lang_en_es.txt 24 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215
  1. #MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14
  2. " of 4"
  3. " de 4"
  4. #MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14
  5. " of 9"
  6. " de 9"
  7. #MSG_MEASURED_OFFSET
  8. "[0;0] point offset"
  9. "[0;0] punto offset"
  10. #MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
  11. "Crash detection can\x0abe turned on only in\x0aNormal mode"
  12. "Dec. choque puede\x0aser activada solo en\x0aModo normal"
  13. #MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
  14. "WARNING:\x0aCrash detection\x0adisabled in\x0aStealth mode"
  15. "ATENCION:\x0aDec. choque\x0adesactivada en\x0aModo silencio"
  16. #
  17. ">Cancel"
  18. ">Cancelar"
  19. #MSG_BABYSTEPPING_Z c=15
  20. "Adjusting Z:"
  21. "Ajustar Z:"
  22. #MSG_SELFTEST_CHECK_ALLCORRECT c=20
  23. "All correct "
  24. "Todo bien"
  25. #MSG_WIZARD_DONE c=20 r=8
  26. "All is done. Happy printing!"
  27. "Terminado! Feliz impresion!"
  28. #
  29. "Ambient"
  30. "Ambiente"
  31. #MSG_PRESS c=20
  32. "and press the knob"
  33. "Haz clic"
  34. #MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
  35. "Are left and right Z~carriages all up?"
  36. "Carros Z izq./der. estan arriba maximo?"
  37. #MSG_AUTO_DEPLETE c=17 r=1
  38. "SpoolJoin"
  39. "\x00"
  40. #MSG_AUTO_HOME
  41. "Auto home"
  42. "Llevar al origen"
  43. #MSG_AUTOLOAD_FILAMENT c=17
  44. "AutoLoad filament"
  45. "Carga automatica de filamento"
  46. #MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
  47. "Autoloading filament available only when filament sensor is turned on..."
  48. "La carga automatica de filamento solo funciona si el sensor de filamento esta activado..."
  49. #MSG_AUTOLOADING_ENABLED c=20 r=4
  50. "Autoloading filament is active, just press the knob and insert filament..."
  51. "La carga automatica de filamento esta activada, pulse el dial e inserte el filamento..."
  52. #MSG_SELFTEST_AXIS_LENGTH
  53. "Axis length"
  54. "Longitud del eje"
  55. #MSG_SELFTEST_AXIS
  56. "Axis"
  57. "Eje"
  58. #MSG_SELFTEST_BEDHEATER
  59. "Bed / Heater"
  60. "Base / Calentador"
  61. #MSG_BED_DONE
  62. "Bed done"
  63. "Base preparada"
  64. #MSG_BED_HEATING
  65. "Bed Heating"
  66. "Calentando Base"
  67. #MSG_BED_CORRECTION_MENU
  68. "Bed level correct"
  69. "Corr. de la cama"
  70. #MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=4
  71. "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
  72. "Nivelacion fallada. Sensor no funciona. Restos en boquilla? Esperando reset."
  73. #MSG_BED
  74. "Bed"
  75. "Base calefactable "
  76. #MSG_MENU_BELT_STATUS c=15 r=1
  77. "Belt status"
  78. "Estado de la correa"
  79. #MSG_RECOVER_PRINT c=20 r=2
  80. "Blackout occurred. Recover print?"
  81. "Se fue la luz. ?Reanudar la impresion?"
  82. #
  83. "Calibrating home"
  84. "Calibrando posicion inicial"
  85. #MSG_CALIBRATE_BED
  86. "Calibrate XYZ"
  87. "Calibrar XYZ"
  88. #MSG_HOMEYZ
  89. "Calibrate Z"
  90. "Calibrar Z"
  91. #MSG_CALIBRATE_PINDA c=17 r=1
  92. "Calibrate"
  93. "Calibrar"
  94. #MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
  95. "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
  96. "Calibrando XYZ. Gira el dial para subir el extrusor hasta tocar los topes superiores. Despues haz clic."
  97. #MSG_CALIBRATE_Z_AUTO c=20 r=2
  98. "Calibrating Z"
  99. "Calibrando Z"
  100. #MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
  101. "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
  102. "Calibrando Z. Gira el dial para subir el extrusor hasta tocar los topes superiores. Despues haz clic."
  103. #MSG_HOMEYZ_DONE
  104. "Calibration done"
  105. "Calibracion OK"
  106. #MSG_MENU_CALIBRATION
  107. "Calibration"
  108. "Calibracion"
  109. #
  110. "Cancel"
  111. "Cancelar"
  112. #MSG_SD_REMOVED
  113. "Card removed"
  114. "Tarjeta retirada"
  115. #MSG_NOT_COLOR
  116. "Color not correct"
  117. "Color no homogeneo"
  118. #MSG_COOLDOWN
  119. "Cooldown"
  120. "Enfriar"
  121. #
  122. "Copy selected language?"
