1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237 |
- #!/bin/bash
- # This bash script is used to compile automatically the Prusa firmware with a dedicated build environment and settings
- #
- # Supported OS: Windows 10, Linux64 bit
- # Beta OS: Linux32 bit
- #
- # Linux:
- #
- # Windows:
- # To execute this script you gonna need few things on your Windows machine
- #
- # Linux Subsystem Ubuntu
- # 1. Follow these instructions
- # 2. Open Ubuntu bash and get latest updates with 'apt-get update'
- # 3. Install zip with 'apt-get install zip'
- # 4. Install python3 with 'apt-get install python3'
- # 5. Add command 'ln -sf /usr/bin/python3.5 /usr/bin/python' to link python3 to python.
- # Do not install 'python' as python 2.x has end of life see https://pythonclock.org/
- # 6. Add at top of ~/.bashrc following lines by using 'sudo nano ~/.bashrc'
- #
- # export OS="Linux"
- # export JAVA_TOOL_OPTIONS="-Djava.net.preferIPv4Stack=true"
- # export GPG_TTY=$(tty)
- #
- # and confirm them. Restart Ubuntu bash
- #
- # Or GIT-BASH
- # 1. Download and install the correct (64bit or 32bit) Git version https://git-scm.com/download/win
- # 2. Also follow these instructions https://gist.github.com/evanwill/0207876c3243bbb6863e65ec5dc3f058
- # 3. Download and install 7z-zip from its official website.
- # By default, it is installed under the directory /c/Program Files/7-Zip in Windows 10 as my case.
- # 4. Run git Bash under Administrator privilege and navigate to the directory /c/Program Files/Git/mingw64/bin,
- # you can run the command ln -s /c/Program Files/7-Zip/7z.exe zip.exe
- #
- # Useful things to edit and compare your custom Firmware
- # 1. Download and install current and correct (64bit or 32bit) Notepad++ version https://notepad-plus-plus.org/download
- # 2. Another great tool to compare your custom mod and stock firmware is WinMerge http://winmerge.org/downloads/?lang=en
- #
- # Example for MK3: open git bash and change to your Firmware directory
- # <username>@<machine name> MINGW64 /<drive>/path
- # bash build.sh 1_75mm_MK3-EINSy10a-E3Dv6full
- #
- # Example for MK25: open git bash and change to your directory
- # gussner@WIN01 MINGW64 /d/Data/Prusa-Firmware/MK3
- # bash build.sh 1_75mm_MK25-RAMBo13a-E3Dv6full
- #
- # The compiled hex files can be found in the folder above like from the example
- # gussner@WIN01 MINGW64 /d/Data/Prusa-Firmware
- # FW351-Build1778-1_75mm_MK25-RAMBo13a-E3Dv6full.hex
- #
- # Why make Arduino IDE portable?
- # To have a distinguished Prusa Firmware build environment I decided to use Arduino IDE in portable mode.
- # - Changes made to other Arduino instances do not change anything in this build environment.
- # By default Arduino IDE uses "users" and shared library folders which is useful as soon you update the Software.
- # But in this case we need a stable and defined build environment, so keep it separated it kind of important.
- # Some may argue that this is only used by a script, BUT as soon someone accidentally or on purpose starts Arduino IDE
- # it will use the default Arduino IDE folders and so can corrupt the build environment.
- #
- # Version: 2.0.0-Build_56
- # Change log:
- # 12 Jan 2019, 3d-gussner, Fixed "compiler.c.elf.flags=-w -Os -Wl,-u,vfprintf -lprintf_flt -lm -Wl,--gc-sections" in 'platform.txt'
- # 16 Jan 2019, 3d-gussner, Build_2, Added development check to modify 'Configuration.h' to prevent unwanted LCD messages that Firmware is unknown
- # 17 Jan 2019, 3d-gussner, Build_3, Check for OS Windows or Linux and use the right build environment
- # 10 Feb 2019, ropaha, Pull Request, Select variant from list while using build.sh
- # 10 Feb 2019, ropaha, change FW_DEV_VERSION automatically depending on FW_VERSION RC/BETA/ALPHA
- # 10 Feb 2019, 3d-gussner, 1st tests with English only
- # 10 Feb 2019, ropaha, added compiling of all variants and English only
- # 10 Feb 2019, 3d-gussner, Set OUTPUT_FOLDER for hex files
- # 11 Feb 2019, 3d-gussner/ropaha, Minor changes and fixes
- # 11 Feb 2019, 3d-gussner, Ready for RC
- # 12 Feb 2019, 3d-gussner, Check if wget and zip are installed. Thanks to Bernd to point it out
- # 12 Feb 2019, 3d-gussner, Changed OS check to OSTYPE as it is not supported on Ubuntu
- # Also added different BUILD_ENV folders depending on OS used so Windows
- # Users can use git-bash AND Windows Linux Subsystems at the same time
- # Cleanup compiler flags is only depends on OS version.
- # 12 Feb 2019, 3d-gussner, Added additional OSTYPE check
- # 15 feb 2019, 3d-gussner, Added zip files for miniRAMbo multi language hex files
- # 15 Feb 2019, 3d-gussner, Added more checks if
- # Compiled Hex-files
- # Configuration_prusa.h
- # language build files
- # multi language firmware files exist and clean them up
- # 15 Feb 2019, 3d-gussner, Fixed selection GOLD/UNKNOWN DEV_STATUS for ALL variants builds, so you have to choose only once
- # 15 Feb 2019, 3d-gussner, Added some colored output
- # 15 Feb 2019, 3d-gussner, troubleshooting and minor fixes
- # 16 Feb 2019, 3d-gussner, Script can be run using arguments
- # $1 = variant, example "1_75mm_MK3-EINSy10a-E3Dv6full.h" at this moment it is not possible to use ALL
- # $2 = multi language OR English only [ALL/EN_ONLY]
- # $3 = development status [GOLD/RC/BETA/ALPHA/DEVEL/DEBUG]
- # If one argument is wrong a list of valid one will be shown
- # 13 Mar 2019, 3d-gussner, MKbel updated the Linux build environment to version 1.0.2 with an Fix maximum firmware flash size.
- # So did I
- # 11 Jul 2019, deliopoulos,Updated to v1.0.6 as Prusa needs a new board definition for Firmware 3.8.x86_64
- # - Split the Download of Windows Arduino IDE 1.8.5 and Prusa specific part
- # --> less download volume needed and saves some time
- #
- # 13 Jul 2019, deliopoulos,Splitting of Arduino IDE and Prusa parts also for Linux64
- # 13 Jul 2019, 3d-gussner, Added Linux 32-bit version (untested yet)
- # MacOS could be added in future if needs
- # 14 Jul 2019, 3d-gussner, Update preferences and make it really portable
- # 15 Jul 2019, 3d-gussner, New PF-build-env GitHub branch
- # 16 Jul 2019, 3d-gussner, New Arduino_boards GitHub fork
- # 17 Jul 2019, 3d-gussner, Final tests under Windows 10 and Linux Subsystem for Windows
- # 18 Jul 2019, 3d-gussner, Added python check
- # 18 Jul 2019, deliopoulos, No need more for changing 'platform.txt' file as it comes with the Arduino Boards.
- # 18 Jul 2019, deliopoulos, Modified 'PF_BUILD_FILE_URL' to use 'BUILD_ENV' variable
- # 22 Jul 2019, 3d-gussner, Modified checks to check folder and/or installation output exists.
- # 22 Jul 2019, 3d-gussner, Added check if Arduino IDE 1.8.5 boards have been updated
- # 22 Jul 2019, 3d-gussner, Changed exit numbers 1-13 for prepare build env 21-28 for prepare compiling 31-36 compiling
- # 22 Jul 2019, 3d-gussner, Changed BOARD_URL to DRracers repository after he pulled my PR https://github.com/DRracer/Arduino_Boards/pull/1
- # 23 Jul 2019, 3d-gussner, Changed Build-env path to "PF-build-dl" as requested in PR https://github.com/prusa3d/Prusa-Firmware/pull/2028
- # Changed Hex-files folder to PF-build-hex as requested in PR
- # 23 Jul 2019, 3d-gussner, Added Finding OS version routine so supporting new OS should get easier
- # 26 Jul 2019, 3d-gussner, Change JSON repository to prusa3d after PR https://github.com/prusa3d/Arduino_Boards/pull/1 was merged
- # 23 Sep 2019, 3d-gussner, Prepare PF-build.sh for coming Prusa3d/Arduino_Boards version 1.0.2 Pull Request
- # 17 Oct 2019, 3d-gussner, Changed folder and check file names to have separated build environments depending on Arduino IDE version and
- # board-versions.
