123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214 |
- //! @file
- //! @date Jun 10, 2019
- //! @author Marek Bel
- //! @brief First layer (Z offset) calibration
- #include "first_lay_cal.h"
- #include "Configuration_prusa.h"
- #include "language.h"
- #include "Marlin.h"
- #include "cmdqueue.h"
- #include "mmu.h"
- #include <avr/pgmspace.h>
- //! @brief Wait for preheat
- void lay1cal_wait_preheat()
- {
- static const char cmd_preheat_0[] PROGMEM = "M107";
- static const char cmd_preheat_1[] PROGMEM = "M190";
- static const char cmd_preheat_2[] PROGMEM = "M109";
- static const char cmd_preheat_4[] PROGMEM = "G28";
- static const char cmd_preheat_5[] PROGMEM = "G92 E0.0";
- const char * const preheat_cmd[] =
- {
- cmd_preheat_0,
- cmd_preheat_1,
- cmd_preheat_2,
- _T(MSG_M117_V2_CALIBRATION),
- cmd_preheat_4,
- cmd_preheat_5,
- };
- for (uint8_t i = 0; i < (sizeof(preheat_cmd)/sizeof(preheat_cmd[0])); ++i)
- {
- enquecommand_P(preheat_cmd[i]);
- }
- }
- //! @brief Load filament
- //! @param cmd_buffer character buffer needed to format gcodes
- //! @param filament filament to use (applies for MMU only)
- void lay1cal_load_filament(char *cmd_buffer, uint8_t filament)
- {
- if (mmu_enabled)
- {
- enquecommand_P(PSTR("M83"));
- enquecommand_P(PSTR("G1 Y-3.0 F1000.0"));
- enquecommand_P(PSTR("G1 Z0.4 F1000.0"));
- sprintf_P(cmd_buffer, PSTR("T%d"), filament);
- enquecommand(cmd_buffer);
- }
- }
- //! @brief Print intro line
- void lay1cal_intro_line()
- {
- static const char cmd_intro_mmu_3[] PROGMEM = "G1 X55.0 E32.0 F1073.0";
- static const char cmd_intro_mmu_4[] PROGMEM = "G1 X5.0 E32.0 F1800.0";
- static const char cmd_intro_mmu_5[] PROGMEM = "G1 X55.0 E8.0 F2000.0";
- static const char cmd_intro_mmu_6[] PROGMEM = "G1 Z0.3 F1000.0";
- static const char cmd_intro_mmu_7[] PROGMEM = "G92 E0.0";
- static const char cmd_intro_mmu_8[] PROGMEM = "G1 X240.0 E25.0 F2200.0";
- static const char cmd_intro_mmu_9[] PROGMEM = "G1 Y-2.0 F1000.0";
- static const char cmd_intro_mmu_10[] PROGMEM = "G1 X55.0 E25 F1400.0";
- static const char cmd_intro_mmu_11[] PROGMEM = "G1 Z0.20 F1000.0";
- static const char cmd_intro_mmu_12[] PROGMEM = "G1 X5.0 E4.0 F1000.0";
- static const char * const intro_mmu_cmd[] PROGMEM =
- {
- cmd_intro_mmu_3,
- cmd_intro_mmu_4,
- cmd_intro_mmu_5,
- cmd_intro_mmu_6,
- cmd_intro_mmu_7,
- cmd_intro_mmu_8,
- cmd_intro_mmu_9,
- cmd_intro_mmu_10,
- cmd_intro_mmu_11,
- cmd_intro_mmu_12,
- };
- if (mmu_enabled)
- {
- for (uint8_t i = 0; i < (sizeof(intro_mmu_cmd)/sizeof(intro_mmu_cmd[0])); ++i)
- {
- enquecommand_P(static_cast<char*>(pgm_read_ptr(&intro_mmu_cmd[i])));
- }
- }
- else
- {
- enquecommand_P(PSTR("G1 X60.0 E9.0 F1000.0"));
- enquecommand_P(PSTR("G1 X100.0 E12.5 F1000.0"));
- }
- }
- //! @brief Setup for printing meander
- void lay1cal_before_meander()
- {
- static const char cmd_pre_meander_0[] PROGMEM = "G92 E0.0";
- static const char cmd_pre_meander_1[] PROGMEM = "G21"; //set units to millimeters TODO unsupported command
- static const char cmd_pre_meander_2[] PROGMEM = "G90"; //use absolute coordinates
- static const char cmd_pre_meander_3[] PROGMEM = "M83"; //use relative distances for extrusion TODO: duplicate
- static const char cmd_pre_meander_4[] PROGMEM = "G1 E-1.50000 F2100.00000";
- static const char cmd_pre_meander_5[] PROGMEM = "G1 Z5 F7200.000";
- static const char cmd_pre_meander_6[] PROGMEM = "M204 S1000"; //set acceleration
- static const char cmd_pre_meander_7[] PROGMEM = "G1 F4000";
- static const char * const cmd_pre_meander[] PROGMEM =
- {
- cmd_pre_meander_0,
- cmd_pre_meander_1,
- cmd_pre_meander_2,
- cmd_pre_meander_3,
- cmd_pre_meander_4,
- cmd_pre_meander_5,
- cmd_pre_meander_6,
- cmd_pre_meander_7,
- };
- for (uint8_t i = 0; i < (sizeof(cmd_pre_meander)/sizeof(cmd_pre_meander[0])); ++i)
- {
- enquecommand_P(static_cast<char*>(pgm_read_ptr(&cmd_pre_meander[i])));
- }
- }
- //! @brief Count extrude length
- //!
