lang_en_pl.txt 28 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376
  1. #MSG_EXTRUDER_CORRECTION_OFF c=6 r=0
  2. " [off"
  3. "\x00"
  4. #MSG_PLANNER_BUFFER_BYTES c=0 r=0
  5. " PlannerBufferBytes: "
  6. " PlannerBufferBytes: "
  7. #MSG_FACTOR c=0 r=0
  8. " \002 Fact"
  9. " \002 Fact"
  10. #MSG_MAX c=0 r=0
  11. " \002 Max"
  12. " \002 Max"
  13. #MSG_MIN c=0 r=0
  14. " \002 Min"
  15. " \002 Min"
  16. #MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0
  17. " cold extrusion prevented"
  18. " cold extrusion prevented"
  19. #MSG_FREE_MEMORY c=0 r=0
  20. " Free Memory: "
  21. " Free Memory: "
  22. #MSG_CONFIGURATION_VER c=0 r=0
  23. " Last Updated: "
  24. " Last Updated: "
  25. #MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
  26. " of 4"
  27. " z 4"
  28. #MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
  29. " of 4"
  30. " z 4"
  31. #MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14 r=0
  32. " of 9"
  33. " z 9"
  34. #MSG_MEASURED_OFFSET c=0 r=0
  35. "[0;0] point offset"
  36. "\x00"
  37. #MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
  38. "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode"
  39. "\x00"
  40. #MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
  41. "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
  42. "\x00"
  43. #MSG_REFRESH c=0 r=0
  44. "\xf8Refresh"
  45. "\xf8Obnovit"
  46. #MSG_BABYSTEPPING_Z c=20 r=0
  47. "Adjusting Z"
  48. "Dostrojenie Z"
  49. #MSG_SELFTEST_CHECK_ALLCORRECT c=20 r=0
  50. "All correct "
  51. "Wszystko OK "
  52. #MSG_WIZARD_DONE c=20 r=8
  53. "All is done. Happy printing!"
  54. "Gotowe. Udanego druku!"
  55. #MSG_ALL c=19 r=1
  56. "All"
  57. "Wszystko"
  58. #MSG_PRESS c=20 r=0
  59. "and press the knob"
  60. "Nacisnij przycisk"
  61. #MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
  62. "Are left and right Z~carriages all up?"
  63. "Oba wozki dojechaly do gornej ramy?"
  64. #MSG_ADJUSTZ c=0 r=0
  65. "Auto adjust Z?"
  66. "Autodostroic Z?"
  67. #MSG_AUTO_HOME c=0 r=0
  68. "Auto home"
  69. "Auto home"
  70. #MSG_AUTOLOAD_FILAMENT c=17 r=0
  71. "AutoLoad filament"
  72. "\x00"
  73. #MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
  74. "Autoloading filament available only when filament sensor is turned on..."
  75. "\x00"
  76. #MSG_AUTOLOADING_ENABLED c=20 r=4
  77. "Autoloading filament is active, just press the knob and insert filament..."
  78. "\x00"
  79. #MSG_SELFTEST_AXIS_LENGTH c=0 r=0
  80. "Axis length"
  81. "\x00"
  82. #MSG_SELFTEST_AXIS c=0 r=0
  83. "Axis"
  84. "\x00"
  85. #MSG_BABYSTEPPING_X c=0 r=0
  86. "Babystepping X"
  87. "Babystepping X"
  88. #MSG_BABYSTEPPING_Y c=0 r=0
  89. "Babystepping Y"
  90. "Babystepping Y"
  91. #MSG_SELFTEST_BEDHEATER c=0 r=0
  92. "Bed / Heater"
  93. "Bed / Heater"
  94. #MSG_BED_DONE c=0 r=0
  95. "Bed done"
  96. "Stolik OK."
  97. #MSG_BED_HEATING c=0 r=0
  98. "Bed Heating"
  99. "Grzanie stolika.."
  100. #MSG_BED_CORRECTION_MENU c=0 r=0
  101. "Bed level correct"
  102. "Korekta podkladki"
  103. #MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=4
  104. "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
  105. "Kalibracja nieudana. Sensor nie dotknal. Zanieczysz. dysza? Czekam na reset."
  106. #MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED c=20 r=4
  107. "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset."
  108. "Kalibracja nieudana. Sensor odlaczony lub uszkodz. kabel. Czekam na reset."
  109. #MSG_BED_LEVELING_FAILED_POINT_HIGH c=20 r=4
  110. "Bed leveling failed. Sensor triggered too high. Waiting for reset."
  111. "Kalibracja Z nieudana. Sensor dotk. za wysoko. Czekam na reset."
  112. #MSG_BED c=0 r=0
  113. "Bed"
  114. "Stolik"
  115. #MSG_BEGIN_FILE_LIST c=0 r=0
  116. "Begin file list"
  117. "Begin file list"
  118. #MSG_MENU_BELT_STATUS c=15 r=1
  119. "Belt status"
  120. "\x00"
  121. #MSG_RECOVER_PRINT c=20 r=2
  122. "Blackout occurred. Recover print?"
  123. "\x00"
  124. #MSG_CALIBRATE_E c=20 r=1
  125. "Calibrate E"
  126. "Kalibruj E"
  127. #MSG_CALIBRATE_BED c=0 r=0
  128. "Calibrate XYZ"
  129. "Kalibracja XYZ"
  130. #MSG_HOMEYZ c=0 r=0
  131. "Calibrate Z"
  132. "Kalibruj Z"
  133. #MSG_CALIBRATE_PINDA c=17 r=1
  134. "Calibrate"
  135. "Skalibrowac"
  136. #MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
  137. "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
  138. "Kalibracja XYZ. Przekrec galke, aby przesunac os Z do gornych krancowek. Nacisnij, by potwierdzic."
