eeprom.h 46 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589
  1. /**
  2. * @file
  3. * @author 3d-gussner
  4. */
  5. /** \ingroup eeprom_table */
  6. //! _This is a EEPROM table of currently implemented in Prusa firmware (dynamically generated from doxygen)._
  7. #ifndef EEPROM_H
  8. #define EEPROM_H
  9. #include <stdint.h>
  10. #define MAX_SHEETS 8
  11. #define MAX_SHEET_NAME_LENGTH 7
  12. typedef struct
  13. {
  14. char name[MAX_SHEET_NAME_LENGTH]; //!< Can be null terminated, doesn't need to be null terminated
  15. int16_t z_offset; //!< Z_BABYSTEP_MIN .. Z_BABYSTEP_MAX = Z_BABYSTEP_MIN*2/1000 [mm] .. Z_BABYSTEP_MAX*2/1000 [mm]
  16. uint8_t bed_temp; //!< 0 .. 254 [°C]
  17. uint8_t pinda_temp; //!< 0 .. 254 [°C]
  18. } Sheet;
  19. typedef struct
  20. {
  21. Sheet s[MAX_SHEETS];
  22. uint8_t active_sheet;
  23. } Sheets;
  24. // sizeof(Sheets). Do not change it unless EEPROM_Sheets_base is last item in EEPROM.
  25. // Otherwise it would move following items.
  26. #define EEPROM_SHEETS_SIZEOF 89
  27. #ifdef __cplusplus
  28. static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEPROM_SHEETS_SIZEOF.");
  29. #endif
  30. /** @defgroup eeprom_table EEPROM Table
  31. *
  32. ---------------------------------------------------------------------------------
  33. EEPROM 8-bit Empty value = 0xFFh 255
  34. EEPROM 16-bit Empty value = 0xFFFFh 65535
  35. _Italic = unused or default_
  36. __Bold = Status__
  37. In Default/FactoryReset column the
  38. - __L__ Language
  39. - __S__ Statistics
  40. - __P__ Shipping prep
  41. - __M__ Service/Maintenance prep
  42. - __S/P__ Statistics and Shipping prep
  43. will overwrite existing values to 0 or default.
  44. A FactoryReset All Data will overwrite the whole EEPROM with ffh and some values will be initialized automatically,
  45. others need a reset / reboot.
  46. ---------------------------------------------------------------------------------
  47. How can you use the debug codes?
  48. - Serial terminal like Putty.
  49. - Octoprint does support D-codes
  50. - _Pronterface_ does __not__ support D-codes
  51. ### !!! D-codes are case sensitive so please don't use upper case A,C or X in the address you want to read !!!
  52. #### Useful tools/links:
  53. To convert hex to ascii https://www.rapidtables.com/convert/number/hex-to-ascii.html
  54. To convert hex to dec https://www.rapidtables.com/convert/number/hex-to-decimal.html
  55. Version: 1.0.1
  56. ---------------------------------------------------------------------------------
  57. | Address begin | Bit/Type | Name | Valid values | Default/FactoryReset | Description | Gcode/Function| Debug code
  58. | :-- | :-- | :-- | :--: | :--: | :-- | :--: | :--:
  59. | 0x0FFFh 4095 | uchar | EEPROM_SILENT | 00h 0 | ffh 255 | TMC Stealth mode: __off__ / miniRambo Power mode | LCD menu | D3 Ax0fff C1
  60. | ^ | ^ | ^ | 01h 1 | ^ | TMC Stealth mode: __on__ / miniRambo Silent mode | ^ | ^
  61. | ^ | ^ | ^ | 02h 2 | ^ | miniRambo Auto mode | ^ | ^
  62. | 0x0FFEh 4094 | uchar | EEPROM_LANG | 00h 0 | ffh 255 __L__ | English / LANG_ID_PRI | LCD menu | D3 Ax0ffe C1
  63. | ^ | ^ | ^ | 01h 1 | ^ | Other language LANG_ID_SEC | ^ | ^
  64. | 0x0FFCh 4092 | uint16 | EEPROM_BABYSTEP_X | ??? | ff ffh 65535 | Babystep for X axis _unsued_ | ??? | D3 Ax0ffc C2
  65. | 0x0FFAh 4090 | uint16 | EEPROM_BABYSTEP_Y | ??? | ff ffh 65535 | Babystep for Y axis _unsued_ | ^ | D3 Ax0ffa C2
  66. | 0x0FF8h 4088 | uint16 | EEPROM_BABYSTEP_Z | ??? | ff ffh 65535 | Babystep for Z axis _lagacy_ | ^ | D3 Ax0ff8 C2
  67. | ^ | ^ | ^ | ^ | ^ | multiple values stored now in EEPROM_Sheets_base | ^ | ^
  68. | 0x0FF7h 4087 | uint8 | EEPROM_CALIBRATION_STATUS | ffh 255 | ffh 255 | Assembled _default_ | ??? | D3 Ax0ff7 C1
  69. | ^ | ^ | ^ | 01h 1 | ^ | Calibrated | ^ | ^
  70. | ^ | ^ | ^ | e6h 230 | ^ | needs Live Z adjustment | ^ | ^
  71. | ^ | ^ | ^ | f0h 240 | ^ __P__ | needs Z calibration | ^ | ^
  72. | ^ | ^ | ^ | fah 250 | ^ | needs XYZ calibration | ^ | ^
  73. | ^ | ^ | ^ | 00h 0 | ^ | Unknown | ^ | ^
  74. | 0x0FF5h 4085 | uint16 | EEPROM_BABYSTEP_Z0 | ??? | ff ffh 65535 | Babystep for Z ??? | ??? | D3 Ax0ff5 C2
  75. | 0x0FF1h 4081 | uint32 | EEPROM_FILAMENTUSED | ??? | 00 00 00 00h 0 __S/P__| Filament used in meters | ??? | D3 Ax0ff1 C4
  76. | 0x0FEDh 4077 | uint32 | EEPROM_TOTALTIME | ??? | 00 00 00 00h 0 __S/P__| Total print time | ??? | D3 Ax0fed C4
  77. | 0x0FE5h 4069 | float | EEPROM_BED_CALIBRATION_CENTER | ??? | ff ff ff ffh | ??? | ??? | D3 Ax0fe5 C8
  78. | 0x0FDDh 4061 | float | EEPROM_BED_CALIBRATION_VEC_X | ??? | ff ff ff ffh | ??? | ??? | D3 Ax0fdd C8
  79. | 0x0FD5h 4053 | float | EEPROM_BED_CALIBRATION_VEC_Y | ??? | ff ff ff ffh | ??? | ??? | D3 Ax0fd5 C8
  80. | 0x0FC5h 4037 | int16 | EEPROM_BED_CALIBRATION_Z_JITTER | ??? | ff ffh 65535 | ??? | ??? | D3 Ax0fc5 C16
  81. | 0x0FC4h 4036 | bool | EEPROM_FARM_MODE | 00h 0 | ffh 255 __P__ | Prusa farm mode: __off__ | G99 | D3 Ax0fc4 C1
  82. | ^ | ^ | ^ | 01h 1 | ^ | Prusa farm mode: __on__ | G98 | ^
