ultralcd_implementation_hitachi_HD44780.h 40 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412
  1. #ifndef ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
  2. #define ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
  3. int scrollstuff = 0;
  4. char longFilenameOLD[LONG_FILENAME_LENGTH];
  5. #include "Configuration_prusa.h"
  6. #include "Marlin.h"
  7. /**
  8. * Implementation of the LCD display routines for a Hitachi HD44780 display. These are common LCD character displays.
  9. * When selecting the Russian language, a slightly different LCD implementation is used to handle UTF8 characters.
  10. **/
  11. #ifndef REPRAPWORLD_KEYPAD
  12. extern volatile uint8_t buttons; //the last checked buttons in a bit array.
  13. #else
  14. extern volatile uint16_t buttons; //an extended version of the last checked buttons in a bit array.
  15. #endif
  16. ////////////////////////////////////
  17. // Setup button and encode mappings for each panel (into 'buttons' variable
  18. //
  19. // This is just to map common functions (across different panels) onto the same
  20. // macro name. The mapping is independent of whether the button is directly connected or
  21. // via a shift/i2c register.
  22. #ifdef ULTIPANEL
  23. // All UltiPanels might have an encoder - so this is always be mapped onto first two bits
  24. #define BLEN_B 1
  25. #define BLEN_A 0
  26. #define EN_B (1<<BLEN_B) // The two encoder pins are connected through BTN_EN1 and BTN_EN2
  27. #define EN_A (1<<BLEN_A)
  28. #if defined(BTN_ENC) && BTN_ENC > -1
  29. // encoder click is directly connected
  30. #define BLEN_C 2
  31. #define EN_C (1<<BLEN_C)
  32. #endif
  33. //
  34. // Setup other button mappings of each panel
  35. //
  36. #if defined(LCD_I2C_VIKI)
  37. #define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
  38. // button and encoder bit positions within 'buttons'
  39. #define B_LE (BUTTON_LEFT<<B_I2C_BTN_OFFSET) // The remaining normalized buttons are all read via I2C
  40. #define B_UP (BUTTON_UP<<B_I2C_BTN_OFFSET)
  41. #define B_MI (BUTTON_SELECT<<B_I2C_BTN_OFFSET)
  42. #define B_DW (BUTTON_DOWN<<B_I2C_BTN_OFFSET)
  43. #define B_RI (BUTTON_RIGHT<<B_I2C_BTN_OFFSET)
  44. #if defined(BTN_ENC) && BTN_ENC > -1
  45. // the pause/stop/restart button is connected to BTN_ENC when used
  46. #define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name
  47. #define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop.
  48. #else
  49. #define LCD_CLICKED (buttons&(B_MI|B_RI))
  50. #endif
  51. // I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
  52. #define LCD_HAS_SLOW_BUTTONS
  53. #elif defined(LCD_I2C_PANELOLU2)
  54. // encoder click can be read through I2C if not directly connected
  55. #if BTN_ENC <= 0
  56. #define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
  57. #define B_MI (PANELOLU2_ENCODER_C<<B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later
  58. #define LCD_CLICKED (buttons&B_MI)
  59. // I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
  60. #define LCD_HAS_SLOW_BUTTONS
  61. #else
  62. #define LCD_CLICKED (buttons&EN_C)
  63. #endif
  64. #elif defined(REPRAPWORLD_KEYPAD)
  65. // define register bit values, don't change it
  66. #define BLEN_REPRAPWORLD_KEYPAD_F3 0
  67. #define BLEN_REPRAPWORLD_KEYPAD_F2 1
  68. #define BLEN_REPRAPWORLD_KEYPAD_F1 2
  69. #define BLEN_REPRAPWORLD_KEYPAD_UP 3
  70. #define BLEN_REPRAPWORLD_KEYPAD_RIGHT 4
  71. #define BLEN_REPRAPWORLD_KEYPAD_MIDDLE 5
  72. #define BLEN_REPRAPWORLD_KEYPAD_DOWN 6
  73. #define BLEN_REPRAPWORLD_KEYPAD_LEFT 7
  74. #define REPRAPWORLD_BTN_OFFSET 3 // bit offset into buttons for shift register values
  75. #define EN_REPRAPWORLD_KEYPAD_F3 (1<<(BLEN_REPRAPWORLD_KEYPAD_F3+REPRAPWORLD_BTN_OFFSET))
  76. #define EN_REPRAPWORLD_KEYPAD_F2 (1<<(BLEN_REPRAPWORLD_KEYPAD_F2+REPRAPWORLD_BTN_OFFSET))
  77. #define EN_REPRAPWORLD_KEYPAD_F1 (1<<(BLEN_REPRAPWORLD_KEYPAD_F1+REPRAPWORLD_BTN_OFFSET))
  78. #define EN_REPRAPWORLD_KEYPAD_UP (1<<(BLEN_REPRAPWORLD_KEYPAD_UP+REPRAPWORLD_BTN_OFFSET))
  79. #define EN_REPRAPWORLD_KEYPAD_RIGHT (1<<(BLEN_REPRAPWORLD_KEYPAD_RIGHT+REPRAPWORLD_BTN_OFFSET))
  80. #define EN_REPRAPWORLD_KEYPAD_MIDDLE (1<<(BLEN_REPRAPWORLD_KEYPAD_MIDDLE+REPRAPWORLD_BTN_OFFSET))
  81. #define EN_REPRAPWORLD_KEYPAD_DOWN (1<<(BLEN_REPRAPWORLD_KEYPAD_DOWN+REPRAPWORLD_BTN_OFFSET))
  82. #define EN_REPRAPWORLD_KEYPAD_LEFT (1<<(BLEN_REPRAPWORLD_KEYPAD_LEFT+REPRAPWORLD_BTN_OFFSET))
  83. #define LCD_CLICKED ((buttons&EN_C) || (buttons&EN_REPRAPWORLD_KEYPAD_F1))
  84. #define REPRAPWORLD_KEYPAD_MOVE_Y_DOWN (buttons&EN_REPRAPWORLD_KEYPAD_DOWN)
  85. #define REPRAPWORLD_KEYPAD_MOVE_Y_UP (buttons&EN_REPRAPWORLD_KEYPAD_UP)
