123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268 |
- #ifndef ULTRALCD_H
- #define ULTRALCD_H
- #include "Marlin.h"
- #include "lcd.h"
- #include "conv2str.h"
- #include "menu.h"
- #include "mesh_bed_calibration.h"
- #include "config.h"
- #include "config.h"
- extern void menu_lcd_longpress_func(void);
- extern void menu_lcd_charsetup_func(void);
- extern void menu_lcd_lcdupdate_func(void);
- // Call with a false parameter to suppress the LCD update from various places like the planner or the temp control.
- void ultralcd_init();
- void lcd_setstatus(const char* message);
- void lcd_setstatuspgm(const char* message);
- //! return to the main status screen and display the alert message
- //! Beware - it has sideeffects:
- //! - always returns the display to the main status screen
- //! - always makes lcd_reset (which is slow and causes flicker)
- //! - does not update the message if there is already one (i.e. lcd_status_message_level > 0)
- void lcd_setalertstatus(const char* message);
- void lcd_setalertstatuspgm(const char* message);
- //! only update the alert message on the main status screen
- //! has no sideeffects, may be called multiple times
- void lcd_updatestatus(const char *message);
- void lcd_updatestatuspgm(const char *message);
- void lcd_reset_alert_level();
- uint8_t get_message_level();
- void lcd_adjust_z();
- void lcd_pick_babystep();
- void lcd_alright();
- void show_preheat_nozzle_warning();
- void EEPROM_save_B(int pos, int* value);
- void EEPROM_read_B(int pos, int* value);
- void lcd_wait_interact();
- void lcd_loading_filament();
- void lcd_change_success();
- void lcd_loading_color();
- void lcd_sdcard_stop();
- void lcd_pause_print();
- void lcd_pause_usb_print();
- void lcd_resume_print();
- void lcd_print_stop();
- void prusa_statistics(int _message, uint8_t _col_nr = 0);
- unsigned char lcd_choose_color();
- void lcd_load_filament_color_check();
- //void lcd_mylang();
- extern void lcd_belttest();
- extern bool lcd_selftest();
- void lcd_menu_statistics();
- void lcd_status_screen(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
- void lcd_menu_extruder_info(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
- void lcd_menu_show_sensors_state(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
- #ifdef TMC2130
- bool lcd_crash_detect_enabled();
- void lcd_crash_detect_enable();
- void lcd_crash_detect_disable();
- #endif
- extern const char* lcd_display_message_fullscreen_P(const char *msg, uint8_t &nlines);
- extern const char* lcd_display_message_fullscreen_P(const char *msg);
- extern void lcd_return_to_status();
- extern void lcd_wait_for_click();
- extern bool lcd_wait_for_click_delay(uint16_t nDelay);
- extern void lcd_show_fullscreen_message_and_wait_P(const char *msg);
- // 0: no, 1: yes, -1: timeouted
- extern int8_t lcd_show_fullscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting = true, bool default_yes = false);
- extern int8_t lcd_show_multiscreen_message_two_choices_and_wait_P(const char *msg, bool allow_timeouting, bool default_yes,
- const char *first_choice, const char *second_choice);
- extern int8_t lcd_show_multiscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting = true, bool default_yes = false);
- // Ask the user to move the Z axis up to the end stoppers and let
- // the user confirm that it has been done.
- #ifndef TMC2130
- extern bool lcd_calibrate_z_end_stop_manual(bool only_z);
- #endif
- // Show the result of the calibration process on the LCD screen.
- extern void lcd_bed_calibration_show_result(BedSkewOffsetDetectionResultType result, uint8_t point_too_far_mask);
- extern void lcd_diag_show_end_stops();
- #define LCD_MESSAGEPGM(x) lcd_setstatuspgm(PSTR(x))
- #define LCD_ALERTMESSAGEPGM(x) lcd_setalertstatuspgm(PSTR(x))
- #define LCD_MESSAGERPGM(x) lcd_setstatuspgm((x))
- #define LCD_ALERTMESSAGERPGM(x) lcd_setalertstatuspgm((x))
- // To be used in lcd_commands_type.