- # 15 Dec 2019, 3d-gussner, Prepare for switch to Prusa3d/PF-build-env repository
- # 15 Dec 2019, 3d-gussner, Fix Arduino user preferences for the chosen board.
- # 17 Dec 2019, 3d-gussner, Fix "timer0_fract = 0" warning by using Arduino_boards v1.0.3
- # 28 Apr 2020, 3d-gussner, Added RC3 detection
- # 03 May 2020, deliopoulos, Accept all RCx as RC versions
- # 05 May 2020, 3d-gussner, Make a copy of `not_tran.txt`and `not_used.txt` as `not_tran_$VARIANT.txt`and `not_used_$VARIANT.txt`
- # After compiling All multi-language variants it makes it easier to find missing or unused translations.
- # 12 May 2020, DRracer , Cleanup double MK2/s MK25/s `not_tran` and `not_used` files
- # 13 May 2020, leptun , If cleanup files do not exist don't try to.
- # 01 Oct 2020, 3d-gussner, Bug fix if using argument EN_ONLY. Thank to @leptun for pointing out.
- # Change Build number to script commits 'git rev-list --count HEAD PF-build.sh'
- # 02 Oct 2020, 3d-gussner, Add UNKNOWN as argument option
- # 05 Oct 2020, 3d-gussner, Disable pause and warnings using command line with all needed arguments
- # Install needed apps under linux if needed.
- # Clean PF-Firmware build when changing git branch
- # 02 Nov 2020, 3d-gussner, Check for "gawk" on Linux
- # Add argument to change build number automatically to current commit or define own number
- # Update exit numbers 1-13 for prepare build env 21-29 for prepare compiling 30-36 compiling
- # 08 Jan 2021, 3d-gussner, Comment out 'sudo' auto installation
- # Add '-?' '-h' help option
- # 27 Jan 2021, 3d-gussner, Add `-c`, `-p` and `-n` options
- # 12 Feb 2021, 3d-gussner, Add MK404-build.sh
- # 13 Feb 2021, 3d-gussner, Indentations
- # 13 Feb 2021, 3d-gussner, MK404 improvements like "flash" MK3, MK3S languages files to MK404 xflash.
- # 27 Feb 2021, 3d-gussner, Add './lang-community.sh' and update exits
- # 03 May 2021, 3d-gussner, Update exit numbers
- # 01-14 prepare build env
- # 21-32 prepare compiling
- # 41-47 compiling
- # 51-54 cleanup
- # 61-62 MK404
- # 03 May 2021, 3d-gussner, Update documentation and change version to v1.2.0
- # 03 May 2021, 3d-gussner, Add SIM atmega404
- # 17 Jun 2021, 3d-gussner, Update PF-build.sh to work after DRracer Remove FW version parsing PR
- # 17 Jun 2021, 3d-gussner, Save ELF files for FW3.10.1 debugging PRs
- # 17 Jun 2021, 3d-gussner, Add verbose_IDE to output more information during build
- # 17 Jun 2021, 3d-gussner, Change version to v2.0.0
- # 18 Jun 2021, 3d-gussner, Use atmega404 if extanded RAM or FLASH size are chosen
- # 18 Jun 2021, 3d-gussner, Remove MK404 copy of lang file as it has been fixed in MK404
- #### Start check if OSTYPE is supported
- OS_FOUND=$( command -v uname)
- case $( "${OS_FOUND}" | tr '[:upper:]' '[:lower:]') in
- linux*)
- TARGET_OS="linux"
- ;;
- msys*|cygwin*|mingw*)
- # or possible 'bash on windows'
- TARGET_OS='windows'
- ;;
- nt|win*)
- TARGET_OS='windows'
- ;;
- *)
- TARGET_OS='unknown'
- ;;
- esac
- # Windows
- if [ $TARGET_OS == "windows" ]; then
- if [ $(uname -m) == "x86_64" ]; then
- echo "$(tput setaf 2)Windows 64-bit found$(tput sgr0)"
- Processor="64"
- elif [ $(uname -m) == "i386" ]; then
- echo "$(tput setaf 2)Windows 32-bit found$(tput sgr0)"
- Processor="32"
- else
- echo "$(tput setaf 1)Unsupported OS: Windows $(uname -m)"
- echo "Please refer to the notes of build.sh$(tput sgr0)"
- exit 1
- fi
- # Linux
- elif [ $TARGET_OS == "linux" ]; then
- if [ $(uname -m) == "x86_64" ]; then
- echo "$(tput setaf 2)Linux 64-bit found$(tput sgr0)"
- Processor="64"
- elif [[ $(uname -m) == "i386" || $(uname -m) == "i686" ]]; then
- echo "$(tput setaf 2)Linux 32-bit found$(tput sgr0)"
- Processor="32"
- else
- echo "$(tput setaf 1)Unsupported OS: Linux $(uname -m)"
- echo "Please refer to the notes of build.sh$(tput sgr0)"
- exit 1
- fi
- else
- echo "$(tput setaf 1)This script doesn't support your Operating system!"
- echo "Please use Linux 64-bit or Windows 10 64-bit with Linux subsystem / git-bash"
- echo "Read the notes of build.sh$(tput sgr0)"
- exit 1
- fi
- sleep 2
- #### End check if OSTYPE is supported
- #### Prepare bash environment and check if wget, zip and other needed things are available
- # Check wget
- if ! type wget > /dev/null; then
- echo "$(tput setaf 1)Missing 'wget' which is important to run this script"
- echo "Please follow these instructions https://gist.github.com/evanwill/0207876c3243bbb6863e65ec5dc3f058 to install wget$(tput sgr0)"
- exit 2
- fi
- # Check for zip
- if ! type zip > /dev/null; then
- if [ $TARGET_OS == "windows" ]; then
- echo "$(tput setaf 1)Missing 'zip' which is important to run this script"
- echo "Download and install 7z-zip from its official website https://www.7-zip.org/"
- echo "By default, it is installed under the directory /c/Program Files/7-Zip in Windows 10 as my case."
- echo "Run git Bash under Administrator privilege and"
- echo "navigate to the directory /c/Program Files/Git/mingw64/bin,"
- echo "you can run the command $(tput setaf 2)ln -s /c/Program Files/7-Zip/7z.exe zip.exe$(tput sgr0)"
- exit 3
- elif [ $TARGET_OS == "linux" ]; then
- echo "$(tput setaf 1)Missing 'zip' which is important to run this script"
- echo "install it with the command $(tput setaf 2)'sudo apt-get install zip'$(tput sgr0)"
- #sudo apt-get update && apt-get install zip
- exit 3
- fi
- fi
- # Check python ... needed during language build
- if ! type python > /dev/null; then
- if [ $TARGET_OS == "windows" ]; then
- echo "$(tput setaf 1)Missing 'python3' which is important to run this script"
- exit 4
- elif [ $TARGET_OS == "linux" ]; then
- echo "$(tput setaf 1)Missing 'python' which is important to run this script"
- echo "As Python 2.x will not be maintained from 2020 please,"
- echo "install it with the command $(tput setaf 2)'sudo apt-get install python3'."
- echo "Check which version of Python3 has been installed using 'ls /usr/bin/python3*'"
- echo "Use 'sudo ln -sf /usr/bin/python3.x /usr/bin/python' (where 'x' is your version number) to make it default.$(tput sgr0)"
- #sudo apt-get update && apt-get install python3 && ln -sf /usr/bin/python3 /usr/bin/python
- exit 4
- fi
- fi
- # Check gawk ... needed during language build
- if ! type gawk > /dev/null; then
- if [ $TARGET_OS == "linux" ]; then
- echo "$(tput setaf 1)Missing 'gawk' which is important to run this script"
- echo "install it with the command $(tput setaf 2)'sudo apt-get install gawk'."