  86. #define REPRAPWORLD_KEYPAD_MOVE_HOME (buttons&EN_REPRAPWORLD_KEYPAD_MIDDLE)
  87. #elif defined(NEWPANEL)
  88. #define LCD_CLICKED (buttons&EN_C)
  89. #else // old style ULTIPANEL
  90. //bits in the shift register that carry the buttons for:
  91. // left up center down right red(stop)
  92. #define BL_LE 7
  93. #define BL_UP 6
  94. #define BL_MI 5
  95. #define BL_DW 4
  96. #define BL_RI 3
  97. #define BL_ST 2
  98. //automatic, do not change
  99. #define B_LE (1<<BL_LE)
  100. #define B_UP (1<<BL_UP)
  101. #define B_MI (1<<BL_MI)
  102. #define B_DW (1<<BL_DW)
  103. #define B_RI (1<<BL_RI)
  104. #define B_ST (1<<BL_ST)
  105. #define LCD_CLICKED (buttons&(B_MI|B_ST))
  106. #endif
  107. ////////////////////////
  108. // Setup Rotary Encoder Bit Values (for two pin encoders to indicate movement)
  109. // These values are independent of which pins are used for EN_A and EN_B indications
  110. // The rotary encoder part is also independent to the chipset used for the LCD
  111. #if defined(EN_A) && defined(EN_B)
  112. #define encrot0 0
  113. #define encrot1 2
  114. #define encrot2 3
  115. #define encrot3 1
  116. #endif
  117. #endif //ULTIPANEL
  118. ////////////////////////////////////
  119. // Create LCD class instance and chipset-specific information
  120. #if defined(LCD_I2C_TYPE_PCF8575)
  121. // note: these are register mapped pins on the PCF8575 controller not Arduino pins
  122. #define LCD_I2C_PIN_BL 3
  123. #define LCD_I2C_PIN_EN 2
  124. #define LCD_I2C_PIN_RW 1
  125. #define LCD_I2C_PIN_RS 0
  126. #define LCD_I2C_PIN_D4 4
  127. #define LCD_I2C_PIN_D5 5
  128. #define LCD_I2C_PIN_D6 6
  129. #define LCD_I2C_PIN_D7 7
  130. #include <Wire.h>
  131. #include <LCD.h>
  132. #include <LiquidCrystal_I2C.h>
  133. #define LCD_CLASS LiquidCrystal_I2C
  134. LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7);
  135. #elif defined(LCD_I2C_TYPE_MCP23017)
  136. //for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators())
  137. #define LED_A 0x04 //100
  138. #define LED_B 0x02 //010
  139. #define LED_C 0x01 //001
  140. #define LCD_HAS_STATUS_INDICATORS
  141. #include <Wire.h>
  142. #include <LiquidTWI2.h>
  143. #define LCD_CLASS LiquidTWI2
  144. #if defined(DETECT_DEVICE)
  145. LCD_CLASS lcd(LCD_I2C_ADDRESS, 1);
  146. #else
  147. LCD_CLASS lcd(LCD_I2C_ADDRESS);
  148. #endif
  149. #elif defined(LCD_I2C_TYPE_MCP23008)
  150. #include <Wire.h>
  151. #include <LiquidTWI2.h>
  152. #define LCD_CLASS LiquidTWI2
  153. #if defined(DETECT_DEVICE)
  154. LCD_CLASS lcd(LCD_I2C_ADDRESS, 1);
  155. #else
  156. LCD_CLASS lcd(LCD_I2C_ADDRESS);
  157. #endif
  158. #elif defined(LCD_I2C_TYPE_PCA8574)
  159. #include <LiquidCrystal_I2C.h>
  160. #define LCD_CLASS LiquidCrystal_I2C
  161. LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_WIDTH, LCD_HEIGHT);
  162. // 2 wire Non-latching LCD SR from:
  163. // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
  164. #elif defined(SR_LCD_2W_NL)
  165. extern "C" void __cxa_pure_virtual() { while (1); }
  166. #include <LCD.h>
  167. #include <LiquidCrystal_SR.h>
  168. #define LCD_CLASS LiquidCrystal_SR
  169. LCD_CLASS lcd(SR_DATA_PIN, SR_CLK_PIN);
  170. #else
  171. // Standard directly connected LCD implementations
  172. #ifdef LANGUAGE_RU
  173. #include "LiquidCrystalRus.h"
  174. #define LCD_CLASS LiquidCrystalRus
  175. #else
  176. #include "LiquidCrystal.h"
  177. #define LCD_CLASS LiquidCrystal
  178. #endif
  179. LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
  180. #endif
  181. #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
  182. static uint16_t progressBarTick = 0;
  183. #if PROGRESS_MSG_EXPIRE > 0
  184. static uint16_t messageTick = 0;
  185. #endif
  186. #define LCD_STR_PROGRESS "\x03\x04\x05"
  187. #endif
  188. /* Custom characters defined in the first 8 characters of the LCD */
  189. #define LCD_STR_BEDTEMP "\x00"
  190. #define LCD_STR_DEGREE "\x01"
  191. #define LCD_STR_THERMOMETER "\x02"
  192. #define LCD_STR_UPLEVEL "\x03"
  193. #define LCD_STR_REFRESH "\x04"
  194. #define LCD_STR_FOLDER "\x05"
  195. #define LCD_STR_FEEDRATE "\x06"
  196. #define LCD_STR_CLOCK "\x07"
  197. #define LCD_STR_ARROW_UP "\x0B"
  198. #define LCD_STR_ARROW_DOWN "\x01"
  199. #define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */
  200. static void lcd_set_custom_characters(
  201. #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
  202. bool progress_bar_set=true
  203. #endif
  204. ) {
  205. byte bedTemp[8] = {
  206. B00000,
  207. B11111,
  208. B10101,
  209. B10001,
  210. B10101,
  211. B11111,
  212. B00000,
  213. B00000
  214. }; //thanks Sonny Mounicou
  215. byte degree[8] = {
  216. B01100,
  217. B10010,
  218. B10010,
  219. B01100,
