language_es.h 18 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307
  1. /**
  2. * Spanish
  3. *
  4. * LCD Menu Messages
  5. * Please note these are limited to 17 characters!
  6. *
  7. */
  8. #define WELCOME_MSG CUSTOM_MENDEL_NAME " prep."
  9. #define MSG_SD_INSERTED "Tarjeta insertada"
  10. #define MSG_SD_REMOVED "Tarjeta retirada"
  11. #define MSG_MAIN "Menu principal"
  12. #define MSG_DISABLE_STEPPERS "Apagar motores"
  13. #define MSG_AUTO_HOME "Llevar al origen"
  14. #define MSG_COOLDOWN "Enfriar"
  15. #define MSG_MOVE_AXIS "Mover ejes"
  16. #define MSG_MOVE_X "Mover X"
  17. #define MSG_MOVE_Y "Mover Y"
  18. #define MSG_MOVE_Z "Mover Z"
  19. #define MSG_MOVE_E "Extruir"
  20. #define MSG_SPEED "Velocidad"
  21. #define MSG_NOZZLE "Boquilla"
  22. #define MSG_BED "Base"
  23. #define MSG_FAN_SPEED "Velocidad Vent."
  24. #define MSG_FLOW "Flujo"
  25. #define MSG_TEMPERATURE "Temperatura"
  26. #define MSG_WATCH "Monitorizar"
  27. #define MSG_TUNE "Ajustar"
  28. #define MSG_PAUSE_PRINT "Pausar impresion"
  29. #define MSG_RESUME_PRINT "Reanudar impres."
  30. #define MSG_STOP_PRINT "Detener impresion"
  31. #define MSG_CARD_MENU "Menu tarjeta SD"
  32. #define MSG_NO_CARD "No hay tarjeta SD"
  33. #define MSG_DWELL "En espera"
  34. #define MSG_USERWAIT "Esperando ordenes"
  35. #define MSG_RESUMING "Resumiendo impresion"
  36. #define MSG_PRINT_ABORTED "Impresion cancelada"
  37. #define MSG_NO_MOVE "Sin movimiento"
  38. #define MSG_KILLED "PARADA DE EMERGENCIA"
  39. #define MSG_STOPPED "PARADA"
  40. #define MSG_FILAMENTCHANGE "Cambiar filamento"
  41. #define MSG_BABYSTEP_Z "Micropaso Eje Z"
  42. #define MSG_ADJUSTZ "Ajustar Eje Z"
  43. #define MSG_PICK_Z "Esc. Modelo Adecuado"
  44. #define MSG_SETTINGS "Configuracion"
  45. #define MSG_PREHEAT "Precalentar"
  46. #define MSG_UNLOAD_FILAMENT "Soltar filamento"
  47. #define MSG_LOAD_FILAMENT "Introducir filam."
  48. #define MSG_ERROR "ERROR:"
  49. #define MSG_PREHEAT_NOZZLE "Precalentar extrusor"
  50. #define MSG_SUPPORT "Soporte"
  51. #define MSG_CORRECTLY "Cambiado correct.?"
  52. #define MSG_YES "Si"
  53. #define MSG_NO "No"
  54. #define MSG_NOT_LOADED "Fil. no introducido"
  55. #define MSG_NOT_COLOR "Color no homogeneo"
  56. #define MSG_LOADING_FILAMENT "Introduciendo filam."
  57. #define MSG_PLEASE_WAIT "Por Favor Esperar"
  58. #define MSG_LOADING_COLOR "Cambiando color"
  59. #define MSG_CHANGE_SUCCESS "Cambio correcto"
  60. #define MSG_PRESS "Pulsar el mando"
  61. #define MSG_INSERT_FILAMENT "Introducir filamento"
  62. #define MSG_CHANGING_FILAMENT "Cambiando filamento"
  63. #define MSG_SILENT_MODE_ON "Modo [silencio]"
  64. #define MSG_SILENT_MODE_OFF "Modo [rend.pleno]"
  65. #define MSG_REBOOT "Reiniciar impresora"
  66. #define MSG_TAKE_EFFECT " para aplicar cambios"
  67. #define MSG_HEATING "Calentando..."
