language_all.cpp 97 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882188318841885188618871888188918901891189218931894189518961897189818991900190119021903190419051906190719081909191019111912191319141915191619171918191919201921192219231924192519261927192819291930193119321933193419351936193719381939194019411942194319441945194619471948194919501951195219531954195519561957195819591960196119621963196419651966196719681969197019711972197319741975197619771978197919801981198219831984198519861987198819891990199119921993199419951996199719981999200020012002200320042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026202720282029203020312032203320342035203620372038203920402041204220432044204520462047204820492050205120522053205420552056205720582059206020612062206320642065206620672068206920702071207220732074207520762077207820792080208120822083208420852086208720882089209020912092209320942095209620972098209921002101210221032104210521062107210821092110211121122113211421152116211721182119212021212122212321242125212621272128212921302131213221332134213521362137213821392140214121422143214421452146214721482149215021512152215321542155215621572158215921602161216221632164216521662167216821692170217121722173217421752176217721782179218021812182218321842185218621872188218921902191219221932194219521962197219821992200220122022203220422052206220722082209221022112212221322142215221622172218221922202221222222232224222522262227222822292230223122322233223422352236223722382239224022412242224322442245224622472248224922502251225222532254225522562257225822592260226122622263226422652266226722682269227022712272227322742275227622772278227922802281228222832284228522862287228822892290229122922293229422952296229722982299230023012302230323042305230623072308230923102311231223132314231523162317231823192320232123222323232423252326232723282329233023312332233323342335233623372338233923402341234223432344234523462347234823492350235123522353235423552356235723582359236023612362236323642365236623672368236923702371237223732374237523762377237823792380238123822383238423852386238723882389239023912392239323942395239623972398239924002401240224032404240524062407240824092410241124122413241424152416241724182419242024212422242324242425242624272428242924302431243224332434243524362437243824392440244124422443244424452446244724482449245024512452245324542455245624572458245924602461246224632464246524662467246824692470247124722473247424752476247724782479248024812482248324842485248624872488248924902491249224932494249524962497249824992500250125022503250425052506250725082509251025112512251325142515251625172518251925202521252225232524252525262527252825292530253125322533253425352536253725382539254025412542254325442545254625472548254925502551255225532554255525562557255825592560256125622563256425652566256725682569257025712572257325742575257625772578257925802581258225832584258525862587
  1. #include "Configuration_prusa.h"
  2. #include "language_all.h"
  3. #define LCD_WIDTH 20
  4. extern unsigned char lang_selected;
  5. const char MSG_ACTIVE_EXTRUDER_EN[] PROGMEM = "Active Extruder: ";
  6. const char * const MSG_ACTIVE_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  7. MSG_ACTIVE_EXTRUDER_EN
  8. };
  9. const char MSG_ADJUSTZ_EN[] PROGMEM = "Auto adjust Z?";
  10. const char MSG_ADJUSTZ_CZ[] PROGMEM = "Auto doladit Z ?";
  11. const char * const MSG_ADJUSTZ_LANG_TABLE[LANG_NUM] PROGMEM = {
  12. MSG_ADJUSTZ_EN,
  13. MSG_ADJUSTZ_CZ
  14. };
  15. const char MSG_ALL_EN[] PROGMEM = "All";
  16. const char MSG_ALL_CZ[] PROGMEM = "Vse";
  17. const char * const MSG_ALL_LANG_TABLE[LANG_NUM] PROGMEM = {
  18. MSG_ALL_EN,
  19. MSG_ALL_CZ
  20. };
  21. const char MSG_AMAX_EN[] PROGMEM = "Amax ";
  22. const char * const MSG_AMAX_LANG_TABLE[1] PROGMEM = {
  23. MSG_AMAX_EN
  24. };
  25. const char MSG_AUTHOR_EN[] PROGMEM = " | Author: ";
  26. const char * const MSG_AUTHOR_LANG_TABLE[1] PROGMEM = {
  27. MSG_AUTHOR_EN
  28. };
  29. const char MSG_AUTOLOADING_ENABLED_EN[] PROGMEM = "Autoloading filament is active, just press the knob and insert filament...";
  30. const char MSG_AUTOLOADING_ENABLED_CZ[] PROGMEM = "Automaticke zavadeni filamentu aktivni, stisknete tlacitko a vlozte filament...";
  31. const char * const MSG_AUTOLOADING_ENABLED_LANG_TABLE[LANG_NUM] PROGMEM = {
  32. MSG_AUTOLOADING_ENABLED_EN,
  33. MSG_AUTOLOADING_ENABLED_CZ
  34. };
  35. const char MSG_AUTOLOADING_ONLY_IF_FSENS_ON_EN[] PROGMEM = "Autoloading filament available only when filament sensor is turned on...";
  36. const char MSG_AUTOLOADING_ONLY_IF_FSENS_ON_CZ[] PROGMEM = "Automaticke zavadeni filamentu dostupne pouze pri zapnutem filament senzoru...";
  37. const char * const MSG_AUTOLOADING_ONLY_IF_FSENS_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  38. MSG_AUTOLOADING_ONLY_IF_FSENS_ON_EN,
  39. MSG_AUTOLOADING_ONLY_IF_FSENS_ON_CZ
  40. };
  41. const char MSG_AUTOLOAD_FILAMENT_EN[] PROGMEM = "AutoLoad filament";
  42. const char MSG_AUTOLOAD_FILAMENT_CZ[] PROGMEM = "AutoZavedeni fil.";
  43. const char * const MSG_AUTOLOAD_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  44. MSG_AUTOLOAD_FILAMENT_EN,
  45. MSG_AUTOLOAD_FILAMENT_CZ
  46. };
  47. const char MSG_AUTO_HOME_EN[] PROGMEM = "Auto home";
  48. const char * const MSG_AUTO_HOME_LANG_TABLE[1] PROGMEM = {
  49. MSG_AUTO_HOME_EN
  50. };
  51. const char MSG_AUTO_MODE_ON_EN[] PROGMEM = "Mode [auto power]";
  52. const char MSG_AUTO_MODE_ON_CZ[] PROGMEM = "Mod [automaticky]";
  53. const char * const MSG_AUTO_MODE_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  54. MSG_AUTO_MODE_ON_EN,
  55. MSG_AUTO_MODE_ON_CZ
  56. };
  57. const char MSG_A_RETRACT_EN[] PROGMEM = "A-retract";
  58. const char * const MSG_A_RETRACT_LANG_TABLE[1] PROGMEM = {
  59. MSG_A_RETRACT_EN
  60. };
  61. const char MSG_BABYSTEPPING_X_EN[] PROGMEM = "Babystepping X";
  62. const char * const MSG_BABYSTEPPING_X_LANG_TABLE[1] PROGMEM = {
  63. MSG_BABYSTEPPING_X_EN
  64. };
  65. const char MSG_BABYSTEPPING_Y_EN[] PROGMEM = "Babystepping Y";
  66. const char * const MSG_BABYSTEPPING_Y_LANG_TABLE[1] PROGMEM = {
  67. MSG_BABYSTEPPING_Y_EN
  68. };
  69. const char MSG_BABYSTEPPING_Z_EN[] PROGMEM = "Adjusting Z";
  70. const char * const MSG_BABYSTEPPING_Z_LANG_TABLE[1] PROGMEM = {
  71. MSG_BABYSTEPPING_Z_EN
  72. };
  73. const char MSG_BABYSTEP_X_EN[] PROGMEM = "Babystep X";
  74. const char * const MSG_BABYSTEP_X_LANG_TABLE[1] PROGMEM = {
  75. MSG_BABYSTEP_X_EN
  76. };
  77. const char MSG_BABYSTEP_Y_EN[] PROGMEM = "Babystep Y";
  78. const char * const MSG_BABYSTEP_Y_LANG_TABLE[1] PROGMEM = {
  79. MSG_BABYSTEP_Y_EN
  80. };
  81. const char MSG_BABYSTEP_Z_EN[] PROGMEM = "Live adjust Z";
  82. const char MSG_BABYSTEP_Z_CZ[] PROGMEM = "Doladeni osy Z";
  83. const char * const MSG_BABYSTEP_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
  84. MSG_BABYSTEP_Z_EN,
  85. MSG_BABYSTEP_Z_CZ
  86. };
  87. const char MSG_BABYSTEP_Z_NOT_SET_EN[] PROGMEM = "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration.";
  88. const char MSG_BABYSTEP_Z_NOT_SET_CZ[] PROGMEM = "Neni zkalibrovana vzdalenost trysky od tiskove podlozky. Postupujte prosim podle manualu, kapitola Zaciname, odstavec Nastaveni prvni vrstvy.";
  89. const char * const MSG_BABYSTEP_Z_NOT_SET_LANG_TABLE[LANG_NUM] PROGMEM = {
  90. MSG_BABYSTEP_Z_NOT_SET_EN,
  91. MSG_BABYSTEP_Z_NOT_SET_CZ
  92. };
  93. const char MSG_BED_EN[] PROGMEM = "Bed";
  94. const char * const MSG_BED_LANG_TABLE[1] PROGMEM = {
  95. MSG_BED_EN
  96. };
  97. const char MSG_BED_CORRECTION_FRONT_EN[] PROGMEM = "Front side[um]";
  98. const char MSG_BED_CORRECTION_FRONT_CZ[] PROGMEM = "Vpredu [um]";
  99. const char * const MSG_BED_CORRECTION_FRONT_LANG_TABLE[LANG_NUM] PROGMEM = {
  100. MSG_BED_CORRECTION_FRONT_EN,
  101. MSG_BED_CORRECTION_FRONT_CZ
  102. };
  103. const char MSG_BED_CORRECTION_LEFT_EN[] PROGMEM = "Left side [um]";
  104. const char MSG_BED_CORRECTION_LEFT_CZ[] PROGMEM = "Vlevo [um]";
  105. const char * const MSG_BED_CORRECTION_LEFT_LANG_TABLE[LANG_NUM] PROGMEM = {
  106. MSG_BED_CORRECTION_LEFT_EN,
  107. MSG_BED_CORRECTION_LEFT_CZ
  108. };
  109. const char MSG_BED_CORRECTION_MENU_EN[] PROGMEM = "Bed level correct";
  110. const char MSG_BED_CORRECTION_MENU_CZ[] PROGMEM = "Korekce podlozky";
  111. const char * const MSG_BED_CORRECTION_MENU_LANG_TABLE[LANG_NUM] PROGMEM = {
  112. MSG_BED_CORRECTION_MENU_EN,
  113. MSG_BED_CORRECTION_MENU_CZ
  114. };
  115. const char MSG_BED_CORRECTION_REAR_EN[] PROGMEM = "Rear side [um]";
  116. const char MSG_BED_CORRECTION_REAR_CZ[] PROGMEM = "Vzadu [um]";
  117. const char * const MSG_BED_CORRECTION_REAR_LANG_TABLE[LANG_NUM] PROGMEM = {
  118. MSG_BED_CORRECTION_REAR_EN,
  119. MSG_BED_CORRECTION_REAR_CZ
  120. };
  121. const char MSG_BED_CORRECTION_RESET_EN[] PROGMEM = "Reset";
  122. const char * const MSG_BED_CORRECTION_RESET_LANG_TABLE[1] PROGMEM = {
  123. MSG_BED_CORRECTION_RESET_EN
  124. };
  125. const char MSG_BED_CORRECTION_RIGHT_EN[] PROGMEM = "Right side[um]";
  126. const char MSG_BED_CORRECTION_RIGHT_CZ[] PROGMEM = "Vpravo [um]";
  127. const char * const MSG_BED_CORRECTION_RIGHT_LANG_TABLE[LANG_NUM] PROGMEM = {
  128. MSG_BED_CORRECTION_RIGHT_EN,
  129. MSG_BED_CORRECTION_RIGHT_CZ
  130. };
  131. const char MSG_BED_DONE_EN[] PROGMEM = "Bed done";
  132. const char MSG_BED_DONE_CZ[] PROGMEM = "Bed OK.";
  133. const char * const MSG_BED_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
  134. MSG_BED_DONE_EN,
  135. MSG_BED_DONE_CZ
  136. };
  137. const char MSG_BED_HEATING_EN[] PROGMEM = "Bed Heating";
  138. const char MSG_BED_HEATING_CZ[] PROGMEM = "Zahrivani bed";
  139. const char * const MSG_BED_HEATING_LANG_TABLE[LANG_NUM] PROGMEM = {
  140. MSG_BED_HEATING_EN,
  141. MSG_BED_HEATING_CZ
  142. };
  143. const char MSG_BED_LEVELING_FAILED_POINT_HIGH_EN[] PROGMEM = "Bed leveling failed. Sensor triggered too high. Waiting for reset.";
  144. const char MSG_BED_LEVELING_FAILED_POINT_HIGH_CZ[] PROGMEM = "Kalibrace Z selhala. Sensor sepnul prilis vysoko. Cekam na reset.";
  145. const char * const MSG_BED_LEVELING_FAILED_POINT_HIGH_LANG_TABLE[LANG_NUM] PROGMEM = {
  146. MSG_BED_LEVELING_FAILED_POINT_HIGH_EN,
  147. MSG_BED_LEVELING_FAILED_POINT_HIGH_CZ
  148. };
  149. const char MSG_BED_LEVELING_FAILED_POINT_LOW_EN[] PROGMEM = "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset.";
  150. const char MSG_BED_LEVELING_FAILED_POINT_LOW_CZ[] PROGMEM = "Kalibrace Z selhala. Sensor nesepnul. Znecistena tryska? Cekam na reset.";
  151. const char * const MSG_BED_LEVELING_FAILED_POINT_LOW_LANG_TABLE[LANG_NUM] PROGMEM = {
  152. MSG_BED_LEVELING_FAILED_POINT_LOW_EN,
  153. MSG_BED_LEVELING_FAILED_POINT_LOW_CZ
  154. };
  155. const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_EN[] PROGMEM = "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset.";
  156. const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_CZ[] PROGMEM = "Kalibrace Z selhala. Sensor je odpojeny nebo preruseny kabel. Cekam na reset.";
  157. const char * const MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_LANG_TABLE[LANG_NUM] PROGMEM = {
  158. MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_EN,
  159. MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_CZ
  160. };
  161. const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_EN[] PROGMEM = "XYZ calibration failed. Front calibration points not reachable.";
  162. const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_CZ[] PROGMEM = "Kalibrace XYZ selhala. Predni kalibracni body moc vpredu. Srovnejte tiskarnu.";
  163. const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
  164. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_EN,
  165. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_CZ
  166. };
  167. const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_EN[] PROGMEM = "XYZ calibration failed. Left front calibration point not reachable.";
  168. const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_CZ[] PROGMEM = "Kalibrace XYZ selhala. Levy predni bod moc vpredu. Srovnejte tiskarnu.";
  169. const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
  170. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_EN,
  171. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_CZ
  172. };
  173. const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_EN[] PROGMEM = "XYZ calibration failed. Right front calibration point not reachable.";
  174. const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_CZ[] PROGMEM = "Kalibrace XYZ selhala. Pravy predni bod moc vpredu. Srovnejte tiskarnu.";
  175. const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
  176. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_EN,
  177. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_CZ
  178. };
  179. const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_EN[] PROGMEM = "XYZ calibration failed. Please consult the manual.";
  180. const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_CZ[] PROGMEM = "Kalibrace XYZ selhala. Nahlednete do manualu.";
  181. const char * const MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_LANG_TABLE[LANG_NUM] PROGMEM = {
  182. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_EN,
  183. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_CZ
  184. };
  185. const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_EN[] PROGMEM = "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!";
  186. const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_CZ[] PROGMEM = "Kalibrace XYZ v poradku. X/Y osy jsou kolme. Gratuluji!";
  187. const char * const MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_LANG_TABLE[LANG_NUM] PROGMEM = {
  188. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_EN,
  189. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_CZ
  190. };
  191. const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_EN[] PROGMEM = "XYZ calibration failed. Bed calibration point was not found.";
  192. const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_CZ[] PROGMEM = "Kalibrace XYZ selhala. Kalibracni bod podlozky nenalezen.";
  193. const char * const MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_LANG_TABLE[LANG_NUM] PROGMEM = {
  194. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_EN,
  195. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_CZ
  196. };
  197. const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_EN[] PROGMEM = "XYZ calibration all right. Skew will be corrected automatically.";
  198. const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_CZ[] PROGMEM = "Kalibrace XYZ v poradku. Zkoseni bude automaticky vyrovnano pri tisku.";
  199. const char * const MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_LANG_TABLE[LANG_NUM] PROGMEM = {
