ultralcd_implementation_hitachi_HD44780.h 42 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448
  1. #ifndef ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
  2. #define ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
  3. int scrollstuff = 0;
  4. char longFilenameOLD[LONG_FILENAME_LENGTH];
  5. #include "Configuration_prusa.h"
  6. #include "Marlin.h"
  7. /**
  8. * Implementation of the LCD display routines for a Hitachi HD44780 display. These are common LCD character displays.
  9. * When selecting the Russian language, a slightly different LCD implementation is used to handle UTF8 characters.
  10. **/
  11. #ifndef REPRAPWORLD_KEYPAD
  12. extern volatile uint8_t buttons; //the last checked buttons in a bit array.
  13. #else
  14. extern volatile uint16_t buttons; //an extended version of the last checked buttons in a bit array.
  15. #endif
  16. ////////////////////////////////////
  17. // Setup button and encode mappings for each panel (into 'buttons' variable
  18. //
  19. // This is just to map common functions (across different panels) onto the same
  20. // macro name. The mapping is independent of whether the button is directly connected or
  21. // via a shift/i2c register.
  22. #ifdef ULTIPANEL
  23. // All UltiPanels might have an encoder - so this is always be mapped onto first two bits
  24. #define BLEN_B 1
  25. #define BLEN_A 0
  26. #define EN_B (1<<BLEN_B) // The two encoder pins are connected through BTN_EN1 and BTN_EN2
  27. #define EN_A (1<<BLEN_A)
  28. #if defined(BTN_ENC) && BTN_ENC > -1
  29. // encoder click is directly connected
  30. #define BLEN_C 2
  31. #define EN_C (1<<BLEN_C)
  32. #endif
  33. //
  34. // Setup other button mappings of each panel
  35. //
  36. #if defined(LCD_I2C_VIKI)
  37. #define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
  38. // button and encoder bit positions within 'buttons'
  39. #define B_LE (BUTTON_LEFT<<B_I2C_BTN_OFFSET) // The remaining normalized buttons are all read via I2C
  40. #define B_UP (BUTTON_UP<<B_I2C_BTN_OFFSET)
  41. #define B_MI (BUTTON_SELECT<<B_I2C_BTN_OFFSET)
  42. #define B_DW (BUTTON_DOWN<<B_I2C_BTN_OFFSET)
  43. #define B_RI (BUTTON_RIGHT<<B_I2C_BTN_OFFSET)
  44. #if defined(BTN_ENC) && BTN_ENC > -1
  45. // the pause/stop/restart button is connected to BTN_ENC when used
  46. #define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name
  47. #define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop.
  48. #else
  49. #define LCD_CLICKED (buttons&(B_MI|B_RI))
  50. #endif
  51. // I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
  52. #define LCD_HAS_SLOW_BUTTONS
  53. #elif defined(LCD_I2C_PANELOLU2)
  54. // encoder click can be read through I2C if not directly connected
  55. #if BTN_ENC <= 0
  56. #define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
  57. #define B_MI (PANELOLU2_ENCODER_C<<B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later
  58. #define LCD_CLICKED (buttons&B_MI)
  59. // I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
  60. #define LCD_HAS_SLOW_BUTTONS
  61. #else
  62. #define LCD_CLICKED (buttons&EN_C)
  63. #endif
  64. #elif defined(REPRAPWORLD_KEYPAD)
  65. // define register bit values, don't change it
  66. #define BLEN_REPRAPWORLD_KEYPAD_F3 0
  67. #define BLEN_REPRAPWORLD_KEYPAD_F2 1
  68. #define BLEN_REPRAPWORLD_KEYPAD_F1 2
  69. #define BLEN_REPRAPWORLD_KEYPAD_UP 3
  70. #define BLEN_REPRAPWORLD_KEYPAD_RIGHT 4
  71. #define BLEN_REPRAPWORLD_KEYPAD_MIDDLE 5
  72. #define BLEN_REPRAPWORLD_KEYPAD_DOWN 6
  73. #define BLEN_REPRAPWORLD_KEYPAD_LEFT 7
  74. #define REPRAPWORLD_BTN_OFFSET 3 // bit offset into buttons for shift register values
  75. #define EN_REPRAPWORLD_KEYPAD_F3 (1<<(BLEN_REPRAPWORLD_KEYPAD_F3+REPRAPWORLD_BTN_OFFSET))
  76. #define EN_REPRAPWORLD_KEYPAD_F2 (1<<(BLEN_REPRAPWORLD_KEYPAD_F2+REPRAPWORLD_BTN_OFFSET))
  77. #define EN_REPRAPWORLD_KEYPAD_F1 (1<<(BLEN_REPRAPWORLD_KEYPAD_F1+REPRAPWORLD_BTN_OFFSET))
  78. #define EN_REPRAPWORLD_KEYPAD_UP (1<<(BLEN_REPRAPWORLD_KEYPAD_UP+REPRAPWORLD_BTN_OFFSET))
  79. #define EN_REPRAPWORLD_KEYPAD_RIGHT (1<<(BLEN_REPRAPWORLD_KEYPAD_RIGHT+REPRAPWORLD_BTN_OFFSET))
  80. #define EN_REPRAPWORLD_KEYPAD_MIDDLE (1<<(BLEN_REPRAPWORLD_KEYPAD_MIDDLE+REPRAPWORLD_BTN_OFFSET))
  81. #define EN_REPRAPWORLD_KEYPAD_DOWN (1<<(BLEN_REPRAPWORLD_KEYPAD_DOWN+REPRAPWORLD_BTN_OFFSET))
  82. #define EN_REPRAPWORLD_KEYPAD_LEFT (1<<(BLEN_REPRAPWORLD_KEYPAD_LEFT+REPRAPWORLD_BTN_OFFSET))
  83. #define LCD_CLICKED ((buttons&EN_C) || (buttons&EN_REPRAPWORLD_KEYPAD_F1))
  84. #define REPRAPWORLD_KEYPAD_MOVE_Y_DOWN (buttons&EN_REPRAPWORLD_KEYPAD_DOWN)
  85. #define REPRAPWORLD_KEYPAD_MOVE_Y_UP (buttons&EN_REPRAPWORLD_KEYPAD_UP)
  86. #define REPRAPWORLD_KEYPAD_MOVE_HOME (buttons&EN_REPRAPWORLD_KEYPAD_MIDDLE)
  87. #elif defined(NEWPANEL)
  88. #define LCD_CLICKED (buttons&EN_C)
  89. #else // old style ULTIPANEL
  90. //bits in the shift register that carry the buttons for:
  91. // left up center down right red(stop)
  92. #define BL_LE 7
  93. #define BL_UP 6
  94. #define BL_MI 5
  95. #define BL_DW 4
  96. #define BL_RI 3
