language_pl.h 14 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235
  1. /**
  2. * Polish
  3. *
  4. * LCD Menu Messages
  5. * Please note these are limited to 17 characters!
  6. *
  7. */
  8. #define WELCOME_MSG CUSTOM_MENDEL_NAME " gotowa"
  9. #define MSG_SD_INSERTED "Karta wlozona"
  10. #define MSG_SD_REMOVED "Karta wyjeta"
  11. #define MSG_MAIN "Menu glowne"
  12. #define MSG_DISABLE_STEPPERS "Wylaczyc silniki"
  13. #define MSG_AUTO_HOME "Auto home"
  14. #define MSG_COOLDOWN "Wychlodzic"
  15. #define MSG_MOVE_AXIS "Ruch osi"
  16. #define MSG_MOVE_X "Przesunac X"
  17. #define MSG_MOVE_Y "Przesunac Y"
  18. #define MSG_MOVE_Z "Przesunac Z"
  19. #define MSG_MOVE_E "Extruder"
  20. #define MSG_SPEED "Predkosc"
  21. #define MSG_NOZZLE "Dysza"
  22. #define MSG_BED "Stolik"
  23. #define MSG_FAN_SPEED "Predkosc went."
  24. #define MSG_FLOW "Przeplyw"
  25. #define MSG_TEMPERATURE "Temperatura"
  26. #define MSG_WATCH "Informacje"
  27. #define MSG_TUNE "Nastroic"
  28. #define MSG_PAUSE_PRINT "Przerwac druk"
  29. #define MSG_RESUME_PRINT "Kontynuowac"
  30. #define MSG_STOP_PRINT "Zatrzymac druk"
  31. #define MSG_CARD_MENU "Druk z SD"
  32. #define MSG_NO_CARD "Brak karty SD"
  33. #define MSG_DWELL "Sleep..."
  34. #define MSG_USERWAIT "Wait for user..."
  35. #define MSG_RESUMING "Wznowienie druku"
  36. #define MSG_PRINT_ABORTED "Druk przerwany"
  37. #define MSG_NO_MOVE "No move."
  38. #define MSG_KILLED "KILLED. "
  39. #define MSG_STOPPED "STOPPED. "
  40. #define MSG_FILAMENTCHANGE "Wymienic filament"
  41. #define MSG_BABYSTEP_Z "Dostrojenie osy Z"
  42. #define MSG_ADJUSTZ "Autodostroic Z?"
  43. #define MSG_PICK_Z "Vyberte vytisk"
  44. #define MSG_SETTINGS "Ustawienia"
  45. #define MSG_PREHEAT "Grzanie"
  46. #define MSG_UNLOAD_FILAMENT "Wyjac filament"
  47. #define MSG_LOAD_FILAMENT "Wprowadz filament"
  48. #define MSG_ERROR "BLAD:"
  49. #define MSG_PREHEAT_NOZZLE "Nagrzej dysze!"
  50. #define MSG_SUPPORT "Pomoc"
  51. #define MSG_CORRECTLY "Wymiana ok?"
  52. #define MSG_YES "Tak"
  53. #define MSG_NO "Nie"
  54. #define MSG_NOT_LOADED "Brak filamentu"
  55. #define MSG_NOT_COLOR "Kolor zanieczysz."
  56. #define MSG_LOADING_FILAMENT "Wprow. filamentu"
  57. #define MSG_PLEASE_WAIT "Prosze czekac"
  58. #define MSG_LOADING_COLOR "Czyszcz. koloru"
  59. #define MSG_CHANGE_SUCCESS "Wymiana ok!"
  60. #define MSG_PRESS "Nacisnij przycisk"
  61. #define MSG_INSERT_FILAMENT "Wprowadz filament"
  62. #define MSG_CHANGING_FILAMENT "Wymiana filamentu"
  63. #define MSG_SILENT_MODE_ON "Mod [cichy]"
  64. #define MSG_SILENT_MODE_OFF "Mod [w wydajnosc]"
  65. #define MSG_REBOOT "Restart drukarki"
  66. #define MSG_TAKE_EFFECT "wprow. zmian"
  67. #define MSG_HEATING "Grzanie..."
  68. #define MSG_HEATING_COMPLETE "Grzanie OK."
  69. #define MSG_BED_HEATING "Grzanie stolika.."
  70. #define MSG_BED_DONE "Stolik OK."
  71. #define MSG_LANGUAGE_NAME "Polski"
  72. #define MSG_LANGUAGE_SELECT "Wybor jezyka"
  73. #define MSG_PRUSA3D "prusa3d.cz"
  74. #define MSG_PRUSA3D_FORUM "forum.prusa3d.cz"
  75. #define MSG_PRUSA3D_HOWTO "howto.prusa3d.cz"
  76. // Do not translate those!