  123. "Copiar idioma seleccionado?"
  124. #MSG_CRASHDETECT
  125. "Crash det."
  126. "Det. choque"
  127. #MSG_CRASH_DETECTED c=20 r=1
  128. "Crash detected."
  129. "Choque detectado."
  130. #
  131. "Crash detected. Resume print?"
  132. "Choque detectado. Continuar impresion?"
  133. #
  134. "Crash"
  135. "Choque"
  136. #MSG_CURRENT c=19 r=1
  137. "Current"
  138. "Actual"
  139. #MSG_DATE c=17 r=1
  140. "Date:"
  141. "Fecha:"
  142. #MSG_DISABLE_STEPPERS
  143. "Disable steppers"
  144. "Apagar motores"
  145. #MSG_BABYSTEP_Z_NOT_SET c=20 r=12
  146. "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
  147. "Distancia entre la punta del boquilla y la superficie de la base aun no fijada. Por favor siga el manual, capitulo Primeros Pasos, Calibracion primera capa."
  148. #MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
  149. "Do you want to repeat last step to readjust distance between nozzle and heatbed?"
  150. "Quieres repetir el ultimo paso para reajustar la distancia boquilla-base?"
  151. #MSG_EXTRUDER_CORRECTION c=10
  152. "E-correct:"
  153. "E-correcion:"
  154. #MSG_EJECT_FILAMENT c=17 r=1
  155. "Eject filament"
  156. "Expulsar filamento"
  157. #
  158. "Eject"
  159. "Expulsar"
  160. #MSG_EJECTING_FILAMENT c=20 r=1
  161. "Ejecting filament"
  162. "Expulsando filamento"
  163. #MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1
  164. "Endstop not hit"
  165. "Endstop no alcanzado"
  166. #MSG_SELFTEST_ENDSTOP
  167. "Endstop"
  168. "\x00"
  169. #MSG_SELFTEST_ENDSTOPS
  170. "Endstops"
  171. "\x00"
  172. #MSG_STACK_ERROR c=20 r=4
  173. "Error - static memory has been overwritten"
  174. "Error - se ha sobre-escrito la memoria estatica"
  175. #MSG_FSENS_NOT_RESPONDING c=20 r=4
  176. "ERROR: Filament sensor is not responding, please check connection."
  177. "ERROR: El sensor de filamento no responde, por favor comprueba la conexion."
  178. #MSG_ERROR
  179. "ERROR:"
  180. "\x00"
  181. #MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
  182. "Extruder fan:"
  183. "Ventilador del extrusor:"
  184. #MSG_INFO_EXTRUDER c=15 r=1
  185. "Extruder info"
  186. "Informacion del extrusor"
  187. #MSG_MOVE_E
  188. "Extruder"
  189. "Extruir"
  190. #
  191. "Fail stats MMU"
  192. "Estadistica de fallos MMU"
  193. #MSG_FSENSOR_AUTOLOAD
  194. "F. autoload"
  195. "Autocarg.fil."
  196. #
  197. "Fail stats"
  198. "Estadistica de fallos"
  199. #MSG_FAN_SPEED c=14
  200. "Fan speed"
  201. "Velocidad Vent."
  202. #MSG_SELFTEST_FAN c=20
  203. "Fan test"
  204. "Test ventiladores"
  205. #MSG_FANS_CHECK
  206. "Fans check"
  207. "Comprob.vent"
  208. #MSG_FSENSOR
  209. "Fil. sensor"
  210. "Sensor Fil."
  211. #
  212. "Filam. runouts"
  213. "Filam. acabado"
  214. #MSG_FILAMENT_CLEAN c=20 r=2
  215. "Filament extruding & with correct color?"
  216. "Es nitido el color nuevo?"
  217. #MSG_NOT_LOADED c=19
  218. "Filament not loaded"
  219. "Fil. no introducido"
  220. #MSG_FILAMENT_SENSOR c=20
  221. "Filament sensor"
  222. "Sensor de filamento"
  223. #MSG_FILAMENT_USED c=19 r=1
  224. "Filament used"
  225. "Filamento usado"
  226. #MSG_PRINT_TIME c=19 r=1
  227. "Print time"
  228. "Tiempo de imp.:"
  229. #MSG_FILE_INCOMPLETE c=20 r=2
  230. "File incomplete. Continue anyway?"
  231. "Archivo incompleto. ?Continuar de todos modos?"
  232. #MSG_FINISHING_MOVEMENTS c=20 r=1
  233. "Finishing movements"
  234. "Term. movimientos"
  235. #MSG_V2_CALIBRATION c=17 r=1
  236. "First layer cal."
  237. "Cal. primera cap."