  139. #MSG_HOMEYZ_PROGRESS c=0 r=0
  140. "Calibrating Z"
  141. "Kalibruje Z"
  142. #MSG_HOMEYZ_PROGRESS c=0 r=0
  143. "Calibrating Z"
  144. "Kalibruje Z"
  145. #MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
  146. "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
  147. "Kalibracja Z. Przekrec galke, aby przesunac os Z do gornych krancowek. Nacisnij, by potwierdzic."
  148. #MSG_HOMEYZ_DONE c=0 r=0
  149. "Calibration done"
  150. "Kalibracja OK"
  151. #MSG_MENU_CALIBRATION c=0 r=0
  152. "Calibration"
  153. "Kalibracja"
  154. #MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
  155. "Cannot enter subdir: "
  156. "Cannot enter subdir: "
  157. #MSG_SD_CANT_OPEN_SUBDIR c=0 r=0
  158. "Cannot open subdir"
  159. "Cannot open subdir"
  160. #MSG_SD_INSERTED c=0 r=0
  161. "Card inserted"
  162. "Karta wlozona"
  163. #MSG_SD_REMOVED c=0 r=0
  164. "Card removed"
  165. "Karta wyjeta"
  166. #MSG_NOT_COLOR c=0 r=0
  167. "Color not correct"
  168. "Kolor zanieczysz."
  169. #MSG_COOLDOWN c=0 r=0
  170. "Cooldown"
  171. "Wychlodzic"
  172. #MSG_CRASHDETECT_ON c=0 r=0
  173. "Crash det. [on]"
  174. "\x00"
  175. #MSG_CRASHDETECT_NA c=0 r=0
  176. "Crash det. [N/A]"
  177. "\x00"
  178. #MSG_CRASHDETECT_OFF c=0 r=0
  179. "Crash det. [off]"
  180. "\x00"
  181. #MSG_CRASH_DETECTED c=20 r=1
  182. "Crash detected."
  183. "\x00"
  184. #MSG_CURRENT c=19 r=1
  185. "Current"
  186. "Tylko aktualne"
  187. #MSG_DATE c=17 r=1
  188. "Date:"
  189. "Data:"
  190. #MSG_DISABLE_STEPPERS c=0 r=0
  191. "Disable steppers"
  192. "Wylaczyc silniki"
  193. #MSG_BABYSTEP_Z_NOT_SET c=20 r=12
  194. "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
  195. "Odleglosc dyszy od podkladki nie jest skalibrowana. Postepuj zgodnie z instrukcja rozdzial Zaczynamy, podrozdzial Kalibracja pierwszej warstwy."
  196. #MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
  197. "Do you want to repeat last step to readjust distance between nozzle and heatbed?"
  198. "Chcesz powtorzyc ostatni krok i przestawic odleglosc miedzy dysza a stolikiem?"
  199. #MSG_CLEAN_NOZZLE_E c=20 r=8
  200. "E calibration finished. Please clean the nozzle. Click when done."
  201. "Kalibracja E skonczona. Prosze oczyscic dysze. Potem potwierdzic przyciskiem. "
  202. #MSG_EXTRUDER_CORRECTION c=9 r=0
  203. "E-correct"
  204. "\x00"
  205. #MSG_END_FILE_LIST c=0 r=0
  206. "End file list"
  207. "End file list"
  208. #MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1
  209. "Endstop not hit"
  210. "Endstop not hit"
  211. #MSG_SELFTEST_ENDSTOP c=0 r=0
  212. "Endstop"
  213. "Endstop"
  214. #MSG_ENDSTOPS_HIT c=0 r=0
  215. "endstops hit: "
  216. "endstops hit: "
  217. #MSG_SELFTEST_ENDSTOPS c=0 r=0
  218. "Endstops"
  219. "Endstops"
  220. #MSG_LANGUAGE_NAME c=0 r=0
  221. "English"
  222. "Polski"
  223. #MSG_Enqueing c=0 r=0
  224. "enqueing \x22"
  225. "enqueing \x22"
  226. #MSG_STACK_ERROR c=20 r=4
  227. "Error - static memory has been overwritten"
  228. "\x00"
  229. #MSG_SD_ERR_WRITE_TO_FILE c=0 r=0
  230. "error writing to file"
  231. "error writing to file"
  232. #MSG_FSENS_NOT_RESPONDING c=20 r=4
  233. "ERROR: Filament sensor is not responding, please check connection."
  234. "\x00"
  235. #MSG_ERROR c=0 r=0
  236. "ERROR:"
  237. "BLAD:"
  238. #MSG_EXTRUDER_1 c=17 r=1
  239. "Extruder 1"
  240. "Ekstruder 1"
  241. #MSG_EXTRUDER_2 c=17 r=1
  242. "Extruder 2"
  243. "Ekstruder 2"
  244. #MSG_EXTRUDER_3 c=17 r=1
  245. "Extruder 3"
  246. "Ekstruder 3"
  247. #MSG_EXTRUDER_4 c=17 r=1
  248. "Extruder 4"
  249. "Ekstruder 4"
  250. #MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
  251. "Extruder fan:"
  252. "\x00"
  253. #MSG_INFO_EXTRUDER c=15 r=1
  254. "Extruder info"
  255. "\x00"
  256. #MSG_MOVE_E c=0 r=0
  257. "Extruder"
  258. "Extruder"
  259. #MSG_MOVE_E c=0 r=0
  260. "Extruder"
  261. "Extruder"
  262. #MSG_FSENS_AUTOLOAD_ON c=17 r=1
  263. "F. autoload [on]"
  264. "\x00"
  265. #MSG_FSENS_AUTOLOAD_NA c=17 r=1
  266. "F. autoload [N/A]"
  267. "\x00"
  268. #MSG_FSENS_AUTOLOAD_OFF c=17 r=1
  269. "F. autoload [off]"
  270. "\x00"
  271. #MSG_FAN_SPEED c=14 r=0
  272. "Fan speed"
  273. "Predkosc went."