  68. #define MSG_HEATING_COMPLETE "Calentamiento final."
  69. #define MSG_BED_HEATING "Calentando Base"
  70. #define MSG_BED_DONE "Base preparada"
  71. #define MSG_LANGUAGE_NAME "Espanol"
  72. #define MSG_LANGUAGE_SELECT "Cambiae el idioma"
  73. #define MSG_PRUSA3D "prusa3d.com"
  74. #define MSG_PRUSA3D_FORUM "forum.prusa3d.com"
  75. #define MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
  76. // Do not translate those!
  77. #define MSG_Enqueing "enqueing \""
  78. #define MSG_POWERUP "PowerUp"
  79. #define MSG_CONFIGURATION_VER " Last Updated: "
  80. #define MSG_FREE_MEMORY " Free Memory: "
  81. #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
  82. #define MSG_OK "ok"
  83. #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
  84. #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
  85. #define MSG_BEGIN_FILE_LIST "Begin file list"
  86. #define MSG_END_FILE_LIST "End file list"
  87. #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
  88. #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
  89. #define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
  90. #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
  91. #define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
  92. #define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
  93. #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
  94. #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
  95. #define MSG_ERR_KILLED "Printer halted. kill() called!"
  96. #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
  97. #define MSG_RESEND "Resend: "
  98. #define MSG_M119_REPORT "Reporting endstop status"
  99. #define MSG_ENDSTOP_HIT "TRIGGERED"
  100. #define MSG_ENDSTOP_OPEN "open"
  101. #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
  102. #define MSG_SD_INIT_FAIL "SD init fail"
  103. #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
  104. #define MSG_SD_OPENROOT_FAIL "openRoot failed"
  105. #define MSG_SD_CARD_OK "SD card ok"
  106. #define MSG_SD_WORKDIR_FAIL "workDir open failed"
  107. #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
  108. #define MSG_SD_FILE_OPENED "File opened: "
  109. #define MSG_SD_FILE_SELECTED "File selected"
  110. #define MSG_SD_WRITE_TO_FILE "Writing to file: "
  111. #define MSG_SD_PRINTING_BYTE "SD printing byte "
  112. #define MSG_SD_NOT_PRINTING "Not SD printing"
  113. #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
  114. #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
  115. #define MSG_STEPPER_TOO_HIGH "Steprate too high: "
  116. #define MSG_ENDSTOPS_HIT "endstops hit: "
  117. #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
  118. #define MSG_BABYSTEPPING_X "Babystepping X"
  119. #define MSG_BABYSTEPPING_Y "Babystepping Y"
  120. #define MSG_BABYSTEPPING_Z "Adjusting Z"
  121. #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
  122. #define MSG_SET_HOME_OFFSETS "Set home offsets"
  123. #define MSG_SET_ORIGIN "Set origin"
  124. #define MSG_SWITCH_PS_ON "Switch power on"
  125. #define MSG_SWITCH_PS_OFF "Switch power off"
  126. #define MSG_NOZZLE1 "Nozzle2"
  127. #define MSG_NOZZLE2 "Nozzle3"
  128. #define MSG_FLOW0 "Flow 0"
  129. #define MSG_FLOW1 "Flow 1"
  130. #define MSG_FLOW2 "Flow 2"
  131. #define MSG_CONTROL "Control"
  132. #define MSG_MIN " \002 Min"
  133. #define MSG_MAX " \002 Max"
  134. #define MSG_FACTOR " \002 Fact"
  135. #define MSG_MOTION "Motion"
  136. #define MSG_VOLUMETRIC "Filament"
  137. #define MSG_VOLUMETRIC_ENABLED "E in mm3"
  138. #define MSG_STORE_EPROM "Store memory"
  139. #define MSG_LOAD_EPROM "Load memory"
  140. #define MSG_RESTORE_FAILSAFE "Restore failsafe"
  141. #define MSG_REFRESH "\xF8" "Refresh"
  142. #define MSG_INIT_SDCARD "Init. SD card"
  143. #define MSG_CNG_SDCARD "Change SD card"
  144. #define MSG_BABYSTEP_X "Babystep X"
  145. #define MSG_BABYSTEP_Y "Babystep Y"
  146. #define MSG_RECTRACT "Rectract"
  147. #define MSG_HOMEYZ "Calibrar Z"
  148. #define MSG_HOMEYZ_PROGRESS "Calibrando Z"
  149. #define MSG_HOMEYZ_DONE "Calibracion OK"
  150. #define MSG_SELFTEST_ERROR "Autotest error!"
