ultralcd.cpp 273 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126212721282129213021312132213321342135213621372138213921402141214221432144214521462147214821492150215121522153215421552156215721582159216021612162216321642165216621672168216921702171217221732174217521762177217821792180218121822183218421852186218721882189219021912192219321942195219621972198219922002201220222032204220522062207220822092210221122122213221422152216221722182219222022212222222322242225222622272228222922302231223222332234223522362237223822392240224122422243224422452246224722482249225022512252225322542255225622572258225922602261226222632264226522662267226822692270227122722273227422752276227722782279228022812282228322842285228622872288228922902291229222932294229522962297229822992300230123022303230423052306230723082309231023112312231323142315231623172318231923202321232223232324232523262327232823292330233123322333233423352336233723382339234023412342234323442345234623472348234923502351235223532354235523562357235823592360236123622363236423652366236723682369237023712372237323742375237623772378237923802381238223832384238523862387238823892390239123922393239423952396239723982399240024012402240324042405240624072408240924102411241224132414241524162417241824192420242124222423242424252426242724282429243024312432243324342435243624372438243924402441244224432444244524462447244824492450245124522453245424552456245724582459246024612462246324642465246624672468246924702471247224732474247524762477247824792480248124822483248424852486248724882489249024912492249324942495249624972498249925002501250225032504250525062507250825092510251125122513251425152516251725182519252025212522252325242525252625272528252925302531253225332534253525362537253825392540254125422543254425452546254725482549255025512552255325542555255625572558255925602561256225632564256525662567256825692570257125722573257425752576257725782579258025812582258325842585258625872588258925902591259225932594259525962597259825992600260126022603260426052606260726082609261026112612261326142615261626172618261926202621262226232624262526262627262826292630263126322633263426352636263726382639264026412642264326442645264626472648264926502651265226532654265526562657265826592660266126622663266426652666266726682669267026712672267326742675267626772678267926802681268226832684268526862687268826892690269126922693269426952696269726982699270027012702270327042705270627072708270927102711271227132714271527162717271827192720272127222723272427252726272727282729273027312732273327342735273627372738273927402741274227432744274527462747274827492750275127522753275427552756275727582759276027612762276327642765276627672768276927702771277227732774277527762777277827792780278127822783278427852786278727882789279027912792279327942795279627972798279928002801280228032804280528062807280828092810281128122813281428152816281728182819282028212822282328242825282628272828282928302831283228332834283528362837283828392840284128422843284428452846284728482849285028512852285328542855285628572858285928602861286228632864286528662867286828692870287128722873287428752876287728782879288028812882288328842885288628872888288928902891289228932894289528962897289828992900290129022903290429052906290729082909291029112912291329142915291629172918291929202921292229232924292529262927292829292930293129322933293429352936293729382939294029412942294329442945294629472948294929502951295229532954295529562957295829592960296129622963296429652966296729682969297029712972297329742975297629772978297929802981298229832984298529862987298829892990299129922993299429952996299729982999300030013002300330043005300630073008300930103011301230133014301530163017301830193020302130223023302430253026302730283029303030313032303330343035303630373038303930403041304230433044304530463047304830493050305130523053305430553056305730583059306030613062306330643065306630673068306930703071307230733074307530763077307830793080308130823083308430853086308730883089309030913092309330943095309630973098309931003101310231033104310531063107310831093110311131123113311431153116311731183119312031213122312331243125312631273128312931303131313231333134313531363137313831393140314131423143314431453146314731483149315031513152315331543155315631573158315931603161316231633164316531663167316831693170317131723173317431753176317731783179318031813182318331843185318631873188318931903191319231933194319531963197319831993200320132023203320432053206320732083209321032113212321332143215321632173218321932203221322232233224322532263227322832293230323132323233323432353236323732383239324032413242324332443245324632473248324932503251325232533254325532563257325832593260326132623263326432653266326732683269327032713272327332743275327632773278327932803281328232833284328532863287328832893290329132923293329432953296329732983299330033013302330333043305330633073308330933103311331233133314331533163317331833193320332133223323332433253326332733283329333033313332333333343335333633373338333933403341334233433344334533463347334833493350335133523353335433553356335733583359336033613362336333643365336633673368336933703371337233733374337533763377337833793380338133823383338433853386338733883389339033913392339333943395339633973398339934003401340234033404340534063407340834093410341134123413341434153416341734183419342034213422342334243425342634273428342934303431343234333434343534363437343834393440344134423443344434453446344734483449345034513452345334543455345634573458345934603461346234633464346534663467346834693470347134723473347434753476347734783479348034813482348334843485348634873488348934903491349234933494349534963497349834993500350135023503350435053506350735083509351035113512351335143515351635173518351935203521352235233524352535263527352835293530353135323533353435353536353735383539354035413542354335443545354635473548354935503551355235533554355535563557355835593560356135623563356435653566356735683569357035713572357335743575357635773578357935803581358235833584358535863587358835893590359135923593359435953596359735983599360036013602360336043605360636073608360936103611361236133614361536163617361836193620362136223623362436253626362736283629363036313632363336343635363636373638363936403641364236433644364536463647364836493650365136523653365436553656365736583659366036613662366336643665366636673668366936703671367236733674367536763677367836793680368136823683368436853686368736883689369036913692369336943695369636973698369937003701370237033704370537063707370837093710371137123713371437153716371737183719372037213722372337243725372637273728372937303731373237333734373537363737373837393740374137423743374437453746374737483749375037513752375337543755375637573758375937603761376237633764376537663767376837693770377137723773377437753776377737783779378037813782378337843785378637873788378937903791379237933794379537963797379837993800380138023803380438053806380738083809381038113812381338143815381638173818381938203821382238233824382538263827382838293830383138323833383438353836383738383839384038413842384338443845384638473848384938503851385238533854385538563857385838593860386138623863386438653866386738683869387038713872387338743875387638773878387938803881388238833884388538863887388838893890389138923893389438953896389738983899390039013902390339043905390639073908390939103911391239133914391539163917391839193920392139223923392439253926392739283929393039313932393339343935393639373938393939403941394239433944394539463947394839493950395139523953395439553956395739583959396039613962396339643965396639673968396939703971397239733974397539763977397839793980398139823983398439853986398739883989399039913992399339943995399639973998399940004001400240034004400540064007400840094010401140124013401440154016401740184019402040214022402340244025402640274028402940304031403240334034403540364037403840394040404140424043404440454046404740484049405040514052405340544055405640574058405940604061406240634064406540664067406840694070407140724073407440754076407740784079408040814082408340844085408640874088408940904091409240934094409540964097409840994100410141024103410441054106410741084109411041114112411341144115411641174118411941204121412241234124412541264127412841294130413141324133413441354136413741384139414041414142414341444145414641474148414941504151415241534154415541564157415841594160416141624163416441654166416741684169417041714172417341744175417641774178417941804181418241834184418541864187418841894190419141924193419441954196419741984199420042014202420342044205420642074208420942104211421242134214421542164217421842194220422142224223422442254226422742284229423042314232423342344235423642374238423942404241424242434244424542464247424842494250425142524253425442554256425742584259426042614262426342644265426642674268426942704271427242734274427542764277427842794280428142824283428442854286428742884289429042914292429342944295429642974298429943004301430243034304430543064307430843094310431143124313431443154316431743184319432043214322432343244325432643274328432943304331433243334334433543364337433843394340434143424343434443454346434743484349435043514352435343544355435643574358435943604361436243634364436543664367436843694370437143724373437443754376437743784379438043814382438343844385438643874388438943904391439243934394439543964397439843994400440144024403440444054406440744084409441044114412441344144415441644174418441944204421442244234424442544264427442844294430443144324433443444354436443744384439444044414442444344444445444644474448444944504451445244534454445544564457445844594460446144624463446444654466446744684469447044714472447344744475447644774478447944804481448244834484448544864487448844894490449144924493449444954496449744984499450045014502450345044505450645074508450945104511451245134514451545164517451845194520452145224523452445254526452745284529453045314532453345344535453645374538453945404541454245434544454545464547454845494550455145524553455445554556455745584559456045614562456345644565456645674568456945704571457245734574457545764577457845794580458145824583458445854586458745884589459045914592459345944595459645974598459946004601460246034604460546064607460846094610461146124613461446154616461746184619462046214622462346244625462646274628462946304631463246334634463546364637463846394640464146424643464446454646464746484649465046514652465346544655465646574658465946604661466246634664466546664667466846694670467146724673467446754676467746784679468046814682468346844685468646874688468946904691469246934694469546964697469846994700470147024703470447054706470747084709471047114712471347144715471647174718471947204721472247234724472547264727472847294730473147324733473447354736473747384739474047414742474347444745474647474748474947504751475247534754475547564757475847594760476147624763476447654766476747684769477047714772477347744775477647774778477947804781478247834784478547864787478847894790479147924793479447954796479747984799480048014802480348044805480648074808480948104811481248134814481548164817481848194820482148224823482448254826482748284829483048314832483348344835483648374838483948404841484248434844484548464847484848494850485148524853485448554856485748584859486048614862486348644865486648674868486948704871487248734874487548764877487848794880488148824883488448854886488748884889489048914892489348944895489648974898489949004901490249034904490549064907490849094910491149124913491449154916491749184919492049214922492349244925492649274928492949304931493249334934493549364937493849394940494149424943494449454946494749484949495049514952495349544955495649574958495949604961496249634964496549664967496849694970497149724973497449754976497749784979498049814982498349844985498649874988498949904991499249934994499549964997499849995000500150025003500450055006500750085009501050115012501350145015501650175018501950205021502250235024502550265027502850295030503150325033503450355036503750385039504050415042504350445045504650475048504950505051505250535054505550565057505850595060506150625063506450655066506750685069507050715072507350745075507650775078507950805081508250835084508550865087508850895090509150925093509450955096509750985099510051015102510351045105510651075108510951105111511251135114511551165117511851195120512151225123512451255126512751285129513051315132513351345135513651375138513951405141514251435144514551465147514851495150515151525153515451555156515751585159516051615162516351645165516651675168516951705171517251735174517551765177517851795180518151825183518451855186518751885189519051915192519351945195519651975198519952005201520252035204520552065207520852095210521152125213521452155216521752185219522052215222522352245225522652275228522952305231523252335234523552365237523852395240524152425243524452455246524752485249525052515252525352545255525652575258525952605261526252635264526552665267526852695270527152725273527452755276527752785279528052815282528352845285528652875288528952905291529252935294529552965297529852995300530153025303530453055306530753085309531053115312531353145315531653175318531953205321532253235324532553265327532853295330533153325333533453355336533753385339534053415342534353445345534653475348534953505351535253535354535553565357535853595360536153625363536453655366536753685369537053715372537353745375537653775378537953805381538253835384538553865387538853895390539153925393539453955396539753985399540054015402540354045405540654075408540954105411541254135414541554165417541854195420542154225423542454255426542754285429543054315432543354345435543654375438543954405441544254435444544554465447544854495450545154525453545454555456545754585459546054615462546354645465546654675468546954705471547254735474547554765477547854795480548154825483548454855486548754885489549054915492549354945495549654975498549955005501550255035504550555065507550855095510551155125513551455155516551755185519552055215522552355245525552655275528552955305531553255335534553555365537553855395540554155425543554455455546554755485549555055515552555355545555555655575558555955605561556255635564556555665567556855695570557155725573557455755576557755785579558055815582558355845585558655875588558955905591559255935594559555965597559855995600560156025603560456055606560756085609561056115612561356145615561656175618561956205621562256235624562556265627562856295630563156325633563456355636563756385639564056415642564356445645564656475648564956505651565256535654565556565657565856595660566156625663566456655666566756685669567056715672567356745675567656775678567956805681568256835684568556865687568856895690569156925693569456955696569756985699570057015702570357045705570657075708570957105711571257135714571557165717571857195720572157225723572457255726572757285729573057315732573357345735573657375738573957405741574257435744574557465747574857495750575157525753575457555756575757585759576057615762576357645765576657675768576957705771577257735774577557765777577857795780578157825783578457855786578757885789579057915792579357945795579657975798579958005801580258035804580558065807580858095810581158125813581458155816581758185819582058215822582358245825582658275828582958305831583258335834583558365837583858395840584158425843584458455846584758485849585058515852585358545855585658575858585958605861586258635864586558665867586858695870587158725873587458755876587758785879588058815882588358845885588658875888588958905891589258935894589558965897589858995900590159025903590459055906590759085909591059115912591359145915591659175918591959205921592259235924592559265927592859295930593159325933593459355936593759385939594059415942594359445945594659475948594959505951595259535954595559565957595859595960596159625963596459655966596759685969597059715972597359745975597659775978597959805981598259835984598559865987598859895990599159925993599459955996599759985999600060016002600360046005600660076008600960106011601260136014601560166017601860196020602160226023602460256026602760286029603060316032603360346035603660376038603960406041604260436044604560466047604860496050605160526053605460556056605760586059606060616062606360646065606660676068606960706071607260736074607560766077607860796080608160826083608460856086608760886089609060916092609360946095609660976098609961006101610261036104610561066107610861096110611161126113611461156116611761186119612061216122612361246125612661276128612961306131613261336134613561366137613861396140614161426143614461456146614761486149615061516152615361546155615661576158615961606161616261636164616561666167616861696170617161726173617461756176617761786179618061816182618361846185618661876188618961906191619261936194619561966197619861996200620162026203620462056206620762086209621062116212621362146215621662176218621962206221622262236224622562266227622862296230623162326233623462356236623762386239624062416242624362446245624662476248624962506251625262536254625562566257625862596260626162626263626462656266626762686269627062716272627362746275627662776278627962806281628262836284628562866287628862896290629162926293629462956296629762986299630063016302630363046305630663076308630963106311631263136314631563166317631863196320632163226323632463256326632763286329633063316332633363346335633663376338633963406341634263436344634563466347634863496350635163526353635463556356635763586359636063616362636363646365636663676368636963706371637263736374637563766377637863796380638163826383638463856386638763886389639063916392639363946395639663976398639964006401640264036404640564066407640864096410641164126413641464156416641764186419642064216422642364246425642664276428642964306431643264336434643564366437643864396440644164426443644464456446644764486449645064516452645364546455645664576458645964606461646264636464646564666467646864696470647164726473647464756476647764786479648064816482648364846485648664876488648964906491649264936494649564966497649864996500650165026503650465056506650765086509651065116512651365146515651665176518651965206521652265236524652565266527652865296530653165326533653465356536653765386539654065416542654365446545654665476548654965506551655265536554655565566557655865596560656165626563656465656566656765686569657065716572657365746575657665776578657965806581658265836584658565866587658865896590659165926593659465956596659765986599660066016602660366046605660666076608660966106611661266136614661566166617661866196620662166226623662466256626662766286629663066316632663366346635663666376638663966406641664266436644664566466647664866496650665166526653665466556656665766586659666066616662666366646665666666676668666966706671667266736674667566766677667866796680668166826683668466856686668766886689669066916692669366946695669666976698669967006701670267036704670567066707670867096710671167126713671467156716671767186719672067216722672367246725672667276728672967306731673267336734673567366737673867396740674167426743674467456746674767486749675067516752675367546755675667576758675967606761676267636764676567666767676867696770677167726773677467756776677767786779678067816782678367846785678667876788678967906791679267936794679567966797679867996800680168026803680468056806680768086809681068116812681368146815681668176818681968206821682268236824682568266827682868296830683168326833683468356836683768386839684068416842684368446845684668476848684968506851685268536854685568566857685868596860686168626863686468656866686768686869687068716872687368746875687668776878687968806881688268836884688568866887688868896890689168926893689468956896689768986899690069016902690369046905690669076908690969106911691269136914691569166917691869196920692169226923692469256926692769286929693069316932693369346935693669376938693969406941694269436944694569466947694869496950695169526953695469556956695769586959696069616962696369646965696669676968696969706971697269736974697569766977697869796980698169826983698469856986698769886989699069916992699369946995699669976998699970007001700270037004700570067007700870097010701170127013701470157016701770187019702070217022702370247025702670277028702970307031703270337034703570367037703870397040704170427043704470457046704770487049705070517052705370547055705670577058705970607061706270637064706570667067706870697070707170727073707470757076707770787079708070817082708370847085708670877088708970907091709270937094709570967097709870997100710171027103710471057106710771087109711071117112711371147115711671177118711971207121712271237124712571267127712871297130713171327133713471357136713771387139714071417142714371447145714671477148714971507151715271537154715571567157715871597160716171627163716471657166716771687169717071717172717371747175717671777178717971807181718271837184718571867187718871897190719171927193719471957196719771987199720072017202720372047205720672077208720972107211721272137214721572167217721872197220722172227223722472257226722772287229723072317232723372347235723672377238723972407241724272437244724572467247724872497250725172527253725472557256725772587259726072617262726372647265726672677268726972707271727272737274727572767277727872797280728172827283728472857286728772887289729072917292729372947295729672977298729973007301730273037304730573067307730873097310731173127313731473157316731773187319732073217322732373247325732673277328732973307331733273337334733573367337733873397340734173427343734473457346734773487349735073517352735373547355735673577358735973607361736273637364736573667367736873697370737173727373737473757376737773787379738073817382738373847385738673877388738973907391739273937394739573967397739873997400740174027403740474057406740774087409741074117412741374147415741674177418741974207421742274237424742574267427742874297430743174327433743474357436743774387439744074417442744374447445744674477448744974507451745274537454745574567457745874597460746174627463746474657466746774687469747074717472747374747475747674777478747974807481748274837484748574867487748874897490749174927493749474957496749774987499750075017502750375047505750675077508750975107511751275137514751575167517751875197520752175227523752475257526752775287529753075317532753375347535753675377538753975407541754275437544754575467547754875497550755175527553755475557556755775587559756075617562756375647565756675677568756975707571757275737574757575767577757875797580758175827583758475857586758775887589759075917592759375947595759675977598759976007601760276037604760576067607760876097610761176127613761476157616761776187619762076217622762376247625762676277628762976307631763276337634763576367637763876397640764176427643764476457646764776487649765076517652765376547655765676577658765976607661766276637664766576667667766876697670767176727673767476757676767776787679768076817682768376847685768676877688768976907691769276937694769576967697769876997700770177027703770477057706770777087709771077117712771377147715771677177718771977207721772277237724772577267727772877297730773177327733773477357736773777387739774077417742774377447745774677477748774977507751775277537754775577567757775877597760776177627763776477657766776777687769777077717772777377747775777677777778777977807781778277837784778577867787778877897790779177927793779477957796779777987799780078017802780378047805780678077808780978107811781278137814781578167817781878197820782178227823782478257826782778287829783078317832783378347835783678377838783978407841784278437844784578467847784878497850785178527853785478557856785778587859786078617862786378647865786678677868786978707871787278737874787578767877787878797880788178827883788478857886788778887889789078917892789378947895789678977898789979007901790279037904790579067907790879097910791179127913791479157916791779187919792079217922792379247925792679277928792979307931793279337934793579367937793879397940794179427943794479457946794779487949795079517952795379547955795679577958795979607961796279637964796579667967796879697970797179727973797479757976797779787979798079817982798379847985798679877988798979907991799279937994799579967997799879998000800180028003800480058006800780088009801080118012801380148015801680178018801980208021802280238024802580268027802880298030803180328033803480358036803780388039804080418042804380448045804680478048804980508051805280538054805580568057805880598060806180628063806480658066806780688069807080718072807380748075807680778078807980808081808280838084808580868087808880898090809180928093809480958096809780988099810081018102810381048105810681078108810981108111811281138114811581168117811881198120812181228123812481258126812781288129813081318132813381348135813681378138813981408141814281438144814581468147814881498150815181528153815481558156815781588159816081618162816381648165816681678168816981708171817281738174817581768177817881798180818181828183818481858186818781888189819081918192819381948195819681978198819982008201820282038204820582068207820882098210821182128213821482158216821782188219822082218222822382248225822682278228822982308231823282338234823582368237823882398240824182428243824482458246824782488249825082518252825382548255825682578258825982608261826282638264826582668267826882698270827182728273827482758276827782788279828082818282828382848285828682878288828982908291829282938294829582968297829882998300830183028303830483058306830783088309831083118312831383148315831683178318831983208321832283238324832583268327832883298330833183328333833483358336833783388339834083418342834383448345834683478348834983508351835283538354835583568357835883598360836183628363836483658366836783688369837083718372837383748375837683778378837983808381838283838384838583868387838883898390839183928393839483958396839783988399840084018402840384048405840684078408840984108411841284138414841584168417841884198420842184228423842484258426842784288429843084318432843384348435843684378438843984408441844284438444844584468447844884498450845184528453845484558456845784588459846084618462846384648465846684678468846984708471847284738474847584768477847884798480848184828483848484858486848784888489849084918492849384948495849684978498849985008501850285038504850585068507850885098510851185128513851485158516851785188519852085218522852385248525852685278528852985308531853285338534853585368537853885398540854185428543854485458546854785488549855085518552855385548555855685578558855985608561856285638564856585668567856885698570857185728573857485758576857785788579858085818582858385848585858685878588858985908591859285938594859585968597859885998600860186028603860486058606860786088609861086118612861386148615861686178618861986208621862286238624862586268627862886298630863186328633863486358636863786388639864086418642864386448645864686478648864986508651865286538654865586568657865886598660866186628663866486658666866786688669867086718672867386748675867686778678867986808681868286838684868586868687868886898690869186928693869486958696869786988699870087018702870387048705870687078708870987108711871287138714871587168717871887198720872187228723872487258726872787288729873087318732873387348735873687378738873987408741874287438744874587468747874887498750875187528753875487558756875787588759876087618762876387648765876687678768876987708771877287738774877587768777877887798780878187828783878487858786878787888789879087918792879387948795879687978798879988008801880288038804880588068807880888098810881188128813881488158816881788188819882088218822882388248825882688278828882988308831883288338834883588368837883888398840884188428843884488458846884788488849885088518852885388548855885688578858885988608861886288638864886588668867886888698870887188728873887488758876887788788879888088818882888388848885888688878888888988908891889288938894889588968897889888998900890189028903890489058906890789088909891089118912891389148915891689178918891989208921892289238924892589268927892889298930893189328933893489358936893789388939894089418942894389448945894689478948894989508951895289538954895589568957895889598960896189628963896489658966896789688969897089718972897389748975897689778978897989808981898289838984898589868987898889898990899189928993899489958996899789988999900090019002900390049005900690079008900990109011901290139014901590169017901890199020902190229023902490259026902790289029903090319032903390349035903690379038903990409041904290439044904590469047904890499050905190529053905490559056905790589059906090619062906390649065906690679068906990709071907290739074907590769077907890799080908190829083
  1. //! @file
  2. //! @date Aug 28, 2019
  3. //! @author mkbel
  4. //! @brief LCD
  5. #include "temperature.h"
  6. #include "ultralcd.h"
  7. #include "conv2str.h"
  8. #include "fsensor.h"
  9. #include "Marlin.h"
  10. #include "language.h"
  11. #include "cardreader.h"
  12. #include "temperature.h"
  13. #include "stepper.h"
  14. #include "ConfigurationStore.h"
  15. #include "printers.h"
  16. #include <string.h>
  17. #include "lcd.h"
  18. #include "menu.h"
  19. #include "backlight.h"
  20. #include "util.h"
  21. #include "mesh_bed_leveling.h"
  22. #include "mesh_bed_calibration.h"
  23. //#include "Configuration.h"
  24. #include "cmdqueue.h"
  25. #ifdef FILAMENT_SENSOR
  26. #include "pat9125.h"
  27. #include "fsensor.h"
  28. #endif //FILAMENT_SENSOR
  29. #ifdef TMC2130
  30. #include "tmc2130.h"
  31. #endif //TMC2130
  32. #include "sound.h"
  33. #include "mmu.h"
  34. #include "static_assert.h"
  35. #include "first_lay_cal.h"
  36. #include "fsensor.h"
  37. #include "adc.h"
  38. #include "config.h"
  39. #ifndef LA_NOCOMPAT
  40. #include "la10compat.h"
  41. #endif
  42. int clock_interval = 0;
  43. static void lcd_sd_updir();
  44. static void lcd_mesh_bed_leveling_settings();
  45. #ifdef LCD_BL_PIN
  46. static void lcd_backlight_menu();
  47. #endif
  48. int8_t ReInitLCD = 0;
  49. uint8_t scrollstuff = 0;
  50. int8_t SilentModeMenu = SILENT_MODE_OFF;
  51. uint8_t SilentModeMenu_MMU = 1; //activate mmu unit stealth mode
  52. int8_t FSensorStateMenu = 1;
  53. #ifdef IR_SENSOR_ANALOG
  54. bool bMenuFSDetect=false;
  55. #endif //IR_SENSOR_ANALOG
  56. LcdCommands lcd_commands_type = LcdCommands::Idle;
  57. static uint8_t lcd_commands_step = 0;
  58. CustomMsg custom_message_type = CustomMsg::Status;
  59. unsigned int custom_message_state = 0;
  60. bool isPrintPaused = false;
  61. uint8_t farm_mode = 0;
  62. int farm_timer = 8;
  63. uint8_t farm_status = 0;
  64. bool printer_connected = true;
  65. unsigned long display_time; //just timer for showing pid finished message on lcd;
  66. float pid_temp = DEFAULT_PID_TEMP;
  67. static bool forceMenuExpire = false;
  68. static bool lcd_autoDeplete;
  69. static float manual_feedrate[] = MANUAL_FEEDRATE;
  70. /* !Configuration settings */
  71. uint8_t lcd_status_message_level;
  72. char lcd_status_message[LCD_WIDTH + 1] = ""; //////WELCOME!
  73. unsigned char firstrun = 1;
  74. static uint8_t lay1cal_filament = 0;
  75. static const char separator[] PROGMEM = "--------------------";
  76. /** forward declarations **/
  77. static const char* lcd_display_message_fullscreen_nonBlocking_P(const char *msg, uint8_t &nlines);
  78. // void copy_and_scalePID_i();
  79. // void copy_and_scalePID_d();
  80. /* Different menus */
  81. //static void lcd_status_screen(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
  82. #if (LANG_MODE != 0)
  83. static void lcd_language_menu();
  84. #endif
  85. static void lcd_main_menu();
  86. static void lcd_tune_menu();
  87. //static void lcd_move_menu();
  88. static void lcd_settings_menu();
  89. static void lcd_calibration_menu();
  90. static void lcd_control_temperature_menu();
  91. #ifdef TMC2130
  92. static void lcd_settings_linearity_correction_menu_save();
  93. #endif
  94. static void prusa_stat_printerstatus(int _status);
  95. static void prusa_stat_farm_number();
  96. static void prusa_stat_diameter();
  97. static void prusa_stat_temperatures();
  98. static void prusa_stat_printinfo();
  99. static void lcd_menu_xyz_y_min();
  100. static void lcd_menu_xyz_skew();
  101. static void lcd_menu_xyz_offset();
  102. static void lcd_menu_fails_stats_mmu();
  103. static void lcd_menu_fails_stats_mmu_print();
  104. static void lcd_menu_fails_stats_mmu_total();
  105. static void mmu_unload_filament();
  106. static void lcd_v2_calibration();
  107. //static void lcd_menu_show_sensors_state(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
  108. static void mmu_fil_eject_menu();
  109. static void mmu_load_to_nozzle_menu();
  110. static void preheat_or_continue();
  111. #ifdef MMU_HAS_CUTTER
  112. static void mmu_cut_filament_menu();
  113. #endif //MMU_HAS_CUTTER
  114. #if defined(TMC2130) || defined(FILAMENT_SENSOR)
  115. static void lcd_menu_fails_stats();
  116. #endif //TMC2130 or FILAMENT_SENSOR
  117. #ifdef TMC2130
  118. static void lcd_belttest_v();
  119. #endif //TMC2130
  120. static void lcd_selftest_v();
  121. #ifdef TMC2130
  122. static void reset_crash_det(unsigned char axis);
  123. static bool lcd_selfcheck_axis_sg(unsigned char axis);
  124. #else
  125. static bool lcd_selfcheck_axis(int _axis, int _travel);
  126. static bool lcd_selfcheck_pulleys(int axis);
  127. #endif //TMC2130
  128. static bool lcd_selfcheck_endstops();
  129. static bool lcd_selfcheck_check_heater(bool _isbed);
  130. enum class TestScreen : uint_least8_t
  131. {
  132. ExtruderFan,
  133. PrintFan,
  134. FansOk,
  135. EndStops,
  136. AxisX,
  137. AxisY,
  138. AxisZ,
  139. Bed,
  140. Hotend,
  141. HotendOk,
  142. Fsensor,
  143. FsensorOk,
  144. AllCorrect,
  145. Failed,
  146. Home,
  147. };
  148. enum class TestError : uint_least8_t
  149. {
  150. Heater,
  151. Bed,
  152. Endstops,
  153. Motor,
  154. Endstop,
  155. PrintFan,
  156. ExtruderFan,
  157. Pulley,
  158. Axis,
  159. SwappedFan,
  160. WiringFsensor,
  161. TriggeringFsensor,
  162. FsensorLevel
  163. };
  164. static int lcd_selftest_screen(TestScreen screen, int _progress, int _progress_scale, bool _clear, int _delay);
  165. static void lcd_selftest_screen_step(int _row, int _col, int _state, const char *_name, const char *_indicator);
  166. static bool lcd_selftest_manual_fan_check(int _fan, bool check_opposite,
  167. bool _default=false);
  168. #ifdef FANCHECK
  169. /** Enumerate for lcd_selftest_fan_auto function.
  170. */
  171. enum class FanCheck : uint_least8_t {
  172. Success,
  173. PrintFan,
  174. ExtruderFan,
  175. SwappedFan,
  176. };
  177. /**
  178. * Try to check fan working and wiring.
  179. *
  180. * @param _fan i fan number 0 means extruder fan, 1 means print fan.
  181. *
  182. * @returns a TestError noerror, extruderFan, printFan or swappedFan.
  183. */
  184. static FanCheck lcd_selftest_fan_auto(int _fan);
  185. #endif //FANCHECK
  186. #ifdef PAT9125
  187. static bool lcd_selftest_fsensor();
  188. #endif //PAT9125
  189. static bool selftest_irsensor();
  190. #ifdef IR_SENSOR_ANALOG
  191. static bool lcd_selftest_IRsensor(bool bStandalone=false);
  192. static void lcd_detect_IRsensor();
  193. #endif //IR_SENSOR_ANALOG
  194. static void lcd_selftest_error(TestError error, const char *_error_1, const char *_error_2);
  195. static void lcd_colorprint_change();
  196. #ifdef SNMM
  197. static int get_ext_nr();
  198. #endif //SNMM
  199. #if defined (SNMM) || defined(SNMM_V2)
  200. static void fil_load_menu();
  201. static void fil_unload_menu();
  202. #endif // SNMM || SNMM_V2
  203. static void lcd_disable_farm_mode();
  204. static void lcd_set_fan_check();
  205. #ifdef MMU_HAS_CUTTER
  206. static void lcd_cutter_enabled();
  207. #endif
  208. #ifdef SNMM
  209. static char snmm_stop_print_menu();
  210. #endif //SNMM
  211. #ifdef SDCARD_SORT_ALPHA
  212. static void lcd_sort_type_set();
  213. #endif
  214. static void lcd_babystep_z();
  215. static void lcd_send_status();
  216. #ifdef FARM_CONNECT_MESSAGE
  217. static void lcd_connect_printer();
  218. #endif //FARM_CONNECT_MESSAGE
  219. //! Beware: has side effects - forces lcd_draw_update to 2, which means clear the display
  220. void lcd_finishstatus();
  221. static void lcd_sdcard_menu();
  222. static void lcd_sheet_menu();
  223. #ifdef DELTA_CALIBRATION_MENU
  224. static void lcd_delta_calibrate_menu();
  225. #endif // DELTA_CALIBRATION_MENU
  226. /* Different types of actions that can be used in menu items. */
  227. static void menu_action_sdfile(const char* filename);
  228. static void menu_action_sddirectory(const char* filename);
  229. #define ENCODER_FEEDRATE_DEADZONE 10
  230. #define STATE_NA 255
  231. #define STATE_OFF 0
  232. #define STATE_ON 1
  233. /*
  234. #define MENU_ITEM(type, label, args...) do { \
  235. if (menu_item == menu_line) { \
  236. if (lcd_draw_update) { \
  237. const char* _label_pstr = (label); \
  238. if (lcd_encoder == menu_item) { \
  239. lcd_implementation_drawmenu_ ## type ## _selected (menu_row, _label_pstr , ## args ); \
  240. }else{\
  241. lcd_implementation_drawmenu_ ## type (menu_row, _label_pstr , ## args ); \
  242. }\
  243. }\
  244. if (menu_clicked && (lcd_encoder == menu_item)) {\
  245. lcd_quick_feedback(); \
  246. menu_action_ ## type ( args ); \
  247. return;\
  248. }\
  249. }\
  250. menu_item++;\
  251. } while(0)
  252. */
  253. #if (SDCARDDETECT > 0)
  254. bool lcd_oldcardstatus;
  255. #endif
  256. uint8_t selected_sheet = 0;
  257. bool ignore_click = false;
  258. bool wait_for_unclick;
  259. // place-holders for Ki and Kd edits
  260. #ifdef PIDTEMP
  261. // float raw_Ki, raw_Kd;
  262. #endif
  263. bool bMain; // flag (i.e. 'fake parameter') for 'lcd_sdcard_menu()' function
  264. bool bSettings; // flag (i.e. 'fake parameter') for 'lcd_hw_setup_menu()' function
  265. const char STR_SEPARATOR[] PROGMEM = "------------";
  266. static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* longFilename)
  267. {
  268. char c;
  269. uint8_t n = LCD_WIDTH - 1;
  270. lcd_set_cursor(0, row);
  271. lcd_print((lcd_encoder == menu_item)?'>':' ');
  272. while( ((c = *longFilename) != '\0') && (n>0) )
  273. {
  274. lcd_print(c);
  275. longFilename++;
  276. n--;
  277. }
  278. lcd_space(n);
  279. }
  280. static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* longFilename)
  281. {
  282. char c;
  283. uint8_t n = LCD_WIDTH - 2;
  284. lcd_set_cursor(0, row);
  285. lcd_print((lcd_encoder == menu_item)?'>':' ');
  286. lcd_print(LCD_STR_FOLDER[0]);
  287. while( ((c = *longFilename) != '\0') && (n>0) )
  288. {
  289. lcd_print(c);
  290. longFilename++;
  291. n--;
  292. }
  293. lcd_space(n);
  294. }
  295. #define MENU_ITEM_SDDIR(str_fn, str_fnl) do { if (menu_item_sddir(str_fn, str_fnl)) return; } while (0)
  296. #define MENU_ITEM_SDFILE(str_fn, str_fnl) do { if (menu_item_sdfile(str_fn, str_fnl)) return; } while (0)
  297. uint8_t menu_item_sddir(const char* str_fn, char* str_fnl)
  298. {
  299. if (menu_item == menu_line)
  300. {
  301. if (lcd_draw_update)
  302. {
  303. lcd_implementation_drawmenu_sddirectory(menu_row, (str_fnl[0] == '\0') ? str_fn : str_fnl);
  304. }
  305. if (menu_clicked && (lcd_encoder == menu_item))
  306. {
  307. menu_clicked = false;
  308. lcd_update_enabled = 0;
  309. menu_action_sddirectory(str_fn);
  310. lcd_update_enabled = 1;
  311. /* return */ menu_item_ret();
  312. return 1;
  313. }
  314. }
  315. menu_item++;
  316. return 0;
  317. }
  318. static uint8_t menu_item_sdfile(const char* str_fn, char* str_fnl)
  319. {
  320. if (menu_item == menu_line)
  321. {
  322. if (lcd_draw_update)
  323. {
  324. lcd_implementation_drawmenu_sdfile(menu_row, (str_fnl[0] == '\0') ? str_fn : str_fnl);
  325. }
  326. if (menu_clicked && (lcd_encoder == menu_item))
  327. {
  328. lcd_consume_click();
  329. menu_action_sdfile(str_fn);
  330. /* return */ menu_item_ret();
  331. return 1;
  332. }
  333. }
  334. menu_item++;
  335. return 0;
  336. }
  337. // Print temperature (nozzle/bed) (9 chars total)
  338. void lcdui_print_temp(char type, int val_current, int val_target)
  339. {
  340. int chars = lcd_printf_P(_N("%c%3d/%d%c"), type, val_current, val_target, LCD_STR_DEGREE[0]);
  341. lcd_space(9 - chars);
  342. }
  343. // Print Z-coordinate (8 chars total)
  344. void lcdui_print_Z_coord(void)
  345. {
  346. if (custom_message_type == CustomMsg::MeshBedLeveling)
  347. lcd_puts_P(_N("Z --- "));
  348. else
  349. lcd_printf_P(_N("Z%6.2f%c"), current_position[Z_AXIS], axis_known_position[Z_AXIS]?' ':'?');
  350. }
  351. #ifdef PLANNER_DIAGNOSTICS
  352. // Print planner diagnostics (8 chars total)
  353. void lcdui_print_planner_diag(void)
  354. {
  355. lcd_set_cursor(LCD_WIDTH - 8-2, 1);
  356. lcd_print(LCD_STR_FEEDRATE[0]);
  357. lcd_print(itostr3(feedmultiply));
  358. lcd_puts_P(PSTR("% Q"));
  359. {
  360. uint8_t queue = planner_queue_min();
  361. if (queue < (BLOCK_BUFFER_SIZE >> 1))
  362. lcd_putc('!');
  363. else
  364. {
  365. lcd_putc((char)(queue / 10) + '0');
  366. queue %= 10;
  367. }
  368. lcd_putc((char)queue + '0');
  369. planner_queue_min_reset();
  370. }
  371. }
  372. #endif // PLANNER_DIAGNOSTICS
  373. // Print feedrate (8 chars total)
  374. void lcdui_print_feedrate(void)
  375. {
  376. int chars = lcd_printf_P(_N("%c%3d%%"), LCD_STR_FEEDRATE[0], feedmultiply);
  377. lcd_space(8 - chars);
  378. }
  379. // Print percent done in form "USB---%", " SD---%", " ---%" (7 chars total)
  380. void lcdui_print_percent_done(void)
  381. {
  382. const char* src = is_usb_printing?_N("USB"):(IS_SD_PRINTING?_N(" SD"):_N(" "));
  383. char per[4];
  384. bool num = IS_SD_PRINTING || (PRINTER_ACTIVE && (print_percent_done_normal != PRINT_PERCENT_DONE_INIT));
  385. if (!num || heating_status) // either not printing or heating
  386. {
  387. const int8_t sheetNR = eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet));
  388. const int8_t nextSheet = eeprom_next_initialized_sheet(sheetNR);
  389. if ((nextSheet >= 0) && (sheetNR != nextSheet))
  390. {
  391. char sheet[8];
  392. eeprom_read_block(sheet, EEPROM_Sheets_base->s[sheetNR].name, 7);
  393. sheet[7] = '\0';
  394. lcd_printf_P(PSTR("%-7s"),sheet);
  395. return; //do not also print the percentage
  396. }
  397. }
  398. sprintf_P(per, num?_N("%3hhd"):_N("---"), calc_percent_done());
  399. lcd_printf_P(_N("%3S%3s%%"), src, per);
  400. }
  401. // Print extruder status (5 chars total)
  402. void lcdui_print_extruder(void)
  403. {
  404. int chars = 0;
  405. if (mmu_extruder == tmp_extruder) {
  406. if (mmu_extruder == MMU_FILAMENT_UNKNOWN) chars = lcd_printf_P(_N(" F?"));
  407. else chars = lcd_printf_P(_N(" F%u"), mmu_extruder + 1);
  408. }
  409. else
  410. {
  411. if (mmu_extruder == MMU_FILAMENT_UNKNOWN) chars = lcd_printf_P(_N(" ?>%u"), tmp_extruder + 1);
  412. else chars = lcd_printf_P(_N(" %u>%u"), mmu_extruder + 1, tmp_extruder + 1);
  413. }
  414. lcd_space(5 - chars);
  415. }
  416. // Print farm number (5 chars total)
  417. void lcdui_print_farm(void)
  418. {
  419. lcd_printf_P(_N(" FRM "));
  420. }
  421. #ifdef CMD_DIAGNOSTICS
  422. // Print CMD queue diagnostic (8 chars total)
  423. void lcdui_print_cmd_diag(void)
  424. {
  425. lcd_set_cursor(LCD_WIDTH - 8 -1, 2);
  426. lcd_puts_P(PSTR(" C"));
  427. lcd_print(buflen); // number of commands in cmd buffer
  428. if (buflen < 9) lcd_print(' ');
  429. }
  430. #endif //CMD_DIAGNOSTICS
  431. // Print time (8 chars total)
  432. void lcdui_print_time(void)
  433. {
  434. //if remaining print time estimation is available print it else print elapsed time
  435. int chars = 0;
  436. if (PRINTER_ACTIVE) {
  437. uint16_t print_t = PRINT_TIME_REMAINING_INIT;
  438. uint16_t print_tr = PRINT_TIME_REMAINING_INIT;
  439. uint16_t print_tc = PRINT_TIME_REMAINING_INIT;
  440. char suff = ' ';
  441. char suff_doubt = ' ';
  442. #ifdef TMC2130
  443. if (SilentModeMenu != SILENT_MODE_OFF) {
  444. if (print_time_remaining_silent != PRINT_TIME_REMAINING_INIT)
  445. print_tr = print_time_remaining_silent;
  446. //#ifdef CLOCK_INTERVAL_TIME
  447. if (print_time_to_change_silent != PRINT_TIME_REMAINING_INIT)
  448. print_tc = print_time_to_change_silent;
  449. //#endif //CLOCK_INTERVAL_TIME
  450. } else {
  451. #endif //TMC2130
  452. if (print_time_remaining_normal != PRINT_TIME_REMAINING_INIT)
  453. print_tr = print_time_remaining_normal;
  454. //#ifdef CLOCK_INTERVAL_TIME
  455. if (print_time_to_change_normal != PRINT_TIME_REMAINING_INIT)
  456. print_tc = print_time_to_change_normal;
  457. //#endif //CLOCK_INTERVAL_TIME
  458. #ifdef TMC2130
  459. }
  460. #endif //TMC2130
  461. //#ifdef CLOCK_INTERVAL_TIME
  462. if (clock_interval == CLOCK_INTERVAL_TIME*2)
  463. clock_interval = 0;
  464. clock_interval++;
  465. if (print_tc != PRINT_TIME_REMAINING_INIT && clock_interval > CLOCK_INTERVAL_TIME) {
  466. print_t = print_tc;
  467. suff = 'C';
  468. } else
  469. //#endif //CLOCK_INTERVAL_TIME
  470. if (print_tr != PRINT_TIME_REMAINING_INIT) {
  471. print_t = print_tr;
  472. suff = 'R';
  473. } else
  474. print_t = _millis() / 60000 - starttime / 60000;
  475. if (feedmultiply != 100 && (print_t == print_tr || print_t == print_tc)) {
  476. suff_doubt = '?';
  477. print_t = 100ul * print_t / feedmultiply;
  478. }
  479. if (print_t < 6000) //time<100h
  480. chars = lcd_printf_P(_N("%c%02u:%02u%c%c"), LCD_STR_CLOCK[0], print_t / 60, print_t % 60, suff, suff_doubt);
  481. else //time>=100h
  482. chars = lcd_printf_P(_N("%c%3uh %c%c"), LCD_STR_CLOCK[0], print_t / 60, suff, suff_doubt);
  483. }
  484. else
  485. chars = lcd_printf_P(_N("%c--:-- "), LCD_STR_CLOCK[0]);
  486. lcd_space(8 - chars);
  487. }
  488. //! @Brief Print status line on status screen
  489. void lcdui_print_status_line(void)
  490. {
  491. if (heating_status) { // If heating flag, show progress of heating
  492. heating_status_counter++;
  493. if (heating_status_counter > 13) {
  494. heating_status_counter = 0;
  495. }
  496. lcd_set_cursor(7, 3);
  497. lcd_space(13);
  498. for (unsigned int dots = 0; dots < heating_status_counter; dots++) {
  499. lcd_putc_at(7 + dots, 3, '.');
  500. }
  501. switch (heating_status) {
  502. case 1:
  503. lcd_puts_at_P(0, 3, _T(MSG_HEATING));
  504. break;
  505. case 2:
  506. lcd_puts_at_P(0, 3, _T(MSG_HEATING_COMPLETE));
  507. heating_status = 0;
  508. heating_status_counter = 0;
  509. break;
  510. case 3:
  511. lcd_puts_at_P(0, 3, _T(MSG_BED_HEATING));
  512. break;
  513. case 4:
  514. lcd_puts_at_P(0, 3, _T(MSG_BED_DONE));
  515. heating_status = 0;
  516. heating_status_counter = 0;
  517. break;
  518. default:
  519. break;
  520. }
  521. }
  522. else if ((IS_SD_PRINTING) && (custom_message_type == CustomMsg::Status)) { // If printing from SD, show what we are printing
  523. const char* longFilenameOLD = (card.longFilename[0] ? card.longFilename : card.filename);
  524. if(strlen(longFilenameOLD) > LCD_WIDTH) {
  525. int inters = 0;
  526. int gh = scrollstuff;
  527. while (((gh - scrollstuff) < LCD_WIDTH) && (inters == 0)) {
  528. if (longFilenameOLD[gh] == '\0') {
  529. lcd_set_cursor(gh - scrollstuff, 3);
  530. lcd_print(longFilenameOLD[gh - 1]);
  531. scrollstuff = 0;
  532. gh = scrollstuff;
  533. inters = 1;
  534. } else {
  535. lcd_set_cursor(gh - scrollstuff, 3);
  536. lcd_print(longFilenameOLD[gh - 1]);
  537. gh++;
  538. }
  539. }
  540. scrollstuff++;
  541. } else {
  542. lcd_printf_P(PSTR("%-20s"), longFilenameOLD);
  543. }
  544. } else { // Otherwise check for other special events
  545. switch (custom_message_type) {
  546. case CustomMsg::MsgUpdate: //Short message even while printing from SD
  547. case CustomMsg::Status: // Nothing special, print status message normally
  548. case CustomMsg::M0Wait: // M0/M1 Wait command working even from SD
  549. lcd_print(lcd_status_message);
  550. break;
  551. case CustomMsg::MeshBedLeveling: // If mesh bed leveling in progress, show the status
  552. if (custom_message_state > 10) {
  553. lcd_set_cursor(0, 3);
  554. lcd_space(LCD_WIDTH);
  555. lcd_puts_at_P(0, 3, _T(MSG_CALIBRATE_Z_AUTO));
  556. lcd_puts_P(PSTR(" : "));
  557. lcd_print(custom_message_state-10);
  558. } else {
  559. if (custom_message_state == 3)
  560. {
  561. lcd_puts_P(_T(WELCOME_MSG));
  562. lcd_setstatuspgm(_T(WELCOME_MSG));
  563. custom_message_type = CustomMsg::Status;
  564. }
  565. if (custom_message_state > 3 && custom_message_state <= 10 ) {
  566. lcd_set_cursor(0, 3);
  567. lcd_space(19);
  568. lcd_puts_at_P(0, 3, _i("Calibration done"));////MSG_HOMEYZ_DONE c=20
  569. custom_message_state--;
  570. }
  571. }
  572. break;
  573. case CustomMsg::FilamentLoading: // If loading filament, print status
  574. lcd_print(lcd_status_message);
  575. break;
  576. case CustomMsg::PidCal: // PID tuning in progress
  577. lcd_print(lcd_status_message);
  578. if (pid_cycle <= pid_number_of_cycles && custom_message_state > 0) {
  579. lcd_set_cursor(10, 3);
  580. lcd_print(itostr3(pid_cycle));
  581. lcd_print('/');
  582. lcd_print(itostr3left(pid_number_of_cycles));
  583. }
  584. break;
  585. case CustomMsg::TempCal: // PINDA temp calibration in progress
  586. char statusLine[LCD_WIDTH + 1];
  587. sprintf_P(statusLine, PSTR("%-20S"), _T(MSG_TEMP_CALIBRATION));
  588. char progress[4];
  589. sprintf_P(progress, PSTR("%d/6"), custom_message_state);
  590. memcpy(statusLine + 12, progress, sizeof(progress) - 1);
  591. lcd_set_cursor(0, 3);
  592. lcd_print(statusLine);
  593. break;
  594. case CustomMsg::TempCompPreheat: // temp compensation preheat
  595. lcd_puts_at_P(0, 3, _i("PINDA Heating"));////MSG_PINDA_PREHEAT c=20
  596. if (custom_message_state <= PINDA_HEAT_T) {
  597. lcd_puts_P(PSTR(": "));
  598. lcd_print(custom_message_state); //seconds
  599. lcd_print(' ');
  600. }
  601. break;
  602. case CustomMsg::Resuming: //Resuming
  603. lcd_puts_at_P(0, 3, _T(MSG_RESUMING_PRINT));
  604. break;
  605. }
  606. }
  607. // Fill the rest of line to have nice and clean output
  608. for(int fillspace = 0; fillspace < LCD_WIDTH; fillspace++)
  609. if ((lcd_status_message[fillspace] <= 31 ))
  610. lcd_print(' ');
  611. }
  612. //! @brief Show Status Screen
  613. //!