  220. B00000,
  221. B00000,
  222. B00000,
  223. B00000
  224. };
  225. byte thermometer[8] = {
  226. B00100,
  227. B01010,
  228. B01010,
  229. B01010,
  230. B01010,
  231. B10001,
  232. B10001,
  233. B01110
  234. };
  235. byte uplevel[8] = {
  236. B00100,
  237. B01110,
  238. B11111,
  239. B00100,
  240. B11100,
  241. B00000,
  242. B00000,
  243. B00000
  244. }; //thanks joris
  245. byte refresh[8] = {
  246. B00000,
  247. B00110,
  248. B11001,
  249. B11000,
  250. B00011,
  251. B10011,
  252. B01100,
  253. B00000,
  254. }; //thanks joris
  255. byte folder[8] = {
  256. B00000,
  257. B11100,
  258. B11111,
  259. B10001,
  260. B10001,
  261. B11111,
  262. B00000,
  263. B00000
  264. }; //thanks joris
  265. #ifdef LANGUAGE_EN_H
  266. byte feedrate[8] = {
  267. B11100,
  268. B10000,
  269. B11000,
  270. B10111,
  271. B00101,
  272. B00110,
  273. B00101,
  274. B00000
  275. }; //thanks Sonny Mounicou
  276. #else
  277. /*
  278. byte feedrate[8] = {
  279. B11100,
  280. B10100,
  281. B11000,
  282. B10100,
  283. B00000,
  284. B00111,
  285. B00010,
  286. B00010
  287. };
  288. */
  289. /*
  290. byte feedrate[8] = {
  291. B01100,
  292. B10011,
  293. B00000,
  294. B01100,
  295. B10011,
  296. B00000,
  297. B01100,
  298. B10011
  299. };
  300. */
  301. byte feedrate[8] = {
  302. B00000,
  303. B00100,
  304. B10010,
  305. B01001,
  306. B10010,
  307. B00100,
  308. B00000,
  309. B00000
  310. };
  311. #endif
  312. byte clock[8] = {
  313. B00000,
  314. B01110,
  315. B10011,
  316. B10101,
  317. B10001,
  318. B01110,
  319. B00000,
  320. B00000
  321. }; //thanks Sonny Mounicou
  322. byte arrup[8] = {
  323. B00100,
  324. B01110,
  325. B11111,
  326. B00000,
  327. B00000,
  328. B00000,
  329. B00000,
  330. B00000
  331. };
  332. byte arrdown[8] = {
  333. B00000,
  334. B00000,
  335. B00000,
  336. B00000,
  337. B00000,
  338. B10001,
  339. B01010,
  340. B00100
  341. };
  342. #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
  343. static bool char_mode = false;
  344. byte progress[3][8] = { {
  345. B00000,
  346. B10000,
  347. B10000,
  348. B10000,
  349. B10000,
  350. B10000,
  351. B10000,
  352. B00000
  353. }, {
  354. B00000,
  355. B10100,
  356. B10100,
  357. B10100,
  358. B10100,
  359. B10100,
  360. B10100,
  361. B00000
  362. }, {
  363. B00000,
  364. B10101,
  365. B10101,
  366. B10101,
  367. B10101,
  368. B10101,
  369. B10101,
  370. B00000
  371. } };
  372. if (progress_bar_set != char_mode) {
  373. char_mode = progress_bar_set;
  374. lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
  375. lcd.createChar(LCD_STR_DEGREE[0], degree);
  376. lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
  377. lcd.createChar(LCD_STR_FEEDRATE[0], feedrate);
  378. lcd.createChar(LCD_STR_CLOCK[0], clock);
  379. if (progress_bar_set) {
  380. // Progress bar characters for info screen
  381. for (int i=3; i--;) lcd.createChar(LCD_STR_PROGRESS[i], progress[i]);
  382. }
  383. else {
  384. // Custom characters for submenus
  385. lcd.createChar(LCD_STR_UPLEVEL[0], uplevel);
  386. lcd.createChar(LCD_STR_REFRESH[0], refresh);
  387. lcd.createChar(LCD_STR_FOLDER[0], folder);
  388. }
  389. }
  390. #else
  391. lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
  392. lcd.createChar(LCD_STR_DEGREE[0], degree);
  393. lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
  394. lcd.createChar(LCD_STR_UPLEVEL[0], uplevel);
  395. lcd.createChar(LCD_STR_REFRESH[0], refresh);
  396. lcd.createChar(LCD_STR_FOLDER[0], folder);
  397. lcd.createChar(LCD_STR_FEEDRATE[0], feedrate);
  398. lcd.createChar(LCD_STR_CLOCK[0], clock);
  399. //lcd.createChar(LCD_STR_ARROW_UP[0], arrup);
  400. //lcd.createChar(LCD_STR_ARROW_DOWN[0], arrdown);
  401. #endif
  402. }
  403. void lcd_set_custom_characters_arrows()
  404. {
  405. byte arrdown[8] = {
  406. B00000,
  407. B00000,
  408. B00000,
  409. B00000,
  410. B00000,
  411. B10001,
  412. B01010,
  413. B00100
  414. };
  415. lcd.createChar(1, arrdown);
  416. }
  417. void lcd_set_custom_characters_progress()
  418. {
  419. byte progress[8] = {
  420. B11111,
  421. B11111,
  422. B11111,
  423. B11111,
  424. B11111,
  425. B11111,
  426. B11111,
  427. B11111,
  428. };
  429. lcd.createChar(1, progress);
  430. }
  431. void lcd_set_custom_characters_nextpage()
  432. {
  433. byte arrdown[8] = {
  434. B00000,
  435. B00000,
  436. B10001,
  437. B01010,
  438. B00100,
  439. B10001,
  440. B01010,
  441. B00100
  442. };
  443. byte confirm[8] = {
  444. B00000,
  445. B00001,
  446. B00011,
  447. B10110,
  448. B11100,
  449. B01000,
  450. B00000
  451. };
  452. lcd.createChar(1, arrdown);