  238. #MSG_WIZARD_SELFTEST c=20 r=8
  239. "First, I will run the selftest to check most common assembly problems."
  240. "Primero, hare el Selftest para comprobar los problemas de montaje mas comunes."
  241. #
  242. "Fix the issue and then press button on MMU unit."
  243. "Corrige el problema y pulsa el boton en la unidad MMU."
  244. #MSG_FLOW
  245. "Flow"
  246. "Flujo"
  247. #MSG_PRUSA3D_FORUM
  248. "forum.prusa3d.com"
  249. "\x00"
  250. #MSG_SELFTEST_COOLING_FAN c=20
  251. "Front print fan?"
  252. "Vent. frontal?"
  253. #MSG_BED_CORRECTION_FRONT c=14 r=1
  254. "Front side[um]"
  255. "Frontal [um]"
  256. #MSG_SELFTEST_FANS
  257. "Front/left fans"
  258. "Ventiladores frontal/izquierdo"
  259. #MSG_SELFTEST_HEATERTHERMISTOR
  260. "Heater/Thermistor"
  261. "Calentador/Termistor"
  262. #MSG_BED_HEATING_SAFETY_DISABLED
  263. "Heating disabled by safety timer."
  264. "Calentadores desactivados por el temporizador de seguridad."
  265. #MSG_HEATING_COMPLETE c=20
  266. "Heating done."
  267. "Calentamiento acabado."
  268. #MSG_HEATING
  269. "Heating"
  270. "Calentando..."
  271. #MSG_WIZARD_WELCOME c=20 r=7
  272. "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
  273. "Hola, soy tu impresora Original Prusa i3. Quieres que te guie a traves de la configuracion?"
  274. #MSG_PRUSA3D_HOWTO
  275. "howto.prusa3d.com"
  276. "\x00"
  277. #MSG_FILAMENTCHANGE
  278. "Change filament"
  279. "Cambiar filamento"
  280. #MSG_CHANGE_SUCCESS
  281. "Change success!"
  282. "Cambio correcto"
  283. #MSG_CORRECTLY c=20
  284. "Changed correctly?"
  285. "Cambio correcto?"
  286. #MSG_SELFTEST_CHECK_BED c=20
  287. "Checking bed "
  288. "Control base cal."
  289. #MSG_SELFTEST_CHECK_ENDSTOPS c=20
  290. "Checking endstops"
  291. "Control endstops"
  292. #MSG_SELFTEST_CHECK_HOTEND c=20
  293. "Checking hotend "
  294. "Control fusor"
  295. #MSG_SELFTEST_CHECK_FSENSOR c=20
  296. "Checking sensors "
  297. "Comprobando los sensores"
  298. #MSG_SELFTEST_CHECK_X c=20
  299. "Checking X axis "
  300. "Control sensor X"
  301. #MSG_SELFTEST_CHECK_Y c=20
  302. "Checking Y axis "
  303. "Control sensor Y"
  304. #MSG_SELFTEST_CHECK_Z c=20
  305. "Checking Z axis "
  306. "Control sensor Z"
  307. #MSG_CHOOSE_EXTRUDER c=20 r=1
  308. "Choose extruder:"
  309. "Elegir extrusor:"
  310. #MSG_CHOOSE_FILAMENT c=20 r=1
  311. "Choose filament:"
  312. "Elije filamento:"
  313. #MSG_FILAMENT c=17 r=1
  314. "Filament"
  315. "Filamento"
  316. #MSG_WIZARD_XYZ_CAL c=20 r=8
  317. "I will run xyz calibration now. It will take approx. 12 mins."
  318. "Hare la calibracion XYZ. Tardara 12 min. aproximadamente."
  319. #MSG_WIZARD_Z_CAL c=20 r=8
  320. "I will run z calibration now."
  321. "Voy a hacer Calibracion Z ahora."
  322. #MSG_WIZARD_V2_CAL_2 c=20 r=12
  323. "I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
  324. "Voy a comenzar a imprimir la linea y tu bajaras el nozzle gradualmente al rotar el dial, hasta que llegues a la altura optima. Mira las imagenes del capitulo Calibracion en el manual."
  325. #MSG_WATCH
  326. "Info screen"
  327. "Monitorizar"
  328. #
  329. "Is filament 1 loaded?"
  330. "?Esta cargado el filamento 1?"
  331. #MSG_INSERT_FILAMENT c=20
  332. "Insert filament"
  333. "Introducir filamento"
  334. #MSG_WIZARD_FILAMENT_LOADED c=20 r=2
  335. "Is filament loaded?"
  336. "Esta el filamento cargado?"
  337. #MSG_WIZARD_PLA_FILAMENT c=20 r=2
  338. "Is it PLA filament?"
  339. "Es el filamento PLA?"
