6 character long floating point number, %c is replaced by > or white space (one character) based on whether first or second option is selected. % denoted place holders can not be reordered. r=4
  4274. sheet_name, offset, menuData->reset ? ' ' : '>', menuData->reset ? '>' : ' ');
  4275. }
  4276. void lcd_v2_calibration()
  4277. {
  4278. if (mmu_enabled)
  4279. {
  4280. const uint8_t filament = choose_menu_P(
  4281. _i("Select filament:"), ////c=20 r=1
  4282. _T(MSG_FILAMENT),_i("Cancel")); ////c=19 r=1
  4283. if (filament < 5)
  4284. {
  4285. lay1cal_filament = filament;
  4286. }
  4287. else
  4288. {
  4289. menu_back();
  4290. return;
  4291. }
  4292. }
  4293. else if (!eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE))
  4294. {
  4295. bool loaded = false;
  4296. if (fsensor_enabled && ir_sensor_detected)
  4297. {
  4298. loaded = (digitalRead(IR_SENSOR_PIN) == 0);
  4299. }
  4300. else
  4301. {
  4302. loaded = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Is filament loaded?"), false, true);////MSG_PLA_FILAMENT_LOADED c=20 r=2
  4303. lcd_update_enabled = true;
  4304. }
  4305. if (!loaded)
  4306. {
  4307. lcd_display_message_fullscreen_P(_i("Please load filament first."));////MSG_PLEASE_LOAD_PLA c=20 r=4
  4308. lcd_consume_click();
  4309. for (uint_least8_t i = 0; i < 20; i++) { //wait max. 2s
  4310. delay_keep_alive(100);
  4311. if (lcd_clicked()) {
  4312. break;
  4313. }
  4314. }
  4315. lcd_update_enabled = true;
  4316. menu_back();
  4317. return;
  4318. }
  4319. }
  4320. eFilamentAction = FilamentAction::Lay1Cal;
  4321. menu_goto(lcd_generic_preheat_menu, 0, true, true);
  4322. }
  4323. void lcd_wizard() {
  4324. bool result = true;
  4325. if (calibration_status() != CALIBRATION_STATUS_ASSEMBLED) {
  4326. result = lcd_show_multiscreen_message_yes_no_and_wait_P(_i("Running Wizard will delete current calibration results and start from the beginning. Continue?"), false, false);////MSG_WIZARD_RERUN c=20 r=7
  4327. }
  4328. if (result) {
  4329. calibration_status_store(CALIBRATION_STATUS_ASSEMBLED);
  4330. lcd_wizard(WizState::Run);
  4331. }
  4332. else {
  4333. lcd_return_to_status();
  4334. lcd_update_enable(true);
  4335. lcd_update(2);
  4336. }
  4337. }
  4338. #if (LANG_MODE != 0)
  4339. void lcd_language()
  4340. {
  4341. lcd_update_enable(true);
  4342. lcd_clear();
  4343. menu_goto(lcd_language_menu, 0, true, true);
  4344. lcd_timeoutToStatus.stop(); //infinite timeout
  4345. lcd_draw_update = 2;
  4346. while ((menu_menu != lcd_status_screen) && (!lang_is_selected()))
  4347. {
  4348. _delay(50);
  4349. lcd_update(0);
  4350. manage_heater();
  4351. manage_inactivity(true);
  4352. }
  4353. if (lang_is_selected())
  4354. lcd_return_to_status();
  4355. else
  4356. lang_select(LANG_ID_PRI);
  4357. }
  4358. #endif
  4359. static void wait_preheat()
  4360. {
  4361. current_position[Z_AXIS] = 100; //move in z axis to make space for loading filament
  4362. plan_buffer_line_curposXYZE(homing_feedrate[Z_AXIS] / 60);
  4363. delay_keep_alive(2000);
  4364. lcd_display_message_fullscreen_P(_T(MSG_WIZARD_HEATING));
  4365. lcd_set_custom_characters();
  4366. while (abs(degHotend(0) - degTargetHotend(0)) > 3) {
  4367. lcd_display_message_fullscreen_P(_T(MSG_WIZARD_HEATING));
  4368. lcd_set_cursor(0, 4);
  4369. //Print the hotend temperature (9 chars total)
  4370. lcdui_print_temp(LCD_STR_THERMOMETER[0], (int)(degHotend(0) + 0.5), (int)(degTargetHotend(0) + 0.5));
  4371. delay_keep_alive(1000);
  4372. }
  4373. }
  4374. static void lcd_wizard_load()
  4375. {
  4376. if (mmu_enabled)
  4377. {
  4378. lcd_show_fullscreen_message_and_wait_P(_i("Please insert filament into the first tube of the MMU, then press the knob to load it."));////c=20 r=8
  4379. tmp_extruder = 0;
  4380. }
  4381. else
  4382. {
  4383. lcd_show_fullscreen_message_and_wait_P(_i("Please insert filament into the extruder, then press the knob to load it."));////MSG_WIZARD_LOAD_FILAMENT c=20 r=8
  4384. }
  4385. lcd_update_enable(false);
  4386. lcd_clear();
  4387. lcd_puts_at_P(0, 2, _T(MSG_LOADING_FILAMENT));
  4388. #ifdef SNMM
  4389. change_extr(0);
  4390. #endif
  4391. loading_flag = true;
  4392. gcode_M701();
  4393. }
  4394. bool lcd_autoDepleteEnabled()
  4395. {
  4396. return (lcd_autoDeplete && fsensor_enabled);
  4397. }
  4398. static void wizard_lay1cal_message(bool cold)
  4399. {
  4400. lcd_show_fullscreen_message_and_wait_P(
  4401. _i("Now I will calibrate distance between tip of the nozzle and heatbed surface.")); ////MSG_WIZARD_V2_CAL c=20 r=8
  4402. if (mmu_enabled)
  4403. {
  4404. lcd_show_fullscreen_message_and_wait_P(
  4405. _i("Choose a filament for the First Layer Calibration and select it in the on-screen menu."));
  4406. }
  4407. else if (cold)
  4408. {
  4409. lcd_show_fullscreen_message_and_wait_P(
  4410. _i("Select temperature which matches your material."));
  4411. }
  4412. lcd_show_fullscreen_message_and_wait_P(
  4413. _i("The printer will start printing a zig-zag line. Rotate the knob until you reach the optimal height. Check the pictures in the handbook (Calibration chapter).")); ////MSG_WIZARD_V2_CAL_2 c=20 r=12
  4414. }
  4415. //! @brief Printer first run wizard (Selftest and calibration)
  4416. //!
  4417. //!
  4418. //! First layer calibration with MMU state diagram
  4419. //!
  4420. //! @startuml
  4421. //! [*] --> IsFil
  4422. //! IsFil : Is any filament loaded?
  4423. //! LoadFilCold : Push the button to start loading Filament 1
  4424. //!
  4425. //! IsFil --> Lay1CalCold : yes
  4426. //! IsFil --> LoadFilCold : no
  4427. //! LoadFilCold --> Lay1CalCold : click
  4428. //! @enduml
  4429. //!
  4430. //! First layer calibration without MMU state diagram
  4431. //!
  4432. //! @startuml
  4433. //! [*] --> IsFil
  4434. //! IsFil : Is filament loaded?
  4435. //! Preheat : Select nozle temperature which matches your material.
  4436. //! LoadFilHot : Insert filament to extruder and press the knob.
  4437. //!
  4438. //! IsFil --> Lay1CalCold : yes
  4439. //! IsFil --> Preheat : no
  4440. //! Preheat --> LoadFilHot : select
  4441. //! LoadFilHot --> Lay1CalHot : click
  4442. //! @enduml
  4443. //!
  4444. //! @param state Entry point of the wizard
  4445. //!
  4446. //! state | description
  4447. //! ---------------------- | ----------------
  4448. //! WizState::Run | Main entry point
  4449. //! WizState::RepeatLay1Cal | Entry point after passing 1st layer calibration
  4450. //! WizState::LoadFilHot | Entry point after temporarily left for preheat before load filament
  4451. void lcd_wizard(WizState state)
  4452. {
  4453. using S = WizState;
  4454. bool end = false;
  4455. int wizard_event;
  4456. const char *msg = NULL;
  4457. // Make sure EEPROM_WIZARD_ACTIVE is true if entering using different entry point
  4458. // other than WizState::Run - it is useful for debugging wizard.
  4459. if (state != S::Run) eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 1);
  4460. FORCE_BL_ON_START;
  4461. while (!end) {
  4462. printf_P(PSTR("Wizard state: %d\n"), state);
  4463. switch (state) {
  4464. case S::Run: //Run wizard?
  4465. // 2019-08-07 brutal hack - solving the "viper" situation.
  4466. // It is caused by the fact, that tmc2130_st_isr makes a crash detection before the printers really starts.
  4467. // And thus it calles stop_and_save_print_to_ram which sets the saved_printing flag.
  4468. // Having this flag set during normal printing is lethal - mesh_plan_buffer_line exist in the middle of planning long travels
  4469. // which results in distorted print.
  4470. // This primarily happens when the printer is new and parked in 0,0
  4471. // So any new printer will fail the first layer calibration unless being reset or the Stop function gets called.
  4472. // We really must find a way to prevent the crash from happening before the printer is started - that would be the correct solution.
  4473. // Btw. the flag may even trigger the viper situation on normal start this way and the user won't be able to find out why.
  4474. saved_printing = false;
  4475. wizard_event = lcd_show_multiscreen_message_yes_no_and_wait_P(_i("Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"), false, true);////MSG_WIZARD_WELCOME c=20 r=7
  4476. if (wizard_event) {
  4477. state = S::Restore;
  4478. eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 1);
  4479. }
  4480. else {
  4481. eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 0);
  4482. end = true;
  4483. }
  4484. break;
  4485. case S::Restore:
  4486. switch (calibration_status()) {
  4487. case CALIBRATION_STATUS_ASSEMBLED: state = S::Selftest; break; //run selftest
  4488. case CALIBRATION_STATUS_XYZ_CALIBRATION: state = S::Xyz; break; //run xyz cal.
  4489. case CALIBRATION_STATUS_Z_CALIBRATION: state = S::Z; break; //run z cal.
  4490. case CALIBRATION_STATUS_LIVE_ADJUST: state = S::IsFil; break; //run live adjust
  4491. case CALIBRATION_STATUS_CALIBRATED: end = true; eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 0); break;
  4492. default: state = S::Selftest; break; //if calibration status is unknown, run wizard from the beginning
  4493. }
  4494. break;
  4495. case S::Selftest:
  4496. lcd_show_fullscreen_message_and_wait_P(_i("First, I will run the selftest to check most common assembly problems."));////MSG_WIZARD_SELFTEST c=20 r=8
  4497. wizard_event = lcd_selftest();
  4498. if (wizard_event) {
  4499. calibration_status_store(CALIBRATION_STATUS_XYZ_CALIBRATION);
  4500. state = S::Xyz;
  4501. }
  4502. else end = true;
  4503. break;
  4504. case S::Xyz:
  4505. lcd_show_fullscreen_message_and_wait_P(_i("I will run xyz calibration now. It will take approx. 12 mins."));////MSG_WIZARD_XYZ_CAL c=20 r=8
  4506. wizard_event = gcode_M45(false, 0);
  4507. if (wizard_event) state = S::IsFil;
  4508. else end = true;
  4509. break;
  4510. case S::Z:
  4511. lcd_show_fullscreen_message_and_wait_P(_i("Please remove shipping helpers first."));
  4512. lcd_show_fullscreen_message_and_wait_P(_i("Now remove the test print from steel sheet."));
  4513. lcd_show_fullscreen_message_and_wait_P(_i("I will run z calibration now."));////MSG_WIZARD_Z_CAL c=20 r=8
  4514. wizard_event = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_STEEL_SHEET_CHECK), false, false);
  4515. if (!wizard_event) lcd_show_fullscreen_message_and_wait_P(_T(MSG_PLACE_STEEL_SHEET));
  4516. wizard_event = gcode_M45(true, 0);
  4517. if (wizard_event) {
  4518. //current filament needs to be unloaded and then new filament should be loaded
  4519. //start to preheat nozzle for unloading remaining PLA filament
  4520. setTargetHotend(PLA_PREHEAT_HOTEND_TEMP, 0);
  4521. lcd_display_message_fullscreen_P(_i("Now I will preheat nozzle for PLA."));
  4522. wait_preheat();
  4523. //unload current filament
  4524. unload_filament();
  4525. //load filament
  4526. lcd_wizard_load();
  4527. setTargetHotend(0, 0); //we are finished, cooldown nozzle
  4528. state = S::Finish; //shipped, no need to set first layer, go to final message directly
  4529. }
  4530. else end = true;
  4531. break;
  4532. case S::IsFil:
  4533. //start to preheat nozzle and bed to save some time later
  4534. setTargetHotend(PLA_PREHEAT_HOTEND_TEMP, 0);
  4535. setTargetBed(PLA_PREHEAT_HPB_TEMP);
  4536. if (mmu_enabled)
  4537. {
  4538. wizard_event = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Is filament loaded?"), true);////c=20 r=2
  4539. } else
  4540. {
  4541. wizard_event = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Is filament loaded?"), true);////MSG_WIZARD_FILAMENT_LOADED c=20 r=2
  4542. }
  4543. if (wizard_event) state = S::Lay1CalCold;
  4544. else
  4545. {
  4546. if(mmu_enabled) state = S::LoadFilCold;
  4547. else state = S::Preheat;
  4548. }
  4549. break;
  4550. case S::Preheat:
  4551. menu_goto(lcd_preheat_menu,0,false,true);
  4552. lcd_show_fullscreen_message_and_wait_P(_i("Select nozzle preheat temperature which matches your material."));
  4553. end = true; // Leave wizard temporarily for lcd_preheat_menu
  4554. break;
  4555. case S::LoadFilHot:
  4556. wait_preheat();
  4557. lcd_wizard_load();
  4558. state = S::Lay1CalHot;
  4559. break;
  4560. case S::LoadFilCold:
  4561. lcd_wizard_load();
  4562. state = S::Lay1CalCold;
  4563. break;
  4564. case S::Lay1CalCold:
  4565. wizard_lay1cal_message(true);
  4566. menu_goto(lcd_v2_calibration,0,false,true);
  4567. end = true; // Leave wizard temporarily for lcd_v2_calibration
  4568. break;
  4569. case S::Lay1CalHot:
  4570. wizard_lay1cal_message(false);
  4571. lcd_commands_type = LcdCommands::Layer1Cal;
  4572. end = true; // Leave wizard temporarily for lcd_v2_calibration
  4573. break;
  4574. case S::RepeatLay1Cal:
  4575. wizard_event = lcd_show_multiscreen_message_yes_no_and_wait_P(_i("Do you want to repeat last step to readjust distance between nozzle and heatbed?"), false);////MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
  4576. if (wizard_event)
  4577. {
  4578. lcd_show_fullscreen_message_and_wait_P(_i("Please clean heatbed and then press the knob."));////MSG_WIZARD_CLEAN_HEATBED c=20 r=8
  4579. state = S::Lay1CalCold;
  4580. }
  4581. else
  4582. {
  4583. lcd_show_fullscreen_message_and_wait_P(_i("If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets."));
  4584. state = S::Finish;
  4585. }
  4586. break;
  4587. case S::Finish:
  4588. eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 0);
  4589. end = true;
  4590. break;
  4591. default: break;
  4592. }
  4593. }
  4594. FORCE_BL_ON_END;
  4595. printf_P(_N("Wizard end state: %d\n"), state);
  4596. switch (state) { //final message
  4597. case S::Restore: //printer was already calibrated
  4598. msg = _T(MSG_WIZARD_DONE);
  4599. break;
  4600. case S::Selftest: //selftest
  4601. case S::Xyz: //xyz cal.
  4602. case S::Z: //z cal.
  4603. msg = _T(MSG_WIZARD_CALIBRATION_FAILED);
  4604. break;
  4605. case S::Finish: //we are finished
  4606. msg = _T(MSG_WIZARD_DONE);
  4607. lcd_reset_alert_level();
  4608. lcd_setstatuspgm(_T(WELCOME_MSG));
  4609. lcd_return_to_status();
  4610. break;
  4611. default:
  4612. msg = _T(MSG_WIZARD_QUIT);
  4613. break;
  4614. }
  4615. if (!((S::Lay1CalCold == state) || (S::Lay1CalHot == state) || (S::Preheat == state)))
  4616. {
  4617. lcd_show_fullscreen_message_and_wait_P(msg);
  4618. }
  4619. lcd_update_enable(true);
  4620. lcd_update(2);
  4621. }
  4622. #ifdef TMC2130
  4623. void lcd_settings_linearity_correction_menu(void)
  4624. {
  4625. MENU_BEGIN();
  4626. ON_MENU_LEAVE(
  4627. lcd_settings_linearity_correction_menu_save();
  4628. );
  4629. MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
  4630. #ifdef TMC2130_LINEARITY_CORRECTION_XYZ
  4631. //tmc2130_wave_fac[X_AXIS]
  4632. MENU_ITEM_EDIT_int3_P(_i("X-correct:"), &tmc2130_wave_fac[X_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_X_CORRECTION c=13
  4633. MENU_ITEM_EDIT_int3_P(_i("Y-correct:"), &tmc2130_wave_fac[Y_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_Y_CORRECTION c=13
  4634. MENU_ITEM_EDIT_int3_P(_i("Z-correct:"), &tmc2130_wave_fac[Z_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_Z_CORRECTION c=13
  4635. #endif //TMC2130_LINEARITY_CORRECTION_XYZ
  4636. MENU_ITEM_EDIT_int3_P(_i("E-correct:"), &tmc2130_wave_fac[E_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_EXTRUDER_CORRECTION c=13
  4637. MENU_END();
  4638. }
  4639. #endif // TMC2130
  4640. #ifdef FILAMENT_SENSOR
  4641. #define SETTINGS_FILAMENT_SENSOR \
  4642. do\
  4643. {\
  4644. if (FSensorStateMenu == 0)\
  4645. {\
  4646. if (fsensor_not_responding && (mmu_enabled == false))\
  4647. {\
  4648. /* Filament sensor not working*/\
  4649. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_NA), lcd_fsensor_state_set);/*////MSG_FSENSOR_NA*/\
  4650. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), NULL, lcd_fsensor_fail);\
  4651. }\
  4652. else\
  4653. {\
  4654. /* Filament sensor turned off, working, no problems*/\
  4655. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_OFF), lcd_fsensor_state_set);\
  4656. if (mmu_enabled == false)\
  4657. {\
  4658. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), NULL, lcd_filament_autoload_info);\
  4659. }\
  4660. }\
  4661. }\
  4662. else\
  4663. {\
  4664. /* Filament sensor turned on, working, no problems*/\
  4665. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_ON), lcd_fsensor_state_set);\
  4666. if (mmu_enabled == false)\
  4667. {\
  4668. if (fsensor_autoload_enabled)\
  4669. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), _T(MSG_ON), lcd_set_filament_autoload);/*////MSG_FSENS_AUTOLOAD_ON c=17 r=1*/\
  4670. else\
  4671. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), _T(MSG_OFF), lcd_set_filament_autoload);/*////MSG_FSENS_AUTOLOAD_OFF c=17 r=1*/\
  4672. /*if (fsensor_oq_meassure_enabled)*/\
  4673. /*MENU_ITEM_FUNCTION_P(_i("F. OQ meass. [on]"), lcd_set_filament_oq_meass);*//*////MSG_FSENS_OQMEASS_ON c=17 r=1*/\
  4674. /*else*/\
  4675. /*MENU_ITEM_FUNCTION_P(_i("F. OQ meass.[off]"), lcd_set_filament_oq_meass);*//*////MSG_FSENS_OQMEASS_OFF c=17 r=1*/\
  4676. }\
  4677. }\
  4678. }\
  4679. while(0)
  4680. #else //FILAMENT_SENSOR
  4681. #define SETTINGS_FILAMENT_SENSOR do{}while(0)
  4682. #endif //FILAMENT_SENSOR
  4683. static void auto_deplete_switch()
  4684. {
  4685. lcd_autoDeplete = !lcd_autoDeplete;
  4686. eeprom_update_byte((unsigned char *)EEPROM_AUTO_DEPLETE, lcd_autoDeplete);
  4687. }
  4688. static void settingsAutoDeplete()
  4689. {
  4690. if (mmu_enabled)
  4691. {
  4692. if (!fsensor_enabled)
  4693. {
  4694. MENU_ITEM_TOGGLE_P(_T(MSG_AUTO_DEPLETE), _T(MSG_NA), NULL);
  4695. }
  4696. else if (lcd_autoDeplete)
  4697. {
  4698. MENU_ITEM_TOGGLE_P(_T(MSG_AUTO_DEPLETE), _T(MSG_ON), auto_deplete_switch);
  4699. }
  4700. else
  4701. {
  4702. MENU_ITEM_TOGGLE_P(_T(MSG_AUTO_DEPLETE), _T(MSG_OFF), auto_deplete_switch);
  4703. }
  4704. }
  4705. }
  4706. #define SETTINGS_AUTO_DEPLETE \
  4707. do\
  4708. {\
  4709. settingsAutoDeplete();\
  4710. }\
  4711. while(0)\
  4712. #ifdef MMU_HAS_CUTTER
  4713. static void settingsCutter()
  4714. {
  4715. if (mmu_enabled)
  4716. {
  4717. if (EEPROM_MMU_CUTTER_ENABLED_enabled == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
  4718. {
  4719. MENU_ITEM_TOGGLE_P(_T(MSG_CUTTER), _T(MSG_ON), lcd_cutter_enabled);
  4720. }
  4721. #ifdef MMU_ALWAYS_CUT
  4722. else if (EEPROM_MMU_CUTTER_ENABLED_always == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
  4723. {
  4724. MENU_ITEM_TOGGLE_P(_T(MSG_CUTTER), _i("Always"), lcd_cutter_enabled);
  4725. }
  4726. #endif
  4727. else
  4728. {
  4729. MENU_ITEM_TOGGLE_P(_T(MSG_CUTTER), _T(MSG_OFF), lcd_cutter_enabled);
  4730. }
  4731. }
  4732. }
  4733. #define SETTINGS_CUTTER \
  4734. do\
  4735. {\
  4736. settingsCutter();\
  4737. }\
  4738. while(0)
  4739. #else
  4740. #define SETTINGS_CUTTER
  4741. #endif //MMU_HAS_CUTTER
  4742. #ifdef TMC2130
  4743. #define SETTINGS_SILENT_MODE \
  4744. do\
  4745. {\
  4746. if(!farm_mode)\
  4747. {\
  4748. if (SilentModeMenu == SILENT_MODE_NORMAL)\
  4749. {\
  4750. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_NORMAL), lcd_silent_mode_set);\
  4751. }\
  4752. else MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_STEALTH), lcd_silent_mode_set);\
  4753. if (SilentModeMenu == SILENT_MODE_NORMAL)\
  4754. {\