  614. //! @code{.unparsed}
  615. //! |01234567890123456789|
  616. //! |N 000/000D Z000.0 |
  617. //! |B 000/000D F100% |
  618. //! |USB100% T0 t--:-- |
  619. //! |Status line.........|
  620. //! ----------------------
  621. //! N - nozzle temp symbol LCD_STR_THERMOMETER
  622. //! D - Degree sysmbol LCD_STR_DEGREE
  623. //! B - bed temp symbol LCD_STR_BEDTEMP
  624. //! F - feedrate symbol LCD_STR_FEEDRATE
  625. //! t - clock symbol LCD_STR_THERMOMETER
  626. //! @endcode
  627. void lcdui_print_status_screen(void)
  628. {
  629. lcd_set_cursor(0, 0); //line 0
  630. //Print the hotend temperature (9 chars total)
  631. lcdui_print_temp(LCD_STR_THERMOMETER[0], (int)(degHotend(0) + 0.5), (int)(degTargetHotend(0) + 0.5));
  632. lcd_space(3); //3 spaces
  633. //Print Z-coordinate (8 chars total)
  634. lcdui_print_Z_coord();
  635. lcd_set_cursor(0, 1); //line 1
  636. //Print the Bed temperature (9 chars total)
  637. lcdui_print_temp(LCD_STR_BEDTEMP[0], (int)(degBed() + 0.5), (int)(degTargetBed() + 0.5));
  638. lcd_space(3); //3 spaces
  639. #ifdef PLANNER_DIAGNOSTICS
  640. //Print planner diagnostics (8 chars)
  641. lcdui_print_planner_diag();
  642. #else // PLANNER_DIAGNOSTICS
  643. //Print Feedrate (8 chars)
  644. lcdui_print_feedrate();
  645. #endif // PLANNER_DIAGNOSTICS
  646. lcd_set_cursor(0, 2); //line 2
  647. //Print SD status (7 chars)
  648. lcdui_print_percent_done();
  649. if (mmu_enabled)
  650. //Print extruder status (5 chars)
  651. lcdui_print_extruder();
  652. else if (farm_mode)
  653. //Print farm number (5 chars)
  654. lcdui_print_farm();
  655. else
  656. lcd_space(5); //5 spaces
  657. #ifdef CMD_DIAGNOSTICS
  658. //Print cmd queue diagnostics (8chars)
  659. lcdui_print_cmd_diag();
  660. #else
  661. //Print time (8chars)
  662. lcdui_print_time();
  663. #endif //CMD_DIAGNOSTICS
  664. lcd_set_cursor(0, 3); //line 3
  665. #ifndef DEBUG_DISABLE_LCD_STATUS_LINE
  666. lcdui_print_status_line();
  667. #endif //DEBUG_DISABLE_LCD_STATUS_LINE
  668. }
  669. // Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent
  670. void lcd_status_screen() // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
  671. {
  672. if (firstrun == 1)
  673. {
  674. firstrun = 0;
  675. if(lcd_status_message_level == 0)
  676. {
  677. strncpy_P(lcd_status_message, _T(WELCOME_MSG), LCD_WIDTH);
  678. lcd_finishstatus();
  679. }
  680. if (eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME) == 255 && eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME + 1) == 255 && eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME + 2) == 255 && eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME + 3) == 255)
  681. {
  682. eeprom_update_dword((uint32_t *)EEPROM_TOTALTIME, 0);
  683. eeprom_update_dword((uint32_t *)EEPROM_FILAMENTUSED, 0);
  684. }
  685. }
  686. #ifdef ULTIPANEL_FEEDMULTIPLY
  687. // Dead zone at 100% feedrate
  688. if ((feedmultiply < 100 && (feedmultiply + int(lcd_encoder)) > 100) ||
  689. (feedmultiply > 100 && (feedmultiply + int(lcd_encoder)) < 100))
  690. {
  691. lcd_encoder = 0;
  692. feedmultiply = 100;
  693. }
  694. if (feedmultiply == 100 && int(lcd_encoder) > ENCODER_FEEDRATE_DEADZONE)
  695. {
  696. feedmultiply += int(lcd_encoder) - ENCODER_FEEDRATE_DEADZONE;
  697. lcd_encoder = 0;
  698. }
  699. else if (feedmultiply == 100 && int(lcd_encoder) < -ENCODER_FEEDRATE_DEADZONE)
  700. {
  701. feedmultiply += int(lcd_encoder) + ENCODER_FEEDRATE_DEADZONE;
  702. lcd_encoder = 0;
  703. }
  704. else if (feedmultiply != 100)
  705. {
  706. feedmultiply += int(lcd_encoder);
  707. lcd_encoder = 0;
  708. }
  709. #endif //ULTIPANEL_FEEDMULTIPLY
  710. if (feedmultiply < 10)
  711. feedmultiply = 10;
  712. else if (feedmultiply > 999)
  713. feedmultiply = 999;
  714. if (lcd_status_update_delay)
  715. lcd_status_update_delay--;
  716. else
  717. lcd_draw_update = 1;
  718. if (lcd_draw_update)
  719. {
  720. ReInitLCD++;
  721. if (ReInitLCD == 30)
  722. {
  723. lcd_refresh(); // to maybe revive the LCD if static electricity killed it.
  724. ReInitLCD = 0 ;
  725. }
  726. else
  727. {
  728. if ((ReInitLCD % 10) == 0)
  729. lcd_refresh_noclear(); //to maybe revive the LCD if static electricity killed it.
  730. }
  731. lcdui_print_status_screen();
  732. if (farm_mode)
  733. {
  734. farm_timer--;
  735. if (farm_timer < 1)
  736. {
  737. farm_timer = 10;
  738. prusa_statistics(0);
  739. }
  740. switch (farm_timer)
  741. {
  742. case 8:
  743. prusa_statistics(21);
  744. if(loading_flag)
  745. prusa_statistics(22);
  746. break;
  747. case 5:
  748. if (IS_SD_PRINTING)
  749. prusa_statistics(20);
  750. break;
  751. }
  752. } // end of farm_mode
  753. lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */
  754. if (lcd_commands_type != LcdCommands::Idle)
  755. lcd_commands();
  756. } // end of lcd_draw_update
  757. bool current_click = LCD_CLICKED;
  758. if (ignore_click)
  759. {
  760. if (wait_for_unclick)
  761. {
  762. if (!current_click)
  763. ignore_click = wait_for_unclick = false;
  764. else
  765. current_click = false;
  766. }
  767. else if (current_click)
  768. {
  769. lcd_quick_feedback();
  770. wait_for_unclick = true;
  771. current_click = false;
  772. }
  773. }
  774. if (current_click
  775. && ( menu_block_entering_on_serious_errors == SERIOUS_ERR_NONE ) // or a serious error blocks entering the menu
  776. )
  777. {
  778. menu_depth = 0; //redundant, as already done in lcd_return_to_status(), just to be sure
  779. menu_submenu(lcd_main_menu);
  780. lcd_refresh(); // to maybe revive the LCD if static electricity killed it.
  781. }
  782. }
  783. void lcd_commands()
  784. {
  785. if (lcd_commands_type == LcdCommands::LongPause)
  786. {
  787. if (!blocks_queued() && !homing_flag)
  788. {
  789. lcd_setstatuspgm(_i("Print paused"));////MSG_PRINT_PAUSED c=20
  790. lcd_commands_type = LcdCommands::Idle;
  791. lcd_commands_step = 0;
  792. long_pause();
  793. }
  794. }
  795. #ifdef SNMM
  796. if (lcd_commands_type == LcdCommands::Layer1Cal)
  797. {
  798. char cmd1[30];
  799. float width = 0.4;
  800. float length = 20 - width;
  801. float extr = count_e(0.2, width, length);
  802. float extr_short_segment = count_e(0.2, width, width);
  803. if (lcd_commands_step>1) lcd_timeoutToStatus.start(); //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen
  804. if (lcd_commands_step == 0)
  805. {
  806. lcd_commands_step = 10;
  807. }
  808. if (lcd_commands_step == 10 && !blocks_queued() && cmd_buffer_empty())
  809. {
  810. enquecommand_P(PSTR("M107"));
  811. enquecommand_P(PSTR("M104 S" STRINGIFY(PLA_PREHEAT_HOTEND_TEMP)));
  812. enquecommand_P(PSTR("M140 S" STRINGIFY(PLA_PREHEAT_HPB_TEMP)));
  813. enquecommand_P(PSTR("M190 S" STRINGIFY(PLA_PREHEAT_HPB_TEMP)));
  814. enquecommand_P(PSTR("M109 S" STRINGIFY(PLA_PREHEAT_HOTEND_TEMP)));
  815. enquecommand_P(PSTR("T0"));
  816. enquecommand_P(_T(MSG_M117_V2_CALIBRATION));
  817. enquecommand_P(PSTR("G87")); //sets calibration status
  818. enquecommand_P(PSTR("G28"));
  819. enquecommand_P(PSTR("G21")); //set units to millimeters
  820. enquecommand_P(PSTR("G90")); //use absolute coordinates
  821. enquecommand_P(PSTR("M83")); //use relative distances for extrusion
  822. enquecommand_P(PSTR("G92 E0"));
  823. enquecommand_P(PSTR("M203 E100"));
  824. enquecommand_P(PSTR("M92 E140"));
  825. lcd_commands_step = 9;
  826. }
  827. if (lcd_commands_step == 9 && !blocks_queued() && cmd_buffer_empty())
  828. {
  829. lcd_timeoutToStatus.start();
  830. enquecommand_P(PSTR("G1 Z0.250 F7200.000"));
  831. enquecommand_P(PSTR("G1 X50.0 E80.0 F1000.0"));
  832. enquecommand_P(PSTR("G1 X160.0 E20.0 F1000.0"));
  833. enquecommand_P(PSTR("G1 Z0.200 F7200.000"));
  834. enquecommand_P(PSTR("G1 X220.0 E13 F1000.0"));
  835. enquecommand_P(PSTR("G1 X240.0 E0 F1000.0"));
  836. enquecommand_P(PSTR("G92 E0.0"));
  837. enquecommand_P(PSTR("G21"));
  838. enquecommand_P(PSTR("G90"));
  839. enquecommand_P(PSTR("M83"));
  840. enquecommand_P(PSTR("G1 E-4 F2100.00000"));
  841. enquecommand_P(PSTR("G1 Z0.150 F7200.000"));
  842. enquecommand_P(PSTR("M204 S1000"));
  843. enquecommand_P(PSTR("G1 F4000"));
  844. lcd_clear();
  845. menu_goto(lcd_babystep_z, 0, false, true);
  846. lcd_commands_step = 8;
  847. }
  848. if (lcd_commands_step == 8 && !blocks_queued() && cmd_buffer_empty()) //draw meander
  849. {
  850. lcd_timeoutToStatus.start();
  851. enquecommand_P(PSTR("G1 X50 Y155"));
  852. enquecommand_P(PSTR("G1 X60 Y155 E4"));
  853. enquecommand_P(PSTR("G1 F1080"));
  854. enquecommand_P(PSTR("G1 X75 Y155 E2.5"));
  855. enquecommand_P(PSTR("G1 X100 Y155 E2"));
  856. enquecommand_P(PSTR("G1 X200 Y155 E2.62773"));
  857. enquecommand_P(PSTR("G1 X200 Y135 E0.66174"));
  858. enquecommand_P(PSTR("G1 X50 Y135 E3.62773"));
  859. enquecommand_P(PSTR("G1 X50 Y115 E0.49386"));
  860. enquecommand_P(PSTR("G1 X200 Y115 E3.62773"));
  861. enquecommand_P(PSTR("G1 X200 Y95 E0.49386"));
  862. enquecommand_P(PSTR("G1 X50 Y95 E3.62773"));
  863. enquecommand_P(PSTR("G1 X50 Y75 E0.49386"));
  864. enquecommand_P(PSTR("G1 X200 Y75 E3.62773"));
  865. enquecommand_P(PSTR("G1 X200 Y55 E0.49386"));
  866. enquecommand_P(PSTR("G1 X50 Y55 E3.62773"));
  867. lcd_commands_step = 7;
  868. }
  869. if (lcd_commands_step == 7 && !blocks_queued() && cmd_buffer_empty())
  870. {
  871. lcd_timeoutToStatus.start();
  872. strcpy(cmd1, "G1 X50 Y35 E");
  873. strcat(cmd1, ftostr43(extr));
  874. enquecommand(cmd1);
  875. for (int i = 0; i < 4; i++) {
  876. strcpy(cmd1, "G1 X70 Y");
  877. strcat(cmd1, ftostr32(35 - i*width * 2));
  878. strcat(cmd1, " E");
  879. strcat(cmd1, ftostr43(extr));
  880. enquecommand(cmd1);
  881. strcpy(cmd1, "G1 Y");
  882. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  883. strcat(cmd1, " E");
  884. strcat(cmd1, ftostr43(extr_short_segment));
  885. enquecommand(cmd1);
  886. strcpy(cmd1, "G1 X50 Y");
  887. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  888. strcat(cmd1, " E");
  889. strcat(cmd1, ftostr43(extr));
  890. enquecommand(cmd1);
  891. strcpy(cmd1, "G1 Y");
  892. strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
  893. strcat(cmd1, " E");
  894. strcat(cmd1, ftostr43(extr_short_segment));
  895. enquecommand(cmd1);
  896. }
  897. lcd_commands_step = 6;
  898. }
  899. if (lcd_commands_step == 6 && !blocks_queued() && cmd_buffer_empty())
  900. {
  901. lcd_timeoutToStatus.start();
  902. for (int i = 4; i < 8; i++) {
  903. strcpy(cmd1, "G1 X70 Y");
  904. strcat(cmd1, ftostr32(35 - i*width * 2));
  905. strcat(cmd1, " E");
  906. strcat(cmd1, ftostr43(extr));
  907. enquecommand(cmd1);
  908. strcpy(cmd1, "G1 Y");
  909. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  910. strcat(cmd1, " E");
  911. strcat(cmd1, ftostr43(extr_short_segment));
  912. enquecommand(cmd1);
  913. strcpy(cmd1, "G1 X50 Y");
  914. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  915. strcat(cmd1, " E");
  916. strcat(cmd1, ftostr43(extr));
  917. enquecommand(cmd1);
  918. strcpy(cmd1, "G1 Y");
  919. strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
  920. strcat(cmd1, " E");
  921. strcat(cmd1, ftostr43(extr_short_segment));
  922. enquecommand(cmd1);
  923. }
  924. lcd_commands_step = 5;
  925. }
  926. if (lcd_commands_step == 5 && !blocks_queued() && cmd_buffer_empty())
  927. {
  928. lcd_timeoutToStatus.start();
  929. for (int i = 8; i < 12; i++) {
  930. strcpy(cmd1, "G1 X70 Y");
  931. strcat(cmd1, ftostr32(35 - i*width * 2));
  932. strcat(cmd1, " E");
  933. strcat(cmd1, ftostr43(extr));
  934. enquecommand(cmd1);
  935. strcpy(cmd1, "G1 Y");
  936. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  937. strcat(cmd1, " E");
  938. strcat(cmd1, ftostr43(extr_short_segment));
  939. enquecommand(cmd1);
  940. strcpy(cmd1, "G1 X50 Y");
  941. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  942. strcat(cmd1, " E");
  943. strcat(cmd1, ftostr43(extr));
  944. enquecommand(cmd1);
  945. strcpy(cmd1, "G1 Y");
  946. strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
  947. strcat(cmd1, " E");
  948. strcat(cmd1, ftostr43(extr_short_segment));
  949. enquecommand(cmd1);
  950. }
  951. lcd_commands_step = 4;
  952. }
  953. if (lcd_commands_step == 4 && !blocks_queued() && cmd_buffer_empty())
  954. {
  955. lcd_timeoutToStatus.start();
  956. for (int i = 12; i < 16; i++) {
  957. strcpy(cmd1, "G1 X70 Y");
  958. strcat(cmd1, ftostr32(35 - i*width * 2));
  959. strcat(cmd1, " E");
  960. strcat(cmd1, ftostr43(extr));
  961. enquecommand(cmd1);
  962. strcpy(cmd1, "G1 Y");
  963. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  964. strcat(cmd1, " E");
  965. strcat(cmd1, ftostr43(extr_short_segment));
  966. enquecommand(cmd1);
  967. strcpy(cmd1, "G1 X50 Y");
  968. strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
  969. strcat(cmd1, " E");
  970. strcat(cmd1, ftostr43(extr));
  971. enquecommand(cmd1);
  972. strcpy(cmd1, "G1 Y");
  973. strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
  974. strcat(cmd1, " E");
  975. strcat(cmd1, ftostr43(extr_short_segment));
  976. enquecommand(cmd1);
  977. }
  978. lcd_commands_step = 3;
  979. }
  980. if (lcd_commands_step == 3 && !blocks_queued() && cmd_buffer_empty())
  981. {
  982. lcd_timeoutToStatus.start();
  983. enquecommand_P(PSTR("G1 E-0.07500 F2100.00000"));
  984. enquecommand_P(PSTR("G4 S0"));
  985. enquecommand_P(PSTR("G1 E-4 F2100.00000"));
  986. enquecommand_P(PSTR("G1 Z0.5 F7200.000"));
  987. enquecommand_P(PSTR("G1 X245 Y1"));
  988. enquecommand_P(PSTR("G1 X240 E4"));
  989. enquecommand_P(PSTR("G1 F4000"));
  990. enquecommand_P(PSTR("G1 X190 E2.7"));
  991. enquecommand_P(PSTR("G1 F4600"));
  992. enquecommand_P(PSTR("G1 X110 E2.8"));
  993. enquecommand_P(PSTR("G1 F5200"));
  994. enquecommand_P(PSTR("G1 X40 E3"));
  995. enquecommand_P(PSTR("G1 E-15.0000 F5000"));
  996. enquecommand_P(PSTR("G1 E-50.0000 F5400"));
  997. enquecommand_P(PSTR("G1 E-15.0000 F3000"));
  998. enquecommand_P(PSTR("G1 E-12.0000 F2000"));
  999. enquecommand_P(PSTR("G1 F1600"));
  1000. lcd_commands_step = 2;
  1001. }
  1002. if (lcd_commands_step == 2 && !blocks_queued() && cmd_buffer_empty())
  1003. {
  1004. lcd_timeoutToStatus.start();
  1005. enquecommand_P(PSTR("G1 X0 Y1 E3.0000"));
  1006. enquecommand_P(PSTR("G1 X50 Y1 E-5.0000"));
  1007. enquecommand_P(PSTR("G1 F2000"));
  1008. enquecommand_P(PSTR("G1 X0 Y1 E5.0000"));
  1009. enquecommand_P(PSTR("G1 X50 Y1 E-5.0000"));
  1010. enquecommand_P(PSTR("G1 F2400"));
  1011. enquecommand_P(PSTR("G1 X0 Y1 E5.0000"));
  1012. enquecommand_P(PSTR("G1 X50 Y1 E-5.0000"));
  1013. enquecommand_P(PSTR("G1 F2400"));
  1014. enquecommand_P(PSTR("G1 X0 Y1 E5.0000"));
  1015. enquecommand_P(PSTR("G1 X50 Y1 E-3.0000"));
  1016. enquecommand_P(PSTR("G4 S0"));
  1017. enquecommand_P(PSTR("M107"));
  1018. enquecommand_P(PSTR("M104 S0"));
  1019. enquecommand_P(PSTR("M140 S0"));
  1020. enquecommand_P(PSTR("G1 X10 Y180 F4000"));
  1021. enquecommand_P(PSTR("G1 Z10 F1300.000"));
  1022. enquecommand_P(PSTR("M84"));
  1023. lcd_commands_step = 1;
  1024. }
  1025. if (lcd_commands_step == 1 && !blocks_queued() && cmd_buffer_empty())
  1026. {
  1027. lcd_setstatuspgm(_T(WELCOME_MSG));
  1028. lcd_commands_step = 0;
  1029. lcd_commands_type = 0;
  1030. if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) == 1) {
  1031. lcd_wizard(WizState::RepeatLay1Cal);
  1032. }
  1033. }
  1034. }
  1035. #else //if not SNMM
  1036. if (lcd_commands_type == LcdCommands::Layer1Cal)
  1037. {
  1038. char cmd1[30];
  1039. if(lcd_commands_step>1) lcd_timeoutToStatus.start(); //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen
  1040. if (!blocks_queued() && cmd_buffer_empty() && !saved_printing)
  1041. {
  1042. switch(lcd_commands_step)
  1043. {
  1044. case 0:
  1045. lcd_commands_step = 11;
  1046. break;
  1047. case 11:
  1048. lay1cal_wait_preheat();
  1049. lcd_commands_step = 10;
  1050. break;
  1051. case 10:
  1052. lay1cal_load_filament(cmd1, lay1cal_filament);
  1053. lcd_commands_step = 9;
  1054. break;
  1055. case 9:
  1056. lcd_clear();
  1057. menu_depth = 0;
  1058. menu_submenu(lcd_babystep_z);
  1059. lay1cal_intro_line();
  1060. lcd_commands_step = 8;
  1061. break;
  1062. case 8:
  1063. lay1cal_before_meander();
  1064. lcd_commands_step = 7;
  1065. break;
  1066. case 7:
  1067. lay1cal_meander(cmd1);
  1068. lcd_commands_step = 6;
  1069. break;
  1070. case 6:
  1071. for (uint8_t i = 0; i < 4; i++)
  1072. {
  1073. lay1cal_square(cmd1, i);
  1074. }
  1075. lcd_commands_step = 5;
  1076. break;
  1077. case 5:
  1078. for (uint8_t i = 4; i < 8; i++)
  1079. {
  1080. lay1cal_square(cmd1, i);
  1081. }
  1082. lcd_commands_step = 4;
  1083. break;
  1084. case 4:
  1085. for (uint8_t i = 8; i < 12; i++)
  1086. {
  1087. lay1cal_square(cmd1, i);
  1088. }
  1089. lcd_commands_step = 3;
  1090. break;
  1091. case 3:
  1092. for (uint8_t i = 12; i < 16; i++)
  1093. {
  1094. lay1cal_square(cmd1, i);
  1095. }
  1096. lcd_commands_step = 2;
  1097. break;
  1098. case 2:
  1099. enquecommand_P(PSTR("M107")); //turn off printer fan
  1100. enquecommand_P(PSTR("G1 E-0.07500 F2100.00000")); //retract
  1101. enquecommand_P(PSTR("M104 S0")); // turn off temperature
  1102. enquecommand_P(PSTR("M140 S0")); // turn off heatbed
  1103. enquecommand_P(PSTR("G1 Z10 F1300.000")); //lift Z
  1104. enquecommand_P(PSTR("G1 X10 Y180 F4000")); //Go to parking position
  1105. if (mmu_enabled) enquecommand_P(PSTR("M702 C")); //unload from nozzle
  1106. enquecommand_P(PSTR("M84"));// disable motors
  1107. forceMenuExpire = true; //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen
  1108. lcd_commands_step = 1;
  1109. break;
  1110. case 1:
  1111. lcd_setstatuspgm(_T(WELCOME_MSG));
  1112. lcd_commands_step = 0;
  1113. lcd_commands_type = LcdCommands::Idle;
  1114. if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) == 1)
  1115. {
  1116. lcd_wizard(WizState::RepeatLay1Cal);
  1117. }
  1118. break;
  1119. }
  1120. }
  1121. }
  1122. #endif // not SNMM
  1123. if (lcd_commands_type == LcdCommands::FarmModeConfirm) /// farm mode confirm
  1124. {
  1125. if (lcd_commands_step == 0) { lcd_commands_step = 6; }
  1126. if (lcd_commands_step == 1 && !blocks_queued())
  1127. {
  1128. lcd_commands_step = 0;
  1129. lcd_commands_type = LcdCommands::Idle;
  1130. }
  1131. if (lcd_commands_step == 2 && !blocks_queued())
  1132. {
  1133. lcd_commands_step = 1;
  1134. }
  1135. if (lcd_commands_step == 3 && !blocks_queued())
  1136. {
  1137. lcd_commands_step = 2;
  1138. }
  1139. if (lcd_commands_step == 4 && !blocks_queued())
  1140. {
  1141. enquecommand_P(PSTR("G90"));
  1142. enquecommand_P(PSTR("G1 X" STRINGIFY(X_CANCEL_POS) " Y" STRINGIFY(Y_CANCEL_POS) " E0 F7000"));
  1143. lcd_commands_step = 3;
  1144. }
  1145. if (lcd_commands_step == 5 && !blocks_queued())
  1146. {
  1147. lcd_commands_step = 4;
  1148. }
  1149. if (lcd_commands_step == 6 && !blocks_queued())
  1150. {
  1151. enquecommand_P(PSTR("G91"));
  1152. enquecommand_P(PSTR("G1 Z15 F1500"));
  1153. st_synchronize();
  1154. #ifdef SNMM
  1155. lcd_commands_step = 7;
  1156. #else
  1157. lcd_commands_step = 5;
  1158. #endif
  1159. }
  1160. }
  1161. if (lcd_commands_type == LcdCommands::PidExtruder) {
  1162. char cmd1[30];
  1163. if (lcd_commands_step == 0) {
  1164. custom_message_type = CustomMsg::PidCal;
  1165. custom_message_state = 1;
  1166. lcd_draw_update = 3;
  1167. lcd_commands_step = 3;
  1168. }
  1169. if (lcd_commands_step == 3 && !blocks_queued()) { //PID calibration
  1170. strcpy(cmd1, "M303 E0 S");
  1171. strcat(cmd1, ftostr3(pid_temp));
  1172. // setting the correct target temperature (for visualization) is done in PID_autotune
  1173. enquecommand(cmd1);
  1174. lcd_setstatuspgm(_i("PID cal."));////MSG_PID_RUNNING c=20
  1175. lcd_commands_step = 2;
  1176. }
  1177. if (lcd_commands_step == 2 && pid_tuning_finished) { //saving to eeprom
  1178. pid_tuning_finished = false;
  1179. custom_message_state = 0;
  1180. lcd_setstatuspgm(_i("PID cal. finished"));////MSG_PID_FINISHED c=20
  1181. setAllTargetHotends(0); // reset all hotends temperature including the number displayed on the main screen
  1182. if (_Kp != 0 || _Ki != 0 || _Kd != 0) {
  1183. strcpy(cmd1, "M301 P");
  1184. strcat(cmd1, ftostr32(_Kp));
  1185. strcat(cmd1, " I");
  1186. strcat(cmd1, ftostr32(_Ki));
  1187. strcat(cmd1, " D");
  1188. strcat(cmd1, ftostr32(_Kd));
  1189. enquecommand(cmd1);
  1190. enquecommand_P(PSTR("M500"));
  1191. }
  1192. else {
  1193. SERIAL_ECHOPGM("Invalid PID cal. results. Not stored to EEPROM.");
  1194. }
  1195. display_time = _millis();
  1196. lcd_commands_step = 1;
  1197. }
  1198. if ((lcd_commands_step == 1) && ((_millis()- display_time)>2000)) { //calibration finished message
  1199. lcd_setstatuspgm(_T(WELCOME_MSG));
  1200. custom_message_type = CustomMsg::Status;
  1201. pid_temp = DEFAULT_PID_TEMP;
  1202. lcd_commands_step = 0;
  1203. lcd_commands_type = LcdCommands::Idle;
  1204. }
  1205. }
  1206. }
  1207. void lcd_return_to_status()
  1208. {
  1209. lcd_refresh(); // to maybe revive the LCD if static electricity killed it.
  1210. menu_goto(lcd_status_screen, 0, false, true);
  1211. menu_depth = 0;
  1212. eFilamentAction = FilamentAction::None; // i.e. non-autoLoad
  1213. }
  1214. //! @brief Pause print, disable nozzle heater, move to park position, send host action "paused"
  1215. void lcd_pause_print()
  1216. {
  1217. stop_and_save_print_to_ram(0.0, -default_retraction);
  1218. lcd_return_to_status();
  1219. isPrintPaused = true;
  1220. if (LcdCommands::Idle == lcd_commands_type) {
  1221. lcd_commands_type = LcdCommands::LongPause;
  1222. }
  1223. SERIAL_PROTOCOLLNRPGM(MSG_OCTOPRINT_PAUSED);
  1224. }
  1225. //! @brief Send host action "pause"
  1226. void lcd_pause_usb_print()
  1227. {
  1228. SERIAL_PROTOCOLLNRPGM(MSG_OCTOPRINT_PAUSE);
  1229. }
  1230. float move_menu_scale;
  1231. static void lcd_move_menu_axis();
  1232. /* Menu implementation */
  1233. static void lcd_cooldown()
  1234. {
  1235. setAllTargetHotends(0);
  1236. setTargetBed(0);
  1237. fanSpeed = 0;
  1238. lcd_return_to_status();
  1239. }
  1240. //! @brief append text label with a colon and format it into a fixed size output buffer
  1241. //! It would have been much easier if there was a ':' in the labels.
  1242. //! But since the texts like Bed, Nozzle and PINDA are used in other places
  1243. //! it is better to reuse these texts even though it requires some extra formatting code.
  1244. //! @param [in] ipgmLabel pointer to string in PROGMEM
  1245. //! @param [out] pointer to string in RAM which will receive the formatted text. Must be allocated to appropriate size
  1246. //! @param [in] dstSize allocated length of dst
  1247. static void pgmtext_with_colon(const char *ipgmLabel, char *dst, uint8_t dstSize){
  1248. uint8_t i = 0;
  1249. for(; i < dstSize - 2; ++i){ // 2 byte less than buffer, we'd be adding a ':' to the end
  1250. uint8_t b = pgm_read_byte(ipgmLabel + i);
  1251. if( ! b )
  1252. break;
  1253. dst[i] = b;
  1254. }
  1255. dst[i] = ':'; // append the colon
  1256. ++i;
  1257. for(; i < dstSize - 1; ++i) // fill the rest with spaces
  1258. dst[i] = ' ';
  1259. dst[dstSize-1] = '\0'; // terminate the string properly
  1260. }
  1261. //! @brief Show Extruder Info
  1262. //!
  1263. //! @code{.unparsed}
  1264. //! |01234567890123456789|
  1265. //! |Nozzle FAN: 0000 RPM| MSG_NOZZLE_FAN c=10 SPEED c=3
  1266. //! |Print FAN: 0000 RPM| MSG_PRINT_FAN c=10 SPEED c=3
  1267. //! | |
  1268. //! | |
  1269. //! ----------------------
  1270. //! @endcode
  1271. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1272. void lcd_menu_extruder_info() // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
  1273. {
  1274. // Display Nozzle fan RPM
  1275. lcd_timeoutToStatus.stop(); //infinite timeout
  1276. lcd_home();
  1277. static const size_t maxChars = 12;
  1278. char nozzle[maxChars], print[maxChars];
  1279. pgmtext_with_colon(_i("Nozzle FAN"), nozzle, maxChars); ////MSG_NOZZLE_FAN c=10
  1280. pgmtext_with_colon(_i("Print FAN"), print, maxChars); ////MSG_PRINT_FAN c=10
  1281. lcd_printf_P(_N("%s %4d RPM\n" "%s %4d RPM\n"), nozzle, 60*fan_speed[0], print, 60*fan_speed[1] );
  1282. menu_back_if_clicked();
  1283. }
  1284. static uint16_t __attribute__((noinline)) clamp999(uint16_t v){
  1285. return v > 999 ? 999 : v;
  1286. }
  1287. //! @brief Show Fails Statistics MMU
  1288. //!
  1289. //! @code{.unparsed}
  1290. //! |01234567890123456789|
  1291. //! | Main | MSG_MAIN c=18
  1292. //! | Last print | MSG_LAST_PRINT c=18
  1293. //! | Total | MSG_TOTAL c=6
  1294. //! | |
  1295. //! ----------------------
  1296. //! @endcode
  1297. static void lcd_menu_fails_stats_mmu()
  1298. {
  1299. MENU_BEGIN();
  1300. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  1301. MENU_ITEM_SUBMENU_P(_T(MSG_LAST_PRINT), lcd_menu_fails_stats_mmu_print);
  1302. MENU_ITEM_SUBMENU_P(_T(MSG_TOTAL), lcd_menu_fails_stats_mmu_total);
  1303. MENU_END();
  1304. }
  1305. //! @brief Show Last Print Failures Statistics MMU
  1306. //!
  1307. //! @code{.unparsed}
  1308. //! |01234567890123456789|
  1309. //! |Last print failures | MSG_LAST_PRINT_FAILURES c=20
  1310. //! | MMU fails 000| MSG_MMU_FAILS c=15
  1311. //! | MMU load fails 000| MSG_MMU_LOAD_FAILS c=15
  1312. //! | |
  1313. //! ----------------------
  1314. //! @endcode
  1315. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1316. static void lcd_menu_fails_stats_mmu_print()
  1317. {
  1318. lcd_timeoutToStatus.stop(); //infinite timeout
  1319. lcd_home();
  1320. lcd_printf_P(PSTR("%S\n" " %-16.16S%-3d\n" " %-16.16S%-3d"),
  1321. _T(MSG_LAST_PRINT_FAILURES),
  1322. _T(MSG_MMU_FAILS), clamp999( eeprom_read_byte((uint8_t*)EEPROM_MMU_FAIL) ),
  1323. _T(MSG_MMU_LOAD_FAILS), clamp999( eeprom_read_byte((uint8_t*)EEPROM_MMU_LOAD_FAIL) ));
  1324. menu_back_if_clicked_fb();
  1325. }
  1326. //! @brief Show Total Failures Statistics MMU
  1327. //!
  1328. //! @code{.unparsed}
  1329. //! |01234567890123456789|
  1330. //! |Total failures | MSG_TOTAL_FAILURES c=20
  1331. //! | MMU fails 000| MSG_MMU_FAILS c=15
  1332. //! | MMU load fails 000| MSG_MMU_LOAD_FAILS c=15
  1333. //! | MMU power fails 000| MSG_MMU_POWER_FAILS c=15
  1334. //! ----------------------
  1335. //! @endcode
  1336. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1337. static void lcd_menu_fails_stats_mmu_total()
  1338. {
  1339. mmu_command(MmuCmd::S3);
  1340. lcd_timeoutToStatus.stop(); //infinite timeout
  1341. lcd_home();
  1342. lcd_printf_P(PSTR("%S\n" " %-16.16S%-3d\n" " %-16.16S%-3d\n" " %-16.16S%-3d"),
  1343. _T(MSG_TOTAL_FAILURES),
  1344. _T(MSG_MMU_FAILS), clamp999( eeprom_read_word((uint16_t*)EEPROM_MMU_FAIL_TOT) ),
  1345. _T(MSG_MMU_LOAD_FAILS), clamp999( eeprom_read_word((uint16_t*)EEPROM_MMU_LOAD_FAIL_TOT) ),
  1346. _i("MMU power fails"), clamp999( mmu_power_failures )); ////MSG_MMU_POWER_FAILS c=15
  1347. menu_back_if_clicked_fb();
  1348. }
  1349. #if defined(TMC2130) && defined(FILAMENT_SENSOR)
  1350. static const char failStatsFmt[] PROGMEM = "%S\n" " %-16.16S%-3d\n" " %-16.16S%-3d\n" " %-7.7SX %-3d Y %-3d";
  1351. //! @brief Show Total Failures Statistics MMU
  1352. //!
  1353. //! @code{.unparsed}
  1354. //! |01234567890123456789|
  1355. //! |Total failures | MSG_TOTAL_FAILURES c=20
  1356. //! | Power failures 000| MSG_POWER_FAILURES c=15
  1357. //! | Fil. runouts 000| MSG_FIL_RUNOUTS c=15
  1358. //! | Crash X:000 Y:000| MSG_CRASH c=7
  1359. //! ----------------------
  1360. //! @endcode
  1361. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1362. static void lcd_menu_fails_stats_total()
  1363. {
  1364. lcd_timeoutToStatus.stop(); //infinite timeout
  1365. lcd_home();
  1366. lcd_printf_P(failStatsFmt,
  1367. _T(MSG_TOTAL_FAILURES),
  1368. _T(MSG_POWER_FAILURES), clamp999( eeprom_read_word((uint16_t*)EEPROM_POWER_COUNT_TOT) ),
  1369. _T(MSG_FIL_RUNOUTS), clamp999( eeprom_read_word((uint16_t*)EEPROM_FERROR_COUNT_TOT) ),
  1370. _T(MSG_CRASH),
  1371. clamp999( eeprom_read_word((uint16_t*)EEPROM_CRASH_COUNT_X_TOT) ),
  1372. clamp999( eeprom_read_word((uint16_t*)EEPROM_CRASH_COUNT_Y_TOT) ));
  1373. menu_back_if_clicked_fb();
  1374. }
  1375. //! @brief Show Last Print Failures Statistics
  1376. //!
  1377. //! @code{.unparsed}
  1378. //! |01234567890123456789|
  1379. //! |Last print failures | MSG_LAST_PRINT_FAILURES c=20
  1380. //! | Power failures 000| MSG_POWER_FAILURES c=15
  1381. //! | Fil. runouts 000| MSG_FIL_RUNOUTS c=15
  1382. //! | Crash X 000 Y 000| MSG_CRASH c=7
  1383. //! ----------------------
  1384. //! @endcode
  1385. //! @brief Show Last Print Failures Statistics with PAT9125
  1386. //!
  1387. //! @code{.unparsed}
  1388. //! |01234567890123456789|
  1389. //! |Last print failures | MSG_LAST_PRINT_FAILURES c=20
  1390. //! | Power failures 000| MSG_POWER_FAILURES c=14
  1391. //! | Runouts H 000 S 000| MSG_RUNOUTS c=7
  1392. //! | Crash X:000 Y:000| MSG_CRASH c=7
  1393. //! ----------------------
  1394. //! @endcode
  1395. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1396. static void lcd_menu_fails_stats_print()
  1397. {
  1398. lcd_timeoutToStatus.stop(); //infinite timeout
  1399. uint8_t power = eeprom_read_byte((uint8_t*)EEPROM_POWER_COUNT);
  1400. uint8_t filam = eeprom_read_byte((uint8_t*)EEPROM_FERROR_COUNT);
  1401. uint8_t crashX = eeprom_read_byte((uint8_t*)EEPROM_CRASH_COUNT_X);
  1402. uint8_t crashY = eeprom_read_byte((uint8_t*)EEPROM_CRASH_COUNT_Y);
  1403. lcd_home();
  1404. #ifndef PAT9125
  1405. lcd_printf_P(failStatsFmt,
  1406. _T(MSG_LAST_PRINT_FAILURES),
  1407. _T(MSG_POWER_FAILURES), power,
  1408. _T(MSG_FIL_RUNOUTS), filam,
  1409. _T(MSG_CRASH), crashX, crashY);
  1410. #else
  1411. // On the MK3 include detailed PAT9125 statistics about soft failures
  1412. lcd_printf_P(PSTR("%S\n"
  1413. " %-16.16S%-3d\n"
  1414. " %-7.7S H %-3d S %-3d\n"
  1415. " %-7.7S X %-3d Y %-3d"),
  1416. _T(MSG_LAST_PRINT_FAILURES),
  1417. _T(MSG_POWER_FAILURES), power,
  1418. _i("Runouts"), filam, fsensor_softfail, //MSG_RUNOUTS c=7
  1419. _T(MSG_CRASH), crashX, crashY);
  1420. #endif
  1421. menu_back_if_clicked_fb();
  1422. }
  1423. //! @brief Open fail statistics menu
  1424. //!
  1425. //! This version of function is used, when there is filament sensor,
  1426. //! power failure and crash detection.
  1427. //! There are Last print and Total menu items.
  1428. //!
  1429. //! @code{.unparsed}
  1430. //! |01234567890123456789|
  1431. //! | Main | MSG_MAIN c=18
  1432. //! | Last print | MSG_LAST_PRINT c=18
  1433. //! | Total | MSG_TOTAL c=6
  1434. //! | |
  1435. //! ----------------------
  1436. //! @endcode
  1437. static void lcd_menu_fails_stats()
  1438. {
  1439. MENU_BEGIN();
  1440. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  1441. MENU_ITEM_SUBMENU_P(_T(MSG_LAST_PRINT), lcd_menu_fails_stats_print);
  1442. MENU_ITEM_SUBMENU_P(_T(MSG_TOTAL), lcd_menu_fails_stats_total);
  1443. MENU_END();
  1444. }
  1445. #elif defined(FILAMENT_SENSOR)
  1446. static const char failStatsFmt[] PROGMEM = "%S\n" " %-16.16S%-3d\n" "%S\n" " %-16.16S%-3d\n";
  1447. //!
  1448. //! @brief Print last print and total filament run outs
  1449. //!
  1450. //! This version of function is used, when there is filament sensor,
  1451. //! but no other sensors (e.g. power failure, crash detection).
  1452. //!
  1453. //! Example screen:
  1454. //! @code{.unparsed}
  1455. //! |01234567890123456789|
  1456. //! |Last print failures | MSG_LAST_PRINT_FAILURES c=20
  1457. //! | Fil. runouts 000| MSG_FIL_RUNOUTS c=15
  1458. //! |Total failures | MSG_TOTAL_FAILURES c=20
  1459. //! | Fil. runouts 000| MSG_FIL_RUNOUTS c=15
  1460. //! ----------------------
  1461. //! @endcode
  1462. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1463. static void lcd_menu_fails_stats()
  1464. {
  1465. lcd_timeoutToStatus.stop(); //infinite timeout
  1466. uint8_t filamentLast = eeprom_read_byte((uint8_t*)EEPROM_FERROR_COUNT);
  1467. uint16_t filamentTotal = clamp999( eeprom_read_word((uint16_t*)EEPROM_FERROR_COUNT_TOT) );
  1468. lcd_home();
  1469. lcd_printf_P(failStatsFmt,
  1470. _T(MSG_LAST_PRINT_FAILURES),
  1471. _T(MSG_FIL_RUNOUTS), filamentLast,
  1472. _T(MSG_TOTAL_FAILURES),
  1473. _T(MSG_FIL_RUNOUTS), filamentTotal);
  1474. menu_back_if_clicked();
  1475. }
  1476. #else
  1477. static void lcd_menu_fails_stats()
  1478. {
  1479. lcd_timeoutToStatus.stop(); //infinite timeout
  1480. MENU_BEGIN();
  1481. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  1482. MENU_END();
  1483. }
  1484. #endif //TMC2130
  1485. #ifdef DEBUG_BUILD
  1486. #ifdef DEBUG_STACK_MONITOR
  1487. extern uint16_t SP_min;
  1488. extern char* __malloc_heap_start;
  1489. extern char* __malloc_heap_end;
  1490. #endif //DEBUG_STACK_MONITOR
  1491. //! @brief Show Debug Information
  1492. //!
  1493. //! @code{.unparsed}
  1494. //! |01234567890123456789|
  1495. //! |RAM statistics | c=20
  1496. //! | SP_min: 0000| c=14
  1497. //! | heap_start: 0000| c=14
  1498. //! | heap_end: 0000| c=14
  1499. //! ----------------------
  1500. //! @endcode
  1501. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1502. static void lcd_menu_debug()
  1503. {
  1504. #ifdef DEBUG_STACK_MONITOR
  1505. lcd_home();
  1506. lcd_printf_P(PSTR("RAM statistics\n" ////c=20
  1507. " SP_min: 0x%04x\n" ////c=14
  1508. " heap_start: 0x%04x\n" ////c=14
  1509. " heap_end: 0x%04x"), SP_min, __malloc_heap_start, __malloc_heap_end); ////c=14
  1510. #endif //DEBUG_STACK_MONITOR
  1511. menu_back_if_clicked_fb();
  1512. }
  1513. #endif /* DEBUG_BUILD */
  1514. //! @brief common line print for lcd_menu_temperatures
  1515. //! @param [in] ipgmLabel pointer to string in PROGMEM
  1516. //! @param [in] value to be printed behind the label
  1517. static void lcd_menu_temperatures_line(const char *ipgmLabel, int value){
  1518. static const size_t maxChars = 15;
  1519. char tmp[maxChars];
  1520. pgmtext_with_colon(ipgmLabel, tmp, maxChars);
  1521. lcd_printf_P(PSTR(" %s%3d\x01 \n"), tmp, value); // no need to add -14.14 to string alignment
  1522. }
  1523. //! @brief Show Temperatures
  1524. //!
  1525. //! @code{.unparsed}
  1526. //! |01234567890123456789|
  1527. //! | Nozzle: 000D| MSG_NOZZLE c=14
  1528. //! | Bed: 000D| MSG_BEDc=14
  1529. //! | Ambient: 000D| MSG_AMBIENTc=14
  1530. //! | PINDA: 000D| MSG_PINDA c=14
  1531. //! ----------------------
  1532. //! D - Degree sysmbol LCD_STR_DEGREE
  1533. //! @endcode
  1534. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1535. static void lcd_menu_temperatures()
  1536. {
  1537. lcd_timeoutToStatus.stop(); //infinite timeout
  1538. lcd_home();
  1539. lcd_menu_temperatures_line( _T(MSG_NOZZLE), (int)current_temperature[0] ); ////MSG_NOZZLE
  1540. lcd_menu_temperatures_line( _T(MSG_BED), (int)current_temperature_bed ); ////MSG_BED
  1541. #ifdef AMBIENT_THERMISTOR
  1542. lcd_menu_temperatures_line( _i("Ambient"), (int)current_temperature_ambient ); ////MSG_AMBIENT
  1543. #endif //AMBIENT_THERMISTOR
  1544. #ifdef PINDA_THERMISTOR
  1545. lcd_menu_temperatures_line( _T(MSG_PINDA), (int)current_temperature_pinda ); ////MSG_PINDA
  1546. #endif //PINDA_THERMISTOR
  1547. menu_back_if_clicked();
  1548. }
  1549. #if defined (VOLT_BED_PIN) || defined (VOLT_PWR_PIN) || defined(IR_SENSOR_ANALOG)
  1550. #define VOLT_DIV_R1 10000
  1551. #define VOLT_DIV_R2 2370
  1552. #define VOLT_DIV_FAC ((float)VOLT_DIV_R2 / (VOLT_DIV_R2 + VOLT_DIV_R1))
  1553. //! @brief Show Voltages
  1554. //!
  1555. //! @code{.unparsed}
  1556. //! |01234567890123456789|
  1557. //! | |
  1558. //! | PWR: 00.0V | c=12
  1559. //! | Bed: 00.0V | c=12
  1560. //! | IR : 00.0V | c=12 optional
  1561. //! ----------------------
  1562. //! @endcode
  1563. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1564. static void lcd_menu_voltages()
  1565. {
  1566. lcd_timeoutToStatus.stop(); //infinite timeout
  1567. float volt_pwr = VOLT_DIV_REF * ((float)current_voltage_raw_pwr / (1023 * OVERSAMPLENR)) / VOLT_DIV_FAC;
  1568. float volt_bed = VOLT_DIV_REF * ((float)current_voltage_raw_bed / (1023 * OVERSAMPLENR)) / VOLT_DIV_FAC;
  1569. lcd_home();
  1570. lcd_printf_P(PSTR(" PWR: %4.1fV\n" " BED: %4.1fV"), volt_pwr, volt_bed);
  1571. #ifdef IR_SENSOR_ANALOG
  1572. lcd_printf_P(PSTR("\n IR : %3.1fV"), Raw2Voltage(current_voltage_raw_IR));
  1573. #endif //IR_SENSOR_ANALOG
  1574. menu_back_if_clicked();
  1575. }
  1576. #endif //defined (VOLT_BED_PIN) || defined (VOLT_PWR_PIN) || defined(IR_SENSOR_ANALOG)
  1577. #ifdef TMC2130
  1578. //! @brief Show Belt Status
  1579. //!
  1580. //! @code{.unparsed}
  1581. //! |01234567890123456789|
  1582. //! | Belt status | c=18
  1583. //! | X: 000 |
  1584. //! | Y: 000 |
  1585. //! | |
  1586. //! ----------------------
  1587. //! @endcode
  1588. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  1589. static void lcd_menu_belt_status()
  1590. {
  1591. lcd_home();
  1592. lcd_printf_P(PSTR("%S\n" " X %d\n" " Y %d"), _T(MSG_BELT_STATUS), eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_X)), eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_Y)));
  1593. menu_back_if_clicked();
  1594. }
  1595. #endif //TMC2130
  1596. #ifdef RESUME_DEBUG
  1597. extern void stop_and_save_print_to_ram(float z_move, float e_move);
  1598. extern void restore_print_from_ram_and_continue(float e_move);
  1599. static void lcd_menu_test_save()
  1600. {
  1601. stop_and_save_print_to_ram(10, -0.8);
  1602. }
  1603. static void lcd_menu_test_restore()
  1604. {
  1605. restore_print_from_ram_and_continue(0.8);
  1606. }
  1607. #endif //RESUME_DEBUG
  1608. //! @brief Show Preheat Menu
  1609. static void lcd_preheat_menu()
  1610. {
  1611. eFilamentAction = FilamentAction::Preheat;
  1612. lcd_generic_preheat_menu();
  1613. }
  1614. #ifdef MENU_DUMP
  1615. #include "xflash_dump.h"
  1616. static void lcd_dump_memory()
  1617. {
  1618. lcd_beeper_quick_feedback();
  1619. xfdump_dump();
  1620. lcd_return_to_status();
  1621. }
  1622. #endif //MENU_DUMP
  1623. #ifdef MENU_SERIAL_DUMP
  1624. #include "Dcodes.h"
  1625. static void lcd_serial_dump()
  1626. {
  1627. serial_dump_and_reset(dump_crash_reason::manual);
  1628. }
  1629. #endif //MENU_SERIAL_DUMP
  1630. #if defined(DEBUG_BUILD) && defined(EMERGENCY_HANDLERS)
  1631. #include <avr/wdt.h>
  1632. #ifdef WATCHDOG
  1633. static void lcd_wdr_crash()
  1634. {
  1635. while (1);
  1636. }
  1637. #endif
  1638. static uint8_t lcd_stack_crash_(uint8_t arg, uint32_t sp = 0)
  1639. {
  1640. // populate the stack with an increasing value for ease of testing
  1641. volatile uint16_t tmp __attribute__((unused)) = sp;
  1642. _delay(arg);
  1643. uint8_t ret = lcd_stack_crash_(arg, SP);
  1644. // required to avoid tail call elimination and to slow down the stack growth
  1645. _delay(ret);
  1646. return ret;
  1647. }
  1648. static void lcd_stack_crash()
  1649. {
  1650. #ifdef WATCHDOG
  1651. wdt_disable();
  1652. #endif
  1653. // delay choosen in order to hit the stack-check in the temperature isr reliably
  1654. lcd_stack_crash_(10);
  1655. }
  1656. #endif
  1657. //! @brief Show Support Menu
  1658. //!
  1659. //! @code{.unparsed}
  1660. //! |01234567890123456789|
  1661. //! | Main | MSG_MAIN c=18
  1662. //! | Firmware: | c=18
  1663. //! | 3.7.2.-2363 | c=16
  1664. //! | prusa3d.com | MSG_PRUSA3D
  1665. //! | forum.prusa3d.com | MSG_PRUSA3D_FORUM
  1666. //! | howto.prusa3d.com | MSG_PRUSA3D_HOWTO
  1667. //! | -------------- | STR_SEPARATOR
  1668. //! | 1_75mm_MK3 | FILAMENT_SIZE
  1669. //! | howto.prusa3d.com | ELECTRONICS
  1670. //! | howto.prusa3d.com | NOZZLE_TYPE
  1671. //! | -------------- | STR_SEPARATOR
  1672. //! | Date: | c=17
  1673. //! | MMM DD YYYY | __DATE__
  1674. //! | -------------- | STR_SEPARATOR
  1675. //! @endcode
  1676. //!
  1677. //! If MMU is connected
  1678. //!
  1679. //! @code{.unparsed}
  1680. //! | MMU2 connected | c=18
  1681. //! | FW: 1.0.6-7064523 |
  1682. //! @endcode
  1683. //!
  1684. //! If MMU is not connected
  1685. //!
  1686. //! @code{.unparsed}
  1687. //! | MMU2 N/A | c=18
  1688. //! @endcode
  1689. //!
  1690. //! If Flash Air is connected
  1691. //!
  1692. //! @code{.unparsed}
  1693. //! | -------------- | STR_SEPARATOR
  1694. //! | FlashAir IP Addr: | c=18
  1695. //! | 192.168.1.100 |
  1696. //! @endcode
  1697. //!
  1698. //! @code{.unparsed}
  1699. //! | -------------- | STR_SEPARATOR
  1700. //! | XYZ cal. details | MSG_XYZ_DETAILS c=18
  1701. //! | Extruder info | MSG_INFO_EXTRUDER
  1702. //! | XYZ cal. details | MSG_INFO_SENSORS
  1703. //! @endcode
  1704. //!
  1705. //! If TMC2130 defined
  1706. //!
  1707. //! @code{.unparsed}
  1708. //! | Belt status | MSG_BELT_STATUS
  1709. //! @endcode
  1710. //!
  1711. //! @code{.unparsed}
  1712. //! | Temperatures | MSG_MENU_TEMPERATURES
  1713. //! @endcode
  1714. //!
  1715. //! If Voltage Bed and PWR Pin are defined
  1716. //!
  1717. //! @code{.unparsed}
  1718. //! | Voltages | MSG_MENU_VOLTAGES
  1719. //! @endcode
  1720. //!
  1721. //!
  1722. //! If DEBUG_BUILD is defined
  1723. //!
