PrusaFirmware/Firmware/mmu.h

//! @file

#ifndef MMU_H
#define MMU_H

#include <inttypes.h>


extern bool mmu_enabled;
extern bool mmu_fil_loaded;

extern uint8_t mmu_extruder;

extern uint8_t tmp_extruder;

extern int8_t mmu_finda;
extern bool ir_sensor_detected;
extern bool mmu_loading_flag;

extern int16_t mmu_version;
extern int16_t mmu_buildnr;

extern uint16_t mmu_power_failures;

#define MMU_FILAMENT_UNKNOWN 255

#define MMU_NO_MOVE 0
#define MMU_UNLOAD_MOVE 1
#define MMU_LOAD_MOVE 2
#define MMU_TCODE_MOVE 3

#define MMU_LOAD_FEEDRATE 19.02f //mm/s
#define MMU_LOAD_TIME_MS 2000 //should be fine tuned to load time for shortest allowed PTFE tubing and maximum loading speed

enum MmuCmd : uint_least8_t
{
    None,
    T0,
    T1,
    T2,
    T3,
    T4,
    L0,
    L1,
    L2,
    L3,
    L4,
    C0,
    U0,
    E0,
    E1,
    E2,
    E3,
    E4,
    R0,
    S3,
};

extern int mmu_puts_P(const char* str);

extern int mmu_printf_P(const char* format, ...);

extern int8_t mmu_rx_ok(void);

extern bool check_for_ir_sensor();

extern void mmu_init(void);

extern void mmu_loop(void);


extern void mmu_reset(void);

extern int8_t mmu_set_filament_type(uint8_t extruder, uint8_t filament);

extern void mmu_command(MmuCmd cmd);

extern bool mmu_get_response(uint8_t move = 0);

extern void manage_response(bool move_axes, bool turn_off_nozzle, uint8_t move = MMU_NO_MOVE);

extern void mmu_load_to_nozzle();

extern void mmu_M600_load_filament(bool automatic);
extern void mmu_M600_wait_and_beep();

extern void extr_mov(float shift, float feed_rate);
extern void change_extr(int extr);
extern int get_ext_nr();
extern void display_loading();
extern void extr_adj(int extruder);
extern void extr_unload();
extern void extr_adj_0();
extern void extr_adj_1();
extern void extr_adj_2();
extern void extr_adj_3();
extern void extr_adj_4();
extern void mmu_load_to_nozzle_0();
extern void mmu_load_to_nozzle_1();
extern void mmu_load_to_nozzle_2();
extern void mmu_load_to_nozzle_3();
extern void mmu_load_to_nozzle_4();
extern void load_all();
extern void extr_change_0();
extern void extr_change_1();
extern void extr_change_2();
extern void extr_change_3();
#ifdef SNMM
extern void extr_unload_all();
extern void extr_unload_used();
#endif //SNMM
extern void extr_unload_0();
extern void extr_unload_1();
extern void extr_unload_2();
extern void extr_unload_3();
extern void extr_unload_4();

extern bool mmu_check_version();
extern void mmu_show_warning();
extern void lcd_mmu_load_to_nozzle(uint8_t filament_nr);
extern void mmu_eject_filament(uint8_t filament, bool recover);
extern void mmu_eject_fil_0();
extern void mmu_eject_fil_1();
extern void mmu_eject_fil_2();
extern void mmu_eject_fil_3();
extern void mmu_eject_fil_4();
extern void mmu_continue_loading();
extern void mmu_filament_ramming();
extern void mmu_wait_for_heater_blocking();
extern void mmu_load_step(bool synchronize = true);

#endif //MMU_H