  200. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_EN,
  201. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_CZ
  202. };
  203. const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_EN[] PROGMEM = "XYZ calibration all right. X/Y axes are slightly skewed. Good job!";
  204. const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_CZ[] PROGMEM = "Kalibrace XYZ v poradku. X/Y osy mirne zkosene. Dobra prace!";
  205. const char * const MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_LANG_TABLE[LANG_NUM] PROGMEM = {
  206. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_EN,
  207. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_CZ
  208. };
  209. const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_EN[] PROGMEM = "XYZ calibration compromised. Front calibration points not reachable.";
  210. const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_CZ[] PROGMEM = "Kalibrace XYZ nepresna. Predni kalibracni body moc vpredu.";
  211. const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
  212. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_EN,
  213. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_CZ
  214. };
  215. const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_EN[] PROGMEM = "XYZ calibration compromised. Left front calibration point not reachable.";
  216. const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_CZ[] PROGMEM = "Kalibrace XYZ nepresna. Levy predni bod moc vpredu.";
  217. const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
  218. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_EN,
  219. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_CZ
  220. };
  221. const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_EN[] PROGMEM = "XYZ calibration compromised. Right front calibration point not reachable.";
  222. const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_CZ[] PROGMEM = "Kalibrace XYZ nepresna. Pravy predni bod moc vpredu.";
  223. const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = {
  224. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_EN,
  225. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_CZ
  226. };
  227. const char MSG_BEGIN_FILE_LIST_EN[] PROGMEM = "Begin file list";
  228. const char * const MSG_BEGIN_FILE_LIST_LANG_TABLE[1] PROGMEM = {
  229. MSG_BEGIN_FILE_LIST_EN
  230. };
  231. const char MSG_BROWNOUT_RESET_EN[] PROGMEM = " Brown out Reset";
  232. const char * const MSG_BROWNOUT_RESET_LANG_TABLE[1] PROGMEM = {
  233. MSG_BROWNOUT_RESET_EN
  234. };
  235. const char MSG_CALIBRATE_BED_EN[] PROGMEM = "Calibrate XYZ";
  236. const char MSG_CALIBRATE_BED_CZ[] PROGMEM = "Kalibrace XYZ";
  237. const char * const MSG_CALIBRATE_BED_LANG_TABLE[LANG_NUM] PROGMEM = {
  238. MSG_CALIBRATE_BED_EN,
  239. MSG_CALIBRATE_BED_CZ
  240. };
  241. const char MSG_CALIBRATE_BED_RESET_EN[] PROGMEM = "Reset XYZ calibr.";
  242. const char MSG_CALIBRATE_BED_RESET_CZ[] PROGMEM = "Reset XYZ kalibr.";
  243. const char * const MSG_CALIBRATE_BED_RESET_LANG_TABLE[LANG_NUM] PROGMEM = {
  244. MSG_CALIBRATE_BED_RESET_EN,
  245. MSG_CALIBRATE_BED_RESET_CZ
  246. };
  247. const char MSG_CALIBRATE_E_EN[] PROGMEM = "Calibrate E";
  248. const char MSG_CALIBRATE_E_CZ[] PROGMEM = "Kalibrovat E";
  249. const char * const MSG_CALIBRATE_E_LANG_TABLE[LANG_NUM] PROGMEM = {
  250. MSG_CALIBRATE_E_EN,
  251. MSG_CALIBRATE_E_CZ
  252. };
  253. const char MSG_CALIBRATE_PINDA_EN[] PROGMEM = "Calibrate";
  254. const char MSG_CALIBRATE_PINDA_CZ[] PROGMEM = "Zkalibrovat";
  255. const char * const MSG_CALIBRATE_PINDA_LANG_TABLE[LANG_NUM] PROGMEM = {
  256. MSG_CALIBRATE_PINDA_EN,
  257. MSG_CALIBRATE_PINDA_CZ
  258. };
  259. const char MSG_CALIBRATE_Z_AUTO_EN[] PROGMEM = "Calibrating Z";
  260. const char MSG_CALIBRATE_Z_AUTO_CZ[] PROGMEM = "Kalibruji Z";
  261. const char * const MSG_CALIBRATE_Z_AUTO_LANG_TABLE[LANG_NUM] PROGMEM = {
  262. MSG_CALIBRATE_Z_AUTO_EN,
  263. MSG_CALIBRATE_Z_AUTO_CZ
  264. };
  265. const char MSG_CALIBRATION_PINDA_MENU_EN[] PROGMEM = "Temp. calibration";
  266. const char MSG_CALIBRATION_PINDA_MENU_CZ[] PROGMEM = "Teplot. kalibrace";
  267. const char * const MSG_CALIBRATION_PINDA_MENU_LANG_TABLE[LANG_NUM] PROGMEM = {
  268. MSG_CALIBRATION_PINDA_MENU_EN,
  269. MSG_CALIBRATION_PINDA_MENU_CZ
  270. };
  271. const char MSG_CARD_MENU_EN[] PROGMEM = "Print from SD";
  272. const char MSG_CARD_MENU_CZ[] PROGMEM = "Tisk z SD";
  273. const char * const MSG_CARD_MENU_LANG_TABLE[LANG_NUM] PROGMEM = {
  274. MSG_CARD_MENU_EN,
  275. MSG_CARD_MENU_CZ
  276. };
  277. const char MSG_CHANGED_BOTH_EN[] PROGMEM = "Warning: both printer type and motherboard type changed.";
  278. const char MSG_CHANGED_BOTH_CZ[] PROGMEM = "Varovani: doslo ke zmene typu tiskarny a motherboardu.";
  279. const char * const MSG_CHANGED_BOTH_LANG_TABLE[LANG_NUM] PROGMEM = {
  280. MSG_CHANGED_BOTH_EN,
  281. MSG_CHANGED_BOTH_CZ
  282. };
  283. const char MSG_CHANGED_MOTHERBOARD_EN[] PROGMEM = "Warning: motherboard type changed.";
  284. const char MSG_CHANGED_MOTHERBOARD_CZ[] PROGMEM = "Varovani: doslo ke zmene typu motherboardu.";
  285. const char * const MSG_CHANGED_MOTHERBOARD_LANG_TABLE[LANG_NUM] PROGMEM = {
  286. MSG_CHANGED_MOTHERBOARD_EN,
  287. MSG_CHANGED_MOTHERBOARD_CZ
  288. };
  289. const char MSG_CHANGED_PRINTER_EN[] PROGMEM = "Warning: printer type changed.";
  290. const char MSG_CHANGED_PRINTER_CZ[] PROGMEM = "Varovani: doslo ke zmene typu tiskarny.";
  291. const char * const MSG_CHANGED_PRINTER_LANG_TABLE[LANG_NUM] PROGMEM = {
  292. MSG_CHANGED_PRINTER_EN,
  293. MSG_CHANGED_PRINTER_CZ
  294. };
  295. const char MSG_CHANGE_EXTR_EN[] PROGMEM = "Change extruder";
  296. const char MSG_CHANGE_EXTR_CZ[] PROGMEM = "Zmenit extruder";
  297. const char * const MSG_CHANGE_EXTR_LANG_TABLE[LANG_NUM] PROGMEM = {
  298. MSG_CHANGE_EXTR_EN,
  299. MSG_CHANGE_EXTR_CZ
  300. };
  301. const char MSG_CHANGE_SUCCESS_EN[] PROGMEM = "Change success!";
  302. const char MSG_CHANGE_SUCCESS_CZ[] PROGMEM = "Zmena uspesna!";
  303. const char * const MSG_CHANGE_SUCCESS_LANG_TABLE[LANG_NUM] PROGMEM = {
  304. MSG_CHANGE_SUCCESS_EN,
  305. MSG_CHANGE_SUCCESS_CZ
  306. };
  307. const char MSG_CHANGING_FILAMENT_EN[] PROGMEM = "Changing filament!";
  308. const char MSG_CHANGING_FILAMENT_CZ[] PROGMEM = "Vymena filamentu!";
  309. const char * const MSG_CHANGING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  310. MSG_CHANGING_FILAMENT_EN,
  311. MSG_CHANGING_FILAMENT_CZ
  312. };
  313. const char MSG_CHECK_IDLER_EN[] PROGMEM = "Please open idler and remove filament manually.";
  314. const char MSG_CHECK_IDLER_CZ[] PROGMEM = "Prosim otevrete idler a manualne odstrante filament.";
  315. const char * const MSG_CHECK_IDLER_LANG_TABLE[LANG_NUM] PROGMEM = {
  316. MSG_CHECK_IDLER_EN,
  317. MSG_CHECK_IDLER_CZ
  318. };
  319. const char MSG_CHOOSE_EXTRUDER_EN[] PROGMEM = "Choose extruder:";
  320. const char MSG_CHOOSE_EXTRUDER_CZ[] PROGMEM = "Vyberte extruder:";
  321. const char * const MSG_CHOOSE_EXTRUDER_LANG_TABLE[LANG_NUM] PROGMEM = {
  322. MSG_CHOOSE_EXTRUDER_EN,
  323. MSG_CHOOSE_EXTRUDER_CZ
  324. };
  325. const char MSG_CLEAN_NOZZLE_E_EN[] PROGMEM = "E calibration finished. Please clean the nozzle. Click when done.";
  326. const char MSG_CLEAN_NOZZLE_E_CZ[] PROGMEM = "E kalibrace ukoncena. Prosim ocistete trysku. Po te potvrdte tlacitkem.";
  327. const char * const MSG_CLEAN_NOZZLE_E_LANG_TABLE[LANG_NUM] PROGMEM = {
  328. MSG_CLEAN_NOZZLE_E_EN,
  329. MSG_CLEAN_NOZZLE_E_CZ
  330. };
  331. const char MSG_CNG_SDCARD_EN[] PROGMEM = "Change SD card";
  332. const char * const MSG_CNG_SDCARD_LANG_TABLE[1] PROGMEM = {
  333. MSG_CNG_SDCARD_EN
  334. };
  335. const char MSG_CONFIGURATION_VER_EN[] PROGMEM = " Last Updated: ";
  336. const char * const MSG_CONFIGURATION_VER_LANG_TABLE[1] PROGMEM = {
  337. MSG_CONFIGURATION_VER_EN
  338. };
  339. const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_EN[] PROGMEM = "Are left and right Z~carriages all up?";
  340. const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_CZ[] PROGMEM = "Dojely oba Z voziky k~hornimu dorazu?";
  341. const char * const MSG_CONFIRM_CARRIAGE_AT_THE_TOP_LANG_TABLE[LANG_NUM] PROGMEM = {
  342. MSG_CONFIRM_CARRIAGE_AT_THE_TOP_EN,
  343. MSG_CONFIRM_CARRIAGE_AT_THE_TOP_CZ
  344. };
  345. const char MSG_CONFIRM_NOZZLE_CLEAN_EN[] PROGMEM = "Please clean the nozzle for calibration. Click when done.";
  346. const char MSG_CONFIRM_NOZZLE_CLEAN_CZ[] PROGMEM = "Pro uspesnou kalibraci ocistete prosim tiskovou trysku. Potvrdte tlacitkem.";
  347. const char * const MSG_CONFIRM_NOZZLE_CLEAN_LANG_TABLE[LANG_NUM] PROGMEM = {
  348. MSG_CONFIRM_NOZZLE_CLEAN_EN,
  349. MSG_CONFIRM_NOZZLE_CLEAN_CZ
  350. };
  351. const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_EN[] PROGMEM = "Filaments are now adjusted. Please clean the nozzle for calibration. Click when done.";
  352. const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_CZ[] PROGMEM = "Filamenty jsou srovnany. Pro uspesnou kalibraci prosim ocistete trysku. Po te potvrdte tlacitkem.";
  353. const char * const MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_LANG_TABLE[LANG_NUM] PROGMEM = {
  354. MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_EN,
  355. MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_CZ
  356. };
  357. const char MSG_CONTROL_EN[] PROGMEM = "Control";
  358. const char * const MSG_CONTROL_LANG_TABLE[1] PROGMEM = {
  359. MSG_CONTROL_EN
  360. };
  361. const char MSG_COOLDOWN_EN[] PROGMEM = "Cooldown";
  362. const char MSG_COOLDOWN_CZ[] PROGMEM = "Zchladit";
  363. const char * const MSG_COOLDOWN_LANG_TABLE[LANG_NUM] PROGMEM = {
  364. MSG_COOLDOWN_EN,
  365. MSG_COOLDOWN_CZ
  366. };
  367. const char MSG_CORRECTLY_EN[] PROGMEM = "Changed correctly?";
  368. const char MSG_CORRECTLY_CZ[] PROGMEM = "Vymena ok?";
  369. const char * const MSG_CORRECTLY_LANG_TABLE[LANG_NUM] PROGMEM = {
  370. MSG_CORRECTLY_EN,
  371. MSG_CORRECTLY_CZ
  372. };
  373. const char MSG_COUNT_X_EN[] PROGMEM = " Count X: ";
  374. const char * const MSG_COUNT_X_LANG_TABLE[1] PROGMEM = {
  375. MSG_COUNT_X_EN
  376. };
  377. const char MSG_CRASHDETECT_NA_EN[] PROGMEM = "Crash det. [N/A]";
  378. const char * const MSG_CRASHDETECT_NA_LANG_TABLE[1] PROGMEM = {
  379. MSG_CRASHDETECT_NA_EN
  380. };
  381. const char MSG_CRASHDETECT_OFF_EN[] PROGMEM = "Crash det. [off]";
  382. const char MSG_CRASHDETECT_OFF_CZ[] PROGMEM = "Crash det. [vyp]";
  383. const char * const MSG_CRASHDETECT_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  384. MSG_CRASHDETECT_OFF_EN,
  385. MSG_CRASHDETECT_OFF_CZ
  386. };
  387. const char MSG_CRASHDETECT_ON_EN[] PROGMEM = "Crash det. [on]";
  388. const char MSG_CRASHDETECT_ON_CZ[] PROGMEM = "Crash det. [zap]";
  389. const char * const MSG_CRASHDETECT_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  390. MSG_CRASHDETECT_ON_EN,
  391. MSG_CRASHDETECT_ON_CZ
  392. };
  393. const char MSG_CRASH_DETECTED_EN[] PROGMEM = "Crash detected.";
  394. const char MSG_CRASH_DETECTED_CZ[] PROGMEM = "Detekovan naraz.";
  395. const char * const MSG_CRASH_DETECTED_LANG_TABLE[LANG_NUM] PROGMEM = {
  396. MSG_CRASH_DETECTED_EN,
  397. MSG_CRASH_DETECTED_CZ
  398. };
  399. const char MSG_CRASH_DETECTED2_EN[] PROGMEM = "Crash detected. Continue printing?";
  400. const char MSG_CRASH_DETECTED2_CZ[] PROGMEM = "Naraz detekovan, pokracovat v tisku?";
  401. const char * const MSG_CRASH_DETECTED2_LANG_TABLE[LANG_NUM] PROGMEM = {
  402. MSG_CRASH_DETECTED2_EN,
  403. MSG_CRASH_DETECTED2_CZ
  404. };
  405. const char MSG_CRASH_DET_ONLY_IN_NORMAL_EN[] PROGMEM = "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode";
  406. const char MSG_CRASH_DET_ONLY_IN_NORMAL_CZ[] PROGMEM = "\x1b[2JCrash detekce muze\x1b[1;0Hbyt zapnuta pouze v\x1b[2;0HNormal modu";
  407. const char * const MSG_CRASH_DET_ONLY_IN_NORMAL_LANG_TABLE[LANG_NUM] PROGMEM = {
  408. MSG_CRASH_DET_ONLY_IN_NORMAL_EN,
  409. MSG_CRASH_DET_ONLY_IN_NORMAL_CZ
  410. };
  411. const char MSG_CRASH_DET_STEALTH_FORCE_OFF_EN[] PROGMEM = "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode";
  412. const char MSG_CRASH_DET_STEALTH_FORCE_OFF_CZ[] PROGMEM = "\x1b[2JPOZOR:\x1b[1;0HCrash detekce\x1b[2;0Hdeaktivovana ve\x1b[3;0HStealth modu";
  413. const char * const MSG_CRASH_DET_STEALTH_FORCE_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  414. MSG_CRASH_DET_STEALTH_FORCE_OFF_EN,
  415. MSG_CRASH_DET_STEALTH_FORCE_OFF_CZ
  416. };
  417. const char MSG_CURRENT_EN[] PROGMEM = "Current";
  418. const char MSG_CURRENT_CZ[] PROGMEM = "Pouze aktualni";
  419. const char * const MSG_CURRENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  420. MSG_CURRENT_EN,
  421. MSG_CURRENT_CZ
  422. };
  423. const char MSG_DATE_EN[] PROGMEM = "Date:";
  424. const char MSG_DATE_CZ[] PROGMEM = "Datum:";
  425. const char * const MSG_DATE_LANG_TABLE[LANG_NUM] PROGMEM = {
  426. MSG_DATE_EN,
  427. MSG_DATE_CZ
  428. };
  429. const char MSG_DEFAULT_SETTINGS_LOADED_EN[] PROGMEM = "Old settings found. Default PID, Esteps etc. will be set.";
  430. const char MSG_DEFAULT_SETTINGS_LOADED_CZ[] PROGMEM = "Neplatne hodnoty nastaveni. Bude pouzito vychozi PID, Esteps atd.";
  431. const char * const MSG_DEFAULT_SETTINGS_LOADED_LANG_TABLE[LANG_NUM] PROGMEM = {
  432. MSG_DEFAULT_SETTINGS_LOADED_EN,
  433. MSG_DEFAULT_SETTINGS_LOADED_CZ
  434. };
  435. const char MSG_DISABLE_STEPPERS_EN[] PROGMEM = "Disable steppers";
  436. const char MSG_DISABLE_STEPPERS_CZ[] PROGMEM = "Vypnout motory";
  437. const char * const MSG_DISABLE_STEPPERS_LANG_TABLE[LANG_NUM] PROGMEM = {
  438. MSG_DISABLE_STEPPERS_EN,
  439. MSG_DISABLE_STEPPERS_CZ
  440. };
  441. const char MSG_DWELL_EN[] PROGMEM = "Sleep...";
  442. const char * const MSG_DWELL_LANG_TABLE[1] PROGMEM = {
  443. MSG_DWELL_EN
  444. };
  445. const char MSG_ENDSTOPS_HIT_EN[] PROGMEM = "endstops hit: ";
  446. const char * const MSG_ENDSTOPS_HIT_LANG_TABLE[1] PROGMEM = {
  447. MSG_ENDSTOPS_HIT_EN
  448. };
  449. const char MSG_ENDSTOP_HIT_EN[] PROGMEM = "TRIGGERED";
  450. const char * const MSG_ENDSTOP_HIT_LANG_TABLE[1] PROGMEM = {
  451. MSG_ENDSTOP_HIT_EN
  452. };
  453. const char MSG_ENDSTOP_OPEN_EN[] PROGMEM = "open";
  454. const char * const MSG_ENDSTOP_OPEN_LANG_TABLE[1] PROGMEM = {
  455. MSG_ENDSTOP_OPEN_EN
  456. };
  457. const char MSG_END_FILE_LIST_EN[] PROGMEM = "End file list";
  458. const char * const MSG_END_FILE_LIST_LANG_TABLE[1] PROGMEM = {
  459. MSG_END_FILE_LIST_EN
  460. };
  461. const char MSG_ERROR_EN[] PROGMEM = "ERROR:";
  462. const char MSG_ERROR_CZ[] PROGMEM = "CHYBA:";
  463. const char * const MSG_ERROR_LANG_TABLE[LANG_NUM] PROGMEM = {
  464. MSG_ERROR_EN,
  465. MSG_ERROR_CZ
  466. };