  97. #define BL_ST 2
  98. //automatic, do not change
  99. #define B_LE (1<<BL_LE)
  100. #define B_UP (1<<BL_UP)
  101. #define B_MI (1<<BL_MI)
  102. #define B_DW (1<<BL_DW)
  103. #define B_RI (1<<BL_RI)
  104. #define B_ST (1<<BL_ST)
  105. #define LCD_CLICKED (buttons&(B_MI|B_ST))
  106. #endif
  107. ////////////////////////
  108. // Setup Rotary Encoder Bit Values (for two pin encoders to indicate movement)
  109. // These values are independent of which pins are used for EN_A and EN_B indications
  110. // The rotary encoder part is also independent to the chipset used for the LCD
  111. #if defined(EN_A) && defined(EN_B)
  112. #define encrot0 0
  113. #define encrot1 2
  114. #define encrot2 3
  115. #define encrot3 1
  116. #endif
  117. #endif //ULTIPANEL
  118. ////////////////////////////////////
  119. // Create LCD class instance and chipset-specific information
  120. #if defined(LCD_I2C_TYPE_PCF8575)
  121. // note: these are register mapped pins on the PCF8575 controller not Arduino pins
  122. #define LCD_I2C_PIN_BL 3
  123. #define LCD_I2C_PIN_EN 2
  124. #define LCD_I2C_PIN_RW 1
  125. #define LCD_I2C_PIN_RS 0
  126. #define LCD_I2C_PIN_D4 4
  127. #define LCD_I2C_PIN_D5 5
  128. #define LCD_I2C_PIN_D6 6
  129. #define LCD_I2C_PIN_D7 7
  130. #include <Wire.h>
  131. #include <LCD.h>
  132. #include <LiquidCrystal_I2C.h>
  133. #define LCD_CLASS LiquidCrystal_I2C
  134. LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7);
  135. #elif defined(LCD_I2C_TYPE_MCP23017)
  136. //for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators())
  137. #define LED_A 0x04 //100
  138. #define LED_B 0x02 //010
  139. #define LED_C 0x01 //001
  140. #define LCD_HAS_STATUS_INDICATORS
  141. #include <Wire.h>
  142. #include <LiquidTWI2.h>
  143. #define LCD_CLASS LiquidTWI2
  144. #if defined(DETECT_DEVICE)
  145. LCD_CLASS lcd(LCD_I2C_ADDRESS, 1);
  146. #else
  147. LCD_CLASS lcd(LCD_I2C_ADDRESS);
  148. #endif
  149. #elif defined(LCD_I2C_TYPE_MCP23008)
  150. #include <Wire.h>
  151. #include <LiquidTWI2.h>
  152. #define LCD_CLASS LiquidTWI2
  153. #if defined(DETECT_DEVICE)
  154. LCD_CLASS lcd(LCD_I2C_ADDRESS, 1);
  155. #else
  156. LCD_CLASS lcd(LCD_I2C_ADDRESS);
  157. #endif
  158. #elif defined(LCD_I2C_TYPE_PCA8574)
  159. #include <LiquidCrystal_I2C.h>
  160. #define LCD_CLASS LiquidCrystal_I2C
  161. LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_WIDTH, LCD_HEIGHT);
  162. // 2 wire Non-latching LCD SR from:
  163. // https://bitbucket.org/fmalpartida/new-LiquidCrystal/wiki/schematics#!shiftregister-connection
  164. #elif defined(SR_LCD_2W_NL)
  165. extern "C" void __cxa_pure_virtual() { while (1); }
  166. #include <LCD.h>
  167. #include <LiquidCrystal_SR.h>
  168. #define LCD_CLASS LiquidCrystal_SR
  169. LCD_CLASS lcd(SR_DATA_PIN, SR_CLK_PIN);
  170. #else
  171. // Standard directly connected LCD implementations
  172. #ifdef LANGUAGE_RU
  173. #include "LiquidCrystal_Rus.h"
  174. #define LCD_CLASS LiquidCrystal_Rus
  175. #else
  176. #include "LiquidCrystal_Prusa.h"
  177. #define LCD_CLASS LiquidCrystal_Prusa
  178. #endif
  179. LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
  180. #endif
  181. #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
  182. static uint16_t progressBarTick = 0;
  183. #if PROGRESS_MSG_EXPIRE > 0
  184. static uint16_t messageTick = 0;
  185. #endif
  186. #define LCD_STR_PROGRESS "\x03\x04\x05"
  187. #endif
  188. /* Custom characters defined in the first 8 characters of the LCD */
  189. #define LCD_STR_BEDTEMP "\x00"
  190. #define LCD_STR_DEGREE "\x01"
  191. #define LCD_STR_THERMOMETER "\x02"
  192. #define LCD_STR_UPLEVEL "\x03"
  193. #define LCD_STR_REFRESH "\x04"
  194. #define LCD_STR_FOLDER "\x05"
  195. #define LCD_STR_FEEDRATE "\x06"
  196. #define LCD_STR_CLOCK "\x07"
  197. #define LCD_STR_ARROW_UP "\x0B"
  198. #define LCD_STR_ARROW_DOWN "\x01"
  199. #define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */
  200. static void lcd_set_custom_characters(
  201. #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
  202. bool progress_bar_set=true
  203. #endif
  204. ) {
  205. byte bedTemp[8] = {
  206. B00000,
  207. B11111,
  208. B10101,
  209. B10001,
  210. B10101,
  211. B11111,
  212. B00000,
  213. B00000
  214. }; //thanks Sonny Mounicou
  215. byte degree[8] = {
  216. B01100,
  217. B10010,
  218. B10010,
  219. B01100,
  220. B00000,
  221. B00000,
  222. B00000,
  223. B00000
  224. };
  225. byte thermometer[8] = {
  226. B00100,
  227. B01010,
  228. B01010,
  229. B01010,
  230. B01010,
  231. B10001,
  232. B10001,
  233. B01110
  234. };
  235. byte uplevel[8] = {
  236. B00100,
  237. B01110,
  238. B11111,
  239. B00100,
  240. B11100,
  241. B00000,
  242. B00000,
  243. B00000
  244. }; //thanks joris
  245. byte refresh[8] = {
  246. B00000,
  247. B00110,
  248. B11001,
  249. B11000,
  250. B00011,
  251. B10011,
  252. B01100,
  253. B00000,
  254. }; //thanks joris
  255. byte folder[8] = {
  256. B00000,
  257. B11100,
  258. B11111,
  259. B10001,
  260. B10001,
  261. B11111,
  262. B00000,
  263. B00000
