PrusaFirmware/Firmware/eeprom.h

/**
 * @file
 * @author 3d-gussner
 */
 /** \ingroup eeprom_table */
 
 //! _This is a EEPROM table of currently implemented in Prusa firmware (dynamically generated from doxygen)._


#ifndef EEPROM_H
#define EEPROM_H

#include <stdint.h>

#define MAX_SHEETS 8
#define MAX_SHEET_NAME_LENGTH 7

typedef struct
{
    char name[MAX_SHEET_NAME_LENGTH]; //!< Can be null terminated, doesn't need to be null terminated
    int16_t z_offset; //!< Z_BABYSTEP_MIN .. Z_BABYSTEP_MAX = Z_BABYSTEP_MIN*2/1000 [mm] .. Z_BABYSTEP_MAX*2/1000 [mm]
    uint8_t bed_temp; //!< 0 .. 254 [°C]
    uint8_t pinda_temp; //!< 0 .. 254 [°C]
} Sheet;

typedef struct
{
    Sheet s[MAX_SHEETS];
    uint8_t active_sheet;
} Sheets;
// sizeof(Sheets). Do not change it unless EEPROM_Sheets_base is last item in EEPROM.
// Otherwise it would move following items.
#define EEPROM_SHEETS_SIZEOF 89

#ifdef __cplusplus
static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEPROM_SHEETS_SIZEOF.");
#endif
/** @defgroup eeprom_table EEPROM Table
 *  
 
  ---------------------------------------------------------------------------------
  EEPROM 8-bit Empty value = 0xFFh 255
  
  EEPROM 16-bit Empty value = 0xFFFFh 65535
  
  _Italic = unused or default_
  
  __Bold = Status__
  
  In Default/FactoryReset column the 
  
   - __L__		Language
   - __S__ 		Statistics
   - __P__ 		Shipping prep
   - __M__ 		Service/Maintenance prep
   - __S/P__	Statistics and Shipping prep
   
  will overwrite existing values to 0 or default.
  A FactoryReset All Data will overwrite the whole EEPROM with ffh and some values will be initialized automatically,
  others need a reset / reboot.
  
  ---------------------------------------------------------------------------------
  How can you use the debug codes?
  - Serial terminal like Putty.
  - Octoprint does support D-codes
  - _Pronterface_ does __not__ support D-codes

  ### !!! D-codes are case sensitive so please don't use upper case A,C or X in the address you want to read !!!
   
  #### Useful tools/links:
  To convert hex to ascii 		https://www.rapidtables.com/convert/number/hex-to-ascii.html
  
  To convert hex to dec 		https://www.rapidtables.com/convert/number/hex-to-decimal.html
  
  Version: 1.0.1
  
  ---------------------------------------------------------------------------------
  