  274. #MSG_SELFTEST_FAN c=20 r=0
  275. "Fan test"
  276. "Test wentylatora"
  277. #MSG_FANS_CHECK_ON c=17 r=1
  278. "Fans check [on]"
  279. "\x00"
  280. #MSG_FANS_CHECK_OFF c=17 r=1
  281. "Fans check [off]"
  282. "\x00"
  283. #MSG_FSENSOR_ON c=0 r=0
  284. "Fil. sensor [on]"
  285. "\x00"
  286. #MSG_FSENSOR_NA c=0 r=0
  287. "Fil. sensor [N/A]"
  288. "\x00"
  289. #MSG_FSENSOR_OFF c=0 r=0
  290. "Fil. sensor [off]"
  291. "\x00"
  292. #MSG_FILAMENT_CLEAN c=20 r=2
  293. "Filament extruding & with correct color?"
  294. "Czy kolor jest czysty?"
  295. #MSG_NOT_LOADED c=19 r=0
  296. "Filament not loaded"
  297. "Brak filamentu"
  298. #MSG_FILAMENT_SENSOR c=20 r=0
  299. "Filament sensor"
  300. "\x00"
  301. #MSG_SELFTEST_FILAMENT_SENSOR c=18 r=0
  302. "Filament sensor:"
  303. "\x00"
  304. #MSG_STATS_FILAMENTUSED c=20 r=0
  305. "Filament used: "
  306. "Filament : "
  307. #MSG_FILE_INCOMPLETE c=20 r=2
  308. "File incomplete. Continue anyway?"
  309. "\x00"
  310. #MSG_SD_FILE_OPENED c=0 r=0
  311. "File opened: "
  312. "File opened: "
  313. #MSG_SD_FILE_SELECTED c=0 r=0
  314. "File selected"
  315. "File selected"
  316. #MSG_FINISHING_MOVEMENTS c=20 r=1
  317. "Finishing movements"
  318. "Konczenie druku"
  319. #MSG_V2_CALIBRATION c=17 r=1
  320. "First layer cal."
  321. "Kal. 1. warstwy"
  322. #MSG_WIZARD_SELFTEST c=20 r=8
  323. "First, I will run the selftest to check most common assembly problems."
  324. "Najpierw wlacze autotest w celu kontrolli najczestszych problemow z montazem."
  325. #MSG_FLOW c=0 r=0
  326. "Flow"
  327. "Przeplyw"
  328. #MSG_PRUSA3D_FORUM c=0 r=0
  329. "forum.prusa3d.com"
  330. "forum.prusa3d.cz"
  331. #MSG_SELFTEST_COOLING_FAN c=20 r=0
  332. "Front print fan?"
  333. "Przedni went. druku?"
  334. #MSG_BED_CORRECTION_FRONT c=14 r=1
  335. "Front side[um]"
  336. "Do przodu [um]"
  337. #MSG_SELFTEST_FANS c=0 r=0
  338. "Front/left fans"
  339. "\x00"
  340. #MSG_SELFTEST_HEATERTHERMISTOR c=0 r=0
  341. "Heater/Thermistor"
  342. "Heater/Thermistor"
  343. #MSG_BED_HEATING_SAFETY_DISABLED c=0 r=0
  344. "Heating disabled by safety timer."
  345. "\x00"
  346. #MSG_HEATING_COMPLETE c=20 r=0
  347. "Heating done."
  348. "Grzanie OK."
  349. #MSG_HEATING c=0 r=0
  350. "Heating"
  351. "Grzanie..."
  352. #MSG_WIZARD_WELCOME c=20 r=7
  353. "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
  354. "Czesc, jestem Twoja drukarka Original Prusa i3. Czy potrzebujesz pomocy z instalacja?"
  355. #MSG_PRUSA3D_HOWTO c=0 r=0
  356. "howto.prusa3d.com"
  357. "howto.prusa3d.cz"
  358. #MSG_CHANGE_EXTR c=20 r=1
  359. "Change extruder"
  360. "Zmienic ekstruder"
  361. #MSG_FILAMENTCHANGE c=0 r=0
  362. "Change filament"
  363. "Wymienic filament"
  364. #MSG_CNG_SDCARD c=0 r=0
  365. "Change SD card"
  366. "Vymenit SD"
  367. #MSG_CHANGE_SUCCESS c=0 r=0
  368. "Change success!"
  369. "Wymiana ok!"
  370. #MSG_CORRECTLY c=20 r=0
  371. "Changed correctly?"
  372. "Wymiana ok?"
  373. #MSG_CHANGING_FILAMENT c=20 r=0
  374. "Changing filament!"
  375. "Wymiana filamentu"
  376. #MSG_SELFTEST_CHECK_BED c=20 r=0
  377. "Checking bed "
  378. "Kontrola bed "
  379. #MSG_SELFTEST_CHECK_ENDSTOPS c=20 r=0
  380. "Checking endstops"
  381. "Kontrola endstops"
  382. #MSG_SELFTEST_CHECK_HOTEND c=20 r=0
  383. "Checking hotend "
  384. "Kontrola hotend "
  385. #MSG_SELFTEST_CHECK_FSENSOR c=20 r=0
  386. "Checking sensors "
  387. "\x00"
  388. #MSG_SELFTEST_CHECK_X c=20 r=0
  389. "Checking X axis "
  390. "Kontrola X axis "
  391. #MSG_SELFTEST_CHECK_Y c=20 r=0
  392. "Checking Y axis "
  393. "Kontrola Y axis "
  394. #MSG_SELFTEST_CHECK_Z c=20 r=0
  395. "Checking Z axis "
  396. "Kontrola Z axis "
  397. #MSG_ERR_CHECKSUM_MISMATCH c=0 r=0
  398. "checksum mismatch, Last Line: "
  399. "checksum mismatch, Last Line: "
  400. #MSG_CHOOSE_EXTRUDER c=20 r=1
  401. "Choose extruder:"
  402. "Wybierz ekstruder"
  403. #MSG_WIZARD_XYZ_CAL c=20 r=8
  404. "I will run xyz calibration now. It will take approx. 12 mins."
  405. "Wlaczam kalibracje xyz. Zajmie to ok. 12 min."