  340. #MSG_PLA_FILAMENT_LOADED c=20 r=2
  341. "Is PLA filament loaded?"
  342. "Esta el filamento PLA cargado?"
  343. #MSG_STEEL_SHEET_CHECK c=20 r=2
  344. "Is steel sheet on heatbed?"
  345. "?Esta colocada la lamina de acero sobre la base?"
  346. #
  347. "Last print failures"
  348. "Ultimas impresiones fallidas"
  349. #
  350. "Last print"
  351. "Ultima impresion"
  352. #MSG_SELFTEST_EXTRUDER_FAN c=20
  353. "Left hotend fan?"
  354. "Vent. izquierdo?"
  355. #
  356. "Left"
  357. "Izquierda"
  358. #MSG_BED_CORRECTION_LEFT c=14 r=1
  359. "Left side [um]"
  360. "Izquierda [um]"
  361. #
  362. "Lin. correction"
  363. "Correccion de Linealidad"
  364. #MSG_BABYSTEP_Z
  365. "Live adjust Z"
  366. "Micropaso Eje Z"
  367. #MSG_LOAD_FILAMENT c=17
  368. "Load filament"
  369. "Introducir filam."
  370. #MSG_LOADING_COLOR
  371. "Loading color"
  372. "Cambiando color"
  373. #MSG_LOADING_FILAMENT c=20
  374. "Loading filament"
  375. "Introduciendo filam."
  376. #MSG_LOOSE_PULLEY c=20 r=1
  377. "Loose pulley"
  378. "Polea suelta"
  379. #
  380. "Load to nozzle"
  381. "Cargar a la boquilla"
  382. #MSG_M117_V2_CALIBRATION c=25 r=1
  383. "M117 First layer cal."
  384. "M117 Cal. primera cap."
  385. #MSG_MAIN
  386. "Main"
  387. "Menu principal"
  388. #MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60
  389. "Measuring reference height of calibration point"
  390. "Midiendo altura del punto de calibracion"
  391. #MSG_MESH_BED_LEVELING
  392. "Mesh Bed Leveling"
  393. "Nivelacion Mesh Level"
  394. #MSG_MMU_OK_RESUMING_POSITION c=20 r=4
  395. "MMU OK. Resuming position..."
  396. "MMU OK. Restaurando posicion..."
  397. #MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
  398. "MMU OK. Resuming temperature..."
  399. "MMU OK. Restaurando temperatura..."
  400. #
  401. "Measured skew"
  402. "Desviacion medida:"
  403. #
  404. "MMU fails"
  405. "Fallos MMU"
  406. #
  407. "MMU load failed "
  408. "Carga MMU fallida"
  409. #
  410. "MMU load fails"
  411. "Carga MMU falla"
  412. #MSG_MMU_OK_RESUMING c=20 r=4
  413. "MMU OK. Resuming..."
  414. "MMU OK. Resumiendo..."
  415. #MSG_MODE
  416. "Mode"
  417. "Modo"
  418. #MSG_NORMAL
  419. "Normal"
  420. "\x00"
  421. #MSG_SILENT
  422. "Silent"
  423. "Silencio"
  424. #
  425. "MMU needs user attention."
  426. "MMU necesita atencion del usuario."
  427. #
  428. "MMU power fails"
  429. "Fallo de energia en MMU"
  430. #MSG_STEALTH
  431. "Stealth"
  432. "Silencio"
  433. #MSG_AUTO_POWER
  434. "Auto power"
  435. "Fuerza auto"
  436. #MSG_HIGH_POWER
  437. "High power"
  438. "Rend.pleno"
  439. #
  440. "MMU2 connected"
  441. "MMU2 conectado"
  442. #MSG_SELFTEST_MOTOR
  443. "Motor"
  444. "\x00"
  445. #MSG_MOVE_AXIS
  446. "Move axis"
  447. "Mover ejes"
  448. #MSG_MOVE_X
  449. "Move X"
  450. "Mover X"
  451. #MSG_MOVE_Y
  452. "Move Y"
  453. "Mover Y"
  454. #MSG_MOVE_Z
  455. "Move Z"
  456. "Mover Z"
  457. #MSG_NO_MOVE
  458. "No move."
  459. "Sin movimiento"
  460. #MSG_NO_CARD
  461. "No SD card"
  462. "No hay tarjeta SD"
  463. #MSG_NA
  464. "N/A"
  465. "N/D"
  466. #MSG_NO
  467. "No"
  468. "\x00"
  469. #MSG_SELFTEST_NOTCONNECTED
  470. "Not connected"
  471. "No hay conexion "
  472. #
  473. "New firmware version available:"
  474. "Nuevo firmware disponible:"
  475. #MSG_SELFTEST_FAN_NO c=19
  476. "Not spinning"
  477. "Ventilador no gira"
  478. #MSG_WIZARD_V2_CAL c=20 r=8
  479. "Now I will calibrate distance between tip of the nozzle and heatbed surface."