  1724. //! @code{.unparsed}
  1725. //! | Debug | c=18
  1726. //! @endcode
  1727. //! ----------------------
  1728. //! @endcode
  1729. static void lcd_support_menu()
  1730. {
  1731. typedef struct
  1732. { // 22bytes total
  1733. int8_t status; // 1byte
  1734. bool is_flash_air; // 1byte
  1735. uint32_t ip; // 4bytes
  1736. char ip_str[IP4_STR_SIZE]; // 16bytes
  1737. } _menu_data_t;
  1738. static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
  1739. _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
  1740. if (_md->status == 0 || lcd_draw_update == 2)
  1741. {
  1742. // Menu was entered or SD card status has changed (plugged in or removed).
  1743. // Initialize its status.
  1744. _md->status = 1;
  1745. _md->is_flash_air = card.ToshibaFlashAir_isEnabled();
  1746. if (_md->is_flash_air) {
  1747. card.ToshibaFlashAir_GetIP((uint8_t*)(&_md->ip)); // ip == 0 if it failed
  1748. }
  1749. } else if (_md->is_flash_air && _md->ip == 0 && ++ _md->status == 16)
  1750. {
  1751. // Waiting for the FlashAir card to get an IP address from a router. Force an update.
  1752. _md->status = 0;
  1753. }
  1754. MENU_BEGIN();
  1755. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  1756. MENU_ITEM_BACK_P(PSTR("Firmware:"));
  1757. MENU_ITEM_BACK_P(PSTR(" " FW_VERSION_FULL));
  1758. #if (FW_DEV_VERSION != FW_VERSION_GOLD) && (FW_DEV_VERSION != FW_VERSION_RC)
  1759. MENU_ITEM_BACK_P(PSTR(" repo " FW_REPOSITORY));
  1760. #endif
  1761. // Ideally this block would be optimized out by the compiler.
  1762. /* const uint8_t fw_string_len = strlen_P(FW_VERSION_STR_P());
  1763. if (fw_string_len < 6) {
  1764. MENU_ITEM_BACK_P(PSTR(MSG_FW_VERSION " - " FW_version));
  1765. } else {
  1766. MENU_ITEM_BACK_P(PSTR("FW - " FW_version));
  1767. }*/
  1768. MENU_ITEM_BACK_P(_n("prusa3d.com"));////MSG_PRUSA3D c=18
  1769. MENU_ITEM_BACK_P(_n("forum.prusa3d.com"));////MSG_PRUSA3D_FORUM c=18
  1770. MENU_ITEM_BACK_P(_n("howto.prusa3d.com"));////MSG_PRUSA3D_HOWTO c=18
  1771. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1772. MENU_ITEM_BACK_P(PSTR(FILAMENT_SIZE));
  1773. MENU_ITEM_BACK_P(PSTR(ELECTRONICS));
  1774. MENU_ITEM_BACK_P(PSTR(NOZZLE_TYPE));
  1775. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1776. MENU_ITEM_BACK_P(_i("Date:"));////MSG_DATE c=17
  1777. MENU_ITEM_BACK_P(PSTR(__DATE__));
  1778. #ifdef IR_SENSOR_ANALOG
  1779. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1780. MENU_ITEM_BACK_P(PSTR("Fil. sensor v.:"));
  1781. MENU_ITEM_BACK_P(FsensorIRVersionText());
  1782. #endif // IR_SENSOR_ANALOG
  1783. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1784. if (mmu_enabled)
  1785. {
  1786. MENU_ITEM_BACK_P(_i("MMU2 connected")); ////MSG_MMU_CONNECTED c=18
  1787. MENU_ITEM_BACK_P(PSTR(" FW:")); ////c=17
  1788. if (((menu_item - 1) == menu_line) && lcd_draw_update)
  1789. {
  1790. lcd_set_cursor(6, menu_row);
  1791. if ((mmu_version > 0) && (mmu_buildnr > 0))
  1792. lcd_printf_P(PSTR("%d.%d.%d-%d"), mmu_version/100, mmu_version%100/10, mmu_version%10, mmu_buildnr);
  1793. else
  1794. lcd_puts_P(_i("unknown")); ////MSG_UNKNOWN c=13
  1795. }
  1796. }
  1797. else
  1798. MENU_ITEM_BACK_P(PSTR("MMU2 N/A"));
  1799. // Show the FlashAir IP address, if the card is available.
  1800. if (_md->is_flash_air) {
  1801. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1802. MENU_ITEM_BACK_P(PSTR("FlashAir IP Addr:")); ////MSG_FLASHAIR c=18
  1803. MENU_ITEM_BACK_P(PSTR(" "));
  1804. if (((menu_item - 1) == menu_line) && lcd_draw_update) {
  1805. lcd_set_cursor(2, menu_row);
  1806. ip4_to_str(_md->ip_str, (uint8_t*)(&_md->ip));
  1807. lcd_printf_P(PSTR("%s"), _md->ip_str);
  1808. }
  1809. }
  1810. // Show the printer IP address, if it is available.
  1811. if (IP_address) {
  1812. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1813. MENU_ITEM_BACK_P(PSTR("Printer IP Addr:")); ////MSG_PRINTER_IP c=18
  1814. MENU_ITEM_BACK_P(PSTR(" "));
  1815. if (((menu_item - 1) == menu_line) && lcd_draw_update) {
  1816. lcd_set_cursor(2, menu_row);
  1817. ip4_to_str(_md->ip_str, (uint8_t*)(&IP_address));
  1818. lcd_printf_P(PSTR("%s"), _md->ip_str);
  1819. }
  1820. }
  1821. #ifndef MK1BP
  1822. MENU_ITEM_BACK_P(STR_SEPARATOR);
  1823. MENU_ITEM_SUBMENU_P(_i("XYZ cal. details"), lcd_menu_xyz_y_min);////MSG_XYZ_DETAILS c=18
  1824. MENU_ITEM_SUBMENU_P(_i("Extruder info"), lcd_menu_extruder_info);////MSG_INFO_EXTRUDER c=18
  1825. MENU_ITEM_SUBMENU_P(_i("Sensor info"), lcd_menu_show_sensors_state);////MSG_INFO_SENSORS c=18
  1826. #ifdef TMC2130
  1827. MENU_ITEM_SUBMENU_P(_T(MSG_BELT_STATUS), lcd_menu_belt_status);////MSG_BELT_STATUS c=18
  1828. #endif //TMC2130
  1829. MENU_ITEM_SUBMENU_P(_i("Temperatures"), lcd_menu_temperatures);////MSG_MENU_TEMPERATURES c=18
  1830. #if defined (VOLT_BED_PIN) || defined (VOLT_PWR_PIN)
  1831. MENU_ITEM_SUBMENU_P(_i("Voltages"), lcd_menu_voltages);////MSG_MENU_VOLTAGES c=18
  1832. #endif //defined VOLT_BED_PIN || defined VOLT_PWR_PIN
  1833. #ifdef MENU_DUMP
  1834. MENU_ITEM_FUNCTION_P(_i("Dump memory"), lcd_dump_memory);
  1835. #endif //MENU_DUMP
  1836. #ifdef MENU_SERIAL_DUMP
  1837. if (emergency_serial_dump)
  1838. MENU_ITEM_FUNCTION_P(_i("Dump to serial"), lcd_serial_dump);
  1839. #endif
  1840. #ifdef DEBUG_BUILD
  1841. #ifdef EMERGENCY_HANDLERS
  1842. #ifdef WATCHDOG
  1843. MENU_ITEM_FUNCTION_P(PSTR("WDR crash"), lcd_wdr_crash);
  1844. #endif //WATCHDOG
  1845. MENU_ITEM_FUNCTION_P(PSTR("Stack crash"), lcd_stack_crash);
  1846. #endif //EMERGENCY_HANDLERS
  1847. MENU_ITEM_SUBMENU_P(PSTR("Debug"), lcd_menu_debug);////MSG_DEBUG c=18
  1848. #endif /* DEBUG_BUILD */
  1849. #endif //MK1BP
  1850. MENU_END();
  1851. }
  1852. void lcd_set_fan_check() {
  1853. fans_check_enabled = !fans_check_enabled;
  1854. eeprom_update_byte((unsigned char *)EEPROM_FAN_CHECK_ENABLED, fans_check_enabled);
  1855. #ifdef FANCHECK
  1856. if (fans_check_enabled == false) fan_check_error = EFCE_OK; //reset error if fanCheck is disabled during error. Allows resuming print.
  1857. #endif //FANCHECK
  1858. }
  1859. #ifdef MMU_HAS_CUTTER
  1860. void lcd_cutter_enabled()
  1861. {
  1862. if (EEPROM_MMU_CUTTER_ENABLED_enabled == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
  1863. {
  1864. #ifndef MMU_ALWAYS_CUT
  1865. eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, 0);
  1866. }
  1867. #else //MMU_ALWAYS_CUT
  1868. eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, EEPROM_MMU_CUTTER_ENABLED_always);
  1869. }
  1870. else if (EEPROM_MMU_CUTTER_ENABLED_always == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
  1871. {
  1872. eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, 0);
  1873. }
  1874. #endif //MMU_ALWAYS_CUT
  1875. else
  1876. {
  1877. eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, EEPROM_MMU_CUTTER_ENABLED_enabled);
  1878. }
  1879. }
  1880. #endif //MMU_HAS_CUTTER
  1881. void lcd_set_filament_autoload() {
  1882. fsensor_autoload_set(!fsensor_autoload_enabled);
  1883. }
  1884. #if defined(FILAMENT_SENSOR) && defined(PAT9125)
  1885. void lcd_set_filament_oq_meass()
  1886. {
  1887. fsensor_oq_meassure_set(!fsensor_oq_meassure_enabled);
  1888. }
  1889. #endif
  1890. FilamentAction eFilamentAction=FilamentAction::None; // must be initialized as 'non-autoLoad'
  1891. bool bFilamentFirstRun;
  1892. bool bFilamentPreheatState;
  1893. bool bFilamentAction=false;
  1894. static bool bFilamentWaitingFlag=false;
  1895. static void mFilamentPrompt()
  1896. {
  1897. uint8_t nLevel;
  1898. lcd_set_cursor(0,0);
  1899. lcdui_print_temp(LCD_STR_THERMOMETER[0],(int)degHotend(0),(int)degTargetHotend(0));
  1900. lcd_puts_at_P(0,1, _i("Press the knob")); ////MSG_PRESS_KNOB c=20
  1901. lcd_set_cursor(0,2);
  1902. switch(eFilamentAction)
  1903. {
  1904. case FilamentAction::Load:
  1905. case FilamentAction::AutoLoad:
  1906. case FilamentAction::MmuLoad:
  1907. lcd_puts_P(_i("to load filament")); ////MSG_TO_LOAD_FIL c=20
  1908. break;
  1909. case FilamentAction::UnLoad:
  1910. case FilamentAction::MmuUnLoad:
  1911. lcd_puts_P(_i("to unload filament")); ////MSG_TO_UNLOAD_FIL c=20
  1912. break;
  1913. case FilamentAction::MmuEject:
  1914. case FilamentAction::MmuCut:
  1915. case FilamentAction::None:
  1916. case FilamentAction::Preheat:
  1917. case FilamentAction::Lay1Cal:
  1918. break;
  1919. }
  1920. if(lcd_clicked())
  1921. {
  1922. nLevel=2;
  1923. if(!bFilamentPreheatState)
  1924. {
  1925. nLevel++;
  1926. // setTargetHotend0(0.0); // uncoment if return to base-state is required
  1927. }
  1928. menu_back(nLevel);
  1929. switch(eFilamentAction)
  1930. {
  1931. case FilamentAction::AutoLoad:
  1932. eFilamentAction=FilamentAction::None; // i.e. non-autoLoad
  1933. // FALLTHRU
  1934. case FilamentAction::Load:
  1935. loading_flag=true;
  1936. enquecommand_P(PSTR("M701")); // load filament
  1937. break;
  1938. case FilamentAction::UnLoad:
  1939. enquecommand_P(PSTR("M702")); // unload filament
  1940. break;
  1941. case FilamentAction::MmuLoad:
  1942. case FilamentAction::MmuUnLoad:
  1943. case FilamentAction::MmuEject:
  1944. case FilamentAction::MmuCut:
  1945. case FilamentAction::None:
  1946. case FilamentAction::Preheat:
  1947. case FilamentAction::Lay1Cal:
  1948. break;
  1949. }
  1950. }
  1951. }
  1952. void mFilamentItem(uint16_t nTemp, uint16_t nTempBed)
  1953. {
  1954. static int nTargetOld;
  1955. static int nTargetBedOld;
  1956. uint8_t nLevel;
  1957. nTargetOld = target_temperature[0];
  1958. nTargetBedOld = target_temperature_bed;
  1959. setTargetHotend0((float )nTemp);
  1960. setTargetBed((float) nTempBed);
  1961. {
  1962. const FilamentAction action = eFilamentAction;
  1963. if (action == FilamentAction::Preheat || action == FilamentAction::Lay1Cal)
  1964. {
  1965. lcd_return_to_status();
  1966. if (action == FilamentAction::Lay1Cal)
  1967. {
  1968. lcd_commands_type = LcdCommands::Layer1Cal;
  1969. }
  1970. else
  1971. {
  1972. raise_z_above(MIN_Z_FOR_PREHEAT);
  1973. if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE))
  1974. lcd_wizard(WizState::LoadFilHot);
  1975. }
  1976. return;
  1977. }
  1978. }
  1979. lcd_timeoutToStatus.stop();
  1980. if (current_temperature[0] > (target_temperature[0] * 0.95))
  1981. {
  1982. switch (eFilamentAction)
  1983. {
  1984. case FilamentAction::Load:
  1985. case FilamentAction::AutoLoad:
  1986. case FilamentAction::UnLoad:
  1987. if (bFilamentWaitingFlag) menu_submenu(mFilamentPrompt);
  1988. else
  1989. {
  1990. nLevel = bFilamentPreheatState ? 1 : 2;
  1991. menu_back(nLevel);
  1992. if ((eFilamentAction == FilamentAction::Load) || (eFilamentAction == FilamentAction::AutoLoad))
  1993. {
  1994. loading_flag = true;
  1995. enquecommand_P(PSTR("M701")); // load filament
  1996. if (eFilamentAction == FilamentAction::AutoLoad) eFilamentAction = FilamentAction::None; // i.e. non-autoLoad
  1997. }
  1998. if (eFilamentAction == FilamentAction::UnLoad)
  1999. enquecommand_P(PSTR("M702")); // unload filament
  2000. }
  2001. break;
  2002. case FilamentAction::MmuLoad:
  2003. nLevel = bFilamentPreheatState ? 1 : 2;
  2004. bFilamentAction = true;
  2005. menu_back(nLevel);
  2006. menu_submenu(mmu_load_to_nozzle_menu);
  2007. break;
  2008. case FilamentAction::MmuUnLoad:
  2009. nLevel = bFilamentPreheatState ? 1 : 2;
  2010. bFilamentAction = true;
  2011. menu_back(nLevel);
  2012. extr_unload();
  2013. break;
  2014. case FilamentAction::MmuEject:
  2015. nLevel = bFilamentPreheatState ? 1 : 2;
  2016. bFilamentAction = true;
  2017. menu_back(nLevel);
  2018. menu_submenu(mmu_fil_eject_menu);
  2019. break;
  2020. case FilamentAction::MmuCut:
  2021. #ifdef MMU_HAS_CUTTER
  2022. nLevel=bFilamentPreheatState?1:2;
  2023. bFilamentAction=true;
  2024. menu_back(nLevel);
  2025. menu_submenu(mmu_cut_filament_menu);
  2026. #endif //MMU_HAS_CUTTER
  2027. break;
  2028. case FilamentAction::None:
  2029. case FilamentAction::Preheat:
  2030. case FilamentAction::Lay1Cal:
  2031. // handled earlier
  2032. break;
  2033. }
  2034. if (bFilamentWaitingFlag) Sound_MakeSound(e_SOUND_TYPE_StandardPrompt);
  2035. bFilamentWaitingFlag = false;
  2036. }
  2037. else
  2038. {
  2039. if (!bFilamentWaitingFlag || lcd_draw_update)
  2040. {
  2041. // First entry from another menu OR first run after the filament preheat selection. Use
  2042. // bFilamentWaitingFlag to distinguish: this flag is reset exactly once when entering
  2043. // the menu and is used to raise the carriage *once*. In other cases, the LCD has been
  2044. // modified elsewhere and needs to be redrawn in full.
  2045. // reset bFilamentWaitingFlag immediately to avoid re-entry from raise_z_above()!
  2046. bool once = !bFilamentWaitingFlag;
  2047. bFilamentWaitingFlag = true;
  2048. // also force-enable lcd_draw_update (might be 0 when called from outside a menu)
  2049. lcd_draw_update = 1;
  2050. lcd_clear();
  2051. lcd_puts_at_P(0, 3, _T(MSG_CANCEL)); ////MSG_CANCEL
  2052. lcd_set_cursor(0, 1);
  2053. switch (eFilamentAction)
  2054. {
  2055. case FilamentAction::Load:
  2056. case FilamentAction::AutoLoad:
  2057. case FilamentAction::MmuLoad:
  2058. lcd_puts_P(_i("Preheating to load")); ////MSG_PREHEATING_TO_LOAD c=20
  2059. if (once) raise_z_above(MIN_Z_FOR_LOAD);
  2060. break;
  2061. case FilamentAction::UnLoad:
  2062. case FilamentAction::MmuUnLoad:
  2063. lcd_puts_P(_i("Preheating to unload")); ////MSG_PREHEATING_TO_UNLOAD c=20
  2064. if (once) raise_z_above(MIN_Z_FOR_UNLOAD);
  2065. break;
  2066. case FilamentAction::MmuEject:
  2067. lcd_puts_P(_i("Preheating to eject")); ////MSG_PREHEATING_TO_EJECT c=20
  2068. break;
  2069. case FilamentAction::MmuCut:
  2070. lcd_puts_P(_i("Preheating to cut")); ////MSG_PREHEATING_TO_CUT c=20
  2071. break;
  2072. case FilamentAction::None:
  2073. case FilamentAction::Preheat:
  2074. case FilamentAction::Lay1Cal:
  2075. // handled earlier
  2076. break;
  2077. }
  2078. }
  2079. if (bFilamentWaitingFlag) {
  2080. lcd_set_cursor(0, 0);
  2081. lcdui_print_temp(LCD_STR_THERMOMETER[0], (int) degHotend(0), (int) degTargetHotend(0));
  2082. }
  2083. if (lcd_clicked())
  2084. {
  2085. bFilamentWaitingFlag = false;
  2086. if (!bFilamentPreheatState)
  2087. {
  2088. setTargetHotend0(0.0);
  2089. setTargetBed(0.0);
  2090. menu_back();
  2091. }
  2092. else
  2093. {
  2094. setTargetHotend0((float )nTargetOld);
  2095. setTargetBed((float) nTargetBedOld);
  2096. }
  2097. menu_back();
  2098. if (eFilamentAction == FilamentAction::AutoLoad) eFilamentAction = FilamentAction::None; // i.e. non-autoLoad
  2099. }
  2100. }
  2101. }
  2102. static void mFilamentItem_farm()
  2103. {
  2104. bFilamentPreheatState = false;
  2105. mFilamentItem(FARM_PREHEAT_HOTEND_TEMP, FARM_PREHEAT_HPB_TEMP);
  2106. }
  2107. static void mFilamentItem_farm_nozzle()
  2108. {
  2109. bFilamentPreheatState = false;
  2110. mFilamentItem(FARM_PREHEAT_HOTEND_TEMP, 0);
  2111. }
  2112. static void mFilamentItem_PLA()
  2113. {
  2114. bFilamentPreheatState = false;
  2115. mFilamentItem(PLA_PREHEAT_HOTEND_TEMP, PLA_PREHEAT_HPB_TEMP);
  2116. }
  2117. static void mFilamentItem_PET()
  2118. {
  2119. bFilamentPreheatState = false;
  2120. mFilamentItem(PET_PREHEAT_HOTEND_TEMP, PET_PREHEAT_HPB_TEMP);
  2121. }
  2122. static void mFilamentItem_ASA()
  2123. {
  2124. bFilamentPreheatState = false;
  2125. mFilamentItem(ASA_PREHEAT_HOTEND_TEMP, ASA_PREHEAT_HPB_TEMP);
  2126. }
  2127. static void mFilamentItem_PC()
  2128. {
  2129. bFilamentPreheatState = false;
  2130. mFilamentItem(PC_PREHEAT_HOTEND_TEMP, PC_PREHEAT_HPB_TEMP);
  2131. }
  2132. static void mFilamentItem_ABS()
  2133. {
  2134. bFilamentPreheatState = false;
  2135. mFilamentItem(ABS_PREHEAT_HOTEND_TEMP, ABS_PREHEAT_HPB_TEMP);
  2136. }
  2137. static void mFilamentItem_HIPS()
  2138. {
  2139. bFilamentPreheatState = false;
  2140. mFilamentItem(HIPS_PREHEAT_HOTEND_TEMP, HIPS_PREHEAT_HPB_TEMP);
  2141. }
  2142. static void mFilamentItem_PP()
  2143. {
  2144. bFilamentPreheatState = false;
  2145. mFilamentItem(PP_PREHEAT_HOTEND_TEMP, PP_PREHEAT_HPB_TEMP);
  2146. }
  2147. static void mFilamentItem_FLEX()
  2148. {
  2149. bFilamentPreheatState = false;
  2150. mFilamentItem(FLEX_PREHEAT_HOTEND_TEMP, FLEX_PREHEAT_HPB_TEMP);
  2151. }
  2152. static void mFilamentItem_PVB()
  2153. {
  2154. bFilamentPreheatState = false;
  2155. mFilamentItem(PVB_PREHEAT_HOTEND_TEMP, PVB_PREHEAT_HPB_TEMP);
  2156. }
  2157. void mFilamentBack()
  2158. {
  2159. menu_back();
  2160. if (eFilamentAction == FilamentAction::AutoLoad ||
  2161. eFilamentAction == FilamentAction::Preheat ||
  2162. eFilamentAction == FilamentAction::Lay1Cal)
  2163. {
  2164. eFilamentAction = FilamentAction::None; // i.e. non-autoLoad
  2165. }
  2166. }
  2167. void lcd_generic_preheat_menu()
  2168. {
  2169. MENU_BEGIN();
  2170. if (!eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE))
  2171. {
  2172. if (eFilamentAction == FilamentAction::Lay1Cal)
  2173. {
  2174. MENU_ITEM_FUNCTION_P(_T(MSG_BACK), mFilamentBack);
  2175. }
  2176. else
  2177. {
  2178. MENU_ITEM_FUNCTION_P(_T(MSG_MAIN), mFilamentBack);
  2179. }
  2180. }
  2181. if (farm_mode)
  2182. {
  2183. MENU_ITEM_FUNCTION_P(PSTR("farm - " STRINGIFY(FARM_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(FARM_PREHEAT_HPB_TEMP)), mFilamentItem_farm);
  2184. MENU_ITEM_FUNCTION_P(PSTR("nozzle - " STRINGIFY(FARM_PREHEAT_HOTEND_TEMP) "/0"), mFilamentItem_farm_nozzle);
  2185. }
  2186. else
  2187. {
  2188. MENU_ITEM_SUBMENU_P(PSTR("PLA - " STRINGIFY(PLA_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PLA_PREHEAT_HPB_TEMP)),mFilamentItem_PLA);
  2189. MENU_ITEM_SUBMENU_P(PSTR("PET - " STRINGIFY(PET_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PET_PREHEAT_HPB_TEMP)),mFilamentItem_PET);
  2190. MENU_ITEM_SUBMENU_P(PSTR("ASA - " STRINGIFY(ASA_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ASA_PREHEAT_HPB_TEMP)),mFilamentItem_ASA);
  2191. MENU_ITEM_SUBMENU_P(PSTR("PC - " STRINGIFY(PC_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PC_PREHEAT_HPB_TEMP)),mFilamentItem_PC);
  2192. MENU_ITEM_SUBMENU_P(PSTR("PVB - " STRINGIFY(PVB_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PVB_PREHEAT_HPB_TEMP)),mFilamentItem_PVB);
  2193. MENU_ITEM_SUBMENU_P(PSTR("ABS - " STRINGIFY(ABS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ABS_PREHEAT_HPB_TEMP)),mFilamentItem_ABS);
  2194. MENU_ITEM_SUBMENU_P(PSTR("HIPS - " STRINGIFY(HIPS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(HIPS_PREHEAT_HPB_TEMP)),mFilamentItem_HIPS);
  2195. MENU_ITEM_SUBMENU_P(PSTR("PP - " STRINGIFY(PP_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PP_PREHEAT_HPB_TEMP)),mFilamentItem_PP);
  2196. MENU_ITEM_SUBMENU_P(PSTR("FLEX - " STRINGIFY(FLEX_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(FLEX_PREHEAT_HPB_TEMP)),mFilamentItem_FLEX);
  2197. }
  2198. if (!eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) && eFilamentAction == FilamentAction::Preheat) MENU_ITEM_FUNCTION_P(_T(MSG_COOLDOWN), lcd_cooldown);
  2199. MENU_END();
  2200. }
  2201. void mFilamentItemForce()
  2202. {
  2203. mFilamentItem(target_temperature[0],target_temperature_bed);
  2204. }
  2205. void lcd_unLoadFilament()
  2206. {
  2207. eFilamentAction=FilamentAction::UnLoad;
  2208. preheat_or_continue();
  2209. }
  2210. static void mmu_unload_filament()
  2211. {
  2212. eFilamentAction = FilamentAction::MmuUnLoad;
  2213. preheat_or_continue();
  2214. }
  2215. void lcd_wait_interact() {
  2216. lcd_clear();
  2217. lcd_set_cursor(0, 1);
  2218. #ifdef SNMM
  2219. lcd_puts_P(_i("Prepare new filament"));////MSG_PREPARE_FILAMENT c=20
  2220. #else
  2221. lcd_puts_P(_i("Insert filament"));////MSG_INSERT_FILAMENT c=20
  2222. #endif
  2223. if (!fsensor_autoload_enabled) {
  2224. lcd_puts_at_P(0, 2, _i("and press the knob"));////MSG_PRESS c=20 r=2
  2225. }
  2226. }
  2227. void lcd_change_success() {
  2228. lcd_clear();
  2229. lcd_puts_at_P(0, 2, _i("Change success!"));////MSG_CHANGE_SUCCESS c=20
  2230. }
  2231. static void lcd_loading_progress_bar(uint16_t loading_time_ms) {
  2232. for (uint_least8_t i = 0; i < LCD_WIDTH; i++) {
  2233. lcd_putc_at(i, 3, '.');
  2234. //loading_time_ms/20 delay
  2235. for (uint_least8_t j = 0; j < 5; j++) {
  2236. delay_keep_alive(loading_time_ms / 100);
  2237. }
  2238. }
  2239. }
  2240. void lcd_loading_color() {
  2241. //we are extruding 25mm with feedrate 200mm/min -> 7.5 seconds for whole action, 0.375 s for one character
  2242. lcd_clear();
  2243. lcd_puts_at_P(0, 0, _i("Loading color"));////MSG_LOADING_COLOR c=20
  2244. lcd_puts_at_P(0, 2, _T(MSG_PLEASE_WAIT));
  2245. lcd_loading_progress_bar((FILAMENTCHANGE_FINALFEED * 1000ul) / FILAMENTCHANGE_EFEED_FINAL); //show progress bar during filament loading slow sequence
  2246. }
  2247. void lcd_loading_filament() {
  2248. lcd_clear();
  2249. lcd_puts_at_P(0, 0, _T(MSG_LOADING_FILAMENT));
  2250. lcd_puts_at_P(0, 2, _T(MSG_PLEASE_WAIT));
  2251. #ifdef SNMM
  2252. for (int i = 0; i < 20; i++) {
  2253. lcd_set_cursor(i, 3);
  2254. lcd_print('.');
  2255. for (int j = 0; j < 10 ; j++) {
  2256. manage_heater();
  2257. manage_inactivity(true);
  2258. _delay(153);
  2259. }
  2260. }
  2261. #else //SNMM
  2262. uint16_t slow_seq_time = (FILAMENTCHANGE_FINALFEED * 1000ul) / FILAMENTCHANGE_EFEED_FINAL;
  2263. uint16_t fast_seq_time = (FILAMENTCHANGE_FIRSTFEED * 1000ul) / FILAMENTCHANGE_EFEED_FIRST;
  2264. lcd_loading_progress_bar(slow_seq_time + fast_seq_time); //show progress bar for total time of filament loading fast + slow sequence
  2265. #endif //SNMM
  2266. }
  2267. void lcd_alright() {
  2268. int enc_dif = 0;
  2269. int cursor_pos = 1;
  2270. lcd_clear();
  2271. lcd_puts_at_P(0, 0, _i("Changed correctly?"));////MSG_CORRECTLY c=20
  2272. lcd_puts_at_P(1, 1, _T(MSG_YES));
  2273. lcd_puts_at_P(1, 2, _i("Filament not loaded"));////MSG_NOT_LOADED c=19
  2274. lcd_puts_at_P(1, 3, _i("Color not correct"));////MSG_NOT_COLOR c=19
  2275. lcd_putc_at(0, 1, '>');
  2276. enc_dif = lcd_encoder_diff;
  2277. lcd_consume_click();
  2278. while (lcd_change_fil_state == 0) {
  2279. manage_heater();
  2280. manage_inactivity(true);
  2281. if ( abs((enc_dif - lcd_encoder_diff)) > 4 ) {
  2282. if ( (abs(enc_dif - lcd_encoder_diff)) > 1 ) {
  2283. if (enc_dif > lcd_encoder_diff ) {
  2284. cursor_pos --;
  2285. }
  2286. if (enc_dif < lcd_encoder_diff ) {
  2287. cursor_pos ++;
  2288. }
  2289. if (cursor_pos > 3) {
  2290. cursor_pos = 3;
  2291. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  2292. }
  2293. if (cursor_pos < 1) {
  2294. cursor_pos = 1;
  2295. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  2296. }
  2297. lcd_puts_at_P(0, 1, PSTR(" \n \n "));
  2298. lcd_putc_at(0, cursor_pos, '>');
  2299. enc_dif = lcd_encoder_diff;
  2300. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  2301. _delay(100);
  2302. }
  2303. }
  2304. if (lcd_clicked()) {
  2305. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  2306. lcd_change_fil_state = cursor_pos;
  2307. _delay(500);
  2308. }
  2309. };
  2310. lcd_clear();
  2311. lcd_return_to_status();
  2312. }
  2313. void show_preheat_nozzle_warning()
  2314. {
  2315. lcd_clear();
  2316. lcd_puts_at_P(0, 0, _T(MSG_ERROR));
  2317. lcd_puts_at_P(0, 2, _T(MSG_PREHEAT_NOZZLE));
  2318. _delay(2000);
  2319. lcd_clear();
  2320. }
  2321. void lcd_load_filament_color_check()
  2322. {
  2323. bool clean = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_CLEAN), false, true);
  2324. while (!clean) {
  2325. lcd_update_enable(true);
  2326. lcd_update(2);
  2327. load_filament_final_feed();
  2328. st_synchronize();
  2329. clean = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_CLEAN), false, true);
  2330. }
  2331. }
  2332. #ifdef FILAMENT_SENSOR
  2333. static void lcd_menu_AutoLoadFilament()
  2334. {
  2335. uint8_t nlines;
  2336. lcd_display_message_fullscreen_nonBlocking_P(_i("Autoloading filament is active, just press the knob and insert filament..."),nlines);////MSG_AUTOLOADING_ENABLED c=20 r=4
  2337. menu_back_if_clicked();
  2338. }
  2339. #endif //FILAMENT_SENSOR
  2340. static void preheat_or_continue()
  2341. {
  2342. bFilamentFirstRun = false;
  2343. if (target_temperature[0] >= EXTRUDE_MINTEMP)
  2344. {
  2345. bFilamentPreheatState = true;
  2346. mFilamentItem(target_temperature[0], target_temperature_bed);
  2347. }
  2348. else lcd_generic_preheat_menu();
  2349. }
  2350. static void lcd_LoadFilament()
  2351. {
  2352. eFilamentAction = FilamentAction::Load;
  2353. preheat_or_continue();
  2354. }
  2355. //! @brief Show filament used a print time
  2356. //!
  2357. //! If printing current print statistics are shown
  2358. //!
  2359. //! @code{.unparsed}
  2360. //! |01234567890123456789|
  2361. //! |Filament used: | MSG_FILAMENT_USED c=19
  2362. //! | 0000.00m |
  2363. //! |Print time: | MSG_PRINT_TIME c=19
  2364. //! | 00h 00m 00s |
  2365. //! ----------------------
  2366. //! @endcode
  2367. //!
  2368. //! If not printing, total statistics are shown
  2369. //!
  2370. //! @code{.unparsed}
  2371. //! |01234567890123456789|
  2372. //! |Total filament: | MSG_TOTAL_FILAMENT c=19
  2373. //! | 0000.00m |
  2374. //! |Total print time: | MSG_TOTAL_PRINT_TIME c=19
  2375. //! | 00d 00h 00m |
  2376. //! ----------------------
  2377. //! @endcode
  2378. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. Translations missing for "d"days, "h"ours, "m"inutes", "s"seconds".
  2379. void lcd_menu_statistics()
  2380. {
  2381. lcd_timeoutToStatus.stop(); //infinite timeout
  2382. if (IS_SD_PRINTING)
  2383. {
  2384. const float _met = ((float)total_filament_used) / (100000.f);
  2385. const uint32_t _t = (_millis() - starttime) / 1000ul;
  2386. const uint32_t _h = _t / 3600;
  2387. const uint8_t _m = (_t - (_h * 3600ul)) / 60ul;
  2388. const uint8_t _s = _t - ((_h * 3600ul) + (_m * 60ul));
  2389. lcd_home();
  2390. lcd_printf_P(_N(
  2391. "%S:\n"
  2392. "%18.2fm \n"
  2393. "%S:\n"
  2394. "%10ldh %02hhdm %02hhds"
  2395. ),
  2396. _i("Filament used"), _met, ////MSG_FILAMENT_USED c=19
  2397. _i("Print time"), _h, _m, _s); ////MSG_PRINT_TIME c=19
  2398. menu_back_if_clicked_fb();
  2399. }
  2400. else
  2401. {
  2402. unsigned long _filament = eeprom_read_dword((uint32_t *)EEPROM_FILAMENTUSED);
  2403. unsigned long _time = eeprom_read_dword((uint32_t *)EEPROM_TOTALTIME); //in minutes
  2404. uint8_t _hours, _minutes;
  2405. uint32_t _days;
  2406. float _filament_m = (float)_filament/100;
  2407. _days = _time / 1440;
  2408. _hours = (_time - (_days * 1440)) / 60;
  2409. _minutes = _time - ((_days * 1440) + (_hours * 60));
  2410. lcd_home();
  2411. lcd_printf_P(_N(
  2412. "%S:\n"
  2413. "%18.2fm \n"
  2414. "%S:\n"
  2415. "%10ldd %02hhdh %02hhdm"
  2416. ),
  2417. _i("Total filament"), _filament_m, ////MSG_TOTAL_FILAMENT c=19
  2418. _i("Total print time"), _days, _hours, _minutes); ////MSG_TOTAL_PRINT_TIME c=19
  2419. menu_back_if_clicked_fb();
  2420. }
  2421. }
  2422. static void _lcd_move(const char *name, int axis, int min, int max)
  2423. {
  2424. if (homing_flag || mesh_bed_leveling_flag)
  2425. {
  2426. // printer entered a new state where axis move is forbidden
  2427. menu_back();
  2428. return;
  2429. }
  2430. typedef struct
  2431. { // 2bytes total
  2432. bool initialized; // 1byte
  2433. bool endstopsEnabledPrevious; // 1byte
  2434. } _menu_data_t;
  2435. static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
  2436. _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
  2437. if (!_md->initialized)
  2438. {
  2439. _md->endstopsEnabledPrevious = enable_endstops(false);
  2440. _md->initialized = true;
  2441. }
  2442. if (lcd_encoder != 0)
  2443. {
  2444. refresh_cmd_timeout();
  2445. if (! planner_queue_full())
  2446. {
  2447. current_position[axis] += float((int)lcd_encoder) * move_menu_scale;
  2448. if (min_software_endstops && current_position[axis] < min) current_position[axis] = min;
  2449. if (max_software_endstops && current_position[axis] > max) current_position[axis] = max;
  2450. lcd_encoder = 0;
  2451. world2machine_clamp(current_position[X_AXIS], current_position[Y_AXIS]);
  2452. plan_buffer_line_curposXYZE(manual_feedrate[axis] / 60);
  2453. lcd_draw_update = 1;
  2454. }
  2455. }
  2456. if (lcd_draw_update)
  2457. {
  2458. lcd_set_cursor(0, 1);
  2459. menu_draw_float31(name, current_position[axis]);
  2460. }
  2461. if (menu_leaving || LCD_CLICKED) (void)enable_endstops(_md->endstopsEnabledPrevious);
  2462. if (LCD_CLICKED) menu_back();
  2463. }
  2464. void lcd_move_e()
  2465. {
  2466. if (degHotend0() > EXTRUDE_MINTEMP)
  2467. {
  2468. if (lcd_encoder != 0)
  2469. {
  2470. refresh_cmd_timeout();
  2471. if (! planner_queue_full())
  2472. {
  2473. current_position[E_AXIS] += float((int)lcd_encoder) * move_menu_scale;
  2474. lcd_encoder = 0;
  2475. plan_buffer_line_curposXYZE(manual_feedrate[E_AXIS] / 60);
  2476. lcd_draw_update = 1;
  2477. }
  2478. }
  2479. if (lcd_draw_update)
  2480. {
  2481. lcd_set_cursor(0, 1);
  2482. // Note: the colon behind the text is necessary to greatly shorten
  2483. // the implementation of menu_draw_float31
  2484. menu_draw_float31(PSTR("Extruder:"), current_position[E_AXIS]);
  2485. }
  2486. if (LCD_CLICKED) menu_back();
  2487. }
  2488. else
  2489. {
  2490. show_preheat_nozzle_warning();
  2491. lcd_return_to_status();
  2492. }
  2493. }
  2494. //! @brief Show measured Y distance of front calibration points from Y_MIN_POS
  2495. //! If those points are detected too close to edge of reachable area, their confidence is lowered.
  2496. //! This functionality is applied more often for MK2 printers.
  2497. //! @code{.unparsed}
  2498. //! |01234567890123456789|
  2499. //! |Y distance from min | MSG_Y_DIST_FROM_MIN
  2500. //! | -------------- | STR_SEPARATOR
  2501. //! |Left: 00.00mm| MSG_LEFT c=10, c=8
  2502. //! |Right: 00.00mm| MSG_RIGHT c=10, c=8
  2503. //! ----------------------
  2504. //! @endcode
  2505. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  2506. static void lcd_menu_xyz_y_min()
  2507. {
  2508. float distanceMin[2];
  2509. count_xyz_details(distanceMin);
  2510. lcd_home();
  2511. lcd_printf_P(_N(
  2512. "%S\n"
  2513. "%S\n"
  2514. "%S:\n"
  2515. "%S:"
  2516. ),
  2517. _i("Y distance from min"), ////MSG_Y_DIST_FROM_MIN c=20
  2518. separator,
  2519. _i("Left"), ////MSG_LEFT c=10
  2520. _i("Right") ////MSG_RIGHT c=10
  2521. );
  2522. for (uint8_t i = 0; i < 2; i++)
  2523. {
  2524. lcd_set_cursor(11,2+i);
  2525. if (distanceMin[i] >= 200) lcd_puts_P(_T(MSG_NA));
  2526. else lcd_printf_P(_N("%6.2fmm"), distanceMin[i]);
  2527. }
  2528. if (lcd_clicked())
  2529. menu_goto(lcd_menu_xyz_skew, 0, true, true);
  2530. }
  2531. //@brief Show measured axis skewness
  2532. float _deg(float rad)
  2533. {
  2534. return rad * 180 / M_PI;
  2535. }
  2536. //! @brief Show Measured XYZ Skew
  2537. //!
  2538. //! @code{.unparsed}
  2539. //! |01234567890123456789|
  2540. //! |Measured skew :0.00D| MSG_MEASURED_SKEW c=14, c=4
  2541. //! | -------------- | STR_SEPARATOR
  2542. //! |Slight skew :0.12D| MSG_SLIGHT_SKEW c=14, c=4
  2543. //! |Severe skew :0.25D| MSG_SEVERE_SKEW c=14, c=4
  2544. //! ----------------------
  2545. //! D - Degree sysmbol LCD_STR_DEGREE
  2546. //! @endcode
  2547. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  2548. static void lcd_menu_xyz_skew()
  2549. {
  2550. float angleDiff = eeprom_read_float((float*)(EEPROM_XYZ_CAL_SKEW));
  2551. lcd_home();
  2552. lcd_printf_P(_N(
  2553. "%-14.14S:\n"
  2554. "%S\n"
  2555. "%-14.14S:%3.2f\x01\n"
  2556. "%-14.14S:%3.2f\x01"
  2557. ),
  2558. _i("Measured skew"), ////MSG_MEASURED_SKEW c=14
  2559. separator,
  2560. _i("Slight skew"), _deg(bed_skew_angle_mild), ////MSG_SLIGHT_SKEW c=14, c=4
  2561. _i("Severe skew"), _deg(bed_skew_angle_extreme) ////MSG_SEVERE_SKEW c=14, c=4
  2562. );
  2563. if (angleDiff < 100){
  2564. lcd_set_cursor(15,0);
  2565. lcd_printf_P(_N("%3.2f\x01"), _deg(angleDiff));
  2566. }
  2567. else{
  2568. lcd_puts_at_P(15,0, _T(MSG_NA));
  2569. }
  2570. if (lcd_clicked())
  2571. menu_goto(lcd_menu_xyz_offset, 0, true, true);
  2572. }
  2573. //! @brief Show measured bed offset from expected position
  2574. //!
  2575. //! @code{.unparsed}
  2576. //! |01234567890123456789|
  2577. //! |[0;0] point offset | MSG_MEASURED_OFFSET c=20
  2578. //! | -------------- | STR_SEPARATOR
  2579. //! |X 00.00mm| c=10
  2580. //! |Y 00.00mm| c=10
  2581. //! ----------------------
  2582. //! @endcode
  2583. //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations.
  2584. static void lcd_menu_xyz_offset()
  2585. {
  2586. lcd_puts_at_P(0, 0, _i("[0;0] point offset"));////MSG_MEASURED_OFFSET c=20
  2587. lcd_puts_at_P(0, 1, separator);
  2588. lcd_puts_at_P(0, 2, PSTR("X"));
  2589. lcd_puts_at_P(0, 3, PSTR("Y"));
  2590. float vec_x[2];
  2591. float vec_y[2];
  2592. float cntr[2];
  2593. world2machine_read_valid(vec_x, vec_y, cntr);
  2594. for (uint_least8_t i = 0; i < 2; i++)
  2595. {
  2596. lcd_set_cursor((cntr[i] < 0) ? 13 : 14, i+2);
  2597. lcd_print(cntr[i]);
  2598. lcd_puts_at_P(18, i + 2, PSTR("mm"));
  2599. }
  2600. menu_back_if_clicked();
  2601. }
  2602. // Save a single axis babystep value.
  2603. void EEPROM_save_B(int pos, int* value)
  2604. {
  2605. eeprom_update_byte((unsigned char*)pos, (unsigned char)((*value) & 0xff));
  2606. eeprom_update_byte((unsigned char*)pos + 1, (unsigned char)((*value) >> 8));
  2607. }
  2608. // Read a single axis babystep value.
  2609. void EEPROM_read_B(int pos, int* value)
  2610. {
  2611. *value = (int)eeprom_read_byte((unsigned char*)pos) | (int)(eeprom_read_byte((unsigned char*)pos + 1) << 8);
  2612. }
  2613. // Note: the colon behind the text (X, Y, Z) is necessary to greatly shorten
  2614. // the implementation of menu_draw_float31
  2615. static void lcd_move_x() {
  2616. _lcd_move(PSTR("X:"), X_AXIS, X_MIN_POS, X_MAX_POS);
  2617. }
  2618. static void lcd_move_y() {
  2619. _lcd_move(PSTR("Y:"), Y_AXIS, Y_MIN_POS, Y_MAX_POS);
  2620. }
  2621. static void lcd_move_z() {
  2622. _lcd_move(PSTR("Z:"), Z_AXIS, Z_MIN_POS, Z_MAX_POS);
  2623. }
  2624. /**
  2625. * @brief Adjust first layer offset from bed if axis is Z_AXIS
  2626. *
  2627. * If menu is left (button pushed or timed out), value is stored to EEPROM and
  2628. * if the axis is Z_AXIS, CALIBRATION_STATUS_CALIBRATED is also stored.
  2629. * Purpose of this function for other axis then Z is unknown.
  2630. *
  2631. * @param axis AxisEnum X_AXIS Y_AXIS Z_AXIS
  2632. * other value leads to storing Z_AXIS
  2633. * @param msg text to be displayed
  2634. */
  2635. static void lcd_babystep_z()
  2636. {
  2637. if (homing_flag || mesh_bed_leveling_flag)
  2638. {
  2639. // printer changed to a new state where live Z is forbidden
  2640. menu_back();
  2641. return;
  2642. }
  2643. typedef struct
  2644. {
  2645. int8_t status;
  2646. int16_t babystepMemZ;
  2647. float babystepMemMMZ;
  2648. } _menu_data_t;
  2649. static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
  2650. _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
  2651. if (_md->status == 0)
  2652. {
  2653. // Menu was entered.
  2654. // Initialize its status.
  2655. _md->status = 1;
  2656. check_babystep();
  2657. if(!eeprom_is_sheet_initialized(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))){
  2658. _md->babystepMemZ = 0;
  2659. }
  2660. else{
  2661. _md->babystepMemZ = eeprom_read_word(reinterpret_cast<uint16_t *>(&(EEPROM_Sheets_base->
  2662. s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset)));
  2663. }
  2664. // same logic as in babystep_load
  2665. if (calibration_status() >= CALIBRATION_STATUS_LIVE_ADJUST)
  2666. _md->babystepMemZ = 0;
  2667. _md->babystepMemMMZ = _md->babystepMemZ/cs.axis_steps_per_unit[Z_AXIS];
  2668. lcd_draw_update = 1;
  2669. //SERIAL_ECHO("Z baby step: ");
  2670. //SERIAL_ECHO(_md->babystepMem[2]);
  2671. // Wait 90 seconds before closing the live adjust dialog.
  2672. lcd_timeoutToStatus.start();
  2673. }
  2674. if (lcd_encoder != 0)
  2675. {
  2676. _md->babystepMemZ += (int)lcd_encoder;
  2677. if (_md->babystepMemZ < Z_BABYSTEP_MIN) _md->babystepMemZ = Z_BABYSTEP_MIN; //-3999 -> -9.99 mm
  2678. else if (_md->babystepMemZ > Z_BABYSTEP_MAX) _md->babystepMemZ = Z_BABYSTEP_MAX; //0
  2679. else babystepsTodoZadd(lcd_encoder);
  2680. _md->babystepMemMMZ = _md->babystepMemZ/cs.axis_steps_per_unit[Z_AXIS];
  2681. _delay(50);
  2682. lcd_encoder = 0;
  2683. lcd_draw_update = 1;
  2684. }
  2685. if (lcd_draw_update)
  2686. {
  2687. SheetFormatBuffer buffer;
  2688. menu_format_sheet_E(EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))], buffer);
  2689. lcd_set_cursor(0, 0);
  2690. lcd_print(buffer.c);
  2691. lcd_set_cursor(0, 1);
  2692. menu_draw_float13(_i("Adjusting Z:"), _md->babystepMemMMZ); ////MSG_BABYSTEPPING_Z c=15 Beware: must include the ':' as its last character
  2693. }
  2694. if (LCD_CLICKED || menu_leaving)
  2695. {
  2696. // Only update the EEPROM when leaving the menu.
  2697. uint8_t active_sheet=eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet));
  2698. eeprom_update_word(reinterpret_cast<uint16_t *>(&(EEPROM_Sheets_base->s[active_sheet].z_offset)),_md->babystepMemZ);
  2699. eeprom_update_byte(&(EEPROM_Sheets_base->s[active_sheet].bed_temp),target_temperature_bed);
  2700. #ifdef PINDA_THERMISTOR
  2701. eeprom_update_byte(&(EEPROM_Sheets_base->s[active_sheet].pinda_temp),current_temperature_pinda);
  2702. #endif //PINDA_THERMISTOR
  2703. calibration_status_store(CALIBRATION_STATUS_CALIBRATED);
  2704. }
  2705. if (LCD_CLICKED) menu_back();
  2706. }
  2707. typedef struct
  2708. { // 12bytes + 9bytes = 21bytes total
  2709. menu_data_edit_t reserved; //12 bytes reserved for number editing functions
  2710. int8_t status; // 1byte
  2711. int16_t left; // 2byte
  2712. int16_t right; // 2byte
  2713. int16_t front; // 2byte
  2714. int16_t rear; // 2byte
  2715. } _menu_data_adjust_bed_t;
  2716. static_assert(sizeof(menu_data)>= sizeof(_menu_data_adjust_bed_t),"_menu_data_adjust_bed_t doesn't fit into menu_data");
  2717. void lcd_adjust_bed_reset(void)
  2718. {
  2719. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID, 1);
  2720. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_LEFT , 0);
  2721. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_RIGHT, 0);
  2722. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_FRONT, 0);
  2723. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_REAR , 0);
  2724. _menu_data_adjust_bed_t* _md = (_menu_data_adjust_bed_t*)&(menu_data[0]);
  2725. _md->status = 0;
  2726. }
  2727. //! @brief Show Bed level correct
  2728. //!
  2729. //! @code{.unparsed}
  2730. //! |01234567890123456789|
  2731. //! |Settings: | MSG_SETTINGS
  2732. //! |Left side [um]: | MSG_BED_CORRECTION_LEFT
  2733. //! |Right side[um]: | MSG_BED_CORRECTION_RIGHT
  2734. //! |Front side[um]: | MSG_BED_CORRECTION_FRONT
  2735. //! |Rear side [um]: | MSG_BED_CORRECTION_REAR
  2736. //! |Reset | MSG_BED_CORRECTION_RESET
  2737. //! ----------------------
  2738. //! @endcode
  2739. void lcd_adjust_bed(void)
  2740. {
  2741. _menu_data_adjust_bed_t* _md = (_menu_data_adjust_bed_t*)&(menu_data[0]);
  2742. if (_md->status == 0)
  2743. {
  2744. // Menu was entered.