  4755. if (lcd_crash_detect_enabled()) MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_ON), crash_mode_switch);\
  4756. else MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_OFF), crash_mode_switch);\
  4757. }\
  4758. else MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), NULL, lcd_crash_mode_info);\
  4759. }\
  4760. }\
  4761. while (0)
  4762. #else //TMC2130
  4763. #define SETTINGS_SILENT_MODE \
  4764. do\
  4765. {\
  4766. if(!farm_mode)\
  4767. {\
  4768. switch (SilentModeMenu)\
  4769. {\
  4770. case SILENT_MODE_POWER:\
  4771. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set);\
  4772. break;\
  4773. case SILENT_MODE_SILENT:\
  4774. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_SILENT), lcd_silent_mode_set);\
  4775. break;\
  4776. case SILENT_MODE_AUTO:\
  4777. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_AUTO_POWER), lcd_silent_mode_set);\
  4778. break;\
  4779. default:\
  4780. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set);\
  4781. break; /* (probably) not needed*/\
  4782. }\
  4783. }\
  4784. }\
  4785. while (0)
  4786. #endif //TMC2130
  4787. #ifndef MMU_FORCE_STEALTH_MODE
  4788. #define SETTINGS_MMU_MODE \
  4789. do\
  4790. {\
  4791. if (mmu_enabled)\
  4792. {\
  4793. if (SilentModeMenu_MMU == 0) MENU_ITEM_TOGGLE_P(_T(MSG_MMU_MODE), _T(MSG_NORMAL), lcd_silent_mode_mmu_set);\
  4794. else MENU_ITEM_TOGGLE_P(_T(MSG_MMU_MODE), _T(MSG_STEALTH), lcd_silent_mode_mmu_set);\
  4795. }\
  4796. }\
  4797. while (0)
  4798. #else //MMU_FORCE_STEALTH_MODE
  4799. #define SETTINGS_MMU_MODE
  4800. #endif //MMU_FORCE_STEALTH_MODE
  4801. #ifdef SDCARD_SORT_ALPHA
  4802. #define SETTINGS_SD \
  4803. do\
  4804. {\
  4805. if (card.ToshibaFlashAir_isEnabled())\
  4806. MENU_ITEM_TOGGLE_P(_T(MSG_SD_CARD), _T(MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY), lcd_toshiba_flash_air_compatibility_toggle);\
  4807. else\
  4808. MENU_ITEM_TOGGLE_P(_T(MSG_SD_CARD), _T(MSG_NORMAL), lcd_toshiba_flash_air_compatibility_toggle);\
  4809. \
  4810. if (!farm_mode)\
  4811. {\
  4812. uint8_t sdSort;\
  4813. EEPROM_read(EEPROM_SD_SORT, (uint8_t*)&sdSort, sizeof(sdSort));\
  4814. switch (sdSort)\
  4815. {\
  4816. case SD_SORT_TIME: MENU_ITEM_TOGGLE_P(_T(MSG_SORT), _T(MSG_SORT_TIME), lcd_sort_type_set); break;\
  4817. case SD_SORT_ALPHA: MENU_ITEM_TOGGLE_P(_T(MSG_SORT), _T(MSG_SORT_ALPHA), lcd_sort_type_set); break;\
  4818. default: MENU_ITEM_TOGGLE_P(_T(MSG_SORT), _T(MSG_NONE), lcd_sort_type_set);\
  4819. }\
  4820. }\
  4821. }\
  4822. while (0)
  4823. #else // SDCARD_SORT_ALPHA
  4824. #define SETTINGS_SD \
  4825. do\
  4826. {\
  4827. if (card.ToshibaFlashAir_isEnabled())\
  4828. MENU_ITEM_TOGGLE_P(_T(MSG_SD_CARD), _T(MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY), lcd_toshiba_flash_air_compatibility_toggle);\
  4829. else\
  4830. MENU_ITEM_TOGGLE_P(_T(MSG_SD_CARD), _T(MSG_NORMAL), lcd_toshiba_flash_air_compatibility_toggle);\
  4831. }\
  4832. while (0)
  4833. #endif // SDCARD_SORT_ALPHA
  4834. /*
  4835. #define SETTINGS_MBL_MODE \
  4836. do\
  4837. {\
  4838. switch(e_mbl_type)\
  4839. {\
  4840. case e_MBL_FAST:\
  4841. MENU_ITEM_FUNCTION_P(_i("Mode [Fast]"),mbl_mode_set);\
  4842. break; \
  4843. case e_MBL_OPTIMAL:\
  4844. MENU_ITEM_FUNCTION_P(_i("Mode [Optimal]"), mbl_mode_set); \
  4845. break; \
  4846. case e_MBL_PREC:\
  4847. MENU_ITEM_FUNCTION_P(_i("Mode [Precise]"), mbl_mode_set); \
  4848. break; \
  4849. default:\
  4850. MENU_ITEM_FUNCTION_P(_i("Mode [Optimal]"), mbl_mode_set); \
  4851. break; \
  4852. }\
  4853. }\
  4854. while (0)
  4855. */
  4856. #define SETTINGS_SOUND \
  4857. do\
  4858. {\
  4859. switch(eSoundMode)\
  4860. {\
  4861. case e_SOUND_MODE_LOUD:\
  4862. MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SOUND_LOUD), lcd_sound_state_set);\
  4863. break;\
  4864. case e_SOUND_MODE_ONCE:\
  4865. MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SOUND_ONCE), lcd_sound_state_set);\
  4866. break;\
  4867. case e_SOUND_MODE_SILENT:\
  4868. MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SILENT), lcd_sound_state_set);\
  4869. break;\
  4870. case e_SOUND_MODE_BLIND:\
  4871. MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SOUND_BLIND), lcd_sound_state_set);\
  4872. break;\
  4873. default:\
  4874. MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SOUND_LOUD), lcd_sound_state_set);\
  4875. }\
  4876. }\
  4877. while (0)
  4878. //-//
  4879. static void lcd_check_mode_set(void)
  4880. {
  4881. switch(oCheckMode)
  4882. {
  4883. case ClCheckMode::_None:
  4884. oCheckMode=ClCheckMode::_Warn;
  4885. break;
  4886. case ClCheckMode::_Warn:
  4887. oCheckMode=ClCheckMode::_Strict;
  4888. break;
  4889. case ClCheckMode::_Strict:
  4890. oCheckMode=ClCheckMode::_None;
  4891. break;
  4892. default:
  4893. oCheckMode=ClCheckMode::_None;
  4894. }
  4895. eeprom_update_byte((uint8_t*)EEPROM_CHECK_MODE,(uint8_t)oCheckMode);
  4896. }
  4897. #define SETTINGS_MODE \
  4898. do\
  4899. {\
  4900. switch(oCheckMode)\
  4901. {\
  4902. case ClCheckMode::_None:\
  4903. MENU_ITEM_TOGGLE_P(_T(MSG_NOZZLE), _T(MSG_NONE), lcd_check_mode_set);\
  4904. break;\
  4905. case ClCheckMode::_Warn:\
  4906. MENU_ITEM_TOGGLE_P(_T(MSG_NOZZLE), _T(MSG_WARN), lcd_check_mode_set);\
  4907. break;\
  4908. case ClCheckMode::_Strict:\
  4909. MENU_ITEM_TOGGLE_P(_T(MSG_NOZZLE), _T(MSG_STRICT), lcd_check_mode_set);\
  4910. break;\
  4911. default:\
  4912. MENU_ITEM_TOGGLE_P(_T(MSG_NOZZLE), _T(MSG_NONE), lcd_check_mode_set);\
  4913. }\
  4914. }\
  4915. while (0)
  4916. static void lcd_nozzle_diameter_set(void)
  4917. {
  4918. uint16_t nDiameter;
  4919. switch(oNozzleDiameter)
  4920. {
  4921. case ClNozzleDiameter::_Diameter_250:
  4922. oNozzleDiameter=ClNozzleDiameter::_Diameter_400;
  4923. nDiameter=400;
  4924. break;
  4925. case ClNozzleDiameter::_Diameter_400:
  4926. oNozzleDiameter=ClNozzleDiameter::_Diameter_600;
  4927. nDiameter=600;
  4928. break;
  4929. case ClNozzleDiameter::_Diameter_600:
  4930. oNozzleDiameter=ClNozzleDiameter::_Diameter_250;
  4931. nDiameter=250;
  4932. break;
  4933. default:
  4934. oNozzleDiameter=ClNozzleDiameter::_Diameter_400;
  4935. nDiameter=400;
  4936. }
  4937. eeprom_update_byte((uint8_t*)EEPROM_NOZZLE_DIAMETER,(uint8_t)oNozzleDiameter);
  4938. eeprom_update_word((uint16_t*)EEPROM_NOZZLE_DIAMETER_uM,nDiameter);
  4939. }
  4940. #define SETTINGS_NOZZLE \
  4941. do\
  4942. {\
  4943. float fNozzleDiam;\
  4944. switch(oNozzleDiameter)\
  4945. {\
  4946. case ClNozzleDiameter::_Diameter_250: fNozzleDiam = 0.25f; break;\
  4947. case ClNozzleDiameter::_Diameter_400: fNozzleDiam = 0.4f; break;\
  4948. case ClNozzleDiameter::_Diameter_600: fNozzleDiam = 0.6f; break;\
  4949. default: fNozzleDiam = 0.4f; break;\
  4950. }\
  4951. MENU_ITEM_TOGGLE(_T(MSG_NOZZLE_DIAMETER), ftostr12ns(fNozzleDiam), lcd_nozzle_diameter_set);\
  4952. }\
  4953. while (0)
  4954. static void lcd_check_model_set(void)
  4955. {
  4956. switch(oCheckModel)
  4957. {
  4958. case ClCheckModel::_None:
  4959. oCheckModel=ClCheckModel::_Warn;
  4960. break;
  4961. case ClCheckModel::_Warn:
  4962. oCheckModel=ClCheckModel::_Strict;
  4963. break;
  4964. case ClCheckModel::_Strict:
  4965. oCheckModel=ClCheckModel::_None;
  4966. break;
  4967. default:
  4968. oCheckModel=ClCheckModel::_None;
  4969. }
  4970. eeprom_update_byte((uint8_t*)EEPROM_CHECK_MODEL,(uint8_t)oCheckModel);
  4971. }
  4972. #define SETTINGS_MODEL \
  4973. do\
  4974. {\
  4975. switch(oCheckModel)\
  4976. {\
  4977. case ClCheckModel::_None:\
  4978. MENU_ITEM_TOGGLE_P(_T(MSG_MODEL), _T(MSG_NONE), lcd_check_model_set);\
  4979. break;\
  4980. case ClCheckModel::_Warn:\
  4981. MENU_ITEM_TOGGLE_P(_T(MSG_MODEL), _T(MSG_WARN), lcd_check_model_set);\
  4982. break;\
  4983. case ClCheckModel::_Strict:\
  4984. MENU_ITEM_TOGGLE_P(_T(MSG_MODEL), _T(MSG_STRICT), lcd_check_model_set);\
  4985. break;\
  4986. default:\
  4987. MENU_ITEM_TOGGLE_P(_T(MSG_MODEL), _T(MSG_NONE), lcd_check_model_set);\
  4988. }\
  4989. }\
  4990. while (0)
  4991. static void lcd_check_version_set(void)
  4992. {
  4993. switch(oCheckVersion)
  4994. {
  4995. case ClCheckVersion::_None:
  4996. oCheckVersion=ClCheckVersion::_Warn;
  4997. break;
  4998. case ClCheckVersion::_Warn:
  4999. oCheckVersion=ClCheckVersion::_Strict;
  5000. break;
  5001. case ClCheckVersion::_Strict:
  5002. oCheckVersion=ClCheckVersion::_None;
  5003. break;
  5004. default:
  5005. oCheckVersion=ClCheckVersion::_None;
  5006. }
  5007. eeprom_update_byte((uint8_t*)EEPROM_CHECK_VERSION,(uint8_t)oCheckVersion);
  5008. }
  5009. #define SETTINGS_VERSION \
  5010. do\
  5011. {\
  5012. switch(oCheckVersion)\
  5013. {\
  5014. case ClCheckVersion::_None:\
  5015. MENU_ITEM_TOGGLE_P(_T(MSG_FIRMWARE), _T(MSG_NONE), lcd_check_version_set);\
  5016. break;\
  5017. case ClCheckVersion::_Warn:\
  5018. MENU_ITEM_TOGGLE_P(_T(MSG_FIRMWARE), _T(MSG_WARN), lcd_check_version_set);\
  5019. break;\
  5020. case ClCheckVersion::_Strict:\
  5021. MENU_ITEM_TOGGLE_P(_T(MSG_FIRMWARE), _T(MSG_STRICT), lcd_check_version_set);\
  5022. break;\
  5023. default:\
  5024. MENU_ITEM_TOGGLE_P(_T(MSG_FIRMWARE), _T(MSG_NONE), lcd_check_version_set);\
  5025. }\
  5026. }\
  5027. while (0)
  5028. #if 0 // temporarily unused
  5029. static void lcd_check_gcode_set(void)
  5030. {
  5031. switch(oCheckGcode)
  5032. {
  5033. case ClCheckGcode::_None:
  5034. oCheckGcode=ClCheckGcode::_Warn;
  5035. break;
  5036. case ClCheckGcode::_Warn:
  5037. oCheckGcode=ClCheckGcode::_Strict;
  5038. break;
  5039. case ClCheckGcode::_Strict:
  5040. oCheckGcode=ClCheckGcode::_None;
  5041. break;
  5042. default:
  5043. oCheckGcode=ClCheckGcode::_None;
  5044. }
  5045. eeprom_update_byte((uint8_t*)EEPROM_CHECK_GCODE,(uint8_t)oCheckGcode);
  5046. }
  5047. #endif
  5048. #define SETTINGS_GCODE \
  5049. do\
  5050. {\
  5051. switch(oCheckGcode)\
  5052. {\
  5053. case ClCheckGcode::_None:\
  5054. MENU_ITEM_TOGGLE_P(_T(MSG_GCODE), _T(MSG_NONE), lcd_check_gcode_set);\
  5055. break;\
  5056. case ClCheckGcode::_Warn:\
  5057. MENU_ITEM_TOGGLE_P(_T(MSG_GCODE), _T(MSG_WARN), lcd_check_gcode_set);\
  5058. break;\
  5059. case ClCheckGcode::_Strict:\
  5060. MENU_ITEM_TOGGLE_P(_T(MSG_GCODE), _T(MSG_STRICT), lcd_check_gcode_set);\
  5061. break;\
  5062. default:\
  5063. MENU_ITEM_TOGGLE_P(_T(MSG_GCODE), _T(MSG_NONE), lcd_check_gcode_set);\
  5064. }\
  5065. }\
  5066. while (0)
  5067. static void lcd_checking_menu(void)
  5068. {
  5069. MENU_BEGIN();
  5070. MENU_ITEM_BACK_P(_T(MSG_HW_SETUP));
  5071. SETTINGS_MODE;
  5072. SETTINGS_MODEL;
  5073. SETTINGS_VERSION;
  5074. //-// temporarily disabled
  5075. //SETTINGS_GCODE;
  5076. MENU_END();
  5077. }
  5078. #ifdef IR_SENSOR_ANALOG
  5079. static void lcd_fsensor_actionNA_set(void)
  5080. {
  5081. switch(oFsensorActionNA)
  5082. {
  5083. case ClFsensorActionNA::_Continue:
  5084. oFsensorActionNA=ClFsensorActionNA::_Pause;
  5085. break;
  5086. case ClFsensorActionNA::_Pause:
  5087. oFsensorActionNA=ClFsensorActionNA::_Continue;
  5088. break;
  5089. default:
  5090. oFsensorActionNA=ClFsensorActionNA::_Continue;
  5091. }
  5092. eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_ACTION_NA,(uint8_t)oFsensorActionNA);
  5093. }
  5094. #define FSENSOR_ACTION_NA \
  5095. do\
  5096. {\
  5097. switch(oFsensorActionNA)\
  5098. {\
  5099. case ClFsensorActionNA::_Continue:\
  5100. MENU_ITEM_TOGGLE_P(_T(MSG_FS_ACTION), _T(MSG_FS_CONTINUE), lcd_fsensor_actionNA_set);\
  5101. break;\
  5102. case ClFsensorActionNA::_Pause:\
  5103. MENU_ITEM_TOGGLE_P(_T(MSG_FS_ACTION), _T(MSG_FS_PAUSE), lcd_fsensor_actionNA_set);\
  5104. break;\
  5105. default:\
  5106. oFsensorActionNA=ClFsensorActionNA::_Continue;\
  5107. }\
  5108. }\
  5109. while (0)
  5110. #endif //IR_SENSOR_ANALOG
  5111. template <uint8_t number>
  5112. static void select_sheet_menu()
  5113. {
  5114. selected_sheet = number;
  5115. lcd_sheet_menu();
  5116. }
  5117. static void sheets_menu()
  5118. {
  5119. MENU_BEGIN();
  5120. MENU_ITEM_BACK_P(_i("HW Setup"));
  5121. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[0], select_sheet_menu<0>);
  5122. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[1], select_sheet_menu<1>);
  5123. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[2], select_sheet_menu<2>);
  5124. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[3], select_sheet_menu<3>);
  5125. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[4], select_sheet_menu<4>);
  5126. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[5], select_sheet_menu<5>);
  5127. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[6], select_sheet_menu<6>);
  5128. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[7], select_sheet_menu<7>);
  5129. MENU_END();
  5130. }
  5131. void lcd_hw_setup_menu(void) // can not be "static"
  5132. {
  5133. typedef struct
  5134. {// 2bytes total
  5135. int8_t status;
  5136. uint8_t experimental_menu_visibility;
  5137. } _menu_data_t;
  5138. static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
  5139. _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
  5140. if (_md->status == 0 || lcd_draw_update)
  5141. {
  5142. _md->status = 1;
  5143. _md->experimental_menu_visibility = eeprom_read_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY);
  5144. if (_md->experimental_menu_visibility == EEPROM_EMPTY_VALUE)
  5145. {
  5146. _md->experimental_menu_visibility = 0;
  5147. eeprom_update_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY, _md->experimental_menu_visibility);
  5148. }
  5149. }
  5150. MENU_BEGIN();
  5151. MENU_ITEM_BACK_P(_T(bSettings?MSG_SETTINGS:MSG_BACK)); // i.e. default menu-item / menu-item after checking mismatch
  5152. MENU_ITEM_SUBMENU_P(_i("Steel sheets"), sheets_menu); ////MSG_STEEL_SHEETS c=18
  5153. SETTINGS_NOZZLE;
  5154. MENU_ITEM_SUBMENU_P(_i("Checks"), lcd_checking_menu);
  5155. #ifdef IR_SENSOR_ANALOG
  5156. FSENSOR_ACTION_NA;
  5157. //! Fsensor Detection isn't ready for mmu yet it is temporarily disabled.
  5158. //! @todo Don't forget to remove this as soon Fsensor Detection works with mmu
  5159. if(!mmu_enabled) MENU_ITEM_FUNCTION_P(PSTR("Fsensor Detection"), lcd_detect_IRsensor);
  5160. #endif //IR_SENSOR_ANALOG
  5161. if (_md->experimental_menu_visibility)
  5162. {
  5163. MENU_ITEM_SUBMENU_P(PSTR("Experimental"), lcd_experimental_menu);////MSG_MENU_EXPERIMENTAL c=18
  5164. }
  5165. MENU_END();
  5166. }
  5167. static void lcd_settings_menu()
  5168. {
  5169. EEPROM_read(EEPROM_SILENT, (uint8_t*)&SilentModeMenu, sizeof(SilentModeMenu));
  5170. MENU_BEGIN();
  5171. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5172. MENU_ITEM_SUBMENU_P(_i("Temperature"), lcd_control_temperature_menu);////MSG_TEMPERATURE
  5173. if (!homing_flag)
  5174. MENU_ITEM_SUBMENU_P(_i("Move axis"), lcd_move_menu_1mm);////MSG_MOVE_AXIS
  5175. if (!isPrintPaused)
  5176. MENU_ITEM_GCODE_P(_i("Disable steppers"), PSTR("M84"));////MSG_DISABLE_STEPPERS
  5177. SETTINGS_FILAMENT_SENSOR;
  5178. SETTINGS_AUTO_DEPLETE;
  5179. SETTINGS_CUTTER;
  5180. MENU_ITEM_TOGGLE_P(_i("Fans check"), fans_check_enabled ? _T(MSG_ON) : _T(MSG_OFF), lcd_set_fan_check);
  5181. SETTINGS_SILENT_MODE;
  5182. if(!farm_mode)
  5183. {
  5184. bSettings=true; // flag ('fake parameter') for 'lcd_hw_setup_menu()' function
  5185. MENU_ITEM_SUBMENU_P(_i("HW Setup"), lcd_hw_setup_menu);////MSG_HW_SETUP
  5186. }
  5187. SETTINGS_MMU_MODE;
  5188. MENU_ITEM_SUBMENU_P(_i("Mesh bed leveling"), lcd_mesh_bed_leveling_settings);////MSG_MBL_SETTINGS c=18 r=1
  5189. #if defined (TMC2130) && defined (LINEARITY_CORRECTION)
  5190. MENU_ITEM_SUBMENU_P(_i("Lin. correction"), lcd_settings_linearity_correction_menu);
  5191. #endif //LINEARITY_CORRECTION && TMC2130
  5192. if(has_temperature_compensation())
  5193. {
  5194. MENU_ITEM_TOGGLE_P(_T(MSG_TEMP_CALIBRATION), eeprom_read_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE) ? _T(MSG_ON) : _T(MSG_OFF), lcd_temp_calibration_set);
  5195. }
  5196. #ifdef HAS_SECOND_SERIAL_PORT
  5197. MENU_ITEM_TOGGLE_P(_T(MSG_RPI_PORT), (selectedSerialPort == 0) ? _T(MSG_OFF) : _T(MSG_ON), lcd_second_serial_set);
  5198. #endif //HAS_SECOND_SERIAL
  5199. if (!isPrintPaused && !homing_flag)
  5200. MENU_ITEM_SUBMENU_P(_T(MSG_BABYSTEP_Z), lcd_babystep_z);
  5201. #if (LANG_MODE != 0)
  5202. MENU_ITEM_SUBMENU_P(_i("Select language"), lcd_language_menu);////MSG_LANGUAGE_SELECT
  5203. #endif //(LANG_MODE != 0)
  5204. SETTINGS_SD;
  5205. SETTINGS_SOUND;
  5206. #ifdef LCD_BL_PIN
  5207. if (backlightSupport)
  5208. {
  5209. MENU_ITEM_SUBMENU_P(_T(MSG_BRIGHTNESS), lcd_backlight_menu);
  5210. }
  5211. #endif //LCD_BL_PIN
  5212. if (farm_mode)
  5213. {
  5214. MENU_ITEM_SUBMENU_P(PSTR("Farm number"), lcd_farm_no);
  5215. MENU_ITEM_FUNCTION_P(PSTR("Disable farm mode"), lcd_disable_farm_mode);
  5216. }
  5217. MENU_END();
  5218. }
  5219. #ifdef TMC2130
  5220. static void lcd_ustep_linearity_menu_save()
  5221. {
  5222. eeprom_update_byte((uint8_t*)EEPROM_TMC2130_WAVE_X_FAC, tmc2130_wave_fac[X_AXIS]);
  5223. eeprom_update_byte((uint8_t*)EEPROM_TMC2130_WAVE_Y_FAC, tmc2130_wave_fac[Y_AXIS]);
  5224. eeprom_update_byte((uint8_t*)EEPROM_TMC2130_WAVE_Z_FAC, tmc2130_wave_fac[Z_AXIS]);
  5225. eeprom_update_byte((uint8_t*)EEPROM_TMC2130_WAVE_E_FAC, tmc2130_wave_fac[E_AXIS]);
  5226. }
  5227. #endif //TMC2130
  5228. #ifdef TMC2130
  5229. static void lcd_settings_linearity_correction_menu_save()
  5230. {
  5231. bool changed = false;
  5232. if (tmc2130_wave_fac[X_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[X_AXIS] = 0;
  5233. if (tmc2130_wave_fac[Y_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[Y_AXIS] = 0;
  5234. if (tmc2130_wave_fac[Z_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[Z_AXIS] = 0;
  5235. if (tmc2130_wave_fac[E_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[E_AXIS] = 0;
  5236. changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_X_FAC) != tmc2130_wave_fac[X_AXIS]);
  5237. changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_Y_FAC) != tmc2130_wave_fac[Y_AXIS]);
  5238. changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_Z_FAC) != tmc2130_wave_fac[Z_AXIS]);
  5239. changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_E_FAC) != tmc2130_wave_fac[E_AXIS]);
  5240. lcd_ustep_linearity_menu_save();
  5241. if (changed) tmc2130_init();
  5242. }
  5243. #endif //TMC2130
  5244. static void lcd_calibration_menu()
  5245. {
  5246. MENU_BEGIN();
  5247. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5248. if (!isPrintPaused)
  5249. {
  5250. MENU_ITEM_FUNCTION_P(_i("Wizard"), lcd_wizard);////MSG_WIZARD c=17 r=1
  5251. if (lcd_commands_type == LcdCommands::Idle)
  5252. {
  5253. MENU_ITEM_SUBMENU_P(_T(MSG_V2_CALIBRATION), lcd_first_layer_calibration_reset);////MSG_V2_CALIBRATION c=18
  5254. }
  5255. MENU_ITEM_GCODE_P(_T(MSG_AUTO_HOME), PSTR("G28 W"));
  5256. #ifdef TMC2130
  5257. MENU_ITEM_FUNCTION_P(_i("Belt test "), lcd_belttest_v);////MSG_BELTTEST c=17
  5258. #endif //TMC2130
  5259. MENU_ITEM_FUNCTION_P(_i("Selftest "), lcd_selftest_v);////MSG_SELFTEST c=17
  5260. #ifdef MK1BP
  5261. // MK1
  5262. // "Calibrate Z"
  5263. MENU_ITEM_GCODE_P(_T(MSG_HOMEYZ), PSTR("G28 Z"));
  5264. #else //MK1BP
  5265. // MK2
  5266. MENU_ITEM_FUNCTION_P(_i("Calibrate XYZ"), lcd_mesh_calibration);////MSG_CALIBRATE_BED
  5267. // "Calibrate Z" with storing the reference values to EEPROM.