  264. }; //thanks joris
  265. #ifdef LANGUAGE_EN_H
  266. byte feedrate[8] = {
  267. B11100,
  268. B10000,
  269. B11000,
  270. B10111,
  271. B00101,
  272. B00110,
  273. B00101,
  274. B00000
  275. }; //thanks Sonny Mounicou
  276. #else
  277. /*
  278. byte feedrate[8] = {
  279. B11100,
  280. B10100,
  281. B11000,
  282. B10100,
  283. B00000,
  284. B00111,
  285. B00010,
  286. B00010
  287. };
  288. */
  289. /*
  290. byte feedrate[8] = {
  291. B01100,
  292. B10011,
  293. B00000,
  294. B01100,
  295. B10011,
  296. B00000,
  297. B01100,
  298. B10011
  299. };
  300. */
  301. byte feedrate[8] = {
  302. B00000,
  303. B00100,
  304. B10010,
  305. B01001,
  306. B10010,
  307. B00100,
  308. B00000,
  309. B00000
  310. };
  311. #endif
  312. byte clock[8] = {
  313. B00000,
  314. B01110,
  315. B10011,
  316. B10101,
  317. B10001,
  318. B01110,
  319. B00000,
  320. B00000
  321. }; //thanks Sonny Mounicou
  322. byte arrup[8] = {
  323. B00100,
  324. B01110,
  325. B11111,
  326. B00000,
  327. B00000,
  328. B00000,
  329. B00000,
  330. B00000
  331. };
  332. byte arrdown[8] = {
  333. B00000,
  334. B00000,
  335. B00000,
  336. B00000,
  337. B00000,
  338. B10001,
  339. B01010,
  340. B00100
  341. };
  342. #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
  343. static bool char_mode = false;
  344. byte progress[3][8] = { {
  345. B00000,
  346. B10000,
  347. B10000,
  348. B10000,
  349. B10000,
  350. B10000,
  351. B10000,
  352. B00000
  353. }, {
  354. B00000,
  355. B10100,
  356. B10100,
  357. B10100,
  358. B10100,
  359. B10100,
  360. B10100,
  361. B00000
  362. }, {
  363. B00000,
  364. B10101,
  365. B10101,
  366. B10101,
  367. B10101,
  368. B10101,
  369. B10101,
  370. B00000
  371. } };
  372. if (progress_bar_set != char_mode) {
  373. char_mode = progress_bar_set;
  374. lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
  375. lcd.createChar(LCD_STR_DEGREE[0], degree);
  376. lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
  377. lcd.createChar(LCD_STR_FEEDRATE[0], feedrate);
  378. lcd.createChar(LCD_STR_CLOCK[0], clock);
  379. if (progress_bar_set) {
  380. // Progress bar characters for info screen
  381. for (int i=3; i--;) lcd.createChar(LCD_STR_PROGRESS[i], progress[i]);
  382. }
  383. else {
  384. // Custom characters for submenus
  385. lcd.createChar(LCD_STR_UPLEVEL[0], uplevel);
  386. lcd.createChar(LCD_STR_REFRESH[0], refresh);
  387. lcd.createChar(LCD_STR_FOLDER[0], folder);
  388. }
  389. }
  390. #else
  391. lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
  392. lcd.createChar(LCD_STR_DEGREE[0], degree);
  393. lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
  394. lcd.createChar(LCD_STR_UPLEVEL[0], uplevel);
  395. lcd.createChar(LCD_STR_REFRESH[0], refresh);
  396. lcd.createChar(LCD_STR_FOLDER[0], folder);
  397. lcd.createChar(LCD_STR_FEEDRATE[0], feedrate);
  398. lcd.createChar(LCD_STR_CLOCK[0], clock);
  399. //lcd.createChar(LCD_STR_ARROW_UP[0], arrup);
  400. //lcd.createChar(LCD_STR_ARROW_DOWN[0], arrdown);
  401. #endif
  402. }
  403. void lcd_set_custom_characters_arrows()
  404. {
  405. byte arrdown[8] = {
  406. B00000,
  407. B00000,
  408. B00000,
  409. B00000,
  410. B00000,
  411. B10001,
  412. B01010,
  413. B00100
  414. };
  415. lcd.createChar(1, arrdown);
  416. }
  417. void lcd_set_custom_characters_progress()
  418. {
  419. byte progress[8] = {
  420. B11111,
  421. B11111,
  422. B11111,
  423. B11111,
  424. B11111,
  425. B11111,
  426. B11111,
  427. B11111,
  428. };
  429. lcd.createChar(1, progress);
  430. }
  431. void lcd_set_custom_characters_nextpage()
  432. {
  433. byte arrdown[8] = {
  434. B00000,
  435. B00000,
  436. B10001,
  437. B01010,
  438. B00100,
  439. B10001,
  440. B01010,
  441. B00100
  442. };
  443. byte confirm[8] = {
  444. B00000,
  445. B00001,
  446. B00011,
  447. B10110,
  448. B11100,
  449. B01000,
  450. B00000
  451. };
  452. lcd.createChar(1, arrdown);
  453. lcd.createChar(2, confirm);
  454. }
  455. void lcd_set_custom_characters_degree()
  456. {
  457. byte degree[8] = {
  458. B01100,
  459. B10010,
  460. B10010,
  461. B01100,
  462. B00000,
  463. B00000,
  464. B00000,
  465. B00000
  466. };
  467. lcd.createChar(1, degree);
  468. }
  469. static void lcd_implementation_init(
  470. #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
  471. bool progress_bar_set=true
  472. #endif
  473. ) {
  474. #if defined(LCD_I2C_TYPE_PCF8575)
  475. lcd.begin(LCD_WIDTH, LCD_HEIGHT);
  476. #ifdef LCD_I2C_PIN_BL
  477. lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE);
  478. lcd.setBacklight(HIGH);
  479. #endif
  480. #elif defined(LCD_I2C_TYPE_MCP23017)
  481. lcd.setMCPType(LTI_TYPE_MCP23017);
  482. lcd.begin(LCD_WIDTH, LCD_HEIGHT);
  483. lcd.setBacklight(0); //set all the LEDs off to begin with
  484. #elif defined(LCD_I2C_TYPE_MCP23008)
  485. lcd.setMCPType(LTI_TYPE_MCP23008);
  486. lcd.begin(LCD_WIDTH, LCD_HEIGHT);
  487. #elif defined(LCD_I2C_TYPE_PCA8574)
  488. lcd.init();
  489. lcd.backlight();
  490. #else
  491. lcd.begin(LCD_WIDTH, LCD_HEIGHT);