  453. lcd.createChar(2, confirm);
  454. }
  455. void lcd_set_custom_characters_degree()
  456. {
  457. byte degree[8] = {
  458. B01100,
  459. B10010,
  460. B10010,
  461. B01100,
  462. B00000,
  463. B00000,
  464. B00000,
  465. B00000
  466. };
  467. lcd.createChar(1, degree);
  468. }
  469. static void lcd_implementation_init(
  470. #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
  471. bool progress_bar_set=true
  472. #endif
  473. ) {
  474. #if defined(LCD_I2C_TYPE_PCF8575)
  475. lcd.begin(LCD_WIDTH, LCD_HEIGHT);
  476. #ifdef LCD_I2C_PIN_BL
  477. lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE);
  478. lcd.setBacklight(HIGH);
  479. #endif
  480. #elif defined(LCD_I2C_TYPE_MCP23017)
  481. lcd.setMCPType(LTI_TYPE_MCP23017);
  482. lcd.begin(LCD_WIDTH, LCD_HEIGHT);
  483. lcd.setBacklight(0); //set all the LEDs off to begin with
  484. #elif defined(LCD_I2C_TYPE_MCP23008)
  485. lcd.setMCPType(LTI_TYPE_MCP23008);
  486. lcd.begin(LCD_WIDTH, LCD_HEIGHT);
  487. #elif defined(LCD_I2C_TYPE_PCA8574)
  488. lcd.init();
  489. lcd.backlight();
  490. #else
  491. lcd.begin(LCD_WIDTH, LCD_HEIGHT);
  492. #endif
  493. lcd_set_custom_characters(
  494. #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
  495. progress_bar_set
  496. #endif
  497. );
  498. lcd.clear();
  499. }
  500. static void lcd_implementation_init_noclear(
  501. #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
  502. bool progress_bar_set=true
  503. #endif
  504. ) {
  505. #if defined(LCD_I2C_TYPE_PCF8575)
  506. lcd.begin_noclear(LCD_WIDTH, LCD_HEIGHT);
  507. #ifdef LCD_I2C_PIN_BL
  508. lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE);
  509. lcd.setBacklight(HIGH);
  510. #endif
  511. #elif defined(LCD_I2C_TYPE_MCP23017)
  512. lcd.setMCPType(LTI_TYPE_MCP23017);
  513. lcd.begin_noclear(LCD_WIDTH, LCD_HEIGHT);
  514. lcd.setBacklight(0); //set all the LEDs off to begin with
  515. #elif defined(LCD_I2C_TYPE_MCP23008)
  516. lcd.setMCPType(LTI_TYPE_MCP23008);
  517. lcd.begin_noclear(LCD_WIDTH, LCD_HEIGHT);
  518. #elif defined(LCD_I2C_TYPE_PCA8574)
  519. lcd.init();
  520. lcd.backlight();
  521. #else
  522. lcd.begin_noclear(LCD_WIDTH, LCD_HEIGHT);
  523. #endif
  524. lcd_set_custom_characters(
  525. #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
  526. progress_bar_set
  527. #endif
  528. );
  529. }
  530. static void lcd_implementation_nodisplay()
  531. {
  532. lcd.noDisplay();
  533. }
  534. static void lcd_implementation_display()
  535. {
  536. lcd.display();
  537. }
  538. void lcd_implementation_clear()
  539. {
  540. lcd.clear();
  541. }
  542. /* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
  543. void lcd_printPGM(const char* str)
  544. {
  545. char c;
  546. while((c = pgm_read_byte(str++)) != '\0')
  547. {
  548. lcd.write(c);
  549. }
  550. }
  551. void lcd_print_at_PGM(uint8_t x, uint8_t y, const char* str)
  552. {
  553. lcd.setCursor(x, y);
  554. char c;
  555. while((c = pgm_read_byte(str++)) != '\0')
  556. {
  557. lcd.write(c);
  558. }
  559. }
  560. void lcd_implementation_write(char c)
  561. {
  562. lcd.write(c);
  563. }
  564. void lcd_implementation_print(int8_t i)
  565. {
  566. lcd.print(i);
  567. }
  568. void lcd_implementation_print_at(uint8_t x, uint8_t y, int8_t i)
  569. {
  570. lcd.setCursor(x, y);
  571. lcd.print(i);
  572. }
  573. void lcd_implementation_print(int i)
  574. {
  575. lcd.print(i);
  576. }
  577. void lcd_implementation_print_at(uint8_t x, uint8_t y, int i)
  578. {
  579. lcd.setCursor(x, y);
  580. lcd.print(i);
  581. }
  582. void lcd_implementation_print(float f)
  583. {
  584. lcd.print(f);
  585. }
  586. void lcd_implementation_print(const char *str)
  587. {
  588. lcd.print(str);
  589. }
  590. void lcd_implementation_print_at(uint8_t x, uint8_t y, const char *str)
  591. {
  592. lcd.setCursor(x, y);
  593. lcd.print(str);
  594. }
  595. /*
  596. 20x4 |01234567890123456789|
  597. |T 000/000D Z000.0 |
  598. |B 000/000D F100% |
  599. |SD100% T--:-- |
  600. |Status line.........|
  601. */
  602. static void lcd_implementation_status_screen()
  603. {
  604. int tHotend=int(degHotend(0) + 0.5);
  605. int tTarget=int(degTargetHotend(0) + 0.5);
  606. //Print the hotend temperature
  607. lcd.setCursor(0, 0);
  608. lcd.print(LCD_STR_THERMOMETER[0]);
  609. lcd.print(itostr3(tHotend));
  610. lcd.print('/');
  611. lcd.print(itostr3left(tTarget));
  612. lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
  613. lcd_printPGM(PSTR(" "));
  614. //Print the Z coordinates
  615. lcd.setCursor(LCD_WIDTH - 8-2, 0);
  616. #if 1
  617. lcd_printPGM(PSTR(" Z"));
  618. if (custom_message_type == 1) {
  619. // In a bed calibration mode.