  467. const char MSG_ERR_CHECKSUM_MISMATCH_EN[] PROGMEM = "checksum mismatch, Last Line: ";
  468. const char * const MSG_ERR_CHECKSUM_MISMATCH_LANG_TABLE[1] PROGMEM = {
  469. MSG_ERR_CHECKSUM_MISMATCH_EN
  470. };
  471. const char MSG_ERR_COLD_EXTRUDE_STOP_EN[] PROGMEM = " cold extrusion prevented";
  472. const char * const MSG_ERR_COLD_EXTRUDE_STOP_LANG_TABLE[1] PROGMEM = {
  473. MSG_ERR_COLD_EXTRUDE_STOP_EN
  474. };
  475. const char MSG_ERR_KILLED_EN[] PROGMEM = "Printer halted. kill() called!";
  476. const char * const MSG_ERR_KILLED_LANG_TABLE[1] PROGMEM = {
  477. MSG_ERR_KILLED_EN
  478. };
  479. const char MSG_ERR_LINE_NO_EN[] PROGMEM = "Line Number is not Last Line Number+1, Last Line: ";
  480. const char * const MSG_ERR_LINE_NO_LANG_TABLE[1] PROGMEM = {
  481. MSG_ERR_LINE_NO_EN
  482. };
  483. const char MSG_ERR_LONG_EXTRUDE_STOP_EN[] PROGMEM = " too long extrusion prevented";
  484. const char * const MSG_ERR_LONG_EXTRUDE_STOP_LANG_TABLE[1] PROGMEM = {
  485. MSG_ERR_LONG_EXTRUDE_STOP_EN
  486. };
  487. const char MSG_ERR_NO_CHECKSUM_EN[] PROGMEM = "No Checksum with line number, Last Line: ";
  488. const char * const MSG_ERR_NO_CHECKSUM_LANG_TABLE[1] PROGMEM = {
  489. MSG_ERR_NO_CHECKSUM_EN
  490. };
  491. const char MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM_EN[] PROGMEM = "No Line Number with checksum, Last Line: ";
  492. const char * const MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM_LANG_TABLE[1] PROGMEM = {
  493. MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM_EN
  494. };
  495. const char MSG_ERR_NO_THERMISTORS_EN[] PROGMEM = "No thermistors - no temperature";
  496. const char * const MSG_ERR_NO_THERMISTORS_LANG_TABLE[1] PROGMEM = {
  497. MSG_ERR_NO_THERMISTORS_EN
  498. };
  499. const char MSG_ERR_STOPPED_EN[] PROGMEM = "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)";
  500. const char * const MSG_ERR_STOPPED_LANG_TABLE[1] PROGMEM = {
  501. MSG_ERR_STOPPED_EN
  502. };
  503. const char MSG_EXTERNAL_RESET_EN[] PROGMEM = " External Reset";
  504. const char * const MSG_EXTERNAL_RESET_LANG_TABLE[1] PROGMEM = {
  505. MSG_EXTERNAL_RESET_EN
  506. };
  507. const char MSG_EXTRUDER_EN[] PROGMEM = "Extruder";
  508. const char * const MSG_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  509. MSG_EXTRUDER_EN
  510. };
  511. const char MSG_EXTRUDER_1_EN[] PROGMEM = "Extruder 1";
  512. const char * const MSG_EXTRUDER_1_LANG_TABLE[1] PROGMEM = {
  513. MSG_EXTRUDER_1_EN
  514. };
  515. const char MSG_EXTRUDER_2_EN[] PROGMEM = "Extruder 2";
  516. const char * const MSG_EXTRUDER_2_LANG_TABLE[1] PROGMEM = {
  517. MSG_EXTRUDER_2_EN
  518. };
  519. const char MSG_EXTRUDER_3_EN[] PROGMEM = "Extruder 3";
  520. const char * const MSG_EXTRUDER_3_LANG_TABLE[1] PROGMEM = {
  521. MSG_EXTRUDER_3_EN
  522. };
  523. const char MSG_EXTRUDER_4_EN[] PROGMEM = "Extruder 4";
  524. const char * const MSG_EXTRUDER_4_LANG_TABLE[1] PROGMEM = {
  525. MSG_EXTRUDER_4_EN
  526. };
  527. const char MSG_EXTRUDER_CORRECTION_EN[] PROGMEM = "E-correct";
  528. const char * const MSG_EXTRUDER_CORRECTION_LANG_TABLE[1] PROGMEM = {
  529. MSG_EXTRUDER_CORRECTION_EN
  530. };
  531. const char MSG_EXTRUDER_CORRECTION_OFF_EN[] PROGMEM = " [off";
  532. const char * const MSG_EXTRUDER_CORRECTION_OFF_LANG_TABLE[1] PROGMEM = {
  533. MSG_EXTRUDER_CORRECTION_OFF_EN
  534. };
  535. const char MSG_E_CAL_KNOB_EN[] PROGMEM = "Rotate knob until mark reaches extruder body. Click when done.";
  536. const char MSG_E_CAL_KNOB_CZ[] PROGMEM = "Otacejte tlacitkem dokud znacka nedosahne tela extruderu. Potvrdte tlacitkem.";
  537. const char * const MSG_E_CAL_KNOB_LANG_TABLE[LANG_NUM] PROGMEM = {
  538. MSG_E_CAL_KNOB_EN,
  539. MSG_E_CAL_KNOB_CZ
  540. };
  541. const char MSG_Enqueing_EN[] PROGMEM = "enqueing \"";
  542. const char * const MSG_Enqueing_LANG_TABLE[1] PROGMEM = {
  543. MSG_Enqueing_EN
  544. };
  545. const char MSG_FACTOR_EN[] PROGMEM = " \002 Fact";
  546. const char * const MSG_FACTOR_LANG_TABLE[1] PROGMEM = {
  547. MSG_FACTOR_EN
  548. };
  549. const char MSG_FANS_CHECK_OFF_EN[] PROGMEM = "Fans check [off]";
  550. const char MSG_FANS_CHECK_OFF_CZ[] PROGMEM = "Kontr. vent.[vyp]";
  551. const char * const MSG_FANS_CHECK_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  552. MSG_FANS_CHECK_OFF_EN,
  553. MSG_FANS_CHECK_OFF_CZ
  554. };
  555. const char MSG_FANS_CHECK_ON_EN[] PROGMEM = "Fans check [on]";
  556. const char MSG_FANS_CHECK_ON_CZ[] PROGMEM = "Kontr. vent.[zap]";
  557. const char * const MSG_FANS_CHECK_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  558. MSG_FANS_CHECK_ON_EN,
  559. MSG_FANS_CHECK_ON_CZ
  560. };
  561. const char MSG_FAN_SPEED_EN[] PROGMEM = "Fan speed";
  562. const char MSG_FAN_SPEED_CZ[] PROGMEM = "Rychlost vent.";
  563. const char * const MSG_FAN_SPEED_LANG_TABLE[LANG_NUM] PROGMEM = {
  564. MSG_FAN_SPEED_EN,
  565. MSG_FAN_SPEED_CZ
  566. };
  567. const char MSG_FARM_CARD_MENU_EN[] PROGMEM = "Farm mode print";
  568. const char * const MSG_FARM_CARD_MENU_LANG_TABLE[1] PROGMEM = {
  569. MSG_FARM_CARD_MENU_EN
  570. };
  571. const char MSG_FILAMENTCHANGE_EN[] PROGMEM = "Change filament";
  572. const char MSG_FILAMENTCHANGE_CZ[] PROGMEM = "Vymenit filament";
  573. const char * const MSG_FILAMENTCHANGE_LANG_TABLE[LANG_NUM] PROGMEM = {
  574. MSG_FILAMENTCHANGE_EN,
  575. MSG_FILAMENTCHANGE_CZ
  576. };
  577. const char MSG_FILAMENT_CLEAN_EN[] PROGMEM = "Filament extruding & with correct color?";
  578. const char MSG_FILAMENT_CLEAN_CZ[] PROGMEM = "Filament vytlacen a spravne barvy?";
  579. const char * const MSG_FILAMENT_CLEAN_LANG_TABLE[LANG_NUM] PROGMEM = {
  580. MSG_FILAMENT_CLEAN_EN,
  581. MSG_FILAMENT_CLEAN_CZ
  582. };
  583. const char MSG_FILAMENT_LOADING_T0_EN[] PROGMEM = "Insert filament into extruder 1. Click when done.";
  584. const char MSG_FILAMENT_LOADING_T0_CZ[] PROGMEM = "Vlozte filament do extruderu 1. Potvrdte tlacitkem.";
  585. const char * const MSG_FILAMENT_LOADING_T0_LANG_TABLE[LANG_NUM] PROGMEM = {
  586. MSG_FILAMENT_LOADING_T0_EN,
  587. MSG_FILAMENT_LOADING_T0_CZ
  588. };
  589. const char MSG_FILAMENT_LOADING_T1_EN[] PROGMEM = "Insert filament into extruder 2. Click when done.";
  590. const char MSG_FILAMENT_LOADING_T1_CZ[] PROGMEM = "Vlozte filament do extruderu 2. Potvrdte tlacitkem.";
  591. const char * const MSG_FILAMENT_LOADING_T1_LANG_TABLE[LANG_NUM] PROGMEM = {
  592. MSG_FILAMENT_LOADING_T1_EN,
  593. MSG_FILAMENT_LOADING_T1_CZ
  594. };
  595. const char MSG_FILAMENT_LOADING_T2_EN[] PROGMEM = "Insert filament into extruder 3. Click when done.";
  596. const char MSG_FILAMENT_LOADING_T2_CZ[] PROGMEM = "Vlozte filament do extruderu 3. Potvrdte tlacitkem.";
  597. const char * const MSG_FILAMENT_LOADING_T2_LANG_TABLE[LANG_NUM] PROGMEM = {
  598. MSG_FILAMENT_LOADING_T2_EN,
  599. MSG_FILAMENT_LOADING_T2_CZ
  600. };
  601. const char MSG_FILAMENT_LOADING_T3_EN[] PROGMEM = "Insert filament into extruder 4. Click when done.";
  602. const char MSG_FILAMENT_LOADING_T3_CZ[] PROGMEM = "Vlozte filament do extruderu 4. Potvrdte tlacitkem.";
  603. const char * const MSG_FILAMENT_LOADING_T3_LANG_TABLE[LANG_NUM] PROGMEM = {
  604. MSG_FILAMENT_LOADING_T3_EN,
  605. MSG_FILAMENT_LOADING_T3_CZ
  606. };
  607. const char MSG_FILAMENT_SENSOR_EN[] PROGMEM = "Filament sensor";
  608. const char MSG_FILAMENT_SENSOR_CZ[] PROGMEM = "Senzor filamentu";
  609. const char * const MSG_FILAMENT_SENSOR_LANG_TABLE[LANG_NUM] PROGMEM = {
  610. MSG_FILAMENT_SENSOR_EN,
  611. MSG_FILAMENT_SENSOR_CZ
  612. };
  613. const char MSG_FILE_CNT_EN[] PROGMEM = "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100.";
  614. const char MSG_FILE_CNT_CZ[] PROGMEM = "Nektere soubory nebudou setrideny. Maximalni pocet souboru pro setrideni je 100.";
  615. const char * const MSG_FILE_CNT_LANG_TABLE[LANG_NUM] PROGMEM = {
  616. MSG_FILE_CNT_EN,
  617. MSG_FILE_CNT_CZ
  618. };
  619. const char MSG_FILE_INCOMPLETE_EN[] PROGMEM = "File incomplete. Continue anyway?";
  620. const char MSG_FILE_INCOMPLETE_CZ[] PROGMEM = "Soubor nekompletni. Pokracovat?";
  621. const char * const MSG_FILE_INCOMPLETE_LANG_TABLE[LANG_NUM] PROGMEM = {
  622. MSG_FILE_INCOMPLETE_EN,
  623. MSG_FILE_INCOMPLETE_CZ
  624. };
  625. const char MSG_FILE_PRINTED_EN[] PROGMEM = "Done printing file";
  626. const char * const MSG_FILE_PRINTED_LANG_TABLE[1] PROGMEM = {
  627. MSG_FILE_PRINTED_EN
  628. };
  629. const char MSG_FILE_SAVED_EN[] PROGMEM = "Done saving file.";
  630. const char * const MSG_FILE_SAVED_LANG_TABLE[1] PROGMEM = {
  631. MSG_FILE_SAVED_EN
  632. };
  633. const char MSG_FIL_ADJUSTING_EN[] PROGMEM = "Adjusting filaments. Please wait.";
  634. const char MSG_FIL_ADJUSTING_CZ[] PROGMEM = "Probiha srovnani filamentu. Prosim cekejte.";
  635. const char * const MSG_FIL_ADJUSTING_LANG_TABLE[LANG_NUM] PROGMEM = {
  636. MSG_FIL_ADJUSTING_EN,
  637. MSG_FIL_ADJUSTING_CZ
  638. };
  639. const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN[] PROGMEM = "Iteration ";
  640. const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_CZ[] PROGMEM = "Iterace ";
  641. const char * const MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_LANG_TABLE[LANG_NUM] PROGMEM = {
  642. MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN,
  643. MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_CZ
  644. };
  645. const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_EN[] PROGMEM = "Searching bed calibration point";
  646. const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_CZ[] PROGMEM = "Hledam kalibracni bod podlozky";
  647. const char * const MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_LANG_TABLE[LANG_NUM] PROGMEM = {
  648. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_EN,
  649. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_CZ
  650. };
  651. const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_EN[] PROGMEM = " of 4";
  652. const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_CZ[] PROGMEM = " z 4";
  653. const char * const MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_LANG_TABLE[LANG_NUM] PROGMEM = {
  654. MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_EN,
  655. MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_CZ
  656. };
  657. const char MSG_FINISHING_MOVEMENTS_EN[] PROGMEM = "Finishing movements";
  658. const char MSG_FINISHING_MOVEMENTS_CZ[] PROGMEM = "Dokoncovani pohybu";
  659. const char * const MSG_FINISHING_MOVEMENTS_LANG_TABLE[LANG_NUM] PROGMEM = {
  660. MSG_FINISHING_MOVEMENTS_EN,
  661. MSG_FINISHING_MOVEMENTS_CZ
  662. };
  663. const char MSG_FLOW_EN[] PROGMEM = "Flow";
  664. const char MSG_FLOW_CZ[] PROGMEM = "Prutok";
  665. const char * const MSG_FLOW_LANG_TABLE[LANG_NUM] PROGMEM = {
  666. MSG_FLOW_EN,
  667. MSG_FLOW_CZ
  668. };
  669. const char MSG_FLOW0_EN[] PROGMEM = "Flow 0";
  670. const char * const MSG_FLOW0_LANG_TABLE[1] PROGMEM = {
  671. MSG_FLOW0_EN
  672. };
  673. const char MSG_FLOW1_EN[] PROGMEM = "Flow 1";
  674. const char * const MSG_FLOW1_LANG_TABLE[1] PROGMEM = {
  675. MSG_FLOW1_EN
  676. };
  677. const char MSG_FLOW2_EN[] PROGMEM = "Flow 2";
  678. const char * const MSG_FLOW2_LANG_TABLE[1] PROGMEM = {
  679. MSG_FLOW2_EN
  680. };
  681. const char MSG_FOLLOW_CALIBRATION_FLOW_EN[] PROGMEM = "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow.";
  682. const char MSG_FOLLOW_CALIBRATION_FLOW_CZ[] PROGMEM = "Tiskarna nebyla jeste zkalibrovana. Postupujte prosim podle manualu, kapitola Zaciname, odstavec Postup kalibrace.";
  683. const char * const MSG_FOLLOW_CALIBRATION_FLOW_LANG_TABLE[LANG_NUM] PROGMEM = {
  684. MSG_FOLLOW_CALIBRATION_FLOW_EN,
  685. MSG_FOLLOW_CALIBRATION_FLOW_CZ
  686. };
  687. const char MSG_FORCE_SELFTEST_EN[] PROGMEM = "Selftest will be run to calibrate accurate sensorless rehoming.";
  688. const char MSG_FORCE_SELFTEST_CZ[] PROGMEM = "Pro kalibraci presneho rehomovani bude nyni spusten selftest.";
  689. const char * const MSG_FORCE_SELFTEST_LANG_TABLE[LANG_NUM] PROGMEM = {
  690. MSG_FORCE_SELFTEST_EN,
  691. MSG_FORCE_SELFTEST_CZ
  692. };
  693. const char MSG_FREE_MEMORY_EN[] PROGMEM = " Free Memory: ";
  694. const char * const MSG_FREE_MEMORY_LANG_TABLE[1] PROGMEM = {
  695. MSG_FREE_MEMORY_EN
  696. };
  697. const char MSG_FSENSOR_NA_EN[] PROGMEM = "Fil. sensor [N/A]";
  698. const char MSG_FSENSOR_NA_CZ[] PROGMEM = "Fil. senzor [N/A]";
  699. const char * const MSG_FSENSOR_NA_LANG_TABLE[LANG_NUM] PROGMEM = {
  700. MSG_FSENSOR_NA_EN,
  701. MSG_FSENSOR_NA_CZ
  702. };
  703. const char MSG_FSENSOR_OFF_EN[] PROGMEM = "Fil. sensor [off]";
  704. const char MSG_FSENSOR_OFF_CZ[] PROGMEM = "Fil. senzor [vyp]";
  705. const char * const MSG_FSENSOR_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  706. MSG_FSENSOR_OFF_EN,
  707. MSG_FSENSOR_OFF_CZ
  708. };
  709. const char MSG_FSENSOR_ON_EN[] PROGMEM = "Fil. sensor [on]";
  710. const char MSG_FSENSOR_ON_CZ[] PROGMEM = "Fil. senzor [zap]";
  711. const char * const MSG_FSENSOR_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  712. MSG_FSENSOR_ON_EN,
  713. MSG_FSENSOR_ON_CZ
  714. };
  715. const char MSG_FSENS_AUTOLOAD_NA_EN[] PROGMEM = "F. autoload [N/A]";
  716. const char MSG_FSENS_AUTOLOAD_NA_CZ[] PROGMEM = "F. autozav. [N/A]";
  717. const char * const MSG_FSENS_AUTOLOAD_NA_LANG_TABLE[LANG_NUM] PROGMEM = {
  718. MSG_FSENS_AUTOLOAD_NA_EN,
  719. MSG_FSENS_AUTOLOAD_NA_CZ
  720. };
  721. const char MSG_FSENS_AUTOLOAD_OFF_EN[] PROGMEM = "F. autoload [off]";
  722. const char MSG_FSENS_AUTOLOAD_OFF_CZ[] PROGMEM = "F. autozav. [vyp]";
  723. const char * const MSG_FSENS_AUTOLOAD_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  724. MSG_FSENS_AUTOLOAD_OFF_EN,
  725. MSG_FSENS_AUTOLOAD_OFF_CZ
  726. };
  727. const char MSG_FSENS_AUTOLOAD_ON_EN[] PROGMEM = "F. autoload [on]";
  728. const char MSG_FSENS_AUTOLOAD_ON_CZ[] PROGMEM = "F. autozav. [zap]";
  729. const char * const MSG_FSENS_AUTOLOAD_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  730. MSG_FSENS_AUTOLOAD_ON_EN,
  731. MSG_FSENS_AUTOLOAD_ON_CZ
  732. };
  733. const char MSG_FSENS_NOT_RESPONDING_EN[] PROGMEM = "ERROR: Filament sensor is not responding, please check connection.";
  734. const char MSG_FSENS_NOT_RESPONDING_CZ[] PROGMEM = "CHYBA: Filament senzor nereaguje, zkontrolujte zapojeni.";
  735. const char * const MSG_FSENS_NOT_RESPONDING_LANG_TABLE[LANG_NUM] PROGMEM = {
  736. MSG_FSENS_NOT_RESPONDING_EN,
  737. MSG_FSENS_NOT_RESPONDING_CZ
  738. };
  739. const char MSG_FW_VERSION_ALPHA_EN[] PROGMEM = "You are using firmware alpha version. This is development version. Using this version is not recommended and may cause printer damage.";
  740. const char MSG_FW_VERSION_ALPHA_CZ[] PROGMEM = "Pouzivate alpha verzi firmwaru. Jedna se o vyvojovou verzi. Pouzivani teto verze firmware neni doporuceno a muze zpusobit poskozeni tiskarny.";