  151. #define MSG_SELFTEST_PLEASECHECK "Controla :"
  152. #define MSG_SELFTEST_NOTCONNECTED "No hay conexion "
  153. #define MSG_SELFTEST_HEATERTHERMISTOR "Calent./Termistor"
  154. #define MSG_SELFTEST_BEDHEATER "Cama/Calentador"
  155. #define MSG_SELFTEST_WIRINGERROR "Error de conexion"
  156. #define MSG_SELFTEST_ENDSTOPS "Topes final"
  157. #define MSG_SELFTEST_MOTOR "Motor"
  158. #define MSG_SELFTEST_ENDSTOP "Tope final"
  159. #define MSG_SELFTEST_ENDSTOP_NOTHIT "Tope fin. no toc."
  160. #define MSG_SELFTEST_OK "Self test OK"
  161. #define(length=20) MSG_SELFTEST_FAN "Test del ventilador";
  162. #define(length=20) MSG_SELFTEST_COOLING_FAN "Vent. al frente?";
  163. #define(length=20) MSG_SELFTEST_EXTRUDER_FAN "Vent. en la izg?";
  164. #define MSG_SELFTEST_FAN_YES "Ventilador gira";
  165. #define MSG_SELFTEST_FAN_NO "Ventilador no gira";
  166. #define MSG_STATS_TOTALFILAMENT "Filamento total:"
  167. #define MSG_STATS_TOTALPRINTTIME "Tiempo total :"
  168. #define MSG_STATS_FILAMENTUSED "Filamento : "
  169. #define MSG_STATS_PRINTTIME "Tiempo de imp.:"
  170. #define MSG_SELFTEST_START "Autotest salida"
  171. #define MSG_SELFTEST_CHECK_ENDSTOPS "Cont. topes final"
  172. #define MSG_SELFTEST_CHECK_HOTEND "Control hotend "
  173. #define MSG_SELFTEST_CHECK_X "Control del eje X"
  174. #define MSG_SELFTEST_CHECK_Y "Control del eje Y"
  175. #define MSG_SELFTEST_CHECK_Z "Control del eje Z"
  176. #define MSG_SELFTEST_CHECK_BED "Control de cama"
  177. #define MSG_SELFTEST_CHECK_ALLCORRECT "Todo bie "
  178. #define MSG_SELFTEST "Autotest"
  179. #define MSG_SELFTEST_FAILED "Autotest fallado"
  180. #define MSG_STATISTICS "Estadistica "
  181. #define MSG_USB_PRINTING "Impresion de USB "
  182. #define MSG_SHOW_END_STOPS "Ensena tope final"
  183. #define MSG_CALIBRATE_BED "Calibra XYZ"
  184. #define MSG_CALIBRATE_BED_RESET "Reset XYZ calibr."
  185. #define MSG_MOVE_CARRIAGE_TO_THE_TOP "Calibrando XYZ. Gira el boton para subir el carro Z hasta golpe piezas superioras. Despues haz clic."
  186. #define MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Calibrando Z. Gira el boton para subir el carro Z hasta golpe piezas superioras. Despues haz clic."
  187. #define MSG_CONFIRM_NOZZLE_CLEAN "Limpiar boquilla para calibracion. Click cuando acabes."
  188. #define MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Carros Z izq./der. estan arriba maximo?"
  189. #define MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Buscando cama punto de calibracion"
  190. #define MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " de 4"
  191. #define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Mejorando cama punto de calibracion"
  192. #define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " de 9"
  193. #define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Medir la altura del punto de la calibracion"
  194. #define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " de 9"
  195. #define MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Reiteracion "
  196. #define MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Calibracion XYZ fallada. Puntos de calibracion en la cama no encontrados."
