Marlin_main.cpp 328 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126212721282129213021312132213321342135213621372138213921402141214221432144214521462147214821492150215121522153215421552156215721582159216021612162216321642165216621672168216921702171217221732174217521762177217821792180218121822183218421852186218721882189219021912192219321942195219621972198219922002201220222032204220522062207220822092210221122122213221422152216221722182219222022212222222322242225222622272228222922302231223222332234223522362237223822392240224122422243224422452246224722482249225022512252225322542255225622572258225922602261226222632264226522662267226822692270227122722273227422752276227722782279228022812282228322842285228622872288228922902291229222932294229522962297229822992300230123022303230423052306230723082309231023112312231323142315231623172318231923202321232223232324232523262327232823292330233123322333233423352336233723382339234023412342234323442345234623472348234923502351235223532354235523562357235823592360236123622363236423652366236723682369237023712372237323742375237623772378237923802381238223832384238523862387238823892390239123922393239423952396239723982399240024012402240324042405240624072408240924102411241224132414241524162417241824192420242124222423242424252426242724282429243024312432243324342435243624372438243924402441244224432444244524462447244824492450245124522453245424552456245724582459246024612462246324642465246624672468246924702471247224732474247524762477247824792480248124822483248424852486248724882489249024912492249324942495249624972498249925002501250225032504250525062507250825092510251125122513251425152516251725182519252025212522252325242525252625272528252925302531253225332534253525362537253825392540254125422543254425452546254725482549255025512552255325542555255625572558255925602561256225632564256525662567256825692570257125722573257425752576257725782579258025812582258325842585258625872588258925902591259225932594259525962597259825992600260126022603260426052606260726082609261026112612261326142615261626172618261926202621262226232624262526262627262826292630263126322633263426352636263726382639264026412642264326442645264626472648264926502651265226532654265526562657265826592660266126622663266426652666266726682669267026712672267326742675267626772678267926802681268226832684268526862687268826892690269126922693269426952696269726982699270027012702270327042705270627072708270927102711271227132714271527162717271827192720272127222723272427252726272727282729273027312732273327342735273627372738273927402741274227432744274527462747274827492750275127522753275427552756275727582759276027612762276327642765276627672768276927702771277227732774277527762777277827792780278127822783278427852786278727882789279027912792279327942795279627972798279928002801280228032804280528062807280828092810281128122813281428152816281728182819282028212822282328242825282628272828282928302831283228332834283528362837283828392840284128422843284428452846284728482849285028512852285328542855285628572858285928602861286228632864286528662867286828692870287128722873287428752876287728782879288028812882288328842885288628872888288928902891289228932894289528962897289828992900290129022903290429052906290729082909291029112912291329142915291629172918291929202921292229232924292529262927292829292930293129322933293429352936293729382939294029412942294329442945294629472948294929502951295229532954295529562957295829592960296129622963296429652966296729682969297029712972297329742975297629772978297929802981298229832984298529862987298829892990299129922993299429952996299729982999300030013002300330043005300630073008300930103011301230133014301530163017301830193020302130223023302430253026302730283029303030313032303330343035303630373038303930403041304230433044304530463047304830493050305130523053305430553056305730583059306030613062306330643065306630673068306930703071307230733074307530763077307830793080308130823083308430853086308730883089309030913092309330943095309630973098309931003101310231033104310531063107310831093110311131123113311431153116311731183119312031213122312331243125312631273128312931303131313231333134313531363137313831393140314131423143314431453146314731483149315031513152315331543155315631573158315931603161316231633164316531663167316831693170317131723173317431753176317731783179318031813182318331843185318631873188318931903191319231933194319531963197319831993200320132023203320432053206320732083209321032113212321332143215321632173218321932203221322232233224322532263227322832293230323132323233323432353236323732383239324032413242324332443245324632473248324932503251325232533254325532563257325832593260326132623263326432653266326732683269327032713272327332743275327632773278327932803281328232833284328532863287328832893290329132923293329432953296329732983299330033013302330333043305330633073308330933103311331233133314331533163317331833193320332133223323332433253326332733283329333033313332333333343335333633373338333933403341334233433344334533463347334833493350335133523353335433553356335733583359336033613362336333643365336633673368336933703371337233733374337533763377337833793380338133823383338433853386338733883389339033913392339333943395339633973398339934003401340234033404340534063407340834093410341134123413341434153416341734183419342034213422342334243425342634273428342934303431343234333434343534363437343834393440344134423443344434453446344734483449345034513452345334543455345634573458345934603461346234633464346534663467346834693470347134723473347434753476347734783479348034813482348334843485348634873488348934903491349234933494349534963497349834993500350135023503350435053506350735083509351035113512351335143515351635173518351935203521352235233524352535263527352835293530353135323533353435353536353735383539354035413542354335443545354635473548354935503551355235533554355535563557355835593560356135623563356435653566356735683569357035713572357335743575357635773578357935803581358235833584358535863587358835893590359135923593359435953596359735983599360036013602360336043605360636073608360936103611361236133614361536163617361836193620362136223623362436253626362736283629363036313632363336343635363636373638363936403641364236433644364536463647364836493650365136523653365436553656365736583659366036613662366336643665366636673668366936703671367236733674367536763677367836793680368136823683368436853686368736883689369036913692369336943695369636973698369937003701370237033704370537063707370837093710371137123713371437153716371737183719372037213722372337243725372637273728372937303731373237333734373537363737373837393740374137423743374437453746374737483749375037513752375337543755375637573758375937603761376237633764376537663767376837693770377137723773377437753776377737783779378037813782378337843785378637873788378937903791379237933794379537963797379837993800380138023803380438053806380738083809381038113812381338143815381638173818381938203821382238233824382538263827382838293830383138323833383438353836383738383839384038413842384338443845384638473848384938503851385238533854385538563857385838593860386138623863386438653866386738683869387038713872387338743875387638773878387938803881388238833884388538863887388838893890389138923893389438953896389738983899390039013902390339043905390639073908390939103911391239133914391539163917391839193920392139223923392439253926392739283929393039313932393339343935393639373938393939403941394239433944394539463947394839493950395139523953395439553956395739583959396039613962396339643965396639673968396939703971397239733974397539763977397839793980398139823983398439853986398739883989399039913992399339943995399639973998399940004001400240034004400540064007400840094010401140124013401440154016401740184019402040214022402340244025402640274028402940304031403240334034403540364037403840394040404140424043404440454046404740484049405040514052405340544055405640574058405940604061406240634064406540664067406840694070407140724073407440754076407740784079408040814082408340844085408640874088408940904091409240934094409540964097409840994100410141024103410441054106410741084109411041114112411341144115411641174118411941204121412241234124412541264127412841294130413141324133413441354136413741384139414041414142414341444145414641474148414941504151415241534154415541564157415841594160416141624163416441654166416741684169417041714172417341744175417641774178417941804181418241834184418541864187418841894190419141924193419441954196419741984199420042014202420342044205420642074208420942104211421242134214421542164217421842194220422142224223422442254226422742284229423042314232423342344235423642374238423942404241424242434244424542464247424842494250425142524253425442554256425742584259426042614262426342644265426642674268426942704271427242734274427542764277427842794280428142824283428442854286428742884289429042914292429342944295429642974298429943004301430243034304430543064307430843094310431143124313431443154316431743184319432043214322432343244325432643274328432943304331433243334334433543364337433843394340434143424343434443454346434743484349435043514352435343544355435643574358435943604361436243634364436543664367436843694370437143724373437443754376437743784379438043814382438343844385438643874388438943904391439243934394439543964397439843994400440144024403440444054406440744084409441044114412441344144415441644174418441944204421442244234424442544264427442844294430443144324433443444354436443744384439444044414442444344444445444644474448444944504451445244534454445544564457445844594460446144624463446444654466446744684469447044714472447344744475447644774478447944804481448244834484448544864487448844894490449144924493449444954496449744984499450045014502450345044505450645074508450945104511451245134514451545164517451845194520452145224523452445254526452745284529453045314532453345344535453645374538453945404541454245434544454545464547454845494550455145524553455445554556455745584559456045614562456345644565456645674568456945704571457245734574457545764577457845794580458145824583458445854586458745884589459045914592459345944595459645974598459946004601460246034604460546064607460846094610461146124613461446154616461746184619462046214622462346244625462646274628462946304631463246334634463546364637463846394640464146424643464446454646464746484649465046514652465346544655465646574658465946604661466246634664466546664667466846694670467146724673467446754676467746784679468046814682468346844685468646874688468946904691469246934694469546964697469846994700470147024703470447054706470747084709471047114712471347144715471647174718471947204721472247234724472547264727472847294730473147324733473447354736473747384739474047414742474347444745474647474748474947504751475247534754475547564757475847594760476147624763476447654766476747684769477047714772477347744775477647774778477947804781478247834784478547864787478847894790479147924793479447954796479747984799480048014802480348044805480648074808480948104811481248134814481548164817481848194820482148224823482448254826482748284829483048314832483348344835483648374838483948404841484248434844484548464847484848494850485148524853485448554856485748584859486048614862486348644865486648674868486948704871487248734874487548764877487848794880488148824883488448854886488748884889489048914892489348944895489648974898489949004901490249034904490549064907490849094910491149124913491449154916491749184919492049214922492349244925492649274928492949304931493249334934493549364937493849394940494149424943494449454946494749484949495049514952495349544955495649574958495949604961496249634964496549664967496849694970497149724973497449754976497749784979498049814982498349844985498649874988498949904991499249934994499549964997499849995000500150025003500450055006500750085009501050115012501350145015501650175018501950205021502250235024502550265027502850295030503150325033503450355036503750385039504050415042504350445045504650475048504950505051505250535054505550565057505850595060506150625063506450655066506750685069507050715072507350745075507650775078507950805081508250835084508550865087508850895090509150925093509450955096509750985099510051015102510351045105510651075108510951105111511251135114511551165117511851195120512151225123512451255126512751285129513051315132513351345135513651375138513951405141514251435144514551465147514851495150515151525153515451555156515751585159516051615162516351645165516651675168516951705171517251735174517551765177517851795180518151825183518451855186518751885189519051915192519351945195519651975198519952005201520252035204520552065207520852095210521152125213521452155216521752185219522052215222522352245225522652275228522952305231523252335234523552365237523852395240524152425243524452455246524752485249525052515252525352545255525652575258525952605261526252635264526552665267526852695270527152725273527452755276527752785279528052815282528352845285528652875288528952905291529252935294529552965297529852995300530153025303530453055306530753085309531053115312531353145315531653175318531953205321532253235324532553265327532853295330533153325333533453355336533753385339534053415342534353445345534653475348534953505351535253535354535553565357535853595360536153625363536453655366536753685369537053715372537353745375537653775378537953805381538253835384538553865387538853895390539153925393539453955396539753985399540054015402540354045405540654075408540954105411541254135414541554165417541854195420542154225423542454255426542754285429543054315432543354345435543654375438543954405441544254435444544554465447544854495450545154525453545454555456545754585459546054615462546354645465546654675468546954705471547254735474547554765477547854795480548154825483548454855486548754885489549054915492549354945495549654975498549955005501550255035504550555065507550855095510551155125513551455155516551755185519552055215522552355245525552655275528552955305531553255335534553555365537553855395540554155425543554455455546554755485549555055515552555355545555555655575558555955605561556255635564556555665567556855695570557155725573557455755576557755785579558055815582558355845585558655875588558955905591559255935594559555965597559855995600560156025603560456055606560756085609561056115612561356145615561656175618561956205621562256235624562556265627562856295630563156325633563456355636563756385639564056415642564356445645564656475648564956505651565256535654565556565657565856595660566156625663566456655666566756685669567056715672567356745675567656775678567956805681568256835684568556865687568856895690569156925693569456955696569756985699570057015702570357045705570657075708570957105711571257135714571557165717571857195720572157225723572457255726572757285729573057315732573357345735573657375738573957405741574257435744574557465747574857495750575157525753575457555756575757585759576057615762576357645765576657675768576957705771577257735774577557765777577857795780578157825783578457855786578757885789579057915792579357945795579657975798579958005801580258035804580558065807580858095810581158125813581458155816581758185819582058215822582358245825582658275828582958305831583258335834583558365837583858395840584158425843584458455846584758485849585058515852585358545855585658575858585958605861586258635864586558665867586858695870587158725873587458755876587758785879588058815882588358845885588658875888588958905891589258935894589558965897589858995900590159025903590459055906590759085909591059115912591359145915591659175918591959205921592259235924592559265927592859295930593159325933593459355936593759385939594059415942594359445945594659475948594959505951595259535954595559565957595859595960596159625963596459655966596759685969597059715972597359745975597659775978597959805981598259835984598559865987598859895990599159925993599459955996599759985999600060016002600360046005600660076008600960106011601260136014601560166017601860196020602160226023602460256026602760286029603060316032603360346035603660376038603960406041604260436044604560466047604860496050605160526053605460556056605760586059606060616062606360646065606660676068606960706071607260736074607560766077607860796080608160826083608460856086608760886089609060916092609360946095609660976098609961006101610261036104610561066107610861096110611161126113611461156116611761186119612061216122612361246125612661276128612961306131613261336134613561366137613861396140614161426143614461456146614761486149615061516152615361546155615661576158615961606161616261636164616561666167616861696170617161726173617461756176617761786179618061816182618361846185618661876188618961906191619261936194619561966197619861996200620162026203620462056206620762086209621062116212621362146215621662176218621962206221622262236224622562266227622862296230623162326233623462356236623762386239624062416242624362446245624662476248624962506251625262536254625562566257625862596260626162626263626462656266626762686269627062716272627362746275627662776278627962806281628262836284628562866287628862896290629162926293629462956296629762986299630063016302630363046305630663076308630963106311631263136314631563166317631863196320632163226323632463256326632763286329633063316332633363346335633663376338633963406341634263436344634563466347634863496350635163526353635463556356635763586359636063616362636363646365636663676368636963706371637263736374637563766377637863796380638163826383638463856386638763886389639063916392639363946395639663976398639964006401640264036404640564066407640864096410641164126413641464156416641764186419642064216422642364246425642664276428642964306431643264336434643564366437643864396440644164426443644464456446644764486449645064516452645364546455645664576458645964606461646264636464646564666467646864696470647164726473647464756476647764786479648064816482648364846485648664876488648964906491649264936494649564966497649864996500650165026503650465056506650765086509651065116512651365146515651665176518651965206521652265236524652565266527652865296530653165326533653465356536653765386539654065416542654365446545654665476548654965506551655265536554655565566557655865596560656165626563656465656566656765686569657065716572657365746575657665776578657965806581658265836584658565866587658865896590659165926593659465956596659765986599660066016602660366046605660666076608660966106611661266136614661566166617661866196620662166226623662466256626662766286629663066316632663366346635663666376638663966406641664266436644664566466647664866496650665166526653665466556656665766586659666066616662666366646665666666676668666966706671667266736674667566766677667866796680668166826683668466856686668766886689669066916692669366946695669666976698669967006701670267036704670567066707670867096710671167126713671467156716671767186719672067216722672367246725672667276728672967306731673267336734673567366737673867396740674167426743674467456746674767486749675067516752675367546755675667576758675967606761676267636764676567666767676867696770677167726773677467756776677767786779678067816782678367846785678667876788678967906791679267936794679567966797679867996800680168026803680468056806680768086809681068116812681368146815681668176818681968206821682268236824682568266827682868296830683168326833683468356836683768386839684068416842684368446845684668476848684968506851685268536854685568566857685868596860686168626863686468656866686768686869687068716872687368746875687668776878687968806881688268836884688568866887688868896890689168926893689468956896689768986899690069016902690369046905690669076908690969106911691269136914691569166917691869196920692169226923692469256926692769286929693069316932693369346935693669376938693969406941694269436944694569466947694869496950695169526953695469556956695769586959696069616962696369646965696669676968696969706971697269736974697569766977697869796980698169826983698469856986698769886989699069916992699369946995699669976998699970007001700270037004700570067007700870097010701170127013701470157016701770187019702070217022702370247025702670277028702970307031703270337034703570367037703870397040704170427043704470457046704770487049705070517052705370547055705670577058705970607061706270637064706570667067706870697070707170727073707470757076707770787079708070817082708370847085708670877088708970907091709270937094709570967097709870997100710171027103710471057106710771087109711071117112711371147115711671177118711971207121712271237124712571267127712871297130713171327133713471357136713771387139714071417142714371447145714671477148714971507151715271537154715571567157715871597160716171627163716471657166716771687169717071717172717371747175717671777178717971807181718271837184718571867187718871897190719171927193719471957196719771987199720072017202720372047205720672077208720972107211721272137214721572167217721872197220722172227223722472257226722772287229723072317232723372347235723672377238723972407241724272437244724572467247724872497250725172527253725472557256725772587259726072617262726372647265726672677268726972707271727272737274727572767277727872797280728172827283728472857286728772887289729072917292729372947295729672977298729973007301730273037304730573067307730873097310731173127313731473157316731773187319732073217322732373247325732673277328732973307331733273337334733573367337733873397340734173427343734473457346734773487349735073517352735373547355735673577358735973607361736273637364736573667367736873697370737173727373737473757376737773787379738073817382738373847385738673877388738973907391739273937394739573967397739873997400740174027403740474057406740774087409741074117412741374147415741674177418741974207421742274237424742574267427742874297430743174327433743474357436743774387439744074417442744374447445744674477448744974507451745274537454745574567457745874597460746174627463746474657466746774687469747074717472747374747475747674777478747974807481748274837484748574867487748874897490749174927493749474957496749774987499750075017502750375047505750675077508750975107511751275137514751575167517751875197520752175227523752475257526752775287529753075317532753375347535753675377538753975407541754275437544754575467547754875497550755175527553755475557556755775587559756075617562756375647565756675677568756975707571757275737574757575767577757875797580758175827583758475857586758775887589759075917592759375947595759675977598759976007601760276037604760576067607760876097610761176127613761476157616761776187619762076217622762376247625762676277628762976307631763276337634763576367637763876397640764176427643764476457646764776487649765076517652765376547655765676577658765976607661766276637664766576667667766876697670767176727673767476757676767776787679768076817682768376847685768676877688768976907691769276937694769576967697769876997700770177027703770477057706770777087709771077117712771377147715771677177718771977207721772277237724772577267727772877297730773177327733773477357736773777387739774077417742774377447745774677477748774977507751775277537754775577567757775877597760776177627763776477657766776777687769777077717772777377747775777677777778777977807781778277837784778577867787778877897790779177927793779477957796779777987799780078017802780378047805780678077808780978107811781278137814781578167817781878197820782178227823782478257826782778287829783078317832783378347835783678377838783978407841784278437844784578467847784878497850785178527853785478557856785778587859786078617862786378647865786678677868786978707871787278737874787578767877787878797880788178827883788478857886788778887889789078917892789378947895789678977898789979007901790279037904790579067907790879097910791179127913791479157916791779187919792079217922792379247925792679277928792979307931793279337934793579367937793879397940794179427943794479457946794779487949795079517952795379547955795679577958795979607961796279637964796579667967796879697970797179727973797479757976797779787979798079817982798379847985798679877988798979907991799279937994799579967997799879998000800180028003800480058006800780088009801080118012801380148015801680178018801980208021802280238024802580268027802880298030803180328033803480358036803780388039804080418042804380448045804680478048804980508051805280538054805580568057805880598060806180628063806480658066806780688069807080718072807380748075807680778078807980808081808280838084808580868087808880898090809180928093809480958096809780988099810081018102810381048105810681078108810981108111811281138114811581168117811881198120812181228123812481258126812781288129813081318132813381348135813681378138813981408141814281438144814581468147814881498150815181528153815481558156815781588159816081618162816381648165816681678168816981708171817281738174817581768177817881798180818181828183818481858186818781888189819081918192819381948195819681978198819982008201820282038204820582068207820882098210821182128213821482158216821782188219822082218222822382248225822682278228822982308231823282338234823582368237823882398240824182428243824482458246824782488249825082518252825382548255825682578258825982608261826282638264826582668267826882698270827182728273827482758276827782788279828082818282828382848285828682878288828982908291829282938294829582968297829882998300830183028303830483058306830783088309831083118312831383148315831683178318831983208321832283238324832583268327832883298330833183328333833483358336833783388339834083418342834383448345834683478348834983508351835283538354835583568357835883598360836183628363836483658366836783688369837083718372837383748375837683778378837983808381838283838384838583868387838883898390839183928393839483958396839783988399840084018402840384048405840684078408840984108411841284138414841584168417841884198420842184228423842484258426842784288429843084318432843384348435843684378438843984408441844284438444844584468447844884498450845184528453845484558456845784588459846084618462846384648465846684678468846984708471847284738474847584768477847884798480848184828483848484858486848784888489849084918492849384948495849684978498849985008501850285038504850585068507850885098510851185128513851485158516851785188519852085218522852385248525852685278528852985308531853285338534853585368537853885398540854185428543854485458546854785488549855085518552855385548555855685578558855985608561856285638564856585668567856885698570857185728573857485758576857785788579858085818582858385848585858685878588858985908591859285938594859585968597859885998600860186028603860486058606860786088609861086118612861386148615861686178618861986208621862286238624862586268627862886298630863186328633863486358636863786388639864086418642864386448645864686478648864986508651865286538654865586568657865886598660866186628663866486658666866786688669867086718672867386748675867686778678867986808681868286838684868586868687868886898690869186928693869486958696869786988699870087018702870387048705870687078708870987108711871287138714871587168717871887198720872187228723872487258726872787288729873087318732873387348735873687378738873987408741874287438744874587468747874887498750875187528753875487558756875787588759876087618762876387648765876687678768876987708771877287738774877587768777877887798780878187828783878487858786878787888789879087918792879387948795879687978798879988008801880288038804880588068807880888098810881188128813881488158816881788188819882088218822882388248825882688278828882988308831883288338834883588368837883888398840884188428843884488458846884788488849885088518852885388548855885688578858885988608861886288638864886588668867886888698870887188728873887488758876887788788879888088818882888388848885888688878888888988908891889288938894889588968897889888998900890189028903890489058906890789088909891089118912891389148915891689178918891989208921892289238924892589268927892889298930893189328933893489358936893789388939894089418942894389448945894689478948894989508951895289538954895589568957895889598960896189628963896489658966896789688969897089718972897389748975897689778978897989808981898289838984898589868987898889898990899189928993899489958996899789988999900090019002900390049005900690079008900990109011901290139014901590169017901890199020902190229023902490259026902790289029903090319032903390349035903690379038903990409041904290439044904590469047904890499050905190529053905490559056905790589059906090619062906390649065906690679068906990709071907290739074907590769077907890799080908190829083908490859086908790889089909090919092909390949095909690979098909991009101910291039104910591069107910891099110911191129113911491159116911791189119912091219122912391249125912691279128912991309131913291339134913591369137913891399140914191429143914491459146914791489149915091519152915391549155915691579158915991609161916291639164916591669167916891699170917191729173917491759176917791789179918091819182918391849185918691879188918991909191919291939194919591969197919891999200920192029203920492059206920792089209921092119212921392149215921692179218921992209221922292239224922592269227922892299230923192329233923492359236923792389239924092419242924392449245924692479248924992509251925292539254925592569257925892599260926192629263926492659266926792689269927092719272927392749275927692779278927992809281928292839284928592869287928892899290929192929293929492959296929792989299930093019302930393049305930693079308930993109311931293139314931593169317931893199320932193229323932493259326932793289329933093319332933393349335933693379338933993409341934293439344934593469347934893499350935193529353935493559356935793589359936093619362936393649365936693679368936993709371937293739374937593769377937893799380938193829383938493859386938793889389939093919392939393949395939693979398939994009401940294039404940594069407940894099410941194129413941494159416941794189419942094219422942394249425942694279428942994309431943294339434943594369437943894399440944194429443944494459446944794489449945094519452945394549455945694579458945994609461946294639464946594669467946894699470947194729473947494759476947794789479948094819482948394849485948694879488948994909491949294939494949594969497949894999500950195029503950495059506950795089509951095119512951395149515951695179518951995209521952295239524952595269527952895299530953195329533953495359536953795389539954095419542954395449545954695479548954995509551955295539554955595569557955895599560956195629563956495659566956795689569957095719572957395749575957695779578957995809581958295839584958595869587958895899590959195929593959495959596959795989599960096019602960396049605960696079608960996109611961296139614961596169617961896199620962196229623962496259626962796289629963096319632963396349635963696379638963996409641964296439644964596469647964896499650965196529653
  1. /* -*- c++ -*- */
  2. /**
  3. * @file
  4. */
  5. /**
  6. * @mainpage Reprap 3D printer firmware based on Sprinter and grbl.
  7. *
  8. * @section intro_sec Introduction
  9. *
  10. * This firmware is a mashup between Sprinter and grbl.
  11. * https://github.com/kliment/Sprinter
  12. * https://github.com/simen/grbl/tree
  13. *
  14. * It has preliminary support for Matthew Roberts advance algorithm
  15. * http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
  16. *
  17. * Prusa Research s.r.o. https://www.prusa3d.cz
  18. *
  19. * @section copyright_sec Copyright
  20. *
  21. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  22. *
  23. * This program is free software: you can redistribute it and/or modify
  24. * it under the terms of the GNU General Public License as published by
  25. * the Free Software Foundation, either version 3 of the License, or
  26. * (at your option) any later version.
  27. *
  28. * This program is distributed in the hope that it will be useful,
  29. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  30. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  31. * GNU General Public License for more details.
  32. *
  33. * You should have received a copy of the GNU General Public License
  34. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  35. *
  36. * @section notes_sec Notes
  37. *
  38. * * Do not create static objects in global functions.
  39. * Otherwise constructor guard against concurrent calls is generated costing
  40. * about 8B RAM and 14B flash.
  41. *
  42. *
  43. */
  44. #include "Marlin.h"
  45. #ifdef ENABLE_AUTO_BED_LEVELING
  46. #include "vector_3.h"
  47. #ifdef AUTO_BED_LEVELING_GRID
  48. #include "qr_solve.h"
  49. #endif
  50. #endif // ENABLE_AUTO_BED_LEVELING
  51. #ifdef MESH_BED_LEVELING
  52. #include "mesh_bed_leveling.h"
  53. #include "mesh_bed_calibration.h"
  54. #endif
  55. #include "printers.h"
  56. #include "menu.h"
  57. #include "ultralcd.h"
  58. #include "planner.h"
  59. #include "stepper.h"
  60. #include "temperature.h"
  61. #include "motion_control.h"
  62. #include "cardreader.h"
  63. #include "ConfigurationStore.h"
  64. #include "language.h"
  65. #include "pins_arduino.h"
  66. #include "math.h"
  67. #include "util.h"
  68. #include "Timer.h"
  69. #include <avr/wdt.h>
  70. #include <avr/pgmspace.h>
  71. #include "Dcodes.h"
  72. #include "AutoDeplete.h"
  73. #ifdef SWSPI
  74. #include "swspi.h"
  75. #endif //SWSPI
  76. #include "spi.h"
  77. #ifdef SWI2C
  78. #include "swi2c.h"
  79. #endif //SWI2C
  80. #ifdef FILAMENT_SENSOR
  81. #include "fsensor.h"
  82. #endif //FILAMENT_SENSOR
  83. #ifdef TMC2130
  84. #include "tmc2130.h"
  85. #endif //TMC2130
  86. #ifdef W25X20CL
  87. #include "w25x20cl.h"
  88. #include "optiboot_w25x20cl.h"
  89. #endif //W25X20CL
  90. #ifdef BLINKM
  91. #include "BlinkM.h"
  92. #include "Wire.h"
  93. #endif
  94. #ifdef ULTRALCD
  95. #include "ultralcd.h"
  96. #endif
  97. #if NUM_SERVOS > 0
  98. #include "Servo.h"
  99. #endif
  100. #if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
  101. #include <SPI.h>
  102. #endif
  103. #include "mmu.h"
  104. #define VERSION_STRING "1.0.2"
  105. #include "ultralcd.h"
  106. #include "sound.h"
  107. #include "cmdqueue.h"
  108. #include "io_atmega2560.h"
  109. // Macros for bit masks
  110. #define BIT(b) (1<<(b))
  111. #define TEST(n,b) (((n)&BIT(b))!=0)
  112. #define SET_BIT(n,b,value) (n) ^= ((-value)^(n)) & (BIT(b))
  113. //Macro for print fan speed
  114. #define FAN_PULSE_WIDTH_LIMIT ((fanSpeed > 100) ? 3 : 4) //time in ms
  115. #define PRINTING_TYPE_SD 0
  116. #define PRINTING_TYPE_USB 1
  117. #define PRINTING_TYPE_NONE 2
  118. //filament types
  119. #define FILAMENT_DEFAULT 0
  120. #define FILAMENT_FLEX 1
  121. #define FILAMENT_PVA 2
  122. #define FILAMENT_UNDEFINED 255
  123. //Stepper Movement Variables
  124. //===========================================================================
  125. //=============================imported variables============================
  126. //===========================================================================
  127. //===========================================================================
  128. //=============================public variables=============================
  129. //===========================================================================
  130. #ifdef SDSUPPORT
  131. CardReader card;
  132. #endif
  133. unsigned long PingTime = _millis();
  134. unsigned long NcTime;
  135. uint8_t mbl_z_probe_nr = 3; //numer of Z measurements for each point in mesh bed leveling calibration
  136. //used for PINDA temp calibration and pause print
  137. #define DEFAULT_RETRACTION 1
  138. #define DEFAULT_RETRACTION_MM 4 //MM
  139. float default_retraction = DEFAULT_RETRACTION;
  140. float homing_feedrate[] = HOMING_FEEDRATE;
  141. // Currently only the extruder axis may be switched to a relative mode.
  142. // Other axes are always absolute or relative based on the common relative_mode flag.
  143. bool axis_relative_modes[] = AXIS_RELATIVE_MODES;
  144. int feedmultiply=100; //100->1 200->2
  145. int extrudemultiply=100; //100->1 200->2
  146. int extruder_multiply[EXTRUDERS] = {100
  147. #if EXTRUDERS > 1
  148. , 100
  149. #if EXTRUDERS > 2
  150. , 100
  151. #endif
  152. #endif
  153. };
  154. int bowden_length[4] = {385, 385, 385, 385};
  155. bool is_usb_printing = false;
  156. bool homing_flag = false;
  157. bool temp_cal_active = false;
  158. unsigned long kicktime = _millis()+100000;
  159. unsigned int usb_printing_counter;
  160. int8_t lcd_change_fil_state = 0;
  161. unsigned long pause_time = 0;
  162. unsigned long start_pause_print = _millis();
  163. unsigned long t_fan_rising_edge = _millis();
  164. LongTimer safetyTimer;
  165. static LongTimer crashDetTimer;
  166. //unsigned long load_filament_time;
  167. bool mesh_bed_leveling_flag = false;
  168. bool mesh_bed_run_from_menu = false;
  169. int8_t FarmMode = 0;
  170. bool prusa_sd_card_upload = false;
  171. unsigned int status_number = 0;
  172. unsigned long total_filament_used;
  173. unsigned int heating_status;
  174. unsigned int heating_status_counter;
  175. bool loading_flag = false;
  176. char snmm_filaments_used = 0;
  177. bool fan_state[2];
  178. int fan_edge_counter[2];
  179. int fan_speed[2];
  180. char dir_names[3][9];
  181. bool sortAlpha = false;
  182. float extruder_multiplier[EXTRUDERS] = {1.0
  183. #if EXTRUDERS > 1
  184. , 1.0
  185. #if EXTRUDERS > 2
  186. , 1.0
  187. #endif
  188. #endif
  189. };
  190. float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0 };
  191. //shortcuts for more readable code
  192. #define _x current_position[X_AXIS]
  193. #define _y current_position[Y_AXIS]
  194. #define _z current_position[Z_AXIS]
  195. #define _e current_position[E_AXIS]
  196. float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS };
  197. float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };
  198. bool axis_known_position[3] = {false, false, false};
  199. // Extruder offset
  200. #if EXTRUDERS > 1
  201. #define NUM_EXTRUDER_OFFSETS 2 // only in XY plane
  202. float extruder_offset[NUM_EXTRUDER_OFFSETS][EXTRUDERS] = {
  203. #if defined(EXTRUDER_OFFSET_X) && defined(EXTRUDER_OFFSET_Y)
  204. EXTRUDER_OFFSET_X, EXTRUDER_OFFSET_Y
  205. #endif
  206. };
  207. #endif
  208. uint8_t active_extruder = 0;
  209. int fanSpeed=0;
  210. #ifdef FWRETRACT
  211. bool retracted[EXTRUDERS]={false
  212. #if EXTRUDERS > 1
  213. , false
  214. #if EXTRUDERS > 2
  215. , false
  216. #endif
  217. #endif
  218. };
  219. bool retracted_swap[EXTRUDERS]={false
  220. #if EXTRUDERS > 1
  221. , false
  222. #if EXTRUDERS > 2
  223. , false
  224. #endif
  225. #endif
  226. };
  227. float retract_length_swap = RETRACT_LENGTH_SWAP;
  228. float retract_recover_length_swap = RETRACT_RECOVER_LENGTH_SWAP;
  229. #endif
  230. #ifdef PS_DEFAULT_OFF
  231. bool powersupply = false;
  232. #else
  233. bool powersupply = true;
  234. #endif
  235. bool cancel_heatup = false ;
  236. int8_t busy_state = NOT_BUSY;
  237. static long prev_busy_signal_ms = -1;
  238. uint8_t host_keepalive_interval = HOST_KEEPALIVE_INTERVAL;
  239. const char errormagic[] PROGMEM = "Error:";
  240. const char echomagic[] PROGMEM = "echo:";
  241. bool no_response = false;
  242. uint8_t important_status;
  243. uint8_t saved_filament_type;
  244. // save/restore printing in case that mmu was not responding
  245. bool mmu_print_saved = false;
  246. // storing estimated time to end of print counted by slicer
  247. uint8_t print_percent_done_normal = PRINT_PERCENT_DONE_INIT;
  248. uint16_t print_time_remaining_normal = PRINT_TIME_REMAINING_INIT; //estimated remaining print time in minutes
  249. uint8_t print_percent_done_silent = PRINT_PERCENT_DONE_INIT;
  250. uint16_t print_time_remaining_silent = PRINT_TIME_REMAINING_INIT; //estimated remaining print time in minutes
  251. bool wizard_active = false; //autoload temporarily disabled during wizard
  252. //===========================================================================
  253. //=============================Private Variables=============================
  254. //===========================================================================
  255. #define MSG_BED_LEVELING_FAILED_TIMEOUT 30
  256. const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'};
  257. float destination[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0};
  258. // For tracing an arc
  259. static float offset[3] = {0.0, 0.0, 0.0};
  260. static float feedrate = 1500.0, next_feedrate, saved_feedrate;
  261. // Determines Absolute or Relative Coordinates.
  262. // Also there is bool axis_relative_modes[] per axis flag.
  263. static bool relative_mode = false;
  264. const int sensitive_pins[] = SENSITIVE_PINS; // Sensitive pin list for M42
  265. //static float tt = 0;
  266. //static float bt = 0;
  267. //Inactivity shutdown variables
  268. static unsigned long previous_millis_cmd = 0;
  269. unsigned long max_inactive_time = 0;
  270. static unsigned long stepper_inactive_time = DEFAULT_STEPPER_DEACTIVE_TIME*1000l;
  271. static unsigned long safetytimer_inactive_time = DEFAULT_SAFETYTIMER_TIME_MINS*60*1000ul;
  272. unsigned long starttime=0;
  273. unsigned long stoptime=0;
  274. unsigned long _usb_timer = 0;
  275. bool extruder_under_pressure = true;
  276. bool Stopped=false;
  277. #if NUM_SERVOS > 0
  278. Servo servos[NUM_SERVOS];
  279. #endif
  280. bool CooldownNoWait = true;
  281. bool target_direction;
  282. //Insert variables if CHDK is defined
  283. #ifdef CHDK
  284. unsigned long chdkHigh = 0;
  285. boolean chdkActive = false;
  286. #endif
  287. //! @name RAM save/restore printing
  288. //! @{
  289. bool saved_printing = false; //!< Print is paused and saved in RAM
  290. static uint32_t saved_sdpos = 0; //!< SD card position, or line number in case of USB printing
  291. static uint8_t saved_printing_type = PRINTING_TYPE_SD;
  292. static float saved_pos[4] = { 0, 0, 0, 0 };
  293. //! Feedrate hopefully derived from an active block of the planner at the time the print has been canceled, in mm/min.
  294. static float saved_feedrate2 = 0;
  295. static uint8_t saved_active_extruder = 0;
  296. static float saved_extruder_temperature = 0.0; //!< Active extruder temperature
  297. static bool saved_extruder_under_pressure = false;
  298. static bool saved_extruder_relative_mode = false;
  299. static int saved_fanSpeed = 0; //!< Print fan speed
  300. //! @}
  301. static int saved_feedmultiply_mm = 100;
  302. //===========================================================================
  303. //=============================Routines======================================
  304. //===========================================================================
  305. static void get_arc_coordinates();
  306. static bool setTargetedHotend(int code, uint8_t &extruder);
  307. static void print_time_remaining_init();
  308. static void wait_for_heater(long codenum, uint8_t extruder);
  309. static void gcode_G28(bool home_x_axis, bool home_y_axis, bool home_z_axis);
  310. uint16_t gcode_in_progress = 0;
  311. uint16_t mcode_in_progress = 0;
  312. void serial_echopair_P(const char *s_P, float v)
  313. { serialprintPGM(s_P); SERIAL_ECHO(v); }
  314. void serial_echopair_P(const char *s_P, double v)
  315. { serialprintPGM(s_P); SERIAL_ECHO(v); }
  316. void serial_echopair_P(const char *s_P, unsigned long v)
  317. { serialprintPGM(s_P); SERIAL_ECHO(v); }
  318. #ifdef SDSUPPORT
  319. #include "SdFatUtil.h"
  320. int freeMemory() { return SdFatUtil::FreeRam(); }
  321. #else
  322. extern "C" {
  323. extern unsigned int __bss_end;
  324. extern unsigned int __heap_start;
  325. extern void *__brkval;
  326. int freeMemory() {
  327. int free_memory;
  328. if ((int)__brkval == 0)
  329. free_memory = ((int)&free_memory) - ((int)&__bss_end);
  330. else
  331. free_memory = ((int)&free_memory) - ((int)__brkval);
  332. return free_memory;
  333. }
  334. }
  335. #endif //!SDSUPPORT
  336. void setup_killpin()
  337. {
  338. #if defined(KILL_PIN) && KILL_PIN > -1
  339. SET_INPUT(KILL_PIN);
  340. WRITE(KILL_PIN,HIGH);
  341. #endif
  342. }
  343. // Set home pin
  344. void setup_homepin(void)
  345. {
  346. #if defined(HOME_PIN) && HOME_PIN > -1
  347. SET_INPUT(HOME_PIN);
  348. WRITE(HOME_PIN,HIGH);
  349. #endif
  350. }
  351. void setup_photpin()
  352. {
  353. #if defined(PHOTOGRAPH_PIN) && PHOTOGRAPH_PIN > -1
  354. SET_OUTPUT(PHOTOGRAPH_PIN);
  355. WRITE(PHOTOGRAPH_PIN, LOW);
  356. #endif
  357. }
  358. void setup_powerhold()
  359. {
  360. #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1
  361. SET_OUTPUT(SUICIDE_PIN);
  362. WRITE(SUICIDE_PIN, HIGH);
  363. #endif
  364. #if defined(PS_ON_PIN) && PS_ON_PIN > -1
  365. SET_OUTPUT(PS_ON_PIN);
  366. #if defined(PS_DEFAULT_OFF)
  367. WRITE(PS_ON_PIN, PS_ON_ASLEEP);
  368. #else
  369. WRITE(PS_ON_PIN, PS_ON_AWAKE);
  370. #endif
  371. #endif
  372. }
  373. void suicide()
  374. {
  375. #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1
  376. SET_OUTPUT(SUICIDE_PIN);
  377. WRITE(SUICIDE_PIN, LOW);
  378. #endif
  379. }
  380. void servo_init()
  381. {
  382. #if (NUM_SERVOS >= 1) && defined(SERVO0_PIN) && (SERVO0_PIN > -1)
  383. servos[0].attach(SERVO0_PIN);
  384. #endif
  385. #if (NUM_SERVOS >= 2) && defined(SERVO1_PIN) && (SERVO1_PIN > -1)
  386. servos[1].attach(SERVO1_PIN);
  387. #endif
  388. #if (NUM_SERVOS >= 3) && defined(SERVO2_PIN) && (SERVO2_PIN > -1)
  389. servos[2].attach(SERVO2_PIN);
  390. #endif
  391. #if (NUM_SERVOS >= 4) && defined(SERVO3_PIN) && (SERVO3_PIN > -1)
  392. servos[3].attach(SERVO3_PIN);
  393. #endif
  394. #if (NUM_SERVOS >= 5)
  395. #error "TODO: enter initalisation code for more servos"
  396. #endif
  397. }
  398. bool fans_check_enabled = true;
  399. #ifdef TMC2130
  400. extern int8_t CrashDetectMenu;
  401. void crashdet_enable()
  402. {
  403. tmc2130_sg_stop_on_crash = true;
  404. eeprom_update_byte((uint8_t*)EEPROM_CRASH_DET, 0xFF);
  405. CrashDetectMenu = 1;
  406. }
  407. void crashdet_disable()
  408. {
  409. tmc2130_sg_stop_on_crash = false;
  410. tmc2130_sg_crash = 0;
  411. eeprom_update_byte((uint8_t*)EEPROM_CRASH_DET, 0x00);
  412. CrashDetectMenu = 0;
  413. }
  414. void crashdet_stop_and_save_print()
  415. {
  416. stop_and_save_print_to_ram(10, -default_retraction); //XY - no change, Z 10mm up, E -1mm retract
  417. }
  418. void crashdet_restore_print_and_continue()
  419. {
  420. restore_print_from_ram_and_continue(default_retraction); //XYZ = orig, E +1mm unretract
  421. // babystep_apply();
  422. }
  423. void crashdet_stop_and_save_print2()
  424. {
  425. cli();
  426. planner_abort_hard(); //abort printing
  427. cmdqueue_reset(); //empty cmdqueue
  428. card.sdprinting = false;
  429. card.closefile();
  430. // Reset and re-enable the stepper timer just before the global interrupts are enabled.
  431. st_reset_timer();
  432. sei();
  433. }
  434. void crashdet_detected(uint8_t mask)
  435. {
  436. st_synchronize();
  437. static uint8_t crashDet_counter = 0;
  438. bool automatic_recovery_after_crash = true;
  439. if (crashDet_counter++ == 0) {
  440. crashDetTimer.start();
  441. }
  442. else if (crashDetTimer.expired(CRASHDET_TIMER * 1000ul)){
  443. crashDetTimer.stop();
  444. crashDet_counter = 0;
  445. }
  446. else if(crashDet_counter == CRASHDET_COUNTER_MAX){
  447. automatic_recovery_after_crash = false;
  448. crashDetTimer.stop();
  449. crashDet_counter = 0;
  450. }
  451. else {
  452. crashDetTimer.start();
  453. }
  454. lcd_update_enable(true);
  455. lcd_clear();
  456. lcd_update(2);
  457. if (mask & X_AXIS_MASK)
  458. {
  459. eeprom_update_byte((uint8_t*)EEPROM_CRASH_COUNT_X, eeprom_read_byte((uint8_t*)EEPROM_CRASH_COUNT_X) + 1);
  460. eeprom_update_word((uint16_t*)EEPROM_CRASH_COUNT_X_TOT, eeprom_read_word((uint16_t*)EEPROM_CRASH_COUNT_X_TOT) + 1);
  461. }
  462. if (mask & Y_AXIS_MASK)
  463. {
  464. eeprom_update_byte((uint8_t*)EEPROM_CRASH_COUNT_Y, eeprom_read_byte((uint8_t*)EEPROM_CRASH_COUNT_Y) + 1);
  465. eeprom_update_word((uint16_t*)EEPROM_CRASH_COUNT_Y_TOT, eeprom_read_word((uint16_t*)EEPROM_CRASH_COUNT_Y_TOT) + 1);
  466. }
  467. lcd_update_enable(true);
  468. lcd_update(2);
  469. lcd_setstatuspgm(_T(MSG_CRASH_DETECTED));
  470. gcode_G28(true, true, false); //home X and Y
  471. st_synchronize();
  472. if (automatic_recovery_after_crash) {
  473. enquecommand_P(PSTR("CRASH_RECOVER"));
  474. }else{
  475. setTargetHotend(0, active_extruder);
  476. bool yesno = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Crash detected. Resume print?"), false);
  477. lcd_update_enable(true);
  478. if (yesno)
  479. {
  480. enquecommand_P(PSTR("CRASH_RECOVER"));
  481. }
  482. else
  483. {
  484. enquecommand_P(PSTR("CRASH_CANCEL"));
  485. }
  486. }
  487. }
  488. void crashdet_recover()
  489. {
  490. crashdet_restore_print_and_continue();
  491. tmc2130_sg_stop_on_crash = true;
  492. }
  493. void crashdet_cancel()
  494. {
  495. saved_printing = false;
  496. tmc2130_sg_stop_on_crash = true;
  497. if (saved_printing_type == PRINTING_TYPE_SD) {
  498. lcd_print_stop();
  499. }else if(saved_printing_type == PRINTING_TYPE_USB){
  500. SERIAL_ECHOLNPGM("// action:cancel"); //for Octoprint: works the same as clicking "Abort" button in Octoprint GUI
  501. SERIAL_PROTOCOLLNRPGM(MSG_OK);
  502. }
  503. }
  504. #endif //TMC2130
  505. void failstats_reset_print()
  506. {
  507. eeprom_update_byte((uint8_t *)EEPROM_CRASH_COUNT_X, 0);
  508. eeprom_update_byte((uint8_t *)EEPROM_CRASH_COUNT_Y, 0);
  509. eeprom_update_byte((uint8_t *)EEPROM_FERROR_COUNT, 0);
  510. eeprom_update_byte((uint8_t *)EEPROM_POWER_COUNT, 0);
  511. eeprom_update_byte((uint8_t *)EEPROM_MMU_FAIL, 0);
  512. eeprom_update_byte((uint8_t *)EEPROM_MMU_LOAD_FAIL, 0);
  513. }
  514. #ifdef MESH_BED_LEVELING
  515. enum MeshLevelingState { MeshReport, MeshStart, MeshNext, MeshSet };
  516. #endif
  517. // Factory reset function
  518. // This function is used to erase parts or whole EEPROM memory which is used for storing calibration and and so on.
  519. // Level input parameter sets depth of reset
  520. int er_progress = 0;
  521. static void factory_reset(char level)
  522. {
  523. lcd_clear();
  524. switch (level) {
  525. // Level 0: Language reset
  526. case 0:
  527. if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
  528. WRITE(BEEPER, HIGH);
  529. _delay_ms(100);
  530. WRITE(BEEPER, LOW);
  531. lang_reset();
  532. break;
  533. //Level 1: Reset statistics
  534. case 1:
  535. if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
  536. WRITE(BEEPER, HIGH);
  537. _delay_ms(100);
  538. WRITE(BEEPER, LOW);
  539. eeprom_update_dword((uint32_t *)EEPROM_TOTALTIME, 0);
  540. eeprom_update_dword((uint32_t *)EEPROM_FILAMENTUSED, 0);
  541. eeprom_update_byte((uint8_t *)EEPROM_CRASH_COUNT_X, 0);
  542. eeprom_update_byte((uint8_t *)EEPROM_CRASH_COUNT_Y, 0);
  543. eeprom_update_byte((uint8_t *)EEPROM_FERROR_COUNT, 0);
  544. eeprom_update_byte((uint8_t *)EEPROM_POWER_COUNT, 0);
  545. eeprom_update_word((uint16_t *)EEPROM_CRASH_COUNT_X_TOT, 0);
  546. eeprom_update_word((uint16_t *)EEPROM_CRASH_COUNT_Y_TOT, 0);
  547. eeprom_update_word((uint16_t *)EEPROM_FERROR_COUNT_TOT, 0);
  548. eeprom_update_word((uint16_t *)EEPROM_POWER_COUNT_TOT, 0);
  549. eeprom_update_word((uint16_t *)EEPROM_MMU_FAIL_TOT, 0);
  550. eeprom_update_word((uint16_t *)EEPROM_MMU_LOAD_FAIL_TOT, 0);
  551. eeprom_update_byte((uint8_t *)EEPROM_MMU_FAIL, 0);
  552. eeprom_update_byte((uint8_t *)EEPROM_MMU_LOAD_FAIL, 0);
  553. lcd_menu_statistics();
  554. break;
  555. // Level 2: Prepare for shipping
  556. case 2:
  557. //lcd_puts_P(PSTR("Factory RESET"));
  558. //lcd_puts_at_P(1,2,PSTR("Shipping prep"));
  559. // Force language selection at the next boot up.
  560. lang_reset();
  561. // Force the "Follow calibration flow" message at the next boot up.
  562. calibration_status_store(CALIBRATION_STATUS_Z_CALIBRATION);
  563. eeprom_write_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 1); //run wizard
  564. farm_no = 0;
  565. farm_mode = false;
  566. eeprom_update_byte((uint8_t*)EEPROM_FARM_MODE, farm_mode);
  567. EEPROM_save_B(EEPROM_FARM_NUMBER, &farm_no);
  568. eeprom_update_dword((uint32_t *)EEPROM_TOTALTIME, 0);
  569. eeprom_update_dword((uint32_t *)EEPROM_FILAMENTUSED, 0);
  570. eeprom_update_word((uint16_t *)EEPROM_CRASH_COUNT_X_TOT, 0);
  571. eeprom_update_word((uint16_t *)EEPROM_CRASH_COUNT_Y_TOT, 0);
  572. eeprom_update_word((uint16_t *)EEPROM_FERROR_COUNT_TOT, 0);
  573. eeprom_update_word((uint16_t *)EEPROM_POWER_COUNT_TOT, 0);
  574. eeprom_update_word((uint16_t *)EEPROM_MMU_FAIL_TOT, 0);
  575. eeprom_update_word((uint16_t *)EEPROM_MMU_LOAD_FAIL_TOT, 0);
  576. eeprom_update_byte((uint8_t *)EEPROM_MMU_FAIL, 0);
  577. eeprom_update_byte((uint8_t *)EEPROM_MMU_LOAD_FAIL, 0);
  578. #ifdef FILAMENT_SENSOR
  579. fsensor_enable();
  580. fsensor_autoload_set(true);
  581. #endif //FILAMENT_SENSOR
  582. if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
  583. WRITE(BEEPER, HIGH);
  584. _delay_ms(100);
  585. WRITE(BEEPER, LOW);
  586. //_delay_ms(2000);
  587. break;
  588. // Level 3: erase everything, whole EEPROM will be set to 0xFF
  589. case 3:
  590. lcd_puts_P(PSTR("Factory RESET"));
  591. lcd_puts_at_P(1, 2, PSTR("ERASING all data"));
  592. if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
  593. WRITE(BEEPER, HIGH);
  594. _delay_ms(100);
  595. WRITE(BEEPER, LOW);
  596. er_progress = 0;
  597. lcd_puts_at_P(3, 3, PSTR(" "));
  598. lcd_set_cursor(3, 3);
  599. lcd_print(er_progress);
  600. // Erase EEPROM
  601. for (int i = 0; i < 4096; i++) {
  602. eeprom_update_byte((uint8_t*)i, 0xFF);
  603. if (i % 41 == 0) {
  604. er_progress++;
  605. lcd_puts_at_P(3, 3, PSTR(" "));
  606. lcd_set_cursor(3, 3);
  607. lcd_print(er_progress);
  608. lcd_puts_P(PSTR("%"));
  609. }
  610. }
  611. break;
  612. case 4:
  613. bowden_menu();
  614. break;
  615. default:
  616. break;
  617. }
  618. }
  619. extern "C" {
  620. FILE _uartout; //= {0}; Global variable is always zero initialized. No need to explicitly state this.
  621. }
  622. int uart_putchar(char c, FILE *)
  623. {
  624. MYSERIAL.write(c);
  625. return 0;
  626. }
  627. void lcd_splash()
  628. {
  629. // lcd_puts_at_P(0, 1, PSTR(" Original Prusa "));
  630. // lcd_puts_at_P(0, 2, PSTR(" 3D Printers "));
  631. // lcd_puts_P(PSTR("\x1b[1;3HOriginal Prusa\x1b[2;4H3D Printers"));
  632. // fputs_P(PSTR(ESC_2J ESC_H(1,1) "Original Prusa i3" ESC_H(3,2) "Prusa Research"), lcdout);
  633. lcd_puts_P(PSTR(ESC_2J ESC_H(1,1) "Original Prusa i3" ESC_H(3,2) "Prusa Research"));
  634. // lcd_printf_P(_N(ESC_2J "x:%.3f\ny:%.3f\nz:%.3f\ne:%.3f"), _x, _y, _z, _e);
  635. }
  636. void factory_reset()
  637. {
  638. KEEPALIVE_STATE(PAUSED_FOR_USER);
  639. if (!READ(BTN_ENC))
  640. {
  641. _delay_ms(1000);
  642. if (!READ(BTN_ENC))
  643. {
  644. lcd_clear();
  645. lcd_puts_P(PSTR("Factory RESET"));
  646. SET_OUTPUT(BEEPER);
  647. if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
  648. WRITE(BEEPER, HIGH);
  649. while (!READ(BTN_ENC));
  650. WRITE(BEEPER, LOW);
  651. _delay_ms(2000);
  652. char level = reset_menu();
  653. factory_reset(level);
  654. switch (level) {
  655. case 0: _delay_ms(0); break;
  656. case 1: _delay_ms(0); break;
  657. case 2: _delay_ms(0); break;
  658. case 3: _delay_ms(0); break;
  659. }
  660. }
  661. }
  662. KEEPALIVE_STATE(IN_HANDLER);
  663. }
  664. void show_fw_version_warnings() {
  665. if (FW_DEV_VERSION == FW_VERSION_GOLD || FW_DEV_VERSION == FW_VERSION_RC) return;
  666. switch (FW_DEV_VERSION) {
  667. case(FW_VERSION_ALPHA): lcd_show_fullscreen_message_and_wait_P(_i("You are using firmware alpha version. This is development version. Using this version is not recommended and may cause printer damage.")); break;////MSG_FW_VERSION_ALPHA c=20 r=8
  668. case(FW_VERSION_BETA): lcd_show_fullscreen_message_and_wait_P(_i("You are using firmware beta version. This is development version. Using this version is not recommended and may cause printer damage.")); break;////MSG_FW_VERSION_BETA c=20 r=8
  669. case(FW_VERSION_DEVEL):
  670. case(FW_VERSION_DEBUG):
  671. lcd_update_enable(false);
  672. lcd_clear();
  673. #if FW_DEV_VERSION == FW_VERSION_DEVEL
  674. lcd_puts_at_P(0, 0, PSTR("Development build !!"));
  675. #else
  676. lcd_puts_at_P(0, 0, PSTR("Debbugging build !!!"));
  677. #endif
  678. lcd_puts_at_P(0, 1, PSTR("May destroy printer!"));
  679. lcd_puts_at_P(0, 2, PSTR("ver ")); lcd_puts_P(PSTR(FW_VERSION_FULL));
  680. lcd_puts_at_P(0, 3, PSTR(FW_REPOSITORY));
  681. lcd_wait_for_click();
  682. break;
  683. // default: lcd_show_fullscreen_message_and_wait_P(_i("WARNING: This is an unofficial, unsupported build. Use at your own risk!")); break;////MSG_FW_VERSION_UNKNOWN c=20 r=8
  684. }
  685. lcd_update_enable(true);
  686. }
  687. //! @brief try to check if firmware is on right type of printer
  688. static void check_if_fw_is_on_right_printer(){
  689. #ifdef FILAMENT_SENSOR
  690. if((PRINTER_TYPE == PRINTER_MK3) || (PRINTER_TYPE == PRINTER_MK3S)){
  691. #ifdef IR_SENSOR
  692. swi2c_init();
  693. const uint8_t pat9125_detected = swi2c_readByte_A8(PAT9125_I2C_ADDR,0x00,NULL);
  694. if (pat9125_detected){
  695. lcd_show_fullscreen_message_and_wait_P(_i("MK3S firmware detected on MK3 printer"));}
  696. #endif //IR_SENSOR
  697. #ifdef PAT9125
  698. //will return 1 only if IR can detect filament in bondtech extruder so this may fail even when we have IR sensor
  699. const uint8_t ir_detected = !(PIN_GET(IR_SENSOR_PIN));
  700. if (ir_detected){
  701. lcd_show_fullscreen_message_and_wait_P(_i("MK3 firmware detected on MK3S printer"));}
  702. #endif //PAT9125
  703. }
  704. #endif //FILAMENT_SENSOR
  705. }
  706. uint8_t check_printer_version()
  707. {
  708. uint8_t version_changed = 0;
  709. uint16_t printer_type = eeprom_read_word((uint16_t*)EEPROM_PRINTER_TYPE);
  710. uint16_t motherboard = eeprom_read_word((uint16_t*)EEPROM_BOARD_TYPE);
  711. if (printer_type != PRINTER_TYPE) {
  712. if (printer_type == 0xffff) eeprom_write_word((uint16_t*)EEPROM_PRINTER_TYPE, PRINTER_TYPE);
  713. else version_changed |= 0b10;
  714. }
  715. if (motherboard != MOTHERBOARD) {
  716. if(motherboard == 0xffff) eeprom_write_word((uint16_t*)EEPROM_BOARD_TYPE, MOTHERBOARD);
  717. else version_changed |= 0b01;
  718. }
  719. return version_changed;
  720. }
  721. #ifdef BOOTAPP
  722. #include "bootapp.h" //bootloader support
  723. #endif //BOOTAPP
  724. #if (LANG_MODE != 0) //secondary language support
  725. #ifdef W25X20CL
  726. // language update from external flash
  727. #define LANGBOOT_BLOCKSIZE 0x1000u
  728. #define LANGBOOT_RAMBUFFER 0x0800
  729. void update_sec_lang_from_external_flash()
  730. {
  731. if ((boot_app_magic == BOOT_APP_MAGIC) && (boot_app_flags & BOOT_APP_FLG_USER0))
  732. {
  733. uint8_t lang = boot_reserved >> 4;
  734. uint8_t state = boot_reserved & 0xf;
  735. lang_table_header_t header;
  736. uint32_t src_addr;
  737. if (lang_get_header(lang, &header, &src_addr))
  738. {
  739. fputs_P(PSTR(ESC_H(1,3) "Language update."), lcdout);
  740. for (uint8_t i = 0; i < state; i++) fputc('.', lcdout);
  741. _delay(100);
  742. boot_reserved = (state + 1) | (lang << 4);
  743. if ((state * LANGBOOT_BLOCKSIZE) < header.size)
  744. {
  745. cli();
  746. uint16_t size = header.size - state * LANGBOOT_BLOCKSIZE;
  747. if (size > LANGBOOT_BLOCKSIZE) size = LANGBOOT_BLOCKSIZE;
  748. w25x20cl_rd_data(src_addr + state * LANGBOOT_BLOCKSIZE, (uint8_t*)LANGBOOT_RAMBUFFER, size);
  749. if (state == 0)
  750. {
  751. //TODO - check header integrity
  752. }
  753. bootapp_ram2flash(LANGBOOT_RAMBUFFER, _SEC_LANG_TABLE + state * LANGBOOT_BLOCKSIZE, size);
  754. }
  755. else
  756. {
  757. //TODO - check sec lang data integrity
  758. eeprom_update_byte((unsigned char *)EEPROM_LANG, LANG_ID_SEC);
  759. }
  760. }
  761. }
  762. boot_app_flags &= ~BOOT_APP_FLG_USER0;
  763. }
  764. #ifdef DEBUG_W25X20CL
  765. uint8_t lang_xflash_enum_codes(uint16_t* codes)
  766. {
  767. lang_table_header_t header;
  768. uint8_t count = 0;
  769. uint32_t addr = 0x00000;
  770. while (1)
  771. {
  772. printf_P(_n("LANGTABLE%d:"), count);
  773. w25x20cl_rd_data(addr, (uint8_t*)&header, sizeof(lang_table_header_t));
  774. if (header.magic != LANG_MAGIC)
  775. {
  776. printf_P(_n("NG!\n"));
  777. break;
  778. }
  779. printf_P(_n("OK\n"));
  780. printf_P(_n(" _lt_magic = 0x%08lx %S\n"), header.magic, (header.magic==LANG_MAGIC)?_n("OK"):_n("NA"));
  781. printf_P(_n(" _lt_size = 0x%04x (%d)\n"), header.size, header.size);
  782. printf_P(_n(" _lt_count = 0x%04x (%d)\n"), header.count, header.count);
  783. printf_P(_n(" _lt_chsum = 0x%04x\n"), header.checksum);
  784. printf_P(_n(" _lt_code = 0x%04x (%c%c)\n"), header.code, header.code >> 8, header.code & 0xff);
  785. printf_P(_n(" _lt_sign = 0x%08lx\n"), header.signature);
  786. addr += header.size;
  787. codes[count] = header.code;
  788. count ++;
  789. }
  790. return count;
  791. }
  792. void list_sec_lang_from_external_flash()
  793. {
  794. uint16_t codes[8];
  795. uint8_t count = lang_xflash_enum_codes(codes);
  796. printf_P(_n("XFlash lang count = %hhd\n"), count);
  797. }
  798. #endif //DEBUG_W25X20CL
  799. #endif //W25X20CL
  800. #endif //(LANG_MODE != 0)
  801. static void w25x20cl_err_msg()
  802. {
  803. lcd_puts_P(_n(ESC_2J ESC_H(0,0) "External SPI flash" ESC_H(0,1) "W25X20CL is not res-"
  804. ESC_H(0,2) "ponding. Language" ESC_H(0,3) "switch unavailable."));
  805. }
  806. // "Setup" function is called by the Arduino framework on startup.
