messages.c 11 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141
  1. //messages.c
  2. #include "language.h"
  3. //this is because we need include Configuration_prusa.h (CUSTOM_MENDEL_NAME)
  4. #define bool char
  5. #define true 1
  6. #define false 0
  7. #include "Configuration_prusa.h"
  8. //internationalized messages
  9. const char MSG_AUTO_HOME[] PROGMEM_I1 = ISTR("Auto home"); ////
  10. const char MSG_BABYSTEP_Z[] PROGMEM_I1 = ISTR("Live adjust Z"); //// c=18
  11. const char MSG_BABYSTEP_Z_NOT_SET[] PROGMEM_I1 = ISTR("Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."); ////c=20 r=12
  12. const char MSG_BED[] PROGMEM_I1 = ISTR("Bed"); ////
  13. const char MSG_BED_DONE[] PROGMEM_I1 = ISTR("Bed done"); ////
  14. const char MSG_BED_HEATING[] PROGMEM_I1 = ISTR("Bed Heating"); ////
  15. const char MSG_BED_LEVELING_FAILED_POINT_LOW[] PROGMEM_I1 = ISTR("Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."); ////c=20 r=4
  16. const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED[] PROGMEM_I1 = ISTR("XYZ calibration failed. Please consult the manual."); ////c=20 r=8
  17. const char MSG_CALIBRATE_Z_AUTO[] PROGMEM_I1 = ISTR("Calibrating Z"); ////c=20 r=2
  18. const char MSG_CARD_MENU[] PROGMEM_I1 = ISTR("Print from SD"); ////
  19. const char MSG_CONFIRM_NOZZLE_CLEAN[] PROGMEM_I1 = ISTR("Please clean the nozzle for calibration. Click when done."); ////c=20 r=8
  20. const char MSG_COOLDOWN[] PROGMEM_I1 = ISTR("Cooldown"); ////
  21. const char MSG_CRASH_DETECTED[] PROGMEM_I1 = ISTR("Crash detected."); ////c=20 r=1
  22. const char MSG_CRASHDETECT[] PROGMEM_I1 = ISTR("Crash det."); ////
  23. const char MSG_ERROR[] PROGMEM_I1 = ISTR("ERROR:"); ////
  24. const char MSG_EXTRUDER[] PROGMEM_I1 = ISTR("Extruder"); ////c=17 r=1
  25. const char MSG_FILAMENT[] PROGMEM_I1 = ISTR("Filament"); ////c=17 r=1
  26. const char MSG_FAN_SPEED[] PROGMEM_I1 = ISTR("Fan speed"); ////c=14
  27. const char MSG_FILAMENT_CLEAN[] PROGMEM_I1 = ISTR("Filament extruding & with correct color?"); ////c=20 r=2
  28. const char MSG_FILAMENT_LOADING_T0[] PROGMEM_I1 = ISTR("Insert filament into extruder 1. Click when done."); ////c=20 r=4
  29. const char MSG_FILAMENT_LOADING_T1[] PROGMEM_I1 = ISTR("Insert filament into extruder 2. Click when done."); ////c=20 r=4
  30. const char MSG_FILAMENT_LOADING_T2[] PROGMEM_I1 = ISTR("Insert filament into extruder 3. Click when done."); ////c=20 r=4
  31. const char MSG_FILAMENT_LOADING_T3[] PROGMEM_I1 = ISTR("Insert filament into extruder 4. Click when done."); ////c=20 r=4
  32. const char MSG_FILAMENTCHANGE[] PROGMEM_I1 = ISTR("Change filament"); ////
  33. const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1[] PROGMEM_I1 = ISTR("Searching bed calibration point"); ////c=60
  34. const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2[] PROGMEM_I1 = ISTR(" of 4"); ////c=14