  
| Address begin		| Bit/Type 	| Name 									| Valid values	| Default/FactoryReset	| Description 										| Gcode/Function| Debug code
| :--				| :-- 		| :-- 									| :--:			| :--:					| :--												| :--:			| :--:
| 0x0FFFh 4095		| uchar    	| EEPROM_SILENT 						| 00h 0			| ffh 255				| TMC Stealth mode: __off__ / miniRambo Power mode	| LCD menu		| D3 Ax0fff C1
| ^ 				| ^ 		| ^										| 01h 1			| ^						| TMC Stealth mode: __on__ / miniRambo Silent mode	| ^				| ^ 
| ^ 				| ^ 		| ^										| 02h 2			| ^						| miniRambo Auto mode								| ^				| ^ 
| 0x0FFEh 4094		| uchar    	| EEPROM_LANG 							| 00h 0			| ffh 255		__L__	| English / LANG_ID_PRI								| LCD menu		| D3 Ax0ffe C1 
| ^ 				| ^ 		| ^										| 01h 1			| ^						| Other language LANG_ID_SEC						| ^ 			| ^
| 0x0FFCh 4092		| uint16	| EEPROM_BABYSTEP_X						| ???			| ff ffh 65535			| Babystep for X axis _unsued_						| ??? 			| D3 Ax0ffc C2
| 0x0FFAh 4090		| uint16	| EEPROM_BABYSTEP_Y						| ???			| ff ffh 65535			| Babystep for Y axis _unsued_						| ^ 			| D3 Ax0ffa C2
| 0x0FF8h 4088		| uint16	| EEPROM_BABYSTEP_Z						| ???			| ff ffh 65535			| Babystep for Z axis _lagacy_						| ^ 			| D3 Ax0ff8 C2
| ^ 				| ^ 		| ^										| ^				| ^						| multiple values stored now in EEPROM_Sheets_base	| ^ 			| ^
| 0x0FF7h 4087		| uint8		| EEPROM_CALIBRATION_STATUS				| ffh 255		| ffh 255				| Assembled _default_								| ??? 			| D3 Ax0ff7 C1
| ^ 				| ^ 		| ^										| 01h 1			| ^						| Calibrated										| ^ 			| ^
| ^ 				| ^ 		| ^										| e6h 230		| ^						| needs Live Z adjustment							| ^ 			| ^
| ^ 				| ^ 		| ^										| f0h 240		| ^				__P__	| needs Z calibration								| ^ 			| ^
| ^ 				| ^ 		| ^										| fah 250		| ^						| needs XYZ calibration								| ^ 			| ^ 
| ^ 				| ^ 		| ^										| 00h 0			| ^						| Unknown											| ^ 			| ^
| 0x0FF5h 4085		| uint16	| EEPROM_BABYSTEP_Z0					| ???			| ff ffh 65535			| Babystep for Z ???								| ??? 			| D3 Ax0ff5 C2
| 0x0FF1h 4081		| uint32	| EEPROM_FILAMENTUSED					| ???			| 00 00 00 00h 0 __S/P__| Filament used in meters							| ??? 			| D3 Ax0ff1 C4
| 0x0FEDh 4077		| uint32	| EEPROM_TOTALTIME						| ???			| 00 00 00 00h 0 __S/P__| Total print time									| ??? 			| D3 Ax0fed C4
| 0x0FE5h 4069		| float		| EEPROM_BED_CALIBRATION_CENTER			| ???			| ff ff ff ffh			| ???											 	| ??? 			| D3 Ax0fe5 C8
| 0x0FDDh 4061		| float		| EEPROM_BED_CALIBRATION_VEC_X			| ???			| ff ff ff ffh			| ???											 	| ??? 			| D3 Ax0fdd C8
| 0x0FD5h 4053		| float		| EEPROM_BED_CALIBRATION_VEC_Y			| ???			| ff ff ff ffh			| ???											 	| ??? 			| D3 Ax0fd5 C8
| 0x0FC5h 4037		| int16		| EEPROM_BED_CALIBRATION_Z_JITTER		| ???			| ff ffh 65535			| ???											 	| ??? 			| D3 Ax0fc5 C16
| 0x0FC4h 4036		| bool		| EEPROM_FARM_MODE						| 00h 0			| ffh 255 		__P__	| Prusa farm mode: __off__							| G99 			| D3 Ax0fc4 C1
| ^					| ^			| ^										| 01h 1			| ^						| Prusa farm mode: __on__							| G98			| ^
| 0x0FC3h 4035		| free		| _EEPROM_FREE_NR1_						| ???			| ffh 255				| _Free EEPROM space_								| _free space_	| D3 Ax0fc3 C1
| 0x0FC1h 4033		| ???		| EEPROM_FARM_NUMBER					| 000-999		| ff ffh / 000	__P__	| Prusa farm number	_only 0-9 are allowed: 000-999_	| LCD menu		| D3 Ax0fc1 C2
| 0x0FC0h 4032		| bool		| EEPROM_BED_CORRECTION_VALID			| 00h 0			| 00h 0					| Bed correction invalid							| ??? 			| D3 Ax0fc0 C1
| ^					| ^			| ^										| ffh 255		| 						| Bed correction valid								| ??? 			| ^
| 0x0FBFh 4031		| char		| EEPROM_BED_CORRECTION_LEFT			| 00h ffh		| 00h 0					| Bed manual correction left						| LCD menu 		| D3 Ax0fbf C1
| ^					| ^			| ^										| ^				| ^						| At this moment limited to +-100um					| G80 Lxxx 			| ^
| 0x0FBEh 4030		| char		| EEPROM_BED_CORRECTION_RIGHT			| 00h ffh		| 00h 0					| Bed manual correction right						| LCD menu 		| D3 Ax0fbe C1
| ^					| ^			| ^										| ^				| ^						| At this moment limited to +-100um					| G80 Rxxx 			| ^
| 0x0FBDh 4029		| char		| EEPROM_BED_CORRECTION_FRONT			| 00h ffh		| 00h 0					| Bed manual correction front						| LCD menu 		| D3 Ax0fbd C1
| ^					| ^			| ^										| ^				| ^						| At this moment limited to +-100um					| G80 Fxxx 			| ^
| 0x0FBCh 4028		| char		| EEPROM_BED_CORRECTION_BACK			| 00h ffh		| 00h 0					| Bed manual correction back						| LCD menu 		| D3 Ax0fbc C1
| ^					| ^			| ^										| ^				| ^						| At this moment limited to +-100um					| G80 Bxxx 			| ^
| 0x0FBBh 4027		| bool		| EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY	| 00h 0			| ffh 255				| Toshiba Air: __off__								| LCD menu 		| D3 Ax0fbb C1
| ^					| ^			| ^										| 01h 1			| ^						| Toshiba Air: __on__								| ^ 			| ^	
| 0x0FBAh 4026		| uchar		| EEPROM_PRINT_FLAG						| ???			| ???					| _unsued_											| ??? 			| D3 Ax0fba C1
| 0x0FB0h 4016		| int16		| EEPROM_PROBE_TEMP_SHIFT				| ???			| ???					| ???												| ??? 			| D3 Ax0fb0 C10
| 0x0FAFh 4015		| bool		| EEPROM_TEMP_CAL_ACTIVE				| 00h 0			| 00h 0					| PINDA Temp cal.: __inactive__						| LCD menu		| D3 Ax0faf C1
| ^					| ^			| ^										| ffh 255		| ^						| PINDA Temp cal.: __active__						| ^ 			| ^
| 0x0FA7h 4007		| uint32	| EEPROM_BOWDEN_LENGTH					| ???			| ff 00 00 00h			| Bowden length										| ??? 			| D3 Ax0fae C8
| ^					| ^			| ^										| ^				| 00 00 00 00h			| ^													| ^ 			| ^
| 0x0FA6h 4006		| uint8		| EEPROM_CALIBRATION_STATUS_PINDA		| 00h 0			| ffh 255				| PINDA Temp: __not calibrated__					| ??? 			| D3 Ax0fa6 C1
| ^					| ^			| ^										| 01h 1			| ^						| PINDA Temp: __calibrated__						| ^ 			| ^
| 0x0FA5h 4005		| uint8		| EEPROM_UVLO							| 00h 0			| ffh 255				| Power Panic flag: __inactive__					| ??? 			| D3 Ax0fa5 C1
| ^					| ^			| ^										| 01h 1			| ^						| Power Panic flag: __active__						| ^ 			| ^
| ^					| ^			| ^										| 02h 2			| ^						| Power Panic flag: __???__							| ^ 			| ^