  807. // Before startup, the Timers-functions (PWM)/Analog RW and HardwareSerial provided by the Arduino-code
  808. // are initialized by the main() routine provided by the Arduino framework.
  809. void setup()
  810. {
  811. mmu_init();
  812. ultralcd_init();
  813. #if (LCD_BL_PIN != -1) && defined (LCD_BL_PIN)
  814. analogWrite(LCD_BL_PIN, 255); //set full brightnes
  815. #endif //(LCD_BL_PIN != -1) && defined (LCD_BL_PIN)
  816. spi_init();
  817. lcd_splash();
  818. Sound_Init(); // also guarantee "SET_OUTPUT(BEEPER)"
  819. #ifdef W25X20CL
  820. bool w25x20cl_success = w25x20cl_init();
  821. if (w25x20cl_success)
  822. {
  823. optiboot_w25x20cl_enter();
  824. #if (LANG_MODE != 0) //secondary language support
  825. update_sec_lang_from_external_flash();
  826. #endif //(LANG_MODE != 0)
  827. }
  828. else
  829. {
  830. w25x20cl_err_msg();
  831. }
  832. #else
  833. const bool w25x20cl_success = true;
  834. #endif //W25X20CL
  835. setup_killpin();
  836. setup_powerhold();
  837. farm_mode = eeprom_read_byte((uint8_t*)EEPROM_FARM_MODE);
  838. EEPROM_read_B(EEPROM_FARM_NUMBER, &farm_no);
  839. if ((farm_mode == 0xFF && farm_no == 0) || ((uint16_t)farm_no == 0xFFFF))
  840. farm_mode = false; //if farm_mode has not been stored to eeprom yet and farm number is set to zero or EEPROM is fresh, deactivate farm mode
  841. if ((uint16_t)farm_no == 0xFFFF) farm_no = 0;
  842. selectedSerialPort = eeprom_read_byte((uint8_t*)EEPROM_SECOND_SERIAL_ACTIVE);
  843. if (selectedSerialPort == 0xFF) selectedSerialPort = 0;
  844. if (farm_mode)
  845. {
  846. no_response = true; //we need confirmation by recieving PRUSA thx
  847. important_status = 8;
  848. prusa_statistics(8);
  849. selectedSerialPort = 1;
  850. #ifdef TMC2130
  851. //increased extruder current (PFW363)
  852. tmc2130_current_h[E_AXIS] = 36;
  853. tmc2130_current_r[E_AXIS] = 36;
  854. #endif //TMC2130
  855. #ifdef FILAMENT_SENSOR
  856. //disabled filament autoload (PFW360)
  857. fsensor_autoload_set(false);
  858. #endif //FILAMENT_SENSOR
  859. }
  860. MYSERIAL.begin(BAUDRATE);
  861. fdev_setup_stream(uartout, uart_putchar, NULL, _FDEV_SETUP_WRITE); //setup uart out stream
  862. #ifndef W25X20CL
  863. SERIAL_PROTOCOLLNPGM("start");
  864. #endif //W25X20CL
  865. stdout = uartout;
  866. SERIAL_ECHO_START;
  867. printf_P(PSTR(" " FW_VERSION_FULL "\n"));
  868. #ifdef DEBUG_SEC_LANG
  869. lang_table_header_t header;
  870. uint32_t src_addr = 0x00000;
  871. if (lang_get_header(1, &header, &src_addr))
  872. {
  873. //this is comparsion of some printing-methods regarding to flash space usage and code size/readability
  874. #define LT_PRINT_TEST 2
  875. // flash usage
  876. // total p.test
  877. //0 252718 t+c text code
  878. //1 253142 424 170 254
  879. //2 253040 322 164 158
  880. //3 253248 530 135 395
  881. #if (LT_PRINT_TEST==1) //not optimized printf
  882. printf_P(_n(" _src_addr = 0x%08lx\n"), src_addr);
  883. printf_P(_n(" _lt_magic = 0x%08lx %S\n"), header.magic, (header.magic==LANG_MAGIC)?_n("OK"):_n("NA"));
  884. printf_P(_n(" _lt_size = 0x%04x (%d)\n"), header.size, header.size);
  885. printf_P(_n(" _lt_count = 0x%04x (%d)\n"), header.count, header.count);
  886. printf_P(_n(" _lt_chsum = 0x%04x\n"), header.checksum);
  887. printf_P(_n(" _lt_code = 0x%04x (%c%c)\n"), header.code, header.code >> 8, header.code & 0xff);
  888. printf_P(_n(" _lt_sign = 0x%08lx\n"), header.signature);
  889. #elif (LT_PRINT_TEST==2) //optimized printf
  890. printf_P(
  891. _n(
  892. " _src_addr = 0x%08lx\n"
  893. " _lt_magic = 0x%08lx %S\n"
  894. " _lt_size = 0x%04x (%d)\n"
  895. " _lt_count = 0x%04x (%d)\n"
  896. " _lt_chsum = 0x%04x\n"
  897. " _lt_code = 0x%04x (%c%c)\n"
  898. " _lt_resv1 = 0x%08lx\n"
  899. ),
  900. src_addr,
  901. header.magic, (header.magic==LANG_MAGIC)?_n("OK"):_n("NA"),
  902. header.size, header.size,
  903. header.count, header.count,
  904. header.checksum,
  905. header.code, header.code >> 8, header.code & 0xff,
  906. header.signature
  907. );
  908. #elif (LT_PRINT_TEST==3) //arduino print/println (leading zeros not solved)
  909. MYSERIAL.print(" _src_addr = 0x");
  910. MYSERIAL.println(src_addr, 16);
  911. MYSERIAL.print(" _lt_magic = 0x");
  912. MYSERIAL.print(header.magic, 16);
  913. MYSERIAL.println((header.magic==LANG_MAGIC)?" OK":" NA");
  914. MYSERIAL.print(" _lt_size = 0x");
  915. MYSERIAL.print(header.size, 16);
  916. MYSERIAL.print(" (");
  917. MYSERIAL.print(header.size, 10);
  918. MYSERIAL.println(")");
  919. MYSERIAL.print(" _lt_count = 0x");
  920. MYSERIAL.print(header.count, 16);
  921. MYSERIAL.print(" (");
  922. MYSERIAL.print(header.count, 10);
  923. MYSERIAL.println(")");
  924. MYSERIAL.print(" _lt_chsum = 0x");
  925. MYSERIAL.println(header.checksum, 16);
  926. MYSERIAL.print(" _lt_code = 0x");
  927. MYSERIAL.print(header.code, 16);
  928. MYSERIAL.print(" (");
  929. MYSERIAL.print((char)(header.code >> 8), 0);
  930. MYSERIAL.print((char)(header.code & 0xff), 0);
  931. MYSERIAL.println(")");
  932. MYSERIAL.print(" _lt_resv1 = 0x");
  933. MYSERIAL.println(header.signature, 16);
  934. #endif //(LT_PRINT_TEST==)
  935. #undef LT_PRINT_TEST
  936. #if 0
  937. w25x20cl_rd_data(0x25ba, (uint8_t*)&block_buffer, 1024);
  938. for (uint16_t i = 0; i < 1024; i++)
  939. {
  940. if ((i % 16) == 0) printf_P(_n("%04x:"), 0x25ba+i);
  941. printf_P(_n(" %02x"), ((uint8_t*)&block_buffer)[i]);
  942. if ((i % 16) == 15) putchar('\n');
  943. }
  944. #endif
  945. uint16_t sum = 0;
  946. for (uint16_t i = 0; i < header.size; i++)
  947. sum += (uint16_t)pgm_read_byte((uint8_t*)(_SEC_LANG_TABLE + i)) << ((i & 1)?0:8);
  948. printf_P(_n("_SEC_LANG_TABLE checksum = %04x\n"), sum);
  949. sum -= header.checksum; //subtract checksum
  950. printf_P(_n("_SEC_LANG_TABLE checksum = %04x\n"), sum);
  951. sum = (sum >> 8) | ((sum & 0xff) << 8); //swap bytes
  952. if (sum == header.checksum)
  953. printf_P(_n("Checksum OK\n"), sum);
  954. else
  955. printf_P(_n("Checksum NG\n"), sum);
  956. }
  957. else
  958. printf_P(_n("lang_get_header failed!\n"));
  959. #if 0
  960. for (uint16_t i = 0; i < 1024*10; i++)
  961. {
  962. if ((i % 16) == 0) printf_P(_n("%04x:"), _SEC_LANG_TABLE+i);
  963. printf_P(_n(" %02x"), pgm_read_byte((uint8_t*)(_SEC_LANG_TABLE+i)));
  964. if ((i % 16) == 15) putchar('\n');
  965. }
  966. #endif
  967. #if 0
  968. SERIAL_ECHOLN("Reading eeprom from 0 to 100: start");
  969. for (int i = 0; i < 4096; ++i) {
  970. int b = eeprom_read_byte((unsigned char*)i);
  971. if (b != 255) {
  972. SERIAL_ECHO(i);
  973. SERIAL_ECHO(":");
  974. SERIAL_ECHO(b);
  975. SERIAL_ECHOLN("");
  976. }
  977. }
  978. SERIAL_ECHOLN("Reading eeprom from 0 to 100: done");
  979. #endif
  980. #endif //DEBUG_SEC_LANG
  981. // Check startup - does nothing if bootloader sets MCUSR to 0
  982. byte mcu = MCUSR;
  983. /* if (mcu & 1) SERIAL_ECHOLNRPGM(MSG_POWERUP);
  984. if (mcu & 2) SERIAL_ECHOLNRPGM(MSG_EXTERNAL_RESET);
  985. if (mcu & 4) SERIAL_ECHOLNRPGM(MSG_BROWNOUT_RESET);
  986. if (mcu & 8) SERIAL_ECHOLNRPGM(MSG_WATCHDOG_RESET);
  987. if (mcu & 32) SERIAL_ECHOLNRPGM(MSG_SOFTWARE_RESET);*/
  988. if (mcu & 1) puts_P(MSG_POWERUP);
  989. if (mcu & 2) puts_P(MSG_EXTERNAL_RESET);
  990. if (mcu & 4) puts_P(MSG_BROWNOUT_RESET);
  991. if (mcu & 8) puts_P(MSG_WATCHDOG_RESET);
  992. if (mcu & 32) puts_P(MSG_SOFTWARE_RESET);
  993. MCUSR = 0;
  994. //SERIAL_ECHORPGM(MSG_MARLIN);
  995. //SERIAL_ECHOLNRPGM(VERSION_STRING);
  996. #ifdef STRING_VERSION_CONFIG_H
  997. #ifdef STRING_CONFIG_H_AUTHOR
  998. SERIAL_ECHO_START;
  999. SERIAL_ECHORPGM(_n(" Last Updated: "));////MSG_CONFIGURATION_VER
  1000. SERIAL_ECHOPGM(STRING_VERSION_CONFIG_H);
  1001. SERIAL_ECHORPGM(_n(" | Author: "));////MSG_AUTHOR
  1002. SERIAL_ECHOLNPGM(STRING_CONFIG_H_AUTHOR);
  1003. SERIAL_ECHOPGM("Compiled: ");
  1004. SERIAL_ECHOLNPGM(__DATE__);
  1005. #endif
  1006. #endif
  1007. SERIAL_ECHO_START;
  1008. SERIAL_ECHORPGM(_n(" Free Memory: "));////MSG_FREE_MEMORY
  1009. SERIAL_ECHO(freeMemory());
  1010. SERIAL_ECHORPGM(_n(" PlannerBufferBytes: "));////MSG_PLANNER_BUFFER_BYTES
  1011. SERIAL_ECHOLN((int)sizeof(block_t)*BLOCK_BUFFER_SIZE);
  1012. //lcd_update_enable(false); // why do we need this?? - andre
  1013. // loads data from EEPROM if available else uses defaults (and resets step acceleration rate)
  1014. bool previous_settings_retrieved = false;
  1015. uint8_t hw_changed = check_printer_version();
  1016. if (!(hw_changed & 0b10)) { //if printer version wasn't changed, check for eeprom version and retrieve settings from eeprom in case that version wasn't changed
  1017. previous_settings_retrieved = Config_RetrieveSettings();
  1018. }
  1019. else { //printer version was changed so use default settings
  1020. Config_ResetDefault();
  1021. }
  1022. SdFatUtil::set_stack_guard(); //writes magic number at the end of static variables to protect against overwriting static memory by stack
  1023. tp_init(); // Initialize temperature loop
  1024. if (w25x20cl_success) lcd_splash(); // we need to do this again, because tp_init() kills lcd
  1025. else
  1026. {
  1027. w25x20cl_err_msg();
  1028. printf_P(_n("W25X20CL not responding.\n"));
  1029. }
  1030. plan_init(); // Initialize planner;
  1031. factory_reset();
  1032. lcd_encoder_diff=0;
  1033. #ifdef TMC2130
  1034. uint8_t silentMode = eeprom_read_byte((uint8_t*)EEPROM_SILENT);
  1035. if (silentMode == 0xff) silentMode = 0;
  1036. tmc2130_mode = TMC2130_MODE_NORMAL;
  1037. uint8_t crashdet = eeprom_read_byte((uint8_t*)EEPROM_CRASH_DET);
  1038. if (crashdet && !farm_mode)
  1039. {
  1040. crashdet_enable();
  1041. puts_P(_N("CrashDetect ENABLED!"));
  1042. }
  1043. else
  1044. {
  1045. crashdet_disable();
  1046. puts_P(_N("CrashDetect DISABLED"));
  1047. }
  1048. #ifdef TMC2130_LINEARITY_CORRECTION
  1049. #ifdef TMC2130_LINEARITY_CORRECTION_XYZ
  1050. tmc2130_wave_fac[X_AXIS] = eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_X_FAC);
  1051. tmc2130_wave_fac[Y_AXIS] = eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_Y_FAC);
  1052. tmc2130_wave_fac[Z_AXIS] = eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_Z_FAC);
  1053. #endif //TMC2130_LINEARITY_CORRECTION_XYZ
  1054. tmc2130_wave_fac[E_AXIS] = eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_E_FAC);
  1055. if (tmc2130_wave_fac[X_AXIS] == 0xff) tmc2130_wave_fac[X_AXIS] = 0;
  1056. if (tmc2130_wave_fac[Y_AXIS] == 0xff) tmc2130_wave_fac[Y_AXIS] = 0;
  1057. if (tmc2130_wave_fac[Z_AXIS] == 0xff) tmc2130_wave_fac[Z_AXIS] = 0;
  1058. if (tmc2130_wave_fac[E_AXIS] == 0xff) tmc2130_wave_fac[E_AXIS] = 0;
  1059. #endif //TMC2130_LINEARITY_CORRECTION
  1060. #ifdef TMC2130_VARIABLE_RESOLUTION
  1061. tmc2130_mres[X_AXIS] = tmc2130_usteps2mres(cs.axis_ustep_resolution[X_AXIS]);
  1062. tmc2130_mres[Y_AXIS] = tmc2130_usteps2mres(cs.axis_ustep_resolution[Y_AXIS]);
  1063. tmc2130_mres[Z_AXIS] = tmc2130_usteps2mres(cs.axis_ustep_resolution[Z_AXIS]);
  1064. tmc2130_mres[E_AXIS] = tmc2130_usteps2mres(cs.axis_ustep_resolution[E_AXIS]);
  1065. #else //TMC2130_VARIABLE_RESOLUTION
  1066. tmc2130_mres[X_AXIS] = tmc2130_usteps2mres(TMC2130_USTEPS_XY);
  1067. tmc2130_mres[Y_AXIS] = tmc2130_usteps2mres(TMC2130_USTEPS_XY);
  1068. tmc2130_mres[Z_AXIS] = tmc2130_usteps2mres(TMC2130_USTEPS_Z);
  1069. tmc2130_mres[E_AXIS] = tmc2130_usteps2mres(TMC2130_USTEPS_E);
  1070. #endif //TMC2130_VARIABLE_RESOLUTION
  1071. #endif //TMC2130
  1072. #ifdef UVLO_SUPPORT
  1073. setup_uvlo_interrupt();
  1074. #endif //UVLO_SUPPORT
  1075. st_init(); // Initialize stepper, this enables interrupts!
  1076. #ifdef TMC2130
  1077. tmc2130_mode = silentMode?TMC2130_MODE_SILENT:TMC2130_MODE_NORMAL;
  1078. update_mode_profile();
  1079. tmc2130_init();
  1080. #endif //TMC2130
  1081. setup_photpin();
  1082. servo_init();
  1083. // Reset the machine correction matrix.
  1084. // It does not make sense to load the correction matrix until the machine is homed.
  1085. world2machine_reset();
  1086. #ifdef FILAMENT_SENSOR
  1087. fsensor_init();
  1088. #endif //FILAMENT_SENSOR
  1089. #if defined(CONTROLLERFAN_PIN) && (CONTROLLERFAN_PIN > -1)
  1090. SET_OUTPUT(CONTROLLERFAN_PIN); //Set pin used for driver cooling fan
  1091. #endif
  1092. setup_homepin();
  1093. #ifdef TMC2130
  1094. if (1) {
  1095. // try to run to zero phase before powering the Z motor.
  1096. // Move in negative direction
  1097. WRITE(Z_DIR_PIN,INVERT_Z_DIR);
  1098. // Round the current micro-micro steps to micro steps.
  1099. for (uint16_t phase = (tmc2130_rd_MSCNT(Z_AXIS) + 8) >> 4; phase > 0; -- phase) {
  1100. // Until the phase counter is reset to zero.
  1101. WRITE(Z_STEP_PIN, !INVERT_Z_STEP_PIN);
  1102. _delay(2);
  1103. WRITE(Z_STEP_PIN, INVERT_Z_STEP_PIN);
  1104. _delay(2);
  1105. }
  1106. }
  1107. #endif //TMC2130
  1108. #if defined(Z_AXIS_ALWAYS_ON)
  1109. enable_z();
  1110. #endif
  1111. farm_mode = eeprom_read_byte((uint8_t*)EEPROM_FARM_MODE);
  1112. EEPROM_read_B(EEPROM_FARM_NUMBER, &farm_no);
  1113. if ((farm_mode == 0xFF && farm_no == 0) || (farm_no == static_cast<int>(0xFFFF))) farm_mode = false; //if farm_mode has not been stored to eeprom yet and farm number is set to zero or EEPROM is fresh, deactivate farm mode
  1114. if (farm_no == static_cast<int>(0xFFFF)) farm_no = 0;
  1115. if (farm_mode)
  1116. {
  1117. prusa_statistics(8);
  1118. }
  1119. // Enable Toshiba FlashAir SD card / WiFi enahanced card.
  1120. card.ToshibaFlashAir_enable(eeprom_read_byte((unsigned char*)EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY) == 1);
  1121. if (eeprom_read_dword((uint32_t*)(EEPROM_TOP - 4)) == 0x0ffffffff &&
  1122. eeprom_read_dword((uint32_t*)(EEPROM_TOP - 8)) == 0x0ffffffff) {
  1123. // Maiden startup. The firmware has been loaded and first started on a virgin RAMBo board,
  1124. // where all the EEPROM entries are set to 0x0ff.
  1125. // Once a firmware boots up, it forces at least a language selection, which changes
  1126. // EEPROM_LANG to number lower than 0x0ff.
  1127. // 1) Set a high power mode.
  1128. #ifdef TMC2130
  1129. eeprom_write_byte((uint8_t*)EEPROM_SILENT, 0);
  1130. tmc2130_mode = TMC2130_MODE_NORMAL;
  1131. #endif //TMC2130
  1132. eeprom_write_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 1); //run wizard
  1133. }
  1134. // Force SD card update. Otherwise the SD card update is done from loop() on card.checkautostart(false),
  1135. // but this times out if a blocking dialog is shown in setup().
  1136. card.initsd();
  1137. #ifdef DEBUG_SD_SPEED_TEST
  1138. if (card.cardOK)
  1139. {
  1140. uint8_t* buff = (uint8_t*)block_buffer;
  1141. uint32_t block = 0;
  1142. uint32_t sumr = 0;
  1143. uint32_t sumw = 0;
  1144. for (int i = 0; i < 1024; i++)
  1145. {
  1146. uint32_t u = _micros();
  1147. bool res = card.card.readBlock(i, buff);
  1148. u = _micros() - u;
  1149. if (res)
  1150. {
  1151. printf_P(PSTR("readBlock %4d 512 bytes %lu us\n"), i, u);
  1152. sumr += u;
  1153. u = _micros();
  1154. res = card.card.writeBlock(i, buff);
  1155. u = _micros() - u;
  1156. if (res)
  1157. {
  1158. printf_P(PSTR("writeBlock %4d 512 bytes %lu us\n"), i, u);
  1159. sumw += u;
  1160. }
  1161. else
  1162. {
  1163. printf_P(PSTR("writeBlock %4d error\n"), i);
  1164. break;
  1165. }
  1166. }
  1167. else
  1168. {
  1169. printf_P(PSTR("readBlock %4d error\n"), i);
  1170. break;
  1171. }
  1172. }
  1173. uint32_t avg_rspeed = (1024 * 1000000) / (sumr / 512);
  1174. uint32_t avg_wspeed = (1024 * 1000000) / (sumw / 512);
  1175. printf_P(PSTR("avg read speed %lu bytes/s\n"), avg_rspeed);
  1176. printf_P(PSTR("avg write speed %lu bytes/s\n"), avg_wspeed);
  1177. }
  1178. else
  1179. printf_P(PSTR("Card NG!\n"));
  1180. #endif //DEBUG_SD_SPEED_TEST
  1181. if (eeprom_read_byte((uint8_t*)EEPROM_POWER_COUNT) == 0xff) eeprom_write_byte((uint8_t*)EEPROM_POWER_COUNT, 0);
  1182. if (eeprom_read_byte((uint8_t*)EEPROM_CRASH_COUNT_X) == 0xff) eeprom_write_byte((uint8_t*)EEPROM_CRASH_COUNT_X, 0);
  1183. if (eeprom_read_byte((uint8_t*)EEPROM_CRASH_COUNT_Y) == 0xff) eeprom_write_byte((uint8_t*)EEPROM_CRASH_COUNT_Y, 0);
  1184. if (eeprom_read_byte((uint8_t*)EEPROM_FERROR_COUNT) == 0xff) eeprom_write_byte((uint8_t*)EEPROM_FERROR_COUNT, 0);
  1185. if (eeprom_read_word((uint16_t*)EEPROM_POWER_COUNT_TOT) == 0xffff) eeprom_write_word((uint16_t*)EEPROM_POWER_COUNT_TOT, 0);
  1186. if (eeprom_read_word((uint16_t*)EEPROM_CRASH_COUNT_X_TOT) == 0xffff) eeprom_write_word((uint16_t*)EEPROM_CRASH_COUNT_X_TOT, 0);
  1187. if (eeprom_read_word((uint16_t*)EEPROM_CRASH_COUNT_Y_TOT) == 0xffff) eeprom_write_word((uint16_t*)EEPROM_CRASH_COUNT_Y_TOT, 0);
  1188. if (eeprom_read_word((uint16_t*)EEPROM_FERROR_COUNT_TOT) == 0xffff) eeprom_write_word((uint16_t*)EEPROM_FERROR_COUNT_TOT, 0);
  1189. if (eeprom_read_word((uint16_t*)EEPROM_MMU_FAIL_TOT) == 0xffff) eeprom_update_word((uint16_t *)EEPROM_MMU_FAIL_TOT, 0);
  1190. if (eeprom_read_word((uint16_t*)EEPROM_MMU_LOAD_FAIL_TOT) == 0xffff) eeprom_update_word((uint16_t *)EEPROM_MMU_LOAD_FAIL_TOT, 0);
  1191. if (eeprom_read_byte((uint8_t*)EEPROM_MMU_FAIL) == 0xff) eeprom_update_byte((uint8_t *)EEPROM_MMU_FAIL, 0);
  1192. if (eeprom_read_byte((uint8_t*)EEPROM_MMU_LOAD_FAIL) == 0xff) eeprom_update_byte((uint8_t *)EEPROM_MMU_LOAD_FAIL, 0);
  1193. #ifdef SNMM
  1194. if (eeprom_read_dword((uint32_t*)EEPROM_BOWDEN_LENGTH) == 0x0ffffffff) { //bowden length used for SNMM
  1195. int _z = BOWDEN_LENGTH;
  1196. for(int i = 0; i<4; i++) EEPROM_save_B(EEPROM_BOWDEN_LENGTH + i * 2, &_z);
  1197. }
  1198. #endif
  1199. // In the future, somewhere here would one compare the current firmware version against the firmware version stored in the EEPROM.
  1200. // If they differ, an update procedure may need to be performed. At the end of this block, the current firmware version
  1201. // is being written into the EEPROM, so the update procedure will be triggered only once.
  1202. #if (LANG_MODE != 0) //secondary language support
  1203. #ifdef DEBUG_W25X20CL
  1204. W25X20CL_SPI_ENTER();
  1205. uint8_t uid[8]; // 64bit unique id
  1206. w25x20cl_rd_uid(uid);
  1207. puts_P(_n("W25X20CL UID="));
  1208. for (uint8_t i = 0; i < 8; i ++)
  1209. printf_P(PSTR("%02hhx"), uid[i]);
  1210. putchar('\n');
  1211. list_sec_lang_from_external_flash();
  1212. #endif //DEBUG_W25X20CL
  1213. // lang_reset();
  1214. if (!lang_select(eeprom_read_byte((uint8_t*)EEPROM_LANG)))
  1215. lcd_language();
  1216. #ifdef DEBUG_SEC_LANG
  1217. uint16_t sec_lang_code = lang_get_code(1);
  1218. uint16_t ui = _SEC_LANG_TABLE; //table pointer
  1219. printf_P(_n("lang_selected=%d\nlang_table=0x%04x\nSEC_LANG_CODE=0x%04x (%c%c)\n"), lang_selected, ui, sec_lang_code, sec_lang_code >> 8, sec_lang_code & 0xff);
  1220. lang_print_sec_lang(uartout);
  1221. #endif //DEBUG_SEC_LANG
  1222. #endif //(LANG_MODE != 0)
  1223. if (eeprom_read_byte((uint8_t*)EEPROM_TEMP_CAL_ACTIVE) == 255) {
  1224. eeprom_write_byte((uint8_t*)EEPROM_TEMP_CAL_ACTIVE, 0);
  1225. temp_cal_active = false;
  1226. } else temp_cal_active = eeprom_read_byte((uint8_t*)EEPROM_TEMP_CAL_ACTIVE);
  1227. if (eeprom_read_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA) == 255) {
  1228. //eeprom_write_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 0);
  1229. eeprom_write_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 1);
  1230. int16_t z_shift = 0;
  1231. for (uint8_t i = 0; i < 5; i++) EEPROM_save_B(EEPROM_PROBE_TEMP_SHIFT + i * 2, &z_shift);
  1232. eeprom_write_byte((uint8_t*)EEPROM_TEMP_CAL_ACTIVE, 0);
  1233. temp_cal_active = false;
  1234. }
  1235. if (eeprom_read_byte((uint8_t*)EEPROM_UVLO) == 255) {
  1236. eeprom_write_byte((uint8_t*)EEPROM_UVLO, 0);
  1237. }
  1238. if (eeprom_read_byte((uint8_t*)EEPROM_SD_SORT) == 255) {
  1239. eeprom_write_byte((uint8_t*)EEPROM_SD_SORT, 0);
  1240. }
  1241. //mbl_mode_init();
  1242. mbl_settings_init();
  1243. SilentModeMenu_MMU = eeprom_read_byte((uint8_t*)EEPROM_MMU_STEALTH);
  1244. if (SilentModeMenu_MMU == 255) {
  1245. SilentModeMenu_MMU = 1;
  1246. eeprom_write_byte((uint8_t*)EEPROM_MMU_STEALTH, SilentModeMenu_MMU);
  1247. }
  1248. check_babystep(); //checking if Z babystep is in allowed range
  1249. #if !defined(DEBUG_DISABLE_FANCHECK) && defined(FANCHECK) && defined(TACH_1) && TACH_1 >-1
  1250. setup_fan_interrupt();
  1251. #endif //DEBUG_DISABLE_FANCHECK
  1252. #ifdef PAT9125
  1253. fsensor_setup_interrupt();
  1254. #endif //PAT9125
  1255. for (int i = 0; i<4; i++) EEPROM_read_B(EEPROM_BOWDEN_LENGTH + i * 2, &bowden_length[i]);
  1256. #ifndef DEBUG_DISABLE_STARTMSGS
  1257. KEEPALIVE_STATE(PAUSED_FOR_USER);
  1258. check_if_fw_is_on_right_printer();
  1259. show_fw_version_warnings();
  1260. switch (hw_changed) {
  1261. //if motherboard or printer type was changed inform user as it can indicate flashing wrong firmware version
  1262. //if user confirms with knob, new hw version (printer and/or motherboard) is written to eeprom and message will be not shown next time
  1263. case(0b01):
  1264. lcd_show_fullscreen_message_and_wait_P(_i("Warning: motherboard type changed.")); ////MSG_CHANGED_MOTHERBOARD c=20 r=4
  1265. eeprom_write_word((uint16_t*)EEPROM_BOARD_TYPE, MOTHERBOARD);
  1266. break;
  1267. case(0b10):
  1268. lcd_show_fullscreen_message_and_wait_P(_i("Warning: printer type changed.")); ////MSG_CHANGED_PRINTER c=20 r=4
  1269. eeprom_write_word((uint16_t*)EEPROM_PRINTER_TYPE, PRINTER_TYPE);
  1270. break;
  1271. case(0b11):
  1272. lcd_show_fullscreen_message_and_wait_P(_i("Warning: both printer type and motherboard type changed.")); ////MSG_CHANGED_BOTH c=20 r=4
  1273. eeprom_write_word((uint16_t*)EEPROM_PRINTER_TYPE, PRINTER_TYPE);
  1274. eeprom_write_word((uint16_t*)EEPROM_BOARD_TYPE, MOTHERBOARD);
  1275. break;
  1276. default: break; //no change, show no message
  1277. }
  1278. if (!previous_settings_retrieved) {
  1279. lcd_show_fullscreen_message_and_wait_P(_i("Old settings found. Default PID, Esteps etc. will be set.")); //if EEPROM version or printer type was changed, inform user that default setting were loaded////MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
  1280. Config_StoreSettings();
  1281. }
  1282. if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) == 1) {
  1283. lcd_wizard(WizState::Run);
  1284. }
  1285. if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) == 0) { //dont show calibration status messages if wizard is currently active
  1286. if (calibration_status() == CALIBRATION_STATUS_ASSEMBLED ||
  1287. calibration_status() == CALIBRATION_STATUS_UNKNOWN ||
  1288. calibration_status() == CALIBRATION_STATUS_XYZ_CALIBRATION) {
  1289. // Reset the babystepping values, so the printer will not move the Z axis up when the babystepping is enabled.
  1290. eeprom_update_word((uint16_t*)EEPROM_BABYSTEP_Z, 0);
  1291. // Show the message.
  1292. lcd_show_fullscreen_message_and_wait_P(_T(MSG_FOLLOW_CALIBRATION_FLOW));
  1293. }
  1294. else if (calibration_status() == CALIBRATION_STATUS_LIVE_ADJUST) {
  1295. // Show the message.
  1296. lcd_show_fullscreen_message_and_wait_P(_T(MSG_BABYSTEP_Z_NOT_SET));
  1297. lcd_update_enable(true);
  1298. }
  1299. else if (calibration_status() == CALIBRATION_STATUS_CALIBRATED && temp_cal_active == true && calibration_status_pinda() == false) {
  1300. //lcd_show_fullscreen_message_and_wait_P(_i("Temperature calibration has not been run yet"));////MSG_PINDA_NOT_CALIBRATED c=20 r=4
  1301. lcd_update_enable(true);
  1302. }
  1303. else if (calibration_status() == CALIBRATION_STATUS_Z_CALIBRATION) {
  1304. // Show the message.
  1305. lcd_show_fullscreen_message_and_wait_P(_T(MSG_FOLLOW_Z_CALIBRATION_FLOW));
  1306. }
  1307. }
  1308. #if !defined (DEBUG_DISABLE_FORCE_SELFTEST) && defined (TMC2130)
  1309. if (force_selftest_if_fw_version() && calibration_status() < CALIBRATION_STATUS_ASSEMBLED) {
  1310. lcd_show_fullscreen_message_and_wait_P(_i("Selftest will be run to calibrate accurate sensorless rehoming."));////MSG_FORCE_SELFTEST c=20 r=8
  1311. update_current_firmware_version_to_eeprom();
  1312. lcd_selftest();
  1313. }
  1314. #endif //TMC2130 && !DEBUG_DISABLE_FORCE_SELFTEST
  1315. KEEPALIVE_STATE(IN_PROCESS);
  1316. #endif //DEBUG_DISABLE_STARTMSGS
  1317. lcd_update_enable(true);
  1318. lcd_clear();
  1319. lcd_update(2);
  1320. // Store the currently running firmware into an eeprom,
  1321. // so the next time the firmware gets updated, it will know from which version it has been updated.
  1322. update_current_firmware_version_to_eeprom();
  1323. #ifdef TMC2130
  1324. tmc2130_home_origin[X_AXIS] = eeprom_read_byte((uint8_t*)EEPROM_TMC2130_HOME_X_ORIGIN);
  1325. tmc2130_home_bsteps[X_AXIS] = eeprom_read_byte((uint8_t*)EEPROM_TMC2130_HOME_X_BSTEPS);
  1326. tmc2130_home_fsteps[X_AXIS] = eeprom_read_byte((uint8_t*)EEPROM_TMC2130_HOME_X_FSTEPS);
  1327. if (tmc2130_home_origin[X_AXIS] == 0xff) tmc2130_home_origin[X_AXIS] = 0;
  1328. if (tmc2130_home_bsteps[X_AXIS] == 0xff) tmc2130_home_bsteps[X_AXIS] = 48;
  1329. if (tmc2130_home_fsteps[X_AXIS] == 0xff) tmc2130_home_fsteps[X_AXIS] = 48;
  1330. tmc2130_home_origin[Y_AXIS] = eeprom_read_byte((uint8_t*)EEPROM_TMC2130_HOME_Y_ORIGIN);
  1331. tmc2130_home_bsteps[Y_AXIS] = eeprom_read_byte((uint8_t*)EEPROM_TMC2130_HOME_Y_BSTEPS);
  1332. tmc2130_home_fsteps[Y_AXIS] = eeprom_read_byte((uint8_t*)EEPROM_TMC2130_HOME_Y_FSTEPS);
  1333. if (tmc2130_home_origin[Y_AXIS] == 0xff) tmc2130_home_origin[Y_AXIS] = 0;
  1334. if (tmc2130_home_bsteps[Y_AXIS] == 0xff) tmc2130_home_bsteps[Y_AXIS] = 48;
  1335. if (tmc2130_home_fsteps[Y_AXIS] == 0xff) tmc2130_home_fsteps[Y_AXIS] = 48;
  1336. tmc2130_home_enabled = eeprom_read_byte((uint8_t*)EEPROM_TMC2130_HOME_ENABLED);
  1337. if (tmc2130_home_enabled == 0xff) tmc2130_home_enabled = 0;
  1338. #endif //TMC2130
  1339. #ifdef UVLO_SUPPORT
  1340. if (eeprom_read_byte((uint8_t*)EEPROM_UVLO) != 0) { //previous print was terminated by UVLO
  1341. /*
  1342. if (lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_RECOVER_PRINT), false)) recover_print();
  1343. else {
  1344. eeprom_update_byte((uint8_t*)EEPROM_UVLO, 0);
  1345. lcd_update_enable(true);
  1346. lcd_update(2);
  1347. lcd_setstatuspgm(_T(WELCOME_MSG));
  1348. }
  1349. */
  1350. manage_heater(); // Update temperatures
  1351. #ifdef DEBUG_UVLO_AUTOMATIC_RECOVER
  1352. printf_P(_N("Power panic detected!\nCurrent bed temp:%d\nSaved bed temp:%d\n"), (int)degBed(), eeprom_read_byte((uint8_t*)EEPROM_UVLO_TARGET_BED));
  1353. #endif
  1354. if ( degBed() > ( (float)eeprom_read_byte((uint8_t*)EEPROM_UVLO_TARGET_BED) - AUTOMATIC_UVLO_BED_TEMP_OFFSET) ){
  1355. #ifdef DEBUG_UVLO_AUTOMATIC_RECOVER
  1356. puts_P(_N("Automatic recovery!"));
  1357. #endif
  1358. recover_print(1);
  1359. }
  1360. else{
  1361. #ifdef DEBUG_UVLO_AUTOMATIC_RECOVER
  1362. puts_P(_N("Normal recovery!"));
  1363. #endif
  1364. if ( lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_RECOVER_PRINT), false) ) recover_print(0);
  1365. else {
  1366. eeprom_update_byte((uint8_t*)EEPROM_UVLO, 0);
  1367. lcd_update_enable(true);
  1368. lcd_update(2);
  1369. lcd_setstatuspgm(_T(WELCOME_MSG));
  1370. }
  1371. }
  1372. }
  1373. #endif //UVLO_SUPPORT
  1374. KEEPALIVE_STATE(NOT_BUSY);
  1375. #ifdef WATCHDOG
  1376. wdt_enable(WDTO_4S);
  1377. #endif //WATCHDOG
  1378. }
  1379. void trace();
  1380. #define CHUNK_SIZE 64 // bytes
  1381. #define SAFETY_MARGIN 1
  1382. char chunk[CHUNK_SIZE+SAFETY_MARGIN];
  1383. int chunkHead = 0;
  1384. void serial_read_stream() {
  1385. setAllTargetHotends(0);
  1386. setTargetBed(0);
  1387. lcd_clear();
  1388. lcd_puts_P(PSTR(" Upload in progress"));
  1389. // first wait for how many bytes we will receive
  1390. uint32_t bytesToReceive;
  1391. // receive the four bytes
  1392. char bytesToReceiveBuffer[4];
  1393. for (int i=0; i<4; i++) {
  1394. int data;
  1395. while ((data = MYSERIAL.read()) == -1) {};
  1396. bytesToReceiveBuffer[i] = data;
  1397. }
  1398. // make it a uint32
  1399. memcpy(&bytesToReceive, &bytesToReceiveBuffer, 4);
  1400. // we're ready, notify the sender
  1401. MYSERIAL.write('+');
  1402. // lock in the routine
  1403. uint32_t receivedBytes = 0;
  1404. while (prusa_sd_card_upload) {
  1405. int i;
  1406. for (i=0; i<CHUNK_SIZE; i++) {
  1407. int data;
  1408. // check if we're not done
  1409. if (receivedBytes == bytesToReceive) {
  1410. break;
  1411. }
  1412. // read the next byte
  1413. while ((data = MYSERIAL.read()) == -1) {};
  1414. receivedBytes++;
  1415. // save it to the chunk
  1416. chunk[i] = data;
  1417. }
  1418. // write the chunk to SD
  1419. card.write_command_no_newline(&chunk[0]);
  1420. // notify the sender we're ready for more data
  1421. MYSERIAL.write('+');
  1422. // for safety
  1423. manage_heater();
  1424. // check if we're done
  1425. if(receivedBytes == bytesToReceive) {
  1426. trace(); // beep
  1427. card.closefile();
  1428. prusa_sd_card_upload = false;
  1429. SERIAL_PROTOCOLLNRPGM(MSG_FILE_SAVED);
  1430. }
  1431. }
  1432. }
  1433. /**
  1434. * Output a "busy" message at regular intervals
  1435. * while the machine is not accepting commands.
  1436. */
  1437. void host_keepalive() {
  1438. #ifndef HOST_KEEPALIVE_FEATURE
  1439. return;
  1440. #endif //HOST_KEEPALIVE_FEATURE
  1441. if (farm_mode) return;
  1442. long ms = _millis();
  1443. if (host_keepalive_interval && busy_state != NOT_BUSY) {
  1444. if ((ms - prev_busy_signal_ms) < (long)(1000L * host_keepalive_interval)) return;
  1445. switch (busy_state) {
  1446. case IN_HANDLER:
  1447. case IN_PROCESS:
  1448. SERIAL_ECHO_START;
  1449. SERIAL_ECHOLNPGM("busy: processing");
  1450. break;
  1451. case PAUSED_FOR_USER:
  1452. SERIAL_ECHO_START;
  1453. SERIAL_ECHOLNPGM("busy: paused for user");
  1454. break;
  1455. case PAUSED_FOR_INPUT:
  1456. SERIAL_ECHO_START;
  1457. SERIAL_ECHOLNPGM("busy: paused for input");
  1458. break;
  1459. default:
  1460. break;
  1461. }
  1462. }
  1463. prev_busy_signal_ms = ms;
  1464. }
  1465. // The loop() function is called in an endless loop by the Arduino framework from the default main() routine.
  1466. // Before loop(), the setup() function is called by the main() routine.
  1467. void loop()
  1468. {
  1469. KEEPALIVE_STATE(NOT_BUSY);
  1470. if ((usb_printing_counter > 0) && ((_millis()-_usb_timer) > 1000))
  1471. {
  1472. is_usb_printing = true;
  1473. usb_printing_counter--;
  1474. _usb_timer = _millis();
  1475. }
  1476. if (usb_printing_counter == 0)
  1477. {
  1478. is_usb_printing = false;
  1479. }
  1480. if (prusa_sd_card_upload)
  1481. {
  1482. //we read byte-by byte
  1483. serial_read_stream();
  1484. } else
  1485. {
  1486. get_command();
  1487. #ifdef SDSUPPORT
  1488. card.checkautostart(false);
  1489. #endif
  1490. if(buflen)
  1491. {
  1492. cmdbuffer_front_already_processed = false;
  1493. #ifdef SDSUPPORT
  1494. if(card.saving)
  1495. {
  1496. // Saving a G-code file onto an SD-card is in progress.
  1497. // Saving starts with M28, saving until M29 is seen.
  1498. if(strstr_P(CMDBUFFER_CURRENT_STRING, PSTR("M29")) == NULL) {
  1499. card.write_command(CMDBUFFER_CURRENT_STRING);
  1500. if(card.logging)
  1501. process_commands();
  1502. else
  1503. SERIAL_PROTOCOLLNRPGM(MSG_OK);
  1504. } else {
  1505. card.closefile();
  1506. SERIAL_PROTOCOLLNRPGM(MSG_FILE_SAVED);
  1507. }
  1508. } else {
  1509. process_commands();
  1510. }
  1511. #else
  1512. process_commands();
  1513. #endif //SDSUPPORT
  1514. if (! cmdbuffer_front_already_processed && buflen)
  1515. {
  1516. // ptr points to the start of the block currently being processed.
  1517. // The first character in the block is the block type.
  1518. char *ptr = cmdbuffer + bufindr;
  1519. if (*ptr == CMDBUFFER_CURRENT_TYPE_SDCARD) {
  1520. // To support power panic, move the lenght of the command on the SD card to a planner buffer.
  1521. union {
  1522. struct {
  1523. char lo;
  1524. char hi;
  1525. } lohi;
  1526. uint16_t value;
  1527. } sdlen;
  1528. sdlen.value = 0;
  1529. {
  1530. // This block locks the interrupts globally for 3.25 us,
  1531. // which corresponds to a maximum repeat frequency of 307.69 kHz.
  1532. // This blocking is safe in the context of a 10kHz stepper driver interrupt
  1533. // or a 115200 Bd serial line receive interrupt, which will not trigger faster than 12kHz.
  1534. cli();
  1535. // Reset the command to something, which will be ignored by the power panic routine,
  1536. // so this buffer length will not be counted twice.
  1537. *ptr ++ = CMDBUFFER_CURRENT_TYPE_TO_BE_REMOVED;
  1538. // Extract the current buffer length.
  1539. sdlen.lohi.lo = *ptr ++;
  1540. sdlen.lohi.hi = *ptr;
  1541. // and pass it to the planner queue.
  1542. planner_add_sd_length(sdlen.value);
  1543. sei();
  1544. }
  1545. }
  1546. else if((*ptr == CMDBUFFER_CURRENT_TYPE_USB_WITH_LINENR) && !IS_SD_PRINTING){
  1547. cli();
  1548. *ptr ++ = CMDBUFFER_CURRENT_TYPE_TO_BE_REMOVED;
  1549. // and one for each command to previous block in the planner queue.
  1550. planner_add_sd_length(1);
  1551. sei();
  1552. }
  1553. // Now it is safe to release the already processed command block. If interrupted by the power panic now,
  1554. // this block's SD card length will not be counted twice as its command type has been replaced
  1555. // by CMDBUFFER_CURRENT_TYPE_TO_BE_REMOVED.
  1556. cmdqueue_pop_front();
  1557. }
  1558. host_keepalive();
  1559. }
  1560. }
  1561. //check heater every n milliseconds
  1562. manage_heater();
  1563. isPrintPaused ? manage_inactivity(true) : manage_inactivity(false);
  1564. checkHitEndstops();
  1565. lcd_update(0);
  1566. #ifdef TMC2130
  1567. tmc2130_check_overtemp();
  1568. if (tmc2130_sg_crash)
  1569. {
  1570. uint8_t crash = tmc2130_sg_crash;
  1571. tmc2130_sg_crash = 0;
  1572. // crashdet_stop_and_save_print();
  1573. switch (crash)
  1574. {
  1575. case 1: enquecommand_P((PSTR("CRASH_DETECTEDX"))); break;
  1576. case 2: enquecommand_P((PSTR("CRASH_DETECTEDY"))); break;
  1577. case 3: enquecommand_P((PSTR("CRASH_DETECTEDXY"))); break;
  1578. }
  1579. }
  1580. #endif //TMC2130
  1581. mmu_loop();
  1582. }
  1583. #define DEFINE_PGM_READ_ANY(type, reader) \
  1584. static inline type pgm_read_any(const type *p) \
  1585. { return pgm_read_##reader##_near(p); }
  1586. DEFINE_PGM_READ_ANY(float, float);
  1587. DEFINE_PGM_READ_ANY(signed char, byte);
  1588. #define XYZ_CONSTS_FROM_CONFIG(type, array, CONFIG) \
  1589. static const PROGMEM type array##_P[3] = \
  1590. { X_##CONFIG, Y_##CONFIG, Z_##CONFIG }; \
  1591. static inline type array(int axis) \
  1592. { return pgm_read_any(&array##_P[axis]); } \
  1593. type array##_ext(int axis) \
  1594. { return pgm_read_any(&array##_P[axis]); }
  1595. XYZ_CONSTS_FROM_CONFIG(float, base_min_pos, MIN_POS);
  1596. XYZ_CONSTS_FROM_CONFIG(float, base_max_pos, MAX_POS);
  1597. XYZ_CONSTS_FROM_CONFIG(float, base_home_pos, HOME_POS);
  1598. XYZ_CONSTS_FROM_CONFIG(float, max_length, MAX_LENGTH);
  1599. XYZ_CONSTS_FROM_CONFIG(float, home_retract_mm, HOME_RETRACT_MM);
  1600. XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR);
  1601. static void axis_is_at_home(int axis) {
  1602. current_position[axis] = base_home_pos(axis) + cs.add_homing[axis];
  1603. min_pos[axis] = base_min_pos(axis) + cs.add_homing[axis];
  1604. max_pos[axis] = base_max_pos(axis) + cs.add_homing[axis];
  1605. }
  1606. inline void set_current_to_destination() { memcpy(current_position, destination, sizeof(current_position)); }
  1607. inline void set_destination_to_current() { memcpy(destination, current_position, sizeof(destination)); }
  1608. //! @return original feedmultiply
  1609. static int setup_for_endstop_move(bool enable_endstops_now = true) {
  1610. saved_feedrate = feedrate;
  1611. int l_feedmultiply = feedmultiply;
  1612. feedmultiply = 100;
  1613. previous_millis_cmd = _millis();
  1614. enable_endstops(enable_endstops_now);
  1615. return l_feedmultiply;
  1616. }
  1617. //! @param original_feedmultiply feedmultiply to restore
  1618. static void clean_up_after_endstop_move(int original_feedmultiply) {
  1619. #ifdef ENDSTOPS_ONLY_FOR_HOMING
  1620. enable_endstops(false);
  1621. #endif
  1622. feedrate = saved_feedrate;
  1623. feedmultiply = original_feedmultiply;
  1624. previous_millis_cmd = _millis();
  1625. }
  1626. #ifdef ENABLE_AUTO_BED_LEVELING
  1627. #ifdef AUTO_BED_LEVELING_GRID
  1628. static void set_bed_level_equation_lsq(double *plane_equation_coefficients)
  1629. {
  1630. vector_3 planeNormal = vector_3(-plane_equation_coefficients[0], -plane_equation_coefficients[1], 1);
  1631. planeNormal.debug("planeNormal");
  1632. plan_bed_level_matrix = matrix_3x3::create_look_at(planeNormal);
  1633. //bedLevel.debug("bedLevel");
  1634. //plan_bed_level_matrix.debug("bed level before");
  1635. //vector_3 uncorrected_position = plan_get_position_mm();
  1636. //uncorrected_position.debug("position before");
  1637. vector_3 corrected_position = plan_get_position();
  1638. // corrected_position.debug("position after");
  1639. current_position[X_AXIS] = corrected_position.x;
  1640. current_position[Y_AXIS] = corrected_position.y;
  1641. current_position[Z_AXIS] = corrected_position.z;
  1642. // put the bed at 0 so we don't go below it.
  1643. current_position[Z_AXIS] = cs.zprobe_zoffset; // in the lsq we reach here after raising the extruder due to the loop structure
  1644. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  1645. }
  1646. #else // not AUTO_BED_LEVELING_GRID
  1647. static void set_bed_level_equation_3pts(float z_at_pt_1, float z_at_pt_2, float z_at_pt_3) {
  1648. plan_bed_level_matrix.set_to_identity();
  1649. vector_3 pt1 = vector_3(ABL_PROBE_PT_1_X, ABL_PROBE_PT_1_Y, z_at_pt_1);
  1650. vector_3 pt2 = vector_3(ABL_PROBE_PT_2_X, ABL_PROBE_PT_2_Y, z_at_pt_2);
  1651. vector_3 pt3 = vector_3(ABL_PROBE_PT_3_X, ABL_PROBE_PT_3_Y, z_at_pt_3);
  1652. vector_3 from_2_to_1 = (pt1 - pt2).get_normal();
  1653. vector_3 from_2_to_3 = (pt3 - pt2).get_normal();
  1654. vector_3 planeNormal = vector_3::cross(from_2_to_1, from_2_to_3).get_normal();
  1655. planeNormal = vector_3(planeNormal.x, planeNormal.y, abs(planeNormal.z));
  1656. plan_bed_level_matrix = matrix_3x3::create_look_at(planeNormal);
  1657. vector_3 corrected_position = plan_get_position();
  1658. current_position[X_AXIS] = corrected_position.x;
  1659. current_position[Y_AXIS] = corrected_position.y;
  1660. current_position[Z_AXIS] = corrected_position.z;
  1661. // put the bed at 0 so we don't go below it.
  1662. current_position[Z_AXIS] = cs.zprobe_zoffset;
  1663. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  1664. }
  1665. #endif // AUTO_BED_LEVELING_GRID
  1666. static void run_z_probe() {
  1667. plan_bed_level_matrix.set_to_identity();
  1668. feedrate = homing_feedrate[Z_AXIS];
  1669. // move down until you find the bed
  1670. float zPosition = -10;
  1671. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], zPosition, current_position[E_AXIS], feedrate/60, active_extruder);
  1672. st_synchronize();
  1673. // we have to let the planner know where we are right now as it is not where we said to go.