  197. #define MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Calibracion XYZ fallada. Consultar el manual por favor."
  198. #define MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "Calibracion XYZ ok. Ejes X/Y perpendiculares. Felicitaciones!"
  199. #define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "Calibracion XYZ correcta. Los ejes X / Y estan ligeramente inclinados. Buen trabajo!"
  200. #define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "Calibracion XYZ correcta. La inclinacion se corregira automaticamente."
  201. #define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "Calibracion XYZ fallad. Punto delantero izquierdo no alcanzable."
  202. #define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "Calibracion XYZ fallad. Punto delantero derecho no alcanzable."
  203. #define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "Calibracion XYZ fallad. Punto delanteros no alcanzables."
  204. #define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "Calibrazion XYZ comprometida. Punto delantero izquierdo no alcanzable."
  205. #define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "Calibrazion XYZ comprometida. Punto delantero derecho no alcanzable."
  206. #define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "Calibrazion XYZ comprometida. Punto delanteros no alcanzables."
  207. #define MSG_BED_LEVELING_FAILED_POINT_LOW "Nivelacion fallada. Sensor no funciona. Escombros en Boqui.? Esperando reset."
  208. #define MSG_BED_LEVELING_FAILED_POINT_HIGH "Nivelacion fallada. Sensor funciona demasiado temprano. Esperando reset."
  209. #define MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Nivelacion fallada. Sensor desconectado o cables danados. Esperando reset."
  210. #define MSG_NEW_FIRMWARE_AVAILABLE "Nuevo firmware disponible:"
  211. #define MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Actualizar por favor"
  212. #define MSG_FOLLOW_CALIBRATION_FLOW "Impresora no esta calibrada todavia. Por favor usar el manual, el capitulo First steps, seleccion Calibration flow."
  213. #define MSG_BABYSTEP_Z_NOT_SET "Distancia entre la punta de la boquilla y la superficie de la cama no fijada aun. Por favor siga el manual, capitulo First steps, seccion First layer calibration."
  214. #define MSG_BED_CORRECTION_MENU "Corr. de la cama"
  215. #define MSG_BED_CORRECTION_LEFT "Izquierda [um]"
  216. #define MSG_BED_CORRECTION_RIGHT "Derecha [um]"
  217. #define MSG_BED_CORRECTION_FRONT "Adelante [um]"
  218. #define MSG_BED_CORRECTION_REAR "Atras [um]"
  219. #define MSG_BED_CORRECTION_RESET "Reset"
  220. #define MSG_MESH_BED_LEVELING "Mesh Bed Leveling"
  221. #define MSG_MENU_CALIBRATION "Calibracion"
  222. #define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD card [normal]"
  223. #define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]"
  224. #define MSG_LOOSE_PULLEY "Polea suelta"
  225. #define MSG_FILAMENT_LOADING_T0 "Insertar filamento en el extrusor 1. Haga clic una vez terminado."
  226. #define MSG_FILAMENT_LOADING_T1 "Insertar filamento en el extrusor 2. Haga clic una vez terminado."
  227. #define MSG_FILAMENT_LOADING_T2 "Insertar filamento en el extrusor 3. Haga clic una vez terminado."
  228. #define MSG_FILAMENT_LOADING_T3 "Insertar filamento en el extrusor 4. Haga clic una vez terminado."
  229. #define MSG_CHANGE_EXTR "Cambiar extrusor."
  230. #define MSG_FIL_ADJUSTING "Ajustando filamentos. Esperar por favor."
  231. #define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filamentos ajustados. Limpie la boquilla para calibracion. Haga clic una vez terminado."
  232. #define MSG_CALIBRATE_E "Calibrar E"
  233. #define MSG_E_CAL_KNOB "Rotar el mando hasta que la marca llegue al cuerpo del extrusor. Haga clic una vez terminado."
  234. #define MSG_MARK_FIL "Marque el filamento 100 mm por encima del final del extrusor. Hacer clic una vez terminado."