| 0x0F9Dh 3997		| float		| EEPROM_UVLO_CURRENT_POSITION			| ???			| ffh 255				| Power Panic position 								| ??? 			| D3 Ax0f9d C8
| 0x0F95h 3989		| char		| EEPROM_FILENAME						| ???			| ffh 255				| Power Panic Filename 								| ??? 			| D3 Ax0f95 C8
| 0x0F91h 3985		| uint32	| EEPROM_FILE_POSITION					| ???			| ff ff ff ffh			| Power Panic File Position							| ??? 			| D3 Ax0f91 C4
| 0x0F8Dh 3981		| float		| EEPROM_UVLO_CURRENT_POSITION_Z		| ???			| ff ff ff ffh			| Power Panic Z Position	 						| ^ 			| D3 Ax0f8d C4
| 0x0F8Ch 3980		| ???		| EEPROM_UVLO_UNUSED_001				| ??? 			| ffh 255				| Power Panic _unused_								| ^ 			| D3 Ax0f8c C1
| 0x0F8Bh 3979		| uint8		| EEPROM_UVLO_TARGET_BED				| ???			| ffh 255				| Power Panic Bed temperature						| ^ 			| D3 Ax0f8b C1
| 0x0F89h 3977		| uint16	| EEPROM_UVLO_FEEDRATE					| ???			| ff ffh 65535			| Power Panic Feedrate								| ^ 			| D3 Ax0f89 C2
| 0x0F88h 3976		| uint8		| EEPROM_UVLO_FAN_SPEED					| ???			| ffh 255				| Power Panic Fan speed								| ^ 			| D3 Ax0f88 C1
| 0x0F87h 3975		| uint8		| EEPROM_FAN_CHECK_ENABLED				| 00h 0			| ???					| Fan Check __disabled__							| LCD menu		| D3 Ax0f87 C1
| ^					| ^			| ^										| 01h 1			| ffh 255				| Fan Check __enabled__ 							| ^ 			| ^
| 0x0F75h 3957		| uint16	| EEPROM_UVLO_MESH_BED_LEVELING			| ???			| ff ffh 65535			| Power Panic Mesh Bed Leveling						| ???			| D3 Ax0f75 C18 
| 0x0F73h 3955		| uint16	| EEPROM_UVLO_Z_MICROSTEPS				| ???			| ff ffh 65535			| Power Panic Z microsteps							| ???			| D3 Ax0f73 C2 
| 0x0F72h 3954		| uint8		| EEPROM_UVLO_E_ABS						| ???			| ffh 255				| Power Panic ??? position							| ???			| D3 Ax0f72 C1
| 0x0F6Eh 3950		| foat		| EEPROM_UVLO_CURRENT_POSITION_E		| ???			| ff ff ff ffh			| Power Panic E position							| ???			| D3 Ax0f6e C4
| 0x0F6Dh 3949		| ???		| _EEPROM_FREE_NR2_						| ???			| ffh 255				| _Free EEPROM space_								| _free space_	| D3 Ax0f6d C1
| 0x0F6Ch 3948		| ???		| _EEPROM_FREE_NR3_						| ???			| ffh 255				| _Free EEPROM space_								| _free space_	| D3 Ax0f6c C1
| 0x0F6Bh 3947		| ???		| _EEPROM_FREE_NR4_						| ???			| ffh 255				| _Free EEPROM space_								| _free space_	| D3 Ax0f6b C1
| 0x0F6Ah 3946		| ???		| _EEPROM_FREE_NR5_						| ???			| ffh 255				| _Free EEPROM space_								| _free space_	| D3 Ax0f6a C1
| 0x0F69h 3945		| uint8		| EEPROM_CRASH_DET						| ffh 255		| ffh 255				| Crash detection: __enabled__						| LCD menu		| D3 Ax0f69 C1
| ^					| ^			| ^										| 00h 0			| ^						| Crash detection: __disabled__						| LCD menu		| ^
| 0x0F68h 3944		| uint8		| EEPROM_CRASH_COUNT_Y					| 00h-ffh 0-255	| ffh 255		__S/P__	| Crashes detected on y axis						| ???			| D3 Ax0f68 C1
| 0x0F67h 3943		| uint8		| EEPROM_FSENSOR						| 01h 1			| ffh 255		__P__	| Filament sensor: __enabled__						| LCD menu		| D3 Ax0f67 C1
| ^					| ^			| ^										| 00h 0			| ^						| Filament sensor: __disabled__						| LCD menu		| ^
| 0x0F65h 3942		| uint8		| EEPROM_CRASH_COUNT_X					| 00h-ffh 0-255	| ffh 255		__S/P__	| Crashes detected on x axis						| ???			| D3 Ax0f66 C1
| 0x0F65h 3941		| uint8		| EEPROM_FERROR_COUNT					| 00h-ffh 0-255	| ffh 255		__S/P__	| Filament sensor error counter						| ???			| D3 Ax0f65 C1
| 0x0F64h 3940		| uint8		| EEPROM_POWER_COUNT					| 00h-ffh 0-255	| ffh 255		__S/P__	| Power failure counter								| ???			| D3 Ax0f64 C1
| 0x0F60h 3936		| float		| EEPROM_XYZ_CAL_SKEW					| ???			| ff ff ff ffh			| XYZ skew value									| ???			| D3 Ax0f60 C4
| 0x0F5Fh 3935		| uint8		| EEPROM_WIZARD_ACTIVE					| 01h 1			| 01h 1			__P__	| Wizard __active__									| ???			| D3 Ax0f5f C1
| ^					| ^			| ^										| 00h 0			| ^						| Wizard __inactive__								| ^ 			| ^
| ^					| ^			| ^										| 02h 2			| 02h 2			__M__	| Wizard active - Z cal after shipping/service prep | ^ 			| ^
| 0x0F5Dh 3933		| uint16	| EEPROM_BELTSTATUS_X					| ???			| ff ffh				| X Beltstatus 										| ???			| D3 Ax0f5d C2
| 0x0F5Bh 3931		| uint16	| EEPROM_BELTSTATUS_Y					| ???			| ff ffh				| Y Beltstatus 										| ???			| D3 Ax0f5b C2
| 0x0F5Ah 3930		| uint8		| EEPROM_DIR_DEPTH						| 00h-ffh 0-255	| ffh 255				| Directory depth									| ???			| D3 Ax0f5a C1
| 0x0F0Ah 3850		| uint8		| EEPROM_DIRS							| ???			| ffh 255				| Directories ???									| ???			| D3 Ax0f0a C80
| 0x0F09h 3849		| uint8		| EEPROM_SD_SORT						| 00h 0			| ffh 255				| SD card sort by: 	__time__						| LCD menu		| D3 Ax0f09 C1
| ^					| ^			| ^										| 01h 1			| ^						| SD card sort by: 	__alphabet__					| LCD menu		| ^
| ^					| ^			| ^										| 02h 1			| ^						| SD card:			__not sorted__					| LCD menu		| ^
| 0x0F08h 3848		| uint8		| EEPROM_SECOND_SERIAL_ACTIVE			| 00h 0			| ffh 255				| RPi Port: __disabled__							| LCD menu		| D3 Ax0f08 C1
| ^					| ^			| ^										| 01h 1			| ^						| RPi Port: __enabled__								| LCD menu		| ^
| 0x0F07h 3847		| uint8		| EEPROM_FSENS_AUTOLOAD_ENABLED			| 01h 1			| ffh 255		__P__	| Filament autoload: __enabled__					| LCD menu		| D3 Ax0f07 C1
| ^					| ^			| ^										| 00h 0			| ^						| Filament autoload: __disabled__					| LCD menu		| ^
| 0x0F05h 3845		| uint16	| EEPROM_CRASH_COUNT_X_TOT				| 0000-fffe		| ff ffh		__S/P__	| Total crashes on x axis	  						| ???			| D3 Ax0f05 C2
| 0x0F03h 3843		| uint16	| EEPROM_CRASH_COUNT_Y_TOT				| 0000-fffe		| ff ffh		__S/P__	| Total crashes on y axis  							| ???			| D3 Ax0f03 C2
| 0x0F01h 3841		| uint16	| EEPROM_FERROR_COUNT_TOT				| 0000-fffe		| ff ffh		__S/P__	| Total filament sensor errors 						| ???			| D3 Ax0f01 C2
| 0x0EFFh 3839		| uint16	| EEPROM_POWER_COUNT_TOT				| 0000-fffe		| ff ffh		__S/P__	| Total power failures		  						| ???			| D3 Ax0eff C2
| 0x0EFEh 3838		| uint8		| EEPROM_TMC2130_HOME_X_ORIGIN			| ???			| ffh 255				| ???						  						| ???			| D3 Ax0efe C1
| 0x0EFDh 3837		| uint8		| EEPROM	MC2130_HOME_X_BSTEPS		| ???			| ffh 255		    	| ???						  						| ???			| D3 Ax0efd C1