  480. "Voy a calibrar la distancia entre la punta de la boquilla y la superficie de la base."
  481. #MSG_WIZARD_WILL_PREHEAT c=20 r=4
  482. "Now I will preheat nozzle for PLA."
  483. "Voy a precalentar la boquilla para PLA ahora."
  484. #MSG_NOZZLE
  485. "Nozzle"
  486. "Boquilla"
  487. #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
  488. "Old settings found. Default PID, Esteps etc. will be set."
  489. "Se han encontrado ajustes anteriores. Se ajustara el PID, los pasos del extrusor, etc"
  490. #
  491. "Now remove the test print from steel sheet."
  492. "Ahora retira la prueba de la lamina de acero."
  493. #
  494. "Nozzle FAN"
  495. "Ventilador de capa"
  496. #MSG_PAUSE_PRINT
  497. "Pause print"
  498. "Pausar impresion"
  499. #MSG_PID_RUNNING c=20 r=1
  500. "PID cal. "
  501. "Cal. PID "
  502. #MSG_PID_FINISHED c=20 r=1
  503. "PID cal. finished"
  504. "Cal. PID terminada"
  505. #MSG_PID_EXTRUDER c=17 r=1
  506. "PID calibration"
  507. "Calibracion PID"
  508. #MSG_PINDA_PREHEAT c=20 r=1
  509. "PINDA Heating"
  510. "Calentando PINDA"
  511. #MSG_PAPER c=20 r=8
  512. "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
  513. "Colocar una hoja de papel sobre la superficie de impresion durante la calibracion de los primeros 4 puntos. Si la boquilla mueve el papel, apagar impresora inmediatamente."
  514. #MSG_WIZARD_CLEAN_HEATBED c=20 r=8
  515. "Please clean heatbed and then press the knob."
  516. "Limpia la superficie de la base, por favor, y haz clic"
  517. #MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
  518. "Please clean the nozzle for calibration. Click when done."
  519. "Limpia boquilla para calibracion. Click cuando acabes."
  520. #MSG_SELFTEST_PLEASECHECK
  521. "Please check :"
  522. "Controla :"
  523. #MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
  524. "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."
  525. "Lee el manual y resuelve el problema. Despues, reinicia la impresora y continua con el Wizard"
  526. #MSG_WIZARD_LOAD_FILAMENT c=20 r=8
  527. "Please insert PLA filament to the extruder, then press knob to load it."
  528. "Inserta, por favor, filamento PLA en el extrusor. Despues haz clic para cargarlo."
  529. #MSG_PLEASE_LOAD_PLA c=20 r=4
  530. "Please load PLA filament first."
  531. "Carga el filamento PLA primero por favor."
  532. #MSG_CHECK_IDLER c=20 r=4
  533. "Please open idler and remove filament manually."
  534. "Por favor abate el rodillo de empuje (idler) y retira el filamento manualmente."
  535. #MSG_PLACE_STEEL_SHEET c=20 r=4
  536. "Please place steel sheet on heatbed."
  537. "Por favor coloca la chapa de acero en la base calefactable."
  538. #MSG_PRESS_TO_UNLOAD c=20 r=4
  539. "Please press the knob to unload filament"
  540. "Por favor, pulsa el dial para descargar el filamento"
  541. #
  542. "Please insert PLA filament to the first tube of MMU, then press the knob to load it."
  543. "Por favor introduce el filamento al primer tubo MMU, despues presiona el dial para imprimirlo."
  544. #MSG_PULL_OUT_FILAMENT c=20 r=4
  545. "Please pull out filament immediately"
  546. "Por favor retire el filamento de inmediato"
  547. #MSG_EJECT_REMOVE c=20 r=4
  548. "Please remove filament and then press the knob."
  549. "Por favor quite el filamento y luego presione el dial."
  550. #MSG_REMOVE_STEEL_SHEET c=20 r=4
  551. "Please remove steel sheet from heatbed."
  552. "Por favor retire la chapa de acero de la base calefactable."
  553. #MSG_RUN_XYZ c=20 r=4
  554. "Please run XYZ calibration first."
  555. "Por favor realiza la calibracion XYZ primero."
  556. #MSG_UPDATE_MMU2_FW c=20 r=4
  557. "Please update firmware in your MMU2. Waiting for reset."
  558. "Por favor actualice el firmware en tu MMU2. Esperando el reseteo."
  559. #MSG_PLEASE_WAIT c=20
  560. "Please wait"
  561. "Por Favor Espere"
  562. #
  563. "Please remove shipping helpers first."
  564. "Por favor retira los soportes de envio primero."