  77. #define MSG_Enqueing "enqueing \""
  78. #define MSG_POWERUP "PowerUp"
  79. #define MSG_CONFIGURATION_VER " Last Updated: "
  80. #define MSG_FREE_MEMORY " Free Memory: "
  81. #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
  82. #define MSG_OK "ok"
  83. #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
  84. #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
  85. #define MSG_BEGIN_FILE_LIST "Begin file list"
  86. #define MSG_END_FILE_LIST "End file list"
  87. #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
  88. #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
  89. #define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
  90. #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
  91. #define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
  92. #define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
  93. #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
  94. #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
  95. #define MSG_ERR_KILLED "Printer halted. kill() called!"
  96. #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
  97. #define MSG_RESEND "Resend: "
  98. #define MSG_M119_REPORT "Reporting endstop status"
  99. #define MSG_ENDSTOP_HIT "TRIGGERED"
  100. #define MSG_ENDSTOP_OPEN "open"
  101. #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
  102. #define MSG_SD_INIT_FAIL "SD init fail"
  103. #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
  104. #define MSG_SD_OPENROOT_FAIL "openRoot failed"
  105. #define MSG_SD_CARD_OK "SD card ok"
  106. #define MSG_SD_WORKDIR_FAIL "workDir open failed"
  107. #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
  108. #define MSG_SD_FILE_OPENED "File opened: "
  109. #define MSG_SD_FILE_SELECTED "File selected"
  110. #define MSG_SD_WRITE_TO_FILE "Writing to file: "
  111. #define MSG_SD_PRINTING_BYTE "SD printing byte "
  112. #define MSG_SD_NOT_PRINTING "Not SD printing"
  113. #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
  114. #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
  115. #define MSG_STEPPER_TOO_HIGH "Steprate too high: "
  116. #define MSG_ENDSTOPS_HIT "endstops hit: "
  117. #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
  118. #define MSG_BABYSTEPPING_X "Babystepping X"
  119. #define MSG_BABYSTEPPING_Y "Babystepping Y"
  120. #define MSG_BABYSTEPPING_Z "Dostavovani Z"
  121. #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
  122. #define MSG_SET_HOME_OFFSETS "Nastav pocatek home"
  123. #define MSG_SET_ORIGIN "Nastav pocatek"
  124. #define MSG_SWITCH_PS_ON "Vypnout zdroj"
  125. #define MSG_SWITCH_PS_OFF "Zapnout zdroj"
  126. #define MSG_NOZZLE1 "Tryska2"
  127. #define MSG_NOZZLE2 "Tryska3"
  128. #define MSG_FLOW0 "Prutok 0"
  129. #define MSG_FLOW1 "Prutok 1"
  130. #define MSG_FLOW2 "Prutok 2"
  131. #define MSG_CONTROL "Kontrola"
  132. #define MSG_MIN " \002 Min"
  133. #define MSG_MAX " \002 Max"
  134. #define MSG_FACTOR " \002 Fact"
  135. #define MSG_MOTION "Pohyb"
  136. #define MSG_VOLUMETRIC "Filament"
  137. #define MSG_VOLUMETRIC_ENABLED "E in mm3"
  138. #define MSG_STORE_EPROM "Store memory"
  139. #define MSG_LOAD_EPROM "Ulozit pamet"
  140. #define MSG_RESTORE_FAILSAFE "Obnovit vychozi"
  141. #define MSG_REFRESH "\xF8" "Obnovit"
  142. #define MSG_INIT_SDCARD "Inic. SD"
  143. #define MSG_CNG_SDCARD "Vymenit SD"
  144. #define MSG_BABYSTEP_X "Babystep X"
  145. #define MSG_BABYSTEP_Y "Babystep Y"
  146. #define MSG_RECTRACT "Rectract"
  147. #define MSG_HOMEYZ "Kalibruj Z"
  148. #define MSG_HOMEYZ_PROGRESS "Kalibruje Z"
  149. #define MSG_HOMEYZ_DONE "Kalibracja OK"
  150. #define MSG_SELFTEST_ERROR "Selftest error !"
