1_75mm_MK3-EINSy10a-E3Dv6full.h 28 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712
  1. #ifndef CONFIGURATION_PRUSA_H
  2. #define CONFIGURATION_PRUSA_H
  3. #include <limits.h>
  4. #include "printers.h"
  5. /*------------------------------------
  6. GENERAL SETTINGS
  7. *------------------------------------*/
  8. // Printer revision
  9. #define PRINTER_TYPE PRINTER_MK3
  10. #define PRINTER_NAME PRINTER_MK3_NAME
  11. #define PRINTER_MMU_TYPE PRINTER_MK3_MMU2
  12. #define PRINTER_MMU_NAME PRINTER_MK3_MMU2_NAME
  13. #define FILAMENT_SIZE "1_75mm_MK3"
  14. #define NOZZLE_TYPE "E3Dv6full"
  15. // Developer flag
  16. #define DEVELOPER
  17. // Printer name
  18. #define CUSTOM_MENDEL_NAME "Prusa i3 MK3"
  19. // Electronics
  20. #define MOTHERBOARD BOARD_EINSY_1_0a
  21. #define STEEL_SHEET
  22. #define HAS_SECOND_SERIAL_PORT
  23. // Uncomment the below for the E3D PT100 temperature sensor (with or without PT100 Amplifier)
  24. //#define E3D_PT100_EXTRUDER_WITH_AMP
  25. //#define E3D_PT100_EXTRUDER_NO_AMP
  26. //#define E3D_PT100_BED_WITH_AMP
  27. //#define E3D_PT100_BED_NO_AMP
  28. /*------------------------------------
  29. AXIS SETTINGS
  30. *------------------------------------*/
  31. // Steps per unit {X,Y,Z,E}
  32. //#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/8,140}
  33. #define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/8,280}
  34. //#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/8,560}
  35. // Endstop inverting
  36. #define X_MIN_ENDSTOP_INVERTING 0 // set to 1 to invert the logic of the endstop.
  37. #define Y_MIN_ENDSTOP_INVERTING 0 // set to 1 to invert the logic of the endstop.
  38. #define Z_MIN_ENDSTOP_INVERTING 0 // set to 1 to invert the logic of the endstop.
  39. // Direction inverting
  40. #define INVERT_X_DIR 1 // for Mendel set to 0, for Orca set to 1
  41. #define INVERT_Y_DIR 0 // for Mendel set to 1, for Orca set to 0
  42. #define INVERT_Z_DIR 1 // for Mendel set to 0, for Orca set to 1
  43. #define INVERT_E0_DIR 0 // for direct drive extruder v9 set to 1, for geared extruder set to 0
  44. #define INVERT_E1_DIR 0 // for direct drive extruder v9 set to 1, for geared extruder set to 0
  45. #define INVERT_E2_DIR 0 // for direct drive extruder v9 set to 1, for geared extruder set to 0
  46. // Home position
  47. #define MANUAL_X_HOME_POS 0
  48. #define MANUAL_Y_HOME_POS -2.2
  49. #define MANUAL_Z_HOME_POS 0.2
  50. // Travel limits after homing
  51. #define X_MAX_POS 255
  52. #define X_MIN_POS 0
  53. #define Y_MAX_POS 212.5
  54. #define Y_MIN_POS -4 //orig -4
  55. #define Z_MAX_POS 210
  56. #define Z_MIN_POS 0.15
  57. // Canceled home position
  58. #define X_CANCEL_POS 50
  59. #define Y_CANCEL_POS 190
  60. #define Z_CANCEL_LIFT 50
  61. //Pause print position
  62. #define X_PAUSE_POS 50
  63. #define Y_PAUSE_POS 190
  64. #define Z_PAUSE_LIFT 20
  65. #define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
  66. #define HOMING_FEEDRATE {3000, 3000, 800, 0} // set the homing speeds (mm/min) // 3000 is also valid for stallGuard homing. Valid range: 2200 - 3000
  67. //#define DEFAULT_Y_OFFSET 4.f // Default distance of Y_MIN_POS point from endstop, when the printer is not calibrated.