  2745. _md->left = 0;
  2746. _md->right = 0;
  2747. _md->front = 0;
  2748. _md->rear = 0;
  2749. if (eeprom_read_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID) == 1)
  2750. {
  2751. _md->left = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_LEFT);
  2752. _md->right = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_RIGHT);
  2753. _md->front = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_FRONT);
  2754. _md->rear = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_REAR);
  2755. }
  2756. _md->status = 1;
  2757. }
  2758. MENU_BEGIN();
  2759. // leaving menu - this condition must be immediately before MENU_ITEM_BACK_P
  2760. ON_MENU_LEAVE(
  2761. eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_LEFT, _md->left);
  2762. eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_RIGHT, _md->right);
  2763. eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_FRONT, _md->front);
  2764. eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_REAR, _md->rear);
  2765. eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID, 1);
  2766. );
  2767. MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
  2768. MENU_ITEM_EDIT_int3_P(_i("Left side [um]"), &_md->left, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_LEFT c=14
  2769. MENU_ITEM_EDIT_int3_P(_i("Right side[um]"), &_md->right, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_RIGHT c=14
  2770. MENU_ITEM_EDIT_int3_P(_i("Front side[um]"), &_md->front, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_FRONT c=14
  2771. MENU_ITEM_EDIT_int3_P(_i("Rear side [um]"), &_md->rear, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_REAR c=14
  2772. MENU_ITEM_FUNCTION_P(_T(MSG_RESET), lcd_adjust_bed_reset);////MSG_RESET c=14
  2773. MENU_END();
  2774. }
  2775. //! @brief Show PID Extruder
  2776. //!
  2777. //! @code{.unparsed}
  2778. //! |01234567890123456789|
  2779. //! |Set temperature: | MSG_SET_TEMPERATURE c=20
  2780. //! | |
  2781. //! | 210 |
  2782. //! | |
  2783. //! ----------------------
  2784. //! @endcode
  2785. void pid_extruder()
  2786. {
  2787. lcd_clear();
  2788. lcd_puts_at_P(0, 0, _i("Set temperature:"));////MSG_SET_TEMPERATURE
  2789. pid_temp += int(lcd_encoder);
  2790. if (pid_temp > HEATER_0_MAXTEMP) pid_temp = HEATER_0_MAXTEMP;
  2791. if (pid_temp < HEATER_0_MINTEMP) pid_temp = HEATER_0_MINTEMP;
  2792. lcd_encoder = 0;
  2793. lcd_set_cursor(1, 2);
  2794. lcd_print(ftostr3(pid_temp));
  2795. if (lcd_clicked()) {
  2796. lcd_commands_type = LcdCommands::PidExtruder;
  2797. lcd_return_to_status();
  2798. lcd_update(2);
  2799. }
  2800. }
  2801. /*
  2802. void lcd_adjust_z() {
  2803. int enc_dif = 0;
  2804. int cursor_pos = 1;
  2805. int fsm = 0;
  2806. lcd_clear();
  2807. lcd_set_cursor(0, 0);
  2808. lcd_puts_P(_i("Auto adjust Z?"));////MSG_ADJUSTZ
  2809. lcd_set_cursor(1, 1);
  2810. lcd_puts_P(_T(MSG_YES));
  2811. lcd_set_cursor(1, 2);
  2812. lcd_puts_P(_T(MSG_NO));
  2813. lcd_set_cursor(0, 1);
  2814. lcd_print('>');
  2815. enc_dif = lcd_encoder_diff;
  2816. while (fsm == 0) {
  2817. manage_heater();
  2818. manage_inactivity(true);
  2819. if ( abs((enc_dif - lcd_encoder_diff)) > 4 ) {
  2820. if ( (abs(enc_dif - lcd_encoder_diff)) > 1 ) {
  2821. if (enc_dif > lcd_encoder_diff ) {
  2822. cursor_pos --;
  2823. }
  2824. if (enc_dif < lcd_encoder_diff ) {
  2825. cursor_pos ++;
  2826. }
  2827. if (cursor_pos > 2) {
  2828. cursor_pos = 2;
  2829. }
  2830. if (cursor_pos < 1) {
  2831. cursor_pos = 1;
  2832. }
  2833. lcd_set_cursor(0, 1);
  2834. lcd_print(' ');
  2835. lcd_set_cursor(0, 2);
  2836. lcd_print(' ');
  2837. lcd_set_cursor(0, cursor_pos);
  2838. lcd_print('>');
  2839. enc_dif = lcd_encoder_diff;
  2840. _delay(100);
  2841. }
  2842. }
  2843. if (lcd_clicked()) {
  2844. fsm = cursor_pos;
  2845. if (fsm == 1) {
  2846. int babystepLoadZ = 0;
  2847. EEPROM_read_B(EEPROM_BABYSTEP_Z, &babystepLoadZ);
  2848. CRITICAL_SECTION_START
  2849. babystepsTodo[Z_AXIS] = babystepLoadZ;
  2850. CRITICAL_SECTION_END
  2851. } else {
  2852. int zero = 0;
  2853. EEPROM_save_B(EEPROM_BABYSTEP_X, &zero);
  2854. EEPROM_save_B(EEPROM_BABYSTEP_Y, &zero);
  2855. EEPROM_save_B(EEPROM_BABYSTEP_Z, &zero);
  2856. }
  2857. _delay(500);
  2858. }
  2859. };
  2860. lcd_clear();
  2861. lcd_return_to_status();
  2862. }*/
  2863. #ifdef PINDA_THERMISTOR
  2864. bool lcd_wait_for_pinda(float temp) {
  2865. lcd_set_custom_characters_degree();
  2866. setAllTargetHotends(0);
  2867. setTargetBed(0);
  2868. LongTimer pinda_timeout;
  2869. pinda_timeout.start();
  2870. bool target_temp_reached = true;
  2871. while (current_temperature_pinda > temp){
  2872. lcd_display_message_fullscreen_P(_i("Waiting for PINDA probe cooling"));////MSG_WAITING_TEMP_PINDA c=20 r=3
  2873. lcd_set_cursor(0, 4);
  2874. lcd_print(LCD_STR_THERMOMETER[0]);
  2875. lcd_print(ftostr3(current_temperature_pinda));
  2876. lcd_print('/');
  2877. lcd_print(ftostr3(temp));
  2878. lcd_print(LCD_STR_DEGREE);
  2879. delay_keep_alive(1000);
  2880. serialecho_temperatures();
  2881. if (pinda_timeout.expired(8 * 60 * 1000ul)) { //PINDA cooling from 60 C to 35 C takes about 7 minutes
  2882. target_temp_reached = false;
  2883. break;
  2884. }
  2885. }
  2886. lcd_set_custom_characters_arrows();
  2887. lcd_update_enable(true);
  2888. return target_temp_reached;
  2889. }
  2890. #endif //PINDA_THERMISTOR
  2891. void lcd_wait_for_heater() {
  2892. lcd_display_message_fullscreen_P(_T(MSG_WIZARD_HEATING));
  2893. lcd_set_degree();
  2894. lcd_set_cursor(0, 4);
  2895. lcd_print(LCD_STR_THERMOMETER[0]);
  2896. lcd_print(ftostr3(degHotend(active_extruder)));
  2897. lcd_print('/');
  2898. lcd_print(ftostr3(degTargetHotend(active_extruder)));
  2899. lcd_print(LCD_STR_DEGREE);
  2900. }
  2901. void lcd_wait_for_cool_down() {
  2902. lcd_set_custom_characters_degree();
  2903. setAllTargetHotends(0);
  2904. setTargetBed(0);
  2905. int fanSpeedBckp = fanSpeed;
  2906. fanSpeed = 255;
  2907. while ((degHotend(0)>MAX_HOTEND_TEMP_CALIBRATION) || (degBed() > MAX_BED_TEMP_CALIBRATION)) {
  2908. lcd_display_message_fullscreen_P(_i("Waiting for nozzle and bed cooling"));////MSG_WAITING_TEMP c=20 r=4
  2909. lcd_set_cursor(0, 4);
  2910. lcd_print(LCD_STR_THERMOMETER[0]);
  2911. lcd_print(ftostr3(degHotend(0)));
  2912. lcd_print("/0");
  2913. lcd_print(LCD_STR_DEGREE);
  2914. lcd_set_cursor(9, 4);
  2915. lcd_print(LCD_STR_BEDTEMP[0]);
  2916. lcd_print(ftostr3(degBed()));
  2917. lcd_print("/0");
  2918. lcd_print(LCD_STR_DEGREE);
  2919. lcd_set_custom_characters();
  2920. delay_keep_alive(1000);
  2921. serialecho_temperatures();
  2922. }
  2923. fanSpeed = fanSpeedBckp;
  2924. lcd_set_custom_characters_arrows();
  2925. lcd_update_enable(true);
  2926. }
  2927. // Lets the user move the Z carriage up to the end stoppers.
  2928. // When done, it sets the current Z to Z_MAX_POS and returns true.
  2929. // Otherwise the Z calibration is not changed and false is returned.
  2930. #ifndef TMC2130
  2931. bool lcd_calibrate_z_end_stop_manual(bool only_z)
  2932. {
  2933. // Don't know where we are. Let's claim we are Z=0, so the soft end stops will not be triggered when moving up.
  2934. current_position[Z_AXIS] = 0;
  2935. plan_set_position_curposXYZE();
  2936. // Until confirmed by the confirmation dialog.
  2937. for (;;) {
  2938. const char *msg = only_z ? _i("Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done.") : _i("Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done.");////MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8////MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
  2939. const char *msg_next = lcd_display_message_fullscreen_P(msg);
  2940. const bool multi_screen = msg_next != NULL;
  2941. unsigned long previous_millis_msg = _millis();
  2942. // Until the user finishes the z up movement.
  2943. lcd_encoder_diff = 0;
  2944. lcd_encoder = 0;
  2945. for (;;) {
  2946. manage_heater();
  2947. manage_inactivity(true);
  2948. if (abs(lcd_encoder_diff) >= ENCODER_PULSES_PER_STEP) {
  2949. _delay(50);
  2950. lcd_encoder += abs(lcd_encoder_diff / ENCODER_PULSES_PER_STEP);
  2951. lcd_encoder_diff = 0;
  2952. if (! planner_queue_full()) {
  2953. // Only move up, whatever direction the user rotates the encoder.
  2954. current_position[Z_AXIS] += fabs(lcd_encoder);
  2955. lcd_encoder = 0;
  2956. plan_buffer_line_curposXYZE(manual_feedrate[Z_AXIS] / 60);
  2957. }
  2958. }
  2959. if (lcd_clicked()) {
  2960. // Abort a move if in progress.
  2961. planner_abort_hard();
  2962. while (lcd_clicked()) ;
  2963. _delay(10);
  2964. while (lcd_clicked()) ;
  2965. break;
  2966. }
  2967. if (multi_screen && _millis() - previous_millis_msg > 5000) {
  2968. if (msg_next == NULL)
  2969. msg_next = msg;
  2970. msg_next = lcd_display_message_fullscreen_P(msg_next);
  2971. previous_millis_msg = _millis();
  2972. }
  2973. }
  2974. // Let the user confirm, that the Z carriage is at the top end stoppers.
  2975. int8_t result = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Are left and right Z~carriages all up?"), false);////MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
  2976. if (result == -1)
  2977. goto canceled;
  2978. else if (result == 1)
  2979. goto calibrated;
  2980. // otherwise perform another round of the Z up dialog.
  2981. }
  2982. calibrated:
  2983. // Let the machine think the Z axis is a bit higher than it is, so it will not home into the bed
  2984. // during the search for the induction points.
  2985. if ((PRINTER_TYPE == PRINTER_MK25) || (PRINTER_TYPE == PRINTER_MK2) || (PRINTER_TYPE == PRINTER_MK2_SNMM)) {
  2986. current_position[Z_AXIS] = Z_MAX_POS-3.f;
  2987. }
  2988. else {
  2989. current_position[Z_AXIS] = Z_MAX_POS+4.f;
  2990. }
  2991. plan_set_position_curposXYZE();
  2992. return true;
  2993. canceled:
  2994. return false;
  2995. }
  2996. #endif // TMC2130
  2997. static inline bool pgm_is_whitespace(const char *c_addr)
  2998. {
  2999. const char c = pgm_read_byte(c_addr);
  3000. return c == ' ' || c == '\t' || c == '\r' || c == '\n';
  3001. }
  3002. static inline bool pgm_is_interpunction(const char *c_addr)
  3003. {
  3004. const char c = pgm_read_byte(c_addr);
  3005. return c == '.' || c == ',' || c == ':'|| c == ';' || c == '?' || c == '!' || c == '/';
  3006. }
  3007. /**
  3008. * @brief show full screen message
  3009. *
  3010. * This function is non-blocking
  3011. * @param msg message to be displayed from PROGMEM
  3012. * @param nlines
  3013. * @return rest of the text (to be displayed on next page)
  3014. */
  3015. static const char* lcd_display_message_fullscreen_nonBlocking_P(const char *msg, uint8_t &nlines)
  3016. {
  3017. lcd_set_cursor(0, 0);
  3018. const char *msgend = msg;
  3019. uint8_t row = 0;
  3020. bool multi_screen = false;
  3021. for (; row < 4; ++ row) {
  3022. while (pgm_is_whitespace(msg))
  3023. ++ msg;
  3024. if (pgm_read_byte(msg) == 0)
  3025. // End of the message.
  3026. break;
  3027. lcd_set_cursor(0, row);
  3028. uint8_t linelen = min(strlen_P(msg), LCD_WIDTH);
  3029. const char *msgend2 = msg + linelen;
  3030. msgend = msgend2;
  3031. if (row == 3 && linelen == LCD_WIDTH) {
  3032. // Last line of the display, full line shall be displayed.
  3033. // Find out, whether this message will be split into multiple screens.
  3034. while (pgm_is_whitespace(msgend))
  3035. ++ msgend;
  3036. multi_screen = pgm_read_byte(msgend) != 0;
  3037. if (multi_screen)
  3038. msgend = (msgend2 -= 2);
  3039. }
  3040. if (pgm_read_byte(msgend) != 0 && ! pgm_is_whitespace(msgend) && ! pgm_is_interpunction(msgend)) {
  3041. // Splitting a word. Find the start of the current word.
  3042. while (msgend > msg && ! pgm_is_whitespace(msgend - 1))
  3043. -- msgend;
  3044. if (msgend == msg)
  3045. // Found a single long word, which cannot be split. Just cut it.
  3046. msgend = msgend2;
  3047. }
  3048. for (; msg < msgend; ++ msg) {
  3049. char c = char(pgm_read_byte(msg));
  3050. if (c == '~')
  3051. c = ' ';
  3052. lcd_print(c);
  3053. }
  3054. }
  3055. if (multi_screen) {
  3056. // Display the "next screen" indicator character.
  3057. // lcd_set_custom_characters_arrows();
  3058. lcd_set_custom_characters_nextpage();
  3059. lcd_set_cursor(19, 3);
  3060. // Display the down arrow.
  3061. lcd_print(char(1));
  3062. }
  3063. nlines = row;
  3064. return multi_screen ? msgend : NULL;
  3065. }
  3066. const char* lcd_display_message_fullscreen_P(const char *msg, uint8_t &nlines)
  3067. {
  3068. // Disable update of the screen by the usual lcd_update(0) routine.
  3069. lcd_update_enable(false);
  3070. lcd_clear();
  3071. // uint8_t nlines;
  3072. return lcd_display_message_fullscreen_nonBlocking_P(msg, nlines);
  3073. }
  3074. const char* lcd_display_message_fullscreen_P(const char *msg)
  3075. {
  3076. uint8_t nlines;
  3077. return lcd_display_message_fullscreen_P(msg, nlines);
  3078. }
  3079. /**
  3080. * @brief show full screen message and wait
  3081. *
  3082. * This function is blocking.
  3083. * @param msg message to be displayed from PROGMEM
  3084. */
  3085. void lcd_show_fullscreen_message_and_wait_P(const char *msg)
  3086. {
  3087. LcdUpdateDisabler lcdUpdateDisabler;
  3088. const char *msg_next = lcd_display_message_fullscreen_P(msg);
  3089. bool multi_screen = msg_next != NULL;
  3090. lcd_set_custom_characters_nextpage();
  3091. lcd_consume_click();
  3092. KEEPALIVE_STATE(PAUSED_FOR_USER);
  3093. // Until confirmed by a button click.
  3094. for (;;) {
  3095. if (!multi_screen) {
  3096. lcd_set_cursor(19, 3);
  3097. // Display the confirm char.
  3098. lcd_print(char(2));
  3099. }
  3100. // Wait for 5 seconds before displaying the next text.
  3101. for (uint8_t i = 0; i < 100; ++ i) {
  3102. delay_keep_alive(50);
  3103. if (lcd_clicked()) {
  3104. if (msg_next == NULL) {
  3105. KEEPALIVE_STATE(IN_HANDLER);
  3106. lcd_set_custom_characters();
  3107. lcd_update_enable(true);
  3108. lcd_update(2);
  3109. return;
  3110. }
  3111. else {
  3112. break;
  3113. }
  3114. }
  3115. }
  3116. if (multi_screen) {
  3117. if (msg_next == NULL)
  3118. msg_next = msg;
  3119. msg_next = lcd_display_message_fullscreen_P(msg_next);
  3120. if (msg_next == NULL) {
  3121. lcd_set_cursor(19, 3);
  3122. // Display the confirm char.
  3123. lcd_print(char(2));
  3124. }
  3125. }
  3126. }
  3127. }
  3128. bool lcd_wait_for_click_delay(uint16_t nDelay)
  3129. // nDelay :: timeout [s] (0 ~ no timeout)
  3130. // true ~ clicked, false ~ delayed
  3131. {
  3132. bool bDelayed;
  3133. long nTime0 = _millis()/1000;
  3134. lcd_consume_click();
  3135. KEEPALIVE_STATE(PAUSED_FOR_USER);
  3136. for (;;) {
  3137. manage_heater();
  3138. manage_inactivity(true);
  3139. bDelayed = ((_millis()/1000-nTime0) > nDelay);
  3140. bDelayed = (bDelayed && (nDelay != 0)); // 0 ~ no timeout, always waiting for click
  3141. if (lcd_clicked() || bDelayed) {
  3142. KEEPALIVE_STATE(IN_HANDLER);
  3143. return(!bDelayed);
  3144. }
  3145. }
  3146. }
  3147. void lcd_wait_for_click()
  3148. {
  3149. lcd_wait_for_click_delay(0);
  3150. }
  3151. //! @brief Show multiple screen message with yes and no possible choices and wait with possible timeout
  3152. //! @param msg Message to show
  3153. //! @param allow_timeouting if true, allows time outing of the screen
  3154. //! @param default_yes if true, yes choice is selected by default, otherwise no choice is preselected
  3155. //! @retval 1 yes choice selected by user
  3156. //! @retval 0 no choice selected by user
  3157. //! @retval -1 screen timed out
  3158. int8_t lcd_show_multiscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting, bool default_yes) //currently just max. n*4 + 3 lines supported (set in language header files)
  3159. {
  3160. return lcd_show_multiscreen_message_two_choices_and_wait_P(msg, allow_timeouting, default_yes, _T(MSG_YES), _T(MSG_NO));
  3161. }
  3162. //! @brief Show multiple screen message with two possible choices and wait with possible timeout
  3163. //! @param msg Message to show
  3164. //! @param allow_timeouting if true, allows time outing of the screen
  3165. //! @param default_first if true, fist choice is selected by default, otherwise second choice is preselected
  3166. //! @param first_choice text caption of first possible choice
  3167. //! @param second_choice text caption of second possible choice
  3168. //! @retval 1 first choice selected by user
  3169. //! @retval 0 second choice selected by user
  3170. //! @retval -1 screen timed out
  3171. int8_t lcd_show_multiscreen_message_two_choices_and_wait_P(const char *msg, bool allow_timeouting, bool default_first,
  3172. const char *first_choice, const char *second_choice)
  3173. {
  3174. const char *msg_next = lcd_display_message_fullscreen_P(msg);
  3175. bool multi_screen = msg_next != NULL;
  3176. bool yes = default_first ? true : false;
  3177. // Wait for user confirmation or a timeout.
  3178. unsigned long previous_millis_cmd = _millis();
  3179. int8_t enc_dif = lcd_encoder_diff;
  3180. lcd_consume_click();
  3181. //KEEPALIVE_STATE(PAUSED_FOR_USER);
  3182. for (;;) {
  3183. for (uint8_t i = 0; i < 100; ++i) {
  3184. delay_keep_alive(50);
  3185. if (allow_timeouting && _millis() - previous_millis_cmd > LCD_TIMEOUT_TO_STATUS)
  3186. return -1;
  3187. manage_heater();
  3188. manage_inactivity(true);
  3189. if (abs(enc_dif - lcd_encoder_diff) > 4) {
  3190. if (msg_next == NULL) {
  3191. lcd_set_cursor(0, 3);
  3192. if (enc_dif < lcd_encoder_diff && yes) {
  3193. lcd_print(' ');
  3194. lcd_putc_at(7, 3, '>');
  3195. yes = false;
  3196. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  3197. }
  3198. else if (enc_dif > lcd_encoder_diff && !yes) {
  3199. lcd_print('>');
  3200. lcd_putc_at(7, 3, ' ');
  3201. yes = true;
  3202. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  3203. }
  3204. enc_dif = lcd_encoder_diff;
  3205. }
  3206. else {
  3207. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  3208. break; //turning knob skips waiting loop
  3209. }
  3210. }
  3211. if (lcd_clicked()) {
  3212. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  3213. if (msg_next == NULL) {
  3214. //KEEPALIVE_STATE(IN_HANDLER);
  3215. lcd_set_custom_characters();
  3216. return yes;
  3217. }
  3218. else break;
  3219. }
  3220. }
  3221. if (multi_screen) {
  3222. if (msg_next == NULL) {
  3223. msg_next = msg;
  3224. }
  3225. msg_next = lcd_display_message_fullscreen_P(msg_next);
  3226. }
  3227. if (msg_next == NULL) {
  3228. lcd_set_cursor(0, 3);
  3229. if (yes) lcd_print('>');
  3230. lcd_puts_at_P(1, 3, first_choice);
  3231. lcd_set_cursor(7, 3);
  3232. if (!yes) lcd_print('>');
  3233. lcd_puts_at_P(8, 3, second_choice);
  3234. }
  3235. }
  3236. }
  3237. //! @brief Show single screen message with yes and no possible choices and wait with possible timeout
  3238. //! @param msg Message to show
  3239. //! @param allow_timeouting if true, allows time outing of the screen
  3240. //! @param default_yes if true, yes choice is selected by default, otherwise no choice is preselected
  3241. //! @retval 1 yes choice selected by user
  3242. //! @retval 0 no choice selected by user
  3243. //! @retval -1 screen timed out
  3244. int8_t lcd_show_fullscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting, bool default_yes)
  3245. {
  3246. lcd_display_message_fullscreen_P(msg);
  3247. if (default_yes) {
  3248. lcd_putc_at(0, 2, '>');
  3249. lcd_puts_P(_T(MSG_YES));
  3250. lcd_puts_at_P(1, 3, _T(MSG_NO));
  3251. }
  3252. else {
  3253. lcd_puts_at_P(1, 2, _T(MSG_YES));
  3254. lcd_putc_at(0, 3, '>');
  3255. lcd_puts_P(_T(MSG_NO));
  3256. }
  3257. int8_t retval = default_yes ? true : false;
  3258. // Wait for user confirmation or a timeout.
  3259. unsigned long previous_millis_cmd = _millis();
  3260. int8_t enc_dif = lcd_encoder_diff;
  3261. lcd_consume_click();
  3262. KEEPALIVE_STATE(PAUSED_FOR_USER);
  3263. for (;;) {
  3264. if (allow_timeouting && _millis() - previous_millis_cmd > LCD_TIMEOUT_TO_STATUS)
  3265. {
  3266. retval = -1;
  3267. break;
  3268. }
  3269. manage_heater();
  3270. manage_inactivity(true);
  3271. if (abs(enc_dif - lcd_encoder_diff) > 4) {
  3272. lcd_set_cursor(0, 2);
  3273. if (enc_dif < lcd_encoder_diff && retval) {
  3274. lcd_print(' ');
  3275. lcd_putc_at(0, 3, '>');
  3276. retval = 0;
  3277. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  3278. }
  3279. else if (enc_dif > lcd_encoder_diff && !retval) {
  3280. lcd_print('>');
  3281. lcd_putc_at(0, 3, ' ');
  3282. retval = 1;
  3283. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  3284. }
  3285. enc_dif = lcd_encoder_diff;
  3286. }
  3287. if (lcd_clicked()) {
  3288. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  3289. KEEPALIVE_STATE(IN_HANDLER);
  3290. break;
  3291. }
  3292. }
  3293. lcd_encoder_diff = 0;
  3294. return retval;
  3295. }
  3296. void lcd_bed_calibration_show_result(BedSkewOffsetDetectionResultType result, uint8_t point_too_far_mask)
  3297. {
  3298. const char *msg = NULL;
  3299. if (result == BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND) {
  3300. lcd_show_fullscreen_message_and_wait_P(_i("XYZ calibration failed. Bed calibration point was not found."));////MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
  3301. } else if (result == BED_SKEW_OFFSET_DETECTION_FITTING_FAILED) {
  3302. if (point_too_far_mask == 0)
  3303. msg = _T(MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED);
  3304. else if (point_too_far_mask == 2 || point_too_far_mask == 7)
  3305. // Only the center point or all the three front points.
  3306. msg = _i("XYZ calibration failed. Front calibration points not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
  3307. else if ((point_too_far_mask & 1) == 0)
  3308. // The right and maybe the center point out of reach.
  3309. msg = _i("XYZ calibration failed. Right front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
  3310. else
  3311. // The left and maybe the center point out of reach.
  3312. msg = _i("XYZ calibration failed. Left front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
  3313. lcd_show_fullscreen_message_and_wait_P(msg);
  3314. } else {
  3315. if (point_too_far_mask != 0) {
  3316. if (point_too_far_mask == 2 || point_too_far_mask == 7)
  3317. // Only the center point or all the three front points.
  3318. msg = _i("XYZ calibration compromised. Front calibration points not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
  3319. else if ((point_too_far_mask & 1) == 0)
  3320. // The right and maybe the center point out of reach.
  3321. msg = _i("XYZ calibration compromised. Right front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
  3322. else
  3323. // The left and maybe the center point out of reach.
  3324. msg = _i("XYZ calibration compromised. Left front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
  3325. lcd_show_fullscreen_message_and_wait_P(msg);
  3326. }
  3327. if (point_too_far_mask == 0 || result > 0) {
  3328. switch (result) {
  3329. default:
  3330. // should not happen
  3331. msg = _T(MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED);
  3332. break;
  3333. case BED_SKEW_OFFSET_DETECTION_PERFECT:
  3334. msg = _i("XYZ calibration ok. X/Y axes are perpendicular. Congratulations!");////MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
  3335. break;
  3336. case BED_SKEW_OFFSET_DETECTION_SKEW_MILD:
  3337. msg = _i("XYZ calibration all right. X/Y axes are slightly skewed. Good job!");////MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
  3338. break;
  3339. case BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME:
  3340. msg = _i("XYZ calibration all right. Skew will be corrected automatically.");////MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
  3341. break;
  3342. }
  3343. lcd_show_fullscreen_message_and_wait_P(msg);
  3344. }
  3345. }
  3346. }
  3347. void lcd_temp_cal_show_result(bool result) {
  3348. custom_message_type = CustomMsg::Status;
  3349. disable_x();
  3350. disable_y();
  3351. disable_z();
  3352. disable_e0();
  3353. disable_e1();
  3354. disable_e2();
  3355. setTargetBed(0); //set bed target temperature back to 0
  3356. if (result == true) {
  3357. eeprom_update_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 1);
  3358. SERIAL_ECHOLNPGM("Temperature calibration done. Continue with pressing the knob.");
  3359. lcd_show_fullscreen_message_and_wait_P(_T(MSG_TEMP_CALIBRATION_DONE));
  3360. eeprom_update_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE, 1);
  3361. }
  3362. else {
  3363. eeprom_update_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 0);
  3364. SERIAL_ECHOLNPGM("Temperature calibration failed. Continue with pressing the knob.");
  3365. lcd_show_fullscreen_message_and_wait_P(_i("Temperature calibration failed"));////MSG_TEMP_CAL_FAILED c=20 r=8
  3366. eeprom_update_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE, 0);
  3367. }
  3368. lcd_update_enable(true);
  3369. lcd_update(2);
  3370. }
  3371. static void lcd_show_end_stops() {
  3372. lcd_puts_at_P(0, 0, (PSTR("End stops diag")));
  3373. lcd_puts_at_P(0, 1, (READ(X_MIN_PIN) ^ (bool)X_MIN_ENDSTOP_INVERTING) ? (PSTR("X1")) : (PSTR("X0")));
  3374. lcd_puts_at_P(0, 2, (READ(Y_MIN_PIN) ^ (bool)Y_MIN_ENDSTOP_INVERTING) ? (PSTR("Y1")) : (PSTR("Y0")));
  3375. lcd_puts_at_P(0, 3, (READ(Z_MIN_PIN) ^ (bool)Z_MIN_ENDSTOP_INVERTING) ? (PSTR("Z1")) : (PSTR("Z0")));
  3376. }
  3377. #ifndef TMC2130
  3378. static void menu_show_end_stops() {
  3379. lcd_show_end_stops();
  3380. if (LCD_CLICKED) menu_back();
  3381. }
  3382. #endif // not defined TMC2130
  3383. // Lets the user move the Z carriage up to the end stoppers.
  3384. // When done, it sets the current Z to Z_MAX_POS and returns true.
  3385. // Otherwise the Z calibration is not changed and false is returned.
  3386. void lcd_diag_show_end_stops()
  3387. {
  3388. lcd_clear();
  3389. lcd_consume_click();
  3390. for (;;) {
  3391. manage_heater();
  3392. manage_inactivity(true);
  3393. lcd_show_end_stops();
  3394. if (lcd_clicked()) {
  3395. break;
  3396. }
  3397. }
  3398. lcd_clear();
  3399. lcd_return_to_status();
  3400. }
  3401. static void lcd_print_state(uint8_t state)
  3402. {
  3403. switch (state) {
  3404. case STATE_ON:
  3405. lcd_puts_P(_N(" 1"));
  3406. break;
  3407. case STATE_OFF:
  3408. lcd_puts_P(_N(" 0"));
  3409. break;
  3410. default:
  3411. lcd_puts_P(_T(MSG_NA));
  3412. break;
  3413. }
  3414. }
  3415. //! @brief Show sensor state
  3416. //!
  3417. //! @code{.unparsed}
  3418. //! |01234567890123456789|
  3419. //! |PINDA N/A FINDA N/A| MSG_PINDA c=5 MSG_FINDA c=5
  3420. //! |Fil. sensor N/A| MSG_FSENSOR
  3421. //! |Xd 000 Yd 000| MSG_XD
  3422. //! |Int 000 Shut 000|
  3423. //! ----------------------
  3424. //! @endcode
  3425. static void lcd_show_sensors_state()
  3426. {
  3427. //0: N/A; 1: OFF; 2: ON
  3428. uint8_t pinda_state = STATE_NA;
  3429. uint8_t finda_state = STATE_NA;
  3430. uint8_t idler_state = STATE_NA;
  3431. pinda_state = READ(Z_MIN_PIN);
  3432. if (mmu_enabled && ((_millis() - mmu_last_finda_response) < 1000ul) )
  3433. {
  3434. finda_state = mmu_finda;
  3435. }
  3436. //lcd_puts_at_P(0, 0, _i("Sensor state"));
  3437. lcd_puts_at_P(0, 0, _T(MSG_PINDA));
  3438. lcd_set_cursor(LCD_WIDTH - 14, 0);
  3439. lcd_print_state(pinda_state);
  3440. if (mmu_enabled == true)
  3441. {
  3442. lcd_puts_at_P(10, 0, _n("FINDA"));////MSG_FINDA c=5
  3443. lcd_set_cursor(LCD_WIDTH - 3, 0);
  3444. lcd_print_state(finda_state);
  3445. }
  3446. if (ir_sensor_detected) {
  3447. idler_state = !READ(IR_SENSOR_PIN);
  3448. lcd_puts_at_P(0, 1, _i("Fil. sensor"));
  3449. lcd_set_cursor(LCD_WIDTH - 3, 1);
  3450. lcd_print_state(idler_state);
  3451. }
  3452. #ifdef PAT9125
  3453. // Display X and Y difference from Filament sensor
  3454. // Display Light intensity from Filament sensor
  3455. // Frame_Avg register represents the average brightness of all pixels within a frame (324 pixels). This
  3456. // value ranges from 0(darkest) to 255(brightest).
  3457. // Display LASER shutter time from Filament sensor
  3458. // Shutter register is an index of LASER shutter time. It is automatically controlled by the chip's internal
  3459. // auto-exposure algorithm. When the chip is tracking on a good reflection surface, the Shutter is small.
  3460. // When the chip is tracking on a poor reflection surface, the Shutter is large. Value ranges from 0 to 46.
  3461. if (mmu_enabled == false)
  3462. {
  3463. //if (!fsensor_enabled)
  3464. // lcd_puts_P(_N("Filament sensor\n" "is disabled."));
  3465. //else
  3466. //{
  3467. if (!moves_planned() && !IS_SD_PRINTING && !is_usb_printing && (lcd_commands_type != LcdCommands::Layer1Cal))
  3468. pat9125_update();
  3469. lcd_set_cursor(0, 2);
  3470. lcd_printf_P(_N(
  3471. "Xd: %3d "
  3472. "Yd: %3d\n" ////c=4
  3473. "Int: %3d " ////c=4
  3474. "Shut: %3d" ////c=4
  3475. ),
  3476. pat9125_x, pat9125_y,
  3477. pat9125_b, pat9125_s
  3478. );
  3479. //}
  3480. }
  3481. #endif //PAT9125
  3482. }
  3483. void lcd_menu_show_sensors_state() // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
  3484. {
  3485. lcd_timeoutToStatus.stop();
  3486. lcd_show_sensors_state();
  3487. if(LCD_CLICKED)
  3488. {
  3489. lcd_timeoutToStatus.start();
  3490. menu_back();
  3491. }
  3492. }
  3493. void prusa_statistics_err(char c){
  3494. SERIAL_ECHOPGM("{[ERR:");
  3495. SERIAL_ECHO(c);
  3496. SERIAL_ECHO(']');
  3497. prusa_stat_farm_number();
  3498. }
  3499. static void prusa_statistics_case0(uint8_t statnr){
  3500. SERIAL_ECHO('{');
  3501. prusa_stat_printerstatus(statnr);
  3502. prusa_stat_farm_number();
  3503. prusa_stat_printinfo();
  3504. }
  3505. void prusa_statistics(int _message, uint8_t _fil_nr) {
  3506. #ifdef DEBUG_DISABLE_PRUSA_STATISTICS
  3507. return;
  3508. #endif //DEBUG_DISABLE_PRUSA_STATISTICS
  3509. switch (_message)
  3510. {
  3511. case 0: // default message
  3512. if (busy_state == PAUSED_FOR_USER)
  3513. {
  3514. prusa_statistics_case0(15);
  3515. }
  3516. else if (isPrintPaused)
  3517. {
  3518. prusa_statistics_case0(14);
  3519. }
  3520. else if (IS_SD_PRINTING || loading_flag)
  3521. {
  3522. prusa_statistics_case0(4);
  3523. }
  3524. else
  3525. {
  3526. SERIAL_ECHO('{');
  3527. prusa_stat_printerstatus(1);
  3528. prusa_stat_farm_number();
  3529. prusa_stat_diameter();
  3530. status_number = 1;
  3531. }
  3532. break;
  3533. case 1: // 1 heating
  3534. farm_status = 2;
  3535. SERIAL_ECHO('{');
  3536. prusa_stat_printerstatus(2);
  3537. prusa_stat_farm_number();
  3538. status_number = 2;
  3539. farm_timer = 1;
  3540. break;
  3541. case 2: // heating done
  3542. farm_status = 3;
  3543. SERIAL_ECHO('{');
  3544. prusa_stat_printerstatus(3);
  3545. prusa_stat_farm_number();
  3546. SERIAL_ECHOLN('}');
  3547. status_number = 3;
  3548. farm_timer = 1;
  3549. if (IS_SD_PRINTING || loading_flag)
  3550. {
  3551. farm_status = 4;
  3552. SERIAL_ECHO('{');
  3553. prusa_stat_printerstatus(4);
  3554. prusa_stat_farm_number();
  3555. status_number = 4;
  3556. }
  3557. else
  3558. {
  3559. SERIAL_ECHO('{');
  3560. prusa_stat_printerstatus(3);
  3561. prusa_stat_farm_number();
  3562. status_number = 3;
  3563. }
  3564. farm_timer = 1;
  3565. break;
  3566. case 3: // filament change
  3567. // must do a return here to prevent doing SERIAL_ECHOLN("}") at the very end of this function
  3568. // saved a considerable amount of FLASH
  3569. return;
  3570. break;
  3571. case 4: // print succesfull
  3572. SERIAL_ECHOPGM("{[RES:1][FIL:");
  3573. MYSERIAL.print(int(_fil_nr));
  3574. SERIAL_ECHO(']');
  3575. prusa_stat_printerstatus(status_number);
  3576. prusa_stat_farm_number();
  3577. farm_timer = 2;
  3578. break;
  3579. case 5: // print not succesfull
  3580. SERIAL_ECHOPGM("{[RES:0][FIL:");
  3581. MYSERIAL.print(int(_fil_nr));
  3582. SERIAL_ECHO(']');
  3583. prusa_stat_printerstatus(status_number);
  3584. prusa_stat_farm_number();
  3585. farm_timer = 2;
  3586. break;
  3587. case 6: // print done
  3588. SERIAL_ECHOPGM("{[PRN:8]");
  3589. prusa_stat_farm_number();
  3590. status_number = 8;
  3591. farm_timer = 2;
  3592. break;
  3593. case 7: // print done - stopped
  3594. SERIAL_ECHOPGM("{[PRN:9]");
  3595. prusa_stat_farm_number();
  3596. status_number = 9;
  3597. farm_timer = 2;
  3598. break;
  3599. case 8: // printer started
  3600. SERIAL_ECHOPGM("{[PRN:0]");
  3601. prusa_stat_farm_number();
  3602. status_number = 0;
  3603. farm_timer = 2;
  3604. break;
  3605. case 20: // echo farm no
  3606. SERIAL_ECHO('{');
  3607. prusa_stat_printerstatus(status_number);
  3608. prusa_stat_farm_number();
  3609. farm_timer = 4;
  3610. break;
  3611. case 21: // temperatures
  3612. SERIAL_ECHO('{');
  3613. prusa_stat_temperatures();
  3614. prusa_stat_farm_number();
  3615. prusa_stat_printerstatus(status_number);
  3616. break;
  3617. case 22: // waiting for filament change
  3618. SERIAL_ECHOPGM("{[PRN:5]");
  3619. prusa_stat_farm_number();
  3620. status_number = 5;
  3621. break;
  3622. case 90: // Error - Thermal Runaway
  3623. prusa_statistics_err('1');
  3624. break;
  3625. case 91: // Error - Thermal Runaway Preheat
  3626. prusa_statistics_err('2');
  3627. break;
  3628. case 92: // Error - Min temp
  3629. prusa_statistics_err('3');
  3630. break;
  3631. case 93: // Error - Max temp
  3632. prusa_statistics_err('4');
  3633. break;
  3634. case 99: // heartbeat
  3635. SERIAL_ECHOPGM("{[PRN:99]");
  3636. prusa_stat_temperatures();
  3637. prusa_stat_farm_number();
  3638. break;
  3639. }
  3640. SERIAL_ECHOLN('}');
  3641. }
  3642. static void prusa_stat_printerstatus(int _status)
  3643. {
  3644. SERIAL_ECHOPGM("[PRN:");
  3645. SERIAL_ECHO(_status);
  3646. SERIAL_ECHO(']');
  3647. }
  3648. static void prusa_stat_farm_number() {
  3649. SERIAL_ECHOPGM("[PFN:0]");
  3650. }
  3651. static void prusa_stat_diameter() {
  3652. SERIAL_ECHOPGM("[DIA:");
  3653. SERIAL_ECHO(eeprom_read_word((uint16_t*)EEPROM_NOZZLE_DIAMETER_uM));
  3654. SERIAL_ECHO(']');
  3655. }
  3656. static void prusa_stat_temperatures()
  3657. {
  3658. SERIAL_ECHOPGM("[ST0:");
  3659. SERIAL_ECHO(target_temperature[0]);
  3660. SERIAL_ECHOPGM("][STB:");
  3661. SERIAL_ECHO(target_temperature_bed);
  3662. SERIAL_ECHOPGM("][AT0:");
  3663. SERIAL_ECHO(current_temperature[0]);
  3664. SERIAL_ECHOPGM("][ATB:");
  3665. SERIAL_ECHO(current_temperature_bed);
  3666. SERIAL_ECHO(']');
  3667. }
  3668. static void prusa_stat_printinfo()
  3669. {
  3670. SERIAL_ECHOPGM("[TFU:");
  3671. SERIAL_ECHO(total_filament_used);
  3672. SERIAL_ECHOPGM("][PCD:");
  3673. SERIAL_ECHO(itostr3(card.percentDone()));
  3674. SERIAL_ECHOPGM("][FEM:");
  3675. SERIAL_ECHO(itostr3(feedmultiply));
  3676. SERIAL_ECHOPGM("][FNM:");
  3677. SERIAL_ECHO(card.longFilename[0] ? card.longFilename : card.filename);
  3678. SERIAL_ECHOPGM("][TIM:");
  3679. if (starttime != 0)
  3680. {
  3681. SERIAL_ECHO(_millis() / 1000 - starttime / 1000);
  3682. }
  3683. else
  3684. {
  3685. SERIAL_ECHO(0);
  3686. }
  3687. SERIAL_ECHOPGM("][FWR:");
  3688. SERIAL_ECHORPGM(FW_VERSION_STR_P());
  3689. SERIAL_ECHO(']');
  3690. prusa_stat_diameter();
  3691. }
  3692. /*
  3693. void lcd_pick_babystep(){
  3694. int enc_dif = 0;
  3695. int cursor_pos = 1;
  3696. int fsm = 0;
  3697. lcd_clear();
  3698. lcd_set_cursor(0, 0);
  3699. lcd_puts_P(_i("Pick print"));////MSG_PICK_Z
  3700. lcd_set_cursor(3, 2);
  3701. lcd_print('1');
  3702. lcd_set_cursor(3, 3);
  3703. lcd_print('2');
  3704. lcd_set_cursor(12, 2);
  3705. lcd_print('3');
  3706. lcd_set_cursor(12, 3);
  3707. lcd_print('4');
  3708. lcd_set_cursor(1, 2);
  3709. lcd_print('>');
  3710. enc_dif = lcd_encoder_diff;
  3711. while (fsm == 0) {
  3712. manage_heater();
  3713. manage_inactivity(true);
  3714. if ( abs((enc_dif - lcd_encoder_diff)) > 4 ) {
  3715. if ( (abs(enc_dif - lcd_encoder_diff)) > 1 ) {
  3716. if (enc_dif > lcd_encoder_diff ) {
  3717. cursor_pos --;
  3718. }
  3719. if (enc_dif < lcd_encoder_diff ) {
  3720. cursor_pos ++;
  3721. }
  3722. if (cursor_pos > 4) {
  3723. cursor_pos = 4;
  3724. }
  3725. if (cursor_pos < 1) {
  3726. cursor_pos = 1;
  3727. }
  3728. lcd_set_cursor(1, 2);
  3729. lcd_print(' ');
  3730. lcd_set_cursor(1, 3);
  3731. lcd_print(' ');
  3732. lcd_set_cursor(10, 2);
  3733. lcd_print(' ');
  3734. lcd_set_cursor(10, 3);
  3735. lcd_print(' ');
  3736. if (cursor_pos < 3) {
  3737. lcd_set_cursor(1, cursor_pos+1);
  3738. lcd_print('>');
  3739. }else{
  3740. lcd_set_cursor(10, cursor_pos-1);
  3741. lcd_print('>');
  3742. }
  3743. enc_dif = lcd_encoder_diff;
  3744. _delay(100);
  3745. }
  3746. }
  3747. if (lcd_clicked()) {
  3748. fsm = cursor_pos;
  3749. int babyStepZ;
  3750. EEPROM_read_B(EEPROM_BABYSTEP_Z0+((fsm-1)*2),&babyStepZ);
  3751. EEPROM_save_B(EEPROM_BABYSTEP_Z,&babyStepZ);
  3752. calibration_status_store(CALIBRATION_STATUS_CALIBRATED);
  3753. _delay(500);
  3754. }
  3755. };
  3756. lcd_clear();
  3757. lcd_return_to_status();
  3758. }
  3759. */
  3760. void lcd_move_menu_axis()
  3761. {
  3762. MENU_BEGIN();
  3763. MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
  3764. MENU_ITEM_SUBMENU_P(_i("Move X"), lcd_move_x);////MSG_MOVE_X c=18
  3765. MENU_ITEM_SUBMENU_P(_i("Move Y"), lcd_move_y);////MSG_MOVE_Y c=18
  3766. MENU_ITEM_SUBMENU_P(_i("Move Z"), lcd_move_z);////MSG_MOVE_Z c=18
  3767. MENU_ITEM_SUBMENU_P(_T(MSG_EXTRUDER), lcd_move_e);
  3768. MENU_END();
  3769. }
  3770. static void lcd_move_menu_1mm()
  3771. {
  3772. move_menu_scale = 1.0;
  3773. lcd_move_menu_axis();
  3774. }
  3775. void EEPROM_save(int pos, uint8_t* value, uint8_t size)
  3776. {
  3777. do
  3778. {
  3779. eeprom_write_byte((unsigned char*)pos, *value);
  3780. pos++;
  3781. value++;
  3782. } while (--size);
  3783. }
  3784. void EEPROM_read(int pos, uint8_t* value, uint8_t size)
  3785. {
  3786. do
  3787. {
  3788. *value = eeprom_read_byte((unsigned char*)pos);
  3789. pos++;
  3790. value++;
  3791. } while (--size);
  3792. }
  3793. #ifdef SDCARD_SORT_ALPHA
  3794. static void lcd_sort_type_set() {
  3795. uint8_t sdSort;
  3796. EEPROM_read(EEPROM_SD_SORT, (uint8_t*)&sdSort, sizeof(sdSort));
  3797. switch (sdSort) {
  3798. case SD_SORT_TIME: sdSort = SD_SORT_ALPHA; break;
  3799. case SD_SORT_ALPHA: sdSort = SD_SORT_NONE; break;
  3800. default: sdSort = SD_SORT_TIME;
  3801. }
  3802. eeprom_update_byte((unsigned char *)EEPROM_SD_SORT, sdSort);
  3803. card.presort_flag = true;
  3804. }
  3805. #endif //SDCARD_SORT_ALPHA
  3806. #ifdef TMC2130
  3807. static void lcd_crash_mode_info()
  3808. {
  3809. lcd_update_enable(true);
  3810. static uint32_t tim = 0;
  3811. if ((tim + 1000) < _millis())
  3812. {
  3813. lcd_clear();
  3814. fputs_P(_i("Crash detection can\nbe turned on only in\nNormal mode"), lcdout);////MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
  3815. tim = _millis();
  3816. }
  3817. menu_back_if_clicked();
  3818. }
  3819. static void lcd_crash_mode_info2()
  3820. {
  3821. lcd_update_enable(true);
  3822. static uint32_t tim = 0;
  3823. if ((tim + 1000) < _millis())
  3824. {
  3825. lcd_clear();
  3826. fputs_P(_i("WARNING:\nCrash detection\ndisabled in\nStealth mode"), lcdout);////MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
  3827. tim = _millis();
  3828. }
  3829. menu_back_if_clicked();
  3830. }
  3831. #endif //TMC2130
  3832. #ifdef FILAMENT_SENSOR
  3833. static void lcd_filament_autoload_info()
  3834. {
  3835. uint8_t nlines;
  3836. lcd_update_enable(true);
  3837. static uint32_t tim = 0;
  3838. if ((tim + 1000) < _millis())
  3839. {
  3840. lcd_display_message_fullscreen_nonBlocking_P(_i("Autoloading filament available only when filament sensor is turned on..."), nlines); ////MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
  3841. tim = _millis();
  3842. }
  3843. menu_back_if_clicked();
  3844. }
  3845. static void lcd_fsensor_fail()
  3846. {
  3847. uint8_t nlines;
  3848. lcd_update_enable(true);
  3849. static uint32_t tim = 0;
  3850. if ((tim + 1000) < _millis())
  3851. {
  3852. lcd_display_message_fullscreen_nonBlocking_P(_i("ERROR: Filament sensor is not responding, please check connection."), nlines);////MSG_FSENS_NOT_RESPONDING c=20 r=4
  3853. tim = _millis();
  3854. }
  3855. menu_back_if_clicked();
  3856. }
  3857. #endif //FILAMENT_SENSOR
  3858. //-//
  3859. static void lcd_sound_state_set(void)
  3860. {
  3861. Sound_CycleState();
  3862. }
  3863. #ifndef MMU_FORCE_STEALTH_MODE
  3864. static void lcd_silent_mode_mmu_set() {
  3865. if (SilentModeMenu_MMU == 1) SilentModeMenu_MMU = 0;
  3866. else SilentModeMenu_MMU = 1;
  3867. //saving to eeprom is done in mmu_loop() after mmu actually switches state and confirms with "ok"
  3868. }
  3869. #endif //MMU_FORCE_STEALTH_MODE
  3870. static void lcd_silent_mode_set() {
  3871. switch (SilentModeMenu) {
  3872. #ifdef TMC2130
  3873. case SILENT_MODE_NORMAL: SilentModeMenu = SILENT_MODE_STEALTH; break;
  3874. case SILENT_MODE_STEALTH: SilentModeMenu = SILENT_MODE_NORMAL; break;
  3875. default: SilentModeMenu = SILENT_MODE_NORMAL; break; // (probably) not needed
  3876. #else
  3877. case SILENT_MODE_POWER: SilentModeMenu = SILENT_MODE_SILENT; break;
  3878. case SILENT_MODE_SILENT: SilentModeMenu = SILENT_MODE_AUTO; break;
  3879. case SILENT_MODE_AUTO: SilentModeMenu = SILENT_MODE_POWER; break;
  3880. default: SilentModeMenu = SILENT_MODE_POWER; break; // (probably) not needed
  3881. #endif //TMC2130
  3882. }
  3883. eeprom_update_byte((unsigned char *)EEPROM_SILENT, SilentModeMenu);
  3884. #ifdef TMC2130
  3885. lcd_display_message_fullscreen_P(_i("Mode change in progress..."));////MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
  3886. // Wait until the planner queue is drained and the stepper routine achieves
  3887. // an idle state.
  3888. st_synchronize();
  3889. if (tmc2130_wait_standstill_xy(1000)) {}
  3890. // MYSERIAL.print("standstill OK");
  3891. // else
  3892. // MYSERIAL.print("standstill NG!");
  3893. cli();
  3894. tmc2130_mode = (SilentModeMenu != SILENT_MODE_NORMAL)?TMC2130_MODE_SILENT:TMC2130_MODE_NORMAL;
  3895. update_mode_profile();
  3896. tmc2130_init(TMCInitParams(false, FarmOrUserECool()));
  3897. // We may have missed a stepper timer interrupt due to the time spent in tmc2130_init.
  3898. // Be safe than sorry, reset the stepper timer before re-enabling interrupts.