- #sudo apt-get update && apt-get install gawk
- exit 5
- fi
- fi
- #### End prepare bash / Linux environment
- # Check for options/flags
- while getopts b:c:d:f:g:h:i:j:l:m:n:o:p:v:x:?h flag
- do
- case "${flag}" in
- b) build_flag=${OPTARG};;
- c) clean_flag=${OPTARG};;
- d) devel_flag=${OPTARG};;
- f) board_flash_flag=${OPTARG};;
- g) graphics_flag=${OPTARG};;
- h) help_flag=1;;
- i) IDE_flag=${OPTARG};;
- j) verbose_IDE_flag=${OPTARG};;
- l) language_flag=${OPTARG};;
- m) mk404_flag=${OPTARG};;
- n) new_build_flag=${OPTARG};;
- o) output_flag=${OPTARG};;
- p) prusa_flag=${OPTARG};;
- v) variant_flag=${OPTARG};;
- x) board_mem_flag=${OPTARG};;
- ?) help_flag=1;;
- esac
- done
- #
- # '?' 'h' argument usage and help
- if [ "$help_flag" == "1" ] ; then
- echo "***************************************"
- echo "* PF-build.sh Version: 2.0.0-Build_56 *"
- echo "***************************************"
- echo "Arguments:"
- echo "$(tput setaf 2)-b$(tput sgr0) Build/commit number '$(tput setaf 2)Auto$(tput sgr0)' needs git or a number"
- echo "$(tput setaf 2)-c$(tput sgr0) Do not clean up lang build'$(tput setaf 2)0$(tput sgr0)' no '$(tput setaf 2)1$(tput sgr0)' yes"
- echo "$(tput setaf 2)-d$(tput sgr0) Devel build '$(tput setaf 2)GOLD$(tput sgr0)', '$(tput setaf 2)RC$(tput sgr0)', '$(tput setaf 2)BETA$(tput sgr0)', '$(tput setaf 2)ALPHA$(tput sgr0)', '$(tput setaf 2)DEBUG$(tput sgr0)', '$(tput setaf 2)DEVEL$(tput sgr0)' and '$(tput setaf 2)UNKNOWN$(tput sgr0)'"
- echo "$(tput setaf 2)-f$(tput sgr0) Board flash size '$(tput setaf 2)256$(tput sgr0)','$(tput setaf 2)384$(tput sgr0)','$(tput setaf 2)512$(tput sgr0)','$(tput setaf 2)1024$(tput sgr0)''$(tput setaf 2)32M$(tput sgr0)'"
- echo "$(tput setaf 2)-g$(tput sgr0) Start MK404 grafics '$(tput setaf 2)0$(tput sgr0)' no '$(tput setaf 2)1$(tput sgr0)' lite '$(tput setaf 2)2$(tput sgr0)' fancy"
- echo "$(tput setaf 2)-h$(tput sgr0) Help"
- echo "$(tput setaf 2)-i$(tput sgr0) Arduino IDE version '$(tput setaf 2)1.8.5$(tput sgr0)', '$(tput setaf 2)1.8.13$(tput sgr0)'"
- echo "$(tput setaf 2)-j$(tput sgr0) Arduino IDE verbose output '$(tput setaf 2)0$(tput sgr0)', '$(tput setaf 2)1$(tput sgr0) active'"
- echo "$(tput setaf 2)-l$(tput sgr0) Languages '$(tput setaf 2)ALL$(tput sgr0)' for multi language or '$(tput setaf 2)EN_ONLY$(tput sgr0)' for English only"
- echo "$(tput setaf 2)-m$(tput sgr0) Start MK404 sim '$(tput setaf 2)0$(tput sgr0)' no '$(tput setaf 2)1$(tput sgr0)' yes '$(tput setaf 2)2$(tput sgr0)' with MMU2"
- echo "$(tput setaf 2)-n$(tput sgr0) New fresh build '$(tput setaf 2)0$(tput sgr0)' no '$(tput setaf 2)1$(tput sgr0)' yes"
- echo "$(tput setaf 2)-o$(tput sgr0) Output '$(tput setaf 2)1$(tput sgr0)' force or '$(tput setaf 2)0$(tput sgr0)' block output and delays"
- echo "$(tput setaf 2)-p$(tput sgr0) Keep Configuration_prusa.h '$(tput setaf 2)0$(tput sgr0)' no '$(tput setaf 2)1$(tput sgr0)' yes"
- echo "$(tput setaf 2)-v$(tput sgr0) Variant '$(tput setaf 2)All$(tput sgr0)' or variant file name"
- echo "$(tput setaf 2)-x$(tput sgr0) Board memory size '$(tput setaf 2)8$(tput sgr0)' or '$(tput setaf 2)64$(tput sgr0)' Kb."
- echo "$(tput setaf 2)-?$(tput sgr0) Help"
- echo
- echo "Brief USAGE:"
- echo " $(tput setaf 2)./PF-build.sh$(tput sgr0) [-v] [-l] [-d] [-b] [-o] [-c] [-p] [-n]"
- echo
- echo "Example:"
- echo " $(tput setaf 2)./PF-build.sh -v All -l ALL -d GOLD$(tput sgr0)"
- echo " Will build all variants as multi language and final GOLD version"
- echo
- echo " $(tput setaf 2) ./PF-build.sh -v 1_75mm_MK3S-EINSy10a-E3Dv6full.h -b Auto -l ALL -d GOLD -o 1 -c 1 -p 1 -n 1$(tput sgr0)"
- echo " Will build MK3S multi language final GOLD firmware "
- echo " with current commit count number and output extra information,"
- echo " not delete lang build temporary files, keep Configuration_prusa.h and build with new fresh build folder."
- echo
- exit 6
- fi
- #Check if verbose_IDE is selected with argument '-j'
- if [ ! -z "$verbose_IDE_flag" ]; then
- if [ $verbose_IDE_flag == "1" ]; then
- verbose_IDE="1"
- elif [ $verbose_IDE_flag == "0" ]; then
- verbose_IDE="0"
- else
- echo "Only '0' and '1' are valid verbose_IDE values."
- exit
- fi
- else
- verbose_IDE="0"
- fi
- #Check if Build is selected with argument '-f'
- if [ ! -z "$board_flash_flag" ] ; then
- if [ "$board_flash_flag" == "256" ] ; then
- BOARD_FLASH="0x3FFFF"
- BOARD_maximum_size="253952"
- echo "Board flash size : $board_flash_flag Kb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
- elif [ "$board_flash_flag" == "384" ] ; then
- BOARD_FLASH="0x5FFFF"
- BOARD_maximum_size="385024"
- echo "Board flash size : $board_flash_flag Kb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
- elif [ "$board_flash_flag" == "512" ] ; then
- BOARD_FLASH="0x7FFFF"
- BOARD_maximum_size="516096"
- echo "Board flash size : $board_flash_flag Kb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
- elif [ "$board_flash_flag" == "1024" ] ; then
- BOARD_FLASH="0xFFFFF"
- BOARD_maximum_size="1040384"
- echo "Board flash size : $board_flash_flag Kb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
- elif [[ "$board_flash_flag" == "32M" || "$board_flash_flag" == "32768" ]] ; then
- BOARD_FLASH="0x1FFFFFF"
- BOARD_maximum_size="33546240"
- echo "Board flash size : 32 Mb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
- else
- echo "Unsupported board flash size chosen. Only '256', '384', '512', '1024' and '32M' are allowed."
- exit 7
- fi
- fi
- #Check if Build is selected with argument '-x'
- if [ ! -z "$board_mem_flag" ] ; then
- if [ "$board_mem_flag" == "8" ] ; then
- BOARD_MEM="0x21FF"
- echo "Board mem size : $board_mem_flag Kb, $BOARD_MEM (hex)"
- elif [ "$board_mem_flag" == "64" ] ; then
- BOARD_MEM="0xFFFF"
- echo "Board mem size : $board_mem_flag Kb, $BOARD_MEM (hex)"
- else
- echo "Unsupported board mem size chosen. Only '8', '64' are allowed."