  68. /**
  69. * [0,0] steel sheet print area point X coordinate in bed print area coordinates
  70. */
  71. #define SHEET_PRINT_ZERO_REF_X 0.f
  72. /**
  73. * [0,0] steel sheet print area point Y coordinate in bed print area coordinates
  74. */
  75. #define SHEET_PRINT_ZERO_REF_Y -2.f
  76. #define DEFAULT_MAX_FEEDRATE {200, 200, 12, 120} // (mm/sec) max feedrate (M203)
  77. #define DEFAULT_MAX_FEEDRATE_SILENT {100, 100, 12, 120} // (mm/sec) max feedrate (M203), silent mode
  78. #define DEFAULT_MAX_ACCELERATION {1000, 1000, 200, 5000} // (mm/sec^2) max acceleration (M201)
  79. #define DEFAULT_MAX_ACCELERATION_SILENT {960, 960, 200, 5000} // (mm/sec^2) max acceleration (M201), silent mode
  80. #define DEFAULT_ACCELERATION 1250 // X, Y, Z and E max acceleration in mm/s^2 for printing moves (M204P)
  81. #define DEFAULT_RETRACT_ACCELERATION 1250 // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204R)
  82. #define DEFAULT_TRAVEL_ACCELERATION 1250 // X, Y, Z and E max acceleration in mm/s^2 for travels (M204T)
  83. #define MANUAL_FEEDRATE {2700, 2700, 1000, 100} // set the speeds for manual moves (mm/min)
  84. //Silent mode limits
  85. #define SILENT_MAX_ACCEL_XY 960ul // max acceleration in silent mode in mm/s^2
  86. #define SILENT_MAX_FEEDRATE_XY 100 // max feedrate in mm/s
  87. //Normal mode limits
  88. #define NORMAL_MAX_ACCEL_XY 2500ul // max acceleration in normal mode in mm/s^2
  89. #define NORMAL_MAX_FEEDRATE_XY 200 // max feedrate in mm/s
  90. //number of bytes from end of the file to start check
  91. #define END_FILE_SECTION 20000
  92. #define Z_AXIS_ALWAYS_ON 1
  93. //Crash detection
  94. #define CRASHDET_TIMER 45 //seconds
  95. #define CRASHDET_COUNTER_MAX 3
  96. // New XYZ calibration
  97. #define NEW_XYZCAL
  98. // Watchdog support
  99. #define WATCHDOG
  100. // Power panic
  101. #define UVLO_SUPPORT
  102. // Fan check
  103. #define FANCHECK
  104. // Safety timer
  105. #define SAFETYTIMER
  106. #define DEFAULT_SAFETYTIMER_TIME_MINS 30
  107. #define FARM_DEFAULT_SAFETYTIMER_TIME_ms (45*60*1000ul)
  108. // Offline crash dumper
  109. #define XFLASH_DUMP // enable dump functionality (including D20/D21/D22)
  110. #define MENU_DUMP // enable "Memory dump" in Settings menu
  111. #define EMERGENCY_DUMP // trigger crash on stack corruption and WDR
  112. // Online crash dumper
  113. //#define EMERGENCY_SERIAL_DUMP // Request dump via serial on stack corruption and WDR
  114. //#define MENU_SERIAL_DUMP // Enable "Memory dump" in Settings menu
  115. // Filament sensor
  116. #define FILAMENT_SENSOR
  117. #define PAT9125
  118. // Backlash -
  119. //#define BACKLASH_X
  120. //#define BACKLASH_Y
  121. // Minimum ambient temperature limit to start triggering MINTEMP errors [C]
  122. // this value is litlebit higher that real limit, because ambient termistor is on the board and is temperated from it,
  123. // temperature inside the case is around 31C for ambient temperature 25C, when the printer is powered on long time and idle
  124. // the real limit is 15C (same as MINTEMP limit), this is because 15C is end of scale for both used thermistors (bed, heater)
  125. #define MINTEMP_MINAMBIENT 10
  126. #define MINTEMP_MINAMBIENT_RAW 1002
  127. #define DEBUG_DCODE2
  128. #define DEBUG_DCODE3
  129. #define DEBUG_DCODE6
  130. //#define DEBUG_PULLUP_CRASH //Test Pullup crash
  131. //#define DEBUG_BUILD
  132. //#define DEBUG_SEC_LANG //secondary language debug output at startup
  133. //#define DEBUG_XFLASH //debug external spi flash
  134. #ifdef DEBUG_BUILD