| 0x0EFCh 3836		| uint8		| EEPROM_TMC2130_HOME_X_FSTEPS			| ???			| ffh 255				| ???						  						| ???			| D3 Ax0efc C1
| 0x0EFBh 3835		| uint8		| EEPROM_TMC2130_HOME_Y_ORIGIN			| ???			| ffh 255				| ???						  						| ???			| D3 Ax0efb C1
| 0x0EFAh 3834		| uint8		| EEPROM_TMC2130_HOME_Y_BSTEPS			| ???			| ffh 255				| ???						  						| ???			| D3 Ax0efa C1
| 0x0EF9h 3833		| uint8		| EEPROM_TMC2130_HOME_Y_FSTEPS			| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef9 C1
| 0x0EF8h 3832		| uint8		| EEPROM_TMC2130_HOME_ENABLED			| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef8 C1
| 0x0EF7h 3831		| uint8		| EEPROM_TMC2130_WAVE_X_FAC				| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef7 C1
| 0x0EF6h 3830		| uint8		| EEPROM_TMC2130_WAVE_Y_FAC				| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef6 C1
| 0x0EF5h 3829		| uint8		| EEPROM_TMC2130_WAVE_Z_FAC				| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef5 C1
| 0x0EF4h 3828		| uint8		| EEPROM_TMC2130_WAVE_E_FAC				| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef4 C1
| 0x0EF3h 3827		| uint8		| EEPROM_TMC2130_X_MRES					| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef3 C1
| 0x0EF2h 3826		| uint8		| EEPROM_TMC2130_Y_MRES					| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef2 C1
| 0x0EF1h 3825		| uint8		| EEPROM_TMC2130_Z_MRES					| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef1 C1
| 0x0EF0h 3824		| uint8		| EEPROM_TMC2130_E_MRES					| ???			| ffh 255				| ???						  						| ???			| D3 Ax0ef0 C1
| 0x0EEE 3822		| uint16 	| EEPROM_PRINTER_TYPE					| ???			| ff ffh 65535			| Printer Type										| ???			| D3 Ax0eee C2
| ^					| ^			| ^										| 64 00h 100	| ^						| PRINTER_MK1										| ???			| ^
| ^					| ^			| ^										| c8 00h 200	| ^						| PRINTER_MK2										| ???			| ^
| ^					| ^			| ^										| c9 00h 201	| ^						| PRINTER_MK2 with MMU1								| ???			| ^
| ^					| ^			| ^										| ca 00h 202	| ^						| PRINTER_MK2S										| ???			| ^
| ^					| ^			| ^										| cb 00h 203	| ^						| PRINTER_MK2S with MMU1							| ???			| ^
| ^					| ^			| ^										| fa 00h 250	| ^						| PRINTER_MK2.5										| ???			| ^
| ^					| ^			| ^										| 1a 4fh 20250	| ^						| PRINTER_MK2.5 with MMU2							| ???			| ^
| ^					| ^			| ^										| fc 00h 252	| ^						| PRINTER_MK2.5S									| ???			| ^
| ^					| ^			| ^										| 1c 4fh 20252	| ^						| PRINTER_MK2.5S with MMU2S							| ???			| ^
| ^					| ^			| ^										| 2c 01h 300	| ^						| PRINTER_MK3										| ???			| ^
| ^					| ^			| ^										| 4c 4fh 20300	| ^						| PRINTER_MK3 with MMU2								| ???			| ^
| ^					| ^			| ^										| 2e 01h 302	| ^						| PRINTER_MK3S										| ???			| ^
| ^					| ^			| ^										| 4e 4fh 20302	| ^						| PRINTER_MK3S with MMU2S							| ???			| ^
| 0x0EEC 3820		| uint16	| EEPROM_BOARD_TYPE						| ???			| ff ffh 65535			| Board Type										| ???			| D3 Ax0eec C2
| ^					| ^			| ^										| c8 00h 200	| ^						| BOARD_RAMBO_MINI_1_0								| ???			| ^
| ^					| ^			| ^										| cb 00h 203	| ^						| BOARD_RAMBO_MINI_1_3								| ???			| ^
| ^					| ^			| ^										| 36 01h 310	| ^						| BOARD_EINSY_1_0a									| ???			| ^
| 0x0EE8 3816		| float		| EEPROM_EXTRUDER_MULTIPLIER_0			| ???			| ff ff ff ffh			| Power panic Extruder 0 multiplier					| ???			| D3 Ax0ee8 C4
| 0x0EE4 3812		| float		| EEPROM_EXTRUDER_MULTIPLIER_1			| ???			| ff ff ff ffh			| Power panic Extruder 1 multiplier					| ???			| D3 Ax0ee4 C4
| 0x0EE0 3808		| float		| EEPROM_EXTRUDER_MULTIPLIER_2			| ???			| ff ff ff ffh			| Power panic Extruder 2 multiplier					| ???			| D3 Ax0ee0 C4
| 0x0EDE 3806		| uint16	| EEPROM_EXTRUDEMULTIPLY				| ???			| ff ffh 65535			| Power panic Extruder multiplier					| ???			| D3 Ax0ede C2
| 0x0EDA 3802		| float		| EEPROM_UVLO_TINY_CURRENT_POSITION_Z	| ???			| ff ff ff ffh			| Power panic Z position							| ???			| D3 Ax0eda C4
| 0x0ED8 3800		| uint16	| EEPROM_UVLO_TARGET_HOTEND				| ???			| ff ffh 65535			| Power panic target Hotend temperature				| ???			| D3 Ax0ed8 C2
| 0x0ED7 3799		| uint8		| EEPROM_SOUND_MODE						| 00h 0			| ffh 255				| Sound mode: __loud__								| ???			| D3 Ax0ed7 C1
| ^					| ^			| ^										| 01h 1			| ^						| Sound mode: __once__								| ^				| ^
| ^					| ^			| ^										| 02h 1			| ^						| Sound mode: __silent__							| ^				| ^
| ^					| ^			| ^										| 03h 1			| ^						| Sound mode: __assist__							| ^				| ^
| 0x0ED6 3798		| bool		| EEPROM_AUTO_DEPLETE					| 01h 1			| ffh 255				| MMU2/s autodeplete: __on__						| ???			| D3 Ax0ed6 C1
| ^					| ^			| ^										| 00h 0			| ^						| MMU2/s autodeplete: __off__						| ^				| ^
| 0x0ED5 3797		| bool		| EEPROM_FSENS_OQ_MEASS_ENABLED			| ???			| ffh 255				| PAT1925 ???										| ???			| D3 Ax0ed5 C1
| ^					| ^			| ^										| ???			| ^						| PAT1925 ???										| ^				| ^
| 0x0ED3 3795		| uint16	| EEPROM_MMU_FAIL_TOT					| ???			| ff ffh 65535	__S/P__	| MMU2/s total failures								| ???			| D3 Ax0ed3 C2
| 0x0ED2 3794		| uint8		| EEPROM_MMU_FAIL						| ???			| ffh 255		__S/P__	| MMU2/s fails during print							| ???			| D3 Ax0ed2 C1
| 0x0ED0 3792		| uint16	| EEPROM_MMU_LOAD_FAIL_TOT				| ???			| ff ffh 65535	__S/P__	| MMU2/s total load failures						| ???			| D3 Ax0ed0 C2
| 0x0ECF 3791		| uint8		| EEPROM_MMU_LOAD_FAIL					| ???			| ffh 255		__S/P__	| MMU2/s load failures during print					| ???			| D3 Ax0ecf C1
| 0x0ECE 3790		| uint8		| EEPROM_MMU_CUTTER_ENABLED				| 00h 0			| ffh 255				| MMU2/s cutter: __disabled__						| LCD menu		| D3 Ax0ece C1
| ^					| ^			| ^										| 01h 1			| ^						| MMU2/s cutter: __enabled__						| ^				| ^
| ^					| ^			| ^										| 02h 2			| ^						| MMU2/s cutter: __always__							| ^				| ^
| 0x0DAE 3502		| uint16	| EEPROM_UVLO_MESH_BED_LEVELING_FULL	| ???			| ff ffh 65535			| Power panic Mesh bed leveling points 				| ???			| D3 Ax0dae C288