  5268. MENU_ITEM_SUBMENU_P(_T(MSG_HOMEYZ), lcd_mesh_calibration_z);
  5269. #ifndef SNMM
  5270. //MENU_ITEM_FUNCTION_P(_i("Calibrate E"), lcd_calibrate_extruder);////MSG_CALIBRATE_E c=20 r=1
  5271. #endif
  5272. // "Mesh Bed Leveling"
  5273. MENU_ITEM_SUBMENU_P(_i("Mesh Bed Leveling"), lcd_mesh_bedleveling);////MSG_MESH_BED_LEVELING
  5274. #endif //MK1BP
  5275. MENU_ITEM_SUBMENU_P(_i("Bed level correct"), lcd_adjust_bed);////MSG_BED_CORRECTION_MENU
  5276. MENU_ITEM_SUBMENU_P(_i("PID calibration"), pid_extruder);////MSG_PID_EXTRUDER c=17 r=1
  5277. #ifndef TMC2130
  5278. MENU_ITEM_SUBMENU_P(_i("Show end stops"), menu_show_end_stops);////MSG_SHOW_END_STOPS c=18
  5279. #endif
  5280. #ifndef MK1BP
  5281. MENU_ITEM_GCODE_P(_i("Reset XYZ calibr."), PSTR("M44"));////MSG_CALIBRATE_BED_RESET
  5282. #endif //MK1BP
  5283. #ifndef SNMM
  5284. //MENU_ITEM_FUNCTION_P(MSG_RESET_CALIBRATE_E, lcd_extr_cal_reset);
  5285. #endif
  5286. #ifndef MK1BP
  5287. if(has_temperature_compensation())
  5288. {
  5289. MENU_ITEM_SUBMENU_P(_i("Temp. calibration"), lcd_pinda_calibration_menu);////MSG_CALIBRATION_PINDA_MENU c=17 r=1
  5290. }
  5291. #endif //MK1BP
  5292. }
  5293. MENU_END();
  5294. }
  5295. void bowden_menu() {
  5296. int enc_dif = lcd_encoder_diff;
  5297. int cursor_pos = 0;
  5298. lcd_clear();
  5299. lcd_set_cursor(0, 0);
  5300. lcd_print(">");
  5301. for (uint_least8_t i = 0; i < 4; i++) {
  5302. lcd_set_cursor(1, i);
  5303. lcd_print("Extruder ");
  5304. lcd_print(i);
  5305. lcd_print(": ");
  5306. EEPROM_read_B(EEPROM_BOWDEN_LENGTH + i * 2, &bowden_length[i]);
  5307. lcd_print(bowden_length[i] - 48);
  5308. }
  5309. enc_dif = lcd_encoder_diff;
  5310. lcd_consume_click();
  5311. while (1) {
  5312. manage_heater();
  5313. manage_inactivity(true);
  5314. if (abs((enc_dif - lcd_encoder_diff)) > 2) {
  5315. if (enc_dif > lcd_encoder_diff) {
  5316. cursor_pos--;
  5317. }
  5318. if (enc_dif < lcd_encoder_diff) {
  5319. cursor_pos++;
  5320. }
  5321. if (cursor_pos > 3) {
  5322. cursor_pos = 3;
  5323. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5324. }
  5325. if (cursor_pos < 0) {
  5326. cursor_pos = 0;
  5327. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5328. }
  5329. lcd_set_cursor(0, 0);
  5330. lcd_print(" ");
  5331. lcd_set_cursor(0, 1);
  5332. lcd_print(" ");
  5333. lcd_set_cursor(0, 2);
  5334. lcd_print(" ");
  5335. lcd_set_cursor(0, 3);
  5336. lcd_print(" ");
  5337. lcd_set_cursor(0, cursor_pos);
  5338. lcd_print(">");
  5339. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  5340. enc_dif = lcd_encoder_diff;
  5341. _delay(100);
  5342. }
  5343. if (lcd_clicked()) {
  5344. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5345. lcd_clear();
  5346. while (1) {
  5347. manage_heater();
  5348. manage_inactivity(true);
  5349. lcd_set_cursor(1, 1);
  5350. lcd_print("Extruder ");
  5351. lcd_print(cursor_pos);
  5352. lcd_print(": ");
  5353. lcd_set_cursor(13, 1);
  5354. lcd_print(bowden_length[cursor_pos] - 48);
  5355. if (abs((enc_dif - lcd_encoder_diff)) > 2) {
  5356. if (enc_dif > lcd_encoder_diff) {
  5357. bowden_length[cursor_pos]--;
  5358. lcd_set_cursor(13, 1);
  5359. lcd_print(bowden_length[cursor_pos] - 48);
  5360. enc_dif = lcd_encoder_diff;
  5361. }
  5362. if (enc_dif < lcd_encoder_diff) {
  5363. bowden_length[cursor_pos]++;
  5364. lcd_set_cursor(13, 1);
  5365. lcd_print(bowden_length[cursor_pos] - 48);
  5366. enc_dif = lcd_encoder_diff;
  5367. }
  5368. }
  5369. _delay(100);
  5370. if (lcd_clicked()) {
  5371. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5372. EEPROM_save_B(EEPROM_BOWDEN_LENGTH + cursor_pos * 2, &bowden_length[cursor_pos]);
  5373. if (lcd_show_fullscreen_message_yes_no_and_wait_P(PSTR("Continue with another bowden?"))) {
  5374. lcd_update_enable(true);
  5375. lcd_clear();
  5376. enc_dif = lcd_encoder_diff;
  5377. lcd_set_cursor(0, cursor_pos);
  5378. lcd_print(">");
  5379. for (uint_least8_t i = 0; i < 4; i++) {
  5380. lcd_set_cursor(1, i);
  5381. lcd_print("Extruder ");
  5382. lcd_print(i);
  5383. lcd_print(": ");
  5384. EEPROM_read_B(EEPROM_BOWDEN_LENGTH + i * 2, &bowden_length[i]);
  5385. lcd_print(bowden_length[i] - 48);
  5386. }
  5387. break;
  5388. }
  5389. else return;
  5390. }
  5391. }
  5392. }
  5393. }
  5394. }
  5395. #ifdef SNMM
  5396. static char snmm_stop_print_menu() { //menu for choosing which filaments will be unloaded in stop print
  5397. lcd_clear();
  5398. lcd_puts_at_P(0,0,_T(MSG_UNLOAD_FILAMENT)); lcd_print(":");
  5399. lcd_set_cursor(0, 1); lcd_print(">");
  5400. lcd_puts_at_P(1,2,_i("Used during print"));////MSG_USED c=19 r=1
  5401. lcd_puts_at_P(1,3,_i("Current"));////MSG_CURRENT c=19 r=1
  5402. char cursor_pos = 1;
  5403. int enc_dif = 0;
  5404. KEEPALIVE_STATE(PAUSED_FOR_USER);
  5405. lcd_consume_click();
  5406. while (1) {
  5407. manage_heater();
  5408. manage_inactivity(true);
  5409. if (abs((enc_dif - lcd_encoder_diff)) > 4) {
  5410. if ((abs(enc_dif - lcd_encoder_diff)) > 1) {
  5411. if (enc_dif > lcd_encoder_diff) cursor_pos--;
  5412. if (enc_dif < lcd_encoder_diff) cursor_pos++;
  5413. if (cursor_pos > 3) {
  5414. cursor_pos = 3;
  5415. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5416. }
  5417. if (cursor_pos < 1){
  5418. cursor_pos = 1;
  5419. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5420. }
  5421. lcd_set_cursor(0, 1);
  5422. lcd_print(" ");
  5423. lcd_set_cursor(0, 2);
  5424. lcd_print(" ");
  5425. lcd_set_cursor(0, 3);
  5426. lcd_print(" ");
  5427. lcd_set_cursor(0, cursor_pos);
  5428. lcd_print(">");
  5429. enc_dif = lcd_encoder_diff;
  5430. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  5431. _delay(100);
  5432. }
  5433. }
  5434. if (lcd_clicked()) {
  5435. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5436. KEEPALIVE_STATE(IN_HANDLER);
  5437. return(cursor_pos - 1);
  5438. }
  5439. }
  5440. }
  5441. #endif //SNMM
  5442. //! @brief Select one of numbered items
  5443. //!
  5444. //! Create list of items with header. Header can not be selected.
  5445. //! Each item has text description passed by function parameter and
  5446. //! number. There are 5 numbered items, if mmu_enabled, 4 otherwise.
  5447. //! Items are numbered from 1 to 4 or 5. But index returned starts at 0.
  5448. //! There can be last item with different text and no number.
  5449. //!
  5450. //! @param header Header text
  5451. //! @param item Item text
  5452. //! @param last_item Last item text, or nullptr if there is no Last item
  5453. //! @return selected item index, first item index is 0
  5454. uint8_t choose_menu_P(const char *header, const char *item, const char *last_item)
  5455. {
  5456. //following code should handle 3 to 127 number of items well
  5457. const int8_t items_no = last_item?(mmu_enabled?6:5):(mmu_enabled?5:4);
  5458. const uint8_t item_len = item?strlen_P(item):0;
  5459. int8_t first = 0;
  5460. int8_t enc_dif = lcd_encoder_diff;
  5461. int8_t cursor_pos = 1;
  5462. lcd_clear();
  5463. KEEPALIVE_STATE(PAUSED_FOR_USER);
  5464. while (1)
  5465. {
  5466. manage_heater();
  5467. manage_inactivity(true);
  5468. if (abs((enc_dif - lcd_encoder_diff)) > 4)
  5469. {
  5470. if (enc_dif > lcd_encoder_diff)
  5471. {
  5472. cursor_pos--;
  5473. }
  5474. if (enc_dif < lcd_encoder_diff)
  5475. {
  5476. cursor_pos++;
  5477. }
  5478. enc_dif = lcd_encoder_diff;
  5479. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  5480. }
  5481. if (cursor_pos > 3)
  5482. {
  5483. cursor_pos = 3;
  5484. if (first < items_no - 3)
  5485. {
  5486. first++;
  5487. lcd_clear();
  5488. } else { // here we are at the very end of the list
  5489. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5490. }
  5491. }
  5492. if (cursor_pos < 1)
  5493. {
  5494. cursor_pos = 1;
  5495. if (first > 0)
  5496. {
  5497. first--;
  5498. lcd_clear();
  5499. } else { // here we are at the very end of the list
  5500. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5501. }
  5502. }
  5503. if (header) lcd_puts_at_P(0,0,header);
  5504. const bool last_visible = (first == items_no - 3);
  5505. const uint_least8_t ordinary_items = (last_item&&last_visible)?2:3;
  5506. for (uint_least8_t i = 0; i < ordinary_items; i++)
  5507. {
  5508. if (item) lcd_puts_at_P(1, i + 1, item);
  5509. }
  5510. for (uint_least8_t i = 0; i < ordinary_items; i++)
  5511. {
  5512. lcd_set_cursor(2 + item_len, i+1);
  5513. lcd_print(first + i + 1);
  5514. }
  5515. if (last_item&&last_visible) lcd_puts_at_P(1, 3, last_item);
  5516. lcd_set_cursor(0, 1);
  5517. lcd_print(" ");
  5518. lcd_set_cursor(0, 2);
  5519. lcd_print(" ");
  5520. lcd_set_cursor(0, 3);
  5521. lcd_print(" ");
  5522. lcd_set_cursor(0, cursor_pos);
  5523. lcd_print(">");
  5524. _delay(100);
  5525. if (lcd_clicked())
  5526. {
  5527. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5528. KEEPALIVE_STATE(IN_HANDLER);
  5529. lcd_encoder_diff = 0;
  5530. return(cursor_pos + first - 1);
  5531. }
  5532. }
  5533. }
  5534. char reset_menu() {
  5535. #ifdef SNMM
  5536. int items_no = 5;
  5537. #else
  5538. int items_no = 4;
  5539. #endif
  5540. static int first = 0;
  5541. int enc_dif = 0;
  5542. char cursor_pos = 0;
  5543. const char *item [items_no];
  5544. item[0] = "Language";
  5545. item[1] = "Statistics";
  5546. item[2] = "Shipping prep";
  5547. item[3] = "All Data";
  5548. #ifdef SNMM
  5549. item[4] = "Bowden length";
  5550. #endif // SNMM
  5551. enc_dif = lcd_encoder_diff;
  5552. lcd_clear();
  5553. lcd_set_cursor(0, 0);
  5554. lcd_print(">");
  5555. lcd_consume_click();
  5556. while (1) {
  5557. for (uint_least8_t i = 0; i < 4; i++) {
  5558. lcd_set_cursor(1, i);
  5559. lcd_print(item[first + i]);
  5560. }
  5561. manage_heater();
  5562. manage_inactivity(true);
  5563. if (abs((enc_dif - lcd_encoder_diff)) > 4) {
  5564. if ((abs(enc_dif - lcd_encoder_diff)) > 1) {
  5565. if (enc_dif > lcd_encoder_diff) {
  5566. cursor_pos--;
  5567. }
  5568. if (enc_dif < lcd_encoder_diff) {
  5569. cursor_pos++;
  5570. }
  5571. if (cursor_pos > 3) {
  5572. cursor_pos = 3;
  5573. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5574. if (first < items_no - 4) {
  5575. first++;
  5576. lcd_clear();
  5577. }
  5578. }
  5579. if (cursor_pos < 0) {
  5580. cursor_pos = 0;
  5581. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5582. if (first > 0) {
  5583. first--;
  5584. lcd_clear();
  5585. }
  5586. }
  5587. lcd_set_cursor(0, 0);
  5588. lcd_print(" ");
  5589. lcd_set_cursor(0, 1);
  5590. lcd_print(" ");
  5591. lcd_set_cursor(0, 2);
  5592. lcd_print(" ");
  5593. lcd_set_cursor(0, 3);
  5594. lcd_print(" ");
  5595. lcd_set_cursor(0, cursor_pos);
  5596. lcd_print(">");
  5597. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  5598. enc_dif = lcd_encoder_diff;
  5599. _delay(100);
  5600. }
  5601. }
  5602. if (lcd_clicked()) {
  5603. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5604. return(cursor_pos + first);
  5605. }
  5606. }
  5607. }
  5608. static void lcd_disable_farm_mode()
  5609. {
  5610. int8_t disable = lcd_show_fullscreen_message_yes_no_and_wait_P(PSTR("Disable farm mode?"), true, false); //allow timeouting, default no
  5611. if (disable)
  5612. {
  5613. enquecommand_P(PSTR("G99"));
  5614. lcd_return_to_status();
  5615. }
  5616. lcd_update_enable(true);
  5617. lcd_draw_update = 2;
  5618. }
  5619. static void fil_load_menu()
  5620. {
  5621. MENU_BEGIN();
  5622. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5623. MENU_ITEM_FUNCTION_P(_i("Load all"), load_all); ////MSG_LOAD_ALL c=17
  5624. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '1', extr_adj, 0); ////MSG_LOAD_FILAMENT_1 c=16
  5625. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '2', extr_adj, 1); ////MSG_LOAD_FILAMENT_2 c=17
  5626. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '3', extr_adj, 2); ////MSG_LOAD_FILAMENT_3 c=17
  5627. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '4', extr_adj, 3); ////MSG_LOAD_FILAMENT_4 c=17
  5628. if (mmu_enabled)
  5629. {
  5630. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '5', extr_adj, 4);
  5631. }
  5632. MENU_END();
  5633. }
  5634. static void mmu_load_to_nozzle_menu()
  5635. {
  5636. if (bFilamentAction)
  5637. {
  5638. MENU_BEGIN();
  5639. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5640. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '1', lcd_mmu_load_to_nozzle, 0);
  5641. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '2', lcd_mmu_load_to_nozzle, 1);
  5642. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '3', lcd_mmu_load_to_nozzle, 2);
  5643. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '4', lcd_mmu_load_to_nozzle, 3);
  5644. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '5', lcd_mmu_load_to_nozzle, 4);
  5645. MENU_END();
  5646. }
  5647. else
  5648. {
  5649. eFilamentAction = FilamentAction::MmuLoad;
  5650. preheat_or_continue();
  5651. }
  5652. }
  5653. static void mmu_eject_filament(uint8_t filament)
  5654. {
  5655. menu_back();
  5656. mmu_eject_filament(filament, true);
  5657. }
  5658. static void mmu_fil_eject_menu()
  5659. {
  5660. if (bFilamentAction)
  5661. {
  5662. MENU_BEGIN();
  5663. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5664. MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '1', mmu_eject_filament, 0);
  5665. MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '2', mmu_eject_filament, 1);
  5666. MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '3', mmu_eject_filament, 2);
  5667. MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '4', mmu_eject_filament, 3);
  5668. MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '5', mmu_eject_filament, 4);
  5669. MENU_END();
  5670. }
  5671. else
  5672. {
  5673. eFilamentAction = FilamentAction::MmuEject;
  5674. preheat_or_continue();
  5675. }
  5676. }
  5677. #ifdef MMU_HAS_CUTTER
  5678. static void mmu_cut_filament_menu()
  5679. {
  5680. if(bFilamentAction)
  5681. {
  5682. MENU_BEGIN();
  5683. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5684. MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '1', mmu_cut_filament, 0);
  5685. MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '2', mmu_cut_filament, 1);
  5686. MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '3', mmu_cut_filament, 2);
  5687. MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '4', mmu_cut_filament, 3);
  5688. MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '5', mmu_cut_filament, 4);
  5689. MENU_END();
  5690. }
  5691. else
  5692. {
  5693. eFilamentAction=FilamentAction::MmuCut;
  5694. bFilamentFirstRun=false;
  5695. if(target_temperature[0]>=EXTRUDE_MINTEMP)
  5696. {
  5697. bFilamentPreheatState=true;
  5698. mFilamentItem(target_temperature[0],target_temperature_bed);
  5699. }
  5700. else lcd_generic_preheat_menu();
  5701. }
  5702. }
  5703. #endif //MMU_HAS_CUTTER
  5704. #ifdef SNMM
  5705. static void fil_unload_menu()
  5706. {
  5707. MENU_BEGIN();
  5708. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5709. MENU_ITEM_FUNCTION_P(_i("Unload all"), extr_unload_all);////MSG_UNLOAD_ALL c=17
  5710. MENU_ITEM_FUNCTION_P(_i("Unload filament 1"), extr_unload_0);////MSG_UNLOAD_FILAMENT_1 c=17
  5711. MENU_ITEM_FUNCTION_P(_i("Unload filament 2"), extr_unload_1);////MSG_UNLOAD_FILAMENT_2 c=17
  5712. MENU_ITEM_FUNCTION_P(_i("Unload filament 3"), extr_unload_2);////MSG_UNLOAD_FILAMENT_3 c=17
  5713. MENU_ITEM_FUNCTION_P(_i("Unload filament 4"), extr_unload_3);////MSG_UNLOAD_FILAMENT_4 c=17
  5714. if (mmu_enabled)
  5715. MENU_ITEM_FUNCTION_P(_i("Unload filament 5"), extr_unload_4);////MSG_UNLOAD_FILAMENT_5 c=17
  5716. MENU_END();
  5717. }
  5718. static void change_extr_menu(){
  5719. MENU_BEGIN();
  5720. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5721. MENU_ITEM_FUNCTION_P(_i("Extruder 1"), extr_change_0);////MSG_EXTRUDER_1 c=17 r=1
  5722. MENU_ITEM_FUNCTION_P(_i("Extruder 2"), extr_change_1);////MSG_EXTRUDER_2 c=17 r=1
  5723. MENU_ITEM_FUNCTION_P(_i("Extruder 3"), extr_change_2);////MSG_EXTRUDER_3 c=17 r=1
  5724. MENU_ITEM_FUNCTION_P(_i("Extruder 4"), extr_change_3);////MSG_EXTRUDER_4 c=17 r=1
  5725. MENU_END();
  5726. }
  5727. #endif //SNMM
  5728. //unload filament for single material printer (used in M702 gcode)
  5729. void unload_filament()
  5730. {
  5731. custom_message_type = CustomMsg::FilamentLoading;
  5732. lcd_setstatuspgm(_T(MSG_UNLOADING_FILAMENT));
  5733. raise_z_above(MIN_Z_FOR_UNLOAD);
  5734. // extr_unload2();
  5735. current_position[E_AXIS] -= 45;
  5736. plan_buffer_line_curposXYZE(5200 / 60);
  5737. st_synchronize();
  5738. current_position[E_AXIS] -= 15;
  5739. plan_buffer_line_curposXYZE(1000 / 60);
  5740. st_synchronize();
  5741. current_position[E_AXIS] -= 20;
  5742. plan_buffer_line_curposXYZE(1000 / 60);
  5743. st_synchronize();
  5744. lcd_display_message_fullscreen_P(_T(MSG_PULL_OUT_FILAMENT));
  5745. //disable extruder steppers so filament can be removed
  5746. disable_e0();
  5747. disable_e1();
  5748. disable_e2();
  5749. _delay(100);
  5750. Sound_MakeSound(e_SOUND_TYPE_StandardPrompt);
  5751. uint8_t counterBeep = 0;
  5752. while (!lcd_clicked() && (counterBeep < 50)) {
  5753. delay_keep_alive(100);
  5754. counterBeep++;
  5755. }
  5756. st_synchronize();
  5757. while (lcd_clicked()) delay_keep_alive(100);
  5758. lcd_update_enable(true);
  5759. lcd_setstatuspgm(_T(WELCOME_MSG));
  5760. custom_message_type = CustomMsg::Status;
  5761. }
  5762. static void lcd_farm_no()
  5763. {
  5764. char step = 0;
  5765. int enc_dif = 0;
  5766. int _farmno = farm_no;
  5767. int _ret = 0;
  5768. lcd_clear();
  5769. lcd_set_cursor(0, 0);
  5770. lcd_print("Farm no");
  5771. do
  5772. {
  5773. if (abs((enc_dif - lcd_encoder_diff)) > 2) {
  5774. if (enc_dif > lcd_encoder_diff) {
  5775. switch (step) {
  5776. case(0): if (_farmno >= 100) _farmno -= 100; break;
  5777. case(1): if (_farmno % 100 >= 10) _farmno -= 10; break;
  5778. case(2): if (_farmno % 10 >= 1) _farmno--; break;
  5779. default: break;
  5780. }
  5781. }
  5782. if (enc_dif < lcd_encoder_diff) {
  5783. switch (step) {
  5784. case(0): if (_farmno < 900) _farmno += 100; break;
  5785. case(1): if (_farmno % 100 < 90) _farmno += 10; break;
  5786. case(2): if (_farmno % 10 <= 8)_farmno++; break;
  5787. default: break;
  5788. }
  5789. }
  5790. enc_dif = 0;
  5791. lcd_encoder_diff = 0;
  5792. }
  5793. lcd_set_cursor(0, 2);
  5794. if (_farmno < 100) lcd_print("0");
  5795. if (_farmno < 10) lcd_print("0");
  5796. lcd_print(_farmno);
  5797. lcd_print(" ");
  5798. lcd_set_cursor(0, 3);
  5799. lcd_print(" ");
  5800. lcd_set_cursor(step, 3);
  5801. lcd_print("^");
  5802. _delay(100);
  5803. if (lcd_clicked())
  5804. {
  5805. _delay(200);
  5806. step++;
  5807. if(step == 3) {
  5808. _ret = 1;
  5809. farm_no = _farmno;
  5810. EEPROM_save_B(EEPROM_FARM_NUMBER, &farm_no);
  5811. prusa_statistics(20);
  5812. lcd_return_to_status();
  5813. }
  5814. }
  5815. manage_heater();
  5816. } while (_ret == 0);
  5817. }
  5818. unsigned char lcd_choose_color() {
  5819. //function returns index of currently chosen item
  5820. //following part can be modified from 2 to 255 items:
  5821. //-----------------------------------------------------
  5822. unsigned char items_no = 2;
  5823. const char *item[items_no];
  5824. item[0] = "Orange";
  5825. item[1] = "Black";
  5826. //-----------------------------------------------------
  5827. uint_least8_t active_rows;
  5828. static int first = 0;
  5829. int enc_dif = 0;
  5830. unsigned char cursor_pos = 1;
  5831. enc_dif = lcd_encoder_diff;
  5832. lcd_clear();
  5833. lcd_set_cursor(0, 1);
  5834. lcd_print(">");
  5835. active_rows = items_no < 3 ? items_no : 3;
  5836. lcd_consume_click();
  5837. while (1) {
  5838. lcd_puts_at_P(0, 0, PSTR("Choose color:"));
  5839. for (uint_least8_t i = 0; i < active_rows; i++) {
  5840. lcd_set_cursor(1, i+1);
  5841. lcd_print(item[first + i]);
  5842. }
  5843. manage_heater();
  5844. manage_inactivity(true);
  5845. proc_commands();
  5846. if (abs((enc_dif - lcd_encoder_diff)) > 12) {
  5847. if (enc_dif > lcd_encoder_diff) {
  5848. cursor_pos--;
  5849. }
  5850. if (enc_dif < lcd_encoder_diff) {
  5851. cursor_pos++;
  5852. }
  5853. if (cursor_pos > active_rows) {
  5854. cursor_pos = active_rows;
  5855. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5856. if (first < items_no - active_rows) {
  5857. first++;
  5858. lcd_clear();
  5859. }
  5860. }
  5861. if (cursor_pos < 1) {
  5862. cursor_pos = 1;
  5863. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5864. if (first > 0) {
  5865. first--;
  5866. lcd_clear();
  5867. }
  5868. }
  5869. lcd_set_cursor(0, 1);
  5870. lcd_print(" ");
  5871. lcd_set_cursor(0, 2);
  5872. lcd_print(" ");
  5873. lcd_set_cursor(0, 3);
  5874. lcd_print(" ");
  5875. lcd_set_cursor(0, cursor_pos);
  5876. lcd_print(">");
  5877. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  5878. enc_dif = lcd_encoder_diff;
  5879. _delay(100);
  5880. }
  5881. if (lcd_clicked()) {
  5882. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5883. switch(cursor_pos + first - 1) {
  5884. case 0: return 1; break;
  5885. case 1: return 0; break;
  5886. default: return 99; break;
  5887. }
  5888. }
  5889. }
  5890. }
  5891. void lcd_confirm_print()
  5892. {
  5893. uint8_t filament_type;
  5894. int enc_dif = 0;
  5895. int cursor_pos = 1;
  5896. int _ret = 0;
  5897. int _t = 0;
  5898. enc_dif = lcd_encoder_diff;
  5899. lcd_clear();
  5900. lcd_set_cursor(0, 0);
  5901. lcd_print("Print ok ?");
  5902. do
  5903. {
  5904. if (abs(enc_dif - lcd_encoder_diff) > 12) {
  5905. if (enc_dif > lcd_encoder_diff) {
  5906. cursor_pos--;
  5907. }
  5908. if (enc_dif < lcd_encoder_diff) {
  5909. cursor_pos++;
  5910. }
  5911. enc_dif = lcd_encoder_diff;
  5912. }
  5913. if (cursor_pos > 2) { cursor_pos = 2; }
  5914. if (cursor_pos < 1) { cursor_pos = 1; }
  5915. lcd_set_cursor(0, 2); lcd_print(" ");
  5916. lcd_set_cursor(0, 3); lcd_print(" ");
  5917. lcd_set_cursor(2, 2);
  5918. lcd_puts_P(_T(MSG_YES));
  5919. lcd_set_cursor(2, 3);
  5920. lcd_puts_P(_T(MSG_NO));
  5921. lcd_set_cursor(0, 1 + cursor_pos);
  5922. lcd_print(">");
  5923. _delay(100);
  5924. _t = _t + 1;
  5925. if (_t>100)
  5926. {
  5927. prusa_statistics(99);
  5928. _t = 0;
  5929. }
  5930. if (lcd_clicked())
  5931. {
  5932. filament_type = FARM_FILAMENT_COLOR_NONE;
  5933. if (cursor_pos == 1)
  5934. {
  5935. _ret = 1;
  5936. // filament_type = lcd_choose_color();
  5937. prusa_statistics(4, filament_type);
  5938. no_response = true; //we need confirmation by recieving PRUSA thx
  5939. important_status = 4;
  5940. saved_filament_type = filament_type;
  5941. NcTime = _millis();
  5942. }
  5943. if (cursor_pos == 2)
  5944. {
  5945. _ret = 2;
  5946. // filament_type = lcd_choose_color();
  5947. prusa_statistics(5, filament_type);
  5948. no_response = true; //we need confirmation by recieving PRUSA thx
  5949. important_status = 5;
  5950. saved_filament_type = filament_type;
  5951. NcTime = _millis();
  5952. }
  5953. }
  5954. manage_heater();
  5955. manage_inactivity();
  5956. proc_commands();
  5957. } while (_ret == 0);
  5958. }
  5959. #include "w25x20cl.h"
  5960. #ifdef LCD_TEST
  5961. static void lcd_test_menu()
  5962. {
  5963. W25X20CL_SPI_ENTER();
  5964. w25x20cl_enable_wr();
  5965. w25x20cl_chip_erase();
  5966. w25x20cl_disable_wr();
  5967. }
  5968. #endif //LCD_TEST
  5969. static bool fan_error_selftest()
  5970. {
  5971. #ifdef FANCHECK
  5972. if (!fans_check_enabled) return 0;
  5973. fanSpeed = 255;
  5974. #ifdef FAN_SOFT_PWM
  5975. fanSpeedSoftPwm = 255;
  5976. #endif //FAN_SOFT_PWM
  5977. manage_heater(); //enables print fan
  5978. setExtruderAutoFanState(3); //force enables the extruder fan
  5979. #ifdef FAN_SOFT_PWM
  5980. extruder_autofan_last_check = _millis();
  5981. fan_measuring = true;
  5982. #endif //FAN_SOFT_PWM
  5983. _delay(1000); //delay_keep_alive would turn off extruder fan, because temerature is too low (maybe)
  5984. manage_heater();
  5985. fanSpeed = 0;
  5986. setExtruderAutoFanState(1); //releases lock on the extruder fan
  5987. #ifdef FAN_SOFT_PWM
  5988. fanSpeedSoftPwm = 0;
  5989. #endif //FAN_SOFT_PWM
  5990. manage_heater();
  5991. #ifdef TACH_0
  5992. if (fan_speed[0] <= 20) { //extruder fan error
  5993. LCD_ALERTMESSAGERPGM(MSG_FANCHECK_EXTRUDER);
  5994. return 1;
  5995. }
  5996. #endif
  5997. #ifdef TACH_1
  5998. if (fan_speed[1] <= 20) { //print fan error
  5999. LCD_ALERTMESSAGERPGM(MSG_FANCHECK_PRINT);
  6000. return 1;
  6001. }
  6002. #endif
  6003. #endif //FANCHECK
  6004. return 0;
  6005. }
  6006. //! @brief Resume paused print
  6007. //! @todo It is not good to call restore_print_from_ram_and_continue() from function called by lcd_update(),
  6008. //! as restore_print_from_ram_and_continue() calls lcd_update() internally.
  6009. void lcd_resume_print()
  6010. {
  6011. lcd_return_to_status();
  6012. lcd_reset_alert_level(); //for fan speed error
  6013. if (fan_error_selftest()) return; //abort if error persists
  6014. lcd_setstatuspgm(_T(MSG_FINISHING_MOVEMENTS));
  6015. st_synchronize();
  6016. lcd_setstatuspgm(_T(MSG_RESUMING_PRINT)); ////MSG_RESUMING_PRINT c=20
  6017. isPrintPaused = false;
  6018. restore_print_from_ram_and_continue(default_retraction);
  6019. pause_time += (_millis() - start_pause_print); //accumulate time when print is paused for correct statistics calculation
  6020. refresh_cmd_timeout();
  6021. SERIAL_PROTOCOLLNRPGM(MSG_OCTOPRINT_RESUMED); //resume octoprint
  6022. }
  6023. static void change_sheet()
  6024. {
  6025. eeprom_update_byte(&(EEPROM_Sheets_base->active_sheet), selected_sheet);
  6026. menu_back(3);
  6027. }
  6028. static void lcd_rename_sheet_menu()
  6029. {
  6030. struct MenuData
  6031. {
  6032. bool initialized;
  6033. uint8_t selected;
  6034. char name[sizeof(Sheet::name)];
  6035. };
  6036. static_assert(sizeof(menu_data)>= sizeof(MenuData),"MenuData doesn't fit into menu_data");
  6037. MenuData* menuData = (MenuData*)&(menu_data[0]);
  6038. if (!menuData->initialized)
  6039. {
  6040. eeprom_read_block(menuData->name, EEPROM_Sheets_base->s[selected_sheet].name, sizeof(Sheet::name));
  6041. lcd_encoder = menuData->name[0];
  6042. menuData->initialized = true;
  6043. }
  6044. if (lcd_encoder < '\x20') lcd_encoder = '\x20';
  6045. if (lcd_encoder > '\x7F') lcd_encoder = '\x7F';
  6046. menuData->name[menuData->selected] = lcd_encoder;
  6047. lcd_set_cursor(0,0);
  6048. for (uint_least8_t i = 0; i < sizeof(Sheet::name); ++i)
  6049. {
  6050. lcd_putc(menuData->name[i]);
  6051. }
  6052. lcd_set_cursor(menuData->selected, 1);
  6053. lcd_putc('^');
  6054. if (lcd_clicked())
  6055. {
  6056. if ((menuData->selected + 1u) < sizeof(Sheet::name))
  6057. {
  6058. lcd_encoder = menuData->name[++(menuData->selected)];
  6059. }
  6060. else
  6061. {
  6062. eeprom_update_block(menuData->name,
  6063. EEPROM_Sheets_base->s[selected_sheet].name,
  6064. sizeof(Sheet::name));
  6065. menu_back();
  6066. }
  6067. }
  6068. }
  6069. static void lcd_reset_sheet()
  6070. {
  6071. SheetName sheetName;
  6072. eeprom_default_sheet_name(selected_sheet, sheetName);
  6073. eeprom_update_word(reinterpret_cast<uint16_t *>(&(EEPROM_Sheets_base->s[selected_sheet].z_offset)),EEPROM_EMPTY_VALUE16);
  6074. eeprom_update_block(sheetName.c,EEPROM_Sheets_base->s[selected_sheet].name,sizeof(Sheet::name));
  6075. if (selected_sheet == eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))
  6076. {
  6077. eeprom_switch_to_next_sheet();
  6078. if((-1 == eeprom_next_initialized_sheet(0)) && (CALIBRATION_STATUS_CALIBRATED == calibration_status()))
  6079. {
  6080. calibration_status_store(CALIBRATION_STATUS_LIVE_ADJUST);
  6081. }
  6082. }
  6083. menu_back();
  6084. }
  6085. //! @brief Activate selected_sheet and run first layer calibration
  6086. static void activate_calibrate_sheet()
  6087. {
  6088. eeprom_update_byte(&(EEPROM_Sheets_base->active_sheet), selected_sheet);
  6089. lcd_first_layer_calibration_reset();
  6090. }
  6091. static void lcd_sheet_menu()
  6092. {
  6093. MENU_BEGIN();
  6094. MENU_ITEM_BACK_P(_i("Steel sheets")); ////MSG_STEEL_SHEETS c=18
  6095. if(eeprom_is_sheet_initialized(selected_sheet)){
  6096. MENU_ITEM_SUBMENU_P(_i("Select"), change_sheet); //// c=18
  6097. }
  6098. if (lcd_commands_type == LcdCommands::Idle)
  6099. {
  6100. MENU_ITEM_SUBMENU_P(_T(MSG_V2_CALIBRATION), activate_calibrate_sheet);////MSG_V2_CALIBRATION c=18
  6101. }
  6102. MENU_ITEM_SUBMENU_P(_i("Rename"), lcd_rename_sheet_menu); //// c=18
  6103. MENU_ITEM_FUNCTION_P(_i("Reset"), lcd_reset_sheet); //// c=18
  6104. MENU_END();
  6105. }
  6106. static void lcd_main_menu()
  6107. {
  6108. MENU_BEGIN();
  6109. // Majkl superawesome menu
  6110. MENU_ITEM_BACK_P(_T(MSG_WATCH));
  6111. #ifdef RESUME_DEBUG
  6112. if (!saved_printing)
  6113. MENU_ITEM_FUNCTION_P(PSTR("tst - Save"), lcd_menu_test_save);
  6114. else
  6115. MENU_ITEM_FUNCTION_P(PSTR("tst - Restore"), lcd_menu_test_restore);
  6116. #endif //RESUME_DEBUG
  6117. #ifdef TMC2130_DEBUG
  6118. MENU_ITEM_FUNCTION_P(PSTR("recover print"), recover_print);
  6119. MENU_ITEM_FUNCTION_P(PSTR("power panic"), uvlo_);
  6120. #endif //TMC2130_DEBUG
  6121. if ( ( IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LcdCommands::Layer1Cal)) && (current_position[Z_AXIS] < Z_HEIGHT_HIDE_LIVE_ADJUST_MENU) && !homing_flag && !mesh_bed_leveling_flag)
  6122. {
  6123. MENU_ITEM_SUBMENU_P(_T(MSG_BABYSTEP_Z), lcd_babystep_z);//8
  6124. }
  6125. if ( moves_planned() || IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LcdCommands::Layer1Cal))
  6126. {
  6127. MENU_ITEM_SUBMENU_P(_i("Tune"), lcd_tune_menu);////MSG_TUNE
  6128. } else
  6129. {
  6130. MENU_ITEM_SUBMENU_P(_i("Preheat"), lcd_preheat_menu);////MSG_PREHEAT
  6131. }
  6132. if(isPrintPaused && saved_printing_type == PRINTING_TYPE_USB)
  6133. {
  6134. #ifdef FANCHECK
  6135. if((fan_check_error == EFCE_FIXED) || (fan_check_error == EFCE_OK))
  6136. MENU_ITEM_SUBMENU_P(_i("Resume print"), lcd_resume_print);////MSG_RESUME_PRINT
  6137. #else
  6138. MENU_ITEM_SUBMENU_P(_i("Resume print"), lcd_resume_print);////MSG_RESUME_PRINT
  6139. #endif
  6140. }
  6141. #ifdef SDSUPPORT
  6142. if (card.cardOK || lcd_commands_type == LcdCommands::Layer1Cal)
  6143. {
  6144. if (card.isFileOpen())
  6145. {
  6146. if (mesh_bed_leveling_flag == false && homing_flag == false) {
  6147. if (card.sdprinting)
  6148. {
  6149. MENU_ITEM_FUNCTION_P(_i("Pause print"), lcd_pause_print);////MSG_PAUSE_PRINT
  6150. }
  6151. else if(isPrintPaused)
  6152. {
  6153. #ifdef FANCHECK
  6154. if((fan_check_error == EFCE_FIXED) || (fan_check_error == EFCE_OK))
  6155. MENU_ITEM_SUBMENU_P(_i("Resume print"), lcd_resume_print);////MSG_RESUME_PRINT
  6156. #else
  6157. MENU_ITEM_SUBMENU_P(_i("Resume print"), lcd_resume_print);////MSG_RESUME_PRINT
  6158. #endif
  6159. }
  6160. MENU_ITEM_SUBMENU_P(_T(MSG_STOP_PRINT), lcd_sdcard_stop);
  6161. }
  6162. }
  6163. else if (lcd_commands_type == LcdCommands::Layer1Cal && mesh_bed_leveling_flag == false && homing_flag == false) {
  6164. //MENU_ITEM_SUBMENU_P(_T(MSG_STOP_PRINT), lcd_sdcard_stop);
  6165. }
  6166. else
  6167. {
  6168. if (!is_usb_printing && (lcd_commands_type != LcdCommands::Layer1Cal))
  6169. {
  6170. //if (farm_mode) MENU_ITEM_SUBMENU_P(MSG_FARM_CARD_MENU, lcd_farm_sdcard_menu);
  6171. /*else*/ {
  6172. bMain=true; // flag ('fake parameter') for 'lcd_sdcard_menu()' function
  6173. MENU_ITEM_SUBMENU_P(_T(MSG_CARD_MENU), lcd_sdcard_menu);
  6174. }
  6175. }
  6176. #if SDCARDDETECT < 1
  6177. MENU_ITEM_GCODE_P(_i("Change SD card"), PSTR("M21")); // SD-card changed by user////MSG_CNG_SDCARD
  6178. #endif
  6179. }
  6180. } else
  6181. {
  6182. bMain=true; // flag (i.e. 'fake parameter') for 'lcd_sdcard_menu()' function
  6183. MENU_ITEM_SUBMENU_P(_i("No SD card"), lcd_sdcard_menu);////MSG_NO_CARD
  6184. #if SDCARDDETECT < 1
  6185. MENU_ITEM_GCODE_P(_i("Init. SD card"), PSTR("M21")); // Manually initialize the SD-card via user interface////MSG_INIT_SDCARD
  6186. #endif
  6187. }
  6188. #endif
  6189. if(!isPrintPaused && !IS_SD_PRINTING && !is_usb_printing && (lcd_commands_type != LcdCommands::Layer1Cal))
  6190. {
  6191. if (!farm_mode)
  6192. {
  6193. const int8_t sheet = eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet));
  6194. const int8_t nextSheet = eeprom_next_initialized_sheet(sheet);
  6195. if ((nextSheet >= 0) && (sheet != nextSheet)) // show menu only if we have 2 or more sheets initialized
  6196. {
  6197. MENU_ITEM_FUNCTION_E(EEPROM_Sheets_base->s[sheet], eeprom_switch_to_next_sheet);
  6198. }
  6199. }
  6200. }
  6201. if (IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LcdCommands::Layer1Cal))
  6202. {
  6203. if (farm_mode)
  6204. {
  6205. MENU_ITEM_SUBMENU_P(PSTR("Farm number"), lcd_farm_no);
  6206. }
  6207. }
  6208. else
  6209. {
  6210. if (mmu_enabled)
  6211. {
  6212. MENU_ITEM_SUBMENU_P(_T(MSG_LOAD_FILAMENT), fil_load_menu);
  6213. MENU_ITEM_SUBMENU_P(_i("Load to nozzle"), mmu_load_to_nozzle_menu);
  6214. //-// MENU_ITEM_FUNCTION_P(_T(MSG_UNLOAD_FILAMENT), extr_unload);
  6215. //bFilamentFirstRun=true;
  6216. MENU_ITEM_SUBMENU_P(_T(MSG_UNLOAD_FILAMENT), mmu_unload_filament);
  6217. MENU_ITEM_SUBMENU_P(_i("Eject filament"), mmu_fil_eject_menu);
  6218. #ifdef MMU_HAS_CUTTER
  6219. MENU_ITEM_SUBMENU_P(_i("Cut filament"), mmu_cut_filament_menu);
  6220. #endif //MMU_HAS_CUTTER
  6221. }
  6222. else
  6223. {
  6224. #ifdef SNMM
  6225. MENU_ITEM_SUBMENU_P(_T(MSG_UNLOAD_FILAMENT), fil_unload_menu);
  6226. MENU_ITEM_SUBMENU_P(_i("Change extruder"), change_extr_menu);////MSG_CHANGE_EXTR c=20 r=1
  6227. #endif
  6228. #ifdef FILAMENT_SENSOR
  6229. if ((fsensor_autoload_enabled == true) && (fsensor_enabled == true) && (mmu_enabled == false))
  6230. MENU_ITEM_SUBMENU_P(_i("AutoLoad filament"), lcd_menu_AutoLoadFilament);////MSG_AUTOLOAD_FILAMENT c=18
  6231. else
  6232. #endif //FILAMENT_SENSOR
  6233. {
  6234. bFilamentFirstRun=true;
  6235. MENU_ITEM_SUBMENU_P(_T(MSG_LOAD_FILAMENT), lcd_LoadFilament);
  6236. }
  6237. bFilamentFirstRun=true;
  6238. MENU_ITEM_SUBMENU_P(_T(MSG_UNLOAD_FILAMENT), lcd_unLoadFilament);
  6239. }
  6240. MENU_ITEM_SUBMENU_P(_T(MSG_SETTINGS), lcd_settings_menu);
  6241. if(!isPrintPaused) MENU_ITEM_SUBMENU_P(_T(MSG_MENU_CALIBRATION), lcd_calibration_menu);
  6242. }
  6243. if (!is_usb_printing && (lcd_commands_type != LcdCommands::Layer1Cal))
  6244. {
  6245. MENU_ITEM_SUBMENU_P(_i("Statistics "), lcd_menu_statistics);////MSG_STATISTICS
  6246. }
  6247. #if defined(TMC2130) || defined(FILAMENT_SENSOR)
  6248. MENU_ITEM_SUBMENU_P(_i("Fail stats"), lcd_menu_fails_stats);
  6249. #endif
  6250. if (mmu_enabled) {
  6251. MENU_ITEM_SUBMENU_P(_i("Fail stats MMU"), lcd_menu_fails_stats_mmu);
  6252. }
  6253. MENU_ITEM_SUBMENU_P(_i("Support"), lcd_support_menu);////MSG_SUPPORT
  6254. #ifdef LCD_TEST
  6255. MENU_ITEM_SUBMENU_P(_i("W25x20CL init"), lcd_test_menu);////MSG_SUPPORT
  6256. #endif //LCD_TEST
  6257. MENU_END();
  6258. }
  6259. void stack_error() {
  6260. Sound_MakeCustom(1000,0,true);
  6261. lcd_display_message_fullscreen_P(_i("Error - static memory has been overwritten"));////MSG_STACK_ERROR c=20 r=4
  6262. //err_triggered = 1;
  6263. while (1) delay_keep_alive(1000);
  6264. }
  6265. #ifdef DEBUG_STEPPER_TIMER_MISSED
  6266. bool stepper_timer_overflow_state = false;
  6267. uint16_t stepper_timer_overflow_max = 0;
  6268. uint16_t stepper_timer_overflow_last = 0;
  6269. uint16_t stepper_timer_overflow_cnt = 0;
  6270. void stepper_timer_overflow() {
  6271. char msg[28];
  6272. sprintf_P(msg, PSTR("#%d %d max %d"), ++ stepper_timer_overflow_cnt, stepper_timer_overflow_last >> 1, stepper_timer_overflow_max >> 1);
  6273. lcd_setstatus(msg);
  6274. stepper_timer_overflow_state = false;
  6275. if (stepper_timer_overflow_last > stepper_timer_overflow_max)
  6276. stepper_timer_overflow_max = stepper_timer_overflow_last;
  6277. SERIAL_ECHOPGM("Stepper timer overflow: ");
  6278. MYSERIAL.print(msg);
  6279. SERIAL_ECHOLNPGM("");
  6280. WRITE(BEEPER, LOW);
  6281. }
  6282. #endif /* DEBUG_STEPPER_TIMER_MISSED */
  6283. static void lcd_colorprint_change() {
  6284. enquecommand_P(PSTR("M600"));
  6285. custom_message_type = CustomMsg::FilamentLoading; //just print status message
  6286. lcd_setstatuspgm(_T(MSG_FINISHING_MOVEMENTS));
  6287. lcd_return_to_status();
  6288. lcd_draw_update = 3;
  6289. }
  6290. #ifdef LA_LIVE_K
  6291. // @wavexx: looks like there's no generic float editing function in menu.cpp so we
  6292. // redefine our custom handling functions to mimick other tunables
  6293. const char menu_fmt_float13off[] PROGMEM = "%c%-13.13S%6.6S";
  6294. static void lcd_advance_draw_K(char chr, float val)
  6295. {
  6296. if (val <= 0)
  6297. lcd_printf_P(menu_fmt_float13off, chr, MSG_ADVANCE_K, _T(MSG_OFF));
  6298. else
  6299. lcd_printf_P(menu_fmt_float13, chr, MSG_ADVANCE_K, val);
  6300. }
  6301. static void lcd_advance_edit_K(void)
  6302. {
  6303. if (lcd_draw_update)
  6304. {
  6305. if (lcd_encoder < 0) lcd_encoder = 0;
  6306. if (lcd_encoder > 999) lcd_encoder = 999;
  6307. lcd_set_cursor(0, 1);
  6308. lcd_advance_draw_K(' ', 0.01 * lcd_encoder);
  6309. }
  6310. if (LCD_CLICKED)
  6311. {
  6312. extruder_advance_K = 0.01 * lcd_encoder;
  6313. menu_back_no_reset();
  6314. }
  6315. }
  6316. static uint8_t lcd_advance_K()
  6317. {
  6318. if (menu_item == menu_line)
  6319. {
  6320. if (lcd_draw_update)
  6321. {
  6322. lcd_set_cursor(0, menu_row);
  6323. lcd_advance_draw_K((lcd_encoder == menu_item)?'>':' ', extruder_advance_K);
  6324. }
  6325. if (menu_clicked && (lcd_encoder == menu_item))
  6326. {
  6327. menu_submenu_no_reset(lcd_advance_edit_K);
  6328. lcd_encoder = 100. * extruder_advance_K;
  6329. return menu_item_ret();
  6330. }
  6331. }
  6332. menu_item++;
  6333. return 0;
  6334. }
  6335. #define MENU_ITEM_EDIT_advance_K() do { if (lcd_advance_K()) return; } while (0)
  6336. #endif
  6337. static void lcd_tune_menu()
  6338. {
  6339. typedef struct
  6340. {
  6341. menu_data_edit_t reserved; //!< reserved for number editing functions
  6342. int8_t status; //!< To recognize, whether the menu has been just initialized.