  1674. zPosition = st_get_position_mm(Z_AXIS);
  1675. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], zPosition, current_position[E_AXIS]);
  1676. // move up the retract distance
  1677. zPosition += home_retract_mm(Z_AXIS);
  1678. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], zPosition, current_position[E_AXIS], feedrate/60, active_extruder);
  1679. st_synchronize();
  1680. // move back down slowly to find bed
  1681. feedrate = homing_feedrate[Z_AXIS]/4;
  1682. zPosition -= home_retract_mm(Z_AXIS) * 2;
  1683. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], zPosition, current_position[E_AXIS], feedrate/60, active_extruder);
  1684. st_synchronize();
  1685. current_position[Z_AXIS] = st_get_position_mm(Z_AXIS);
  1686. // make sure the planner knows where we are as it may be a bit different than we last said to move to
  1687. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  1688. }
  1689. static void do_blocking_move_to(float x, float y, float z) {
  1690. float oldFeedRate = feedrate;
  1691. feedrate = homing_feedrate[Z_AXIS];
  1692. current_position[Z_AXIS] = z;
  1693. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate/60, active_extruder);
  1694. st_synchronize();
  1695. feedrate = XY_TRAVEL_SPEED;
  1696. current_position[X_AXIS] = x;
  1697. current_position[Y_AXIS] = y;
  1698. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate/60, active_extruder);
  1699. st_synchronize();
  1700. feedrate = oldFeedRate;
  1701. }
  1702. static void do_blocking_move_relative(float offset_x, float offset_y, float offset_z) {
  1703. do_blocking_move_to(current_position[X_AXIS] + offset_x, current_position[Y_AXIS] + offset_y, current_position[Z_AXIS] + offset_z);
  1704. }
  1705. /// Probe bed height at position (x,y), returns the measured z value
  1706. static float probe_pt(float x, float y, float z_before) {
  1707. // move to right place
  1708. do_blocking_move_to(current_position[X_AXIS], current_position[Y_AXIS], z_before);
  1709. do_blocking_move_to(x - X_PROBE_OFFSET_FROM_EXTRUDER, y - Y_PROBE_OFFSET_FROM_EXTRUDER, current_position[Z_AXIS]);
  1710. run_z_probe();
  1711. float measured_z = current_position[Z_AXIS];
  1712. SERIAL_PROTOCOLRPGM(_T(MSG_BED));
  1713. SERIAL_PROTOCOLPGM(" x: ");
  1714. SERIAL_PROTOCOL(x);
  1715. SERIAL_PROTOCOLPGM(" y: ");
  1716. SERIAL_PROTOCOL(y);
  1717. SERIAL_PROTOCOLPGM(" z: ");
  1718. SERIAL_PROTOCOL(measured_z);
  1719. SERIAL_PROTOCOLPGM("\n");
  1720. return measured_z;
  1721. }
  1722. #endif // #ifdef ENABLE_AUTO_BED_LEVELING
  1723. #ifdef LIN_ADVANCE
  1724. /**
  1725. * M900: Set and/or Get advance K factor and WH/D ratio
  1726. *
  1727. * K<factor> Set advance K factor
  1728. * R<ratio> Set ratio directly (overrides WH/D)
  1729. * W<width> H<height> D<diam> Set ratio from WH/D
  1730. */
  1731. inline void gcode_M900() {
  1732. st_synchronize();
  1733. const float newK = code_seen('K') ? code_value_float() : -1;
  1734. if (newK >= 0) extruder_advance_k = newK;
  1735. float newR = code_seen('R') ? code_value_float() : -1;
  1736. if (newR < 0) {
  1737. const float newD = code_seen('D') ? code_value_float() : -1,
  1738. newW = code_seen('W') ? code_value_float() : -1,
  1739. newH = code_seen('H') ? code_value_float() : -1;
  1740. if (newD >= 0 && newW >= 0 && newH >= 0)
  1741. newR = newD ? (newW * newH) / (sq(newD * 0.5) * M_PI) : 0;
  1742. }
  1743. if (newR >= 0) advance_ed_ratio = newR;
  1744. SERIAL_ECHO_START;
  1745. SERIAL_ECHOPGM("Advance K=");
  1746. SERIAL_ECHOLN(extruder_advance_k);
  1747. SERIAL_ECHOPGM(" E/D=");
  1748. const float ratio = advance_ed_ratio;
  1749. if (ratio) SERIAL_ECHOLN(ratio); else SERIAL_ECHOLNPGM("Auto");
  1750. }
  1751. #endif // LIN_ADVANCE
  1752. bool check_commands() {
  1753. bool end_command_found = false;
  1754. while (buflen)
  1755. {
  1756. if ((code_seen("M84")) || (code_seen("M 84"))) end_command_found = true;
  1757. if (!cmdbuffer_front_already_processed)
  1758. cmdqueue_pop_front();
  1759. cmdbuffer_front_already_processed = false;
  1760. }
  1761. return end_command_found;
  1762. }
  1763. #ifdef TMC2130
  1764. bool calibrate_z_auto()
  1765. {
  1766. //lcd_display_message_fullscreen_P(_T(MSG_CALIBRATE_Z_AUTO));
  1767. lcd_clear();
  1768. lcd_puts_at_P(0, 1, _T(MSG_CALIBRATE_Z_AUTO));
  1769. bool endstops_enabled = enable_endstops(true);
  1770. int axis_up_dir = -home_dir(Z_AXIS);
  1771. tmc2130_home_enter(Z_AXIS_MASK);
  1772. current_position[Z_AXIS] = 0;
  1773. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  1774. set_destination_to_current();
  1775. destination[Z_AXIS] += (1.1 * max_length(Z_AXIS) * axis_up_dir);
  1776. feedrate = homing_feedrate[Z_AXIS];
  1777. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate / 60, active_extruder);
  1778. st_synchronize();
  1779. // current_position[axis] = 0;
  1780. // plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  1781. tmc2130_home_exit();
  1782. enable_endstops(false);
  1783. current_position[Z_AXIS] = 0;
  1784. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  1785. set_destination_to_current();
  1786. destination[Z_AXIS] += 10 * axis_up_dir; //10mm up
  1787. feedrate = homing_feedrate[Z_AXIS] / 2;
  1788. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate / 60, active_extruder);
  1789. st_synchronize();
  1790. enable_endstops(endstops_enabled);
  1791. if (PRINTER_TYPE == PRINTER_MK3) {
  1792. current_position[Z_AXIS] = Z_MAX_POS + 2.0;
  1793. }
  1794. else {
  1795. current_position[Z_AXIS] = Z_MAX_POS + 9.0;
  1796. }
  1797. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  1798. return true;
  1799. }
  1800. #endif //TMC2130
  1801. #ifdef TMC2130
  1802. void homeaxis(int axis, uint8_t cnt, uint8_t* pstep)
  1803. #else
  1804. void homeaxis(int axis, uint8_t cnt)
  1805. #endif //TMC2130
  1806. {
  1807. bool endstops_enabled = enable_endstops(true); //RP: endstops should be allways enabled durring homing
  1808. #define HOMEAXIS_DO(LETTER) \
  1809. ((LETTER##_MIN_PIN > -1 && LETTER##_HOME_DIR==-1) || (LETTER##_MAX_PIN > -1 && LETTER##_HOME_DIR==1))
  1810. if ((axis==X_AXIS)?HOMEAXIS_DO(X):(axis==Y_AXIS)?HOMEAXIS_DO(Y):0)
  1811. {
  1812. int axis_home_dir = home_dir(axis);
  1813. feedrate = homing_feedrate[axis];
  1814. #ifdef TMC2130
  1815. tmc2130_home_enter(X_AXIS_MASK << axis);
  1816. #endif //TMC2130
  1817. // Move away a bit, so that the print head does not touch the end position,
  1818. // and the following movement to endstop has a chance to achieve the required velocity
  1819. // for the stall guard to work.
  1820. current_position[axis] = 0;
  1821. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  1822. set_destination_to_current();
  1823. // destination[axis] = 11.f;
  1824. destination[axis] = -3.f * axis_home_dir;
  1825. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
  1826. st_synchronize();
  1827. // Move away from the possible collision with opposite endstop with the collision detection disabled.
  1828. endstops_hit_on_purpose();
  1829. enable_endstops(false);
  1830. current_position[axis] = 0;
  1831. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  1832. destination[axis] = 1. * axis_home_dir;
  1833. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
  1834. st_synchronize();
  1835. // Now continue to move up to the left end stop with the collision detection enabled.
  1836. enable_endstops(true);
  1837. destination[axis] = 1.1 * axis_home_dir * max_length(axis);
  1838. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
  1839. st_synchronize();
  1840. for (uint8_t i = 0; i < cnt; i++)
  1841. {
  1842. // Move away from the collision to a known distance from the left end stop with the collision detection disabled.
  1843. endstops_hit_on_purpose();
  1844. enable_endstops(false);
  1845. current_position[axis] = 0;
  1846. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  1847. destination[axis] = -10.f * axis_home_dir;
  1848. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
  1849. st_synchronize();
  1850. endstops_hit_on_purpose();
  1851. // Now move left up to the collision, this time with a repeatable velocity.
  1852. enable_endstops(true);
  1853. destination[axis] = 11.f * axis_home_dir;
  1854. #ifdef TMC2130
  1855. feedrate = homing_feedrate[axis];
  1856. #else //TMC2130
  1857. feedrate = homing_feedrate[axis] / 2;
  1858. #endif //TMC2130
  1859. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
  1860. st_synchronize();
  1861. #ifdef TMC2130
  1862. uint16_t mscnt = tmc2130_rd_MSCNT(axis);
  1863. if (pstep) pstep[i] = mscnt >> 4;
  1864. printf_P(PSTR("%3d step=%2d mscnt=%4d\n"), i, mscnt >> 4, mscnt);
  1865. #endif //TMC2130
  1866. }
  1867. endstops_hit_on_purpose();
  1868. enable_endstops(false);
  1869. #ifdef TMC2130
  1870. uint8_t orig = tmc2130_home_origin[axis];
  1871. uint8_t back = tmc2130_home_bsteps[axis];
  1872. if (tmc2130_home_enabled && (orig <= 63))
  1873. {
  1874. tmc2130_goto_step(axis, orig, 2, 1000, tmc2130_get_res(axis));
  1875. if (back > 0)
  1876. tmc2130_do_steps(axis, back, -axis_home_dir, 1000);
  1877. }
  1878. else
  1879. tmc2130_do_steps(axis, 8, -axis_home_dir, 1000);
  1880. tmc2130_home_exit();
  1881. #endif //TMC2130
  1882. axis_is_at_home(axis);
  1883. axis_known_position[axis] = true;
  1884. // Move from minimum
  1885. #ifdef TMC2130
  1886. float dist = - axis_home_dir * 0.01f * tmc2130_home_fsteps[axis];
  1887. #else //TMC2130
  1888. float dist = - axis_home_dir * 0.01f * 64;
  1889. #endif //TMC2130
  1890. current_position[axis] -= dist;
  1891. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  1892. current_position[axis] += dist;
  1893. destination[axis] = current_position[axis];
  1894. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], 0.5f*feedrate/60, active_extruder);
  1895. st_synchronize();
  1896. feedrate = 0.0;
  1897. }
  1898. else if ((axis==Z_AXIS)?HOMEAXIS_DO(Z):0)
  1899. {
  1900. #ifdef TMC2130
  1901. FORCE_HIGH_POWER_START;
  1902. #endif
  1903. int axis_home_dir = home_dir(axis);
  1904. current_position[axis] = 0;
  1905. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  1906. destination[axis] = 1.5 * max_length(axis) * axis_home_dir;
  1907. feedrate = homing_feedrate[axis];
  1908. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
  1909. st_synchronize();
  1910. #ifdef TMC2130
  1911. if (READ(Z_TMC2130_DIAG) != 0) { //Z crash
  1912. FORCE_HIGH_POWER_END;
  1913. kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
  1914. return;
  1915. }
  1916. #endif //TMC2130
  1917. current_position[axis] = 0;
  1918. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  1919. destination[axis] = -home_retract_mm(axis) * axis_home_dir;
  1920. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
  1921. st_synchronize();
  1922. destination[axis] = 2*home_retract_mm(axis) * axis_home_dir;
  1923. feedrate = homing_feedrate[axis]/2 ;
  1924. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
  1925. st_synchronize();
  1926. #ifdef TMC2130
  1927. if (READ(Z_TMC2130_DIAG) != 0) { //Z crash
  1928. FORCE_HIGH_POWER_END;
  1929. kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
  1930. return;
  1931. }
  1932. #endif //TMC2130
  1933. axis_is_at_home(axis);
  1934. destination[axis] = current_position[axis];
  1935. feedrate = 0.0;
  1936. endstops_hit_on_purpose();
  1937. axis_known_position[axis] = true;
  1938. #ifdef TMC2130
  1939. FORCE_HIGH_POWER_END;
  1940. #endif
  1941. }
  1942. enable_endstops(endstops_enabled);
  1943. }
  1944. /**/
  1945. void home_xy()
  1946. {
  1947. set_destination_to_current();
  1948. homeaxis(X_AXIS);
  1949. homeaxis(Y_AXIS);
  1950. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  1951. endstops_hit_on_purpose();
  1952. }
  1953. void refresh_cmd_timeout(void)
  1954. {
  1955. previous_millis_cmd = _millis();
  1956. }
  1957. #ifdef FWRETRACT
  1958. void retract(bool retracting, bool swapretract = false) {
  1959. if(retracting && !retracted[active_extruder]) {
  1960. destination[X_AXIS]=current_position[X_AXIS];
  1961. destination[Y_AXIS]=current_position[Y_AXIS];
  1962. destination[Z_AXIS]=current_position[Z_AXIS];
  1963. destination[E_AXIS]=current_position[E_AXIS];
  1964. current_position[E_AXIS]+=(swapretract?retract_length_swap:cs.retract_length)*float(extrudemultiply)*0.01f;
  1965. plan_set_e_position(current_position[E_AXIS]);
  1966. float oldFeedrate = feedrate;
  1967. feedrate=cs.retract_feedrate*60;
  1968. retracted[active_extruder]=true;
  1969. prepare_move();
  1970. current_position[Z_AXIS]-=cs.retract_zlift;
  1971. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  1972. prepare_move();
  1973. feedrate = oldFeedrate;
  1974. } else if(!retracting && retracted[active_extruder]) {
  1975. destination[X_AXIS]=current_position[X_AXIS];
  1976. destination[Y_AXIS]=current_position[Y_AXIS];
  1977. destination[Z_AXIS]=current_position[Z_AXIS];
  1978. destination[E_AXIS]=current_position[E_AXIS];
  1979. current_position[Z_AXIS]+=cs.retract_zlift;
  1980. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  1981. current_position[E_AXIS]-=(swapretract?(retract_length_swap+retract_recover_length_swap):(cs.retract_length+cs.retract_recover_length))*float(extrudemultiply)*0.01f;
  1982. plan_set_e_position(current_position[E_AXIS]);
  1983. float oldFeedrate = feedrate;
  1984. feedrate=cs.retract_recover_feedrate*60;
  1985. retracted[active_extruder]=false;
  1986. prepare_move();
  1987. feedrate = oldFeedrate;
  1988. }
  1989. } //retract
  1990. #endif //FWRETRACT
  1991. void trace() {
  1992. //if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
  1993. _tone(BEEPER, 440);
  1994. _delay(25);
  1995. _noTone(BEEPER);
  1996. _delay(20);
  1997. }
  1998. /*
  1999. void ramming() {
  2000. // float tmp[4] = DEFAULT_MAX_FEEDRATE;
  2001. if (current_temperature[0] < 230) {
  2002. //PLA
  2003. max_feedrate[E_AXIS] = 50;
  2004. //current_position[E_AXIS] -= 8;
  2005. //plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 2100 / 60, active_extruder);
  2006. //current_position[E_AXIS] += 8;
  2007. //plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 2100 / 60, active_extruder);
  2008. current_position[E_AXIS] += 5.4;
  2009. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 2800 / 60, active_extruder);
  2010. current_position[E_AXIS] += 3.2;
  2011. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  2012. current_position[E_AXIS] += 3;
  2013. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3400 / 60, active_extruder);
  2014. st_synchronize();
  2015. max_feedrate[E_AXIS] = 80;
  2016. current_position[E_AXIS] -= 82;
  2017. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 9500 / 60, active_extruder);
  2018. max_feedrate[E_AXIS] = 50;//tmp[E_AXIS];
  2019. current_position[E_AXIS] -= 20;
  2020. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 1200 / 60, active_extruder);
  2021. current_position[E_AXIS] += 5;
  2022. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 400 / 60, active_extruder);
  2023. current_position[E_AXIS] += 5;
  2024. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600 / 60, active_extruder);
  2025. current_position[E_AXIS] -= 10;
  2026. st_synchronize();
  2027. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600 / 60, active_extruder);
  2028. current_position[E_AXIS] += 10;
  2029. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600 / 60, active_extruder);
  2030. current_position[E_AXIS] -= 10;
  2031. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 800 / 60, active_extruder);
  2032. current_position[E_AXIS] += 10;
  2033. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 800 / 60, active_extruder);
  2034. current_position[E_AXIS] -= 10;
  2035. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 800 / 60, active_extruder);
  2036. st_synchronize();
  2037. }
  2038. else {
  2039. //ABS
  2040. max_feedrate[E_AXIS] = 50;
  2041. //current_position[E_AXIS] -= 8;
  2042. //plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 2100 / 60, active_extruder);
  2043. //current_position[E_AXIS] += 8;
  2044. //plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 2100 / 60, active_extruder);
  2045. current_position[E_AXIS] += 3.1;
  2046. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 2000 / 60, active_extruder);
  2047. current_position[E_AXIS] += 3.1;
  2048. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 2500 / 60, active_extruder);
  2049. current_position[E_AXIS] += 4;
  2050. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  2051. st_synchronize();
  2052. //current_position[X_AXIS] += 23; //delay
  2053. //plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600/60, active_extruder); //delay
  2054. //current_position[X_AXIS] -= 23; //delay
  2055. //plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600/60, active_extruder); //delay
  2056. _delay(4700);
  2057. max_feedrate[E_AXIS] = 80;
  2058. current_position[E_AXIS] -= 92;
  2059. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 9900 / 60, active_extruder);
  2060. max_feedrate[E_AXIS] = 50;//tmp[E_AXIS];
  2061. current_position[E_AXIS] -= 5;
  2062. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 800 / 60, active_extruder);
  2063. current_position[E_AXIS] += 5;
  2064. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 400 / 60, active_extruder);
  2065. current_position[E_AXIS] -= 5;
  2066. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600 / 60, active_extruder);
  2067. st_synchronize();
  2068. current_position[E_AXIS] += 5;
  2069. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600 / 60, active_extruder);
  2070. current_position[E_AXIS] -= 5;
  2071. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600 / 60, active_extruder);
  2072. current_position[E_AXIS] += 5;
  2073. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600 / 60, active_extruder);
  2074. current_position[E_AXIS] -= 5;
  2075. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600 / 60, active_extruder);
  2076. st_synchronize();
  2077. }
  2078. }
  2079. */
  2080. #ifdef TMC2130
  2081. void force_high_power_mode(bool start_high_power_section) {
  2082. uint8_t silent;
  2083. silent = eeprom_read_byte((uint8_t*)EEPROM_SILENT);
  2084. if (silent == 1) {
  2085. //we are in silent mode, set to normal mode to enable crash detection
  2086. // Wait for the planner queue to drain and for the stepper timer routine to reach an idle state.
  2087. st_synchronize();
  2088. cli();
  2089. tmc2130_mode = (start_high_power_section == true) ? TMC2130_MODE_NORMAL : TMC2130_MODE_SILENT;
  2090. update_mode_profile();
  2091. tmc2130_init();
  2092. // We may have missed a stepper timer interrupt due to the time spent in the tmc2130_init() routine.
  2093. // Be safe than sorry, reset the stepper timer before re-enabling interrupts.
  2094. st_reset_timer();
  2095. sei();
  2096. }
  2097. }
  2098. #endif //TMC2130
  2099. #ifdef TMC2130
  2100. static void gcode_G28(bool home_x_axis, long home_x_value, bool home_y_axis, long home_y_value, bool home_z_axis, long home_z_value, bool calib, bool without_mbl)
  2101. #else
  2102. static void gcode_G28(bool home_x_axis, long home_x_value, bool home_y_axis, long home_y_value, bool home_z_axis, long home_z_value, bool without_mbl)
  2103. #endif //TMC2130
  2104. {
  2105. st_synchronize();
  2106. #if 0
  2107. SERIAL_ECHOPGM("G28, initial "); print_world_coordinates();
  2108. SERIAL_ECHOPGM("G28, initial "); print_physical_coordinates();
  2109. #endif
  2110. // Flag for the display update routine and to disable the print cancelation during homing.
  2111. homing_flag = true;
  2112. // Which axes should be homed?
  2113. bool home_x = home_x_axis;
  2114. bool home_y = home_y_axis;
  2115. bool home_z = home_z_axis;
  2116. // Either all X,Y,Z codes are present, or none of them.
  2117. bool home_all_axes = home_x == home_y && home_x == home_z;
  2118. if (home_all_axes)
  2119. // No X/Y/Z code provided means to home all axes.
  2120. home_x = home_y = home_z = true;
  2121. //if we are homing all axes, first move z higher to protect heatbed/steel sheet
  2122. if (home_all_axes) {
  2123. current_position[Z_AXIS] += MESH_HOME_Z_SEARCH;
  2124. feedrate = homing_feedrate[Z_AXIS];
  2125. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate / 60, active_extruder);
  2126. st_synchronize();
  2127. }
  2128. #ifdef ENABLE_AUTO_BED_LEVELING
  2129. plan_bed_level_matrix.set_to_identity(); //Reset the plane ("erase" all leveling data)
  2130. #endif //ENABLE_AUTO_BED_LEVELING
  2131. // Reset world2machine_rotation_and_skew and world2machine_shift, therefore
  2132. // the planner will not perform any adjustments in the XY plane.
  2133. // Wait for the motors to stop and update the current position with the absolute values.
  2134. world2machine_revert_to_uncorrected();
  2135. // For mesh bed leveling deactivate the matrix temporarily.
  2136. // It is necessary to disable the bed leveling for the X and Y homing moves, so that the move is performed
  2137. // in a single axis only.
  2138. // In case of re-homing the X or Y axes only, the mesh bed leveling is restored after G28.
  2139. #ifdef MESH_BED_LEVELING
  2140. uint8_t mbl_was_active = mbl.active;
  2141. mbl.active = 0;
  2142. current_position[Z_AXIS] = st_get_position_mm(Z_AXIS);
  2143. #endif
  2144. // Reset baby stepping to zero, if the babystepping has already been loaded before. The babystepsTodo value will be
  2145. // consumed during the first movements following this statement.
  2146. if (home_z)
  2147. babystep_undo();
  2148. saved_feedrate = feedrate;
  2149. int l_feedmultiply = feedmultiply;
  2150. feedmultiply = 100;
  2151. previous_millis_cmd = _millis();
  2152. enable_endstops(true);
  2153. memcpy(destination, current_position, sizeof(destination));
  2154. feedrate = 0.0;
  2155. #if Z_HOME_DIR > 0 // If homing away from BED do Z first
  2156. if(home_z)
  2157. homeaxis(Z_AXIS);
  2158. #endif
  2159. #ifdef QUICK_HOME
  2160. // In the quick mode, if both x and y are to be homed, a diagonal move will be performed initially.
  2161. if(home_x && home_y) //first diagonal move
  2162. {
  2163. current_position[X_AXIS] = 0;current_position[Y_AXIS] = 0;
  2164. int x_axis_home_dir = home_dir(X_AXIS);
  2165. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  2166. destination[X_AXIS] = 1.5 * max_length(X_AXIS) * x_axis_home_dir;destination[Y_AXIS] = 1.5 * max_length(Y_AXIS) * home_dir(Y_AXIS);
  2167. feedrate = homing_feedrate[X_AXIS];
  2168. if(homing_feedrate[Y_AXIS]<feedrate)
  2169. feedrate = homing_feedrate[Y_AXIS];
  2170. if (max_length(X_AXIS) > max_length(Y_AXIS)) {
  2171. feedrate *= sqrt(pow(max_length(Y_AXIS) / max_length(X_AXIS), 2) + 1);
  2172. } else {
  2173. feedrate *= sqrt(pow(max_length(X_AXIS) / max_length(Y_AXIS), 2) + 1);
  2174. }
  2175. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
  2176. st_synchronize();
  2177. axis_is_at_home(X_AXIS);
  2178. axis_is_at_home(Y_AXIS);
  2179. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  2180. destination[X_AXIS] = current_position[X_AXIS];
  2181. destination[Y_AXIS] = current_position[Y_AXIS];
  2182. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
  2183. feedrate = 0.0;
  2184. st_synchronize();
  2185. endstops_hit_on_purpose();
  2186. current_position[X_AXIS] = destination[X_AXIS];
  2187. current_position[Y_AXIS] = destination[Y_AXIS];
  2188. current_position[Z_AXIS] = destination[Z_AXIS];
  2189. }
  2190. #endif /* QUICK_HOME */
  2191. #ifdef TMC2130
  2192. if(home_x)
  2193. {
  2194. if (!calib)
  2195. homeaxis(X_AXIS);
  2196. else
  2197. tmc2130_home_calibrate(X_AXIS);
  2198. }
  2199. if(home_y)
  2200. {
  2201. if (!calib)
  2202. homeaxis(Y_AXIS);
  2203. else
  2204. tmc2130_home_calibrate(Y_AXIS);
  2205. }
  2206. #else //TMC2130
  2207. if(home_x) homeaxis(X_AXIS);
  2208. if(home_y) homeaxis(Y_AXIS);
  2209. #endif //TMC2130
  2210. if(home_x_axis && home_x_value != 0)
  2211. current_position[X_AXIS]=home_x_value+cs.add_homing[X_AXIS];
  2212. if(home_y_axis && home_y_value != 0)
  2213. current_position[Y_AXIS]=home_y_value+cs.add_homing[Y_AXIS];
  2214. #if Z_HOME_DIR < 0 // If homing towards BED do Z last
  2215. #ifndef Z_SAFE_HOMING
  2216. if(home_z) {
  2217. #if defined (Z_RAISE_BEFORE_HOMING) && (Z_RAISE_BEFORE_HOMING > 0)
  2218. destination[Z_AXIS] = Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS) * (-1); // Set destination away from bed
  2219. feedrate = max_feedrate[Z_AXIS];
  2220. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate, active_extruder);
  2221. st_synchronize();
  2222. #endif // defined (Z_RAISE_BEFORE_HOMING) && (Z_RAISE_BEFORE_HOMING > 0)
  2223. #if (defined(MESH_BED_LEVELING) && !defined(MK1BP)) // If Mesh bed leveling, move X&Y to safe position for home
  2224. if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] ))
  2225. {
  2226. homeaxis(X_AXIS);
  2227. homeaxis(Y_AXIS);
  2228. }
  2229. // 1st mesh bed leveling measurement point, corrected.
  2230. world2machine_initialize();
  2231. world2machine(pgm_read_float(bed_ref_points_4), pgm_read_float(bed_ref_points_4+1), destination[X_AXIS], destination[Y_AXIS]);
  2232. world2machine_reset();
  2233. if (destination[Y_AXIS] < Y_MIN_POS)
  2234. destination[Y_AXIS] = Y_MIN_POS;
  2235. destination[Z_AXIS] = MESH_HOME_Z_SEARCH; // Set destination away from bed
  2236. feedrate = homing_feedrate[Z_AXIS]/10;
  2237. current_position[Z_AXIS] = 0;
  2238. enable_endstops(false);
  2239. #ifdef DEBUG_BUILD
  2240. SERIAL_ECHOLNPGM("plan_set_position()");
  2241. MYSERIAL.println(current_position[X_AXIS]);MYSERIAL.println(current_position[Y_AXIS]);
  2242. MYSERIAL.println(current_position[Z_AXIS]);MYSERIAL.println(current_position[E_AXIS]);
  2243. #endif
  2244. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  2245. #ifdef DEBUG_BUILD
  2246. SERIAL_ECHOLNPGM("plan_buffer_line()");
  2247. MYSERIAL.println(destination[X_AXIS]);MYSERIAL.println(destination[Y_AXIS]);
  2248. MYSERIAL.println(destination[Z_AXIS]);MYSERIAL.println(destination[E_AXIS]);
  2249. MYSERIAL.println(feedrate);MYSERIAL.println(active_extruder);
  2250. #endif
  2251. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate, active_extruder);
  2252. st_synchronize();
  2253. current_position[X_AXIS] = destination[X_AXIS];
  2254. current_position[Y_AXIS] = destination[Y_AXIS];
  2255. enable_endstops(true);
  2256. endstops_hit_on_purpose();
  2257. homeaxis(Z_AXIS);
  2258. #else // MESH_BED_LEVELING
  2259. homeaxis(Z_AXIS);
  2260. #endif // MESH_BED_LEVELING
  2261. }
  2262. #else // defined(Z_SAFE_HOMING): Z Safe mode activated.
  2263. if(home_all_axes) {
  2264. destination[X_AXIS] = round(Z_SAFE_HOMING_X_POINT - X_PROBE_OFFSET_FROM_EXTRUDER);
  2265. destination[Y_AXIS] = round(Z_SAFE_HOMING_Y_POINT - Y_PROBE_OFFSET_FROM_EXTRUDER);
  2266. destination[Z_AXIS] = Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS) * (-1); // Set destination away from bed
  2267. feedrate = XY_TRAVEL_SPEED/60;
  2268. current_position[Z_AXIS] = 0;
  2269. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  2270. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate, active_extruder);
  2271. st_synchronize();
  2272. current_position[X_AXIS] = destination[X_AXIS];
  2273. current_position[Y_AXIS] = destination[Y_AXIS];
  2274. homeaxis(Z_AXIS);
  2275. }
  2276. // Let's see if X and Y are homed and probe is inside bed area.
  2277. if(home_z) {
  2278. if ( (axis_known_position[X_AXIS]) && (axis_known_position[Y_AXIS]) \
  2279. && (current_position[X_AXIS]+X_PROBE_OFFSET_FROM_EXTRUDER >= X_MIN_POS) \
  2280. && (current_position[X_AXIS]+X_PROBE_OFFSET_FROM_EXTRUDER <= X_MAX_POS) \
  2281. && (current_position[Y_AXIS]+Y_PROBE_OFFSET_FROM_EXTRUDER >= Y_MIN_POS) \
  2282. && (current_position[Y_AXIS]+Y_PROBE_OFFSET_FROM_EXTRUDER <= Y_MAX_POS)) {
  2283. current_position[Z_AXIS] = 0;
  2284. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  2285. destination[Z_AXIS] = Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS) * (-1); // Set destination away from bed
  2286. feedrate = max_feedrate[Z_AXIS];
  2287. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate, active_extruder);
  2288. st_synchronize();
  2289. homeaxis(Z_AXIS);
  2290. } else if (!((axis_known_position[X_AXIS]) && (axis_known_position[Y_AXIS]))) {
  2291. LCD_MESSAGERPGM(MSG_POSITION_UNKNOWN);
  2292. SERIAL_ECHO_START;
  2293. SERIAL_ECHOLNRPGM(MSG_POSITION_UNKNOWN);
  2294. } else {
  2295. LCD_MESSAGERPGM(MSG_ZPROBE_OUT);
  2296. SERIAL_ECHO_START;
  2297. SERIAL_ECHOLNRPGM(MSG_ZPROBE_OUT);
  2298. }
  2299. }
  2300. #endif // Z_SAFE_HOMING
  2301. #endif // Z_HOME_DIR < 0
  2302. if(home_z_axis && home_z_value != 0)
  2303. current_position[Z_AXIS]=home_z_value+cs.add_homing[Z_AXIS];
  2304. #ifdef ENABLE_AUTO_BED_LEVELING
  2305. if(home_z)
  2306. current_position[Z_AXIS] += cs.zprobe_zoffset; //Add Z_Probe offset (the distance is negative)
  2307. #endif
  2308. // Set the planner and stepper routine positions.
  2309. // At this point the mesh bed leveling and world2machine corrections are disabled and current_position
  2310. // contains the machine coordinates.
  2311. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  2312. #ifdef ENDSTOPS_ONLY_FOR_HOMING
  2313. enable_endstops(false);
  2314. #endif
  2315. feedrate = saved_feedrate;
  2316. feedmultiply = l_feedmultiply;
  2317. previous_millis_cmd = _millis();
  2318. endstops_hit_on_purpose();
  2319. #ifndef MESH_BED_LEVELING
  2320. // If MESH_BED_LEVELING is not active, then it is the original Prusa i3.
  2321. // Offer the user to load the baby step value, which has been adjusted at the previous print session.
  2322. if(card.sdprinting && eeprom_read_word((uint16_t *)EEPROM_BABYSTEP_Z))
  2323. lcd_adjust_z();
  2324. #endif
  2325. // Load the machine correction matrix
  2326. world2machine_initialize();
  2327. // and correct the current_position XY axes to match the transformed coordinate system.
  2328. world2machine_update_current();
  2329. #if (defined(MESH_BED_LEVELING) && !defined(MK1BP))
  2330. if (home_x_axis || home_y_axis || without_mbl || home_z_axis)
  2331. {
  2332. if (! home_z && mbl_was_active) {
  2333. // Re-enable the mesh bed leveling if only the X and Y axes were re-homed.
  2334. mbl.active = true;
  2335. // and re-adjust the current logical Z axis with the bed leveling offset applicable at the current XY position.
  2336. current_position[Z_AXIS] -= mbl.get_z(st_get_position_mm(X_AXIS), st_get_position_mm(Y_AXIS));
  2337. }
  2338. }
  2339. else
  2340. {
  2341. st_synchronize();
  2342. homing_flag = false;
  2343. }
  2344. #endif
  2345. if (farm_mode) { prusa_statistics(20); };
  2346. homing_flag = false;
  2347. #if 0
  2348. SERIAL_ECHOPGM("G28, final "); print_world_coordinates();
  2349. SERIAL_ECHOPGM("G28, final "); print_physical_coordinates();
  2350. SERIAL_ECHOPGM("G28, final "); print_mesh_bed_leveling_table();
  2351. #endif
  2352. }
  2353. static void gcode_G28(bool home_x_axis, bool home_y_axis, bool home_z_axis)
  2354. {
  2355. #ifdef TMC2130
  2356. gcode_G28(home_x_axis, 0, home_y_axis, 0, home_z_axis, 0, false, true);
  2357. #else
  2358. gcode_G28(home_x_axis, 0, home_y_axis, 0, home_z_axis, 0, true);
  2359. #endif //TMC2130
  2360. }
  2361. void adjust_bed_reset()
  2362. {
  2363. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID, 1);
  2364. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_LEFT, 0);
  2365. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_RIGHT, 0);
  2366. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_FRONT, 0);
  2367. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_REAR, 0);
  2368. }
  2369. //! @brief Calibrate XYZ
  2370. //! @param onlyZ if true, calibrate only Z axis
  2371. //! @param verbosity_level
  2372. //! @retval true Succeeded
  2373. //! @retval false Failed
  2374. bool gcode_M45(bool onlyZ, int8_t verbosity_level)
  2375. {
  2376. bool final_result = false;
  2377. #ifdef TMC2130
  2378. FORCE_HIGH_POWER_START;
  2379. #endif // TMC2130
  2380. // Only Z calibration?
  2381. if (!onlyZ)
  2382. {
  2383. setTargetBed(0);
  2384. setAllTargetHotends(0);
  2385. adjust_bed_reset(); //reset bed level correction
  2386. }
  2387. // Disable the default update procedure of the display. We will do a modal dialog.
  2388. lcd_update_enable(false);
  2389. // Let the planner use the uncorrected coordinates.
  2390. mbl.reset();
  2391. // Reset world2machine_rotation_and_skew and world2machine_shift, therefore
  2392. // the planner will not perform any adjustments in the XY plane.
  2393. // Wait for the motors to stop and update the current position with the absolute values.
  2394. world2machine_revert_to_uncorrected();
  2395. // Reset the baby step value applied without moving the axes.
  2396. babystep_reset();
  2397. // Mark all axes as in a need for homing.
  2398. memset(axis_known_position, 0, sizeof(axis_known_position));
  2399. // Home in the XY plane.
  2400. //set_destination_to_current();
  2401. int l_feedmultiply = setup_for_endstop_move();
  2402. lcd_display_message_fullscreen_P(_T(MSG_AUTO_HOME));
  2403. home_xy();
  2404. enable_endstops(false);
  2405. current_position[X_AXIS] += 5;
  2406. current_position[Y_AXIS] += 5;
  2407. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[Z_AXIS] / 40, active_extruder);
  2408. st_synchronize();
  2409. // Let the user move the Z axes up to the end stoppers.
  2410. #ifdef TMC2130
  2411. if (calibrate_z_auto())
  2412. {
  2413. #else //TMC2130
  2414. if (lcd_calibrate_z_end_stop_manual(onlyZ))
  2415. {
  2416. #endif //TMC2130
  2417. lcd_show_fullscreen_message_and_wait_P(_T(MSG_CONFIRM_NOZZLE_CLEAN));
  2418. if(onlyZ){
  2419. lcd_display_message_fullscreen_P(_T(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1));
  2420. lcd_set_cursor(0, 3);
  2421. lcd_print(1);
  2422. lcd_puts_P(_T(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2));
  2423. }else{
  2424. //lcd_show_fullscreen_message_and_wait_P(_T(MSG_PAPER));
  2425. lcd_display_message_fullscreen_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE1));
  2426. lcd_set_cursor(0, 2);
  2427. lcd_print(1);
  2428. lcd_puts_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2));
  2429. }
  2430. refresh_cmd_timeout();
  2431. #ifndef STEEL_SHEET
  2432. if (((degHotend(0) > MAX_HOTEND_TEMP_CALIBRATION) || (degBed() > MAX_BED_TEMP_CALIBRATION)) && (!onlyZ))
  2433. {
  2434. lcd_wait_for_cool_down();
  2435. }
  2436. #endif //STEEL_SHEET
  2437. if(!onlyZ)
  2438. {
  2439. KEEPALIVE_STATE(PAUSED_FOR_USER);
  2440. #ifdef STEEL_SHEET
  2441. bool result = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_STEEL_SHEET_CHECK), false, false);
  2442. if(result) lcd_show_fullscreen_message_and_wait_P(_T(MSG_REMOVE_STEEL_SHEET));
  2443. #endif //STEEL_SHEET
  2444. lcd_show_fullscreen_message_and_wait_P(_T(MSG_PAPER));
  2445. KEEPALIVE_STATE(IN_HANDLER);
  2446. lcd_display_message_fullscreen_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE1));
  2447. lcd_set_cursor(0, 2);
  2448. lcd_print(1);
  2449. lcd_puts_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2));
  2450. }
  2451. bool endstops_enabled = enable_endstops(false);
  2452. current_position[Z_AXIS] -= 1; //move 1mm down with disabled endstop
  2453. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[Z_AXIS] / 40, active_extruder);
  2454. st_synchronize();
  2455. // Move the print head close to the bed.
  2456. current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
  2457. enable_endstops(true);
  2458. #ifdef TMC2130
  2459. tmc2130_home_enter(Z_AXIS_MASK);
  2460. #endif //TMC2130
  2461. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[Z_AXIS] / 40, active_extruder);
  2462. st_synchronize();
  2463. #ifdef TMC2130
  2464. tmc2130_home_exit();
  2465. #endif //TMC2130
  2466. enable_endstops(endstops_enabled);
  2467. if (st_get_position_mm(Z_AXIS) == MESH_HOME_Z_SEARCH)
  2468. {
  2469. if (onlyZ)
  2470. {
  2471. clean_up_after_endstop_move(l_feedmultiply);
  2472. // Z only calibration.
  2473. // Load the machine correction matrix
  2474. world2machine_initialize();
  2475. // and correct the current_position to match the transformed coordinate system.
  2476. world2machine_update_current();
  2477. //FIXME
  2478. bool result = sample_mesh_and_store_reference();
  2479. if (result)
  2480. {
  2481. if (calibration_status() == CALIBRATION_STATUS_Z_CALIBRATION)
  2482. // Shipped, the nozzle height has been set already. The user can start printing now.
  2483. calibration_status_store(CALIBRATION_STATUS_CALIBRATED);
  2484. final_result = true;
  2485. // babystep_apply();
  2486. }
  2487. }
  2488. else
  2489. {
  2490. // Reset the baby step value and the baby step applied flag.
  2491. calibration_status_store(CALIBRATION_STATUS_XYZ_CALIBRATION);
  2492. eeprom_update_word((uint16_t*)EEPROM_BABYSTEP_Z, 0);
  2493. // Complete XYZ calibration.
  2494. uint8_t point_too_far_mask = 0;
  2495. BedSkewOffsetDetectionResultType result = find_bed_offset_and_skew(verbosity_level, point_too_far_mask);
  2496. clean_up_after_endstop_move(l_feedmultiply);
  2497. // Print head up.
  2498. current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
  2499. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[Z_AXIS] / 40, active_extruder);
  2500. st_synchronize();
  2501. //#ifndef NEW_XYZCAL
  2502. if (result >= 0)
  2503. {
  2504. #ifdef HEATBED_V2
  2505. sample_z();
  2506. #else //HEATBED_V2
  2507. point_too_far_mask = 0;
  2508. // Second half: The fine adjustment.
  2509. // Let the planner use the uncorrected coordinates.
  2510. mbl.reset();
  2511. world2machine_reset();
  2512. // Home in the XY plane.
  2513. int l_feedmultiply = setup_for_endstop_move();
  2514. home_xy();
  2515. result = improve_bed_offset_and_skew(1, verbosity_level, point_too_far_mask);
  2516. clean_up_after_endstop_move(l_feedmultiply);
  2517. // Print head up.
  2518. current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
  2519. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[Z_AXIS] / 40, active_extruder);
  2520. st_synchronize();
  2521. // if (result >= 0) babystep_apply();
  2522. #endif //HEATBED_V2
  2523. }
  2524. //#endif //NEW_XYZCAL
  2525. lcd_update_enable(true);
  2526. lcd_update(2);
  2527. lcd_bed_calibration_show_result(result, point_too_far_mask);
  2528. if (result >= 0)
  2529. {
  2530. // Calibration valid, the machine should be able to print. Advise the user to run the V2Calibration.gcode.
  2531. calibration_status_store(CALIBRATION_STATUS_LIVE_ADJUST);
  2532. if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) != 1) lcd_show_fullscreen_message_and_wait_P(_T(MSG_BABYSTEP_Z_NOT_SET));
  2533. final_result = true;
  2534. }
  2535. }
  2536. #ifdef TMC2130
  2537. tmc2130_home_exit();
  2538. #endif
  2539. }
  2540. else
  2541. {
  2542. lcd_show_fullscreen_message_and_wait_P(PSTR("Calibration failed! Check the axes and run again."));
  2543. final_result = false;
  2544. }
  2545. }
  2546. else
  2547. {
  2548. // Timeouted.
  2549. }
  2550. lcd_update_enable(true);
  2551. #ifdef TMC2130
  2552. FORCE_HIGH_POWER_END;
  2553. #endif // TMC2130
  2554. return final_result;
  2555. }
  2556. void gcode_M114()
  2557. {
  2558. SERIAL_PROTOCOLPGM("X:");
  2559. SERIAL_PROTOCOL(current_position[X_AXIS]);
  2560. SERIAL_PROTOCOLPGM(" Y:");
  2561. SERIAL_PROTOCOL(current_position[Y_AXIS]);
  2562. SERIAL_PROTOCOLPGM(" Z:");
  2563. SERIAL_PROTOCOL(current_position[Z_AXIS]);
  2564. SERIAL_PROTOCOLPGM(" E:");
  2565. SERIAL_PROTOCOL(current_position[E_AXIS]);
  2566. SERIAL_PROTOCOLRPGM(_n(" Count X: "));////MSG_COUNT_X
  2567. SERIAL_PROTOCOL(float(st_get_position(X_AXIS)) / cs.axis_steps_per_unit[X_AXIS]);
  2568. SERIAL_PROTOCOLPGM(" Y:");
  2569. SERIAL_PROTOCOL(float(st_get_position(Y_AXIS)) / cs.axis_steps_per_unit[Y_AXIS]);
  2570. SERIAL_PROTOCOLPGM(" Z:");
  2571. SERIAL_PROTOCOL(float(st_get_position(Z_AXIS)) / cs.axis_steps_per_unit[Z_AXIS]);
  2572. SERIAL_PROTOCOLPGM(" E:");
  2573. SERIAL_PROTOCOL(float(st_get_position(E_AXIS)) / cs.axis_steps_per_unit[E_AXIS]);
  2574. SERIAL_PROTOCOLLN("");
  2575. }
  2576. static void gcode_M600(bool automatic, float x_position, float y_position, float z_shift, float e_shift, float /*e_shift_late*/)
  2577. {
  2578. st_synchronize();
  2579. float lastpos[4];
  2580. if (farm_mode)
  2581. {
  2582. prusa_statistics(22);
  2583. }
  2584. //First backup current position and settings
  2585. int feedmultiplyBckp = feedmultiply;
  2586. float HotendTempBckp = degTargetHotend(active_extruder);
  2587. int fanSpeedBckp = fanSpeed;
  2588. lastpos[X_AXIS] = current_position[X_AXIS];
  2589. lastpos[Y_AXIS] = current_position[Y_AXIS];
  2590. lastpos[Z_AXIS] = current_position[Z_AXIS];
  2591. lastpos[E_AXIS] = current_position[E_AXIS];
  2592. //Retract E
  2593. current_position[E_AXIS] += e_shift;
  2594. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS],
  2595. current_position[E_AXIS], FILAMENTCHANGE_RFEED, active_extruder);
  2596. st_synchronize();
  2597. //Lift Z
  2598. current_position[Z_AXIS] += z_shift;
  2599. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS],
  2600. current_position[E_AXIS], FILAMENTCHANGE_ZFEED, active_extruder);
  2601. st_synchronize();
  2602. //Move XY to side
  2603. current_position[X_AXIS] = x_position;
  2604. current_position[Y_AXIS] = y_position;
  2605. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS],
  2606. current_position[E_AXIS], FILAMENTCHANGE_XYFEED, active_extruder);
  2607. st_synchronize();
  2608. //Beep, manage nozzle heater and wait for user to start unload filament
  2609. if(!mmu_enabled) M600_wait_for_user(HotendTempBckp);
  2610. lcd_change_fil_state = 0;
  2611. // Unload filament
  2612. if (mmu_enabled) extr_unload(); //unload just current filament for multimaterial printers (used also in M702)
  2613. else unload_filament(); //unload filament for single material (used also in M702)
  2614. //finish moves
  2615. st_synchronize();
  2616. if (!mmu_enabled)
  2617. {
  2618. KEEPALIVE_STATE(PAUSED_FOR_USER);
  2619. lcd_change_fil_state = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Was filament unload successful?"),
  2620. false, true); ////MSG_UNLOAD_SUCCESSFUL c=20 r=2
  2621. if (lcd_change_fil_state == 0)
  2622. {
  2623. lcd_clear();
  2624. lcd_set_cursor(0, 2);
  2625. lcd_puts_P(_T(MSG_PLEASE_WAIT));
  2626. current_position[X_AXIS] -= 100;
  2627. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS],
  2628. current_position[E_AXIS], FILAMENTCHANGE_XYFEED, active_extruder);
  2629. st_synchronize();
  2630. lcd_show_fullscreen_message_and_wait_P(_i("Please open idler and remove filament manually."));////MSG_CHECK_IDLER c=20 r=4
  2631. }
  2632. }
  2633. if (mmu_enabled)
  2634. {
  2635. if (!automatic) {
  2636. if (saved_printing) mmu_eject_filament(mmu_extruder, false); //if M600 was invoked by filament senzor (FINDA) eject filament so user can easily remove it
  2637. mmu_M600_wait_and_beep();
  2638. if (saved_printing) {
  2639. lcd_clear();
  2640. lcd_set_cursor(0, 2);
  2641. lcd_puts_P(_T(MSG_PLEASE_WAIT));
  2642. mmu_command(MmuCmd::R0);
  2643. manage_response(false, false);
  2644. }
  2645. }
  2646. mmu_M600_load_filament(automatic, HotendTempBckp);
  2647. }
  2648. else
  2649. M600_load_filament();
  2650. if (!automatic) M600_check_state(HotendTempBckp);
  2651. lcd_update_enable(true);
  2652. //Not let's go back to print
  2653. fanSpeed = fanSpeedBckp;
  2654. //Feed a little of filament to stabilize pressure
  2655. if (!automatic)
  2656. {
  2657. current_position[E_AXIS] += FILAMENTCHANGE_RECFEED;
  2658. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS],
  2659. current_position[E_AXIS], FILAMENTCHANGE_EXFEED, active_extruder);
  2660. }
  2661. //Move XY back
  2662. plan_buffer_line(lastpos[X_AXIS], lastpos[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS],
  2663. FILAMENTCHANGE_XYFEED, active_extruder);
  2664. st_synchronize();
  2665. //Move Z back
  2666. plan_buffer_line(lastpos[X_AXIS], lastpos[Y_AXIS], lastpos[Z_AXIS], current_position[E_AXIS],
  2667. FILAMENTCHANGE_ZFEED, active_extruder);
  2668. st_synchronize();
  2669. //Set E position to original
  2670. plan_set_e_position(lastpos[E_AXIS]);
  2671. memcpy(current_position, lastpos, sizeof(lastpos));
  2672. memcpy(destination, current_position, sizeof(current_position));
  2673. //Recover feed rate
  2674. feedmultiply = feedmultiplyBckp;
  2675. char cmd[9];
  2676. sprintf_P(cmd, PSTR("M220 S%i"), feedmultiplyBckp);
  2677. enquecommand(cmd);
  2678. #ifdef IR_SENSOR
  2679. //this will set fsensor_watch_autoload to correct value and prevent possible M701 gcode enqueuing when M600 is finished
  2680. fsensor_check_autoload();
  2681. #endif //IR_SENSOR
  2682. lcd_setstatuspgm(_T(WELCOME_MSG));
  2683. custom_message_type = CUSTOM_MSG_TYPE_STATUS;
  2684. }
  2685. //! @brief Rise Z if too low to avoid blob/jam before filament loading
  2686. //!
  2687. //! It doesn't plan_buffer_line(), as it expects plan_buffer_line() to be called after
  2688. //! during extruding (loading) filament.
  2689. void marlin_rise_z(void)
  2690. {
  2691. if (current_position[Z_AXIS] < 20) current_position[Z_AXIS] += 30;
  2692. }
  2693. void gcode_M701()
  2694. {
  2695. printf_P(PSTR("gcode_M701 begin\n"));
  2696. if (mmu_enabled)
  2697. {
  2698. extr_adj(tmp_extruder);//loads current extruder
  2699. mmu_extruder = tmp_extruder;
  2700. }
  2701. else
  2702. {
  2703. enable_z();
  2704. custom_message_type = CUSTOM_MSG_TYPE_F_LOAD;
  2705. #ifdef FSENSOR_QUALITY
  2706. fsensor_oq_meassure_start(40);
  2707. #endif //FSENSOR_QUALITY
  2708. lcd_setstatuspgm(_T(MSG_LOADING_FILAMENT));
  2709. current_position[E_AXIS] += 40;
  2710. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 400 / 60, active_extruder); //fast sequence
  2711. st_synchronize();
  2712. marlin_rise_z();
  2713. current_position[E_AXIS] += 30;
  2714. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 400 / 60, active_extruder); //fast sequence
  2715. load_filament_final_feed(); //slow sequence
  2716. st_synchronize();
  2717. if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE)) _tone(BEEPER, 500);
  2718. delay_keep_alive(50);
  2719. _noTone(BEEPER);
  2720. if (!farm_mode && loading_flag) {
  2721. lcd_load_filament_color_check();
  2722. }
  2723. lcd_update_enable(true);
  2724. lcd_update(2);
  2725. lcd_setstatuspgm(_T(WELCOME_MSG));
  2726. disable_z();
  2727. loading_flag = false;
  2728. custom_message_type = CUSTOM_MSG_TYPE_STATUS;
  2729. #ifdef FSENSOR_QUALITY
  2730. fsensor_oq_meassure_stop();
  2731. if (!fsensor_oq_result())
  2732. {
  2733. bool disable = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Fil. sensor response is poor, disable it?"), false, true);
  2734. lcd_update_enable(true);
  2735. lcd_update(2);
  2736. if (disable)
  2737. fsensor_disable();
  2738. }
  2739. #endif //FSENSOR_QUALITY
  2740. }
  2741. }
  2742. /**
  2743. * @brief Get serial number from 32U2 processor
  2744. *
  2745. * Typical format of S/N is:CZPX0917X003XC13518
  2746. *
  2747. * Command operates only in farm mode, if not in farm mode, "Not in farm mode." is written to MYSERIAL.
  2748. *
  2749. * Send command ;S to serial port 0 to retrieve serial number stored in 32U2 processor,
  2750. * reply is transmitted to serial port 1 character by character.
  2751. * Operation takes typically 23 ms. If the retransmit is not finished until 100 ms,
  2752. * it is interrupted, so less, or no characters are retransmitted, only newline character is send
  2753. * in any case.
  2754. */
  2755. static void gcode_PRUSA_SN()
  2756. {
  2757. if (farm_mode) {
  2758. selectedSerialPort = 0;
  2759. putchar(';');
  2760. putchar('S');
  2761. int numbersRead = 0;
  2762. ShortTimer timeout;
  2763. timeout.start();
  2764. while (numbersRead < 19) {
  2765. while (MSerial.available() > 0) {
  2766. uint8_t serial_char = MSerial.read();
  2767. selectedSerialPort = 1;
  2768. putchar(serial_char);
  2769. numbersRead++;
  2770. selectedSerialPort = 0;
  2771. }
  2772. if (timeout.expired(100u)) break;
  2773. }
  2774. selectedSerialPort = 1;
  2775. putchar('\n');
  2776. #if 0
  2777. for (int b = 0; b < 3; b++) {
  2778. _tone(BEEPER, 110);
  2779. _delay(50);
  2780. _noTone(BEEPER);
  2781. _delay(50);
  2782. }
  2783. #endif
  2784. } else {
  2785. puts_P(_N("Not in farm mode."));
  2786. }
  2787. }
  2788. #ifdef BACKLASH_X
  2789. extern uint8_t st_backlash_x;
  2790. #endif //BACKLASH_X
  2791. #ifdef BACKLASH_Y
  2792. extern uint8_t st_backlash_y;
  2793. #endif //BACKLASH_Y
  2794. //! @brief Parse and process commands
  2795. //!
  2796. //! look here for descriptions of G-codes: http://linuxcnc.org/handbook/gcode/g-code.html
  2797. //! http://objects.reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes
  2798. //!
  2799. //! Implemented Codes
  2800. //! -------------------
  2801. //!
  2802. //!@n PRUSA CODES
  2803. //!@n P F - Returns FW versions
  2804. //!@n P R - Returns revision of printer
  2805. //!
  2806. //!@n G0 -> G1
  2807. //!@n G1 - Coordinated Movement X Y Z E
  2808. //!@n G2 - CW ARC
  2809. //!@n G3 - CCW ARC
  2810. //!@n G4 - Dwell S<seconds> or P<milliseconds>
  2811. //!@n G10 - retract filament according to settings of M207
  2812. //!@n G11 - retract recover filament according to settings of M208
  2813. //!@n G28 - Home all Axis
  2814. //!@n G29 - Detailed Z-Probe, probes the bed at 3 or more points. Will fail if you haven't homed yet.
  2815. //!@n G30 - Single Z Probe, probes bed at current XY location.
  2816. //!@n G31 - Dock sled (Z_PROBE_SLED only)
  2817. //!@n G32 - Undock sled (Z_PROBE_SLED only)
  2818. //!@n G80 - Automatic mesh bed leveling
  2819. //!@n G81 - Print bed profile
  2820. //!@n G90 - Use Absolute Coordinates
  2821. //!@n G91 - Use Relative Coordinates
  2822. //!@n G92 - Set current position to coordinates given
  2823. //!