  492. #endif
  493. lcd_set_custom_characters(
  494. #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
  495. progress_bar_set
  496. #endif
  497. );
  498. lcd.clear();
  499. }
  500. static void lcd_implementation_init_noclear(
  501. #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
  502. bool progress_bar_set=true
  503. #endif
  504. ) {
  505. #if defined(LCD_I2C_TYPE_PCF8575)
  506. lcd.begin_noclear(LCD_WIDTH, LCD_HEIGHT);
  507. #ifdef LCD_I2C_PIN_BL
  508. lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE);
  509. lcd.setBacklight(HIGH);
  510. #endif
  511. #elif defined(LCD_I2C_TYPE_MCP23017)
  512. lcd.setMCPType(LTI_TYPE_MCP23017);
  513. lcd.begin_noclear(LCD_WIDTH, LCD_HEIGHT);
  514. lcd.setBacklight(0); //set all the LEDs off to begin with
  515. #elif defined(LCD_I2C_TYPE_MCP23008)
  516. lcd.setMCPType(LTI_TYPE_MCP23008);
  517. lcd.begin_noclear(LCD_WIDTH, LCD_HEIGHT);
  518. #elif defined(LCD_I2C_TYPE_PCA8574)
  519. lcd.init();
  520. lcd.backlight();
  521. #else
  522. lcd.begin_noclear(LCD_WIDTH, LCD_HEIGHT);
  523. #endif
  524. lcd_set_custom_characters(
  525. #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
  526. progress_bar_set
  527. #endif
  528. );
  529. }
  530. static void lcd_implementation_nodisplay()
  531. {
  532. lcd.noDisplay();
  533. }
  534. static void lcd_implementation_display()
  535. {
  536. lcd.display();
  537. }
  538. void lcd_implementation_clear()
  539. {
  540. lcd.clear();
  541. }
  542. /* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
  543. void lcd_printPGM(const char* str)
  544. {
  545. char c;
  546. while((c = pgm_read_byte(str++)) != '\0')
  547. {
  548. lcd.write(c);
  549. }
  550. }
  551. void lcd_print_at_PGM(uint8_t x, uint8_t y, const char* str)
  552. {
  553. lcd.setCursor(x, y);
  554. char c;
  555. while((c = pgm_read_byte(str++)) != '\0')
  556. {
  557. lcd.write(c);
  558. }
  559. }
  560. void lcd_implementation_write(char c)
  561. {
  562. lcd.write(c);
  563. }
  564. void lcd_implementation_print(int8_t i)
  565. {
  566. lcd.print(i);
  567. }
  568. void lcd_implementation_print_at(uint8_t x, uint8_t y, int8_t i)
  569. {
  570. lcd.setCursor(x, y);
  571. lcd.print(i);
  572. }
  573. void lcd_implementation_print(int i)
  574. {
  575. lcd.print(i);
  576. }
  577. void lcd_implementation_print_at(uint8_t x, uint8_t y, int i)
  578. {
  579. lcd.setCursor(x, y);
  580. lcd.print(i);
  581. }
  582. void lcd_implementation_print(float f)
  583. {
  584. lcd.print(f);
  585. }
  586. void lcd_implementation_print(const char *str)
  587. {
  588. lcd.print(str);
  589. }
  590. void lcd_implementation_print_at(uint8_t x, uint8_t y, const char *str)
  591. {
  592. lcd.setCursor(x, y);
  593. lcd.print(str);
  594. }
  595. static inline void lcd_print_percent_done() {
  596. if (is_usb_printing)
  597. {
  598. lcd_printPGM(PSTR("USB"));
  599. }
  600. else if(IS_SD_PRINTING)
  601. {
  602. lcd_printPGM(PSTR("SD"));
  603. }
  604. else
  605. {
  606. lcd_printPGM(PSTR(" "));
  607. }
  608. if (IS_SD_PRINTING || (PRINTER_ACTIVE && (print_percent_done_normal != PRINT_PERCENT_DONE_INIT)))
  609. {
  610. lcd.print(itostr3(print_percent_done()));
  611. }
  612. else
  613. {
  614. lcd_printPGM(PSTR("---"));
  615. }
  616. lcd_printPGM(PSTR("% "));
  617. }
  618. static inline void lcd_print_time() {
  619. //if remaining print time estimation is available print it else print elapsed time
  620. //uses 8 characters
  621. uint16_t print_t = 0;
  622. if (print_time_remaining_normal != PRINT_TIME_REMAINING_INIT){
  623. print_t = print_time_remaining();
  624. }
  625. else if(starttime != 0){
  626. print_t = millis() / 60000 - starttime / 60000;
  627. }
  628. lcd.print(LCD_STR_CLOCK[0]);
  629. if((PRINTER_ACTIVE) && ((print_time_remaining_normal != PRINT_TIME_REMAINING_INIT)||(starttime != 0)))
  630. {
  631. lcd.print(itostr2(print_t/60));
  632. lcd.print(':');
  633. lcd.print(itostr2(print_t%60));
  634. if (print_time_remaining_normal != PRINT_TIME_REMAINING_INIT)
  635. {
  636. lcd.print('R');
  637. (feedmultiply == 100) ? lcd.print(' ') : lcd.print('?');
  638. }
  639. else {
  640. lcd_printPGM(PSTR(" "));
  641. }
  642. }else{
  643. lcd_printPGM(PSTR("--:-- "));
  644. }
  645. }
  646. /*
  647. 20x4 |01234567890123456789|
  648. |T 000/000D Z000.0 |
  649. |B 000/000D F100% |
  650. |SD100% T--:-- |
  651. |Status line.........|
  652. */
  653. static void lcd_implementation_status_screen()
  654. {
  655. int tHotend=int(degHotend(0) + 0.5);
  656. int tTarget=int(degTargetHotend(0) + 0.5);
  657. //Print the hotend temperature
  658. lcd.setCursor(0, 0);
  659. lcd.print(LCD_STR_THERMOMETER[0]);
  660. lcd.print(itostr3(tHotend));
  661. lcd.print('/');
  662. lcd.print(itostr3left(tTarget));
  663. lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
  664. lcd_printPGM(PSTR(" "));
  665. //Print the Z coordinates
  666. lcd.setCursor(LCD_WIDTH - 8-2, 0);
  667. #if 1
  668. lcd_printPGM(PSTR(" Z"));
  669. if (custom_message_type == 1) {
  670. // In a bed calibration mode.