  6343. //! Backup of extrudemultiply, to recognize, that the value has been changed and
  6344. //! it needs to be applied.
  6345. int16_t extrudemultiply;
  6346. } _menu_data_t;
  6347. static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
  6348. _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
  6349. if (_md->status == 0)
  6350. {
  6351. // Menu was entered. Mark the menu as entered and save the current extrudemultiply value.
  6352. _md->status = 1;
  6353. _md->extrudemultiply = extrudemultiply;
  6354. }
  6355. else if (_md->extrudemultiply != extrudemultiply)
  6356. {
  6357. // extrudemultiply has been changed from the child menu. Apply the new value.
  6358. _md->extrudemultiply = extrudemultiply;
  6359. calculate_extruder_multipliers();
  6360. }
  6361. EEPROM_read(EEPROM_SILENT, (uint8_t*)&SilentModeMenu, sizeof(SilentModeMenu));
  6362. MENU_BEGIN();
  6363. MENU_ITEM_BACK_P(_T(MSG_MAIN)); //1
  6364. MENU_ITEM_EDIT_int3_P(_i("Speed"), &feedmultiply, 10, 999);//2////MSG_SPEED
  6365. MENU_ITEM_EDIT_int3_P(_T(MSG_NOZZLE), &target_temperature[0], 0, HEATER_0_MAXTEMP - 10);//3
  6366. MENU_ITEM_EDIT_int3_P(_T(MSG_BED), &target_temperature_bed, 0, BED_MAXTEMP - 10);//4
  6367. MENU_ITEM_EDIT_int3_P(_T(MSG_FAN_SPEED), &fanSpeed, 0, 255);//5
  6368. MENU_ITEM_EDIT_int3_P(_i("Flow"), &extrudemultiply, 10, 999);//6////MSG_FLOW
  6369. #ifdef LA_LIVE_K
  6370. MENU_ITEM_EDIT_advance_K();//7
  6371. #endif
  6372. #ifdef FILAMENTCHANGEENABLE
  6373. MENU_ITEM_FUNCTION_P(_T(MSG_FILAMENTCHANGE), lcd_colorprint_change);//8
  6374. #endif
  6375. #ifdef FILAMENT_SENSOR
  6376. if (FSensorStateMenu == 0) {
  6377. if (fsensor_not_responding && (mmu_enabled == false)) {
  6378. /* Filament sensor not working*/
  6379. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_NA), lcd_fsensor_state_set);
  6380. }
  6381. else {
  6382. /* Filament sensor turned off, working, no problems*/
  6383. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_OFF), lcd_fsensor_state_set);
  6384. }
  6385. }
  6386. else {
  6387. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_ON), lcd_fsensor_state_set);
  6388. }
  6389. #ifdef IR_SENSOR_ANALOG
  6390. FSENSOR_ACTION_NA;
  6391. #endif //IR_SENSOR_ANALOG
  6392. #endif //FILAMENT_SENSOR
  6393. SETTINGS_AUTO_DEPLETE;
  6394. SETTINGS_CUTTER;
  6395. if(farm_mode)
  6396. {
  6397. MENU_ITEM_TOGGLE_P(_i("Fans check"), fans_check_enabled ? _T(MSG_ON) : _T(MSG_OFF), lcd_set_fan_check);
  6398. }
  6399. #ifdef TMC2130
  6400. if(!farm_mode)
  6401. {
  6402. if (SilentModeMenu == SILENT_MODE_NORMAL) MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_NORMAL), lcd_silent_mode_set);
  6403. else MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_STEALTH), lcd_silent_mode_set);
  6404. if (SilentModeMenu == SILENT_MODE_NORMAL)
  6405. {
  6406. if (lcd_crash_detect_enabled()) MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_ON), crash_mode_switch);
  6407. else MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_OFF), crash_mode_switch);
  6408. }
  6409. else MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), NULL, lcd_crash_mode_info);
  6410. }
  6411. #else //TMC2130
  6412. if (!farm_mode) { //dont show in menu if we are in farm mode
  6413. switch (SilentModeMenu) {
  6414. case SILENT_MODE_POWER: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set); break;
  6415. case SILENT_MODE_SILENT: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_SILENT), lcd_silent_mode_set); break;
  6416. case SILENT_MODE_AUTO: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_AUTO_POWER), lcd_silent_mode_set); break;
  6417. default: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set); break; // (probably) not needed
  6418. }
  6419. }
  6420. #endif //TMC2130
  6421. SETTINGS_MMU_MODE;
  6422. SETTINGS_SOUND;
  6423. #ifdef LCD_BL_PIN
  6424. if (backlightSupport)
  6425. {
  6426. MENU_ITEM_SUBMENU_P(_T(MSG_BRIGHTNESS), lcd_backlight_menu);
  6427. }
  6428. #endif //LCD_BL_PIN
  6429. MENU_END();
  6430. }
  6431. static void mbl_magnets_elimination_toggle() {
  6432. bool magnet_elimination = (eeprom_read_byte((uint8_t*)EEPROM_MBL_MAGNET_ELIMINATION) > 0);
  6433. magnet_elimination = !magnet_elimination;
  6434. eeprom_update_byte((uint8_t*)EEPROM_MBL_MAGNET_ELIMINATION, (uint8_t)magnet_elimination);
  6435. }
  6436. static void mbl_mesh_toggle() {
  6437. uint8_t mesh_nr = eeprom_read_byte((uint8_t*)EEPROM_MBL_POINTS_NR);
  6438. if(mesh_nr == 3) mesh_nr = 7;
  6439. else mesh_nr = 3;
  6440. eeprom_update_byte((uint8_t*)EEPROM_MBL_POINTS_NR, mesh_nr);
  6441. }
  6442. static void mbl_probe_nr_toggle() {
  6443. mbl_z_probe_nr = eeprom_read_byte((uint8_t*)EEPROM_MBL_PROBE_NR);
  6444. switch (mbl_z_probe_nr) {
  6445. case 1: mbl_z_probe_nr = 3; break;
  6446. case 3: mbl_z_probe_nr = 5; break;
  6447. case 5: mbl_z_probe_nr = 1; break;
  6448. default: mbl_z_probe_nr = 3; break;
  6449. }
  6450. eeprom_update_byte((uint8_t*)EEPROM_MBL_PROBE_NR, mbl_z_probe_nr);
  6451. }
  6452. static void lcd_mesh_bed_leveling_settings()
  6453. {
  6454. bool magnet_elimination = (eeprom_read_byte((uint8_t*)EEPROM_MBL_MAGNET_ELIMINATION) > 0);
  6455. uint8_t points_nr = eeprom_read_byte((uint8_t*)EEPROM_MBL_POINTS_NR);
  6456. char sToggle[4]; //enough for nxn format
  6457. MENU_BEGIN();
  6458. MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
  6459. sToggle[0] = points_nr + '0';
  6460. sToggle[1] = 'x';
  6461. sToggle[2] = points_nr + '0';
  6462. sToggle[3] = 0;
  6463. MENU_ITEM_TOGGLE(_T(MSG_MESH), sToggle, mbl_mesh_toggle);
  6464. sToggle[0] = mbl_z_probe_nr + '0';
  6465. sToggle[1] = 0;
  6466. MENU_ITEM_TOGGLE(_T(MSG_Z_PROBE_NR), sToggle, mbl_probe_nr_toggle);
  6467. MENU_ITEM_TOGGLE_P(_T(MSG_MAGNETS_COMP), (points_nr == 7) ? (magnet_elimination ? _T(MSG_ON): _T(MSG_OFF)) : _T(MSG_NA), mbl_magnets_elimination_toggle);
  6468. MENU_END();
  6469. //SETTINGS_MBL_MODE;
  6470. }
  6471. #ifdef LCD_BL_PIN
  6472. static void backlight_mode_toggle()
  6473. {
  6474. switch (backlightMode)
  6475. {
  6476. case BACKLIGHT_MODE_BRIGHT: backlightMode = BACKLIGHT_MODE_DIM; break;
  6477. case BACKLIGHT_MODE_DIM: backlightMode = BACKLIGHT_MODE_AUTO; break;
  6478. case BACKLIGHT_MODE_AUTO: backlightMode = BACKLIGHT_MODE_BRIGHT; break;
  6479. default: backlightMode = BACKLIGHT_MODE_BRIGHT; break;
  6480. }
  6481. backlight_save();
  6482. }
  6483. static void lcd_backlight_menu()
  6484. {
  6485. MENU_BEGIN();
  6486. ON_MENU_LEAVE(
  6487. backlight_save();
  6488. );
  6489. MENU_ITEM_BACK_P(_T(MSG_BACK));
  6490. MENU_ITEM_EDIT_int3_P(_T(MSG_BL_HIGH), &backlightLevel_HIGH, backlightLevel_LOW, 255);
  6491. MENU_ITEM_EDIT_int3_P(_T(MSG_BL_LOW), &backlightLevel_LOW, 0, backlightLevel_HIGH);
  6492. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), ((backlightMode==BACKLIGHT_MODE_BRIGHT) ? _T(MSG_BRIGHT) : ((backlightMode==BACKLIGHT_MODE_DIM) ? _T(MSG_DIM) : _T(MSG_AUTO))), backlight_mode_toggle);
  6493. MENU_ITEM_EDIT_int3_P(_T(MSG_TIMEOUT), &backlightTimer_period, 1, 999);
  6494. MENU_END();
  6495. }
  6496. #endif //LCD_BL_PIN
  6497. static void lcd_control_temperature_menu()
  6498. {
  6499. #ifdef PIDTEMP
  6500. // set up temp variables - undo the default scaling
  6501. // raw_Ki = unscalePID_i(Ki);
  6502. // raw_Kd = unscalePID_d(Kd);
  6503. #endif
  6504. MENU_BEGIN();
  6505. MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
  6506. #if TEMP_SENSOR_0 != 0
  6507. MENU_ITEM_EDIT_int3_P(_T(MSG_NOZZLE), &target_temperature[0], 0, HEATER_0_MAXTEMP - 10);
  6508. #endif
  6509. #if TEMP_SENSOR_1 != 0
  6510. MENU_ITEM_EDIT_int3_P(_i("Nozzle2"), &target_temperature[1], 0, HEATER_1_MAXTEMP - 10);////MSG_NOZZLE1
  6511. #endif
  6512. #if TEMP_SENSOR_2 != 0
  6513. MENU_ITEM_EDIT_int3_P(_i("Nozzle3"), &target_temperature[2], 0, HEATER_2_MAXTEMP - 10);////MSG_NOZZLE2
  6514. #endif
  6515. #if TEMP_SENSOR_BED != 0
  6516. MENU_ITEM_EDIT_int3_P(_T(MSG_BED), &target_temperature_bed, 0, BED_MAXTEMP - 3);
  6517. #endif
  6518. MENU_ITEM_EDIT_int3_P(_T(MSG_FAN_SPEED), &fanSpeed, 0, 255);
  6519. #if defined AUTOTEMP && (TEMP_SENSOR_0 != 0)
  6520. //MENU_ITEM_EDIT removed, following code must be redesigned if AUTOTEMP enabled
  6521. MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled);
  6522. MENU_ITEM_EDIT(float3, _i(" \002 Min"), &autotemp_min, 0, HEATER_0_MAXTEMP - 10);////MSG_MIN
  6523. MENU_ITEM_EDIT(float3, _i(" \002 Max"), &autotemp_max, 0, HEATER_0_MAXTEMP - 10);////MSG_MAX
  6524. MENU_ITEM_EDIT(float32, _i(" \002 Fact"), &autotemp_factor, 0.0, 1.0);////MSG_FACTOR
  6525. #endif
  6526. MENU_END();
  6527. }
  6528. #if SDCARDDETECT == -1
  6529. static void lcd_sd_refresh()
  6530. {
  6531. card.initsd();
  6532. menu_top = 0;
  6533. }
  6534. #endif
  6535. static void lcd_sd_updir()
  6536. {
  6537. card.updir();
  6538. menu_top = 0;
  6539. }
  6540. void lcd_print_stop()
  6541. {
  6542. if (!card.sdprinting) {
  6543. SERIAL_ECHOLNRPGM(MSG_OCTOPRINT_CANCEL); // for Octoprint
  6544. }
  6545. CRITICAL_SECTION_START;
  6546. // Clear any saved printing state
  6547. cancel_saved_printing();
  6548. // Abort the planner/queue/sd
  6549. planner_abort_hard();
  6550. cmdqueue_reset();
  6551. card.sdprinting = false;
  6552. card.closefile();
  6553. st_reset_timer();
  6554. CRITICAL_SECTION_END;
  6555. #ifdef MESH_BED_LEVELING
  6556. mbl.active = false; //also prevents undoing the mbl compensation a second time in the second planner_abort_hard()
  6557. #endif
  6558. lcd_setstatuspgm(_T(MSG_PRINT_ABORTED));
  6559. stoptime = _millis();
  6560. unsigned long t = (stoptime - starttime - pause_time) / 1000; //time in s
  6561. pause_time = 0;
  6562. save_statistics(total_filament_used, t);
  6563. lcd_commands_step = 0;
  6564. lcd_commands_type = LcdCommands::Idle;
  6565. lcd_cooldown(); //turns off heaters and fan; goes to status screen.
  6566. cancel_heatup = true; //unroll temperature wait loop stack.
  6567. current_position[Z_AXIS] += 10; //lift Z.
  6568. plan_buffer_line_curposXYZE(manual_feedrate[Z_AXIS] / 60);
  6569. if (axis_known_position[X_AXIS] && axis_known_position[Y_AXIS]) //if axis are homed, move to parked position.
  6570. {
  6571. current_position[X_AXIS] = X_CANCEL_POS;
  6572. current_position[Y_AXIS] = Y_CANCEL_POS;
  6573. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6574. }
  6575. st_synchronize();
  6576. if (mmu_enabled) extr_unload(); //M702 C
  6577. finishAndDisableSteppers(); //M84
  6578. lcd_setstatuspgm(_T(WELCOME_MSG));
  6579. custom_message_type = CustomMsg::Status;
  6580. planner_abort_hard(); //needs to be done since plan_buffer_line resets waiting_inside_plan_buffer_line_print_aborted to false. Also copies current to destination.
  6581. axis_relative_modes = E_AXIS_MASK; //XYZ absolute, E relative
  6582. isPrintPaused = false; //clear isPrintPaused flag to allow starting next print after pause->stop scenario.
  6583. }
  6584. void lcd_sdcard_stop()
  6585. {
  6586. lcd_set_cursor(0, 0);
  6587. lcd_puts_P(_T(MSG_STOP_PRINT));
  6588. lcd_set_cursor(2, 2);
  6589. lcd_puts_P(_T(MSG_NO));
  6590. lcd_set_cursor(2, 3);
  6591. lcd_puts_P(_T(MSG_YES));
  6592. lcd_set_cursor(0, 2); lcd_print(" ");
  6593. lcd_set_cursor(0, 3); lcd_print(" ");
  6594. if ((int32_t)lcd_encoder > 2) { lcd_encoder = 2; }
  6595. if ((int32_t)lcd_encoder < 1) { lcd_encoder = 1; }
  6596. lcd_set_cursor(0, 1 + lcd_encoder);
  6597. lcd_print(">");
  6598. if (lcd_clicked())
  6599. {
  6600. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  6601. if ((int32_t)lcd_encoder == 1)
  6602. {
  6603. lcd_return_to_status();
  6604. }
  6605. if ((int32_t)lcd_encoder == 2)
  6606. {
  6607. lcd_print_stop();
  6608. }
  6609. }
  6610. }
  6611. void lcd_sdcard_menu()
  6612. {
  6613. uint8_t sdSort = eeprom_read_byte((uint8_t*)EEPROM_SD_SORT);
  6614. if (presort_flag == true) {
  6615. presort_flag = false;
  6616. card.presort();
  6617. }
  6618. if (lcd_draw_update == 0 && LCD_CLICKED == 0)
  6619. //_delay(100);
  6620. return; // nothing to do (so don't thrash the SD card)
  6621. uint16_t fileCnt = card.getnrfilenames();
  6622. MENU_BEGIN();
  6623. MENU_ITEM_BACK_P(_T(bMain?MSG_MAIN:MSG_BACK)); // i.e. default menu-item / menu-item after card insertion
  6624. card.getWorkDirName();
  6625. if (card.filename[0] == '/')
  6626. {
  6627. #if SDCARDDETECT == -1
  6628. MENU_ITEM_FUNCTION_P(_T(MSG_REFRESH), lcd_sd_refresh);
  6629. #endif
  6630. } else {
  6631. MENU_ITEM_FUNCTION_P(PSTR(LCD_STR_FOLDER ".."), lcd_sd_updir);
  6632. }
  6633. for (uint16_t i = 0; i < fileCnt; i++)
  6634. {
  6635. if (menu_item == menu_line)
  6636. {
  6637. const uint16_t nr = ((sdSort == SD_SORT_NONE) || farm_mode || (sdSort == SD_SORT_TIME)) ? (fileCnt - 1 - i) : i;
  6638. /*#ifdef SDCARD_RATHERRECENTFIRST
  6639. #ifndef SDCARD_SORT_ALPHA
  6640. fileCnt - 1 -
  6641. #endif
  6642. #endif
  6643. i;*/
  6644. #ifdef SDCARD_SORT_ALPHA
  6645. if (sdSort == SD_SORT_NONE) card.getfilename(nr);
  6646. else card.getfilename_sorted(nr);
  6647. #else
  6648. card.getfilename(nr);
  6649. #endif
  6650. if (card.filenameIsDir)
  6651. MENU_ITEM_SDDIR(card.filename, card.longFilename);
  6652. else
  6653. MENU_ITEM_SDFILE(_T(MSG_CARD_MENU), card.filename, card.longFilename);
  6654. } else {
  6655. MENU_ITEM_DUMMY();
  6656. }
  6657. }
  6658. MENU_END();
  6659. }
  6660. #ifdef TMC2130
  6661. static void lcd_belttest_v()
  6662. {
  6663. lcd_belttest();
  6664. menu_back_if_clicked();
  6665. }
  6666. void lcd_belttest()
  6667. {
  6668. lcd_clear();
  6669. // Belttest requires high power mode. Enable it.
  6670. FORCE_HIGH_POWER_START;
  6671. uint16_t X = eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_X));
  6672. uint16_t Y = eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_Y));
  6673. lcd_printf_P(_i("Checking X axis ")); // share message with selftest
  6674. lcd_set_cursor(0,1), lcd_printf_P(PSTR("X: %u -> ..."),X);
  6675. KEEPALIVE_STATE(IN_HANDLER);
  6676. // N.B: it doesn't make sense to handle !lcd_selfcheck...() because selftest_sg throws its own error screen
  6677. // that clobbers ours, with more info than we could provide. So on fail we just fall through to take us back to status.