- exit 8
- fi
- fi
- #Check if Arduino IDE version is correct
- if [ ! -z "$IDE_flag" ]; then
- if [[ "$IDE_flag" == "1.8.5" || "$IDE_flag" == "1.8.13" ]]; then
- ARDUINO_ENV="${IDE_flag}"
- else
- ARDUINO_ENV="1.8.5"
- fi
- else
- ARDUINO_ENV="1.8.5"
- fi
- #### Set build environment
- BUILD_ENV="1.0.6"
- BOARD="prusa_einsy_rambo"
- BOARD_PACKAGE_NAME="PrusaResearch"
- BOARD_VERSION="1.0.3"
- #BOARD_URL="https://raw.githubusercontent.com/3d-gussner/Arduino_Boards/master/IDE_Board_Manager/package_prusa3d_index.json"
- BOARD_URL="https://raw.githubusercontent.com/prusa3d/Arduino_Boards/master/IDE_Board_Manager/package_prusa3d_index.json"
- BOARD_FILENAME="prusa3dboards"
- #BOARD_FILE_URL="https://raw.githubusercontent.com/3d-gussner/Arduino_Boards/master/IDE_Board_Manager/prusa3dboards-1.0.3.tar.bz2"
- BOARD_FILE_URL="https://raw.githubusercontent.com/prusa3d/Arduino_Boards/master/IDE_Board_Manager/prusa3dboards-1.0.3.tar.bz2"
- #PF_BUILD_FILE_URL="https://github.com/3d-gussner/PF-build-env-1/releases/download/$BUILD_ENV-WinLin/PF-build-env-WinLin-$BUILD_ENV.zip"
- PF_BUILD_FILE_URL="https://github.com/prusa3d/PF-build-env/releases/download/$BUILD_ENV-WinLin/PF-build-env-WinLin-$BUILD_ENV.zip"
- LIB="PrusaLibrary"
- SCRIPT_PATH="$( cd "$(dirname "$0")" ; pwd -P )"
- # List few useful data
- echo
- echo "Script path :" $SCRIPT_PATH
- echo "OS :" $OS
- echo "OS type :" $TARGET_OS
- echo ""
- echo "Arduino IDE :" $ARDUINO_ENV
- echo "Build env :" $BUILD_ENV
- echo "Board :" $BOARD
- if [ ! -z "$BOARD_FLASH" ] ; then
- echo "Board flash :" $BOARD_FLASH
- fi
- if [ ! -z "$BOARD_MEM" ] ; then
- echo "Board mem :" $BOARD_MEM
- fi
- echo "Package name:" $BOARD_PACKAGE_NAME
- echo "Board v. :" $BOARD_VERSION
- echo "Specific Lib:" $LIB
- echo ""
- #### Start prepare building environment
- #Check if build exists and creates it if not
- if [ ! -d "../PF-build-dl" ]; then
- mkdir ../PF-build-dl || exit 9
- fi
- cd ../PF-build-dl || exit 10
- BUILD_ENV_PATH="$( cd "$(dirname "$0")" ; pwd -P )"
- # Check if PF-build-env-<version> exists and downloads + creates it if not
- # The build environment is based on the supported Arduino IDE portable version with some changes
- if [ ! -d "../PF-build-env-$BUILD_ENV" ]; then
- echo "$(tput setaf 6)PF-build-env-$BUILD_ENV is missing ... creating it now for you$(tput sgr 0)"
- mkdir ../PF-build-env-$BUILD_ENV
- sleep 5
- fi
- # Download and extract supported Arduino IDE depending on OS
- # Windows
- if [ $TARGET_OS == "windows" ]; then
- if [ ! -f "arduino-$ARDUINO_ENV-windows.zip" ]; then
- echo "$(tput setaf 6)Downloading Windows 32/64-bit Arduino IDE portable...$(tput setaf 2)"
- sleep 2
- wget https://downloads.arduino.cc/arduino-$ARDUINO_ENV-windows.zip || exit 8
- echo "$(tput sgr 0)"
- fi
- if [[ ! -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor" && ! -e "../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt" ]]; then
- echo "$(tput setaf 6)Unzipping Windows 32/64-bit Arduino IDE portable...$(tput setaf 2)"
- sleep 2
- unzip arduino-$ARDUINO_ENV-windows.zip -d ../PF-build-env-$BUILD_ENV || exit 9
- mv ../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor
- echo "# arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor" >> ../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
- echo "$(tput sgr0)"
- fi
- fi
- # Linux
- if [ $TARGET_OS == "linux" ]; then
- # 32 or 64 bit version
- if [ ! -f "arduino-$ARDUINO_ENV-linux$Processor.tar.xz" ]; then
- echo "$(tput setaf 6)Downloading Linux $Processor Arduino IDE portable...$(tput setaf 2)"
- sleep 2
- wget --no-check-certificate https://downloads.arduino.cc/arduino-$ARDUINO_ENV-linux$Processor.tar.xz || exit 8
- echo "$(tput sgr 0)"
- fi
- if [[ ! -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor" && ! -e "../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt" ]]; then
- echo "$(tput setaf 6)Unzipping Linux $Processor Arduino IDE portable...$(tput setaf 2)"
- sleep 2
- tar -xvf arduino-$ARDUINO_ENV-linux$Processor.tar.xz -C ../PF-build-env-$BUILD_ENV/ || exit 9
- mv ../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor
- echo "# arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor" >> ../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
- echo "$(tput sgr0)"
- fi
- fi
- # Make Arduino IDE portable
- if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/ ]; then
- mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/
- fi
- if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/ ]; then
- mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable
- fi
- if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/output/ ]; then
- mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/output
- fi
- if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/ ]; then
- mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages
- fi
- if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/sketchbook/ ]; then
- mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/sketchbook
- fi
- if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/sketchbook/libraries/ ]; then
- mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/sketchbook/libraries
- fi
- if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/staging/ ]; then
- mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/staging
- fi
- # Change Arduino IDE preferences
- if [ ! -e ../PF-build-env-$BUILD_ENV/Preferences-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt ]; then
- echo "$(tput setaf 6)Setting $ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor Arduino IDE preferences for portable GUI usage...$(tput setaf 2)"
- sleep 2
- echo "update.check"
- sed -i 's/update.check = true/update.check = false/g' ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
- echo "board"
- sed -i "s/board = uno/board = $BOARD/g" ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
- echo "editor.linenumbers"
- sed -i 's/editor.linenumbers = false/editor.linenumbers = true/g' ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
- echo "boardsmanager.additional.urls"
- echo "boardsmanager.additional.urls=$BOARD_URL" >>../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
- echo "build.verbose=true" >>../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
- echo "compiler.cache_core=false" >>../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
- echo "compiler.warning_level=all" >>../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
- echo "# Preferences-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor" >> ../PF-build-env-$BUILD_ENV/Preferences-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
- echo "$(tput sgr0)"
- fi
- # Download and extract Prusa Firmware related parts
- # Download and extract PrusaResearchRambo board
- if [ ! -f "$BOARD_FILENAME-$BOARD_VERSION.tar.bz2" ]; then
- echo "$(tput setaf 6)Downloading Prusa Research AVR MK3 RAMBo EINSy build environment...$(tput setaf 2)"
- sleep 2
- wget $BOARD_FILE_URL || exit 10
- fi
- if [[ ! -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr/$BOARD_VERSION" || ! -e "../PF-build-env-$BUILD_ENV/$BOARD_FILENAME-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt" ]]; then
- echo "$(tput setaf 6)Unzipping $BOARD_PACKAGE_NAME Arduino IDE portable...$(tput setaf 2)"
- sleep 2
- tar -xvf $BOARD_FILENAME-$BOARD_VERSION.tar.bz2 -C ../PF-build-env-$BUILD_ENV/ || exit 11
- if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME ]; then
- mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME
- fi
- if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME ]; then
- mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME
- fi
- if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware ]; then
- mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware
- fi
- if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr ]; then
- mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr
- fi
-
- mv ../PF-build-env-$BUILD_ENV/$BOARD_FILENAME-$BOARD_VERSION ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr/$BOARD_VERSION
- echo "# $BOARD_FILENAME-$BOARD_VERSION" >> ../PF-build-env-$BUILD_ENV/$BOARD_FILENAME-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
- echo "$(tput sgr 0)"
- fi
- # Download and extract Prusa Firmware specific library files
- if [ ! -f "PF-build-env-WinLin-$BUILD_ENV.zip" ]; then
- echo "$(tput setaf 6)Downloading Prusa Firmware build environment...$(tput setaf 2)"
- sleep 2
- wget $PF_BUILD_FILE_URL || exit 12
- echo "$(tput sgr 0)"
- fi
- if [ ! -e "../PF-build-env-$BUILD_ENV/PF-build-env-$BUILD_ENV-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt" ]; then
- echo "$(tput setaf 6)Unzipping Prusa Firmware build environment...$(tput setaf 2)"
- sleep 2
- unzip -o PF-build-env-WinLin-$BUILD_ENV.zip -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor || exit 13
- echo "# PF-build-env-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor-$BUILD_ENV" >> ../PF-build-env-$BUILD_ENV/PF-build-env-$BUILD_ENV-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
- echo "$(tput sgr0)"
- fi
- # Check if User updated Arduino IDE 1.8.5 boardsmanager and tools
- if [ -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/arduino/tools" ]; then
- echo "$(tput setaf 6)Arduino IDE boards / tools have been manually updated...$"
- echo "Please don't update the 'Arduino AVR boards' as this will prevent running this script (tput setaf 2)"
- sleep 2
- fi
- if [ -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/arduino/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2" ]; then
- echo "$(tput setaf 6)PrusaReasearch compatible tools have been manually updated...$(tput setaf 2)"
- sleep 2
- echo "$(tput setaf 6)Copying Prusa Firmware build environment to manually updated boards / tools...$(tput setaf 2)"
- sleep 2
- cp -f ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/hardware/tools/avr/avr/lib/ldscripts/avr6.xn ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/arduino/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/avr/lib/ldscripts/avr6.xn
- echo "# PF-build-env-portable-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor-$BUILD_ENV" >> ../PF-build-env-$BUILD_ENV/PF-build-env-portable-$BUILD_ENV-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
- echo "$(tput sgr0)"
- fi
- if [ -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2" ]; then
- echo "$(tput setaf 1)Arduino IDE tools have been updated manually to a non supported version!!!"
