language_en.h 19 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305
  1. /**
  2. * English
  3. *
  4. * LCD Menu Messages
  5. * Please note these are limited to 17 characters!
  6. *
  7. */
  8. #define(length=20) WELCOME_MSG CUSTOM_MENDEL_NAME " ready."
  9. #define MSG_SD_INSERTED "Card inserted"
  10. #define MSG_SD_REMOVED "Card removed"
  11. #define MSG_MAIN "Main"
  12. #define MSG_DISABLE_STEPPERS "Disable steppers"
  13. #define MSG_AUTO_HOME "Auto home"
  14. #define MSG_SET_HOME_OFFSETS "Set home offsets"
  15. #define MSG_SET_ORIGIN "Set origin"
  16. #define MSG_COOLDOWN "Cooldown"
  17. #define MSG_SWITCH_PS_ON "Switch power on"
  18. #define MSG_SWITCH_PS_OFF "Switch power off"
  19. #define MSG_MOVE_AXIS "Move axis"
  20. #define MSG_MOVE_X "Move X"
  21. #define MSG_MOVE_Y "Move Y"
  22. #define MSG_MOVE_Z "Move Z"
  23. #define MSG_MOVE_E "Extruder"
  24. #define MSG_SPEED "Speed"
  25. #define MSG_NOZZLE "Nozzle"
  26. #define MSG_NOZZLE1 "Nozzle2"
  27. #define MSG_NOZZLE2 "Nozzle3"
  28. #define MSG_BED "Bed"
  29. #define(length=14) MSG_FAN_SPEED "Fan speed"
  30. #define MSG_FLOW "Flow"
  31. #define MSG_FLOW0 "Flow 0"
  32. #define MSG_FLOW1 "Flow 1"
  33. #define MSG_FLOW2 "Flow 2"
  34. #define MSG_CONTROL "Control"
  35. #define MSG_MIN " \002 Min"
  36. #define MSG_MAX " \002 Max"
  37. #define MSG_FACTOR " \002 Fact"
  38. #define MSG_TEMPERATURE "Temperature"
  39. #define MSG_MOTION "Motion"
  40. #define MSG_VOLUMETRIC "Filament"
  41. #define MSG_VOLUMETRIC_ENABLED "E in mm3"
  42. #define MSG_STORE_EPROM "Store memory"
  43. #define MSG_LOAD_EPROM "Load memory"
  44. #define MSG_RESTORE_FAILSAFE "Restore failsafe"
  45. #define MSG_REFRESH "\xF8" "Refresh"
  46. #define MSG_WATCH "Info screen"
  47. #define MSG_TUNE "Tune"
  48. #define MSG_PAUSE_PRINT "Pause print"
  49. #define MSG_RESUME_PRINT "Resume print"
  50. #define MSG_STOP_PRINT "Stop print"
  51. #define MSG_CARD_MENU "Print from SD"
  52. #define MSG_NO_CARD "No SD card"
  53. #define MSG_DWELL "Sleep..."
  54. #define MSG_USERWAIT "Wait for user..."
  55. #define MSG_RESUMING "Resuming print"
  56. #define(length=20) MSG_PRINT_ABORTED "Print aborted"
  57. #define MSG_NO_MOVE "No move."
  58. #define MSG_KILLED "KILLED. "
  59. #define MSG_STOPPED "STOPPED. "
  60. #define MSG_FILAMENTCHANGE "Change filament"
  61. #define MSG_INIT_SDCARD "Init. SD card"
  62. #define MSG_CNG_SDCARD "Change SD card"
  63. #define MSG_BABYSTEP_X "Babystep X"
  64. #define MSG_BABYSTEP_Y "Babystep Y"
  65. #define MSG_BABYSTEP_Z "Live adjust Z"
  66. #define MSG_ADJUSTZ "Auto adjust Z?"