  83. | 0x0FC3h 4035 | free | _EEPROM_FREE_NR1_ | ??? | ffh 255 | _Free EEPROM space_ | _free space_ | D3 Ax0fc3 C1
  84. | 0x0FC1h 4033 | ??? | EEPROM_FARM_NUMBER | 000-999 | ff ffh / 000 __P__ | Prusa farm number _only 0-9 are allowed: 000-999_ | LCD menu | D3 Ax0fc1 C2
  85. | 0x0FC0h 4032 | bool | EEPROM_BED_CORRECTION_VALID | 00h 0 | 00h 0 | Bed correction invalid | ??? | D3 Ax0fc0 C1
  86. | ^ | ^ | ^ | ffh 255 | | Bed correction valid | ??? | ^
  87. | 0x0FBFh 4031 | char | EEPROM_BED_CORRECTION_LEFT | 00h ffh | 00h 0 | Bed manual correction left | LCD menu | D3 Ax0fbf C1
  88. | ^ | ^ | ^ | ^ | ^ | At this moment limited to +-100um | G80 Lxxx | ^
  89. | 0x0FBEh 4030 | char | EEPROM_BED_CORRECTION_RIGHT | 00h ffh | 00h 0 | Bed manual correction right | LCD menu | D3 Ax0fbe C1
  90. | ^ | ^ | ^ | ^ | ^ | At this moment limited to +-100um | G80 Rxxx | ^
  91. | 0x0FBDh 4029 | char | EEPROM_BED_CORRECTION_FRONT | 00h ffh | 00h 0 | Bed manual correction front | LCD menu | D3 Ax0fbd C1
  92. | ^ | ^ | ^ | ^ | ^ | At this moment limited to +-100um | G80 Fxxx | ^
  93. | 0x0FBCh 4028 | char | EEPROM_BED_CORRECTION_BACK | 00h ffh | 00h 0 | Bed manual correction back | LCD menu | D3 Ax0fbc C1
  94. | ^ | ^ | ^ | ^ | ^ | At this moment limited to +-100um | G80 Bxxx | ^
  95. | 0x0FBBh 4027 | bool | EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY | 00h 0 | ffh 255 | Toshiba Air: __off__ | LCD menu | D3 Ax0fbb C1
  96. | ^ | ^ | ^ | 01h 1 | ^ | Toshiba Air: __on__ | ^ | ^
  97. | 0x0FBAh 4026 | uchar | EEPROM_PRINT_FLAG | ??? | ??? | _unsued_ | ??? | D3 Ax0fba C1
  98. | 0x0FB0h 4016 | int16 | EEPROM_PROBE_TEMP_SHIFT | ??? | ??? | ??? | ??? | D3 Ax0fb0 C10
  99. | 0x0FAFh 4015 | bool | EEPROM_TEMP_CAL_ACTIVE | 00h 0 | 00h 0 | PINDA Temp cal.: __inactive__ | LCD menu | D3 Ax0faf C1
  100. | ^ | ^ | ^ | ffh 255 | ^ | PINDA Temp cal.: __active__ | ^ | ^
  101. | 0x0FA7h 4007 | uint32 | EEPROM_BOWDEN_LENGTH | ??? | ff 00 00 00h | Bowden length | ??? | D3 Ax0fae C8
  102. | ^ | ^ | ^ | ^ | 00 00 00 00h | ^ | ^ | ^
  103. | 0x0FA6h 4006 | uint8 | EEPROM_CALIBRATION_STATUS_PINDA | 00h 0 | ffh 255 | PINDA Temp: __not calibrated__ | ??? | D3 Ax0fa6 C1
  104. | ^ | ^ | ^ | 01h 1 | ^ | PINDA Temp: __calibrated__ | ^ | ^
  105. | 0x0FA5h 4005 | uint8 | EEPROM_UVLO | 00h 0 | ffh 255 | Power Panic flag: __inactive__ | ??? | D3 Ax0fa5 C1
  106. | ^ | ^ | ^ | 01h 1 | ^ | Power Panic flag: __active__ | ^ | ^
  107. | ^ | ^ | ^ | 02h 2 | ^ | Power Panic flag: __???__ | ^ | ^
  108. | 0x0F9Dh 3997 | float | EEPROM_UVLO_CURRENT_POSITION | ??? | ffh 255 | Power Panic position | ??? | D3 Ax0f9d C8
  109. | 0x0F95h 3989 | char | EEPROM_FILENAME | ??? | ffh 255 | Power Panic Filename | ??? | D3 Ax0f95 C8
  110. | 0x0F91h 3985 | uint32 | EEPROM_FILE_POSITION | ??? | ff ff ff ffh | Power Panic File Position | ??? | D3 Ax0f91 C4
  111. | 0x0F8Dh 3981 | float | EEPROM_UVLO_CURRENT_POSITION_Z | ??? | ff ff ff ffh | Power Panic Z Position | ^ | D3 Ax0f8d C4
  112. | 0x0F8Ch 3980 | ??? | EEPROM_UVLO_UNUSED_001 | ??? | ffh 255 | Power Panic _unused_ | ^ | D3 Ax0f8c C1
  113. | 0x0F8Bh 3979 | uint8 | EEPROM_UVLO_TARGET_BED | ??? | ffh 255 | Power Panic Bed temperature | ^ | D3 Ax0f8b C1
  114. | 0x0F89h 3977 | uint16 | EEPROM_UVLO_FEEDRATE | ??? | ff ffh 65535 | Power Panic Feedrate | ^ | D3 Ax0f89 C2
  115. | 0x0F88h 3976 | uint8 | EEPROM_UVLO_FAN_SPEED | ??? | ffh 255 | Power Panic Fan speed | ^ | D3 Ax0f88 C1
  116. | 0x0F87h 3975 | uint8 | EEPROM_FAN_CHECK_ENABLED | 00h 0 | ??? | Fan Check __disabled__ | LCD menu | D3 Ax0f87 C1
  117. | ^ | ^ | ^ | 01h 1 | ffh 255 | Fan Check __enabled__ | ^ | ^
  118. | 0x0F75h 3957 | uint16 | EEPROM_UVLO_MESH_BED_LEVELING | ??? | ff ffh 65535 | Power Panic Mesh Bed Leveling | ??? | D3 Ax0f75 C18
  119. | 0x0F73h 3955 | uint16 | EEPROM_UVLO_Z_MICROSTEPS | ??? | ff ffh 65535 | Power Panic Z microsteps | ??? | D3 Ax0f73 C2
  120. | 0x0F72h 3954 | uint8 | EEPROM_UVLO_E_ABS | ??? | ffh 255 | Power Panic ??? position | ??? | D3 Ax0f72 C1
  121. | 0x0F6Eh 3950 | foat | EEPROM_UVLO_CURRENT_POSITION_E | ??? | ff ff ff ffh | Power Panic E position | ??? | D3 Ax0f6e C4
  122. | 0x0F6Dh 3949 | ??? | _EEPROM_FREE_NR2_ | ??? | ffh 255 | _Free EEPROM space_ | _free space_ | D3 Ax0f6d C1
  123. | 0x0F6Ch 3948 | ??? | _EEPROM_FREE_NR3_ | ??? | ffh 255 | _Free EEPROM space_ | _free space_ | D3 Ax0f6c C1
  124. | 0x0F6Bh 3947 | ??? | _EEPROM_FREE_NR4_ | ??? | ffh 255 | _Free EEPROM space_ | _free space_ | D3 Ax0f6b C1
  125. | 0x0F6Ah 3946 | ??? | _EEPROM_FREE_NR5_ | ??? | ffh 255 | _Free EEPROM space_ | _free space_ | D3 Ax0f6a C1
  126. | 0x0F69h 3945 | uint8 | EEPROM_CRASH_DET | ffh 255 | ffh 255 | Crash detection: __enabled__ | LCD menu | D3 Ax0f69 C1
  127. | ^ | ^ | ^ | 00h 0 | ^ | Crash detection: __disabled__ | LCD menu | ^
  128. | 0x0F68h 3944 | uint8 | EEPROM_CRASH_COUNT_Y | 00h-ffh 0-255 | ffh 255 __S/P__ | Crashes detected on y axis | ??? | D3 Ax0f68 C1
  129. | 0x0F67h 3943 | uint8 | EEPROM_FSENSOR | 01h 1 | ffh 255 __P__ | Filament sensor: __enabled__ | LCD menu | D3 Ax0f67 C1
  130. | ^ | ^ | ^ | 00h 0 | ^ | Filament sensor: __disabled__ | LCD menu | ^