  741. const char * const MSG_FW_VERSION_ALPHA_LANG_TABLE[LANG_NUM] PROGMEM = {
  742. MSG_FW_VERSION_ALPHA_EN,
  743. MSG_FW_VERSION_ALPHA_CZ
  744. };
  745. const char MSG_FW_VERSION_BETA_EN[] PROGMEM = "You are using firmware beta version. This is development version. Using this version is not recommended and may cause printer damage.";
  746. const char MSG_FW_VERSION_BETA_CZ[] PROGMEM = "Pouzivate beta verzi firmwaru. Jedna se o vyvojovou verzi. Pouzivani teto verze firmware neni doporuceno a muze zpusobit poskozeni tiskarny.";
  747. const char * const MSG_FW_VERSION_BETA_LANG_TABLE[LANG_NUM] PROGMEM = {
  748. MSG_FW_VERSION_BETA_EN,
  749. MSG_FW_VERSION_BETA_CZ
  750. };
  751. const char MSG_FW_VERSION_RC_EN[] PROGMEM = "This firmware version is release candidate. Some of the features may not work properly.";
  752. const char MSG_FW_VERSION_RC_CZ[] PROGMEM = "Tato verze firmware je release candidate. Nektere z funkci nemusi pracovat spolehlive.";
  753. const char * const MSG_FW_VERSION_RC_LANG_TABLE[LANG_NUM] PROGMEM = {
  754. MSG_FW_VERSION_RC_EN,
  755. MSG_FW_VERSION_RC_CZ
  756. };
  757. const char MSG_FW_VERSION_UNKNOWN_EN[] PROGMEM = "WARNING: This is an unofficial, unsupported build. Use at your own risk!";
  758. const char MSG_FW_VERSION_UNKNOWN_CZ[] PROGMEM = "VAROVANI: Neznama, nepodporovana verze firmware. Pouziti na vlastni nebezpeci!";
  759. const char * const MSG_FW_VERSION_UNKNOWN_LANG_TABLE[LANG_NUM] PROGMEM = {
  760. MSG_FW_VERSION_UNKNOWN_EN,
  761. MSG_FW_VERSION_UNKNOWN_CZ
  762. };
  763. const char MSG_HEATING_EN[] PROGMEM = "Heating";
  764. const char MSG_HEATING_CZ[] PROGMEM = "Zahrivani";
  765. const char * const MSG_HEATING_LANG_TABLE[LANG_NUM] PROGMEM = {
  766. MSG_HEATING_EN,
  767. MSG_HEATING_CZ
  768. };
  769. const char MSG_HEATING_COMPLETE_EN[] PROGMEM = "Heating done.";
  770. const char MSG_HEATING_COMPLETE_CZ[] PROGMEM = "Zahrivani OK.";
  771. const char * const MSG_HEATING_COMPLETE_LANG_TABLE[LANG_NUM] PROGMEM = {
  772. MSG_HEATING_COMPLETE_EN,
  773. MSG_HEATING_COMPLETE_CZ
  774. };
  775. const char MSG_HOMEYZ_EN[] PROGMEM = "Calibrate Z";
  776. const char MSG_HOMEYZ_CZ[] PROGMEM = "Kalibrovat Z";
  777. const char * const MSG_HOMEYZ_LANG_TABLE[LANG_NUM] PROGMEM = {
  778. MSG_HOMEYZ_EN,
  779. MSG_HOMEYZ_CZ
  780. };
  781. const char MSG_HOMEYZ_DONE_EN[] PROGMEM = "Calibration done";
  782. const char MSG_HOMEYZ_DONE_CZ[] PROGMEM = "Kalibrace OK";
  783. const char * const MSG_HOMEYZ_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
  784. MSG_HOMEYZ_DONE_EN,
  785. MSG_HOMEYZ_DONE_CZ
  786. };
  787. const char MSG_HOMEYZ_PROGRESS_EN[] PROGMEM = "Calibrating Z";
  788. const char MSG_HOMEYZ_PROGRESS_CZ[] PROGMEM = "Kalibruji Z";
  789. const char * const MSG_HOMEYZ_PROGRESS_LANG_TABLE[LANG_NUM] PROGMEM = {
  790. MSG_HOMEYZ_PROGRESS_EN,
  791. MSG_HOMEYZ_PROGRESS_CZ
  792. };
  793. const char MSG_HOTEND_OFFSET_EN[] PROGMEM = "Hotend offsets:";
  794. const char * const MSG_HOTEND_OFFSET_LANG_TABLE[1] PROGMEM = {
  795. MSG_HOTEND_OFFSET_EN
  796. };
  797. const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_EN[] PROGMEM = "Improving bed calibration point";
  798. const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_CZ[] PROGMEM = "Zlepsuji presnost kalibracniho bodu";
  799. const char * const MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_LANG_TABLE[LANG_NUM] PROGMEM = {
  800. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_EN,
  801. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_CZ
  802. };
  803. const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_EN[] PROGMEM = " of 4";
  804. const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_CZ[] PROGMEM = " z 4";
  805. const char * const MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_LANG_TABLE[LANG_NUM] PROGMEM = {
  806. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_EN,
  807. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_CZ
  808. };
  809. const char MSG_INFO_EXTRUDER_EN[] PROGMEM = "Extruder info";
  810. const char * const MSG_INFO_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  811. MSG_INFO_EXTRUDER_EN
  812. };
  813. const char MSG_INFO_FILAMENT_XDIFF_EN[] PROGMEM = "Fil. Xd:";
  814. const char * const MSG_INFO_FILAMENT_XDIFF_LANG_TABLE[1] PROGMEM = {
  815. MSG_INFO_FILAMENT_XDIFF_EN
  816. };
  817. const char MSG_INFO_FILAMENT_YDIFF_EN[] PROGMEM = "Fil. Ydiff:";
  818. const char * const MSG_INFO_FILAMENT_YDIFF_LANG_TABLE[1] PROGMEM = {
  819. MSG_INFO_FILAMENT_YDIFF_EN
  820. };
  821. const char MSG_INFO_NOZZLE_FAN_EN[] PROGMEM = "Nozzle FAN:";
  822. const char MSG_INFO_NOZZLE_FAN_CZ[] PROGMEM = "Trysk. vent:";
  823. const char * const MSG_INFO_NOZZLE_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
  824. MSG_INFO_NOZZLE_FAN_EN,
  825. MSG_INFO_NOZZLE_FAN_CZ
  826. };
  827. const char MSG_INFO_PRINT_FAN_EN[] PROGMEM = "Print FAN: ";
  828. const char MSG_INFO_PRINT_FAN_CZ[] PROGMEM = "Tisk. vent:";
  829. const char * const MSG_INFO_PRINT_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
  830. MSG_INFO_PRINT_FAN_EN,
  831. MSG_INFO_PRINT_FAN_CZ
  832. };
  833. const char MSG_INIT_SDCARD_EN[] PROGMEM = "Init. SD card";
  834. const char * const MSG_INIT_SDCARD_LANG_TABLE[1] PROGMEM = {
  835. MSG_INIT_SDCARD_EN
  836. };
  837. const char MSG_INSERT_FILAMENT_EN[] PROGMEM = "Insert filament";
  838. const char MSG_INSERT_FILAMENT_CZ[] PROGMEM = "Vlozte filament";
  839. const char * const MSG_INSERT_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  840. MSG_INSERT_FILAMENT_EN,
  841. MSG_INSERT_FILAMENT_CZ
  842. };
  843. const char MSG_INVALID_EXTRUDER_EN[] PROGMEM = "Invalid extruder";
  844. const char * const MSG_INVALID_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  845. MSG_INVALID_EXTRUDER_EN
  846. };
  847. const char MSG_KILLED_EN[] PROGMEM = "KILLED. ";
  848. const char * const MSG_KILLED_LANG_TABLE[1] PROGMEM = {
  849. MSG_KILLED_EN
  850. };
  851. const char MSG_LANGUAGE_NAME_EN[] PROGMEM = "English";
  852. const char MSG_LANGUAGE_NAME_CZ[] PROGMEM = "Cestina";
  853. const char * const MSG_LANGUAGE_NAME_LANG_TABLE[LANG_NUM] PROGMEM = {
  854. MSG_LANGUAGE_NAME_EN,
  855. MSG_LANGUAGE_NAME_CZ
  856. };
  857. const char MSG_LANGUAGE_SELECT_EN[] PROGMEM = "Select language";
  858. const char MSG_LANGUAGE_SELECT_CZ[] PROGMEM = "Vyber jazyka";
  859. const char * const MSG_LANGUAGE_SELECT_LANG_TABLE[LANG_NUM] PROGMEM = {
  860. MSG_LANGUAGE_SELECT_EN,
  861. MSG_LANGUAGE_SELECT_CZ
  862. };
  863. const char MSG_LEFT_EN[] PROGMEM = "Left:";
  864. const char MSG_LEFT_CZ[] PROGMEM = "Levy:";
  865. const char * const MSG_LEFT_LANG_TABLE[LANG_NUM] PROGMEM = {
  866. MSG_LEFT_EN,
  867. MSG_LEFT_CZ
  868. };
  869. const char MSG_LOADING_COLOR_EN[] PROGMEM = "Loading color";
  870. const char MSG_LOADING_COLOR_CZ[] PROGMEM = "Cisteni barvy";
  871. const char * const MSG_LOADING_COLOR_LANG_TABLE[LANG_NUM] PROGMEM = {
  872. MSG_LOADING_COLOR_EN,
  873. MSG_LOADING_COLOR_CZ
  874. };
  875. const char MSG_LOADING_FILAMENT_EN[] PROGMEM = "Loading filament";
  876. const char MSG_LOADING_FILAMENT_CZ[] PROGMEM = "Zavadeni filamentu";
  877. const char * const MSG_LOADING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  878. MSG_LOADING_FILAMENT_EN,
  879. MSG_LOADING_FILAMENT_CZ
  880. };
  881. const char MSG_LOAD_ALL_EN[] PROGMEM = "Load all";
  882. const char MSG_LOAD_ALL_CZ[] PROGMEM = "Zavest vse";
  883. const char * const MSG_LOAD_ALL_LANG_TABLE[LANG_NUM] PROGMEM = {
  884. MSG_LOAD_ALL_EN,
  885. MSG_LOAD_ALL_CZ
  886. };
  887. const char MSG_LOAD_EPROM_EN[] PROGMEM = "Load memory";
  888. const char * const MSG_LOAD_EPROM_LANG_TABLE[1] PROGMEM = {
  889. MSG_LOAD_EPROM_EN
  890. };
  891. const char MSG_LOAD_FILAMENT_EN[] PROGMEM = "Load filament";
  892. const char MSG_LOAD_FILAMENT_CZ[] PROGMEM = "Zavest filament";
  893. const char * const MSG_LOAD_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  894. MSG_LOAD_FILAMENT_EN,
  895. MSG_LOAD_FILAMENT_CZ
  896. };
  897. const char MSG_LOAD_FILAMENT_1_EN[] PROGMEM = "Load filament 1";
  898. const char MSG_LOAD_FILAMENT_1_CZ[] PROGMEM = "Zavest filament 1";
  899. const char * const MSG_LOAD_FILAMENT_1_LANG_TABLE[LANG_NUM] PROGMEM = {
  900. MSG_LOAD_FILAMENT_1_EN,
  901. MSG_LOAD_FILAMENT_1_CZ
  902. };
  903. const char MSG_LOAD_FILAMENT_2_EN[] PROGMEM = "Load filament 2";
  904. const char MSG_LOAD_FILAMENT_2_CZ[] PROGMEM = "Zavest filament 2";
  905. const char * const MSG_LOAD_FILAMENT_2_LANG_TABLE[LANG_NUM] PROGMEM = {
  906. MSG_LOAD_FILAMENT_2_EN,
  907. MSG_LOAD_FILAMENT_2_CZ
  908. };
  909. const char MSG_LOAD_FILAMENT_3_EN[] PROGMEM = "Load filament 3";
  910. const char MSG_LOAD_FILAMENT_3_CZ[] PROGMEM = "Zavest filament 3";
  911. const char * const MSG_LOAD_FILAMENT_3_LANG_TABLE[LANG_NUM] PROGMEM = {
  912. MSG_LOAD_FILAMENT_3_EN,
  913. MSG_LOAD_FILAMENT_3_CZ
  914. };
  915. const char MSG_LOAD_FILAMENT_4_EN[] PROGMEM = "Load filament 4";
  916. const char MSG_LOAD_FILAMENT_4_CZ[] PROGMEM = "Zavest filament 4";
  917. const char * const MSG_LOAD_FILAMENT_4_LANG_TABLE[LANG_NUM] PROGMEM = {
  918. MSG_LOAD_FILAMENT_4_EN,
  919. MSG_LOAD_FILAMENT_4_CZ
  920. };
  921. const char MSG_LOOSE_PULLEY_EN[] PROGMEM = "Loose pulley";
  922. const char MSG_LOOSE_PULLEY_CZ[] PROGMEM = "Uvolnena remenicka";
  923. const char * const MSG_LOOSE_PULLEY_LANG_TABLE[LANG_NUM] PROGMEM = {
  924. MSG_LOOSE_PULLEY_EN,
  925. MSG_LOOSE_PULLEY_CZ
  926. };
  927. const char MSG_M104_INVALID_EXTRUDER_EN[] PROGMEM = "M104 Invalid extruder ";
  928. const char * const MSG_M104_INVALID_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  929. MSG_M104_INVALID_EXTRUDER_EN
  930. };
  931. const char MSG_M105_INVALID_EXTRUDER_EN[] PROGMEM = "M105 Invalid extruder ";
  932. const char * const MSG_M105_INVALID_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  933. MSG_M105_INVALID_EXTRUDER_EN
  934. };
  935. const char MSG_M109_INVALID_EXTRUDER_EN[] PROGMEM = "M109 Invalid extruder ";
  936. const char * const MSG_M109_INVALID_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  937. MSG_M109_INVALID_EXTRUDER_EN
  938. };
  939. const char MSG_M115_REPORT_EN[] PROGMEM = "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:https://github.com/prusa3d/Prusa-i3-Plus/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:1 UUID:00000000-0000-0000-0000-000000000000\n";
  940. const char * const MSG_M115_REPORT_LANG_TABLE[1] PROGMEM = {
  941. MSG_M115_REPORT_EN
  942. };
  943. const char MSG_M117_V2_CALIBRATION_EN[] PROGMEM = "M117 First layer cal.";
  944. const char MSG_M117_V2_CALIBRATION_CZ[] PROGMEM = "M117 Kal. prvni vrstvy";
  945. const char * const MSG_M117_V2_CALIBRATION_LANG_TABLE[LANG_NUM] PROGMEM = {
  946. MSG_M117_V2_CALIBRATION_EN,
  947. MSG_M117_V2_CALIBRATION_CZ
  948. };
  949. const char MSG_M119_REPORT_EN[] PROGMEM = "Reporting endstop status";
  950. const char * const MSG_M119_REPORT_LANG_TABLE[1] PROGMEM = {
  951. MSG_M119_REPORT_EN
  952. };
  953. const char MSG_M200_INVALID_EXTRUDER_EN[] PROGMEM = "M200 Invalid extruder ";
  954. const char * const MSG_M200_INVALID_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  955. MSG_M200_INVALID_EXTRUDER_EN
  956. };
  957. const char MSG_M218_INVALID_EXTRUDER_EN[] PROGMEM = "M218 Invalid extruder ";
  958. const char * const MSG_M218_INVALID_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  959. MSG_M218_INVALID_EXTRUDER_EN
  960. };
  961. const char MSG_M221_INVALID_EXTRUDER_EN[] PROGMEM = "M221 Invalid extruder ";
  962. const char * const MSG_M221_INVALID_EXTRUDER_LANG_TABLE[1] PROGMEM = {
  963. MSG_M221_INVALID_EXTRUDER_EN
  964. };
  965. const char MSG_MAIN_EN[] PROGMEM = "Main";
  966. const char MSG_MAIN_CZ[] PROGMEM = "Hlavni nabidka";
  967. const char * const MSG_MAIN_LANG_TABLE[LANG_NUM] PROGMEM = {
  968. MSG_MAIN_EN,
  969. MSG_MAIN_CZ
  970. };
  971. const char MSG_MARK_FIL_EN[] PROGMEM = "Mark filament 100mm from extruder body. Click when done.";
  972. const char MSG_MARK_FIL_CZ[] PROGMEM = "Oznacte filament 100 mm od tela extruderu a po te potvrdte tlacitkem.";
  973. const char * const MSG_MARK_FIL_LANG_TABLE[LANG_NUM] PROGMEM = {
  974. MSG_MARK_FIL_EN,
  975. MSG_MARK_FIL_CZ
  976. };
  977. const char MSG_MAX_EN[] PROGMEM = " \002 Max";
  978. const char * const MSG_MAX_LANG_TABLE[1] PROGMEM = {
  979. MSG_MAX_EN
  980. };
  981. const char MSG_MEASURED_SKEW_EN[] PROGMEM = "Measured skew:";
  982. const char MSG_MEASURED_SKEW_CZ[] PROGMEM = "Merene zkoseni:";
  983. const char * const MSG_MEASURED_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
  984. MSG_MEASURED_SKEW_EN,
  985. MSG_MEASURED_SKEW_CZ
  986. };
  987. const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_EN[] PROGMEM = "Measuring reference height of calibration point";
  988. const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_CZ[] PROGMEM = "Merim referencni vysku kalibracniho bodu";
  989. const char * const MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_LANG_TABLE[LANG_NUM] PROGMEM = {
  990. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_EN,
  991. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_CZ
  992. };
  993. const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_EN[] PROGMEM = " of 9";
  994. const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_CZ[] PROGMEM = " z 9";
  995. const char * const MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_LANG_TABLE[LANG_NUM] PROGMEM = {
  996. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_EN,
  997. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_CZ
  998. };
  999. const char MSG_MENU_BELT_STATUS_EN[] PROGMEM = "Belt status";
  1000. const char MSG_MENU_BELT_STATUS_CZ[] PROGMEM = "Stav remenu";
  1001. const char * const MSG_MENU_BELT_STATUS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1002. MSG_MENU_BELT_STATUS_EN,
  1003. MSG_MENU_BELT_STATUS_CZ
  1004. };
  1005. const char MSG_MENU_CALIBRATION_EN[] PROGMEM = "Calibration";
  1006. const char MSG_MENU_CALIBRATION_CZ[] PROGMEM = "Kalibrace";
  1007. const char * const MSG_MENU_CALIBRATION_LANG_TABLE[LANG_NUM] PROGMEM = {
  1008. MSG_MENU_CALIBRATION_EN,
  1009. MSG_MENU_CALIBRATION_CZ
  1010. };
  1011. const char MSG_MENU_TEMPERATURES_EN[] PROGMEM = "Temperatures";
  1012. const char MSG_MENU_TEMPERATURES_CZ[] PROGMEM = "Teploty";
  1013. const char * const MSG_MENU_TEMPERATURES_LANG_TABLE[LANG_NUM] PROGMEM = {
  1014. MSG_MENU_TEMPERATURES_EN,
  1015. MSG_MENU_TEMPERATURES_CZ
  1016. };
  1017. const char MSG_MENU_VOLTAGES_EN[] PROGMEM = "Voltages";
  1018. const char MSG_MENU_VOLTAGES_CZ[] PROGMEM = "Napeti";