  67. #define MSG_PICK_Z "Pick print"
  68. #define MSG_SETTINGS "Settings"
  69. #define MSG_PREHEAT "Preheat"
  70. #define(length=17) MSG_UNLOAD_FILAMENT "Unload filament"
  71. #define(length=17) MSG_LOAD_FILAMENT "Load filament"
  72. #define(length=17) MSG_LOAD_FILAMENT_1 "Load filament 1"
  73. #define(length=17) MSG_LOAD_FILAMENT_2 "Load filament 2"
  74. #define(length=17) MSG_LOAD_FILAMENT_3 "Load filament 3"
  75. #define(length=17) MSG_LOAD_FILAMENT_4 "Load filament 4"
  76. #define(length=17) MSG_UNLOAD_FILAMENT_1 "Unload filament 1"
  77. #define(length=17) MSG_UNLOAD_FILAMENT_2 "Unload filament 2"
  78. #define(length=17) MSG_UNLOAD_FILAMENT_3 "Unload filament 3"
  79. #define(length=17) MSG_UNLOAD_FILAMENT_4 "Unload filament 4"
  80. #define MSG_UNLOAD_ALL "Unload all"
  81. #define MSG_LOAD_ALL "Load all"
  82. #define MSG_RECTRACT "Rectract"
  83. #define MSG_ERROR "ERROR:"
  84. #define(length=20) MSG_PREHEAT_NOZZLE "Preheat the nozzle!"
  85. #define MSG_SUPPORT "Support"
  86. #define(length=20) MSG_CORRECTLY "Changed correctly?"
  87. #define MSG_YES "Yes"
  88. #define MSG_NO "No"
  89. #define(length=19) MSG_NOT_LOADED "Filament not loaded"
  90. #define MSG_NOT_COLOR "Color not clear"
  91. #define(length=20) MSG_LOADING_FILAMENT "Loading filament"
  92. #define(length=20) MSG_PLEASE_WAIT "Please wait"
  93. #define MSG_LOADING_COLOR "Loading color"
  94. #define MSG_CHANGE_SUCCESS "Change success!"
  95. #define(length=20) MSG_PRESS "and press the knob"
  96. #define(length=20) MSG_INSERT_FILAMENT "Insert filament"
  97. #define(length=20) MSG_CHANGING_FILAMENT "Changing filament!"
  98. #define MSG_SILENT_MODE_ON "Mode [silent]"
  99. #define MSG_SILENT_MODE_OFF "Mode [high power]"
  100. #define(length=20) MSG_REBOOT "Reboot the printer"
  101. #define(length=20) MSG_TAKE_EFFECT " for take effect"
  102. #define MSG_Enqueing "enqueing \""
  103. #define MSG_POWERUP "PowerUp"
  104. #define MSG_CONFIGURATION_VER " Last Updated: "
  105. #define MSG_FREE_MEMORY " Free Memory: "
  106. #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
  107. #define MSG_OK "ok"
  108. #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
  109. #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
  110. #define MSG_BEGIN_FILE_LIST "Begin file list"
  111. #define MSG_END_FILE_LIST "End file list"
  112. #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
  113. #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
  114. #define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
  115. #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
  116. #define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
  117. #define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
  118. #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
  119. #define MSG_HEATING "Heating"
  120. #define(length=20) MSG_HEATING_COMPLETE "Heating done."
  121. #define MSG_BED_HEATING "Bed Heating"
  122. #define MSG_BED_DONE "Bed done"
  123. #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
  124. #define MSG_ERR_KILLED "Printer halted. kill() called!"