  671. lcd_printPGM(PSTR(" --- "));
  672. } else {
  673. lcd.print(ftostr32sp(current_position[Z_AXIS] + 0.00001));
  674. lcd.print(' ');
  675. }
  676. #else
  677. lcd_printPGM(PSTR(" Queue:"));
  678. lcd.print(int(moves_planned()));
  679. lcd.print(' ');
  680. #endif
  681. //Print the Bedtemperature
  682. lcd.setCursor(0, 1);
  683. tHotend=int(degBed() + 0.5);
  684. tTarget=int(degTargetBed() + 0.5);
  685. lcd.print(LCD_STR_BEDTEMP[0]);
  686. lcd.print(itostr3(tHotend));
  687. lcd.print('/');
  688. lcd.print(itostr3left(tTarget));
  689. lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
  690. lcd_printPGM(PSTR(" "));
  691. #ifdef PLANNER_DIAGNOSTICS
  692. //Print Feedrate
  693. lcd.setCursor(LCD_WIDTH - 8-2, 1);
  694. lcd.print(LCD_STR_FEEDRATE[0]);
  695. lcd.print(itostr3(feedmultiply));
  696. lcd_printPGM(PSTR("% Q"));
  697. {
  698. uint8_t queue = planner_queue_min();
  699. if (queue < (BLOCK_BUFFER_SIZE >> 1)) {
  700. lcd.write('!');
  701. } else {
  702. lcd.write((char)(queue / 10) + '0');
  703. queue %= 10;
  704. }
  705. lcd.write((char)queue + '0');
  706. planner_queue_min_reset();
  707. }
  708. #else /* PLANNER_DIAGNOSTICS */
  709. //Print Feedrate
  710. lcd.setCursor(LCD_WIDTH - 8-2, 1);
  711. lcd_printPGM(PSTR(" "));
  712. lcd.print(LCD_STR_FEEDRATE[0]);
  713. lcd.print(itostr3(feedmultiply));
  714. lcd_printPGM(PSTR("% "));
  715. #endif /* PLANNER_DIAGNOSTICS */
  716. bool print_sd_status = true;
  717. #ifdef PINDA_THERMISTOR
  718. // if (farm_mode && (custom_message_type == 4))
  719. if (false)
  720. {
  721. lcd.setCursor(0, 2);
  722. lcd_printPGM(PSTR("P"));
  723. lcd.print(ftostr3(current_temperature_pinda));
  724. lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
  725. print_sd_status = false;
  726. }
  727. #endif //PINDA_THERMISTOR
  728. if (print_sd_status)
  729. {
  730. //Print SD status
  731. lcd.setCursor(0, 2);
  732. lcd_print_percent_done();
  733. }
  734. // Farm number display
  735. if (farm_mode)
  736. {
  737. lcd.setCursor(6, 2);
  738. lcd_printPGM(PSTR(" F"));
  739. lcd.print(farm_no);
  740. lcd_printPGM(PSTR(" "));
  741. // Beat display
  742. lcd.setCursor(LCD_WIDTH - 1, 0);
  743. if ( (millis() - kicktime) < 60000 ) {
  744. lcd_printPGM(PSTR("L"));
  745. }else{
  746. lcd_printPGM(PSTR(" "));
  747. }
  748. }
  749. else {
  750. #ifdef SNMM
  751. lcd_printPGM(PSTR(" E"));
  752. lcd.print(get_ext_nr() + 1);
  753. #else
  754. lcd.setCursor(LCD_WIDTH - 8 - 2, 2);
  755. lcd_printPGM(PSTR(" "));
  756. #endif
  757. }
  758. #ifdef CMD_DIAGNOSTICS
  759. lcd.setCursor(LCD_WIDTH - 8 -1, 2);
  760. lcd_printPGM(PSTR(" C"));
  761. lcd.print(buflen); // number of commands in cmd buffer
  762. if (buflen < 9) lcd_printPGM(" ");
  763. #else
  764. //Print time
  765. lcd.setCursor(LCD_WIDTH - 8, 2);
  766. lcd_print_time();
  767. #endif //CMD_DIAGNOSTICS
  768. #ifdef DEBUG_DISABLE_LCD_STATUS_LINE
  769. return;
  770. #endif //DEBUG_DISABLE_LCD_STATUS_LINE
  771. //Print status line
  772. lcd.setCursor(0, 3);
  773. // If heating in progress, set flag
  774. if (heating_status != 0) { custom_message = true; }
  775. if (IS_SD_PRINTING) {
  776. if (strcmp(longFilenameOLD, card.longFilename) != 0)
  777. {
  778. memset(longFilenameOLD, '\0', strlen(longFilenameOLD));
  779. sprintf_P(longFilenameOLD, PSTR("%s"), card.longFilename);
  780. scrollstuff = 0;
  781. }
  782. }
  783. // If printing from SD, show what we are printing
  784. if ((IS_SD_PRINTING) && !custom_message
  785. #ifdef DEBUG_BUILD
  786. && lcd_status_message[0] == 0
  787. #endif /* DEBUG_BUILD */
  788. )
  789. {
  790. if(strlen(card.longFilename) > LCD_WIDTH)
  791. {
  792. int inters = 0;
  793. int gh = scrollstuff;
  794. while (((gh - scrollstuff) < LCD_WIDTH) && (inters == 0))
  795. {
  796. if (card.longFilename[gh] == '\0')
  797. {
  798. lcd.setCursor(gh - scrollstuff, 3);
  799. lcd.print(card.longFilename[gh - 1]);
  800. scrollstuff = 0;
  801. gh = scrollstuff;
  802. inters = 1;
  803. }
  804. else
  805. {
  806. lcd.setCursor(gh - scrollstuff, 3);
  807. lcd.print(card.longFilename[gh - 1]);
  808. gh++;
  809. }
  810. }
  811. scrollstuff++;
  812. }
  813. else
  814. {
  815. lcd.print(longFilenameOLD);
  816. }
  817. }
  818. // If not, check for other special events
  819. else
  820. {
  821. if (custom_message)
  822. {
  823. // If heating flag, show progress of heating.