- echo "Delete ../PF-build-env-$BUILD_ENV and start the script again"
- echo "Script will not continue until this have been fixed $(tput setaf 2)"
- sleep 2
- echo "$(tput sgr0)"
- exit 14
- fi
- #### End prepare building
- #### Start
- cd $SCRIPT_PATH
- # Check if git is available
- if type git > /dev/null; then
- git_available="1"
- fi
- #
- # '-v' argument defines which variant of the Prusa Firmware will be compiled
- if [ -z "$variant_flag" ] ; then
- # Select which variant of the Prusa Firmware will be compiled, like
- PS3="Select a variant: "
- while IFS= read -r -d $'\0' f; do
- options[i++]="$f"
- done < <(find Firmware/variants/ -maxdepth 1 -type f -name "*.h" -print0 )
- select opt in "${options[@]}" "All" "Quit"; do
- case $opt in
- *.h)
- VARIANT=$(basename "$opt" ".h")
- VARIANTS[i++]="$opt"
- break
- ;;
- "All")
- VARIANT="All"
- VARIANTS=${options[*]}
- break
- ;;
- "Quit")
- echo "You chose to stop"
- exit 22
- ;;
- *)
- echo "$(tput setaf 1)This is not a valid variant$(tput sgr0)"
- ;;
- esac
- done
- else
- if [ -f "$SCRIPT_PATH/Firmware/variants/$variant_flag" ] ; then
- VARIANTS=$variant_flag
- elif [ "$variant_flag" == "All" ] ; then
- while IFS= read -r -d $'\0' f; do
- options[i++]="$f"
- done < <(find Firmware/variants/ -maxdepth 1 -type f -name "*.h" -print0 )
- VARIANT="All"
- VARIANTS=${options[*]}
- else
- echo "$(tput setaf 1)Argument $variant_flag could not be found in Firmware/variants please choose a valid one.$(tput sgr0)"
- echo "Only $(tput setaf 2)'All'$(tput sgr0) and file names below are allowed as variant '-v' argument.$(tput setaf 2)"
- ls -1 $SCRIPT_PATH/Firmware/variants/*.h | xargs -n1 basename
- echo "$(tput sgr0)"
- exit 23
- fi
- fi
- #'-l' argument defines if it is an English only version. Known values EN_ONLY / ALL
- #Check default language mode
- MULTI_LANGUAGE_CHECK=$(grep --max-count=1 "^#define LANG_MODE *" $SCRIPT_PATH/Firmware/config.h|sed -e's/ */ /g'|cut -d ' ' -f3)
- if [ -z "$language_flag" ] ; then
- PS3="Select a language: "
- echo
- echo "Which lang-build do you want?"
- select yn in "Multi languages" "English only"; do
- case $yn in
- "Multi languages")
- LANGUAGES="ALL"
- break
- ;;
- "English only")
- LANGUAGES="EN_ONLY"
- break
- ;;
- *)
- echo "$(tput setaf 1)This is not a valid language$(tput sgr0)"
- ;;
- esac
- done
- else
- if [[ "$language_flag" == "ALL" || "$language_flag" == "EN_ONLY" ]] ; then
- LANGUAGES=$language_flag
- else
- echo "$(tput setaf 1)Language argument is wrong!$(tput sgr0)"
- echo "Only $(tput setaf 2)'ALL'$(tput sgr0) or $(tput setaf 2)'EN_ONLY'$(tput sgr0) are allowed as language '-l' argument!"
- exit 24
- fi
- fi
- #Check if DEV_STATUS is selected via argument '-d'
- if [ ! -z "$devel_flag" ] ; then
- if [[ "$devel_flag" == "GOLD" || "$devel_flag" == "RC" || "$devel_flag" == "BETA" || "$devel_flag" == "ALPHA" || "$devel_flag" == "DEVEL" || "$devel_flag" == "DEBUG" || "$devel_flag" == "UNKNOWN" ]] ; then
- DEV_STATUS_SELECTED=$devel_flag
- elif [[ "$devel_flag" == "atmega404" || "$devel_flag" == "atmega404_no_bootloader" ]] ; then
- MK404_DEBUG=$devel_flag
- else
- echo "$(tput setaf 1)Development argument is wrong!$(tput sgr0)"
- echo "Only $(tput setaf 2)'GOLD', 'RC', 'BETA', 'ALPHA', 'DEVEL', 'DEBUG' or 'UNKNOWN' $(tput sgr0) are allowed as devel '-d' argument!$(tput sgr0)"
- exit 25
- fi
- fi
- #Check if Build is selected via argument '-b'
- if [ ! -z "$build_flag" ] ; then
- if [[ "$build_flag" == "Auto" && "$git_available" == "1" ]] ; then
- echo "Build changed to $build_flag"
- BUILD=$(git rev-list --count HEAD)
- elif [[ $build_flag =~ ^[0-9]+$ ]] ; then
- BUILD=$build_flag
- else
- echo "$(tput setaf 1)Build number argument is wrong!$(tput sgr0)"
- echo "Only $(tput setaf 2)'Auto' (git needed) or numbers $(tput sgr0) are allowed as build '-b' argument!$(tput sgr0)"
- exit 26
- fi
- echo "New Build number is: $BUILD"
- fi
- # check if script has been started with arguments
- if [[ "$#" -eq "0" || "$output_flag" == 1 ]] ; then
- OUTPUT=1
- else
- OUTPUT=0
- fi
- #echo "Output is:" $OUTPUT
- #Check git branch has changed
- if [ ! -z "git_available" ]; then
- BRANCH=""
- CLEAN_PF_FW_BUILD=0
- else
- BRANCH=$(git branch --show-current)
- echo "Current branch is:" $BRANCH
- if [ ! -f "$SCRIPT_PATH/../PF-build.branch" ]; then
- echo "$BRANCH" >| $SCRIPT_PATH/../PF-build.branch
- echo "created PF-build.branch file"
- else
- PRE_BRANCH=$(cat "$SCRIPT_PATH/../PF-build.branch")
- echo "Previous branch was:" $PRE_BRANCH
- if [ ! "$BRANCH" == "$PRE_BRANCH" ] ; then
- CLEAN_PF_FW_BUILD=1
- echo "$BRANCH" >| $SCRIPT_PATH/../PF-build.branch
- fi
- fi
- fi
- #Set BUILD_ENV_PATH
- cd ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor || exit 27
- BUILD_ENV_PATH="$( pwd -P )"
- cd ../..