  2824. //!@n M Codes
  2825. //!@n M0 - Unconditional stop - Wait for user to press a button on the LCD
  2826. //!@n M1 - Same as M0
  2827. //!@n M17 - Enable/Power all stepper motors
  2828. //!@n M18 - Disable all stepper motors; same as M84
  2829. //!@n M20 - List SD card
  2830. //!@n M21 - Init SD card
  2831. //!@n M22 - Release SD card
  2832. //!@n M23 - Select SD file (M23 filename.g)
  2833. //!@n M24 - Start/resume SD print
  2834. //!@n M25 - Pause SD print
  2835. //!@n M26 - Set SD position in bytes (M26 S12345)
  2836. //!@n M27 - Report SD print status
  2837. //!@n M28 - Start SD write (M28 filename.g)
  2838. //!@n M29 - Stop SD write
  2839. //!@n M30 - Delete file from SD (M30 filename.g)
  2840. //!@n M31 - Output time since last M109 or SD card start to serial
  2841. //!@n M32 - Select file and start SD print (Can be used _while_ printing from SD card files):
  2842. //! syntax "M32 /path/filename#", or "M32 S<startpos bytes> !filename#"
  2843. //! Call gcode file : "M32 P !filename#" and return to caller file after finishing (similar to #include).
  2844. //! The '#' is necessary when calling from within sd files, as it stops buffer prereading
  2845. //!@n M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used.
  2846. //!@n M73 - Show percent done and print time remaining
  2847. //!@n M80 - Turn on Power Supply
  2848. //!@n M81 - Turn off Power Supply
  2849. //!@n M82 - Set E codes absolute (default)
  2850. //!@n M83 - Set E codes relative while in Absolute Coordinates (G90) mode
  2851. //!@n M84 - Disable steppers until next move,
  2852. //! or use S<seconds> to specify an inactivity timeout, after which the steppers will be disabled. S0 to disable the timeout.
  2853. //!@n M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)
  2854. //!@n M86 - Set safety timer expiration time with parameter S<seconds>; M86 S0 will disable safety timer
  2855. //!@n M92 - Set axis_steps_per_unit - same syntax as G92
  2856. //!@n M104 - Set extruder target temp
  2857. //!@n M105 - Read current temp
  2858. //!@n M106 - Fan on
  2859. //!@n M107 - Fan off
  2860. //!@n M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating
  2861. //! Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling
  2862. //! IF AUTOTEMP is enabled, S<mintemp> B<maxtemp> F<factor>. Exit autotemp by any M109 without F
  2863. //!@n M112 - Emergency stop
  2864. //!@n M113 - Get or set the timeout interval for Host Keepalive "busy" messages
  2865. //!@n M114 - Output current position to serial port
  2866. //!@n M115 - Capabilities string
  2867. //!@n M117 - display message
  2868. //!@n M119 - Output Endstop status to serial port
  2869. //!@n M126 - Solenoid Air Valve Open (BariCUDA support by jmil)
  2870. //!@n M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil)
  2871. //!@n M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil)
  2872. //!@n M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil)
  2873. //!@n M140 - Set bed target temp
  2874. //!@n M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work.
  2875. //!@n M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating
  2876. //! Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
  2877. //!@n M200 D<millimeters>- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).
  2878. //!@n M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
  2879. //!@n M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!!
  2880. //!@n M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec
  2881. //!@n M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) in mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer under-runs and M20 minimum feedrate
  2882. //!@n M205 - advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk, E=maximum E jerk
  2883. //!@n M206 - set additional homing offset
  2884. //!@n M207 - set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop], stays in mm regardless of M200 setting
  2885. //!@n M208 - set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/sec]
  2886. //!@n M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction.
  2887. //!@n M218 - set hotend offset (in mm): T<extruder_number> X<offset_on_X> Y<offset_on_Y>
  2888. //!@n M220 S<factor in percent>- set speed factor override percentage
  2889. //!@n M221 S<factor in percent>- set extrude factor override percentage
  2890. //!@n M226 P<pin number> S<pin state>- Wait until the specified pin reaches the state required
  2891. //!@n M240 - Trigger a camera to take a photograph
  2892. //!@n M250 - Set LCD contrast C<contrast value> (value 0..63)
  2893. //!@n M280 - set servo position absolute. P: servo index, S: angle or microseconds
  2894. //!@n M300 - Play beep sound S<frequency Hz> P<duration ms>
  2895. //!@n M301 - Set PID parameters P I and D
  2896. //!@n M302 - Allow cold extrudes, or set the minimum extrude S<temperature>.
  2897. //!@n M303 - PID relay autotune S<temperature> sets the target temperature. (default target temperature = 150C)
  2898. //!@n M304 - Set bed PID parameters P I and D
  2899. //!@n M400 - Finish all moves
  2900. //!@n M401 - Lower z-probe if present
  2901. //!@n M402 - Raise z-probe if present
  2902. //!@n M404 - N<dia in mm> Enter the nominal filament width (3mm, 1.75mm ) or will display nominal filament width without parameters
  2903. //!@n M405 - Turn on Filament Sensor extrusion control. Optional D<delay in cm> to set delay in centimeters between sensor and extruder
  2904. //!@n M406 - Turn off Filament Sensor extrusion control
  2905. //!@n M407 - Displays measured filament diameter
  2906. //!@n M500 - stores parameters in EEPROM
  2907. //!@n M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
  2908. //!@n M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
  2909. //!@n M503 - print the current settings (from memory not from EEPROM)
  2910. //!@n M509 - force language selection on next restart
  2911. //!@n M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
  2912. //!@n M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
  2913. //!@n M605 - Set dual x-carriage movement mode: S<mode> [ X<duplication x-offset> R<duplication temp offset> ]
  2914. //!@n M860 - Wait for PINDA thermistor to reach target temperature.
  2915. //!@n M861 - Set / Read PINDA temperature compensation offsets
  2916. //!@n M900 - Set LIN_ADVANCE options, if enabled. See Configuration_adv.h for details.
  2917. //!@n M907 - Set digital trimpot motor current using axis codes.
  2918. //!@n M908 - Control digital trimpot directly.
  2919. //!@n M350 - Set microstepping mode.
  2920. //!@n M351 - Toggle MS1 MS2 pins directly.
  2921. //!
  2922. //!@n M928 - Start SD logging (M928 filename.g) - ended by M29
  2923. //!@n M999 - Restart after being stopped by error
  2924. void process_commands()
  2925. {
  2926. #ifdef FANCHECK
  2927. if (fan_check_error){
  2928. fan_check_error = false;
  2929. lcd_pause_print();
  2930. return;
  2931. }
  2932. #endif
  2933. if (!buflen) return; //empty command
  2934. #ifdef FILAMENT_RUNOUT_SUPPORT
  2935. SET_INPUT(FR_SENS);
  2936. #endif
  2937. #ifdef CMDBUFFER_DEBUG
  2938. SERIAL_ECHOPGM("Processing a GCODE command: ");
  2939. SERIAL_ECHO(cmdbuffer+bufindr+CMDHDRSIZE);
  2940. SERIAL_ECHOLNPGM("");
  2941. SERIAL_ECHOPGM("In cmdqueue: ");
  2942. SERIAL_ECHO(buflen);
  2943. SERIAL_ECHOLNPGM("");
  2944. #endif /* CMDBUFFER_DEBUG */
  2945. unsigned long codenum; //throw away variable
  2946. char *starpos = NULL;
  2947. #ifdef ENABLE_AUTO_BED_LEVELING
  2948. float x_tmp, y_tmp, z_tmp, real_z;
  2949. #endif
  2950. // PRUSA GCODES
  2951. KEEPALIVE_STATE(IN_HANDLER);
  2952. #ifdef SNMM
  2953. float tmp_motor[3] = DEFAULT_PWM_MOTOR_CURRENT;
  2954. float tmp_motor_loud[3] = DEFAULT_PWM_MOTOR_CURRENT_LOUD;
  2955. int8_t SilentMode;
  2956. #endif
  2957. if (code_seen("M117")) { //moved to highest priority place to be able to to print strings which includes "G", "PRUSA" and "^"
  2958. starpos = (strchr(strchr_pointer + 5, '*'));
  2959. if (starpos != NULL)
  2960. *(starpos) = '\0';
  2961. lcd_setstatus(strchr_pointer + 5);
  2962. }
  2963. #ifdef TMC2130
  2964. else if (strncmp_P(CMDBUFFER_CURRENT_STRING, PSTR("CRASH_"), 6) == 0)
  2965. {
  2966. if(code_seen("CRASH_DETECTED")) //! CRASH_DETECTED
  2967. {
  2968. uint8_t mask = 0;
  2969. if (code_seen('X')) mask |= X_AXIS_MASK;
  2970. if (code_seen('Y')) mask |= Y_AXIS_MASK;
  2971. crashdet_detected(mask);
  2972. }
  2973. else if(code_seen("CRASH_RECOVER")) //! CRASH_RECOVER
  2974. crashdet_recover();
  2975. else if(code_seen("CRASH_CANCEL")) //! CRASH_CANCEL
  2976. crashdet_cancel();
  2977. }
  2978. else if (strncmp_P(CMDBUFFER_CURRENT_STRING, PSTR("TMC_"), 4) == 0)
  2979. {
  2980. if (strncmp_P(CMDBUFFER_CURRENT_STRING + 4, PSTR("SET_WAVE_"), 9) == 0) //! TMC_SET_WAVE_
  2981. {
  2982. uint8_t axis = *(CMDBUFFER_CURRENT_STRING + 13);
  2983. axis = (axis == 'E')?3:(axis - 'X');
  2984. if (axis < 4)
  2985. {
  2986. uint8_t fac = (uint8_t)strtol(CMDBUFFER_CURRENT_STRING + 14, NULL, 10);
  2987. tmc2130_set_wave(axis, 247, fac);
  2988. }
  2989. }
  2990. else if (strncmp_P(CMDBUFFER_CURRENT_STRING + 4, PSTR("SET_STEP_"), 9) == 0) //! TMC_SET_STEP_
  2991. {
  2992. uint8_t axis = *(CMDBUFFER_CURRENT_STRING + 13);
  2993. axis = (axis == 'E')?3:(axis - 'X');
  2994. if (axis < 4)
  2995. {
  2996. uint8_t step = (uint8_t)strtol(CMDBUFFER_CURRENT_STRING + 14, NULL, 10);
  2997. uint16_t res = tmc2130_get_res(axis);
  2998. tmc2130_goto_step(axis, step & (4*res - 1), 2, 1000, res);
  2999. }
  3000. }
  3001. else if (strncmp_P(CMDBUFFER_CURRENT_STRING + 4, PSTR("SET_CHOP_"), 9) == 0) //! TMC_SET_CHOP_
  3002. {
  3003. uint8_t axis = *(CMDBUFFER_CURRENT_STRING + 13);
  3004. axis = (axis == 'E')?3:(axis - 'X');
  3005. if (axis < 4)
  3006. {
  3007. uint8_t chop0 = tmc2130_chopper_config[axis].toff;
  3008. uint8_t chop1 = tmc2130_chopper_config[axis].hstr;
  3009. uint8_t chop2 = tmc2130_chopper_config[axis].hend;
  3010. uint8_t chop3 = tmc2130_chopper_config[axis].tbl;
  3011. char* str_end = 0;
  3012. if (CMDBUFFER_CURRENT_STRING[14])
  3013. {
  3014. chop0 = (uint8_t)strtol(CMDBUFFER_CURRENT_STRING + 14, &str_end, 10) & 15;
  3015. if (str_end && *str_end)
  3016. {
  3017. chop1 = (uint8_t)strtol(str_end, &str_end, 10) & 7;
  3018. if (str_end && *str_end)
  3019. {
  3020. chop2 = (uint8_t)strtol(str_end, &str_end, 10) & 15;
  3021. if (str_end && *str_end)
  3022. chop3 = (uint8_t)strtol(str_end, &str_end, 10) & 3;
  3023. }
  3024. }
  3025. }
  3026. tmc2130_chopper_config[axis].toff = chop0;
  3027. tmc2130_chopper_config[axis].hstr = chop1 & 7;
  3028. tmc2130_chopper_config[axis].hend = chop2 & 15;
  3029. tmc2130_chopper_config[axis].tbl = chop3 & 3;
  3030. tmc2130_setup_chopper(axis, tmc2130_mres[axis], tmc2130_current_h[axis], tmc2130_current_r[axis]);
  3031. //printf_P(_N("TMC_SET_CHOP_%c %hhd %hhd %hhd %hhd\n"), "xyze"[axis], chop0, chop1, chop2, chop3);
  3032. }
  3033. }
  3034. }
  3035. #ifdef BACKLASH_X
  3036. else if (strncmp_P(CMDBUFFER_CURRENT_STRING, PSTR("BACKLASH_X"), 10) == 0)
  3037. {
  3038. uint8_t bl = (uint8_t)strtol(CMDBUFFER_CURRENT_STRING + 10, NULL, 10);
  3039. st_backlash_x = bl;
  3040. printf_P(_N("st_backlash_x = %hhd\n"), st_backlash_x);
  3041. }
  3042. #endif //BACKLASH_X
  3043. #ifdef BACKLASH_Y
  3044. else if (strncmp_P(CMDBUFFER_CURRENT_STRING, PSTR("BACKLASH_Y"), 10) == 0)
  3045. {
  3046. uint8_t bl = (uint8_t)strtol(CMDBUFFER_CURRENT_STRING + 10, NULL, 10);
  3047. st_backlash_y = bl;
  3048. printf_P(_N("st_backlash_y = %hhd\n"), st_backlash_y);
  3049. }
  3050. #endif //BACKLASH_Y
  3051. #endif //TMC2130
  3052. else if(code_seen("PRUSA")){
  3053. if (code_seen("Ping")) { //! PRUSA Ping
  3054. if (farm_mode) {
  3055. PingTime = _millis();
  3056. //MYSERIAL.print(farm_no); MYSERIAL.println(": OK");
  3057. }
  3058. }
  3059. else if (code_seen("PRN")) { //! PRUSA PRN
  3060. printf_P(_N("%d"), status_number);
  3061. }else if (code_seen("FAN")) { //! PRUSA FAN
  3062. printf_P(_N("E0:%d RPM\nPRN0:%d RPM\n"), 60*fan_speed[0], 60*fan_speed[1]);
  3063. }else if (code_seen("fn")) { //! PRUSA fn
  3064. if (farm_mode) {
  3065. printf_P(_N("%d"), farm_no);
  3066. }
  3067. else {
  3068. puts_P(_N("Not in farm mode."));
  3069. }
  3070. }
  3071. else if (code_seen("thx")) //! PRUSA thx
  3072. {
  3073. no_response = false;
  3074. }
  3075. else if (code_seen("uvlo")) //! PRUSA uvlo
  3076. {
  3077. eeprom_update_byte((uint8_t*)EEPROM_UVLO,0);
  3078. enquecommand_P(PSTR("M24"));
  3079. }
  3080. #ifdef FILAMENT_SENSOR
  3081. else if (code_seen("fsensor_recover_IR")) //! PRUSA fsensor_recover_IR
  3082. {
  3083. fsensor_restore_print_and_continue_IR();
  3084. }
  3085. else if (code_seen("fsensor_recover")) //! PRUSA fsensor_recover
  3086. {
  3087. fsensor_restore_print_and_continue();
  3088. }
  3089. #endif //FILAMENT_SENSOR
  3090. else if (code_seen("MMURES")) //! PRUSA MMURES
  3091. {
  3092. mmu_reset();
  3093. }
  3094. else if (code_seen("RESET")) { //! PRUSA RESET
  3095. // careful!
  3096. if (farm_mode) {
  3097. #if (defined(WATCHDOG) && (MOTHERBOARD == BOARD_EINSY_1_0a))
  3098. boot_app_magic = BOOT_APP_MAGIC;
  3099. boot_app_flags = BOOT_APP_FLG_RUN;
  3100. wdt_enable(WDTO_15MS);
  3101. cli();
  3102. while(1);
  3103. #else //WATCHDOG
  3104. asm volatile("jmp 0x3E000");
  3105. #endif //WATCHDOG
  3106. }
  3107. else {
  3108. MYSERIAL.println("Not in farm mode.");
  3109. }
  3110. }else if (code_seen("fv")) { //! PRUSA fv
  3111. // get file version
  3112. #ifdef SDSUPPORT
  3113. card.openFile(strchr_pointer + 3,true);
  3114. while (true) {
  3115. uint16_t readByte = card.get();
  3116. MYSERIAL.write(readByte);
  3117. if (readByte=='\n') {
  3118. break;
  3119. }
  3120. }
  3121. card.closefile();
  3122. #endif // SDSUPPORT
  3123. } else if (code_seen("M28")) { //! PRUSA M28
  3124. trace();
  3125. prusa_sd_card_upload = true;
  3126. card.openFile(strchr_pointer+4,false);
  3127. } else if (code_seen("SN")) { //! PRUSA SN
  3128. gcode_PRUSA_SN();
  3129. } else if(code_seen("Fir")){ //! PRUSA Fir
  3130. SERIAL_PROTOCOLLN(FW_VERSION_FULL);
  3131. } else if(code_seen("Rev")){ //! PRUSA Rev
  3132. SERIAL_PROTOCOLLN(FILAMENT_SIZE "-" ELECTRONICS "-" NOZZLE_TYPE );
  3133. } else if(code_seen("Lang")) { //! PRUSA Lang
  3134. lang_reset();
  3135. } else if(code_seen("Lz")) { //! PRUSA Lz
  3136. EEPROM_save_B(EEPROM_BABYSTEP_Z,0);
  3137. } else if(code_seen("Beat")) { //! PRUSA Beat
  3138. // Kick farm link timer
  3139. kicktime = _millis();
  3140. } else if(code_seen("FR")) { //! PRUSA FR
  3141. // Factory full reset
  3142. factory_reset(0);
  3143. }
  3144. //else if (code_seen('Cal')) {
  3145. // lcd_calibration();
  3146. // }
  3147. }
  3148. else if (code_seen('^')) {
  3149. // nothing, this is a version line
  3150. } else if(code_seen('G'))
  3151. {
  3152. gcode_in_progress = (int)code_value();
  3153. // printf_P(_N("BEGIN G-CODE=%u\n"), gcode_in_progress);
  3154. switch (gcode_in_progress)
  3155. {
  3156. case 0: // G0 -> G1
  3157. case 1: // G1
  3158. if(Stopped == false) {
  3159. #ifdef FILAMENT_RUNOUT_SUPPORT
  3160. if(READ(FR_SENS)){
  3161. int feedmultiplyBckp=feedmultiply;
  3162. float target[4];
  3163. float lastpos[4];
  3164. target[X_AXIS]=current_position[X_AXIS];
  3165. target[Y_AXIS]=current_position[Y_AXIS];
  3166. target[Z_AXIS]=current_position[Z_AXIS];
  3167. target[E_AXIS]=current_position[E_AXIS];
  3168. lastpos[X_AXIS]=current_position[X_AXIS];
  3169. lastpos[Y_AXIS]=current_position[Y_AXIS];
  3170. lastpos[Z_AXIS]=current_position[Z_AXIS];
  3171. lastpos[E_AXIS]=current_position[E_AXIS];
  3172. //retract by E
  3173. target[E_AXIS]+= FILAMENTCHANGE_FIRSTRETRACT ;
  3174. plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 400, active_extruder);
  3175. target[Z_AXIS]+= FILAMENTCHANGE_ZADD ;
  3176. plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 300, active_extruder);
  3177. target[X_AXIS]= FILAMENTCHANGE_XPOS ;
  3178. target[Y_AXIS]= FILAMENTCHANGE_YPOS ;
  3179. plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 70, active_extruder);
  3180. target[E_AXIS]+= FILAMENTCHANGE_FINALRETRACT ;
  3181. plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 20, active_extruder);
  3182. //finish moves
  3183. st_synchronize();
  3184. //disable extruder steppers so filament can be removed
  3185. disable_e0();
  3186. disable_e1();
  3187. disable_e2();
  3188. _delay(100);
  3189. //LCD_ALERTMESSAGEPGM(_T(MSG_FILAMENTCHANGE));
  3190. uint8_t cnt=0;
  3191. int counterBeep = 0;
  3192. lcd_wait_interact();
  3193. while(!lcd_clicked()){
  3194. cnt++;
  3195. manage_heater();
  3196. manage_inactivity(true);
  3197. //lcd_update(0);
  3198. if(cnt==0)
  3199. {
  3200. #if BEEPER > 0
  3201. if (counterBeep== 500){
  3202. counterBeep = 0;
  3203. }
  3204. SET_OUTPUT(BEEPER);
  3205. if (counterBeep== 0){
  3206. if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
  3207. WRITE(BEEPER,HIGH);
  3208. }
  3209. if (counterBeep== 20){
  3210. WRITE(BEEPER,LOW);
  3211. }
  3212. counterBeep++;
  3213. #else
  3214. #endif
  3215. }
  3216. }
  3217. WRITE(BEEPER,LOW);
  3218. target[E_AXIS]+= FILAMENTCHANGE_FIRSTFEED ;
  3219. plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 20, active_extruder);
  3220. target[E_AXIS]+= FILAMENTCHANGE_FINALFEED ;
  3221. plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 2, active_extruder);
  3222. lcd_change_fil_state = 0;
  3223. lcd_loading_filament();
  3224. while ((lcd_change_fil_state == 0)||(lcd_change_fil_state != 1)){
  3225. lcd_change_fil_state = 0;
  3226. lcd_alright();
  3227. switch(lcd_change_fil_state){
  3228. case 2:
  3229. target[E_AXIS]+= FILAMENTCHANGE_FIRSTFEED ;
  3230. plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 20, active_extruder);
  3231. target[E_AXIS]+= FILAMENTCHANGE_FINALFEED ;
  3232. plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 2, active_extruder);
  3233. lcd_loading_filament();
  3234. break;
  3235. case 3:
  3236. target[E_AXIS]+= FILAMENTCHANGE_FINALFEED ;
  3237. plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 2, active_extruder);
  3238. lcd_loading_color();
  3239. break;
  3240. default:
  3241. lcd_change_success();
  3242. break;
  3243. }
  3244. }
  3245. target[E_AXIS]+= 5;
  3246. plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 2, active_extruder);
  3247. target[E_AXIS]+= FILAMENTCHANGE_FIRSTRETRACT;
  3248. plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 400, active_extruder);
  3249. //current_position[E_AXIS]=target[E_AXIS]; //the long retract of L is compensated by manual filament feeding
  3250. //plan_set_e_position(current_position[E_AXIS]);
  3251. plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 70, active_extruder); //should do nothing
  3252. plan_buffer_line(lastpos[X_AXIS], lastpos[Y_AXIS], target[Z_AXIS], target[E_AXIS], 70, active_extruder); //move xy back
  3253. plan_buffer_line(lastpos[X_AXIS], lastpos[Y_AXIS], lastpos[Z_AXIS], target[E_AXIS], 200, active_extruder); //move z back
  3254. target[E_AXIS]= target[E_AXIS] - FILAMENTCHANGE_FIRSTRETRACT;
  3255. plan_buffer_line(lastpos[X_AXIS], lastpos[Y_AXIS], lastpos[Z_AXIS], target[E_AXIS], 5, active_extruder); //final untretract
  3256. plan_set_e_position(lastpos[E_AXIS]);
  3257. feedmultiply=feedmultiplyBckp;
  3258. char cmd[9];
  3259. sprintf_P(cmd, PSTR("M220 S%i"), feedmultiplyBckp);
  3260. enquecommand(cmd);
  3261. }
  3262. #endif
  3263. get_coordinates(); // For X Y Z E F
  3264. if (total_filament_used > ((current_position[E_AXIS] - destination[E_AXIS]) * 100)) { //protection against total_filament_used overflow
  3265. total_filament_used = total_filament_used + ((destination[E_AXIS] - current_position[E_AXIS]) * 100);
  3266. }
  3267. #ifdef FWRETRACT
  3268. if(cs.autoretract_enabled)
  3269. if( !(code_seen('X') || code_seen('Y') || code_seen('Z')) && code_seen('E')) {
  3270. float echange=destination[E_AXIS]-current_position[E_AXIS];
  3271. if((echange<-MIN_RETRACT && !retracted[active_extruder]) || (echange>MIN_RETRACT && retracted[active_extruder])) { //move appears to be an attempt to retract or recover
  3272. current_position[E_AXIS] = destination[E_AXIS]; //hide the slicer-generated retract/recover from calculations
  3273. plan_set_e_position(current_position[E_AXIS]); //AND from the planner
  3274. retract(!retracted[active_extruder]);
  3275. return;
  3276. }
  3277. }
  3278. #endif //FWRETRACT
  3279. prepare_move();
  3280. //ClearToSend();
  3281. }
  3282. break;
  3283. case 2: // G2 - CW ARC
  3284. if(Stopped == false) {
  3285. get_arc_coordinates();
  3286. prepare_arc_move(true);
  3287. }
  3288. break;
  3289. case 3: // G3 - CCW ARC
  3290. if(Stopped == false) {
  3291. get_arc_coordinates();
  3292. prepare_arc_move(false);
  3293. }
  3294. break;
  3295. case 4: // G4 dwell
  3296. codenum = 0;
  3297. if(code_seen('P')) codenum = code_value(); // milliseconds to wait
  3298. if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
  3299. if(codenum != 0) LCD_MESSAGERPGM(_n("Sleep..."));////MSG_DWELL
  3300. st_synchronize();
  3301. codenum += _millis(); // keep track of when we started waiting
  3302. previous_millis_cmd = _millis();
  3303. while(_millis() < codenum) {
  3304. manage_heater();
  3305. manage_inactivity();
  3306. lcd_update(0);
  3307. }
  3308. break;
  3309. #ifdef FWRETRACT
  3310. case 10: // G10 retract
  3311. #if EXTRUDERS > 1
  3312. retracted_swap[active_extruder]=(code_seen('S') && code_value_long() == 1); // checks for swap retract argument
  3313. retract(true,retracted_swap[active_extruder]);
  3314. #else
  3315. retract(true);
  3316. #endif
  3317. break;
  3318. case 11: // G11 retract_recover
  3319. #if EXTRUDERS > 1
  3320. retract(false,retracted_swap[active_extruder]);
  3321. #else
  3322. retract(false);
  3323. #endif
  3324. break;
  3325. #endif //FWRETRACT
  3326. case 28: //G28 Home all Axis one at a time
  3327. {
  3328. long home_x_value = 0;
  3329. long home_y_value = 0;
  3330. long home_z_value = 0;
  3331. // Which axes should be homed?
  3332. bool home_x = code_seen(axis_codes[X_AXIS]);
  3333. home_x_value = code_value_long();
  3334. bool home_y = code_seen(axis_codes[Y_AXIS]);
  3335. home_y_value = code_value_long();
  3336. bool home_z = code_seen(axis_codes[Z_AXIS]);
  3337. home_z_value = code_value_long();
  3338. bool without_mbl = code_seen('W');
  3339. // calibrate?
  3340. #ifdef TMC2130
  3341. bool calib = code_seen('C');
  3342. gcode_G28(home_x, home_x_value, home_y, home_y_value, home_z, home_z_value, calib, without_mbl);
  3343. #else
  3344. gcode_G28(home_x, home_x_value, home_y, home_y_value, home_z, home_z_value, without_mbl);
  3345. #endif //TMC2130
  3346. if ((home_x || home_y || without_mbl || home_z) == false) {
  3347. // Push the commands to the front of the message queue in the reverse order!
  3348. // There shall be always enough space reserved for these commands.
  3349. goto case_G80;
  3350. }
  3351. break;
  3352. }
  3353. #ifdef ENABLE_AUTO_BED_LEVELING
  3354. case 29: // G29 Detailed Z-Probe, probes the bed at 3 or more points.
  3355. {
  3356. #if Z_MIN_PIN == -1
  3357. #error "You must have a Z_MIN endstop in order to enable Auto Bed Leveling feature! Z_MIN_PIN must point to a valid hardware pin."
  3358. #endif
  3359. // Prevent user from running a G29 without first homing in X and Y
  3360. if (! (axis_known_position[X_AXIS] && axis_known_position[Y_AXIS]) )
  3361. {
  3362. LCD_MESSAGERPGM(MSG_POSITION_UNKNOWN);
  3363. SERIAL_ECHO_START;
  3364. SERIAL_ECHOLNRPGM(MSG_POSITION_UNKNOWN);
  3365. break; // abort G29, since we don't know where we are
  3366. }
  3367. st_synchronize();
  3368. // make sure the bed_level_rotation_matrix is identity or the planner will get it incorectly
  3369. //vector_3 corrected_position = plan_get_position_mm();
  3370. //corrected_position.debug("position before G29");
  3371. plan_bed_level_matrix.set_to_identity();
  3372. vector_3 uncorrected_position = plan_get_position();
  3373. //uncorrected_position.debug("position durring G29");
  3374. current_position[X_AXIS] = uncorrected_position.x;
  3375. current_position[Y_AXIS] = uncorrected_position.y;
  3376. current_position[Z_AXIS] = uncorrected_position.z;
  3377. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  3378. int l_feedmultiply = setup_for_endstop_move();
  3379. feedrate = homing_feedrate[Z_AXIS];
  3380. #ifdef AUTO_BED_LEVELING_GRID
  3381. // probe at the points of a lattice grid
  3382. int xGridSpacing = (RIGHT_PROBE_BED_POSITION - LEFT_PROBE_BED_POSITION) / (AUTO_BED_LEVELING_GRID_POINTS-1);
  3383. int yGridSpacing = (BACK_PROBE_BED_POSITION - FRONT_PROBE_BED_POSITION) / (AUTO_BED_LEVELING_GRID_POINTS-1);
  3384. // solve the plane equation ax + by + d = z
  3385. // A is the matrix with rows [x y 1] for all the probed points
  3386. // B is the vector of the Z positions
  3387. // the normal vector to the plane is formed by the coefficients of the plane equation in the standard form, which is Vx*x+Vy*y+Vz*z+d = 0
  3388. // so Vx = -a Vy = -b Vz = 1 (we want the vector facing towards positive Z
  3389. // "A" matrix of the linear system of equations
  3390. double eqnAMatrix[AUTO_BED_LEVELING_GRID_POINTS*AUTO_BED_LEVELING_GRID_POINTS*3];
  3391. // "B" vector of Z points
  3392. double eqnBVector[AUTO_BED_LEVELING_GRID_POINTS*AUTO_BED_LEVELING_GRID_POINTS];
  3393. int probePointCounter = 0;
  3394. bool zig = true;
  3395. for (int yProbe=FRONT_PROBE_BED_POSITION; yProbe <= BACK_PROBE_BED_POSITION; yProbe += yGridSpacing)
  3396. {
  3397. int xProbe, xInc;
  3398. if (zig)
  3399. {
  3400. xProbe = LEFT_PROBE_BED_POSITION;
  3401. //xEnd = RIGHT_PROBE_BED_POSITION;
  3402. xInc = xGridSpacing;
  3403. zig = false;
  3404. } else // zag
  3405. {
  3406. xProbe = RIGHT_PROBE_BED_POSITION;
  3407. //xEnd = LEFT_PROBE_BED_POSITION;
  3408. xInc = -xGridSpacing;
  3409. zig = true;
  3410. }
  3411. for (int xCount=0; xCount < AUTO_BED_LEVELING_GRID_POINTS; xCount++)
  3412. {
  3413. float z_before;
  3414. if (probePointCounter == 0)
  3415. {
  3416. // raise before probing
  3417. z_before = Z_RAISE_BEFORE_PROBING;
  3418. } else
  3419. {
  3420. // raise extruder
  3421. z_before = current_position[Z_AXIS] + Z_RAISE_BETWEEN_PROBINGS;
  3422. }
  3423. float measured_z = probe_pt(xProbe, yProbe, z_before);
  3424. eqnBVector[probePointCounter] = measured_z;
  3425. eqnAMatrix[probePointCounter + 0*AUTO_BED_LEVELING_GRID_POINTS*AUTO_BED_LEVELING_GRID_POINTS] = xProbe;
  3426. eqnAMatrix[probePointCounter + 1*AUTO_BED_LEVELING_GRID_POINTS*AUTO_BED_LEVELING_GRID_POINTS] = yProbe;
  3427. eqnAMatrix[probePointCounter + 2*AUTO_BED_LEVELING_GRID_POINTS*AUTO_BED_LEVELING_GRID_POINTS] = 1;
  3428. probePointCounter++;
  3429. xProbe += xInc;
  3430. }
  3431. }
  3432. clean_up_after_endstop_move(l_feedmultiply);
  3433. // solve lsq problem
  3434. double *plane_equation_coefficients = qr_solve(AUTO_BED_LEVELING_GRID_POINTS*AUTO_BED_LEVELING_GRID_POINTS, 3, eqnAMatrix, eqnBVector);
  3435. SERIAL_PROTOCOLPGM("Eqn coefficients: a: ");
  3436. SERIAL_PROTOCOL(plane_equation_coefficients[0]);
  3437. SERIAL_PROTOCOLPGM(" b: ");
  3438. SERIAL_PROTOCOL(plane_equation_coefficients[1]);
  3439. SERIAL_PROTOCOLPGM(" d: ");
  3440. SERIAL_PROTOCOLLN(plane_equation_coefficients[2]);
  3441. set_bed_level_equation_lsq(plane_equation_coefficients);
  3442. free(plane_equation_coefficients);
  3443. #else // AUTO_BED_LEVELING_GRID not defined
  3444. // Probe at 3 arbitrary points
  3445. // probe 1
  3446. float z_at_pt_1 = probe_pt(ABL_PROBE_PT_1_X, ABL_PROBE_PT_1_Y, Z_RAISE_BEFORE_PROBING);
  3447. // probe 2
  3448. float z_at_pt_2 = probe_pt(ABL_PROBE_PT_2_X, ABL_PROBE_PT_2_Y, current_position[Z_AXIS] + Z_RAISE_BETWEEN_PROBINGS);
  3449. // probe 3
  3450. float z_at_pt_3 = probe_pt(ABL_PROBE_PT_3_X, ABL_PROBE_PT_3_Y, current_position[Z_AXIS] + Z_RAISE_BETWEEN_PROBINGS);
  3451. clean_up_after_endstop_move(l_feedmultiply);
  3452. set_bed_level_equation_3pts(z_at_pt_1, z_at_pt_2, z_at_pt_3);
  3453. #endif // AUTO_BED_LEVELING_GRID
  3454. st_synchronize();
  3455. // The following code correct the Z height difference from z-probe position and hotend tip position.
  3456. // The Z height on homing is measured by Z-Probe, but the probe is quite far from the hotend.
  3457. // When the bed is uneven, this height must be corrected.
  3458. real_z = float(st_get_position(Z_AXIS))/cs.axis_steps_per_unit[Z_AXIS]; //get the real Z (since the auto bed leveling is already correcting the plane)
  3459. x_tmp = current_position[X_AXIS] + X_PROBE_OFFSET_FROM_EXTRUDER;
  3460. y_tmp = current_position[Y_AXIS] + Y_PROBE_OFFSET_FROM_EXTRUDER;
  3461. z_tmp = current_position[Z_AXIS];
  3462. apply_rotation_xyz(plan_bed_level_matrix, x_tmp, y_tmp, z_tmp); //Apply the correction sending the probe offset
  3463. current_position[Z_AXIS] = z_tmp - real_z + current_position[Z_AXIS]; //The difference is added to current position and sent to planner.
  3464. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  3465. }
  3466. break;
  3467. #ifndef Z_PROBE_SLED
  3468. case 30: // G30 Single Z Probe
  3469. {
  3470. st_synchronize();
  3471. // TODO: make sure the bed_level_rotation_matrix is identity or the planner will get set incorectly
  3472. int l_feedmultiply = setup_for_endstop_move();
  3473. feedrate = homing_feedrate[Z_AXIS];
  3474. run_z_probe();
  3475. SERIAL_PROTOCOLPGM(_T(MSG_BED));
  3476. SERIAL_PROTOCOLPGM(" X: ");
  3477. SERIAL_PROTOCOL(current_position[X_AXIS]);
  3478. SERIAL_PROTOCOLPGM(" Y: ");
  3479. SERIAL_PROTOCOL(current_position[Y_AXIS]);
  3480. SERIAL_PROTOCOLPGM(" Z: ");
  3481. SERIAL_PROTOCOL(current_position[Z_AXIS]);
  3482. SERIAL_PROTOCOLPGM("\n");
  3483. clean_up_after_endstop_move(l_feedmultiply);
  3484. }
  3485. break;
  3486. #else
  3487. case 31: // dock the sled
  3488. dock_sled(true);
  3489. break;
  3490. case 32: // undock the sled
  3491. dock_sled(false);
  3492. break;
  3493. #endif // Z_PROBE_SLED
  3494. #endif // ENABLE_AUTO_BED_LEVELING
  3495. #ifdef MESH_BED_LEVELING
  3496. case 30: // G30 Single Z Probe
  3497. {
  3498. st_synchronize();
  3499. // TODO: make sure the bed_level_rotation_matrix is identity or the planner will get set incorectly
  3500. int l_feedmultiply = setup_for_endstop_move();
  3501. feedrate = homing_feedrate[Z_AXIS];
  3502. find_bed_induction_sensor_point_z(-10.f, 3);
  3503. printf_P(_N("%S X: %.5f Y: %.5f Z: %.5f\n"), _T(MSG_BED), _x, _y, _z);
  3504. clean_up_after_endstop_move(l_feedmultiply);
  3505. }
  3506. break;
  3507. case 75:
  3508. {
  3509. for (int i = 40; i <= 110; i++)
  3510. printf_P(_N("%d %.2f"), i, temp_comp_interpolation(i));
  3511. }
  3512. break;
  3513. case 76: //! G76 - PINDA probe temperature calibration
  3514. {
  3515. #ifdef PINDA_THERMISTOR
  3516. if (true)
  3517. {
  3518. if (calibration_status() >= CALIBRATION_STATUS_XYZ_CALIBRATION) {
  3519. //we need to know accurate position of first calibration point
  3520. //if xyz calibration was not performed yet, interrupt temperature calibration and inform user that xyz cal. is needed
  3521. lcd_show_fullscreen_message_and_wait_P(_i("Please run XYZ calibration first."));
  3522. break;
  3523. }
  3524. if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS]))
  3525. {
  3526. // We don't know where we are! HOME!
  3527. // Push the commands to the front of the message queue in the reverse order!
  3528. // There shall be always enough space reserved for these commands.
  3529. repeatcommand_front(); // repeat G76 with all its parameters
  3530. enquecommand_front_P((PSTR("G28 W0")));
  3531. break;
  3532. }
  3533. lcd_show_fullscreen_message_and_wait_P(_i("Stable ambient temperature 21-26C is needed a rigid stand is required."));////MSG_TEMP_CAL_WARNING c=20 r=4
  3534. bool result = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_STEEL_SHEET_CHECK), false, false);
  3535. if (result)
  3536. {
  3537. current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
  3538. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3539. current_position[Z_AXIS] = 50;
  3540. current_position[Y_AXIS] = 180;
  3541. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3542. st_synchronize();
  3543. lcd_show_fullscreen_message_and_wait_P(_T(MSG_REMOVE_STEEL_SHEET));
  3544. current_position[Y_AXIS] = pgm_read_float(bed_ref_points_4 + 1);
  3545. current_position[X_AXIS] = pgm_read_float(bed_ref_points_4);
  3546. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3547. st_synchronize();
  3548. gcode_G28(false, false, true);
  3549. }
  3550. if ((current_temperature_pinda > 35) && (farm_mode == false)) {
  3551. //waiting for PIDNA probe to cool down in case that we are not in farm mode
  3552. current_position[Z_AXIS] = 100;
  3553. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3554. if (lcd_wait_for_pinda(35) == false) { //waiting for PINDA probe to cool, if this takes more then time expected, temp. cal. fails
  3555. lcd_temp_cal_show_result(false);
  3556. break;
  3557. }
  3558. }
  3559. lcd_update_enable(true);
  3560. KEEPALIVE_STATE(NOT_BUSY); //no need to print busy messages as we print current temperatures periodicaly
  3561. SERIAL_ECHOLNPGM("PINDA probe calibration start");
  3562. float zero_z;
  3563. int z_shift = 0; //unit: steps
  3564. float start_temp = 5 * (int)(current_temperature_pinda / 5);
  3565. if (start_temp < 35) start_temp = 35;
  3566. if (start_temp < current_temperature_pinda) start_temp += 5;
  3567. printf_P(_N("start temperature: %.1f\n"), start_temp);
  3568. // setTargetHotend(200, 0);
  3569. setTargetBed(70 + (start_temp - 30));
  3570. custom_message_type = CUSTOM_MSG_TYPE_TEMCAL;
  3571. custom_message_state = 1;
  3572. lcd_setstatuspgm(_T(MSG_TEMP_CALIBRATION));
  3573. current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
  3574. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3575. current_position[X_AXIS] = PINDA_PREHEAT_X;
  3576. current_position[Y_AXIS] = PINDA_PREHEAT_Y;
  3577. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3578. current_position[Z_AXIS] = PINDA_PREHEAT_Z;
  3579. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3580. st_synchronize();
  3581. while (current_temperature_pinda < start_temp)
  3582. {
  3583. delay_keep_alive(1000);
  3584. serialecho_temperatures();
  3585. }
  3586. eeprom_update_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 0); //invalidate temp. calibration in case that in will be aborted during the calibration process
  3587. current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
  3588. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3589. current_position[X_AXIS] = pgm_read_float(bed_ref_points_4);
  3590. current_position[Y_AXIS] = pgm_read_float(bed_ref_points_4 + 1);
  3591. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3592. st_synchronize();
  3593. bool find_z_result = find_bed_induction_sensor_point_z(-1.f);
  3594. if (find_z_result == false) {
  3595. lcd_temp_cal_show_result(find_z_result);
  3596. break;
  3597. }
  3598. zero_z = current_position[Z_AXIS];
  3599. printf_P(_N("\nZERO: %.3f\n"), current_position[Z_AXIS]);
  3600. int i = -1; for (; i < 5; i++)
  3601. {
  3602. float temp = (40 + i * 5);
  3603. printf_P(_N("\nStep: %d/6 (skipped)\nPINDA temperature: %d Z shift (mm):0\n"), i + 2, (40 + i*5));
  3604. if (i >= 0) EEPROM_save_B(EEPROM_PROBE_TEMP_SHIFT + i * 2, &z_shift);
  3605. if (start_temp <= temp) break;
  3606. }
  3607. for (i++; i < 5; i++)
  3608. {
  3609. float temp = (40 + i * 5);
  3610. printf_P(_N("\nStep: %d/6\n"), i + 2);
  3611. custom_message_state = i + 2;
  3612. setTargetBed(50 + 10 * (temp - 30) / 5);
  3613. // setTargetHotend(255, 0);
  3614. current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
  3615. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3616. current_position[X_AXIS] = PINDA_PREHEAT_X;
  3617. current_position[Y_AXIS] = PINDA_PREHEAT_Y;
  3618. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3619. current_position[Z_AXIS] = PINDA_PREHEAT_Z;
  3620. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3621. st_synchronize();
  3622. while (current_temperature_pinda < temp)
  3623. {
  3624. delay_keep_alive(1000);
  3625. serialecho_temperatures();
  3626. }
  3627. current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
  3628. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3629. current_position[X_AXIS] = pgm_read_float(bed_ref_points_4);
  3630. current_position[Y_AXIS] = pgm_read_float(bed_ref_points_4 + 1);
  3631. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3632. st_synchronize();
  3633. find_z_result = find_bed_induction_sensor_point_z(-1.f);
  3634. if (find_z_result == false) {
  3635. lcd_temp_cal_show_result(find_z_result);
  3636. break;
  3637. }
  3638. z_shift = (int)((current_position[Z_AXIS] - zero_z)*cs.axis_steps_per_unit[Z_AXIS]);
  3639. printf_P(_N("\nPINDA temperature: %.1f Z shift (mm): %.3f"), current_temperature_pinda, current_position[Z_AXIS] - zero_z);
  3640. EEPROM_save_B(EEPROM_PROBE_TEMP_SHIFT + i * 2, &z_shift);
  3641. }
  3642. lcd_temp_cal_show_result(true);
  3643. break;
  3644. }
  3645. #endif //PINDA_THERMISTOR
  3646. setTargetBed(PINDA_MIN_T);
  3647. float zero_z;
  3648. int z_shift = 0; //unit: steps
  3649. int t_c; // temperature
  3650. if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS])) {
  3651. // We don't know where we are! HOME!
  3652. // Push the commands to the front of the message queue in the reverse order!
  3653. // There shall be always enough space reserved for these commands.
  3654. repeatcommand_front(); // repeat G76 with all its parameters
  3655. enquecommand_front_P((PSTR("G28 W0")));
  3656. break;
  3657. }
  3658. puts_P(_N("PINDA probe calibration start"));
  3659. custom_message_type = CUSTOM_MSG_TYPE_TEMCAL;
  3660. custom_message_state = 1;
  3661. lcd_setstatuspgm(_T(MSG_TEMP_CALIBRATION));
  3662. current_position[X_AXIS] = PINDA_PREHEAT_X;
  3663. current_position[Y_AXIS] = PINDA_PREHEAT_Y;
  3664. current_position[Z_AXIS] = PINDA_PREHEAT_Z;
  3665. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3666. st_synchronize();
  3667. while (abs(degBed() - PINDA_MIN_T) > 1) {
  3668. delay_keep_alive(1000);
  3669. serialecho_temperatures();
  3670. }
  3671. //enquecommand_P(PSTR("M190 S50"));
  3672. for (int i = 0; i < PINDA_HEAT_T; i++) {
  3673. delay_keep_alive(1000);
  3674. serialecho_temperatures();
  3675. }
  3676. eeprom_update_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 0); //invalidate temp. calibration in case that in will be aborted during the calibration process
  3677. current_position[Z_AXIS] = 5;
  3678. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3679. current_position[X_AXIS] = BED_X0;
  3680. current_position[Y_AXIS] = BED_Y0;
  3681. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3682. st_synchronize();
  3683. find_bed_induction_sensor_point_z(-1.f);
  3684. zero_z = current_position[Z_AXIS];
  3685. printf_P(_N("\nZERO: %.3f\n"), current_position[Z_AXIS]);
  3686. for (int i = 0; i<5; i++) {
  3687. printf_P(_N("\nStep: %d/6\n"), i + 2);
  3688. custom_message_state = i + 2;
  3689. t_c = 60 + i * 10;
  3690. setTargetBed(t_c);
  3691. current_position[X_AXIS] = PINDA_PREHEAT_X;
  3692. current_position[Y_AXIS] = PINDA_PREHEAT_Y;
  3693. current_position[Z_AXIS] = PINDA_PREHEAT_Z;
  3694. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3695. st_synchronize();
  3696. while (degBed() < t_c) {
  3697. delay_keep_alive(1000);
  3698. serialecho_temperatures();
  3699. }
  3700. for (int i = 0; i < PINDA_HEAT_T; i++) {
  3701. delay_keep_alive(1000);
  3702. serialecho_temperatures();
  3703. }
  3704. current_position[Z_AXIS] = 5;
  3705. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3706. current_position[X_AXIS] = BED_X0;
  3707. current_position[Y_AXIS] = BED_Y0;
  3708. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  3709. st_synchronize();
  3710. find_bed_induction_sensor_point_z(-1.f);
  3711. z_shift = (int)((current_position[Z_AXIS] - zero_z)*cs.axis_steps_per_unit[Z_AXIS]);
  3712. printf_P(_N("\nTemperature: %d Z shift (mm): %.3f\n"), t_c, current_position[Z_AXIS] - zero_z);
  3713. EEPROM_save_B(EEPROM_PROBE_TEMP_SHIFT + i*2, &z_shift);
  3714. }
  3715. custom_message_type = CUSTOM_MSG_TYPE_STATUS;
  3716. eeprom_update_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 1);
  3717. puts_P(_N("Temperature calibration done."));
  3718. disable_x();
  3719. disable_y();
  3720. disable_z();
  3721. disable_e0();
  3722. disable_e1();
  3723. disable_e2();
  3724. setTargetBed(0); //set bed target temperature back to 0
  3725. lcd_show_fullscreen_message_and_wait_P(_T(MSG_TEMP_CALIBRATION_DONE));
  3726. temp_cal_active = true;
  3727. eeprom_update_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE, 1);
  3728. lcd_update_enable(true);
  3729. lcd_update(2);
  3730. }
  3731. break;
  3732. /**
  3733. * G80: Mesh-based Z probe, probes a grid and produces a
  3734. * mesh to compensate for variable bed height
  3735. *
  3736. * The S0 report the points as below
  3737. * @code{.unparsed}
  3738. * +----> X-axis
  3739. * |
  3740. * |
  3741. * v Y-axis
  3742. * @endcode
  3743. */
  3744. case 80:
  3745. #ifdef MK1BP
  3746. break;
  3747. #endif //MK1BP
  3748. case_G80:
  3749. {
  3750. mesh_bed_leveling_flag = true;
  3751. static bool run = false;
  3752. #ifdef SUPPORT_VERBOSITY
  3753. int8_t verbosity_level = 0;
  3754. if (code_seen('V')) {
  3755. // Just 'V' without a number counts as V1.
  3756. char c = strchr_pointer[1];
  3757. verbosity_level = (c == ' ' || c == '\t' || c == 0) ? 1 : code_value_short();
  3758. }
  3759. #endif //SUPPORT_VERBOSITY
  3760. // Firstly check if we know where we are
  3761. if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS])) {
  3762. // We don't know where we are! HOME!
  3763. // Push the commands to the front of the message queue in the reverse order!
  3764. // There shall be always enough space reserved for these commands.
  3765. if (lcd_commands_type != LCD_COMMAND_STOP_PRINT) {
  3766. repeatcommand_front(); // repeat G80 with all its parameters
  3767. enquecommand_front_P((PSTR("G28 W0")));
  3768. }
  3769. else {
  3770. mesh_bed_leveling_flag = false;
  3771. }
  3772. break;
  3773. }
  3774. uint8_t nMeasPoints = MESH_MEAS_NUM_X_POINTS;
  3775. if (code_seen('N')) {
  3776. nMeasPoints = code_value_uint8();
  3777. if (nMeasPoints != 7) {
  3778. nMeasPoints = 3;
  3779. }
  3780. }
  3781. else {
  3782. nMeasPoints = eeprom_read_byte((uint8_t*)EEPROM_MBL_POINTS_NR);
  3783. }
  3784. uint8_t nProbeRetry = 3;
  3785. if (code_seen('R')) {
  3786. nProbeRetry = code_value_uint8();
  3787. if (nProbeRetry > 10) {
  3788. nProbeRetry = 10;
  3789. }
  3790. }
  3791. else {
  3792. nProbeRetry = eeprom_read_byte((uint8_t*)EEPROM_MBL_PROBE_NR);
  3793. }
  3794. bool magnet_elimination = (eeprom_read_byte((uint8_t*)EEPROM_MBL_MAGNET_ELIMINATION) > 0);
  3795. bool temp_comp_start = true;
  3796. #ifdef PINDA_THERMISTOR
  3797. temp_comp_start = false;
  3798. #endif //PINDA_THERMISTOR
  3799. if (temp_comp_start)
  3800. if (run == false && temp_cal_active == true && calibration_status_pinda() == true && target_temperature_bed >= 50) {
  3801. if (lcd_commands_type != LCD_COMMAND_STOP_PRINT) {
  3802. temp_compensation_start();
  3803. run = true;
  3804. repeatcommand_front(); // repeat G80 with all its parameters
  3805. enquecommand_front_P((PSTR("G28 W0")));
  3806. }
  3807. else {
  3808. mesh_bed_leveling_flag = false;
  3809. }
  3810. break;
  3811. }
  3812. run = false;
  3813. if (lcd_commands_type == LCD_COMMAND_STOP_PRINT) {
  3814. mesh_bed_leveling_flag = false;
  3815. break;
  3816. }
  3817. // Save custom message state, set a new custom message state to display: Calibrating point 9.
  3818. unsigned int custom_message_type_old = custom_message_type;
  3819. unsigned int custom_message_state_old = custom_message_state;
  3820. custom_message_type = CUSTOM_MSG_TYPE_MESHBL;
  3821. custom_message_state = (nMeasPoints * nMeasPoints) + 10;
  3822. lcd_update(1);
  3823. mbl.reset(); //reset mesh bed leveling
  3824. // Reset baby stepping to zero, if the babystepping has already been loaded before. The babystepsTodo value will be
  3825. // consumed during the first movements following this statement.
  3826. babystep_undo();
  3827. // Cycle through all points and probe them
  3828. // First move up. During this first movement, the babystepping will be reverted.
  3829. current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
  3830. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[Z_AXIS] / 60, active_extruder);
  3831. // The move to the first calibration point.
  3832. current_position[X_AXIS] = BED_X0;
  3833. current_position[Y_AXIS] = BED_Y0;
  3834. #ifdef SUPPORT_VERBOSITY
  3835. if (verbosity_level >= 1)
  3836. {
  3837. bool clamped = world2machine_clamp(current_position[X_AXIS], current_position[Y_AXIS]);
  3838. clamped ? SERIAL_PROTOCOLPGM("First calibration point clamped.\n") : SERIAL_PROTOCOLPGM("No clamping for first calibration point.\n");
  3839. }
  3840. #else //SUPPORT_VERBOSITY
  3841. world2machine_clamp(current_position[X_AXIS], current_position[Y_AXIS]);
  3842. #endif //SUPPORT_VERBOSITY
  3843. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[X_AXIS] / 30, active_extruder);
  3844. // Wait until the move is finished.
  3845. st_synchronize();
  3846. uint8_t mesh_point = 0; //index number of calibration point
  3847. int XY_AXIS_FEEDRATE = homing_feedrate[X_AXIS] / 20;
  3848. int Z_LIFT_FEEDRATE = homing_feedrate[Z_AXIS] / 40;
  3849. bool has_z = is_bed_z_jitter_data_valid(); //checks if we have data from Z calibration (offsets of the Z heiths of the 8 calibration points from the first point)
  3850. #ifdef SUPPORT_VERBOSITY
  3851. if (verbosity_level >= 1) {
  3852. has_z ? SERIAL_PROTOCOLPGM("Z jitter data from Z cal. valid.\n") : SERIAL_PROTOCOLPGM("Z jitter data from Z cal. not valid.\n");
  3853. }
  3854. #endif // SUPPORT_VERBOSITY
  3855. int l_feedmultiply = setup_for_endstop_move(false); //save feedrate and feedmultiply, sets feedmultiply to 100
  3856. const char *kill_message = NULL;
  3857. while (mesh_point != nMeasPoints * nMeasPoints) {
  3858. // Get coords of a measuring point.
  3859. uint8_t ix = mesh_point % nMeasPoints; // from 0 to MESH_NUM_X_POINTS - 1
  3860. uint8_t iy = mesh_point / nMeasPoints;
  3861. /*if (!mbl_point_measurement_valid(ix, iy, nMeasPoints, true)) {
  3862. printf_P(PSTR("Skipping point [%d;%d] \n"), ix, iy);
  3863. custom_message_state--;
  3864. mesh_point++;
  3865. continue; //skip
  3866. }*/
  3867. if (iy & 1) ix = (nMeasPoints - 1) - ix; // Zig zag
  3868. if (nMeasPoints == 7) //if we have 7x7 mesh, compare with Z-calibration for points which are in 3x3 mesh
  3869. {
  3870. has_z = ((ix % 3 == 0) && (iy % 3 == 0)) && is_bed_z_jitter_data_valid();
  3871. }
  3872. float z0 = 0.f;
  3873. if (has_z && (mesh_point > 0)) {
  3874. uint16_t z_offset_u = 0;
  3875. if (nMeasPoints == 7) {
  3876. z_offset_u = eeprom_read_word((uint16_t*)(EEPROM_BED_CALIBRATION_Z_JITTER + 2 * ((ix/3) + iy - 1)));
  3877. }
  3878. else {
  3879. z_offset_u = eeprom_read_word((uint16_t*)(EEPROM_BED_CALIBRATION_Z_JITTER + 2 * (ix + iy * 3 - 1)));
  3880. }
  3881. z0 = mbl.z_values[0][0] + *reinterpret_cast<int16_t*>(&z_offset_u) * 0.01;
  3882. #ifdef SUPPORT_VERBOSITY
  3883. if (verbosity_level >= 1) {
  3884. printf_P(PSTR("Bed leveling, point: %d, calibration Z stored in eeprom: %d, calibration z: %f \n"), mesh_point, z_offset_u, z0);
  3885. }
  3886. #endif // SUPPORT_VERBOSITY
  3887. }
  3888. // Move Z up to MESH_HOME_Z_SEARCH.
  3889. if((ix == 0) && (iy == 0)) current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
  3890. else current_position[Z_AXIS] += 2.f / nMeasPoints; //use relative movement from Z coordinate where PINDa triggered on previous point. This makes calibration faster.
  3891. float init_z_bckp = current_position[Z_AXIS];
  3892. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], Z_LIFT_FEEDRATE, active_extruder);
  3893. st_synchronize();
  3894. // Move to XY position of the sensor point.