  235. #define MSG_CLEAN_NOZZLE_E "E calibrado. Limpiar la boquilla. Haga clic una vez terminado."
  236. #define MSG_WAITING_TEMP "Esperando enfriamiento de la cama y del extrusor."
  237. #define MSG_FILAMENT_CLEAN "Es el nuevo color nitido?"
  238. #define MSG_UNLOADING_FILAMENT "Soltando filamento"
  239. #define MSG_PAPER "Colocar una hoja de papel sobre la superficie de impresion durante la calibracion de los primeros 4 puntos. Si la boquilla mueve el papel, apagar impresora inmediatamente."
  240. #define MSG_FINISHING_MOVEMENTS "Term. movimientos"
  241. #define MSG_PRINT_PAUSED "Impresion en pausa"
  242. #define MSG_RESUMING_PRINT "Reanudar impresion"
  243. #define MSG_PID_EXTRUDER "Calibracion PID"
  244. #define MSG_SET_TEMPERATURE "Establecer temp.:"
  245. #define MSG_PID_FINISHED "Cal. PID terminada"
  246. #define MSG_PID_RUNNING "Cal. PID "
  247. #define MSG_CALIBRATE_PINDA "Calibrar"
  248. #define MSG_CALIBRATION_PINDA_MENU "Calibracion temp."
  249. #define MSG_PINDA_NOT_CALIBRATED "La temperatura de calibracion no ha sido ajustada"
  250. #define MSG_PINDA_PREHEAT "Calentando PINDA"
  251. #define MSG_TEMP_CALIBRATION "Cal. temp. "
  252. #define MSG_TEMP_CALIBRATION_DONE "Calibracon temperatura terminada. Presionar para continuar."
  253. #define MSG_TEMP_CALIBRATION_ON "Cal. temp. [ON]"
  254. #define MSG_TEMP_CALIBRATION_OFF "Cal. temp. [OFF]"
  255. #define MSG_PREPARE_FILAMENT "Preparar filamento"
  256. #define MSG_LOAD_ALL "Intr. todos fil."
  257. #define MSG_LOAD_FILAMENT_1 "Introducir fil. 1"
  258. #define MSG_LOAD_FILAMENT_2 "Introducir fil. 2"
  259. #define MSG_LOAD_FILAMENT_3 "Introducir fil. 3"
  260. #define MSG_LOAD_FILAMENT_4 "Introducir fil. 4"
  261. #define MSG_UNLOAD_FILAMENT_1 "Soltar fil. 1"
  262. #define MSG_UNLOAD_FILAMENT_2 "Soltar fil. 2"
  263. #define MSG_UNLOAD_FILAMENT_3 "Soltar fil. 3"
  264. #define MSG_UNLOAD_FILAMENT_4 "Soltar fil. 4"
  265. #define MSG_UNLOAD_ALL "Soltar todos fil."
  266. #define MSG_PREPARE_FILAMENT "Preparar filamento"
  267. #define MSG_ALL "Todos"
  268. #define MSG_USED "Usado en impresion"
  269. #define MSG_CURRENT "Actual"
  270. #define MSG_CHOOSE_EXTRUDER "Elegir extrusor:"
  271. #define MSG_EXTRUDER "Extrusor"
  272. #define MSG_EXTRUDER_1 "Extrusor 1"
  273. #define MSG_EXTRUDER_2 "Extrusor 2"
  274. #define MSG_EXTRUDER_3 "Extrusor 3"
  275. #define MSG_EXTRUDER_4 "Extrusor 4"
  276. #define MSG_DATE "Fecha:"
  277. #define MSG_XYZ_DETAILS "Inform. XYZ cal."
  278. #define MSG_Y_DISTANCE_FROM_MIN "Dist. Y desde min:"
  279. #define MSG_LEFT "Izquierda:"
  280. #define MSG_CENTER "Centro:"
  281. #define MSG_RIGHT "Derecha:"
  282. #define MSG_MEASURED_SKEW "Inclin. medida:"
  283. #define MSG_SLIGHT_SKEW "Inclin. ligera:"
  284. #define MSG_SEVERE_SKEW "Inclin. severa:"