| 0x0DAD 3501		| uint8		| EEPROM_MBL_TYPE						| ???			| ffh 255				| Mesh bed leveling precision 		_unused atm_	| ???			| D3 Ax0dad C1
| 0x0DAC 3500		| bool		| EEPROM_MBL_MAGNET_ELIMINATION			| 01h 1			| ffh 255				| Mesh bed leveling does: __ignores__ magnets		| LCD menu		| D3 Ax0dac C1
| ^					| ^			| ^										| 00h 0			| ^						| Mesh bed leveling does: __NOT ignores__ magnets	| ^				| ^
| 0x0DAB 3499		| uint8		| EEPROM_MBL_POINTS_NR					| 03h 3			| ffh 255				| Mesh bed leveling points: __3x3__					| LCD menu		| D3 Ax0dab C1
| ^					| ^			| ^										| 07h 7			| ^						| Mesh bed leveling points: __7x7__					| ^				| ^
| 0x0DAA 3498		| uint8		| EEPROM_MBL_PROBE_NR					| 03h 3			| ffh 255				| MBL times measurements for each point: __3__ 		| LCD menu		| D3 Ax0daa C1
| ^					| ^			| ^										| 05h 5			| ^						| MBL times measurements for each point: __5__		| ^				| ^
| ^					| ^			| ^										| 01h 1			| ^						| MBL times measurements for each point: __1__		| ^				| ^
| 0x0DA9 3497		| uint8		| EEPROM_MMU_STEALTH					| 01h 1			| ffh 255				| MMU2/s Silent mode: __on__						| ???			| D3 Ax0da9 C1
| ^					| ^			| ^										| 00h 0			| ^						| MMU2/s Silent mode: __off__						| ^				| ^
| 0x0DA8 3496		| uint8		| EEPROM_CHECK_MODE						| 01h 1			| ffh 255				| Check mode for nozzle is: __warn__				| LCD menu		| D3 Ax0da8 C1
| ^					| ^			| ^										| 02h 0			| ^						| Check mode for nozzle is: __strict__				| ^				| ^
| ^					| ^			| ^										| 00h 0			| ^						| Check mode for nozzle is: __none__				| ^				| ^
| 0x0DA7 3495		| uint8		| EEPROM_NOZZLE_DIAMETER				| 28h 40		| ffh 255				| Nozzle diameter is: __40 or 0.40mm__				| LCD menu		| D3 Ax0da7 C1
| ^					| ^			| ^										| 3ch 60		| ^						| Nozzle diameter is: __60 or 0.60mm__				| ^				| ^
| ^					| ^			| ^										| 3ch 80		| ^						| Nozzle diameter is: __80 or 0.80mm__				| ^				| ^
| ^					| ^			| ^										| 19h 25		| ^						| Nozzle diameter is: __25 or 0.25mm__				| ^				| ^
| 0x0DA5 3493		| uint16	| EEPROM_NOZZLE_DIAMETER_uM				| 9001h			| ff ffh 65535			| Nozzle diameter is: __400um__						| LCD menu		| D3 Ax0da5 C2
| ^					| ^			| ^										| 5802h			| ^						| Nozzle diameter is: __600um__						| ^				| ^
| ^					| ^			| ^										| 2003h			| ^						| Nozzle diameter is: __800um__						| ^				| ^
| ^					| ^			| ^										| fa00h			| ^						| Nozzle diameter is: __250um__						| ^				| ^
| 0x0DA4 3492		| uint8		| EEPROM_CHECK_MODEL					| 01h 1			| ffh 255				| Check mode for printer model is: __warn__			| LCD menu		| D3 Ax0da4 C1
| ^					| ^			| ^										| 02h 0			| ^						| Check mode for printer model is: __strict__		| ^				| ^
| ^					| ^			| ^										| 00h 0			| ^						| Check mode for printer model is: __none__			| ^				| ^
| 0x0DA3 3491		| uint8		| EEPROM_CHECK_VERSION					| 01h 1			| ffh 255				| Check mode for firmware is: __warn__				| LCD menu		| D3 Ax0da3 C1
| ^					| ^			| ^										| 02h 0			| ^						| Check mode for firmware is: __strict__			| ^				| ^
| ^					| ^			| ^										| 00h 0			| ^						| Check mode for firmware is: __none__				| ^				| ^
| 0x0DA2 3490		| uint8		| EEPROM_CHECK_GCODE					| 01h 1			| ffh 255				| Check mode for gcode is: __warn__ _unused atm_	| LCD menu		| D3 Ax0da2 C1
| ^					| ^			| ^										| 02h 0			| ^						| Check mode for gcode is: __strict__ _unused atm_	| ^				| ^
| ^					| ^			| ^										| 00h 0			| ^						| Check mode for gcode is: __none__ _unused atm_	| ^				| ^
| 0x0D49 3401		| uint16	| EEPROM_SHEETS_BASE					| ???			| ffh 255				| ???												| LCD menu		| D3 Ax0d49 C89
| 0x0D49 3401		| char		| _1st Sheet block_						| 536d6f6f746831| ffffffffffffff		| 1st sheet - Name: 	_Smooth1_					| ^				| D3 Ax0d49 C7
| 0x0D50 3408		| uint16	| ^										| 00 00h 0		| ff ffh 65535			| 1st sheet - Z offset 								| ^				| D3 Ax0d50 C2	
| 0x0D52 3410		| uint8		| ^										| 00h 0			| ffh 255				| 1st sheet - bed temp 								| ^				| D3 Ax0d52 C1	
| 0x0D53 3411		| uint8		| ^										| 00h 0			| ffh 255				| 1st sheet - PINDA temp 							| ^				| D3 Ax0d53 C1	
| 0x0D54 3412		| char		| _2nd Sheet block_						| 536d6f6f746832| ffffffffffffff		| 2nd sheet - Name: 	_Smooth2_					| ^				| D3 Ax0d54 C7
| 0x0D5B 3419		| uint16	| ^										| 00 00h 0		| ff ffh 65535			| 2nd sheet - Z offset 								| ^				| D3 Ax0d5b C2	
| 0x0D5D 3421		| uint8		| ^										| 00h 0			| ffh 255				| 2nd sheet - bed temp 								| ^				| D3 Ax0d5d C1	
| 0x0D5E 3422		| uint8		| ^										| 00h 0			| ffh 255				| 2nd sheet - PINDA temp 							| ^				| D3 Ax0d5e C1	
| 0x0D5F 3423		| char		| _3rd Sheet block_						| 54657874757231| ffffffffffffff		| 3rd sheet - Name: 	_Textur1_					| ^				| D3 Ax0d5f C7
| 0x0D66 3430		| uint16	| ^										| 00 00h 0		| ff ffh 65535			| 3rd sheet - Z offset 								| ^				| D3 Ax0d66 C2	
| 0x0D68 3432		| uint8		| ^										| 00h 0			| ffh 255				| 3rd sheet - bed temp 								| ^				| D3 Ax0d68 C1	
| 0x0D69 3433		| uint8		| ^										| 00h 0			| ffh 255				| 3rd sheet - PINDA temp 							| ^				| D3 Ax0d69 C1	
| 0x0D6A 3434		| char		| _4th Sheet block_						| 54657874757232| ffffffffffffff		| 4th sheet - Name: 	_Textur2_					| ^				| D3 Ax0d6a C7
| 0x0D71 3441		| uint16	| ^										| 00 00h 0		| ff ffh 65535			| 4th sheet - Z offset 								| ^				| D3 Ax0d71 C2	
| 0x0D73 3443		| uint8		| ^										| 00h 0			| ffh 255				| 4th sheet - bed temp 								| ^				| D3 Ax0d73 C1	
| 0x0D74 3444		| uint8		| ^										| 00h 0			| ffh 255				| 4th sheet - PINDA temp 							| ^				| D3 Ax0d74 C1	
| 0x0D75 3445		| char		| _5th Sheet block_						| 536174696e2031| ffffffffffffff		| 5th sheet - Name: 	_Satin 1_					| ^				| D3 Ax0d75 C7
| 0x0D7C 3452		| uint16	| ^										| 00 00h 0		| ff ffh 65535			| 5th sheet - Z offset 								| ^				| D3 Ax0d7c C2	
| 0x0D7E 3454		| uint8		| ^										| 00h 0			| ffh 255				| 5th sheet - bed temp 								| ^				| D3 Ax0d7e C1	