  1019. const char * const MSG_MENU_VOLTAGES_LANG_TABLE[LANG_NUM] PROGMEM = {
  1020. MSG_MENU_VOLTAGES_EN,
  1021. MSG_MENU_VOLTAGES_CZ
  1022. };
  1023. const char MSG_MESH_BED_LEVELING_EN[] PROGMEM = "Mesh Bed Leveling";
  1024. const char * const MSG_MESH_BED_LEVELING_LANG_TABLE[1] PROGMEM = {
  1025. MSG_MESH_BED_LEVELING_EN
  1026. };
  1027. const char MSG_MIN_EN[] PROGMEM = " \002 Min";
  1028. const char * const MSG_MIN_LANG_TABLE[1] PROGMEM = {
  1029. MSG_MIN_EN
  1030. };
  1031. const char MSG_MOTION_EN[] PROGMEM = "Motion";
  1032. const char * const MSG_MOTION_LANG_TABLE[1] PROGMEM = {
  1033. MSG_MOTION_EN
  1034. };
  1035. const char MSG_MOVE_01MM_EN[] PROGMEM = "Move 0.1mm";
  1036. const char * const MSG_MOVE_01MM_LANG_TABLE[1] PROGMEM = {
  1037. MSG_MOVE_01MM_EN
  1038. };
  1039. const char MSG_MOVE_10MM_EN[] PROGMEM = "Move 10mm";
  1040. const char * const MSG_MOVE_10MM_LANG_TABLE[1] PROGMEM = {
  1041. MSG_MOVE_10MM_EN
  1042. };
  1043. const char MSG_MOVE_1MM_EN[] PROGMEM = "Move 1mm";
  1044. const char * const MSG_MOVE_1MM_LANG_TABLE[1] PROGMEM = {
  1045. MSG_MOVE_1MM_EN
  1046. };
  1047. const char MSG_MOVE_AXIS_EN[] PROGMEM = "Move axis";
  1048. const char MSG_MOVE_AXIS_CZ[] PROGMEM = "Posunout osu";
  1049. const char * const MSG_MOVE_AXIS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1050. MSG_MOVE_AXIS_EN,
  1051. MSG_MOVE_AXIS_CZ
  1052. };
  1053. const char MSG_MOVE_CARRIAGE_TO_THE_TOP_EN[] PROGMEM = "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done.";
  1054. const char MSG_MOVE_CARRIAGE_TO_THE_TOP_CZ[] PROGMEM = "Kalibrace XYZ. Otacenim tlacitka posunte Z osu az k~hornimu dorazu. Potvrdte tlacitkem.";
  1055. const char * const MSG_MOVE_CARRIAGE_TO_THE_TOP_LANG_TABLE[LANG_NUM] PROGMEM = {
  1056. MSG_MOVE_CARRIAGE_TO_THE_TOP_EN,
  1057. MSG_MOVE_CARRIAGE_TO_THE_TOP_CZ
  1058. };
  1059. const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_EN[] PROGMEM = "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done.";
  1060. const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_CZ[] PROGMEM = "Kalibrace Z. Otacenim tlacitka posunte Z osu az k~hornimu dorazu. Potvrdte tlacitkem.";
  1061. const char * const MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
  1062. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_EN,
  1063. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_CZ
  1064. };
  1065. const char MSG_MOVE_E_EN[] PROGMEM = "Extruder";
  1066. const char * const MSG_MOVE_E_LANG_TABLE[1] PROGMEM = {
  1067. MSG_MOVE_E_EN
  1068. };
  1069. const char MSG_MOVE_X_EN[] PROGMEM = "Move X";
  1070. const char MSG_MOVE_X_CZ[] PROGMEM = "Posunout X";
  1071. const char * const MSG_MOVE_X_LANG_TABLE[LANG_NUM] PROGMEM = {
  1072. MSG_MOVE_X_EN,
  1073. MSG_MOVE_X_CZ
  1074. };
  1075. const char MSG_MOVE_Y_EN[] PROGMEM = "Move Y";
  1076. const char MSG_MOVE_Y_CZ[] PROGMEM = "Posunout Y";
  1077. const char * const MSG_MOVE_Y_LANG_TABLE[LANG_NUM] PROGMEM = {
  1078. MSG_MOVE_Y_EN,
  1079. MSG_MOVE_Y_CZ
  1080. };
  1081. const char MSG_MOVE_Z_EN[] PROGMEM = "Move Z";
  1082. const char MSG_MOVE_Z_CZ[] PROGMEM = "Posunout Z";
  1083. const char * const MSG_MOVE_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
  1084. MSG_MOVE_Z_EN,
  1085. MSG_MOVE_Z_CZ
  1086. };
  1087. const char MSG_NEW_FIRMWARE_AVAILABLE_EN[] PROGMEM = "New firmware version available:";
  1088. const char MSG_NEW_FIRMWARE_AVAILABLE_CZ[] PROGMEM = "Vysla nova verze firmware:";
  1089. const char * const MSG_NEW_FIRMWARE_AVAILABLE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1090. MSG_NEW_FIRMWARE_AVAILABLE_EN,
  1091. MSG_NEW_FIRMWARE_AVAILABLE_CZ
  1092. };
  1093. const char MSG_NEW_FIRMWARE_PLEASE_UPGRADE_EN[] PROGMEM = "Please upgrade.";
  1094. const char MSG_NEW_FIRMWARE_PLEASE_UPGRADE_CZ[] PROGMEM = "Prosim aktualizujte.";
  1095. const char * const MSG_NEW_FIRMWARE_PLEASE_UPGRADE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1096. MSG_NEW_FIRMWARE_PLEASE_UPGRADE_EN,
  1097. MSG_NEW_FIRMWARE_PLEASE_UPGRADE_CZ
  1098. };
  1099. const char MSG_NO_EN[] PROGMEM = "No";
  1100. const char MSG_NO_CZ[] PROGMEM = "Ne";
  1101. const char * const MSG_NO_LANG_TABLE[LANG_NUM] PROGMEM = {
  1102. MSG_NO_EN,
  1103. MSG_NO_CZ
  1104. };
  1105. const char MSG_NOT_COLOR_EN[] PROGMEM = "Color not correct";
  1106. const char MSG_NOT_COLOR_CZ[] PROGMEM = "Barva neni cista";
  1107. const char * const MSG_NOT_COLOR_LANG_TABLE[LANG_NUM] PROGMEM = {
  1108. MSG_NOT_COLOR_EN,
  1109. MSG_NOT_COLOR_CZ
  1110. };
  1111. const char MSG_NOT_LOADED_EN[] PROGMEM = "Filament not loaded";
  1112. const char MSG_NOT_LOADED_CZ[] PROGMEM = "Filament nezaveden";
  1113. const char * const MSG_NOT_LOADED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1114. MSG_NOT_LOADED_EN,
  1115. MSG_NOT_LOADED_CZ
  1116. };
  1117. const char MSG_NOZZLE_EN[] PROGMEM = "Nozzle";
  1118. const char MSG_NOZZLE_CZ[] PROGMEM = "Tryska";
  1119. const char * const MSG_NOZZLE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1120. MSG_NOZZLE_EN,
  1121. MSG_NOZZLE_CZ
  1122. };
  1123. const char MSG_NOZZLE1_EN[] PROGMEM = "Nozzle2";
  1124. const char * const MSG_NOZZLE1_LANG_TABLE[1] PROGMEM = {
  1125. MSG_NOZZLE1_EN
  1126. };
  1127. const char MSG_NOZZLE2_EN[] PROGMEM = "Nozzle3";
  1128. const char * const MSG_NOZZLE2_LANG_TABLE[1] PROGMEM = {
  1129. MSG_NOZZLE2_EN
  1130. };
  1131. const char MSG_NO_CARD_EN[] PROGMEM = "No SD card";
  1132. const char MSG_NO_CARD_CZ[] PROGMEM = "Zadna SD karta";
  1133. const char * const MSG_NO_CARD_LANG_TABLE[LANG_NUM] PROGMEM = {
  1134. MSG_NO_CARD_EN,
  1135. MSG_NO_CARD_CZ
  1136. };
  1137. const char MSG_NO_MOVE_EN[] PROGMEM = "No move.";
  1138. const char * const MSG_NO_MOVE_LANG_TABLE[1] PROGMEM = {
  1139. MSG_NO_MOVE_EN
  1140. };
  1141. const char MSG_OFF_EN[] PROGMEM = "Off";
  1142. const char * const MSG_OFF_LANG_TABLE[1] PROGMEM = {
  1143. MSG_OFF_EN
  1144. };
  1145. const char MSG_OK_EN[] PROGMEM = "ok";
  1146. const char * const MSG_OK_LANG_TABLE[1] PROGMEM = {
  1147. MSG_OK_EN
  1148. };
  1149. const char MSG_ON_EN[] PROGMEM = "On ";
  1150. const char * const MSG_ON_LANG_TABLE[1] PROGMEM = {
  1151. MSG_ON_EN
  1152. };
  1153. const char MSG_PAPER_EN[] PROGMEM = "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately.";
  1154. const char MSG_PAPER_CZ[] PROGMEM = "Umistete list papiru na podlozku a udrzujte jej pod tryskou behem mereni prvnich 4 bodu. Pokud tryska zachyti papir, vypnete tiskarnu.";
  1155. const char * const MSG_PAPER_LANG_TABLE[LANG_NUM] PROGMEM = {
  1156. MSG_PAPER_EN,
  1157. MSG_PAPER_CZ
  1158. };
  1159. const char MSG_PAUSE_PRINT_EN[] PROGMEM = "Pause print";
  1160. const char MSG_PAUSE_PRINT_CZ[] PROGMEM = "Pozastavit tisk";
  1161. const char * const MSG_PAUSE_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1162. MSG_PAUSE_PRINT_EN,
  1163. MSG_PAUSE_PRINT_CZ
  1164. };
  1165. const char MSG_PICK_Z_EN[] PROGMEM = "Pick print";
  1166. const char MSG_PICK_Z_CZ[] PROGMEM = "Vyberte vytisk";
  1167. const char * const MSG_PICK_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
  1168. MSG_PICK_Z_EN,
  1169. MSG_PICK_Z_CZ
  1170. };
  1171. const char MSG_PID_EXTRUDER_EN[] PROGMEM = "PID calibration";
  1172. const char MSG_PID_EXTRUDER_CZ[] PROGMEM = "PID kalibrace";
  1173. const char * const MSG_PID_EXTRUDER_LANG_TABLE[LANG_NUM] PROGMEM = {
  1174. MSG_PID_EXTRUDER_EN,
  1175. MSG_PID_EXTRUDER_CZ
  1176. };
  1177. const char MSG_PID_FINISHED_EN[] PROGMEM = "PID cal. finished";
  1178. const char MSG_PID_FINISHED_CZ[] PROGMEM = "PID kal. ukoncena";
  1179. const char * const MSG_PID_FINISHED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1180. MSG_PID_FINISHED_EN,
  1181. MSG_PID_FINISHED_CZ
  1182. };
  1183. const char MSG_PID_RUNNING_EN[] PROGMEM = "PID cal. ";
  1184. const char MSG_PID_RUNNING_CZ[] PROGMEM = "PID kal. ";
  1185. const char * const MSG_PID_RUNNING_LANG_TABLE[LANG_NUM] PROGMEM = {
  1186. MSG_PID_RUNNING_EN,
  1187. MSG_PID_RUNNING_CZ
  1188. };
  1189. const char MSG_PINDA_NOT_CALIBRATED_EN[] PROGMEM = "Temperature calibration has not been run yet";
  1190. const char MSG_PINDA_NOT_CALIBRATED_CZ[] PROGMEM = "Tiskarna nebyla teplotne zkalibrovana";
  1191. const char * const MSG_PINDA_NOT_CALIBRATED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1192. MSG_PINDA_NOT_CALIBRATED_EN,
  1193. MSG_PINDA_NOT_CALIBRATED_CZ
  1194. };
  1195. const char MSG_PINDA_PREHEAT_EN[] PROGMEM = "PINDA Heating";
  1196. const char MSG_PINDA_PREHEAT_CZ[] PROGMEM = "Nahrivani PINDA";
  1197. const char * const MSG_PINDA_PREHEAT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1198. MSG_PINDA_PREHEAT_EN,
  1199. MSG_PINDA_PREHEAT_CZ
  1200. };
  1201. const char MSG_PLACE_STEEL_SHEET_EN[] PROGMEM = "Please place steel sheet on heatbed.";
  1202. const char MSG_PLACE_STEEL_SHEET_CZ[] PROGMEM = "Umistete prosim tiskovy plat na heatbed";
  1203. const char * const MSG_PLACE_STEEL_SHEET_LANG_TABLE[LANG_NUM] PROGMEM = {
  1204. MSG_PLACE_STEEL_SHEET_EN,
  1205. MSG_PLACE_STEEL_SHEET_CZ
  1206. };
  1207. const char MSG_PLANNER_BUFFER_BYTES_EN[] PROGMEM = " PlannerBufferBytes: ";
  1208. const char * const MSG_PLANNER_BUFFER_BYTES_LANG_TABLE[1] PROGMEM = {
  1209. MSG_PLANNER_BUFFER_BYTES_EN
  1210. };
  1211. const char MSG_PLA_FILAMENT_LOADED_EN[] PROGMEM = "Is PLA filament loaded?";
  1212. const char MSG_PLA_FILAMENT_LOADED_CZ[] PROGMEM = "Je PLA filament zaveden?";
  1213. const char * const MSG_PLA_FILAMENT_LOADED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1214. MSG_PLA_FILAMENT_LOADED_EN,
  1215. MSG_PLA_FILAMENT_LOADED_CZ
  1216. };
  1217. const char MSG_PLEASE_LOAD_PLA_EN[] PROGMEM = "Please load PLA filament first.";
  1218. const char MSG_PLEASE_LOAD_PLA_CZ[] PROGMEM = "Nejdrive zavedte PLA filament prosim.";
  1219. const char * const MSG_PLEASE_LOAD_PLA_LANG_TABLE[LANG_NUM] PROGMEM = {
  1220. MSG_PLEASE_LOAD_PLA_EN,
  1221. MSG_PLEASE_LOAD_PLA_CZ
  1222. };
  1223. const char MSG_PLEASE_WAIT_EN[] PROGMEM = "Please wait";
  1224. const char MSG_PLEASE_WAIT_CZ[] PROGMEM = "Prosim cekejte";
  1225. const char * const MSG_PLEASE_WAIT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1226. MSG_PLEASE_WAIT_EN,
  1227. MSG_PLEASE_WAIT_CZ
  1228. };
  1229. const char MSG_POSITION_UNKNOWN_EN[] PROGMEM = "Home X/Y before Z";
  1230. const char * const MSG_POSITION_UNKNOWN_LANG_TABLE[1] PROGMEM = {
  1231. MSG_POSITION_UNKNOWN_EN
  1232. };
  1233. const char MSG_POWERUP_EN[] PROGMEM = "PowerUp";
  1234. const char * const MSG_POWERUP_LANG_TABLE[1] PROGMEM = {
  1235. MSG_POWERUP_EN
  1236. };
  1237. const char MSG_PREHEAT_EN[] PROGMEM = "Preheat";
  1238. const char MSG_PREHEAT_CZ[] PROGMEM = "Predehrev";
  1239. const char * const MSG_PREHEAT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1240. MSG_PREHEAT_EN,
  1241. MSG_PREHEAT_CZ
  1242. };
  1243. const char MSG_PREHEAT_NOZZLE_EN[] PROGMEM = "Preheat the nozzle!";
  1244. const char MSG_PREHEAT_NOZZLE_CZ[] PROGMEM = "Predehrejte trysku!";
  1245. const char * const MSG_PREHEAT_NOZZLE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1246. MSG_PREHEAT_NOZZLE_EN,
  1247. MSG_PREHEAT_NOZZLE_CZ
  1248. };
  1249. const char MSG_PREPARE_FILAMENT_EN[] PROGMEM = "Prepare new filament";
  1250. const char MSG_PREPARE_FILAMENT_CZ[] PROGMEM = "Pripravte filament";
  1251. const char * const MSG_PREPARE_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1252. MSG_PREPARE_FILAMENT_EN,
  1253. MSG_PREPARE_FILAMENT_CZ
  1254. };
  1255. const char MSG_PRESS_EN[] PROGMEM = "and press the knob";
  1256. const char MSG_PRESS_CZ[] PROGMEM = "a stisknete tlacitko";
  1257. const char * const MSG_PRESS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1258. MSG_PRESS_EN,
  1259. MSG_PRESS_CZ
  1260. };
  1261. const char MSG_PRESS_TO_PREHEAT_EN[] PROGMEM = "Press knob to preheat nozzle and continue.";
  1262. const char MSG_PRESS_TO_PREHEAT_CZ[] PROGMEM = "Pro nahrati trysky a pokracovani stisknete tlacitko.";
  1263. const char * const MSG_PRESS_TO_PREHEAT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1264. MSG_PRESS_TO_PREHEAT_EN,
  1265. MSG_PRESS_TO_PREHEAT_CZ
  1266. };
  1267. const char MSG_PRESS_TO_UNLOAD_EN[] PROGMEM = "Please press the knob to unload filament";
  1268. const char MSG_PRESS_TO_UNLOAD_CZ[] PROGMEM = "Pro vysunuti filamentu stisknete prosim tlacitko";
  1269. const char * const MSG_PRESS_TO_UNLOAD_LANG_TABLE[LANG_NUM] PROGMEM = {
  1270. MSG_PRESS_TO_UNLOAD_EN,
  1271. MSG_PRESS_TO_UNLOAD_CZ
  1272. };
  1273. const char MSG_PRINTER_DISCONNECTED_EN[] PROGMEM = "Printer disconnected";
  1274. const char * const MSG_PRINTER_DISCONNECTED_LANG_TABLE[1] PROGMEM = {
  1275. MSG_PRINTER_DISCONNECTED_EN
  1276. };
  1277. const char MSG_PRINT_ABORTED_EN[] PROGMEM = "Print aborted";
  1278. const char MSG_PRINT_ABORTED_CZ[] PROGMEM = "Tisk prerusen";
  1279. const char * const MSG_PRINT_ABORTED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1280. MSG_PRINT_ABORTED_EN,
  1281. MSG_PRINT_ABORTED_CZ
  1282. };
  1283. const char MSG_PRINT_PAUSED_EN[] PROGMEM = "Print paused";
  1284. const char MSG_PRINT_PAUSED_CZ[] PROGMEM = "Tisk pozastaven";
  1285. const char * const MSG_PRINT_PAUSED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1286. MSG_PRINT_PAUSED_EN,
  1287. MSG_PRINT_PAUSED_CZ
  1288. };
  1289. const char MSG_PRUSA3D_EN[] PROGMEM = "prusa3d.com";
  1290. const char MSG_PRUSA3D_CZ[] PROGMEM = "prusa3d.cz";
  1291. const char * const MSG_PRUSA3D_LANG_TABLE[LANG_NUM] PROGMEM = {
  1292. MSG_PRUSA3D_EN,
  1293. MSG_PRUSA3D_CZ
  1294. };
  1295. const char MSG_PRUSA3D_FORUM_EN[] PROGMEM = "forum.prusa3d.com";
  1296. const char MSG_PRUSA3D_FORUM_CZ[] PROGMEM = "forum.prusa3d.cz";
  1297. const char * const MSG_PRUSA3D_FORUM_LANG_TABLE[LANG_NUM] PROGMEM = {
  1298. MSG_PRUSA3D_FORUM_EN,
  1299. MSG_PRUSA3D_FORUM_CZ
  1300. };
  1301. const char MSG_PRUSA3D_HOWTO_EN[] PROGMEM = "howto.prusa3d.com";
  1302. const char MSG_PRUSA3D_HOWTO_CZ[] PROGMEM = "howto.prusa3d.cz";
  1303. const char * const MSG_PRUSA3D_HOWTO_LANG_TABLE[LANG_NUM] PROGMEM = {
  1304. MSG_PRUSA3D_HOWTO_EN,
  1305. MSG_PRUSA3D_HOWTO_CZ
  1306. };
  1307. const char MSG_PULL_OUT_FILAMENT_EN[] PROGMEM = "Please pull out filament immediately";
  1308. const char MSG_PULL_OUT_FILAMENT_CZ[] PROGMEM = "Prosim vyjmete urychlene filament";
  1309. const char * const MSG_PULL_OUT_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1310. MSG_PULL_OUT_FILAMENT_EN,
  1311. MSG_PULL_OUT_FILAMENT_CZ
  1312. };
  1313. const char MSG_REBOOT_EN[] PROGMEM = "Reboot the printer";
  1314. const char MSG_REBOOT_CZ[] PROGMEM = "Restartujte tiskarnu";
  1315. const char * const MSG_REBOOT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1316. MSG_REBOOT_EN,