  6678. if (lcd_selfcheck_axis_sg(X_AXIS)){
  6679. X = eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_X));
  6680. lcd_set_cursor(10,1), lcd_printf_P(PSTR("%u"),X); // Show new X value next to old one.
  6681. lcd_puts_at_P(0,2,_i("Checking Y axis "));
  6682. lcd_set_cursor(0,3), lcd_printf_P(PSTR("Y: %u -> ..."),Y);
  6683. if (lcd_selfcheck_axis_sg(Y_AXIS))
  6684. {
  6685. Y = eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_Y));
  6686. lcd_set_cursor(10,3),lcd_printf_P(PSTR("%u"),Y);
  6687. lcd_set_cursor(19, 3);
  6688. lcd_print(LCD_STR_UPLEVEL);
  6689. lcd_wait_for_click_delay(10);
  6690. }
  6691. }
  6692. FORCE_HIGH_POWER_END;
  6693. KEEPALIVE_STATE(NOT_BUSY);
  6694. }
  6695. #endif //TMC2130
  6696. #ifdef IR_SENSOR_ANALOG
  6697. // called also from marlin_main.cpp
  6698. void printf_IRSensorAnalogBoardChange(){
  6699. printf_P(PSTR("Filament sensor board change detected: revision%S\n"), FsensorIRVersionText());
  6700. }
  6701. static bool lcd_selftest_IRsensor(bool bStandalone)
  6702. {
  6703. bool bPCBrev04;
  6704. uint16_t volt_IR_int;
  6705. volt_IR_int = current_voltage_raw_IR;
  6706. bPCBrev04=(volt_IR_int < IRsensor_Hopen_TRESHOLD);
  6707. printf_P(PSTR("Measured filament sensor high level: %4.2fV\n"), Raw2Voltage(volt_IR_int) );
  6708. if(volt_IR_int < IRsensor_Hmin_TRESHOLD){
  6709. if(!bStandalone)
  6710. lcd_selftest_error(TestError::FsensorLevel,"HIGH","");
  6711. return(false);
  6712. }
  6713. lcd_show_fullscreen_message_and_wait_P(_i("Insert the filament (do not load it) into the extruder and then press the knob."));////c=20 r=6
  6714. volt_IR_int = current_voltage_raw_IR;
  6715. printf_P(PSTR("Measured filament sensor low level: %4.2fV\n"), Raw2Voltage(volt_IR_int));
  6716. if(volt_IR_int > (IRsensor_Lmax_TRESHOLD)){
  6717. if(!bStandalone)
  6718. lcd_selftest_error(TestError::FsensorLevel,"LOW","");
  6719. return(false);
  6720. }
  6721. if((bPCBrev04 ? 1 : 0) != (uint8_t)oFsensorPCB){ // safer then "(uint8_t)bPCBrev04"
  6722. oFsensorPCB=bPCBrev04 ? ClFsensorPCB::_Rev04 : ClFsensorPCB::_Old;
  6723. printf_IRSensorAnalogBoardChange();
  6724. eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_PCB,(uint8_t)oFsensorPCB);
  6725. }
  6726. return(true);
  6727. }
  6728. static void lcd_detect_IRsensor(){
  6729. bool bAction;
  6730. bool loaded;
  6731. bMenuFSDetect = true; // inhibits some code inside "manage_inactivity()"
  6732. /// Check if filament is loaded. If it is loaded stop detection.
  6733. /// @todo Add autodetection with MMU2s
  6734. loaded = ! READ(IR_SENSOR_PIN);
  6735. if(loaded ){
  6736. lcd_show_fullscreen_message_and_wait_P(_i("Please unload the filament first, then repeat this action."));
  6737. return;
  6738. } else {
  6739. lcd_show_fullscreen_message_and_wait_P(_i("Please check the IR sensor connection, unload filament if present."));
  6740. bAction = lcd_selftest_IRsensor(true);
  6741. }
  6742. if(bAction){
  6743. lcd_show_fullscreen_message_and_wait_P(_i("Sensor verified, remove the filament now."));////c=20 r=3
  6744. // the fsensor board has been successfully identified, any previous "not responding" may be cleared now
  6745. fsensor_not_responding = false;
  6746. } else {
  6747. lcd_show_fullscreen_message_and_wait_P(_i("Verification failed, remove the filament and try again."));////c=20 r=5
  6748. // here it is unclear what to to with the fsensor_not_responding flag
  6749. }
  6750. bMenuFSDetect=false; // de-inhibits some code inside "manage_inactivity()"
  6751. }
  6752. #endif //IR_SENSOR_ANALOG
  6753. static void lcd_selftest_v()
  6754. {
  6755. (void)lcd_selftest();
  6756. }
  6757. bool lcd_selftest()
  6758. {
  6759. int _progress = 0;
  6760. bool _result = true;
  6761. bool _swapped_fan = false;
  6762. #ifdef IR_SENSOR_ANALOG
  6763. //! Check if IR sensor is in unknown state, if so run Fsensor Detection
  6764. //! As the Fsensor Detection isn't yet ready for the mmu2s we set temporarily the IR sensor 0.3 or older for mmu2s
  6765. //! @todo Don't forget to remove this as soon Fsensor Detection works with mmu
  6766. if( oFsensorPCB == ClFsensorPCB::_Undef) {
  6767. if (!mmu_enabled) {
  6768. lcd_detect_IRsensor();
  6769. }
  6770. else {
  6771. eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_PCB,0);
  6772. }
  6773. }
  6774. #endif //IR_SENSOR_ANALOG
  6775. lcd_wait_for_cool_down();
  6776. lcd_clear();
  6777. lcd_set_cursor(0, 0); lcd_puts_P(_i("Self test start "));////MSG_SELFTEST_START c=20
  6778. #ifdef TMC2130
  6779. FORCE_HIGH_POWER_START;
  6780. #endif // TMC2130
  6781. FORCE_BL_ON_START;
  6782. _delay(2000);
  6783. KEEPALIVE_STATE(IN_HANDLER);
  6784. _progress = lcd_selftest_screen(TestScreen::ExtruderFan, _progress, 3, true, 2000);
  6785. #if (defined(FANCHECK) && defined(TACH_0))
  6786. switch (lcd_selftest_fan_auto(0)){ // check extruder Fan
  6787. case FanCheck::ExtruderFan:
  6788. _result = false;
  6789. break;
  6790. case FanCheck::SwappedFan:
  6791. _swapped_fan = true;
  6792. // no break
  6793. default:
  6794. _result = true;
  6795. break;
  6796. }
  6797. #else //defined(TACH_0)
  6798. _result = lcd_selftest_manual_fan_check(0, false);
  6799. #endif //defined(TACH_0)
  6800. if (!_result)
  6801. {
  6802. lcd_selftest_error(TestError::ExtruderFan, "", "");
  6803. }
  6804. if (_result)
  6805. {
  6806. _progress = lcd_selftest_screen(TestScreen::PrintFan, _progress, 3, true, 2000);
  6807. #if (defined(FANCHECK) && defined(TACH_1))
  6808. switch (lcd_selftest_fan_auto(1)){ // check print fan
  6809. case FanCheck::PrintFan:
  6810. _result = false;
  6811. break;
  6812. case FanCheck::SwappedFan:
  6813. _swapped_fan = true;
  6814. // no break
  6815. default:
  6816. _result = true;
  6817. break;
  6818. }
  6819. #else //defined(TACH_1)
  6820. _result = lcd_selftest_manual_fan_check(1, false);
  6821. #endif //defined(TACH_1)
  6822. if (!_result)
  6823. {
  6824. lcd_selftest_error(TestError::PrintFan, "", ""); //print fan not spinning
  6825. }
  6826. }
  6827. if (_swapped_fan) {
  6828. //turn on print fan and check that left extruder fan is not spinning
  6829. _result = lcd_selftest_manual_fan_check(1, true);
  6830. if (_result) {
  6831. //print fan is stil turned on; check that it is spinning
  6832. _result = lcd_selftest_manual_fan_check(1, false, true);
  6833. if (!_result){
  6834. lcd_selftest_error(TestError::PrintFan, "", "");
  6835. }
  6836. }
  6837. else {
  6838. // fans are swapped
  6839. lcd_selftest_error(TestError::SwappedFan, "", "");
  6840. }
  6841. }
  6842. if (_result)
  6843. {
  6844. _progress = lcd_selftest_screen(TestScreen::FansOk, _progress, 3, true, 2000);
  6845. _result = lcd_selfcheck_endstops(); //With TMC2130, only the Z probe is tested.
  6846. }
  6847. if (_result)
  6848. {
  6849. //current_position[Z_AXIS] += 15; //move Z axis higher to avoid false triggering of Z end stop in case that we are very low - just above heatbed
  6850. _progress = lcd_selftest_screen(TestScreen::AxisX, _progress, 3, true, 2000);
  6851. #ifdef TMC2130
  6852. _result = lcd_selfcheck_axis_sg(X_AXIS);
  6853. #else
  6854. _result = lcd_selfcheck_axis(X_AXIS, X_MAX_POS);
  6855. #endif //TMC2130
  6856. }
  6857. if (_result)
  6858. {
  6859. _progress = lcd_selftest_screen(TestScreen::AxisX, _progress, 3, true, 0);
  6860. #ifndef TMC2130
  6861. _result = lcd_selfcheck_pulleys(X_AXIS);
  6862. #endif
  6863. }
  6864. if (_result)
  6865. {
  6866. _progress = lcd_selftest_screen(TestScreen::AxisY, _progress, 3, true, 1500);
  6867. #ifdef TMC2130
  6868. _result = lcd_selfcheck_axis_sg(Y_AXIS);
  6869. #else
  6870. _result = lcd_selfcheck_axis(Y_AXIS, Y_MAX_POS);
  6871. #endif // TMC2130
  6872. }
  6873. if (_result)
  6874. {
  6875. _progress = lcd_selftest_screen(TestScreen::AxisZ, _progress, 3, true, 0);
  6876. #ifndef TMC2130
  6877. _result = lcd_selfcheck_pulleys(Y_AXIS);
  6878. #endif // TMC2130
  6879. }
  6880. if (_result)
  6881. {
  6882. #ifdef TMC2130
  6883. tmc2130_home_exit();
  6884. enable_endstops(false);
  6885. #endif
  6886. //homeaxis(X_AXIS);
  6887. //homeaxis(Y_AXIS);
  6888. current_position[X_AXIS] = pgm_read_float(bed_ref_points_4);
  6889. current_position[Y_AXIS] = pgm_read_float(bed_ref_points_4+1);
  6890. #ifdef TMC2130
  6891. //current_position[X_AXIS] += 0;
  6892. current_position[Y_AXIS] += 4;
  6893. #endif //TMC2130
  6894. current_position[Z_AXIS] = current_position[Z_AXIS] + 10;
  6895. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6896. st_synchronize();
  6897. set_destination_to_current();
  6898. _progress = lcd_selftest_screen(TestScreen::AxisZ, _progress, 3, true, 1500);
  6899. #ifdef TMC2130
  6900. homeaxis(Z_AXIS); //In case of failure, the code gets stuck in this function.
  6901. #else
  6902. _result = lcd_selfcheck_axis(Z_AXIS, Z_MAX_POS);
  6903. #endif //TMC2130
  6904. //raise Z to not damage the bed during and hotend testing
  6905. current_position[Z_AXIS] += 20;
  6906. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6907. st_synchronize();
  6908. }
  6909. #ifdef TMC2130
  6910. if (_result)
  6911. {
  6912. current_position[Z_AXIS] = current_position[Z_AXIS] + 10;
  6913. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6914. st_synchronize();
  6915. _progress = lcd_selftest_screen(TestScreen::Home, 0, 2, true, 0);
  6916. bool bres = tmc2130_home_calibrate(X_AXIS);
  6917. _progress = lcd_selftest_screen(TestScreen::Home, 1, 2, true, 0);
  6918. bres &= tmc2130_home_calibrate(Y_AXIS);
  6919. _progress = lcd_selftest_screen(TestScreen::Home, 2, 2, true, 0);
  6920. if (bres)
  6921. eeprom_update_byte((uint8_t*)EEPROM_TMC2130_HOME_ENABLED, 1);
  6922. _result = bres;
  6923. }
  6924. #endif //TMC2130
  6925. if (_result)
  6926. {
  6927. _progress = lcd_selftest_screen(TestScreen::Bed, _progress, 3, true, 2000);
  6928. _result = lcd_selfcheck_check_heater(true);
  6929. }
  6930. if (_result)
  6931. {
  6932. _progress = lcd_selftest_screen(TestScreen::Hotend, _progress, 3, true, 1000);
  6933. _result = lcd_selfcheck_check_heater(false);
  6934. }
  6935. if (_result)
  6936. {
  6937. _progress = lcd_selftest_screen(TestScreen::HotendOk, _progress, 3, true, 2000); //nozzle ok
  6938. }
  6939. #ifdef FILAMENT_SENSOR
  6940. if (_result)
  6941. {
  6942. if (mmu_enabled)
  6943. {
  6944. _progress = lcd_selftest_screen(TestScreen::Fsensor, _progress, 3, true, 2000); //check filaments sensor
  6945. _result = selftest_irsensor();
  6946. if (_result)
  6947. {
  6948. _progress = lcd_selftest_screen(TestScreen::FsensorOk, _progress, 3, true, 2000); //fil sensor OK
  6949. }
  6950. } else
  6951. {
  6952. #ifdef PAT9125
  6953. _progress = lcd_selftest_screen(TestScreen::Fsensor, _progress, 3, true, 2000); //check filaments sensor
  6954. _result = lcd_selftest_fsensor();
  6955. if (_result)
  6956. {
  6957. _progress = lcd_selftest_screen(TestScreen::FsensorOk, _progress, 3, true, 2000); //fil sensor OK
  6958. }
  6959. #endif //PAT9125
  6960. #if 0
  6961. // Intentionally disabled - that's why we moved the detection to runtime by just checking the two voltages.
  6962. // The idea is not to force the user to remove and insert the filament on an assembled printer.
  6963. //def IR_SENSOR_ANALOG
  6964. _progress = lcd_selftest_screen(TestScreen::Fsensor, _progress, 3, true, 2000); //check filament sensor
  6965. _result = lcd_selftest_IRsensor();
  6966. if (_result)
  6967. {
  6968. _progress = lcd_selftest_screen(TestScreen::FsensorOk, _progress, 3, true, 2000); //filament sensor OK
  6969. }
  6970. #endif //IR_SENSOR_ANALOG
  6971. }
  6972. }
  6973. #endif //FILAMENT_SENSOR
  6974. if (_result)
  6975. {
  6976. _progress = lcd_selftest_screen(TestScreen::AllCorrect, _progress, 3, true, 5000); //all correct
  6977. }
  6978. else
  6979. {
  6980. _progress = lcd_selftest_screen(TestScreen::Failed, _progress, 3, true, 5000);
  6981. }
  6982. lcd_reset_alert_level();
  6983. enquecommand_P(PSTR("M84"));
  6984. lcd_update_enable(true);
  6985. if (_result)
  6986. {
  6987. LCD_ALERTMESSAGERPGM(_i("Self test OK"));////MSG_SELFTEST_OK
  6988. }
  6989. else
  6990. {
  6991. LCD_ALERTMESSAGERPGM(_T(MSG_SELFTEST_FAILED));
  6992. }
  6993. #ifdef TMC2130
  6994. FORCE_HIGH_POWER_END;
  6995. #endif // TMC2130
  6996. FORCE_BL_ON_END;
  6997. KEEPALIVE_STATE(NOT_BUSY);
  6998. return(_result);
  6999. }
  7000. #ifdef TMC2130
  7001. static void reset_crash_det(unsigned char axis) {
  7002. current_position[axis] += 10;
  7003. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7004. st_synchronize();
  7005. if (eeprom_read_byte((uint8_t*)EEPROM_CRASH_DET)) tmc2130_sg_stop_on_crash = true;
  7006. }
  7007. static bool lcd_selfcheck_axis_sg(unsigned char axis) {
  7008. // each axis length is measured twice
  7009. float axis_length, current_position_init, current_position_final;
  7010. float measured_axis_length[2];
  7011. float margin = 60;
  7012. float max_error_mm = 5;
  7013. switch (axis) {
  7014. case 0: axis_length = X_MAX_POS; break;
  7015. case 1: axis_length = Y_MAX_POS + 8; break;
  7016. default: axis_length = 210; break;
  7017. }
  7018. tmc2130_sg_stop_on_crash = false;
  7019. tmc2130_home_exit();
  7020. enable_endstops(true);
  7021. raise_z_above(MESH_HOME_Z_SEARCH);
  7022. st_synchronize();
  7023. tmc2130_home_enter(1 << axis);
  7024. // first axis length measurement begin
  7025. current_position[axis] -= (axis_length + margin);
  7026. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7027. st_synchronize();
  7028. tmc2130_sg_meassure_start(axis);
  7029. current_position_init = st_get_position_mm(axis);
  7030. current_position[axis] += 2 * margin;
  7031. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7032. st_synchronize();
  7033. current_position[axis] += axis_length;
  7034. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7035. st_synchronize();
  7036. uint16_t sg1 = tmc2130_sg_meassure_stop();
  7037. printf_P(PSTR("%c AXIS SG1=%d\n"), 'X'+axis, sg1);
  7038. eeprom_write_word(((uint16_t*)((axis == X_AXIS)?EEPROM_BELTSTATUS_X:EEPROM_BELTSTATUS_Y)), sg1);
  7039. current_position_final = st_get_position_mm(axis);
  7040. measured_axis_length[0] = abs(current_position_final - current_position_init);
  7041. // first measurement end and second measurement begin
  7042. current_position[axis] -= margin;
  7043. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7044. st_synchronize();
  7045. current_position[axis] -= (axis_length + margin);
  7046. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7047. st_synchronize();
  7048. current_position_init = st_get_position_mm(axis);
  7049. measured_axis_length[1] = abs(current_position_final - current_position_init);
  7050. tmc2130_home_exit();
  7051. //end of second measurement, now check for possible errors:
  7052. for(uint_least8_t i = 0; i < 2; i++){ //check if measured axis length corresponds to expected length
  7053. printf_P(_N("Measured axis length:%.3f\n"), measured_axis_length[i]);
  7054. if (abs(measured_axis_length[i] - axis_length) > max_error_mm) {
  7055. enable_endstops(false);
  7056. const char *_error_1;
  7057. if (axis == X_AXIS) _error_1 = "X";
  7058. if (axis == Y_AXIS) _error_1 = "Y";
  7059. if (axis == Z_AXIS) _error_1 = "Z";
  7060. lcd_selftest_error(TestError::Axis, _error_1, "");
  7061. current_position[axis] = 0;
  7062. plan_set_position_curposXYZE();
  7063. reset_crash_det(axis);
  7064. enable_endstops(true);
  7065. endstops_hit_on_purpose();
  7066. return false;
  7067. }
  7068. }
  7069. printf_P(_N("Axis length difference:%.3f\n"), abs(measured_axis_length[0] - measured_axis_length[1]));
  7070. if (abs(measured_axis_length[0] - measured_axis_length[1]) > 1) { //check if difference between first and second measurement is low
  7071. //loose pulleys
  7072. const char *_error_1;
  7073. if (axis == X_AXIS) _error_1 = "X";
  7074. if (axis == Y_AXIS) _error_1 = "Y";
  7075. if (axis == Z_AXIS) _error_1 = "Z";
  7076. lcd_selftest_error(TestError::Pulley, _error_1, "");
  7077. current_position[axis] = 0;
  7078. plan_set_position_curposXYZE();
  7079. reset_crash_det(axis);
  7080. endstops_hit_on_purpose();
  7081. return false;
  7082. }
  7083. current_position[axis] = 0;
  7084. plan_set_position_curposXYZE();
  7085. reset_crash_det(axis);
  7086. endstops_hit_on_purpose();
  7087. return true;
  7088. }
  7089. #endif //TMC2130
  7090. #ifndef TMC2130
  7091. static bool lcd_selfcheck_axis(int _axis, int _travel)
  7092. {
  7093. // printf_P(PSTR("lcd_selfcheck_axis %d, %d\n"), _axis, _travel);
  7094. bool _stepdone = false;
  7095. bool _stepresult = false;
  7096. int _progress = 0;
  7097. int _travel_done = 0;
  7098. int _err_endstop = 0;
  7099. int _lcd_refresh = 0;
  7100. _travel = _travel + (_travel / 10);
  7101. if (_axis == X_AXIS) {
  7102. current_position[Z_AXIS] += 17;
  7103. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7104. }
  7105. do {
  7106. current_position[_axis] = current_position[_axis] - 1;
  7107. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7108. st_synchronize();
  7109. #ifdef TMC2130
  7110. if ((READ(Z_MIN_PIN) ^ (bool)Z_MIN_ENDSTOP_INVERTING))
  7111. #else //TMC2130
  7112. if ((READ(X_MIN_PIN) ^ (bool)X_MIN_ENDSTOP_INVERTING) ||
  7113. (READ(Y_MIN_PIN) ^ (bool)Y_MIN_ENDSTOP_INVERTING) ||
  7114. (READ(Z_MIN_PIN) ^ (bool)Z_MIN_ENDSTOP_INVERTING))
  7115. #endif //TMC2130
  7116. {
  7117. if (_axis == 0)
  7118. {
  7119. _stepresult = ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ? true : false;
  7120. _err_endstop = ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) ? 1 : 2;
  7121. }
  7122. if (_axis == 1)
  7123. {
  7124. _stepresult = ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) ? true : false;
  7125. _err_endstop = ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ? 0 : 2;
  7126. }
  7127. if (_axis == 2)
  7128. {
  7129. _stepresult = ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1) ? true : false;
  7130. _err_endstop = ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ? 0 : 1;
  7131. printf_P(PSTR("lcd_selfcheck_axis %d, %d\n"), _stepresult, _err_endstop);
  7132. /*disable_x();
  7133. disable_y();
  7134. disable_z();*/
  7135. }
  7136. _stepdone = true;
  7137. }
  7138. if (_lcd_refresh < 6)
  7139. {
  7140. _lcd_refresh++;
  7141. }
  7142. else
  7143. {
  7144. _progress = lcd_selftest_screen(static_cast<TestScreen>(static_cast<int>(TestScreen::AxisX) + _axis), _progress, 3, false, 0);
  7145. _lcd_refresh = 0;
  7146. }
  7147. manage_heater();
  7148. manage_inactivity(true);
  7149. //_delay(100);
  7150. (_travel_done <= _travel) ? _travel_done++ : _stepdone = true;
  7151. } while (!_stepdone);
  7152. //current_position[_axis] = current_position[_axis] + 15;
  7153. //plan_buffer_line_curposXYZE(manual_feedrate[0] / 60, active_extruder);
  7154. if (!_stepresult)
  7155. {
  7156. const char *_error_1;
  7157. const char *_error_2;
  7158. if (_axis == X_AXIS) _error_1 = "X";
  7159. if (_axis == Y_AXIS) _error_1 = "Y";
  7160. if (_axis == Z_AXIS) _error_1 = "Z";
  7161. if (_err_endstop == 0) _error_2 = "X";
  7162. if (_err_endstop == 1) _error_2 = "Y";
  7163. if (_err_endstop == 2) _error_2 = "Z";
  7164. if (_travel_done >= _travel)
  7165. {
  7166. lcd_selftest_error(TestError::Endstop, _error_1, _error_2);
  7167. }
  7168. else
  7169. {
  7170. lcd_selftest_error(TestError::Motor, _error_1, _error_2);
  7171. }
  7172. }
  7173. current_position[_axis] = 0; //simulate axis home to avoid negative numbers for axis position, especially Z.