  131. | 0x0F65h 3942 | uint8 | EEPROM_CRASH_COUNT_X | 00h-ffh 0-255 | ffh 255 __S/P__ | Crashes detected on x axis | ??? | D3 Ax0f66 C1
  132. | 0x0F65h 3941 | uint8 | EEPROM_FERROR_COUNT | 00h-ffh 0-255 | ffh 255 __S/P__ | Filament sensor error counter | ??? | D3 Ax0f65 C1
  133. | 0x0F64h 3940 | uint8 | EEPROM_POWER_COUNT | 00h-ffh 0-255 | ffh 255 __S/P__ | Power failure counter | ??? | D3 Ax0f64 C1
  134. | 0x0F60h 3936 | float | EEPROM_XYZ_CAL_SKEW | ??? | ff ff ff ffh | XYZ skew value | ??? | D3 Ax0f60 C4
  135. | 0x0F5Fh 3935 | uint8 | EEPROM_WIZARD_ACTIVE | 01h 1 | 01h 1 __P__ | Wizard __active__ | ??? | D3 Ax0f5f C1
  136. | ^ | ^ | ^ | 00h 0 | ^ | Wizard __inactive__ | ^ | ^
  137. | ^ | ^ | ^ | 02h 2 | 02h 2 __M__ | Wizard active - Z cal after shipping/service prep | ^ | ^
  138. | 0x0F5Dh 3933 | uint16 | EEPROM_BELTSTATUS_X | ??? | ff ffh | X Beltstatus | ??? | D3 Ax0f5d C2
  139. | 0x0F5Bh 3931 | uint16 | EEPROM_BELTSTATUS_Y | ??? | ff ffh | Y Beltstatus | ??? | D3 Ax0f5b C2
  140. | 0x0F5Ah 3930 | uint8 | EEPROM_DIR_DEPTH | 00h-ffh 0-255 | ffh 255 | Directory depth | ??? | D3 Ax0f5a C1
  141. | 0x0F0Ah 3850 | uint8 | EEPROM_DIRS | ??? | ffh 255 | Directories ??? | ??? | D3 Ax0f0a C80
  142. | 0x0F09h 3849 | uint8 | EEPROM_SD_SORT | 00h 0 | ffh 255 | SD card sort by: __time__ | LCD menu | D3 Ax0f09 C1
  143. | ^ | ^ | ^ | 01h 1 | ^ | SD card sort by: __alphabet__ | LCD menu | ^
  144. | ^ | ^ | ^ | 02h 1 | ^ | SD card: __not sorted__ | LCD menu | ^
  145. | 0x0F08h 3848 | uint8 | EEPROM_SECOND_SERIAL_ACTIVE | 00h 0 | ffh 255 | RPi Port: __disabled__ | LCD menu | D3 Ax0f08 C1
  146. | ^ | ^ | ^ | 01h 1 | ^ | RPi Port: __enabled__ | LCD menu | ^
  147. | 0x0F07h 3847 | uint8 | EEPROM_FSENS_AUTOLOAD_ENABLED | 01h 1 | ffh 255 __P__ | Filament autoload: __enabled__ | LCD menu | D3 Ax0f07 C1
  148. | ^ | ^ | ^ | 00h 0 | ^ | Filament autoload: __disabled__ | LCD menu | ^
  149. | 0x0F05h 3845 | uint16 | EEPROM_CRASH_COUNT_X_TOT | 0000-fffe | ff ffh __S/P__ | Total crashes on x axis | ??? | D3 Ax0f05 C2
  150. | 0x0F03h 3843 | uint16 | EEPROM_CRASH_COUNT_Y_TOT | 0000-fffe | ff ffh __S/P__ | Total crashes on y axis | ??? | D3 Ax0f03 C2
  151. | 0x0F01h 3841 | uint16 | EEPROM_FERROR_COUNT_TOT | 0000-fffe | ff ffh __S/P__ | Total filament sensor errors | ??? | D3 Ax0f01 C2
  152. | 0x0EFFh 3839 | uint16 | EEPROM_POWER_COUNT_TOT | 0000-fffe | ff ffh __S/P__ | Total power failures | ??? | D3 Ax0eff C2
  153. | 0x0EFEh 3838 | uint8 | EEPROM_TMC2130_HOME_X_ORIGIN | ??? | ffh 255 | ??? | ??? | D3 Ax0efe C1
  154. | 0x0EFDh 3837 | uint8 | EEPROM MC2130_HOME_X_BSTEPS | ??? | ffh 255 | ??? | ??? | D3 Ax0efd C1
  155. | 0x0EFCh 3836 | uint8 | EEPROM_TMC2130_HOME_X_FSTEPS | ??? | ffh 255 | ??? | ??? | D3 Ax0efc C1
  156. | 0x0EFBh 3835 | uint8 | EEPROM_TMC2130_HOME_Y_ORIGIN | ??? | ffh 255 | ??? | ??? | D3 Ax0efb C1
  157. | 0x0EFAh 3834 | uint8 | EEPROM_TMC2130_HOME_Y_BSTEPS | ??? | ffh 255 | ??? | ??? | D3 Ax0efa C1
  158. | 0x0EF9h 3833 | uint8 | EEPROM_TMC2130_HOME_Y_FSTEPS | ??? | ffh 255 | ??? | ??? | D3 Ax0ef9 C1
  159. | 0x0EF8h 3832 | uint8 | EEPROM_TMC2130_HOME_ENABLED | ??? | ffh 255 | ??? | ??? | D3 Ax0ef8 C1
  160. | 0x0EF7h 3831 | uint8 | EEPROM_TMC2130_WAVE_X_FAC | ??? | ffh 255 | ??? | ??? | D3 Ax0ef7 C1
  161. | 0x0EF6h 3830 | uint8 | EEPROM_TMC2130_WAVE_Y_FAC | ??? | ffh 255 | ??? | ??? | D3 Ax0ef6 C1
  162. | 0x0EF5h 3829 | uint8 | EEPROM_TMC2130_WAVE_Z_FAC | ??? | ffh 255 | ??? | ??? | D3 Ax0ef5 C1
  163. | 0x0EF4h 3828 | uint8 | EEPROM_TMC2130_WAVE_E_FAC | ??? | ffh 255 | ??? | ??? | D3 Ax0ef4 C1
  164. | 0x0EF3h 3827 | uint8 | EEPROM_TMC2130_X_MRES | ??? | ffh 255 | ??? | ??? | D3 Ax0ef3 C1
  165. | 0x0EF2h 3826 | uint8 | EEPROM_TMC2130_Y_MRES | ??? | ffh 255 | ??? | ??? | D3 Ax0ef2 C1
  166. | 0x0EF1h 3825 | uint8 | EEPROM_TMC2130_Z_MRES | ??? | ffh 255 | ??? | ??? | D3 Ax0ef1 C1
  167. | 0x0EF0h 3824 | uint8 | EEPROM_TMC2130_E_MRES | ??? | ffh 255 | ??? | ??? | D3 Ax0ef0 C1
  168. | 0x0EEE 3822 | uint16 | EEPROM_PRINTER_TYPE | ??? | ff ffh 65535 | Printer Type | ??? | D3 Ax0eee C2
  169. | ^ | ^ | ^ | 64 00h 100 | ^ | PRINTER_MK1 | ??? | ^
  170. | ^ | ^ | ^ | c8 00h 200 | ^ | PRINTER_MK2 | ??? | ^
  171. | ^ | ^ | ^ | c9 00h 201 | ^ | PRINTER_MK2 with MMU1 | ??? | ^
  172. | ^ | ^ | ^ | ca 00h 202 | ^ | PRINTER_MK2S | ??? | ^
  173. | ^ | ^ | ^ | cb 00h 203 | ^ | PRINTER_MK2S with MMU1 | ??? | ^
  174. | ^ | ^ | ^ | fa 00h 250 | ^ | PRINTER_MK2.5 | ??? | ^
  175. | ^ | ^ | ^ | 1a 4fh 20250 | ^ | PRINTER_MK2.5 with MMU2 | ??? | ^
  176. | ^ | ^ | ^ | fc 00h 252 | ^ | PRINTER_MK2.5S | ??? | ^
  177. | ^ | ^ | ^ | 1c 4fh 20252 | ^ | PRINTER_MK2.5S with MMU2S | ??? | ^
  178. | ^ | ^ | ^ | 2c 01h 300 | ^ | PRINTER_MK3 | ??? | ^
  179. | ^ | ^ | ^ | 4c 4fh 20300 | ^ | PRINTER_MK3 with MMU2 | ??? | ^
  180. | ^ | ^ | ^ | 2e 01h 302 | ^ | PRINTER_MK3S | ??? | ^
  181. | ^ | ^ | ^ | 4e 4fh 20302 | ^ | PRINTER_MK3S with MMU2S | ??? | ^
  182. | 0x0EEC 3820 | uint16 | EEPROM_BOARD_TYPE | ??? | ff ffh 65535 | Board Type | ??? | D3 Ax0eec C2
  183. | ^ | ^ | ^ | c8 00h 200 | ^ | BOARD_RAMBO_MINI_1_0 | ??? | ^