  620. lcd_printPGM(PSTR(" --- "));
  621. } else {
  622. lcd.print(ftostr32sp(current_position[Z_AXIS] + 0.00001));
  623. lcd.print(' ');
  624. }
  625. #else
  626. lcd_printPGM(PSTR(" Queue:"));
  627. lcd.print(int(moves_planned()));
  628. lcd.print(' ');
  629. #endif
  630. //Print the Bedtemperature
  631. lcd.setCursor(0, 1);
  632. tHotend=int(degBed() + 0.5);
  633. tTarget=int(degTargetBed() + 0.5);
  634. lcd.print(LCD_STR_BEDTEMP[0]);
  635. lcd.print(itostr3(tHotend));
  636. lcd.print('/');
  637. lcd.print(itostr3left(tTarget));
  638. lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
  639. lcd_printPGM(PSTR(" "));
  640. #ifdef PLANNER_DIAGNOSTICS
  641. //Print Feedrate
  642. lcd.setCursor(LCD_WIDTH - 8-2, 1);
  643. lcd.print(LCD_STR_FEEDRATE[0]);
  644. lcd.print(itostr3(feedmultiply));
  645. lcd_printPGM(PSTR("% Q"));
  646. {
  647. uint8_t queue = planner_queue_min();
  648. if (queue < (BLOCK_BUFFER_SIZE >> 1)) {
  649. lcd.write('!');
  650. } else {
  651. lcd.write((char)(queue / 10) + '0');
  652. queue %= 10;
  653. }
  654. lcd.write((char)queue + '0');
  655. planner_queue_min_reset();
  656. }
  657. #else /* PLANNER_DIAGNOSTICS */
  658. //Print Feedrate
  659. lcd.setCursor(LCD_WIDTH - 8-2, 1);
  660. lcd_printPGM(PSTR(" "));
  661. lcd.print(LCD_STR_FEEDRATE[0]);
  662. lcd.print(itostr3(feedmultiply));
  663. lcd_printPGM(PSTR("% "));
  664. #endif /* PLANNER_DIAGNOSTICS */
  665. bool print_sd_status = true;
  666. #ifdef PINDA_THERMISTOR
  667. // if (farm_mode && (custom_message_type == 4))
  668. if (false)
  669. {
  670. lcd.setCursor(0, 2);
  671. lcd_printPGM(PSTR("P"));
  672. lcd.print(ftostr3(current_temperature_pinda));
  673. lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
  674. print_sd_status = false;
  675. }
  676. #endif //PINDA_THERMISTOR
  677. if (print_sd_status)
  678. {
  679. //Print SD status
  680. lcd.setCursor(0, 2);
  681. if (is_usb_printing)
  682. {
  683. lcd_printPGM(PSTR("--"));
  684. }
  685. else
  686. {
  687. lcd_printPGM(PSTR("SD"));
  688. }
  689. if (IS_SD_PRINTING)
  690. {
  691. lcd.print(itostr3(card.percentDone()));
  692. lcd.print('%');
  693. }
  694. else
  695. {
  696. if (is_usb_printing)
  697. {
  698. lcd_printPGM(PSTR(">USB"));
  699. }
  700. else
  701. {
  702. lcd_printPGM(PSTR("---"));
  703. lcd.print('%');
  704. }
  705. }
  706. }
  707. // Farm number display
  708. if (farm_mode)
  709. {
  710. lcd_printPGM(PSTR(" F"));
  711. lcd.print(farm_no);
  712. lcd_printPGM(PSTR(" "));
  713. // Beat display
  714. lcd.setCursor(LCD_WIDTH - 1, 0);
  715. if ( (millis() - kicktime) < 60000 ) {
  716. lcd_printPGM(PSTR("L"));
  717. }else{
  718. lcd_printPGM(PSTR(" "));
  719. }
  720. }
  721. else {
  722. #ifdef SNMM
  723. lcd_printPGM(PSTR(" E"));
  724. lcd.print(get_ext_nr() + 1);
  725. #else
  726. lcd.setCursor(LCD_WIDTH - 8 - 2, 2);
  727. lcd_printPGM(PSTR(" "));
  728. #endif
  729. }
  730. //Print time elapsed
  731. lcd.setCursor(LCD_WIDTH - 8 -1, 2);
  732. lcd_printPGM(PSTR(" "));
  733. lcd.print(LCD_STR_CLOCK[0]);
  734. if(starttime != 0)
  735. {
  736. uint16_t time = millis() / 60000 - starttime / 60000;
  737. lcd.print(itostr2(time/60));
  738. lcd.print(':');
  739. lcd.print(itostr2(time%60));
  740. }else{
  741. lcd_printPGM(PSTR("--:--"));
  742. }
  743. lcd_printPGM(PSTR(" "));
  744. #ifdef DEBUG_DISABLE_LCD_STATUS_LINE
  745. return;
  746. #endif //DEBUG_DISABLE_LCD_STATUS_LINE
  747. //Print status line
  748. lcd.setCursor(0, 3);
  749. // If heating in progress, set flag
  750. if (heating_status != 0) { custom_message = true; }
  751. if (IS_SD_PRINTING) {
  752. if (strcmp(longFilenameOLD, card.longFilename) != 0)
  753. {
  754. memset(longFilenameOLD, '\0', strlen(longFilenameOLD));
  755. sprintf_P(longFilenameOLD, PSTR("%s"), card.longFilename);
  756. scrollstuff = 0;
  757. }
  758. }
  759. // If printing from SD, show what we are printing
  760. if ((IS_SD_PRINTING) && !custom_message
  761. #ifdef DEBUG_BUILD
  762. && lcd_status_message[0] == 0
  763. #endif /* DEBUG_BUILD */
  764. )
  765. {
  766. if(strlen(card.longFilename) > LCD_WIDTH)
  767. {
  768. int inters = 0;
  769. int gh = scrollstuff;
  770. while( ((gh-scrollstuff)<LCD_WIDTH) && (inters == 0) )
  771. {
  772. if(card.longFilename[gh] == '\0')
  773. {
  774. lcd.setCursor(gh-scrollstuff, 3);
  775. lcd.print(card.longFilename[gh-1]);
  776. scrollstuff = 0;
  777. gh = scrollstuff;
  778. inters = 1;
  779. }
  780. else
  781. {
  782. lcd.setCursor(gh-scrollstuff, 3);
  783. lcd.print(card.longFilename[gh-1]);
  784. gh++;
  785. }
  786. }
  787. scrollstuff++;
  788. }
  789. else
  790. {
  791. lcd.print(longFilenameOLD);
  792. }
  793. }
  794. // If not, check for other special events
  795. else
  796. {
  797. if (custom_message)
  798. {
  799. // If heating flag, show progress of heating.