  125. #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
  126. #define MSG_RESEND "Resend: "
  127. #define MSG_M119_REPORT "Reporting endstop status"
  128. #define MSG_ENDSTOP_HIT "TRIGGERED"
  129. #define MSG_ENDSTOP_OPEN "open"
  130. #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
  131. #define MSG_SD_INIT_FAIL "SD init fail"
  132. #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
  133. #define MSG_SD_OPENROOT_FAIL "openRoot failed"
  134. #define MSG_SD_CARD_OK "SD card ok"
  135. #define MSG_SD_WORKDIR_FAIL "workDir open failed"
  136. #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
  137. #define MSG_SD_FILE_OPENED "File opened: "
  138. #define MSG_SD_FILE_SELECTED "File selected"
  139. #define MSG_SD_WRITE_TO_FILE "Writing to file: "
  140. #define MSG_SD_PRINTING_BYTE "SD printing byte "
  141. #define MSG_SD_NOT_PRINTING "Not SD printing"
  142. #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
  143. #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
  144. #define MSG_STEPPER_TOO_HIGH "Steprate too high: "
  145. #define MSG_ENDSTOPS_HIT "endstops hit: "
  146. #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
  147. #define MSG_BABYSTEPPING_X "Babystepping X"
  148. #define MSG_BABYSTEPPING_Y "Babystepping Y"
  149. #define MSG_BABYSTEPPING_Z "Adjusting Z"
  150. #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
  151. #define MSG_LANGUAGE_NAME "English"
  152. #define MSG_LANGUAGE_SELECT "Select language"
  153. #define MSG_PRUSA3D "prusa3d.com"
  154. #define MSG_PRUSA3D_FORUM "forum.prusa3d.com"
  155. #define MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
  156. #define MSG_SELFTEST_ERROR "Selftest error !"
  157. #define MSG_SELFTEST_PLEASECHECK "Please check :"
  158. #define MSG_SELFTEST_NOTCONNECTED "Not connected"
  159. #define MSG_SELFTEST_HEATERTHERMISTOR "Heater/Thermistor"
  160. #define MSG_SELFTEST_BEDHEATER "Bed / Heater"
  161. #define MSG_SELFTEST_WIRINGERROR "Wiring error"
  162. #define MSG_SELFTEST_ENDSTOPS "Endstops"
  163. #define MSG_SELFTEST_MOTOR "Motor"
  164. #define MSG_SELFTEST_ENDSTOP "Endstop"
  165. #define(length=20,lines=1) MSG_SELFTEST_ENDSTOP_NOTHIT "Endstop not hit"
  166. #define MSG_SELFTEST_OK "Self test OK"
  167. #define(length=20,lines=1) MSG_LOOSE_PULLEY "Loose pulley"
  168. #define(length=20) MSG_SELFTEST_FAN "Fan test";
  169. #define(length=20) MSG_SELFTEST_COOLING_FAN "Front print fan?";
  170. #define(length=20) MSG_SELFTEST_EXTRUDER_FAN "Left hotend fan?";
  171. #define MSG_SELFTEST_FAN_YES "Spinning";
  172. #define MSG_SELFTEST_FAN_NO "Not spinning";
  173. #define(length=20) MSG_STATS_TOTALFILAMENT "Total filament :"
  174. #define(length=20) MSG_STATS_TOTALPRINTTIME "Total print time :"
  175. #define(length=20) MSG_STATS_FILAMENTUSED "Filament used: "
  176. #define(length=20) MSG_STATS_PRINTTIME "Print time: "
  177. #define(length=20) MSG_SELFTEST_START "Self test start "
  178. #define(length=20) MSG_SELFTEST_CHECK_ENDSTOPS "Checking endstops"
  179. #define(length=20) MSG_SELFTEST_CHECK_HOTEND "Checking hotend "
  180. #define(length=20) MSG_SELFTEST_CHECK_X "Checking X axis "
  181. #define(length=20) MSG_SELFTEST_CHECK_Y "Checking Y axis "
  182. #define(length=20) MSG_SELFTEST_CHECK_Z "Checking Z axis "
  183. #define(length=20) MSG_SELFTEST_CHECK_BED "Checking bed "
  184. #define(length=20) MSG_SELFTEST_CHECK_ALLCORRECT "All correct "
  185. #define MSG_SELFTEST "Selftest "
  186. #define(length=20) MSG_SELFTEST_FAILED "Selftest failed "
  187. #define MSG_STATISTICS "Statistics "
  188. #define MSG_USB_PRINTING "USB printing "
  189. #define MSG_HOMEYZ "Calibrate Z"
  190. #define MSG_HOMEYZ_PROGRESS "Calibrating Z"
  191. #define MSG_HOMEYZ_DONE "Calibration done"
  192. #define(length=17,lines=1) MSG_SHOW_END_STOPS "Show end stops"
  193. #define MSG_CALIBRATE_BED "Calibrate XYZ"
  194. #define MSG_CALIBRATE_BED_RESET "Reset XYZ calibr."