  824. if (heating_status != 0)
  825. {
  826. heating_status_counter++;
  827. if (heating_status_counter > 13)
  828. {
  829. heating_status_counter = 0;
  830. }
  831. lcd.setCursor(7, 3);
  832. lcd_printPGM(PSTR(" "));
  833. for (int dots = 0; dots < heating_status_counter; dots++)
  834. {
  835. lcd.setCursor(7 + dots, 3);
  836. lcd.print('.');
  837. }
  838. switch (heating_status)
  839. {
  840. case 1:
  841. lcd.setCursor(0, 3);
  842. lcd_printPGM(_T(MSG_HEATING));
  843. break;
  844. case 2:
  845. lcd.setCursor(0, 3);
  846. lcd_printPGM(_T(MSG_HEATING_COMPLETE));
  847. heating_status = 0;
  848. heating_status_counter = 0;
  849. custom_message = false;
  850. break;
  851. case 3:
  852. lcd.setCursor(0, 3);
  853. lcd_printPGM(_T(MSG_BED_HEATING));
  854. break;
  855. case 4:
  856. lcd.setCursor(0, 3);
  857. lcd_printPGM(_T(MSG_BED_DONE));
  858. heating_status = 0;
  859. heating_status_counter = 0;
  860. custom_message = false;
  861. break;
  862. default:
  863. break;
  864. }
  865. }
  866. // If mesh bed leveling in progress, show the status
  867. if (custom_message_type == 1)
  868. {
  869. if (custom_message_state > 10)
  870. {
  871. lcd.setCursor(0, 3);
  872. lcd_printPGM(PSTR(" "));
  873. lcd.setCursor(0, 3);
  874. lcd_printPGM(_T(MSG_CALIBRATE_Z_AUTO));
  875. lcd_printPGM(PSTR(" : "));
  876. lcd.print(custom_message_state-10);
  877. }
  878. else
  879. {
  880. if (custom_message_state == 3)
  881. {
  882. lcd_printPGM(_T(WELCOME_MSG));
  883. lcd_setstatuspgm(_T(WELCOME_MSG));
  884. custom_message = false;
  885. custom_message_type = 0;
  886. }
  887. if (custom_message_state > 3 && custom_message_state <= 10 )
  888. {
  889. lcd.setCursor(0, 3);
  890. lcd_printPGM(PSTR(" "));
  891. lcd.setCursor(0, 3);
  892. lcd_printPGM(_i("Calibration done"));////MSG_HOMEYZ_DONE c=0 r=0
  893. custom_message_state--;
  894. }
  895. }
  896. }
  897. // If loading filament, print status
  898. if (custom_message_type == 2)
  899. {
  900. lcd.print(lcd_status_message);
  901. }
  902. // PID tuning in progress
  903. if (custom_message_type == 3) {
  904. lcd.print(lcd_status_message);
  905. if (pid_cycle <= pid_number_of_cycles && custom_message_state > 0) {
  906. lcd.setCursor(10, 3);
  907. lcd.print(itostr3(pid_cycle));
  908. lcd.print('/');
  909. lcd.print(itostr3left(pid_number_of_cycles));
  910. }
  911. }
  912. // PINDA temp calibration in progress
  913. if (custom_message_type == 4) {
  914. char progress[4];
  915. lcd.setCursor(0, 3);
  916. lcd_printPGM(_T(MSG_TEMP_CALIBRATION));
  917. lcd.setCursor(12, 3);
  918. sprintf(progress, "%d/6", custom_message_state);
  919. lcd.print(progress);
  920. }
  921. // temp compensation preheat
  922. if (custom_message_type == 5) {
  923. lcd.setCursor(0, 3);
  924. lcd_printPGM(_i("PINDA Heating"));////MSG_PINDA_PREHEAT c=20 r=1
  925. if (custom_message_state <= PINDA_HEAT_T) {
  926. lcd_printPGM(PSTR(": "));
  927. lcd.print(custom_message_state); //seconds
  928. lcd.print(' ');
  929. }
  930. }
  931. }
  932. else
  933. {
  934. // Nothing special, print status message normally
  935. lcd.print(lcd_status_message);
  936. }
  937. }
  938. // Fill the rest of line to have nice and clean output
  939. for(int fillspace = 0; fillspace<20;fillspace++)
  940. {
  941. if((lcd_status_message[fillspace] > 31 ))
  942. {
  943. }
  944. else
  945. {
  946. lcd.print(' ');
  947. }
  948. }
  949. }
  950. static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
  951. {
  952. char c;
  953. //Use all characters in narrow LCDs
  954. #if LCD_WIDTH < 20
  955. uint8_t n = LCD_WIDTH - 1 - 1;
  956. #else
  957. uint8_t n = LCD_WIDTH - 1 - 2;
  958. #endif
  959. lcd.setCursor(0, row);
  960. lcd.print(pre_char);
  961. while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
  962. {
  963. lcd.print(c);
  964. pstr++;
  965. n--;
  966. }
  967. while(n--)
  968. lcd.print(' ');
  969. lcd.print(post_char);
  970. lcd.print(' ');
  971. }
  972. static void lcd_implementation_drawmenu_generic_RAM(uint8_t row, const char* str, char pre_char, char post_char)
  973. {
  974. char c;
  975. //Use all characters in narrow LCDs
  976. #if LCD_WIDTH < 20
  977. uint8_t n = LCD_WIDTH - 1 - 1;
  978. #else
  979. uint8_t n = LCD_WIDTH - 1 - 2;
  980. #endif
  981. lcd.setCursor(0, row);
  982. lcd.print(pre_char);
  983. while( ((c = *str) != '\0') && (n>0) )
  984. {
  985. lcd.print(c);
  986. str++;
  987. n--;
  988. }
  989. while(n--)
  990. lcd.print(' ');
  991. lcd.print(post_char);
  992. lcd.print(' ');
  993. }
  994. static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data)
  995. {
  996. char c;
  997. //Use all characters in narrow LCDs
  998. #if LCD_WIDTH < 20
  999. uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data);
  1000. #else
  1001. uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data);
  1002. #endif
  1003. lcd.setCursor(0, row);
  1004. lcd.print(pre_char);
  1005. while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
  1006. {
  1007. lcd.print(c);
  1008. pstr++;
  1009. n--;
  1010. }
  1011. lcd.print(':');
  1012. while(n--)
  1013. lcd.print(' ');
  1014. lcd.print(data);
  1015. }
  1016. static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data)
  1017. {
  1018. char c;
  1019. //Use all characters in narrow LCDs
  1020. #if LCD_WIDTH < 20
  1021. uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data);
  1022. #else
  1023. uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data);
  1024. #endif
  1025. lcd.setCursor(0, row);
  1026. lcd.print(pre_char);
  1027. while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
  1028. {
  1029. lcd.print(c);
  1030. pstr++;