  184. | ^ | ^ | ^ | cb 00h 203 | ^ | BOARD_RAMBO_MINI_1_3 | ??? | ^
  185. | ^ | ^ | ^ | 36 01h 310 | ^ | BOARD_EINSY_1_0a | ??? | ^
  186. | 0x0EE8 3816 | float | EEPROM_EXTRUDER_MULTIPLIER_0 | ??? | ff ff ff ffh | Power panic Extruder 0 multiplier | ??? | D3 Ax0ee8 C4
  187. | 0x0EE4 3812 | float | EEPROM_EXTRUDER_MULTIPLIER_1 | ??? | ff ff ff ffh | Power panic Extruder 1 multiplier | ??? | D3 Ax0ee4 C4
  188. | 0x0EE0 3808 | float | EEPROM_EXTRUDER_MULTIPLIER_2 | ??? | ff ff ff ffh | Power panic Extruder 2 multiplier | ??? | D3 Ax0ee0 C4
  189. | 0x0EDE 3806 | uint16 | EEPROM_EXTRUDEMULTIPLY | ??? | ff ffh 65535 | Power panic Extruder multiplier | ??? | D3 Ax0ede C2
  190. | 0x0EDA 3802 | float | EEPROM_UVLO_TINY_CURRENT_POSITION_Z | ??? | ff ff ff ffh | Power panic Z position | ??? | D3 Ax0eda C4
  191. | 0x0ED8 3800 | uint16 | EEPROM_UVLO_TARGET_HOTEND | ??? | ff ffh 65535 | Power panic target Hotend temperature | ??? | D3 Ax0ed8 C2
  192. | 0x0ED7 3799 | uint8 | EEPROM_SOUND_MODE | 00h 0 | ffh 255 | Sound mode: __loud__ | ??? | D3 Ax0ed7 C1
  193. | ^ | ^ | ^ | 01h 1 | ^ | Sound mode: __once__ | ^ | ^
  194. | ^ | ^ | ^ | 02h 1 | ^ | Sound mode: __silent__ | ^ | ^
  195. | ^ | ^ | ^ | 03h 1 | ^ | Sound mode: __assist__ | ^ | ^
  196. | 0x0ED6 3798 | bool | EEPROM_AUTO_DEPLETE | 01h 1 | ffh 255 | MMU2/s autodeplete: __on__ | ??? | D3 Ax0ed6 C1
  197. | ^ | ^ | ^ | 00h 0 | ^ | MMU2/s autodeplete: __off__ | ^ | ^
  198. | 0x0ED5 3797 | bool | EEPROM_FSENS_OQ_MEASS_ENABLED | ??? | ffh 255 | PAT1925 ??? | ??? | D3 Ax0ed5 C1
  199. | ^ | ^ | ^ | ??? | ^ | PAT1925 ??? | ^ | ^
  200. | 0x0ED3 3795 | uint16 | EEPROM_MMU_FAIL_TOT | ??? | ff ffh 65535 __S/P__ | MMU2/s total failures | ??? | D3 Ax0ed3 C2
  201. | 0x0ED2 3794 | uint8 | EEPROM_MMU_FAIL | ??? | ffh 255 __S/P__ | MMU2/s fails during print | ??? | D3 Ax0ed2 C1
  202. | 0x0ED0 3792 | uint16 | EEPROM_MMU_LOAD_FAIL_TOT | ??? | ff ffh 65535 __S/P__ | MMU2/s total load failures | ??? | D3 Ax0ed0 C2
  203. | 0x0ECF 3791 | uint8 | EEPROM_MMU_LOAD_FAIL | ??? | ffh 255 __S/P__ | MMU2/s load failures during print | ??? | D3 Ax0ecf C1
  204. | 0x0ECE 3790 | uint8 | EEPROM_MMU_CUTTER_ENABLED | 00h 0 | ffh 255 | MMU2/s cutter: __disabled__ | LCD menu | D3 Ax0ece C1
  205. | ^ | ^ | ^ | 01h 1 | ^ | MMU2/s cutter: __enabled__ | ^ | ^
  206. | ^ | ^ | ^ | 02h 2 | ^ | MMU2/s cutter: __always__ | ^ | ^
  207. | 0x0DAE 3502 | uint16 | EEPROM_UVLO_MESH_BED_LEVELING_FULL | ??? | ff ffh 65535 | Power panic Mesh bed leveling points | ??? | D3 Ax0dae C288
  208. | 0x0DAD 3501 | uint8 | EEPROM_MBL_TYPE | ??? | ffh 255 | Mesh bed leveling precision _unused atm_ | ??? | D3 Ax0dad C1
  209. | 0x0DAC 3500 | bool | EEPROM_MBL_MAGNET_ELIMINATION | 01h 1 | ffh 255 | Mesh bed leveling does: __ignores__ magnets | LCD menu | D3 Ax0dac C1
  210. | ^ | ^ | ^ | 00h 0 | ^ | Mesh bed leveling does: __NOT ignores__ magnets | ^ | ^
  211. | 0x0DAB 3499 | uint8 | EEPROM_MBL_POINTS_NR | 03h 3 | ffh 255 | Mesh bed leveling points: __3x3__ | LCD menu | D3 Ax0dab C1
  212. | ^ | ^ | ^ | 07h 7 | ^ | Mesh bed leveling points: __7x7__ | ^ | ^
  213. | 0x0DAA 3498 | uint8 | EEPROM_MBL_PROBE_NR | 03h 3 | ffh 255 | MBL times measurements for each point: __3__ | LCD menu | D3 Ax0daa C1
  214. | ^ | ^ | ^ | 05h 5 | ^ | MBL times measurements for each point: __5__ | ^ | ^
  215. | ^ | ^ | ^ | 01h 1 | ^ | MBL times measurements for each point: __1__ | ^ | ^
  216. | 0x0DA9 3497 | uint8 | EEPROM_MMU_STEALTH | 01h 1 | ffh 255 | MMU2/s Silent mode: __on__ | ??? | D3 Ax0da9 C1
  217. | ^ | ^ | ^ | 00h 0 | ^ | MMU2/s Silent mode: __off__ | ^ | ^
  218. | 0x0DA8 3496 | uint8 | EEPROM_CHECK_MODE | 01h 1 | ffh 255 | Check mode for nozzle is: __warn__ | LCD menu | D3 Ax0da8 C1
  219. | ^ | ^ | ^ | 02h 0 | ^ | Check mode for nozzle is: __strict__ | ^ | ^
  220. | ^ | ^ | ^ | 00h 0 | ^ | Check mode for nozzle is: __none__ | ^ | ^
  221. | 0x0DA7 3495 | uint8 | EEPROM_NOZZLE_DIAMETER | 28h 40 | ffh 255 | Nozzle diameter is: __40 or 0.40mm__ | LCD menu | D3 Ax0da7 C1
  222. | ^ | ^ | ^ | 3ch 60 | ^ | Nozzle diameter is: __60 or 0.60mm__ | ^ | ^
  223. | ^ | ^ | ^ | 3ch 80 | ^ | Nozzle diameter is: __80 or 0.80mm__ | ^ | ^
  224. | ^ | ^ | ^ | 19h 25 | ^ | Nozzle diameter is: __25 or 0.25mm__ | ^ | ^
  225. | 0x0DA5 3493 | uint16 | EEPROM_NOZZLE_DIAMETER_uM | 9001h | ff ffh 65535 | Nozzle diameter is: __400um__ | LCD menu | D3 Ax0da5 C2
  226. | ^ | ^ | ^ | 5802h | ^ | Nozzle diameter is: __600um__ | ^ | ^
  227. | ^ | ^ | ^ | 2003h | ^ | Nozzle diameter is: __800um__ | ^ | ^
  228. | ^ | ^ | ^ | fa00h | ^ | Nozzle diameter is: __250um__ | ^ | ^
  229. | 0x0DA4 3492 | uint8 | EEPROM_CHECK_MODEL | 01h 1 | ffh 255 | Check mode for printer model is: __warn__ | LCD menu | D3 Ax0da4 C1
  230. | ^ | ^ | ^ | 02h 0 | ^ | Check mode for printer model is: __strict__ | ^ | ^
  231. | ^ | ^ | ^ | 00h 0 | ^ | Check mode for printer model is: __none__ | ^ | ^
  232. | 0x0DA3 3491 | uint8 | EEPROM_CHECK_VERSION | 01h 1 | ffh 255 | Check mode for firmware is: __warn__ | LCD menu | D3 Ax0da3 C1
  233. | ^ | ^ | ^ | 02h 0 | ^ | Check mode for firmware is: __strict__ | ^ | ^