  800. if (heating_status != 0)
  801. {
  802. heating_status_counter++;
  803. if (heating_status_counter > 13)
  804. {
  805. heating_status_counter = 0;
  806. }
  807. lcd.setCursor(7, 3);
  808. lcd_printPGM(PSTR(" "));
  809. for (int dots = 0; dots < heating_status_counter; dots++)
  810. {
  811. lcd.setCursor(7 + dots, 3);
  812. lcd.print('.');
  813. }
  814. switch (heating_status)
  815. {
  816. case 1:
  817. lcd.setCursor(0, 3);
  818. lcd_printPGM(MSG_HEATING);
  819. break;
  820. case 2:
  821. lcd.setCursor(0, 3);
  822. lcd_printPGM(MSG_HEATING_COMPLETE);
  823. heating_status = 0;
  824. heating_status_counter = 0;
  825. custom_message = false;
  826. break;
  827. case 3:
  828. lcd.setCursor(0, 3);
  829. lcd_printPGM(MSG_BED_HEATING);
  830. break;
  831. case 4:
  832. lcd.setCursor(0, 3);
  833. lcd_printPGM(MSG_BED_DONE);
  834. heating_status = 0;
  835. heating_status_counter = 0;
  836. custom_message = false;
  837. break;
  838. default:
  839. break;
  840. }
  841. }
  842. // If mesh bed leveling in progress, show the status
  843. if (custom_message_type == 1)
  844. {
  845. if (custom_message_state > 10)
  846. {
  847. lcd.setCursor(0, 3);
  848. lcd_printPGM(PSTR(" "));
  849. lcd.setCursor(0, 3);
  850. lcd_printPGM(MSG_HOMEYZ_PROGRESS);
  851. lcd_printPGM(PSTR(" : "));
  852. lcd.print(custom_message_state-10);
  853. }
  854. else
  855. {
  856. if (custom_message_state == 3)
  857. {
  858. lcd_printPGM(WELCOME_MSG);
  859. lcd_setstatuspgm(WELCOME_MSG);
  860. custom_message = false;
  861. custom_message_type = 0;
  862. }
  863. if (custom_message_state > 3 && custom_message_state <= 10 )
  864. {
  865. lcd.setCursor(0, 3);
  866. lcd_printPGM(PSTR(" "));
  867. lcd.setCursor(0, 3);
  868. lcd_printPGM(MSG_HOMEYZ_DONE);
  869. custom_message_state--;
  870. }
  871. }
  872. }
  873. // If loading filament, print status
  874. if (custom_message_type == 2)
  875. {
  876. lcd.print(lcd_status_message);
  877. }
  878. // PID tuning in progress
  879. if (custom_message_type == 3) {
  880. lcd.print(lcd_status_message);
  881. if (pid_cycle <= pid_number_of_cycles && custom_message_state > 0) {
  882. lcd.setCursor(10, 3);
  883. lcd.print(itostr3(pid_cycle));
  884. lcd.print('/');
  885. lcd.print(itostr3left(pid_number_of_cycles));
  886. }
  887. }
  888. // PINDA temp calibration in progress
  889. if (custom_message_type == 4) {
  890. char progress[4];
  891. lcd.setCursor(0, 3);
  892. lcd_printPGM(MSG_TEMP_CALIBRATION);
  893. lcd.setCursor(12, 3);
  894. sprintf(progress, "%d/6", custom_message_state);
  895. lcd.print(progress);
  896. }
  897. // temp compensation preheat
  898. if (custom_message_type == 5) {
  899. lcd.setCursor(0, 3);
  900. lcd_printPGM(MSG_PINDA_PREHEAT);
  901. if (custom_message_state <= PINDA_HEAT_T) {
  902. lcd_printPGM(PSTR(": "));
  903. lcd.print(custom_message_state); //seconds
  904. lcd.print(' ');
  905. }
  906. }
  907. }
  908. else
  909. {
  910. // Nothing special, print status message normally
  911. lcd.print(lcd_status_message);
  912. }
  913. }
  914. // Fill the rest of line to have nice and clean output
  915. for(int fillspace = 0; fillspace<20;fillspace++)
  916. {
  917. if((lcd_status_message[fillspace] > 31 ))
  918. {
  919. }
  920. else
  921. {
  922. lcd.print(' ');
  923. }
  924. }
  925. }
  926. static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
  927. {
  928. char c;
  929. //Use all characters in narrow LCDs
  930. #if LCD_WIDTH < 20
  931. uint8_t n = LCD_WIDTH - 1 - 1;
  932. #else
  933. uint8_t n = LCD_WIDTH - 1 - 2;
  934. #endif
  935. lcd.setCursor(0, row);
  936. lcd.print(pre_char);
  937. while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
  938. {
  939. lcd.print(c);
  940. pstr++;
  941. n--;
  942. }
  943. while(n--)
  944. lcd.print(' ');
  945. lcd.print(post_char);
  946. lcd.print(' ');
  947. }
  948. static void lcd_implementation_drawmenu_generic_RAM(uint8_t row, const char* str, char pre_char, char post_char)
  949. {
  950. char c;
  951. //Use all characters in narrow LCDs
  952. #if LCD_WIDTH < 20
  953. uint8_t n = LCD_WIDTH - 1 - 1;
  954. #else
  955. uint8_t n = LCD_WIDTH - 1 - 2;
  956. #endif
  957. lcd.setCursor(0, row);
  958. lcd.print(pre_char);
  959. while( ((c = *str) != '\0') && (n>0) )
  960. {
  961. lcd.print(c);
  962. str++;
  963. n--;
  964. }
  965. while(n--)
  966. lcd.print(' ');
  967. lcd.print(post_char);
  968. lcd.print(' ');
  969. }
  970. static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data)
  971. {
  972. char c;
  973. //Use all characters in narrow LCDs
  974. #if LCD_WIDTH < 20
  975. uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data);
  976. #else
  977. uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data);
  978. #endif
  979. lcd.setCursor(0, row);
  980. lcd.print(pre_char);
  981. while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
  982. {
  983. lcd.print(c);
  984. pstr++;
  985. n--;
  986. }
  987. lcd.print(':');
  988. while(n--)
  989. lcd.print(' ');
  990. lcd.print(data);
  991. }
  992. static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data)
  993. {
  994. char c;
  995. //Use all characters in narrow LCDs
  996. #if LCD_WIDTH < 20
  997. uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data);
  998. #else