  3899. st_reset_timer();
  3900. sei();
  3901. #endif //TMC2130
  3902. st_current_init();
  3903. #ifdef TMC2130
  3904. if (lcd_crash_detect_enabled() && (SilentModeMenu != SILENT_MODE_NORMAL))
  3905. menu_submenu(lcd_crash_mode_info2);
  3906. lcd_encoder_diff=0; // reset 'encoder buffer'
  3907. #endif //TMC2130
  3908. }
  3909. #ifdef TMC2130
  3910. static void crash_mode_switch()
  3911. {
  3912. if (lcd_crash_detect_enabled())
  3913. {
  3914. lcd_crash_detect_disable();
  3915. }
  3916. else
  3917. {
  3918. lcd_crash_detect_enable();
  3919. }
  3920. if (IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LcdCommands::Layer1Cal)) menu_goto(lcd_tune_menu, 9, true, true);
  3921. else menu_goto(lcd_settings_menu, 9, true, true);
  3922. }
  3923. #endif //TMC2130
  3924. #ifdef FILAMENT_SENSOR
  3925. static void lcd_fsensor_state_set()
  3926. {
  3927. FSensorStateMenu = !FSensorStateMenu; //set also from fsensor_enable() and fsensor_disable()
  3928. if (!FSensorStateMenu) {
  3929. fsensor_disable();
  3930. if (fsensor_autoload_enabled && !mmu_enabled)
  3931. menu_submenu(lcd_filament_autoload_info);
  3932. }
  3933. else {
  3934. fsensor_enable();
  3935. if (fsensor_not_responding && !mmu_enabled)
  3936. menu_submenu(lcd_fsensor_fail);
  3937. }
  3938. }
  3939. #endif //FILAMENT_SENSOR
  3940. void lcd_set_degree() {
  3941. lcd_set_custom_characters_degree();
  3942. }
  3943. #if (LANG_MODE != 0)
  3944. void menu_setlang(unsigned char lang)
  3945. {
  3946. if (!lang_select(lang))
  3947. {
  3948. if (lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Copy selected language?"), false, true))////MSG_COPY_SEL_LANG c=20 r=3
  3949. lang_boot_update_start(lang);
  3950. lcd_update_enable(true);
  3951. lcd_clear();
  3952. menu_goto(lcd_language_menu, 0, true, true);
  3953. lcd_timeoutToStatus.stop(); //infinite timeout
  3954. lcd_draw_update = 2;
  3955. }
  3956. }
  3957. #ifdef COMMUNITY_LANG_SUPPORT
  3958. #ifdef XFLASH
  3959. static void lcd_community_language_menu()
  3960. {
  3961. MENU_BEGIN();
  3962. uint8_t cnt = lang_get_count();
  3963. MENU_ITEM_BACK_P(_i("Select language")); //Back to previous Menu
  3964. for (int i = 8; i < cnt; i++) //all community languages
  3965. if (menu_item_text_P(lang_get_name_by_code(lang_get_code(i))))
  3966. {
  3967. menu_setlang(i);
  3968. return;
  3969. }
  3970. MENU_END();
  3971. }
  3972. #endif //XFLASH
  3973. #endif //COMMUNITY_LANG_SUPPORT && W52X20CL
  3974. static void lcd_language_menu()
  3975. {
  3976. MENU_BEGIN();
  3977. if (lang_is_selected()) MENU_ITEM_BACK_P(_T(MSG_SETTINGS)); //
  3978. if (menu_item_text_P(lang_get_name_by_code(lang_get_code(0)))) //primary language
  3979. {
  3980. menu_setlang(0);
  3981. return;
  3982. }
  3983. uint8_t cnt = lang_get_count();
  3984. #ifdef XFLASH
  3985. if (cnt == 2) //display secondary language in case of clear xflash
  3986. {
  3987. if (menu_item_text_P(lang_get_name_by_code(lang_get_code(1))))
  3988. {
  3989. menu_setlang(1);
  3990. return;
  3991. }
  3992. }
  3993. else
  3994. for (int i = 2; i < 8; i++) //skip seconday language - solved in lang_select (MK3) 'i < 8' for 7 official languages
  3995. #else //XFLASH
  3996. for (int i = 1; i < cnt; i++) //all seconday languages (MK2/25)
  3997. #endif //XFLASH
  3998. if (menu_item_text_P(lang_get_name_by_code(lang_get_code(i))))
  3999. {
  4000. menu_setlang(i);
  4001. return;
  4002. }
  4003. #ifdef COMMUNITY_LANG_SUPPORT
  4004. #ifdef XFLASH
  4005. MENU_ITEM_SUBMENU_P(_T(MSG_COMMUNITY_MADE), lcd_community_language_menu); ////MSG_COMMUNITY_MADE c=18
  4006. #endif //XFLASH
  4007. #endif //COMMUNITY_LANG_SUPPORT && W52X20CL
  4008. MENU_END();
  4009. }
  4010. #endif //(LANG_MODE != 0)
  4011. void lcd_mesh_bedleveling()
  4012. {
  4013. mesh_bed_run_from_menu = true;
  4014. enquecommand_P(PSTR("G80"));
  4015. lcd_return_to_status();
  4016. }
  4017. void lcd_mesh_calibration()
  4018. {
  4019. enquecommand_P(PSTR("M45"));
  4020. lcd_return_to_status();
  4021. }
  4022. void lcd_mesh_calibration_z()
  4023. {
  4024. enquecommand_P(PSTR("M45 Z"));
  4025. lcd_return_to_status();
  4026. }
  4027. void lcd_pinda_calibration_menu()
  4028. {
  4029. MENU_BEGIN();
  4030. MENU_ITEM_BACK_P(_T(MSG_MENU_CALIBRATION));
  4031. MENU_ITEM_SUBMENU_P(_i("Calibrate"), lcd_calibrate_pinda);////MSG_CALIBRATE_PINDA c=17
  4032. MENU_END();
  4033. }
  4034. void lcd_temp_calibration_set() {
  4035. bool temp_cal_active = eeprom_read_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE);
  4036. temp_cal_active = !temp_cal_active;
  4037. eeprom_update_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE, temp_cal_active);
  4038. }
  4039. #ifdef HAS_SECOND_SERIAL_PORT
  4040. void lcd_second_serial_set() {
  4041. if(selectedSerialPort == 1) selectedSerialPort = 0;
  4042. else selectedSerialPort = 1;
  4043. eeprom_update_byte((unsigned char *)EEPROM_SECOND_SERIAL_ACTIVE, selectedSerialPort);
  4044. MYSERIAL.begin(BAUDRATE);
  4045. }
  4046. #endif //HAS_SECOND_SERIAL_PORT
  4047. void lcd_calibrate_pinda() {
  4048. enquecommand_P(PSTR("G76"));
  4049. lcd_return_to_status();
  4050. }
  4051. #ifndef SNMM
  4052. /*void lcd_calibrate_extruder() {
  4053. if (degHotend0() > EXTRUDE_MINTEMP)
  4054. {
  4055. current_position[E_AXIS] = 0; //set initial position to zero
  4056. plan_set_e_position(current_position[E_AXIS]);
  4057. //long steps_start = st_get_position(E_AXIS);
  4058. long steps_final;
  4059. float e_steps_per_unit;
  4060. float feedrate = (180 / axis_steps_per_unit[E_AXIS]) * 1; //3 //initial automatic extrusion feedrate (depends on current value of axis_steps_per_unit to avoid too fast extrusion)
  4061. float e_shift_calibration = (axis_steps_per_unit[E_AXIS] > 180 ) ? ((180 / axis_steps_per_unit[E_AXIS]) * 70): 70; //length of initial automatic extrusion sequence
  4062. const char *msg_e_cal_knob = _i("Rotate knob until mark reaches extruder body. Click when done.");////MSG_E_CAL_KNOB c=20 r=8
  4063. const char *msg_next_e_cal_knob = lcd_display_message_fullscreen_P(msg_e_cal_knob);
  4064. const bool multi_screen = msg_next_e_cal_knob != NULL;
  4065. unsigned long msg_millis;
  4066. lcd_show_fullscreen_message_and_wait_P(_i("Mark filament 100mm from extruder body. Click when done."));////MSG_MARK_FIL c=20 r=8
  4067. lcd_clear();
  4068. lcd_set_cursor(0, 1); lcd_puts_P(_T(MSG_PLEASE_WAIT));
  4069. current_position[E_AXIS] += e_shift_calibration;
  4070. plan_buffer_line_curposXYZE(feedrate, active_extruder);
  4071. st_synchronize();
  4072. lcd_display_message_fullscreen_P(msg_e_cal_knob);
  4073. msg_millis = _millis();
  4074. while (!LCD_CLICKED) {
  4075. if (multi_screen && _millis() - msg_millis > 5000) {
  4076. if (msg_next_e_cal_knob == NULL)
  4077. msg_next_e_cal_knob = msg_e_cal_knob;
  4078. msg_next_e_cal_knob = lcd_display_message_fullscreen_P(msg_next_e_cal_knob);
  4079. msg_millis = _millis();
  4080. }
  4081. //manage_inactivity(true);
  4082. manage_heater();
  4083. if (abs(lcd_encoder_diff) >= ENCODER_PULSES_PER_STEP) { //adjusting mark by knob rotation
  4084. delay_keep_alive(50);
  4085. //previous_millis_cmd = _millis();
  4086. lcd_encoder += (lcd_encoder_diff / ENCODER_PULSES_PER_STEP);
  4087. lcd_encoder_diff = 0;
  4088. if (!planner_queue_full()) {
  4089. current_position[E_AXIS] += float(abs((int)lcd_encoder)) * 0.01; //0.05
  4090. lcd_encoder = 0;
  4091. plan_buffer_line_curposXYZE(feedrate, active_extruder);
  4092. }
  4093. }
  4094. }
  4095. steps_final = current_position[E_AXIS] * axis_steps_per_unit[E_AXIS];
  4096. //steps_final = st_get_position(E_AXIS);
  4097. lcd_draw_update = 1;
  4098. e_steps_per_unit = ((float)(steps_final)) / 100.0f;
  4099. if (e_steps_per_unit < MIN_E_STEPS_PER_UNIT) e_steps_per_unit = MIN_E_STEPS_PER_UNIT;
  4100. if (e_steps_per_unit > MAX_E_STEPS_PER_UNIT) e_steps_per_unit = MAX_E_STEPS_PER_UNIT;
  4101. lcd_clear();
  4102. axis_steps_per_unit[E_AXIS] = e_steps_per_unit;
  4103. enquecommand_P(PSTR("M500")); //store settings to eeprom
  4104. //lcd_drawedit(PSTR("Result"), ftostr31(axis_steps_per_unit[E_AXIS]));
  4105. //delay_keep_alive(2000);
  4106. delay_keep_alive(500);
  4107. lcd_show_fullscreen_message_and_wait_P(_i("E calibration finished. Please clean the nozzle. Click when done."));////MSG_CLEAN_NOZZLE_E c=20 r=8
  4108. lcd_update_enable(true);
  4109. lcd_draw_update = 2;
  4110. }
  4111. else
  4112. {
  4113. show_preheat_nozzle_warning();
  4114. }
  4115. lcd_return_to_status();
  4116. }
  4117. void lcd_extr_cal_reset() {
  4118. float tmp1[] = DEFAULT_AXIS_STEPS_PER_UNIT;
  4119. axis_steps_per_unit[E_AXIS] = tmp1[3];
  4120. //extrudemultiply = 100;
  4121. enquecommand_P(PSTR("M500"));
  4122. }*/
  4123. #endif
  4124. void lcd_toshiba_flash_air_compatibility_toggle()
  4125. {
  4126. card.ToshibaFlashAir_enable(! card.ToshibaFlashAir_isEnabled());
  4127. eeprom_update_byte((uint8_t*)EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY, card.ToshibaFlashAir_isEnabled());
  4128. }
  4129. //! @brief Continue first layer calibration with previous value or start from zero?
  4130. //!
  4131. //! @code{.unparsed}
  4132. //! |01234567890123456789|
  4133. //! |Sheet Smooth1 actual| c=a, c=b, a+b = 13
  4134. //! |Z offset: -1.480 mm | c=a, c=b, a+b = 14
  4135. //! |>Continue | c=19
  4136. //! | Start from zero | c=19
  4137. //! ----------------------
  4138. //! @endcode
  4139. void lcd_first_layer_calibration_reset()
  4140. {
  4141. typedef struct
  4142. {
  4143. bool reset;
  4144. } MenuData;
  4145. static_assert(sizeof(menu_data)>= sizeof(MenuData),"_menu_data_t doesn't fit into menu_data");
  4146. MenuData* menuData = (MenuData*)&(menu_data[0]);
  4147. if(LCD_CLICKED || !eeprom_is_sheet_initialized(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet))) ||
  4148. (calibration_status() >= CALIBRATION_STATUS_LIVE_ADJUST) ||
  4149. (0 == static_cast<int16_t>(eeprom_read_word(reinterpret_cast<uint16_t*>
  4150. (&EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset)))))
  4151. {
  4152. if (menuData->reset)
  4153. {
  4154. eeprom_update_word(reinterpret_cast<uint16_t*>(&EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset), 0xffff);
  4155. }
  4156. menu_goto(lcd_v2_calibration,0,true,true);
  4157. }
  4158. if (lcd_encoder > 0)
  4159. {
  4160. menuData->reset = true;
  4161. lcd_encoder = 1;
  4162. }
  4163. else if (lcd_encoder < 1)
  4164. {
  4165. menuData->reset = false;
  4166. lcd_encoder = 0;
  4167. }
  4168. char sheet_name[sizeof(Sheet::name)];
  4169. eeprom_read_block(sheet_name, &EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].name, sizeof(Sheet::name));
  4170. lcd_set_cursor(0, 0);
  4171. float offset = static_cast<int16_t>(eeprom_read_word(reinterpret_cast<uint16_t*>(&EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset)))/cs.axis_steps_per_unit[Z_AXIS];
  4172. lcd_printf_P(_i("Sheet %.7s\nZ offset: %+1.3f mm\n%cContinue\n%cStart from zero"), //// \n denotes line break, %.7s is replaced by 7 character long sheet name, %+1.3f is replaced by 6 character long floating point number, %c is replaced by > or white space (one character) based on whether first or second option is selected. % denoted place holders can not be reordered. r=4
  4173. sheet_name, offset, menuData->reset ? ' ' : '>', menuData->reset ? '>' : ' ');
  4174. }
  4175. void lcd_v2_calibration()
  4176. {
  4177. if (mmu_enabled)
  4178. {
  4179. const uint8_t filament = choose_menu_P(
  4180. _i("Select filament:"), ////MSG_SELECT_FILAMENT c=20
  4181. _T(MSG_FILAMENT),(_T(MSG_CANCEL)+1)); //Hack to reuse MSG but strip 1st char off
  4182. if (filament < 5)
  4183. {
  4184. lay1cal_filament = filament;
  4185. }
  4186. else
  4187. {
  4188. menu_back();
  4189. return;
  4190. }
  4191. }
  4192. else if (!eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE))
  4193. {
  4194. bool loaded = false;
  4195. if (fsensor_enabled && ir_sensor_detected)
  4196. {
  4197. loaded = (digitalRead(IR_SENSOR_PIN) == 0);
  4198. }
  4199. else
  4200. {
  4201. loaded = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_LOADED), false, true);
  4202. lcd_update_enabled = true;
  4203. }
  4204. if (!loaded)
  4205. {
  4206. lcd_display_message_fullscreen_P(_i("Please load filament first."));////MSG_PLEASE_LOAD_PLA c=20 r=4
  4207. lcd_consume_click();
  4208. for (uint_least8_t i = 0; i < 20; i++) { //wait max. 2s
  4209. delay_keep_alive(100);
  4210. if (lcd_clicked()) {
  4211. break;
  4212. }
  4213. }
  4214. lcd_update_enabled = true;
  4215. menu_back();
  4216. return;
  4217. }
  4218. }
  4219. eFilamentAction = FilamentAction::Lay1Cal;
  4220. menu_goto(lcd_generic_preheat_menu, 0, true, true);
  4221. }
  4222. void lcd_wizard() {
  4223. bool result = true;
  4224. if (calibration_status() != CALIBRATION_STATUS_ASSEMBLED) {
  4225. result = lcd_show_multiscreen_message_yes_no_and_wait_P(_i("Running Wizard will delete current calibration results and start from the beginning. Continue?"), false, false);////MSG_WIZARD_RERUN c=20 r=7
  4226. }
  4227. if (result) {
  4228. calibration_status_store(CALIBRATION_STATUS_ASSEMBLED);
  4229. lcd_wizard(WizState::Run);
  4230. }
  4231. else {
  4232. lcd_return_to_status();
  4233. lcd_update_enable(true);
  4234. lcd_update(2);
  4235. }
  4236. }
  4237. #if (LANG_MODE != 0)
  4238. void lcd_language()
  4239. {
  4240. lcd_update_enable(true);
  4241. lcd_clear();
  4242. menu_goto(lcd_language_menu, 0, true, true);
  4243. lcd_timeoutToStatus.stop(); //infinite timeout
  4244. lcd_draw_update = 2;
  4245. while ((menu_menu != lcd_status_screen) && (!lang_is_selected()))
  4246. {
  4247. _delay(50);
  4248. lcd_update(0);
  4249. manage_heater();
  4250. manage_inactivity(true);
  4251. }
  4252. if (lang_is_selected())
  4253. lcd_return_to_status();
  4254. else
  4255. lang_select(LANG_ID_PRI);
  4256. }
  4257. #endif
  4258. static void wait_preheat()
  4259. {
  4260. current_position[Z_AXIS] = 100; //move in z axis to make space for loading filament
  4261. plan_buffer_line_curposXYZE(homing_feedrate[Z_AXIS] / 60);
  4262. delay_keep_alive(2000);
  4263. lcd_display_message_fullscreen_P(_T(MSG_WIZARD_HEATING));
  4264. lcd_set_custom_characters();
  4265. while (abs(degHotend(0) - degTargetHotend(0)) > 3) {
  4266. lcd_display_message_fullscreen_P(_T(MSG_WIZARD_HEATING));
  4267. lcd_set_cursor(0, 4);
  4268. //Print the hotend temperature (9 chars total)
  4269. lcdui_print_temp(LCD_STR_THERMOMETER[0], (int)(degHotend(0) + 0.5), (int)(degTargetHotend(0) + 0.5));
  4270. delay_keep_alive(1000);
  4271. }
  4272. }
  4273. static void lcd_wizard_load()
  4274. {
  4275. if (mmu_enabled)
  4276. {
  4277. lcd_show_fullscreen_message_and_wait_P(_i("Please insert filament into the first tube of the MMU, then press the knob to load it."));////MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
  4278. tmp_extruder = 0;
  4279. }
  4280. else
  4281. {
  4282. lcd_show_fullscreen_message_and_wait_P(_i("Please insert filament into the extruder, then press the knob to load it."));////MSG_WIZARD_LOAD_FILAMENT c=20 r=6
  4283. }
  4284. lcd_update_enable(false);
  4285. lcd_clear();
  4286. lcd_puts_at_P(0, 2, _T(MSG_LOADING_FILAMENT));
  4287. #ifdef SNMM
  4288. change_extr(0);
  4289. #endif
  4290. loading_flag = true;
  4291. gcode_M701();
  4292. }
  4293. bool lcd_autoDepleteEnabled()
  4294. {
  4295. return (lcd_autoDeplete && fsensor_enabled);
  4296. }
  4297. static void wizard_lay1cal_message(bool cold)
  4298. {
  4299. lcd_show_fullscreen_message_and_wait_P(
  4300. _i("Now I will calibrate distance between tip of the nozzle and heatbed surface.")); ////MSG_WIZARD_V2_CAL c=20 r=8
  4301. if (mmu_enabled)
  4302. {
  4303. lcd_show_fullscreen_message_and_wait_P(
  4304. _i("Choose a filament for the First Layer Calibration and select it in the on-screen menu."));////MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
  4305. }
  4306. else if (cold)
  4307. {
  4308. lcd_show_fullscreen_message_and_wait_P(
  4309. _i("Select temperature which matches your material."));////MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
  4310. }
  4311. lcd_show_fullscreen_message_and_wait_P(
  4312. _i("The printer will start printing a zig-zag line. Rotate the knob until you reach the optimal height. Check the pictures in the handbook (Calibration chapter).")); ////MSG_WIZARD_V2_CAL_2 c=20 r=12
  4313. }
  4314. //! @brief Printer first run wizard (Selftest and calibration)
  4315. //!
  4316. //!
  4317. //! First layer calibration with MMU state diagram
  4318. //!
  4319. //! @startuml
  4320. //! [*] --> IsFil
  4321. //! IsFil : Is any filament loaded?
  4322. //! LoadFilCold : Push the button to start loading Filament 1
  4323. //!
  4324. //! IsFil --> Lay1CalCold : yes
  4325. //! IsFil --> LoadFilCold : no
  4326. //! LoadFilCold --> Lay1CalCold : click
  4327. //! @enduml
  4328. //!
  4329. //! First layer calibration without MMU state diagram
  4330. //!
  4331. //! @startuml
  4332. //! [*] --> IsFil
  4333. //! IsFil : Is filament loaded?
  4334. //! Preheat : Select nozle temperature which matches your material.
  4335. //! LoadFilHot : Insert filament to extruder and press the knob.
  4336. //!
  4337. //! IsFil --> Lay1CalCold : yes
  4338. //! IsFil --> Preheat : no
  4339. //! Preheat --> LoadFilHot : select
  4340. //! LoadFilHot --> Lay1CalHot : click
  4341. //! @enduml
  4342. //!
  4343. //! @param state Entry point of the wizard
  4344. //!
  4345. //! state | description
  4346. //! ---------------------- | ----------------
  4347. //! WizState::Run | Main entry point
  4348. //! WizState::RepeatLay1Cal | Entry point after passing 1st layer calibration
  4349. //! WizState::LoadFilHot | Entry point after temporarily left for preheat before load filament
  4350. void lcd_wizard(WizState state)
  4351. {
  4352. using S = WizState;
  4353. bool end = false;
  4354. int8_t wizard_event;
  4355. const char *msg = NULL;
  4356. // Make sure EEPROM_WIZARD_ACTIVE is true if entering using different entry point
  4357. // other than WizState::Run - it is useful for debugging wizard.
  4358. if (state != S::Run) eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 1);
  4359. FORCE_BL_ON_START;
  4360. while (!end) {
  4361. printf_P(PSTR("Wizard state: %d\n"), state);
  4362. switch (state) {
  4363. case S::Run: //Run wizard?
  4364. // 2019-08-07 brutal hack - solving the "viper" situation.
  4365. // It is caused by the fact, that tmc2130_st_isr makes a crash detection before the printers really starts.
  4366. // And thus it calles stop_and_save_print_to_ram which sets the saved_printing flag.
  4367. // Having this flag set during normal printing is lethal - mesh_plan_buffer_line exist in the middle of planning long travels
  4368. // which results in distorted print.
  4369. // This primarily happens when the printer is new and parked in 0,0
  4370. // So any new printer will fail the first layer calibration unless being reset or the Stop function gets called.
  4371. // We really must find a way to prevent the crash from happening before the printer is started - that would be the correct solution.
  4372. // Btw. the flag may even trigger the viper situation on normal start this way and the user won't be able to find out why.
  4373. saved_printing = false;
  4374. if( eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE)==2){
  4375. lcd_show_fullscreen_message_and_wait_P(_T(MSG_WIZARD_WELCOME_SHIPPING));
  4376. state = S::Restore;
  4377. } else {
  4378. wizard_event = lcd_show_multiscreen_message_yes_no_and_wait_P(_T(MSG_WIZARD_WELCOME), false, true);
  4379. if (wizard_event) {
  4380. state = S::Restore;
  4381. eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 1);
  4382. } else {
  4383. eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 0);
  4384. end = true;
  4385. }
  4386. }
  4387. break;
  4388. case S::Restore:
  4389. switch (calibration_status()) {
  4390. case CALIBRATION_STATUS_ASSEMBLED: state = S::Selftest; break; //run selftest
  4391. case CALIBRATION_STATUS_XYZ_CALIBRATION: state = S::Xyz; break; //run xyz cal.
  4392. case CALIBRATION_STATUS_Z_CALIBRATION: state = S::Z; break; //run z cal.
  4393. case CALIBRATION_STATUS_LIVE_ADJUST: state = S::IsFil; break; //run live adjust
  4394. case CALIBRATION_STATUS_CALIBRATED: end = true; eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 0); break;
  4395. default: state = S::Selftest; break; //if calibration status is unknown, run wizard from the beginning
  4396. }
  4397. break;
  4398. case S::Selftest:
  4399. lcd_show_fullscreen_message_and_wait_P(_i("First, I will run the selftest to check most common assembly problems."));////MSG_WIZARD_SELFTEST c=20 r=8
  4400. wizard_event = lcd_selftest();
  4401. if (wizard_event) {
  4402. calibration_status_store(CALIBRATION_STATUS_XYZ_CALIBRATION);
  4403. state = S::Xyz;
  4404. }
  4405. else end = true;
  4406. break;
  4407. case S::Xyz:
  4408. lcd_show_fullscreen_message_and_wait_P(_i("I will run xyz calibration now. It will take approx. 12 mins."));////MSG_WIZARD_XYZ_CAL c=20 r=8
  4409. wizard_event = gcode_M45(false, 0);
  4410. if (wizard_event) state = S::IsFil;
  4411. else end = true;
  4412. break;
  4413. case S::Z:
  4414. lcd_show_fullscreen_message_and_wait_P(_i("Please remove shipping helpers first."));////MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
  4415. lcd_show_fullscreen_message_and_wait_P(_i("Now remove the test print from steel sheet."));////MSG_REMOVE_TEST_PRINT c=20 r=4
  4416. lcd_show_fullscreen_message_and_wait_P(_i("I will run z calibration now."));////MSG_WIZARD_Z_CAL c=20 r=8
  4417. wizard_event = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_STEEL_SHEET_CHECK), false, false);
  4418. if (!wizard_event) lcd_show_fullscreen_message_and_wait_P(_T(MSG_PLACE_STEEL_SHEET));
  4419. wizard_event = gcode_M45(true, 0);
  4420. if (wizard_event) {
  4421. //current filament needs to be unloaded and then new filament should be loaded
  4422. //start to preheat nozzle for unloading remaining PLA filament
  4423. setTargetHotend(PLA_PREHEAT_HOTEND_TEMP, 0);
  4424. lcd_display_message_fullscreen_P(_i("Now I will preheat nozzle for PLA."));
  4425. wait_preheat();
  4426. //unload current filament
  4427. unload_filament(true);
  4428. //load filament
  4429. lcd_wizard_load();
  4430. setTargetHotend(0, 0); //we are finished, cooldown nozzle
  4431. state = S::Finish; //shipped, no need to set first layer, go to final message directly
  4432. }
  4433. else end = true;
  4434. break;
  4435. case S::IsFil:
  4436. //start to preheat nozzle and bed to save some time later
  4437. setTargetHotend(PLA_PREHEAT_HOTEND_TEMP, 0);
  4438. setTargetBed(PLA_PREHEAT_HPB_TEMP);
  4439. if (mmu_enabled)
  4440. {
  4441. wizard_event = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_LOADED), true);
  4442. } else
  4443. {
  4444. wizard_event = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_LOADED), true);
  4445. }
  4446. if (wizard_event) state = S::Lay1CalCold;
  4447. else
  4448. {
  4449. if(mmu_enabled) state = S::LoadFilCold;
  4450. else state = S::Preheat;
  4451. }
  4452. break;
  4453. case S::Preheat:
  4454. menu_goto(lcd_preheat_menu,0,false,true);
  4455. lcd_show_fullscreen_message_and_wait_P(_i("Select nozzle preheat temperature which matches your material."));////MSG_SEL_PREHEAT_TEMP c=20 r=6
  4456. end = true; // Leave wizard temporarily for lcd_preheat_menu
  4457. break;
  4458. case S::LoadFilHot:
  4459. wait_preheat();
  4460. lcd_wizard_load();
  4461. state = S::Lay1CalHot;
  4462. break;
  4463. case S::LoadFilCold:
  4464. lcd_wizard_load();
  4465. state = S::Lay1CalCold;
  4466. break;
  4467. case S::Lay1CalCold:
  4468. wizard_lay1cal_message(true);
  4469. menu_goto(lcd_v2_calibration,0,false,true);
  4470. end = true; // Leave wizard temporarily for lcd_v2_calibration
  4471. break;
  4472. case S::Lay1CalHot:
  4473. wizard_lay1cal_message(false);
  4474. lcd_commands_type = LcdCommands::Layer1Cal;
  4475. end = true; // Leave wizard temporarily for lcd_v2_calibration
  4476. break;
  4477. case S::RepeatLay1Cal:
  4478. wizard_event = lcd_show_multiscreen_message_yes_no_and_wait_P(_i("Do you want to repeat last step to readjust distance between nozzle and heatbed?"), false);////MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
  4479. if (wizard_event)
  4480. {
  4481. lcd_show_fullscreen_message_and_wait_P(_i("Please clean heatbed and then press the knob."));////MSG_WIZARD_CLEAN_HEATBED c=20 r=8
  4482. state = S::Lay1CalCold;
  4483. }
  4484. else
  4485. {
  4486. lcd_show_fullscreen_message_and_wait_P(_i("If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets."));////MSG_ADDITIONAL_SHEETS c=20 r=9
  4487. state = S::Finish;
  4488. }
  4489. break;
  4490. case S::Finish:
  4491. eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 0);
  4492. end = true;
  4493. break;
  4494. default: break;
  4495. }
  4496. }
  4497. FORCE_BL_ON_END;
  4498. printf_P(_N("Wizard end state: %d\n"), state);
  4499. switch (state) { //final message
  4500. case S::Restore: //printer was already calibrated
  4501. msg = _T(MSG_WIZARD_DONE);
  4502. break;
  4503. case S::Selftest: //selftest
  4504. case S::Xyz: //xyz cal.
  4505. case S::Z: //z cal.
  4506. msg = _T(MSG_WIZARD_CALIBRATION_FAILED);
  4507. break;
  4508. case S::Finish: //we are finished
  4509. msg = _T(MSG_WIZARD_DONE);
  4510. lcd_reset_alert_level();
  4511. lcd_setstatuspgm(_T(WELCOME_MSG));
  4512. lcd_return_to_status();
  4513. break;
  4514. default:
  4515. msg = _T(MSG_WIZARD_QUIT);
  4516. break;
  4517. }
  4518. if (!((S::Lay1CalCold == state) || (S::Lay1CalHot == state) || (S::Preheat == state)))
  4519. {
  4520. lcd_show_fullscreen_message_and_wait_P(msg);
  4521. }
  4522. lcd_update_enable(true);
  4523. lcd_update(2);
  4524. }
  4525. #ifdef TMC2130
  4526. void lcd_settings_linearity_correction_menu(void)
  4527. {
  4528. MENU_BEGIN();
  4529. ON_MENU_LEAVE(
  4530. lcd_settings_linearity_correction_menu_save();
  4531. );
  4532. MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
  4533. #ifdef TMC2130_LINEARITY_CORRECTION_XYZ
  4534. //tmc2130_wave_fac[X_AXIS]
  4535. MENU_ITEM_EDIT_int3_P(_i("X-correct:"), &tmc2130_wave_fac[X_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_X_CORRECTION c=13
  4536. MENU_ITEM_EDIT_int3_P(_i("Y-correct:"), &tmc2130_wave_fac[Y_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_Y_CORRECTION c=13
  4537. MENU_ITEM_EDIT_int3_P(_i("Z-correct:"), &tmc2130_wave_fac[Z_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_Z_CORRECTION c=13
  4538. #endif //TMC2130_LINEARITY_CORRECTION_XYZ
  4539. MENU_ITEM_EDIT_int3_P(_i("E-correct:"), &tmc2130_wave_fac[E_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_EXTRUDER_CORRECTION c=13
  4540. MENU_END();
  4541. }
  4542. #endif // TMC2130
  4543. #ifdef FILAMENT_SENSOR
  4544. #define SETTINGS_FILAMENT_SENSOR \
  4545. do\
  4546. {\
  4547. if (FSensorStateMenu == 0)\
  4548. {\
  4549. if (fsensor_not_responding && (mmu_enabled == false))\
  4550. {\
  4551. /* Filament sensor not working*/\
  4552. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_NA), lcd_fsensor_state_set);/*////MSG_FSENSOR_NA*/\
  4553. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), NULL, lcd_fsensor_fail);\
  4554. }\
  4555. else\
  4556. {\
  4557. /* Filament sensor turned off, working, no problems*/\
  4558. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_OFF), lcd_fsensor_state_set);\
  4559. if (mmu_enabled == false)\
  4560. {\
  4561. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), NULL, lcd_filament_autoload_info);\
  4562. }\
  4563. }\
  4564. }\
  4565. else\
  4566. {\
  4567. /* Filament sensor turned on, working, no problems*/\
  4568. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_ON), lcd_fsensor_state_set);\
  4569. if (mmu_enabled == false)\
  4570. {\
  4571. if (fsensor_autoload_enabled)\
  4572. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), _T(MSG_ON), lcd_set_filament_autoload);/*////MSG_FSENS_AUTOLOAD_ON c=17*/\
  4573. else\
  4574. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), _T(MSG_OFF), lcd_set_filament_autoload);/*////MSG_FSENS_AUTOLOAD_OFF c=17*/\
  4575. /*if (fsensor_oq_meassure_enabled)*/\
  4576. /*MENU_ITEM_FUNCTION_P(_i("F. OQ meass. [on]"), lcd_set_filament_oq_meass);*//*////MSG_FSENS_OQMEASS_ON c=17*/\
  4577. /*else*/\
  4578. /*MENU_ITEM_FUNCTION_P(_i("F. OQ meass.[off]"), lcd_set_filament_oq_meass);*//*////MSG_FSENS_OQMEASS_OFF c=17*/\
  4579. }\
  4580. }\
  4581. }\
  4582. while(0)
  4583. #else //FILAMENT_SENSOR
  4584. #define SETTINGS_FILAMENT_SENSOR do{}while(0)
  4585. #endif //FILAMENT_SENSOR
  4586. static void auto_deplete_switch()
  4587. {
  4588. lcd_autoDeplete = !lcd_autoDeplete;
  4589. eeprom_update_byte((unsigned char *)EEPROM_AUTO_DEPLETE, lcd_autoDeplete);
  4590. }
  4591. static void settingsAutoDeplete()
  4592. {
  4593. if (mmu_enabled)
  4594. {
  4595. if (!fsensor_enabled)
  4596. {
  4597. MENU_ITEM_TOGGLE_P(_T(MSG_AUTO_DEPLETE), _T(MSG_NA), NULL);
  4598. }
  4599. else if (lcd_autoDeplete)
  4600. {
  4601. MENU_ITEM_TOGGLE_P(_T(MSG_AUTO_DEPLETE), _T(MSG_ON), auto_deplete_switch);
  4602. }
  4603. else
  4604. {
  4605. MENU_ITEM_TOGGLE_P(_T(MSG_AUTO_DEPLETE), _T(MSG_OFF), auto_deplete_switch);
  4606. }
  4607. }
  4608. }
  4609. #define SETTINGS_AUTO_DEPLETE \
  4610. do\
  4611. {\
  4612. settingsAutoDeplete();\
  4613. }\
  4614. while(0)\
  4615. #ifdef MMU_HAS_CUTTER
  4616. static void settingsCutter()
  4617. {
  4618. if (mmu_enabled)
  4619. {
  4620. if (EEPROM_MMU_CUTTER_ENABLED_enabled == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
  4621. {
  4622. MENU_ITEM_TOGGLE_P(_T(MSG_CUTTER), _T(MSG_ON), lcd_cutter_enabled);
  4623. }
  4624. #ifdef MMU_ALWAYS_CUT
  4625. else if (EEPROM_MMU_CUTTER_ENABLED_always == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
  4626. {
  4627. MENU_ITEM_TOGGLE_P(_T(MSG_CUTTER), _i("Always"), lcd_cutter_enabled);
  4628. }
  4629. #endif
  4630. else
  4631. {
  4632. MENU_ITEM_TOGGLE_P(_T(MSG_CUTTER), _T(MSG_OFF), lcd_cutter_enabled);
  4633. }
  4634. }
  4635. }
  4636. #define SETTINGS_CUTTER \
  4637. do\
  4638. {\
  4639. settingsCutter();\
  4640. }\
  4641. while(0)
  4642. #else
  4643. #define SETTINGS_CUTTER
  4644. #endif //MMU_HAS_CUTTER
  4645. #ifdef TMC2130
  4646. #define SETTINGS_SILENT_MODE \
  4647. do\
  4648. {\
  4649. if(!farm_mode)\
  4650. {\
  4651. if (SilentModeMenu == SILENT_MODE_NORMAL)\
  4652. {\
  4653. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_NORMAL), lcd_silent_mode_set);\
  4654. }\
  4655. else MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_STEALTH), lcd_silent_mode_set);\
  4656. if (SilentModeMenu == SILENT_MODE_NORMAL)\
  4657. {\
  4658. if (lcd_crash_detect_enabled()) MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_ON), crash_mode_switch);\
  4659. else MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_OFF), crash_mode_switch);\
  4660. }\
  4661. else MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), NULL, lcd_crash_mode_info);\
  4662. }\
  4663. }\
  4664. while (0)
  4665. #else //TMC2130
  4666. #define SETTINGS_SILENT_MODE \
  4667. do\
  4668. {\
  4669. if(!farm_mode)\
  4670. {\
  4671. switch (SilentModeMenu)\
  4672. {\
  4673. case SILENT_MODE_POWER:\
  4674. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set);\
  4675. break;\
  4676. case SILENT_MODE_SILENT:\
  4677. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_SILENT), lcd_silent_mode_set);\
  4678. break;\
  4679. case SILENT_MODE_AUTO:\
  4680. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_AUTO_POWER), lcd_silent_mode_set);\
  4681. break;\
  4682. default:\
  4683. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set);\
  4684. break; /* (probably) not needed*/\
  4685. }\
  4686. }\
  4687. }\
  4688. while (0)
  4689. #endif //TMC2130
  4690. #ifndef MMU_FORCE_STEALTH_MODE
  4691. #define SETTINGS_MMU_MODE \
  4692. do\
  4693. {\
  4694. if (mmu_enabled)\
  4695. {\
  4696. if (SilentModeMenu_MMU == 0) MENU_ITEM_TOGGLE_P(_T(MSG_MMU_MODE), _T(MSG_NORMAL), lcd_silent_mode_mmu_set);\
  4697. else MENU_ITEM_TOGGLE_P(_T(MSG_MMU_MODE), _T(MSG_STEALTH), lcd_silent_mode_mmu_set);\
  4698. }\
  4699. }\
  4700. while (0)
  4701. #else //MMU_FORCE_STEALTH_MODE
  4702. #define SETTINGS_MMU_MODE
  4703. #endif //MMU_FORCE_STEALTH_MODE
  4704. #ifdef SDCARD_SORT_ALPHA
  4705. #define SETTINGS_SD \
  4706. do\
  4707. {\
  4708. if (card.ToshibaFlashAir_isEnabled())\
  4709. MENU_ITEM_TOGGLE_P(_T(MSG_SD_CARD), _T(MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY), lcd_toshiba_flash_air_compatibility_toggle);\
  4710. else\
  4711. MENU_ITEM_TOGGLE_P(_T(MSG_SD_CARD), _T(MSG_NORMAL), lcd_toshiba_flash_air_compatibility_toggle);\
  4712. \
  4713. uint8_t sdSort;\
  4714. EEPROM_read(EEPROM_SD_SORT, (uint8_t*)&sdSort, sizeof(sdSort));\
  4715. switch (sdSort)\
  4716. {\
  4717. case SD_SORT_TIME: MENU_ITEM_TOGGLE_P(_T(MSG_SORT), _T(MSG_SORT_TIME), lcd_sort_type_set); break;\
  4718. case SD_SORT_ALPHA: MENU_ITEM_TOGGLE_P(_T(MSG_SORT), _T(MSG_SORT_ALPHA), lcd_sort_type_set); break;\
  4719. default: MENU_ITEM_TOGGLE_P(_T(MSG_SORT), _T(MSG_NONE), lcd_sort_type_set);\
  4720. }\
  4721. }\
  4722. while (0)
  4723. #else // SDCARD_SORT_ALPHA
  4724. #define SETTINGS_SD \
  4725. do\
  4726. {\
  4727. if (card.ToshibaFlashAir_isEnabled())\
  4728. MENU_ITEM_TOGGLE_P(_T(MSG_SD_CARD), _T(MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY), lcd_toshiba_flash_air_compatibility_toggle);\
  4729. else\
  4730. MENU_ITEM_TOGGLE_P(_T(MSG_SD_CARD), _T(MSG_NORMAL), lcd_toshiba_flash_air_compatibility_toggle);\
  4731. }\
  4732. while (0)
  4733. #endif // SDCARD_SORT_ALPHA
  4734. /*
  4735. #define SETTINGS_MBL_MODE \
  4736. do\
  4737. {\
  4738. switch(e_mbl_type)\
  4739. {\
  4740. case e_MBL_FAST:\
  4741. MENU_ITEM_FUNCTION_P(_i("Mode [Fast]"),mbl_mode_set);\
  4742. break; \
  4743. case e_MBL_OPTIMAL:\
  4744. MENU_ITEM_FUNCTION_P(_i("Mode [Optimal]"), mbl_mode_set); \
  4745. break; \
  4746. case e_MBL_PREC:\
  4747. MENU_ITEM_FUNCTION_P(_i("Mode [Precise]"), mbl_mode_set); \
  4748. break; \
  4749. default:\
  4750. MENU_ITEM_FUNCTION_P(_i("Mode [Optimal]"), mbl_mode_set); \
  4751. break; \
  4752. }\
  4753. }\
  4754. while (0)
  4755. */
  4756. #define SETTINGS_SOUND \
  4757. do\
  4758. {\
  4759. switch(eSoundMode)\
  4760. {\
  4761. case e_SOUND_MODE_LOUD:\
  4762. MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SOUND_LOUD), lcd_sound_state_set);\
  4763. break;\
  4764. case e_SOUND_MODE_ONCE:\
  4765. MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SOUND_ONCE), lcd_sound_state_set);\
  4766. break;\
  4767. case e_SOUND_MODE_SILENT:\
  4768. MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SILENT), lcd_sound_state_set);\
  4769. break;\
  4770. case e_SOUND_MODE_BLIND:\
  4771. MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SOUND_BLIND), lcd_sound_state_set);\
  4772. break;\
  4773. default:\
  4774. MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SOUND_LOUD), lcd_sound_state_set);\
  4775. }\
  4776. }\
  4777. while (0)
  4778. //-//
  4779. static void lcd_check_mode_set(void)
  4780. {
  4781. switch(oCheckMode)
  4782. {
  4783. case ClCheckMode::_None:
  4784. oCheckMode=ClCheckMode::_Warn;
  4785. break;
  4786. case ClCheckMode::_Warn:
  4787. oCheckMode=ClCheckMode::_Strict;
  4788. break;
  4789. case ClCheckMode::_Strict:
  4790. oCheckMode=ClCheckMode::_None;
  4791. break;
  4792. default:
  4793. oCheckMode=ClCheckMode::_None;
  4794. }
  4795. eeprom_update_byte((uint8_t*)EEPROM_CHECK_MODE,(uint8_t)oCheckMode);
  4796. }
  4797. #define SETTINGS_MODE \
  4798. do\
  4799. {\
  4800. switch(oCheckMode)\
  4801. {\
  4802. case ClCheckMode::_None:\
  4803. MENU_ITEM_TOGGLE_P(_T(MSG_NOZZLE), _T(MSG_NONE), lcd_check_mode_set);\
  4804. break;\
  4805. case ClCheckMode::_Warn:\
  4806. MENU_ITEM_TOGGLE_P(_T(MSG_NOZZLE), _T(MSG_WARN), lcd_check_mode_set);\
  4807. break;\
  4808. case ClCheckMode::_Strict:\
  4809. MENU_ITEM_TOGGLE_P(_T(MSG_NOZZLE), _T(MSG_STRICT), lcd_check_mode_set);\
  4810. break;\
  4811. default:\
  4812. MENU_ITEM_TOGGLE_P(_T(MSG_NOZZLE), _T(MSG_NONE), lcd_check_mode_set);\
  4813. }\
  4814. }\
  4815. while (0)
  4816. static void lcd_nozzle_diameter_cycle(void) {
  4817. uint16_t nDiameter;
  4818. switch(oNozzleDiameter){
  4819. case ClNozzleDiameter::_Diameter_250:
  4820. oNozzleDiameter=ClNozzleDiameter::_Diameter_400;
  4821. nDiameter=400;
  4822. break;
  4823. case ClNozzleDiameter::_Diameter_400:
  4824. oNozzleDiameter=ClNozzleDiameter::_Diameter_600;
  4825. nDiameter=600;
  4826. break;
  4827. case ClNozzleDiameter::_Diameter_600:
  4828. oNozzleDiameter=ClNozzleDiameter::_Diameter_800;
  4829. nDiameter=800;
  4830. break;
  4831. case ClNozzleDiameter::_Diameter_800:
  4832. oNozzleDiameter=ClNozzleDiameter::_Diameter_250;
  4833. nDiameter=250;
  4834. break;
  4835. default:
  4836. oNozzleDiameter=ClNozzleDiameter::_Diameter_400;
  4837. nDiameter=400;
  4838. }
  4839. eeprom_update_byte((uint8_t*)EEPROM_NOZZLE_DIAMETER,(uint8_t)oNozzleDiameter);
  4840. eeprom_update_word((uint16_t*)EEPROM_NOZZLE_DIAMETER_uM,nDiameter);
  4841. }
  4842. #define SETTINGS_NOZZLE \
  4843. do\
  4844. {\
  4845. float fNozzleDiam;\
  4846. switch(oNozzleDiameter)\
  4847. {\
  4848. case ClNozzleDiameter::_Diameter_250: fNozzleDiam = 0.25f; break;\
  4849. case ClNozzleDiameter::_Diameter_400: fNozzleDiam = 0.4f; break;\
  4850. case ClNozzleDiameter::_Diameter_600: fNozzleDiam = 0.6f; break;\
  4851. case ClNozzleDiameter::_Diameter_800: fNozzleDiam = 0.8f; break;\
  4852. default: fNozzleDiam = 0.4f; break;\
  4853. }\
  4854. MENU_ITEM_TOGGLE(_T(MSG_NOZZLE_DIAMETER), ftostr12ns(fNozzleDiam), lcd_nozzle_diameter_cycle);\
  4855. }\
  4856. while (0)
  4857. static void lcd_check_model_set(void)
  4858. {
  4859. switch(oCheckModel)
  4860. {
  4861. case ClCheckModel::_None:
  4862. oCheckModel=ClCheckModel::_Warn;
  4863. break;
  4864. case ClCheckModel::_Warn:
  4865. oCheckModel=ClCheckModel::_Strict;
  4866. break;
  4867. case ClCheckModel::_Strict:
  4868. oCheckModel=ClCheckModel::_None;
  4869. break;
  4870. default:
  4871. oCheckModel=ClCheckModel::_None;
  4872. }
  4873. eeprom_update_byte((uint8_t*)EEPROM_CHECK_MODEL,(uint8_t)oCheckModel);
  4874. }
  4875. #define SETTINGS_MODEL \
  4876. do\
  4877. {\
  4878. switch(oCheckModel)\
  4879. {\
  4880. case ClCheckModel::_None:\
  4881. MENU_ITEM_TOGGLE_P(_T(MSG_MODEL), _T(MSG_NONE), lcd_check_model_set);\
  4882. break;\
  4883. case ClCheckModel::_Warn:\
  4884. MENU_ITEM_TOGGLE_P(_T(MSG_MODEL), _T(MSG_WARN), lcd_check_model_set);\
  4885. break;\
  4886. case ClCheckModel::_Strict:\
  4887. MENU_ITEM_TOGGLE_P(_T(MSG_MODEL), _T(MSG_STRICT), lcd_check_model_set);\
  4888. break;\
  4889. default:\
  4890. MENU_ITEM_TOGGLE_P(_T(MSG_MODEL), _T(MSG_NONE), lcd_check_model_set);\
  4891. }\
  4892. }\
  4893. while (0)
  4894. static void lcd_check_version_set(void)
  4895. {
  4896. switch(oCheckVersion)
  4897. {
  4898. case ClCheckVersion::_None:
  4899. oCheckVersion=ClCheckVersion::_Warn;
  4900. break;
  4901. case ClCheckVersion::_Warn:
  4902. oCheckVersion=ClCheckVersion::_Strict;
  4903. break;
  4904. case ClCheckVersion::_Strict:
  4905. oCheckVersion=ClCheckVersion::_None;
  4906. break;
  4907. default:
  4908. oCheckVersion=ClCheckVersion::_None;
  4909. }
  4910. eeprom_update_byte((uint8_t*)EEPROM_CHECK_VERSION,(uint8_t)oCheckVersion);
  4911. }
  4912. #define SETTINGS_VERSION \
  4913. do\
  4914. {\
  4915. switch(oCheckVersion)\
  4916. {\
  4917. case ClCheckVersion::_None:\
  4918. MENU_ITEM_TOGGLE_P(_T(MSG_FIRMWARE), _T(MSG_NONE), lcd_check_version_set);\
  4919. break;\
  4920. case ClCheckVersion::_Warn:\
  4921. MENU_ITEM_TOGGLE_P(_T(MSG_FIRMWARE), _T(MSG_WARN), lcd_check_version_set);\
  4922. break;\
  4923. case ClCheckVersion::_Strict:\
  4924. MENU_ITEM_TOGGLE_P(_T(MSG_FIRMWARE), _T(MSG_STRICT), lcd_check_version_set);\
  4925. break;\
  4926. default:\
  4927. MENU_ITEM_TOGGLE_P(_T(MSG_FIRMWARE), _T(MSG_NONE), lcd_check_version_set);\
  4928. }\
  4929. }\
  4930. while (0)
  4931. #if 0 // temporarily unused
  4932. static void lcd_check_gcode_set(void)
  4933. {
  4934. switch(oCheckGcode)
  4935. {
  4936. case ClCheckGcode::_None:
  4937. oCheckGcode=ClCheckGcode::_Warn;
  4938. break;
  4939. case ClCheckGcode::_Warn:
  4940. oCheckGcode=ClCheckGcode::_Strict;
  4941. break;
  4942. case ClCheckGcode::_Strict:
  4943. oCheckGcode=ClCheckGcode::_None;
  4944. break;
  4945. default:
  4946. oCheckGcode=ClCheckGcode::_None;
  4947. }
  4948. eeprom_update_byte((uint8_t*)EEPROM_CHECK_GCODE,(uint8_t)oCheckGcode);
  4949. }
  4950. #endif
  4951. #define SETTINGS_GCODE \
  4952. do\
  4953. {\
  4954. switch(oCheckGcode)\
  4955. {\
  4956. case ClCheckGcode::_None:\
  4957. MENU_ITEM_TOGGLE_P(_T(MSG_GCODE), _T(MSG_NONE), lcd_check_gcode_set);\
  4958. break;\
  4959. case ClCheckGcode::_Warn:\
  4960. MENU_ITEM_TOGGLE_P(_T(MSG_GCODE), _T(MSG_WARN), lcd_check_gcode_set);\
  4961. break;\
  4962. case ClCheckGcode::_Strict:\
  4963. MENU_ITEM_TOGGLE_P(_T(MSG_GCODE), _T(MSG_STRICT), lcd_check_gcode_set);\
  4964. break;\
  4965. default:\
  4966. MENU_ITEM_TOGGLE_P(_T(MSG_GCODE), _T(MSG_NONE), lcd_check_gcode_set);\
  4967. }\
  4968. }\
  4969. while (0)
  4970. static void lcd_checking_menu(void)
  4971. {
  4972. MENU_BEGIN();
  4973. MENU_ITEM_BACK_P(_T(MSG_HW_SETUP));
  4974. SETTINGS_MODE;
  4975. SETTINGS_MODEL;
  4976. SETTINGS_VERSION;
  4977. //-// temporarily disabled
  4978. //SETTINGS_GCODE;
  4979. MENU_END();
  4980. }
  4981. #ifdef IR_SENSOR_ANALOG
  4982. static void lcd_fsensor_actionNA_set(void)
  4983. {
  4984. switch(oFsensorActionNA)
  4985. {
  4986. case ClFsensorActionNA::_Continue:
  4987. oFsensorActionNA=ClFsensorActionNA::_Pause;
  4988. break;
  4989. case ClFsensorActionNA::_Pause:
  4990. oFsensorActionNA=ClFsensorActionNA::_Continue;
  4991. break;
  4992. default:
  4993. oFsensorActionNA=ClFsensorActionNA::_Continue;
  4994. }
  4995. eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_ACTION_NA,(uint8_t)oFsensorActionNA);
  4996. }
  4997. #define FSENSOR_ACTION_NA \
  4998. do\
  4999. {\
  5000. switch(oFsensorActionNA)\
  5001. {\
  5002. case ClFsensorActionNA::_Continue:\
  5003. MENU_ITEM_TOGGLE_P(_T(MSG_FS_ACTION), _T(MSG_FS_CONTINUE), lcd_fsensor_actionNA_set);\
  5004. break;\
  5005. case ClFsensorActionNA::_Pause:\
  5006. MENU_ITEM_TOGGLE_P(_T(MSG_FS_ACTION), _T(MSG_FS_PAUSE), lcd_fsensor_actionNA_set);\
  5007. break;\
  5008. default:\
  5009. oFsensorActionNA=ClFsensorActionNA::_Continue;\
  5010. }\
  5011. }\
  5012. while (0)
  5013. #endif //IR_SENSOR_ANALOG
  5014. template <uint8_t number>
  5015. static void select_sheet_menu()
  5016. {
  5017. selected_sheet = number;
  5018. lcd_sheet_menu();
  5019. }
  5020. static void sheets_menu()
  5021. {
  5022. MENU_BEGIN();
  5023. MENU_ITEM_BACK_P(_T(MSG_HW_SETUP));
  5024. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[0], select_sheet_menu<0>);
  5025. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[1], select_sheet_menu<1>);
  5026. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[2], select_sheet_menu<2>);
  5027. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[3], select_sheet_menu<3>);
  5028. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[4], select_sheet_menu<4>);
  5029. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[5], select_sheet_menu<5>);
  5030. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[6], select_sheet_menu<6>);
  5031. MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[7], select_sheet_menu<7>);
  5032. MENU_END();
  5033. }
  5034. void lcd_hw_setup_menu(void) // can not be "static"
  5035. {
  5036. typedef struct
  5037. {// 2bytes total
  5038. int8_t status;
  5039. uint8_t experimental_menu_visibility;
  5040. } _menu_data_t;
  5041. static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
  5042. _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
  5043. if (_md->status == 0 || lcd_draw_update)
  5044. {
  5045. _md->status = 1;
  5046. _md->experimental_menu_visibility = eeprom_read_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY);
  5047. if (_md->experimental_menu_visibility == EEPROM_EMPTY_VALUE)
  5048. {
  5049. _md->experimental_menu_visibility = 0;
  5050. eeprom_update_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY, _md->experimental_menu_visibility);
  5051. }
  5052. }
  5053. MENU_BEGIN();
  5054. MENU_ITEM_BACK_P(_T(bSettings?MSG_SETTINGS:MSG_BACK)); // i.e. default menu-item / menu-item after checking mismatch
  5055. MENU_ITEM_SUBMENU_P(_T(MSG_STEEL_SHEETS), sheets_menu);
  5056. SETTINGS_NOZZLE;
  5057. MENU_ITEM_SUBMENU_P(_i("Checks"), lcd_checking_menu); ////MSG_CHECKS c=18
  5058. #ifdef IR_SENSOR_ANALOG
  5059. FSENSOR_ACTION_NA;
  5060. //! Fsensor Detection isn't ready for mmu yet it is temporarily disabled.