  151. #define MSG_SELFTEST_PLEASECHECK "Skontroluj :"
  152. #define MSG_SELFTEST_NOTCONNECTED "Nie podlaczono "
  153. #define MSG_SELFTEST_HEATERTHERMISTOR "Heater/Thermistor"
  154. #define MSG_SELFTEST_BEDHEATER "Bed / Heater"
  155. #define MSG_SELFTEST_WIRINGERROR "Blad polaczenia"
  156. #define MSG_SELFTEST_ENDSTOPS "Endstops"
  157. #define MSG_SELFTEST_MOTOR "Silnik"
  158. #define MSG_SELFTEST_ENDSTOP "Endstop"
  159. #define MSG_SELFTEST_ENDSTOP_NOTHIT "Endstop not hit"
  160. #define MSG_SELFTEST_OK "Self test OK"
  161. #define MSG_STATS_TOTALFILAMENT "Filament lacznie :"
  162. #define MSG_STATS_TOTALPRINTTIME "Czas calkowity :"
  163. #define MSG_STATS_FILAMENTUSED "Filament : "
  164. #define MSG_STATS_PRINTTIME "Czas druku : "
  165. #define MSG_SELFTEST_START "Self test start "
  166. #define MSG_SELFTEST_CHECK_ENDSTOPS "Kontrola endstops"
  167. #define MSG_SELFTEST_CHECK_HOTEND "Kontrola hotend "
  168. #define MSG_SELFTEST_CHECK_X "Kontrola X axis "
  169. #define MSG_SELFTEST_CHECK_Y "Kontrola Y axis "
  170. #define MSG_SELFTEST_CHECK_Z "Kontrola Z axis "
  171. #define MSG_SELFTEST_CHECK_BED "Kontrola bed "
  172. #define MSG_SELFTEST_CHECK_ALLCORRECT "Wszystko OK "
  173. #define MSG_SELFTEST "Selftest "
  174. #define MSG_SELFTEST_FAILED "Selftest nieudany"
  175. #define MSG_STATISTICS "Statystyka "
  176. #define MSG_USB_PRINTING "Druk z USB "
  177. #define MSG_SHOW_END_STOPS "Pokaz krancowki"
  178. #define MSG_CALIBRATE_BED "Kalibracja XYZ"
  179. #define MSG_CALIBRATE_BED_RESET "Reset kalibr. XYZ"
  180. #define MSG_MOVE_CARRIAGE_TO_THE_TOP "Kalibracja XYZ. Przekrec galke, aby przesunac os Z do gornych krancowek. Nacisnij, by potwierdzic."
  181. #define MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Kalibracja Z. Przekrec galke, aby przesunac os Z do gornych krancowek. Nacisnij, by potwierdzic."
  182. #define MSG_CONFIRM_NOZZLE_CLEAN "Dla prawidl. kalibracji prosze oczyscic dysze. Potw. guzikiem."
  183. #define MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Oba wozki dojechaly do gornej ramy?"
  184. #define MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Szukam punktu kalibracyjnego podkladki"
  185. #define MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " z 4"
  186. #define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Poprawiam precyzyjnosc punktu kalibracyjnego"
  187. #define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " z 9"
  188. #define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Okreslam wysokosc odniesienia punktu kalibracyjnego"
  189. #define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " z 9"
  190. #define MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Kalibr. XYZ nieudana. Kalibracyjny punkt podkladki nieznaleziony."
  191. #define MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Kalibracja XYZ niepowiedziona. Sprawdzic w instrukcji."
  192. #define MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "Kalibracja XYZ ok. Osie X/Y sa prostopadle."
  193. #define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "Kalibracja XYZ w porzadku. Osie X/Y lekko skosne."
  194. #define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "Osie X/Y sa mocno skosne. Skos bedzie aut. wyrownany przy druku."
  195. #define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "Kalibr. XYZ nieudana. Lewy przedni punkt zbyt do przodu. Wyrownac drukarke."
  196. #define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "Kalibr. XYZ nieudana. Prawy przedni punkt zbyt do przodu. Wyrownac drukarke."
  197. #define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "Kalibr. XYZ nieudana. Przed. punkty kalibr. zbyt do przodu. Wyrownac drukarke."
  198. #define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "Kalibracja XYZ niedokladna. Lewy przedni punkt zbyt wysuniety do przodu."
  199. #define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "Kalibracja XYZ niedokladna. Prawy przedni punkt zbyt wysuniety do przodu."
  200. #define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "Kalibr. XYZ niedokladna. Przednie punkty kalibr. Zbyt wys. do przodu."
  201. #define MSG_BED_LEVELING_FAILED_POINT_LOW "Kalibracja nieudana. Sensor nie dotknal. Zanieczysz. dysza? Czekam na reset."
  202. #define MSG_BED_LEVELING_FAILED_POINT_HIGH "Kalibracja Z nieudana. Sensor dotk. za wysoko. Czekam na reset."
  203. #define MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Kalibracja nieudana. Sensor odlaczony lub uszkodz. kabel. Czekam na reset."
  204. #define MSG_NEW_FIRMWARE_AVAILABLE "Wyszla nowa wersja firmware:"
  205. #define MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Prosze zaktualizowac"
  206. #define MSG_BABYSTEP_Z_NOT_SET "Drukarka nie zostala jeszcze skalibrowana. Prosze kierowac sie instrukcja, rozdzial Zaczynamy, podrozdzial Selftest."
  207. #define MSG_BED_CORRECTION_MENU "Korekta podkladki"
  208. #define MSG_BED_CORRECTION_LEFT "W lewo [um]"
  209. #define MSG_BED_CORRECTION_RIGHT "W prawo [um]"
  210. #define MSG_BED_CORRECTION_FRONT "Do przodu [um]"
  211. #define MSG_BED_CORRECTION_REAR "Do tylu [um]"
  212. #define MSG_BED_CORRECTION_RESET "Reset"
  213. #define MSG_MENU_CALIBRATION "Kalibracja"
  214. #define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "karta SD [normal]"
  215. #define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "karta SD[FlshAir]"