  135. //#define _NO_ASM
  136. #define DEBUG_DCODES //D codes
  137. #define DEBUG_STACK_MONITOR //Stack monitor in stepper ISR
  138. //#define DEBUG_FSENSOR_LOG //Reports fsensor status to serial
  139. //#define DEBUG_CRASHDET_COUNTERS //Display crash-detection counters on LCD
  140. //#define DEBUG_RESUME_PRINT //Resume/save print debug enable
  141. //#define DEBUG_UVLO_AUTOMATIC_RECOVER // Power panic automatic recovery debug output
  142. //#define DEBUG_DISABLE_XMINLIMIT //x min limit ignored
  143. //#define DEBUG_DISABLE_XMAXLIMIT //x max limit ignored
  144. //#define DEBUG_DISABLE_YMINLIMIT //y min limit ignored
  145. //#define DEBUG_DISABLE_YMAXLIMIT //y max limit ignored
  146. //#define DEBUG_DISABLE_ZMINLIMIT //z min limit ignored
  147. //#define DEBUG_DISABLE_ZMAXLIMIT //z max limit ignored
  148. #define DEBUG_DISABLE_STARTMSGS //no startup messages
  149. //#define DEBUG_DISABLE_MINTEMP //mintemp error ignored
  150. //#define DEBUG_DISABLE_SWLIMITS //sw limits ignored
  151. //#define DEBUG_DISABLE_LCD_STATUS_LINE //empty four lcd line
  152. //#define DEBUG_DISABLE_PREVENT_EXTRUDER //cold extrusion and long extrusion allowed
  153. //#define DEBUG_DISABLE_PRUSA_STATISTICS //disable prusa_statistics() mesages
  154. //#define DEBUG_DISABLE_FORCE_SELFTEST //disable force selftest
  155. //#define DEBUG_XSTEP_DUP_PIN 21 //duplicate x-step output to pin 21 (SCL on P3)
  156. //#define DEBUG_YSTEP_DUP_PIN 21 //duplicate y-step output to pin 21 (SCL on P3)
  157. //#define DEBUG_DISABLE_FANCHECK //disable fan check (no ISR INT7, check disabled)
  158. //#define DEBUG_DISABLE_FSENSORCHECK //disable fsensor check (no ISR INT7, check disabled)
  159. #define DEBUG_DUMP_TO_2ND_SERIAL //dump received characters to 2nd serial line
  160. #define DEBUG_STEPPER_TIMER_MISSED // Stop on stepper timer overflow, beep and display a message.
  161. #define PLANNER_DIAGNOSTICS // Show the planner queue status on printer display.
  162. #define CMD_DIAGNOSTICS //Show cmd queue length on printer display
  163. #endif /* DEBUG_BUILD */
  164. //#define FSENSOR_QUALITY
  165. #define LINEARITY_CORRECTION
  166. #define TMC2130_LINEARITY_CORRECTION
  167. #define TMC2130_LINEARITY_CORRECTION_XYZ
  168. #define TMC2130_VARIABLE_RESOLUTION
  169. /*------------------------------------
  170. TMC2130 default settings
  171. *------------------------------------*/
  172. #define TMC2130_FCLK 12000000 // fclk = 12MHz
  173. #define TMC2130_USTEPS_XY 16 // microstep resolution for XY axes
  174. #define TMC2130_USTEPS_Z 16 // microstep resolution for Z axis
  175. #define TMC2130_USTEPS_E 32 // microstep resolution for E axis
  176. #define TMC2130_INTPOL_XY 1 // extrapolate 256 for XY axes
  177. #define TMC2130_INTPOL_Z 1 // extrapolate 256 for Z axis
  178. #define TMC2130_INTPOL_E 1 // extrapolate 256 for E axis
  179. // #define ALLOW_ALL_MRES
  180. #define TMC2130_PWM_GRAD_X 2 // PWMCONF
  181. #define TMC2130_PWM_AMPL_X 230 // PWMCONF
  182. #define TMC2130_PWM_AUTO_X 1 // PWMCONF
  183. #define TMC2130_PWM_FREQ_X 2 // PWMCONF
  184. #define TMC2130_PWM_GRAD_Y 2 // PWMCONF
  185. #define TMC2130_PWM_AMPL_Y 235 // PWMCONF
  186. #define TMC2130_PWM_AUTO_Y 1 // PWMCONF
  187. #define TMC2130_PWM_FREQ_Y 2 // PWMCONF
  188. #define TMC2130_PWM_GRAD_Z 4 // PWMCONF
  189. #define TMC2130_PWM_AMPL_Z 200 // PWMCONF
  190. #define TMC2130_PWM_AUTO_Z 1 // PWMCONF
  191. #define TMC2130_PWM_FREQ_Z 2 // PWMCONF
  192. #define TMC2130_PWM_GRAD_E 4 // PWMCONF
  193. #define TMC2130_PWM_AMPL_E 240 // PWMCONF
  194. #define TMC2130_PWM_AUTO_E 1 // PWMCONF