  3895. current_position[X_AXIS] = BED_X(ix, nMeasPoints);
  3896. current_position[Y_AXIS] = BED_Y(iy, nMeasPoints);
  3897. //printf_P(PSTR("[%f;%f]\n"), current_position[X_AXIS], current_position[Y_AXIS]);
  3898. #ifdef SUPPORT_VERBOSITY
  3899. if (verbosity_level >= 1) {
  3900. clamped = world2machine_clamp(current_position[X_AXIS], current_position[Y_AXIS]);
  3901. SERIAL_PROTOCOL(mesh_point);
  3902. clamped ? SERIAL_PROTOCOLPGM(": xy clamped.\n") : SERIAL_PROTOCOLPGM(": no xy clamping\n");
  3903. }
  3904. #else //SUPPORT_VERBOSITY
  3905. world2machine_clamp(current_position[X_AXIS], current_position[Y_AXIS]);
  3906. #endif // SUPPORT_VERBOSITY
  3907. //printf_P(PSTR("after clamping: [%f;%f]\n"), current_position[X_AXIS], current_position[Y_AXIS]);
  3908. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], XY_AXIS_FEEDRATE, active_extruder);
  3909. st_synchronize();
  3910. // Go down until endstop is hit
  3911. const float Z_CALIBRATION_THRESHOLD = 1.f;
  3912. if (!find_bed_induction_sensor_point_z((has_z && mesh_point > 0) ? z0 - Z_CALIBRATION_THRESHOLD : -10.f, nProbeRetry)) { //if we have data from z calibration max allowed difference is 1mm for each point, if we dont have data max difference is 10mm from initial point
  3913. printf_P(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
  3914. break;
  3915. }
  3916. if (init_z_bckp - current_position[Z_AXIS] < 0.1f) { //broken cable or initial Z coordinate too low. Go to MESH_HOME_Z_SEARCH and repeat last step (z-probe) again to distinguish between these two cases.
  3917. //printf_P(PSTR("Another attempt! Current Z position: %f\n"), current_position[Z_AXIS]);
  3918. current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
  3919. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], Z_LIFT_FEEDRATE, active_extruder);
  3920. st_synchronize();
  3921. if (!find_bed_induction_sensor_point_z((has_z && mesh_point > 0) ? z0 - Z_CALIBRATION_THRESHOLD : -10.f, nProbeRetry)) { //if we have data from z calibration max allowed difference is 1mm for each point, if we dont have data max difference is 10mm from initial point
  3922. printf_P(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
  3923. break;
  3924. }
  3925. if (MESH_HOME_Z_SEARCH - current_position[Z_AXIS] < 0.1f) {
  3926. printf_P(PSTR("Bed leveling failed. Sensor disconnected or cable broken.\n"));
  3927. break;
  3928. }
  3929. }
  3930. if (has_z && fabs(z0 - current_position[Z_AXIS]) > Z_CALIBRATION_THRESHOLD) { //if we have data from z calibration, max. allowed difference is 1mm for each point
  3931. printf_P(PSTR("Bed leveling failed. Sensor triggered too high.\n"));
  3932. break;
  3933. }
  3934. #ifdef SUPPORT_VERBOSITY
  3935. if (verbosity_level >= 10) {
  3936. SERIAL_ECHOPGM("X: ");
  3937. MYSERIAL.print(current_position[X_AXIS], 5);
  3938. SERIAL_ECHOLNPGM("");
  3939. SERIAL_ECHOPGM("Y: ");
  3940. MYSERIAL.print(current_position[Y_AXIS], 5);
  3941. SERIAL_PROTOCOLPGM("\n");
  3942. }
  3943. #endif // SUPPORT_VERBOSITY
  3944. float offset_z = 0;
  3945. #ifdef PINDA_THERMISTOR
  3946. offset_z = temp_compensation_pinda_thermistor_offset(current_temperature_pinda);
  3947. #endif //PINDA_THERMISTOR
  3948. // #ifdef SUPPORT_VERBOSITY
  3949. /* if (verbosity_level >= 1)
  3950. {
  3951. SERIAL_ECHOPGM("mesh bed leveling: ");
  3952. MYSERIAL.print(current_position[Z_AXIS], 5);
  3953. SERIAL_ECHOPGM(" offset: ");
  3954. MYSERIAL.print(offset_z, 5);
  3955. SERIAL_ECHOLNPGM("");
  3956. }*/
  3957. // #endif // SUPPORT_VERBOSITY
  3958. mbl.set_z(ix, iy, current_position[Z_AXIS] - offset_z); //store measured z values z_values[iy][ix] = z - offset_z;
  3959. custom_message_state--;
  3960. mesh_point++;
  3961. lcd_update(1);
  3962. }
  3963. current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
  3964. #ifdef SUPPORT_VERBOSITY
  3965. if (verbosity_level >= 20) {
  3966. SERIAL_ECHOLNPGM("Mesh bed leveling while loop finished.");
  3967. SERIAL_ECHOLNPGM("MESH_HOME_Z_SEARCH: ");
  3968. MYSERIAL.print(current_position[Z_AXIS], 5);
  3969. }
  3970. #endif // SUPPORT_VERBOSITY
  3971. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], Z_LIFT_FEEDRATE, active_extruder);
  3972. st_synchronize();
  3973. if (mesh_point != nMeasPoints * nMeasPoints) {
  3974. Sound_MakeSound(e_SOUND_TYPE_StandardAlert);
  3975. bool bState;
  3976. do { // repeat until Z-leveling o.k.
  3977. lcd_display_message_fullscreen_P(_i("Some problem encountered, Z-leveling enforced ..."));
  3978. #ifdef TMC2130
  3979. lcd_wait_for_click_delay(MSG_BED_LEVELING_FAILED_TIMEOUT);
  3980. calibrate_z_auto(); // Z-leveling (X-assembly stay up!!!)
  3981. #else // TMC2130
  3982. lcd_wait_for_click_delay(0); // ~ no timeout
  3983. lcd_calibrate_z_end_stop_manual(true); // Z-leveling (X-assembly stay up!!!)
  3984. #endif // TMC2130
  3985. // ~ Z-homing (can not be used "G28", because X & Y-homing would have been done before (Z-homing))
  3986. bState=enable_z_endstop(false);
  3987. current_position[Z_AXIS] -= 1;
  3988. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[Z_AXIS] / 40, active_extruder);
  3989. st_synchronize();
  3990. enable_z_endstop(true);
  3991. #ifdef TMC2130
  3992. tmc2130_home_enter(Z_AXIS_MASK);
  3993. #endif // TMC2130
  3994. current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
  3995. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[Z_AXIS] / 40, active_extruder);
  3996. st_synchronize();
  3997. #ifdef TMC2130
  3998. tmc2130_home_exit();
  3999. #endif // TMC2130
  4000. enable_z_endstop(bState);
  4001. } while (st_get_position_mm(Z_AXIS) > MESH_HOME_Z_SEARCH); // i.e. Z-leveling not o.k.
  4002. // plan_set_z_position(MESH_HOME_Z_SEARCH); // is not necessary ('do-while' loop always ends at the expected Z-position)
  4003. custom_message_type=CUSTOM_MSG_TYPE_STATUS; // display / status-line recovery
  4004. lcd_update_enable(true); // display / status-line recovery
  4005. gcode_G28(true, true, true); // X & Y & Z-homing (must be after individual Z-homing (problem with spool-holder)!)
  4006. repeatcommand_front(); // re-run (i.e. of "G80")
  4007. break;
  4008. }
  4009. clean_up_after_endstop_move(l_feedmultiply);
  4010. // SERIAL_ECHOLNPGM("clean up finished ");
  4011. bool apply_temp_comp = true;
  4012. #ifdef PINDA_THERMISTOR
  4013. apply_temp_comp = false;
  4014. #endif
  4015. if (apply_temp_comp)
  4016. if(temp_cal_active == true && calibration_status_pinda() == true) temp_compensation_apply(); //apply PINDA temperature compensation
  4017. babystep_apply(); // Apply Z height correction aka baby stepping before mesh bed leveing gets activated.
  4018. // SERIAL_ECHOLNPGM("babystep applied");
  4019. bool eeprom_bed_correction_valid = eeprom_read_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID) == 1;
  4020. #ifdef SUPPORT_VERBOSITY
  4021. if (verbosity_level >= 1) {
  4022. eeprom_bed_correction_valid ? SERIAL_PROTOCOLPGM("Bed correction data valid\n") : SERIAL_PROTOCOLPGM("Bed correction data not valid\n");
  4023. }
  4024. #endif // SUPPORT_VERBOSITY
  4025. for (uint8_t i = 0; i < 4; ++i) {
  4026. unsigned char codes[4] = { 'L', 'R', 'F', 'B' };
  4027. long correction = 0;
  4028. if (code_seen(codes[i]))
  4029. correction = code_value_long();
  4030. else if (eeprom_bed_correction_valid) {
  4031. unsigned char *addr = (i < 2) ?
  4032. ((i == 0) ? (unsigned char*)EEPROM_BED_CORRECTION_LEFT : (unsigned char*)EEPROM_BED_CORRECTION_RIGHT) :
  4033. ((i == 2) ? (unsigned char*)EEPROM_BED_CORRECTION_FRONT : (unsigned char*)EEPROM_BED_CORRECTION_REAR);
  4034. correction = eeprom_read_int8(addr);
  4035. }
  4036. if (correction == 0)
  4037. continue;
  4038. if (labs(correction) > BED_ADJUSTMENT_UM_MAX) {
  4039. SERIAL_ERROR_START;
  4040. SERIAL_ECHOPGM("Excessive bed leveling correction: ");
  4041. SERIAL_ECHO(correction);
  4042. SERIAL_ECHOLNPGM(" microns");
  4043. }
  4044. else {
  4045. float offset = float(correction) * 0.001f;
  4046. switch (i) {
  4047. case 0:
  4048. for (uint8_t row = 0; row < nMeasPoints; ++row) {
  4049. for (uint8_t col = 0; col < nMeasPoints - 1; ++col) {
  4050. mbl.z_values[row][col] += offset * (nMeasPoints - 1 - col) / (nMeasPoints - 1);
  4051. }
  4052. }
  4053. break;
  4054. case 1:
  4055. for (uint8_t row = 0; row < nMeasPoints; ++row) {
  4056. for (uint8_t col = 1; col < nMeasPoints; ++col) {
  4057. mbl.z_values[row][col] += offset * col / (nMeasPoints - 1);
  4058. }
  4059. }
  4060. break;
  4061. case 2:
  4062. for (uint8_t col = 0; col < nMeasPoints; ++col) {
  4063. for (uint8_t row = 0; row < nMeasPoints; ++row) {
  4064. mbl.z_values[row][col] += offset * (nMeasPoints - 1 - row) / (nMeasPoints - 1);
  4065. }
  4066. }
  4067. break;
  4068. case 3:
  4069. for (uint8_t col = 0; col < nMeasPoints; ++col) {
  4070. for (uint8_t row = 1; row < nMeasPoints; ++row) {
  4071. mbl.z_values[row][col] += offset * row / (nMeasPoints - 1);
  4072. }
  4073. }
  4074. break;
  4075. }
  4076. }
  4077. }
  4078. // SERIAL_ECHOLNPGM("Bed leveling correction finished");
  4079. if (nMeasPoints == 3) {
  4080. mbl.upsample_3x3(); //interpolation from 3x3 to 7x7 points using largrangian polynomials while using the same array z_values[iy][ix] for storing (just coppying measured data to new destination and interpolating between them)
  4081. }
  4082. /*
  4083. SERIAL_PROTOCOLPGM("Num X,Y: ");
  4084. SERIAL_PROTOCOL(MESH_NUM_X_POINTS);
  4085. SERIAL_PROTOCOLPGM(",");
  4086. SERIAL_PROTOCOL(MESH_NUM_Y_POINTS);
  4087. SERIAL_PROTOCOLPGM("\nZ search height: ");
  4088. SERIAL_PROTOCOL(MESH_HOME_Z_SEARCH);
  4089. SERIAL_PROTOCOLLNPGM("\nMeasured points:");
  4090. for (int y = MESH_NUM_Y_POINTS-1; y >= 0; y--) {
  4091. for (int x = 0; x < MESH_NUM_X_POINTS; x++) {
  4092. SERIAL_PROTOCOLPGM(" ");
  4093. SERIAL_PROTOCOL_F(mbl.z_values[y][x], 5);
  4094. }
  4095. SERIAL_PROTOCOLPGM("\n");
  4096. }
  4097. */
  4098. if (nMeasPoints == 7 && magnet_elimination) {
  4099. mbl_interpolation(nMeasPoints);
  4100. }
  4101. /*
  4102. SERIAL_PROTOCOLPGM("Num X,Y: ");
  4103. SERIAL_PROTOCOL(MESH_NUM_X_POINTS);
  4104. SERIAL_PROTOCOLPGM(",");
  4105. SERIAL_PROTOCOL(MESH_NUM_Y_POINTS);
  4106. SERIAL_PROTOCOLPGM("\nZ search height: ");
  4107. SERIAL_PROTOCOL(MESH_HOME_Z_SEARCH);
  4108. SERIAL_PROTOCOLLNPGM("\nMeasured points:");
  4109. for (int y = MESH_NUM_Y_POINTS-1; y >= 0; y--) {
  4110. for (int x = 0; x < MESH_NUM_X_POINTS; x++) {
  4111. SERIAL_PROTOCOLPGM(" ");
  4112. SERIAL_PROTOCOL_F(mbl.z_values[y][x], 5);
  4113. }
  4114. SERIAL_PROTOCOLPGM("\n");
  4115. }
  4116. */
  4117. // SERIAL_ECHOLNPGM("Upsample finished");
  4118. mbl.active = 1; //activate mesh bed leveling
  4119. // SERIAL_ECHOLNPGM("Mesh bed leveling activated");
  4120. go_home_with_z_lift();
  4121. // SERIAL_ECHOLNPGM("Go home finished");
  4122. //unretract (after PINDA preheat retraction)
  4123. if (degHotend(active_extruder) > EXTRUDE_MINTEMP && temp_cal_active == true && calibration_status_pinda() == true && target_temperature_bed >= 50) {
  4124. current_position[E_AXIS] += default_retraction;
  4125. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 400, active_extruder);
  4126. }
  4127. KEEPALIVE_STATE(NOT_BUSY);
  4128. // Restore custom message state
  4129. lcd_setstatuspgm(_T(WELCOME_MSG));
  4130. custom_message_type = custom_message_type_old;
  4131. custom_message_state = custom_message_state_old;
  4132. mesh_bed_leveling_flag = false;
  4133. mesh_bed_run_from_menu = false;
  4134. lcd_update(2);
  4135. }
  4136. break;
  4137. /**
  4138. * G81: Print mesh bed leveling status and bed profile if activated
  4139. */
  4140. case 81:
  4141. if (mbl.active) {
  4142. SERIAL_PROTOCOLPGM("Num X,Y: ");
  4143. SERIAL_PROTOCOL(MESH_NUM_X_POINTS);
  4144. SERIAL_PROTOCOLPGM(",");
  4145. SERIAL_PROTOCOL(MESH_NUM_Y_POINTS);
  4146. SERIAL_PROTOCOLPGM("\nZ search height: ");
  4147. SERIAL_PROTOCOL(MESH_HOME_Z_SEARCH);
  4148. SERIAL_PROTOCOLLNPGM("\nMeasured points:");
  4149. for (int y = MESH_NUM_Y_POINTS-1; y >= 0; y--) {
  4150. for (int x = 0; x < MESH_NUM_X_POINTS; x++) {
  4151. SERIAL_PROTOCOLPGM(" ");
  4152. SERIAL_PROTOCOL_F(mbl.z_values[y][x], 5);
  4153. }
  4154. SERIAL_PROTOCOLPGM("\n");
  4155. }
  4156. }
  4157. else
  4158. SERIAL_PROTOCOLLNPGM("Mesh bed leveling not active.");
  4159. break;
  4160. #if 0
  4161. /**
  4162. * G82: Single Z probe at current location
  4163. *
  4164. * WARNING! USE WITH CAUTION! If you'll try to probe where is no leveling pad, nasty things can happen!
  4165. *
  4166. */
  4167. case 82:
  4168. SERIAL_PROTOCOLLNPGM("Finding bed ");
  4169. int l_feedmultiply = setup_for_endstop_move();
  4170. find_bed_induction_sensor_point_z();
  4171. clean_up_after_endstop_move(l_feedmultiply);
  4172. SERIAL_PROTOCOLPGM("Bed found at: ");
  4173. SERIAL_PROTOCOL_F(current_position[Z_AXIS], 5);
  4174. SERIAL_PROTOCOLPGM("\n");
  4175. break;
  4176. /**
  4177. * G83: Prusa3D specific: Babystep in Z and store to EEPROM
  4178. */
  4179. case 83:
  4180. {
  4181. int babystepz = code_seen('S') ? code_value() : 0;
  4182. int BabyPosition = code_seen('P') ? code_value() : 0;
  4183. if (babystepz != 0) {
  4184. //FIXME Vojtech: What shall be the index of the axis Z: 3 or 4?
  4185. // Is the axis indexed starting with zero or one?
  4186. if (BabyPosition > 4) {
  4187. SERIAL_PROTOCOLLNPGM("Index out of bounds");
  4188. }else{
  4189. // Save it to the eeprom
  4190. babystepLoadZ = babystepz;
  4191. EEPROM_save_B(EEPROM_BABYSTEP_Z0+(BabyPosition*2),&babystepLoadZ);
  4192. // adjust the Z
  4193. babystepsTodoZadd(babystepLoadZ);
  4194. }
  4195. }
  4196. }
  4197. break;
  4198. /**
  4199. * G84: Prusa3D specific: UNDO Babystep Z (move Z axis back)
  4200. */
  4201. case 84:
  4202. babystepsTodoZsubtract(babystepLoadZ);
  4203. // babystepLoadZ = 0;
  4204. break;
  4205. /**
  4206. * G85: Prusa3D specific: Pick best babystep
  4207. */
  4208. case 85:
  4209. lcd_pick_babystep();
  4210. break;
  4211. #endif
  4212. /**
  4213. * G86: Prusa3D specific: Disable babystep correction after home.
  4214. * This G-code will be performed at the start of a calibration script.
  4215. */
  4216. case 86:
  4217. calibration_status_store(CALIBRATION_STATUS_LIVE_ADJUST);
  4218. break;
  4219. /**
  4220. * G87: Prusa3D specific: Enable babystep correction after home
  4221. * This G-code will be performed at the end of a calibration script.
  4222. */
  4223. case 87:
  4224. calibration_status_store(CALIBRATION_STATUS_CALIBRATED);
  4225. break;
  4226. /**
  4227. * G88: Prusa3D specific: Don't know what it is for, it is in V2Calibration.gcode
  4228. */
  4229. case 88:
  4230. break;
  4231. #endif // ENABLE_MESH_BED_LEVELING
  4232. case 90: // G90
  4233. relative_mode = false;
  4234. break;
  4235. case 91: // G91
  4236. relative_mode = true;
  4237. break;
  4238. case 92: // G92
  4239. if(!code_seen(axis_codes[E_AXIS]))
  4240. st_synchronize();
  4241. for(int8_t i=0; i < NUM_AXIS; i++) {
  4242. if(code_seen(axis_codes[i])) {
  4243. if(i == E_AXIS) {
  4244. current_position[i] = code_value();
  4245. plan_set_e_position(current_position[E_AXIS]);
  4246. }
  4247. else {
  4248. current_position[i] = code_value()+cs.add_homing[i];
  4249. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  4250. }
  4251. }
  4252. }
  4253. break;
  4254. case 98: //! G98 (activate farm mode)
  4255. farm_mode = 1;
  4256. PingTime = _millis();
  4257. eeprom_update_byte((unsigned char *)EEPROM_FARM_MODE, farm_mode);
  4258. EEPROM_save_B(EEPROM_FARM_NUMBER, &farm_no);
  4259. SilentModeMenu = SILENT_MODE_OFF;
  4260. eeprom_update_byte((unsigned char *)EEPROM_SILENT, SilentModeMenu);
  4261. break;
  4262. case 99: //! G99 (deactivate farm mode)
  4263. farm_mode = 0;
  4264. lcd_printer_connected();
  4265. eeprom_update_byte((unsigned char *)EEPROM_FARM_MODE, farm_mode);
  4266. lcd_update(2);
  4267. break;
  4268. default:
  4269. printf_P(PSTR("Unknown G code: %s \n"), cmdbuffer + bufindr + CMDHDRSIZE);
  4270. }
  4271. // printf_P(_N("END G-CODE=%u\n"), gcode_in_progress);
  4272. gcode_in_progress = 0;
  4273. } // end if(code_seen('G'))
  4274. else if(code_seen('M'))
  4275. {
  4276. int index;
  4277. for (index = 1; *(strchr_pointer + index) == ' ' || *(strchr_pointer + index) == '\t'; index++);
  4278. /*for (++strchr_pointer; *strchr_pointer == ' ' || *strchr_pointer == '\t'; ++strchr_pointer);*/
  4279. if (*(strchr_pointer+index) < '0' || *(strchr_pointer+index) > '9') {
  4280. printf_P(PSTR("Invalid M code: %s \n"), cmdbuffer + bufindr + CMDHDRSIZE);
  4281. } else
  4282. {
  4283. mcode_in_progress = (int)code_value();
  4284. // printf_P(_N("BEGIN M-CODE=%u\n"), mcode_in_progress);
  4285. switch(mcode_in_progress)
  4286. {
  4287. case 0: // M0 - Unconditional stop - Wait for user button press on LCD
  4288. case 1: // M1 - Conditional stop - Wait for user button press on LCD
  4289. {
  4290. char *src = strchr_pointer + 2;
  4291. codenum = 0;
  4292. bool hasP = false, hasS = false;
  4293. if (code_seen('P')) {
  4294. codenum = code_value(); // milliseconds to wait
  4295. hasP = codenum > 0;
  4296. }
  4297. if (code_seen('S')) {
  4298. codenum = code_value() * 1000; // seconds to wait
  4299. hasS = codenum > 0;
  4300. }
  4301. starpos = strchr(src, '*');
  4302. if (starpos != NULL) *(starpos) = '\0';
  4303. while (*src == ' ') ++src;
  4304. if (!hasP && !hasS && *src != '\0') {
  4305. lcd_setstatus(src);
  4306. } else {
  4307. LCD_MESSAGERPGM(_i("Wait for user..."));////MSG_USERWAIT
  4308. }
  4309. lcd_ignore_click(); //call lcd_ignore_click aslo for else ???
  4310. st_synchronize();
  4311. previous_millis_cmd = _millis();
  4312. if (codenum > 0){
  4313. codenum += _millis(); // keep track of when we started waiting
  4314. KEEPALIVE_STATE(PAUSED_FOR_USER);
  4315. while(_millis() < codenum && !lcd_clicked()){
  4316. manage_heater();
  4317. manage_inactivity(true);
  4318. lcd_update(0);
  4319. }
  4320. KEEPALIVE_STATE(IN_HANDLER);
  4321. lcd_ignore_click(false);
  4322. }else{
  4323. marlin_wait_for_click();
  4324. }
  4325. if (IS_SD_PRINTING)
  4326. LCD_MESSAGERPGM(_T(MSG_RESUMING_PRINT));
  4327. else
  4328. LCD_MESSAGERPGM(_T(WELCOME_MSG));
  4329. }
  4330. break;
  4331. case 17:
  4332. LCD_MESSAGERPGM(_i("No move."));////MSG_NO_MOVE
  4333. enable_x();
  4334. enable_y();
  4335. enable_z();
  4336. enable_e0();
  4337. enable_e1();
  4338. enable_e2();
  4339. break;
  4340. #ifdef SDSUPPORT
  4341. case 20: // M20 - list SD card
  4342. SERIAL_PROTOCOLLNRPGM(_N("Begin file list"));////MSG_BEGIN_FILE_LIST
  4343. card.ls();
  4344. SERIAL_PROTOCOLLNRPGM(_N("End file list"));////MSG_END_FILE_LIST
  4345. break;
  4346. case 21: // M21 - init SD card
  4347. card.initsd();
  4348. break;
  4349. case 22: //M22 - release SD card
  4350. card.release();
  4351. break;
  4352. case 23: //M23 - Select file
  4353. starpos = (strchr(strchr_pointer + 4,'*'));
  4354. if(starpos!=NULL)
  4355. *(starpos)='\0';
  4356. card.openFile(strchr_pointer + 4,true);
  4357. break;
  4358. case 24: //M24 - Start SD print
  4359. if (!card.paused)
  4360. failstats_reset_print();
  4361. card.startFileprint();
  4362. starttime=_millis();
  4363. break;
  4364. case 25: //M25 - Pause SD print
  4365. card.pauseSDPrint();
  4366. break;
  4367. case 26: //M26 - Set SD index
  4368. if(card.cardOK && code_seen('S')) {
  4369. card.setIndex(code_value_long());
  4370. }
  4371. break;
  4372. case 27: //M27 - Get SD status
  4373. card.getStatus();
  4374. break;
  4375. case 28: //M28 - Start SD write
  4376. starpos = (strchr(strchr_pointer + 4,'*'));
  4377. if(starpos != NULL){
  4378. char* npos = strchr(CMDBUFFER_CURRENT_STRING, 'N');
  4379. strchr_pointer = strchr(npos,' ') + 1;
  4380. *(starpos) = '\0';
  4381. }
  4382. card.openFile(strchr_pointer+4,false);
  4383. break;
  4384. case 29: //M29 - Stop SD write
  4385. //processed in write to file routine above
  4386. //card,saving = false;
  4387. break;
  4388. case 30: //M30 <filename> Delete File
  4389. if (card.cardOK){
  4390. card.closefile();
  4391. starpos = (strchr(strchr_pointer + 4,'*'));
  4392. if(starpos != NULL){
  4393. char* npos = strchr(CMDBUFFER_CURRENT_STRING, 'N');
  4394. strchr_pointer = strchr(npos,' ') + 1;
  4395. *(starpos) = '\0';
  4396. }
  4397. card.removeFile(strchr_pointer + 4);
  4398. }
  4399. break;
  4400. case 32: //M32 - Select file and start SD print
  4401. {
  4402. if(card.sdprinting) {
  4403. st_synchronize();
  4404. }
  4405. starpos = (strchr(strchr_pointer + 4,'*'));
  4406. char* namestartpos = (strchr(strchr_pointer + 4,'!')); //find ! to indicate filename string start.
  4407. if(namestartpos==NULL)
  4408. {
  4409. namestartpos=strchr_pointer + 4; //default name position, 4 letters after the M
  4410. }
  4411. else
  4412. namestartpos++; //to skip the '!'
  4413. if(starpos!=NULL)
  4414. *(starpos)='\0';
  4415. bool call_procedure=(code_seen('P'));
  4416. if(strchr_pointer>namestartpos)
  4417. call_procedure=false; //false alert, 'P' found within filename
  4418. if( card.cardOK )
  4419. {
  4420. card.openFile(namestartpos,true,!call_procedure);
  4421. if(code_seen('S'))
  4422. if(strchr_pointer<namestartpos) //only if "S" is occuring _before_ the filename
  4423. card.setIndex(code_value_long());
  4424. card.startFileprint();
  4425. if(!call_procedure)
  4426. starttime=_millis(); //procedure calls count as normal print time.
  4427. }
  4428. } break;
  4429. case 928: //M928 - Start SD write
  4430. starpos = (strchr(strchr_pointer + 5,'*'));
  4431. if(starpos != NULL){
  4432. char* npos = strchr(CMDBUFFER_CURRENT_STRING, 'N');
  4433. strchr_pointer = strchr(npos,' ') + 1;
  4434. *(starpos) = '\0';
  4435. }
  4436. card.openLogFile(strchr_pointer+5);
  4437. break;
  4438. #endif //SDSUPPORT
  4439. case 31: //M31 take time since the start of the SD print or an M109 command
  4440. {
  4441. stoptime=_millis();
  4442. char time[30];
  4443. unsigned long t=(stoptime-starttime)/1000;
  4444. int sec,min;
  4445. min=t/60;
  4446. sec=t%60;
  4447. sprintf_P(time, PSTR("%i min, %i sec"), min, sec);
  4448. SERIAL_ECHO_START;
  4449. SERIAL_ECHOLN(time);
  4450. lcd_setstatus(time);
  4451. autotempShutdown();
  4452. }
  4453. break;
  4454. case 42: //M42 -Change pin status via gcode
  4455. if (code_seen('S'))
  4456. {
  4457. int pin_status = code_value();
  4458. int pin_number = LED_PIN;
  4459. if (code_seen('P') && pin_status >= 0 && pin_status <= 255)
  4460. pin_number = code_value();
  4461. for(int8_t i = 0; i < (int8_t)(sizeof(sensitive_pins)/sizeof(int)); i++)
  4462. {
  4463. if (sensitive_pins[i] == pin_number)
  4464. {
  4465. pin_number = -1;
  4466. break;
  4467. }
  4468. }
  4469. #if defined(FAN_PIN) && FAN_PIN > -1
  4470. if (pin_number == FAN_PIN)
  4471. fanSpeed = pin_status;
  4472. #endif
  4473. if (pin_number > -1)
  4474. {
  4475. pinMode(pin_number, OUTPUT);
  4476. digitalWrite(pin_number, pin_status);
  4477. analogWrite(pin_number, pin_status);
  4478. }
  4479. }
  4480. break;
  4481. case 44: //! M44: Prusa3D: Reset the bed skew and offset calibration.
  4482. // Reset the baby step value and the baby step applied flag.
  4483. calibration_status_store(CALIBRATION_STATUS_ASSEMBLED);
  4484. eeprom_update_word((uint16_t*)EEPROM_BABYSTEP_Z, 0);
  4485. // Reset the skew and offset in both RAM and EEPROM.
  4486. reset_bed_offset_and_skew();
  4487. // Reset world2machine_rotation_and_skew and world2machine_shift, therefore
  4488. // the planner will not perform any adjustments in the XY plane.
  4489. // Wait for the motors to stop and update the current position with the absolute values.
  4490. world2machine_revert_to_uncorrected();
  4491. break;
  4492. case 45: //! M45: Prusa3D: bed skew and offset with manual Z up
  4493. {
  4494. int8_t verbosity_level = 0;
  4495. bool only_Z = code_seen('Z');
  4496. #ifdef SUPPORT_VERBOSITY
  4497. if (code_seen('V'))
  4498. {
  4499. // Just 'V' without a number counts as V1.
  4500. char c = strchr_pointer[1];
  4501. verbosity_level = (c == ' ' || c == '\t' || c == 0) ? 1 : code_value_short();
  4502. }
  4503. #endif //SUPPORT_VERBOSITY
  4504. gcode_M45(only_Z, verbosity_level);
  4505. }
  4506. break;
  4507. /*
  4508. case 46:
  4509. {
  4510. // M46: Prusa3D: Show the assigned IP address.
  4511. uint8_t ip[4];
  4512. bool hasIP = card.ToshibaFlashAir_GetIP(ip);
  4513. if (hasIP) {
  4514. SERIAL_ECHOPGM("Toshiba FlashAir current IP: ");
  4515. SERIAL_ECHO(int(ip[0]));
  4516. SERIAL_ECHOPGM(".");
  4517. SERIAL_ECHO(int(ip[1]));
  4518. SERIAL_ECHOPGM(".");
  4519. SERIAL_ECHO(int(ip[2]));
  4520. SERIAL_ECHOPGM(".");
  4521. SERIAL_ECHO(int(ip[3]));
  4522. SERIAL_ECHOLNPGM("");
  4523. } else {
  4524. SERIAL_ECHOLNPGM("Toshiba FlashAir GetIP failed");
  4525. }
  4526. break;
  4527. }
  4528. */
  4529. case 47:
  4530. //! M47: Prusa3D: Show end stops dialog on the display.
  4531. KEEPALIVE_STATE(PAUSED_FOR_USER);
  4532. lcd_diag_show_end_stops();
  4533. KEEPALIVE_STATE(IN_HANDLER);
  4534. break;
  4535. #if 0
  4536. case 48: //! M48: scan the bed induction sensor points, print the sensor trigger coordinates to the serial line for visualization on the PC.
  4537. {
  4538. // Disable the default update procedure of the display. We will do a modal dialog.
  4539. lcd_update_enable(false);
  4540. // Let the planner use the uncorrected coordinates.
  4541. mbl.reset();
  4542. // Reset world2machine_rotation_and_skew and world2machine_shift, therefore
  4543. // the planner will not perform any adjustments in the XY plane.
  4544. // Wait for the motors to stop and update the current position with the absolute values.
  4545. world2machine_revert_to_uncorrected();
  4546. // Move the print head close to the bed.
  4547. current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
  4548. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS],current_position[Z_AXIS] , current_position[E_AXIS], homing_feedrate[Z_AXIS]/40, active_extruder);
  4549. st_synchronize();
  4550. // Home in the XY plane.
  4551. set_destination_to_current();
  4552. int l_feedmultiply = setup_for_endstop_move();
  4553. home_xy();
  4554. int8_t verbosity_level = 0;
  4555. if (code_seen('V')) {
  4556. // Just 'V' without a number counts as V1.
  4557. char c = strchr_pointer[1];
  4558. verbosity_level = (c == ' ' || c == '\t' || c == 0) ? 1 : code_value_short();
  4559. }
  4560. bool success = scan_bed_induction_points(verbosity_level);
  4561. clean_up_after_endstop_move(l_feedmultiply);
  4562. // Print head up.
  4563. current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
  4564. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS],current_position[Z_AXIS] , current_position[E_AXIS], homing_feedrate[Z_AXIS]/40, active_extruder);
  4565. st_synchronize();
  4566. lcd_update_enable(true);
  4567. break;
  4568. }
  4569. #endif
  4570. #ifdef ENABLE_AUTO_BED_LEVELING
  4571. #ifdef Z_PROBE_REPEATABILITY_TEST
  4572. //! M48 Z-Probe repeatability measurement function.
  4573. //!
  4574. //! Usage: M48 <n #_samples> <X X_position_for_samples> <Y Y_position_for_samples> <V Verbose_Level> <L legs_of_movement_prior_to_doing_probe>
  4575. //!
  4576. //! This function assumes the bed has been homed. Specificaly, that a G28 command
  4577. //! as been issued prior to invoking the M48 Z-Probe repeatability measurement function.
  4578. //! Any information generated by a prior G29 Bed leveling command will be lost and need to be
  4579. //! regenerated.
  4580. //!
  4581. //! The number of samples will default to 10 if not specified. You can use upper or lower case
  4582. //! letters for any of the options EXCEPT n. n must be in lower case because Marlin uses a capital
  4583. //! N for its communication protocol and will get horribly confused if you send it a capital N.
  4584. //!
  4585. case 48: // M48 Z-Probe repeatability
  4586. {
  4587. #if Z_MIN_PIN == -1
  4588. #error "You must have a Z_MIN endstop in order to enable calculation of Z-Probe repeatability."
  4589. #endif
  4590. double sum=0.0;
  4591. double mean=0.0;
  4592. double sigma=0.0;
  4593. double sample_set[50];
  4594. int verbose_level=1, n=0, j, n_samples = 10, n_legs=0;
  4595. double X_current, Y_current, Z_current;
  4596. double X_probe_location, Y_probe_location, Z_start_location, ext_position;
  4597. if (code_seen('V') || code_seen('v')) {
  4598. verbose_level = code_value();
  4599. if (verbose_level<0 || verbose_level>4 ) {
  4600. SERIAL_PROTOCOLPGM("?Verbose Level not plausable.\n");
  4601. goto Sigma_Exit;
  4602. }
  4603. }
  4604. if (verbose_level > 0) {
  4605. SERIAL_PROTOCOLPGM("M48 Z-Probe Repeatability test. Version 2.00\n");
  4606. SERIAL_PROTOCOLPGM("Full support at: http://3dprintboard.com/forum.php\n");
  4607. }
  4608. if (code_seen('n')) {
  4609. n_samples = code_value();
  4610. if (n_samples<4 || n_samples>50 ) {
  4611. SERIAL_PROTOCOLPGM("?Specified sample size not plausable.\n");
  4612. goto Sigma_Exit;
  4613. }
  4614. }
  4615. X_current = X_probe_location = st_get_position_mm(X_AXIS);
  4616. Y_current = Y_probe_location = st_get_position_mm(Y_AXIS);
  4617. Z_current = st_get_position_mm(Z_AXIS);
  4618. Z_start_location = st_get_position_mm(Z_AXIS) + Z_RAISE_BEFORE_PROBING;
  4619. ext_position = st_get_position_mm(E_AXIS);
  4620. if (code_seen('X') || code_seen('x') ) {
  4621. X_probe_location = code_value() - X_PROBE_OFFSET_FROM_EXTRUDER;
  4622. if (X_probe_location<X_MIN_POS || X_probe_location>X_MAX_POS ) {
  4623. SERIAL_PROTOCOLPGM("?Specified X position out of range.\n");
  4624. goto Sigma_Exit;
  4625. }
  4626. }
  4627. if (code_seen('Y') || code_seen('y') ) {
  4628. Y_probe_location = code_value() - Y_PROBE_OFFSET_FROM_EXTRUDER;
  4629. if (Y_probe_location<Y_MIN_POS || Y_probe_location>Y_MAX_POS ) {
  4630. SERIAL_PROTOCOLPGM("?Specified Y position out of range.\n");
  4631. goto Sigma_Exit;
  4632. }
  4633. }
  4634. if (code_seen('L') || code_seen('l') ) {
  4635. n_legs = code_value();
  4636. if ( n_legs==1 )
  4637. n_legs = 2;
  4638. if ( n_legs<0 || n_legs>15 ) {
  4639. SERIAL_PROTOCOLPGM("?Specified number of legs in movement not plausable.\n");
  4640. goto Sigma_Exit;
  4641. }
  4642. }
  4643. //
  4644. // Do all the preliminary setup work. First raise the probe.
  4645. //
  4646. st_synchronize();
  4647. plan_bed_level_matrix.set_to_identity();
  4648. plan_buffer_line( X_current, Y_current, Z_start_location,
  4649. ext_position,
  4650. homing_feedrate[Z_AXIS]/60,
  4651. active_extruder);
  4652. st_synchronize();
  4653. //
  4654. // Now get everything to the specified probe point So we can safely do a probe to
  4655. // get us close to the bed. If the Z-Axis is far from the bed, we don't want to
  4656. // use that as a starting point for each probe.
  4657. //
  4658. if (verbose_level > 2)
  4659. SERIAL_PROTOCOL("Positioning probe for the test.\n");
  4660. plan_buffer_line( X_probe_location, Y_probe_location, Z_start_location,
  4661. ext_position,
  4662. homing_feedrate[X_AXIS]/60,
  4663. active_extruder);
  4664. st_synchronize();
  4665. current_position[X_AXIS] = X_current = st_get_position_mm(X_AXIS);
  4666. current_position[Y_AXIS] = Y_current = st_get_position_mm(Y_AXIS);
  4667. current_position[Z_AXIS] = Z_current = st_get_position_mm(Z_AXIS);
  4668. current_position[E_AXIS] = ext_position = st_get_position_mm(E_AXIS);
  4669. //
  4670. // OK, do the inital probe to get us close to the bed.
  4671. // Then retrace the right amount and use that in subsequent probes
  4672. //
  4673. int l_feedmultiply = setup_for_endstop_move();
  4674. run_z_probe();
  4675. current_position[Z_AXIS] = Z_current = st_get_position_mm(Z_AXIS);
  4676. Z_start_location = st_get_position_mm(Z_AXIS) + Z_RAISE_BEFORE_PROBING;
  4677. plan_buffer_line( X_probe_location, Y_probe_location, Z_start_location,
  4678. ext_position,
  4679. homing_feedrate[X_AXIS]/60,
  4680. active_extruder);
  4681. st_synchronize();
  4682. current_position[Z_AXIS] = Z_current = st_get_position_mm(Z_AXIS);
  4683. for( n=0; n<n_samples; n++) {
  4684. do_blocking_move_to( X_probe_location, Y_probe_location, Z_start_location); // Make sure we are at the probe location
  4685. if ( n_legs) {
  4686. double radius=0.0, theta=0.0, x_sweep, y_sweep;
  4687. int rotational_direction, l;
  4688. rotational_direction = (unsigned long) _millis() & 0x0001; // clockwise or counter clockwise
  4689. radius = (unsigned long) _millis() % (long) (X_MAX_LENGTH/4); // limit how far out to go
  4690. theta = (float) ((unsigned long) _millis() % (long) 360) / (360./(2*3.1415926)); // turn into radians
  4691. //SERIAL_ECHOPAIR("starting radius: ",radius);
  4692. //SERIAL_ECHOPAIR(" theta: ",theta);
  4693. //SERIAL_ECHOPAIR(" direction: ",rotational_direction);
  4694. //SERIAL_PROTOCOLLNPGM("");
  4695. for( l=0; l<n_legs-1; l++) {
  4696. if (rotational_direction==1)
  4697. theta += (float) ((unsigned long) _millis() % (long) 20) / (360.0/(2*3.1415926)); // turn into radians
  4698. else
  4699. theta -= (float) ((unsigned long) _millis() % (long) 20) / (360.0/(2*3.1415926)); // turn into radians
  4700. radius += (float) ( ((long) ((unsigned long) _millis() % (long) 10)) - 5);
  4701. if ( radius<0.0 )
  4702. radius = -radius;
  4703. X_current = X_probe_location + cos(theta) * radius;
  4704. Y_current = Y_probe_location + sin(theta) * radius;
  4705. if ( X_current<X_MIN_POS) // Make sure our X & Y are sane
  4706. X_current = X_MIN_POS;
  4707. if ( X_current>X_MAX_POS)
  4708. X_current = X_MAX_POS;
  4709. if ( Y_current<Y_MIN_POS) // Make sure our X & Y are sane
  4710. Y_current = Y_MIN_POS;
  4711. if ( Y_current>Y_MAX_POS)
  4712. Y_current = Y_MAX_POS;
  4713. if (verbose_level>3 ) {
  4714. SERIAL_ECHOPAIR("x: ", X_current);
  4715. SERIAL_ECHOPAIR("y: ", Y_current);
  4716. SERIAL_PROTOCOLLNPGM("");
  4717. }
  4718. do_blocking_move_to( X_current, Y_current, Z_current );
  4719. }
  4720. do_blocking_move_to( X_probe_location, Y_probe_location, Z_start_location); // Go back to the probe location
  4721. }
  4722. int l_feedmultiply = setup_for_endstop_move();
  4723. run_z_probe();
  4724. sample_set[n] = current_position[Z_AXIS];
  4725. //
  4726. // Get the current mean for the data points we have so far
  4727. //
  4728. sum=0.0;
  4729. for( j=0; j<=n; j++) {
  4730. sum = sum + sample_set[j];
  4731. }
  4732. mean = sum / (double (n+1));
  4733. //
  4734. // Now, use that mean to calculate the standard deviation for the
  4735. // data points we have so far
  4736. //
  4737. sum=0.0;
  4738. for( j=0; j<=n; j++) {
  4739. sum = sum + (sample_set[j]-mean) * (sample_set[j]-mean);
  4740. }
  4741. sigma = sqrt( sum / (double (n+1)) );
  4742. if (verbose_level > 1) {
  4743. SERIAL_PROTOCOL(n+1);
  4744. SERIAL_PROTOCOL(" of ");
  4745. SERIAL_PROTOCOL(n_samples);
  4746. SERIAL_PROTOCOLPGM(" z: ");
  4747. SERIAL_PROTOCOL_F(current_position[Z_AXIS], 6);
  4748. }
  4749. if (verbose_level > 2) {
  4750. SERIAL_PROTOCOL(" mean: ");
  4751. SERIAL_PROTOCOL_F(mean,6);
  4752. SERIAL_PROTOCOL(" sigma: ");
  4753. SERIAL_PROTOCOL_F(sigma,6);
  4754. }
  4755. if (verbose_level > 0)
  4756. SERIAL_PROTOCOLPGM("\n");
  4757. plan_buffer_line( X_probe_location, Y_probe_location, Z_start_location,
  4758. current_position[E_AXIS], homing_feedrate[Z_AXIS]/60, active_extruder);
  4759. st_synchronize();
  4760. }
  4761. _delay(1000);
  4762. clean_up_after_endstop_move(l_feedmultiply);
  4763. // enable_endstops(true);
  4764. if (verbose_level > 0) {
  4765. SERIAL_PROTOCOLPGM("Mean: ");
  4766. SERIAL_PROTOCOL_F(mean, 6);
  4767. SERIAL_PROTOCOLPGM("\n");
  4768. }
  4769. SERIAL_PROTOCOLPGM("Standard Deviation: ");
  4770. SERIAL_PROTOCOL_F(sigma, 6);
  4771. SERIAL_PROTOCOLPGM("\n\n");
  4772. Sigma_Exit:
  4773. break;
  4774. }
  4775. #endif // Z_PROBE_REPEATABILITY_TEST
  4776. #endif // ENABLE_AUTO_BED_LEVELING
  4777. case 73: //M73 show percent done and time remaining
  4778. if(code_seen('P')) print_percent_done_normal = code_value();
  4779. if(code_seen('R')) print_time_remaining_normal = code_value();
  4780. if(code_seen('Q')) print_percent_done_silent = code_value();
  4781. if(code_seen('S')) print_time_remaining_silent = code_value();
  4782. {
  4783. const char* _msg_mode_done_remain = _N("%S MODE: Percent done: %d; print time remaining in mins: %d\n");
  4784. printf_P(_msg_mode_done_remain, _N("NORMAL"), int(print_percent_done_normal), print_time_remaining_normal);
  4785. printf_P(_msg_mode_done_remain, _N("SILENT"), int(print_percent_done_silent), print_time_remaining_silent);
  4786. }
  4787. break;
  4788. case 104: // M104
  4789. {
  4790. uint8_t extruder;
  4791. if(setTargetedHotend(104,extruder)){
  4792. break;
  4793. }
  4794. if (code_seen('S'))
  4795. {
  4796. setTargetHotendSafe(code_value(), extruder);
  4797. }
  4798. setWatch();
  4799. break;
  4800. }
  4801. case 112: // M112 -Emergency Stop
  4802. kill(_n(""), 3);
  4803. break;
  4804. case 140: // M140 set bed temp
  4805. if (code_seen('S')) setTargetBed(code_value());
  4806. break;
  4807. case 105 : // M105
  4808. {
  4809. uint8_t extruder;
  4810. if(setTargetedHotend(105, extruder)){
  4811. break;
  4812. }
  4813. #if defined(TEMP_0_PIN) && TEMP_0_PIN > -1
  4814. SERIAL_PROTOCOLPGM("ok T:");
  4815. SERIAL_PROTOCOL_F(degHotend(extruder),1);
  4816. SERIAL_PROTOCOLPGM(" /");
  4817. SERIAL_PROTOCOL_F(degTargetHotend(extruder),1);
  4818. #if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1
  4819. SERIAL_PROTOCOLPGM(" B:");
  4820. SERIAL_PROTOCOL_F(degBed(),1);
  4821. SERIAL_PROTOCOLPGM(" /");
  4822. SERIAL_PROTOCOL_F(degTargetBed(),1);
  4823. #endif //TEMP_BED_PIN
  4824. for (int8_t cur_extruder = 0; cur_extruder < EXTRUDERS; ++cur_extruder) {
  4825. SERIAL_PROTOCOLPGM(" T");
  4826. SERIAL_PROTOCOL(cur_extruder);
  4827. SERIAL_PROTOCOLPGM(":");
  4828. SERIAL_PROTOCOL_F(degHotend(cur_extruder),1);
  4829. SERIAL_PROTOCOLPGM(" /");
  4830. SERIAL_PROTOCOL_F(degTargetHotend(cur_extruder),1);
  4831. }
  4832. #else
  4833. SERIAL_ERROR_START;
  4834. SERIAL_ERRORLNRPGM(_i("No thermistors - no temperature"));////MSG_ERR_NO_THERMISTORS
  4835. #endif
  4836. SERIAL_PROTOCOLPGM(" @:");
  4837. #ifdef EXTRUDER_WATTS
  4838. SERIAL_PROTOCOL((EXTRUDER_WATTS * getHeaterPower(tmp_extruder))/127);
  4839. SERIAL_PROTOCOLPGM("W");
  4840. #else
  4841. SERIAL_PROTOCOL(getHeaterPower(extruder));
  4842. #endif
  4843. SERIAL_PROTOCOLPGM(" B@:");
  4844. #ifdef BED_WATTS
  4845. SERIAL_PROTOCOL((BED_WATTS * getHeaterPower(-1))/127);
  4846. SERIAL_PROTOCOLPGM("W");
  4847. #else
  4848. SERIAL_PROTOCOL(getHeaterPower(-1));
  4849. #endif
  4850. #ifdef PINDA_THERMISTOR
  4851. SERIAL_PROTOCOLPGM(" P:");
  4852. SERIAL_PROTOCOL_F(current_temperature_pinda,1);
  4853. #endif //PINDA_THERMISTOR
  4854. #ifdef AMBIENT_THERMISTOR
  4855. SERIAL_PROTOCOLPGM(" A:");
  4856. SERIAL_PROTOCOL_F(current_temperature_ambient,1);
  4857. #endif //AMBIENT_THERMISTOR
  4858. #ifdef SHOW_TEMP_ADC_VALUES
  4859. {float raw = 0.0;
  4860. #if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1
  4861. SERIAL_PROTOCOLPGM(" ADC B:");
  4862. SERIAL_PROTOCOL_F(degBed(),1);
  4863. SERIAL_PROTOCOLPGM("C->");
  4864. raw = rawBedTemp();
  4865. SERIAL_PROTOCOL_F(raw/OVERSAMPLENR,5);
  4866. SERIAL_PROTOCOLPGM(" Rb->");
  4867. SERIAL_PROTOCOL_F(100 * (1 + (PtA * (raw/OVERSAMPLENR)) + (PtB * sq((raw/OVERSAMPLENR)))), 5);
  4868. SERIAL_PROTOCOLPGM(" Rxb->");
  4869. SERIAL_PROTOCOL_F(raw, 5);
  4870. #endif
  4871. for (int8_t cur_extruder = 0; cur_extruder < EXTRUDERS; ++cur_extruder) {
  4872. SERIAL_PROTOCOLPGM(" T");
  4873. SERIAL_PROTOCOL(cur_extruder);
  4874. SERIAL_PROTOCOLPGM(":");
  4875. SERIAL_PROTOCOL_F(degHotend(cur_extruder),1);
  4876. SERIAL_PROTOCOLPGM("C->");
  4877. raw = rawHotendTemp(cur_extruder);
  4878. SERIAL_PROTOCOL_F(raw/OVERSAMPLENR,5);
  4879. SERIAL_PROTOCOLPGM(" Rt");
  4880. SERIAL_PROTOCOL(cur_extruder);
  4881. SERIAL_PROTOCOLPGM("->");
  4882. SERIAL_PROTOCOL_F(100 * (1 + (PtA * (raw/OVERSAMPLENR)) + (PtB * sq((raw/OVERSAMPLENR)))), 5);
  4883. SERIAL_PROTOCOLPGM(" Rx");
  4884. SERIAL_PROTOCOL(cur_extruder);
  4885. SERIAL_PROTOCOLPGM("->");
  4886. SERIAL_PROTOCOL_F(raw, 5);
  4887. }}
  4888. #endif
  4889. SERIAL_PROTOCOLLN("");
  4890. KEEPALIVE_STATE(NOT_BUSY);
  4891. return;
  4892. break;
  4893. }
  4894. case 109:
  4895. {// M109 - Wait for extruder heater to reach target.
  4896. uint8_t extruder;
  4897. if(setTargetedHotend(109, extruder)){
  4898. break;
  4899. }
  4900. LCD_MESSAGERPGM(_T(MSG_HEATING));
  4901. heating_status = 1;
  4902. if (farm_mode) { prusa_statistics(1); };
  4903. #ifdef AUTOTEMP
  4904. autotemp_enabled=false;
  4905. #endif
  4906. if (code_seen('S')) {
  4907. setTargetHotendSafe(code_value(), extruder);
  4908. CooldownNoWait = true;
  4909. } else if (code_seen('R')) {
  4910. setTargetHotendSafe(code_value(), extruder);
  4911. CooldownNoWait = false;
  4912. }
  4913. #ifdef AUTOTEMP
  4914. if (code_seen('S')) autotemp_min=code_value();
  4915. if (code_seen('B')) autotemp_max=code_value();
  4916. if (code_seen('F'))
  4917. {
  4918. autotemp_factor=code_value();
  4919. autotemp_enabled=true;
  4920. }
  4921. #endif
  4922. setWatch();
  4923. codenum = _millis();
  4924. /* See if we are heating up or cooling down */
  4925. target_direction = isHeatingHotend(extruder); // true if heating, false if cooling
  4926. KEEPALIVE_STATE(NOT_BUSY);
  4927. cancel_heatup = false;
  4928. wait_for_heater(codenum, extruder); //loops until target temperature is reached
  4929. LCD_MESSAGERPGM(_T(MSG_HEATING_COMPLETE));
  4930. KEEPALIVE_STATE(IN_HANDLER);
  4931. heating_status = 2;
  4932. if (farm_mode) { prusa_statistics(2); };
  4933. //starttime=_millis();
  4934. previous_millis_cmd = _millis();
  4935. }
  4936. break;
  4937. case 190: // M190 - Wait for bed heater to reach target.
  4938. #if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1
  4939. LCD_MESSAGERPGM(_T(MSG_BED_HEATING));
  4940. heating_status = 3;
  4941. if (farm_mode) { prusa_statistics(1); };
  4942. if (code_seen('S'))
  4943. {
  4944. setTargetBed(code_value());
  4945. CooldownNoWait = true;
  4946. }
  4947. else if (code_seen('R'))
  4948. {
  4949. setTargetBed(code_value());
  4950. CooldownNoWait = false;
  4951. }
  4952. codenum = _millis();
  4953. cancel_heatup = false;
  4954. target_direction = isHeatingBed(); // true if heating, false if cooling
  4955. KEEPALIVE_STATE(NOT_BUSY);
  4956. while ( (target_direction)&&(!cancel_heatup) ? (isHeatingBed()) : (isCoolingBed()&&(CooldownNoWait==false)) )
  4957. {
  4958. if(( _millis() - codenum) > 1000 ) //Print Temp Reading every 1 second while heating up.
  4959. {
  4960. if (!farm_mode) {
  4961. float tt = degHotend(active_extruder);
  4962. SERIAL_PROTOCOLPGM("T:");
  4963. SERIAL_PROTOCOL(tt);
  4964. SERIAL_PROTOCOLPGM(" E:");
  4965. SERIAL_PROTOCOL((int)active_extruder);
  4966. SERIAL_PROTOCOLPGM(" B:");
  4967. SERIAL_PROTOCOL_F(degBed(), 1);
  4968. SERIAL_PROTOCOLLN("");
  4969. }
  4970. codenum = _millis();
  4971. }
  4972. manage_heater();
  4973. manage_inactivity();
  4974. lcd_update(0);
  4975. }
  4976. LCD_MESSAGERPGM(_T(MSG_BED_DONE));
  4977. KEEPALIVE_STATE(IN_HANDLER);
  4978. heating_status = 4;
  4979. previous_millis_cmd = _millis();
  4980. #endif
  4981. break;
  4982. #if defined(FAN_PIN) && FAN_PIN > -1
  4983. case 106: //!M106 Sxxx Fan On S<speed> 0 .. 255
  4984. if (code_seen('S')){
  4985. fanSpeed=constrain(code_value(),0,255);
  4986. }
  4987. else {
  4988. fanSpeed=255;
  4989. }
  4990. break;
  4991. case 107: //M107 Fan Off
  4992. fanSpeed = 0;
  4993. break;
  4994. #endif //FAN_PIN
  4995. #if defined(PS_ON_PIN) && PS_ON_PIN > -1
  4996. case 80: // M80 - Turn on Power Supply
  4997. SET_OUTPUT(PS_ON_PIN); //GND
  4998. WRITE(PS_ON_PIN, PS_ON_AWAKE);
  4999. // If you have a switch on suicide pin, this is useful
  5000. // if you want to start another print with suicide feature after
  5001. // a print without suicide...