  406. #MSG_WIZARD_Z_CAL c=20 r=8
  407. "I will run z calibration now."
  408. "Wlaczam kalibracje z."
  409. #MSG_WIZARD_V2_CAL_2 c=20 r=12
  410. "I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
  411. "Zaczne drukowac linie. Stopniowo opuszczaj dysze przekrecajac guzik, poki nie uzyskasz optymalnej wysokosci. Sprawdz obrazki w naszym poradniku w rozdz. Kalibracja"
  412. #MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
  413. "Improving bed calibration point"
  414. "Poprawiam precyzyjnosc punktu kalibracyjnego"
  415. #MSG_WATCH c=0 r=0
  416. "Info screen"
  417. "Informacje"
  418. #MSG_INIT_SDCARD c=0 r=0
  419. "Init. SD card"
  420. "Inic. SD"
  421. #MSG_FILAMENT_LOADING_T0 c=20 r=4
  422. "Insert filament into extruder 1. Click when done."
  423. "Wloz filament do ekstrudera 1. Potwierdz przyciskiem."
  424. #MSG_FILAMENT_LOADING_T1 c=20 r=4
  425. "Insert filament into extruder 2. Click when done."
  426. "Wloz filament do ekstrudera 2. Potwierdz przyciskiem."
  427. #MSG_FILAMENT_LOADING_T2 c=20 r=4
  428. "Insert filament into extruder 3. Click when done."
  429. "Wloz filament do ekstrudera 3. Potwierdz przyciskiem."
  430. #MSG_FILAMENT_LOADING_T3 c=20 r=4
  431. "Insert filament into extruder 4. Click when done."
  432. "Wloz filament do ekstrudera 4. Potwierdz przyciskiem."
  433. #MSG_INSERT_FILAMENT c=20 r=0
  434. "Insert filament"
  435. "Wprowadz filament"
  436. #MSG_WIZARD_FILAMENT_LOADED c=20 r=2
  437. "Is filament loaded?"
  438. "Filament jest zaladowany?"
  439. #MSG_WIZARD_PLA_FILAMENT c=20 r=2
  440. "Is it PLA filament?"
  441. "Czy to filament PLA?"
  442. #MSG_PLA_FILAMENT_LOADED c=20 r=2
  443. "Is PLA filament loaded?"
  444. "Fialment PLA jest zaladowany?"
  445. #MSG_STEEL_SHEET_CHECK c=20 r=2
  446. "Is steel sheet on heatbed?"
  447. "\x00"
  448. #MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20 r=0
  449. "Iteration "
  450. "Iteracja "
  451. #MSG_KILLED c=0 r=0
  452. "KILLED. "
  453. "KILLED. "
  454. #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
  455. "Left hotend fan?"
  456. "Lewy went na dysze?"
  457. #MSG_BED_CORRECTION_LEFT c=14 r=1
  458. "Left side [um]"
  459. "W lewo [um]"
  460. #MSG_LEFT c=12 r=1
  461. "Left:"
  462. "Lewy:"
  463. #MSG_BABYSTEP_Z c=0 r=0
  464. "Live adjust Z"
  465. "Dostrojenie osy Z"
  466. #MSG_LOAD_ALL c=0 r=0
  467. "Load all"
  468. "Zalad. wszystkie"
  469. #MSG_LOAD_FILAMENT_1 c=17 r=0
  470. "Load filament 1"
  471. "Zaladowac fil. 1"
  472. #MSG_LOAD_FILAMENT_2 c=17 r=0
  473. "Load filament 2"
  474. "Zaladowac fil. 2"
  475. #MSG_LOAD_FILAMENT_3 c=17 r=0
  476. "Load filament 3"
  477. "Zaladowac fil. 3"
  478. #MSG_LOAD_FILAMENT_4 c=17 r=0
  479. "Load filament 4"
  480. "Zaladowac fil. 4"
  481. #MSG_LOAD_FILAMENT c=17 r=0
  482. "Load filament"
  483. "Wprowadz filament"
  484. #MSG_LOADING_COLOR c=0 r=0
  485. "Loading color"
  486. "Czyszcz. koloru"
  487. #MSG_LOADING_FILAMENT c=20 r=0
  488. "Loading filament"
  489. "Wprow. filamentu"
  490. #MSG_LOOSE_PULLEY c=20 r=1
  491. "Loose pulley"
  492. "Kolo pasowe"
  493. #MSG_M104_INVALID_EXTRUDER c=0 r=0
  494. "M104 Invalid extruder "
  495. "M104 Invalid extruder "
  496. #MSG_M105_INVALID_EXTRUDER c=0 r=0
  497. "M105 Invalid extruder "
  498. "M105 Invalid extruder "
  499. #MSG_M109_INVALID_EXTRUDER c=0 r=0
  500. "M109 Invalid extruder "
  501. "M109 Invalid extruder "
  502. #MSG_M117_V2_CALIBRATION c=25 r=1
  503. "M117 First layer cal."
  504. "M117 Kal. 1. warstwy"
  505. #MSG_M200_INVALID_EXTRUDER c=0 r=0
  506. "M200 Invalid extruder "
  507. "M200 Invalid extruder "
  508. #MSG_M218_INVALID_EXTRUDER c=0 r=0
  509. "M218 Invalid extruder "
  510. "M218 Invalid extruder "
  511. #MSG_M221_INVALID_EXTRUDER c=0 r=0
  512. "M221 Invalid extruder "
  513. "M221 Invalid extruder "
  514. #MSG_MAIN c=0 r=0
  515. "Main"
  516. "Menu glowne"
  517. #MSG_MARK_FIL c=20 r=8
  518. "Mark filament 100mm from extruder body. Click when done."
  519. "Prosze oznaczyc filament 100 mm od ciala ekstrudera. Potwierdzic przyciskiem."