  195. #define TMC2130_PWM_FREQ_E 2 // PWMCONF
  196. // experimental setting for E-motor cooler operation
  197. #define TMC2130_PWM_GRAD_Ecool 84 // PWMCONF 730mA @ 375mm/min 970mA phase peak at feedrate 900mm/min
  198. #define TMC2130_PWM_AMPL_Ecool 43 // PWMCONF 500mA phase peak at feedrate 10 mm/min
  199. #define TMC2130_PWM_AUTO_Ecool 0 // PWMCONF
  200. #define TMC2130_TOFF_XYZ 3 // CHOPCONF // fchop = 27.778kHz
  201. #define TMC2130_TOFF_E 3 // CHOPCONF // fchop = 27.778kHz
  202. //#define TMC2130_TOFF_E 4 // CHOPCONF // fchop = 21.429kHz
  203. //#define TMC2130_TOFF_E 5 // CHOPCONF // fchop = 17.442kHz
  204. //#define TMC2130_STEALTH_E // Extruder stealthChop mode
  205. //#define TMC2130_CNSTOFF_E // Extruder constant-off-time mode (similar to MK2)
  206. //#define TMC2130_PWM_DIV 683 // PWM frequency divider (1024, 683, 512, 410)
  207. #define TMC2130_PWM_DIV 512 // PWM frequency divider (1024, 683, 512, 410)
  208. #define TMC2130_PWM_CLK (2 * TMC2130_FCLK / TMC2130_PWM_DIV) // PWM frequency (23.4kHz, 35.1kHz, 46.9kHz, 58.5kHz for 12MHz fclk)
  209. #define TMC2130_TPWMTHRS 0 // TPWMTHRS - Sets the switching speed threshold based on TSTEP from stealthChop to spreadCycle mode
  210. #define TMC2130_TPWMTHRS_E 403 // Switch extruder from StealthChop to SpreadCycle at around 900mm/min
  211. #define TMC2130_THIGH 0 // THIGH - unused
  212. //#define TMC2130_TCOOLTHRS_X 450 // TCOOLTHRS - coolstep treshold
  213. //#define TMC2130_TCOOLTHRS_Y 450 // TCOOLTHRS - coolstep treshold
  214. #define TMC2130_TCOOLTHRS_X 430 // TCOOLTHRS - coolstep treshold
  215. #define TMC2130_TCOOLTHRS_Y 430 // TCOOLTHRS - coolstep treshold
  216. #define TMC2130_TCOOLTHRS_Z 500 // TCOOLTHRS - coolstep treshold
  217. #define TMC2130_TCOOLTHRS_E 500 // TCOOLTHRS - coolstep treshold
  218. #define TMC2130_SG_HOMING 1 // stallguard homing
  219. #define TMC2130_SG_THRS_X 3 // stallguard sensitivity for X axis
  220. #define TMC2130_SG_THRS_Y 3 // stallguard sensitivity for Y axis
  221. #define TMC2130_SG_THRS_Z 4 // stallguard sensitivity for Z axis
  222. #define TMC2130_SG_THRS_E 3 // stallguard sensitivity for E axis
  223. #define TMC2130_SG_THRS_HOME {3, 3, TMC2130_SG_THRS_Z, TMC2130_SG_THRS_E}
  224. //new settings is possible for vsense = 1, running current value > 31 set vsense to zero and shift both currents by 1 bit right (Z axis only)
  225. #define TMC2130_CURRENTS_H {16, 20, 35, 30} // default holding currents for all axes
  226. #define TMC2130_CURRENTS_FARM 36 // E 805 mA peak for ECool/farm mode
  227. #define TMC2130_CURRENTS_R {16, 20, 35, 30} // default running currents for all axes
  228. #define TMC2130_CURRENTS_R_HOME {8, 10, 20, 18} // homing running currents for all axes
  229. #define TMC2130_STEALTH_Z
  230. #define TMC2130_DEDGE_STEPPING
  231. //#define TMC2130_SERVICE_CODES_M910_M918
  232. //#define TMC2130_DEBUG
  233. //#define TMC2130_DEBUG_WR
  234. //#define TMC2130_DEBUG_RD
  235. /*------------------------------------
  236. EXTRUDER SETTINGS
  237. *------------------------------------*/
  238. // Mintemps
  239. #define HEATER_0_MINTEMP 10
  240. #define HEATER_1_MINTEMP 5
  241. #define HEATER_2_MINTEMP 5
  242. #define HEATER_MINTEMP_DELAY 15000 // [ms] ! if changed, check maximal allowed value @ ShortTimer
  243. #if HEATER_MINTEMP_DELAY>USHRT_MAX
  244. #error "Check maximal allowed value @ ShortTimer (see HEATER_MINTEMP_DELAY definition)"
  245. #endif
  246. #define BED_MINTEMP 10
  247. #define BED_MINTEMP_DELAY 50000 // [ms] ! if changed, check maximal allowed value @ ShortTimer