  5061. //! @todo Don't forget to remove this as soon Fsensor Detection works with mmu
  5062. if(!mmu_enabled) MENU_ITEM_FUNCTION_P(PSTR("Fsensor Detection"), lcd_detect_IRsensor);
  5063. #endif //IR_SENSOR_ANALOG
  5064. if (_md->experimental_menu_visibility)
  5065. {
  5066. MENU_ITEM_SUBMENU_P(PSTR("Experimental"), lcd_experimental_menu);////MSG_MENU_EXPERIMENTAL c=18
  5067. }
  5068. #ifdef PINDA_TEMP_COMP
  5069. //! The SuperPINDA is detected when the PINDA temp is below its defined limit.
  5070. //! This works well on the EINSY board but not on the miniRAMBo board as
  5071. //! as a disconnected SuperPINDA will show higher temps compared to an EINSY board.
  5072. //!
  5073. //! This menu allows the user to en-/disable the SuperPINDA manualy
  5074. MENU_ITEM_TOGGLE_P(_N("SuperPINDA"), eeprom_read_byte((uint8_t *)EEPROM_PINDA_TEMP_COMPENSATION) ? _T(MSG_YES) : _T(MSG_NO), lcd_pinda_temp_compensation_toggle);
  5075. #endif //PINDA_TEMP_COMP
  5076. MENU_END();
  5077. }
  5078. static void lcd_settings_menu()
  5079. {
  5080. EEPROM_read(EEPROM_SILENT, (uint8_t*)&SilentModeMenu, sizeof(SilentModeMenu));
  5081. MENU_BEGIN();
  5082. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5083. MENU_ITEM_SUBMENU_P(_i("Temperature"), lcd_control_temperature_menu);////MSG_TEMPERATURE c=18
  5084. if (!PRINTER_ACTIVE || isPrintPaused)
  5085. {
  5086. MENU_ITEM_SUBMENU_P(_i("Move axis"), lcd_move_menu_1mm);////MSG_MOVE_AXIS c=18
  5087. MENU_ITEM_GCODE_P(_i("Disable steppers"), PSTR("M84"));////MSG_DISABLE_STEPPERS c=18
  5088. }
  5089. SETTINGS_FILAMENT_SENSOR;
  5090. SETTINGS_AUTO_DEPLETE;
  5091. SETTINGS_CUTTER;
  5092. MENU_ITEM_TOGGLE_P(_T(MSG_FANS_CHECK), fans_check_enabled ? _T(MSG_ON) : _T(MSG_OFF), lcd_set_fan_check);
  5093. SETTINGS_SILENT_MODE;
  5094. if(!farm_mode)
  5095. {
  5096. bSettings=true; // flag ('fake parameter') for 'lcd_hw_setup_menu()' function
  5097. MENU_ITEM_SUBMENU_P(_T(MSG_HW_SETUP), lcd_hw_setup_menu);
  5098. }
  5099. SETTINGS_MMU_MODE;
  5100. MENU_ITEM_SUBMENU_P(_T(MSG_MESH_BED_LEVELING), lcd_mesh_bed_leveling_settings);
  5101. #if defined (TMC2130) && defined (LINEARITY_CORRECTION)
  5102. MENU_ITEM_SUBMENU_P(_i("Lin. correction"), lcd_settings_linearity_correction_menu);////MSG_LIN_CORRECTION c=18
  5103. #endif //LINEARITY_CORRECTION && TMC2130
  5104. if(has_temperature_compensation())
  5105. {
  5106. MENU_ITEM_TOGGLE_P(_T(MSG_TEMP_CALIBRATION), eeprom_read_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE) ? _T(MSG_ON) : _T(MSG_OFF), lcd_temp_calibration_set);
  5107. }
  5108. #ifdef HAS_SECOND_SERIAL_PORT
  5109. MENU_ITEM_TOGGLE_P(_T(MSG_RPI_PORT), (selectedSerialPort == 0) ? _T(MSG_OFF) : _T(MSG_ON), lcd_second_serial_set);
  5110. #endif //HAS_SECOND_SERIAL
  5111. if (!isPrintPaused && !homing_flag && !mesh_bed_leveling_flag)
  5112. MENU_ITEM_SUBMENU_P(_T(MSG_BABYSTEP_Z), lcd_babystep_z);
  5113. #if (LANG_MODE != 0)
  5114. MENU_ITEM_SUBMENU_P(_i("Select language"), lcd_language_menu);////MSG_LANGUAGE_SELECT c=18
  5115. #endif //(LANG_MODE != 0)
  5116. SETTINGS_SD;
  5117. SETTINGS_SOUND;
  5118. #ifdef LCD_BL_PIN
  5119. if (backlightSupport)
  5120. {
  5121. MENU_ITEM_SUBMENU_P(_T(MSG_BRIGHTNESS), lcd_backlight_menu);
  5122. }
  5123. #endif //LCD_BL_PIN
  5124. if (farm_mode)
  5125. {
  5126. MENU_ITEM_FUNCTION_P(PSTR("Disable farm mode"), lcd_disable_farm_mode);
  5127. }
  5128. MENU_END();
  5129. }
  5130. #ifdef TMC2130
  5131. static void lcd_ustep_linearity_menu_save()
  5132. {
  5133. eeprom_update_byte((uint8_t*)EEPROM_TMC2130_WAVE_X_FAC, tmc2130_wave_fac[X_AXIS]);
  5134. eeprom_update_byte((uint8_t*)EEPROM_TMC2130_WAVE_Y_FAC, tmc2130_wave_fac[Y_AXIS]);
  5135. eeprom_update_byte((uint8_t*)EEPROM_TMC2130_WAVE_Z_FAC, tmc2130_wave_fac[Z_AXIS]);
  5136. eeprom_update_byte((uint8_t*)EEPROM_TMC2130_WAVE_E_FAC, tmc2130_wave_fac[E_AXIS]);
  5137. }
  5138. #endif //TMC2130
  5139. #ifdef TMC2130
  5140. static void lcd_settings_linearity_correction_menu_save()
  5141. {
  5142. bool changed = false;
  5143. if (tmc2130_wave_fac[X_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[X_AXIS] = 0;
  5144. if (tmc2130_wave_fac[Y_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[Y_AXIS] = 0;
  5145. if (tmc2130_wave_fac[Z_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[Z_AXIS] = 0;
  5146. if (tmc2130_wave_fac[E_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[E_AXIS] = 0;
  5147. changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_X_FAC) != tmc2130_wave_fac[X_AXIS]);
  5148. changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_Y_FAC) != tmc2130_wave_fac[Y_AXIS]);
  5149. changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_Z_FAC) != tmc2130_wave_fac[Z_AXIS]);
  5150. changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_E_FAC) != tmc2130_wave_fac[E_AXIS]);
  5151. lcd_ustep_linearity_menu_save();
  5152. if (changed) tmc2130_init(TMCInitParams(false, FarmOrUserECool()));
  5153. }
  5154. #endif //TMC2130
  5155. static void lcd_calibration_menu()
  5156. {
  5157. MENU_BEGIN();
  5158. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5159. if (!isPrintPaused)
  5160. {
  5161. MENU_ITEM_FUNCTION_P(_i("Wizard"), lcd_wizard);////MSG_WIZARD c=17
  5162. if (lcd_commands_type == LcdCommands::Idle)
  5163. {
  5164. MENU_ITEM_SUBMENU_P(_T(MSG_V2_CALIBRATION), lcd_first_layer_calibration_reset);////MSG_V2_CALIBRATION c=18
  5165. }
  5166. MENU_ITEM_GCODE_P(_T(MSG_AUTO_HOME), PSTR("G28 W"));
  5167. #ifdef TMC2130
  5168. MENU_ITEM_FUNCTION_P(_i("Belt test"), lcd_belttest_v);////MSG_BELTTEST c=18
  5169. #endif //TMC2130
  5170. MENU_ITEM_FUNCTION_P(_i("Selftest"), lcd_selftest_v);////MSG_SELFTEST c=18
  5171. #ifdef MK1BP
  5172. // MK1
  5173. // "Calibrate Z"
  5174. MENU_ITEM_GCODE_P(_T(MSG_HOMEYZ), PSTR("G28 Z"));
  5175. #else //MK1BP
  5176. // MK2
  5177. MENU_ITEM_FUNCTION_P(_i("Calibrate XYZ"), lcd_mesh_calibration);////MSG_CALIBRATE_BED c=18
  5178. // "Calibrate Z" with storing the reference values to EEPROM.
  5179. MENU_ITEM_SUBMENU_P(_T(MSG_HOMEYZ), lcd_mesh_calibration_z);
  5180. #ifndef SNMM
  5181. //MENU_ITEM_FUNCTION_P(_i("Calibrate E"), lcd_calibrate_extruder);////MSG_CALIBRATE_E c=20
  5182. #endif
  5183. // "Mesh Bed Leveling"
  5184. MENU_ITEM_SUBMENU_P(_T(MSG_MESH_BED_LEVELING), lcd_mesh_bedleveling);
  5185. #endif //MK1BP
  5186. MENU_ITEM_SUBMENU_P(_i("Bed level correct"), lcd_adjust_bed);////MSG_BED_CORRECTION_MENU c=18
  5187. MENU_ITEM_SUBMENU_P(_i("PID calibration"), pid_extruder);////MSG_PID_EXTRUDER c=17
  5188. #ifndef TMC2130
  5189. MENU_ITEM_SUBMENU_P(_i("Show end stops"), menu_show_end_stops);////MSG_SHOW_END_STOPS c=18
  5190. #endif
  5191. #ifndef MK1BP
  5192. MENU_ITEM_GCODE_P(_i("Reset XYZ calibr."), PSTR("M44"));////MSG_CALIBRATE_BED_RESET c=18
  5193. #endif //MK1BP
  5194. #ifndef SNMM
  5195. //MENU_ITEM_FUNCTION_P(MSG_RESET_CALIBRATE_E, lcd_extr_cal_reset);
  5196. #endif
  5197. #ifndef MK1BP
  5198. if(has_temperature_compensation())
  5199. {
  5200. MENU_ITEM_SUBMENU_P(_i("Temp. calibration"), lcd_pinda_calibration_menu);////MSG_CALIBRATION_PINDA_MENU c=17
  5201. }
  5202. #endif //MK1BP
  5203. }
  5204. MENU_END();
  5205. }
  5206. void bowden_menu() {
  5207. int enc_dif = lcd_encoder_diff;
  5208. int cursor_pos = 0;
  5209. lcd_clear();
  5210. lcd_putc_at(0, 0, '>');
  5211. for (uint_least8_t i = 0; i < 4; i++) {
  5212. lcd_puts_at_P(1, i, PSTR("Extruder "));
  5213. lcd_print(i);
  5214. lcd_print(": ");
  5215. EEPROM_read_B(EEPROM_BOWDEN_LENGTH + i * 2, &bowden_length[i]);
  5216. lcd_print(bowden_length[i] - 48);
  5217. }
  5218. enc_dif = lcd_encoder_diff;
  5219. lcd_consume_click();
  5220. while (1) {
  5221. manage_heater();
  5222. manage_inactivity(true);
  5223. if (abs((enc_dif - lcd_encoder_diff)) > 2) {
  5224. if (enc_dif > lcd_encoder_diff) {
  5225. cursor_pos--;
  5226. }
  5227. if (enc_dif < lcd_encoder_diff) {
  5228. cursor_pos++;
  5229. }
  5230. if (cursor_pos > 3) {
  5231. cursor_pos = 3;
  5232. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5233. }
  5234. if (cursor_pos < 0) {
  5235. cursor_pos = 0;
  5236. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5237. }
  5238. lcd_puts_at_P(0, 0, PSTR(" \n \n \n "));
  5239. lcd_putc_at(0, cursor_pos, '>');
  5240. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  5241. enc_dif = lcd_encoder_diff;
  5242. _delay(100);
  5243. }
  5244. if (lcd_clicked()) {
  5245. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5246. lcd_clear();
  5247. while (1) {
  5248. manage_heater();
  5249. manage_inactivity(true);
  5250. lcd_puts_at_P(1, 1, PSTR("Extruder "));
  5251. lcd_print(cursor_pos);
  5252. lcd_print(": ");
  5253. lcd_set_cursor(13, 1);
  5254. lcd_print(bowden_length[cursor_pos] - 48);
  5255. if (abs((enc_dif - lcd_encoder_diff)) > 2) {
  5256. if (enc_dif > lcd_encoder_diff) {
  5257. bowden_length[cursor_pos]--;
  5258. lcd_set_cursor(13, 1);
  5259. lcd_print(bowden_length[cursor_pos] - 48);
  5260. enc_dif = lcd_encoder_diff;
  5261. }
  5262. if (enc_dif < lcd_encoder_diff) {
  5263. bowden_length[cursor_pos]++;
  5264. lcd_set_cursor(13, 1);
  5265. lcd_print(bowden_length[cursor_pos] - 48);
  5266. enc_dif = lcd_encoder_diff;
  5267. }
  5268. }
  5269. _delay(100);
  5270. if (lcd_clicked()) {
  5271. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5272. EEPROM_save_B(EEPROM_BOWDEN_LENGTH + cursor_pos * 2, &bowden_length[cursor_pos]);
  5273. if (lcd_show_fullscreen_message_yes_no_and_wait_P(PSTR("Continue with another bowden?"))) {
  5274. lcd_update_enable(true);
  5275. lcd_clear();
  5276. enc_dif = lcd_encoder_diff;
  5277. lcd_putc_at(0, cursor_pos, '>');
  5278. for (uint_least8_t i = 0; i < 4; i++) {
  5279. lcd_puts_at_P(1, i, PSTR("Extruder "));
  5280. lcd_print(i);
  5281. lcd_print(": ");
  5282. EEPROM_read_B(EEPROM_BOWDEN_LENGTH + i * 2, &bowden_length[i]);
  5283. lcd_print(bowden_length[i] - 48);
  5284. }
  5285. break;
  5286. }
  5287. else return;
  5288. }
  5289. }
  5290. }
  5291. }
  5292. }
  5293. #ifdef SNMM
  5294. static char snmm_stop_print_menu() { //menu for choosing which filaments will be unloaded in stop print
  5295. lcd_clear();
  5296. lcd_puts_at_P(0,0,_T(MSG_UNLOAD_FILAMENT)); lcd_print(':');
  5297. lcd_set_cursor(0, 1); lcd_print('>');
  5298. lcd_puts_at_P(1,2,_i("Used during print"));////MSG_USED c=19
  5299. lcd_puts_at_P(1,3,_i("Current"));////MSG_CURRENT c=19
  5300. char cursor_pos = 1;
  5301. int enc_dif = 0;
  5302. KEEPALIVE_STATE(PAUSED_FOR_USER);
  5303. lcd_consume_click();
  5304. while (1) {
  5305. manage_heater();
  5306. manage_inactivity(true);
  5307. if (abs((enc_dif - lcd_encoder_diff)) > 4) {
  5308. if ((abs(enc_dif - lcd_encoder_diff)) > 1) {
  5309. if (enc_dif > lcd_encoder_diff) cursor_pos--;
  5310. if (enc_dif < lcd_encoder_diff) cursor_pos++;
  5311. if (cursor_pos > 3) {
  5312. cursor_pos = 3;
  5313. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5314. }
  5315. if (cursor_pos < 1){
  5316. cursor_pos = 1;
  5317. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5318. }
  5319. lcd_puts_at_P(0, 1, PSTR(" \n \n "));
  5320. lcd_set_cursor(0, cursor_pos);
  5321. lcd_print('>');
  5322. enc_dif = lcd_encoder_diff;
  5323. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  5324. _delay(100);
  5325. }
  5326. }
  5327. if (lcd_clicked()) {
  5328. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5329. KEEPALIVE_STATE(IN_HANDLER);
  5330. return(cursor_pos - 1);
  5331. }
  5332. }
  5333. }
  5334. #endif //SNMM
  5335. //! @brief Select one of numbered items
  5336. //!
  5337. //! Create list of items with header. Header can not be selected.
  5338. //! Each item has text description passed by function parameter and
  5339. //! number. There are 5 numbered items, if mmu_enabled, 4 otherwise.
  5340. //! Items are numbered from 1 to 4 or 5. But index returned starts at 0.
  5341. //! There can be last item with different text and no number.
  5342. //!
  5343. //! @param header Header text
  5344. //! @param item Item text
  5345. //! @param last_item Last item text, or nullptr if there is no Last item
  5346. //! @return selected item index, first item index is 0
  5347. uint8_t choose_menu_P(const char *header, const char *item, const char *last_item)
  5348. {
  5349. //following code should handle 3 to 127 number of items well
  5350. const int8_t items_no = last_item?(mmu_enabled?6:5):(mmu_enabled?5:4);
  5351. const uint8_t item_len = item?strlen_P(item):0;
  5352. int8_t first = 0;
  5353. int8_t enc_dif = lcd_encoder_diff;
  5354. int8_t cursor_pos = 1;
  5355. lcd_clear();
  5356. KEEPALIVE_STATE(PAUSED_FOR_USER);
  5357. while (1)
  5358. {
  5359. manage_heater();
  5360. manage_inactivity(true);
  5361. if (abs((enc_dif - lcd_encoder_diff)) > 4)
  5362. {
  5363. if (enc_dif > lcd_encoder_diff)
  5364. {
  5365. cursor_pos--;
  5366. }
  5367. if (enc_dif < lcd_encoder_diff)
  5368. {
  5369. cursor_pos++;
  5370. }
  5371. enc_dif = lcd_encoder_diff;
  5372. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  5373. }
  5374. if (cursor_pos > 3)
  5375. {
  5376. cursor_pos = 3;
  5377. if (first < items_no - 3)
  5378. {
  5379. first++;
  5380. lcd_clear();
  5381. } else { // here we are at the very end of the list
  5382. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5383. }
  5384. }
  5385. if (cursor_pos < 1)
  5386. {
  5387. cursor_pos = 1;
  5388. if (first > 0)
  5389. {
  5390. first--;
  5391. lcd_clear();
  5392. } else { // here we are at the very end of the list
  5393. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5394. }
  5395. }
  5396. if (header) lcd_puts_at_P(0,0,header);
  5397. const bool last_visible = (first == items_no - 3);
  5398. const uint_least8_t ordinary_items = (last_item&&last_visible)?2:3;
  5399. for (uint_least8_t i = 0; i < ordinary_items; i++)
  5400. {
  5401. if (item) lcd_puts_at_P(1, i + 1, item);
  5402. }
  5403. for (uint_least8_t i = 0; i < ordinary_items; i++)
  5404. {
  5405. lcd_set_cursor(2 + item_len, i+1);
  5406. lcd_print(first + i + 1);
  5407. }
  5408. if (last_item&&last_visible) lcd_puts_at_P(1, 3, last_item);
  5409. lcd_puts_at_P(0, 1, PSTR(" \n \n "));
  5410. lcd_putc_at(0, cursor_pos, '>');
  5411. _delay(100);
  5412. if (lcd_clicked())
  5413. {
  5414. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5415. KEEPALIVE_STATE(IN_HANDLER);
  5416. lcd_encoder_diff = 0;
  5417. return(cursor_pos + first - 1);
  5418. }
  5419. }
  5420. }
  5421. char reset_menu() {
  5422. const uint8_t items_no =
  5423. #ifdef SNMM
  5424. 6;
  5425. #else
  5426. 5;
  5427. #endif
  5428. static int8_t first = 0;
  5429. int8_t enc_dif = 0;
  5430. char cursor_pos = 0;
  5431. const char *const item[items_no] = {PSTR("Language"), PSTR("Statistics"), PSTR("Shipping prep"), PSTR("Service prep"), PSTR("All Data")
  5432. #ifdef SNMM
  5433. , PSTR("Bowden length")
  5434. #endif
  5435. };
  5436. enc_dif = lcd_encoder_diff;
  5437. lcd_clear();
  5438. lcd_set_cursor(0, 0);
  5439. lcd_putc('>');
  5440. lcd_consume_click();
  5441. while (1) {
  5442. for (uint_least8_t i = 0; i < 4; i++) {
  5443. lcd_puts_at_P(1, i, item[first + i]);
  5444. }
  5445. manage_heater();
  5446. manage_inactivity(true);
  5447. if (abs((enc_dif - lcd_encoder_diff)) > 4) {
  5448. if ((abs(enc_dif - lcd_encoder_diff)) > 1) {
  5449. if (enc_dif > lcd_encoder_diff) {
  5450. cursor_pos--;
  5451. }
  5452. if (enc_dif < lcd_encoder_diff) {
  5453. cursor_pos++;
  5454. }
  5455. if (cursor_pos > 3) {
  5456. cursor_pos = 3;
  5457. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5458. if (first < items_no - 4) {
  5459. first++;
  5460. lcd_clear();
  5461. }
  5462. }
  5463. if (cursor_pos < 0) {
  5464. cursor_pos = 0;
  5465. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5466. if (first > 0) {
  5467. first--;
  5468. lcd_clear();
  5469. }
  5470. }
  5471. lcd_puts_at_P(0, 0, PSTR(" \n \n \n "));
  5472. lcd_set_cursor(0, cursor_pos);
  5473. lcd_putc('>');
  5474. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  5475. enc_dif = lcd_encoder_diff;
  5476. _delay(100);
  5477. }
  5478. }
  5479. if (lcd_clicked()) {
  5480. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5481. return(cursor_pos + first);
  5482. }
  5483. }
  5484. }
  5485. static void lcd_disable_farm_mode()
  5486. {
  5487. int8_t disable = lcd_show_fullscreen_message_yes_no_and_wait_P(PSTR("Disable farm mode?"), true, false); //allow timeouting, default no
  5488. if (disable)
  5489. {
  5490. enquecommand_P(PSTR("G99"));
  5491. lcd_return_to_status();
  5492. }
  5493. lcd_update_enable(true);
  5494. lcd_draw_update = 2;
  5495. }
  5496. static void fil_load_menu()
  5497. {
  5498. MENU_BEGIN();
  5499. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5500. MENU_ITEM_FUNCTION_P(_i("Load all"), load_all); ////MSG_LOAD_ALL c=17
  5501. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '1', extr_adj, 0); ////MSG_LOAD_FILAMENT_1 c=16
  5502. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '2', extr_adj, 1); ////MSG_LOAD_FILAMENT_2 c=17
  5503. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '3', extr_adj, 2); ////MSG_LOAD_FILAMENT_3 c=17
  5504. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '4', extr_adj, 3); ////MSG_LOAD_FILAMENT_4 c=17
  5505. if (mmu_enabled)
  5506. {
  5507. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '5', extr_adj, 4);
  5508. }
  5509. MENU_END();
  5510. }
  5511. static void mmu_load_to_nozzle_menu()
  5512. {
  5513. if (bFilamentAction)
  5514. {
  5515. MENU_BEGIN();
  5516. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5517. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '1', lcd_mmu_load_to_nozzle, 0);
  5518. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '2', lcd_mmu_load_to_nozzle, 1);
  5519. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '3', lcd_mmu_load_to_nozzle, 2);
  5520. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '4', lcd_mmu_load_to_nozzle, 3);
  5521. MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '5', lcd_mmu_load_to_nozzle, 4);
  5522. MENU_END();
  5523. }
  5524. else
  5525. {
  5526. eFilamentAction = FilamentAction::MmuLoad;
  5527. preheat_or_continue();
  5528. }
  5529. }
  5530. static void mmu_eject_filament(uint8_t filament)
  5531. {
  5532. menu_back();
  5533. mmu_eject_filament(filament, true);
  5534. }
  5535. static void mmu_fil_eject_menu()
  5536. {
  5537. if (bFilamentAction)
  5538. {
  5539. MENU_BEGIN();
  5540. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5541. MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '1', mmu_eject_filament, 0);
  5542. MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '2', mmu_eject_filament, 1);
  5543. MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '3', mmu_eject_filament, 2);
  5544. MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '4', mmu_eject_filament, 3);
  5545. MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '5', mmu_eject_filament, 4);
  5546. MENU_END();
  5547. }
  5548. else
  5549. {
  5550. eFilamentAction = FilamentAction::MmuEject;
  5551. preheat_or_continue();
  5552. }
  5553. }
  5554. #ifdef MMU_HAS_CUTTER
  5555. static void mmu_cut_filament_menu()
  5556. {
  5557. if(bFilamentAction)
  5558. {
  5559. MENU_BEGIN();
  5560. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5561. MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '1', mmu_cut_filament, 0);
  5562. MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '2', mmu_cut_filament, 1);
  5563. MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '3', mmu_cut_filament, 2);
  5564. MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '4', mmu_cut_filament, 3);
  5565. MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '5', mmu_cut_filament, 4);
  5566. MENU_END();
  5567. }
  5568. else
  5569. {
  5570. eFilamentAction=FilamentAction::MmuCut;
  5571. bFilamentFirstRun=false;
  5572. if(target_temperature[0]>=EXTRUDE_MINTEMP)
  5573. {
  5574. bFilamentPreheatState=true;
  5575. mFilamentItem(target_temperature[0],target_temperature_bed);
  5576. }
  5577. else lcd_generic_preheat_menu();
  5578. }
  5579. }
  5580. #endif //MMU_HAS_CUTTER
  5581. #ifdef SNMM
  5582. static void fil_unload_menu()
  5583. {
  5584. MENU_BEGIN();
  5585. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5586. MENU_ITEM_FUNCTION_P(_i("Unload all"), extr_unload_all);////MSG_UNLOAD_ALL c=17
  5587. MENU_ITEM_FUNCTION_P(_i("Unload filament 1"), extr_unload_0);////MSG_UNLOAD_FILAMENT_1 c=17
  5588. MENU_ITEM_FUNCTION_P(_i("Unload filament 2"), extr_unload_1);////MSG_UNLOAD_FILAMENT_2 c=17
  5589. MENU_ITEM_FUNCTION_P(_i("Unload filament 3"), extr_unload_2);////MSG_UNLOAD_FILAMENT_3 c=17
  5590. MENU_ITEM_FUNCTION_P(_i("Unload filament 4"), extr_unload_3);////MSG_UNLOAD_FILAMENT_4 c=17
  5591. if (mmu_enabled)
  5592. MENU_ITEM_FUNCTION_P(_i("Unload filament 5"), extr_unload_4);////MSG_UNLOAD_FILAMENT_5 c=17
  5593. MENU_END();
  5594. }
  5595. static void change_extr_menu(){
  5596. MENU_BEGIN();
  5597. MENU_ITEM_BACK_P(_T(MSG_MAIN));
  5598. MENU_ITEM_FUNCTION_P(_i("Extruder 1"), extr_change_0);////MSG_EXTRUDER_1 c=17
  5599. MENU_ITEM_FUNCTION_P(_i("Extruder 2"), extr_change_1);////MSG_EXTRUDER_2 c=17
  5600. MENU_ITEM_FUNCTION_P(_i("Extruder 3"), extr_change_2);////MSG_EXTRUDER_3 c=17
  5601. MENU_ITEM_FUNCTION_P(_i("Extruder 4"), extr_change_3);////MSG_EXTRUDER_4 c=17
  5602. MENU_END();
  5603. }
  5604. #endif //SNMM
  5605. // unload filament for single material printer (used in M702 gcode)
  5606. // @param automatic: If true, unload_filament is part of a unload+load sequence (M600)
  5607. void unload_filament(bool automatic)
  5608. {
  5609. custom_message_type = CustomMsg::FilamentLoading;
  5610. lcd_setstatuspgm(_T(MSG_UNLOADING_FILAMENT));
  5611. raise_z_above(automatic? MIN_Z_FOR_SWAP: MIN_Z_FOR_UNLOAD);
  5612. // extr_unload2();
  5613. current_position[E_AXIS] -= 45;
  5614. plan_buffer_line_curposXYZE(5200 / 60);
  5615. st_synchronize();
  5616. current_position[E_AXIS] -= 15;
  5617. plan_buffer_line_curposXYZE(1000 / 60);
  5618. st_synchronize();
  5619. current_position[E_AXIS] -= 20;
  5620. plan_buffer_line_curposXYZE(1000 / 60);
  5621. st_synchronize();
  5622. lcd_display_message_fullscreen_P(_T(MSG_PULL_OUT_FILAMENT));
  5623. //disable extruder steppers so filament can be removed
  5624. disable_e0();
  5625. disable_e1();
  5626. disable_e2();
  5627. _delay(100);
  5628. Sound_MakeSound(e_SOUND_TYPE_StandardPrompt);
  5629. uint8_t counterBeep = 0;
  5630. while (!lcd_clicked() && (counterBeep < 50)) {
  5631. delay_keep_alive(100);
  5632. counterBeep++;
  5633. }
  5634. st_synchronize();
  5635. while (lcd_clicked()) delay_keep_alive(100);
  5636. lcd_update_enable(true);
  5637. lcd_setstatuspgm(_T(WELCOME_MSG));
  5638. custom_message_type = CustomMsg::Status;
  5639. }
  5640. unsigned char lcd_choose_color() {
  5641. //function returns index of currently chosen item
  5642. //following part can be modified from 2 to 255 items:
  5643. //-----------------------------------------------------
  5644. unsigned char items_no = 2;
  5645. const char *item[items_no];
  5646. item[0] = "Orange";
  5647. item[1] = "Black";
  5648. //-----------------------------------------------------
  5649. uint_least8_t active_rows;
  5650. static int first = 0;
  5651. int enc_dif = 0;
  5652. unsigned char cursor_pos = 1;
  5653. enc_dif = lcd_encoder_diff;
  5654. lcd_clear();
  5655. lcd_putc_at(0, 1, '>');
  5656. active_rows = items_no < 3 ? items_no : 3;
  5657. lcd_consume_click();
  5658. while (1) {
  5659. lcd_puts_at_P(0, 0, PSTR("Choose color:"));
  5660. for (uint_least8_t i = 0; i < active_rows; i++) {
  5661. lcd_set_cursor(1, i+1);
  5662. lcd_print(item[first + i]);
  5663. }
  5664. manage_heater();
  5665. manage_inactivity(true);
  5666. proc_commands();
  5667. if (abs((enc_dif - lcd_encoder_diff)) > 12) {
  5668. if (enc_dif > lcd_encoder_diff) {
  5669. cursor_pos--;
  5670. }
  5671. if (enc_dif < lcd_encoder_diff) {
  5672. cursor_pos++;
  5673. }
  5674. if (cursor_pos > active_rows) {
  5675. cursor_pos = active_rows;
  5676. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5677. if (first < items_no - active_rows) {
  5678. first++;
  5679. lcd_clear();
  5680. }
  5681. }
  5682. if (cursor_pos < 1) {
  5683. cursor_pos = 1;
  5684. Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
  5685. if (first > 0) {
  5686. first--;
  5687. lcd_clear();
  5688. }
  5689. }
  5690. lcd_putc_at(0, 1, ' ');
  5691. lcd_putc_at(0, 2, ' ');
  5692. lcd_putc_at(0, 3, ' ');
  5693. lcd_putc_at(0, cursor_pos, '>');
  5694. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  5695. enc_dif = lcd_encoder_diff;
  5696. _delay(100);
  5697. }
  5698. if (lcd_clicked()) {
  5699. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  5700. switch(cursor_pos + first - 1) {
  5701. case 0: return 1; break;
  5702. case 1: return 0; break;
  5703. default: return 99; break;
  5704. }
  5705. }
  5706. }
  5707. }
  5708. #include "xflash.h"
  5709. #ifdef LCD_TEST
  5710. static void lcd_test_menu()
  5711. {
  5712. XFLASH_SPI_ENTER();
  5713. xflash_enable_wr();
  5714. xflash_chip_erase();
  5715. xflash_disable_wr();
  5716. }
  5717. #endif //LCD_TEST
  5718. static bool fan_error_selftest()
  5719. {
  5720. #ifdef FANCHECK
  5721. if (!fans_check_enabled) return 0;
  5722. fanSpeed = 255;
  5723. #ifdef FAN_SOFT_PWM
  5724. fanSpeedSoftPwm = 255;
  5725. #endif //FAN_SOFT_PWM
  5726. manage_heater(); //enables print fan
  5727. setExtruderAutoFanState(3); //force enables the extruder fan
  5728. #ifdef FAN_SOFT_PWM
  5729. extruder_autofan_last_check = _millis();
  5730. fan_measuring = true;
  5731. #endif //FAN_SOFT_PWM
  5732. _delay(1000); //delay_keep_alive would turn off extruder fan, because temerature is too low (maybe)
  5733. manage_heater();
  5734. fanSpeed = 0;
  5735. setExtruderAutoFanState(1); //releases lock on the extruder fan
  5736. #ifdef FAN_SOFT_PWM
  5737. fanSpeedSoftPwm = 0;
  5738. #endif //FAN_SOFT_PWM
  5739. manage_heater();
  5740. #ifdef TACH_0
  5741. if (fan_speed[0] <= 20) { //extruder fan error
  5742. LCD_ALERTMESSAGERPGM(MSG_FANCHECK_EXTRUDER);
  5743. return 1;
  5744. }
  5745. #endif
  5746. #ifdef TACH_1
  5747. if (fan_speed[1] <= 20) { //print fan error
  5748. LCD_ALERTMESSAGERPGM(MSG_FANCHECK_PRINT);
  5749. return 1;
  5750. }
  5751. #endif
  5752. #endif //FANCHECK
  5753. return 0;
  5754. }
  5755. //! @brief Resume paused print, send host action "resumed"
  5756. //! @todo It is not good to call restore_print_from_ram_and_continue() from function called by lcd_update(),
  5757. //! as restore_print_from_ram_and_continue() calls lcd_update() internally.
  5758. void lcd_resume_print()
  5759. {
  5760. lcd_return_to_status();
  5761. lcd_reset_alert_level(); //for fan speed error
  5762. if (fan_error_selftest()) {
  5763. if (is_usb_printing) SERIAL_PROTOCOLLNRPGM(MSG_OCTOPRINT_PAUSED);
  5764. return; //abort if error persists
  5765. }
  5766. cmdqueue_serial_disabled = false;
  5767. lcd_setstatuspgm(_T(MSG_FINISHING_MOVEMENTS));
  5768. st_synchronize();
  5769. custom_message_type = CustomMsg::Resuming;
  5770. isPrintPaused = false;
  5771. restore_print_from_ram_and_continue(default_retraction);
  5772. pause_time += (_millis() - start_pause_print); //accumulate time when print is paused for correct statistics calculation
  5773. refresh_cmd_timeout();
  5774. SERIAL_PROTOCOLLNRPGM(MSG_OCTOPRINT_RESUMED); //resume octoprint
  5775. custom_message_type = CustomMsg::Status;
  5776. }
  5777. //! @brief Resume paused USB/host print, send host action "resume"
  5778. void lcd_resume_usb_print()
  5779. {
  5780. SERIAL_PROTOCOLLNRPGM(MSG_OCTOPRINT_RESUME); //resume octoprint
  5781. }
  5782. static void change_sheet()
  5783. {
  5784. eeprom_update_byte(&(EEPROM_Sheets_base->active_sheet), selected_sheet);
  5785. menu_back(3);
  5786. }
  5787. static void lcd_rename_sheet_menu()
  5788. {
  5789. struct MenuData
  5790. {
  5791. bool initialized;
  5792. uint8_t selected;
  5793. char name[sizeof(Sheet::name)];
  5794. };
  5795. static_assert(sizeof(menu_data)>= sizeof(MenuData),"MenuData doesn't fit into menu_data");
  5796. MenuData* menuData = (MenuData*)&(menu_data[0]);
  5797. if (!menuData->initialized)
  5798. {
  5799. eeprom_read_block(menuData->name, EEPROM_Sheets_base->s[selected_sheet].name, sizeof(Sheet::name));
  5800. lcd_encoder = menuData->name[0];
  5801. menuData->initialized = true;
  5802. }
  5803. if (lcd_encoder < '\x20') lcd_encoder = '\x20';
  5804. if (lcd_encoder > '\x7F') lcd_encoder = '\x7F';
  5805. menuData->name[menuData->selected] = lcd_encoder;
  5806. lcd_set_cursor(0,0);
  5807. for (uint_least8_t i = 0; i < sizeof(Sheet::name); ++i)
  5808. {
  5809. lcd_putc(menuData->name[i]);
  5810. }
  5811. lcd_set_cursor(menuData->selected, 1);
  5812. lcd_putc('^');
  5813. if (lcd_clicked())
  5814. {
  5815. if ((menuData->selected + 1u) < sizeof(Sheet::name))
  5816. {
  5817. lcd_encoder = menuData->name[++(menuData->selected)];
  5818. }
  5819. else
  5820. {
  5821. eeprom_update_block(menuData->name,
  5822. EEPROM_Sheets_base->s[selected_sheet].name,
  5823. sizeof(Sheet::name));
  5824. menu_back();
  5825. }
  5826. }
  5827. }
  5828. static void lcd_reset_sheet()
  5829. {
  5830. SheetName sheetName;
  5831. eeprom_default_sheet_name(selected_sheet, sheetName);
  5832. eeprom_update_word(reinterpret_cast<uint16_t *>(&(EEPROM_Sheets_base->s[selected_sheet].z_offset)),EEPROM_EMPTY_VALUE16);
  5833. eeprom_update_block(sheetName.c,EEPROM_Sheets_base->s[selected_sheet].name,sizeof(Sheet::name));
  5834. if (selected_sheet == eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))
  5835. {
  5836. eeprom_switch_to_next_sheet();
  5837. if((-1 == eeprom_next_initialized_sheet(0)) && (CALIBRATION_STATUS_CALIBRATED == calibration_status()))
  5838. {
  5839. calibration_status_store(CALIBRATION_STATUS_LIVE_ADJUST);
  5840. }
  5841. }
  5842. menu_back();
  5843. }
  5844. //! @brief Activate selected_sheet and run first layer calibration
  5845. static void activate_calibrate_sheet()
  5846. {
  5847. eeprom_update_byte(&(EEPROM_Sheets_base->active_sheet), selected_sheet);
  5848. lcd_first_layer_calibration_reset();
  5849. }
  5850. static void lcd_sheet_menu()
  5851. {
  5852. MENU_BEGIN();
  5853. MENU_ITEM_BACK_P(_T(MSG_STEEL_SHEETS));
  5854. if(eeprom_is_sheet_initialized(selected_sheet)){
  5855. MENU_ITEM_SUBMENU_P(_i("Select"), change_sheet); ////MSG_SELECT c=18
  5856. }
  5857. if (lcd_commands_type == LcdCommands::Idle)
  5858. {
  5859. MENU_ITEM_SUBMENU_P(_T(MSG_V2_CALIBRATION), activate_calibrate_sheet);////MSG_V2_CALIBRATION c=18
  5860. }
  5861. MENU_ITEM_SUBMENU_P(_i("Rename"), lcd_rename_sheet_menu); ////MSG_RENAME c=18
  5862. MENU_ITEM_FUNCTION_P(_T(MSG_RESET), lcd_reset_sheet); ////MSG_RESET c=14
  5863. MENU_END();
  5864. }
  5865. //! @brief Show Main Menu
  5866. //!
  5867. //! @code{.unparsed}
  5868. //! |01234567890123456789|
  5869. //! | Info screen | allways
  5870. //!
  5871. //! | tst - Save | ifdef RESUME_DEBUG
  5872. //! | tst - Restore | ifdef RESUME_DEBUG
  5873. //!
  5874. //! | recover print | ifdef TMC2130_DEBUG
  5875. //! | power panic | ifdef TMC2130_DEBUG
  5876. //!
  5877. //! | Live adjust Z | printing + Z low
  5878. //!
  5879. //! | Change filament | farm mode
  5880. //!
  5881. //! | Tune | printing + paused
  5882. //! | Pause print | printing + not paused
  5883. //! | Resume print | printing + paused
  5884. //! | Stop print | printing or paused + NOT MBL
  5885. //! | Preheat | not printing + not paused
  5886. //! | Print from SD | not printing or paused
  5887. //!
  5888. //! | Switch sheet | farm mode
  5889. //!
  5890. //! | AutoLoad filament | not printing + not mmu or paused
  5891. //! | Load filament | not printing + mmu or paused
  5892. //! | Load to nozzle | not printing + mmu or paused
  5893. //! | Unload filament | not printing or paused
  5894. //! | Eject filament | not printing + mmu or paused
  5895. //! | Cut filament | not printing + mmu or paused + cut atctive
  5896. //! | Settings | not printing or paused
  5897. //! | Calibration | not printing
  5898. //! | Statistics | not printing
  5899. //! | Fail stats | allways
  5900. //! | Fail stats MMU | mmu
  5901. //! | Support | allways
  5902. //! @endcode
  5903. static void lcd_main_menu()
  5904. {
  5905. MENU_BEGIN();
  5906. // Majkl superawesome menu
  5907. MENU_ITEM_BACK_P(_T(MSG_WATCH));
  5908. #ifdef RESUME_DEBUG
  5909. if (!saved_printing)
  5910. MENU_ITEM_FUNCTION_P(PSTR("tst - Save"), lcd_menu_test_save);
  5911. else
  5912. MENU_ITEM_FUNCTION_P(PSTR("tst - Restore"), lcd_menu_test_restore);
  5913. #endif //RESUME_DEBUG
  5914. #ifdef TMC2130_DEBUG
  5915. MENU_ITEM_FUNCTION_P(PSTR("recover print"), recover_print);
  5916. MENU_ITEM_FUNCTION_P(PSTR("power panic"), uvlo_);
  5917. #endif //TMC2130_DEBUG
  5918. if ( ( IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LcdCommands::Layer1Cal)) && (current_position[Z_AXIS] < Z_HEIGHT_HIDE_LIVE_ADJUST_MENU) && !homing_flag && !mesh_bed_leveling_flag) {
  5919. MENU_ITEM_SUBMENU_P(_T(MSG_BABYSTEP_Z), lcd_babystep_z);//8
  5920. }
  5921. if (farm_mode)
  5922. MENU_ITEM_FUNCTION_P(_T(MSG_FILAMENTCHANGE), lcd_colorprint_change);//8
  5923. if ( moves_planned() || PRINTER_ACTIVE ) {
  5924. MENU_ITEM_SUBMENU_P(_i("Tune"), lcd_tune_menu);////MSG_TUNE c=18
  5925. } else {
  5926. MENU_ITEM_SUBMENU_P(_i("Preheat"), lcd_preheat_menu);////MSG_PREHEAT c=18
  5927. }
  5928. if (mesh_bed_leveling_flag == false && homing_flag == false && !isPrintPaused) {
  5929. if (is_usb_printing) {
  5930. MENU_ITEM_FUNCTION_P(_T(MSG_PAUSE_PRINT), lcd_pause_usb_print);////MSG_PAUSE_PRINT c=18
  5931. } else if (IS_SD_PRINTING) {
  5932. MENU_ITEM_FUNCTION_P(_T(MSG_PAUSE_PRINT), lcd_pause_print);////MSG_PAUSE_PRINT c=18
  5933. }
  5934. }
  5935. if(isPrintPaused)
  5936. {
  5937. #ifdef FANCHECK
  5938. if((fan_check_error == EFCE_FIXED) || (fan_check_error == EFCE_OK))
  5939. #endif //FANCHECK
  5940. {
  5941. if (is_usb_printing) {
  5942. MENU_ITEM_SUBMENU_P(_T(MSG_RESUME_PRINT), lcd_resume_usb_print);////MSG_RESUME_PRINT c=18
  5943. } else {
  5944. MENU_ITEM_SUBMENU_P(_T(MSG_RESUME_PRINT), lcd_resume_print);////MSG_RESUME_PRINT c=18
  5945. }
  5946. }
  5947. }
  5948. if((IS_SD_PRINTING || is_usb_printing || isPrintPaused) && (custom_message_type != CustomMsg::MeshBedLeveling)) {
  5949. MENU_ITEM_SUBMENU_P(_T(MSG_STOP_PRINT), lcd_sdcard_stop);
  5950. }
  5951. #ifdef SDSUPPORT //!@todo SDSUPPORT undefined creates several issues in source code
  5952. if (card.cardOK || lcd_commands_type == LcdCommands::Layer1Cal) {
  5953. if (!card.isFileOpen()) {
  5954. if (!is_usb_printing && (lcd_commands_type != LcdCommands::Layer1Cal)) {
  5955. //if (farm_mode) MENU_ITEM_SUBMENU_P(MSG_FARM_CARD_MENU, lcd_farm_sdcard_menu);
  5956. /*else*/{
  5957. bMain=true; // flag ('fake parameter') for 'lcd_sdcard_menu()' function
  5958. MENU_ITEM_SUBMENU_P(_T(MSG_CARD_MENU), lcd_sdcard_menu);
  5959. }
  5960. }
  5961. #if SDCARDDETECT < 1
  5962. MENU_ITEM_GCODE_P(_i("Change SD card"), PSTR("M21")); // SD-card changed by user////MSG_CNG_SDCARD
  5963. #endif //SDCARDDETECT
  5964. }
  5965. } else {
  5966. bMain=true; // flag (i.e. 'fake parameter') for 'lcd_sdcard_menu()' function
  5967. MENU_ITEM_SUBMENU_P(_i("No SD card"), lcd_sdcard_menu);////MSG_NO_CARD c=18
  5968. #if SDCARDDETECT < 1
  5969. MENU_ITEM_GCODE_P(_i("Init. SD card"), PSTR("M21")); // Manually initialize the SD-card via user interface////MSG_INIT_SDCARD
  5970. #endif //SDCARDDETECT
  5971. }
  5972. #endif //SDSUPPORT
  5973. if(!isPrintPaused && !IS_SD_PRINTING && !is_usb_printing && (lcd_commands_type != LcdCommands::Layer1Cal)) {
  5974. if (!farm_mode) {
  5975. const int8_t sheet = eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet));
  5976. const int8_t nextSheet = eeprom_next_initialized_sheet(sheet);
  5977. if ((nextSheet >= 0) && (sheet != nextSheet)) { // show menu only if we have 2 or more sheets initialized
  5978. MENU_ITEM_FUNCTION_E(EEPROM_Sheets_base->s[sheet], eeprom_switch_to_next_sheet);
  5979. }
  5980. }
  5981. }
  5982. if ( ! ( IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LcdCommands::Layer1Cal) ) ) {
  5983. if (mmu_enabled) {
  5984. MENU_ITEM_SUBMENU_P(_T(MSG_LOAD_FILAMENT), fil_load_menu);
  5985. MENU_ITEM_SUBMENU_P(_i("Load to nozzle"), mmu_load_to_nozzle_menu);////MSG_LOAD_TO_NOZZLE c=18
  5986. //-// MENU_ITEM_FUNCTION_P(_T(MSG_UNLOAD_FILAMENT), extr_unload);
  5987. //bFilamentFirstRun=true;
  5988. MENU_ITEM_SUBMENU_P(_T(MSG_UNLOAD_FILAMENT), mmu_unload_filament);
  5989. MENU_ITEM_SUBMENU_P(_T(MSG_EJECT_FILAMENT), mmu_fil_eject_menu);
  5990. #ifdef MMU_HAS_CUTTER
  5991. MENU_ITEM_SUBMENU_P(_T(MSG_CUT_FILAMENT), mmu_cut_filament_menu);
  5992. #endif //MMU_HAS_CUTTER
  5993. } else {
  5994. #ifdef SNMM
  5995. MENU_ITEM_SUBMENU_P(_T(MSG_UNLOAD_FILAMENT), fil_unload_menu);
  5996. MENU_ITEM_SUBMENU_P(_i("Change extruder"), change_extr_menu);////MSG_CHANGE_EXTR c=20
  5997. #endif
  5998. #ifdef FILAMENT_SENSOR
  5999. if ((fsensor_autoload_enabled == true) && (fsensor_enabled == true) && (mmu_enabled == false))
  6000. MENU_ITEM_SUBMENU_P(_i("AutoLoad filament"), lcd_menu_AutoLoadFilament);////MSG_AUTOLOAD_FILAMENT c=18
  6001. else
  6002. #endif //FILAMENT_SENSOR
  6003. {
  6004. bFilamentFirstRun=true;
  6005. MENU_ITEM_SUBMENU_P(_T(MSG_LOAD_FILAMENT), lcd_LoadFilament);
  6006. }
  6007. bFilamentFirstRun=true;
  6008. MENU_ITEM_SUBMENU_P(_T(MSG_UNLOAD_FILAMENT), lcd_unLoadFilament);
  6009. }
  6010. MENU_ITEM_SUBMENU_P(_T(MSG_SETTINGS), lcd_settings_menu);
  6011. if(!isPrintPaused) MENU_ITEM_SUBMENU_P(_T(MSG_MENU_CALIBRATION), lcd_calibration_menu);
  6012. }
  6013. if (!is_usb_printing && (lcd_commands_type != LcdCommands::Layer1Cal)) {
  6014. MENU_ITEM_SUBMENU_P(_i("Statistics"), lcd_menu_statistics);////MSG_STATISTICS c=18
  6015. }
  6016. #if defined(TMC2130) || defined(FILAMENT_SENSOR)
  6017. MENU_ITEM_SUBMENU_P(_i("Fail stats"), lcd_menu_fails_stats);////MSG_FAIL_STATS c=18
  6018. #endif
  6019. if (mmu_enabled) {
  6020. MENU_ITEM_SUBMENU_P(_i("Fail stats MMU"), lcd_menu_fails_stats_mmu);////MSG_MMU_FAIL_STATS c=18
  6021. }
  6022. MENU_ITEM_SUBMENU_P(_i("Support"), lcd_support_menu);////MSG_SUPPORT c=18
  6023. #ifdef LCD_TEST
  6024. MENU_ITEM_SUBMENU_P(_i("XFLASH init"), lcd_test_menu);////MSG_SUPPORT
  6025. #endif //LCD_TEST
  6026. MENU_END();
  6027. }
  6028. #ifdef DEBUG_STEPPER_TIMER_MISSED
  6029. bool stepper_timer_overflow_state = false;
  6030. uint16_t stepper_timer_overflow_max = 0;
  6031. uint16_t stepper_timer_overflow_last = 0;
  6032. uint16_t stepper_timer_overflow_cnt = 0;
  6033. void stepper_timer_overflow() {
  6034. char msg[28];
  6035. sprintf_P(msg, PSTR("#%d %d max %d"), ++ stepper_timer_overflow_cnt, stepper_timer_overflow_last >> 1, stepper_timer_overflow_max >> 1);
  6036. lcd_setstatus(msg);
  6037. stepper_timer_overflow_state = false;
  6038. if (stepper_timer_overflow_last > stepper_timer_overflow_max)
  6039. stepper_timer_overflow_max = stepper_timer_overflow_last;
  6040. SERIAL_ECHOPGM("Stepper timer overflow: ");
  6041. MYSERIAL.print(msg);
  6042. SERIAL_ECHOLNPGM("");
  6043. WRITE(BEEPER, LOW);
  6044. }
  6045. #endif /* DEBUG_STEPPER_TIMER_MISSED */
  6046. static void lcd_colorprint_change() {
  6047. enquecommand_P(PSTR("M600"));
  6048. custom_message_type = CustomMsg::FilamentLoading; //just print status message
  6049. lcd_setstatuspgm(_T(MSG_FINISHING_MOVEMENTS));
  6050. lcd_return_to_status();
  6051. lcd_draw_update = 3;
  6052. }
  6053. #ifdef LA_LIVE_K
  6054. // @wavexx: looks like there's no generic float editing function in menu.cpp so we
  6055. // redefine our custom handling functions to mimick other tunables
  6056. const char menu_fmt_float13off[] PROGMEM = "%c%-13.13S%6.6S";
  6057. static void lcd_advance_draw_K(char chr, float val)
  6058. {
  6059. if (val <= 0)
  6060. lcd_printf_P(menu_fmt_float13off, chr, MSG_ADVANCE_K, _T(MSG_OFF));
  6061. else
  6062. lcd_printf_P(menu_fmt_float13, chr, MSG_ADVANCE_K, val);
  6063. }
  6064. static void lcd_advance_edit_K(void)
  6065. {
  6066. if (lcd_draw_update)
  6067. {
  6068. if (lcd_encoder < 0) lcd_encoder = 0;
  6069. if (lcd_encoder > 999) lcd_encoder = 999;
  6070. lcd_set_cursor(0, 1);
  6071. lcd_advance_draw_K(' ', 0.01 * lcd_encoder);
  6072. }
  6073. if (LCD_CLICKED)
  6074. {
  6075. extruder_advance_K = 0.01 * lcd_encoder;
  6076. menu_back_no_reset();
  6077. }
  6078. }
  6079. static uint8_t lcd_advance_K()
  6080. {
  6081. if (menu_item == menu_line)
  6082. {
  6083. if (lcd_draw_update)
  6084. {
  6085. lcd_set_cursor(0, menu_row);
  6086. lcd_advance_draw_K((lcd_encoder == menu_item)?'>':' ', extruder_advance_K);
  6087. }
  6088. if (menu_clicked && (lcd_encoder == menu_item))
  6089. {
  6090. menu_submenu_no_reset(lcd_advance_edit_K);
  6091. lcd_encoder = 100. * extruder_advance_K;
  6092. return menu_item_ret();
  6093. }
  6094. }
  6095. menu_item++;
  6096. return 0;
  6097. }
  6098. #define MENU_ITEM_EDIT_advance_K() do { if (lcd_advance_K()) return; } while (0)
  6099. #endif
  6100. static void lcd_tune_menu()
  6101. {
  6102. typedef struct
  6103. {
  6104. menu_data_edit_t reserved; //!< reserved for number editing functions
  6105. int8_t status; //!< To recognize, whether the menu has been just initialized.