  520. #MSG_MEASURED_SKEW c=15 r=1
  521. "Measured skew:"
  522. "Zmier. sciecie:"
  523. #MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60 r=0
  524. "Measuring reference height of calibration point"
  525. "Okreslam wysokosc odniesienia punktu kalibracyjnego"
  526. #MSG_MESH_BED_LEVELING c=0 r=0
  527. "Mesh Bed Leveling"
  528. "Mesh Bed Leveling"
  529. #MSG_STEALTH_MODE_OFF c=0 r=0
  530. "Mode [Normal]"
  531. "\x00"
  532. #MSG_SILENT_MODE_ON c=0 r=0
  533. "Mode [silent]"
  534. "Tryb [cichy]"
  535. #MSG_STEALTH_MODE_ON c=0 r=0
  536. "Mode [Stealth]"
  537. "\x00"
  538. #MSG_AUTO_MODE_ON c=0 r=0
  539. "Mode [auto power]"
  540. "\x00"
  541. #MSG_SILENT_MODE_OFF c=0 r=0
  542. "Mode [high power]"
  543. "Tryb[w wydajnosc]"
  544. #MSG_SELFTEST_MOTOR c=0 r=0
  545. "Motor"
  546. "Silnik"
  547. #MSG_MOVE_AXIS c=0 r=0
  548. "Move axis"
  549. "Ruch osi"
  550. #MSG_MOVE_X c=0 r=0
  551. "Move X"
  552. "Przesunac X"
  553. #MSG_MOVE_Y c=0 r=0
  554. "Move Y"
  555. "Przesunac Y"
  556. #MSG_MOVE_Z c=0 r=0
  557. "Move Z"
  558. "Przesunac Z"
  559. #MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
  560. "New firmware version available:"
  561. "Wyszla nowa wersja firmware:"
  562. #MSG_ERR_NO_CHECKSUM c=0 r=0
  563. "No Checksum with line number, Last Line: "
  564. "No Checksum with line number, Last Line: "
  565. #MSG_NO_MOVE c=0 r=0
  566. "No move."
  567. "No move."
  568. #MSG_NO_CARD c=0 r=0
  569. "No SD card"
  570. "Brak karty SD"
  571. #MSG_ERR_NO_THERMISTORS c=0 r=0
  572. "No thermistors - no temperature"
  573. "No thermistors - no temperature"
  574. #MSG_NO c=0 r=0
  575. "No"
  576. "Nie"
  577. #MSG_SELFTEST_NOTCONNECTED c=0 r=0
  578. "Not connected"
  579. "Nie podlaczono "
  580. #MSG_SELFTEST_FAN_NO c=19 r=0
  581. "Not spinning"
  582. "Nie kreci sie"
  583. #MSG_WIZARD_V2_CAL c=20 r=8
  584. "Now I will calibrate distance between tip of the nozzle and heatbed surface."
  585. "Kalibruje odleglosc miedzy koncowka dyszy a stolikiem."
  586. #MSG_WIZARD_WILL_PREHEAT c=20 r=4
  587. "Now I will preheat nozzle for PLA."
  588. "Nagrzewam dysze dla PLA."
  589. #MSG_INFO_NOZZLE_FAN c=11 r=1
  590. "Nozzle FAN:"
  591. "\x00"
  592. #MSG_NOZZLE c=0 r=0
  593. "Nozzle"
  594. "Dysza"
  595. #MSG_NOZZLE1 c=0 r=0
  596. "Nozzle2"
  597. "Tryska2"
  598. #MSG_NOZZLE2 c=0 r=0
  599. "Nozzle3"
  600. "Tryska3"
  601. #MSG_OK c=0 r=0
  602. "ok"
  603. "ok"
  604. #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
  605. "Old settings found. Default PID, Esteps etc. will be set."
  606. "\x00"
  607. #MSG_SD_OPEN_FILE_FAIL c=0 r=0
  608. "open failed, File: "
  609. "open failed, File: "
  610. #MSG_ENDSTOP_OPEN c=0 r=0
  611. "open"
  612. "open"
  613. #MSG_SD_OPENROOT_FAIL c=0 r=0
  614. "openRoot failed"
  615. "openRoot failed"
  616. #MSG_PAUSE_PRINT c=0 r=0
  617. "Pause print"
  618. "Przerwac druk"
  619. #MSG_PICK_Z c=0 r=0
  620. "Pick print"
  621. "Vyberte vytisk"
  622. #MSG_PID_RUNNING c=20 r=1
  623. "PID cal. "
  624. "Kal. PID"
  625. #MSG_PID_FINISHED c=20 r=1
  626. "PID cal. finished"
  627. "Kal. PID zakonczona"
  628. #MSG_PID_EXTRUDER c=17 r=1
  629. "PID calibration"
  630. "Kalibracja PID"
  631. #MSG_PINDA_PREHEAT c=20 r=1
  632. "PINDA Heating"
  633. "Grzanie PINDA"
  634. #MSG_PAPER c=20 r=8
  635. "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
  636. "Umiesc kartke papieru na podkladce i trzymaj pod dysza podczas pomiaru pierwszych 4 punktow. Jesli dysza zahaczy o papier, wylacz drukarke."
  637. #MSG_WIZARD_CLEAN_HEATBED c=20 r=8
  638. "Please clean heatbed and then press the knob."
  639. "Prosze oczysc stolik i nacisnij guzik."
  640. #MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
  641. "Please clean the nozzle for calibration. Click when done."
  642. "Dla prawidl. kalibracji prosze oczyscic dysze. Potw. guzikiem."
  643. #MSG_SELFTEST_PLEASECHECK c=0 r=0
  644. "Please check :"
  645. "Skontroluj :"
  646. #MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
  647. "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."
  648. "Prosze sprawdz nasz poradnik i napraw problem. Potem przywroc Wizard restartujac drukarke."
  649. #MSG_WIZARD_LOAD_FILAMENT c=20 r=8
  650. "Please insert PLA filament to the extruder, then press knob to load it."
  651. "Prosze umiesc filament PLA w ekstruderze i nacisnij przycisk by zaladowac."