  195. #define(length=20,lines=8) MSG_MOVE_CARRIAGE_TO_THE_TOP "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
  196. #define(length=20,lines=8) MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
  197. #define(length=20,lines=8) MSG_CONFIRM_NOZZLE_CLEAN "Please clean the nozzle for calibration. Click when done."
  198. #define(length=20,lines=2) MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Are left and right Z~carriages all up?"
  199. #define(length=60) MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Searching bed calibration point"
  200. #define(length=14) MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " of 4"
  201. #define(length=60) MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Improving bed calibration point"
  202. #define(length=14) MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " of 9"
  203. #define(length=60) MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Measuring reference height of calibration point"
  204. #define(length=14) MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " of 9"
  205. #define(length=20) MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Iteration "
  206. #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "XYZ calibration failed. Bed calibration point was not found."
  207. #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "XYZ calibration failed. Please consult the manual."
  208. #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
  209. #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
  210. #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "XYZ calibration all right. Skew will be corrected automatically."
  211. #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "XYZ calibration failed. Left front calibration point not reachable."
  212. #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "XYZ calibration failed. Right front calibration point not reachable."
  213. #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "XYZ calibration failed. Front calibration points not reachable."
  214. #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "XYZ calibration compromised. Left front calibration point not reachable."
  215. #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "XYZ calibration compromised. Right front calibration point not reachable."
  216. #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "XYZ calibration compromised. Front calibration points not reachable."
  217. #define(length=20,lines=4) MSG_BED_LEVELING_FAILED_POINT_LOW "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
  218. #define(length=20,lines=4) MSG_BED_LEVELING_FAILED_POINT_HIGH "Bed leveling failed. Sensor triggered too high. Waiting for reset."
  219. #define(length=20,lines=4) MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset."
  220. #define(length=20,lines=2) MSG_NEW_FIRMWARE_AVAILABLE "New firmware version available:"
  221. #define(length=20) MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Please upgrade."
  222. #define(length=20,lines=8) MSG_FOLLOW_CALIBRATION_FLOW "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
  223. #define(length=20,lines=12) MSG_BABYSTEP_Z_NOT_SET "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
  224. #define(length=20, lines=4) MSG_FILAMENT_LOADING_T0 "Insert filament into extruder 1. Click when done."
  225. #define(length=20, lines=4) MSG_FILAMENT_LOADING_T1 "Insert filament into extruder 2. Click when done."
  226. #define(length=20, lines=4) MSG_FILAMENT_LOADING_T2 "Insert filament into extruder 3. Click when done."
  227. #define(length=20, lines=4) MSG_FILAMENT_LOADING_T3 "Insert filament into extruder 4. Click when done."
  228. #define(length=20, lines=1) MSG_CHANGE_EXTR "Change extruder"
  229. #define(length=20, lines=4) MSG_FIL_ADJUSTING "Adjusting filaments. Please wait."
  230. #define(length=20,lines=8) MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filaments are now adjusted. Please clean the nozzle for calibration. Click when done."
  231. #define(length=20, lines=4) MSG_STACK_ERROR "Error - static memory has been overwritten"
  232. #define(length=20, lines=1) MSG_CALIBRATE_E "Calibrate E"
  233. //#define(length=20, lines=1) MSG_RESET_CALIBRATE_E "Reset E Cal."
  234. #define(length=20, lines=8) MSG_E_CAL_KNOB "Rotate knob until mark reaches extruder body. Click when done."
  235. //#define(length=20, lines=1) MSG_FARM_CARD_MENU "Farm mode print"
  236. #define(length=20, lines=8) MSG_MARK_FIL "Mark filament 100mm from extruder body. Click when done."