  6106. //! Backup of extrudemultiply, to recognize, that the value has been changed and
  6107. //! it needs to be applied.
  6108. int16_t extrudemultiply;
  6109. } _menu_data_t;
  6110. static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
  6111. _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
  6112. if (_md->status == 0)
  6113. {
  6114. // Menu was entered. Mark the menu as entered and save the current extrudemultiply value.
  6115. _md->status = 1;
  6116. _md->extrudemultiply = extrudemultiply;
  6117. }
  6118. else if (_md->extrudemultiply != extrudemultiply)
  6119. {
  6120. // extrudemultiply has been changed from the child menu. Apply the new value.
  6121. _md->extrudemultiply = extrudemultiply;
  6122. calculate_extruder_multipliers();
  6123. }
  6124. EEPROM_read(EEPROM_SILENT, (uint8_t*)&SilentModeMenu, sizeof(SilentModeMenu));
  6125. MENU_BEGIN();
  6126. MENU_ITEM_BACK_P(_T(MSG_MAIN)); //1
  6127. MENU_ITEM_EDIT_int3_P(_i("Speed"), &feedmultiply, 10, 999);//2////MSG_SPEED c=15
  6128. MENU_ITEM_EDIT_int3_P(_T(MSG_NOZZLE), &target_temperature[0], 0, HEATER_0_MAXTEMP - 10);//3
  6129. MENU_ITEM_EDIT_int3_P(_T(MSG_BED), &target_temperature_bed, 0, BED_MAXTEMP - 10);//4
  6130. MENU_ITEM_EDIT_int3_P(_T(MSG_FAN_SPEED), &fanSpeed, 0, 255);//5
  6131. MENU_ITEM_EDIT_int3_P(_i("Flow"), &extrudemultiply, 10, 999);//6////MSG_FLOW c=15
  6132. #ifdef LA_LIVE_K
  6133. MENU_ITEM_EDIT_advance_K();//7
  6134. #endif
  6135. #ifdef FILAMENTCHANGEENABLE
  6136. if (!farm_mode)
  6137. MENU_ITEM_FUNCTION_P(_T(MSG_FILAMENTCHANGE), lcd_colorprint_change);//8
  6138. #endif
  6139. #ifdef FILAMENT_SENSOR
  6140. if (FSensorStateMenu == 0) {
  6141. if (fsensor_not_responding && (mmu_enabled == false)) {
  6142. /* Filament sensor not working*/
  6143. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_NA), lcd_fsensor_state_set);
  6144. }
  6145. else {
  6146. /* Filament sensor turned off, working, no problems*/
  6147. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_OFF), lcd_fsensor_state_set);
  6148. }
  6149. }
  6150. else {
  6151. MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_ON), lcd_fsensor_state_set);
  6152. }
  6153. #ifdef IR_SENSOR_ANALOG
  6154. FSENSOR_ACTION_NA;
  6155. #endif //IR_SENSOR_ANALOG
  6156. #endif //FILAMENT_SENSOR
  6157. SETTINGS_AUTO_DEPLETE;
  6158. SETTINGS_CUTTER;
  6159. MENU_ITEM_TOGGLE_P(_T(MSG_FANS_CHECK), fans_check_enabled ? _T(MSG_ON) : _T(MSG_OFF), lcd_set_fan_check);
  6160. #ifdef TMC2130
  6161. if(!farm_mode)
  6162. {
  6163. if (SilentModeMenu == SILENT_MODE_NORMAL) MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_NORMAL), lcd_silent_mode_set);
  6164. else MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_STEALTH), lcd_silent_mode_set);
  6165. if (SilentModeMenu == SILENT_MODE_NORMAL)
  6166. {
  6167. if (lcd_crash_detect_enabled()) MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_ON), crash_mode_switch);
  6168. else MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_OFF), crash_mode_switch);
  6169. }
  6170. else MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), NULL, lcd_crash_mode_info);
  6171. }
  6172. #else //TMC2130
  6173. if (!farm_mode) { //dont show in menu if we are in farm mode
  6174. switch (SilentModeMenu) {
  6175. case SILENT_MODE_POWER: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set); break;
  6176. case SILENT_MODE_SILENT: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_SILENT), lcd_silent_mode_set); break;
  6177. case SILENT_MODE_AUTO: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_AUTO_POWER), lcd_silent_mode_set); break;
  6178. default: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set); break; // (probably) not needed
  6179. }
  6180. }
  6181. #endif //TMC2130
  6182. SETTINGS_MMU_MODE;
  6183. SETTINGS_SOUND;
  6184. #ifdef LCD_BL_PIN
  6185. if (backlightSupport)
  6186. {
  6187. MENU_ITEM_SUBMENU_P(_T(MSG_BRIGHTNESS), lcd_backlight_menu);
  6188. }
  6189. #endif //LCD_BL_PIN
  6190. MENU_END();
  6191. }
  6192. static void mbl_magnets_elimination_toggle() {
  6193. bool magnet_elimination = (eeprom_read_byte((uint8_t*)EEPROM_MBL_MAGNET_ELIMINATION) > 0);
  6194. magnet_elimination = !magnet_elimination;
  6195. eeprom_update_byte((uint8_t*)EEPROM_MBL_MAGNET_ELIMINATION, (uint8_t)magnet_elimination);
  6196. }
  6197. static void mbl_mesh_toggle() {
  6198. uint8_t mesh_nr = eeprom_read_byte((uint8_t*)EEPROM_MBL_POINTS_NR);
  6199. if(mesh_nr == 3) mesh_nr = 7;
  6200. else mesh_nr = 3;
  6201. eeprom_update_byte((uint8_t*)EEPROM_MBL_POINTS_NR, mesh_nr);
  6202. }
  6203. static void mbl_probe_nr_toggle() {
  6204. mbl_z_probe_nr = eeprom_read_byte((uint8_t*)EEPROM_MBL_PROBE_NR);
  6205. switch (mbl_z_probe_nr) {
  6206. case 1: mbl_z_probe_nr = 3; break;
  6207. case 3: mbl_z_probe_nr = 5; break;
  6208. case 5: mbl_z_probe_nr = 1; break;
  6209. default: mbl_z_probe_nr = 3; break;
  6210. }
  6211. eeprom_update_byte((uint8_t*)EEPROM_MBL_PROBE_NR, mbl_z_probe_nr);
  6212. }
  6213. static void lcd_mesh_bed_leveling_settings()
  6214. {
  6215. bool magnet_elimination = (eeprom_read_byte((uint8_t*)EEPROM_MBL_MAGNET_ELIMINATION) > 0);
  6216. uint8_t points_nr = eeprom_read_byte((uint8_t*)EEPROM_MBL_POINTS_NR);
  6217. char sToggle[4]; //enough for nxn format
  6218. MENU_BEGIN();
  6219. MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
  6220. sToggle[0] = points_nr + '0';
  6221. sToggle[1] = 'x';
  6222. sToggle[2] = points_nr + '0';
  6223. sToggle[3] = 0;
  6224. MENU_ITEM_TOGGLE(_T(MSG_MESH), sToggle, mbl_mesh_toggle);
  6225. sToggle[0] = mbl_z_probe_nr + '0';
  6226. sToggle[1] = 0;
  6227. MENU_ITEM_TOGGLE(_T(MSG_Z_PROBE_NR), sToggle, mbl_probe_nr_toggle);
  6228. MENU_ITEM_TOGGLE_P(_T(MSG_MAGNETS_COMP), (points_nr == 7) ? (magnet_elimination ? _T(MSG_ON): _T(MSG_OFF)) : _T(MSG_NA), mbl_magnets_elimination_toggle);
  6229. MENU_END();
  6230. //SETTINGS_MBL_MODE;
  6231. }
  6232. #ifdef LCD_BL_PIN
  6233. static void backlight_mode_toggle()
  6234. {
  6235. switch (backlightMode)
  6236. {
  6237. case BACKLIGHT_MODE_BRIGHT: backlightMode = BACKLIGHT_MODE_DIM; break;
  6238. case BACKLIGHT_MODE_DIM: backlightMode = BACKLIGHT_MODE_AUTO; break;
  6239. case BACKLIGHT_MODE_AUTO: backlightMode = BACKLIGHT_MODE_BRIGHT; break;
  6240. default: backlightMode = BACKLIGHT_MODE_BRIGHT; break;
  6241. }
  6242. backlight_save();
  6243. }
  6244. static void lcd_backlight_menu()
  6245. {
  6246. MENU_BEGIN();
  6247. ON_MENU_LEAVE(
  6248. backlight_save();
  6249. );
  6250. MENU_ITEM_BACK_P(_T(MSG_BACK));
  6251. MENU_ITEM_EDIT_int3_P(_T(MSG_BL_HIGH), &backlightLevel_HIGH, backlightLevel_LOW, 255);
  6252. MENU_ITEM_EDIT_int3_P(_T(MSG_BL_LOW), &backlightLevel_LOW, 0, backlightLevel_HIGH);
  6253. MENU_ITEM_TOGGLE_P(_T(MSG_MODE), ((backlightMode==BACKLIGHT_MODE_BRIGHT) ? _T(MSG_BRIGHT) : ((backlightMode==BACKLIGHT_MODE_DIM) ? _T(MSG_DIM) : _T(MSG_AUTO))), backlight_mode_toggle);
  6254. MENU_ITEM_EDIT_int3_P(_T(MSG_TIMEOUT), &backlightTimer_period, 1, 999);
  6255. MENU_END();
  6256. }
  6257. #endif //LCD_BL_PIN
  6258. static void lcd_control_temperature_menu()
  6259. {
  6260. #ifdef PIDTEMP
  6261. // set up temp variables - undo the default scaling
  6262. // raw_Ki = unscalePID_i(Ki);
  6263. // raw_Kd = unscalePID_d(Kd);
  6264. #endif
  6265. MENU_BEGIN();
  6266. MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
  6267. #if TEMP_SENSOR_0 != 0
  6268. MENU_ITEM_EDIT_int3_P(_T(MSG_NOZZLE), &target_temperature[0], 0, HEATER_0_MAXTEMP - 10);
  6269. #endif
  6270. #if TEMP_SENSOR_1 != 0
  6271. MENU_ITEM_EDIT_int3_P(_i("Nozzle2"), &target_temperature[1], 0, HEATER_1_MAXTEMP - 10);////MSG_NOZZLE1
  6272. #endif
  6273. #if TEMP_SENSOR_2 != 0
  6274. MENU_ITEM_EDIT_int3_P(_i("Nozzle3"), &target_temperature[2], 0, HEATER_2_MAXTEMP - 10);////MSG_NOZZLE2
  6275. #endif
  6276. #if TEMP_SENSOR_BED != 0
  6277. MENU_ITEM_EDIT_int3_P(_T(MSG_BED), &target_temperature_bed, 0, BED_MAXTEMP - 3);
  6278. #endif
  6279. MENU_ITEM_EDIT_int3_P(_T(MSG_FAN_SPEED), &fanSpeed, 0, 255);
  6280. #if defined AUTOTEMP && (TEMP_SENSOR_0 != 0)
  6281. //MENU_ITEM_EDIT removed, following code must be redesigned if AUTOTEMP enabled
  6282. MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled);
  6283. MENU_ITEM_EDIT(float3, _i(" \002 Min"), &autotemp_min, 0, HEATER_0_MAXTEMP - 10);////MSG_MIN
  6284. MENU_ITEM_EDIT(float3, _i(" \002 Max"), &autotemp_max, 0, HEATER_0_MAXTEMP - 10);////MSG_MAX
  6285. MENU_ITEM_EDIT(float32, _i(" \002 Fact"), &autotemp_factor, 0.0, 1.0);////MSG_FACTOR
  6286. #endif
  6287. MENU_END();
  6288. }
  6289. static void lcd_sd_refresh()
  6290. {
  6291. #if SDCARDDETECT == -1
  6292. card.initsd();
  6293. #else
  6294. card.presort();
  6295. #endif
  6296. menu_top = 0;
  6297. lcd_encoder = 0;
  6298. menu_data_reset(); //Forces reloading of cached variables.
  6299. }
  6300. static void lcd_sd_updir()
  6301. {
  6302. card.updir();
  6303. menu_top = 0;
  6304. lcd_encoder = 0;
  6305. menu_data_reset(); //Forces reloading of cached variables.
  6306. }
  6307. void lcd_print_stop()
  6308. {
  6309. if (!IsStopped()) {
  6310. // Stop the print if we didn't already due to an error
  6311. if (!card.sdprinting) {
  6312. SERIAL_ECHOLNRPGM(MSG_OCTOPRINT_CANCEL); // for Octoprint
  6313. }
  6314. UnconditionalStop();
  6315. }
  6316. // TODO: all the following should be moved in the main marlin loop!
  6317. #ifdef MESH_BED_LEVELING
  6318. mbl.active = false; //also prevents undoing the mbl compensation a second time in the second planner_abort_hard()
  6319. #endif
  6320. lcd_setstatuspgm(_T(MSG_PRINT_ABORTED));
  6321. stoptime = _millis();
  6322. unsigned long t = (stoptime - starttime - pause_time) / 1000; //time in s
  6323. pause_time = 0;
  6324. save_statistics(total_filament_used, t);
  6325. lcd_commands_step = 0;
  6326. lcd_commands_type = LcdCommands::Idle;
  6327. lcd_cooldown(); //turns off heaters and fan; goes to status screen.
  6328. current_position[Z_AXIS] += 10; //lift Z.
  6329. plan_buffer_line_curposXYZE(manual_feedrate[Z_AXIS] / 60);
  6330. if (axis_known_position[X_AXIS] && axis_known_position[Y_AXIS]) //if axis are homed, move to parked position.
  6331. {
  6332. current_position[X_AXIS] = X_CANCEL_POS;
  6333. current_position[Y_AXIS] = Y_CANCEL_POS;
  6334. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6335. }
  6336. st_synchronize();
  6337. if (mmu_enabled) extr_unload(); //M702 C
  6338. finishAndDisableSteppers(); //M84
  6339. lcd_setstatuspgm(_T(WELCOME_MSG));
  6340. custom_message_type = CustomMsg::Status;
  6341. planner_abort_hard(); //needs to be done since plan_buffer_line resets waiting_inside_plan_buffer_line_print_aborted to false. Also copies current to destination.
  6342. axis_relative_modes = E_AXIS_MASK; //XYZ absolute, E relative
  6343. isPrintPaused = false; //clear isPrintPaused flag to allow starting next print after pause->stop scenario.
  6344. }
  6345. void lcd_sdcard_stop()
  6346. {
  6347. lcd_puts_at_P(0, 0, _T(MSG_STOP_PRINT));
  6348. lcd_puts_at_P(2, 2, _T(MSG_NO));
  6349. lcd_puts_at_P(2, 3, _T(MSG_YES));
  6350. lcd_putc_at(0, 2, ' ');
  6351. lcd_putc_at(0, 3, ' ');
  6352. if ((int32_t)lcd_encoder > 2) { lcd_encoder = 2; }
  6353. if ((int32_t)lcd_encoder < 1) { lcd_encoder = 1; }
  6354. lcd_putc_at(0, 1 + lcd_encoder, '>');
  6355. if (lcd_clicked())
  6356. {
  6357. Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
  6358. if ((int32_t)lcd_encoder == 1)
  6359. {
  6360. lcd_return_to_status();
  6361. }
  6362. if ((int32_t)lcd_encoder == 2)
  6363. {
  6364. lcd_print_stop();
  6365. }
  6366. }
  6367. }
  6368. void lcd_sdcard_menu()
  6369. {
  6370. enum menuState_t : uint8_t {_uninitialized, _standard, _scrolling};
  6371. typedef struct
  6372. {
  6373. menuState_t menuState = _uninitialized;
  6374. uint8_t offset;
  6375. bool isDir;
  6376. const char* scrollPointer;
  6377. uint16_t selectedFileID;
  6378. uint16_t fileCnt;
  6379. int8_t row;
  6380. uint8_t sdSort;
  6381. ShortTimer lcd_scrollTimer;
  6382. } _menu_data_sdcard_t;
  6383. static_assert(sizeof(menu_data)>= sizeof(_menu_data_sdcard_t),"_menu_data_sdcard_t doesn't fit into menu_data");
  6384. _menu_data_sdcard_t* _md = (_menu_data_sdcard_t*)&(menu_data[0]);
  6385. switch(_md->menuState)
  6386. {
  6387. case _uninitialized: //Initialize menu data
  6388. {
  6389. if (card.presort_flag == true) //used to force resorting if sorting type is changed.
  6390. {
  6391. card.presort_flag = false;
  6392. card.presort();
  6393. }
  6394. _md->fileCnt = card.getnrfilenames();
  6395. _md->sdSort = eeprom_read_byte((uint8_t*)EEPROM_SD_SORT);
  6396. _md->menuState = _standard;
  6397. }
  6398. // FALLTHRU
  6399. case _standard: //normal menu structure.
  6400. {
  6401. if (!_md->lcd_scrollTimer.running()) //if the timer is not running, then the menu state was just switched, so redraw the screen.
  6402. {
  6403. _md->lcd_scrollTimer.start();
  6404. lcd_draw_update = 1;
  6405. }
  6406. if (_md->lcd_scrollTimer.expired(500) && (_md->row != -1)) //switch to the scrolling state on timeout if a file/dir is selected.
  6407. {
  6408. _md->menuState = _scrolling;
  6409. _md->offset = 0;
  6410. _md->scrollPointer = NULL;
  6411. _md->lcd_scrollTimer.start();
  6412. lcd_draw_update = 1; //forces last load before switching to scrolling.
  6413. }
  6414. if (lcd_draw_update == 0 && !LCD_CLICKED)
  6415. return; // nothing to do (so don't thrash the SD card)
  6416. _md->row = -1; // assume that no SD file/dir is currently selected. Once they are rendered, it will be changed to the correct row for the _scrolling state.
  6417. //if we reached this point it means that the encoder moved or clicked or the state is being switched. Reset the scrollTimer.
  6418. _md->lcd_scrollTimer.start();
  6419. MENU_BEGIN();
  6420. MENU_ITEM_BACK_P(_T(bMain?MSG_MAIN:MSG_BACK)); // i.e. default menu-item / menu-item after card insertion
  6421. card.getWorkDirName();
  6422. if (card.filename[0] == '/')
  6423. {
  6424. #if SDCARDDETECT == -1
  6425. MENU_ITEM_FUNCTION_P(_T(MSG_REFRESH), lcd_sd_refresh);
  6426. #else
  6427. if (card.ToshibaFlashAir_isEnabled())
  6428. MENU_ITEM_FUNCTION_P(_T(MSG_REFRESH), lcd_sd_refresh); //show the refresh option if in flashAir mode.
  6429. #endif
  6430. }
  6431. else
  6432. MENU_ITEM_FUNCTION_P(PSTR(LCD_STR_FOLDER ".."), lcd_sd_updir); //Show the updir button if in a subdir.
  6433. for (uint16_t i = _md->fileCnt; i-- > 0;) // Every file, from top to bottom.
  6434. {
  6435. if (menu_item == menu_line) //If the file is on the screen.
  6436. {
  6437. //load filename to memory.
  6438. #ifdef SDCARD_SORT_ALPHA
  6439. if (_md->sdSort == SD_SORT_NONE)
  6440. card.getfilename(i);
  6441. else
  6442. card.getfilename_sorted(i, _md->sdSort);
  6443. #else
  6444. card.getfilename(i);
  6445. #endif
  6446. if (lcd_encoder == menu_item) //If the file is selected.
  6447. {
  6448. _md->selectedFileID = i;
  6449. _md->isDir = card.filenameIsDir;
  6450. _md->row = menu_row;
  6451. }
  6452. if (card.filenameIsDir)
  6453. MENU_ITEM_SDDIR(card.filename, card.longFilename);
  6454. else
  6455. MENU_ITEM_SDFILE(card.filename, card.longFilename);
  6456. }
  6457. else MENU_ITEM_DUMMY(); //dummy item that just increments the internal menu counters.
  6458. }
  6459. MENU_END();
  6460. } break;
  6461. case _scrolling: //scrolling filename
  6462. {
  6463. const bool rewindFlag = LCD_CLICKED || lcd_draw_update; //flag that says whether the menu should return to _standard state.
  6464. if (_md->scrollPointer == NULL)
  6465. {
  6466. //load filename to memory.
  6467. #ifdef SDCARD_SORT_ALPHA
  6468. if (_md->sdSort == SD_SORT_NONE)
  6469. card.getfilename(_md->selectedFileID);
  6470. else
  6471. card.getfilename_sorted(_md->selectedFileID, _md->sdSort);
  6472. #else
  6473. card.getfilename(_md->selectedFileID);
  6474. #endif
  6475. _md->scrollPointer = (card.longFilename[0] == '\0') ? card.filename : card.longFilename;
  6476. }
  6477. if (rewindFlag == 1)
  6478. _md->offset = 0; //redraw once again from the beginning.
  6479. if (_md->lcd_scrollTimer.expired(300) || rewindFlag)
  6480. {
  6481. uint8_t i = LCD_WIDTH - ((_md->isDir)?2:1);
  6482. lcd_set_cursor(0, _md->row);
  6483. lcd_print('>');
  6484. if (_md->isDir)
  6485. lcd_print(LCD_STR_FOLDER[0]);
  6486. for (; i != 0; i--)
  6487. {
  6488. const char* c = (_md->scrollPointer + _md->offset + ((LCD_WIDTH - ((_md->isDir)?2:1)) - i));
  6489. lcd_print(c[0]);
  6490. if (c[1])
  6491. _md->lcd_scrollTimer.start();
  6492. else
  6493. {
  6494. _md->lcd_scrollTimer.stop();
  6495. break; //stop at the end of the string
  6496. }
  6497. }
  6498. if (i != 0) //adds spaces if string is incomplete or at the end (instead of null).
  6499. {
  6500. lcd_space(i);
  6501. }
  6502. _md->offset++;
  6503. }
  6504. if (rewindFlag) //go back to sd_menu.
  6505. {
  6506. _md->lcd_scrollTimer.stop(); //forces redraw in _standard state
  6507. _md->menuState = _standard;
  6508. }
  6509. } break;
  6510. default: _md->menuState = _uninitialized; //shouldn't ever happen. Anyways, initialize the menu.
  6511. }
  6512. }
  6513. #ifdef TMC2130
  6514. static void lcd_belttest_v()
  6515. {
  6516. lcd_belttest();
  6517. menu_back_if_clicked();
  6518. }
  6519. void lcd_belttest()
  6520. {
  6521. lcd_clear();
  6522. // Belttest requires high power mode. Enable it.
  6523. FORCE_HIGH_POWER_START;
  6524. uint16_t X = eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_X));
  6525. uint16_t Y = eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_Y));
  6526. lcd_printf_P(_T(MSG_CHECKING_X));
  6527. lcd_set_cursor(0,1), lcd_printf_P(PSTR("X: %u -> ..."),X);
  6528. KEEPALIVE_STATE(IN_HANDLER);
  6529. // N.B: it doesn't make sense to handle !lcd_selfcheck...() because selftest_sg throws its own error screen
  6530. // that clobbers ours, with more info than we could provide. So on fail we just fall through to take us back to status.
  6531. if (lcd_selfcheck_axis_sg(X_AXIS)){
  6532. X = eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_X));
  6533. lcd_set_cursor(10,1), lcd_printf_P(PSTR("%u"),X); // Show new X value next to old one.
  6534. lcd_puts_at_P(0,2,_T(MSG_CHECKING_Y));
  6535. lcd_set_cursor(0,3), lcd_printf_P(PSTR("Y: %u -> ..."),Y);
  6536. if (lcd_selfcheck_axis_sg(Y_AXIS))
  6537. {
  6538. Y = eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_Y));
  6539. lcd_set_cursor(10,3),lcd_printf_P(PSTR("%u"),Y);
  6540. lcd_set_cursor(19, 3);
  6541. lcd_print(LCD_STR_UPLEVEL);
  6542. lcd_wait_for_click_delay(10);
  6543. }
  6544. }
  6545. FORCE_HIGH_POWER_END;
  6546. KEEPALIVE_STATE(NOT_BUSY);
  6547. }
  6548. #endif //TMC2130
  6549. #ifdef IR_SENSOR_ANALOG
  6550. // called also from marlin_main.cpp
  6551. void printf_IRSensorAnalogBoardChange(){
  6552. printf_P(PSTR("Filament sensor board change detected: revision%S\n"), FsensorIRVersionText());
  6553. }
  6554. static bool lcd_selftest_IRsensor(bool bStandalone)
  6555. {
  6556. bool bPCBrev04;
  6557. uint16_t volt_IR_int;
  6558. volt_IR_int = current_voltage_raw_IR;
  6559. bPCBrev04=(volt_IR_int < IRsensor_Hopen_TRESHOLD);
  6560. printf_P(PSTR("Measured filament sensor high level: %4.2fV\n"), Raw2Voltage(volt_IR_int) );
  6561. if(volt_IR_int < IRsensor_Hmin_TRESHOLD){
  6562. if(!bStandalone)
  6563. lcd_selftest_error(TestError::FsensorLevel,"HIGH","");
  6564. return(false);
  6565. }
  6566. lcd_show_fullscreen_message_and_wait_P(_i("Insert the filament (do not load it) into the extruder and then press the knob."));////MSG_INSERT_FIL c=20 r=6
  6567. volt_IR_int = current_voltage_raw_IR;
  6568. printf_P(PSTR("Measured filament sensor low level: %4.2fV\n"), Raw2Voltage(volt_IR_int));
  6569. if(volt_IR_int > (IRsensor_Lmax_TRESHOLD)){
  6570. if(!bStandalone)
  6571. lcd_selftest_error(TestError::FsensorLevel,"LOW","");
  6572. return(false);
  6573. }
  6574. if((bPCBrev04 ? 1 : 0) != (uint8_t)oFsensorPCB){ // safer then "(uint8_t)bPCBrev04"
  6575. oFsensorPCB=bPCBrev04 ? ClFsensorPCB::_Rev04 : ClFsensorPCB::_Old;
  6576. printf_IRSensorAnalogBoardChange();
  6577. eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_PCB,(uint8_t)oFsensorPCB);
  6578. }
  6579. return(true);
  6580. }
  6581. static void lcd_detect_IRsensor(){
  6582. bool bAction;
  6583. bool loaded;
  6584. bMenuFSDetect = true; // inhibits some code inside "manage_inactivity()"
  6585. /// Check if filament is loaded. If it is loaded stop detection.
  6586. /// @todo Add autodetection with MMU2s
  6587. loaded = ! READ(IR_SENSOR_PIN);
  6588. if(loaded ){
  6589. lcd_show_fullscreen_message_and_wait_P(_i("Please unload the filament first, then repeat this action."));////MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
  6590. return;
  6591. } else {
  6592. lcd_show_fullscreen_message_and_wait_P(_i("Please check the IR sensor connection, unload filament if present."));////MSG_CHECK_IR_CONNECTION c=20 r=4
  6593. bAction = lcd_selftest_IRsensor(true);
  6594. }
  6595. if(bAction){
  6596. lcd_show_fullscreen_message_and_wait_P(_i("Sensor verified, remove the filament now."));////MSG_FS_VERIFIED c=20 r=3
  6597. // the fsensor board has been successfully identified, any previous "not responding" may be cleared now
  6598. fsensor_not_responding = false;
  6599. } else {
  6600. lcd_show_fullscreen_message_and_wait_P(_i("Verification failed, remove the filament and try again."));////MSG_FIL_FAILED c=20 r=5
  6601. // here it is unclear what to to with the fsensor_not_responding flag
  6602. }
  6603. bMenuFSDetect=false; // de-inhibits some code inside "manage_inactivity()"
  6604. }
  6605. #endif //IR_SENSOR_ANALOG
  6606. static void lcd_selftest_v()
  6607. {
  6608. (void)lcd_selftest();
  6609. }
  6610. bool lcd_selftest()
  6611. {
  6612. int _progress = 0;
  6613. bool _result = true;
  6614. bool _swapped_fan = false;
  6615. #ifdef IR_SENSOR_ANALOG
  6616. //! Check if IR sensor is in unknown state, if so run Fsensor Detection
  6617. //! As the Fsensor Detection isn't yet ready for the mmu2s we set temporarily the IR sensor 0.3 or older for mmu2s
  6618. //! @todo Don't forget to remove this as soon Fsensor Detection works with mmu
  6619. if( oFsensorPCB == ClFsensorPCB::_Undef) {
  6620. if (!mmu_enabled) {
  6621. lcd_detect_IRsensor();
  6622. }
  6623. else {
  6624. eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_PCB,0);
  6625. }
  6626. }
  6627. #endif //IR_SENSOR_ANALOG
  6628. lcd_wait_for_cool_down();
  6629. lcd_clear();
  6630. lcd_puts_at_P(0, 0, _i("Self test start"));////MSG_SELFTEST_START c=20
  6631. #ifdef TMC2130
  6632. FORCE_HIGH_POWER_START;
  6633. #endif // TMC2130
  6634. FORCE_BL_ON_START;
  6635. _delay(2000);
  6636. KEEPALIVE_STATE(IN_HANDLER);
  6637. _progress = lcd_selftest_screen(TestScreen::ExtruderFan, _progress, 3, true, 2000);
  6638. #if (defined(FANCHECK) && defined(TACH_0))
  6639. switch (lcd_selftest_fan_auto(0)){ // check extruder Fan
  6640. case FanCheck::ExtruderFan:
  6641. _result = false;
  6642. break;
  6643. case FanCheck::SwappedFan:
  6644. _swapped_fan = true;
  6645. // FALLTHRU
  6646. default:
  6647. _result = true;
  6648. break;
  6649. }
  6650. #else //defined(TACH_0)
  6651. _result = lcd_selftest_manual_fan_check(0, false);
  6652. #endif //defined(TACH_0)
  6653. if (!_result)
  6654. {
  6655. lcd_selftest_error(TestError::ExtruderFan, "", "");
  6656. }
  6657. if (_result)
  6658. {
  6659. _progress = lcd_selftest_screen(TestScreen::PrintFan, _progress, 3, true, 2000);
  6660. #if (defined(FANCHECK) && defined(TACH_1))
  6661. switch (lcd_selftest_fan_auto(1)){ // check print fan
  6662. case FanCheck::PrintFan:
  6663. _result = false;
  6664. break;
  6665. case FanCheck::SwappedFan:
  6666. _swapped_fan = true;
  6667. // FALLTHRU
  6668. default:
  6669. _result = true;
  6670. break;
  6671. }
  6672. #else //defined(TACH_1)
  6673. _result = lcd_selftest_manual_fan_check(1, false);
  6674. #endif //defined(TACH_1)
  6675. if (!_result)
  6676. {
  6677. lcd_selftest_error(TestError::PrintFan, "", ""); //print fan not spinning
  6678. }
  6679. }
  6680. if (_swapped_fan) {
  6681. //turn on print fan and check that left extruder fan is not spinning
  6682. _result = lcd_selftest_manual_fan_check(1, true);
  6683. if (_result) {
  6684. //print fan is stil turned on; check that it is spinning
  6685. _result = lcd_selftest_manual_fan_check(1, false, true);
  6686. if (!_result){
  6687. lcd_selftest_error(TestError::PrintFan, "", "");
  6688. }
  6689. }
  6690. else {
  6691. // fans are swapped
  6692. lcd_selftest_error(TestError::SwappedFan, "", "");
  6693. }
  6694. }
  6695. if (_result)
  6696. {
  6697. _progress = lcd_selftest_screen(TestScreen::FansOk, _progress, 3, true, 2000);
  6698. _result = lcd_selfcheck_endstops(); //With TMC2130, only the Z probe is tested.
  6699. }
  6700. if (_result)
  6701. {
  6702. //current_position[Z_AXIS] += 15; //move Z axis higher to avoid false triggering of Z end stop in case that we are very low - just above heatbed
  6703. _progress = lcd_selftest_screen(TestScreen::AxisX, _progress, 3, true, 2000);
  6704. #ifdef TMC2130
  6705. _result = lcd_selfcheck_axis_sg(X_AXIS);
  6706. #else
  6707. _result = lcd_selfcheck_axis(X_AXIS, X_MAX_POS);
  6708. #endif //TMC2130
  6709. }
  6710. if (_result)
  6711. {
  6712. _progress = lcd_selftest_screen(TestScreen::AxisX, _progress, 3, true, 0);
  6713. #ifndef TMC2130
  6714. _result = lcd_selfcheck_pulleys(X_AXIS);
  6715. #endif
  6716. }
  6717. if (_result)
  6718. {
  6719. _progress = lcd_selftest_screen(TestScreen::AxisY, _progress, 3, true, 1500);
  6720. #ifdef TMC2130
  6721. _result = lcd_selfcheck_axis_sg(Y_AXIS);
  6722. #else
  6723. _result = lcd_selfcheck_axis(Y_AXIS, Y_MAX_POS);
  6724. #endif // TMC2130
  6725. }
  6726. if (_result)
  6727. {
  6728. _progress = lcd_selftest_screen(TestScreen::AxisZ, _progress, 3, true, 0);
  6729. #ifndef TMC2130
  6730. _result = lcd_selfcheck_pulleys(Y_AXIS);
  6731. #endif // TMC2130
  6732. }
  6733. if (_result)
  6734. {
  6735. #ifdef TMC2130
  6736. tmc2130_home_exit();
  6737. enable_endstops(false);
  6738. #endif
  6739. //homeaxis(X_AXIS);
  6740. //homeaxis(Y_AXIS);
  6741. current_position[X_AXIS] = pgm_read_float(bed_ref_points_4);
  6742. current_position[Y_AXIS] = pgm_read_float(bed_ref_points_4+1);
  6743. #ifdef TMC2130
  6744. //current_position[X_AXIS] += 0;
  6745. current_position[Y_AXIS] += 4;
  6746. #endif //TMC2130
  6747. current_position[Z_AXIS] = current_position[Z_AXIS] + 10;
  6748. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6749. st_synchronize();
  6750. set_destination_to_current();
  6751. _progress = lcd_selftest_screen(TestScreen::AxisZ, _progress, 3, true, 1500);
  6752. #ifdef TMC2130
  6753. homeaxis(Z_AXIS); //In case of failure, the code gets stuck in this function.
  6754. #else
  6755. _result = lcd_selfcheck_axis(Z_AXIS, Z_MAX_POS);
  6756. #endif //TMC2130
  6757. //raise Z to not damage the bed during and hotend testing
  6758. current_position[Z_AXIS] += 20;
  6759. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6760. st_synchronize();
  6761. }
  6762. #ifdef TMC2130
  6763. if (_result)
  6764. {
  6765. current_position[Z_AXIS] = current_position[Z_AXIS] + 10;
  6766. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6767. st_synchronize();
  6768. _progress = lcd_selftest_screen(TestScreen::Home, 0, 2, true, 0);
  6769. bool bres = tmc2130_home_calibrate(X_AXIS);
  6770. _progress = lcd_selftest_screen(TestScreen::Home, 1, 2, true, 0);
  6771. bres &= tmc2130_home_calibrate(Y_AXIS);
  6772. _progress = lcd_selftest_screen(TestScreen::Home, 2, 2, true, 0);
  6773. if (bres)
  6774. eeprom_update_byte((uint8_t*)EEPROM_TMC2130_HOME_ENABLED, 1);
  6775. _result = bres;
  6776. }
  6777. #endif //TMC2130
  6778. if (_result)
  6779. {
  6780. _progress = lcd_selftest_screen(TestScreen::Bed, _progress, 3, true, 2000);
  6781. _result = lcd_selfcheck_check_heater(true);
  6782. }
  6783. if (_result)
  6784. {
  6785. _progress = lcd_selftest_screen(TestScreen::Hotend, _progress, 3, true, 1000);
  6786. _result = lcd_selfcheck_check_heater(false);
  6787. }
  6788. if (_result)
  6789. {
  6790. _progress = lcd_selftest_screen(TestScreen::HotendOk, _progress, 3, true, 2000); //nozzle ok
  6791. }
  6792. #ifdef FILAMENT_SENSOR
  6793. if (_result)
  6794. {
  6795. if (mmu_enabled)
  6796. {
  6797. _progress = lcd_selftest_screen(TestScreen::Fsensor, _progress, 3, true, 2000); //check filaments sensor
  6798. _result = selftest_irsensor();
  6799. if (_result)
  6800. {
  6801. _progress = lcd_selftest_screen(TestScreen::FsensorOk, _progress, 3, true, 2000); //fil sensor OK
  6802. }
  6803. } else
  6804. {
  6805. #ifdef PAT9125
  6806. _progress = lcd_selftest_screen(TestScreen::Fsensor, _progress, 3, true, 2000); //check filaments sensor
  6807. _result = lcd_selftest_fsensor();
  6808. if (_result)
  6809. {
  6810. _progress = lcd_selftest_screen(TestScreen::FsensorOk, _progress, 3, true, 2000); //fil sensor OK
  6811. }
  6812. #endif //PAT9125
  6813. #if 0
  6814. // Intentionally disabled - that's why we moved the detection to runtime by just checking the two voltages.
  6815. // The idea is not to force the user to remove and insert the filament on an assembled printer.
  6816. //def IR_SENSOR_ANALOG
  6817. _progress = lcd_selftest_screen(TestScreen::Fsensor, _progress, 3, true, 2000); //check filament sensor
  6818. _result = lcd_selftest_IRsensor();
  6819. if (_result)
  6820. {
  6821. _progress = lcd_selftest_screen(TestScreen::FsensorOk, _progress, 3, true, 2000); //filament sensor OK
  6822. }
  6823. #endif //IR_SENSOR_ANALOG
  6824. }
  6825. }
  6826. #endif //FILAMENT_SENSOR
  6827. if (_result)
  6828. {
  6829. _progress = lcd_selftest_screen(TestScreen::AllCorrect, _progress, 3, true, 5000); //all correct
  6830. }
  6831. else
  6832. {
  6833. _progress = lcd_selftest_screen(TestScreen::Failed, _progress, 3, true, 5000);
  6834. }
  6835. lcd_reset_alert_level();
  6836. enquecommand_P(PSTR("M84"));
  6837. lcd_update_enable(true);
  6838. if (_result)
  6839. {
  6840. LCD_ALERTMESSAGERPGM(_i("Self test OK"));////MSG_SELFTEST_OK c=20
  6841. }
  6842. else
  6843. {
  6844. LCD_ALERTMESSAGERPGM(_T(MSG_SELFTEST_FAILED));
  6845. }
  6846. #ifdef TMC2130
  6847. FORCE_HIGH_POWER_END;
  6848. #endif // TMC2130
  6849. FORCE_BL_ON_END;
  6850. KEEPALIVE_STATE(NOT_BUSY);
  6851. return(_result);
  6852. }
  6853. #ifdef TMC2130
  6854. static void reset_crash_det(unsigned char axis) {
  6855. current_position[axis] += 10;
  6856. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6857. st_synchronize();
  6858. if (eeprom_read_byte((uint8_t*)EEPROM_CRASH_DET)) tmc2130_sg_stop_on_crash = true;
  6859. }
  6860. static bool lcd_selfcheck_axis_sg(unsigned char axis) {
  6861. // each axis length is measured twice
  6862. float axis_length, current_position_init, current_position_final;
  6863. float measured_axis_length[2];
  6864. float margin = 60;
  6865. float max_error_mm = 5;
  6866. switch (axis) {
  6867. case 0: axis_length = X_MAX_POS; break;
  6868. case 1: axis_length = Y_MAX_POS + 8; break;
  6869. default: axis_length = 210; break;
  6870. }
  6871. tmc2130_sg_stop_on_crash = false;
  6872. tmc2130_home_exit();
  6873. enable_endstops(true);
  6874. raise_z_above(MESH_HOME_Z_SEARCH);
  6875. st_synchronize();
  6876. tmc2130_home_enter(1 << axis);
  6877. // first axis length measurement begin
  6878. current_position[axis] -= (axis_length + margin);
  6879. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6880. st_synchronize();
  6881. tmc2130_sg_meassure_start(axis);
  6882. current_position_init = st_get_position_mm(axis);
  6883. current_position[axis] += 2 * margin;
  6884. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6885. st_synchronize();
  6886. current_position[axis] += axis_length;
  6887. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6888. st_synchronize();
  6889. uint16_t sg1 = tmc2130_sg_meassure_stop();
  6890. printf_P(PSTR("%c AXIS SG1=%d\n"), 'X'+axis, sg1);
  6891. eeprom_write_word(((uint16_t*)((axis == X_AXIS)?EEPROM_BELTSTATUS_X:EEPROM_BELTSTATUS_Y)), sg1);
  6892. current_position_final = st_get_position_mm(axis);
  6893. measured_axis_length[0] = abs(current_position_final - current_position_init);
  6894. // first measurement end and second measurement begin
  6895. current_position[axis] -= margin;
  6896. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6897. st_synchronize();
  6898. current_position[axis] -= (axis_length + margin);
  6899. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6900. st_synchronize();
  6901. current_position_init = st_get_position_mm(axis);
  6902. measured_axis_length[1] = abs(current_position_final - current_position_init);
  6903. tmc2130_home_exit();
  6904. //end of second measurement, now check for possible errors:
  6905. for(uint_least8_t i = 0; i < 2; i++){ //check if measured axis length corresponds to expected length
  6906. printf_P(_N("Measured axis length:%.3f\n"), measured_axis_length[i]);
  6907. if (abs(measured_axis_length[i] - axis_length) > max_error_mm) {
  6908. enable_endstops(false);
  6909. const char *_error_1;
  6910. if (axis == X_AXIS) _error_1 = "X";
  6911. if (axis == Y_AXIS) _error_1 = "Y";
  6912. if (axis == Z_AXIS) _error_1 = "Z";
  6913. lcd_selftest_error(TestError::Axis, _error_1, "");
  6914. current_position[axis] = 0;
  6915. plan_set_position_curposXYZE();
  6916. reset_crash_det(axis);
  6917. enable_endstops(true);
  6918. endstops_hit_on_purpose();
  6919. return false;
  6920. }
  6921. }
  6922. printf_P(_N("Axis length difference:%.3f\n"), abs(measured_axis_length[0] - measured_axis_length[1]));
  6923. if (abs(measured_axis_length[0] - measured_axis_length[1]) > 1) { //check if difference between first and second measurement is low
  6924. //loose pulleys
  6925. const char *_error_1;
  6926. if (axis == X_AXIS) _error_1 = "X";
  6927. if (axis == Y_AXIS) _error_1 = "Y";
  6928. if (axis == Z_AXIS) _error_1 = "Z";
  6929. lcd_selftest_error(TestError::Pulley, _error_1, "");
  6930. current_position[axis] = 0;
  6931. plan_set_position_curposXYZE();
  6932. reset_crash_det(axis);
  6933. endstops_hit_on_purpose();
  6934. return false;
  6935. }
  6936. current_position[axis] = 0;
  6937. plan_set_position_curposXYZE();
  6938. reset_crash_det(axis);
  6939. endstops_hit_on_purpose();
  6940. return true;
  6941. }
  6942. #endif //TMC2130
  6943. #ifndef TMC2130
  6944. static bool lcd_selfcheck_axis(int _axis, int _travel)
  6945. {
  6946. // printf_P(PSTR("lcd_selfcheck_axis %d, %d\n"), _axis, _travel);
  6947. bool _stepdone = false;
  6948. bool _stepresult = false;
  6949. int _progress = 0;
  6950. int _travel_done = 0;
  6951. int _err_endstop = 0;
  6952. int _lcd_refresh = 0;
  6953. _travel = _travel + (_travel / 10);
  6954. if (_axis == X_AXIS) {
  6955. current_position[Z_AXIS] += 17;
  6956. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6957. }
  6958. do {
  6959. current_position[_axis] = current_position[_axis] - 1;
  6960. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  6961. st_synchronize();
  6962. #ifdef TMC2130
  6963. if ((READ(Z_MIN_PIN) ^ (bool)Z_MIN_ENDSTOP_INVERTING))
  6964. #else //TMC2130
  6965. if ((READ(X_MIN_PIN) ^ (bool)X_MIN_ENDSTOP_INVERTING) ||
  6966. (READ(Y_MIN_PIN) ^ (bool)Y_MIN_ENDSTOP_INVERTING) ||
  6967. (READ(Z_MIN_PIN) ^ (bool)Z_MIN_ENDSTOP_INVERTING))
  6968. #endif //TMC2130
  6969. {
  6970. if (_axis == 0)
  6971. {
  6972. _stepresult = ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ? true : false;
  6973. _err_endstop = ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) ? 1 : 2;
  6974. }
  6975. if (_axis == 1)
  6976. {
  6977. _stepresult = ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) ? true : false;
  6978. _err_endstop = ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ? 0 : 2;
  6979. }
  6980. if (_axis == 2)
  6981. {
  6982. _stepresult = ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1) ? true : false;
  6983. _err_endstop = ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ? 0 : 1;
  6984. printf_P(PSTR("lcd_selfcheck_axis %d, %d\n"), _stepresult, _err_endstop);
  6985. /*disable_x();
  6986. disable_y();
  6987. disable_z();*/
  6988. }
  6989. _stepdone = true;
  6990. }
  6991. if (_lcd_refresh < 6)
  6992. {
  6993. _lcd_refresh++;
  6994. }
  6995. else
  6996. {
  6997. _progress = lcd_selftest_screen(static_cast<TestScreen>(static_cast<int>(TestScreen::AxisX) + _axis), _progress, 3, false, 0);
  6998. _lcd_refresh = 0;
  6999. }
  7000. manage_heater();
  7001. manage_inactivity(true);
  7002. //_delay(100);
  7003. (_travel_done <= _travel) ? _travel_done++ : _stepdone = true;
  7004. } while (!_stepdone);
  7005. //current_position[_axis] = current_position[_axis] + 15;
  7006. //plan_buffer_line_curposXYZE(manual_feedrate[0] / 60, active_extruder);
  7007. if (!_stepresult)
  7008. {
  7009. const char *_error_1;
  7010. const char *_error_2;
  7011. if (_axis == X_AXIS) _error_1 = "X";
  7012. if (_axis == Y_AXIS) _error_1 = "Y";
  7013. if (_axis == Z_AXIS) _error_1 = "Z";
  7014. if (_err_endstop == 0) _error_2 = "X";
  7015. if (_err_endstop == 1) _error_2 = "Y";
  7016. if (_err_endstop == 2) _error_2 = "Z";
  7017. if (_travel_done >= _travel)
  7018. {
  7019. lcd_selftest_error(TestError::Endstop, _error_1, _error_2);
  7020. }
  7021. else
  7022. {
  7023. lcd_selftest_error(TestError::Motor, _error_1, _error_2);
  7024. }
  7025. }
  7026. current_position[_axis] = 0; //simulate axis home to avoid negative numbers for axis position, especially Z.