  652. #MSG_WIZARD_INSERT_CORRECT_FILAMENT c=20 r=8
  653. "Please load PLA filament and then resume Wizard by rebooting the printer."
  654. "Prosze zaladuj filament PLA i przywroc Wizard przez restart drukarki."
  655. #MSG_PLEASE_LOAD_PLA c=20 r=4
  656. "Please load PLA filament first."
  657. "Prosze, najpierw zaladuj filament PLA."
  658. #MSG_CHECK_IDLER c=20 r=4
  659. "Please open idler and remove filament manually."
  660. "\x00"
  661. #MSG_PLACE_STEEL_SHEET c=20 r=4
  662. "Please place steel sheet on heatbed."
  663. "\x00"
  664. #MSG_PRESS_TO_UNLOAD c=20 r=4
  665. "Please press the knob to unload filament"
  666. "\x00"
  667. #MSG_PULL_OUT_FILAMENT c=20 r=4
  668. "Please pull out filament immediately"
  669. "\x00"
  670. #MSG_REMOVE_STEEL_SHEET c=20 r=4
  671. "Please remove steel sheet from heatbed."
  672. "\x00"
  673. #MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20 r=0
  674. "Please upgrade."
  675. "Prosze zaktualizowac"
  676. #MSG_PLEASE_WAIT c=20 r=0
  677. "Please wait"
  678. "Prosze czekac"
  679. #MSG_POWERUP c=0 r=0
  680. "PowerUp"
  681. "PowerUp"
  682. #MSG_PREHEAT_NOZZLE c=20 r=0
  683. "Preheat the nozzle!"
  684. "Nagrzej dysze!"
  685. #MSG_PREHEAT c=0 r=0
  686. "Preheat"
  687. "Grzanie"
  688. #MSG_WIZARD_HEATING c=20 r=3
  689. "Preheating nozzle. Please wait."
  690. "Nagrzewanie dyszy. Prosze czekac."
  691. #MSG_PREPARE_FILAMENT c=20 r=1
  692. "Prepare new filament"
  693. "Przygotuj filament"
  694. #MSG_PRESS_TO_PREHEAT c=20 r=4
  695. "Press knob to preheat nozzle and continue."
  696. "\x00"
  697. #MSG_PRINT_ABORTED c=20 r=0
  698. "Print aborted"
  699. "Druk przerwany"
  700. #MSG_INFO_PRINT_FAN c=11 r=1
  701. "Print FAN: "
  702. "\x00"
  703. #MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
  704. "Print fan:"
  705. "\x00"
  706. #MSG_CARD_MENU c=0 r=0
  707. "Print from SD"
  708. "Druk z SD"
  709. #MSG_PRINT_PAUSED c=20 r=1
  710. "Print paused"
  711. "Druk zatrzymany"
  712. #MSG_STATS_PRINTTIME c=20 r=0
  713. "Print time: "
  714. "Czas druku : "
  715. #MSG_PRINTER_DISCONNECTED c=20 r=1
  716. "Printer disconnected"
  717. "\x00"
  718. #MSG_ERR_KILLED c=0 r=0
  719. "Printer halted. kill() called!"
  720. "Printer halted. kill() called!"
  721. #MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
  722. "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
  723. "Drukarka nie zostala jeszcze skalibrowana. Prosze kierowac sie instrukcja, rozdzial Zaczynamy, podrozdzial Selftest."
  724. #MSG_ERR_STOPPED c=0 r=0
  725. "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
  726. "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
  727. #WELCOME_MSG c=20 r=0
  728. "Prusa i3 MK3 ready."
  729. "Prusa i3 MK3 gotowa"
  730. #MSG_PRUSA3D c=0 r=0
  731. "prusa3d.com"
  732. "prusa3d.cz"
  733. #MSG_BED_CORRECTION_REAR c=14 r=1
  734. "Rear side [um]"
  735. "Do tylu [um]"
  736. #MSG_RECOVERING_PRINT c=20 r=1
  737. "Recovering print "
  738. "\x00"
  739. #MSG_M119_REPORT c=0 r=0
  740. "Reporting endstop status"
  741. "Reporting endstop status"
  742. #MSG_RESEND c=0 r=0
  743. "Resend: "
  744. "Resend: "
  745. #MSG_CALIBRATE_BED_RESET c=0 r=0
  746. "Reset XYZ calibr."
  747. "Reset kalibr. XYZ"
  748. #MSG_BED_CORRECTION_RESET c=0 r=0
  749. "Reset"
  750. "Reset"
  751. #MSG_RESUME_PRINT c=0 r=0
  752. "Resume print"
  753. "Kontynuowac"
  754. #MSG_RESUMING c=0 r=0
  755. "Resuming print"
  756. "Wznowienie druku"
  757. #MSG_RESUMING c=0 r=0
  758. "Resuming print"
  759. "Wznowienie druku"
  760. #MSG_BED_CORRECTION_RIGHT c=14 r=1
  761. "Right side[um]"
  762. "W prawo [um]"
  763. #MSG_RIGHT c=12 r=1
  764. "Right:"
  765. "Prawy:"
  766. #MSG_E_CAL_KNOB c=20 r=8
  767. "Rotate knob until mark reaches extruder body. Click when done."
  768. "Prosze otaczac przycisk poki znacznik nie dosiegnie ciala ekstrudera. Potwierdzic przyciskiem."
  769. #MSG_SECOND_SERIAL_ON c=17 r=1
  770. "RPi port [on]"
  771. "\x00"
  772. #MSG_SECOND_SERIAL_OFF c=17 r=1
  773. "RPi port [off]"
  774. "\x00"
  775. #MSG_WIZARD_RERUN c=20 r=7
  776. "Running Wizard will delete current calibration results and start from the beginning. Continue?"
  777. "Wlaczenie Wizard usunie obecne dane kalibracyjne i zacznie od nowa. Kontynuowac?"