  7174. plan_set_position_curposXYZE();
  7175. return _stepresult;
  7176. }
  7177. static bool lcd_selfcheck_pulleys(int axis)
  7178. {
  7179. float tmp_motor_loud[3] = DEFAULT_PWM_MOTOR_CURRENT_LOUD;
  7180. float tmp_motor[3] = DEFAULT_PWM_MOTOR_CURRENT;
  7181. float current_position_init;
  7182. float move;
  7183. bool endstop_triggered = false;
  7184. int i;
  7185. unsigned long timeout_counter;
  7186. refresh_cmd_timeout();
  7187. manage_inactivity(true);
  7188. if (axis == 0) move = 50; //X_AXIS
  7189. else move = 50; //Y_AXIS
  7190. current_position_init = current_position[axis];
  7191. current_position[axis] += 2;
  7192. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7193. for (i = 0; i < 5; i++) {
  7194. refresh_cmd_timeout();
  7195. current_position[axis] = current_position[axis] + move;
  7196. st_current_set(0, 850); //set motor current higher
  7197. plan_buffer_line_curposXYZE(200);
  7198. st_synchronize();
  7199. if (SilentModeMenu != SILENT_MODE_OFF) st_current_set(0, tmp_motor[0]); //set back to normal operation currents
  7200. else st_current_set(0, tmp_motor_loud[0]); //set motor current back
  7201. current_position[axis] = current_position[axis] - move;
  7202. plan_buffer_line_curposXYZE(50);
  7203. st_synchronize();
  7204. if (((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ||
  7205. ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1)) {
  7206. lcd_selftest_error(TestError::Pulley, (axis == 0) ? "X" : "Y", "");
  7207. return(false);
  7208. }
  7209. }
  7210. timeout_counter = _millis() + 2500;
  7211. endstop_triggered = false;
  7212. manage_inactivity(true);
  7213. while (!endstop_triggered) {
  7214. if (((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ||
  7215. ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1)) {
  7216. endstop_triggered = true;
  7217. if (current_position_init - 1 <= current_position[axis] && current_position_init + 1 >= current_position[axis]) {
  7218. current_position[axis] += 10;
  7219. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7220. st_synchronize();
  7221. return(true);
  7222. }
  7223. else {
  7224. lcd_selftest_error(TestError::Pulley, (axis == 0) ? "X" : "Y", "");
  7225. return(false);
  7226. }
  7227. }
  7228. else {
  7229. current_position[axis] -= 1;
  7230. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7231. st_synchronize();
  7232. if (_millis() > timeout_counter) {
  7233. lcd_selftest_error(TestError::Pulley, (axis == 0) ? "X" : "Y", "");
  7234. return(false);
  7235. }
  7236. }
  7237. }
  7238. return(true);
  7239. }
  7240. #endif //not defined TMC2130
  7241. static bool lcd_selfcheck_endstops()
  7242. {
  7243. bool _result = true;
  7244. if (
  7245. #ifndef TMC2130
  7246. ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ||
  7247. ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) ||
  7248. #endif //!TMC2130
  7249. ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1))
  7250. {
  7251. #ifndef TMC2130
  7252. if ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) current_position[0] += 10;
  7253. if ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) current_position[1] += 10;
  7254. #endif //!TMC2130
  7255. if ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1) current_position[2] += 10;
  7256. }
  7257. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7258. st_synchronize();
  7259. if (
  7260. #ifndef TMC2130
  7261. ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ||
  7262. ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) ||
  7263. #endif //!TMC2130
  7264. ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1))
  7265. {
  7266. _result = false;
  7267. char _error[4] = "";
  7268. #ifndef TMC2130
  7269. if ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "X");
  7270. if ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "Y");
  7271. #endif //!TMC2130
  7272. if ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "Z");
  7273. lcd_selftest_error(TestError::Endstops, _error, "");
  7274. }
  7275. manage_heater();
  7276. manage_inactivity(true);
  7277. return _result;
  7278. }
  7279. static bool lcd_selfcheck_check_heater(bool _isbed)
  7280. {
  7281. int _counter = 0;
  7282. int _progress = 0;
  7283. bool _stepresult = false;
  7284. bool _docycle = true;
  7285. int _checked_snapshot = (_isbed) ? degBed() : degHotend(0);
  7286. int _opposite_snapshot = (_isbed) ? degHotend(0) : degBed();
  7287. int _cycles = (_isbed) ? 180 : 60; //~ 90s / 30s
  7288. target_temperature[0] = (_isbed) ? 0 : 200;
  7289. target_temperature_bed = (_isbed) ? 100 : 0;
  7290. manage_heater();
  7291. manage_inactivity(true);
  7292. KEEPALIVE_STATE(NOT_BUSY); //we are sending temperatures on serial line, so no need to send host keepalive messages
  7293. do {
  7294. _counter++;
  7295. _docycle = (_counter < _cycles) ? true : false;
  7296. manage_heater();
  7297. manage_inactivity(true);
  7298. _progress = (_isbed) ? lcd_selftest_screen(TestScreen::Bed, _progress, 2, false, 400) : lcd_selftest_screen(TestScreen::Hotend, _progress, 2, false, 400);
  7299. /*if (_isbed) {
  7300. MYSERIAL.print("Bed temp:");
  7301. MYSERIAL.println(degBed());
  7302. }
  7303. else {
  7304. MYSERIAL.print("Hotend temp:");
  7305. MYSERIAL.println(degHotend(0));
  7306. }*/
  7307. if(_counter%5 == 0) serialecho_temperatures(); //show temperatures once in two seconds
  7308. } while (_docycle);
  7309. target_temperature[0] = 0;
  7310. target_temperature_bed = 0;
  7311. manage_heater();
  7312. int _checked_result = (_isbed) ? degBed() - _checked_snapshot : degHotend(0) - _checked_snapshot;
  7313. int _opposite_result = (_isbed) ? degHotend(0) - _opposite_snapshot : degBed() - _opposite_snapshot;
  7314. /*
  7315. MYSERIAL.println("");
  7316. MYSERIAL.print("Checked result:");
  7317. MYSERIAL.println(_checked_result);
  7318. MYSERIAL.print("Opposite result:");
  7319. MYSERIAL.println(_opposite_result);
  7320. */
  7321. if (_opposite_result < ((_isbed) ? 30 : 9))
  7322. {
  7323. if (_checked_result >= ((_isbed) ? 9 : 30))
  7324. {
  7325. _stepresult = true;
  7326. }
  7327. else
  7328. {
  7329. lcd_selftest_error(TestError::Heater, "", "");
  7330. }
  7331. }
  7332. else
  7333. {
  7334. lcd_selftest_error(TestError::Bed, "", "");
  7335. }
  7336. manage_heater();
  7337. manage_inactivity(true);
  7338. KEEPALIVE_STATE(IN_HANDLER);
  7339. return _stepresult;
  7340. }
  7341. static void lcd_selftest_error(TestError testError, const char *_error_1, const char *_error_2)
  7342. {
  7343. lcd_beeper_quick_feedback();
  7344. FORCE_BL_ON_END;
  7345. target_temperature[0] = 0;
  7346. target_temperature_bed = 0;
  7347. manage_heater();
  7348. manage_inactivity();
  7349. lcd_clear();
  7350. lcd_set_cursor(0, 0);
  7351. lcd_puts_P(_i("Selftest error !"));////MSG_SELFTEST_ERROR
  7352. lcd_set_cursor(0, 1);
  7353. lcd_puts_P(_i("Please check :"));////MSG_SELFTEST_PLEASECHECK
  7354. switch (testError)
  7355. {
  7356. case TestError::Heater:
  7357. lcd_set_cursor(0, 2);
  7358. lcd_puts_P(_i("Heater/Thermistor"));////MSG_SELFTEST_HEATERTHERMISTOR
  7359. lcd_set_cursor(0, 3);
  7360. lcd_puts_P(_i("Not connected"));////MSG_SELFTEST_NOTCONNECTED
  7361. break;
  7362. case TestError::Bed:
  7363. lcd_set_cursor(0, 2);
  7364. lcd_puts_P(_i("Bed / Heater"));////MSG_SELFTEST_BEDHEATER
  7365. lcd_set_cursor(0, 3);
  7366. lcd_puts_P(_T(MSG_SELFTEST_WIRINGERROR));
  7367. break;
  7368. case TestError::Endstops:
  7369. lcd_set_cursor(0, 2);
  7370. lcd_puts_P(_i("Endstops"));////MSG_SELFTEST_ENDSTOPS
  7371. lcd_set_cursor(0, 3);
  7372. lcd_puts_P(_T(MSG_SELFTEST_WIRINGERROR));
  7373. lcd_set_cursor(17, 3);
  7374. lcd_print(_error_1);
  7375. break;
  7376. case TestError::Motor:
  7377. lcd_set_cursor(0, 2);
  7378. lcd_puts_P(_T(MSG_SELFTEST_MOTOR));
  7379. lcd_set_cursor(18, 2);
  7380. lcd_print(_error_1);
  7381. lcd_set_cursor(0, 3);
  7382. lcd_puts_P(_i("Endstop"));////MSG_SELFTEST_ENDSTOP
  7383. lcd_set_cursor(18, 3);
  7384. lcd_print(_error_2);
  7385. break;
  7386. case TestError::Endstop:
  7387. lcd_set_cursor(0, 2);
  7388. lcd_puts_P(_i("Endstop not hit"));////MSG_SELFTEST_ENDSTOP_NOTHIT c=20
  7389. lcd_set_cursor(0, 3);
  7390. lcd_puts_P(_T(MSG_SELFTEST_MOTOR));
  7391. lcd_set_cursor(18, 3);
  7392. lcd_print(_error_1);
  7393. break;
  7394. case TestError::PrintFan:
  7395. lcd_set_cursor(0, 2);
  7396. lcd_puts_P(_T(MSG_SELFTEST_COOLING_FAN));
  7397. lcd_set_cursor(0, 3);
  7398. lcd_puts_P(_T(MSG_SELFTEST_WIRINGERROR));
  7399. lcd_set_cursor(18, 3);
  7400. lcd_print(_error_1);
  7401. break;
  7402. case TestError::ExtruderFan:
  7403. lcd_set_cursor(0, 2);
  7404. lcd_puts_P(_T(MSG_SELFTEST_EXTRUDER_FAN));
  7405. lcd_set_cursor(0, 3);
  7406. lcd_puts_P(_T(MSG_SELFTEST_WIRINGERROR));
  7407. lcd_set_cursor(18, 3);
  7408. lcd_print(_error_1);
  7409. break;
  7410. case TestError::Pulley:
  7411. lcd_set_cursor(0, 2);
  7412. lcd_puts_P(_i("Loose pulley"));////MSG_LOOSE_PULLEY c=20 r=1
  7413. lcd_set_cursor(0, 3);
  7414. lcd_puts_P(_T(MSG_SELFTEST_MOTOR));
  7415. lcd_set_cursor(18, 3);
  7416. lcd_print(_error_1);
  7417. break;
  7418. case TestError::Axis:
  7419. lcd_set_cursor(0, 2);
  7420. lcd_puts_P(_i("Axis length"));////MSG_SELFTEST_AXIS_LENGTH
  7421. lcd_set_cursor(0, 3);
  7422. lcd_puts_P(_i("Axis"));////MSG_SELFTEST_AXIS
  7423. lcd_set_cursor(18, 3);
  7424. lcd_print(_error_1);
  7425. break;
  7426. case TestError::SwappedFan:
  7427. lcd_set_cursor(0, 2);
  7428. lcd_puts_P(_i("Front/left fans"));////MSG_SELFTEST_FANS
  7429. lcd_set_cursor(0, 3);
  7430. lcd_puts_P(_i("Swapped"));////MSG_SELFTEST_SWAPPED
  7431. lcd_set_cursor(18, 3);
  7432. lcd_print(_error_1);
  7433. break;
  7434. case TestError::WiringFsensor:
  7435. lcd_set_cursor(0, 2);
  7436. lcd_puts_P(_T(MSG_SELFTEST_FILAMENT_SENSOR));
  7437. lcd_set_cursor(0, 3);
  7438. lcd_puts_P(_T(MSG_SELFTEST_WIRINGERROR));
  7439. break;
  7440. case TestError::TriggeringFsensor:
  7441. lcd_set_cursor(0, 2);
  7442. lcd_puts_P(_T(MSG_SELFTEST_FILAMENT_SENSOR));
  7443. lcd_set_cursor(0, 3);
  7444. lcd_puts_P(_i("False triggering"));////c=20
  7445. break;
  7446. case TestError::FsensorLevel:
  7447. lcd_set_cursor(0, 2);
  7448. lcd_puts_P(_T(MSG_SELFTEST_FILAMENT_SENSOR));
  7449. lcd_set_cursor(0, 3);
  7450. lcd_printf_P(_i("%s level expected"),_error_1);////c=20
  7451. break;
  7452. }
  7453. _delay(1000);
  7454. lcd_beeper_quick_feedback();
  7455. do {
  7456. _delay(100);
  7457. manage_heater();
  7458. manage_inactivity();
  7459. } while (!lcd_clicked());
  7460. LCD_ALERTMESSAGERPGM(_T(MSG_SELFTEST_FAILED));
  7461. lcd_return_to_status();
  7462. }
  7463. #ifdef FILAMENT_SENSOR
  7464. #ifdef PAT9125
  7465. static bool lcd_selftest_fsensor(void)
  7466. {
  7467. fsensor_init();
  7468. if (fsensor_not_responding)
  7469. {
  7470. lcd_selftest_error(TestError::WiringFsensor, "", "");
  7471. }
  7472. return (!fsensor_not_responding);
  7473. }
  7474. #endif //PAT9125
  7475. //! @brief Self-test of infrared barrier filament sensor mounted on MK3S with MMUv2 printer
  7476. //!
  7477. //! Test whether sensor is not triggering filament presence when extruder idler is moving without filament.
  7478. //!
  7479. //! Steps:
  7480. //! * Backup current active extruder temperature
  7481. //! * Pre-heat to PLA extrude temperature.
  7482. //! * Unload filament possibly present.
  7483. //! * Move extruder idler same way as during filament load
  7484. //! and sample IR_SENSOR_PIN.
  7485. //! * Check that pin doesn't go low.
  7486. //!
  7487. //! @retval true passed
  7488. //! @retval false failed
  7489. static bool selftest_irsensor()
  7490. {
  7491. class TempBackup
  7492. {
  7493. public:
  7494. TempBackup():
  7495. m_temp(degTargetHotend(active_extruder)),
  7496. m_extruder(active_extruder){}
  7497. ~TempBackup(){setTargetHotend(m_temp,m_extruder);}
  7498. private:
  7499. float m_temp;
  7500. uint8_t m_extruder;
  7501. };
  7502. uint8_t progress;
  7503. {
  7504. TempBackup tempBackup;
  7505. setTargetHotend(ABS_PREHEAT_HOTEND_TEMP,active_extruder);
  7506. mmu_wait_for_heater_blocking();
  7507. progress = lcd_selftest_screen(TestScreen::Fsensor, 0, 1, true, 0);
  7508. mmu_filament_ramming();
  7509. }
  7510. progress = lcd_selftest_screen(TestScreen::Fsensor, progress, 1, true, 0);
  7511. mmu_command(MmuCmd::U0);
  7512. manage_response(false, false);
  7513. for(uint_least8_t i = 0; i < 200; ++i)
  7514. {
  7515. if (0 == (i % 32)) progress = lcd_selftest_screen(TestScreen::Fsensor, progress, 1, true, 0);
  7516. mmu_load_step(false);
  7517. while (blocks_queued())
  7518. {
  7519. if (READ(IR_SENSOR_PIN) == 0)
  7520. {
  7521. lcd_selftest_error(TestError::TriggeringFsensor, "", "");
  7522. return false;
  7523. }
  7524. #ifdef TMC2130
  7525. manage_heater();
  7526. // Vojtech: Don't disable motors inside the planner!
  7527. if (!tmc2130_update_sg())
  7528. {
  7529. manage_inactivity(true);
  7530. }
  7531. #else //TMC2130
  7532. manage_heater();
  7533. // Vojtech: Don't disable motors inside the planner!
  7534. manage_inactivity(true);
  7535. #endif //TMC2130
  7536. }
  7537. }
  7538. return true;
  7539. }
  7540. #endif //FILAMENT_SENSOR
  7541. static bool lcd_selftest_manual_fan_check(int _fan, bool check_opposite,
  7542. bool _default)
  7543. {
  7544. bool _result = check_opposite;
  7545. lcd_clear();
  7546. lcd_set_cursor(0, 0); lcd_puts_P(_T(MSG_SELFTEST_FAN));
  7547. switch (_fan)
  7548. {
  7549. case 0:
  7550. // extruder cooling fan
  7551. lcd_set_cursor(0, 1);
  7552. if(check_opposite == true) lcd_puts_P(_T(MSG_SELFTEST_COOLING_FAN));
  7553. else lcd_puts_P(_T(MSG_SELFTEST_EXTRUDER_FAN));
  7554. setExtruderAutoFanState(3);
  7555. break;
  7556. case 1:
  7557. // object cooling fan
  7558. lcd_set_cursor(0, 1);
  7559. if (check_opposite == true) lcd_puts_P(_T(MSG_SELFTEST_EXTRUDER_FAN));
  7560. else lcd_puts_P(_T(MSG_SELFTEST_COOLING_FAN));
  7561. SET_OUTPUT(FAN_PIN);
  7562. #ifdef FAN_SOFT_PWM
  7563. fanSpeedSoftPwm = 255;
  7564. #else //FAN_SOFT_PWM
  7565. analogWrite(FAN_PIN, 255);
  7566. #endif //FAN_SOFT_PWM
  7567. break;
  7568. }
  7569. _delay(500);
  7570. lcd_set_cursor(1, 2); lcd_puts_P(_T(MSG_SELFTEST_FAN_YES));
  7571. lcd_set_cursor(0, 3); lcd_print(">");
  7572. lcd_set_cursor(1, 3); lcd_puts_P(_T(MSG_SELFTEST_FAN_NO));
  7573. int8_t enc_dif = int(_default)*3;
  7574. KEEPALIVE_STATE(PAUSED_FOR_USER);
  7575. lcd_button_pressed = false;
  7576. do
  7577. {
  7578. if (abs((enc_dif - lcd_encoder_diff)) > 2) {
  7579. if (enc_dif > lcd_encoder_diff) {
  7580. _result = !check_opposite;
  7581. lcd_set_cursor(0, 2); lcd_print(">");
  7582. lcd_set_cursor(1, 2); lcd_puts_P(_T(MSG_SELFTEST_FAN_YES));
  7583. lcd_set_cursor(0, 3); lcd_print(" ");
  7584. lcd_set_cursor(1, 3); lcd_puts_P(_T(MSG_SELFTEST_FAN_NO));
  7585. }
  7586. if (enc_dif < lcd_encoder_diff) {
  7587. _result = check_opposite;
  7588. lcd_set_cursor(0, 2); lcd_print(" ");
  7589. lcd_set_cursor(1, 2); lcd_puts_P(_T(MSG_SELFTEST_FAN_YES));
  7590. lcd_set_cursor(0, 3); lcd_print(">");
  7591. lcd_set_cursor(1, 3); lcd_puts_P(_T(MSG_SELFTEST_FAN_NO));
  7592. }
  7593. enc_dif = 0;
  7594. lcd_encoder_diff = 0;
  7595. }
  7596. manage_heater();
  7597. _delay(100);
  7598. } while (!lcd_clicked());
  7599. KEEPALIVE_STATE(IN_HANDLER);
  7600. setExtruderAutoFanState(0);
  7601. SET_OUTPUT(FAN_PIN);
  7602. #ifdef FAN_SOFT_PWM
  7603. fanSpeedSoftPwm = 0;
  7604. #else //FAN_SOFT_PWM
  7605. analogWrite(FAN_PIN, 0);
  7606. #endif //FAN_SOFT_PWM
  7607. fanSpeed = 0;
  7608. manage_heater();
  7609. return _result;
  7610. }
  7611. #ifdef FANCHECK
  7612. static FanCheck lcd_selftest_fan_auto(int _fan)
  7613. {
  7614. switch (_fan) {
  7615. case 0:
  7616. fanSpeed = 0;
  7617. manage_heater(); //turn off fan
  7618. setExtruderAutoFanState(3); //extruder fan
  7619. #ifdef FAN_SOFT_PWM
  7620. extruder_autofan_last_check = _millis();
  7621. fan_measuring = true;
  7622. #endif //FAN_SOFT_PWM
  7623. _delay(2000);
  7624. setExtruderAutoFanState(0); //extruder fan
  7625. manage_heater(); //count average fan speed from 2s delay and turn off fans
  7626. printf_P(PSTR("Test 1:\n"));
  7627. printf_P(PSTR("Print fan speed: %d \n"), fan_speed[1]);
  7628. printf_P(PSTR("Extr fan speed: %d \n"), fan_speed[0]);
  7629. if (fan_speed[0] < 20) { // < 1200 RPM would mean either a faulty Noctua or Altfan
  7630. return FanCheck::ExtruderFan;
  7631. }
  7632. #ifdef FAN_SOFT_PWM
  7633. else if (fan_speed[0] > 50 ) { // printerFan is faster
  7634. return FanCheck::SwappedFan;
  7635. }
  7636. break;
  7637. #endif
  7638. case 1:
  7639. //will it work with Thotend > 50 C ?