| 0x0D7F 3455		| uint8		| ^										| 00h 0			| ffh 255				| 5th sheet - PINDA temp 							| ^				| D3 Ax0d7f C1	
| 0x0D80 3456		| char		| _6th Sheet block_						| 536174696e2032| ffffffffffffff		| 6th sheet - Name: 	_Satin 2_					| ^				| D3 Ax0d80 C7
| 0x0D87 3463		| uint16	| ^										| 00 00h 0		| ff ffh 65535			| 6th sheet - Z offset 								| ^				| D3 Ax0d87 C2	
| 0x0D89 3465		| uint8		| ^										| 00h 0			| ffh 255				| 6th sheet - bed temp 								| ^				| D3 Ax0d89 C1	
| 0x0D8A 3466		| uint8		| ^										| 00h 0			| ffh 255				| 6th sheet - PINDA temp 							| ^				| D3 Ax0d8a C1	
| 0x0D8B 3467		| char		| _7th Sheet block_						| 437573746f6d31| ffffffffffffff		| 7th sheet - Name: 	_Custom1_					| ^				| D3 Ax0d8b C7
| 0x0D92 3474		| uint16	| ^										| 00 00h 0		| ff ffh 65535			| 7th sheet - Z offset 								| ^				| D3 Ax0d92 C2	
| 0x0D94 3476		| uint8		| ^										| 00h 0			| ffh 255				| 7th sheet - bed temp 								| ^				| D3 Ax0d94 C1	
| 0x0D95 3477		| uint8		| ^										| 00h 0			| ffh 255				| 7th sheet - PINDA temp 							| ^				| D3 Ax0d95 C1	
| 0x0D96 3478		| char		| _8th Sheet block_						| 437573746f6d32| ffffffffffffff		| 8th sheet - Name: 	_Custom2_					| ^				| D3 Ax0d96 C7
| 0x0D9D 3485		| uint16	| ^										| 00 00h 0		| ff ffh 65535			| 8th sheet - Z offset 								| ^				| D3 Ax0d9d C2	
| 0x0D9F 3487		| uint8		| ^										| 00h 0			| ffh 255				| 8th sheet - bed temp 								| ^				| D3 Ax0d9f C1	
| 0x0DA0 3488		| uint8		| ^										| 00h 0			| ffh 255				| 8th sheet - PINDA temp 							| ^				| D3 Ax0da0 C1	
| 0x0DA1 3489		| uint8		| ???									| 00h 0			| ffh 255				| ???												| ???			| D3 Ax0da1 C1
| 0x0D48 3400		| uint8		| EEPROM_FSENSOR_PCB					| ffh 255		| ffh 255				| Filament Sensor type IR unknown					| LCD Support	| D3 Ax0d48 C1
| ^					| ^			| ^										| 00h 0			| ^						| Filament Sensor type IR 0.3 or older				| ^				| ^
| ^					| ^			| ^										| 01h 1			| ^						| Filament Sensor type IR 0.4 or newer				| ^				| ^
| 0x0D47 3399		| uint8		| EEPROM_FSENSOR_ACTION_NA				| 00h 0			| ffh 255				| Filament Sensor action: __Continue__				| LCD menu		| D3 Ax0d47 C1
| ^					| ^			| ^										| 01h 1			| ^						| Filament Sensor action: __Pause__					| ^				| ^
| 0x0D37 3383		| float		| EEPROM_UVLO_SAVED_TARGET				| ???			| ff ff ff ffh			| Power panic saved target all-axis					| ???			| D3 Ax0d37 C16
| ^					| ^			| ^										| ???			| ^						| Power panic saved target e-axis					| ^				| D3 Ax0d43 C4
| ^					| ^			| ^										| ???			| ^						| Power panic saved target z-axis					| ^				| D3 Ax0d3f C4
| ^					| ^			| ^										| ???			| ^						| Power panic saved target y-axis					| ^				| D3 Ax0d3b C4
| ^					| ^			| ^										| ???			| ^						| Power panic saved target x-axis					| ^				| D3 Ax0d37 C4
| 0x0D35 3381		| uint16	| EEPROM_UVLO_FEEDMULTIPLY				| ???			| ff ffh 65355			| Power panic saved feed multiplier					| ???			| D3 Ax0d35 C2
| 0x0D34 3380		| uint8		| EEPROM_BACKLIGHT_LEVEL_HIGH			| 00h - ffh 	| 82h 130				| LCD backlight bright:	__128__	Dim value to 255	| LCD menu		| D3 Ax0d34 C1
| 0x0D33 3379		| uint8		| EEPROM_BACKLIGHT_LEVEL_LOW			| 00h - ffh		| 32h 50				| LCD backlight dim:	__50__ 	0 to Bright value	| LCD menu		| D3 Ax0d33 C1
| 0x0D32 3378		| uint8		| EEPROM_BACKLIGHT_MODE					| 02h 2			| ffh 255				| LCD backlight mode: __Auto__						| LCD menu		| D3 Ax0d32 C1
| ^					| ^			| ^										| 01h 1			| ^						| LCD backlight mode: __Bright__					| ^				| ^
| ^					| ^			| ^										| 00h 0			| ^						| LCD backlight mode: __Dim__						| ^				| ^
| 0x0D30 3376		| uint16	| EEPROM_BACKLIGHT_TIMEOUT				| 01 00 - ff ff | 0a 00h 65535			| LCD backlight timeout: __10__ seconds				| LCD menu		| D3 Ax0d30 C2
| 0x0D2C 3372		| float		| EEPROM_UVLO_LA_K						| ???			| ff ff ff ffh			| Power panic saved Linear Advanced K value			| ???			| D3 Ax0d2c C4
| 0x0D2B 3371		| uint8		| EEPROM_ALTFAN_OVERRIDE				| ffh 255		| ffh 255				| ALTFAN override unknown state						| LCD menu		| D3 Ax0d2b C1
| ^					| ^			| ^										| 00h 0			| ^						| ALTFAN override deactivated						| ^				| ^
| ^					| ^			| ^										| 01h 1			| ^						| ALTFAN override activated 						| ^				| ^
| 0x0D2A 3370		| uint8		| EEPROM_EXPERIMENTAL_VISIBILITY		| ffh 255		| ffh 255				| Experimental menu visibility unknown state		| LCD menu		| D3 Ax0d2a C1
| ^					| ^			| ^										| 00h 0			| ^						| Experimental menu visibility hidden				| ^				| ^
| ^					| ^			| ^										| 01h 1			| ^						| Experimental menu visibility visible				| ^				| ^
| 0x0D29 3369		| uint8		| EEPROM_PINDA_TEMP_COMPENSATION   		| ffh 255		| ffh 255				| PINDA temp compensation unknown state	            | LCD menu		| D3 Ax0d29 C1
| ^					| ^			| ^										| 00h 0			| ^						| PINDA has no temp compensation PINDA v1/2    		| ^				| ^
| ^					| ^			| ^										| 01h 1			| ^						| PINDA has temp compensation aka SuperPINDA       	| ^				| ^
| 0x0D15 3349		| char[20]	| EEPROM_PRUSA_SN						| SN[19] == 0	| ffffffffffffffff...	| PRUSA Serial number string						| PRUSA SN		| D3 Ax0d15 C20
| 0x0D11 3345		| float		| EEPROM_UVLO_ACCELL                	| ???			| ff ff ff ffh			| Power panic saved normal acceleration     		| ???			| D3 Ax0d11 C4
| 0x0D0D 3341		| float		| EEPROM_UVLO_RETRACT_ACCELL			| ???			| ff ff ff ffh			| Power panic saved retract acceleration     		| ???			| D3 Ax0d0d C4
| 0x0D09 3337		| float		| EEPROM_UVLO_TRAVEL_ACCELL				| ???			| ff ff ff ffh			| Power panic saved travel acceleration     		| ???			| D3 Ax0d09 C4
| 0x0D05 3333		| uint32_t	| EEPROM_JOB_ID							| ???			| 00 00 00 00h			| Job ID used by host software						| D3 only		| D3 Ax0d05 C4
| 0x0D01 3329		| uint8_t	| EEPROM_ECOOL_ENABLE					| ffh 255		| ^						| Disable extruder motor scaling for non-farm print	| LCD menu		| D3 Ax0d01 FF
| ^					| ^			| ^										| 2ah 42		| ^						| Enable extruder motor scaling for non-farm print	| ^				| D3 Ax0d01 42