- #Checkif BUILD_PATH exists and if not creates it
- if [ ! -d "Prusa-Firmware-build" ]; then
- mkdir Prusa-Firmware-build || exit 28
- fi
- #Set the BUILD_PATH for Arduino IDE
- cd Prusa-Firmware-build || exit 29
- BUILD_PATH="$( pwd -P )"
- #Check git branch has changed
- if [ "$CLEAN_PF_FW_BUILD" == "1" ]; then
- read -t 10 -p "Branch changed, cleaning Prusa-Firmware-build folder"
- rm -r *
- else
- echo "Nothing to clean up"
- fi
- for v in ${VARIANTS[*]}
- do
- VARIANT=$(basename "$v" ".h")
- MK404_PRINTER=$(grep --max-count=1 "\bPRINTER_TYPE\b" $SCRIPT_PATH/Firmware/variants/$VARIANT.h | sed -e's/ */ /g' |cut -d ' ' -f3 | cut -d '_' -f2)
- # Find firmware version in Configuration.h file and use it to generate the hex filename
- FW_MAJOR=$(grep --max-count=1 "\bFW_MAJOR\b" $SCRIPT_PATH/Firmware/Configuration.h | sed -e's/ */ /g'|cut -d ' ' -f3)
- FW_MINOR=$(grep --max-count=1 "\bFW_MINOR\b" $SCRIPT_PATH/Firmware/Configuration.h | sed -e's/ */ /g'|cut -d ' ' -f3)
- FW_REVISION=$(grep --max-count=1 "\bFW_REVISION\b" $SCRIPT_PATH/Firmware/Configuration.h| sed -e's/ */ /g'|cut -d ' ' -f3)
- FW="$FW_MAJOR$FW_MINOR$FW_REVISION"
- #FW=$(grep --max-count=1 "\bFW_VERSION\b" $SCRIPT_PATH/Firmware/Configuration.h | sed -e's/ */ /g'|cut -d '"' -f2|sed 's/\.//g')
- if [ -z "$BUILD" ] ; then
- # Find build version in Configuration.h file and use it to generate the hex filename
- BUILD=$(grep --max-count=1 "\bFW_COMMIT_NR\b" $SCRIPT_PATH/Firmware/Configuration.h | sed -e's/ */ /g'|cut -d ' ' -f3)
- else
- # Find and replace build version in Configuration.h file
- BUILD_ORG=$(grep --max-count=1 "\bFW_COMMIT_NR\b" $SCRIPT_PATH/Firmware/Configuration.h | sed -e's/ */ /g'|cut -d ' ' -f3)
- echo "Original build number: $BUILD_ORG"
- sed -i -- "s/^#define FW_COMMIT_NR.*/#define FW_COMMIT_NR $BUILD/g" $SCRIPT_PATH/Firmware/Configuration.h
- fi
- # Check if the motherboard is an EINSY and if so only one hex file will generated
- MOTHERBOARD=$(grep --max-count=1 "\bMOTHERBOARD\b" $SCRIPT_PATH/Firmware/variants/$VARIANT.h | sed -e's/ */ /g' |cut -d ' ' -f3)
- # Check development status
- FW_FLAV=$(grep --max-count=1 "//#define FW_FLAVOR\b" $SCRIPT_PATH/Firmware/Configuration.h|cut -d ' ' -f1)
- if [[ "$FW_FLAV" != "//#define" ]] ; then
- FW_FLAVOR=$(grep --max-count=1 "\bFW_FLAVOR\b" $SCRIPT_PATH/Firmware/Configuration.h| sed -e's/ */ /g'|cut -d ' ' -f3)
- FW_FLAVERSION=$(grep --max-count=1 "\bFW_FLAVERSION\b" $SCRIPT_PATH/Firmware/Configuration.h| sed -e's/ */ /g'|cut -d ' ' -f3)
- if [[ "$FW_FLAVOR" != "//#define FW_FLAVOR" ]] ; then
- FW="$FW-$FW_FLAVOR"
- DEV_CHECK="$FW_FLAVOR"
- if [ ! -z "$FW_FLAVERSION" ] ; then
- FW="$FW$FW_FLAVERSION"
- fi
- fi
- fi
- DEV_CHECK=$(grep --max-count=1 "\bFW_VERSION\b" $SCRIPT_PATH/Firmware/Configuration.h | sed -e's/ */ /g'|cut -d '"' -f2|sed 's/\.//g'|cut -d '-' -f2)
- if [ -z "$DEV_STATUS_SELECTED" ] ; then
- if [[ "$DEV_CHECK" == *"RC"* ]] ; then
- DEV_STATUS="RC"
- elif [[ "$DEV_CHECK" == *"ALPHA"* ]]; then
- DEV_STATUS="ALPHA"
- elif [[ "$DEV_CHECK" == *"BETA"* ]]; then
- DEV_STATUS="BETA"
- elif [[ "$DEV_CHECK" == "DEVEL" ]]; then
- DEV_STATUS="DEVEL"
- elif [[ "$DEV_CHECK" == "DEBUG" ]]; then
- DEV_STATUS="DEBUG"
- else
- DEV_STATUS="UNKNOWN"
- echo
- echo "$(tput setaf 5)DEV_STATUS is UNKNOWN. Do you wish to set DEV_STATUS to GOLD?$(tput sgr0)"
- PS3="Select YES only if source code is tested and trusted: "
- select yn in "Yes" "No"; do
- case $yn in
- Yes)
- DEV_STATUS="GOLD"
- DEV_STATUS_SELECTED="GOLD"
- break
- ;;
- No)
- DEV_STATUS="UNKNOWN"
- DEV_STATUS_SELECTED="UNKNOWN"
- break
- ;;
- *)
- echo "$(tput setaf 1)This is not a valid DEV_STATUS$(tput sgr0)"
- ;;
- esac
- done
- fi
- else
- DEV_STATUS=$DEV_STATUS_SELECTED
- fi
- #Prepare hex files folders
- if [ ! -d "$SCRIPT_PATH/../PF-build-hex/FW$FW-Build$BUILD/$MOTHERBOARD" ]; then
- mkdir -p $SCRIPT_PATH/../PF-build-hex/FW$FW-Build$BUILD/$MOTHERBOARD || exit 28
- fi
- OUTPUT_FOLDER="PF-build-hex/FW$FW-Build$BUILD/$MOTHERBOARD"
- if [ "$BOARD" != "prusa_einsy_rambo" ]; then
- if [ ! -d "$SCRIPT_PATH/../PF-build-hex/FW$FW-Build$BUILD/$BOARD" ]; then
- mkdir -p $SCRIPT_PATH/../PF-build-hex/FW$FW-Build$BUILD/$BOARD || exit 28
- fi
- OUTPUT_FOLDER="PF-build-hex/FW$FW-Build$BUILD/$BOARD"
- fi
-
- #Check if exactly the same hexfile already exists
- if [[ -f "$SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.hex" && "$LANGUAGES" == "ALL" ]]; then
- echo ""
- ls -1 $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.hex | xargs -n1 basename
- echo "$(tput setaf 6)This hex file to be compiled already exists! To cancel this process press CRTL+C and rename existing hex file.$(tput sgr 0)"
- if [ $OUTPUT == "1" ] ; then
- read -t 10 -p "Press Enter to continue..."
- fi
- elif [[ -f "$SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-EN_ONLY.hex" && "$LANGUAGES" == "EN_ONLY" ]]; then
- echo ""
- ls -1 $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-EN_ONLY.hex | xargs -n1 basename
- echo "$(tput setaf 6)This hex file to be compiled already exists! To cancel this process press CRTL+C and rename existing hex file.$(tput sgr 0)"
- if [ $OUTPUT == "1" ] ; then
- read -t 10 -p "Press Enter to continue..."
- fi
- fi
- if [[ -f "$SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.zip" && "$LANGUAGES" == "ALL" ]]; then
- echo ""
- ls -1 $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.zip | xargs -n1 basename
- echo "$(tput setaf 6)This zip file to be compiled already exists! To cancel this process press CRTL+C and rename existing hex file.$(tput sgr 0)"
- if [ $OUTPUT == "1" ] ; then
- read -t 10 -p "Press Enter to continue..."
- fi
- fi
-
- #List some useful data
- echo "$(tput setaf 2)$(tput setab 7) "
- echo "Printer :" $MK404_PRINTER
- echo "Variant :" $VARIANT
- echo "Firmware :" $FW
- echo "Build # :" $BUILD
- echo "Dev Check :" $DEV_CHECK
- echo "DEV Status :" $DEV_STATUS
- echo "Motherboard:" $MOTHERBOARD
- echo "Board flash:" $BOARD_FLASH
- echo "Board mem :" $BOARD_MEM
- echo "Languages :" $LANGUAGES
- echo "Hex-file Folder:" $OUTPUT_FOLDER
- echo "$(tput sgr0)"
- #Prepare Firmware to be compiled by copying variant as Configuration_prusa.h
- if [ ! -f "$SCRIPT_PATH/Firmware/Configuration_prusa.h" ]; then
- cp -f $SCRIPT_PATH/Firmware/variants/$VARIANT.h $SCRIPT_PATH/Firmware/Configuration_prusa.h || exit 31
- else
- echo "$(tput setaf 6)Configuration_prusa.h already exist it will be overwritten in 10 seconds by the chosen variant.$(tput sgr 0)"
- if [ $OUTPUT == "1" ] ; then
- read -t 10 -p "Press Enter to continue..."
- fi
- cp -f $SCRIPT_PATH/Firmware/variants/$VARIANT.h $SCRIPT_PATH/Firmware/Configuration_prusa.h || exit 31
- fi
- #Prepare Configuration.h to use the correct FW_DEV_VERSION to prevent LCD messages when connecting with OctoPrint
- sed -i -- "s/#define FW_DEV_VERSION FW_VERSION_UNKNOWN/#define FW_DEV_VERSION FW_VERSION_$DEV_STATUS/g" $SCRIPT_PATH/Firmware/Configuration.h
- # set FW_REPOSITORY
- sed -i -- 's/#define FW_REPOSITORY "Unknown"/#define FW_REPOSITORY "Prusa3d"/g' $SCRIPT_PATH/Firmware/Configuration.h
- #Prepare English only or multi-language version to be build
- if [ $LANGUAGES == "EN_ONLY" ]; then
- echo " "
- echo "English only language firmware will be built"
- sed -i -- "s/^#define LANG_MODE *1/#define LANG_MODE 0/g" $SCRIPT_PATH/Firmware/config.h
- echo " "
- else
- echo " "
- echo "Multi-language firmware will be built"
- sed -i -- "s/^#define LANG_MODE *0/#define LANG_MODE 1/g" $SCRIPT_PATH/Firmware/config.h
- echo " "
- fi
-
- #Check if compiler flags are set to Prusa specific needs for the rambo board.