  565. #MSG_PREHEAT_NOZZLE c=20
  566. "Preheat the nozzle!"
  567. "Precalienta extrusor!"
  568. #MSG_PREHEAT
  569. "Preheat"
  570. "Precalentar"
  571. #MSG_WIZARD_HEATING c=20 r=3
  572. "Preheating nozzle. Please wait."
  573. "Precalentando nozzle. Espera por favor."
  574. #
  575. "Please upgrade."
  576. "Actualize por favor"
  577. #MSG_PRESS_TO_PREHEAT c=20 r=4
  578. "Press knob to preheat nozzle and continue."
  579. "Pulsa el dial para precalentar la boquilla y continue."
  580. #
  581. "Power failures"
  582. "Cortes de energia"
  583. #MSG_PRINT_ABORTED c=20
  584. "Print aborted"
  585. "Impresion cancelada"
  586. #
  587. "Preheating to load"
  588. "Precalentar para cargar"
  589. #
  590. "Preheating to unload"
  591. "Precalentar para descargar"
  592. #MSG_SELFTEST_PRINT_FAN_SPEED c=18
  593. "Print fan:"
  594. "Ventilador del fusor:"
  595. #MSG_CARD_MENU
  596. "Print from SD"
  597. "Menu tarjeta SD"
  598. #
  599. "Press the knob"
  600. "Pulsa el dial"
  601. #MSG_PRINT_PAUSED c=20 r=1
  602. "Print paused"
  603. "Impresion en pausa"
  604. #
  605. "Press the knob to resume nozzle temperature."
  606. "Presiona el dial para continuar con la temperatura de la boquilla."
  607. #MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
  608. "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
  609. "Impresora no esta calibrada todavia. Por favor usa el manual capitulo Primeros pasos Calibracion flujo."
  610. #
  611. "Print FAN"
  612. "Ventilador del extrusor"
  613. #MSG_PRUSA3D
  614. "prusa3d.com"
  615. "prusa3d.es"
  616. #MSG_BED_CORRECTION_REAR c=14 r=1
  617. "Rear side [um]"
  618. "Trasera [um]"
  619. #MSG_RECOVERING_PRINT c=20 r=1
  620. "Recovering print "
  621. "Recuperando impresion"
  622. #MSG_REMOVE_OLD_FILAMENT c=20 r=4
  623. "Remove old filament and press the knob to start loading new filament."
  624. "Retire el filamento viejo y presione el dial para comenzar a cargar el nuevo filamento."
  625. #
  626. "Prusa i3 MK3S OK."
  627. "\x00"
  628. #MSG_CALIBRATE_BED_RESET
  629. "Reset XYZ calibr."
  630. "\x00"
  631. #MSG_BED_CORRECTION_RESET
  632. "Reset"
  633. "\x00"
  634. #MSG_RESUME_PRINT
  635. "Resume print"
  636. "Reanudar impres."
  637. #MSG_RESUMING_PRINT c=20 r=1
  638. "Resuming print"
  639. "Resumiendo impresion"
  640. #MSG_BED_CORRECTION_RIGHT c=14 r=1
  641. "Right side[um]"
  642. "Derecha [um]"
  643. #MSG_RPI_PORT
  644. "RPi port"
  645. "Puerto RPi"
  646. #MSG_WIZARD_RERUN c=20 r=7
  647. "Running Wizard will delete current calibration results and start from the beginning. Continue?"
  648. "Ejecutar el Wizard borrara los valores de calibracion actuales y comenzara de nuevo. Continuar?"
  649. #MSG_SD_CARD
  650. "SD card"
  651. "Tarj. SD"
  652. #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY
  653. "FlashAir"
  654. "\x00"
  655. #
  656. "Right"
  657. "Derecha"
  658. #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60
  659. "Searching bed calibration point"
  660. "Buscando punto de calibracion base"
  661. #MSG_LANGUAGE_SELECT
  662. "Select language"
  663. "Cambiar el idioma"
  664. #MSG_SELFTEST_OK
  665. "Self test OK"
  666. "\x00"
  667. #MSG_SELFTEST_START c=20
  668. "Self test start "
  669. "Iniciar Selftest"
  670. #MSG_SELFTEST
  671. "Selftest "
  672. "Selftest"
  673. #MSG_SELFTEST_ERROR
  674. "Selftest error !"
  675. "Error Selftest !"
  676. #MSG_SELFTEST_FAILED c=20
  677. "Selftest failed "
  678. "Fallo Selftest"
  679. #MSG_FORCE_SELFTEST c=20 r=8
  680. "Selftest will be run to calibrate accurate sensorless rehoming."
  681. "Se realizara el auto-test para calibrar con precision la vuelta a la posicion inicial sin sensores."
  682. #
  683. "Select nozzle preheat temperature which matches your material."
