1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071 |
- #ifndef _CONFIG_H
- #define _CONFIG_H
- #include "Configuration_prusa.h"
- #include "pins.h"
- #if (defined(VOLT_IR_PIN) && defined(IR_SENSOR))
- # define IR_SENSOR_ANALOG
- #endif
- //ADC configuration
- #ifndef IR_SENSOR_ANALOG
- #define ADC_CHAN_MSK 0b0000001001011111 //used AD channels bit mask (0,1,2,3,4,6,9)
- #define ADC_DIDR_MSK 0b0000001001011111 //AD channels DIDR mask (1 ~ disabled digital input)
- #define ADC_CHAN_CNT 7 //number of used channels)
- #else //!IR_SENSOR_ANALOG
- #define ADC_CHAN_MSK 0b0000001101011111 //used AD channels bit mask (0,1,2,3,4,6,8,9)
- #define ADC_DIDR_MSK 0b0000001001011111 //AD channels DIDR mask (1 ~ disabled digital input)
- #define ADC_CHAN_CNT 8 //number of used channels)
- #endif //!IR_SENSOR_ANALOG
- #define ADC_OVRSAMPL 16 //oversampling multiplier
- #define ADC_CALLBACK adc_ready //callback function ()
- //SWI2C configuration
- //#define SWI2C_SDA 20 //SDA on P3
- //#define SWI2C_SCL 21 //SCL on P3
- #define SWI2C_A8
- #define SWI2C_DEL 20 //2us clock delay
- #define SWI2C_TMO 2048 //2048 cycles timeout
- //PAT9125 configuration
- //#define PAT9125_SWSPI // software SPI mode (incomplete)
- #ifdef SWI2C_SCL
- #define PAT9125_SWI2C // software I2C mode
- #else
- #define PAT9125_I2C // hardware I2C mode
- #endif
- #define PAT9125_I2C_ADDR 0x75 //ID=LO
- //#define PAT9125_I2C_ADDR 0x79 //ID=HI
- //#define PAT9125_I2C_ADDR 0x73 //ID=NC
- #define PAT9125_XRES 0
- #define PAT9125_YRES 240 // maximum resolution (5*X cpi)
- #define PAT9124_YRES_MM (5*PAT9125_YRES/25.4) // counts per mm
- //SM4 configuration
- #define SM4_DEFDELAY 500 //default step delay [us]
- //TMC2130 - Trinamic stepper driver
- //pinout - hardcoded
- //spi:
- #define TMC2130_SPI_RATE 0 // fosc/4 = 4MHz
- #define TMC2130_SPCR SPI_SPCR(TMC2130_SPI_RATE, 1, 1, 1, 0)
- #define TMC2130_SPSR SPI_SPSR(TMC2130_SPI_RATE)
- //LANG - Multi-language support
- //#define LANG_MODE 0 // primary language only
- #define LANG_MODE 1 // sec. language support
- #define LANG_SIZE_RESERVED 0x3000 // reserved space for secondary language (12288 bytes)
- //Community language support
- #define COMMUNITY_LANG_NL // Community Dutch language
- //#define COMMUNITY_LANG_QR // Community new language //..use this as a template and replace 'QR'
- #if defined(COMMUNITY_LANG_NL) //|| defined(COMMUNITY_LANG_QR) //..use last part as a template and replace 'QR'
- #define COMMUNITY_LANG_SUPPORT
- #endif
- #endif //_CONFIG_H
|