  248. #if BED_MINTEMP_DELAY>USHRT_MAX
  249. #error "Check maximal allowed value @ ShortTimer (see BED_MINTEMP_DELAY definition)"
  250. #endif
  251. #define SUPERPINDA_SUPPORT
  252. #define PINDA_MINTEMP 10
  253. //#define PINDA_TEMP_COMP //Used to enable SuperPINDA toggle menu/function
  254. #define AMBIENT_MINTEMP -30
  255. // Maxtemps
  256. #if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)
  257. #define HEATER_0_MAXTEMP 410
  258. #else
  259. #define HEATER_0_MAXTEMP 305
  260. #endif
  261. #define HEATER_1_MAXTEMP 305
  262. #define HEATER_2_MAXTEMP 305
  263. #define BED_MAXTEMP 125
  264. #define AMBIENT_MAXTEMP 100
  265. #if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)
  266. // Define PID constants for extruder with PT100
  267. #define DEFAULT_Kp 21.70
  268. #define DEFAULT_Ki 1.60
  269. #define DEFAULT_Kd 73.76
  270. #else
  271. // Define PID constants for extruder
  272. //#define DEFAULT_Kp 40.925
  273. //#define DEFAULT_Ki 4.875
  274. //#define DEFAULT_Kd 86.085
  275. #define DEFAULT_Kp 16.13
  276. #define DEFAULT_Ki 1.1625
  277. #define DEFAULT_Kd 56.23
  278. #endif
  279. // Extrude mintemp
  280. #define EXTRUDE_MINTEMP 175
  281. // Extruder cooling fans
  282. #define EXTRUDER_0_AUTO_FAN_PIN 8
  283. #define EXTRUDER_1_AUTO_FAN_PIN -1
  284. #define EXTRUDER_2_AUTO_FAN_PIN -1
  285. #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
  286. #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
  287. #define FANCHECK_AUTO_PRINT_FAN_THRS 70 //[RPS] - Used during selftest to identify swapped fans automatically
  288. #define FANCHECK_AUTO_FAIL_THRS 20 //[RPS] - Used during selftest to identify a faulty fan
  289. /*------------------------------------
  290. LOAD/UNLOAD FILAMENT SETTINGS
  291. *------------------------------------*/
  292. // Load filament commands
  293. #define LOAD_FILAMENT_0 "M83"
  294. #define LOAD_FILAMENT_1 "G1 E70 F400"
  295. #define LOAD_FILAMENT_2 "G1 E40 F100"
  296. // Unload filament commands
  297. #define UNLOAD_FILAMENT_0 "M83"
  298. #define UNLOAD_FILAMENT_1 "G1 E-80 F7000"
  299. /*------------------------------------
  300. CHANGE FILAMENT SETTINGS
  301. *------------------------------------*/
  302. // Filament change configuration
  303. #define FILAMENTCHANGEENABLE
  304. #ifdef FILAMENTCHANGEENABLE
  305. #define FILAMENTCHANGE_XPOS 211
  306. #define FILAMENTCHANGE_YPOS 0
  307. #define FILAMENTCHANGE_ZADD 2
  308. #define FILAMENTCHANGE_FIRSTRETRACT -2
  309. #define FILAMENTCHANGE_FINALRETRACT -80
  310. #define FILAMENTCHANGE_FIRSTFEED 70 //E distance in mm for fast filament loading sequence used used in filament change (M600)
  311. #define FILAMENTCHANGE_FINALFEED 25 //E distance in mm for slow filament loading sequence used used in filament change (M600) and filament load (M701)
  312. #define FILAMENTCHANGE_RECFEED 5
  313. #define FILAMENTCHANGE_XYFEED 50
  314. #define FILAMENTCHANGE_EFEED_FIRST 20 // feedrate in mm/s for fast filament loading sequence used in filament change (M600)
  315. #define FILAMENTCHANGE_EFEED_FINAL 3.3f // feedrate in mm/s for slow filament loading sequence used in filament change (M600) and filament load (M701)
  316. //#define FILAMENTCHANGE_RFEED 400
  317. #define FILAMENTCHANGE_RFEED 7000 / 60
  318. #define FILAMENTCHANGE_EXFEED 2
  319. #define FILAMENTCHANGE_ZFEED 15
  320. #endif
  321. /*------------------------------------
  322. ADDITIONAL FEATURES SETTINGS
  323. *------------------------------------*/
  324. // temperature runaway