  1031. n--;
  1032. }
  1033. lcd.print(':');
  1034. while(n--)
  1035. lcd.print(' ');
  1036. lcd_printPGM(data);
  1037. }
  1038. extern char *wfac_to_str5(const uint8_t &x);
  1039. extern char *mres_to_str3(const uint8_t &x);
  1040. #define lcd_implementation_drawmenu_setting_edit_wfac_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', wfac_to_str5(*(data)))
  1041. #define lcd_implementation_drawmenu_setting_edit_wfac(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', wfac_to_str5(*(data)))
  1042. #define lcd_implementation_drawmenu_setting_edit_mres_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', mres_to_str3(*(data)))
  1043. #define lcd_implementation_drawmenu_setting_edit_mres(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', mres_to_str3(*(data)))
  1044. #define lcd_implementation_drawmenu_setting_edit_byte3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3((uint8_t)*(data)))
  1045. #define lcd_implementation_drawmenu_setting_edit_byte3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3((uint8_t)*(data)))
  1046. #define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
  1047. #define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
  1048. #define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
  1049. #define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
  1050. #define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
  1051. #define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
  1052. #define lcd_implementation_drawmenu_setting_edit_float43_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
  1053. #define lcd_implementation_drawmenu_setting_edit_float43(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
  1054. #define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
  1055. #define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
  1056. #define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
  1057. #define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
  1058. #define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
  1059. #define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
  1060. #define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
  1061. #define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
  1062. #define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
  1063. #define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
  1064. //Add version for callback functions
  1065. #define lcd_implementation_drawmenu_setting_edit_callback_int3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
  1066. #define lcd_implementation_drawmenu_setting_edit_callback_int3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
  1067. #define lcd_implementation_drawmenu_setting_edit_callback_float3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
  1068. #define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
  1069. #define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
  1070. #define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
  1071. #define lcd_implementation_drawmenu_setting_edit_callback_float43_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
  1072. #define lcd_implementation_drawmenu_setting_edit_callback_float43(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
  1073. #define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
  1074. #define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
  1075. #define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
  1076. #define lcd_implementation_drawmenu_setting_edit_callback_float52(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
  1077. #define lcd_implementation_drawmenu_setting_edit_callback_float51_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
  1078. #define lcd_implementation_drawmenu_setting_edit_callback_float51(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
  1079. #define lcd_implementation_drawmenu_setting_edit_callback_long5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
  1080. #define lcd_implementation_drawmenu_setting_edit_callback_long5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
  1081. #define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
  1082. #define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
  1083. void lcd_implementation_drawedit(const char* pstr, char* value)
  1084. {
  1085. lcd.setCursor(1, 1);
  1086. lcd_printPGM(pstr);
  1087. lcd.print(':');
  1088. #if LCD_WIDTH < 20
  1089. lcd.setCursor(LCD_WIDTH - strlen(value), 1);
  1090. #else
  1091. lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1);
  1092. #endif
  1093. lcd.print(value);
  1094. }
  1095. void lcd_implementation_drawedit_2(const char* pstr, char* value)
  1096. {
  1097. lcd.setCursor(0, 1);
  1098. lcd_printPGM(pstr);
  1099. lcd.print(':');
  1100. lcd.setCursor((LCD_WIDTH - strlen(value))/2, 3);
  1101. lcd.print(value);
  1102. lcd.print(" mm");
  1103. }
  1104. static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
  1105. {
  1106. char c;
  1107. int enc_dif = encoderDiff;
  1108. uint8_t n = LCD_WIDTH - 1;
  1109. for(int g = 0; g<4;g++){
  1110. lcd.setCursor(0, g);
  1111. lcd.print(' ');
  1112. }
  1113. lcd.setCursor(0, row);
  1114. lcd.print('>');
  1115. int i = 1;
  1116. int j = 0;
  1117. char* longFilenameTMP = longFilename;
  1118. while((c = *longFilenameTMP) != '\0')
  1119. {
  1120. lcd.setCursor(i, row);
  1121. lcd.print(c);
  1122. i++;
  1123. longFilenameTMP++;
  1124. if(i==LCD_WIDTH){
  1125. i=1;
  1126. j++;
  1127. longFilenameTMP = longFilename + j;
  1128. n = LCD_WIDTH - 1;
  1129. for(int g = 0; g<300 ;g++){
  1130. manage_heater();
  1131. if(LCD_CLICKED || ( enc_dif != encoderDiff )){
  1132. longFilenameTMP = longFilename;