  778. #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1
  779. "SD card [normal]"
  780. "karta SD [normal]"
  781. #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
  782. "SD card [FlshAir]"
  783. "karta SD[FlshAir]"
  784. #MSG_SD_CARD_OK c=0 r=0
  785. "SD card ok"
  786. "SD card ok"
  787. #MSG_SD_INIT_FAIL c=0 r=0
  788. "SD init fail"
  789. "SD init fail"
  790. #MSG_SD_PRINTING_BYTE c=0 r=0
  791. "SD printing byte "
  792. "SD printing byte "
  793. #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
  794. "Searching bed calibration point"
  795. "Szukam punktu kalibracyjnego podkladki"
  796. #MSG_LANGUAGE_SELECT c=0 r=0
  797. "Select language"
  798. "Wybor jezyka"
  799. #MSG_SELFTEST_OK c=0 r=0
  800. "Self test OK"
  801. "Self test OK"
  802. #MSG_SELFTEST_START c=20 r=0
  803. "Self test start "
  804. "Self test start "
  805. #MSG_SELFTEST c=0 r=0
  806. "Selftest "
  807. "Selftest "
  808. #MSG_SELFTEST_ERROR c=0 r=0
  809. "Selftest error !"
  810. "Selftest error !"
  811. #MSG_SELFTEST_FAILED c=20 r=0
  812. "Selftest failed "
  813. "Selftest nieudany"
  814. #MSG_FORCE_SELFTEST c=20 r=8
  815. "Selftest will be run to calibrate accurate sensorless rehoming."
  816. "\x00"
  817. #MSG_SET_TEMPERATURE c=19 r=1
  818. "Set temperature:"
  819. "Ustawic temperature"
  820. #MSG_SETTINGS c=0 r=0
  821. "Settings"
  822. "Ustawienia"
  823. #MSG_SEVERE_SKEW c=15 r=1
  824. "Severe skew:"
  825. "Ostre sciecie:"
  826. #MSG_SHOW_END_STOPS c=17 r=1
  827. "Show end stops"
  828. "Pokaz krancowki"
  829. #MSG_DWELL c=0 r=0
  830. "Sleep..."
  831. "Sleep..."
  832. #MSG_SLIGHT_SKEW c=15 r=1
  833. "Slight skew:"
  834. "Lekkie sciecie:"
  835. #MSG_FILE_CNT c=20 r=4
  836. "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
  837. "\x00"
  838. #MSG_SORT_NONE c=17 r=1
  839. "Sort: [None]"
  840. "\x00"
  841. #MSG_SORT_TIME c=17 r=1
  842. "Sort: [Time]"
  843. "\x00"
  844. #MSG_SORT_ALPHA c=17 r=1
  845. "Sort: [Alphabet]"
  846. "\x00"
  847. #MSG_SORTING c=20 r=1
  848. "Sorting files"
  849. "\x00"
  850. #MSG_SPEED c=0 r=0
  851. "Speed"
  852. "Predkosc"
  853. #MSG_SELFTEST_FAN_YES c=19 r=0
  854. "Spinning"
  855. "Kreci sie"
  856. #MSG_TEMP_CAL_WARNING c=20 r=4
  857. "Stable ambient temperature 21-26C is needed a rigid stand is required."
  858. "\x00"
  859. #MSG_STATISTICS c=0 r=0
  860. "Statistics "
  861. "Statystyka "
  862. #MSG_STEPPER_TOO_HIGH c=0 r=0
  863. "Steprate too high: "
  864. "Steprate too high: "
  865. #MSG_STOP_PRINT c=0 r=0
  866. "Stop print"
  867. "Zatrzymac druk"
  868. #MSG_STOPPED c=0 r=0
  869. "STOPPED. "
  870. "STOPPED. "
  871. #MSG_SUPPORT c=0 r=0
  872. "Support"
  873. "Pomoc"
  874. #MSG_SELFTEST_SWAPPED c=0 r=0
  875. "Swapped"
  876. "\x00"
  877. #MSG_TEMP_CALIBRATION c=20 r=1
  878. "Temp. cal. "
  879. "Ciepl. kal. "
  880. #MSG_TEMP_CALIBRATION_ON c=20 r=1
  881. "Temp. cal. [on]"
  882. "Ciepl. kal. [ON]"
  883. #MSG_TEMP_CALIBRATION_OFF c=20 r=1
  884. "Temp. cal. [off]"
  885. "Ciepl. kal. [OFF]"
  886. #MSG_CALIBRATION_PINDA_MENU c=17 r=1
  887. "Temp. calibration"
  888. "Cieplna kalibr."
  889. #MSG_TEMP_CAL_FAILED c=20 r=8
  890. "Temperature calibration failed"
  891. "\x00"
  892. #MSG_PINDA_NOT_CALIBRATED c=20 r=4
  893. "Temperature calibration has not been run yet"
  894. "Cieplna kalibracja nie byla przeprowadzona"
  895. #MSG_TEMP_CALIBRATION_DONE c=20 r=12
  896. "Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
  897. "Cieplna kalibracja zakonczona. Kontynuuj przyciskiem"
  898. #MSG_TEMPERATURE c=0 r=0
  899. "Temperature"
  900. "Temperatura"
  901. #MSG_MENU_TEMPERATURES c=15 r=1
  902. "Temperatures"
  903. "\x00"
  904. #MSG_STATS_TOTALFILAMENT c=20 r=0
  905. "Total filament :"
  906. "Filament lacznie :"
  907. #MSG_STATS_TOTALPRINTTIME c=20 r=0
  908. "Total print time :"
  909. "Czas calkowity :"
  910. #MSG_ENDSTOP_HIT c=0 r=0
  911. "TRIGGERED"
  912. "TRIGGERED"
  913. #MSG_TUNE c=0 r=0
  914. "Tune"
  915. "Nastroic"
  916. #MSG_UNLOAD_ALL c=0 r=0
  917. "Unload all"
  918. "Wyjac wszystkie"
  919. #MSG_UNLOAD_FILAMENT_1 c=17 r=0
  920. "Unload filament 1"
  921. "Wyjac filament 1"
  922. #MSG_UNLOAD_FILAMENT_2 c=17 r=0
  923. "Unload filament 2"
  924. "Wyjac filament 2"
  925. #MSG_UNLOAD_FILAMENT_3 c=17 r=0
  926. "Unload filament 3"
  927. "Wyjac filament 3"
  928. #MSG_UNLOAD_FILAMENT_4 c=17 r=0
  929. "Unload filament 4"
  930. "Wyjac filament 4"
  931. #MSG_UNLOAD_FILAMENT c=17 r=0
  932. "Unload filament"
  933. "Wyjac filament"
  934. #MSG_UNLOADING_FILAMENT c=20 r=1
  935. "Unloading filament"
  936. "Wysuwam filament"
  937. #MSG_USED c=19 r=1
  938. "Used during print"
  939. "Uzyte przy druku"
  940. #MSG_MENU_VOLTAGES c=15 r=1
  941. "Voltages"
  942. "\x00"
  943. #MSG_SD_VOL_INIT_FAIL c=0 r=0
  944. "volume.init failed"
  945. "volume.init failed"
  946. #MSG_USERWAIT c=0 r=0
  947. "Wait for user..."