| Address begin		| Bit/Type 	| Name 									| Valid values	| Default/FactoryReset	| Description 										| Gcode/Function| Debug code
| :--:				| :--: 		| :--: 									| :--:			| :--:					| :--:												| :--:			| :--:
| 0x0012 18			| uint16	| EEPROM_FIRMWARE_VERSION_END			| ???			| ff ffh 65535			| ???												| ???			| D3 Ax0012 C2
| 0x0010 16			| uint16	| EEPROM_FIRMWARE_VERSION_FLAVOR		| ???			| ff ffh 65535			| ???												| ???			| D3 Ax0010 C2
| 0x000E 14			| uint16	| EEPROM_FIRMWARE_VERSION_REVISION		| ???			| ff ffh 65535			| Firmware version revision number DEV/ALPHA/BETA/RC| ???			| D3 Ax000e C2
| 0x000C 12			| uint16	| EEPROM_FIRMWARE_VERSION_MINOR			| ???			| ff ffh 65535			| Firmware version minor number						| ???			| D3 Ax000c C2
| 0x000A 10			| uint16	| EEPROM_FIRMWARE_VERSION_MAJOR			| ???			| ff ffh 65535			| Firmware version major number 					| ???			| D3 Ax000a C2
| 0x0000 0			| char		| FW_PRUSA3D_MAGIC						| ???			| ffffffffffffffffffff	| __`PRUSA3DFW`__				 					| ???			| D3 Ax0000 C10
*/