  237. #define(length=20, lines=8) MSG_CLEAN_NOZZLE_E "E calibration finished. Please clean the nozzle. Click when done."
  238. #define(length=20, lines=3) MSG_WAITING_TEMP "Waiting for nozzle and bed cooling"
  239. #define(length=20, lines=2) MSG_FILAMENT_CLEAN "Is color clear?"
  240. #define(lenght=18, lines=1) MSG_UNLOADING_FILAMENT "Unloading filament"
  241. #define(length=20, lines=8) MSG_PAPER "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
  242. #define MSG_BED_CORRECTION_MENU "Bed level correct"
  243. #define(length=14,lines=1) MSG_BED_CORRECTION_LEFT "Left side [um]"
  244. #define(length=14,lines=1) MSG_BED_CORRECTION_RIGHT "Right side[um]"
  245. #define(length=14,lines=1) MSG_BED_CORRECTION_FRONT "Front side[um]"
  246. #define(length=14,lines=1) MSG_BED_CORRECTION_REAR "Rear side [um]"
  247. #define MSG_BED_CORRECTION_RESET "Reset"
  248. #define MSG_MESH_BED_LEVELING "Mesh Bed Leveling"
  249. #define MSG_MENU_CALIBRATION "Calibration"
  250. #define(length=19, lines=1) MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD card [normal]"
  251. #define(length=19, lines=1) MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]"
  252. #define(length=20, lines=1) MSG_PRINTER_DISCONNECTED "Printer disconnected"
  253. #define(length=20, lines=1) MSG_FINISHING_MOVEMENTS "Finishing movements"
  254. #define(length=20, lines=1) MSG_PRINT_PAUSED "Print paused"
  255. #define(length=20, lines=1) MSG_RESUMING_PRINT "Resuming print"
  256. #define(length=17, lines=1) MSG_PID_EXTRUDER "PID calibration"
  257. #define(length=19, lines=1) MSG_SET_TEMPERATURE "Set temperature:"
  258. #define(length=20, lines=1) MSG_PID_FINISHED "PID cal. finished"
  259. #define(length=20, lines=1) MSG_PID_RUNNING "PID cal. "
  260. #define(length=17, lines=1) MSG_CALIBRATE_PINDA "Calibrate"
  261. #define(length=17, lines=1) MSG_CALIBRATION_PINDA_MENU "Temp. calibration"
  262. #define(length=20, lines=4) MSG_PINDA_NOT_CALIBRATED "Temperature calibration has not been run yet"
  263. #define(length=20, lines=1) MSG_PINDA_PREHEAT "PINDA Heating"
  264. #define(length=20, lines=1) MSG_TEMP_CALIBRATION "Temp. cal. "
  265. #define(length=20, lines=4) MSG_TEMP_CALIBRATION_DONE "Temperature calibration is finished. Click to continue."
  266. #define(length=20, lines=1) MSG_TEMP_CALIBRATION_ON "Temp. cal. [ON]"
  267. #define(length=20, lines=1) MSG_TEMP_CALIBRATION_OFF "Temp. cal. [OFF]"
  268. #define(length=20, lines=1) MSG_PREPARE_FILAMENT "Prepare new filament"
  269. #define(length=19, lines=1) MSG_ALL "All"
  270. #define(length=19, lines=1) MSG_USED "Used during print"
  271. #define(length=19, lines=1) MSG_CURRENT "Current"
  272. #define(length=20, lines=1) MSG_CHOOSE_EXTRUDER "Choose extruder:"
  273. #define(length=17, lines=1) MSG_EXTRUDER "Extruder"
  274. #define(length=17, lines=1) MSG_EXTRUDER_1 "Extruder 1"
  275. #define(length=17, lines=1) MSG_EXTRUDER_2 "Extruder 2"
  276. #define(length=17, lines=1) MSG_EXTRUDER_3 "Extruder 3"
  277. #define(length=17, lines=1) MSG_EXTRUDER_4 "Extruder 4"
  278. #define(length=20, lines=2) MSG_RECOVER_PRINT "Blackout occured. Recover print?"