- //! @param layer_height layer height in mm
- //! @param extrusion_width extrusion width in mm
- //! @param extrusion_length extrusion length in mm
- //! @return filament length in mm which needs to be extruded to form line
- static constexpr float count_e(float layer_height, float extrusion_width, float extrusion_length)
- {
- return (extrusion_length * layer_height * extrusion_width / (M_PI * pow(1.75, 2) / 4));
- }
- static const float width = 0.4; //!< line width
- static const float length = 20 - width; //!< line length
- static const float height = 0.2; //!< layer height TODO This is wrong, as current Z height is 0.15 mm
- static const float extr = count_e(height, width, length); //!< E axis movement needed to print line
- //! @brief Print meander
- //! @param cmd_buffer character buffer needed to format gcodes
- void lay1cal_meander(char *cmd_buffer)
- {
- static const char cmd_meander_0[] PROGMEM = "G1 X50 Y155";
- static const char cmd_meander_1[] PROGMEM = "G1 Z0.150 F7200.000";
- static const char cmd_meander_2[] PROGMEM = "G1 F1080";
- static const char cmd_meander_3[] PROGMEM = "G1 X75 Y155 E2.5";
- static const char cmd_meander_4[] PROGMEM = "G1 X100 Y155 E2";
- static const char cmd_meander_5[] PROGMEM = "G1 X200 Y155 E2.62773";
- static const char cmd_meander_6[] PROGMEM = "G1 X200 Y135 E0.66174";
- static const char cmd_meander_7[] PROGMEM = "G1 X50 Y135 E3.62773";
- static const char cmd_meander_8[] PROGMEM = "G1 X50 Y115 E0.49386";
- static const char cmd_meander_9[] PROGMEM = "G1 X200 Y115 E3.62773";
- static const char cmd_meander_10[] PROGMEM = "G1 X200 Y95 E0.49386";
- static const char cmd_meander_11[] PROGMEM = "G1 X50 Y95 E3.62773";
- static const char cmd_meander_12[] PROGMEM = "G1 X50 Y75 E0.49386";
- static const char cmd_meander_13[] PROGMEM = "G1 X200 Y75 E3.62773";
- static const char cmd_meander_14[] PROGMEM = "G1 X200 Y55 E0.49386";
- static const char cmd_meander_15[] PROGMEM = "G1 X50 Y55 E3.62773";
- static const char * const cmd_meander[] PROGMEM =
- {
- cmd_meander_0,
- cmd_meander_1,
- cmd_meander_2,
- cmd_meander_3,
- cmd_meander_4,
- cmd_meander_5,
- cmd_meander_6,
- cmd_meander_7,
- cmd_meander_8,
- cmd_meander_9,
- cmd_meander_10,
- cmd_meander_11,
- cmd_meander_12,
- cmd_meander_13,
- cmd_meander_14,
- cmd_meander_15,
- };
- for (uint8_t i = 0; i < (sizeof(cmd_meander)/sizeof(cmd_meander[0])); ++i)
- {
- enquecommand_P(static_cast<char*>(pgm_read_ptr(&cmd_meander[i])));
- }
- sprintf_P(cmd_buffer, PSTR("G1 X50 Y35 E%-.3f"), extr);
- enquecommand(cmd_buffer);
- }
- //! @brief Print square
- //!
- //! This function needs to be called 16 times for i from 0 to 15.
- //!
- //! @param cmd_buffer character buffer needed to format gcodes
- //! @param i iteration
- void lay1cal_square(char *cmd_buffer, uint8_t i)
- {
- const float extr_short_segment = count_e(height, width, width);
- static const char fmt1[] PROGMEM = "G1 X%d Y%-.2f E%-.3f";
- static const char fmt2[] PROGMEM = "G1 Y%-.2f E%-.3f";
- sprintf_P(cmd_buffer, fmt1, 70, (35 - i*width * 2), extr);
- enquecommand(cmd_buffer);
- sprintf_P(cmd_buffer, fmt2, (35 - (2 * i + 1)*width), extr_short_segment);
- enquecommand(cmd_buffer);
- sprintf_P(cmd_buffer, fmt1, 50, (35 - (2 * i + 1)*width), extr);
- enquecommand(cmd_buffer);
- sprintf_P(cmd_buffer, fmt2, (35 - (i + 1)*width * 2), extr_short_segment);
- enquecommand(cmd_buffer);
- }
|