  684. "Selecciona la temperatura para precalentar la boquilla que se ajuste a tu material. "
  685. #
  686. "Select PLA filament:"
  687. "Seleccionar filamento PLA:"
  688. #MSG_SET_TEMPERATURE c=19 r=1
  689. "Set temperature:"
  690. "Establecer temp.:"
  691. #MSG_SETTINGS
  692. "Settings"
  693. "Configuracion"
  694. #MSG_SHOW_END_STOPS c=17 r=1
  695. "Show end stops"
  696. "Mostrar endstops"
  697. #
  698. "Sensor state"
  699. "Estado del sensor"
  700. #MSG_FILE_CNT c=20 r=4
  701. "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
  702. "Algunos archivos no se ordenaran. Maximo 100 archivos por carpeta para ordenar. "
  703. #MSG_SORT
  704. "Sort"
  705. "Ordenar"
  706. #MSG_NONE
  707. "None"
  708. "Nada"
  709. #MSG_SORT_TIME
  710. "Time"
  711. "Fecha"
  712. #
  713. "Severe skew"
  714. "Inclinacion severa"
  715. #MSG_SORT_ALPHA
  716. "Alphabet"
  717. "Alfabet"
  718. #MSG_SORTING c=20 r=1
  719. "Sorting files"
  720. "Ordenando archivos"
  721. #MSG_SOUND_LOUD c=17 r=1
  722. "Sound [loud]"
  723. "Sonido [alto]"
  724. #
  725. "Slight skew"
  726. "Ligeramente inclinado"
  727. #MSG_SOUND_MUTE c=17 r=1
  728. "Sound [mute]"
  729. "Sonido[silenciad]"
  730. #
  731. "Some problem encountered, Z-leveling enforced ..."
  732. "Problema encontrado, nivelacion Z forzosa ..."
  733. #MSG_SOUND_ONCE c=17 r=1
  734. "Sound [once]"
  735. "Sonido [una vez]"
  736. #MSG_SOUND_SILENT c=17 r=1
  737. "Sound [silent]"
  738. "Sonido[silencios]"
  739. #MSG_SPEED
  740. "Speed"
  741. "Velocidad"
  742. #MSG_SELFTEST_FAN_YES c=19
  743. "Spinning"
  744. "Ventilador girando"
  745. #MSG_TEMP_CAL_WARNING c=20 r=4
  746. "Stable ambient temperature 21-26C is needed a rigid stand is required."
  747. "Se necesita una temperatura ambiente ente 21 y 26C y un soporte rigido."
  748. #MSG_STATISTICS
  749. "Statistics "
  750. "Estadisticas "
  751. #MSG_STOP_PRINT
  752. "Stop print"
  753. "Detener impresion"
  754. #MSG_STOPPED
  755. "STOPPED. "
  756. "PARADA"
  757. #MSG_SUPPORT
  758. "Support"
  759. "Soporte"
  760. #MSG_SELFTEST_SWAPPED
  761. "Swapped"
  762. "Intercambiado"
  763. #MSG_TEMP_CALIBRATION c=20 r=1
  764. "Temp. cal. "
  765. "Cal. temp. "
  766. #MSG_TEMP_CALIBRATION_ON c=20 r=1
  767. "Temp. cal. [on]"
  768. "Cal. temp. [ON]"
  769. #MSG_TEMP_CALIBRATION_OFF c=20 r=1
  770. "Temp. cal. [off]"
  771. "Cal. temp. [OFF]"
  772. #MSG_CALIBRATION_PINDA_MENU c=17 r=1
  773. "Temp. calibration"
  774. "Calibracion temp."
  775. #MSG_TEMP_CAL_FAILED c=20 r=8
  776. "Temperature calibration failed"
  777. "Fallo de la calibracion de temperatura"
  778. #MSG_TEMP_CALIBRATION_DONE c=20 r=12
  779. "Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
  780. "Calibracion temperatura terminada. Haz clic para continuar."
  781. #MSG_TEMPERATURE
  782. "Temperature"
  783. "Temperatura"
  784. #MSG_MENU_TEMPERATURES c=15 r=1
  785. "Temperatures"
  786. "Temperaturas"
  787. #MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=4
  788. "There is still a need to make Z calibration. Please follow the manual, chapter First steps, section Calibration flow."
  789. "Todavia es necesario hacer una calibracion Z. Por favor siga el manual, capitulo Primeros pasos, seccion Calibracion del flujo."