  1317. MSG_REBOOT_CZ
  1318. };
  1319. const char MSG_RECOVERING_PRINT_EN[] PROGMEM = "Recovering print ";
  1320. const char MSG_RECOVERING_PRINT_CZ[] PROGMEM = "Obnovovani tisku ";
  1321. const char * const MSG_RECOVERING_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1322. MSG_RECOVERING_PRINT_EN,
  1323. MSG_RECOVERING_PRINT_CZ
  1324. };
  1325. const char MSG_RECOVER_PRINT_EN[] PROGMEM = "Blackout occurred. Recover print?";
  1326. const char MSG_RECOVER_PRINT_CZ[] PROGMEM = "Detekovan vypadek proudu.Obnovit tisk?";
  1327. const char * const MSG_RECOVER_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1328. MSG_RECOVER_PRINT_EN,
  1329. MSG_RECOVER_PRINT_CZ
  1330. };
  1331. const char MSG_RECTRACT_EN[] PROGMEM = "Rectract";
  1332. const char * const MSG_RECTRACT_LANG_TABLE[1] PROGMEM = {
  1333. MSG_RECTRACT_EN
  1334. };
  1335. const char MSG_REFRESH_EN[] PROGMEM = "\xF8" "Refresh";
  1336. const char * const MSG_REFRESH_LANG_TABLE[1] PROGMEM = {
  1337. MSG_REFRESH_EN
  1338. };
  1339. const char MSG_REMOVE_STEEL_SHEET_EN[] PROGMEM = "Please remove steel sheet from heatbed.";
  1340. const char MSG_REMOVE_STEEL_SHEET_CZ[] PROGMEM = "Odstrante tiskovy plat z heatbed prosim.";
  1341. const char * const MSG_REMOVE_STEEL_SHEET_LANG_TABLE[LANG_NUM] PROGMEM = {
  1342. MSG_REMOVE_STEEL_SHEET_EN,
  1343. MSG_REMOVE_STEEL_SHEET_CZ
  1344. };
  1345. const char MSG_RESEND_EN[] PROGMEM = "Resend: ";
  1346. const char * const MSG_RESEND_LANG_TABLE[1] PROGMEM = {
  1347. MSG_RESEND_EN
  1348. };
  1349. const char MSG_RESET_CALIBRATE_E_EN[] PROGMEM = "Reset E Cal.";
  1350. const char * const MSG_RESET_CALIBRATE_E_LANG_TABLE[1] PROGMEM = {
  1351. MSG_RESET_CALIBRATE_E_EN
  1352. };
  1353. const char MSG_RESTORE_FAILSAFE_EN[] PROGMEM = "Restore failsafe";
  1354. const char * const MSG_RESTORE_FAILSAFE_LANG_TABLE[1] PROGMEM = {
  1355. MSG_RESTORE_FAILSAFE_EN
  1356. };
  1357. const char MSG_RESUME_PRINT_EN[] PROGMEM = "Resume print";
  1358. const char MSG_RESUME_PRINT_CZ[] PROGMEM = "Pokracovat";
  1359. const char * const MSG_RESUME_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1360. MSG_RESUME_PRINT_EN,
  1361. MSG_RESUME_PRINT_CZ
  1362. };
  1363. const char MSG_RESUMING_EN[] PROGMEM = "Resuming print";
  1364. const char MSG_RESUMING_CZ[] PROGMEM = "Obnoveni tisku";
  1365. const char * const MSG_RESUMING_LANG_TABLE[LANG_NUM] PROGMEM = {
  1366. MSG_RESUMING_EN,
  1367. MSG_RESUMING_CZ
  1368. };
  1369. const char MSG_RESUMING_PRINT_EN[] PROGMEM = "Resuming print";
  1370. const char MSG_RESUMING_PRINT_CZ[] PROGMEM = "Obnovovani tisku";
  1371. const char * const MSG_RESUMING_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1372. MSG_RESUMING_PRINT_EN,
  1373. MSG_RESUMING_PRINT_CZ
  1374. };
  1375. const char MSG_RIGHT_EN[] PROGMEM = "Right:";
  1376. const char MSG_RIGHT_CZ[] PROGMEM = "Pravy:";
  1377. const char * const MSG_RIGHT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1378. MSG_RIGHT_EN,
  1379. MSG_RIGHT_CZ
  1380. };
  1381. const char MSG_SD_CANT_ENTER_SUBDIR_EN[] PROGMEM = "Cannot enter subdir: ";
  1382. const char * const MSG_SD_CANT_ENTER_SUBDIR_LANG_TABLE[1] PROGMEM = {
  1383. MSG_SD_CANT_ENTER_SUBDIR_EN
  1384. };
  1385. const char MSG_SD_CANT_OPEN_SUBDIR_EN[] PROGMEM = "Cannot open subdir";
  1386. const char * const MSG_SD_CANT_OPEN_SUBDIR_LANG_TABLE[1] PROGMEM = {
  1387. MSG_SD_CANT_OPEN_SUBDIR_EN
  1388. };
  1389. const char MSG_SD_CARD_OK_EN[] PROGMEM = "SD card ok";
  1390. const char * const MSG_SD_CARD_OK_LANG_TABLE[1] PROGMEM = {
  1391. MSG_SD_CARD_OK_EN
  1392. };
  1393. const char MSG_SD_ERR_WRITE_TO_FILE_EN[] PROGMEM = "error writing to file";
  1394. const char * const MSG_SD_ERR_WRITE_TO_FILE_LANG_TABLE[1] PROGMEM = {
  1395. MSG_SD_ERR_WRITE_TO_FILE_EN
  1396. };
  1397. const char MSG_SD_FILE_OPENED_EN[] PROGMEM = "File opened: ";
  1398. const char * const MSG_SD_FILE_OPENED_LANG_TABLE[1] PROGMEM = {
  1399. MSG_SD_FILE_OPENED_EN
  1400. };
  1401. const char MSG_SD_FILE_SELECTED_EN[] PROGMEM = "File selected";
  1402. const char * const MSG_SD_FILE_SELECTED_LANG_TABLE[1] PROGMEM = {
  1403. MSG_SD_FILE_SELECTED_EN
  1404. };
  1405. const char MSG_SD_INIT_FAIL_EN[] PROGMEM = "SD init fail";
  1406. const char * const MSG_SD_INIT_FAIL_LANG_TABLE[1] PROGMEM = {
  1407. MSG_SD_INIT_FAIL_EN
  1408. };
  1409. const char MSG_SD_INSERTED_EN[] PROGMEM = "Card inserted";
  1410. const char MSG_SD_INSERTED_CZ[] PROGMEM = "Karta vlozena";
  1411. const char * const MSG_SD_INSERTED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1412. MSG_SD_INSERTED_EN,
  1413. MSG_SD_INSERTED_CZ
  1414. };
  1415. const char MSG_SD_NOT_PRINTING_EN[] PROGMEM = "Not SD printing";
  1416. const char * const MSG_SD_NOT_PRINTING_LANG_TABLE[1] PROGMEM = {
  1417. MSG_SD_NOT_PRINTING_EN
  1418. };
  1419. const char MSG_SD_OPENROOT_FAIL_EN[] PROGMEM = "openRoot failed";
  1420. const char * const MSG_SD_OPENROOT_FAIL_LANG_TABLE[1] PROGMEM = {
  1421. MSG_SD_OPENROOT_FAIL_EN
  1422. };
  1423. const char MSG_SD_OPEN_FILE_FAIL_EN[] PROGMEM = "open failed, File: ";
  1424. const char * const MSG_SD_OPEN_FILE_FAIL_LANG_TABLE[1] PROGMEM = {
  1425. MSG_SD_OPEN_FILE_FAIL_EN
  1426. };
  1427. const char MSG_SD_PRINTING_BYTE_EN[] PROGMEM = "SD printing byte ";
  1428. const char * const MSG_SD_PRINTING_BYTE_LANG_TABLE[1] PROGMEM = {
  1429. MSG_SD_PRINTING_BYTE_EN
  1430. };
  1431. const char MSG_SD_REMOVED_EN[] PROGMEM = "Card removed";
  1432. const char MSG_SD_REMOVED_CZ[] PROGMEM = "Karta vyjmuta";
  1433. const char * const MSG_SD_REMOVED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1434. MSG_SD_REMOVED_EN,
  1435. MSG_SD_REMOVED_CZ
  1436. };
  1437. const char MSG_SD_SIZE_EN[] PROGMEM = " Size: ";
  1438. const char * const MSG_SD_SIZE_LANG_TABLE[1] PROGMEM = {
  1439. MSG_SD_SIZE_EN
  1440. };
  1441. const char MSG_SD_VOL_INIT_FAIL_EN[] PROGMEM = "volume.init failed";
  1442. const char * const MSG_SD_VOL_INIT_FAIL_LANG_TABLE[1] PROGMEM = {
  1443. MSG_SD_VOL_INIT_FAIL_EN
  1444. };
  1445. const char MSG_SD_WORKDIR_FAIL_EN[] PROGMEM = "workDir open failed";
  1446. const char * const MSG_SD_WORKDIR_FAIL_LANG_TABLE[1] PROGMEM = {
  1447. MSG_SD_WORKDIR_FAIL_EN
  1448. };
  1449. const char MSG_SD_WRITE_TO_FILE_EN[] PROGMEM = "Writing to file: ";
  1450. const char * const MSG_SD_WRITE_TO_FILE_LANG_TABLE[1] PROGMEM = {
  1451. MSG_SD_WRITE_TO_FILE_EN
  1452. };
  1453. const char MSG_SECOND_SERIAL_OFF_EN[] PROGMEM = "RPi port [off]";
  1454. const char MSG_SECOND_SERIAL_OFF_CZ[] PROGMEM = "RPi port [vyp]";
  1455. const char * const MSG_SECOND_SERIAL_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  1456. MSG_SECOND_SERIAL_OFF_EN,
  1457. MSG_SECOND_SERIAL_OFF_CZ
  1458. };
  1459. const char MSG_SECOND_SERIAL_ON_EN[] PROGMEM = "RPi port [on]";
  1460. const char MSG_SECOND_SERIAL_ON_CZ[] PROGMEM = "RPi port [zap]";
  1461. const char * const MSG_SECOND_SERIAL_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  1462. MSG_SECOND_SERIAL_ON_EN,
  1463. MSG_SECOND_SERIAL_ON_CZ
  1464. };
  1465. const char MSG_SELFTEST_EN[] PROGMEM = "Selftest ";
  1466. const char * const MSG_SELFTEST_LANG_TABLE[1] PROGMEM = {
  1467. MSG_SELFTEST_EN
  1468. };
  1469. const char MSG_SELFTEST_AXIS_EN[] PROGMEM = "Axis";
  1470. const char MSG_SELFTEST_AXIS_CZ[] PROGMEM = "Osa";
  1471. const char * const MSG_SELFTEST_AXIS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1472. MSG_SELFTEST_AXIS_EN,
  1473. MSG_SELFTEST_AXIS_CZ
  1474. };
  1475. const char MSG_SELFTEST_AXIS_LENGTH_EN[] PROGMEM = "Axis length";
  1476. const char MSG_SELFTEST_AXIS_LENGTH_CZ[] PROGMEM = "Delka osy";
  1477. const char * const MSG_SELFTEST_AXIS_LENGTH_LANG_TABLE[LANG_NUM] PROGMEM = {
  1478. MSG_SELFTEST_AXIS_LENGTH_EN,
  1479. MSG_SELFTEST_AXIS_LENGTH_CZ
  1480. };
  1481. const char MSG_SELFTEST_BEDHEATER_EN[] PROGMEM = "Bed / Heater";
  1482. const char * const MSG_SELFTEST_BEDHEATER_LANG_TABLE[1] PROGMEM = {
  1483. MSG_SELFTEST_BEDHEATER_EN
  1484. };
  1485. const char MSG_SELFTEST_CHECK_ALLCORRECT_EN[] PROGMEM = "All correct ";
  1486. const char MSG_SELFTEST_CHECK_ALLCORRECT_CZ[] PROGMEM = "Vse OK ";
  1487. const char * const MSG_SELFTEST_CHECK_ALLCORRECT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1488. MSG_SELFTEST_CHECK_ALLCORRECT_EN,
  1489. MSG_SELFTEST_CHECK_ALLCORRECT_CZ
  1490. };
  1491. const char MSG_SELFTEST_CHECK_BED_EN[] PROGMEM = "Checking bed ";
  1492. const char MSG_SELFTEST_CHECK_BED_CZ[] PROGMEM = "Kontrola bed ";
  1493. const char * const MSG_SELFTEST_CHECK_BED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1494. MSG_SELFTEST_CHECK_BED_EN,
  1495. MSG_SELFTEST_CHECK_BED_CZ
  1496. };
  1497. const char MSG_SELFTEST_CHECK_ENDSTOPS_EN[] PROGMEM = "Checking endstops";
  1498. const char MSG_SELFTEST_CHECK_ENDSTOPS_CZ[] PROGMEM = "Kontrola endstops";
  1499. const char * const MSG_SELFTEST_CHECK_ENDSTOPS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1500. MSG_SELFTEST_CHECK_ENDSTOPS_EN,
  1501. MSG_SELFTEST_CHECK_ENDSTOPS_CZ
  1502. };
  1503. const char MSG_SELFTEST_CHECK_FSENSOR_EN[] PROGMEM = "Checking sensors ";
  1504. const char MSG_SELFTEST_CHECK_FSENSOR_CZ[] PROGMEM = "Kontrola senzoru";
  1505. const char * const MSG_SELFTEST_CHECK_FSENSOR_LANG_TABLE[LANG_NUM] PROGMEM = {
  1506. MSG_SELFTEST_CHECK_FSENSOR_EN,
  1507. MSG_SELFTEST_CHECK_FSENSOR_CZ
  1508. };
  1509. const char MSG_SELFTEST_CHECK_HOTEND_EN[] PROGMEM = "Checking hotend ";
  1510. const char MSG_SELFTEST_CHECK_HOTEND_CZ[] PROGMEM = "Kontrola hotend ";
  1511. const char * const MSG_SELFTEST_CHECK_HOTEND_LANG_TABLE[LANG_NUM] PROGMEM = {
  1512. MSG_SELFTEST_CHECK_HOTEND_EN,
  1513. MSG_SELFTEST_CHECK_HOTEND_CZ
  1514. };
  1515. const char MSG_SELFTEST_CHECK_X_EN[] PROGMEM = "Checking X axis ";
  1516. const char MSG_SELFTEST_CHECK_X_CZ[] PROGMEM = "Kontrola X axis ";
  1517. const char * const MSG_SELFTEST_CHECK_X_LANG_TABLE[LANG_NUM] PROGMEM = {
  1518. MSG_SELFTEST_CHECK_X_EN,
  1519. MSG_SELFTEST_CHECK_X_CZ
  1520. };
  1521. const char MSG_SELFTEST_CHECK_Y_EN[] PROGMEM = "Checking Y axis ";
  1522. const char MSG_SELFTEST_CHECK_Y_CZ[] PROGMEM = "Kontrola Y axis ";
  1523. const char * const MSG_SELFTEST_CHECK_Y_LANG_TABLE[LANG_NUM] PROGMEM = {
  1524. MSG_SELFTEST_CHECK_Y_EN,
  1525. MSG_SELFTEST_CHECK_Y_CZ
  1526. };
  1527. const char MSG_SELFTEST_CHECK_Z_EN[] PROGMEM = "Checking Z axis ";
  1528. const char MSG_SELFTEST_CHECK_Z_CZ[] PROGMEM = "Kontrola Z axis ";
  1529. const char * const MSG_SELFTEST_CHECK_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
  1530. MSG_SELFTEST_CHECK_Z_EN,
  1531. MSG_SELFTEST_CHECK_Z_CZ
  1532. };
  1533. const char MSG_SELFTEST_COOLING_FAN_EN[] PROGMEM = "Front print fan?";
  1534. const char MSG_SELFTEST_COOLING_FAN_CZ[] PROGMEM = "Predni tiskovy vent?";
  1535. const char * const MSG_SELFTEST_COOLING_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
  1536. MSG_SELFTEST_COOLING_FAN_EN,
  1537. MSG_SELFTEST_COOLING_FAN_CZ
  1538. };
  1539. const char MSG_SELFTEST_ENDSTOP_EN[] PROGMEM = "Endstop";
  1540. const char * const MSG_SELFTEST_ENDSTOP_LANG_TABLE[1] PROGMEM = {
  1541. MSG_SELFTEST_ENDSTOP_EN
  1542. };
  1543. const char MSG_SELFTEST_ENDSTOPS_EN[] PROGMEM = "Endstops";
  1544. const char * const MSG_SELFTEST_ENDSTOPS_LANG_TABLE[1] PROGMEM = {
  1545. MSG_SELFTEST_ENDSTOPS_EN
  1546. };
  1547. const char MSG_SELFTEST_ENDSTOP_NOTHIT_EN[] PROGMEM = "Endstop not hit";
  1548. const char * const MSG_SELFTEST_ENDSTOP_NOTHIT_LANG_TABLE[1] PROGMEM = {
  1549. MSG_SELFTEST_ENDSTOP_NOTHIT_EN
  1550. };
  1551. const char MSG_SELFTEST_ERROR_EN[] PROGMEM = "Selftest error !";
  1552. const char * const MSG_SELFTEST_ERROR_LANG_TABLE[1] PROGMEM = {
  1553. MSG_SELFTEST_ERROR_EN
  1554. };
  1555. const char MSG_SELFTEST_EXTRUDER_FAN_EN[] PROGMEM = "Left hotend fan?";
  1556. const char MSG_SELFTEST_EXTRUDER_FAN_CZ[] PROGMEM = "Levy vent na trysce?";
  1557. const char * const MSG_SELFTEST_EXTRUDER_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
  1558. MSG_SELFTEST_EXTRUDER_FAN_EN,
  1559. MSG_SELFTEST_EXTRUDER_FAN_CZ
  1560. };
  1561. const char MSG_SELFTEST_EXTRUDER_FAN_SPEED_EN[] PROGMEM = "Extruder fan:";
  1562. const char MSG_SELFTEST_EXTRUDER_FAN_SPEED_CZ[] PROGMEM = "Levy vent.:";
  1563. const char * const MSG_SELFTEST_EXTRUDER_FAN_SPEED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1564. MSG_SELFTEST_EXTRUDER_FAN_SPEED_EN,
  1565. MSG_SELFTEST_EXTRUDER_FAN_SPEED_CZ
  1566. };
  1567. const char MSG_SELFTEST_FAILED_EN[] PROGMEM = "Selftest failed ";
  1568. const char MSG_SELFTEST_FAILED_CZ[] PROGMEM = "Selftest selhal ";
  1569. const char * const MSG_SELFTEST_FAILED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1570. MSG_SELFTEST_FAILED_EN,
  1571. MSG_SELFTEST_FAILED_CZ
  1572. };
  1573. const char MSG_SELFTEST_FAN_EN[] PROGMEM = "Fan test";
  1574. const char MSG_SELFTEST_FAN_CZ[] PROGMEM = "Test ventilatoru";
  1575. const char * const MSG_SELFTEST_FAN_LANG_TABLE[LANG_NUM] PROGMEM = {
  1576. MSG_SELFTEST_FAN_EN,
  1577. MSG_SELFTEST_FAN_CZ
  1578. };
  1579. const char MSG_SELFTEST_FANS_EN[] PROGMEM = "Front/left fans";
  1580. const char MSG_SELFTEST_FANS_CZ[] PROGMEM = "Predni/levy vent.";
  1581. const char * const MSG_SELFTEST_FANS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1582. MSG_SELFTEST_FANS_EN,
  1583. MSG_SELFTEST_FANS_CZ
  1584. };
  1585. const char MSG_SELFTEST_FAN_NO_EN[] PROGMEM = "Not spinning";
  1586. const char MSG_SELFTEST_FAN_NO_CZ[] PROGMEM = "Netoci se";
  1587. const char * const MSG_SELFTEST_FAN_NO_LANG_TABLE[LANG_NUM] PROGMEM = {
  1588. MSG_SELFTEST_FAN_NO_EN,
  1589. MSG_SELFTEST_FAN_NO_CZ
  1590. };
  1591. const char MSG_SELFTEST_FAN_YES_EN[] PROGMEM = "Spinning";
  1592. const char MSG_SELFTEST_FAN_YES_CZ[] PROGMEM = "Toci se";
  1593. const char * const MSG_SELFTEST_FAN_YES_LANG_TABLE[LANG_NUM] PROGMEM = {
  1594. MSG_SELFTEST_FAN_YES_EN,
  1595. MSG_SELFTEST_FAN_YES_CZ
  1596. };
  1597. const char MSG_SELFTEST_FILAMENT_SENSOR_EN[] PROGMEM = "Filament sensor:";
  1598. const char MSG_SELFTEST_FILAMENT_SENSOR_CZ[] PROGMEM = "Senzor filamentu:";
  1599. const char * const MSG_SELFTEST_FILAMENT_SENSOR_LANG_TABLE[LANG_NUM] PROGMEM = {
  1600. MSG_SELFTEST_FILAMENT_SENSOR_EN,
  1601. MSG_SELFTEST_FILAMENT_SENSOR_CZ
  1602. };
  1603. const char MSG_SELFTEST_HEATERTHERMISTOR_EN[] PROGMEM = "Heater/Thermistor";
  1604. const char * const MSG_SELFTEST_HEATERTHERMISTOR_LANG_TABLE[1] PROGMEM = {
  1605. MSG_SELFTEST_HEATERTHERMISTOR_EN
  1606. };
  1607. const char MSG_SELFTEST_MOTOR_EN[] PROGMEM = "Motor";
  1608. const char * const MSG_SELFTEST_MOTOR_LANG_TABLE[1] PROGMEM = {
  1609. MSG_SELFTEST_MOTOR_EN
  1610. };