- #if [ $TARGET_OS == "windows" ]; then
- #RAMBO_PLATFORM_FILE="PrusaResearchRambo/avr/platform.txt"
- #fi
- #New fresh PF-Firmware-build
- if [ "$new_build_flag" == "1" ]; then
- rm -r -f $BUILD_PATH/* || exit 54
- fi
- # Prepare Board mem and flash modifications
- ## Check board mem size
- CURRENT_BOARD_MEM=$(grep "#define RAMEND" $BUILD_ENV_PATH/hardware/tools/avr/avr/include/avr/iom2560.h | sed -e's/.* //g'|cut -d ' ' -f3|tr -d $'\n')
- if [ $CURRENT_BOARD_MEM != "0x21FF" ] ; then
- echo "Board mem has been already modified or not reset"
- echo "Current:" $CURRENT_BOARD_MEM
- PS3="Select $(tput setaf 2)Yes$(tput sgr 0) if you want to reset it."
- select yn in "Yes" "No"; do
- case $yn in
- Yes)
- echo "Resetting board mem size"
- sed -i -- "s/^#define RAMEND .*$/#define RAMEND 0x21FF/g" $BUILD_ENV_PATH/hardware/tools/avr/avr/include/avr/iom2560.h
- break
- ;;
- *)
- echo "Continuing with modified mem size"
- break
- ;;
- esac
- done
- fi
- ## Modify board mem size
- if [[ ! -z $BOARD_MEM && "$BOARD_MEM" != "0x21FF" ]] ; then
- echo "$(tput setaf 3)Modifying board memory size (hex):$(tput sgr 0)"
- echo "Old:" $CURRENT_BOARD_MEM
- echo "New:" $BOARD_MEM
- read -t 5 -p "To cancel press $(tput setaf 1)CRTL+C$(tput sgr 0)"
- echo ""
- sed -i -- "s/^#define RAMEND 0x21FF/#define RAMEND ${BOARD_MEM}/g" $BUILD_ENV_PATH/hardware/tools/avr/avr/include/avr/iom2560.h
- fi
- ## Check board flash size
- CURRENT_BOARD_FLASH=$(grep "#define FLASHEND" $BUILD_ENV_PATH/hardware/tools/avr/avr/include/avr/iom2560.h | sed -e's/.* //g'|cut -d ' ' -f3|tr -d $'\n')
- CURRENT_BOARD_maximum_size=$(grep "prusa_einsy_rambo.upload.maximum_size" $BUILD_ENV_PATH/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr/$BOARD_VERSION/boards.txt |cut -d '=' -f2|tr -d $'\n')
- if [[ $CURRENT_BOARD_FLASH != "0x3FFFF" || $CURRENT_BOARD_maximum_size != "253952" ]] ; then
- echo "Board flash has been already modified or not reset"
- echo "Current flash size:" $CURRENT_BOARD_FLASH
- echo "Current max. size:" $CURRENT_BOARD_maximum_size
- PS3="Select $(tput setaf 2)Yes$(tput sgr 0) if you want to reset it."
- select yn in "Yes" "No"; do
- case $yn in
- Yes)
- echo "$(tput setaf 1)Resetting board flash size$(tput sgr 0)"
- sed -i -- "s/^#define FLASHEND .*$/#define FLASHEND 0x3FFFF/g" $BUILD_ENV_PATH/hardware/tools/avr/avr/include/avr/iom2560.h
- sed -i -- "s/^prusa_einsy_rambo.upload.maximum_size.*/prusa_einsy_rambo.upload.maximum_size=253952/g" $BUILD_ENV_PATH/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr/$BOARD_VERSION/boards.txt
- break
- ;;
- *)
- echo "$(tput setaf 3)Continuing with modified flash size$(tput sgr 0)"
- break
- ;;
- esac
- done
- fi
- ## Modify boad flash size
- if [[ ! -z $BOARD_FLASH && "$BOARD_FLASH" != "0x3FFFF" ]] ; then
- echo "Modifying board flash size (hex):"
- echo "Old flash size:" $CURRENT_BOARD_FLASH
- echo "New flash size:" $BOARD_FLASH
- echo "Old max. size:" $CURRENT_BOARD_maximum_size
- echo "New max. size:" $BOARD_maximum_size
- read -t 5 -p "To cancel press $(tput setaf 1)CRTL+C$(tput sgr 0)"
- sed -i -- "s/^#define FLASHEND .*/#define FLASHEND ${BOARD_FLASH}/g" $BUILD_ENV_PATH/hardware/tools/avr/avr/include/avr/iom2560.h
- sed -i -- "s/^prusa_einsy_rambo.upload.maximum_size.*/prusa_einsy_rambo.upload.maximum_size=${BOARD_maximum_size}/g" $BUILD_ENV_PATH/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr/$BOARD_VERSION/boards.txt
- fi
- #Check if compiler flags are set to Prusa specific needs for the rambo board.
- # if [ $TARGET_OS == "windows" ]; then
- # RAMBO_PLATFORM_FILE="PrusaResearchRambo/avr/platform.txt"
- # fi
-
- #### End of Prepare building
-
- #### Start building
-
- export ARDUINO=$BUILD_ENV_PATH
- #echo $BUILD_ENV_PATH
- #export BUILDER=$ARDUINO/arduino-builder
- echo
- #read -t 5 -p "Press Enter..."
- echo
- echo "Start to build Prusa Firmware ..."
- echo "Using variant $VARIANT$(tput setaf 3)"
- if [ $OUTPUT == "1" ] ; then
- sleep 2
- fi
- if [ $verbose_IDE == "1" ]; then
- $BUILD_ENV_PATH/arduino-builder -dump-prefs -debug-level 10 -compile -hardware $ARDUINO/hardware -hardware $ARDUINO/portable/packages -tools $ARDUINO/tools-builder -tools $ARDUINO/hardware/tools/avr -tools $ARDUINO/portable/packages -built-in-libraries $ARDUINO/libraries -libraries $ARDUINO/portable/sketchbook/libraries -fqbn=$BOARD_PACKAGE_NAME:avr:$BOARD -build-path=$BUILD_PATH -warnings=all $SCRIPT_PATH/Firmware/Firmware.ino || exit 41
- fi
- $BUILD_ENV_PATH/arduino-builder -compile -hardware $ARDUINO/hardware -hardware $ARDUINO/portable/packages -tools $ARDUINO/tools-builder -tools $ARDUINO/hardware/tools/avr -tools $ARDUINO/portable/packages -built-in-libraries $ARDUINO/libraries -libraries $ARDUINO/portable/sketchbook/libraries -fqbn=$BOARD_PACKAGE_NAME:avr:$BOARD -build-path=$BUILD_PATH -warnings=all -verbose=$verbose_IDE $SCRIPT_PATH/Firmware/Firmware.ino || exit 42
- echo "$(tput sgr 0)"
- if [ $LANGUAGES == "ALL" ]; then
- echo "$(tput setaf 2)"
- echo "Building multi language firmware" $MULTI_LANGUAGE_CHECK
- echo "$(tput sgr 0)"
- if [ $OUTPUT == "1" ] ; then
- sleep 2
- fi
- cd $SCRIPT_PATH/lang
- echo "$(tput setaf 3)"
- ./config.sh || exit 43
- echo "$(tput sgr 0)"
- # Check if previous languages and firmware build exist and if so clean them up
- if [ -f "lang_en.tmp" ]; then
- echo ""
- echo "$(tput setaf 6)Previous lang build files already exist these will be cleaned up in 10 seconds.$(tput sgr 0)"
- if [ $OUTPUT == "1" ] ; then
- read -t 10 -p "Press Enter to continue..."
- fi
- echo "$(tput setaf 3)"
- ./lang-clean.sh
- echo "$(tput sgr 0)"
- fi
- if [ -f "progmem.out" ]; then
- echo ""
- echo "$(tput setaf 6)Previous firmware build files already exist these will be cleaned up in 10 seconds.$(tput sgr 0)"
- if [ $OUTPUT == "1" ] ; then
- read -t 10 -p "Press Enter to continue..."