  7027. plan_set_position_curposXYZE();
  7028. return _stepresult;
  7029. }
  7030. static bool lcd_selfcheck_pulleys(int axis)
  7031. {
  7032. float tmp_motor_loud[3] = DEFAULT_PWM_MOTOR_CURRENT_LOUD;
  7033. float tmp_motor[3] = DEFAULT_PWM_MOTOR_CURRENT;
  7034. float current_position_init;
  7035. float move;
  7036. bool endstop_triggered = false;
  7037. int i;
  7038. unsigned long timeout_counter;
  7039. refresh_cmd_timeout();
  7040. manage_inactivity(true);
  7041. if (axis == 0) move = 50; //X_AXIS
  7042. else move = 50; //Y_AXIS
  7043. current_position_init = current_position[axis];
  7044. current_position[axis] += 2;
  7045. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7046. for (i = 0; i < 5; i++) {
  7047. refresh_cmd_timeout();
  7048. current_position[axis] = current_position[axis] + move;
  7049. st_current_set(0, 850); //set motor current higher
  7050. plan_buffer_line_curposXYZE(200);
  7051. st_synchronize();
  7052. if (SilentModeMenu != SILENT_MODE_OFF) st_current_set(0, tmp_motor[0]); //set back to normal operation currents
  7053. else st_current_set(0, tmp_motor_loud[0]); //set motor current back
  7054. current_position[axis] = current_position[axis] - move;
  7055. plan_buffer_line_curposXYZE(50);
  7056. st_synchronize();
  7057. if (((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ||
  7058. ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1)) {
  7059. lcd_selftest_error(TestError::Pulley, (axis == 0) ? "X" : "Y", "");
  7060. return(false);
  7061. }
  7062. }
  7063. timeout_counter = _millis() + 2500;
  7064. endstop_triggered = false;
  7065. manage_inactivity(true);
  7066. while (!endstop_triggered) {
  7067. if (((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ||
  7068. ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1)) {
  7069. endstop_triggered = true;
  7070. if (current_position_init - 1 <= current_position[axis] && current_position_init + 1 >= current_position[axis]) {
  7071. current_position[axis] += 10;
  7072. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7073. st_synchronize();
  7074. return(true);
  7075. }
  7076. else {
  7077. lcd_selftest_error(TestError::Pulley, (axis == 0) ? "X" : "Y", "");
  7078. return(false);
  7079. }
  7080. }
  7081. else {
  7082. current_position[axis] -= 1;
  7083. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7084. st_synchronize();
  7085. if (_millis() > timeout_counter) {
  7086. lcd_selftest_error(TestError::Pulley, (axis == 0) ? "X" : "Y", "");
  7087. return(false);
  7088. }
  7089. }
  7090. }
  7091. return(true);
  7092. }
  7093. #endif //not defined TMC2130
  7094. static bool lcd_selfcheck_endstops()
  7095. {
  7096. bool _result = true;
  7097. if (
  7098. #ifndef TMC2130
  7099. ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ||
  7100. ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) ||
  7101. #endif //!TMC2130
  7102. ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1))
  7103. {
  7104. #ifndef TMC2130
  7105. if ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) current_position[0] += 10;
  7106. if ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) current_position[1] += 10;
  7107. #endif //!TMC2130
  7108. if ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1) current_position[2] += 10;
  7109. }
  7110. plan_buffer_line_curposXYZE(manual_feedrate[0] / 60);
  7111. st_synchronize();
  7112. if (
  7113. #ifndef TMC2130
  7114. ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ||
  7115. ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) ||
  7116. #endif //!TMC2130
  7117. ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1))
  7118. {
  7119. _result = false;
  7120. char _error[4] = "";
  7121. #ifndef TMC2130
  7122. if ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "X");
  7123. if ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "Y");
  7124. #endif //!TMC2130
  7125. if ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "Z");
  7126. lcd_selftest_error(TestError::Endstops, _error, "");
  7127. }
  7128. manage_heater();
  7129. manage_inactivity(true);
  7130. return _result;
  7131. }
  7132. static bool lcd_selfcheck_check_heater(bool _isbed)
  7133. {
  7134. int _counter = 0;
  7135. int _progress = 0;
  7136. bool _stepresult = false;
  7137. bool _docycle = true;
  7138. int _checked_snapshot = (_isbed) ? degBed() : degHotend(0);
  7139. int _opposite_snapshot = (_isbed) ? degHotend(0) : degBed();
  7140. int _cycles = (_isbed) ? 180 : 60; //~ 90s / 30s
  7141. target_temperature[0] = (_isbed) ? 0 : 200;
  7142. target_temperature_bed = (_isbed) ? 100 : 0;
  7143. manage_heater();
  7144. manage_inactivity(true);
  7145. KEEPALIVE_STATE(NOT_BUSY); //we are sending temperatures on serial line, so no need to send host keepalive messages
  7146. do {
  7147. _counter++;
  7148. _docycle = (_counter < _cycles) ? true : false;
  7149. manage_heater();
  7150. manage_inactivity(true);
  7151. _progress = (_isbed) ? lcd_selftest_screen(TestScreen::Bed, _progress, 2, false, 400) : lcd_selftest_screen(TestScreen::Hotend, _progress, 2, false, 400);
  7152. /*if (_isbed) {
  7153. MYSERIAL.print("Bed temp:");
  7154. MYSERIAL.println(degBed());
  7155. }
  7156. else {
  7157. MYSERIAL.print("Hotend temp:");
  7158. MYSERIAL.println(degHotend(0));
  7159. }*/
  7160. if(_counter%5 == 0) serialecho_temperatures(); //show temperatures once in two seconds
  7161. } while (_docycle);
  7162. target_temperature[0] = 0;
  7163. target_temperature_bed = 0;
  7164. manage_heater();
  7165. int _checked_result = (_isbed) ? degBed() - _checked_snapshot : degHotend(0) - _checked_snapshot;
  7166. int _opposite_result = (_isbed) ? degHotend(0) - _opposite_snapshot : degBed() - _opposite_snapshot;
  7167. /*
  7168. MYSERIAL.println("");
  7169. MYSERIAL.print("Checked result:");
  7170. MYSERIAL.println(_checked_result);
  7171. MYSERIAL.print("Opposite result:");
  7172. MYSERIAL.println(_opposite_result);
  7173. */
  7174. if (_opposite_result < ((_isbed) ? 30 : 9))
  7175. {
  7176. if (_checked_result >= ((_isbed) ? 9 : 30))
  7177. {
  7178. _stepresult = true;
  7179. }
  7180. else
  7181. {
  7182. lcd_selftest_error(TestError::Heater, "", "");
  7183. }
  7184. }
  7185. else
  7186. {
  7187. lcd_selftest_error(TestError::Bed, "", "");
  7188. }
  7189. manage_heater();
  7190. manage_inactivity(true);
  7191. KEEPALIVE_STATE(IN_HANDLER);
  7192. return _stepresult;
  7193. }
  7194. static void lcd_selftest_error(TestError testError, const char *_error_1, const char *_error_2)
  7195. {
  7196. lcd_beeper_quick_feedback();
  7197. FORCE_BL_ON_END;
  7198. target_temperature[0] = 0;
  7199. target_temperature_bed = 0;
  7200. manage_heater();
  7201. manage_inactivity();
  7202. lcd_clear();
  7203. lcd_puts_at_P(0, 0, _i("Selftest error!"));////MSG_SELFTEST_ERROR c=20
  7204. lcd_puts_at_P(0, 1, _i("Please check:"));////MSG_SELFTEST_PLEASECHECK c=20
  7205. switch (testError)
  7206. {
  7207. case TestError::Heater:
  7208. lcd_puts_at_P(0, 2, _i("Heater/Thermistor"));////MSG_SELFTEST_HEATERTHERMISTOR c=20
  7209. lcd_puts_at_P(0, 3, _i("Not connected"));////MSG_SELFTEST_NOTCONNECTED c=20
  7210. break;
  7211. case TestError::Bed:
  7212. lcd_puts_at_P(0, 2, _i("Bed/Heater"));////MSG_SELFTEST_BEDHEATER c=20
  7213. lcd_puts_at_P(0, 3, _T(MSG_SELFTEST_WIRINGERROR));
  7214. break;
  7215. case TestError::Endstops:
  7216. lcd_puts_at_P(0, 2, _i("Endstops"));////MSG_SELFTEST_ENDSTOPS c=20
  7217. lcd_puts_at_P(0, 3, _T(MSG_SELFTEST_WIRINGERROR));
  7218. lcd_set_cursor(18, 3);
  7219. lcd_print(_error_1);
  7220. break;
  7221. case TestError::Motor:
  7222. lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_MOTOR));
  7223. lcd_set_cursor(18, 2);
  7224. lcd_print(_error_1);
  7225. lcd_puts_at_P(0, 3, _i("Endstop"));////MSG_SELFTEST_ENDSTOP c=16
  7226. lcd_set_cursor(18, 3);
  7227. lcd_print(_error_2);
  7228. break;
  7229. case TestError::Endstop:
  7230. lcd_puts_at_P(0, 2, _i("Endstop not hit"));////MSG_SELFTEST_ENDSTOP_NOTHIT c=20
  7231. lcd_puts_at_P(0, 3, _T(MSG_SELFTEST_MOTOR));
  7232. lcd_set_cursor(18, 3);
  7233. lcd_print(_error_1);
  7234. break;
  7235. case TestError::PrintFan:
  7236. lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_COOLING_FAN));
  7237. lcd_puts_at_P(0, 3, _T(MSG_SELFTEST_WIRINGERROR));
  7238. lcd_set_cursor(18, 3);
  7239. lcd_print(_error_1);
  7240. break;
  7241. case TestError::ExtruderFan:
  7242. lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_EXTRUDER_FAN));
  7243. lcd_puts_at_P(0, 3, _T(MSG_SELFTEST_WIRINGERROR));
  7244. lcd_set_cursor(18, 3);
  7245. lcd_print(_error_1);
  7246. break;
  7247. case TestError::Pulley:
  7248. lcd_puts_at_P(0, 2, _i("Loose pulley"));////MSG_LOOSE_PULLEY c=20
  7249. lcd_puts_at_P(0, 3, _T(MSG_SELFTEST_MOTOR));
  7250. lcd_set_cursor(18, 3);
  7251. lcd_print(_error_1);
  7252. break;
  7253. case TestError::Axis:
  7254. lcd_puts_at_P(0, 2, _i("Axis length"));////MSG_SELFTEST_AXIS_LENGTH c=20
  7255. lcd_puts_at_P(0, 3, _i("Axis"));////MSG_SELFTEST_AXIS c=16
  7256. lcd_set_cursor(18, 3);
  7257. lcd_print(_error_1);
  7258. break;
  7259. case TestError::SwappedFan:
  7260. lcd_puts_at_P(0, 2, _i("Front/left fans"));////MSG_SELFTEST_FANS c=20
  7261. lcd_puts_at_P(0, 3, _i("Swapped"));////MSG_SELFTEST_SWAPPED c=16
  7262. lcd_set_cursor(18, 3);
  7263. lcd_print(_error_1);
  7264. break;
  7265. case TestError::WiringFsensor:
  7266. lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_FILAMENT_SENSOR));
  7267. lcd_puts_at_P(0, 3, _T(MSG_SELFTEST_WIRINGERROR));
  7268. break;
  7269. case TestError::TriggeringFsensor:
  7270. lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_FILAMENT_SENSOR));
  7271. lcd_puts_at_P(0, 3, _i("False triggering"));////MSG_FALSE_TRIGGERING c=20
  7272. break;
  7273. case TestError::FsensorLevel:
  7274. lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_FILAMENT_SENSOR));
  7275. lcd_set_cursor(0, 3);
  7276. lcd_printf_P(_i("%s level expected"),_error_1);////MSG_SELFTEST_FS_LEVEL c=20
  7277. break;
  7278. }
  7279. _delay(1000);
  7280. lcd_beeper_quick_feedback();
  7281. do {
  7282. _delay(100);
  7283. manage_heater();
  7284. manage_inactivity();
  7285. } while (!lcd_clicked());
  7286. LCD_ALERTMESSAGERPGM(_T(MSG_SELFTEST_FAILED));
  7287. lcd_return_to_status();
  7288. }
  7289. #ifdef FILAMENT_SENSOR
  7290. #ifdef PAT9125
  7291. static bool lcd_selftest_fsensor(void)
  7292. {
  7293. fsensor_init();
  7294. if (fsensor_not_responding)
  7295. {
  7296. lcd_selftest_error(TestError::WiringFsensor, "", "");
  7297. }
  7298. return (!fsensor_not_responding);
  7299. }
  7300. #endif //PAT9125
  7301. //! @brief Self-test of infrared barrier filament sensor mounted on MK3S with MMUv2 printer
  7302. //!
  7303. //! Test whether sensor is not triggering filament presence when extruder idler is moving without filament.
  7304. //!
  7305. //! Steps:
  7306. //! * Backup current active extruder temperature
  7307. //! * Pre-heat to PLA extrude temperature.
  7308. //! * Unload filament possibly present.
  7309. //! * Move extruder idler same way as during filament load
  7310. //! and sample IR_SENSOR_PIN.
  7311. //! * Check that pin doesn't go low.
  7312. //!
  7313. //! @retval true passed
  7314. //! @retval false failed
  7315. static bool selftest_irsensor()
  7316. {
  7317. class TempBackup
  7318. {
  7319. public:
  7320. TempBackup():
  7321. m_temp(degTargetHotend(active_extruder)),
  7322. m_extruder(active_extruder){}
  7323. ~TempBackup(){setTargetHotend(m_temp,m_extruder);}
  7324. private:
  7325. float m_temp;
  7326. uint8_t m_extruder;
  7327. };
  7328. uint8_t progress;
  7329. {
  7330. TempBackup tempBackup;
  7331. setTargetHotend(ABS_PREHEAT_HOTEND_TEMP,active_extruder);
  7332. mmu_wait_for_heater_blocking();
  7333. progress = lcd_selftest_screen(TestScreen::Fsensor, 0, 1, true, 0);
  7334. mmu_filament_ramming();
  7335. }
  7336. progress = lcd_selftest_screen(TestScreen::Fsensor, progress, 1, true, 0);
  7337. mmu_command(MmuCmd::U0);
  7338. manage_response(false, false);
  7339. for(uint_least8_t i = 0; i < 200; ++i)
  7340. {
  7341. if (0 == (i % 32)) progress = lcd_selftest_screen(TestScreen::Fsensor, progress, 1, true, 0);
  7342. mmu_load_step(false);
  7343. while (blocks_queued())
  7344. {
  7345. if (READ(IR_SENSOR_PIN) == 0)
  7346. {
  7347. lcd_selftest_error(TestError::TriggeringFsensor, "", "");
  7348. return false;
  7349. }
  7350. #ifdef TMC2130
  7351. manage_heater();
  7352. // Vojtech: Don't disable motors inside the planner!
  7353. if (!tmc2130_update_sg())
  7354. {
  7355. manage_inactivity(true);
  7356. }
  7357. #else //TMC2130
  7358. manage_heater();
  7359. // Vojtech: Don't disable motors inside the planner!
  7360. manage_inactivity(true);
  7361. #endif //TMC2130
  7362. }
  7363. }
  7364. return true;
  7365. }
  7366. #endif //FILAMENT_SENSOR
  7367. static bool lcd_selftest_manual_fan_check(int _fan, bool check_opposite,
  7368. bool _default)
  7369. {
  7370. bool _result = check_opposite;
  7371. lcd_clear();
  7372. lcd_puts_at_P(0, 0, _T(MSG_SELFTEST_FAN));
  7373. switch (_fan)
  7374. {
  7375. case 0:
  7376. // extruder cooling fan
  7377. lcd_puts_at_P(0, 1, check_opposite ? _T(MSG_SELFTEST_COOLING_FAN) : _T(MSG_SELFTEST_EXTRUDER_FAN));
  7378. setExtruderAutoFanState(3);
  7379. break;
  7380. case 1:
  7381. // object cooling fan
  7382. lcd_puts_at_P(0, 1, check_opposite ? _T(MSG_SELFTEST_EXTRUDER_FAN) : _T(MSG_SELFTEST_COOLING_FAN));
  7383. SET_OUTPUT(FAN_PIN);
  7384. #ifdef FAN_SOFT_PWM
  7385. fanSpeedSoftPwm = 255;
  7386. #else //FAN_SOFT_PWM
  7387. analogWrite(FAN_PIN, 255);
  7388. #endif //FAN_SOFT_PWM
  7389. break;
  7390. }
  7391. _delay(500);
  7392. lcd_puts_at_P(1, 2, _T(MSG_SELFTEST_FAN_YES));
  7393. lcd_putc_at(0, 3, '>');
  7394. lcd_puts_at_P(1, 3, _T(MSG_SELFTEST_FAN_NO));
  7395. int8_t enc_dif = int(_default)*3;
  7396. KEEPALIVE_STATE(PAUSED_FOR_USER);
  7397. lcd_button_pressed = false;
  7398. do
  7399. {
  7400. if (abs((enc_dif - lcd_encoder_diff)) > 2) {
  7401. if (enc_dif > lcd_encoder_diff) {
  7402. _result = !check_opposite;
  7403. lcd_putc_at(0, 2, '>');
  7404. lcd_puts_at_P(1, 2, _T(MSG_SELFTEST_FAN_YES));
  7405. lcd_putc_at(0, 3, ' ');
  7406. lcd_puts_at_P(1, 3, _T(MSG_SELFTEST_FAN_NO));
  7407. }
  7408. if (enc_dif < lcd_encoder_diff) {
  7409. _result = check_opposite;
  7410. lcd_putc_at(0, 2, ' ');
  7411. lcd_puts_at_P(1, 2, _T(MSG_SELFTEST_FAN_YES));
  7412. lcd_putc_at(0, 3, '>');
  7413. lcd_puts_at_P(1, 3, _T(MSG_SELFTEST_FAN_NO));
  7414. }
  7415. enc_dif = 0;
  7416. lcd_encoder_diff = 0;
  7417. }
  7418. manage_heater();
  7419. _delay(100);
  7420. } while (!lcd_clicked());
  7421. KEEPALIVE_STATE(IN_HANDLER);
  7422. setExtruderAutoFanState(0);
  7423. SET_OUTPUT(FAN_PIN);
  7424. #ifdef FAN_SOFT_PWM
  7425. fanSpeedSoftPwm = 0;
  7426. #else //FAN_SOFT_PWM
  7427. analogWrite(FAN_PIN, 0);
  7428. #endif //FAN_SOFT_PWM
  7429. fanSpeed = 0;
  7430. manage_heater();
  7431. return _result;
  7432. }
  7433. #ifdef FANCHECK
  7434. static FanCheck lcd_selftest_fan_auto(int _fan)
  7435. {
  7436. switch (_fan) {
  7437. case 0:
  7438. fanSpeed = 0;
  7439. manage_heater(); //turn off fan
  7440. setExtruderAutoFanState(3); //extruder fan
  7441. #ifdef FAN_SOFT_PWM
  7442. extruder_autofan_last_check = _millis();
  7443. fan_measuring = true;
  7444. #endif //FAN_SOFT_PWM
  7445. _delay(2000);
  7446. setExtruderAutoFanState(0); //extruder fan
  7447. manage_heater(); //count average fan speed from 2s delay and turn off fans
  7448. puts_P(PSTR("Test 1:"));
  7449. printf_P(PSTR("Print fan speed: %d\n"), fan_speed[1]);
  7450. printf_P(PSTR("Extr fan speed: %d\n"), fan_speed[0]);
  7451. if (fan_speed[0] < 20) { // < 1200 RPM would mean either a faulty Noctua or Altfan
  7452. return FanCheck::ExtruderFan;
  7453. }
  7454. #ifdef FAN_SOFT_PWM
  7455. else if (fan_speed[0] > 50 ) { // printerFan is faster
  7456. return FanCheck::SwappedFan;
  7457. }
  7458. break;
  7459. #endif
  7460. case 1:
  7461. //will it work with Thotend > 50 C ?
  7462. #ifdef FAN_SOFT_PWM
  7463. fanSpeed = 255;
  7464. fanSpeedSoftPwm = 255;
  7465. extruder_autofan_last_check = _millis(); //store time when measurement starts
  7466. fan_measuring = true; //start fan measuring, rest is on manage_heater
  7467. #else //FAN_SOFT_PWM
  7468. fanSpeed = 150; //print fan
  7469. #endif //FAN_SOFT_PWM
  7470. for (uint8_t i = 0; i < 5; i++) {
  7471. delay_keep_alive(1000);
  7472. lcd_putc_at(18, 3, '-');
  7473. delay_keep_alive(1000);
  7474. lcd_putc_at(18, 3, '|');
  7475. }
  7476. fanSpeed = 0;
  7477. #ifdef FAN_SOFT_PWM
  7478. fanSpeedSoftPwm = 0;
  7479. #else //FAN_SOFT_PWM
  7480. manage_heater(); //turn off fan
  7481. manage_inactivity(true); //to turn off print fan
  7482. #endif //FAN_SOFT_PWM
  7483. puts_P(PSTR("Test 2:"));
  7484. printf_P(PSTR("Print fan speed: %d\n"), fan_speed[1]);
  7485. printf_P(PSTR("Extr fan speed: %d\n"), fan_speed[0]);
  7486. if (!fan_speed[1]) {
  7487. return FanCheck::PrintFan;
  7488. }
  7489. #ifdef FAN_SOFT_PWM
  7490. fanSpeed = 80;
  7491. fanSpeedSoftPwm = 80;
  7492. for (uint8_t i = 0; i < 5; i++) {
  7493. delay_keep_alive(1000);
  7494. lcd_putc_at(18, 3, '-');
  7495. delay_keep_alive(1000);
  7496. lcd_putc_at(18, 3, '|');
  7497. }
  7498. fanSpeed = 0;
  7499. // noctua speed is between 17 and 24, turbine more then 30
  7500. if (fan_speed[1] < 30) {
  7501. return FanCheck::SwappedFan;
  7502. }
  7503. #else
  7504. // fan is spinning, but measured RPM are too low for print fan, it must
  7505. // be left extruder fan
  7506. else if (fan_speed[1] < 34) {
  7507. return FanCheck::SwappedFan;
  7508. }
  7509. #endif //FAN_SOFT_PWM
  7510. break;
  7511. }
  7512. return FanCheck::Success;
  7513. }
  7514. #endif //FANCHECK
  7515. static int lcd_selftest_screen(TestScreen screen, int _progress, int _progress_scale, bool _clear, int _delay)
  7516. {
  7517. lcd_update_enable(false);
  7518. const char *_indicator = (_progress >= _progress_scale) ? "-" : "|";
  7519. if (_clear) lcd_clear();
  7520. lcd_set_cursor(0, 0);
  7521. if (screen == TestScreen::ExtruderFan) lcd_puts_P(_T(MSG_SELFTEST_FAN));
  7522. if (screen == TestScreen::PrintFan) lcd_puts_P(_T(MSG_SELFTEST_FAN));
  7523. if (screen == TestScreen::FansOk) lcd_puts_P(_T(MSG_SELFTEST_FAN));
  7524. if (screen == TestScreen::EndStops) lcd_puts_P(_i("Checking endstops"));////MSG_SELFTEST_CHECK_ENDSTOPS c=20
  7525. if (screen == TestScreen::AxisX) lcd_puts_P(_T(MSG_CHECKING_X));
  7526. if (screen == TestScreen::AxisY) lcd_puts_P(_T(MSG_CHECKING_Y));
  7527. if (screen == TestScreen::AxisZ) lcd_puts_P(_i("Checking Z axis"));////MSG_SELFTEST_CHECK_Z c=20
  7528. if (screen == TestScreen::Bed) lcd_puts_P(_T(MSG_SELFTEST_CHECK_BED));
  7529. if (screen == TestScreen::Hotend
  7530. || screen == TestScreen::HotendOk) lcd_puts_P(_i("Checking hotend"));////MSG_SELFTEST_CHECK_HOTEND c=20
  7531. if (screen == TestScreen::Fsensor) lcd_puts_P(_T(MSG_SELFTEST_CHECK_FSENSOR));
  7532. if (screen == TestScreen::FsensorOk) lcd_puts_P(_T(MSG_SELFTEST_CHECK_FSENSOR));
  7533. if (screen == TestScreen::AllCorrect) lcd_puts_P(_i("All correct"));////MSG_SELFTEST_CHECK_ALLCORRECT c=20
  7534. if (screen == TestScreen::Failed) lcd_puts_P(_T(MSG_SELFTEST_FAILED));
  7535. if (screen == TestScreen::Home) lcd_puts_P(_i("Calibrating home"));////MSG_CALIBRATING_HOME c=20
  7536. lcd_puts_at_P(0, 1, separator);
  7537. if ((screen >= TestScreen::ExtruderFan) && (screen <= TestScreen::FansOk))
  7538. {
  7539. //SERIAL_ECHOLNPGM("Fan test");
  7540. lcd_puts_at_P(0, 2, _i("Extruder fan:"));////MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
  7541. lcd_set_cursor(18, 2);
  7542. (screen < TestScreen::PrintFan) ? lcd_print(_indicator) : lcd_print("OK");
  7543. lcd_puts_at_P(0, 3, _i("Print fan:"));////MSG_SELFTEST_PRINT_FAN_SPEED c=18
  7544. lcd_set_cursor(18, 3);
  7545. (screen < TestScreen::FansOk) ? lcd_print(_indicator) : lcd_print("OK");
  7546. }
  7547. else if (screen >= TestScreen::Fsensor && screen <= TestScreen::FsensorOk)
  7548. {
  7549. lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_FILAMENT_SENSOR));
  7550. lcd_putc(':');
  7551. lcd_set_cursor(18, 2);
  7552. (screen == TestScreen::Fsensor) ? lcd_print(_indicator) : lcd_print("OK");
  7553. }
  7554. else if (screen < TestScreen::Fsensor)
  7555. {
  7556. //SERIAL_ECHOLNPGM("Other tests");
  7557. TestScreen _step_block = TestScreen::AxisX;
  7558. lcd_selftest_screen_step(2, 2, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), PSTR("X"), _indicator);
  7559. _step_block = TestScreen::AxisY;
  7560. lcd_selftest_screen_step(2, 8, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), PSTR("Y"), _indicator);
  7561. _step_block = TestScreen::AxisZ;
  7562. lcd_selftest_screen_step(2, 14, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), PSTR("Z"), _indicator);
  7563. _step_block = TestScreen::Bed;
  7564. lcd_selftest_screen_step(3, 0, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), PSTR("Bed"), _indicator);
  7565. _step_block = TestScreen::Hotend;
  7566. lcd_selftest_screen_step(3, 9, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), PSTR("Hotend"), _indicator);
  7567. }
  7568. if (_delay > 0) delay_keep_alive(_delay);
  7569. _progress++;
  7570. return (_progress >= _progress_scale * 2) ? 0 : _progress;
  7571. }
  7572. static void lcd_selftest_screen_step(int _row, int _col, int _state, const char *_name_PROGMEM, const char *_indicator)
  7573. {
  7574. lcd_set_cursor(_col, _row);
  7575. uint8_t strlenNameP = strlen_P(_name_PROGMEM);
  7576. switch (_state)
  7577. {
  7578. case 1:
  7579. lcd_puts_P(_name_PROGMEM);
  7580. lcd_putc_at(_col + strlenNameP, _row, ':');
  7581. lcd_set_cursor(_col + strlenNameP + 1, _row);
  7582. lcd_print(_indicator);
  7583. break;
  7584. case 2:
  7585. lcd_puts_P(_name_PROGMEM);
  7586. lcd_putc_at(_col + strlenNameP, _row, ':');
  7587. lcd_puts_at_P(_col + strlenNameP + 1, _row, PSTR("OK"));
  7588. break;
  7589. default:
  7590. lcd_puts_P(_name_PROGMEM);
  7591. }
  7592. }
  7593. /** End of menus **/
  7594. /** Menu action functions **/
  7595. static bool check_file(const char* filename) {
  7596. if (farm_mode) return true;
  7597. card.openFileReadFilteredGcode(filename, true);
  7598. bool result = false;
  7599. const uint32_t filesize = card.getFileSize();
  7600. uint32_t startPos = 0;
  7601. const uint16_t bytesToCheck = min(END_FILE_SECTION, filesize);
  7602. if (filesize > END_FILE_SECTION) {
  7603. startPos = filesize - END_FILE_SECTION;
  7604. card.setIndex(startPos);
  7605. }
  7606. cmdqueue_reset();
  7607. cmdqueue_serial_disabled = true;
  7608. menu_progressbar_init(bytesToCheck, _i("Checking file"));////MSG_CHECKING_FILE c=17
  7609. while (!card.eof() && !result) {
  7610. menu_progressbar_update(card.get_sdpos() - startPos);
  7611. card.sdprinting = true;
  7612. get_command();
  7613. result = check_commands();
  7614. }
  7615. menu_progressbar_finish();
  7616. cmdqueue_serial_disabled = false;
  7617. card.printingHasFinished();
  7618. lcd_setstatuspgm(_T(WELCOME_MSG));
  7619. lcd_finishstatus();
  7620. return result;
  7621. }
  7622. static void menu_action_sdfile(const char* filename)
  7623. {
  7624. loading_flag = false;
  7625. char cmd[30];
  7626. char* c;
  7627. bool result = true;
  7628. sprintf_P(cmd, PSTR("M23 %s"), filename);
  7629. for (c = &cmd[4]; *c; c++)
  7630. *c = tolower(*c);
  7631. const char end[5] = ".gco";
  7632. //we are storing just first 8 characters of 8.3 filename assuming that extension is always ".gco"
  7633. for (uint_least8_t i = 0; i < 8; i++) {
  7634. if (strcmp((cmd + i + 4), end) == 0) {
  7635. //filename is shorter then 8.3, store '\0' character on position where ".gco" string was found to terminate stored string properly
  7636. eeprom_write_byte((uint8_t*)EEPROM_FILENAME + i, '\0');
  7637. break;
  7638. }
  7639. else {
  7640. eeprom_write_byte((uint8_t*)EEPROM_FILENAME + i, cmd[i + 4]);
  7641. }
  7642. }
  7643. uint8_t depth = (uint8_t)card.getWorkDirDepth();
  7644. eeprom_write_byte((uint8_t*)EEPROM_DIR_DEPTH, depth);
  7645. for (uint_least8_t i = 0; i < depth; i++) {
  7646. for (uint_least8_t j = 0; j < 8; j++) {
  7647. eeprom_write_byte((uint8_t*)EEPROM_DIRS + j + 8 * i, card.dir_names[i][j]);
  7648. }
  7649. }
  7650. //filename is just a pointer to card.filename, which changes everytime you try to open a file by filename. So you can't use filename directly
  7651. //to open a file. Instead, the cached filename in cmd is used as that one is static for the whole lifetime of this function.
  7652. if (!check_file(cmd + 4)) {
  7653. result = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("File incomplete. Continue anyway?"), false, false);////MSG_FILE_INCOMPLETE c=20 r=3
  7654. lcd_update_enable(true);
  7655. }
  7656. if (result) {
  7657. enquecommand(cmd);
  7658. enquecommand_P(PSTR("M24"));
  7659. }
  7660. lcd_return_to_status();
  7661. }
  7662. void menu_action_sddirectory(const char* filename)
  7663. {
  7664. card.chdir(filename, true);
  7665. lcd_encoder = 0;
  7666. menu_data_reset(); //Forces reloading of cached variables.
  7667. }
  7668. /** LCD API **/
  7669. void ultralcd_init()
  7670. {
  7671. {
  7672. uint8_t autoDepleteRaw = eeprom_read_byte(reinterpret_cast<uint8_t*>(EEPROM_AUTO_DEPLETE));
  7673. if (0xff == autoDepleteRaw) lcd_autoDeplete = false;
  7674. else lcd_autoDeplete = autoDepleteRaw;
  7675. }
  7676. backlight_init();
  7677. lcd_init();
  7678. lcd_refresh();
  7679. lcd_longpress_func = menu_lcd_longpress_func;
  7680. lcd_charsetup_func = menu_lcd_charsetup_func;
  7681. lcd_lcdupdate_func = menu_lcd_lcdupdate_func;
  7682. menu_menu = lcd_status_screen;
  7683. menu_lcd_charsetup_func();
  7684. SET_INPUT(BTN_EN1);
  7685. SET_INPUT(BTN_EN2);
  7686. WRITE(BTN_EN1, HIGH);
  7687. WRITE(BTN_EN2, HIGH);
  7688. #if BTN_ENC > 0
  7689. SET_INPUT(BTN_ENC);
  7690. WRITE(BTN_ENC, HIGH);
  7691. #endif
  7692. #if defined (SDSUPPORT) && defined(SDCARDDETECT) && (SDCARDDETECT > 0)
  7693. pinMode(SDCARDDETECT, INPUT);
  7694. WRITE(SDCARDDETECT, HIGH);
  7695. lcd_oldcardstatus = IS_SD_INSERTED;
  7696. #endif//(SDCARDDETECT > 0)
  7697. lcd_encoder_diff = 0;
  7698. }
  7699. void lcd_printer_connected() {
  7700. printer_connected = true;
  7701. }
  7702. static void lcd_send_status() {
  7703. if (farm_mode && no_response && ((_millis() - NcTime) > (NC_TIME * 1000))) {
  7704. //send important status messages periodicaly
  7705. prusa_statistics(important_status, saved_filament_type);
  7706. NcTime = _millis();
  7707. #ifdef FARM_CONNECT_MESSAGE
  7708. lcd_connect_printer();
  7709. #endif //FARM_CONNECT_MESSAGE
  7710. }
  7711. }
  7712. #ifdef FARM_CONNECT_MESSAGE
  7713. static void lcd_connect_printer() {
  7714. lcd_update_enable(false);
  7715. lcd_clear();
  7716. int i = 0;
  7717. int t = 0;
  7718. lcd_puts_at_P(0, 0, _i("Connect printer to"));
  7719. lcd_puts_at_P(0, 1, _i("monitoring or hold"));
  7720. lcd_puts_at_P(0, 2, _i("the knob to continue"));
  7721. while (no_response) {
  7722. i++;
  7723. t++;
  7724. delay_keep_alive(100);
  7725. proc_commands();
  7726. if (t == 10) {
  7727. prusa_statistics(important_status, saved_filament_type);
  7728. t = 0;
  7729. }
  7730. if (READ(BTN_ENC)) { //if button is not pressed
  7731. i = 0;
  7732. lcd_puts_at_P(0, 3, PSTR(" "));
  7733. }
  7734. if (i!=0) lcd_puts_at_P((i * 20) / (NC_BUTTON_LONG_PRESS * 10), 3, "\xFF");
  7735. if (i == NC_BUTTON_LONG_PRESS * 10) {
  7736. no_response = false;
  7737. }
  7738. }
  7739. lcd_update_enable(true);
  7740. lcd_update(2);
  7741. }
  7742. #endif //FARM_CONNECT_MESSAGE
  7743. void lcd_ping() { //chceck if printer is connected to monitoring when in farm mode
  7744. if (farm_mode) {
  7745. bool empty = cmd_buffer_empty();
  7746. if ((_millis() - PingTime) * 0.001 > (empty ? PING_TIME : PING_TIME_LONG)) { //if commands buffer is empty use shorter time period
  7747. //if there are comamnds in buffer, some long gcodes can delay execution of ping command
  7748. //therefore longer period is used
  7749. printer_connected = false;
  7750. }
  7751. else {
  7752. lcd_printer_connected();
  7753. }
  7754. }
  7755. }
  7756. void lcd_ignore_click(bool b)
  7757. {
  7758. ignore_click = b;
  7759. wait_for_unclick = false;
  7760. }
  7761. void lcd_finishstatus() {
  7762. SERIAL_PROTOCOLLNRPGM(MSG_LCD_STATUS_CHANGED);
  7763. int len = strlen(lcd_status_message);
  7764. if (len > 0) {
  7765. while (len < LCD_WIDTH) {
  7766. lcd_status_message[len++] = ' ';
  7767. }
  7768. }
  7769. lcd_status_message[LCD_WIDTH] = '\0';
  7770. lcd_draw_update = 2;
  7771. }
  7772. void lcd_setstatus(const char* message)
  7773. {
  7774. if (lcd_status_message_level > 0)
  7775. return;
  7776. lcd_updatestatus(message);
  7777. }
  7778. void lcd_updatestatuspgm(const char *message){
  7779. strncpy_P(lcd_status_message, message, LCD_WIDTH);
  7780. lcd_status_message[LCD_WIDTH] = 0;
  7781. lcd_finishstatus();
  7782. // hack lcd_draw_update to 1, i.e. without clear
  7783. lcd_draw_update = 1;
  7784. }
  7785. void lcd_setstatuspgm(const char* message)
  7786. {
  7787. if (lcd_status_message_level > 0)
  7788. return;
  7789. lcd_updatestatuspgm(message);
  7790. }
  7791. void lcd_updatestatus(const char *message){
  7792. strncpy(lcd_status_message, message, LCD_WIDTH);
  7793. lcd_status_message[LCD_WIDTH] = 0;
  7794. lcd_finishstatus();
  7795. // hack lcd_draw_update to 1, i.e. without clear
  7796. lcd_draw_update = 1;
  7797. }
  7798. void lcd_setalertstatuspgm(const char* message, uint8_t severity)
  7799. {
  7800. if (severity > lcd_status_message_level) {
  7801. lcd_updatestatuspgm(message);
  7802. lcd_status_message_level = severity;
  7803. lcd_return_to_status();
  7804. }
  7805. }
  7806. void lcd_setalertstatus(const char* message, uint8_t severity)
  7807. {
  7808. if (severity > lcd_status_message_level) {
  7809. lcd_updatestatus(message);
  7810. lcd_status_message_level = severity;
  7811. lcd_return_to_status();
  7812. }
  7813. }
  7814. void lcd_reset_alert_level()
  7815. {
  7816. lcd_status_message_level = 0;
  7817. }
  7818. uint8_t get_message_level()
  7819. {
  7820. return lcd_status_message_level;
  7821. }
  7822. void menu_lcd_longpress_func(void)
  7823. {
  7824. backlight_wake();
  7825. if (homing_flag || mesh_bed_leveling_flag || menu_menu == lcd_babystep_z || menu_menu == lcd_move_z)
  7826. {
  7827. // disable longpress during re-entry, while homing or calibration
  7828. lcd_quick_feedback();
  7829. return;
  7830. }
  7831. if (menu_menu == lcd_hw_setup_menu)
  7832. {
  7833. // only toggle the experimental menu visibility flag
  7834. lcd_quick_feedback();
  7835. lcd_experimental_toggle();
  7836. return;
  7837. }
  7838. // explicitely listed menus which are allowed to rise the move-z or live-adj-z functions
  7839. // The lists are not the same for both functions, so first decide which function is to be performed
  7840. if ( (moves_planned() || IS_SD_PRINTING || is_usb_printing )){ // long press as live-adj-z
  7841. if(( current_position[Z_AXIS] < Z_HEIGHT_HIDE_LIVE_ADJUST_MENU ) // only allow live-adj-z up to 2mm of print height
  7842. && ( menu_menu == lcd_status_screen // and in listed menus...
  7843. || menu_menu == lcd_main_menu
  7844. || menu_menu == lcd_tune_menu
  7845. || menu_menu == lcd_support_menu
  7846. )
  7847. ){
  7848. lcd_clear();
  7849. menu_submenu(lcd_babystep_z);
  7850. } else {
  7851. // otherwise consume the long press as normal click
  7852. if( menu_menu != lcd_status_screen )
  7853. menu_back();
  7854. }
  7855. } else { // long press as move-z
  7856. if(menu_menu == lcd_status_screen
  7857. || menu_menu == lcd_main_menu
  7858. || menu_menu == lcd_preheat_menu
  7859. || menu_menu == lcd_sdcard_menu
  7860. || menu_menu == lcd_settings_menu
  7861. || menu_menu == lcd_control_temperature_menu
  7862. #if (LANG_MODE != 0)
  7863. || menu_menu == lcd_language
  7864. #endif
  7865. || menu_menu == lcd_support_menu
  7866. ){
  7867. move_menu_scale = 1.0;
  7868. menu_submenu(lcd_move_z);
  7869. } else {
  7870. // otherwise consume the long press as normal click
  7871. if( menu_menu != lcd_status_screen )
  7872. menu_back();
  7873. }
  7874. }
  7875. }
  7876. void menu_lcd_charsetup_func(void)
  7877. {
  7878. if (menu_menu == lcd_status_screen)
  7879. lcd_set_custom_characters_degree();
  7880. else
  7881. lcd_set_custom_characters_arrows();
  7882. }
  7883. static inline bool z_menu_expired()
  7884. {
  7885. return (menu_menu == lcd_babystep_z
  7886. && lcd_timeoutToStatus.expired(LCD_TIMEOUT_TO_STATUS_BABYSTEP_Z));
  7887. }
  7888. static inline bool other_menu_expired()
  7889. {
  7890. return (menu_menu != lcd_status_screen
  7891. && menu_menu != lcd_babystep_z
  7892. && lcd_timeoutToStatus.expired(LCD_TIMEOUT_TO_STATUS));
  7893. }
  7894. static inline bool forced_menu_expire()
  7895. {
  7896. bool retval = (menu_menu != lcd_status_screen
  7897. && forceMenuExpire);
  7898. forceMenuExpire = false;
  7899. return retval;
  7900. }
  7901. void menu_lcd_lcdupdate_func(void)
  7902. {
  7903. #if (SDCARDDETECT > 0)
  7904. if ((IS_SD_INSERTED != lcd_oldcardstatus))
  7905. {
  7906. lcd_draw_update = 2;
  7907. lcd_oldcardstatus = IS_SD_INSERTED;
  7908. lcd_refresh(); // to maybe revive the LCD if static electricity killed it.
  7909. backlight_wake();
  7910. if (lcd_oldcardstatus)
  7911. {
  7912. if (!card.cardOK)
  7913. {
  7914. card.initsd(false); //delay the sorting to the sd menu. Otherwise, removing the SD card while sorting will not menu_back()
  7915. card.presort_flag = true; //force sorting of the SD menu
  7916. }
  7917. LCD_MESSAGERPGM(_T(WELCOME_MSG));
  7918. bMain=false; // flag (i.e. 'fake parameter') for 'lcd_sdcard_menu()' function
  7919. menu_submenu(lcd_sdcard_menu);
  7920. lcd_timeoutToStatus.start();
  7921. }
  7922. else
  7923. {
  7924. if(menu_menu==lcd_sdcard_menu)
  7925. menu_back();
  7926. card.release();
  7927. LCD_MESSAGERPGM(_i("Card removed"));////MSG_SD_REMOVED c=20
  7928. }
  7929. }
  7930. #endif//CARDINSERTED
  7931. backlight_update();
  7932. if (lcd_next_update_millis < _millis())
  7933. {
  7934. if (abs(lcd_encoder_diff) >= ENCODER_PULSES_PER_STEP)
  7935. {
  7936. if (lcd_draw_update == 0)
  7937. lcd_draw_update = 1;
  7938. lcd_encoder += lcd_encoder_diff / ENCODER_PULSES_PER_STEP;
  7939. Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
  7940. lcd_encoder_diff = 0;
  7941. lcd_timeoutToStatus.start();
  7942. backlight_wake();
  7943. }
  7944. if (LCD_CLICKED)
  7945. {
  7946. lcd_timeoutToStatus.start();
  7947. backlight_wake();
  7948. }
  7949. (*menu_menu)();
  7950. if (z_menu_expired() || other_menu_expired() || forced_menu_expire())
  7951. {
  7952. // Exiting a menu. Let's call the menu function the last time with menu_leaving flag set to true
  7953. // to give it a chance to save its state.
  7954. // This is useful for example, when the babystep value has to be written into EEPROM.
  7955. if (menu_menu != NULL)
  7956. {
  7957. menu_leaving = 1;
  7958. (*menu_menu)();
  7959. menu_leaving = 0;
  7960. }
  7961. lcd_clear();
  7962. lcd_return_to_status();
  7963. lcd_draw_update = 2;
  7964. }
  7965. if (lcd_draw_update == 2) lcd_clear();
  7966. if (lcd_draw_update) lcd_draw_update--;
  7967. lcd_next_update_millis = _millis() + LCD_UPDATE_INTERVAL;
  7968. }
  7969. lcd_ping(); //check that we have received ping command if we are in farm mode
  7970. lcd_send_status();
  7971. if (lcd_commands_type == LcdCommands::Layer1Cal) lcd_commands();
  7972. }
  7973. #ifdef TMC2130
  7974. //! @brief Is crash detection enabled?
  7975. //!
  7976. //! @retval true crash detection enabled
  7977. //! @retval false crash detection disabled
  7978. bool lcd_crash_detect_enabled()
  7979. {
  7980. return eeprom_read_byte((uint8_t*)EEPROM_CRASH_DET);
  7981. }
  7982. void lcd_crash_detect_enable()
  7983. {
  7984. tmc2130_sg_stop_on_crash = true;
  7985. eeprom_update_byte((uint8_t*)EEPROM_CRASH_DET, 0xFF);
  7986. }
  7987. void lcd_crash_detect_disable()
  7988. {
  7989. tmc2130_sg_stop_on_crash = false;
  7990. tmc2130_sg_crash = 0;
  7991. eeprom_update_byte((uint8_t*)EEPROM_CRASH_DET, 0x00);
  7992. }
  7993. #endif
  7994. void lcd_experimental_toggle()
  7995. {
  7996. uint8_t oldVal = eeprom_read_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY);
  7997. if (oldVal == EEPROM_EMPTY_VALUE)
  7998. oldVal = 0;
  7999. else
  8000. oldVal = !oldVal;
  8001. eeprom_update_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY, oldVal);
  8002. }
  8003. #ifdef TMC2130
  8004. void UserECool_toggle(){
  8005. // this is only called when the experimental menu is visible, thus the first condition for enabling of the ECool mode is met in this place
  8006. // The condition is intentionally inverted as we are toggling the state (i.e. if it was enabled, we are disabling the feature and vice versa)
  8007. bool enable = ! UserECoolEnabled();
  8008. eeprom_update_byte((uint8_t *)EEPROM_ECOOL_ENABLE, enable ? EEPROM_ECOOL_MAGIC_NUMBER : EEPROM_EMPTY_VALUE);
  8009. // @@TODO I don't like this - disabling the experimental menu shall disable ECool mode, but it will not reinit the TMC
  8010. // and I don't want to add more code for this experimental feature ... ideally do not reinit the TMC here at all and let the user reset the printer.
  8011. tmc2130_init(TMCInitParams(enable));
  8012. }
  8013. #endif
  8014. /// Enable experimental support for cooler operation of the extruder motor
  8015. /// Beware - REQUIRES original Prusa MK3/S/+ extruder motor with adequate maximal current
  8016. /// Therefore we don't want to allow general usage of this feature in public as the community likes to
  8017. /// change motors for various reasons and unless the motor is rotating, we cannot verify its properties
  8018. /// (which would be obviously too late for an improperly sized motor)
  8019. /// For farm printing, the cooler E-motor is enabled by default.
  8020. bool UserECoolEnabled(){
  8021. // We enable E-cool mode for non-farm prints IFF the experimental menu is visible AND the EEPROM_ECOOL variable has
  8022. // a value of the universal answer to all problems of the universe
  8023. return ( eeprom_read_byte((uint8_t *)EEPROM_ECOOL_ENABLE) == EEPROM_ECOOL_MAGIC_NUMBER )
  8024. && ( eeprom_read_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY) == 1 );
  8025. }
  8026. bool FarmOrUserECool(){
  8027. return farm_mode || UserECoolEnabled();
  8028. }
  8029. void lcd_experimental_menu()
  8030. {
  8031. MENU_BEGIN();
  8032. MENU_ITEM_BACK_P(_T(MSG_BACK));
  8033. #ifdef EXTRUDER_ALTFAN_DETECT
  8034. MENU_ITEM_TOGGLE_P(_N("ALTFAN det."), altfanOverride_get()?_T(MSG_OFF):_T(MSG_ON), altfanOverride_toggle);////MSG_MENU_ALTFAN c=18
  8035. #endif //EXTRUDER_ALTFAN_DETECT
  8036. #ifdef TMC2130
  8037. MENU_ITEM_TOGGLE_P(_N("E-cool mode"), UserECoolEnabled()?_T(MSG_ON):_T(MSG_OFF), UserECool_toggle);////MSG_MENU_ECOOL c=18
  8038. #endif
  8039. MENU_END();
  8040. }
  8041. #ifdef PINDA_TEMP_COMP
  8042. void lcd_pinda_temp_compensation_toggle()
  8043. {
  8044. uint8_t pinda_temp_compensation = eeprom_read_byte((uint8_t*)EEPROM_PINDA_TEMP_COMPENSATION);
  8045. if (pinda_temp_compensation == EEPROM_EMPTY_VALUE) // On MK2.5/S the EEPROM_EMPTY_VALUE will be set to 0 during eeprom_init.
  8046. pinda_temp_compensation = 1; // But for MK3/S it should be 1 so SuperPINDA is "active"
  8047. else
  8048. pinda_temp_compensation = !pinda_temp_compensation;
  8049. eeprom_update_byte((uint8_t*)EEPROM_PINDA_TEMP_COMPENSATION, pinda_temp_compensation);
  8050. SERIAL_ECHOLNPGM("SuperPINDA:");
  8051. SERIAL_ECHOLN(pinda_temp_compensation);
  8052. }
  8053. #endif //PINDA_TEMP_COMP