  35. const char MSG_FINISHING_MOVEMENTS[] PROGMEM_I1 = ISTR("Finishing movements"); ////c=20 r=1
  36. const char MSG_FOLLOW_CALIBRATION_FLOW[] PROGMEM_I1 = ISTR("Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."); ////c=20 r=8
  37. const char MSG_FOLLOW_Z_CALIBRATION_FLOW[] PROGMEM_I1 = ISTR("There is still a need to make Z calibration. Please follow the manual, chapter First steps, section Calibration flow."); ////c=20 r=8
  38. const char MSG_FSENSOR_AUTOLOAD[] PROGMEM_I1 = ISTR("F. autoload"); ////c=17 r=1
  39. const char MSG_FSENSOR[] PROGMEM_I1 = ISTR("Fil. sensor"); ////
  40. const char MSG_HEATING[] PROGMEM_I1 = ISTR("Heating"); ////
  41. const char MSG_HEATING_COMPLETE[] PROGMEM_I1 = ISTR("Heating done."); ////c=20
  42. const char MSG_HOMEYZ[] PROGMEM_I1 = ISTR("Calibrate Z"); ////
  43. const char MSG_CHOOSE_EXTRUDER[] PROGMEM_I1 = ISTR("Choose extruder:"); ////c=20 r=1
  44. const char MSG_CHOOSE_FILAMENT[] PROGMEM_I1 = ISTR("Choose filament:"); ////c=20 r=1
  45. const char MSG_LOAD_FILAMENT[] PROGMEM_I1 = ISTR("Load filament"); //// Number 1 to 5 is added behind text e.g. "Load filament 1" c=16
  46. const char MSG_LOADING_FILAMENT[] PROGMEM_I1 = ISTR("Loading filament"); ////c=20
  47. const char MSG_EJECT_FILAMENT[] PROGMEM_I1 = ISTR("Eject filament"); //// Number 1 to 5 is added behind text e.g. "Eject filament 1" c=16
  48. const char MSG_CUT_FILAMENT[] PROGMEM_I1 = ISTR("Cut filament"); //// Number 1 to 5 is added behind text e.g. "Cut filament 1" c=16
  49. const char MSG_M117_V2_CALIBRATION[] PROGMEM_I1 = ISTR("M117 First layer cal."); ////c=25 r=1
  50. const char MSG_MAIN[] PROGMEM_I1 = ISTR("Main"); ////
  51. const char MSG_BACK[] PROGMEM_I1 = ISTR("Back"); ////
  52. const char MSG_SHEET[] PROGMEM_I1 = ISTR("Sheet"); ////c=10
  53. const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1[] PROGMEM_I1 = ISTR("Measuring reference height of calibration point"); ////c=60
  54. const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2[] PROGMEM_I1 = ISTR(" of 9"); ////c=14
  55. const char MSG_MENU_CALIBRATION[] PROGMEM_I1 = ISTR("Calibration"); ////
  56. const char MSG_NO[] PROGMEM_I1 = ISTR("No"); ////
  57. const char MSG_NOZZLE[] PROGMEM_I1 = ISTR("Nozzle"); ////
  58. const char MSG_PAPER[] PROGMEM_I1 = ISTR("Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."); ////c=20 r=8
  59. const char MSG_PLACE_STEEL_SHEET[] PROGMEM_I1 = ISTR("Please place steel sheet on heatbed."); ////c=20 r=4
  60. const char MSG_PLEASE_WAIT[] PROGMEM_I1 = ISTR("Please wait"); ////c=20
  61. const char MSG_PREHEAT_NOZZLE[] PROGMEM_I1 = ISTR("Preheat the nozzle!"); ////c=20
  62. const char MSG_PRESS_TO_UNLOAD[] PROGMEM_I1 = ISTR("Please press the knob to unload filament"); ////c=20 r=4
  63. const char MSG_PRINT_ABORTED[] PROGMEM_I1 = ISTR("Print aborted"); ////c=20
  64. const char MSG_PULL_OUT_FILAMENT[] PROGMEM_I1 = ISTR("Please pull out filament immediately"); ////c=20 r=4