  7640. #ifdef FAN_SOFT_PWM
  7641. fanSpeed = 255;
  7642. fanSpeedSoftPwm = 255;
  7643. extruder_autofan_last_check = _millis(); //store time when measurement starts
  7644. fan_measuring = true; //start fan measuring, rest is on manage_heater
  7645. #else //FAN_SOFT_PWM
  7646. fanSpeed = 150; //print fan
  7647. #endif //FAN_SOFT_PWM
  7648. for (uint8_t i = 0; i < 5; i++) {
  7649. delay_keep_alive(1000);
  7650. lcd_set_cursor(18, 3);
  7651. lcd_print("-");
  7652. delay_keep_alive(1000);
  7653. lcd_set_cursor(18, 3);
  7654. lcd_print("|");
  7655. }
  7656. fanSpeed = 0;
  7657. #ifdef FAN_SOFT_PWM
  7658. fanSpeedSoftPwm = 0;
  7659. #else //FAN_SOFT_PWM
  7660. manage_heater(); //turn off fan
  7661. manage_inactivity(true); //to turn off print fan
  7662. #endif //FAN_SOFT_PWM
  7663. printf_P(PSTR("Test 2:\n"));
  7664. printf_P(PSTR("Print fan speed: %d \n"), fan_speed[1]);
  7665. printf_P(PSTR("Extr fan speed: %d \n"), fan_speed[0]);
  7666. if (!fan_speed[1]) {
  7667. return FanCheck::PrintFan;
  7668. }
  7669. #ifdef FAN_SOFT_PWM
  7670. fanSpeed = 80;
  7671. fanSpeedSoftPwm = 80;
  7672. for (uint8_t i = 0; i < 5; i++) {
  7673. delay_keep_alive(1000);
  7674. lcd_set_cursor(18, 3);
  7675. lcd_print("-");
  7676. delay_keep_alive(1000);
  7677. lcd_set_cursor(18, 3);
  7678. lcd_print("|");
  7679. }
  7680. fanSpeed = 0;
  7681. // noctua speed is between 17 and 24, turbine more then 30
  7682. if (fan_speed[1] < 30) {
  7683. return FanCheck::SwappedFan;
  7684. }
  7685. #else
  7686. // fan is spinning, but measured RPM are too low for print fan, it must
  7687. // be left extruder fan
  7688. else if (fan_speed[1] < 34) {
  7689. return FanCheck::SwappedFan;
  7690. }
  7691. #endif //FAN_SOFT_PWM
  7692. break;
  7693. }
  7694. return FanCheck::Success;
  7695. }
  7696. #endif //FANCHECK
  7697. static int lcd_selftest_screen(TestScreen screen, int _progress, int _progress_scale, bool _clear, int _delay)
  7698. {
  7699. lcd_update_enable(false);
  7700. const char *_indicator = (_progress >= _progress_scale) ? "-" : "|";
  7701. if (_clear) lcd_clear();
  7702. lcd_set_cursor(0, 0);
  7703. if (screen == TestScreen::ExtruderFan) lcd_puts_P(_T(MSG_SELFTEST_FAN));
  7704. if (screen == TestScreen::PrintFan) lcd_puts_P(_T(MSG_SELFTEST_FAN));
  7705. if (screen == TestScreen::FansOk) lcd_puts_P(_T(MSG_SELFTEST_FAN));
  7706. if (screen == TestScreen::EndStops) lcd_puts_P(_i("Checking endstops"));////MSG_SELFTEST_CHECK_ENDSTOPS c=20
  7707. if (screen == TestScreen::AxisX) lcd_puts_P(_i("Checking X axis "));////MSG_SELFTEST_CHECK_X c=20
  7708. if (screen == TestScreen::AxisY) lcd_puts_P(_i("Checking Y axis "));////MSG_SELFTEST_CHECK_Y c=20
  7709. if (screen == TestScreen::AxisZ) lcd_puts_P(_i("Checking Z axis "));////MSG_SELFTEST_CHECK_Z c=20
  7710. if (screen == TestScreen::Bed) lcd_puts_P(_T(MSG_SELFTEST_CHECK_BED));
  7711. if (screen == TestScreen::Hotend
  7712. || screen == TestScreen::HotendOk) lcd_puts_P(_i("Checking hotend "));////MSG_SELFTEST_CHECK_HOTEND c=20
  7713. if (screen == TestScreen::Fsensor) lcd_puts_P(_T(MSG_SELFTEST_CHECK_FSENSOR));
  7714. if (screen == TestScreen::FsensorOk) lcd_puts_P(_T(MSG_SELFTEST_CHECK_FSENSOR));
  7715. if (screen == TestScreen::AllCorrect) lcd_puts_P(_i("All correct "));////MSG_SELFTEST_CHECK_ALLCORRECT c=20
  7716. if (screen == TestScreen::Failed) lcd_puts_P(_T(MSG_SELFTEST_FAILED));
  7717. if (screen == TestScreen::Home) lcd_puts_P(_i("Calibrating home"));////c=20 r=1
  7718. lcd_set_cursor(0, 1);
  7719. lcd_puts_P(separator);
  7720. if ((screen >= TestScreen::ExtruderFan) && (screen <= TestScreen::FansOk))
  7721. {
  7722. //SERIAL_ECHOLNPGM("Fan test");
  7723. lcd_puts_at_P(0, 2, _i("Extruder fan:"));////MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
  7724. lcd_set_cursor(18, 2);
  7725. (screen < TestScreen::PrintFan) ? lcd_print(_indicator) : lcd_print("OK");
  7726. lcd_puts_at_P(0, 3, _i("Print fan:"));////MSG_SELFTEST_PRINT_FAN_SPEED c=18
  7727. lcd_set_cursor(18, 3);
  7728. (screen < TestScreen::FansOk) ? lcd_print(_indicator) : lcd_print("OK");
  7729. }
  7730. else if (screen >= TestScreen::Fsensor && screen <= TestScreen::FsensorOk)
  7731. {
  7732. lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_FILAMENT_SENSOR));
  7733. lcd_putc(':');
  7734. lcd_set_cursor(18, 2);
  7735. (screen == TestScreen::Fsensor) ? lcd_print(_indicator) : lcd_print("OK");
  7736. }
  7737. else if (screen < TestScreen::Fsensor)
  7738. {
  7739. //SERIAL_ECHOLNPGM("Other tests");
  7740. TestScreen _step_block = TestScreen::AxisX;
  7741. lcd_selftest_screen_step(2, 2, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), "X", _indicator);
  7742. _step_block = TestScreen::AxisY;
  7743. lcd_selftest_screen_step(2, 8, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), "Y", _indicator);
  7744. _step_block = TestScreen::AxisZ;
  7745. lcd_selftest_screen_step(2, 14, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), "Z", _indicator);
  7746. _step_block = TestScreen::Bed;
  7747. lcd_selftest_screen_step(3, 0, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), "Bed", _indicator);
  7748. _step_block = TestScreen::Hotend;
  7749. lcd_selftest_screen_step(3, 9, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), "Hotend", _indicator);
  7750. }
  7751. if (_delay > 0) delay_keep_alive(_delay);
  7752. _progress++;
  7753. return (_progress >= _progress_scale * 2) ? 0 : _progress;
  7754. }
  7755. static void lcd_selftest_screen_step(int _row, int _col, int _state, const char *_name, const char *_indicator)
  7756. {
  7757. lcd_set_cursor(_col, _row);
  7758. switch (_state)
  7759. {
  7760. case 1:
  7761. lcd_print(_name);
  7762. lcd_set_cursor(_col + strlen(_name), _row);
  7763. lcd_print(":");
  7764. lcd_set_cursor(_col + strlen(_name) + 1, _row);
  7765. lcd_print(_indicator);
  7766. break;
  7767. case 2:
  7768. lcd_print(_name);
  7769. lcd_set_cursor(_col + strlen(_name), _row);
  7770. lcd_print(":");
  7771. lcd_set_cursor(_col + strlen(_name) + 1, _row);
  7772. lcd_print("OK");
  7773. break;
  7774. default:
  7775. lcd_print(_name);
  7776. }
  7777. }
  7778. /** End of menus **/
  7779. /** Menu action functions **/
  7780. static bool check_file(const char* filename) {
  7781. if (farm_mode) return true;
  7782. bool result = false;
  7783. uint32_t filesize;
  7784. card.openFile((char*)filename, true);
  7785. filesize = card.getFileSize();
  7786. if (filesize > END_FILE_SECTION) {
  7787. card.setIndex(filesize - END_FILE_SECTION);
  7788. }
  7789. while (!card.eof() && !result) {
  7790. card.sdprinting = true;
  7791. get_command();
  7792. result = check_commands();
  7793. }
  7794. card.printingHasFinished();
  7795. strncpy_P(lcd_status_message, _T(WELCOME_MSG), LCD_WIDTH);
  7796. lcd_finishstatus();
  7797. return result;
  7798. }
  7799. static void menu_action_sdfile(const char* filename)
  7800. {
  7801. loading_flag = false;
  7802. char cmd[30];
  7803. char* c;
  7804. bool result = true;
  7805. sprintf_P(cmd, PSTR("M23 %s"), filename);
  7806. for (c = &cmd[4]; *c; c++)
  7807. *c = tolower(*c);
  7808. const char end[5] = ".gco";
  7809. //we are storing just first 8 characters of 8.3 filename assuming that extension is always ".gco"
  7810. for (uint_least8_t i = 0; i < 8; i++) {
  7811. if (strcmp((cmd + i + 4), end) == 0) {
  7812. //filename is shorter then 8.3, store '\0' character on position where ".gco" string was found to terminate stored string properly
  7813. eeprom_write_byte((uint8_t*)EEPROM_FILENAME + i, '\0');
  7814. break;
  7815. }
  7816. else {
  7817. eeprom_write_byte((uint8_t*)EEPROM_FILENAME + i, cmd[i + 4]);
  7818. }
  7819. }
  7820. uint8_t depth = (uint8_t)card.getWorkDirDepth();
  7821. eeprom_write_byte((uint8_t*)EEPROM_DIR_DEPTH, depth);
  7822. for (uint_least8_t i = 0; i < depth; i++) {
  7823. for (uint_least8_t j = 0; j < 8; j++) {
  7824. eeprom_write_byte((uint8_t*)EEPROM_DIRS + j + 8 * i, dir_names[i][j]);
  7825. }
  7826. }
  7827. if (!check_file(filename)) {
  7828. result = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("File incomplete. Continue anyway?"), false, false);////MSG_FILE_INCOMPLETE c=20 r=3
  7829. lcd_update_enable(true);
  7830. }
  7831. if (result) {
  7832. enquecommand(cmd);
  7833. enquecommand_P(PSTR("M24"));
  7834. }
  7835. lcd_return_to_status();
  7836. }
  7837. void menu_action_sddirectory(const char* filename)
  7838. {
  7839. uint8_t depth = (uint8_t)card.getWorkDirDepth();
  7840. strcpy(dir_names[depth], filename);
  7841. MYSERIAL.println(dir_names[depth]);
  7842. card.chdir(filename);
  7843. lcd_encoder = 0;
  7844. }
  7845. /** LCD API **/
  7846. void ultralcd_init()
  7847. {
  7848. {
  7849. uint8_t autoDepleteRaw = eeprom_read_byte(reinterpret_cast<uint8_t*>(EEPROM_AUTO_DEPLETE));
  7850. if (0xff == autoDepleteRaw) lcd_autoDeplete = false;
  7851. else lcd_autoDeplete = autoDepleteRaw;
  7852. }
  7853. backlight_init();
  7854. lcd_init();
  7855. lcd_refresh();
  7856. lcd_longpress_func = menu_lcd_longpress_func;
  7857. lcd_charsetup_func = menu_lcd_charsetup_func;
  7858. lcd_lcdupdate_func = menu_lcd_lcdupdate_func;
  7859. menu_menu = lcd_status_screen;
  7860. menu_lcd_charsetup_func();
  7861. SET_INPUT(BTN_EN1);
  7862. SET_INPUT(BTN_EN2);
  7863. WRITE(BTN_EN1, HIGH);
  7864. WRITE(BTN_EN2, HIGH);
  7865. #if BTN_ENC > 0
  7866. SET_INPUT(BTN_ENC);
  7867. WRITE(BTN_ENC, HIGH);
  7868. #endif
  7869. #if defined (SDSUPPORT) && defined(SDCARDDETECT) && (SDCARDDETECT > 0)
  7870. pinMode(SDCARDDETECT, INPUT);
  7871. WRITE(SDCARDDETECT, HIGH);
  7872. lcd_oldcardstatus = IS_SD_INSERTED;
  7873. #endif//(SDCARDDETECT > 0)
  7874. lcd_encoder_diff = 0;
  7875. }
  7876. void lcd_printer_connected() {
  7877. printer_connected = true;
  7878. }
  7879. static void lcd_send_status() {
  7880. if (farm_mode && no_response && ((_millis() - NcTime) > (NC_TIME * 1000))) {
  7881. //send important status messages periodicaly
  7882. prusa_statistics(important_status, saved_filament_type);
  7883. NcTime = _millis();
  7884. #ifdef FARM_CONNECT_MESSAGE
  7885. lcd_connect_printer();
  7886. #endif //FARM_CONNECT_MESSAGE
  7887. }
  7888. }
  7889. #ifdef FARM_CONNECT_MESSAGE
  7890. static void lcd_connect_printer() {
  7891. lcd_update_enable(false);
  7892. lcd_clear();
  7893. int i = 0;
  7894. int t = 0;
  7895. lcd_set_custom_characters_progress();
  7896. lcd_puts_at_P(0, 0, _i("Connect printer to"));
  7897. lcd_puts_at_P(0, 1, _i("monitoring or hold"));
  7898. lcd_puts_at_P(0, 2, _i("the knob to continue"));
  7899. while (no_response) {
  7900. i++;
  7901. t++;
  7902. delay_keep_alive(100);
  7903. proc_commands();
  7904. if (t == 10) {
  7905. prusa_statistics(important_status, saved_filament_type);
  7906. t = 0;
  7907. }
  7908. if (READ(BTN_ENC)) { //if button is not pressed
  7909. i = 0;
  7910. lcd_puts_at_P(0, 3, PSTR(" "));
  7911. }
  7912. if (i!=0) lcd_puts_at_P((i * 20) / (NC_BUTTON_LONG_PRESS * 10), 3, "\x01");
  7913. if (i == NC_BUTTON_LONG_PRESS * 10) {
  7914. no_response = false;
  7915. }
  7916. }
  7917. lcd_set_custom_characters_degree();
  7918. lcd_update_enable(true);
  7919. lcd_update(2);
  7920. }
  7921. #endif //FARM_CONNECT_MESSAGE
  7922. void lcd_ping() { //chceck if printer is connected to monitoring when in farm mode
  7923. if (farm_mode) {
  7924. bool empty = is_buffer_empty();
  7925. if ((_millis() - PingTime) * 0.001 > (empty ? PING_TIME : PING_TIME_LONG)) { //if commands buffer is empty use shorter time period
  7926. //if there are comamnds in buffer, some long gcodes can delay execution of ping command
  7927. //therefore longer period is used
  7928. printer_connected = false;
  7929. }
  7930. else {
  7931. lcd_printer_connected();
  7932. }
  7933. }
  7934. }
  7935. void lcd_ignore_click(bool b)
  7936. {
  7937. ignore_click = b;
  7938. wait_for_unclick = false;
  7939. }
  7940. void lcd_finishstatus() {
  7941. SERIAL_PROTOCOLLNRPGM(MSG_LCD_STATUS_CHANGED);
  7942. int len = strlen(lcd_status_message);
  7943. if (len > 0) {
  7944. while (len < LCD_WIDTH) {
  7945. lcd_status_message[len++] = ' ';
  7946. }
  7947. }
  7948. lcd_status_message[LCD_WIDTH] = '\0';
  7949. lcd_draw_update = 2;
  7950. }
  7951. void lcd_setstatus(const char* message)
  7952. {
  7953. if (lcd_status_message_level > 0)
  7954. return;
  7955. lcd_updatestatus(message);
  7956. }
  7957. void lcd_updatestatuspgm(const char *message){
  7958. strncpy_P(lcd_status_message, message, LCD_WIDTH);
  7959. lcd_status_message[LCD_WIDTH] = 0;
  7960. lcd_finishstatus();
  7961. // hack lcd_draw_update to 1, i.e. without clear
  7962. lcd_draw_update = 1;
  7963. }
  7964. void lcd_setstatuspgm(const char* message)
  7965. {
  7966. if (lcd_status_message_level > 0)
  7967. return;
  7968. lcd_updatestatuspgm(message);
  7969. }
  7970. void lcd_updatestatus(const char *message){
  7971. strncpy(lcd_status_message, message, LCD_WIDTH);
  7972. lcd_status_message[LCD_WIDTH] = 0;
  7973. lcd_finishstatus();
  7974. // hack lcd_draw_update to 1, i.e. without clear
  7975. lcd_draw_update = 1;
  7976. }
  7977. void lcd_setalertstatuspgm(const char* message)
  7978. {
  7979. lcd_setstatuspgm(message);
  7980. lcd_status_message_level = 1;
  7981. lcd_return_to_status();
  7982. }
  7983. void lcd_setalertstatus(const char* message)
  7984. {
  7985. lcd_setstatus(message);
  7986. lcd_status_message_level = 1;
  7987. lcd_return_to_status();
  7988. }
  7989. void lcd_reset_alert_level()
  7990. {
  7991. lcd_status_message_level = 0;
  7992. }
  7993. uint8_t get_message_level()
  7994. {
  7995. return lcd_status_message_level;
  7996. }
  7997. void menu_lcd_longpress_func(void)
  7998. {
  7999. backlight_wake();
  8000. if (homing_flag || mesh_bed_leveling_flag || menu_menu == lcd_babystep_z || menu_menu == lcd_move_z)
  8001. {
  8002. // disable longpress during re-entry, while homing or calibration
  8003. lcd_quick_feedback();
  8004. return;
  8005. }
  8006. if (menu_menu == lcd_hw_setup_menu)
  8007. {
  8008. // only toggle the experimental menu visibility flag
  8009. lcd_quick_feedback();
  8010. lcd_experimental_toggle();
  8011. return;
  8012. }
  8013. // explicitely listed menus which are allowed to rise the move-z or live-adj-z functions
  8014. // The lists are not the same for both functions, so first decide which function is to be performed
  8015. if ( (moves_planned() || IS_SD_PRINTING || is_usb_printing )){ // long press as live-adj-z
  8016. if(( current_position[Z_AXIS] < Z_HEIGHT_HIDE_LIVE_ADJUST_MENU ) // only allow live-adj-z up to 2mm of print height
  8017. && ( menu_menu == lcd_status_screen // and in listed menus...
  8018. || menu_menu == lcd_main_menu
  8019. || menu_menu == lcd_tune_menu
  8020. || menu_menu == lcd_support_menu
  8021. )
  8022. ){
  8023. lcd_clear();
  8024. menu_submenu(lcd_babystep_z);
  8025. } else {
  8026. // otherwise consume the long press as normal click
  8027. if( menu_menu != lcd_status_screen )
  8028. menu_back();
  8029. }
  8030. } else { // long press as move-z
  8031. if(menu_menu == lcd_status_screen
  8032. || menu_menu == lcd_main_menu
  8033. || menu_menu == lcd_preheat_menu
  8034. || menu_menu == lcd_sdcard_menu
  8035. || menu_menu == lcd_settings_menu
  8036. || menu_menu == lcd_control_temperature_menu
  8037. #if (LANG_MODE != 0)
  8038. || menu_menu == lcd_language
  8039. #endif
  8040. || menu_menu == lcd_support_menu
  8041. ){
  8042. move_menu_scale = 1.0;
  8043. menu_submenu(lcd_move_z);
  8044. } else {
  8045. // otherwise consume the long press as normal click
  8046. if( menu_menu != lcd_status_screen )
  8047. menu_back();
  8048. }
  8049. }
  8050. }
  8051. void menu_lcd_charsetup_func(void)
  8052. {
  8053. if (menu_menu == lcd_status_screen)
  8054. lcd_set_custom_characters_degree();
  8055. else
  8056. lcd_set_custom_characters_arrows();
  8057. }
  8058. static inline bool z_menu_expired()
  8059. {
  8060. return (menu_menu == lcd_babystep_z
  8061. && lcd_timeoutToStatus.expired(LCD_TIMEOUT_TO_STATUS_BABYSTEP_Z));
  8062. }
  8063. static inline bool other_menu_expired()
  8064. {
  8065. return (menu_menu != lcd_status_screen
  8066. && menu_menu != lcd_babystep_z
  8067. && lcd_timeoutToStatus.expired(LCD_TIMEOUT_TO_STATUS));
  8068. }
  8069. static inline bool forced_menu_expire()
  8070. {
  8071. bool retval = (menu_menu != lcd_status_screen
  8072. && forceMenuExpire);
  8073. forceMenuExpire = false;
  8074. return retval;
  8075. }
  8076. void menu_lcd_lcdupdate_func(void)
  8077. {
  8078. #if (SDCARDDETECT > 0)
  8079. if ((IS_SD_INSERTED != lcd_oldcardstatus))
  8080. {
  8081. lcd_draw_update = 2;
  8082. lcd_oldcardstatus = IS_SD_INSERTED;
  8083. lcd_refresh(); // to maybe revive the LCD if static electricity killed it.
  8084. backlight_wake();
  8085. if (lcd_oldcardstatus)
  8086. {
  8087. card.initsd();
  8088. LCD_MESSAGERPGM(_T(WELCOME_MSG));
  8089. bMain=false; // flag (i.e. 'fake parameter') for 'lcd_sdcard_menu()' function
  8090. menu_submenu(lcd_sdcard_menu);
  8091. //get_description();
  8092. }
  8093. else
  8094. {
  8095. if(menu_menu==lcd_sdcard_menu)
  8096. menu_back();
  8097. card.release();
  8098. LCD_MESSAGERPGM(_i("Card removed"));////MSG_SD_REMOVED
  8099. }
  8100. }
  8101. #endif//CARDINSERTED
  8102. backlight_update();
  8103. if (lcd_next_update_millis < _millis())
  8104. {
  8105. if (abs(lcd_encoder_diff) >= ENCODER_PULSES_PER_STEP)
  8106. {
  8107. if (lcd_draw_update == 0)
  8108. lcd_draw_update = 1;
  8109. lcd_encoder += lcd_encoder_diff / ENCODER_PULSES_PER_STEP;
  8110. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  8111. lcd_encoder_diff = 0;
  8112. lcd_timeoutToStatus.start();
  8113. backlight_wake();
  8114. }
  8115. if (LCD_CLICKED)
  8116. {
  8117. lcd_timeoutToStatus.start();
  8118. backlight_wake();
  8119. }
  8120. (*menu_menu)();
  8121. if (z_menu_expired() || other_menu_expired() || forced_menu_expire())
  8122. {
  8123. // Exiting a menu. Let's call the menu function the last time with menu_leaving flag set to true
  8124. // to give it a chance to save its state.
  8125. // This is useful for example, when the babystep value has to be written into EEPROM.
  8126. if (menu_menu != NULL)
  8127. {
  8128. menu_leaving = 1;
  8129. (*menu_menu)();
  8130. menu_leaving = 0;
  8131. }
  8132. lcd_clear();
  8133. lcd_return_to_status();
  8134. lcd_draw_update = 2;
  8135. }
  8136. if (lcd_draw_update == 2) lcd_clear();
  8137. if (lcd_draw_update) lcd_draw_update--;
  8138. lcd_next_update_millis = _millis() + LCD_UPDATE_INTERVAL;
  8139. }
  8140. if (!SdFatUtil::test_stack_integrity()) stack_error();
  8141. lcd_ping(); //check that we have received ping command if we are in farm mode
  8142. lcd_send_status();
  8143. if (lcd_commands_type == LcdCommands::Layer1Cal) lcd_commands();
  8144. }
  8145. #ifdef TMC2130
  8146. //! @brief Is crash detection enabled?
  8147. //!
  8148. //! @retval true crash detection enabled
  8149. //! @retval false crash detection disabled
  8150. bool lcd_crash_detect_enabled()
  8151. {
  8152. return eeprom_read_byte((uint8_t*)EEPROM_CRASH_DET);
  8153. }
  8154. void lcd_crash_detect_enable()
  8155. {
  8156. tmc2130_sg_stop_on_crash = true;
  8157. eeprom_update_byte((uint8_t*)EEPROM_CRASH_DET, 0xFF);
  8158. }
  8159. void lcd_crash_detect_disable()
  8160. {
  8161. tmc2130_sg_stop_on_crash = false;
  8162. tmc2130_sg_crash = 0;
  8163. eeprom_update_byte((uint8_t*)EEPROM_CRASH_DET, 0x00);
  8164. }
  8165. #endif
  8166. void lcd_experimental_toggle()
  8167. {
  8168. uint8_t oldVal = eeprom_read_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY);
  8169. if (oldVal == EEPROM_EMPTY_VALUE)
  8170. oldVal = 0;
  8171. else
  8172. oldVal = !oldVal;
  8173. eeprom_update_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY, oldVal);
  8174. }
  8175. void lcd_experimental_menu()
  8176. {
  8177. MENU_BEGIN();
  8178. MENU_ITEM_BACK_P(_T(MSG_BACK));
  8179. #ifdef EXTRUDER_ALTFAN_DETECT
  8180. MENU_ITEM_TOGGLE_P(_N("ALTFAN det."), altfanOverride_get()?_T(MSG_OFF):_T(MSG_ON), altfanOverride_toggle);////MSG_MENU_ALTFAN c=18
  8181. #endif //EXTRUDER_ALTFAN_DETECT
  8182. MENU_END();
  8183. }