- enum class LcdCommands : uint_least8_t
- {
- Idle,
- LoadFilament,
- StopPrint,
- FarmModeConfirm,
- LongPause,
- PidExtruder,
- Layer1Cal,
- };
- extern LcdCommands lcd_commands_type;
- extern int8_t FSensorStateMenu;
- enum class CustomMsg : uint_least8_t
- {
- Status, //!< status message from lcd_status_message variable
- MeshBedLeveling, //!< Mesh bed leveling in progress
- FilamentLoading, //!< Loading filament in progress
- PidCal, //!< PID tuning in progress
- TempCal, //!< PINDA temperature calibration
- TempCompPreheat, //!< Temperature compensation preheat
- M0Wait, //!< M0/M1 Wait command working even from SD
- MsgUpdate, //!< Short message even while printing from SD
- Resuming, //!< Resuming message
- };
- extern CustomMsg custom_message_type;
- extern unsigned int custom_message_state;
- extern uint8_t farm_mode;
- extern int farm_timer;
- extern uint8_t farm_status;
- extern bool UserECoolEnabled();
- extern bool FarmOrUserECool();
- #ifdef TMC2130
- #define SILENT_MODE_NORMAL 0
- #define SILENT_MODE_STEALTH 1
- #define SILENT_MODE_OFF SILENT_MODE_NORMAL
- #else
- #define SILENT_MODE_POWER 0
- #define SILENT_MODE_SILENT 1
- #define SILENT_MODE_AUTO 2
- #define SILENT_MODE_OFF SILENT_MODE_POWER
- #endif
- #ifdef IR_SENSOR_ANALOG
- extern bool bMenuFSDetect;
- void printf_IRSensorAnalogBoardChange();
- #endif //IR_SENSOR_ANALOG
- extern int8_t SilentModeMenu;
- extern uint8_t SilentModeMenu_MMU;
- extern bool cancel_heatup;
- extern bool isPrintPaused;
- extern uint8_t scrollstuff;
- void lcd_ignore_click(bool b=true);
- void lcd_commands();
- extern bool bSettings; // flag (i.e. 'fake parameter') for 'lcd_hw_setup_menu()' function
- void lcd_hw_setup_menu(void); // NOT static due to using inside "util" module ("nozzle_diameter_check()")
- void change_extr(int extr);
- #ifdef SNMM
- void extr_unload_all();
- void extr_unload_used();
- #endif //SNMM
- void extr_unload();
- enum class FilamentAction : uint_least8_t
- {
- None, //!< 'none' state is used as flag for (filament) autoLoad (i.e. opposite for 'autoLoad' state)
- Load,
- AutoLoad,
- UnLoad,
- MmuLoad,
- MmuUnLoad,
- MmuEject,
- MmuCut,
- Preheat,
- Lay1Cal,
- };
- extern FilamentAction eFilamentAction;
- extern bool bFilamentFirstRun;
- extern bool bFilamentPreheatState;
- extern bool bFilamentAction;
- void mFilamentItem(uint16_t nTemp,uint16_t nTempBed);
- void mFilamentItemForce();
- void lcd_generic_preheat_menu();
- void unload_filament(bool automatic = false);
- void stack_error();
- void lcd_printer_connected();
- void lcd_ping();
- void lcd_calibrate_extruder();
- void lcd_wait_for_heater();
- void lcd_wait_for_cool_down();
- void lcd_move_e(); // NOT static due to usage in Marlin_main
- void lcd_extr_cal_reset();
- void lcd_temp_cal_show_result(bool result);
- #ifdef PINDA_THERMISTOR
- bool lcd_wait_for_pinda(float temp);
- #endif //PINDA_THERMISTOR
- void bowden_menu();
- char reset_menu();
- uint8_t choose_menu_P(const char *header, const char *item, const char *last_item = nullptr);
- void lcd_pinda_calibration_menu();
- void lcd_calibrate_pinda();
- void lcd_temp_calibration_set();
- void display_loading();
- void lcd_set_degree();
- #if (LANG_MODE != 0)
- void lcd_language();
- #endif
- void lcd_wizard();
- bool lcd_autoDepleteEnabled();
- //! @brief Wizard state
- enum class WizState : uint8_t
- {
- Run, //!< run wizard? Main entry point.
- Restore, //!< restore calibration status
- Selftest, //!< self test
- Xyz, //!< xyz calibration
- Z, //!< z calibration
- IsFil, //!< Is filament loaded? First step of 1st layer calibration
- PreheatPla, //!< waiting for preheat nozzle for PLA
- Preheat, //!< Preheat for any material
- LoadFilCold, //!< Load filament for MMU
- LoadFilHot, //!< Load filament without MMU
- IsPla, //!< Is PLA filament?
- Lay1CalCold, //!< First layer calibration, temperature not selected yet
- Lay1CalHot, //!< First layer calibration, temperature already selected
- RepeatLay1Cal, //!< Repeat first layer calibration?
- Finish, //!< Deactivate wizard
- };
- void lcd_wizard(WizState state);
- extern void lcd_experimental_toggle();
- extern void lcd_experimental_menu();
- #ifdef PINDA_TEMP_COMP
- extern void lcd_pinda_temp_compensation_toggle();
- #endif //PINDA_TEMP_COMP
- #endif //ULTRALCD_H
|