  234. | ^ | ^ | ^ | 00h 0 | ^ | Check mode for firmware is: __none__ | ^ | ^
  235. | 0x0DA2 3490 | uint8 | EEPROM_CHECK_GCODE | 01h 1 | ffh 255 | Check mode for gcode is: __warn__ _unused atm_ | LCD menu | D3 Ax0da2 C1
  236. | ^ | ^ | ^ | 02h 0 | ^ | Check mode for gcode is: __strict__ _unused atm_ | ^ | ^
  237. | ^ | ^ | ^ | 00h 0 | ^ | Check mode for gcode is: __none__ _unused atm_ | ^ | ^
  238. | 0x0D49 3401 | uint16 | EEPROM_SHEETS_BASE | ??? | ffh 255 | ??? | LCD menu | D3 Ax0d49 C89
  239. | 0x0D49 3401 | char | _1st Sheet block_ | 536d6f6f746831| ffffffffffffff | 1st sheet - Name: _Smooth1_ | ^ | D3 Ax0d49 C7
  240. | 0x0D50 3408 | uint16 | ^ | 00 00h 0 | ff ffh 65535 | 1st sheet - Z offset | ^ | D3 Ax0d50 C2
  241. | 0x0D52 3410 | uint8 | ^ | 00h 0 | ffh 255 | 1st sheet - bed temp | ^ | D3 Ax0d52 C1
  242. | 0x0D53 3411 | uint8 | ^ | 00h 0 | ffh 255 | 1st sheet - PINDA temp | ^ | D3 Ax0d53 C1
  243. | 0x0D54 3412 | char | _2nd Sheet block_ | 536d6f6f746832| ffffffffffffff | 2nd sheet - Name: _Smooth2_ | ^ | D3 Ax0d54 C7
  244. | 0x0D5B 3419 | uint16 | ^ | 00 00h 0 | ff ffh 65535 | 2nd sheet - Z offset | ^ | D3 Ax0d5b C2
  245. | 0x0D5D 3421 | uint8 | ^ | 00h 0 | ffh 255 | 2nd sheet - bed temp | ^ | D3 Ax0d5d C1
  246. | 0x0D5E 3422 | uint8 | ^ | 00h 0 | ffh 255 | 2nd sheet - PINDA temp | ^ | D3 Ax0d5e C1
  247. | 0x0D5F 3423 | char | _3rd Sheet block_ | 54657874757231| ffffffffffffff | 3rd sheet - Name: _Textur1_ | ^ | D3 Ax0d5f C7
  248. | 0x0D66 3430 | uint16 | ^ | 00 00h 0 | ff ffh 65535 | 3rd sheet - Z offset | ^ | D3 Ax0d66 C2
  249. | 0x0D68 3432 | uint8 | ^ | 00h 0 | ffh 255 | 3rd sheet - bed temp | ^ | D3 Ax0d68 C1
  250. | 0x0D69 3433 | uint8 | ^ | 00h 0 | ffh 255 | 3rd sheet - PINDA temp | ^ | D3 Ax0d69 C1
  251. | 0x0D6A 3434 | char | _4th Sheet block_ | 54657874757232| ffffffffffffff | 4th sheet - Name: _Textur2_ | ^ | D3 Ax0d6a C7
  252. | 0x0D71 3441 | uint16 | ^ | 00 00h 0 | ff ffh 65535 | 4th sheet - Z offset | ^ | D3 Ax0d71 C2
  253. | 0x0D73 3443 | uint8 | ^ | 00h 0 | ffh 255 | 4th sheet - bed temp | ^ | D3 Ax0d73 C1
  254. | 0x0D74 3444 | uint8 | ^ | 00h 0 | ffh 255 | 4th sheet - PINDA temp | ^ | D3 Ax0d74 C1
  255. | 0x0D75 3445 | char | _5th Sheet block_ | 536174696e2031| ffffffffffffff | 5th sheet - Name: _Satin 1_ | ^ | D3 Ax0d75 C7
  256. | 0x0D7C 3452 | uint16 | ^ | 00 00h 0 | ff ffh 65535 | 5th sheet - Z offset | ^ | D3 Ax0d7c C2
  257. | 0x0D7E 3454 | uint8 | ^ | 00h 0 | ffh 255 | 5th sheet - bed temp | ^ | D3 Ax0d7e C1
  258. | 0x0D7F 3455 | uint8 | ^ | 00h 0 | ffh 255 | 5th sheet - PINDA temp | ^ | D3 Ax0d7f C1
  259. | 0x0D80 3456 | char | _6th Sheet block_ | 536174696e2032| ffffffffffffff | 6th sheet - Name: _Satin 2_ | ^ | D3 Ax0d80 C7
  260. | 0x0D87 3463 | uint16 | ^ | 00 00h 0 | ff ffh 65535 | 6th sheet - Z offset | ^ | D3 Ax0d87 C2
  261. | 0x0D89 3465 | uint8 | ^ | 00h 0 | ffh 255 | 6th sheet - bed temp | ^ | D3 Ax0d89 C1
  262. | 0x0D8A 3466 | uint8 | ^ | 00h 0 | ffh 255 | 6th sheet - PINDA temp | ^ | D3 Ax0d8a C1
  263. | 0x0D8B 3467 | char | _7th Sheet block_ | 437573746f6d31| ffffffffffffff | 7th sheet - Name: _Custom1_ | ^ | D3 Ax0d8b C7
  264. | 0x0D92 3474 | uint16 | ^ | 00 00h 0 | ff ffh 65535 | 7th sheet - Z offset | ^ | D3 Ax0d92 C2
  265. | 0x0D94 3476 | uint8 | ^ | 00h 0 | ffh 255 | 7th sheet - bed temp | ^ | D3 Ax0d94 C1
  266. | 0x0D95 3477 | uint8 | ^ | 00h 0 | ffh 255 | 7th sheet - PINDA temp | ^ | D3 Ax0d95 C1
  267. | 0x0D96 3478 | char | _8th Sheet block_ | 437573746f6d32| ffffffffffffff | 8th sheet - Name: _Custom2_ | ^ | D3 Ax0d96 C7
  268. | 0x0D9D 3485 | uint16 | ^ | 00 00h 0 | ff ffh 65535 | 8th sheet - Z offset | ^ | D3 Ax0d9d C2
  269. | 0x0D9F 3487 | uint8 | ^ | 00h 0 | ffh 255 | 8th sheet - bed temp | ^ | D3 Ax0d9f C1
  270. | 0x0DA0 3488 | uint8 | ^ | 00h 0 | ffh 255 | 8th sheet - PINDA temp | ^ | D3 Ax0da0 C1
  271. | 0x0DA1 3489 | uint8 | ??? | 00h 0 | ffh 255 | ??? | ??? | D3 Ax0da1 C1
  272. | 0x0D48 3400 | uint8 | EEPROM_FSENSOR_PCB | ffh 255 | ffh 255 | Filament Sensor type IR unknown | LCD Support | D3 Ax0d48 C1
  273. | ^ | ^ | ^ | 00h 0 | ^ | Filament Sensor type IR 0.3 or older | ^ | ^
  274. | ^ | ^ | ^ | 01h 1 | ^ | Filament Sensor type IR 0.4 or newer | ^ | ^
  275. | 0x0D47 3399 | uint8 | EEPROM_FSENSOR_ACTION_NA | 00h 0 | ffh 255 | Filament Sensor action: __Continue__ | LCD menu | D3 Ax0d47 C1
  276. | ^ | ^ | ^ | 01h 1 | ^ | Filament Sensor action: __Pause__ | ^ | ^
  277. | 0x0D37 3383 | float | EEPROM_UVLO_SAVED_TARGET | ??? | ff ff ff ffh | Power panic saved target all-axis | ??? | D3 Ax0d37 C16
  278. | ^ | ^ | ^ | ??? | ^ | Power panic saved target e-axis | ^ | D3 Ax0d43 C4
  279. | ^ | ^ | ^ | ??? | ^ | Power panic saved target z-axis | ^ | D3 Ax0d3f C4
  280. | ^ | ^ | ^ | ??? | ^ | Power panic saved target y-axis | ^ | D3 Ax0d3b C4
  281. | ^ | ^ | ^ | ??? | ^ | Power panic saved target x-axis | ^ | D3 Ax0d37 C4
  282. | 0x0D35 3381 | uint16 | EEPROM_UVLO_FEEDMULTIPLY | ??? | ff ffh 65355 | Power panic saved feed multiplier | ??? | D3 Ax0d35 C2