  999. uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data);
  1000. #endif
  1001. lcd.setCursor(0, row);
  1002. lcd.print(pre_char);
  1003. while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
  1004. {
  1005. lcd.print(c);
  1006. pstr++;
  1007. n--;
  1008. }
  1009. lcd.print(':');
  1010. while(n--)
  1011. lcd.print(' ');
  1012. lcd_printPGM(data);
  1013. }
  1014. #define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
  1015. #define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
  1016. #define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
  1017. #define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
  1018. #define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
  1019. #define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
  1020. #define lcd_implementation_drawmenu_setting_edit_float43_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
  1021. #define lcd_implementation_drawmenu_setting_edit_float43(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
  1022. #define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
  1023. #define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
  1024. #define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
  1025. #define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
  1026. #define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
  1027. #define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
  1028. #define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
  1029. #define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
  1030. #define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
  1031. #define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
  1032. //Add version for callback functions
  1033. #define lcd_implementation_drawmenu_setting_edit_callback_int3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
  1034. #define lcd_implementation_drawmenu_setting_edit_callback_int3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
  1035. #define lcd_implementation_drawmenu_setting_edit_callback_float3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
  1036. #define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
  1037. #define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
  1038. #define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
  1039. #define lcd_implementation_drawmenu_setting_edit_callback_float43_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
  1040. #define lcd_implementation_drawmenu_setting_edit_callback_float43(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
  1041. #define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
  1042. #define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
  1043. #define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
  1044. #define lcd_implementation_drawmenu_setting_edit_callback_float52(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
  1045. #define lcd_implementation_drawmenu_setting_edit_callback_float51_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
  1046. #define lcd_implementation_drawmenu_setting_edit_callback_float51(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
  1047. #define lcd_implementation_drawmenu_setting_edit_callback_long5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
  1048. #define lcd_implementation_drawmenu_setting_edit_callback_long5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
  1049. #define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
  1050. #define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
  1051. void lcd_implementation_drawedit(const char* pstr, char* value)
  1052. {
  1053. lcd.setCursor(1, 1);
  1054. lcd_printPGM(pstr);
  1055. lcd.print(':');
  1056. #if LCD_WIDTH < 20
  1057. lcd.setCursor(LCD_WIDTH - strlen(value), 1);
  1058. #else
  1059. lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1);
  1060. #endif
  1061. lcd.print(value);
  1062. }
  1063. void lcd_implementation_drawedit_2(const char* pstr, char* value)
  1064. {
  1065. lcd.setCursor(0, 1);
  1066. lcd_printPGM(pstr);
  1067. lcd.print(':');
  1068. lcd.setCursor((LCD_WIDTH - strlen(value))/2, 3);
  1069. lcd.print(value);
  1070. lcd.print(" mm");
  1071. }
  1072. static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
  1073. {
  1074. char c;
  1075. int enc_dif = encoderDiff;
  1076. uint8_t n = LCD_WIDTH - 1;
  1077. for(int g = 0; g<4;g++){
  1078. lcd.setCursor(0, g);
  1079. lcd.print(' ');
  1080. }
  1081. lcd.setCursor(0, row);
  1082. lcd.print('>');
  1083. int i = 1;
  1084. int j = 0;
  1085. char* longFilenameTMP = longFilename;
  1086. while((c = *longFilenameTMP) != '\0')
  1087. {
  1088. lcd.setCursor(i, row);
  1089. lcd.print(c);
  1090. i++;
  1091. longFilenameTMP++;
  1092. if(i==LCD_WIDTH){
  1093. i=1;
  1094. j++;
  1095. longFilenameTMP = longFilename + j;
  1096. n = LCD_WIDTH - 1;
  1097. for(int g = 0; g<300 ;g++){
  1098. manage_heater();
  1099. if(LCD_CLICKED || ( enc_dif != encoderDiff )){
  1100. longFilenameTMP = longFilename;
  1101. *(longFilenameTMP + LCD_WIDTH - 2) = '\0';
  1102. i = 1;
  1103. j = 0;
  1104. break;
  1105. }else{
  1106. if (j == 1) delay(3); //wait around 1.2 s to start scrolling text
  1107. delay(1); //then scroll with redrawing every 300 ms
  1108. }
  1109. }
  1110. }
  1111. }
  1112. if(c!='\0'){
  1113. lcd.setCursor(i, row);
  1114. lcd.print(c);