  65. const char MSG_RECOVER_PRINT[] PROGMEM_I1 = ISTR("Blackout occurred. Recover print?"); ////c=20 r=2
  66. const char MSG_REFRESH[] PROGMEM_I1 = ISTR("\xF8" "Refresh"); ////
  67. const char MSG_RESUMING_PRINT[] PROGMEM_I1 = ISTR("Resuming print"); ////
  68. const char MSG_REMOVE_STEEL_SHEET[] PROGMEM_I1 = ISTR("Please remove steel sheet from heatbed."); ////c=20 r=4
  69. const char MSG_SELFTEST_COOLING_FAN[] PROGMEM_I1 = ISTR("Front print fan?"); ////c=20
  70. const char MSG_SELFTEST_EXTRUDER_FAN[] PROGMEM_I1 = ISTR("Left hotend fan?"); ////c=20
  71. const char MSG_SELFTEST_FAILED[] PROGMEM_I1 = ISTR("Selftest failed "); ////c=20
  72. const char MSG_SELFTEST_FAN[] PROGMEM_I1 = ISTR("Fan test"); ////c=20
  73. const char MSG_SELFTEST_FAN_NO[] PROGMEM_I1 = ISTR("Not spinning"); ////c=19
  74. const char MSG_SELFTEST_FAN_YES[] PROGMEM_I1 = ISTR("Spinning"); ////c=19
  75. const char MSG_SELFTEST_CHECK_BED[] PROGMEM_I1 = ISTR("Checking bed "); ////c=20
  76. const char MSG_SELFTEST_CHECK_FSENSOR[] PROGMEM_I1 = ISTR("Checking sensors "); ////c=20
  77. const char MSG_SELFTEST_MOTOR[] PROGMEM_I1 = ISTR("Motor"); ////
  78. const char MSG_SELFTEST_FILAMENT_SENSOR[] PROGMEM_I1 = ISTR("Filament sensor"); ////c=17
  79. const char MSG_SELFTEST_WIRINGERROR[] PROGMEM_I1 = ISTR("Wiring error"); ////
  80. const char MSG_SETTINGS[] PROGMEM_I1 = ISTR("Settings"); ////
  81. const char MSG_HW_SETUP[] PROGMEM_I1 = ISTR("HW Setup"); ////
  82. const char MSG_MODE[] PROGMEM_I1 = ISTR("Mode"); ////
  83. const char MSG_HIGH_POWER[] PROGMEM_I1 = ISTR("High power"); ////
  84. const char MSG_AUTO_POWER[] PROGMEM_I1 = ISTR("Auto power"); ////
  85. const char MSG_SILENT[] PROGMEM_I1 = ISTR("Silent"); ////
  86. const char MSG_NORMAL[] PROGMEM_I1 = ISTR("Normal"); ////
  87. const char MSG_STEALTH[] PROGMEM_I1 = ISTR("Stealth"); ////
  88. const char MSG_STEEL_SHEET_CHECK[] PROGMEM_I1 = ISTR("Is steel sheet on heatbed?"); ////c=20 r=2
  89. const char MSG_STOP_PRINT[] PROGMEM_I1 = ISTR("Stop print"); ////
  90. const char MSG_STOPPED[] PROGMEM_I1 = ISTR("STOPPED. "); ////
  91. const char MSG_TEMP_CALIBRATION[] PROGMEM_I1 = ISTR("Temp. cal. "); ////c=20 r=1
  92. const char MSG_TEMP_CALIBRATION_DONE[] PROGMEM_I1 = ISTR("Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."); ////c=20 r=12
  93. const char MSG_UNLOAD_FILAMENT[] PROGMEM_I1 = ISTR("Unload filament"); ////c=17
  94. const char MSG_UNLOADING_FILAMENT[] PROGMEM_I1 = ISTR("Unloading filament"); ////c=20 r=1
  95. const char MSG_WATCH[] PROGMEM_I1 = ISTR("Info screen"); ////
  96. const char MSG_WIZARD_CALIBRATION_FAILED[] PROGMEM_I1 = ISTR("Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."); ////c=20 r=8
  97. const char MSG_WIZARD_DONE[] PROGMEM_I1 = ISTR("All is done. Happy printing!"); ////c=20 r=8
  98. const char MSG_WIZARD_HEATING[] PROGMEM_I1 = ISTR("Preheating nozzle. Please wait."); ////c=20 r=3