  790. #
  791. "Total filament"
  792. "Filamento total:"
  793. #
  794. "Total print time"
  795. "Tiempo total :"
  796. #MSG_TUNE
  797. "Tune"
  798. "Ajustar"
  799. #
  800. "Unload"
  801. "Descargar"
  802. #
  803. "Total failures"
  804. "Fallos totales"
  805. #
  806. "to load filament"
  807. "para cargar el filamento"
  808. #
  809. "to unload filament"
  810. "para descargar el filamento"
  811. #MSG_UNLOAD_FILAMENT c=17
  812. "Unload filament"
  813. "Soltar filamento"
  814. #MSG_UNLOADING_FILAMENT c=20 r=1
  815. "Unloading filament"
  816. "Soltando filamento"
  817. #
  818. "Total"
  819. "\x00"
  820. #MSG_USED c=19 r=1
  821. "Used during print"
  822. "Usado en impresion"
  823. #MSG_MENU_VOLTAGES c=15 r=1
  824. "Voltages"
  825. "Voltajes"
  826. #
  827. "unknown"
  828. "desconocido"
  829. #MSG_USERWAIT
  830. "Wait for user..."
  831. "Esperando ordenes"
  832. #MSG_WAITING_TEMP c=20 r=3
  833. "Waiting for nozzle and bed cooling"
  834. "Esperando enfriamiento de la base y extrusor."
  835. #MSG_WAITING_TEMP_PINDA c=20 r=3
  836. "Waiting for PINDA probe cooling"
  837. "Esperando a que se enfrie la sonda PINDA"
  838. #
  839. "Use unload to remove filament 1 if it protrudes outside of the rear MMU tube. Use eject if it is hidden in tube."
  840. "Usa unload para retirar el filamento 1 si sobresale por fuera de la parte trasera del tubo MMU. Usa Expulsar si esta escondido dentro del tubo"
  841. #MSG_CHANGED_BOTH c=20 r=4
  842. "Warning: both printer type and motherboard type changed."
  843. "Aviso: tanto el tipo de impresora como el tipo de la placa han cambiado."
  844. #MSG_CHANGED_MOTHERBOARD c=20 r=4
  845. "Warning: motherboard type changed."
  846. "Cuidado: el tipo de placa ha cambiado."
  847. #MSG_CHANGED_PRINTER c=20 r=4
  848. "Warning: printer type changed."
  849. "Cuidado: Ha cambiado el tipo de impresora."
  850. #MSG_UNLOAD_SUCCESSFUL c=20 r=2
  851. "Was filament unload successful?"
  852. "?Se cargocon exito el filamento?"
  853. #MSG_SELFTEST_WIRINGERROR
  854. "Wiring error"
  855. "Error de conexion"
  856. #MSG_WIZARD c=17 r=1
  857. "Wizard"
  858. "\x00"
  859. #MSG_XYZ_DETAILS c=19 r=1
  860. "XYZ cal. details"
  861. "Detalles de calibracion XYZ"
  862. #MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
  863. "XYZ calibration failed. Please consult the manual."
  864. "Calibracion XYZ fallada. Consulta el manual por favor."
  865. #MSG_YES
  866. "Yes"
  867. "Si"
  868. #MSG_WIZARD_QUIT c=20 r=8
  869. "You can always resume the Wizard from Calibration -> Wizard."
  870. "Siempre puedes acceder al asistente desde Calibracion -> Wizard"
  871. #MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
  872. "XYZ calibration all right. Skew will be corrected automatically."
  873. "Calibracion XYZ correcta. La inclinacion se corregira automaticamente."
  874. #MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
  875. "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
  876. "Calibracion XYZ correcta. Los ejes X / Y estan ligeramente inclinados. Buen trabajo!"
  877. #
  878. "X-correct:"
  879. "X-correcion:"
  880. #MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
  881. "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
  882. "Calibracion XYZ ok. Ejes X/Y perpendiculares. Enhorabuena!"
  883. #MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
  884. "XYZ calibration compromised. Front calibration points not reachable."
  885. "Calibrazion XYZ comprometida. Puntos frontales no alcanzables."
  886. #MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
  887. "XYZ calibration compromised. Right front calibration point not reachable."
  888. "Calibrazion XYZ comprometida. Punto frontal derecho no alcanzable."
  889. #MSG_LOAD_ALL c=17
  890. "Load all"
  891. "Intr. todos fil."
  892. #
  893. "XYZ calibration failed. Bed calibration point was not found."
  894. "Calibracion XYZ fallada. Puntos de calibracion en la base no encontrados."
  895. #
  896. "XYZ calibration failed. Front calibration points not reachable."
  897. "Calibracion XYZ fallada. Puntos frontales no alcanzables."
  898. #
  899. "XYZ calibration failed. Right front calibration point not reachable."
  900. "Calibracion XYZ fallad. Punto frontal derecho no alcanzable."
  901. #
  902. "Y distance from min"
  903. "Distancia en Y desde el min"
  904. #
  905. "Y-correct:"
  906. "Y-correcion:"
  907. #MSG_OFF
  908. "Off"
  909. "Ina"
  910. #MSG_ON
  911. "On"
  912. "Act"