  5002. #if defined SUICIDE_PIN && SUICIDE_PIN > -1
  5003. SET_OUTPUT(SUICIDE_PIN);
  5004. WRITE(SUICIDE_PIN, HIGH);
  5005. #endif
  5006. powersupply = true;
  5007. LCD_MESSAGERPGM(_T(WELCOME_MSG));
  5008. lcd_update(0);
  5009. break;
  5010. #endif
  5011. case 81: // M81 - Turn off Power Supply
  5012. disable_heater();
  5013. st_synchronize();
  5014. disable_e0();
  5015. disable_e1();
  5016. disable_e2();
  5017. finishAndDisableSteppers();
  5018. fanSpeed = 0;
  5019. _delay(1000); // Wait a little before to switch off
  5020. #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1
  5021. st_synchronize();
  5022. suicide();
  5023. #elif defined(PS_ON_PIN) && PS_ON_PIN > -1
  5024. SET_OUTPUT(PS_ON_PIN);
  5025. WRITE(PS_ON_PIN, PS_ON_ASLEEP);
  5026. #endif
  5027. powersupply = false;
  5028. LCD_MESSAGERPGM(CAT4(CUSTOM_MENDEL_NAME,PSTR(" "),MSG_OFF,PSTR(".")));
  5029. lcd_update(0);
  5030. break;
  5031. case 82:
  5032. axis_relative_modes[3] = false;
  5033. break;
  5034. case 83:
  5035. axis_relative_modes[3] = true;
  5036. break;
  5037. case 18: //compatibility
  5038. case 84: // M84
  5039. if(code_seen('S')){
  5040. stepper_inactive_time = code_value() * 1000;
  5041. }
  5042. else
  5043. {
  5044. bool all_axis = !((code_seen(axis_codes[X_AXIS])) || (code_seen(axis_codes[Y_AXIS])) || (code_seen(axis_codes[Z_AXIS]))|| (code_seen(axis_codes[E_AXIS])));
  5045. if(all_axis)
  5046. {
  5047. st_synchronize();
  5048. disable_e0();
  5049. disable_e1();
  5050. disable_e2();
  5051. finishAndDisableSteppers();
  5052. }
  5053. else
  5054. {
  5055. st_synchronize();
  5056. if (code_seen('X')) disable_x();
  5057. if (code_seen('Y')) disable_y();
  5058. if (code_seen('Z')) disable_z();
  5059. #if ((E0_ENABLE_PIN != X_ENABLE_PIN) && (E1_ENABLE_PIN != Y_ENABLE_PIN)) // Only enable on boards that have seperate ENABLE_PINS
  5060. if (code_seen('E')) {
  5061. disable_e0();
  5062. disable_e1();
  5063. disable_e2();
  5064. }
  5065. #endif
  5066. }
  5067. }
  5068. //in the end of print set estimated time to end of print and extruders used during print to default values for next print
  5069. print_time_remaining_init();
  5070. snmm_filaments_used = 0;
  5071. break;
  5072. case 85: // M85
  5073. if(code_seen('S')) {
  5074. max_inactive_time = code_value() * 1000;
  5075. }
  5076. break;
  5077. #ifdef SAFETYTIMER
  5078. case 86: // M86 - set safety timer expiration time in seconds; M86 S0 will disable safety timer
  5079. //when safety timer expires heatbed and nozzle target temperatures are set to zero
  5080. if (code_seen('S')) {
  5081. safetytimer_inactive_time = code_value() * 1000;
  5082. safetyTimer.start();
  5083. }
  5084. break;
  5085. #endif
  5086. case 92: // M92
  5087. for(int8_t i=0; i < NUM_AXIS; i++)
  5088. {
  5089. if(code_seen(axis_codes[i]))
  5090. {
  5091. if(i == 3) { // E
  5092. float value = code_value();
  5093. if(value < 20.0) {
  5094. float factor = cs.axis_steps_per_unit[i] / value; // increase e constants if M92 E14 is given for netfab.
  5095. cs.max_jerk[E_AXIS] *= factor;
  5096. max_feedrate[i] *= factor;
  5097. axis_steps_per_sqr_second[i] *= factor;
  5098. }
  5099. cs.axis_steps_per_unit[i] = value;
  5100. }
  5101. else {
  5102. cs.axis_steps_per_unit[i] = code_value();
  5103. }
  5104. }
  5105. }
  5106. break;
  5107. case 110: //! M110 N<line number> - reset line pos
  5108. if (code_seen('N'))
  5109. gcode_LastN = code_value_long();
  5110. break;
  5111. case 113: // M113 - Get or set Host Keepalive interval
  5112. if (code_seen('S')) {
  5113. host_keepalive_interval = (uint8_t)code_value_short();
  5114. // NOMORE(host_keepalive_interval, 60);
  5115. }
  5116. else {
  5117. SERIAL_ECHO_START;
  5118. SERIAL_ECHOPAIR("M113 S", (unsigned long)host_keepalive_interval);
  5119. SERIAL_PROTOCOLLN("");
  5120. }
  5121. break;
  5122. case 115: // M115
  5123. if (code_seen('V')) {
  5124. // Report the Prusa version number.
  5125. SERIAL_PROTOCOLLNRPGM(FW_VERSION_STR_P());
  5126. } else if (code_seen('U')) {
  5127. // Check the firmware version provided. If the firmware version provided by the U code is higher than the currently running firmware,
  5128. // pause the print and ask the user to upgrade the firmware.
  5129. show_upgrade_dialog_if_version_newer(++ strchr_pointer);
  5130. } else {
  5131. SERIAL_ECHOPGM("FIRMWARE_NAME:Prusa-Firmware ");
  5132. SERIAL_ECHORPGM(FW_VERSION_STR_P());
  5133. SERIAL_ECHOPGM(" based on Marlin FIRMWARE_URL:https://github.com/prusa3d/Prusa-Firmware PROTOCOL_VERSION:");
  5134. SERIAL_ECHOPGM(PROTOCOL_VERSION);
  5135. SERIAL_ECHOPGM(" MACHINE_TYPE:");
  5136. SERIAL_ECHOPGM(CUSTOM_MENDEL_NAME);
  5137. SERIAL_ECHOPGM(" EXTRUDER_COUNT:");
  5138. SERIAL_ECHOPGM(STRINGIFY(EXTRUDERS));
  5139. SERIAL_ECHOPGM(" UUID:");
  5140. SERIAL_ECHOLNPGM(MACHINE_UUID);
  5141. }
  5142. break;
  5143. /* case 117: // M117 display message
  5144. starpos = (strchr(strchr_pointer + 5,'*'));
  5145. if(starpos!=NULL)
  5146. *(starpos)='\0';
  5147. lcd_setstatus(strchr_pointer + 5);
  5148. break;*/
  5149. case 114: // M114
  5150. gcode_M114();
  5151. break;
  5152. case 120: //! M120 - Disable endstops
  5153. enable_endstops(false) ;
  5154. break;
  5155. case 121: //! M121 - Enable endstops
  5156. enable_endstops(true) ;
  5157. break;
  5158. case 119: // M119
  5159. SERIAL_PROTOCOLRPGM(_N("Reporting endstop status"));////MSG_M119_REPORT
  5160. SERIAL_PROTOCOLLN("");
  5161. #if defined(X_MIN_PIN) && X_MIN_PIN > -1
  5162. SERIAL_PROTOCOLRPGM(_n("x_min: "));////MSG_X_MIN
  5163. if(READ(X_MIN_PIN)^X_MIN_ENDSTOP_INVERTING){
  5164. SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT);
  5165. }else{
  5166. SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
  5167. }
  5168. SERIAL_PROTOCOLLN("");
  5169. #endif
  5170. #if defined(X_MAX_PIN) && X_MAX_PIN > -1
  5171. SERIAL_PROTOCOLRPGM(_n("x_max: "));////MSG_X_MAX
  5172. if(READ(X_MAX_PIN)^X_MAX_ENDSTOP_INVERTING){
  5173. SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT);
  5174. }else{
  5175. SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
  5176. }
  5177. SERIAL_PROTOCOLLN("");
  5178. #endif
  5179. #if defined(Y_MIN_PIN) && Y_MIN_PIN > -1
  5180. SERIAL_PROTOCOLRPGM(_n("y_min: "));////MSG_Y_MIN
  5181. if(READ(Y_MIN_PIN)^Y_MIN_ENDSTOP_INVERTING){
  5182. SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT);
  5183. }else{
  5184. SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
  5185. }
  5186. SERIAL_PROTOCOLLN("");
  5187. #endif
  5188. #if defined(Y_MAX_PIN) && Y_MAX_PIN > -1
  5189. SERIAL_PROTOCOLRPGM(_n("y_max: "));////MSG_Y_MAX
  5190. if(READ(Y_MAX_PIN)^Y_MAX_ENDSTOP_INVERTING){
  5191. SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT);
  5192. }else{
  5193. SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
  5194. }
  5195. SERIAL_PROTOCOLLN("");
  5196. #endif
  5197. #if defined(Z_MIN_PIN) && Z_MIN_PIN > -1
  5198. SERIAL_PROTOCOLRPGM(MSG_Z_MIN);
  5199. if(READ(Z_MIN_PIN)^Z_MIN_ENDSTOP_INVERTING){
  5200. SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT);
  5201. }else{
  5202. SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
  5203. }
  5204. SERIAL_PROTOCOLLN("");
  5205. #endif
  5206. #if defined(Z_MAX_PIN) && Z_MAX_PIN > -1
  5207. SERIAL_PROTOCOLRPGM(MSG_Z_MAX);
  5208. if(READ(Z_MAX_PIN)^Z_MAX_ENDSTOP_INVERTING){
  5209. SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT);
  5210. }else{
  5211. SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
  5212. }
  5213. SERIAL_PROTOCOLLN("");
  5214. #endif
  5215. break;
  5216. //TODO: update for all axis, use for loop
  5217. #ifdef BLINKM
  5218. case 150: // M150
  5219. {
  5220. byte red;
  5221. byte grn;
  5222. byte blu;
  5223. if(code_seen('R')) red = code_value();
  5224. if(code_seen('U')) grn = code_value();
  5225. if(code_seen('B')) blu = code_value();
  5226. SendColors(red,grn,blu);
  5227. }
  5228. break;
  5229. #endif //BLINKM
  5230. case 200: // M200 D<millimeters> set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).
  5231. {
  5232. uint8_t extruder = active_extruder;
  5233. if(code_seen('T')) {
  5234. extruder = code_value();
  5235. if(extruder >= EXTRUDERS) {
  5236. SERIAL_ECHO_START;
  5237. SERIAL_ECHO(_n("M200 Invalid extruder "));////MSG_M200_INVALID_EXTRUDER
  5238. break;
  5239. }
  5240. }
  5241. if(code_seen('D')) {
  5242. float diameter = (float)code_value();
  5243. if (diameter == 0.0) {
  5244. // setting any extruder filament size disables volumetric on the assumption that
  5245. // slicers either generate in extruder values as cubic mm or as as filament feeds
  5246. // for all extruders
  5247. cs.volumetric_enabled = false;
  5248. } else {
  5249. cs.filament_size[extruder] = (float)code_value();
  5250. // make sure all extruders have some sane value for the filament size
  5251. cs.filament_size[0] = (cs.filament_size[0] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : cs.filament_size[0]);
  5252. #if EXTRUDERS > 1
  5253. cs.filament_size[1] = (cs.filament_size[1] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : cs.filament_size[1]);
  5254. #if EXTRUDERS > 2
  5255. cs.filament_size[2] = (cs.filament_size[2] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : cs.filament_size[2]);
  5256. #endif
  5257. #endif
  5258. cs.volumetric_enabled = true;
  5259. }
  5260. } else {
  5261. //reserved for setting filament diameter via UFID or filament measuring device
  5262. break;
  5263. }
  5264. calculate_extruder_multipliers();
  5265. }
  5266. break;
  5267. case 201: // M201
  5268. for (int8_t i = 0; i < NUM_AXIS; i++)
  5269. {
  5270. if (code_seen(axis_codes[i]))
  5271. {
  5272. unsigned long val = code_value();
  5273. #ifdef TMC2130
  5274. unsigned long val_silent = val;
  5275. if ((i == X_AXIS) || (i == Y_AXIS))
  5276. {
  5277. if (val > NORMAL_MAX_ACCEL_XY)
  5278. val = NORMAL_MAX_ACCEL_XY;
  5279. if (val_silent > SILENT_MAX_ACCEL_XY)
  5280. val_silent = SILENT_MAX_ACCEL_XY;
  5281. }
  5282. cs.max_acceleration_units_per_sq_second_normal[i] = val;
  5283. cs.max_acceleration_units_per_sq_second_silent[i] = val_silent;
  5284. #else //TMC2130
  5285. max_acceleration_units_per_sq_second[i] = val;
  5286. #endif //TMC2130
  5287. }
  5288. }
  5289. // steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner)
  5290. reset_acceleration_rates();
  5291. break;
  5292. #if 0 // Not used for Sprinter/grbl gen6
  5293. case 202: // M202
  5294. for(int8_t i=0; i < NUM_AXIS; i++) {
  5295. if(code_seen(axis_codes[i])) axis_travel_steps_per_sqr_second[i] = code_value() * cs.axis_steps_per_unit[i];
  5296. }
  5297. break;
  5298. #endif
  5299. case 203: // M203 max feedrate mm/sec
  5300. for (int8_t i = 0; i < NUM_AXIS; i++)
  5301. {
  5302. if (code_seen(axis_codes[i]))
  5303. {
  5304. float val = code_value();
  5305. #ifdef TMC2130
  5306. float val_silent = val;
  5307. if ((i == X_AXIS) || (i == Y_AXIS))
  5308. {
  5309. if (val > NORMAL_MAX_FEEDRATE_XY)
  5310. val = NORMAL_MAX_FEEDRATE_XY;
  5311. if (val_silent > SILENT_MAX_FEEDRATE_XY)
  5312. val_silent = SILENT_MAX_FEEDRATE_XY;
  5313. }
  5314. cs.max_feedrate_normal[i] = val;
  5315. cs.max_feedrate_silent[i] = val_silent;
  5316. #else //TMC2130
  5317. max_feedrate[i] = val;
  5318. #endif //TMC2130
  5319. }
  5320. }
  5321. break;
  5322. case 204:
  5323. //! M204 acclereration settings.
  5324. //!@n Supporting old format: M204 S[normal moves] T[filmanent only moves]
  5325. //!@n and new format: M204 P[printing moves] R[filmanent only moves] T[travel moves] (as of now T is ignored)
  5326. {
  5327. if(code_seen('S')) {
  5328. // Legacy acceleration format. This format is used by the legacy Marlin, MK2 or MK3 firmware,
  5329. // and it is also generated by Slic3r to control acceleration per extrusion type
  5330. // (there is a separate acceleration settings in Slicer for perimeter, first layer etc).
  5331. cs.acceleration = code_value();
  5332. // Interpret the T value as retract acceleration in the old Marlin format.
  5333. if(code_seen('T'))
  5334. cs.retract_acceleration = code_value();
  5335. } else {
  5336. // New acceleration format, compatible with the upstream Marlin.
  5337. if(code_seen('P'))
  5338. cs.acceleration = code_value();
  5339. if(code_seen('R'))
  5340. cs.retract_acceleration = code_value();
  5341. if(code_seen('T')) {
  5342. // Interpret the T value as the travel acceleration in the new Marlin format.
  5343. //FIXME Prusa3D firmware currently does not support travel acceleration value independent from the extruding acceleration value.
  5344. // travel_acceleration = code_value();
  5345. }
  5346. }
  5347. }
  5348. break;
  5349. case 205: //M205 advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk
  5350. {
  5351. if(code_seen('S')) cs.minimumfeedrate = code_value();
  5352. if(code_seen('T')) cs.mintravelfeedrate = code_value();
  5353. if(code_seen('B')) cs.minsegmenttime = code_value() ;
  5354. if(code_seen('X')) cs.max_jerk[X_AXIS] = cs.max_jerk[Y_AXIS] = code_value();
  5355. if(code_seen('Y')) cs.max_jerk[Y_AXIS] = code_value();
  5356. if(code_seen('Z')) cs.max_jerk[Z_AXIS] = code_value();
  5357. if(code_seen('E')) cs.max_jerk[E_AXIS] = code_value();
  5358. if (cs.max_jerk[X_AXIS] > DEFAULT_XJERK) cs.max_jerk[X_AXIS] = DEFAULT_XJERK;
  5359. if (cs.max_jerk[Y_AXIS] > DEFAULT_YJERK) cs.max_jerk[Y_AXIS] = DEFAULT_YJERK;
  5360. }
  5361. break;
  5362. case 206: // M206 additional homing offset
  5363. for(int8_t i=0; i < 3; i++)
  5364. {
  5365. if(code_seen(axis_codes[i])) cs.add_homing[i] = code_value();
  5366. }
  5367. break;
  5368. #ifdef FWRETRACT
  5369. case 207: //M207 - set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop]
  5370. {
  5371. if(code_seen('S'))
  5372. {
  5373. cs.retract_length = code_value() ;
  5374. }
  5375. if(code_seen('F'))
  5376. {
  5377. cs.retract_feedrate = code_value()/60 ;
  5378. }
  5379. if(code_seen('Z'))
  5380. {
  5381. cs.retract_zlift = code_value() ;
  5382. }
  5383. }break;
  5384. case 208: // M208 - set retract recover length S[positive mm surplus to the M207 S*] F[feedrate mm/min]
  5385. {
  5386. if(code_seen('S'))
  5387. {
  5388. cs.retract_recover_length = code_value() ;
  5389. }
  5390. if(code_seen('F'))
  5391. {
  5392. cs.retract_recover_feedrate = code_value()/60 ;
  5393. }
  5394. }break;
  5395. case 209: // M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction.
  5396. {
  5397. if(code_seen('S'))
  5398. {
  5399. int t= code_value() ;
  5400. switch(t)
  5401. {
  5402. case 0:
  5403. {
  5404. cs.autoretract_enabled=false;
  5405. retracted[0]=false;
  5406. #if EXTRUDERS > 1
  5407. retracted[1]=false;
  5408. #endif
  5409. #if EXTRUDERS > 2
  5410. retracted[2]=false;
  5411. #endif
  5412. }break;
  5413. case 1:
  5414. {
  5415. cs.autoretract_enabled=true;
  5416. retracted[0]=false;
  5417. #if EXTRUDERS > 1
  5418. retracted[1]=false;
  5419. #endif
  5420. #if EXTRUDERS > 2
  5421. retracted[2]=false;
  5422. #endif
  5423. }break;
  5424. default:
  5425. SERIAL_ECHO_START;
  5426. SERIAL_ECHORPGM(MSG_UNKNOWN_COMMAND);
  5427. SERIAL_ECHO(CMDBUFFER_CURRENT_STRING);
  5428. SERIAL_ECHOLNPGM("\"(1)");
  5429. }
  5430. }
  5431. }break;
  5432. #endif // FWRETRACT
  5433. #if EXTRUDERS > 1
  5434. case 218: // M218 - set hotend offset (in mm), T<extruder_number> X<offset_on_X> Y<offset_on_Y>
  5435. {
  5436. uint8_t extruder;
  5437. if(setTargetedHotend(218, extruder)){
  5438. break;
  5439. }
  5440. if(code_seen('X'))
  5441. {
  5442. extruder_offset[X_AXIS][extruder] = code_value();
  5443. }
  5444. if(code_seen('Y'))
  5445. {
  5446. extruder_offset[Y_AXIS][extruder] = code_value();
  5447. }
  5448. SERIAL_ECHO_START;
  5449. SERIAL_ECHORPGM(MSG_HOTEND_OFFSET);
  5450. for(extruder = 0; extruder < EXTRUDERS; extruder++)
  5451. {
  5452. SERIAL_ECHO(" ");
  5453. SERIAL_ECHO(extruder_offset[X_AXIS][extruder]);
  5454. SERIAL_ECHO(",");
  5455. SERIAL_ECHO(extruder_offset[Y_AXIS][extruder]);
  5456. }
  5457. SERIAL_ECHOLN("");
  5458. }break;
  5459. #endif
  5460. case 220: // M220 S<factor in percent>- set speed factor override percentage
  5461. {
  5462. if (code_seen('B')) //backup current speed factor
  5463. {
  5464. saved_feedmultiply_mm = feedmultiply;
  5465. }
  5466. if(code_seen('S'))
  5467. {
  5468. feedmultiply = code_value() ;
  5469. }
  5470. if (code_seen('R')) { //restore previous feedmultiply
  5471. feedmultiply = saved_feedmultiply_mm;
  5472. }
  5473. }
  5474. break;
  5475. case 221: // M221 S<factor in percent>- set extrude factor override percentage
  5476. {
  5477. if(code_seen('S'))
  5478. {
  5479. int tmp_code = code_value();
  5480. if (code_seen('T'))
  5481. {
  5482. uint8_t extruder;
  5483. if(setTargetedHotend(221, extruder)){
  5484. break;
  5485. }
  5486. extruder_multiply[extruder] = tmp_code;
  5487. }
  5488. else
  5489. {
  5490. extrudemultiply = tmp_code ;
  5491. }
  5492. }
  5493. calculate_extruder_multipliers();
  5494. }
  5495. break;
  5496. case 226: // M226 P<pin number> S<pin state>- Wait until the specified pin reaches the state required
  5497. {
  5498. if(code_seen('P')){
  5499. int pin_number = code_value(); // pin number
  5500. int pin_state = -1; // required pin state - default is inverted
  5501. if(code_seen('S')) pin_state = code_value(); // required pin state
  5502. if(pin_state >= -1 && pin_state <= 1){
  5503. for(int8_t i = 0; i < (int8_t)(sizeof(sensitive_pins)/sizeof(int)); i++)
  5504. {
  5505. if (sensitive_pins[i] == pin_number)
  5506. {
  5507. pin_number = -1;
  5508. break;
  5509. }
  5510. }
  5511. if (pin_number > -1)
  5512. {
  5513. int target = LOW;
  5514. st_synchronize();
  5515. pinMode(pin_number, INPUT);
  5516. switch(pin_state){
  5517. case 1:
  5518. target = HIGH;
  5519. break;
  5520. case 0:
  5521. target = LOW;
  5522. break;
  5523. case -1:
  5524. target = !digitalRead(pin_number);
  5525. break;
  5526. }
  5527. while(digitalRead(pin_number) != target){
  5528. manage_heater();
  5529. manage_inactivity();
  5530. lcd_update(0);
  5531. }
  5532. }
  5533. }
  5534. }
  5535. }
  5536. break;
  5537. #if NUM_SERVOS > 0
  5538. case 280: // M280 - set servo position absolute. P: servo index, S: angle or microseconds
  5539. {
  5540. int servo_index = -1;
  5541. int servo_position = 0;
  5542. if (code_seen('P'))
  5543. servo_index = code_value();
  5544. if (code_seen('S')) {
  5545. servo_position = code_value();
  5546. if ((servo_index >= 0) && (servo_index < NUM_SERVOS)) {
  5547. #if defined (ENABLE_AUTO_BED_LEVELING) && (PROBE_SERVO_DEACTIVATION_DELAY > 0)
  5548. servos[servo_index].attach(0);
  5549. #endif
  5550. servos[servo_index].write(servo_position);
  5551. #if defined (ENABLE_AUTO_BED_LEVELING) && (PROBE_SERVO_DEACTIVATION_DELAY > 0)
  5552. _delay(PROBE_SERVO_DEACTIVATION_DELAY);
  5553. servos[servo_index].detach();
  5554. #endif
  5555. }
  5556. else {
  5557. SERIAL_ECHO_START;
  5558. SERIAL_ECHO("Servo ");
  5559. SERIAL_ECHO(servo_index);
  5560. SERIAL_ECHOLN(" out of range");
  5561. }
  5562. }
  5563. else if (servo_index >= 0) {
  5564. SERIAL_PROTOCOL(MSG_OK);
  5565. SERIAL_PROTOCOL(" Servo ");
  5566. SERIAL_PROTOCOL(servo_index);
  5567. SERIAL_PROTOCOL(": ");
  5568. SERIAL_PROTOCOL(servos[servo_index].read());
  5569. SERIAL_PROTOCOLLN("");
  5570. }
  5571. }
  5572. break;
  5573. #endif // NUM_SERVOS > 0
  5574. #if (LARGE_FLASH == true && ( BEEPER > 0 || defined(ULTRALCD) || defined(LCD_USE_I2C_BUZZER)))
  5575. case 300: // M300
  5576. {
  5577. int beepS = code_seen('S') ? code_value() : 110;
  5578. int beepP = code_seen('P') ? code_value() : 1000;
  5579. if (beepS > 0)
  5580. {
  5581. #if BEEPER > 0
  5582. if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
  5583. _tone(BEEPER, beepS);
  5584. _delay(beepP);
  5585. _noTone(BEEPER);
  5586. #endif
  5587. }
  5588. else
  5589. {
  5590. _delay(beepP);
  5591. }
  5592. }
  5593. break;
  5594. #endif // M300
  5595. #ifdef PIDTEMP
  5596. case 301: // M301
  5597. {
  5598. if(code_seen('P')) cs.Kp = code_value();
  5599. if(code_seen('I')) cs.Ki = scalePID_i(code_value());
  5600. if(code_seen('D')) cs.Kd = scalePID_d(code_value());
  5601. #ifdef PID_ADD_EXTRUSION_RATE
  5602. if(code_seen('C')) Kc = code_value();
  5603. #endif
  5604. updatePID();
  5605. SERIAL_PROTOCOLRPGM(MSG_OK);
  5606. SERIAL_PROTOCOL(" p:");
  5607. SERIAL_PROTOCOL(cs.Kp);
  5608. SERIAL_PROTOCOL(" i:");
  5609. SERIAL_PROTOCOL(unscalePID_i(cs.Ki));
  5610. SERIAL_PROTOCOL(" d:");
  5611. SERIAL_PROTOCOL(unscalePID_d(cs.Kd));
  5612. #ifdef PID_ADD_EXTRUSION_RATE
  5613. SERIAL_PROTOCOL(" c:");
  5614. //Kc does not have scaling applied above, or in resetting defaults
  5615. SERIAL_PROTOCOL(Kc);
  5616. #endif
  5617. SERIAL_PROTOCOLLN("");
  5618. }
  5619. break;
  5620. #endif //PIDTEMP
  5621. #ifdef PIDTEMPBED
  5622. case 304: // M304
  5623. {
  5624. if(code_seen('P')) cs.bedKp = code_value();
  5625. if(code_seen('I')) cs.bedKi = scalePID_i(code_value());
  5626. if(code_seen('D')) cs.bedKd = scalePID_d(code_value());
  5627. updatePID();
  5628. SERIAL_PROTOCOLRPGM(MSG_OK);
  5629. SERIAL_PROTOCOL(" p:");
  5630. SERIAL_PROTOCOL(cs.bedKp);
  5631. SERIAL_PROTOCOL(" i:");
  5632. SERIAL_PROTOCOL(unscalePID_i(cs.bedKi));
  5633. SERIAL_PROTOCOL(" d:");
  5634. SERIAL_PROTOCOL(unscalePID_d(cs.bedKd));
  5635. SERIAL_PROTOCOLLN("");
  5636. }
  5637. break;
  5638. #endif //PIDTEMP
  5639. case 240: // M240 Triggers a camera by emulating a Canon RC-1 : http://www.doc-diy.net/photo/rc-1_hacked/
  5640. {
  5641. #ifdef CHDK
  5642. SET_OUTPUT(CHDK);
  5643. WRITE(CHDK, HIGH);
  5644. chdkHigh = _millis();
  5645. chdkActive = true;
  5646. #else
  5647. #if defined(PHOTOGRAPH_PIN) && PHOTOGRAPH_PIN > -1
  5648. const uint8_t NUM_PULSES=16;
  5649. const float PULSE_LENGTH=0.01524;
  5650. for(int i=0; i < NUM_PULSES; i++) {
  5651. WRITE(PHOTOGRAPH_PIN, HIGH);
  5652. _delay_ms(PULSE_LENGTH);
  5653. WRITE(PHOTOGRAPH_PIN, LOW);
  5654. _delay_ms(PULSE_LENGTH);
  5655. }
  5656. _delay(7.33);
  5657. for(int i=0; i < NUM_PULSES; i++) {
  5658. WRITE(PHOTOGRAPH_PIN, HIGH);
  5659. _delay_ms(PULSE_LENGTH);
  5660. WRITE(PHOTOGRAPH_PIN, LOW);
  5661. _delay_ms(PULSE_LENGTH);
  5662. }
  5663. #endif
  5664. #endif //chdk end if
  5665. }
  5666. break;
  5667. #ifdef PREVENT_DANGEROUS_EXTRUDE
  5668. case 302: // allow cold extrudes, or set the minimum extrude temperature
  5669. {
  5670. float temp = .0;
  5671. if (code_seen('S')) temp=code_value();
  5672. set_extrude_min_temp(temp);
  5673. }
  5674. break;
  5675. #endif
  5676. case 303: // M303 PID autotune
  5677. {
  5678. float temp = 150.0;
  5679. int e=0;
  5680. int c=5;
  5681. if (code_seen('E')) e=code_value();
  5682. if (e<0)
  5683. temp=70;
  5684. if (code_seen('S')) temp=code_value();
  5685. if (code_seen('C')) c=code_value();
  5686. PID_autotune(temp, e, c);
  5687. }
  5688. break;
  5689. case 400: // M400 finish all moves
  5690. {
  5691. st_synchronize();
  5692. }
  5693. break;
  5694. case 403: //! M403 set filament type (material) for particular extruder and send this information to mmu
  5695. {
  5696. //! currently three different materials are needed (default, flex and PVA)
  5697. //! add storing this information for different load/unload profiles etc. in the future
  5698. //!firmware does not wait for "ok" from mmu
  5699. if (mmu_enabled)
  5700. {
  5701. uint8_t extruder = 255;
  5702. uint8_t filament = FILAMENT_UNDEFINED;
  5703. if(code_seen('E')) extruder = code_value();
  5704. if(code_seen('F')) filament = code_value();
  5705. mmu_set_filament_type(extruder, filament);
  5706. }
  5707. }
  5708. break;
  5709. case 500: // M500 Store settings in EEPROM
  5710. {
  5711. Config_StoreSettings();
  5712. }
  5713. break;
  5714. case 501: // M501 Read settings from EEPROM
  5715. {
  5716. Config_RetrieveSettings();
  5717. }
  5718. break;
  5719. case 502: // M502 Revert to default settings
  5720. {
  5721. Config_ResetDefault();
  5722. }
  5723. break;
  5724. case 503: // M503 print settings currently in memory
  5725. {
  5726. Config_PrintSettings();
  5727. }
  5728. break;
  5729. case 509: //M509 Force language selection
  5730. {
  5731. lang_reset();
  5732. SERIAL_ECHO_START;
  5733. SERIAL_PROTOCOLPGM(("LANG SEL FORCED"));
  5734. }
  5735. break;
  5736. #ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
  5737. case 540:
  5738. {
  5739. if(code_seen('S')) abort_on_endstop_hit = code_value() > 0;
  5740. }
  5741. break;
  5742. #endif
  5743. #ifdef CUSTOM_M_CODE_SET_Z_PROBE_OFFSET
  5744. case CUSTOM_M_CODE_SET_Z_PROBE_OFFSET:
  5745. {
  5746. float value;
  5747. if (code_seen('Z'))
  5748. {
  5749. value = code_value();
  5750. if ((Z_PROBE_OFFSET_RANGE_MIN <= value) && (value <= Z_PROBE_OFFSET_RANGE_MAX))
  5751. {
  5752. cs.zprobe_zoffset = -value; // compare w/ line 278 of ConfigurationStore.cpp
  5753. SERIAL_ECHO_START;
  5754. SERIAL_ECHOLNRPGM(CAT4(MSG_ZPROBE_ZOFFSET, " ", MSG_OK,PSTR("")));
  5755. SERIAL_PROTOCOLLN("");
  5756. }
  5757. else
  5758. {
  5759. SERIAL_ECHO_START;
  5760. SERIAL_ECHORPGM(MSG_ZPROBE_ZOFFSET);
  5761. SERIAL_ECHORPGM(MSG_Z_MIN);
  5762. SERIAL_ECHO(Z_PROBE_OFFSET_RANGE_MIN);
  5763. SERIAL_ECHORPGM(MSG_Z_MAX);
  5764. SERIAL_ECHO(Z_PROBE_OFFSET_RANGE_MAX);
  5765. SERIAL_PROTOCOLLN("");
  5766. }
  5767. }
  5768. else
  5769. {
  5770. SERIAL_ECHO_START;
  5771. SERIAL_ECHOLNRPGM(CAT2(MSG_ZPROBE_ZOFFSET, PSTR(" : ")));
  5772. SERIAL_ECHO(-cs.zprobe_zoffset);
  5773. SERIAL_PROTOCOLLN("");
  5774. }
  5775. break;
  5776. }
  5777. #endif // CUSTOM_M_CODE_SET_Z_PROBE_OFFSET
  5778. #ifdef FILAMENTCHANGEENABLE
  5779. case 600: //Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
  5780. {
  5781. st_synchronize();
  5782. float x_position = current_position[X_AXIS];
  5783. float y_position = current_position[Y_AXIS];
  5784. float z_shift = 0;
  5785. float e_shift_init = 0;
  5786. float e_shift_late = 0;
  5787. bool automatic = false;
  5788. //Retract extruder
  5789. if(code_seen('E'))
  5790. {
  5791. e_shift_init = code_value();
  5792. }
  5793. else
  5794. {
  5795. #ifdef FILAMENTCHANGE_FIRSTRETRACT
  5796. e_shift_init = FILAMENTCHANGE_FIRSTRETRACT ;
  5797. #endif
  5798. }
  5799. //currently don't work as we are using the same unload sequence as in M702, needs re-work
  5800. if (code_seen('L'))
  5801. {
  5802. e_shift_late = code_value();
  5803. }
  5804. else
  5805. {
  5806. #ifdef FILAMENTCHANGE_FINALRETRACT
  5807. e_shift_late = FILAMENTCHANGE_FINALRETRACT;
  5808. #endif
  5809. }
  5810. //Lift Z
  5811. if(code_seen('Z'))
  5812. {
  5813. z_shift = code_value();
  5814. }
  5815. else
  5816. {
  5817. #ifdef FILAMENTCHANGE_ZADD
  5818. z_shift= FILAMENTCHANGE_ZADD ;
  5819. if(current_position[Z_AXIS] < 25) z_shift+= 25 ;
  5820. #endif
  5821. }
  5822. //Move XY to side
  5823. if(code_seen('X'))
  5824. {
  5825. x_position = code_value();
  5826. }
  5827. else
  5828. {
  5829. #ifdef FILAMENTCHANGE_XPOS
  5830. x_position = FILAMENTCHANGE_XPOS;
  5831. #endif
  5832. }
  5833. if(code_seen('Y'))
  5834. {
  5835. y_position = code_value();
  5836. }
  5837. else
  5838. {
  5839. #ifdef FILAMENTCHANGE_YPOS
  5840. y_position = FILAMENTCHANGE_YPOS ;
  5841. #endif
  5842. }
  5843. if (mmu_enabled && code_seen("AUTO"))
  5844. automatic = true;
  5845. gcode_M600(automatic, x_position, y_position, z_shift, e_shift_init, e_shift_late);
  5846. }
  5847. break;
  5848. #endif //FILAMENTCHANGEENABLE
  5849. case 601: //! M601 - Pause print
  5850. {
  5851. cmdqueue_pop_front(); //trick because we want skip this command (M601) after restore
  5852. lcd_pause_print();
  5853. }
  5854. break;
  5855. case 602: { //! M602 - Resume print
  5856. lcd_resume_print();
  5857. }
  5858. break;
  5859. #ifdef PINDA_THERMISTOR
  5860. case 860: // M860 - Wait for PINDA thermistor to reach target temperature.
  5861. {
  5862. int set_target_pinda = 0;
  5863. if (code_seen('S')) {
  5864. set_target_pinda = code_value();
  5865. }
  5866. else {
  5867. break;
  5868. }
  5869. LCD_MESSAGERPGM(_T(MSG_PLEASE_WAIT));
  5870. SERIAL_PROTOCOLPGM("Wait for PINDA target temperature:");
  5871. SERIAL_PROTOCOL(set_target_pinda);
  5872. SERIAL_PROTOCOLLN("");
  5873. codenum = _millis();
  5874. cancel_heatup = false;
  5875. bool is_pinda_cooling = false;
  5876. if ((degTargetBed() == 0) && (degTargetHotend(0) == 0)) {
  5877. is_pinda_cooling = true;
  5878. }
  5879. while ( ((!is_pinda_cooling) && (!cancel_heatup) && (current_temperature_pinda < set_target_pinda)) || (is_pinda_cooling && (current_temperature_pinda > set_target_pinda)) ) {
  5880. if ((_millis() - codenum) > 1000) //Print Temp Reading every 1 second while waiting.
  5881. {
  5882. SERIAL_PROTOCOLPGM("P:");
  5883. SERIAL_PROTOCOL_F(current_temperature_pinda, 1);
  5884. SERIAL_PROTOCOLPGM("/");
  5885. SERIAL_PROTOCOL(set_target_pinda);
  5886. SERIAL_PROTOCOLLN("");
  5887. codenum = _millis();
  5888. }
  5889. manage_heater();
  5890. manage_inactivity();
  5891. lcd_update(0);
  5892. }
  5893. LCD_MESSAGERPGM(MSG_OK);
  5894. break;
  5895. }
  5896. case 861: // M861 - Set/Read PINDA temperature compensation offsets
  5897. if (code_seen('?')) { // ? - Print out current EEPROM offset values
  5898. uint8_t cal_status = calibration_status_pinda();
  5899. int16_t usteps = 0;
  5900. cal_status ? SERIAL_PROTOCOLLN("PINDA cal status: 1") : SERIAL_PROTOCOLLN("PINDA cal status: 0");
  5901. SERIAL_PROTOCOLLN("index, temp, ustep, um");
  5902. for (uint8_t i = 0; i < 6; i++)
  5903. {
  5904. if(i>0) EEPROM_read_B(EEPROM_PROBE_TEMP_SHIFT + (i-1) * 2, &usteps);
  5905. float mm = ((float)usteps) / cs.axis_steps_per_unit[Z_AXIS];
  5906. i == 0 ? SERIAL_PROTOCOLPGM("n/a") : SERIAL_PROTOCOL(i - 1);
  5907. SERIAL_PROTOCOLPGM(", ");
  5908. SERIAL_PROTOCOL(35 + (i * 5));
  5909. SERIAL_PROTOCOLPGM(", ");
  5910. SERIAL_PROTOCOL(usteps);
  5911. SERIAL_PROTOCOLPGM(", ");
  5912. SERIAL_PROTOCOL(mm * 1000);
  5913. SERIAL_PROTOCOLLN("");
  5914. }
  5915. }
  5916. else if (code_seen('!')) { // ! - Set factory default values
  5917. eeprom_write_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 1);
  5918. int16_t z_shift = 8; //40C - 20um - 8usteps
  5919. EEPROM_save_B(EEPROM_PROBE_TEMP_SHIFT, &z_shift);
  5920. z_shift = 24; //45C - 60um - 24usteps
  5921. EEPROM_save_B(EEPROM_PROBE_TEMP_SHIFT + 2, &z_shift);
  5922. z_shift = 48; //50C - 120um - 48usteps
  5923. EEPROM_save_B(EEPROM_PROBE_TEMP_SHIFT + 4, &z_shift);
  5924. z_shift = 80; //55C - 200um - 80usteps
  5925. EEPROM_save_B(EEPROM_PROBE_TEMP_SHIFT + 6, &z_shift);
  5926. z_shift = 120; //60C - 300um - 120usteps
  5927. EEPROM_save_B(EEPROM_PROBE_TEMP_SHIFT + 8, &z_shift);
  5928. SERIAL_PROTOCOLLN("factory restored");
  5929. }
  5930. else if (code_seen('Z')) { // Z - Set all values to 0 (effectively disabling PINDA temperature compensation)
  5931. eeprom_write_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 1);
  5932. int16_t z_shift = 0;
  5933. for (uint8_t i = 0; i < 5; i++) EEPROM_save_B(EEPROM_PROBE_TEMP_SHIFT + i * 2, &z_shift);
  5934. SERIAL_PROTOCOLLN("zerorized");
  5935. }
  5936. else if (code_seen('S')) { // Sxxx Iyyy - Set compensation ustep value S for compensation table index I
  5937. int16_t usteps = code_value();
  5938. if (code_seen('I')) {
  5939. uint8_t index = code_value();
  5940. if (index < 5) {
  5941. EEPROM_save_B(EEPROM_PROBE_TEMP_SHIFT + index * 2, &usteps);
  5942. SERIAL_PROTOCOLLN("OK");
  5943. SERIAL_PROTOCOLLN("index, temp, ustep, um");
  5944. for (uint8_t i = 0; i < 6; i++)
  5945. {
  5946. usteps = 0;
  5947. if (i>0) EEPROM_read_B(EEPROM_PROBE_TEMP_SHIFT + (i - 1) * 2, &usteps);
  5948. float mm = ((float)usteps) / cs.axis_steps_per_unit[Z_AXIS];
  5949. i == 0 ? SERIAL_PROTOCOLPGM("n/a") : SERIAL_PROTOCOL(i - 1);
  5950. SERIAL_PROTOCOLPGM(", ");
  5951. SERIAL_PROTOCOL(35 + (i * 5));
  5952. SERIAL_PROTOCOLPGM(", ");
  5953. SERIAL_PROTOCOL(usteps);
  5954. SERIAL_PROTOCOLPGM(", ");
  5955. SERIAL_PROTOCOL(mm * 1000);
  5956. SERIAL_PROTOCOLLN("");
  5957. }
  5958. }
  5959. }
  5960. }
  5961. else {
  5962. SERIAL_PROTOCOLPGM("no valid command");
  5963. }
  5964. break;
  5965. #endif //PINDA_THERMISTOR
  5966. #ifdef LIN_ADVANCE
  5967. case 900: // M900: Set LIN_ADVANCE options.
  5968. gcode_M900();
  5969. break;
  5970. #endif
  5971. case 907: // M907 Set digital trimpot motor current using axis codes.
  5972. {
  5973. #ifdef TMC2130
  5974. for (int i = 0; i < NUM_AXIS; i++)
  5975. if(code_seen(axis_codes[i]))
  5976. {
  5977. long cur_mA = code_value_long();
  5978. uint8_t val = tmc2130_cur2val(cur_mA);
  5979. tmc2130_set_current_h(i, val);
  5980. tmc2130_set_current_r(i, val);
  5981. //if (i == E_AXIS) printf_P(PSTR("E-axis current=%ldmA\n"), cur_mA);
  5982. }
  5983. #else //TMC2130
  5984. #if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
  5985. for(int i=0;i<NUM_AXIS;i++) if(code_seen(axis_codes[i])) st_current_set(i,code_value());
  5986. if(code_seen('B')) st_current_set(4,code_value());
  5987. if(code_seen('S')) for(int i=0;i<=4;i++) st_current_set(i,code_value());
  5988. #endif
  5989. #ifdef MOTOR_CURRENT_PWM_XY_PIN
  5990. if(code_seen('X')) st_current_set(0, code_value());
  5991. #endif
  5992. #ifdef MOTOR_CURRENT_PWM_Z_PIN
  5993. if(code_seen('Z')) st_current_set(1, code_value());
  5994. #endif
  5995. #ifdef MOTOR_CURRENT_PWM_E_PIN
  5996. if(code_seen('E')) st_current_set(2, code_value());
  5997. #endif
  5998. #endif //TMC2130
  5999. }
  6000. break;
  6001. case 908: // M908 Control digital trimpot directly.
  6002. {
  6003. #if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
  6004. uint8_t channel,current;
  6005. if(code_seen('P')) channel=code_value();
  6006. if(code_seen('S')) current=code_value();
  6007. digitalPotWrite(channel, current);
  6008. #endif
  6009. }
  6010. break;
  6011. #ifdef TMC2130_SERVICE_CODES_M910_M918
  6012. case 910: //! M910 - TMC2130 init
  6013. {
  6014. tmc2130_init();
  6015. }
  6016. break;
  6017. case 911: //! M911 - Set TMC2130 holding currents
  6018. {
  6019. if (code_seen('X')) tmc2130_set_current_h(0, code_value());
  6020. if (code_seen('Y')) tmc2130_set_current_h(1, code_value());
  6021. if (code_seen('Z')) tmc2130_set_current_h(2, code_value());
  6022. if (code_seen('E')) tmc2130_set_current_h(3, code_value());
  6023. }
  6024. break;
  6025. case 912: //! M912 - Set TMC2130 running currents
  6026. {
  6027. if (code_seen('X')) tmc2130_set_current_r(0, code_value());
  6028. if (code_seen('Y')) tmc2130_set_current_r(1, code_value());
  6029. if (code_seen('Z')) tmc2130_set_current_r(2, code_value());
  6030. if (code_seen('E')) tmc2130_set_current_r(3, code_value());
  6031. }
  6032. break;
  6033. case 913: //! M913 - Print TMC2130 currents
  6034. {
  6035. tmc2130_print_currents();
  6036. }
  6037. break;
  6038. case 914: //! M914 - Set normal mode
  6039. {
  6040. tmc2130_mode = TMC2130_MODE_NORMAL;
  6041. update_mode_profile();
  6042. tmc2130_init();
  6043. }
  6044. break;
  6045. case 915: //! M915 - Set silent mode
  6046. {
  6047. tmc2130_mode = TMC2130_MODE_SILENT;
  6048. update_mode_profile();
  6049. tmc2130_init();
  6050. }
  6051. break;
  6052. case 916: //! M916 - Set sg_thrs
  6053. {
  6054. if (code_seen('X')) tmc2130_sg_thr[X_AXIS] = code_value();
  6055. if (code_seen('Y')) tmc2130_sg_thr[Y_AXIS] = code_value();
  6056. if (code_seen('Z')) tmc2130_sg_thr[Z_AXIS] = code_value();
  6057. if (code_seen('E')) tmc2130_sg_thr[E_AXIS] = code_value();
  6058. for (uint8_t a = X_AXIS; a <= E_AXIS; a++)
  6059. printf_P(_N("tmc2130_sg_thr[%c]=%d\n"), "XYZE"[a], tmc2130_sg_thr[a]);
  6060. }
  6061. break;
  6062. case 917: //! M917 - Set TMC2130 pwm_ampl
  6063. {
  6064. if (code_seen('X')) tmc2130_set_pwm_ampl(0, code_value());
  6065. if (code_seen('Y')) tmc2130_set_pwm_ampl(1, code_value());
  6066. if (code_seen('Z')) tmc2130_set_pwm_ampl(2, code_value());
  6067. if (code_seen('E')) tmc2130_set_pwm_ampl(3, code_value());
  6068. }
  6069. break;
  6070. case 918: //! M918 - Set TMC2130 pwm_grad
  6071. {
  6072. if (code_seen('X')) tmc2130_set_pwm_grad(0, code_value());
  6073. if (code_seen('Y')) tmc2130_set_pwm_grad(1, code_value());
  6074. if (code_seen('Z')) tmc2130_set_pwm_grad(2, code_value());
  6075. if (code_seen('E')) tmc2130_set_pwm_grad(3, code_value());
  6076. }
  6077. break;
  6078. #endif //TMC2130_SERVICE_CODES_M910_M918
  6079. case 350: //! M350 - Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers.
  6080. {
  6081. #ifdef TMC2130
  6082. if(code_seen('E'))
  6083. {
  6084. uint16_t res_new = code_value();
  6085. if ((res_new == 8) || (res_new == 16) || (res_new == 32) || (res_new == 64) || (res_new == 128))
  6086. {
  6087. st_synchronize();
  6088. uint8_t axis = E_AXIS;
  6089. uint16_t res = tmc2130_get_res(axis);
  6090. tmc2130_set_res(axis, res_new);
  6091. cs.axis_ustep_resolution[axis] = res_new;
  6092. if (res_new > res)
  6093. {
  6094. uint16_t fac = (res_new / res);
  6095. cs.axis_steps_per_unit[axis] *= fac;
  6096. position[E_AXIS] *= fac;
  6097. }
  6098. else
  6099. {
  6100. uint16_t fac = (res / res_new);
  6101. cs.axis_steps_per_unit[axis] /= fac;
  6102. position[E_AXIS] /= fac;
  6103. }
  6104. }
  6105. }
  6106. #else //TMC2130
  6107. #if defined(X_MS1_PIN) && X_MS1_PIN > -1
  6108. if(code_seen('S')) for(int i=0;i<=4;i++) microstep_mode(i,code_value());
  6109. for(int i=0;i<NUM_AXIS;i++) if(code_seen(axis_codes[i])) microstep_mode(i,(uint8_t)code_value());
  6110. if(code_seen('B')) microstep_mode(4,code_value());
  6111. microstep_readings();
  6112. #endif
  6113. #endif //TMC2130
  6114. }
  6115. break;
  6116. case 351: //! M351 - Toggle MS1 MS2 pins directly, S# determines MS1 or MS2, X# sets the pin high/low.
  6117. {
  6118. #if defined(X_MS1_PIN) && X_MS1_PIN > -1
  6119. if(code_seen('S')) switch((int)code_value())
  6120. {
  6121. case 1:
  6122. for(int i=0;i<NUM_AXIS;i++) if(code_seen(axis_codes[i])) microstep_ms(i,code_value(),-1);
  6123. if(code_seen('B')) microstep_ms(4,code_value(),-1);
  6124. break;
  6125. case 2:
  6126. for(int i=0;i<NUM_AXIS;i++) if(code_seen(axis_codes[i])) microstep_ms(i,-1,code_value());
  6127. if(code_seen('B')) microstep_ms(4,-1,code_value());
  6128. break;
  6129. }
  6130. microstep_readings();
  6131. #endif
  6132. }
  6133. break;
  6134. case 701: //! M701 - load filament
  6135. {
  6136. if (mmu_enabled && code_seen('E'))
  6137. tmp_extruder = code_value();
  6138. gcode_M701();
  6139. }
  6140. break;
  6141. case 702: //! M702 [U C] -
  6142. {
  6143. #ifdef SNMM
  6144. if (code_seen('U'))
  6145. extr_unload_used(); //! if "U" unload all filaments which were used in current print
  6146. else if (code_seen('C'))
  6147. extr_unload(); //! if "C" unload just current filament
  6148. else
  6149. extr_unload_all(); //! otherwise unload all filaments
  6150. #else
  6151. if (code_seen('C')) {
  6152. if(mmu_enabled) extr_unload(); //! if "C" unload current filament; if mmu is not present no action is performed
  6153. }
  6154. else {
  6155. if(mmu_enabled) extr_unload(); //! unload current filament
  6156. else unload_filament();
  6157. }
  6158. #endif //SNMM
  6159. }
  6160. break;
  6161. case 999: // M999: Restart after being stopped
  6162. Stopped = false;
  6163. lcd_reset_alert_level();
  6164. gcode_LastN = Stopped_gcode_LastN;
  6165. FlushSerialRequestResend();
  6166. break;
  6167. default:
  6168. printf_P(PSTR("Unknown M code: %s \n"), cmdbuffer + bufindr + CMDHDRSIZE);
  6169. }
  6170. // printf_P(_N("END M-CODE=%u\n"), mcode_in_progress);
  6171. mcode_in_progress = 0;
  6172. }
  6173. }
  6174. // end if(code_seen('M')) (end of M codes)
  6175. //! T<extruder nr.> - select extruder in case of multi extruder printer
  6176. //! select filament in case of MMU_V2
  6177. //! if extruder is "?", open menu to let the user select extruder/filament
  6178. //!
  6179. //! For MMU_V2:
  6180. //! @n T<n> Gcode to extrude at least 38.10 mm at feedrate 19.02 mm/s must follow immediately to load to extruder wheels.
  6181. //! @n T? Gcode to extrude shouldn't have to follow, load to extruder wheels is done automatically
  6182. //! @n Tx Same as T?, except nozzle doesn't have to be preheated. Tc must be placed after extruder nozzle is preheated to finish filament load.
  6183. //! @n Tc Load to nozzle after filament was prepared by Tc and extruder nozzle is already heated.
  6184. else if(code_seen('T'))
  6185. {
  6186. int index;
  6187. bool load_to_nozzle = false;
  6188. for (index = 1; *(strchr_pointer + index) == ' ' || *(strchr_pointer + index) == '\t'; index++);
  6189. *(strchr_pointer + index) = tolower(*(strchr_pointer + index));
  6190. if ((*(strchr_pointer + index) < '0' || *(strchr_pointer + index) > '4') && *(strchr_pointer + index) != '?' && *(strchr_pointer + index) != 'x' && *(strchr_pointer + index) != 'c') {
  6191. SERIAL_ECHOLNPGM("Invalid T code.");
  6192. }
  6193. else if (*(strchr_pointer + index) == 'x'){ //load to bondtech gears; if mmu is not present do nothing
  6194. if (mmu_enabled)
  6195. {
  6196. tmp_extruder = choose_menu_P(_T(MSG_CHOOSE_FILAMENT), _T(MSG_FILAMENT));
  6197. if ((tmp_extruder == mmu_extruder) && mmu_fil_loaded) //dont execute the same T-code twice in a row
  6198. {
  6199. printf_P(PSTR("Duplicate T-code ignored.\n"));
  6200. }
  6201. else
  6202. {
  6203. st_synchronize();
  6204. mmu_command(MmuCmd::T0 + tmp_extruder);
  6205. manage_response(true, true, MMU_TCODE_MOVE);
  6206. }
  6207. }
  6208. }
  6209. else if (*(strchr_pointer + index) == 'c') { //load to from bondtech gears to nozzle (nozzle should be preheated)
  6210. if (mmu_enabled)
  6211. {
  6212. st_synchronize();
  6213. mmu_continue_loading(is_usb_printing);
  6214. mmu_extruder = tmp_extruder; //filament change is finished
  6215. mmu_load_to_nozzle();
  6216. }
  6217. }
  6218. else {
  6219. if (*(strchr_pointer + index) == '?')
  6220. {
  6221. if(mmu_enabled)
  6222. {
  6223. tmp_extruder = choose_menu_P(_T(MSG_CHOOSE_FILAMENT), _T(MSG_FILAMENT));
  6224. load_to_nozzle = true;
  6225. } else
  6226. {
  6227. tmp_extruder = choose_menu_P(_T(MSG_CHOOSE_EXTRUDER), _T(MSG_EXTRUDER));
  6228. }
  6229. }
  6230. else {
  6231. tmp_extruder = code_value();
  6232. if (mmu_enabled && lcd_autoDepleteEnabled())
  6233. {
  6234. tmp_extruder = ad_getAlternative(tmp_extruder);
  6235. }
  6236. }
  6237. st_synchronize();
  6238. snmm_filaments_used |= (1 << tmp_extruder); //for stop print
  6239. if (mmu_enabled)
  6240. {
  6241. if ((tmp_extruder == mmu_extruder) && mmu_fil_loaded) //dont execute the same T-code twice in a row
  6242. {
  6243. printf_P(PSTR("Duplicate T-code ignored.\n"));
  6244. }
  6245. else
  6246. {
  6247. mmu_command(MmuCmd::T0 + tmp_extruder);
  6248. manage_response(true, true, MMU_TCODE_MOVE);
  6249. mmu_continue_loading(is_usb_printing);
  6250. mmu_extruder = tmp_extruder; //filament change is finished
  6251. if (load_to_nozzle)// for single material usage with mmu
  6252. {
  6253. mmu_load_to_nozzle();
  6254. }
  6255. }
  6256. }
  6257. else
  6258. {
  6259. #ifdef SNMM
  6260. #ifdef LIN_ADVANCE
  6261. if (mmu_extruder != tmp_extruder)
  6262. clear_current_adv_vars(); //Check if the selected extruder is not the active one and reset LIN_ADVANCE variables if so.