  325. #define TEMP_RUNAWAY_BED_HYSTERESIS 5
  326. #define TEMP_RUNAWAY_BED_TIMEOUT 360
  327. #define TEMP_RUNAWAY_EXTRUDER_HYSTERESIS 15
  328. #define TEMP_RUNAWAY_EXTRUDER_TIMEOUT 45
  329. // model-based temperature check
  330. #define TEMP_MODEL 1 // enable model-based temperature checks
  331. #define TEMP_MODEL_DEBUG 1 // extended runtime logging
  332. #define TEMP_MODEL_P 38. // heater power (W)
  333. #define TEMP_MODEL_C 11. // initial guess for heatblock capacitance (J/K)
  334. #define TEMP_MODEL_Cl 5 // C estimation lower limit
  335. #define TEMP_MODEL_Ch 20 // C estimation upper limit
  336. #define TEMP_MODEL_C_thr 0.01 // C estimation iteration threshold
  337. #define TEMP_MODEL_C_itr 30 // C estimation iteration limit
  338. #define TEMP_MODEL_R 25 // initial guess for heatblock resistance (K/W)
  339. #define TEMP_MODEL_Rl 5 // R estimation lower limit
  340. #define TEMP_MODEL_Rh 50 // R estimation upper limit
  341. #define TEMP_MODEL_R_thr 0.01 // R estimation iteration threshold
  342. #define TEMP_MODEL_R_itr 30 // R estimation iteration limit
  343. #define TEMP_MODEL_Ta_corr -7 // Default ambient temperature correction
  344. #define TEMP_MODEL_LAG 2.1 // Temperature transport delay (s)
  345. #define TEMP_MODEL_W 1.2 // Default warning threshold (K/s)
  346. #define TEMP_MODEL_E 1.74 // Default error threshold (K/s)
  347. #define TEMP_MODEL_CAL_Th 230 // Default calibration working temperature (C)
  348. #define TEMP_MODEL_CAL_Tl 50 // Default calibration cooling temperature (C)
  349. /*------------------------------------
  350. MOTOR CURRENT SETTINGS
  351. *------------------------------------*/
  352. // Motor Current settings for Einsy/tmc = 0..63
  353. #define MOTOR_CURRENT_PWM_RANGE 63
  354. /*------------------------------------
  355. BED SETTINGS
  356. *------------------------------------*/
  357. // Define Mesh Bed Leveling system to enable it
  358. #define MESH_BED_LEVELING
  359. #ifdef MESH_BED_LEVELING
  360. #define MBL_Z_STEP 0.01
  361. // Mesh definitions
  362. #define MESH_MIN_X 24
  363. #define MESH_MAX_X 228
  364. #define MESH_MIN_Y 6
  365. #define MESH_MAX_Y 210
  366. // Mesh upsample definition
  367. #define MESH_NUM_X_POINTS 7
  368. #define MESH_NUM_Y_POINTS 7
  369. // Mesh measure definition
  370. #define MESH_MEAS_NUM_X_POINTS 3
  371. #define MESH_MEAS_NUM_Y_POINTS 3
  372. // Maximum bed level correction value
  373. #define BED_ADJUSTMENT_UM_MAX 100
  374. #define MESH_HOME_Z_CALIB 0.2
  375. #define MESH_HOME_Z_SEARCH 5.0f // Z lift for homing, mesh bed leveling etc.
  376. #define X_PROBE_OFFSET_FROM_EXTRUDER 23 // Z probe to nozzle X offset: -left +right
  377. #define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Z probe to nozzle Y offset: -front +behind
  378. #define Z_PROBE_OFFSET_FROM_EXTRUDER -0.4 // Z probe to nozzle Z offset: -below (always!)
  379. #endif
  380. // Bed Temperature Control
  381. // Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
  382. //
  383. // Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
  384. // If your PID_dT above is the default, and correct for your hardware/configuration, that means 7.689Hz,
  385. // which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
  386. // This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
  387. // If your configuration is significantly different than this and you don't understand the issues involved, you probably
  388. // shouldn't use bed PID until someone else verifies your hardware works.
  389. // If this is enabled, find your own PID constants below.