  283. | 0x0D34 3380 | uint8 | EEPROM_BACKLIGHT_LEVEL_HIGH | 00h - ffh | 82h 130 | LCD backlight bright: __128__ Dim value to 255 | LCD menu | D3 Ax0d34 C1
  284. | 0x0D33 3379 | uint8 | EEPROM_BACKLIGHT_LEVEL_LOW | 00h - ffh | 32h 50 | LCD backlight dim: __50__ 0 to Bright value | LCD menu | D3 Ax0d33 C1
  285. | 0x0D32 3378 | uint8 | EEPROM_BACKLIGHT_MODE | 02h 2 | ffh 255 | LCD backlight mode: __Auto__ | LCD menu | D3 Ax0d32 C1
  286. | ^ | ^ | ^ | 01h 1 | ^ | LCD backlight mode: __Bright__ | ^ | ^
  287. | ^ | ^ | ^ | 00h 0 | ^ | LCD backlight mode: __Dim__ | ^ | ^
  288. | 0x0D30 3376 | uint16 | EEPROM_BACKLIGHT_TIMEOUT | 01 00 - ff ff | 0a 00h 65535 | LCD backlight timeout: __10__ seconds | LCD menu | D3 Ax0d30 C2
  289. | 0x0D2C 3372 | float | EEPROM_UVLO_LA_K | ??? | ff ff ff ffh | Power panic saved Linear Advanced K value | ??? | D3 Ax0d2c C4
  290. | 0x0D2B 3371 | uint8 | EEPROM_ALTFAN_OVERRIDE | ffh 255 | ffh 255 | ALTFAN override unknown state | LCD menu | D3 Ax0d2b C1
  291. | ^ | ^ | ^ | 00h 0 | ^ | ALTFAN override deactivated | ^ | ^
  292. | ^ | ^ | ^ | 01h 1 | ^ | ALTFAN override activated | ^ | ^
  293. | 0x0D2A 3370 | uint8 | EEPROM_EXPERIMENTAL_VISIBILITY | ffh 255 | ffh 255 | Experimental menu visibility unknown state | LCD menu | D3 Ax0d2a C1
  294. | ^ | ^ | ^ | 00h 0 | ^ | Experimental menu visibility hidden | ^ | ^
  295. | ^ | ^ | ^ | 01h 1 | ^ | Experimental menu visibility visible | ^ | ^
  296. | 0x0D29 3369 | uint8 | EEPROM_PINDA_TEMP_COMPENSATION | ffh 255 | ffh 255 | PINDA temp compensation unknown state | LCD menu | D3 Ax0d29 C1
  297. | ^ | ^ | ^ | 00h 0 | ^ | PINDA has no temp compensation PINDA v1/2 | ^ | ^
  298. | ^ | ^ | ^ | 01h 1 | ^ | PINDA has temp compensation aka SuperPINDA | ^ | ^
  299. | 0x0D15 3349 | char[20] | EEPROM_PRUSA_SN | SN[19] == 0 | ffffffffffffffff... | PRUSA Serial number string | PRUSA SN | D3 Ax0d15 C20
  300. | 0x0D11 3345 | float | EEPROM_UVLO_ACCELL | ??? | ff ff ff ffh | Power panic saved normal acceleration | ??? | D3 Ax0d11 C4
  301. | 0x0D0D 3341 | float | EEPROM_UVLO_RETRACT_ACCELL | ??? | ff ff ff ffh | Power panic saved retract acceleration | ??? | D3 Ax0d0d C4
  302. | 0x0D09 3337 | float | EEPROM_UVLO_TRAVEL_ACCELL | ??? | ff ff ff ffh | Power panic saved travel acceleration | ??? | D3 Ax0d09 C4
  303. | 0x0D05 3333 | uint32_t | EEPROM_JOB_ID | ??? | 00 00 00 00h | Job ID used by host software | D3 only | D3 Ax0d05 C4
  304. | 0x0D04 3332 | uint8_t | EEPROM_ECOOL_ENABLE | ffh 255 | ^ | Disable extruder motor scaling for non-farm print | LCD menu | D3 Ax0d04 C1
  305. | ^ | ^ | ^ | 2ah 42 | ^ | Enable extruder motor scaling for non-farm print | ^ | D3 Ax0d04 C1
  306. | Address begin | Bit/Type | Name | Valid values | Default/FactoryReset | Description | Gcode/Function| Debug code
  307. | :--: | :--: | :--: | :--: | :--: | :--: | :--: | :--:
  308. | 0x0012 18 | uint16 | EEPROM_FIRMWARE_VERSION_END | ??? | ff ffh 65535 | ??? | ??? | D3 Ax0012 C2
  309. | 0x0010 16 | uint16 | EEPROM_FIRMWARE_VERSION_FLAVOR | ??? | ff ffh 65535 | ??? | ??? | D3 Ax0010 C2
  310. | 0x000E 14 | uint16 | EEPROM_FIRMWARE_VERSION_REVISION | ??? | ff ffh 65535 | Firmware version revision number DEV/ALPHA/BETA/RC| ??? | D3 Ax000e C2
  311. | 0x000C 12 | uint16 | EEPROM_FIRMWARE_VERSION_MINOR | ??? | ff ffh 65535 | Firmware version minor number | ??? | D3 Ax000c C2
  312. | 0x000A 10 | uint16 | EEPROM_FIRMWARE_VERSION_MAJOR | ??? | ff ffh 65535 | Firmware version major number | ??? | D3 Ax000a C2
  313. | 0x0000 0 | char | FW_PRUSA3D_MAGIC | ??? | ffffffffffffffffffff | __`PRUSA3DFW`__ | ??? | D3 Ax0000 C10
  314. */
  315. #define EEPROM_EMPTY_VALUE 0xFF
  316. #define EEPROM_EMPTY_VALUE16 0xFFFF
  317. #define EEPROM_EMPTY_VALUE32 0xFFFFFFFFl
  318. // The total size of the EEPROM is
  319. // 4096 for the Atmega2560
  320. #define EEPROM_TOP 4096
  321. #define EEPROM_SILENT 4095
  322. #define EEPROM_LANG 4094
  323. #define EEPROM_BABYSTEP_X 4092 //unused
  324. #define EEPROM_BABYSTEP_Y 4090 //unused
  325. #define EEPROM_BABYSTEP_Z 4088 //legacy, multiple values stored now in EEPROM_Sheets_base
  326. #define EEPROM_CALIBRATION_STATUS 4087
  327. #define EEPROM_BABYSTEP_Z0 4085
  328. #define EEPROM_FILAMENTUSED 4081
  329. // uint32_t
  330. #define EEPROM_TOTALTIME 4077
  331. #define EEPROM_BED_CALIBRATION_CENTER (EEPROM_TOTALTIME-2*4)
  332. #define EEPROM_BED_CALIBRATION_VEC_X (EEPROM_BED_CALIBRATION_CENTER-2*4)
  333. #define EEPROM_BED_CALIBRATION_VEC_Y (EEPROM_BED_CALIBRATION_VEC_X-2*4)
  334. // Offsets of the Z heiths of the calibration points from the first point.
  335. // The offsets are saved as 16bit signed int, scaled to tenths of microns.
  336. #define EEPROM_BED_CALIBRATION_Z_JITTER (EEPROM_BED_CALIBRATION_VEC_Y-2*8)
  337. #define EEPROM_FARM_MODE (EEPROM_BED_CALIBRATION_Z_JITTER-1)
  338. #define EEPROM_FREE_NR1 (EEPROM_FARM_MODE-1)
  339. #define EEPROM_FARM_NUMBER (EEPROM_FREE_NR1-2)
  340. // Correction of the bed leveling, in micrometers.
  341. // Maximum 50 micrometers allowed.
  342. // Bed correction is valid if set to 1. If set to zero or 255, the successive 4 bytes are invalid.