- fi
- echo "$(tput setaf 3)"
- ./fw-clean.sh
- echo "$(tput sgr 0)"
- fi
- # build languages
- echo "$(tput setaf 3)"
- ./lang-build.sh || exit 44
- # build community languages
- ./lang-community.sh || exit 45
- # Combine compiled firmware with languages
- ./fw-build.sh || exit 46
- cp not_tran.txt not_tran_$VARIANT.txt
- cp not_used.txt not_used_$VARIANT.txt
- echo "$(tput sgr 0)"
- # Check if the motherboard is an EINSY and if so only one hex file will generated
- MOTHERBOARD=$(grep --max-count=1 "\bMOTHERBOARD\b" $SCRIPT_PATH/Firmware/variants/$VARIANT.h | sed -e's/ */ /g' |cut -d ' ' -f3)
- # If the motherboard is an EINSY just copy one hexfile
- if [ "$MOTHERBOARD" = "BOARD_EINSY_1_0a" ]; then
- echo "$(tput setaf 2)Copying multi language firmware for MK3/Einsy board to PF-build-hex folder$(tput sgr 0)"
- # End of "lang.bin" for MK3 and MK3S copy
- cp -f firmware.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.hex
- cp -f $BUILD_PATH/Firmware.ino.elf $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.elf
- else
- echo "$(tput setaf 2)Zip multi language firmware for MK2.5/miniRAMbo board to PF-build-hex folder$(tput sgr 0)"
- cp -f firmware_cz.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-cz.hex
- cp -f firmware_de.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-de.hex
- cp -f firmware_es.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-es.hex
- cp -f firmware_fr.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-fr.hex
- cp -f firmware_it.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-it.hex
- cp -f firmware_pl.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-pl.hex
- cp -f firmware_nl.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-nl.hex
- cp -f $BUILD_PATH/Firmware.ino.elf $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.elf
- if [ $TARGET_OS == "windows" ]; then
- zip a $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.zip $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-??.hex
- rm $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-??.hex
- elif [ $TARGET_OS == "linux" ]; then
- # Make a copy for MK404 sim of MK2, MK2.5, MK2.5S firmware
- if [ ! -z "$mk404_flag" ]; then
- cp -f firmware_de.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.hex
- fi
- # End of MK2, MK2.5, MK2.5S firmware copy
- zip -m -j ../../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.zip ../../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-??.hex
- fi
- fi
- # Cleanup after build
- if [[ -z "$clean_flag" || "$clean_flag" == "0" ]]; then
- echo "$(tput setaf 3)"
- ./fw-clean.sh || exit 51
- ./lang-clean.sh || exit 52
- echo "$(tput sgr 0)"
- fi
- else
- echo "$(tput setaf 2)Copying English only firmware to PF-build-hex folder$(tput sgr 0)"
- cp -f $BUILD_PATH/Firmware.ino.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-EN_ONLY.hex || exit 47
- echo "$(tput setaf 2)Copying English only elf file to PF-build-hex folder$(tput sgr 0)"
- cp -f $BUILD_PATH/Firmware.ino.elf $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-EN_ONLY.elf || exit 47
- fi
- # Cleanup Firmware
- if [[ -z "$prusa_flag" || "$prusa_flag" == "0" ]]; then
- rm $SCRIPT_PATH/Firmware/Configuration_prusa.h || exit 53
- fi
- # Delete dupblicates
- if find $SCRIPT_PATH/lang/ -name '*RAMBo10a*.txt' -printf 1 -quit | grep -q 1
- then
- rm $SCRIPT_PATH/lang/*RAMBo10a*.txt
- fi
- # MK2 not supported in this branch
- if find $SCRIPT_PATH/lang/ -name '*MK2-RAMBo13a*' -printf 1 -quit | grep -q 1
- then
- rm $SCRIPT_PATH/lang/*MK2-RAMBo13a*.txt
- fi
- if find $SCRIPT_PATH/lang/ -name 'not_tran.txt' -printf 1 -quit | grep -q 1
- then
- rm $SCRIPT_PATH/lang/not_tran.txt
- fi
- if find $SCRIPT_PATH/lang/ -name 'not_used.txt' -printf 1 -quit | grep -q 1
- then
- rm $SCRIPT_PATH/lang/not_used.txt
- fi
- #New fresh PF-Firmware-build
- if [ "$new_build_flag" == "1" ]; then
- rm -r -f $BUILD_PATH/* || exit 54
- fi
- # Restore files to previous state
- sed -i -- "s/^#define FW_DEV_VERSION FW_VERSION_$DEV_STATUS/#define FW_DEV_VERSION FW_VERSION_UNKNOWN/g" $SCRIPT_PATH/Firmware/Configuration.h
- sed -i -- 's/^#define FW_REPOSITORY "Prusa3d"/#define FW_REPOSITORY "Unknown"/g' $SCRIPT_PATH/Firmware/Configuration.h
- if [ ! -z "$BUILD_ORG" ] ; then
- sed -i -- "s/^#define FW_COMMIT_NR.*/#define FW_COMMIT_NR $BUILD_ORG/g" $SCRIPT_PATH/Firmware/Configuration.h
- fi
- echo $MULTI_LANGUAGE_CHECK
- #sed -i -- "s/^#define LANG_MODE * /#define LANG_MODE $MULTI_LANGUAGE_CHECK/g" $SCRIPT_PATH/Firmware/config.h
- sed -i -- "s/^#define LANG_MODE *1/#define LANG_MODE ${MULTI_LANGUAGE_CHECK}/g" $SCRIPT_PATH/Firmware/config.h
- sed -i -- "s/^#define LANG_MODE *0/#define LANG_MODE ${MULTI_LANGUAGE_CHECK}/g" $SCRIPT_PATH/Firmware/config.h
- if [ $OUTPUT == "1" ] ; then
- sleep 5
- fi
- # Restore build env files to previous state
- sed -i -- "s/^#define FLASHEND .*$/#define FLASHEND 0x3FFFF/g" $BUILD_ENV_PATH/hardware/tools/avr/avr/include/avr/iom2560.h
- sed -i -- "s/^prusa_einsy_rambo.upload.maximum_size.*/prusa_einsy_rambo.upload.maximum_size=253952/g" $BUILD_ENV_PATH/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr/$BOARD_VERSION/boards.txt
- sed -i -- "s/^#define RAMEND.*/#define RAMEND 0x21FF/g" $BUILD_ENV_PATH/hardware/tools/avr/avr/include/avr/iom2560.h
- done
- # Switch to hex path and list build files
- cd $SCRIPT_PATH
- echo "$(tput setaf 2) "
- echo " "
- echo "Build done, please use Slic3rPE > 1.41.0 to upload the firmware"
- echo "more information how to flash firmware https://www.prusa3d.com/drivers/ $(tput sgr 0)"
- #### End building
- #### MK404 Simulator
- # Check/compile MK404 sim
- if [ ! -z "$mk404_flag" ]; then
- ./MK404-build.sh -c1 || exit 61
- # For Prusa MK2, MK2.5/S
- if [ "$MOTHERBOARD" == "BOARD_RAMBO_MINI_1_3" ]; then
- MK404_PRINTER="${MK404_PRINTER}_mR13"
- else
- if [[ "$mk404_flag" == "2" || "$mk404_flag" == "MMU2" || "$mk404_flag" == "MMU2S" ]]; then # Check if MMU2 is selected only for MK3/S
- MK404_PRINTER="${MK404_PRINTER}MMU2"
- fi
- fi
- # Run MK404 with 'debugcore' and/or 'bootloader-file'
- if [[ ! -z $MK404_DEBUG && "$MK404_DEBUG" == "atmega404" || ! -z $BOARD_MEM && "$BOARD_MEM" == "0xFFFF" ]]; then
- MK404_options="--debugcore"
- fi
- if [[ ! -z $MK404_DEBUG && "$MK404_DEBUG" == "atmega404_no_bootloader" || ! -z $BOARD_FLASH && "$BOARD_FLASH" != "0x3FFFF" ]]; then
- MK404_options='--debugcore --bootloader-file ""'
- fi
- # Run MK404 with grafics
- if [ ! -z "$graphics_flag" ]; then
- if [ ! -z "$MK404_options" ]; then
- MK404_options="${MK404_options} --colour-extrusion --extrusion Quad_HR -g "
- else
- MK404_options="--colour-extrusion --extrusion Quad_HR -g "
- fi
- if [[ "$graphics_flag" == "1" || "$graphics_flag" == "lite" ]]; then
- MK404_options="${MK404_options}lite"
- elif [[ "$graphics_flag" == "2" || "$graphics_flag" == "fancy" ]]; then
- MK404_options="${MK404_options}fancy"
- else
- echo "$(tput setaf 1)Unsupported MK404 graphics option $graphics_flag$(tput sgr 0)"
- fi
- fi
- # Output some useful data
- echo "Printer: $MK404_PRINTER"
- echo "Options: $MK404_options"
- echo ""
- read -t 5 -p "Press $(tput setaf 2)Enter$(tput sgr 0) to start MK404"
- echo ""
- # Change to MK404 build folder
- cd ../MK404/master/build
- #Decide which hex file to use EN_ONLY or Multi language
- if [ "$LANGUAGES" == "ALL" ]; then
- MK404_firmware_file=$SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.hex
- else
- MK404_firmware_file=$SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-EN_ONLY.hex
- fi
- # Start MK404
- # default with serial output and terminal to manipulate it via terminal
- echo ""
- echo "./MK404 Prusa_$MK404_PRINTER -s --terminal $MK404_options -f $MK404_firmware_file"
- sleep 5
- ./MK404 Prusa_$MK404_PRINTER -s --terminal $MK404_options -f $MK404_firmware_file || exit 62
- fi
- #### End of MK404 Simulator
|