  1611. const char MSG_SELFTEST_NOTCONNECTED_EN[] PROGMEM = "Not connected";
  1612. const char MSG_SELFTEST_NOTCONNECTED_CZ[] PROGMEM = "Nezapojeno ";
  1613. const char * const MSG_SELFTEST_NOTCONNECTED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1614. MSG_SELFTEST_NOTCONNECTED_EN,
  1615. MSG_SELFTEST_NOTCONNECTED_CZ
  1616. };
  1617. const char MSG_SELFTEST_OK_EN[] PROGMEM = "Self test OK";
  1618. const char * const MSG_SELFTEST_OK_LANG_TABLE[1] PROGMEM = {
  1619. MSG_SELFTEST_OK_EN
  1620. };
  1621. const char MSG_SELFTEST_PLEASECHECK_EN[] PROGMEM = "Please check :";
  1622. const char MSG_SELFTEST_PLEASECHECK_CZ[] PROGMEM = "Zkontrolujte :";
  1623. const char * const MSG_SELFTEST_PLEASECHECK_LANG_TABLE[LANG_NUM] PROGMEM = {
  1624. MSG_SELFTEST_PLEASECHECK_EN,
  1625. MSG_SELFTEST_PLEASECHECK_CZ
  1626. };
  1627. const char MSG_SELFTEST_PRINT_FAN_SPEED_EN[] PROGMEM = "Print fan:";
  1628. const char MSG_SELFTEST_PRINT_FAN_SPEED_CZ[] PROGMEM = "Tiskovy vent.:";
  1629. const char * const MSG_SELFTEST_PRINT_FAN_SPEED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1630. MSG_SELFTEST_PRINT_FAN_SPEED_EN,
  1631. MSG_SELFTEST_PRINT_FAN_SPEED_CZ
  1632. };
  1633. const char MSG_SELFTEST_START_EN[] PROGMEM = "Self test start ";
  1634. const char * const MSG_SELFTEST_START_LANG_TABLE[1] PROGMEM = {
  1635. MSG_SELFTEST_START_EN
  1636. };
  1637. const char MSG_SELFTEST_SWAPPED_EN[] PROGMEM = "Swapped";
  1638. const char MSG_SELFTEST_SWAPPED_CZ[] PROGMEM = "Prohozene";
  1639. const char * const MSG_SELFTEST_SWAPPED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1640. MSG_SELFTEST_SWAPPED_EN,
  1641. MSG_SELFTEST_SWAPPED_CZ
  1642. };
  1643. const char MSG_SELFTEST_WIRINGERROR_EN[] PROGMEM = "Wiring error";
  1644. const char MSG_SELFTEST_WIRINGERROR_CZ[] PROGMEM = "Chyba zapojeni";
  1645. const char * const MSG_SELFTEST_WIRINGERROR_LANG_TABLE[LANG_NUM] PROGMEM = {
  1646. MSG_SELFTEST_WIRINGERROR_EN,
  1647. MSG_SELFTEST_WIRINGERROR_CZ
  1648. };
  1649. const char MSG_SERIAL_ERROR_MENU_STRUCTURE_EN[] PROGMEM = "Error in menu structure";
  1650. const char * const MSG_SERIAL_ERROR_MENU_STRUCTURE_LANG_TABLE[1] PROGMEM = {
  1651. MSG_SERIAL_ERROR_MENU_STRUCTURE_EN
  1652. };
  1653. const char MSG_SETTINGS_EN[] PROGMEM = "Settings";
  1654. const char MSG_SETTINGS_CZ[] PROGMEM = "Nastaveni";
  1655. const char * const MSG_SETTINGS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1656. MSG_SETTINGS_EN,
  1657. MSG_SETTINGS_CZ
  1658. };
  1659. const char MSG_SET_HOME_OFFSETS_EN[] PROGMEM = "Set home offsets";
  1660. const char * const MSG_SET_HOME_OFFSETS_LANG_TABLE[1] PROGMEM = {
  1661. MSG_SET_HOME_OFFSETS_EN
  1662. };
  1663. const char MSG_SET_ORIGIN_EN[] PROGMEM = "Set origin";
  1664. const char * const MSG_SET_ORIGIN_LANG_TABLE[1] PROGMEM = {
  1665. MSG_SET_ORIGIN_EN
  1666. };
  1667. const char MSG_SET_TEMPERATURE_EN[] PROGMEM = "Set temperature:";
  1668. const char MSG_SET_TEMPERATURE_CZ[] PROGMEM = "Nastavte teplotu:";
  1669. const char * const MSG_SET_TEMPERATURE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1670. MSG_SET_TEMPERATURE_EN,
  1671. MSG_SET_TEMPERATURE_CZ
  1672. };
  1673. const char MSG_SEVERE_SKEW_EN[] PROGMEM = "Severe skew:";
  1674. const char MSG_SEVERE_SKEW_CZ[] PROGMEM = "Tezke zkoseni:";
  1675. const char * const MSG_SEVERE_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
  1676. MSG_SEVERE_SKEW_EN,
  1677. MSG_SEVERE_SKEW_CZ
  1678. };
  1679. const char MSG_SHOW_END_STOPS_EN[] PROGMEM = "Show end stops";
  1680. const char MSG_SHOW_END_STOPS_CZ[] PROGMEM = "Stav konc. spin.";
  1681. const char * const MSG_SHOW_END_STOPS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1682. MSG_SHOW_END_STOPS_EN,
  1683. MSG_SHOW_END_STOPS_CZ
  1684. };
  1685. const char MSG_SILENT_MODE_OFF_EN[] PROGMEM = "Mode [high power]";
  1686. const char MSG_SILENT_MODE_OFF_CZ[] PROGMEM = "Mod [vys. vykon]";
  1687. const char * const MSG_SILENT_MODE_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  1688. MSG_SILENT_MODE_OFF_EN,
  1689. MSG_SILENT_MODE_OFF_CZ
  1690. };
  1691. const char MSG_SILENT_MODE_ON_EN[] PROGMEM = "Mode [silent]";
  1692. const char MSG_SILENT_MODE_ON_CZ[] PROGMEM = "Mod [tichy]";
  1693. const char * const MSG_SILENT_MODE_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  1694. MSG_SILENT_MODE_ON_EN,
  1695. MSG_SILENT_MODE_ON_CZ
  1696. };
  1697. const char MSG_SLIGHT_SKEW_EN[] PROGMEM = "Slight skew:";
  1698. const char MSG_SLIGHT_SKEW_CZ[] PROGMEM = "Lehke zkoseni:";
  1699. const char * const MSG_SLIGHT_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
  1700. MSG_SLIGHT_SKEW_EN,
  1701. MSG_SLIGHT_SKEW_CZ
  1702. };
  1703. const char MSG_SOFTWARE_RESET_EN[] PROGMEM = " Software Reset";
  1704. const char * const MSG_SOFTWARE_RESET_LANG_TABLE[1] PROGMEM = {
  1705. MSG_SOFTWARE_RESET_EN
  1706. };
  1707. const char MSG_SORTING_EN[] PROGMEM = "Sorting files";
  1708. const char MSG_SORTING_CZ[] PROGMEM = "Trideni souboru";
  1709. const char * const MSG_SORTING_LANG_TABLE[LANG_NUM] PROGMEM = {
  1710. MSG_SORTING_EN,
  1711. MSG_SORTING_CZ
  1712. };
  1713. const char MSG_SORT_ALPHA_EN[] PROGMEM = "Sort: [Alphabet]";
  1714. const char MSG_SORT_ALPHA_CZ[] PROGMEM = "Trideni [Abeceda]";
  1715. const char * const MSG_SORT_ALPHA_LANG_TABLE[LANG_NUM] PROGMEM = {
  1716. MSG_SORT_ALPHA_EN,
  1717. MSG_SORT_ALPHA_CZ
  1718. };
  1719. const char MSG_SORT_NONE_EN[] PROGMEM = "Sort: [None]";
  1720. const char MSG_SORT_NONE_CZ[] PROGMEM = "Trideni [Zadne]";
  1721. const char * const MSG_SORT_NONE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1722. MSG_SORT_NONE_EN,
  1723. MSG_SORT_NONE_CZ
  1724. };
  1725. const char MSG_SORT_TIME_EN[] PROGMEM = "Sort: [Time]";
  1726. const char MSG_SORT_TIME_CZ[] PROGMEM = "Trideni [Cas]";
  1727. const char * const MSG_SORT_TIME_LANG_TABLE[LANG_NUM] PROGMEM = {
  1728. MSG_SORT_TIME_EN,
  1729. MSG_SORT_TIME_CZ
  1730. };
  1731. const char MSG_SPEED_EN[] PROGMEM = "Speed";
  1732. const char MSG_SPEED_CZ[] PROGMEM = "Rychlost";
  1733. const char * const MSG_SPEED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1734. MSG_SPEED_EN,
  1735. MSG_SPEED_CZ
  1736. };
  1737. const char MSG_STACK_ERROR_EN[] PROGMEM = "Error - static memory has been overwritten";
  1738. const char MSG_STACK_ERROR_CZ[] PROGMEM = "Chyba - Doslo k prepisu staticke pameti!";
  1739. const char * const MSG_STACK_ERROR_LANG_TABLE[LANG_NUM] PROGMEM = {
  1740. MSG_STACK_ERROR_EN,
  1741. MSG_STACK_ERROR_CZ
  1742. };
  1743. const char MSG_STATISTICS_EN[] PROGMEM = "Statistics ";
  1744. const char MSG_STATISTICS_CZ[] PROGMEM = "Statistika ";
  1745. const char * const MSG_STATISTICS_LANG_TABLE[LANG_NUM] PROGMEM = {
  1746. MSG_STATISTICS_EN,
  1747. MSG_STATISTICS_CZ
  1748. };
  1749. const char MSG_STATS_FILAMENTUSED_EN[] PROGMEM = "Filament used: ";
  1750. const char MSG_STATS_FILAMENTUSED_CZ[] PROGMEM = "Filament : ";
  1751. const char * const MSG_STATS_FILAMENTUSED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1752. MSG_STATS_FILAMENTUSED_EN,
  1753. MSG_STATS_FILAMENTUSED_CZ
  1754. };
  1755. const char MSG_STATS_PRINTTIME_EN[] PROGMEM = "Print time: ";
  1756. const char MSG_STATS_PRINTTIME_CZ[] PROGMEM = "Cas tisku : ";
  1757. const char * const MSG_STATS_PRINTTIME_LANG_TABLE[LANG_NUM] PROGMEM = {
  1758. MSG_STATS_PRINTTIME_EN,
  1759. MSG_STATS_PRINTTIME_CZ
  1760. };
  1761. const char MSG_STATS_TOTALFILAMENT_EN[] PROGMEM = "Total filament :";
  1762. const char MSG_STATS_TOTALFILAMENT_CZ[] PROGMEM = "Filament celkem :";
  1763. const char * const MSG_STATS_TOTALFILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1764. MSG_STATS_TOTALFILAMENT_EN,
  1765. MSG_STATS_TOTALFILAMENT_CZ
  1766. };
  1767. const char MSG_STATS_TOTALPRINTTIME_EN[] PROGMEM = "Total print time :";
  1768. const char MSG_STATS_TOTALPRINTTIME_CZ[] PROGMEM = "Celkovy cas :";
  1769. const char * const MSG_STATS_TOTALPRINTTIME_LANG_TABLE[LANG_NUM] PROGMEM = {
  1770. MSG_STATS_TOTALPRINTTIME_EN,
  1771. MSG_STATS_TOTALPRINTTIME_CZ
  1772. };
  1773. const char MSG_STEALTH_MODE_OFF_EN[] PROGMEM = "Mode [Normal]";
  1774. const char MSG_STEALTH_MODE_OFF_CZ[] PROGMEM = "Mod [Normal]";
  1775. const char * const MSG_STEALTH_MODE_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  1776. MSG_STEALTH_MODE_OFF_EN,
  1777. MSG_STEALTH_MODE_OFF_CZ
  1778. };
  1779. const char MSG_STEALTH_MODE_ON_EN[] PROGMEM = "Mode [Stealth]";
  1780. const char MSG_STEALTH_MODE_ON_CZ[] PROGMEM = "Mod [Stealth]";
  1781. const char * const MSG_STEALTH_MODE_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  1782. MSG_STEALTH_MODE_ON_EN,
  1783. MSG_STEALTH_MODE_ON_CZ
  1784. };
  1785. const char MSG_STEEL_SHEET_CHECK_EN[] PROGMEM = "Is steel sheet on heatbed?";
  1786. const char MSG_STEEL_SHEET_CHECK_CZ[] PROGMEM = "Je tiskovy plat na heatbed?";
  1787. const char * const MSG_STEEL_SHEET_CHECK_LANG_TABLE[LANG_NUM] PROGMEM = {
  1788. MSG_STEEL_SHEET_CHECK_EN,
  1789. MSG_STEEL_SHEET_CHECK_CZ
  1790. };
  1791. const char MSG_STEPPER_TIMER_OVERFLOW_ERROR_EN[] PROGMEM = "Error - stepper timer overflow";
  1792. const char * const MSG_STEPPER_TIMER_OVERFLOW_ERROR_LANG_TABLE[1] PROGMEM = {
  1793. MSG_STEPPER_TIMER_OVERFLOW_ERROR_EN
  1794. };
  1795. const char MSG_STEPPER_TOO_HIGH_EN[] PROGMEM = "Steprate too high: ";
  1796. const char * const MSG_STEPPER_TOO_HIGH_LANG_TABLE[1] PROGMEM = {
  1797. MSG_STEPPER_TOO_HIGH_EN
  1798. };
  1799. const char MSG_STOPPED_EN[] PROGMEM = "STOPPED. ";
  1800. const char * const MSG_STOPPED_LANG_TABLE[1] PROGMEM = {
  1801. MSG_STOPPED_EN
  1802. };
  1803. const char MSG_STOP_PRINT_EN[] PROGMEM = "Stop print";
  1804. const char MSG_STOP_PRINT_CZ[] PROGMEM = "Zastavit tisk";
  1805. const char * const MSG_STOP_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1806. MSG_STOP_PRINT_EN,
  1807. MSG_STOP_PRINT_CZ
  1808. };
  1809. const char MSG_STORE_EPROM_EN[] PROGMEM = "Store memory";
  1810. const char * const MSG_STORE_EPROM_LANG_TABLE[1] PROGMEM = {
  1811. MSG_STORE_EPROM_EN
  1812. };
  1813. const char MSG_SUPPORT_EN[] PROGMEM = "Support";
  1814. const char MSG_SUPPORT_CZ[] PROGMEM = "Podpora";
  1815. const char * const MSG_SUPPORT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1816. MSG_SUPPORT_EN,
  1817. MSG_SUPPORT_CZ
  1818. };
  1819. const char MSG_SWITCH_PS_OFF_EN[] PROGMEM = "Switch power off";
  1820. const char MSG_SWITCH_PS_OFF_CZ[] PROGMEM = "Zapnout zdroj";
  1821. const char * const MSG_SWITCH_PS_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  1822. MSG_SWITCH_PS_OFF_EN,
  1823. MSG_SWITCH_PS_OFF_CZ
  1824. };
  1825. const char MSG_SWITCH_PS_ON_EN[] PROGMEM = "Switch power on";
  1826. const char MSG_SWITCH_PS_ON_CZ[] PROGMEM = "Vypnout zdroj";
  1827. const char * const MSG_SWITCH_PS_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  1828. MSG_SWITCH_PS_ON_EN,
  1829. MSG_SWITCH_PS_ON_CZ
  1830. };
  1831. const char MSG_TAKE_EFFECT_EN[] PROGMEM = " for take effect";
  1832. const char MSG_TAKE_EFFECT_CZ[] PROGMEM = " pro projeveni zmen";
  1833. const char * const MSG_TAKE_EFFECT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1834. MSG_TAKE_EFFECT_EN,
  1835. MSG_TAKE_EFFECT_CZ
  1836. };
  1837. const char MSG_TEMPERATURE_EN[] PROGMEM = "Temperature";
  1838. const char MSG_TEMPERATURE_CZ[] PROGMEM = "Teplota";
  1839. const char * const MSG_TEMPERATURE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1840. MSG_TEMPERATURE_EN,
  1841. MSG_TEMPERATURE_CZ
  1842. };
  1843. const char MSG_TEMP_CALIBRATION_EN[] PROGMEM = "Temp. cal. ";
  1844. const char MSG_TEMP_CALIBRATION_CZ[] PROGMEM = "Tepl. kal. ";
  1845. const char * const MSG_TEMP_CALIBRATION_LANG_TABLE[LANG_NUM] PROGMEM = {
  1846. MSG_TEMP_CALIBRATION_EN,
  1847. MSG_TEMP_CALIBRATION_CZ
  1848. };
  1849. const char MSG_TEMP_CALIBRATION_DONE_EN[] PROGMEM = "Temperature calibration is finished. Click to continue.";
  1850. const char MSG_TEMP_CALIBRATION_DONE_CZ[] PROGMEM = "Teplotni kalibrace dokoncena. Pokracujte stiskem tlacitka.";
  1851. const char * const MSG_TEMP_CALIBRATION_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1852. MSG_TEMP_CALIBRATION_DONE_EN,
  1853. MSG_TEMP_CALIBRATION_DONE_CZ
  1854. };
  1855. const char MSG_TEMP_CALIBRATION_OFF_EN[] PROGMEM = "Temp. cal. [off]";
  1856. const char MSG_TEMP_CALIBRATION_OFF_CZ[] PROGMEM = "Tepl. kal. [vyp]";
  1857. const char * const MSG_TEMP_CALIBRATION_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
  1858. MSG_TEMP_CALIBRATION_OFF_EN,
  1859. MSG_TEMP_CALIBRATION_OFF_CZ
  1860. };
  1861. const char MSG_TEMP_CALIBRATION_ON_EN[] PROGMEM = "Temp. cal. [on]";
  1862. const char MSG_TEMP_CALIBRATION_ON_CZ[] PROGMEM = "Tepl. kal. [zap]";
  1863. const char * const MSG_TEMP_CALIBRATION_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
  1864. MSG_TEMP_CALIBRATION_ON_EN,
  1865. MSG_TEMP_CALIBRATION_ON_CZ
  1866. };
  1867. const char MSG_TEMP_CAL_WARNING_EN[] PROGMEM = "Stable ambient temperature 21-26C is needed a rigid stand is required.";
  1868. const char * const MSG_TEMP_CAL_WARNING_LANG_TABLE[1] PROGMEM = {
  1869. MSG_TEMP_CAL_WARNING_EN
  1870. };
  1871. const char MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF_EN[] PROGMEM = "SD card [normal]";
  1872. const char * const MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF_LANG_TABLE[1] PROGMEM = {
  1873. MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF_EN
  1874. };
  1875. const char MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON_EN[] PROGMEM = "SD card [FlshAir]";
  1876. const char * const MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON_LANG_TABLE[1] PROGMEM = {
  1877. MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON_EN
  1878. };
  1879. const char MSG_TUNE_EN[] PROGMEM = "Tune";
  1880. const char MSG_TUNE_CZ[] PROGMEM = "Ladit";
  1881. const char * const MSG_TUNE_LANG_TABLE[LANG_NUM] PROGMEM = {
  1882. MSG_TUNE_EN,
  1883. MSG_TUNE_CZ
  1884. };
  1885. const char MSG_UNKNOWN_COMMAND_EN[] PROGMEM = "Unknown command: \"";
  1886. const char * const MSG_UNKNOWN_COMMAND_LANG_TABLE[1] PROGMEM = {
  1887. MSG_UNKNOWN_COMMAND_EN
  1888. };
  1889. const char MSG_UNLOADING_FILAMENT_EN[] PROGMEM = "Unloading filament";
  1890. const char MSG_UNLOADING_FILAMENT_CZ[] PROGMEM = "Vysouvam filament";
  1891. const char * const MSG_UNLOADING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1892. MSG_UNLOADING_FILAMENT_EN,
  1893. MSG_UNLOADING_FILAMENT_CZ
  1894. };
  1895. const char MSG_UNLOAD_ALL_EN[] PROGMEM = "Unload all";
  1896. const char MSG_UNLOAD_ALL_CZ[] PROGMEM = "Vyjmout vse";
  1897. const char * const MSG_UNLOAD_ALL_LANG_TABLE[LANG_NUM] PROGMEM = {
  1898. MSG_UNLOAD_ALL_EN,
  1899. MSG_UNLOAD_ALL_CZ