  343. #define EEPROM_BED_CORRECTION_VALID (EEPROM_FARM_NUMBER-1)
  344. #define EEPROM_BED_CORRECTION_LEFT (EEPROM_BED_CORRECTION_VALID-1)
  345. #define EEPROM_BED_CORRECTION_RIGHT (EEPROM_BED_CORRECTION_LEFT-1)
  346. #define EEPROM_BED_CORRECTION_FRONT (EEPROM_BED_CORRECTION_RIGHT-1)
  347. #define EEPROM_BED_CORRECTION_REAR (EEPROM_BED_CORRECTION_FRONT-1)
  348. #define EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY (EEPROM_BED_CORRECTION_REAR-1)
  349. #define EEPROM_PRINT_FLAG (EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY-1)
  350. #define EEPROM_PROBE_TEMP_SHIFT (EEPROM_PRINT_FLAG - 2*5) //5 x int for storing pinda probe temp shift relative to 50 C; unit: motor steps
  351. #define EEPROM_TEMP_CAL_ACTIVE (EEPROM_PROBE_TEMP_SHIFT - 1)
  352. #define EEPROM_BOWDEN_LENGTH (EEPROM_TEMP_CAL_ACTIVE - 2*4) //4 x int for bowden lengths for multimaterial
  353. #define EEPROM_CALIBRATION_STATUS_PINDA (EEPROM_BOWDEN_LENGTH - 1) //0 - not calibrated; 1 - calibrated
  354. #define EEPROM_UVLO (EEPROM_CALIBRATION_STATUS_PINDA - 1) //1 - uvlo during print
  355. #define EEPROM_UVLO_CURRENT_POSITION (EEPROM_UVLO-2*4) // 2 x float for current_position in X and Y axes
  356. #define EEPROM_FILENAME (EEPROM_UVLO_CURRENT_POSITION - 8) //8chars to store filename without extension
  357. #define EEPROM_FILE_POSITION (EEPROM_FILENAME - 4) //32 bit for uint32_t file position
  358. #define EEPROM_UVLO_CURRENT_POSITION_Z (EEPROM_FILE_POSITION - 4) //float for current position in Z
  359. #define EEPROM_UVLO_UNUSED_001 (EEPROM_UVLO_CURRENT_POSITION_Z - 1) // uint8_t (unused)
  360. #define EEPROM_UVLO_TARGET_BED (EEPROM_UVLO_UNUSED_001 - 1)
  361. #define EEPROM_UVLO_FEEDRATE (EEPROM_UVLO_TARGET_BED - 2) //uint16_t
  362. #define EEPROM_UVLO_FAN_SPEED (EEPROM_UVLO_FEEDRATE - 1)
  363. #define EEPROM_FAN_CHECK_ENABLED (EEPROM_UVLO_FAN_SPEED - 1)
  364. #define EEPROM_UVLO_MESH_BED_LEVELING (EEPROM_FAN_CHECK_ENABLED - 9*2)
  365. #define EEPROM_UVLO_Z_MICROSTEPS (EEPROM_UVLO_MESH_BED_LEVELING - 2) // uint16_t (could be removed)
  366. #define EEPROM_UVLO_E_ABS (EEPROM_UVLO_Z_MICROSTEPS - 1)
  367. #define EEPROM_UVLO_CURRENT_POSITION_E (EEPROM_UVLO_E_ABS - 4) //float for current position in E
  368. #define EEPROM_FREE_NR2 (EEPROM_UVLO_CURRENT_POSITION_E - 1) // FREE EEPROM SPACE
  369. #define EEPROM_FREE_NR3 (EEPROM_FREE_NR2 - 1) // FREE EEPROM SPACE
  370. #define EEPROM_FREE_NR4 (EEPROM_FREE_NR3 - 1) // FREE EEPROM SPACE
  371. #define EEPROM_FREE_NR5 (EEPROM_FREE_NR4 - 1) // FREE EEPROM SPACE
  372. // Crash detection mode EEPROM setting
  373. #define EEPROM_CRASH_DET (EEPROM_FREE_NR5 - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-12)
  374. // Crash detection counter Y (last print)
  375. #define EEPROM_CRASH_COUNT_Y (EEPROM_CRASH_DET - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-15)
  376. // Filament sensor on/off EEPROM setting
  377. #define EEPROM_FSENSOR (EEPROM_CRASH_COUNT_Y - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-14)
  378. // Crash detection counter X (last print)
  379. #define EEPROM_CRASH_COUNT_X (EEPROM_FSENSOR - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-15)
  380. // Filament runout/error coutner (last print)
  381. #define EEPROM_FERROR_COUNT (EEPROM_CRASH_COUNT_X - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-16)
  382. // Power loss errors (last print)
  383. #define EEPROM_POWER_COUNT (EEPROM_FERROR_COUNT - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-17)
  384. #define EEPROM_XYZ_CAL_SKEW (EEPROM_POWER_COUNT - 4) // float for skew backup
  385. #define EEPROM_WIZARD_ACTIVE (EEPROM_XYZ_CAL_SKEW - 1) // 0: wizard not active, 1: wizard active, 2: wizard active without yes/no = forced calibrate Z after shipping/service prep.
  386. #define EEPROM_BELTSTATUS_X (EEPROM_WIZARD_ACTIVE - 2) // uint16
  387. #define EEPROM_BELTSTATUS_Y (EEPROM_BELTSTATUS_X - 2) // uint16
  388. #define EEPROM_DIR_DEPTH (EEPROM_BELTSTATUS_Y-1)
  389. #define EEPROM_DIRS (EEPROM_DIR_DEPTH-80) //8 chars for each dir name, max 10 levels
  390. #define EEPROM_SD_SORT (EEPROM_DIRS - 1) //0 -time, 1-alpha, 2-none
  391. #define EEPROM_SECOND_SERIAL_ACTIVE (EEPROM_SD_SORT - 1)
  392. #define EEPROM_FSENS_AUTOLOAD_ENABLED (EEPROM_SECOND_SERIAL_ACTIVE - 1)
  393. // Crash detection counter X (total)
  394. #define EEPROM_CRASH_COUNT_X_TOT (EEPROM_FSENS_AUTOLOAD_ENABLED - 2) // uint16
  395. // Crash detection counter Y (total)
  396. #define EEPROM_CRASH_COUNT_Y_TOT (EEPROM_CRASH_COUNT_X_TOT - 2) // uint16
  397. // Filament runout/error coutner (total)
  398. #define EEPROM_FERROR_COUNT_TOT (EEPROM_CRASH_COUNT_Y_TOT - 2) // uint16
  399. // Power loss errors (total)
  400. #define EEPROM_POWER_COUNT_TOT (EEPROM_FERROR_COUNT_TOT - 2) // uint16
  401. ////////////////////////////////////////
  402. // TMC2130 Accurate sensorless homing
  403. // X-axis home origin (stepper phase in microsteps, 0..63 for 16ustep resolution)
  404. #define EEPROM_TMC2130_HOME_X_ORIGIN (EEPROM_POWER_COUNT_TOT - 1) // uint8
  405. // X-axis home bsteps (number of microsteps backward)
  406. #define EEPROM_TMC2130_HOME_X_BSTEPS (EEPROM_TMC2130_HOME_X_ORIGIN - 1) // uint8
  407. // X-axis home fsteps (number of microsteps forward)
  408. #define EEPROM_TMC2130_HOME_X_FSTEPS (EEPROM_TMC2130_HOME_X_BSTEPS - 1) // uint8
  409. // Y-axis home origin (stepper phase in microsteps, 0..63 for 16ustep resolution)
  410. #define EEPROM_TMC2130_HOME_Y_ORIGIN (EEPROM_TMC2130_HOME_X_FSTEPS - 1) // uint8
  411. // X-axis home bsteps (number of microsteps backward)
  412. #define EEPROM_TMC2130_HOME_Y_BSTEPS (EEPROM_TMC2130_HOME_Y_ORIGIN - 1) // uint8
  413. // X-axis home fsteps (number of microsteps forward)
  414. #define EEPROM_TMC2130_HOME_Y_FSTEPS (EEPROM_TMC2130_HOME_Y_BSTEPS - 1) // uint8
  415. // Accurate homing enabled
  416. #define EEPROM_TMC2130_HOME_ENABLED (EEPROM_TMC2130_HOME_Y_FSTEPS - 1) // uint8
  417. ////////////////////////////////////////
  418. // TMC2130 uStep linearity correction
  419. // Linearity correction factor (XYZE)
  420. #define EEPROM_TMC2130_WAVE_X_FAC (EEPROM_TMC2130_HOME_ENABLED - 1) // uint8
  421. #define EEPROM_TMC2130_WAVE_Y_FAC (EEPROM_TMC2130_WAVE_X_FAC - 1) // uint8
  422. #define EEPROM_TMC2130_WAVE_Z_FAC (EEPROM_TMC2130_WAVE_Y_FAC - 1) // uint8
  423. #define EEPROM_TMC2130_WAVE_E_FAC (EEPROM_TMC2130_WAVE_Z_FAC - 1) // uint8
