PrusaFirmware/Firmware/w25x20cl.c

//w25x20cl.c

#include "w25x20cl.h"
#include <avr/io.h>
#include <avr/pgmspace.h>
#include "io_atmega2560.h"
#include "spi.h"

#define _MFRID             0xEF
#define _DEVID             0x11

#define _CMD_ENABLE_WR     0x06
#define _CMD_ENABLE_WR_VSR 0x50
#define _CMD_DISABLE_WR    0x04
#define _CMD_RD_STATUS_REG 0x05
#define _CMD_WR_STATUS_REG 0x01
#define _CMD_RD_DATA       0x03
#define _CMD_RD_FAST       0x0b
#define _CMD_RD_FAST_D_O   0x3b
#define _CMD_RD_FAST_D_IO  0xbb
#define _CMD_PAGE_PROGRAM  0x02
#define _CMD_SECTOR_ERASE  0x20
#define _CMD_BLOCK32_ERASE 0x52
#define _CMD_BLOCK64_ERASE 0xd8
#define _CMD_CHIP_ERASE    0xc7
#define _CMD_CHIP_ERASE2   0x60
#define _CMD_PWR_DOWN      0xb9
#define _CMD_PWR_DOWN_REL  0xab
#define _CMD_MFRID_DEVID   0x90
#define _CMD_MFRID_DEVID_D 0x92
#define _CMD_JEDEC_ID      0x9f
#define _CMD_RD_UID        0x4b

#define _CS_LOW()  PORT(W25X20CL_PIN_CS) &= ~__MSK(W25X20CL_PIN_CS)
#define _CS_HIGH() PORT(W25X20CL_PIN_CS) |= __MSK(W25X20CL_PIN_CS)

//#define _SPI_TX swspi_tx
//#define _SPI_RX swspi_rx
#define _SPI_TX(b) spi_txrx(b)
#define _SPI_RX() spi_txrx(0xff)


int w25x20cl_mfrid_devid(void);


int8_t w25x20cl_ini(void)
{
	PIN_OUT(W25X20CL_PIN_CS);
	_CS_HIGH();
	if (!w25x20cl_mfrid_devid()) return 0;
	return 1;
}

void w25x20cl_enable_wr(void)
{
	_CS_LOW();
	_SPI_TX(_CMD_ENABLE_WR);             // send command 0x06
	_CS_HIGH();
}

void w25x20cl_disable_wr(void)
{
	_CS_LOW();
	_SPI_TX(_CMD_DISABLE_WR);            // send command 0x04
	_CS_HIGH();
}

uint8_t w25x20cl_rd_status_reg(void)
{
	_CS_LOW();
	_SPI_TX(_CMD_RD_STATUS_REG);         // send command 0x90
	uint8_t val = _SPI_RX();             // receive value
	_CS_HIGH();
	return val;
}

void w25x20cl_wr_status_reg(uint8_t val)
{
	_CS_LOW();
	_SPI_TX(_CMD_WR_STATUS_REG);         // send command 0x90
	_SPI_TX(val);                        // send value
	_CS_HIGH();
}

void w25x20cl_rd_data(uint32_t addr, uint8_t* data, uint16_t cnt)
{
	_CS_LOW();
	_SPI_TX(_CMD_RD_DATA);               // send command 0x03
	_SPI_TX(((uint8_t*)&addr)[2]);       // send addr bits 16..23
	_SPI_TX(((uint8_t*)&addr)[1]);       // send addr bits 8..15
	_SPI_TX(((uint8_t*)&addr)[0]);       // send addr bits 0..7
	while (cnt--)                        // receive data
		*(data++) = _SPI_RX();
	_CS_HIGH();
}

void w25x20cl_page_program(uint32_t addr, uint8_t* data, uint16_t cnt)
{
	_CS_LOW();
	_SPI_TX(_CMD_PAGE_PROGRAM);          // send command 0x02
	_SPI_TX(((uint8_t*)&addr)[2]);       // send addr bits 16..23
	_SPI_TX(((uint8_t*)&addr)[1]);       // send addr bits 8..15
	_SPI_TX(((uint8_t*)&addr)[0]);       // send addr bits 0..7
	while (cnt--)                        // send data
		_SPI_TX(*(data++));
	_CS_HIGH();
}

void w25x20cl_page_program_P(uint32_t addr, uint8_t* data, uint16_t cnt)
{
	_CS_LOW();
	_SPI_TX(_CMD_PAGE_PROGRAM);          // send command 0x02
	_SPI_TX(((uint8_t*)&addr)[2]);       // send addr bits 16..23
	_SPI_TX(((uint8_t*)&addr)[1]);       // send addr bits 8..15
	_SPI_TX(((uint8_t*)&addr)[0]);       // send addr bits 0..7
	while (cnt--)                        // send data
		_SPI_TX(pgm_read_byte(data++));
	_CS_HIGH();
}

void w25x20cl_erase(uint8_t cmd, uint32_t addr)
{
	_CS_LOW();
	_SPI_TX(_CMD_SECTOR_ERASE);          // send command 0x20
	_SPI_TX(((uint8_t*)&addr)[2]);       // send addr bits 16..23
	_SPI_TX(((uint8_t*)&addr)[1]);       // send addr bits 8..15
	_SPI_TX(((uint8_t*)&addr)[0]);       // send addr bits 0..7
	_CS_HIGH();
}

void w25x20cl_sector_erase(uint32_t addr)
{
	return w25x20cl_erase(_CMD_SECTOR_ERASE, addr);
}

void w25x20cl_block32_erase(uint32_t addr)
{
	return w25x20cl_erase(_CMD_BLOCK32_ERASE, addr);
}

void w25x20cl_block64_erase(uint32_t addr)
{
	return w25x20cl_erase(_CMD_BLOCK64_ERASE, addr);
}

void w25x20cl_chip_erase(void)
{
	_CS_LOW();
	_SPI_TX(_CMD_CHIP_ERASE);            // send command 0xc7
	_CS_HIGH();
}


void w25x20cl_rd_uid(uint8_t* uid)
{
	_CS_LOW();
	_SPI_TX(_CMD_RD_UID);                // send command 0x4b
	uint8_t cnt = 4;                     // 4 dummy bytes
	while (cnt--)                        // receive dummy bytes
		_SPI_RX();
	cnt = 8;                             // 8 bytes UID
	while (cnt--)                        // receive UID
		uid[7 - cnt] = _SPI_RX();
	_CS_HIGH();
}

int w25x20cl_mfrid_devid(void)
{
	_CS_LOW();
	_SPI_TX(_CMD_MFRID_DEVID);           // send command 0x90
	uint8_t cnt = 3;                     // 3 address bytes
	while (cnt--)                        // send address bytes
		_SPI_TX(0x00);
	uint8_t w25x20cl_mfrid = _SPI_RX();  // receive mfrid
	uint8_t w25x20cl_devid = _SPI_RX();  // receive devid
	_CS_HIGH();
	return ((w25x20cl_mfrid == _MFRID) && (w25x20cl_devid == _DEVID));
}