  390. #define PIDTEMPBED
  391. //
  392. //#define BED_LIMIT_SWITCHING
  393. // This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
  394. // all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
  395. // setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
  396. // so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
  397. #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
  398. // Bed temperature compensation settings
  399. #define BED_OFFSET 10
  400. #define BED_OFFSET_START 40
  401. #define BED_OFFSET_CENTER 50
  402. #ifdef PIDTEMPBED
  403. //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
  404. //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
  405. #if defined(E3D_PT100_BED_WITH_AMP) || defined(E3D_PT100_BED_NO_AMP)
  406. // Define PID constants for extruder with PT100
  407. #define DEFAULT_bedKp 21.70
  408. #define DEFAULT_bedKi 1.60
  409. #define DEFAULT_bedKd 73.76
  410. #else
  411. #define DEFAULT_bedKp 126.13
  412. #define DEFAULT_bedKi 4.30
  413. #define DEFAULT_bedKd 924.76
  414. #endif
  415. //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
  416. //from pidautotune
  417. // #define DEFAULT_bedKp 97.1
  418. // #define DEFAULT_bedKi 1.41
  419. // #define DEFAULT_bedKd 1675.16
  420. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
  421. #endif // PIDTEMPBED
  422. //connect message when communication with monitoring broken
  423. //#define FARM_CONNECT_MESSAGE
  424. /*-----------------------------------
  425. PREHEAT SETTINGS
  426. *------------------------------------*/
  427. #define FARM_PREHEAT_HOTEND_TEMP 250
  428. #define FARM_PREHEAT_HPB_TEMP 80
  429. #define PLA_PREHEAT_HOTEND_TEMP 215
  430. #define PLA_PREHEAT_HPB_TEMP 60
  431. #define PVB_PREHEAT_HOTEND_TEMP 215
  432. #define PVB_PREHEAT_HPB_TEMP 75
  433. #define ASA_PREHEAT_HOTEND_TEMP 260
  434. #define ASA_PREHEAT_HPB_TEMP 105
  435. #define PC_PREHEAT_HOTEND_TEMP 275
  436. #define PC_PREHEAT_HPB_TEMP 110
  437. #define ABS_PREHEAT_HOTEND_TEMP 255
  438. #define ABS_PREHEAT_HPB_TEMP 100
  439. #define HIPS_PREHEAT_HOTEND_TEMP 220
  440. #define HIPS_PREHEAT_HPB_TEMP 100
  441. #define PP_PREHEAT_HOTEND_TEMP 254
  442. #define PP_PREHEAT_HPB_TEMP 100
  443. #define PET_PREHEAT_HOTEND_TEMP 230
  444. #define PET_PREHEAT_HPB_TEMP 85
  445. #define FLEX_PREHEAT_HOTEND_TEMP 240
  446. #define FLEX_PREHEAT_HPB_TEMP 50
  447. /*------------------------------------
  448. THERMISTORS SETTINGS
  449. *------------------------------------*/
  450. //
  451. //--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
  452. //
  453. //// Temperature sensor settings:
  454. // -2 is thermocouple with MAX6675 (only for sensor 0)
  455. // -1 is thermocouple with AD595
  456. // 0 is not used
  457. // 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
  458. // 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  459. // 3 is Mendel-parts thermistor (4.7k pullup)
  460. // 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
  461. // 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
  462. // 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  463. // 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  464. // 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
  465. // 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
  466. // 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
  467. // 10 is 100k RS thermistor 198-961 (4.7k pullup)
  468. // 11 is 100k beta 3950 1% thermistor (4.7k pullup)
  469. // 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  470. // 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
  471. // 20 is the PT100 circuit found in the Ultimainboard V2.x
  472. // 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  473. //
  474. // 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
  475. // (but gives greater accuracy and more stable PID)
  476. // 51 is 100k thermistor - EPCOS (1k pullup)
  477. // 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
  478. // 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
  479. //
  480. // 1047 is Pt1000 with 4k7 pullup
  481. // 1010 is Pt1000 with 1k pullup (non standard)
  482. // 147 is Pt100 with 4k7 pullup
  483. // 148 is E3D Pt100 with 4k7 pullup and no PT100 Amplifier on a MiniRambo 1.3a
  484. // 247 is Pt100 with 4k7 pullup and PT100 Amplifier
  485. // 110 is Pt100 with 1k pullup (non standard)
  486. #if defined(E3D_PT100_EXTRUDER_WITH_AMP)
  487. #define TEMP_SENSOR_0 247
  488. #elif defined(E3D_PT100_EXTRUDER_NO_AMP)