  99. const char MSG_WIZARD_QUIT[] PROGMEM_I1 = ISTR("You can always resume the Wizard from Calibration -> Wizard."); ////c=20 r=8
  100. const char MSG_YES[] PROGMEM_I1 = ISTR("Yes"); ////
  101. const char MSG_V2_CALIBRATION[] PROGMEM_I1 = ISTR("First layer cal."); ////c=17 r=1
  102. const char WELCOME_MSG[] PROGMEM_I1 = ISTR(CUSTOM_MENDEL_NAME " OK."); ////c=20
  103. const char MSG_OFF[] PROGMEM_I1 = ISTR("Off"); ////
  104. const char MSG_ON[] PROGMEM_I1 = ISTR("On"); ////
  105. const char MSG_NA[] PROGMEM_I1 = ISTR("N/A"); ////
  106. const char MSG_AUTO_DEPLETE[] PROGMEM_I1 = ISTR("SpoolJoin"); ////
  107. const char MSG_CUTTER[] PROGMEM_I1 = ISTR("Cutter"); ////
  108. const char MSG_NONE[] PROGMEM_I1 = ISTR("None"); ////
  109. const char MSG_WARN[] PROGMEM_I1 = ISTR("Warn"); ////
  110. const char MSG_STRICT[] PROGMEM_I1 = ISTR("Strict"); ////
  111. const char MSG_MODEL[] PROGMEM_I1 = ISTR("Model"); ////
  112. const char MSG_FIRMWARE[] PROGMEM_I1 = ISTR("Firmware"); ////
  113. const char MSG_GCODE[] PROGMEM_I1 = ISTR("Gcode"); ////
  114. const char MSG_NOZZLE_DIAMETER[] PROGMEM_I1 = ISTR("Nozzle d."); ////
  115. //not internationalized messages
  116. const char MSG_SD_WORKDIR_FAIL[] PROGMEM_N1 = "workDir open failed"; ////
  117. const char MSG_BROWNOUT_RESET[] PROGMEM_N1 = " Brown out Reset"; ////
  118. const char MSG_EXTERNAL_RESET[] PROGMEM_N1 = " External Reset"; ////
  119. const char MSG_FILE_SAVED[] PROGMEM_N1 = "Done saving file."; ////
  120. const char MSG_POSITION_UNKNOWN[] PROGMEM_N1 = "Home X/Y before Z"; ////
  121. const char MSG_SOFTWARE_RESET[] PROGMEM_N1 = " Software Reset"; ////
  122. const char MSG_UNKNOWN_COMMAND[] PROGMEM_N1 = "Unknown command: \""; ////
  123. const char MSG_WATCHDOG_RESET[] PROGMEM_N1 = " Watchdog Reset"; ////
  124. const char MSG_Z_MAX[] PROGMEM_N1 = "z_max: "; ////
  125. const char MSG_Z_MIN[] PROGMEM_N1 = "z_min: "; ////
  126. const char MSG_ZPROBE_OUT[] PROGMEM_N1 = "Z probe out. bed"; ////
  127. const char MSG_ZPROBE_ZOFFSET[] PROGMEM_N1 = "Z Offset"; ////
  128. const char MSG_TMC_OVERTEMP[] PROGMEM_N1 = "TMC DRIVER OVERTEMP"; ////
  129. const char MSG_Enqueing[] PROGMEM_N1 = "enqueing \""; ////
  130. const char MSG_ENDSTOPS_HIT[] PROGMEM_N1 = "endstops hit: "; ////
  131. const char MSG_SD_ERR_WRITE_TO_FILE[] PROGMEM_N1 = "error writing to file"; ////
  132. const char MSG_OK[] PROGMEM_N1 = "ok"; ////
  133. const char MSG_SD_OPEN_FILE_FAIL[] PROGMEM_N1 = "open failed, File: "; ////
  134. const char MSG_ENDSTOP_OPEN[] PROGMEM_N1 = "open"; ////
  135. const char MSG_POWERUP[] PROGMEM_N1 = "PowerUp"; ////
  136. const char MSG_ERR_STOPPED[] PROGMEM_N1 = "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"; ////
  137. const char MSG_ENDSTOP_HIT[] PROGMEM_N1 = "TRIGGERED"; ////
  138. const char MSG_OCTOPRINT_PAUSE[] PROGMEM_N1 = "// action:pause"; ////