  1115. i++;
  1116. }
  1117. n=n-i+1;
  1118. while(n--)
  1119. lcd.print(' ');
  1120. }
  1121. static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, const char* filename, char* longFilename)
  1122. {
  1123. char c;
  1124. uint8_t n = LCD_WIDTH - 1;
  1125. lcd.setCursor(0, row);
  1126. lcd.print(' ');
  1127. if (longFilename[0] != '\0')
  1128. {
  1129. filename = longFilename;
  1130. longFilename[LCD_WIDTH-1] = '\0';
  1131. }
  1132. while( ((c = *filename) != '\0') && (n>0) )
  1133. {
  1134. lcd.print(c);
  1135. filename++;
  1136. n--;
  1137. }
  1138. while(n--)
  1139. lcd.print(' ');
  1140. }
  1141. static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
  1142. {
  1143. char c;
  1144. uint8_t n = LCD_WIDTH - 2;
  1145. lcd.setCursor(0, row);
  1146. lcd.print('>');
  1147. lcd.print(LCD_STR_FOLDER[0]);
  1148. if (longFilename[0] != '\0')
  1149. {
  1150. filename = longFilename;
  1151. longFilename[LCD_WIDTH-2] = '\0';
  1152. }
  1153. while( ((c = *filename) != '\0') && (n>0) )
  1154. {
  1155. lcd.print(c);
  1156. filename++;
  1157. n--;
  1158. }
  1159. while(n--)
  1160. lcd.print(' ');
  1161. }
  1162. static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pstr, const char* filename, char* longFilename)
  1163. {
  1164. char c;
  1165. uint8_t n = LCD_WIDTH - 2;
  1166. lcd.setCursor(0, row);
  1167. lcd.print(' ');
  1168. lcd.print(LCD_STR_FOLDER[0]);
  1169. if (longFilename[0] != '\0')
  1170. {
  1171. filename = longFilename;
  1172. longFilename[LCD_WIDTH-2] = '\0';
  1173. }
  1174. while( ((c = *filename) != '\0') && (n>0) )
  1175. {
  1176. lcd.print(c);
  1177. filename++;
  1178. n--;
  1179. }
  1180. while(n--)
  1181. lcd.print(' ');
  1182. }
  1183. #define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
  1184. #define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0])
  1185. #define lcd_implementation_drawmenu_back_RAM_selected(row, str, data) lcd_implementation_drawmenu_generic_RAM(row, str, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
  1186. #define lcd_implementation_drawmenu_back_RAM(row, str, data) lcd_implementation_drawmenu_generic_RAM(row, str, ' ', LCD_STR_UPLEVEL[0])
  1187. #define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
  1188. #define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0])
  1189. #define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
  1190. #define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
  1191. #define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
  1192. #define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
  1193. #define lcd_implementation_drawmenu_setlang_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
  1194. #define lcd_implementation_drawmenu_setlang(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
  1195. static void lcd_implementation_quick_feedback()
  1196. {
  1197. #ifdef LCD_USE_I2C_BUZZER
  1198. #if !defined(LCD_FEEDBACK_FREQUENCY_HZ) || !defined(LCD_FEEDBACK_FREQUENCY_DURATION_MS)
  1199. lcd_buzz(1000/6,100);
  1200. #else
  1201. lcd_buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS,LCD_FEEDBACK_FREQUENCY_HZ);
  1202. #endif
  1203. #elif defined(BEEPER) && BEEPER > -1
  1204. SET_OUTPUT(BEEPER);
  1205. #if !defined(LCD_FEEDBACK_FREQUENCY_HZ) || !defined(LCD_FEEDBACK_FREQUENCY_DURATION_MS)
  1206. for(int8_t i=0;i<10;i++)
  1207. {
  1208. WRITE(BEEPER,HIGH);
  1209. delayMicroseconds(100);
  1210. WRITE(BEEPER,LOW);
  1211. delayMicroseconds(100);
  1212. }
  1213. #else
  1214. for(int8_t i=0;i<(LCD_FEEDBACK_FREQUENCY_DURATION_MS / (1000 / LCD_FEEDBACK_FREQUENCY_HZ));i++)
  1215. {
  1216. WRITE(BEEPER,HIGH);
  1217. delayMicroseconds(1000000 / LCD_FEEDBACK_FREQUENCY_HZ / 2);
  1218. WRITE(BEEPER,LOW);
  1219. delayMicroseconds(1000000 / LCD_FEEDBACK_FREQUENCY_HZ / 2);
  1220. }
  1221. #endif
  1222. #endif
  1223. }
  1224. #ifdef LCD_HAS_STATUS_INDICATORS
  1225. static void lcd_implementation_update_indicators()
  1226. {
  1227. #if defined(LCD_I2C_PANELOLU2) || defined(LCD_I2C_VIKI)
  1228. //set the LEDS - referred to as backlights by the LiquidTWI2 library
  1229. static uint8_t ledsprev = 0;
  1230. uint8_t leds = 0;
  1231. if (target_temperature_bed > 0) leds |= LED_A;
  1232. if (target_temperature[0] > 0) leds |= LED_B;
  1233. if (fanSpeed) leds |= LED_C;
  1234. #if EXTRUDERS > 1
  1235. if (target_temperature[1] > 0) leds |= LED_C;
  1236. #endif
  1237. if (leds != ledsprev) {
  1238. lcd.setBacklight(leds);
  1239. ledsprev = leds;
  1240. }
  1241. #endif
  1242. }
  1243. #endif
  1244. #ifdef LCD_HAS_SLOW_BUTTONS
  1245. extern uint32_t blocking_enc;
  1246. static uint8_t lcd_implementation_read_slow_buttons()
  1247. {
  1248. #ifdef LCD_I2C_TYPE_MCP23017
  1249. uint8_t slow_buttons;
  1250. // Reading these buttons this is likely to be too slow to call inside interrupt context
  1251. // so they are called during normal lcd_update
  1252. slow_buttons = lcd.readButtons() << B_I2C_BTN_OFFSET;
  1253. #if defined(LCD_I2C_VIKI)
  1254. if(slow_buttons & (B_MI|B_RI)) { //LCD clicked
  1255. if(blocking_enc > millis()) {
  1256. slow_buttons &= ~(B_MI|B_RI); // Disable LCD clicked buttons if screen is updated
  1257. }
  1258. }
  1259. #endif
  1260. return slow_buttons;
  1261. #endif
  1262. }
  1263. #endif
  1264. #endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H