  6263. #endif
  6264. mmu_extruder = tmp_extruder;
  6265. _delay(100);
  6266. disable_e0();
  6267. disable_e1();
  6268. disable_e2();
  6269. pinMode(E_MUX0_PIN, OUTPUT);
  6270. pinMode(E_MUX1_PIN, OUTPUT);
  6271. _delay(100);
  6272. SERIAL_ECHO_START;
  6273. SERIAL_ECHO("T:");
  6274. SERIAL_ECHOLN((int)tmp_extruder);
  6275. switch (tmp_extruder) {
  6276. case 1:
  6277. WRITE(E_MUX0_PIN, HIGH);
  6278. WRITE(E_MUX1_PIN, LOW);
  6279. break;
  6280. case 2:
  6281. WRITE(E_MUX0_PIN, LOW);
  6282. WRITE(E_MUX1_PIN, HIGH);
  6283. break;
  6284. case 3:
  6285. WRITE(E_MUX0_PIN, HIGH);
  6286. WRITE(E_MUX1_PIN, HIGH);
  6287. break;
  6288. default:
  6289. WRITE(E_MUX0_PIN, LOW);
  6290. WRITE(E_MUX1_PIN, LOW);
  6291. break;
  6292. }
  6293. _delay(100);
  6294. #else //SNMM
  6295. if (tmp_extruder >= EXTRUDERS) {
  6296. SERIAL_ECHO_START;
  6297. SERIAL_ECHOPGM("T");
  6298. SERIAL_PROTOCOLLN((int)tmp_extruder);
  6299. SERIAL_ECHOLNRPGM(_n("Invalid extruder"));////MSG_INVALID_EXTRUDER
  6300. }
  6301. else {
  6302. #if EXTRUDERS > 1
  6303. boolean make_move = false;
  6304. #endif
  6305. if (code_seen('F')) {
  6306. #if EXTRUDERS > 1
  6307. make_move = true;
  6308. #endif
  6309. next_feedrate = code_value();
  6310. if (next_feedrate > 0.0) {
  6311. feedrate = next_feedrate;
  6312. }
  6313. }
  6314. #if EXTRUDERS > 1
  6315. if (tmp_extruder != active_extruder) {
  6316. // Save current position to return to after applying extruder offset
  6317. memcpy(destination, current_position, sizeof(destination));
  6318. // Offset extruder (only by XY)
  6319. int i;
  6320. for (i = 0; i < 2; i++) {
  6321. current_position[i] = current_position[i] -
  6322. extruder_offset[i][active_extruder] +
  6323. extruder_offset[i][tmp_extruder];
  6324. }
  6325. // Set the new active extruder and position
  6326. active_extruder = tmp_extruder;
  6327. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  6328. // Move to the old position if 'F' was in the parameters
  6329. if (make_move && Stopped == false) {
  6330. prepare_move();
  6331. }
  6332. }
  6333. #endif
  6334. SERIAL_ECHO_START;
  6335. SERIAL_ECHORPGM(_n("Active Extruder: "));////MSG_ACTIVE_EXTRUDER
  6336. SERIAL_PROTOCOLLN((int)active_extruder);
  6337. }
  6338. #endif //SNMM
  6339. }
  6340. }
  6341. } // end if(code_seen('T')) (end of T codes)
  6342. else if (code_seen('D')) // D codes (debug)
  6343. {
  6344. switch((int)code_value())
  6345. {
  6346. case -1: //! D-1 - Endless loop
  6347. dcode__1(); break;
  6348. #ifdef DEBUG_DCODES
  6349. case 0: //! D0 - Reset
  6350. dcode_0(); break;
  6351. case 1: //! D1 - Clear EEPROM
  6352. dcode_1(); break;
  6353. case 2: //! D2 - Read/Write RAM
  6354. dcode_2(); break;
  6355. #endif //DEBUG_DCODES
  6356. #ifdef DEBUG_DCODE3
  6357. case 3: //! D3 - Read/Write EEPROM
  6358. dcode_3(); break;
  6359. #endif //DEBUG_DCODE3
  6360. #ifdef DEBUG_DCODES
  6361. case 4: //! D4 - Read/Write PIN
  6362. dcode_4(); break;
  6363. #endif //DEBUG_DCODES
  6364. #ifdef DEBUG_DCODE5
  6365. case 5: // D5 - Read/Write FLASH
  6366. dcode_5(); break;
  6367. break;
  6368. #endif //DEBUG_DCODE5
  6369. #ifdef DEBUG_DCODES
  6370. case 6: // D6 - Read/Write external FLASH
  6371. dcode_6(); break;
  6372. case 7: //! D7 - Read/Write Bootloader
  6373. dcode_7(); break;
  6374. case 8: //! D8 - Read/Write PINDA
  6375. dcode_8(); break;
  6376. case 9: //! D9 - Read/Write ADC
  6377. dcode_9(); break;
  6378. case 10: //! D10 - XYZ calibration = OK
  6379. dcode_10(); break;
  6380. #endif //DEBUG_DCODES
  6381. #ifdef HEATBED_ANALYSIS
  6382. case 80:
  6383. {
  6384. float dimension_x = 40;
  6385. float dimension_y = 40;
  6386. int points_x = 40;
  6387. int points_y = 40;
  6388. float offset_x = 74;
  6389. float offset_y = 33;
  6390. if (code_seen('E')) dimension_x = code_value();
  6391. if (code_seen('F')) dimension_y = code_value();
  6392. if (code_seen('G')) {points_x = code_value(); }
  6393. if (code_seen('H')) {points_y = code_value(); }
  6394. if (code_seen('I')) {offset_x = code_value(); }
  6395. if (code_seen('J')) {offset_y = code_value(); }
  6396. printf_P(PSTR("DIM X: %f\n"), dimension_x);
  6397. printf_P(PSTR("DIM Y: %f\n"), dimension_y);
  6398. printf_P(PSTR("POINTS X: %d\n"), points_x);
  6399. printf_P(PSTR("POINTS Y: %d\n"), points_y);
  6400. printf_P(PSTR("OFFSET X: %f\n"), offset_x);
  6401. printf_P(PSTR("OFFSET Y: %f\n"), offset_y);
  6402. bed_check(dimension_x,dimension_y,points_x,points_y,offset_x,offset_y);
  6403. }break;
  6404. case 81:
  6405. {
  6406. float dimension_x = 40;
  6407. float dimension_y = 40;
  6408. int points_x = 40;
  6409. int points_y = 40;
  6410. float offset_x = 74;
  6411. float offset_y = 33;
  6412. if (code_seen('E')) dimension_x = code_value();
  6413. if (code_seen('F')) dimension_y = code_value();
  6414. if (code_seen("G")) { strchr_pointer+=1; points_x = code_value(); }
  6415. if (code_seen("H")) { strchr_pointer+=1; points_y = code_value(); }
  6416. if (code_seen("I")) { strchr_pointer+=1; offset_x = code_value(); }
  6417. if (code_seen("J")) { strchr_pointer+=1; offset_y = code_value(); }
  6418. bed_analysis(dimension_x,dimension_y,points_x,points_y,offset_x,offset_y);
  6419. } break;
  6420. #endif //HEATBED_ANALYSIS
  6421. #ifdef DEBUG_DCODES
  6422. case 106: //D106 print measured fan speed for different pwm values
  6423. {
  6424. for (int i = 255; i > 0; i = i - 5) {
  6425. fanSpeed = i;
  6426. //delay_keep_alive(2000);
  6427. for (int j = 0; j < 100; j++) {
  6428. delay_keep_alive(100);
  6429. }
  6430. printf_P(_N("%d: %d\n"), i, fan_speed[1]);
  6431. }
  6432. }break;
  6433. #ifdef TMC2130
  6434. case 2130: //! D2130 - TMC2130
  6435. dcode_2130(); break;
  6436. #endif //TMC2130
  6437. #if (defined (FILAMENT_SENSOR) && defined(PAT9125))
  6438. case 9125: //! D9125 - FILAMENT_SENSOR
  6439. dcode_9125(); break;
  6440. #endif //FILAMENT_SENSOR
  6441. #endif //DEBUG_DCODES
  6442. }
  6443. }
  6444. else
  6445. {
  6446. SERIAL_ECHO_START;
  6447. SERIAL_ECHORPGM(MSG_UNKNOWN_COMMAND);
  6448. SERIAL_ECHO(CMDBUFFER_CURRENT_STRING);
  6449. SERIAL_ECHOLNPGM("\"(2)");
  6450. }
  6451. KEEPALIVE_STATE(NOT_BUSY);
  6452. ClearToSend();
  6453. }
  6454. void FlushSerialRequestResend()
  6455. {
  6456. //char cmdbuffer[bufindr][100]="Resend:";
  6457. MYSERIAL.flush();
  6458. printf_P(_N("%S: %ld\n%S\n"), _n("Resend"), gcode_LastN + 1, MSG_OK);
  6459. }
  6460. // Confirm the execution of a command, if sent from a serial line.
  6461. // Execution of a command from a SD card will not be confirmed.
  6462. void ClearToSend()
  6463. {
  6464. previous_millis_cmd = _millis();
  6465. if ((CMDBUFFER_CURRENT_TYPE == CMDBUFFER_CURRENT_TYPE_USB) || (CMDBUFFER_CURRENT_TYPE == CMDBUFFER_CURRENT_TYPE_USB_WITH_LINENR))
  6466. SERIAL_PROTOCOLLNRPGM(MSG_OK);
  6467. }
  6468. #if MOTHERBOARD == BOARD_RAMBO_MINI_1_0 || MOTHERBOARD == BOARD_RAMBO_MINI_1_3
  6469. void update_currents() {
  6470. float current_high[3] = DEFAULT_PWM_MOTOR_CURRENT_LOUD;
  6471. float current_low[3] = DEFAULT_PWM_MOTOR_CURRENT;
  6472. float tmp_motor[3];
  6473. //SERIAL_ECHOLNPGM("Currents updated: ");
  6474. if (destination[Z_AXIS] < Z_SILENT) {
  6475. //SERIAL_ECHOLNPGM("LOW");
  6476. for (uint8_t i = 0; i < 3; i++) {
  6477. st_current_set(i, current_low[i]);
  6478. /*MYSERIAL.print(int(i));
  6479. SERIAL_ECHOPGM(": ");
  6480. MYSERIAL.println(current_low[i]);*/
  6481. }
  6482. }
  6483. else if (destination[Z_AXIS] > Z_HIGH_POWER) {
  6484. //SERIAL_ECHOLNPGM("HIGH");
  6485. for (uint8_t i = 0; i < 3; i++) {
  6486. st_current_set(i, current_high[i]);
  6487. /*MYSERIAL.print(int(i));
  6488. SERIAL_ECHOPGM(": ");
  6489. MYSERIAL.println(current_high[i]);*/
  6490. }
  6491. }
  6492. else {
  6493. for (uint8_t i = 0; i < 3; i++) {
  6494. float q = current_low[i] - Z_SILENT*((current_high[i] - current_low[i]) / (Z_HIGH_POWER - Z_SILENT));
  6495. tmp_motor[i] = ((current_high[i] - current_low[i]) / (Z_HIGH_POWER - Z_SILENT))*destination[Z_AXIS] + q;
  6496. st_current_set(i, tmp_motor[i]);
  6497. /*MYSERIAL.print(int(i));
  6498. SERIAL_ECHOPGM(": ");
  6499. MYSERIAL.println(tmp_motor[i]);*/
  6500. }
  6501. }
  6502. }
  6503. #endif //MOTHERBOARD == BOARD_RAMBO_MINI_1_0 || MOTHERBOARD == BOARD_RAMBO_MINI_1_3
  6504. void get_coordinates()
  6505. {
  6506. bool seen[4]={false,false,false,false};
  6507. for(int8_t i=0; i < NUM_AXIS; i++) {
  6508. if(code_seen(axis_codes[i]))
  6509. {
  6510. bool relative = axis_relative_modes[i] || relative_mode;
  6511. destination[i] = (float)code_value();
  6512. if (i == E_AXIS) {
  6513. float emult = extruder_multiplier[active_extruder];
  6514. if (emult != 1.) {
  6515. if (! relative) {
  6516. destination[i] -= current_position[i];
  6517. relative = true;
  6518. }
  6519. destination[i] *= emult;
  6520. }
  6521. }
  6522. if (relative)
  6523. destination[i] += current_position[i];
  6524. seen[i]=true;
  6525. #if MOTHERBOARD == BOARD_RAMBO_MINI_1_0 || MOTHERBOARD == BOARD_RAMBO_MINI_1_3
  6526. if (i == Z_AXIS && SilentModeMenu == SILENT_MODE_AUTO) update_currents();
  6527. #endif //MOTHERBOARD == BOARD_RAMBO_MINI_1_0 || MOTHERBOARD == BOARD_RAMBO_MINI_1_3
  6528. }
  6529. else destination[i] = current_position[i]; //Are these else lines really needed?
  6530. }
  6531. if(code_seen('F')) {
  6532. next_feedrate = code_value();
  6533. #ifdef MAX_SILENT_FEEDRATE
  6534. if (tmc2130_mode == TMC2130_MODE_SILENT)
  6535. if (next_feedrate > MAX_SILENT_FEEDRATE) next_feedrate = MAX_SILENT_FEEDRATE;
  6536. #endif //MAX_SILENT_FEEDRATE
  6537. if(next_feedrate > 0.0) feedrate = next_feedrate;
  6538. if (!seen[0] && !seen[1] && !seen[2] && seen[3])
  6539. {
  6540. // float e_max_speed =
  6541. // printf_P(PSTR("E MOVE speed %7.3f\n"), feedrate / 60)
  6542. }
  6543. }
  6544. }
  6545. void get_arc_coordinates()
  6546. {
  6547. #ifdef SF_ARC_FIX
  6548. bool relative_mode_backup = relative_mode;
  6549. relative_mode = true;
  6550. #endif
  6551. get_coordinates();
  6552. #ifdef SF_ARC_FIX
  6553. relative_mode=relative_mode_backup;
  6554. #endif
  6555. if(code_seen('I')) {
  6556. offset[0] = code_value();
  6557. }
  6558. else {
  6559. offset[0] = 0.0;
  6560. }
  6561. if(code_seen('J')) {
  6562. offset[1] = code_value();
  6563. }
  6564. else {
  6565. offset[1] = 0.0;
  6566. }
  6567. }
  6568. void clamp_to_software_endstops(float target[3])
  6569. {
  6570. #ifdef DEBUG_DISABLE_SWLIMITS
  6571. return;
  6572. #endif //DEBUG_DISABLE_SWLIMITS
  6573. world2machine_clamp(target[0], target[1]);
  6574. // Clamp the Z coordinate.
  6575. if (min_software_endstops) {
  6576. float negative_z_offset = 0;
  6577. #ifdef ENABLE_AUTO_BED_LEVELING
  6578. if (Z_PROBE_OFFSET_FROM_EXTRUDER < 0) negative_z_offset = negative_z_offset + Z_PROBE_OFFSET_FROM_EXTRUDER;
  6579. if (cs.add_homing[Z_AXIS] < 0) negative_z_offset = negative_z_offset + cs.add_homing[Z_AXIS];
  6580. #endif
  6581. if (target[Z_AXIS] < min_pos[Z_AXIS]+negative_z_offset) target[Z_AXIS] = min_pos[Z_AXIS]+negative_z_offset;
  6582. }
  6583. if (max_software_endstops) {
  6584. if (target[Z_AXIS] > max_pos[Z_AXIS]) target[Z_AXIS] = max_pos[Z_AXIS];
  6585. }
  6586. }
  6587. #ifdef MESH_BED_LEVELING
  6588. void mesh_plan_buffer_line(const float &x, const float &y, const float &z, const float &e, const float &feed_rate, const uint8_t extruder) {
  6589. float dx = x - current_position[X_AXIS];
  6590. float dy = y - current_position[Y_AXIS];
  6591. float dz = z - current_position[Z_AXIS];
  6592. int n_segments = 0;
  6593. if (mbl.active) {
  6594. float len = abs(dx) + abs(dy);
  6595. if (len > 0)
  6596. // Split to 3cm segments or shorter.
  6597. n_segments = int(ceil(len / 30.f));
  6598. }
  6599. if (n_segments > 1) {
  6600. float de = e - current_position[E_AXIS];
  6601. for (int i = 1; i < n_segments; ++ i) {
  6602. float t = float(i) / float(n_segments);
  6603. if (saved_printing || (mbl.active == false)) return;
  6604. plan_buffer_line(
  6605. current_position[X_AXIS] + t * dx,
  6606. current_position[Y_AXIS] + t * dy,
  6607. current_position[Z_AXIS] + t * dz,
  6608. current_position[E_AXIS] + t * de,
  6609. feed_rate, extruder);
  6610. }
  6611. }
  6612. // The rest of the path.
  6613. plan_buffer_line(x, y, z, e, feed_rate, extruder);
  6614. current_position[X_AXIS] = x;
  6615. current_position[Y_AXIS] = y;
  6616. current_position[Z_AXIS] = z;
  6617. current_position[E_AXIS] = e;
  6618. }
  6619. #endif // MESH_BED_LEVELING
  6620. void prepare_move()
  6621. {
  6622. clamp_to_software_endstops(destination);
  6623. previous_millis_cmd = _millis();
  6624. // Do not use feedmultiply for E or Z only moves
  6625. if( (current_position[X_AXIS] == destination [X_AXIS]) && (current_position[Y_AXIS] == destination [Y_AXIS])) {
  6626. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
  6627. }
  6628. else {
  6629. #ifdef MESH_BED_LEVELING
  6630. mesh_plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply*(1./(60.f*100.f)), active_extruder);
  6631. #else
  6632. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply*(1./(60.f*100.f)), active_extruder);
  6633. #endif
  6634. }
  6635. for(int8_t i=0; i < NUM_AXIS; i++) {
  6636. current_position[i] = destination[i];
  6637. }
  6638. }
  6639. void prepare_arc_move(char isclockwise) {
  6640. float r = hypot(offset[X_AXIS], offset[Y_AXIS]); // Compute arc radius for mc_arc
  6641. // Trace the arc
  6642. mc_arc(current_position, destination, offset, X_AXIS, Y_AXIS, Z_AXIS, feedrate*feedmultiply/60/100.0, r, isclockwise, active_extruder);
  6643. // As far as the parser is concerned, the position is now == target. In reality the
  6644. // motion control system might still be processing the action and the real tool position
  6645. // in any intermediate location.
  6646. for(int8_t i=0; i < NUM_AXIS; i++) {
  6647. current_position[i] = destination[i];
  6648. }
  6649. previous_millis_cmd = _millis();
  6650. }
  6651. #if defined(CONTROLLERFAN_PIN) && CONTROLLERFAN_PIN > -1
  6652. #if defined(FAN_PIN)
  6653. #if CONTROLLERFAN_PIN == FAN_PIN
  6654. #error "You cannot set CONTROLLERFAN_PIN equal to FAN_PIN"
  6655. #endif
  6656. #endif
  6657. unsigned long lastMotor = 0; //Save the time for when a motor was turned on last
  6658. unsigned long lastMotorCheck = 0;
  6659. void controllerFan()
  6660. {
  6661. if ((_millis() - lastMotorCheck) >= 2500) //Not a time critical function, so we only check every 2500ms
  6662. {
  6663. lastMotorCheck = _millis();
  6664. if(!READ(X_ENABLE_PIN) || !READ(Y_ENABLE_PIN) || !READ(Z_ENABLE_PIN) || (soft_pwm_bed > 0)
  6665. #if EXTRUDERS > 2
  6666. || !READ(E2_ENABLE_PIN)
  6667. #endif
  6668. #if EXTRUDER > 1
  6669. #if defined(X2_ENABLE_PIN) && X2_ENABLE_PIN > -1
  6670. || !READ(X2_ENABLE_PIN)
  6671. #endif
  6672. || !READ(E1_ENABLE_PIN)
  6673. #endif
  6674. || !READ(E0_ENABLE_PIN)) //If any of the drivers are enabled...
  6675. {
  6676. lastMotor = _millis(); //... set time to NOW so the fan will turn on
  6677. }
  6678. if ((_millis() - lastMotor) >= (CONTROLLERFAN_SECS*1000UL) || lastMotor == 0) //If the last time any driver was enabled, is longer since than CONTROLLERSEC...
  6679. {
  6680. digitalWrite(CONTROLLERFAN_PIN, 0);
  6681. analogWrite(CONTROLLERFAN_PIN, 0);
  6682. }
  6683. else
  6684. {
  6685. // allows digital or PWM fan output to be used (see M42 handling)
  6686. digitalWrite(CONTROLLERFAN_PIN, CONTROLLERFAN_SPEED);
  6687. analogWrite(CONTROLLERFAN_PIN, CONTROLLERFAN_SPEED);
  6688. }
  6689. }
  6690. }
  6691. #endif
  6692. #ifdef TEMP_STAT_LEDS
  6693. static bool blue_led = false;
  6694. static bool red_led = false;
  6695. static uint32_t stat_update = 0;
  6696. void handle_status_leds(void) {
  6697. float max_temp = 0.0;
  6698. if(_millis() > stat_update) {
  6699. stat_update += 500; // Update every 0.5s
  6700. for (int8_t cur_extruder = 0; cur_extruder < EXTRUDERS; ++cur_extruder) {
  6701. max_temp = max(max_temp, degHotend(cur_extruder));
  6702. max_temp = max(max_temp, degTargetHotend(cur_extruder));
  6703. }
  6704. #if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1
  6705. max_temp = max(max_temp, degTargetBed());
  6706. max_temp = max(max_temp, degBed());
  6707. #endif
  6708. if((max_temp > 55.0) && (red_led == false)) {
  6709. digitalWrite(STAT_LED_RED, 1);
  6710. digitalWrite(STAT_LED_BLUE, 0);
  6711. red_led = true;
  6712. blue_led = false;
  6713. }
  6714. if((max_temp < 54.0) && (blue_led == false)) {
  6715. digitalWrite(STAT_LED_RED, 0);
  6716. digitalWrite(STAT_LED_BLUE, 1);
  6717. red_led = false;
  6718. blue_led = true;
  6719. }
  6720. }
  6721. }
  6722. #endif
  6723. #ifdef SAFETYTIMER
  6724. /**
  6725. * @brief Turn off heating after safetytimer_inactive_time milliseconds of inactivity
  6726. *
  6727. * Full screen blocking notification message is shown after heater turning off.
  6728. * Paused print is not considered inactivity, as nozzle is cooled anyway and bed cooling would
  6729. * damage print.
  6730. *
  6731. * If safetytimer_inactive_time is zero, feature is disabled (heating is never turned off because of inactivity)
  6732. */
  6733. static void handleSafetyTimer()
  6734. {
  6735. #if (EXTRUDERS > 1)
  6736. #error Implemented only for one extruder.
  6737. #endif //(EXTRUDERS > 1)
  6738. if ((PRINTER_ACTIVE) || (!degTargetBed() && !degTargetHotend(0)) || (!safetytimer_inactive_time))
  6739. {
  6740. safetyTimer.stop();
  6741. }
  6742. else if ((degTargetBed() || degTargetHotend(0)) && (!safetyTimer.running()))
  6743. {
  6744. safetyTimer.start();
  6745. }
  6746. else if (safetyTimer.expired(safetytimer_inactive_time))
  6747. {
  6748. setTargetBed(0);
  6749. setAllTargetHotends(0);
  6750. lcd_show_fullscreen_message_and_wait_P(_i("Heating disabled by safety timer."));////MSG_BED_HEATING_SAFETY_DISABLED
  6751. }
  6752. }
  6753. #endif //SAFETYTIMER
  6754. void manage_inactivity(bool ignore_stepper_queue/*=false*/) //default argument set in Marlin.h
  6755. {
  6756. bool bInhibitFlag;
  6757. #ifdef FILAMENT_SENSOR
  6758. if (mmu_enabled == false)
  6759. {
  6760. //-// if (mcode_in_progress != 600) //M600 not in progress
  6761. #ifdef PAT9125
  6762. bInhibitFlag=(menu_menu==lcd_menu_extruder_info); // Support::ExtruderInfo menu active
  6763. #endif // PAT9125
  6764. #ifdef IR_SENSOR
  6765. bInhibitFlag=(menu_menu==lcd_menu_show_sensors_state); // Support::SensorInfo menu active
  6766. #endif // IR_SENSOR
  6767. if ((mcode_in_progress != 600) && (eFilamentAction != e_FILAMENT_ACTION_autoLoad) && (!bInhibitFlag)) //M600 not in progress, preHeat @ autoLoad menu not active, Support::ExtruderInfo/SensorInfo menu not active
  6768. {
  6769. if (!moves_planned() && !IS_SD_PRINTING && !is_usb_printing && (lcd_commands_type != LCD_COMMAND_V2_CAL) && !wizard_active)
  6770. {
  6771. if (fsensor_check_autoload())
  6772. {
  6773. #ifdef PAT9125
  6774. fsensor_autoload_check_stop();
  6775. #endif //PAT9125
  6776. //-// if (degHotend0() > EXTRUDE_MINTEMP)
  6777. if(0)
  6778. {
  6779. if ((eSoundMode == e_SOUND_MODE_LOUD) || (eSoundMode == e_SOUND_MODE_ONCE))
  6780. _tone(BEEPER, 1000);
  6781. delay_keep_alive(50);
  6782. _noTone(BEEPER);
  6783. loading_flag = true;
  6784. enquecommand_front_P((PSTR("M701")));
  6785. }
  6786. else
  6787. {
  6788. /*
  6789. lcd_update_enable(false);
  6790. show_preheat_nozzle_warning();
  6791. lcd_update_enable(true);
  6792. */
  6793. eFilamentAction=e_FILAMENT_ACTION_autoLoad;
  6794. bFilamentFirstRun=false;
  6795. if(target_temperature[0]>=EXTRUDE_MINTEMP)
  6796. {
  6797. bFilamentPreheatState=true;
  6798. // mFilamentItem(target_temperature[0],target_temperature_bed);
  6799. menu_submenu(mFilamentItemForce);
  6800. }
  6801. else
  6802. {
  6803. menu_submenu(mFilamentMenu);
  6804. lcd_timeoutToStatus.start();
  6805. }
  6806. }
  6807. }
  6808. }
  6809. else
  6810. {
  6811. #ifdef PAT9125
  6812. fsensor_autoload_check_stop();
  6813. #endif //PAT9125
  6814. fsensor_update();
  6815. }
  6816. }
  6817. }
  6818. #endif //FILAMENT_SENSOR
  6819. #ifdef SAFETYTIMER
  6820. handleSafetyTimer();
  6821. #endif //SAFETYTIMER
  6822. #if defined(KILL_PIN) && KILL_PIN > -1
  6823. static int killCount = 0; // make the inactivity button a bit less responsive
  6824. const int KILL_DELAY = 10000;
  6825. #endif
  6826. if(buflen < (BUFSIZE-1)){
  6827. get_command();
  6828. }
  6829. if( (_millis() - previous_millis_cmd) > max_inactive_time )
  6830. if(max_inactive_time)
  6831. kill(_n(""), 4);
  6832. if(stepper_inactive_time) {
  6833. if( (_millis() - previous_millis_cmd) > stepper_inactive_time )
  6834. {
  6835. if(blocks_queued() == false && ignore_stepper_queue == false) {
  6836. disable_x();
  6837. disable_y();
  6838. disable_z();
  6839. disable_e0();
  6840. disable_e1();
  6841. disable_e2();
  6842. }
  6843. }
  6844. }
  6845. #ifdef CHDK //Check if pin should be set to LOW after M240 set it to HIGH
  6846. if (chdkActive && (_millis() - chdkHigh > CHDK_DELAY))
  6847. {
  6848. chdkActive = false;
  6849. WRITE(CHDK, LOW);
  6850. }
  6851. #endif
  6852. #if defined(KILL_PIN) && KILL_PIN > -1
  6853. // Check if the kill button was pressed and wait just in case it was an accidental
  6854. // key kill key press
  6855. // -------------------------------------------------------------------------------
  6856. if( 0 == READ(KILL_PIN) )
  6857. {
  6858. killCount++;
  6859. }
  6860. else if (killCount > 0)
  6861. {
  6862. killCount--;
  6863. }
  6864. // Exceeded threshold and we can confirm that it was not accidental
  6865. // KILL the machine
  6866. // ----------------------------------------------------------------
  6867. if ( killCount >= KILL_DELAY)
  6868. {
  6869. kill("", 5);
  6870. }
  6871. #endif
  6872. #if defined(CONTROLLERFAN_PIN) && CONTROLLERFAN_PIN > -1
  6873. controllerFan(); //Check if fan should be turned on to cool stepper drivers down
  6874. #endif
  6875. #ifdef EXTRUDER_RUNOUT_PREVENT
  6876. if( (_millis() - previous_millis_cmd) > EXTRUDER_RUNOUT_SECONDS*1000 )
  6877. if(degHotend(active_extruder)>EXTRUDER_RUNOUT_MINTEMP)
  6878. {
  6879. bool oldstatus=READ(E0_ENABLE_PIN);
  6880. enable_e0();
  6881. float oldepos=current_position[E_AXIS];
  6882. float oldedes=destination[E_AXIS];
  6883. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS],
  6884. destination[E_AXIS]+EXTRUDER_RUNOUT_EXTRUDE*EXTRUDER_RUNOUT_ESTEPS/cs.axis_steps_per_unit[E_AXIS],
  6885. EXTRUDER_RUNOUT_SPEED/60.*EXTRUDER_RUNOUT_ESTEPS/cs.axis_steps_per_unit[E_AXIS], active_extruder);
  6886. current_position[E_AXIS]=oldepos;
  6887. destination[E_AXIS]=oldedes;
  6888. plan_set_e_position(oldepos);
  6889. previous_millis_cmd=_millis();
  6890. st_synchronize();
  6891. WRITE(E0_ENABLE_PIN,oldstatus);
  6892. }
  6893. #endif
  6894. #ifdef TEMP_STAT_LEDS
  6895. handle_status_leds();
  6896. #endif
  6897. check_axes_activity();
  6898. mmu_loop();
  6899. }
  6900. void kill(const char *full_screen_message, unsigned char id)
  6901. {
  6902. printf_P(_N("KILL: %d\n"), id);
  6903. //return;
  6904. cli(); // Stop interrupts
  6905. disable_heater();
  6906. disable_x();
  6907. // SERIAL_ECHOLNPGM("kill - disable Y");
  6908. disable_y();
  6909. disable_z();
  6910. disable_e0();
  6911. disable_e1();
  6912. disable_e2();
  6913. #if defined(PS_ON_PIN) && PS_ON_PIN > -1
  6914. pinMode(PS_ON_PIN,INPUT);
  6915. #endif
  6916. SERIAL_ERROR_START;
  6917. SERIAL_ERRORLNRPGM(_n("Printer halted. kill() called!"));////MSG_ERR_KILLED
  6918. if (full_screen_message != NULL) {
  6919. SERIAL_ERRORLNRPGM(full_screen_message);
  6920. lcd_display_message_fullscreen_P(full_screen_message);
  6921. } else {
  6922. LCD_ALERTMESSAGERPGM(_n("KILLED. "));////MSG_KILLED
  6923. }
  6924. // FMC small patch to update the LCD before ending
  6925. sei(); // enable interrupts
  6926. for ( int i=5; i--; lcd_update(0))
  6927. {
  6928. _delay(200);
  6929. }
  6930. cli(); // disable interrupts
  6931. suicide();
  6932. while(1)
  6933. {
  6934. #ifdef WATCHDOG
  6935. wdt_reset();
  6936. #endif //WATCHDOG
  6937. /* Intentionally left empty */
  6938. } // Wait for reset
  6939. }
  6940. void Stop()
  6941. {
  6942. disable_heater();
  6943. if(Stopped == false) {
  6944. Stopped = true;
  6945. lcd_print_stop();
  6946. Stopped_gcode_LastN = gcode_LastN; // Save last g_code for restart
  6947. SERIAL_ERROR_START;
  6948. SERIAL_ERRORLNRPGM(MSG_ERR_STOPPED);
  6949. LCD_MESSAGERPGM(_T(MSG_STOPPED));
  6950. }
  6951. }
  6952. bool IsStopped() { return Stopped; };
  6953. #ifdef FAST_PWM_FAN
  6954. void setPwmFrequency(uint8_t pin, int val)
  6955. {
  6956. val &= 0x07;
  6957. switch(digitalPinToTimer(pin))
  6958. {
  6959. #if defined(TCCR0A)
  6960. case TIMER0A:
  6961. case TIMER0B:
  6962. // TCCR0B &= ~(_BV(CS00) | _BV(CS01) | _BV(CS02));
  6963. // TCCR0B |= val;
  6964. break;
  6965. #endif
  6966. #if defined(TCCR1A)
  6967. case TIMER1A:
  6968. case TIMER1B:
  6969. // TCCR1B &= ~(_BV(CS10) | _BV(CS11) | _BV(CS12));
  6970. // TCCR1B |= val;
  6971. break;
  6972. #endif
  6973. #if defined(TCCR2)
  6974. case TIMER2:
  6975. case TIMER2:
  6976. TCCR2 &= ~(_BV(CS10) | _BV(CS11) | _BV(CS12));
  6977. TCCR2 |= val;
  6978. break;
  6979. #endif
  6980. #if defined(TCCR2A)
  6981. case TIMER2A:
  6982. case TIMER2B:
  6983. TCCR2B &= ~(_BV(CS20) | _BV(CS21) | _BV(CS22));
  6984. TCCR2B |= val;
  6985. break;
  6986. #endif
  6987. #if defined(TCCR3A)
  6988. case TIMER3A:
  6989. case TIMER3B:
  6990. case TIMER3C:
  6991. TCCR3B &= ~(_BV(CS30) | _BV(CS31) | _BV(CS32));
  6992. TCCR3B |= val;
  6993. break;
  6994. #endif
  6995. #if defined(TCCR4A)
  6996. case TIMER4A:
  6997. case TIMER4B:
  6998. case TIMER4C:
  6999. TCCR4B &= ~(_BV(CS40) | _BV(CS41) | _BV(CS42));
  7000. TCCR4B |= val;
  7001. break;
  7002. #endif
  7003. #if defined(TCCR5A)
  7004. case TIMER5A:
  7005. case TIMER5B:
  7006. case TIMER5C:
  7007. TCCR5B &= ~(_BV(CS50) | _BV(CS51) | _BV(CS52));
  7008. TCCR5B |= val;
  7009. break;
  7010. #endif
  7011. }
  7012. }
  7013. #endif //FAST_PWM_FAN
  7014. //! @brief Get and validate extruder number
  7015. //!
  7016. //! If it is not specified, active_extruder is returned in parameter extruder.
  7017. //! @param [in] code M code number
  7018. //! @param [out] extruder
  7019. //! @return error
  7020. //! @retval true Invalid extruder specified in T code
  7021. //! @retval false Valid extruder specified in T code, or not specifiead
  7022. bool setTargetedHotend(int code, uint8_t &extruder)
  7023. {
  7024. extruder = active_extruder;
  7025. if(code_seen('T')) {
  7026. extruder = code_value();
  7027. if(extruder >= EXTRUDERS) {
  7028. SERIAL_ECHO_START;
  7029. switch(code){
  7030. case 104:
  7031. SERIAL_ECHORPGM(_n("M104 Invalid extruder "));////MSG_M104_INVALID_EXTRUDER
  7032. break;
  7033. case 105:
  7034. SERIAL_ECHO(_n("M105 Invalid extruder "));////MSG_M105_INVALID_EXTRUDER
  7035. break;
  7036. case 109:
  7037. SERIAL_ECHO(_n("M109 Invalid extruder "));////MSG_M109_INVALID_EXTRUDER
  7038. break;
  7039. case 218:
  7040. SERIAL_ECHO(_n("M218 Invalid extruder "));////MSG_M218_INVALID_EXTRUDER
  7041. break;
  7042. case 221:
  7043. SERIAL_ECHO(_n("M221 Invalid extruder "));////MSG_M221_INVALID_EXTRUDER
  7044. break;
  7045. }
  7046. SERIAL_PROTOCOLLN((int)extruder);
  7047. return true;
  7048. }
  7049. }
  7050. return false;
  7051. }
  7052. void save_statistics(unsigned long _total_filament_used, unsigned long _total_print_time) //_total_filament_used unit: mm/100; print time in s
  7053. {
  7054. if (eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME) == 255 && eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME + 1) == 255 && eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME + 2) == 255 && eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME + 3) == 255)
  7055. {
  7056. eeprom_update_dword((uint32_t *)EEPROM_TOTALTIME, 0);
  7057. eeprom_update_dword((uint32_t *)EEPROM_FILAMENTUSED, 0);
  7058. }
  7059. unsigned long _previous_filament = eeprom_read_dword((uint32_t *)EEPROM_FILAMENTUSED); //_previous_filament unit: cm
  7060. unsigned long _previous_time = eeprom_read_dword((uint32_t *)EEPROM_TOTALTIME); //_previous_time unit: min
  7061. eeprom_update_dword((uint32_t *)EEPROM_TOTALTIME, _previous_time + (_total_print_time/60)); //EEPROM_TOTALTIME unit: min
  7062. eeprom_update_dword((uint32_t *)EEPROM_FILAMENTUSED, _previous_filament + (_total_filament_used / 1000));
  7063. total_filament_used = 0;
  7064. }
  7065. float calculate_extruder_multiplier(float diameter) {
  7066. float out = 1.f;
  7067. if (cs.volumetric_enabled && diameter > 0.f) {
  7068. float area = M_PI * diameter * diameter * 0.25;
  7069. out = 1.f / area;
  7070. }
  7071. if (extrudemultiply != 100)
  7072. out *= float(extrudemultiply) * 0.01f;
  7073. return out;
  7074. }
  7075. void calculate_extruder_multipliers() {
  7076. extruder_multiplier[0] = calculate_extruder_multiplier(cs.filament_size[0]);
  7077. #if EXTRUDERS > 1
  7078. extruder_multiplier[1] = calculate_extruder_multiplier(cs.filament_size[1]);
  7079. #if EXTRUDERS > 2
  7080. extruder_multiplier[2] = calculate_extruder_multiplier(cs.filament_size[2]);
  7081. #endif
  7082. #endif
  7083. }
  7084. void delay_keep_alive(unsigned int ms)
  7085. {
  7086. for (;;) {
  7087. manage_heater();
  7088. // Manage inactivity, but don't disable steppers on timeout.
  7089. manage_inactivity(true);
  7090. lcd_update(0);
  7091. if (ms == 0)
  7092. break;
  7093. else if (ms >= 50) {
  7094. _delay(50);
  7095. ms -= 50;
  7096. } else {
  7097. _delay(ms);
  7098. ms = 0;
  7099. }
  7100. }
  7101. }
  7102. static void wait_for_heater(long codenum, uint8_t extruder) {
  7103. #ifdef TEMP_RESIDENCY_TIME
  7104. long residencyStart;
  7105. residencyStart = -1;
  7106. /* continue to loop until we have reached the target temp
  7107. _and_ until TEMP_RESIDENCY_TIME hasn't passed since we reached it */
  7108. while ((!cancel_heatup) && ((residencyStart == -1) ||
  7109. (residencyStart >= 0 && (((unsigned int)(_millis() - residencyStart)) < (TEMP_RESIDENCY_TIME * 1000UL))))) {
  7110. #else
  7111. while (target_direction ? (isHeatingHotend(tmp_extruder)) : (isCoolingHotend(tmp_extruder) && (CooldownNoWait == false))) {
  7112. #endif //TEMP_RESIDENCY_TIME
  7113. if ((_millis() - codenum) > 1000UL)
  7114. { //Print Temp Reading and remaining time every 1 second while heating up/cooling down
  7115. if (!farm_mode) {
  7116. SERIAL_PROTOCOLPGM("T:");
  7117. SERIAL_PROTOCOL_F(degHotend(extruder), 1);
  7118. SERIAL_PROTOCOLPGM(" E:");
  7119. SERIAL_PROTOCOL((int)extruder);
  7120. #ifdef TEMP_RESIDENCY_TIME
  7121. SERIAL_PROTOCOLPGM(" W:");
  7122. if (residencyStart > -1)
  7123. {
  7124. codenum = ((TEMP_RESIDENCY_TIME * 1000UL) - (_millis() - residencyStart)) / 1000UL;
  7125. SERIAL_PROTOCOLLN(codenum);
  7126. }
  7127. else
  7128. {
  7129. SERIAL_PROTOCOLLN("?");
  7130. }
  7131. }
  7132. #else
  7133. SERIAL_PROTOCOLLN("");
  7134. #endif
  7135. codenum = _millis();
  7136. }
  7137. manage_heater();
  7138. manage_inactivity(true); //do not disable steppers
  7139. lcd_update(0);
  7140. #ifdef TEMP_RESIDENCY_TIME
  7141. /* start/restart the TEMP_RESIDENCY_TIME timer whenever we reach target temp for the first time
  7142. or when current temp falls outside the hysteresis after target temp was reached */
  7143. if ((residencyStart == -1 && target_direction && (degHotend(extruder) >= (degTargetHotend(extruder) - TEMP_WINDOW))) ||
  7144. (residencyStart == -1 && !target_direction && (degHotend(extruder) <= (degTargetHotend(extruder) + TEMP_WINDOW))) ||
  7145. (residencyStart > -1 && labs(degHotend(extruder) - degTargetHotend(extruder)) > TEMP_HYSTERESIS))
  7146. {
  7147. residencyStart = _millis();
  7148. }
  7149. #endif //TEMP_RESIDENCY_TIME
  7150. }
  7151. }
  7152. void check_babystep()
  7153. {
  7154. int babystep_z;
  7155. EEPROM_read_B(EEPROM_BABYSTEP_Z, &babystep_z);
  7156. if ((babystep_z < Z_BABYSTEP_MIN) || (babystep_z > Z_BABYSTEP_MAX)) {
  7157. babystep_z = 0; //if babystep value is out of min max range, set it to 0
  7158. SERIAL_ECHOLNPGM("Z live adjust out of range. Setting to 0");
  7159. EEPROM_save_B(EEPROM_BABYSTEP_Z, &babystep_z);
  7160. lcd_show_fullscreen_message_and_wait_P(PSTR("Z live adjust out of range. Setting to 0. Click to continue."));
  7161. lcd_update_enable(true);
  7162. }
  7163. }
  7164. #ifdef HEATBED_ANALYSIS
  7165. void d_setup()
  7166. {
  7167. pinMode(D_DATACLOCK, INPUT_PULLUP);
  7168. pinMode(D_DATA, INPUT_PULLUP);
  7169. pinMode(D_REQUIRE, OUTPUT);
  7170. digitalWrite(D_REQUIRE, HIGH);
  7171. }
  7172. float d_ReadData()
  7173. {
  7174. int digit[13];
  7175. String mergeOutput;
  7176. float output;
  7177. digitalWrite(D_REQUIRE, HIGH);
  7178. for (int i = 0; i<13; i++)
  7179. {
  7180. for (int j = 0; j < 4; j++)
  7181. {
  7182. while (digitalRead(D_DATACLOCK) == LOW) {}
  7183. while (digitalRead(D_DATACLOCK) == HIGH) {}
  7184. bitWrite(digit[i], j, digitalRead(D_DATA));
  7185. }
  7186. }
  7187. digitalWrite(D_REQUIRE, LOW);
  7188. mergeOutput = "";
  7189. output = 0;
  7190. for (int r = 5; r <= 10; r++) //Merge digits
  7191. {
  7192. mergeOutput += digit[r];
  7193. }
  7194. output = mergeOutput.toFloat();
  7195. if (digit[4] == 8) //Handle sign
  7196. {
  7197. output *= -1;
  7198. }
  7199. for (int i = digit[11]; i > 0; i--) //Handle floating point
  7200. {
  7201. output /= 10;
  7202. }
  7203. return output;
  7204. }
  7205. void bed_check(float x_dimension, float y_dimension, int x_points_num, int y_points_num, float shift_x, float shift_y) {
  7206. int t1 = 0;
  7207. int t_delay = 0;
  7208. int digit[13];
  7209. int m;
  7210. char str[3];
  7211. //String mergeOutput;
  7212. char mergeOutput[15];
  7213. float output;
  7214. int mesh_point = 0; //index number of calibration point
  7215. float bed_zero_ref_x = (-22.f + X_PROBE_OFFSET_FROM_EXTRUDER); //shift between zero point on bed and target and between probe and nozzle
  7216. float bed_zero_ref_y = (-0.6f + Y_PROBE_OFFSET_FROM_EXTRUDER);
  7217. float mesh_home_z_search = 4;
  7218. float measure_z_heigth = 0.2f;
  7219. float row[x_points_num];
  7220. int ix = 0;
  7221. int iy = 0;
  7222. const char* filename_wldsd = "mesh.txt";
  7223. char data_wldsd[x_points_num * 7 + 1]; //6 chars(" -A.BCD")for each measurement + null
  7224. char numb_wldsd[8]; // (" -A.BCD" + null)
  7225. #ifdef MICROMETER_LOGGING
  7226. d_setup();
  7227. #endif //MICROMETER_LOGGING
  7228. int XY_AXIS_FEEDRATE = homing_feedrate[X_AXIS] / 20;
  7229. int Z_LIFT_FEEDRATE = homing_feedrate[Z_AXIS] / 40;
  7230. unsigned int custom_message_type_old = custom_message_type;
  7231. unsigned int custom_message_state_old = custom_message_state;
  7232. custom_message_type = CUSTOM_MSG_TYPE_MESHBL;
  7233. custom_message_state = (x_points_num * y_points_num) + 10;
  7234. lcd_update(1);
  7235. //mbl.reset();
  7236. babystep_undo();
  7237. card.openFile(filename_wldsd, false);
  7238. /*destination[Z_AXIS] = mesh_home_z_search;
  7239. //plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], Z_LIFT_FEEDRATE, active_extruder);
  7240. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], Z_LIFT_FEEDRATE, active_extruder);
  7241. for(int8_t i=0; i < NUM_AXIS; i++) {
  7242. current_position[i] = destination[i];
  7243. }
  7244. st_synchronize();
  7245. */
  7246. destination[Z_AXIS] = measure_z_heigth;
  7247. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], Z_LIFT_FEEDRATE, active_extruder);
  7248. for(int8_t i=0; i < NUM_AXIS; i++) {
  7249. current_position[i] = destination[i];
  7250. }
  7251. st_synchronize();
  7252. /*int l_feedmultiply = */setup_for_endstop_move(false);
  7253. SERIAL_PROTOCOLPGM("Num X,Y: ");
  7254. SERIAL_PROTOCOL(x_points_num);
  7255. SERIAL_PROTOCOLPGM(",");
  7256. SERIAL_PROTOCOL(y_points_num);
  7257. SERIAL_PROTOCOLPGM("\nZ search height: ");
  7258. SERIAL_PROTOCOL(mesh_home_z_search);
  7259. SERIAL_PROTOCOLPGM("\nDimension X,Y: ");
  7260. SERIAL_PROTOCOL(x_dimension);
  7261. SERIAL_PROTOCOLPGM(",");
  7262. SERIAL_PROTOCOL(y_dimension);
  7263. SERIAL_PROTOCOLLNPGM("\nMeasured points:");
  7264. while (mesh_point != x_points_num * y_points_num) {
  7265. ix = mesh_point % x_points_num; // from 0 to MESH_NUM_X_POINTS - 1
  7266. iy = mesh_point / x_points_num;
  7267. if (iy & 1) ix = (x_points_num - 1) - ix; // Zig zag
  7268. float z0 = 0.f;
  7269. /*destination[Z_AXIS] = mesh_home_z_search;
  7270. //plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], Z_LIFT_FEEDRATE, active_extruder);
  7271. plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], Z_LIFT_FEEDRATE, active_extruder);
  7272. for(int8_t i=0; i < NUM_AXIS; i++) {
  7273. current_position[i] = destination[i];
  7274. }
  7275. st_synchronize();*/
  7276. //current_position[X_AXIS] = 13.f + ix * (x_dimension / (x_points_num - 1)) - bed_zero_ref_x + shift_x;
  7277. //current_position[Y_AXIS] = 6.4f + iy * (y_dimension / (y_points_num - 1)) - bed_zero_ref_y + shift_y;
  7278. destination[X_AXIS] = ix * (x_dimension / (x_points_num - 1)) + shift_x;
  7279. destination[Y_AXIS] = iy * (y_dimension / (y_points_num - 1)) + shift_y;
  7280. mesh_plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], XY_AXIS_FEEDRATE/6, active_extruder);
  7281. for(int8_t i=0; i < NUM_AXIS; i++) {
  7282. current_position[i] = destination[i];
  7283. }
  7284. st_synchronize();
  7285. // printf_P(PSTR("X = %f; Y= %f \n"), current_position[X_AXIS], current_position[Y_AXIS]);
  7286. delay_keep_alive(1000);
  7287. #ifdef MICROMETER_LOGGING
  7288. //memset(numb_wldsd, 0, sizeof(numb_wldsd));
  7289. //dtostrf(d_ReadData(), 8, 5, numb_wldsd);
  7290. //strcat(data_wldsd, numb_wldsd);
  7291. //MYSERIAL.println(data_wldsd);
  7292. //delay(1000);
  7293. //delay(3000);
  7294. //t1 = millis();
  7295. //while (digitalRead(D_DATACLOCK) == LOW) {}
  7296. //while (digitalRead(D_DATACLOCK) == HIGH) {}
  7297. memset(digit, 0, sizeof(digit));
  7298. //cli();
  7299. digitalWrite(D_REQUIRE, LOW);
  7300. for (int i = 0; i<13; i++)
  7301. {
  7302. //t1 = millis();
  7303. for (int j = 0; j < 4; j++)
  7304. {
  7305. while (digitalRead(D_DATACLOCK) == LOW) {}
  7306. while (digitalRead(D_DATACLOCK) == HIGH) {}
  7307. //printf_P(PSTR("Done %d\n"), j);
  7308. bitWrite(digit[i], j, digitalRead(D_DATA));
  7309. }
  7310. //t_delay = (millis() - t1);
  7311. //SERIAL_PROTOCOLPGM(" ");
  7312. //SERIAL_PROTOCOL_F(t_delay, 5);
  7313. //SERIAL_PROTOCOLPGM(" ");
  7314. }
  7315. //sei();
  7316. digitalWrite(D_REQUIRE, HIGH);
  7317. mergeOutput[0] = '\0';
  7318. output = 0;
  7319. for (int r = 5; r <= 10; r++) //Merge digits
  7320. {
  7321. sprintf(str, "%d", digit[r]);
  7322. strcat(mergeOutput, str);
  7323. }
  7324. output = atof(mergeOutput);
  7325. if (digit[4] == 8) //Handle sign
  7326. {
  7327. output *= -1;
  7328. }
  7329. for (int i = digit[11]; i > 0; i--) //Handle floating point
  7330. {
  7331. output *= 0.1;
  7332. }
  7333. //output = d_ReadData();
  7334. //row[ix] = current_position[Z_AXIS];
  7335. //row[ix] = d_ReadData();
  7336. row[ix] = output;
  7337. if (iy % 2 == 1 ? ix == 0 : ix == x_points_num - 1) {
  7338. memset(data_wldsd, 0, sizeof(data_wldsd));
  7339. for (int i = 0; i < x_points_num; i++) {
  7340. SERIAL_PROTOCOLPGM(" ");
  7341. SERIAL_PROTOCOL_F(row[i], 5);
  7342. memset(numb_wldsd, 0, sizeof(numb_wldsd));
  7343. dtostrf(row[i], 7, 3, numb_wldsd);
  7344. strcat(data_wldsd, numb_wldsd);
  7345. }
  7346. card.write_command(data_wldsd);
  7347. SERIAL_PROTOCOLPGM("\n");
  7348. }
  7349. custom_message_state--;
  7350. mesh_point++;
  7351. lcd_update(1);
  7352. }
  7353. #endif //MICROMETER_LOGGING
  7354. card.closefile();
  7355. //clean_up_after_endstop_move(l_feedmultiply);
  7356. }
  7357. void bed_analysis(float x_dimension, float y_dimension, int x_points_num, int y_points_num, float shift_x, float shift_y) {
  7358. int t1 = 0;
  7359. int t_delay = 0;
  7360. int digit[13];
  7361. int m;
  7362. char str[3];
  7363. //String mergeOutput;
  7364. char mergeOutput[15];
  7365. float output;
  7366. int mesh_point = 0; //index number of calibration point
  7367. float bed_zero_ref_x = (-22.f + X_PROBE_OFFSET_FROM_EXTRUDER); //shift between zero point on bed and target and between probe and nozzle
  7368. float bed_zero_ref_y = (-0.6f + Y_PROBE_OFFSET_FROM_EXTRUDER);
  7369. float mesh_home_z_search = 4;
  7370. float row[x_points_num];
  7371. int ix = 0;
  7372. int iy = 0;
  7373. const char* filename_wldsd = "wldsd.txt";
  7374. char data_wldsd[70];
  7375. char numb_wldsd[10];
  7376. d_setup();
  7377. if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS])) {
  7378. // We don't know where we are! HOME!
  7379. // Push the commands to the front of the message queue in the reverse order!
  7380. // There shall be always enough space reserved for these commands.