  1133. *(longFilenameTMP + LCD_WIDTH - 2) = '\0';
  1134. i = 1;
  1135. j = 0;
  1136. break;
  1137. }else{
  1138. if (j == 1) delay(3); //wait around 1.2 s to start scrolling text
  1139. delay(1); //then scroll with redrawing every 300 ms
  1140. }
  1141. }
  1142. }
  1143. }
  1144. if(c!='\0'){
  1145. lcd.setCursor(i, row);
  1146. lcd.print(c);
  1147. i++;
  1148. }
  1149. n=n-i+1;
  1150. while(n--)
  1151. lcd.print(' ');
  1152. }
  1153. static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, const char* filename, char* longFilename)
  1154. {
  1155. char c;
  1156. uint8_t n = LCD_WIDTH - 1;
  1157. lcd.setCursor(0, row);
  1158. lcd.print(' ');
  1159. if (longFilename[0] != '\0')
  1160. {
  1161. filename = longFilename;
  1162. longFilename[LCD_WIDTH-1] = '\0';
  1163. }
  1164. while( ((c = *filename) != '\0') && (n>0) )
  1165. {
  1166. lcd.print(c);
  1167. filename++;
  1168. n--;
  1169. }
  1170. while(n--)
  1171. lcd.print(' ');
  1172. }
  1173. static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
  1174. {
  1175. char c;
  1176. uint8_t n = LCD_WIDTH - 2;
  1177. lcd.setCursor(0, row);
  1178. lcd.print('>');
  1179. lcd.print(LCD_STR_FOLDER[0]);
  1180. if (longFilename[0] != '\0')
  1181. {
  1182. filename = longFilename;
  1183. longFilename[LCD_WIDTH-2] = '\0';
  1184. }
  1185. while( ((c = *filename) != '\0') && (n>0) )
  1186. {
  1187. lcd.print(c);
  1188. filename++;
  1189. n--;
  1190. }
  1191. while(n--)
  1192. lcd.print(' ');
  1193. }
  1194. static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pstr, const char* filename, char* longFilename)
  1195. {
  1196. char c;
  1197. uint8_t n = LCD_WIDTH - 2;
  1198. lcd.setCursor(0, row);
  1199. lcd.print(' ');
  1200. lcd.print(LCD_STR_FOLDER[0]);
  1201. if (longFilename[0] != '\0')
  1202. {
  1203. filename = longFilename;
  1204. longFilename[LCD_WIDTH-2] = '\0';
  1205. }
  1206. while( ((c = *filename) != '\0') && (n>0) )
  1207. {
  1208. lcd.print(c);
  1209. filename++;
  1210. n--;
  1211. }
  1212. while(n--)
  1213. lcd.print(' ');
  1214. }
  1215. #define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
  1216. #define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0])
  1217. #define lcd_implementation_drawmenu_back_RAM_selected(row, str, data) lcd_implementation_drawmenu_generic_RAM(row, str, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
  1218. #define lcd_implementation_drawmenu_back_RAM(row, str, data) lcd_implementation_drawmenu_generic_RAM(row, str, ' ', LCD_STR_UPLEVEL[0])
  1219. #define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
  1220. #define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0])
  1221. #define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
  1222. #define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
  1223. #define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
  1224. #define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
  1225. #define lcd_implementation_drawmenu_setlang_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
  1226. #define lcd_implementation_drawmenu_setlang(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
  1227. static void lcd_implementation_quick_feedback()
  1228. {
  1229. #ifdef LCD_USE_I2C_BUZZER
  1230. #if !defined(LCD_FEEDBACK_FREQUENCY_HZ) || !defined(LCD_FEEDBACK_FREQUENCY_DURATION_MS)
  1231. lcd_buzz(1000/6,100);
  1232. #else
  1233. lcd_buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS,LCD_FEEDBACK_FREQUENCY_HZ);
  1234. #endif
  1235. #elif defined(BEEPER) && BEEPER > -1
  1236. SET_OUTPUT(BEEPER);
  1237. #if !defined(LCD_FEEDBACK_FREQUENCY_HZ) || !defined(LCD_FEEDBACK_FREQUENCY_DURATION_MS)
  1238. for(int8_t i=0;i<10;i++)
  1239. {
  1240. WRITE(BEEPER,HIGH);
  1241. delayMicroseconds(100);
  1242. WRITE(BEEPER,LOW);
  1243. delayMicroseconds(100);
  1244. }
  1245. #else
  1246. for(int8_t i=0;i<(LCD_FEEDBACK_FREQUENCY_DURATION_MS / (1000 / LCD_FEEDBACK_FREQUENCY_HZ));i++)
  1247. {
  1248. WRITE(BEEPER,HIGH);
  1249. delayMicroseconds(1000000 / LCD_FEEDBACK_FREQUENCY_HZ / 2);
  1250. WRITE(BEEPER,LOW);
  1251. delayMicroseconds(1000000 / LCD_FEEDBACK_FREQUENCY_HZ / 2);
  1252. }
  1253. #endif
  1254. #endif
  1255. }
  1256. #ifdef LCD_HAS_STATUS_INDICATORS
  1257. static void lcd_implementation_update_indicators()
  1258. {
  1259. #if defined(LCD_I2C_PANELOLU2) || defined(LCD_I2C_VIKI)
  1260. //set the LEDS - referred to as backlights by the LiquidTWI2 library
  1261. static uint8_t ledsprev = 0;
  1262. uint8_t leds = 0;
  1263. if (target_temperature_bed > 0) leds |= LED_A;
  1264. if (target_temperature[0] > 0) leds |= LED_B;
  1265. if (fanSpeed) leds |= LED_C;
  1266. #if EXTRUDERS > 1
  1267. if (target_temperature[1] > 0) leds |= LED_C;
  1268. #endif
  1269. if (leds != ledsprev) {
  1270. lcd.setBacklight(leds);
  1271. ledsprev = leds;
  1272. }
  1273. #endif
  1274. }
  1275. #endif
  1276. #ifdef LCD_HAS_SLOW_BUTTONS
  1277. extern uint32_t blocking_enc;
  1278. static uint8_t lcd_implementation_read_slow_buttons()
  1279. {
  1280. #ifdef LCD_I2C_TYPE_MCP23017
  1281. uint8_t slow_buttons;
  1282. // Reading these buttons this is likely to be too slow to call inside interrupt context
  1283. // so they are called during normal lcd_update
  1284. slow_buttons = lcd.readButtons() << B_I2C_BTN_OFFSET;
  1285. #if defined(LCD_I2C_VIKI)
  1286. if(slow_buttons & (B_MI|B_RI)) { //LCD clicked
  1287. if(blocking_enc > millis()) {
  1288. slow_buttons &= ~(B_MI|B_RI); // Disable LCD clicked buttons if screen is updated
  1289. }
  1290. }
  1291. #endif
  1292. return slow_buttons;
  1293. #endif
  1294. }
  1295. #endif
  1296. #endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H