  489. #define TEMP_SENSOR_0 148
  490. #else
  491. #define TEMP_SENSOR_0 5
  492. #endif
  493. #define TEMP_SENSOR_1 0
  494. #define TEMP_SENSOR_2 0
  495. #if defined(E3D_PT100_BED_WITH_AMP)
  496. #define TEMP_SENSOR_BED 247
  497. #elif defined(E3D_PT100_BED_NO_AMP)
  498. #define TEMP_SENSOR_BED 148
  499. #else
  500. #define TEMP_SENSOR_BED 1
  501. #endif
  502. #define TEMP_SENSOR_PINDA 1
  503. #define TEMP_SENSOR_AMBIENT 2000
  504. #define STACK_GUARD_TEST_VALUE 0xA2A2
  505. #define STACK_GUARD_MARGIN 32
  506. #define MAX_BED_TEMP_CALIBRATION 50
  507. #define MAX_HOTEND_TEMP_CALIBRATION 50
  508. #define MAX_E_STEPS_PER_UNIT 250
  509. #define MIN_E_STEPS_PER_UNIT 100
  510. #define Z_BABYSTEP_MIN -3999
  511. #define Z_BABYSTEP_MAX 0
  512. #define PINDA_PREHEAT_X 20
  513. #define PINDA_PREHEAT_Y 60
  514. #define PINDA_PREHEAT_Z 0.15
  515. /*
  516. #define PINDA_PREHEAT_X 70
  517. #define PINDA_PREHEAT_Y -3
  518. #define PINDA_PREHEAT_Z 1*/
  519. #define PINDA_HEAT_T 120 //time in s
  520. #define PINDA_MIN_T 50
  521. #define PINDA_STEP_T 10
  522. #define PINDA_MAX_T 100
  523. #define PING_TIME 60 //time in s
  524. #define PING_TIME_LONG 600 //10 min; used when length of commands buffer > 0 to avoid 0 triggering when dealing with long gcodes
  525. #define PING_ALLERT_PERIOD 60 //time in s
  526. #define NC_TIME 10 //time in s for periodic important status messages sending which needs reponse from monitoring
  527. #define NC_BUTTON_LONG_PRESS 15 //time in s
  528. #define LONG_PRESS_TIME 1000 //time in ms for button long press
  529. #define BUTTON_BLANKING_TIME 200 //time in ms for blanking after button release
  530. #define DEFAULT_PID_TEMP 210
  531. #define MIN_PRINT_FAN_SPEED 75
  532. // How much shall the print head be lifted on power panic?
  533. // Ideally the Z axis will reach a zero phase of the stepper driver on power outage. To simplify this,
  534. // UVLO_Z_AXIS_SHIFT shall be an integer multiply of the stepper driver cycle, that is 4x full step.
  535. // For example, the Prusa i3 MK2 with 16 microsteps per full step has Z stepping of 400 microsteps per mm.
  536. // At 400 microsteps per mm, a full step lifts the Z axis by 0.04mm, and a stepper driver cycle is 0.16mm.
  537. // The following example, 12 * (4 * 16 / 400) = 12 * 0.16mm = 1.92mm.
  538. //#define UVLO_Z_AXIS_SHIFT 1.92
  539. #define UVLO_Z_AXIS_SHIFT 0.64
  540. // When powered off during PP recovery, the Z axis position can still be re-adjusted. In this case
  541. // we just need to shift to the nearest fullstep, but we need a move which is at least
  542. // "dropsegments" steps long. All the above rules still need to apply.
  543. #define UVLO_TINY_Z_AXIS_SHIFT 0.16
  544. // If power panic occured, and the current temperature is higher then target temperature before interrupt minus this offset, print will be recovered automatically.
  545. #define AUTOMATIC_UVLO_BED_TEMP_OFFSET 5
  546. #define HEATBED_V2
  547. #define M600_TIMEOUT 600 //seconds
  548. //#define SUPPORT_VERBOSITY
  549. #define MMU_FILAMENT_COUNT 5
  550. #define MMU_REQUIRED_FW_BUILDNR 83
  551. #define MMU_HWRESET
  552. #define MMU_DEBUG //print communication between MMU2 and printer on serial
  553. #define MMU_HAS_CUTTER
  554. #define MMU_IDLER_SENSOR_ATTEMPTS_NR 21 //max. number of attempts to load filament if first load failed; value for max bowden length and case when loading fails right at the beginning
  555. // Default Arc Interpolation Settings (Now configurable via M214)
  556. #define DEFAULT_N_ARC_CORRECTION 25 // Number of interpolated segments between corrections.
  557. /* A value of 1 or less for N_ARC_CORRECTION will trigger the use of Sin and Cos for every arc, which will improve accuracy at the
  558. cost of performance*/
  559. #define DEFAULT_MM_PER_ARC_SEGMENT 1.0f // REQUIRED - The enforced maximum length of an arc segment
  560. #define DEFAULT_MIN_MM_PER_ARC_SEGMENT 0.5f //the enforced minimum length of an interpolated segment
  561. /* MIN_MM_PER_ARC_SEGMENT Must be smaller than MM_PER_ARC_SEGMENT. Only has an effect if MIN_ARC_SEGMENTS > 0
  562. or ARC_SEGMENTS_PER_SEC > 0 . If both MIN_ARC_SEGMENTS and ARC_SEGMENTS_PER_SEC is defined, the minimum
  563. calculated segment length is used. */
  564. #define DEFAULT_MIN_ARC_SEGMENTS 20 // The enforced minimum segments in a full circle of the same radius. Set to 0 to disable
  565. #define DEFAULT_ARC_SEGMENTS_PER_SEC 0 // Use feedrate to choose segment length. Set to 0 to disable
  566. #endif //__CONFIGURATION_PRUSA_H