  1900. };
  1901. const char MSG_UNLOAD_FILAMENT_EN[] PROGMEM = "Unload filament";
  1902. const char MSG_UNLOAD_FILAMENT_CZ[] PROGMEM = "Vyjmout filament";
  1903. const char * const MSG_UNLOAD_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  1904. MSG_UNLOAD_FILAMENT_EN,
  1905. MSG_UNLOAD_FILAMENT_CZ
  1906. };
  1907. const char MSG_UNLOAD_FILAMENT_1_EN[] PROGMEM = "Unload filament 1";
  1908. const char MSG_UNLOAD_FILAMENT_1_CZ[] PROGMEM = "Vyjmout filam. 1";
  1909. const char * const MSG_UNLOAD_FILAMENT_1_LANG_TABLE[LANG_NUM] PROGMEM = {
  1910. MSG_UNLOAD_FILAMENT_1_EN,
  1911. MSG_UNLOAD_FILAMENT_1_CZ
  1912. };
  1913. const char MSG_UNLOAD_FILAMENT_2_EN[] PROGMEM = "Unload filament 2";
  1914. const char MSG_UNLOAD_FILAMENT_2_CZ[] PROGMEM = "Vyjmout filam. 2";
  1915. const char * const MSG_UNLOAD_FILAMENT_2_LANG_TABLE[LANG_NUM] PROGMEM = {
  1916. MSG_UNLOAD_FILAMENT_2_EN,
  1917. MSG_UNLOAD_FILAMENT_2_CZ
  1918. };
  1919. const char MSG_UNLOAD_FILAMENT_3_EN[] PROGMEM = "Unload filament 3";
  1920. const char MSG_UNLOAD_FILAMENT_3_CZ[] PROGMEM = "Vyjmout filam. 3";
  1921. const char * const MSG_UNLOAD_FILAMENT_3_LANG_TABLE[LANG_NUM] PROGMEM = {
  1922. MSG_UNLOAD_FILAMENT_3_EN,
  1923. MSG_UNLOAD_FILAMENT_3_CZ
  1924. };
  1925. const char MSG_UNLOAD_FILAMENT_4_EN[] PROGMEM = "Unload filament 4";
  1926. const char MSG_UNLOAD_FILAMENT_4_CZ[] PROGMEM = "Vyjmout filam. 4";
  1927. const char * const MSG_UNLOAD_FILAMENT_4_LANG_TABLE[LANG_NUM] PROGMEM = {
  1928. MSG_UNLOAD_FILAMENT_4_EN,
  1929. MSG_UNLOAD_FILAMENT_4_CZ
  1930. };
  1931. const char MSG_UNLOAD_SUCCESSFUL_EN[] PROGMEM = "Was filament unload successful?";
  1932. const char MSG_UNLOAD_SUCCESSFUL_CZ[] PROGMEM = "Bylo vysunuti filamentu uspesne?";
  1933. const char * const MSG_UNLOAD_SUCCESSFUL_LANG_TABLE[LANG_NUM] PROGMEM = {
  1934. MSG_UNLOAD_SUCCESSFUL_EN,
  1935. MSG_UNLOAD_SUCCESSFUL_CZ
  1936. };
  1937. const char MSG_USB_PRINTING_EN[] PROGMEM = "USB printing ";
  1938. const char MSG_USB_PRINTING_CZ[] PROGMEM = "Tisk z USB ";
  1939. const char * const MSG_USB_PRINTING_LANG_TABLE[LANG_NUM] PROGMEM = {
  1940. MSG_USB_PRINTING_EN,
  1941. MSG_USB_PRINTING_CZ
  1942. };
  1943. const char MSG_USED_EN[] PROGMEM = "Used during print";
  1944. const char MSG_USED_CZ[] PROGMEM = "Pouzite behem tisku";
  1945. const char * const MSG_USED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1946. MSG_USED_EN,
  1947. MSG_USED_CZ
  1948. };
  1949. const char MSG_USERWAIT_EN[] PROGMEM = "Wait for user...";
  1950. const char * const MSG_USERWAIT_LANG_TABLE[1] PROGMEM = {
  1951. MSG_USERWAIT_EN
  1952. };
  1953. const char MSG_V2_CALIBRATION_EN[] PROGMEM = "First layer cal.";
  1954. const char MSG_V2_CALIBRATION_CZ[] PROGMEM = "Kal. prvni vrstvy";
  1955. const char * const MSG_V2_CALIBRATION_LANG_TABLE[LANG_NUM] PROGMEM = {
  1956. MSG_V2_CALIBRATION_EN,
  1957. MSG_V2_CALIBRATION_CZ
  1958. };
  1959. const char MSG_VMIN_EN[] PROGMEM = "Vmin";
  1960. const char * const MSG_VMIN_LANG_TABLE[1] PROGMEM = {
  1961. MSG_VMIN_EN
  1962. };
  1963. const char MSG_VOLUMETRIC_EN[] PROGMEM = "Filament";
  1964. const char * const MSG_VOLUMETRIC_LANG_TABLE[1] PROGMEM = {
  1965. MSG_VOLUMETRIC_EN
  1966. };
  1967. const char MSG_VOLUMETRIC_ENABLED_EN[] PROGMEM = "E in mm3";
  1968. const char * const MSG_VOLUMETRIC_ENABLED_LANG_TABLE[1] PROGMEM = {
  1969. MSG_VOLUMETRIC_ENABLED_EN
  1970. };
  1971. const char MSG_VTRAV_MIN_EN[] PROGMEM = "VTrav min";
  1972. const char * const MSG_VTRAV_MIN_LANG_TABLE[1] PROGMEM = {
  1973. MSG_VTRAV_MIN_EN
  1974. };
  1975. const char MSG_WAITING_TEMP_EN[] PROGMEM = "Waiting for nozzle and bed cooling";
  1976. const char MSG_WAITING_TEMP_CZ[] PROGMEM = "Cekani na zchladnuti trysky a podlozky.";
  1977. const char * const MSG_WAITING_TEMP_LANG_TABLE[LANG_NUM] PROGMEM = {
  1978. MSG_WAITING_TEMP_EN,
  1979. MSG_WAITING_TEMP_CZ
  1980. };
  1981. const char MSG_WATCH_EN[] PROGMEM = "Info screen";
  1982. const char MSG_WATCH_CZ[] PROGMEM = "Informace";
  1983. const char * const MSG_WATCH_LANG_TABLE[LANG_NUM] PROGMEM = {
  1984. MSG_WATCH_EN,
  1985. MSG_WATCH_CZ
  1986. };
  1987. const char MSG_WATCHDOG_RESET_EN[] PROGMEM = " Watchdog Reset";
  1988. const char * const MSG_WATCHDOG_RESET_LANG_TABLE[1] PROGMEM = {
  1989. MSG_WATCHDOG_RESET_EN
  1990. };
  1991. const char MSG_WIZARD_EN[] PROGMEM = "Wizard";
  1992. const char * const MSG_WIZARD_LANG_TABLE[1] PROGMEM = {
  1993. MSG_WIZARD_EN
  1994. };
  1995. const char MSG_WIZARD_CALIBRATION_FAILED_EN[] PROGMEM = "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer.";
  1996. const char MSG_WIZARD_CALIBRATION_FAILED_CZ[] PROGMEM = "Prosim nahlednete do manualu a opravte problem. Po te obnovte Wizarda rebootovanim tiskarny.";
  1997. const char * const MSG_WIZARD_CALIBRATION_FAILED_LANG_TABLE[LANG_NUM] PROGMEM = {
  1998. MSG_WIZARD_CALIBRATION_FAILED_EN,
  1999. MSG_WIZARD_CALIBRATION_FAILED_CZ
  2000. };
  2001. const char MSG_WIZARD_CLEAN_HEATBED_EN[] PROGMEM = "Please clean heatbed and then press the knob.";
  2002. const char MSG_WIZARD_CLEAN_HEATBED_CZ[] PROGMEM = "Prosim ocistete heatbed a stisknete tlacitko.";
  2003. const char * const MSG_WIZARD_CLEAN_HEATBED_LANG_TABLE[LANG_NUM] PROGMEM = {
  2004. MSG_WIZARD_CLEAN_HEATBED_EN,
  2005. MSG_WIZARD_CLEAN_HEATBED_CZ
  2006. };
  2007. const char MSG_WIZARD_DONE_EN[] PROGMEM = "All is done. Happy printing!";
  2008. const char MSG_WIZARD_DONE_CZ[] PROGMEM = "Vse je hotovo.";
  2009. const char * const MSG_WIZARD_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
  2010. MSG_WIZARD_DONE_EN,
  2011. MSG_WIZARD_DONE_CZ
  2012. };
  2013. const char MSG_WIZARD_FILAMENT_LOADED_EN[] PROGMEM = "Is filament loaded?";
  2014. const char MSG_WIZARD_FILAMENT_LOADED_CZ[] PROGMEM = "Je filament zaveden?";
  2015. const char * const MSG_WIZARD_FILAMENT_LOADED_LANG_TABLE[LANG_NUM] PROGMEM = {
  2016. MSG_WIZARD_FILAMENT_LOADED_EN,
  2017. MSG_WIZARD_FILAMENT_LOADED_CZ
  2018. };
  2019. const char MSG_WIZARD_HEATING_EN[] PROGMEM = "Preheating nozzle. Please wait.";
  2020. const char MSG_WIZARD_HEATING_CZ[] PROGMEM = "Predehrivam trysku. Prosim cekejte.";
  2021. const char * const MSG_WIZARD_HEATING_LANG_TABLE[LANG_NUM] PROGMEM = {
  2022. MSG_WIZARD_HEATING_EN,
  2023. MSG_WIZARD_HEATING_CZ
  2024. };
  2025. const char MSG_WIZARD_INSERT_CORRECT_FILAMENT_EN[] PROGMEM = "Please load PLA filament and then resume Wizard by rebooting the printer.";
  2026. const char MSG_WIZARD_INSERT_CORRECT_FILAMENT_CZ[] PROGMEM = "Prosim zavedte PLA filament a po te obnovte Wizarda stisknutim reset tlacitka.";
  2027. const char * const MSG_WIZARD_INSERT_CORRECT_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  2028. MSG_WIZARD_INSERT_CORRECT_FILAMENT_EN,
  2029. MSG_WIZARD_INSERT_CORRECT_FILAMENT_CZ
  2030. };
  2031. const char MSG_WIZARD_LOAD_FILAMENT_EN[] PROGMEM = "Please insert PLA filament to the extruder, then press knob to load it.";
  2032. const char MSG_WIZARD_LOAD_FILAMENT_CZ[] PROGMEM = "Prosim vlozte PLA filament do extruderu, po te stisknete tlacitko pro zavedeni filamentu.";
  2033. const char * const MSG_WIZARD_LOAD_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  2034. MSG_WIZARD_LOAD_FILAMENT_EN,
  2035. MSG_WIZARD_LOAD_FILAMENT_CZ
  2036. };
  2037. const char MSG_WIZARD_PLA_FILAMENT_EN[] PROGMEM = "Is it PLA filament?";
  2038. const char MSG_WIZARD_PLA_FILAMENT_CZ[] PROGMEM = "Je to PLA filament?";
  2039. const char * const MSG_WIZARD_PLA_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
  2040. MSG_WIZARD_PLA_FILAMENT_EN,
  2041. MSG_WIZARD_PLA_FILAMENT_CZ
  2042. };
  2043. const char MSG_WIZARD_QUIT_EN[] PROGMEM = "You can always resume the Wizard from Calibration -> Wizard.";
  2044. const char MSG_WIZARD_QUIT_CZ[] PROGMEM = "Wizarda muzete kdykoliv znovu spustit z menu Calibration -> Wizard";
  2045. const char * const MSG_WIZARD_QUIT_LANG_TABLE[LANG_NUM] PROGMEM = {
  2046. MSG_WIZARD_QUIT_EN,
  2047. MSG_WIZARD_QUIT_CZ
  2048. };
  2049. const char MSG_WIZARD_REPEAT_V2_CAL_EN[] PROGMEM = "Do you want to repeat last step to readjust distance between nozzle and heatbed?";
  2050. const char MSG_WIZARD_REPEAT_V2_CAL_CZ[] PROGMEM = "Chcete opakovat posledni krok a pozmenit vzdalenost mezi tryskou a heatbed?";
  2051. const char * const MSG_WIZARD_REPEAT_V2_CAL_LANG_TABLE[LANG_NUM] PROGMEM = {
  2052. MSG_WIZARD_REPEAT_V2_CAL_EN,
  2053. MSG_WIZARD_REPEAT_V2_CAL_CZ
  2054. };
  2055. const char MSG_WIZARD_RERUN_EN[] PROGMEM = "Running Wizard will delete current calibration results and start from the beginning. Continue?";
  2056. const char MSG_WIZARD_RERUN_CZ[] PROGMEM = "Spusteni Wizarda vymaze ulozene vysledky vsech kalibraci a spusti kalibracni proces od zacatku. Pokracovat?";
  2057. const char * const MSG_WIZARD_RERUN_LANG_TABLE[LANG_NUM] PROGMEM = {
  2058. MSG_WIZARD_RERUN_EN,
  2059. MSG_WIZARD_RERUN_CZ
  2060. };
  2061. const char MSG_WIZARD_SELFTEST_EN[] PROGMEM = "First, I will run the selftest to check most common assembly problems.";
  2062. const char MSG_WIZARD_SELFTEST_CZ[] PROGMEM = "Nejdriv pomoci selftestu zkontoluji nejcastejsi chyby vznikajici pri sestaveni tiskarny.";
  2063. const char * const MSG_WIZARD_SELFTEST_LANG_TABLE[LANG_NUM] PROGMEM = {
  2064. MSG_WIZARD_SELFTEST_EN,
  2065. MSG_WIZARD_SELFTEST_CZ
  2066. };
  2067. const char MSG_WIZARD_V2_CAL_EN[] PROGMEM = "Now I will calibrate distance between tip of the nozzle and heatbed surface.";
  2068. const char MSG_WIZARD_V2_CAL_CZ[] PROGMEM = "Nyni zkalibruji vzdalenost mezi koncem trysky a povrchem heatbedu.";
  2069. const char * const MSG_WIZARD_V2_CAL_LANG_TABLE[LANG_NUM] PROGMEM = {
  2070. MSG_WIZARD_V2_CAL_EN,
  2071. MSG_WIZARD_V2_CAL_CZ
  2072. };
  2073. const char MSG_WIZARD_V2_CAL_2_EN[] PROGMEM = "I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration.";
  2074. const char MSG_WIZARD_V2_CAL_2_CZ[] PROGMEM = "Zacnu tisknout linku a Vy budete postupne snizovat trysku otacenim tlacitka dokud nedosahnete optimalni vysky. Prohlednete si obrazky v nasi prirucce v kapitole Kalibrace";
  2075. const char * const MSG_WIZARD_V2_CAL_2_LANG_TABLE[LANG_NUM] PROGMEM = {
  2076. MSG_WIZARD_V2_CAL_2_EN,
  2077. MSG_WIZARD_V2_CAL_2_CZ
  2078. };
  2079. const char MSG_WIZARD_WELCOME_EN[] PROGMEM = "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?";
  2080. const char MSG_WIZARD_WELCOME_CZ[] PROGMEM = "Dobry den, jsem vase tiskarna Original Prusa i3. Chcete abych Vas provedla kalibracnim procesem?";
  2081. const char * const MSG_WIZARD_WELCOME_LANG_TABLE[LANG_NUM] PROGMEM = {
  2082. MSG_WIZARD_WELCOME_EN,
  2083. MSG_WIZARD_WELCOME_CZ
  2084. };
  2085. const char MSG_WIZARD_WILL_PREHEAT_EN[] PROGMEM = "Now I will preheat nozzle for PLA.";
  2086. const char MSG_WIZARD_WILL_PREHEAT_CZ[] PROGMEM = "Nyni predehreji trysku pro PLA.";
  2087. const char * const MSG_WIZARD_WILL_PREHEAT_LANG_TABLE[LANG_NUM] PROGMEM = {
  2088. MSG_WIZARD_WILL_PREHEAT_EN,
  2089. MSG_WIZARD_WILL_PREHEAT_CZ
  2090. };
  2091. const char MSG_WIZARD_XYZ_CAL_EN[] PROGMEM = "I will run xyz calibration now. It will take approx. 12 mins.";
  2092. const char MSG_WIZARD_XYZ_CAL_CZ[] PROGMEM = "Nyni provedu xyz kalibraci. Zabere to priblizne 12 min.";
  2093. const char * const MSG_WIZARD_XYZ_CAL_LANG_TABLE[LANG_NUM] PROGMEM = {
  2094. MSG_WIZARD_XYZ_CAL_EN,
  2095. MSG_WIZARD_XYZ_CAL_CZ
  2096. };
  2097. const char MSG_WIZARD_Z_CAL_EN[] PROGMEM = "I will run z calibration now.";
  2098. const char MSG_WIZARD_Z_CAL_CZ[] PROGMEM = "Nyni provedu z kalibraci.";
  2099. const char * const MSG_WIZARD_Z_CAL_LANG_TABLE[LANG_NUM] PROGMEM = {
  2100. MSG_WIZARD_Z_CAL_EN,
  2101. MSG_WIZARD_Z_CAL_CZ
  2102. };
  2103. const char MSG_XYZ_DETAILS_EN[] PROGMEM = "XYZ cal. details";
  2104. const char MSG_XYZ_DETAILS_CZ[] PROGMEM = "Detaily XYZ kal.";
  2105. const char * const MSG_XYZ_DETAILS_LANG_TABLE[LANG_NUM] PROGMEM = {
  2106. MSG_XYZ_DETAILS_EN,
  2107. MSG_XYZ_DETAILS_CZ
  2108. };
  2109. const char MSG_X_MAX_EN[] PROGMEM = "x_max: ";
  2110. const char * const MSG_X_MAX_LANG_TABLE[1] PROGMEM = {
  2111. MSG_X_MAX_EN
  2112. };
  2113. const char MSG_X_MIN_EN[] PROGMEM = "x_min: ";
  2114. const char * const MSG_X_MIN_LANG_TABLE[1] PROGMEM = {
  2115. MSG_X_MIN_EN
  2116. };
  2117. const char MSG_YES_EN[] PROGMEM = "Yes";
  2118. const char MSG_YES_CZ[] PROGMEM = "Ano";
  2119. const char * const MSG_YES_LANG_TABLE[LANG_NUM] PROGMEM = {
  2120. MSG_YES_EN,
  2121. MSG_YES_CZ
  2122. };
  2123. const char MSG_Y_DISTANCE_FROM_MIN_EN[] PROGMEM = "Y distance from min:";
  2124. const char MSG_Y_DISTANCE_FROM_MIN_CZ[] PROGMEM = "Y vzdalenost od min:";
  2125. const char * const MSG_Y_DISTANCE_FROM_MIN_LANG_TABLE[LANG_NUM] PROGMEM = {
  2126. MSG_Y_DISTANCE_FROM_MIN_EN,
  2127. MSG_Y_DISTANCE_FROM_MIN_CZ
  2128. };
  2129. const char MSG_Y_MAX_EN[] PROGMEM = "y_max: ";
  2130. const char * const MSG_Y_MAX_LANG_TABLE[1] PROGMEM = {
  2131. MSG_Y_MAX_EN
  2132. };
  2133. const char MSG_Y_MIN_EN[] PROGMEM = "y_min: ";
  2134. const char * const MSG_Y_MIN_LANG_TABLE[1] PROGMEM = {
  2135. MSG_Y_MIN_EN
  2136. };
  2137. const char MSG_ZPROBE_OUT_EN[] PROGMEM = "Z probe out. bed";
  2138. const char * const MSG_ZPROBE_OUT_LANG_TABLE[1] PROGMEM = {
  2139. MSG_ZPROBE_OUT_EN
  2140. };
  2141. const char MSG_ZPROBE_ZOFFSET_EN[] PROGMEM = "Z Offset";
  2142. const char * const MSG_ZPROBE_ZOFFSET_LANG_TABLE[1] PROGMEM = {
  2143. MSG_ZPROBE_ZOFFSET_EN
  2144. };
  2145. const char MSG_Z_MAX_EN[] PROGMEM = "z_max: ";
  2146. const char * const MSG_Z_MAX_LANG_TABLE[1] PROGMEM = {
  2147. MSG_Z_MAX_EN
  2148. };
  2149. const char MSG_Z_MIN_EN[] PROGMEM = "z_min: ";
  2150. const char * const MSG_Z_MIN_LANG_TABLE[1] PROGMEM = {
  2151. MSG_Z_MIN_EN
  2152. };
  2153. const char WELCOME_MSG_EN[] PROGMEM = CUSTOM_MENDEL_NAME " ready.";
  2154. const char WELCOME_MSG_CZ[] PROGMEM = CUSTOM_MENDEL_NAME " ok";
  2155. const char * const WELCOME_MSG_LANG_TABLE[LANG_NUM] PROGMEM = {
  2156. WELCOME_MSG_EN,
  2157. WELCOME_MSG_CZ
  2158. };
  2159. char langbuffer[LCD_WIDTH+1];
  2160. char* CAT2(const char *s1,const char *s2) {
  2161. unsigned char len=0;
  2162. strncpy_P(langbuffer+len,s1,LCD_WIDTH-len);
  2163. len+=strlen_P(s1);
  2164. strncpy_P(langbuffer+len,s2,LCD_WIDTH-len);
  2165. return langbuffer;
  2166. }
  2167. char* CAT4(const char *s1,const char *s2,const char *s3,const char *s4) {
  2168. unsigned char len=0;
  2169. strncpy_P(langbuffer+len,s1,LCD_WIDTH-len);
  2170. len+=strlen_P(s1);
  2171. strncpy_P(langbuffer+len,s2,LCD_WIDTH-len);
  2172. len+=strlen_P(s2);
  2173. strncpy_P(langbuffer+len,s3,LCD_WIDTH-len);
  2174. len+=strlen_P(s3);
  2175. strncpy_P(langbuffer+len,s4,LCD_WIDTH-len);
  2176. return langbuffer;
  2177. }