  948. "Wait for user..."
  949. #MSG_WAITING_TEMP c=20 r=3
  950. "Waiting for nozzle and bed cooling"
  951. "Oczekiwanie na wychlodzenie dyszy i podkladki."
  952. #MSG_WAITING_TEMP_PINDA c=20 r=3
  953. "Waiting for PINDA probe cooling"
  954. "\x00"
  955. #MSG_CHANGED_BOTH c=20 r=4
  956. "Warning: both printer type and motherboard type changed."
  957. "\x00"
  958. #MSG_CHANGED_MOTHERBOARD c=20 r=4
  959. "Warning: motherboard type changed."
  960. "\x00"
  961. #MSG_CHANGED_PRINTER c=20 r=4
  962. "Warning: printer type changed."
  963. "\x00"
  964. #MSG_FW_VERSION_UNKNOWN c=20 r=8
  965. "WARNING: This is an unofficial, unsupported build. Use at your own risk!"
  966. "\x00"
  967. #MSG_UNLOAD_SUCCESSFUL c=20 r=2
  968. "Was filament unload successful?"
  969. "\x00"
  970. #MSG_SELFTEST_WIRINGERROR c=0 r=0
  971. "Wiring error"
  972. "Blad polaczenia"
  973. #MSG_WIZARD c=17 r=1
  974. "Wizard"
  975. "Wizard"
  976. #MSG_SD_WORKDIR_FAIL c=0 r=0
  977. "workDir open failed"
  978. "workDir open failed"
  979. #MSG_SD_WRITE_TO_FILE c=0 r=0
  980. "Writing to file: "
  981. "Writing to file: "
  982. #MSG_XYZ_DETAILS c=19 r=1
  983. "XYZ cal. details"
  984. "Szczegoly kal.XYZ"
  985. #MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
  986. "XYZ calibration all right. Skew will be corrected automatically."
  987. "Kalibracja XYZ prawidlowa. Skosy beda automatycznie wyrownane przy druku."
  988. #MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
  989. "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
  990. "Kalibracja XYZ prawidlowa. Osie X/Y lekko skosne. Dobra robota!"
  991. #MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
  992. "XYZ calibration compromised. Front calibration points not reachable."
  993. "Kalibr. XYZ niedokladna. Przednie punkty kalibr. Zbyt wys. do przodu."
  994. #MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
  995. "XYZ calibration compromised. Left front calibration point not reachable."
  996. "Kalibracja XYZ niedokladna. Lewy przedni punkt zbyt wysuniety do przodu."
  997. #MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
  998. "XYZ calibration compromised. Right front calibration point not reachable."
  999. "Kalibracja XYZ niedokladna. Prawy przedni punkt zbyt wysuniety do przodu."
  1000. #MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=8
  1001. "XYZ calibration failed. Bed calibration point was not found."
  1002. "Kalibr. XYZ nieudana. Kalibracyjny punkt podkladki nieznaleziony."
  1003. #MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=8
  1004. "XYZ calibration failed. Front calibration points not reachable."
  1005. "Kalibr. XYZ nieudana. Przed. punkty kalibr. zbyt do przodu. Wyrownac drukarke."
  1006. #MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
  1007. "XYZ calibration failed. Left front calibration point not reachable."
  1008. "Kalibr. XYZ nieudana. Lewy przedni punkt zbyt do przodu. Wyrownac drukarke."
  1009. #MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
  1010. "XYZ calibration failed. Please consult the manual."
  1011. "Kalibracja XYZ niepowiedziona. Sprawdzic w instrukcji."
  1012. #MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=8
  1013. "XYZ calibration failed. Right front calibration point not reachable."
  1014. "Kalibr. XYZ nieudana. Prawy przedni punkt zbyt do przodu. Wyrownac drukarke."
  1015. #MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
  1016. "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
  1017. "Kalibracja XYZ ok. Osie X/Y sa prostopadle. Gratulacje!"
  1018. #MSG_Y_DISTANCE_FROM_MIN c=20 r=1
  1019. "Y distance from min:"
  1020. "Odleglosc Y od min.:"
  1021. #MSG_YES c=0 r=0
  1022. "Yes"
  1023. "Tak"
  1024. #MSG_FW_VERSION_ALPHA c=20 r=8
  1025. "You are using firmware alpha version. This is development version. Using this version is not recommended and may cause printer damage."
  1026. "\x00"
  1027. #MSG_FW_VERSION_BETA c=20 r=8
  1028. "You are using firmware beta version. This is development version. Using this version is not recommended and may cause printer damage."
  1029. "\x00"
  1030. #MSG_WIZARD_QUIT c=20 r=8
  1031. "You can always resume the Wizard from Calibration -> Wizard."
  1032. "Zawsze mozesz przywrocic Wizard przez Kalibracja -> Wizard."