  7381. repeatcommand_front(); // repeat G80 with all its parameters
  7382. enquecommand_front_P((PSTR("G28 W0")));
  7383. enquecommand_front_P((PSTR("G1 Z5")));
  7384. return;
  7385. }
  7386. unsigned int custom_message_type_old = custom_message_type;
  7387. unsigned int custom_message_state_old = custom_message_state;
  7388. custom_message_type = CUSTOM_MSG_TYPE_MESHBL;
  7389. custom_message_state = (x_points_num * y_points_num) + 10;
  7390. lcd_update(1);
  7391. mbl.reset();
  7392. babystep_undo();
  7393. card.openFile(filename_wldsd, false);
  7394. current_position[Z_AXIS] = mesh_home_z_search;
  7395. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[Z_AXIS] / 60, active_extruder);
  7396. int XY_AXIS_FEEDRATE = homing_feedrate[X_AXIS] / 20;
  7397. int Z_LIFT_FEEDRATE = homing_feedrate[Z_AXIS] / 40;
  7398. int l_feedmultiply = setup_for_endstop_move(false);
  7399. SERIAL_PROTOCOLPGM("Num X,Y: ");
  7400. SERIAL_PROTOCOL(x_points_num);
  7401. SERIAL_PROTOCOLPGM(",");
  7402. SERIAL_PROTOCOL(y_points_num);
  7403. SERIAL_PROTOCOLPGM("\nZ search height: ");
  7404. SERIAL_PROTOCOL(mesh_home_z_search);
  7405. SERIAL_PROTOCOLPGM("\nDimension X,Y: ");
  7406. SERIAL_PROTOCOL(x_dimension);
  7407. SERIAL_PROTOCOLPGM(",");
  7408. SERIAL_PROTOCOL(y_dimension);
  7409. SERIAL_PROTOCOLLNPGM("\nMeasured points:");
  7410. while (mesh_point != x_points_num * y_points_num) {
  7411. ix = mesh_point % x_points_num; // from 0 to MESH_NUM_X_POINTS - 1
  7412. iy = mesh_point / x_points_num;
  7413. if (iy & 1) ix = (x_points_num - 1) - ix; // Zig zag
  7414. float z0 = 0.f;
  7415. current_position[Z_AXIS] = mesh_home_z_search;
  7416. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], Z_LIFT_FEEDRATE, active_extruder);
  7417. st_synchronize();
  7418. current_position[X_AXIS] = 13.f + ix * (x_dimension / (x_points_num - 1)) - bed_zero_ref_x + shift_x;
  7419. current_position[Y_AXIS] = 6.4f + iy * (y_dimension / (y_points_num - 1)) - bed_zero_ref_y + shift_y;
  7420. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], XY_AXIS_FEEDRATE, active_extruder);
  7421. st_synchronize();
  7422. if (!find_bed_induction_sensor_point_z(-10.f)) { //if we have data from z calibration max allowed difference is 1mm for each point, if we dont have data max difference is 10mm from initial point
  7423. break;
  7424. card.closefile();
  7425. }
  7426. //memset(numb_wldsd, 0, sizeof(numb_wldsd));
  7427. //dtostrf(d_ReadData(), 8, 5, numb_wldsd);
  7428. //strcat(data_wldsd, numb_wldsd);
  7429. //MYSERIAL.println(data_wldsd);
  7430. //_delay(1000);
  7431. //_delay(3000);
  7432. //t1 = _millis();
  7433. //while (digitalRead(D_DATACLOCK) == LOW) {}
  7434. //while (digitalRead(D_DATACLOCK) == HIGH) {}
  7435. memset(digit, 0, sizeof(digit));
  7436. //cli();
  7437. digitalWrite(D_REQUIRE, LOW);
  7438. for (int i = 0; i<13; i++)
  7439. {
  7440. //t1 = _millis();
  7441. for (int j = 0; j < 4; j++)
  7442. {
  7443. while (digitalRead(D_DATACLOCK) == LOW) {}
  7444. while (digitalRead(D_DATACLOCK) == HIGH) {}
  7445. bitWrite(digit[i], j, digitalRead(D_DATA));
  7446. }
  7447. //t_delay = (_millis() - t1);
  7448. //SERIAL_PROTOCOLPGM(" ");
  7449. //SERIAL_PROTOCOL_F(t_delay, 5);
  7450. //SERIAL_PROTOCOLPGM(" ");
  7451. }
  7452. //sei();
  7453. digitalWrite(D_REQUIRE, HIGH);
  7454. mergeOutput[0] = '\0';
  7455. output = 0;
  7456. for (int r = 5; r <= 10; r++) //Merge digits
  7457. {
  7458. sprintf(str, "%d", digit[r]);
  7459. strcat(mergeOutput, str);
  7460. }
  7461. output = atof(mergeOutput);
  7462. if (digit[4] == 8) //Handle sign
  7463. {
  7464. output *= -1;
  7465. }
  7466. for (int i = digit[11]; i > 0; i--) //Handle floating point
  7467. {
  7468. output *= 0.1;
  7469. }
  7470. //output = d_ReadData();
  7471. //row[ix] = current_position[Z_AXIS];
  7472. memset(data_wldsd, 0, sizeof(data_wldsd));
  7473. for (int i = 0; i <3; i++) {
  7474. memset(numb_wldsd, 0, sizeof(numb_wldsd));
  7475. dtostrf(current_position[i], 8, 5, numb_wldsd);
  7476. strcat(data_wldsd, numb_wldsd);
  7477. strcat(data_wldsd, ";");
  7478. }
  7479. memset(numb_wldsd, 0, sizeof(numb_wldsd));
  7480. dtostrf(output, 8, 5, numb_wldsd);
  7481. strcat(data_wldsd, numb_wldsd);
  7482. //strcat(data_wldsd, ";");
  7483. card.write_command(data_wldsd);
  7484. //row[ix] = d_ReadData();
  7485. row[ix] = output; // current_position[Z_AXIS];
  7486. if (iy % 2 == 1 ? ix == 0 : ix == x_points_num - 1) {
  7487. for (int i = 0; i < x_points_num; i++) {
  7488. SERIAL_PROTOCOLPGM(" ");
  7489. SERIAL_PROTOCOL_F(row[i], 5);
  7490. }
  7491. SERIAL_PROTOCOLPGM("\n");
  7492. }
  7493. custom_message_state--;
  7494. mesh_point++;
  7495. lcd_update(1);
  7496. }
  7497. card.closefile();
  7498. clean_up_after_endstop_move(l_feedmultiply);
  7499. }
  7500. #endif //HEATBED_ANALYSIS
  7501. void temp_compensation_start() {
  7502. custom_message_type = CUSTOM_MSG_TYPE_TEMPRE;
  7503. custom_message_state = PINDA_HEAT_T + 1;
  7504. lcd_update(2);
  7505. if (degHotend(active_extruder) > EXTRUDE_MINTEMP) {
  7506. current_position[E_AXIS] -= default_retraction;
  7507. }
  7508. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 400, active_extruder);
  7509. current_position[X_AXIS] = PINDA_PREHEAT_X;
  7510. current_position[Y_AXIS] = PINDA_PREHEAT_Y;
  7511. current_position[Z_AXIS] = PINDA_PREHEAT_Z;
  7512. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
  7513. st_synchronize();
  7514. while (fabs(degBed() - target_temperature_bed) > 1) delay_keep_alive(1000);
  7515. for (int i = 0; i < PINDA_HEAT_T; i++) {
  7516. delay_keep_alive(1000);
  7517. custom_message_state = PINDA_HEAT_T - i;
  7518. if (custom_message_state == 99 || custom_message_state == 9) lcd_update(2); //force whole display redraw if number of digits changed
  7519. else lcd_update(1);
  7520. }
  7521. custom_message_type = CUSTOM_MSG_TYPE_STATUS;
  7522. custom_message_state = 0;
  7523. }
  7524. void temp_compensation_apply() {
  7525. int i_add;
  7526. int z_shift = 0;
  7527. float z_shift_mm;
  7528. if (calibration_status() == CALIBRATION_STATUS_CALIBRATED) {
  7529. if (target_temperature_bed % 10 == 0 && target_temperature_bed >= 60 && target_temperature_bed <= 100) {
  7530. i_add = (target_temperature_bed - 60) / 10;
  7531. EEPROM_read_B(EEPROM_PROBE_TEMP_SHIFT + i_add * 2, &z_shift);
  7532. z_shift_mm = z_shift / cs.axis_steps_per_unit[Z_AXIS];
  7533. }else {
  7534. //interpolation
  7535. z_shift_mm = temp_comp_interpolation(target_temperature_bed) / cs.axis_steps_per_unit[Z_AXIS];
  7536. }
  7537. printf_P(_N("\nZ shift applied:%.3f\n"), z_shift_mm);
  7538. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] - z_shift_mm, current_position[E_AXIS], homing_feedrate[Z_AXIS] / 40, active_extruder);
  7539. st_synchronize();
  7540. plan_set_z_position(current_position[Z_AXIS]);
  7541. }
  7542. else {
  7543. //we have no temp compensation data
  7544. }
  7545. }
  7546. float temp_comp_interpolation(float inp_temperature) {
  7547. //cubic spline interpolation
  7548. int n, i, j;
  7549. float h[10], a, b, c, d, sum, s[10] = { 0 }, x[10], F[10], f[10], m[10][10] = { 0 }, temp;
  7550. int shift[10];
  7551. int temp_C[10];
  7552. n = 6; //number of measured points
  7553. shift[0] = 0;
  7554. for (i = 0; i < n; i++) {
  7555. if (i>0) EEPROM_read_B(EEPROM_PROBE_TEMP_SHIFT + (i-1) * 2, &shift[i]); //read shift in steps from EEPROM
  7556. temp_C[i] = 50 + i * 10; //temperature in C
  7557. #ifdef PINDA_THERMISTOR
  7558. temp_C[i] = 35 + i * 5; //temperature in C
  7559. #else
  7560. temp_C[i] = 50 + i * 10; //temperature in C
  7561. #endif
  7562. x[i] = (float)temp_C[i];
  7563. f[i] = (float)shift[i];
  7564. }
  7565. if (inp_temperature < x[0]) return 0;
  7566. for (i = n - 1; i>0; i--) {
  7567. F[i] = (f[i] - f[i - 1]) / (x[i] - x[i - 1]);
  7568. h[i - 1] = x[i] - x[i - 1];
  7569. }
  7570. //*********** formation of h, s , f matrix **************
  7571. for (i = 1; i<n - 1; i++) {
  7572. m[i][i] = 2 * (h[i - 1] + h[i]);
  7573. if (i != 1) {
  7574. m[i][i - 1] = h[i - 1];
  7575. m[i - 1][i] = h[i - 1];
  7576. }
  7577. m[i][n - 1] = 6 * (F[i + 1] - F[i]);
  7578. }
  7579. //*********** forward elimination **************
  7580. for (i = 1; i<n - 2; i++) {
  7581. temp = (m[i + 1][i] / m[i][i]);
  7582. for (j = 1; j <= n - 1; j++)
  7583. m[i + 1][j] -= temp*m[i][j];
  7584. }
  7585. //*********** backward substitution *********
  7586. for (i = n - 2; i>0; i--) {
  7587. sum = 0;
  7588. for (j = i; j <= n - 2; j++)
  7589. sum += m[i][j] * s[j];
  7590. s[i] = (m[i][n - 1] - sum) / m[i][i];
  7591. }
  7592. for (i = 0; i<n - 1; i++)
  7593. if ((x[i] <= inp_temperature && inp_temperature <= x[i + 1]) || (i == n-2 && inp_temperature > x[i + 1])) {
  7594. a = (s[i + 1] - s[i]) / (6 * h[i]);
  7595. b = s[i] / 2;
  7596. c = (f[i + 1] - f[i]) / h[i] - (2 * h[i] * s[i] + s[i + 1] * h[i]) / 6;
  7597. d = f[i];
  7598. sum = a*pow((inp_temperature - x[i]), 3) + b*pow((inp_temperature - x[i]), 2) + c*(inp_temperature - x[i]) + d;
  7599. }
  7600. return sum;
  7601. }
  7602. #ifdef PINDA_THERMISTOR
  7603. float temp_compensation_pinda_thermistor_offset(float temperature_pinda)
  7604. {
  7605. if (!temp_cal_active) return 0;
  7606. if (!calibration_status_pinda()) return 0;
  7607. return temp_comp_interpolation(temperature_pinda) / cs.axis_steps_per_unit[Z_AXIS];
  7608. }
  7609. #endif //PINDA_THERMISTOR
  7610. void long_pause() //long pause print
  7611. {
  7612. st_synchronize();
  7613. start_pause_print = _millis();
  7614. //retract
  7615. current_position[E_AXIS] -= default_retraction;
  7616. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 400, active_extruder);
  7617. //lift z
  7618. current_position[Z_AXIS] += Z_PAUSE_LIFT;
  7619. if (current_position[Z_AXIS] > Z_MAX_POS) current_position[Z_AXIS] = Z_MAX_POS;
  7620. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 15, active_extruder);
  7621. //Move XY to side
  7622. current_position[X_AXIS] = X_PAUSE_POS;
  7623. current_position[Y_AXIS] = Y_PAUSE_POS;
  7624. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 50, active_extruder);
  7625. // Turn off the print fan
  7626. fanSpeed = 0;
  7627. st_synchronize();
  7628. }
  7629. void serialecho_temperatures() {
  7630. float tt = degHotend(active_extruder);
  7631. SERIAL_PROTOCOLPGM("T:");
  7632. SERIAL_PROTOCOL(tt);
  7633. SERIAL_PROTOCOLPGM(" E:");
  7634. SERIAL_PROTOCOL((int)active_extruder);
  7635. SERIAL_PROTOCOLPGM(" B:");
  7636. SERIAL_PROTOCOL_F(degBed(), 1);
  7637. SERIAL_PROTOCOLLN("");
  7638. }
  7639. extern uint32_t sdpos_atomic;
  7640. #ifdef UVLO_SUPPORT
  7641. void uvlo_()
  7642. {
  7643. unsigned long time_start = _millis();
  7644. bool sd_print = card.sdprinting;
  7645. // Conserve power as soon as possible.
  7646. disable_x();
  7647. disable_y();
  7648. #ifdef TMC2130
  7649. tmc2130_set_current_h(Z_AXIS, 20);
  7650. tmc2130_set_current_r(Z_AXIS, 20);
  7651. tmc2130_set_current_h(E_AXIS, 20);
  7652. tmc2130_set_current_r(E_AXIS, 20);
  7653. #endif //TMC2130
  7654. // Indicate that the interrupt has been triggered.
  7655. // SERIAL_ECHOLNPGM("UVLO");
  7656. // Read out the current Z motor microstep counter. This will be later used
  7657. // for reaching the zero full step before powering off.
  7658. uint16_t z_microsteps = 0;
  7659. #ifdef TMC2130
  7660. z_microsteps = tmc2130_rd_MSCNT(Z_TMC2130_CS);
  7661. #endif //TMC2130
  7662. // Calculate the file position, from which to resume this print.
  7663. long sd_position = sdpos_atomic; //atomic sd position of last command added in queue
  7664. {
  7665. uint16_t sdlen_planner = planner_calc_sd_length(); //length of sd commands in planner
  7666. sd_position -= sdlen_planner;
  7667. uint16_t sdlen_cmdqueue = cmdqueue_calc_sd_length(); //length of sd commands in cmdqueue
  7668. sd_position -= sdlen_cmdqueue;
  7669. if (sd_position < 0) sd_position = 0;
  7670. }
  7671. // Backup the feedrate in mm/min.
  7672. int feedrate_bckp = blocks_queued() ? (block_buffer[block_buffer_tail].nominal_speed * 60.f) : feedrate;
  7673. // After this call, the planner queue is emptied and the current_position is set to a current logical coordinate.
  7674. // The logical coordinate will likely differ from the machine coordinate if the skew calibration and mesh bed leveling
  7675. // are in action.
  7676. planner_abort_hard();
  7677. // Store the current extruder position.
  7678. eeprom_update_float((float*)(EEPROM_UVLO_CURRENT_POSITION_E), st_get_position_mm(E_AXIS));
  7679. eeprom_update_byte((uint8_t*)EEPROM_UVLO_E_ABS, axis_relative_modes[3]?0:1);
  7680. // Clean the input command queue.
  7681. cmdqueue_reset();
  7682. card.sdprinting = false;
  7683. // card.closefile();
  7684. // Enable stepper driver interrupt to move Z axis.
  7685. // This should be fine as the planner and command queues are empty and the SD card printing is disabled.
  7686. //FIXME one may want to disable serial lines at this point of time to avoid interfering with the command queue,
  7687. // though it should not happen that the command queue is touched as the plan_buffer_line always succeed without blocking.
  7688. sei();
  7689. plan_buffer_line(
  7690. current_position[X_AXIS],
  7691. current_position[Y_AXIS],
  7692. current_position[Z_AXIS],
  7693. current_position[E_AXIS] - default_retraction,
  7694. 95, active_extruder);
  7695. st_synchronize();
  7696. disable_e0();
  7697. plan_buffer_line(
  7698. current_position[X_AXIS],
  7699. current_position[Y_AXIS],
  7700. current_position[Z_AXIS] + UVLO_Z_AXIS_SHIFT + float((1024 - z_microsteps + 7) >> 4) / cs.axis_steps_per_unit[Z_AXIS],
  7701. current_position[E_AXIS] - default_retraction,
  7702. 40, active_extruder);
  7703. st_synchronize();
  7704. disable_e0();
  7705. disable_z();
  7706. // Move Z up to the next 0th full step.
  7707. // Write the file position.
  7708. eeprom_update_dword((uint32_t*)(EEPROM_FILE_POSITION), sd_position);
  7709. // Store the mesh bed leveling offsets. This is 2*7*7=98 bytes, which takes 98*3.4us=333us in worst case.
  7710. for (int8_t mesh_point = 0; mesh_point < MESH_NUM_X_POINTS * MESH_NUM_Y_POINTS; ++ mesh_point) {
  7711. uint8_t ix = mesh_point % MESH_NUM_X_POINTS; // from 0 to MESH_NUM_X_POINTS - 1
  7712. uint8_t iy = mesh_point / MESH_NUM_X_POINTS;
  7713. // Scale the z value to 1u resolution.
  7714. int16_t v = mbl.active ? int16_t(floor(mbl.z_values[iy][ix] * 1000.f + 0.5f)) : 0;
  7715. eeprom_update_word((uint16_t*)(EEPROM_UVLO_MESH_BED_LEVELING_FULL +2*mesh_point), *reinterpret_cast<uint16_t*>(&v));
  7716. }
  7717. // Read out the current Z motor microstep counter. This will be later used
  7718. // for reaching the zero full step before powering off.
  7719. eeprom_update_word((uint16_t*)(EEPROM_UVLO_Z_MICROSTEPS), z_microsteps);
  7720. // Store the current position.
  7721. eeprom_update_float((float*)(EEPROM_UVLO_CURRENT_POSITION + 0), current_position[X_AXIS]);
  7722. eeprom_update_float((float*)(EEPROM_UVLO_CURRENT_POSITION + 4), current_position[Y_AXIS]);
  7723. eeprom_update_float((float*)(EEPROM_UVLO_CURRENT_POSITION_Z), current_position[Z_AXIS]);
  7724. // Store the current feed rate, temperatures, fan speed and extruder multipliers (flow rates)
  7725. EEPROM_save_B(EEPROM_UVLO_FEEDRATE, &feedrate_bckp);
  7726. eeprom_update_byte((uint8_t*)EEPROM_UVLO_TARGET_HOTEND, target_temperature[active_extruder]);
  7727. eeprom_update_byte((uint8_t*)EEPROM_UVLO_TARGET_BED, target_temperature_bed);
  7728. eeprom_update_byte((uint8_t*)EEPROM_UVLO_FAN_SPEED, fanSpeed);
  7729. eeprom_update_float((float*)(EEPROM_EXTRUDER_MULTIPLIER_0), extruder_multiplier[0]);
  7730. #if EXTRUDERS > 1
  7731. eeprom_update_float((float*)(EEPROM_EXTRUDER_MULTIPLIER_1), extruder_multiplier[1]);
  7732. #if EXTRUDERS > 2
  7733. eeprom_update_float((float*)(EEPROM_EXTRUDER_MULTIPLIER_2), extruder_multiplier[2]);
  7734. #endif
  7735. #endif
  7736. eeprom_update_word((uint16_t*)(EEPROM_EXTRUDEMULTIPLY), (uint16_t)extrudemultiply);
  7737. // Finaly store the "power outage" flag.
  7738. if(sd_print) eeprom_update_byte((uint8_t*)EEPROM_UVLO, 1);
  7739. st_synchronize();
  7740. printf_P(_N("stps%d\n"), tmc2130_rd_MSCNT(Z_AXIS));
  7741. disable_z();
  7742. // Increment power failure counter
  7743. eeprom_update_byte((uint8_t*)EEPROM_POWER_COUNT, eeprom_read_byte((uint8_t*)EEPROM_POWER_COUNT) + 1);
  7744. eeprom_update_word((uint16_t*)EEPROM_POWER_COUNT_TOT, eeprom_read_word((uint16_t*)EEPROM_POWER_COUNT_TOT) + 1);
  7745. printf_P(_N("UVLO - end %d\n"), _millis() - time_start);
  7746. #if 0
  7747. // Move the print head to the side of the print until all the power stored in the power supply capacitors is depleted.
  7748. current_position[X_AXIS] = (current_position[X_AXIS] < 0.5f * (X_MIN_POS + X_MAX_POS)) ? X_MIN_POS : X_MAX_POS;
  7749. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 500, active_extruder);
  7750. st_synchronize();
  7751. #endif
  7752. wdt_enable(WDTO_500MS);
  7753. WRITE(BEEPER,HIGH);
  7754. while(1)
  7755. ;
  7756. }
  7757. void uvlo_tiny()
  7758. {
  7759. uint16_t z_microsteps=0;
  7760. // Conserve power as soon as possible.
  7761. disable_x();
  7762. disable_y();
  7763. disable_e0();
  7764. #ifdef TMC2130
  7765. tmc2130_set_current_h(Z_AXIS, 20);
  7766. tmc2130_set_current_r(Z_AXIS, 20);
  7767. #endif //TMC2130
  7768. // Read out the current Z motor microstep counter
  7769. #ifdef TMC2130
  7770. z_microsteps=tmc2130_rd_MSCNT(Z_TMC2130_CS);
  7771. #endif //TMC2130
  7772. planner_abort_hard();
  7773. disable_z();
  7774. // Finaly store the "power outage" flag.
  7775. //if(sd_print)
  7776. eeprom_update_byte((uint8_t*)EEPROM_UVLO,2);
  7777. eeprom_update_word((uint16_t*)(EEPROM_UVLO_Z_MICROSTEPS),z_microsteps);
  7778. // Increment power failure counter
  7779. eeprom_update_byte((uint8_t*)EEPROM_POWER_COUNT, eeprom_read_byte((uint8_t*)EEPROM_POWER_COUNT) + 1);
  7780. eeprom_update_word((uint16_t*)EEPROM_POWER_COUNT_TOT, eeprom_read_word((uint16_t*)EEPROM_POWER_COUNT_TOT) + 1);
  7781. wdt_enable(WDTO_500MS);
  7782. WRITE(BEEPER,HIGH);
  7783. while(1)
  7784. ;
  7785. }
  7786. #endif //UVLO_SUPPORT
  7787. #if (defined(FANCHECK) && defined(TACH_1) && (TACH_1 >-1))
  7788. void setup_fan_interrupt() {
  7789. //INT7
  7790. DDRE &= ~(1 << 7); //input pin
  7791. PORTE &= ~(1 << 7); //no internal pull-up
  7792. //start with sensing rising edge
  7793. EICRB &= ~(1 << 6);
  7794. EICRB |= (1 << 7);
  7795. //enable INT7 interrupt
  7796. EIMSK |= (1 << 7);
  7797. }
  7798. // The fan interrupt is triggered at maximum 325Hz (may be a bit more due to component tollerances),
  7799. // and it takes 4.24 us to process (the interrupt invocation overhead not taken into account).
  7800. ISR(INT7_vect) {
  7801. //measuring speed now works for fanSpeed > 18 (approximately), which is sufficient because MIN_PRINT_FAN_SPEED is higher
  7802. #ifdef FAN_SOFT_PWM
  7803. if (!fan_measuring || (fanSpeedSoftPwm < MIN_PRINT_FAN_SPEED)) return;
  7804. #else //FAN_SOFT_PWM
  7805. if (fanSpeed < MIN_PRINT_FAN_SPEED) return;
  7806. #endif //FAN_SOFT_PWM
  7807. if ((1 << 6) & EICRB) { //interrupt was triggered by rising edge
  7808. t_fan_rising_edge = millis_nc();
  7809. }
  7810. else { //interrupt was triggered by falling edge
  7811. if ((millis_nc() - t_fan_rising_edge) >= FAN_PULSE_WIDTH_LIMIT) {//this pulse was from sensor and not from pwm
  7812. fan_edge_counter[1] += 2; //we are currently counting all edges so lets count two edges for one pulse
  7813. }
  7814. }
  7815. EICRB ^= (1 << 6); //change edge
  7816. }
  7817. #endif
  7818. #ifdef UVLO_SUPPORT
  7819. void setup_uvlo_interrupt() {
  7820. DDRE &= ~(1 << 4); //input pin
  7821. PORTE &= ~(1 << 4); //no internal pull-up
  7822. //sensing falling edge
  7823. EICRB |= (1 << 0);
  7824. EICRB &= ~(1 << 1);
  7825. //enable INT4 interrupt
  7826. EIMSK |= (1 << 4);
  7827. }
  7828. ISR(INT4_vect) {
  7829. EIMSK &= ~(1 << 4); //disable INT4 interrupt to make sure that this code will be executed just once
  7830. SERIAL_ECHOLNPGM("INT4");
  7831. if(IS_SD_PRINTING && (!(eeprom_read_byte((uint8_t*)EEPROM_UVLO))) ) uvlo_();
  7832. if(eeprom_read_byte((uint8_t*)EEPROM_UVLO)) uvlo_tiny();
  7833. }
  7834. void recover_print(uint8_t automatic) {
  7835. char cmd[30];
  7836. lcd_update_enable(true);
  7837. lcd_update(2);
  7838. bool bTiny=(eeprom_read_byte((uint8_t*)EEPROM_UVLO)==2);
  7839. recover_machine_state_after_power_panic(bTiny); //recover position, temperatures and extrude_multipliers
  7840. // Lift the print head, so one may remove the excess priming material.
  7841. if(!bTiny&&(current_position[Z_AXIS]<25))
  7842. enquecommand_P(PSTR("G1 Z25 F800"));
  7843. // Home X and Y axes. Homing just X and Y shall not touch the babystep and the world2machine transformation status.
  7844. enquecommand_P(PSTR("G28 X Y"));
  7845. // Set the target bed and nozzle temperatures and wait.
  7846. sprintf_P(cmd, PSTR("M109 S%d"), target_temperature[active_extruder]);
  7847. enquecommand(cmd);
  7848. sprintf_P(cmd, PSTR("M190 S%d"), target_temperature_bed);
  7849. enquecommand(cmd);
  7850. enquecommand_P(PSTR("M83")); //E axis relative mode
  7851. //enquecommand_P(PSTR("G1 E5 F120")); //Extrude some filament to stabilize pessure
  7852. // If not automatically recoreverd (long power loss), extrude extra filament to stabilize
  7853. if(automatic == 0){
  7854. enquecommand_P(PSTR("G1 E5 F120")); //Extrude some filament to stabilize pessure
  7855. }
  7856. enquecommand_P(PSTR("G1 E" STRINGIFY(-default_retraction)" F480"));
  7857. printf_P(_N("After waiting for temp:\nCurrent pos X_AXIS:%.3f\nCurrent pos Y_AXIS:%.3f\n"), current_position[X_AXIS], current_position[Y_AXIS]);
  7858. // Restart the print.
  7859. restore_print_from_eeprom();
  7860. printf_P(_N("Current pos Z_AXIS:%.3f\nCurrent pos E_AXIS:%.3f\n"), current_position[Z_AXIS], current_position[E_AXIS]);
  7861. }
  7862. void recover_machine_state_after_power_panic(bool bTiny)
  7863. {
  7864. char cmd[30];
  7865. // 1) Recover the logical cordinates at the time of the power panic.
  7866. // The logical XY coordinates are needed to recover the machine Z coordinate corrected by the mesh bed leveling.
  7867. current_position[X_AXIS] = eeprom_read_float((float*)(EEPROM_UVLO_CURRENT_POSITION + 0));
  7868. current_position[Y_AXIS] = eeprom_read_float((float*)(EEPROM_UVLO_CURRENT_POSITION + 4));
  7869. // Recover the logical coordinate of the Z axis at the time of the power panic.
  7870. // The current position after power panic is moved to the next closest 0th full step.
  7871. if(bTiny){
  7872. current_position[Z_AXIS] = eeprom_read_float((float*)(EEPROM_UVLO_CURRENT_POSITION_Z)) +
  7873. UVLO_Z_AXIS_SHIFT + float((1024 - eeprom_read_word((uint16_t*)(EEPROM_UVLO_Z_MICROSTEPS)) + 7) >> 4) / cs.axis_steps_per_unit[Z_AXIS];
  7874. }
  7875. else{
  7876. current_position[Z_AXIS] = eeprom_read_float((float*)(EEPROM_UVLO_CURRENT_POSITION_Z)) +
  7877. UVLO_Z_AXIS_SHIFT + float((1024 - eeprom_read_word((uint16_t*)(EEPROM_UVLO_Z_MICROSTEPS)) + 7) >> 4) / cs.axis_steps_per_unit[Z_AXIS];
  7878. }
  7879. if (eeprom_read_byte((uint8_t*)EEPROM_UVLO_E_ABS)) {
  7880. current_position[E_AXIS] = eeprom_read_float((float*)(EEPROM_UVLO_CURRENT_POSITION_E));
  7881. sprintf_P(cmd, PSTR("G92 E"));
  7882. dtostrf(current_position[E_AXIS], 6, 3, cmd + strlen(cmd));
  7883. enquecommand(cmd);
  7884. }
  7885. memcpy(destination, current_position, sizeof(destination));
  7886. SERIAL_ECHOPGM("recover_machine_state_after_power_panic, initial ");
  7887. print_world_coordinates();
  7888. // 2) Initialize the logical to physical coordinate system transformation.
  7889. world2machine_initialize();
  7890. // 3) Restore the mesh bed leveling offsets. This is 2*7*7=98 bytes, which takes 98*3.4us=333us in worst case.
  7891. mbl.active = false;
  7892. for (int8_t mesh_point = 0; mesh_point < MESH_NUM_X_POINTS * MESH_NUM_Y_POINTS; ++ mesh_point) {
  7893. uint8_t ix = mesh_point % MESH_NUM_X_POINTS; // from 0 to MESH_NUM_X_POINTS - 1
  7894. uint8_t iy = mesh_point / MESH_NUM_X_POINTS;
  7895. // Scale the z value to 10u resolution.
  7896. int16_t v;
  7897. eeprom_read_block(&v, (void*)(EEPROM_UVLO_MESH_BED_LEVELING_FULL+2*mesh_point), 2);
  7898. if (v != 0)
  7899. mbl.active = true;
  7900. mbl.z_values[iy][ix] = float(v) * 0.001f;
  7901. }
  7902. // SERIAL_ECHOPGM("recover_machine_state_after_power_panic, initial ");
  7903. // print_mesh_bed_leveling_table();
  7904. // 4) Load the baby stepping value, which is expected to be active at the time of power panic.
  7905. // The baby stepping value is used to reset the physical Z axis when rehoming the Z axis.
  7906. babystep_load();
  7907. // 5) Set the physical positions from the logical positions using the world2machine transformation and the active bed leveling.
  7908. plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
  7909. // 6) Power up the motors, mark their positions as known.
  7910. //FIXME Verfiy, whether the X and Y axes should be powered up here, as they will later be re-homed anyway.
  7911. axis_known_position[X_AXIS] = true; enable_x();
  7912. axis_known_position[Y_AXIS] = true; enable_y();
  7913. axis_known_position[Z_AXIS] = true; enable_z();
  7914. SERIAL_ECHOPGM("recover_machine_state_after_power_panic, initial ");
  7915. print_physical_coordinates();
  7916. // 7) Recover the target temperatures.
  7917. target_temperature[active_extruder] = eeprom_read_byte((uint8_t*)EEPROM_UVLO_TARGET_HOTEND);
  7918. target_temperature_bed = eeprom_read_byte((uint8_t*)EEPROM_UVLO_TARGET_BED);
  7919. // 8) Recover extruder multipilers
  7920. extruder_multiplier[0] = eeprom_read_float((float*)(EEPROM_EXTRUDER_MULTIPLIER_0));
  7921. #if EXTRUDERS > 1
  7922. extruder_multiplier[1] = eeprom_read_float((float*)(EEPROM_EXTRUDER_MULTIPLIER_1));
  7923. #if EXTRUDERS > 2
  7924. extruder_multiplier[2] = eeprom_read_float((float*)(EEPROM_EXTRUDER_MULTIPLIER_2));
  7925. #endif
  7926. #endif
  7927. extrudemultiply = (int)eeprom_read_word((uint16_t*)(EEPROM_EXTRUDEMULTIPLY));
  7928. }
  7929. void restore_print_from_eeprom() {
  7930. int feedrate_rec;
  7931. uint8_t fan_speed_rec;
  7932. char cmd[30];
  7933. char filename[13];
  7934. uint8_t depth = 0;
  7935. char dir_name[9];
  7936. fan_speed_rec = eeprom_read_byte((uint8_t*)EEPROM_UVLO_FAN_SPEED);
  7937. EEPROM_read_B(EEPROM_UVLO_FEEDRATE, &feedrate_rec);
  7938. SERIAL_ECHOPGM("Feedrate:");
  7939. MYSERIAL.println(feedrate_rec);
  7940. depth = eeprom_read_byte((uint8_t*)EEPROM_DIR_DEPTH);
  7941. MYSERIAL.println(int(depth));
  7942. for (int i = 0; i < depth; i++) {
  7943. for (int j = 0; j < 8; j++) {
  7944. dir_name[j] = eeprom_read_byte((uint8_t*)EEPROM_DIRS + j + 8 * i);
  7945. }
  7946. dir_name[8] = '\0';
  7947. MYSERIAL.println(dir_name);
  7948. strcpy(dir_names[i], dir_name);
  7949. card.chdir(dir_name);
  7950. }
  7951. for (int i = 0; i < 8; i++) {
  7952. filename[i] = eeprom_read_byte((uint8_t*)EEPROM_FILENAME + i);
  7953. }
  7954. filename[8] = '\0';
  7955. MYSERIAL.print(filename);
  7956. strcat_P(filename, PSTR(".gco"));
  7957. sprintf_P(cmd, PSTR("M23 %s"), filename);
  7958. enquecommand(cmd);
  7959. uint32_t position = eeprom_read_dword((uint32_t*)(EEPROM_FILE_POSITION));
  7960. SERIAL_ECHOPGM("Position read from eeprom:");
  7961. MYSERIAL.println(position);
  7962. // E axis relative mode.
  7963. enquecommand_P(PSTR("M83"));
  7964. // Move to the XY print position in logical coordinates, where the print has been killed.
  7965. strcpy_P(cmd, PSTR("G1 X")); strcat(cmd, ftostr32(eeprom_read_float((float*)(EEPROM_UVLO_CURRENT_POSITION + 0))));
  7966. strcat_P(cmd, PSTR(" Y")); strcat(cmd, ftostr32(eeprom_read_float((float*)(EEPROM_UVLO_CURRENT_POSITION + 4))));
  7967. strcat_P(cmd, PSTR(" F2000"));
  7968. enquecommand(cmd);
  7969. // Move the Z axis down to the print, in logical coordinates.
  7970. strcpy_P(cmd, PSTR("G1 Z")); strcat(cmd, ftostr32(current_position[Z_AXIS] - (UVLO_Z_AXIS_SHIFT +
  7971. float((1024 - eeprom_read_word((uint16_t*)(EEPROM_UVLO_Z_MICROSTEPS)) + 7) >> 4) / cs.axis_steps_per_unit[Z_AXIS])));
  7972. enquecommand(cmd);
  7973. // Unretract.
  7974. enquecommand_P(PSTR("G1 E" STRINGIFY(2*default_retraction)" F480"));
  7975. // Set the feedrate saved at the power panic.
  7976. sprintf_P(cmd, PSTR("G1 F%d"), feedrate_rec);
  7977. enquecommand(cmd);
  7978. if (eeprom_read_byte((uint8_t*)EEPROM_UVLO_E_ABS))
  7979. {
  7980. enquecommand_P(PSTR("M82")); //E axis abslute mode
  7981. }
  7982. // Set the fan speed saved at the power panic.
  7983. strcpy_P(cmd, PSTR("M106 S"));
  7984. strcat(cmd, itostr3(int(fan_speed_rec)));
  7985. enquecommand(cmd);
  7986. // Set a position in the file.
  7987. sprintf_P(cmd, PSTR("M26 S%lu"), position);
  7988. enquecommand(cmd);
  7989. enquecommand_P(PSTR("G4 S0"));
  7990. enquecommand_P(PSTR("PRUSA uvlo"));
  7991. }
  7992. #endif //UVLO_SUPPORT
  7993. //! @brief Immediately stop print moves
  7994. //!
  7995. //! Immediately stop print moves, save current extruder temperature and position to RAM.
  7996. //! If printing from sd card, position in file is saved.
  7997. //! If printing from USB, line number is saved.
  7998. //!
  7999. //! @param z_move
  8000. //! @param e_move
  8001. void stop_and_save_print_to_ram(float z_move, float e_move)
  8002. {
  8003. if (saved_printing) return;
  8004. #if 0
  8005. unsigned char nplanner_blocks;
  8006. #endif
  8007. unsigned char nlines;
  8008. uint16_t sdlen_planner;
  8009. uint16_t sdlen_cmdqueue;
  8010. cli();
  8011. if (card.sdprinting) {
  8012. #if 0
  8013. nplanner_blocks = number_of_blocks();
  8014. #endif
  8015. saved_sdpos = sdpos_atomic; //atomic sd position of last command added in queue
  8016. sdlen_planner = planner_calc_sd_length(); //length of sd commands in planner
  8017. saved_sdpos -= sdlen_planner;
  8018. sdlen_cmdqueue = cmdqueue_calc_sd_length(); //length of sd commands in cmdqueue
  8019. saved_sdpos -= sdlen_cmdqueue;
  8020. saved_printing_type = PRINTING_TYPE_SD;
  8021. }
  8022. else if (is_usb_printing) { //reuse saved_sdpos for storing line number
  8023. saved_sdpos = gcode_LastN; //start with line number of command added recently to cmd queue
  8024. //reuse planner_calc_sd_length function for getting number of lines of commands in planner:
  8025. nlines = planner_calc_sd_length(); //number of lines of commands in planner
  8026. saved_sdpos -= nlines;
  8027. saved_sdpos -= buflen; //number of blocks in cmd buffer
  8028. saved_printing_type = PRINTING_TYPE_USB;
  8029. }
  8030. else {
  8031. saved_printing_type = PRINTING_TYPE_NONE;
  8032. //not sd printing nor usb printing
  8033. }
  8034. #if 0
  8035. SERIAL_ECHOPGM("SDPOS_ATOMIC="); MYSERIAL.println(sdpos_atomic, DEC);
  8036. SERIAL_ECHOPGM("SDPOS="); MYSERIAL.println(card.get_sdpos(), DEC);
  8037. SERIAL_ECHOPGM("SDLEN_PLAN="); MYSERIAL.println(sdlen_planner, DEC);
  8038. SERIAL_ECHOPGM("SDLEN_CMDQ="); MYSERIAL.println(sdlen_cmdqueue, DEC);
  8039. SERIAL_ECHOPGM("PLANNERBLOCKS="); MYSERIAL.println(int(nplanner_blocks), DEC);
  8040. SERIAL_ECHOPGM("SDSAVED="); MYSERIAL.println(saved_sdpos, DEC);
  8041. //SERIAL_ECHOPGM("SDFILELEN="); MYSERIAL.println(card.fileSize(), DEC);
  8042. {
  8043. card.setIndex(saved_sdpos);
  8044. SERIAL_ECHOLNPGM("Content of planner buffer: ");
  8045. for (unsigned int idx = 0; idx < sdlen_planner; ++ idx)
  8046. MYSERIAL.print(char(card.get()));
  8047. SERIAL_ECHOLNPGM("Content of command buffer: ");
  8048. for (unsigned int idx = 0; idx < sdlen_cmdqueue; ++ idx)
  8049. MYSERIAL.print(char(card.get()));
  8050. SERIAL_ECHOLNPGM("End of command buffer");
  8051. }
  8052. {
  8053. // Print the content of the planner buffer, line by line:
  8054. card.setIndex(saved_sdpos);
  8055. int8_t iline = 0;
  8056. for (unsigned char idx = block_buffer_tail; idx != block_buffer_head; idx = (idx + 1) & (BLOCK_BUFFER_SIZE - 1), ++ iline) {
  8057. SERIAL_ECHOPGM("Planner line (from file): ");
  8058. MYSERIAL.print(int(iline), DEC);
  8059. SERIAL_ECHOPGM(", length: ");
  8060. MYSERIAL.print(block_buffer[idx].sdlen, DEC);
  8061. SERIAL_ECHOPGM(", steps: (");
  8062. MYSERIAL.print(block_buffer[idx].steps_x, DEC);
  8063. SERIAL_ECHOPGM(",");
  8064. MYSERIAL.print(block_buffer[idx].steps_y, DEC);
  8065. SERIAL_ECHOPGM(",");
  8066. MYSERIAL.print(block_buffer[idx].steps_z, DEC);
  8067. SERIAL_ECHOPGM(",");
  8068. MYSERIAL.print(block_buffer[idx].steps_e, DEC);
  8069. SERIAL_ECHOPGM("), events: ");
  8070. MYSERIAL.println(block_buffer[idx].step_event_count, DEC);
  8071. for (int len = block_buffer[idx].sdlen; len > 0; -- len)
  8072. MYSERIAL.print(char(card.get()));
  8073. }
  8074. }
  8075. {
  8076. // Print the content of the command buffer, line by line:
  8077. int8_t iline = 0;
  8078. union {
  8079. struct {
  8080. char lo;
  8081. char hi;
  8082. } lohi;
  8083. uint16_t value;
  8084. } sdlen_single;
  8085. int _bufindr = bufindr;
  8086. for (int _buflen = buflen; _buflen > 0; ++ iline) {
  8087. if (cmdbuffer[_bufindr] == CMDBUFFER_CURRENT_TYPE_SDCARD) {
  8088. sdlen_single.lohi.lo = cmdbuffer[_bufindr + 1];
  8089. sdlen_single.lohi.hi = cmdbuffer[_bufindr + 2];
  8090. }
  8091. SERIAL_ECHOPGM("Buffer line (from buffer): ");
  8092. MYSERIAL.print(int(iline), DEC);
  8093. SERIAL_ECHOPGM(", type: ");
  8094. MYSERIAL.print(int(cmdbuffer[_bufindr]), DEC);
  8095. SERIAL_ECHOPGM(", len: ");
  8096. MYSERIAL.println(sdlen_single.value, DEC);
  8097. // Print the content of the buffer line.
  8098. MYSERIAL.println(cmdbuffer + _bufindr + CMDHDRSIZE);
  8099. SERIAL_ECHOPGM("Buffer line (from file): ");
  8100. MYSERIAL.println(int(iline), DEC);
  8101. for (; sdlen_single.value > 0; -- sdlen_single.value)
  8102. MYSERIAL.print(char(card.get()));
  8103. if (-- _buflen == 0)
  8104. break;
  8105. // First skip the current command ID and iterate up to the end of the string.
  8106. for (_bufindr += CMDHDRSIZE; cmdbuffer[_bufindr] != 0; ++ _bufindr) ;
  8107. // Second, skip the end of string null character and iterate until a nonzero command ID is found.
  8108. for (++ _bufindr; _bufindr < sizeof(cmdbuffer) && cmdbuffer[_bufindr] == 0; ++ _bufindr) ;
  8109. // If the end of the buffer was empty,
  8110. if (_bufindr == sizeof(cmdbuffer)) {
  8111. // skip to the start and find the nonzero command.
  8112. for (_bufindr = 0; cmdbuffer[_bufindr] == 0; ++ _bufindr) ;
  8113. }
  8114. }
  8115. }
  8116. #endif
  8117. #if 0
  8118. saved_feedrate2 = feedrate; //save feedrate
  8119. #else
  8120. // Try to deduce the feedrate from the first block of the planner.
  8121. // Speed is in mm/min.
  8122. saved_feedrate2 = blocks_queued() ? (block_buffer[block_buffer_tail].nominal_speed * 60.f) : feedrate;
  8123. #endif
  8124. planner_abort_hard(); //abort printing
  8125. memcpy(saved_pos, current_position, sizeof(saved_pos));
  8126. saved_active_extruder = active_extruder; //save active_extruder
  8127. saved_extruder_temperature = degTargetHotend(active_extruder);
  8128. saved_extruder_under_pressure = extruder_under_pressure; //extruder under pressure flag - currently unused
  8129. saved_extruder_relative_mode = axis_relative_modes[E_AXIS];
  8130. saved_fanSpeed = fanSpeed;
  8131. cmdqueue_reset(); //empty cmdqueue
  8132. card.sdprinting = false;
  8133. // card.closefile();
  8134. saved_printing = true;
  8135. // We may have missed a stepper timer interrupt. Be safe than sorry, reset the stepper timer before re-enabling interrupts.
  8136. st_reset_timer();
  8137. sei();
  8138. if ((z_move != 0) || (e_move != 0)) { // extruder or z move
  8139. #if 1
  8140. // Rather than calling plan_buffer_line directly, push the move into the command queue,
  8141. char buf[48];
  8142. // First unretract (relative extrusion)
  8143. if(!saved_extruder_relative_mode){
  8144. strcpy_P(buf, PSTR("M83"));
  8145. enquecommand(buf, false);
  8146. }
  8147. //retract 45mm/s
  8148. strcpy_P(buf, PSTR("G1 E"));
  8149. dtostrf(e_move, 6, 3, buf + strlen(buf));
  8150. strcat_P(buf, PSTR(" F"));
  8151. dtostrf(2700, 8, 3, buf + strlen(buf));
  8152. enquecommand(buf, false);
  8153. // Then lift Z axis
  8154. strcpy_P(buf, PSTR("G1 Z"));
  8155. dtostrf(saved_pos[Z_AXIS] + z_move, 8, 3, buf + strlen(buf));
  8156. strcat_P(buf, PSTR(" F"));
  8157. dtostrf(homing_feedrate[Z_AXIS], 8, 3, buf + strlen(buf));
  8158. // At this point the command queue is empty.
  8159. enquecommand(buf, false);
  8160. // If this call is invoked from the main Arduino loop() function, let the caller know that the command
  8161. // in the command queue is not the original command, but a new one, so it should not be removed from the queue.
  8162. repeatcommand_front();
  8163. #else
  8164. plan_buffer_line(saved_pos[X_AXIS], saved_pos[Y_AXIS], saved_pos[Z_AXIS] + z_move, saved_pos[E_AXIS] + e_move, homing_feedrate[Z_AXIS], active_extruder);
  8165. st_synchronize(); //wait moving
  8166. memcpy(current_position, saved_pos, sizeof(saved_pos));
  8167. memcpy(destination, current_position, sizeof(destination));
  8168. #endif
  8169. }
  8170. }
  8171. //! @brief Restore print from ram
  8172. //!
  8173. //! Restore print saved by stop_and_save_print_to_ram(). Is blocking,
  8174. //! waits for extruder temperature restore, then restores position and continues
  8175. //! print moves.
  8176. //! Internaly lcd_update() is called by wait_for_heater().
  8177. //!
  8178. //! @param e_move
  8179. void restore_print_from_ram_and_continue(float e_move)
  8180. {
  8181. if (!saved_printing) return;
  8182. // for (int axis = X_AXIS; axis <= E_AXIS; axis++)
  8183. // current_position[axis] = st_get_position_mm(axis);
  8184. active_extruder = saved_active_extruder; //restore active_extruder
  8185. if (saved_extruder_temperature) {
  8186. setTargetHotendSafe(saved_extruder_temperature, saved_active_extruder);
  8187. heating_status = 1;
  8188. wait_for_heater(_millis(), saved_active_extruder);
  8189. heating_status = 2;
  8190. }
  8191. feedrate = saved_feedrate2; //restore feedrate
  8192. axis_relative_modes[E_AXIS] = saved_extruder_relative_mode;
  8193. fanSpeed = saved_fanSpeed;
  8194. float e = saved_pos[E_AXIS] - e_move;
  8195. plan_set_e_position(e);
  8196. //first move print head in XY to the saved position:
  8197. plan_buffer_line(saved_pos[X_AXIS], saved_pos[Y_AXIS], current_position[Z_AXIS], saved_pos[E_AXIS] - e_move, homing_feedrate[Z_AXIS]/13, active_extruder);
  8198. st_synchronize();
  8199. //then move Z
  8200. plan_buffer_line(saved_pos[X_AXIS], saved_pos[Y_AXIS], saved_pos[Z_AXIS], saved_pos[E_AXIS] - e_move, homing_feedrate[Z_AXIS]/13, active_extruder);
  8201. st_synchronize();
  8202. //and finaly unretract (35mm/s)
  8203. plan_buffer_line(saved_pos[X_AXIS], saved_pos[Y_AXIS], saved_pos[Z_AXIS], saved_pos[E_AXIS], 35, active_extruder);
  8204. st_synchronize();
  8205. memcpy(current_position, saved_pos, sizeof(saved_pos));
  8206. memcpy(destination, current_position, sizeof(destination));
  8207. if (saved_printing_type == PRINTING_TYPE_SD) { //was sd printing
  8208. card.setIndex(saved_sdpos);
  8209. sdpos_atomic = saved_sdpos;
  8210. card.sdprinting = true;
  8211. printf_P(PSTR("ok\n")); //dummy response because of octoprint is waiting for this
  8212. }
  8213. else if (saved_printing_type == PRINTING_TYPE_USB) { //was usb printing
  8214. gcode_LastN = saved_sdpos; //saved_sdpos was reused for storing line number when usb printing
  8215. serial_count = 0;
  8216. FlushSerialRequestResend();
  8217. }
  8218. else {
  8219. //not sd printing nor usb printing
  8220. }
  8221. lcd_setstatuspgm(_T(WELCOME_MSG));
  8222. saved_printing = false;
  8223. }
  8224. void print_world_coordinates()
  8225. {
  8226. printf_P(_N("world coordinates: (%.3f, %.3f, %.3f)\n"), current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS]);
  8227. }
  8228. void print_physical_coordinates()
  8229. {
  8230. printf_P(_N("physical coordinates: (%.3f, %.3f, %.3f)\n"), st_get_position_mm(X_AXIS), st_get_position_mm(Y_AXIS), st_get_position_mm(Z_AXIS));
  8231. }
  8232. void print_mesh_bed_leveling_table()
  8233. {
  8234. SERIAL_ECHOPGM("mesh bed leveling: ");
  8235. for (int8_t y = 0; y < MESH_NUM_Y_POINTS; ++ y)
  8236. for (int8_t x = 0; x < MESH_NUM_Y_POINTS; ++ x) {
  8237. MYSERIAL.print(mbl.z_values[y][x], 3);
  8238. SERIAL_ECHOPGM(" ");
  8239. }
  8240. SERIAL_ECHOLNPGM("");
  8241. }
  8242. uint16_t print_time_remaining() {
  8243. uint16_t print_t = PRINT_TIME_REMAINING_INIT;
  8244. #ifdef TMC2130
  8245. if (SilentModeMenu == SILENT_MODE_OFF) print_t = print_time_remaining_normal;
  8246. else print_t = print_time_remaining_silent;
  8247. #else
  8248. print_t = print_time_remaining_normal;
  8249. #endif //TMC2130
  8250. if ((print_t != PRINT_TIME_REMAINING_INIT) && (feedmultiply != 0)) print_t = 100ul * print_t / feedmultiply;
  8251. return print_t;
  8252. }
  8253. uint8_t calc_percent_done()
  8254. {
  8255. //in case that we have information from M73 gcode return percentage counted by slicer, else return percentage counted as byte_printed/filesize
  8256. uint8_t percent_done = 0;
  8257. #ifdef TMC2130
  8258. if (SilentModeMenu == SILENT_MODE_OFF && print_percent_done_normal <= 100) {
  8259. percent_done = print_percent_done_normal;
  8260. }
  8261. else if (print_percent_done_silent <= 100) {
  8262. percent_done = print_percent_done_silent;
  8263. }
  8264. #else
  8265. if (print_percent_done_normal <= 100) {
  8266. percent_done = print_percent_done_normal;
  8267. }
  8268. #endif //TMC2130
  8269. else {
  8270. percent_done = card.percentDone();
  8271. }
  8272. return percent_done;
  8273. }
  8274. static void print_time_remaining_init()
  8275. {
  8276. print_time_remaining_normal = PRINT_TIME_REMAINING_INIT;
  8277. print_time_remaining_silent = PRINT_TIME_REMAINING_INIT;
  8278. print_percent_done_normal = PRINT_PERCENT_DONE_INIT;
  8279. print_percent_done_silent = PRINT_PERCENT_DONE_INIT;
  8280. }
  8281. void load_filament_final_feed()
  8282. {
  8283. current_position[E_AXIS]+= FILAMENTCHANGE_FINALFEED;
  8284. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], FILAMENTCHANGE_EFEED_FINAL, active_extruder);
  8285. }
  8286. //! @brief Wait for user to check the state
  8287. //! @par nozzle_temp nozzle temperature to load filament
  8288. void M600_check_state(float nozzle_temp)
  8289. {
  8290. lcd_change_fil_state = 0;
  8291. while (lcd_change_fil_state != 1)
  8292. {
  8293. lcd_change_fil_state = 0;
  8294. KEEPALIVE_STATE(PAUSED_FOR_USER);
  8295. lcd_alright();
  8296. KEEPALIVE_STATE(IN_HANDLER);
  8297. switch(lcd_change_fil_state)
  8298. {
  8299. // Filament failed to load so load it again
  8300. case 2:
  8301. if (mmu_enabled)
  8302. mmu_M600_load_filament(false, nozzle_temp); //nonautomatic load; change to "wrong filament loaded" option?
  8303. else
  8304. M600_load_filament_movements();
  8305. break;
  8306. // Filament loaded properly but color is not clear
  8307. case 3:
  8308. st_synchronize();
  8309. load_filament_final_feed();
  8310. lcd_loading_color();
  8311. st_synchronize();
  8312. break;
  8313. // Everything good
  8314. default:
  8315. lcd_change_success();
  8316. break;
  8317. }
  8318. }
  8319. }
  8320. //! @brief Wait for user action
  8321. //!
  8322. //! Beep, manage nozzle heater and wait for user to start unload filament
  8323. //! If times out, active extruder temperature is set to 0.
  8324. //!
  8325. //! @param HotendTempBckp Temperature to be restored for active extruder, after user resolves MMU problem.
  8326. void M600_wait_for_user(float HotendTempBckp) {
  8327. KEEPALIVE_STATE(PAUSED_FOR_USER);
  8328. int counterBeep = 0;
  8329. unsigned long waiting_start_time = _millis();
  8330. uint8_t wait_for_user_state = 0;
  8331. lcd_display_message_fullscreen_P(_T(MSG_PRESS_TO_UNLOAD));
  8332. bool bFirst=true;
  8333. while (!(wait_for_user_state == 0 && lcd_clicked())){
  8334. manage_heater();
  8335. manage_inactivity(true);
  8336. #if BEEPER > 0
  8337. if (counterBeep == 500) {
  8338. counterBeep = 0;
  8339. }
  8340. SET_OUTPUT(BEEPER);
  8341. if (counterBeep == 0) {
  8342. if((eSoundMode==e_SOUND_MODE_LOUD)||((eSoundMode==e_SOUND_MODE_ONCE)&&bFirst))
  8343. {
  8344. bFirst=false;
  8345. WRITE(BEEPER, HIGH);
  8346. }
  8347. }
  8348. if (counterBeep == 20) {
  8349. WRITE(BEEPER, LOW);
  8350. }
  8351. counterBeep++;
  8352. #endif //BEEPER > 0
  8353. switch (wait_for_user_state) {
  8354. case 0: //nozzle is hot, waiting for user to press the knob to unload filament
  8355. delay_keep_alive(4);
  8356. if (_millis() > waiting_start_time + (unsigned long)M600_TIMEOUT * 1000) {
  8357. lcd_display_message_fullscreen_P(_i("Press knob to preheat nozzle and continue."));////MSG_PRESS_TO_PREHEAT c=20 r=4
  8358. wait_for_user_state = 1;
  8359. setAllTargetHotends(0);
  8360. st_synchronize();
  8361. disable_e0();
  8362. disable_e1();
  8363. disable_e2();
  8364. }
  8365. break;
  8366. case 1: //nozzle target temperature is set to zero, waiting for user to start nozzle preheat
  8367. delay_keep_alive(4);
  8368. if (lcd_clicked()) {
  8369. setTargetHotend(HotendTempBckp, active_extruder);
  8370. lcd_wait_for_heater();
  8371. wait_for_user_state = 2;
  8372. }
  8373. break;
  8374. case 2: //waiting for nozzle to reach target temperature
  8375. if (abs(degTargetHotend(active_extruder) - degHotend(active_extruder)) < 1) {
  8376. lcd_display_message_fullscreen_P(_T(MSG_PRESS_TO_UNLOAD));
  8377. waiting_start_time = _millis();
  8378. wait_for_user_state = 0;
  8379. }
  8380. else {
  8381. counterBeep = 20; //beeper will be inactive during waiting for nozzle preheat
  8382. lcd_set_cursor(1, 4);
  8383. lcd_print(ftostr3(degHotend(active_extruder)));
  8384. }
  8385. break;
  8386. }
  8387. }
  8388. WRITE(BEEPER, LOW);
  8389. }
  8390. void M600_load_filament_movements()
  8391. {
  8392. #ifdef SNMM
  8393. display_loading();
  8394. do
  8395. {
  8396. current_position[E_AXIS] += 0.002;
  8397. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 500, active_extruder);
  8398. delay_keep_alive(2);
  8399. }
  8400. while (!lcd_clicked());
  8401. st_synchronize();
  8402. current_position[E_AXIS] += bowden_length[mmu_extruder];
  8403. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000, active_extruder);
  8404. current_position[E_AXIS] += FIL_LOAD_LENGTH - 60;
  8405. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 1400, active_extruder);
  8406. current_position[E_AXIS] += 40;
  8407. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 400, active_extruder);
  8408. current_position[E_AXIS] += 10;
  8409. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 50, active_extruder);
  8410. #else
  8411. current_position[E_AXIS]+= FILAMENTCHANGE_FIRSTFEED ;
  8412. plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], FILAMENTCHANGE_EFEED_FIRST, active_extruder);
  8413. #endif
  8414. load_filament_final_feed();
  8415. lcd_loading_filament();
  8416. st_synchronize();
  8417. }
  8418. void M600_load_filament() {
  8419. //load filament for single material and SNMM
  8420. lcd_wait_interact();
  8421. //load_filament_time = _millis();
  8422. KEEPALIVE_STATE(PAUSED_FOR_USER);
  8423. #ifdef PAT9125
  8424. fsensor_autoload_check_start();
  8425. #endif //PAT9125
  8426. while(!lcd_clicked())
  8427. {
  8428. manage_heater();
  8429. manage_inactivity(true);
  8430. #ifdef FILAMENT_SENSOR
  8431. if (fsensor_check_autoload())
  8432. {
  8433. if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
  8434. _tone(BEEPER, 1000);
  8435. delay_keep_alive(50);
  8436. _noTone(BEEPER);
  8437. break;
  8438. }
  8439. #endif //FILAMENT_SENSOR
  8440. }
  8441. #ifdef PAT9125
  8442. fsensor_autoload_check_stop();
  8443. #endif //PAT9125
  8444. KEEPALIVE_STATE(IN_HANDLER);
  8445. #ifdef FSENSOR_QUALITY
  8446. fsensor_oq_meassure_start(70);
  8447. #endif //FSENSOR_QUALITY
  8448. M600_load_filament_movements();
  8449. if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
  8450. _tone(BEEPER, 500);
  8451. delay_keep_alive(50);
  8452. _noTone(BEEPER);
  8453. #ifdef FSENSOR_QUALITY
  8454. fsensor_oq_meassure_stop();
  8455. if (!fsensor_oq_result())
  8456. {
  8457. bool disable = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Fil. sensor response is poor, disable it?"), false, true);
  8458. lcd_update_enable(true);
  8459. lcd_update(2);
  8460. if (disable)
  8461. fsensor_disable();
  8462. }
  8463. #endif //FSENSOR_QUALITY
  8464. lcd_update_enable(false);
  8465. }
  8466. //! @brief Wait for click
  8467. //!
  8468. //! Set
  8469. void marlin_wait_for_click()
  8470. {
  8471. int8_t busy_state_backup = busy_state;
  8472. KEEPALIVE_STATE(PAUSED_FOR_USER);
  8473. lcd_consume_click();
  8474. while(!lcd_clicked())
  8475. {
  8476. manage_heater();
  8477. manage_inactivity(true);
  8478. lcd_update(0);
  8479. }
  8480. KEEPALIVE_STATE(busy_state_backup);
  8481. }
  8482. #define FIL_LOAD_LENGTH 60