  424. ////////////////////////////////////////
  425. // TMC2130 uStep resolution
  426. // microstep resolution (XYZE): usteps = (256 >> mres)
  427. #define EEPROM_TMC2130_X_MRES (EEPROM_TMC2130_WAVE_E_FAC - 1) // uint8
  428. #define EEPROM_TMC2130_Y_MRES (EEPROM_TMC2130_X_MRES - 1) // uint8
  429. #define EEPROM_TMC2130_Z_MRES (EEPROM_TMC2130_Y_MRES - 1) // uint8
  430. #define EEPROM_TMC2130_E_MRES (EEPROM_TMC2130_Z_MRES - 1) // uint8
  431. // HW
  432. #define EEPROM_PRINTER_TYPE (EEPROM_TMC2130_E_MRES - 2) // uint16
  433. #define EEPROM_BOARD_TYPE (EEPROM_PRINTER_TYPE - 2) // uint16
  434. // Extruder multiplier for power panic
  435. #define EEPROM_EXTRUDER_MULTIPLIER_0 (EEPROM_BOARD_TYPE - 4) //float
  436. #define EEPROM_EXTRUDER_MULTIPLIER_1 (EEPROM_EXTRUDER_MULTIPLIER_0 - 4) //float
  437. #define EEPROM_EXTRUDER_MULTIPLIER_2 (EEPROM_EXTRUDER_MULTIPLIER_1 - 4) //float
  438. #define EEPROM_EXTRUDEMULTIPLY (EEPROM_EXTRUDER_MULTIPLIER_2 - 2) // uint16
  439. #define EEPROM_UVLO_TINY_CURRENT_POSITION_Z (EEPROM_EXTRUDEMULTIPLY-4) // float
  440. #define EEPROM_UVLO_TARGET_HOTEND (EEPROM_UVLO_TINY_CURRENT_POSITION_Z-2) // uint16
  441. // Sound Mode
  442. #define EEPROM_SOUND_MODE (EEPROM_UVLO_TARGET_HOTEND-1) // uint8
  443. #define EEPROM_AUTO_DEPLETE (EEPROM_SOUND_MODE-1) //bool
  444. #define EEPROM_FSENS_OQ_MEASS_ENABLED (EEPROM_AUTO_DEPLETE - 1) //bool
  445. #define EEPROM_MMU_FAIL_TOT (EEPROM_FSENS_OQ_MEASS_ENABLED - 2) //uint16_t
  446. #define EEPROM_MMU_FAIL (EEPROM_MMU_FAIL_TOT - 1) //uint8_t
  447. #define EEPROM_MMU_LOAD_FAIL_TOT (EEPROM_MMU_FAIL - 2) //uint16_t
  448. #define EEPROM_MMU_LOAD_FAIL (EEPROM_MMU_LOAD_FAIL_TOT - 1) //uint8_t
  449. #define EEPROM_MMU_CUTTER_ENABLED (EEPROM_MMU_LOAD_FAIL - 1)
  450. #define EEPROM_UVLO_MESH_BED_LEVELING_FULL (EEPROM_MMU_CUTTER_ENABLED - 12*12*2) //allow 12 calibration points for future expansion
  451. #define EEPROM_MBL_TYPE (EEPROM_UVLO_MESH_BED_LEVELING_FULL-1) //uint8_t for mesh bed leveling precision
  452. #define EEPROM_MBL_MAGNET_ELIMINATION (EEPROM_MBL_TYPE -1)
  453. #define EEPROM_MBL_POINTS_NR (EEPROM_MBL_MAGNET_ELIMINATION -1) //uint8_t number of points in one exis for mesh bed leveling
  454. #define EEPROM_MBL_PROBE_NR (EEPROM_MBL_POINTS_NR-1) //number of measurements for each point
  455. #define EEPROM_MMU_STEALTH (EEPROM_MBL_PROBE_NR-1)
  456. #define EEPROM_CHECK_MODE (EEPROM_MMU_STEALTH-1) // uint8
  457. #define EEPROM_NOZZLE_DIAMETER (EEPROM_CHECK_MODE-1) // uint8
  458. #define EEPROM_NOZZLE_DIAMETER_uM (EEPROM_NOZZLE_DIAMETER-2) // uint16
  459. #define EEPROM_CHECK_MODEL (EEPROM_NOZZLE_DIAMETER_uM-1) // uint8
  460. #define EEPROM_CHECK_VERSION (EEPROM_CHECK_MODEL-1) // uint8
  461. #define EEPROM_CHECK_GCODE (EEPROM_CHECK_VERSION-1) // uint8
  462. #define EEPROM_SHEETS_BASE (EEPROM_CHECK_GCODE - EEPROM_SHEETS_SIZEOF) // Sheets
  463. static Sheets * const EEPROM_Sheets_base = (Sheets*)(EEPROM_SHEETS_BASE);
  464. #define EEPROM_FSENSOR_PCB (EEPROM_SHEETS_BASE-1) // uint8
  465. #define EEPROM_FSENSOR_ACTION_NA (EEPROM_FSENSOR_PCB-1) // uint8
  466. #define EEPROM_UVLO_SAVED_TARGET (EEPROM_FSENSOR_ACTION_NA - 4*4) // 4 x float for saved target for all axes
  467. #define EEPROM_UVLO_FEEDMULTIPLY (EEPROM_UVLO_SAVED_TARGET - 2) // uint16_t for feedmultiply
  468. #define EEPROM_BACKLIGHT_LEVEL_HIGH (EEPROM_UVLO_FEEDMULTIPLY-1) // uint8
  469. #define EEPROM_BACKLIGHT_LEVEL_LOW (EEPROM_BACKLIGHT_LEVEL_HIGH-1) // uint8
  470. #define EEPROM_BACKLIGHT_MODE (EEPROM_BACKLIGHT_LEVEL_LOW-1) // uint8
  471. #define EEPROM_BACKLIGHT_TIMEOUT (EEPROM_BACKLIGHT_MODE-2) // uint16
  472. #define EEPROM_UVLO_LA_K (EEPROM_BACKLIGHT_TIMEOUT-4) // float
  473. #define EEPROM_ALTFAN_OVERRIDE (EEPROM_UVLO_LA_K-1) //uint8
  474. #define EEPROM_EXPERIMENTAL_VISIBILITY (EEPROM_ALTFAN_OVERRIDE-1) //uint8
  475. #define EEPROM_PINDA_TEMP_COMPENSATION (EEPROM_EXPERIMENTAL_VISIBILITY-1) //uint8
  476. #define EEPROM_PRUSA_SN (EEPROM_PINDA_TEMP_COMPENSATION-20) //char[20]
  477. #define EEPROM_UVLO_ACCELL (EEPROM_PRUSA_SN-4) // float
  478. #define EEPROM_UVLO_RETRACT_ACCELL (EEPROM_UVLO_ACCELL-4) // float
  479. #define EEPROM_UVLO_TRAVEL_ACCELL (EEPROM_UVLO_RETRACT_ACCELL-4) // float
  480. #define EEPROM_JOB_ID (EEPROM_UVLO_TRAVEL_ACCELL-4) //uint32_t
  481. #define EEPROM_ECOOL_ENABLE (EEPROM_JOB_ID-1) // uint8_t
  482. //This is supposed to point to last item to allow EEPROM overrun check. Please update when adding new items.
  483. #define EEPROM_LAST_ITEM EEPROM_ECOOL_ENABLE
  484. // !!!!!
  485. // !!!!! this is end of EEPROM section ... all updates MUST BE inserted before this mark !!!!!
  486. // !!!!!
  487. // Currently running firmware, each digit stored as uint16_t.
  488. // The flavor differentiates a dev, alpha, beta, release candidate or a release version.
  489. #define EEPROM_FIRMWARE_VERSION_END (FW_PRUSA3D_MAGIC_LEN+8)
  490. #define EEPROM_FIRMWARE_VERSION_FLAVOR (FW_PRUSA3D_MAGIC_LEN+6)
  491. #define EEPROM_FIRMWARE_VERSION_REVISION (FW_PRUSA3D_MAGIC_LEN+4)
  492. #define EEPROM_FIRMWARE_VERSION_MINOR (FW_PRUSA3D_MAGIC_LEN+2)
  493. #define EEPROM_FIRMWARE_VERSION_MAJOR FW_PRUSA3D_MAGIC_LEN
  494. // Magic string, indicating that the current or the previous firmware running was the Prusa3D firmware.
  495. #define EEPROM_FIRMWARE_PRUSA_MAGIC 0
  496. #define EEPROM_ECOOL_MAGIC_NUMBER 42
  497. #ifdef __cplusplus
  498. #include "ConfigurationStore.h"
  499. static_assert(EEPROM_FIRMWARE_VERSION_END < 20, "Firmware version EEPROM address conflicts with EEPROM_M500_base");
  500. static constexpr M500_conf * const EEPROM_M500_base = reinterpret_cast<M500_conf*>(20); //offset for storing settings using M500
  501. static_assert(((sizeof(M500_conf) + 20) < EEPROM_LAST_ITEM), "M500_conf address space conflicts with previous items.");
  502. #endif
  503. enum
  504. {
  505. EEPROM_MMU_CUTTER_ENABLED_enabled = 1,
  506. EEPROM_MMU_CUTTER_ENABLED_always = 2,
  507. };
  508. #ifdef __cplusplus
  509. void eeprom_init();
  510. bool eeprom_is_sheet_initialized(uint8_t sheet_num);
  511. struct SheetName
  512. {
  513. char c[sizeof(Sheet::name) + 1];
  514. };
  515. void eeprom_default_sheet_name(uint8_t index, SheetName &sheetName);
  516. int8_t eeprom_next_initialized_sheet(int8_t sheet);
  517. void eeprom_switch_to_next_sheet();
  518. #endif
  519. #endif // EEPROM_H