#define EEPROM_EMPTY_VALUE 0xFF
#define EEPROM_EMPTY_VALUE16 0xFFFF
#define EEPROM_EMPTY_VALUE32 0xFFFFFFFFl
// The total size of the EEPROM is
// 4096 for the Atmega2560
#define EEPROM_TOP 4096
#define EEPROM_SILENT 4095
#define EEPROM_LANG 4094
#define EEPROM_BABYSTEP_X 4092 //unused
#define EEPROM_BABYSTEP_Y 4090 //unused
#define EEPROM_BABYSTEP_Z 4088 //legacy, multiple values stored now in EEPROM_Sheets_base
#define EEPROM_CALIBRATION_STATUS 4087
#define EEPROM_BABYSTEP_Z0 4085
#define EEPROM_FILAMENTUSED 4081
// uint32_t
#define EEPROM_TOTALTIME 4077

#define EEPROM_BED_CALIBRATION_CENTER     (EEPROM_TOTALTIME-2*4)
#define EEPROM_BED_CALIBRATION_VEC_X      (EEPROM_BED_CALIBRATION_CENTER-2*4)
#define EEPROM_BED_CALIBRATION_VEC_Y      (EEPROM_BED_CALIBRATION_VEC_X-2*4)

// Offsets of the Z heiths of the calibration points from the first point.
// The offsets are saved as 16bit signed int, scaled to tenths of microns.
#define EEPROM_BED_CALIBRATION_Z_JITTER   (EEPROM_BED_CALIBRATION_VEC_Y-2*8)
#define EEPROM_FARM_MODE (EEPROM_BED_CALIBRATION_Z_JITTER-1)
#define EEPROM_FREE_NR1 (EEPROM_FARM_MODE-1)
#define EEPROM_FARM_NUMBER (EEPROM_FREE_NR1-2)

// Correction of the bed leveling, in micrometers.
// Maximum 50 micrometers allowed.
// Bed correction is valid if set to 1. If set to zero or 255, the successive 4 bytes are invalid.
#define EEPROM_BED_CORRECTION_VALID (EEPROM_FARM_NUMBER-1)
#define EEPROM_BED_CORRECTION_LEFT  (EEPROM_BED_CORRECTION_VALID-1)
#define EEPROM_BED_CORRECTION_RIGHT (EEPROM_BED_CORRECTION_LEFT-1)
#define EEPROM_BED_CORRECTION_FRONT (EEPROM_BED_CORRECTION_RIGHT-1)
#define EEPROM_BED_CORRECTION_REAR  (EEPROM_BED_CORRECTION_FRONT-1)
#define EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY (EEPROM_BED_CORRECTION_REAR-1)
#define EEPROM_PRINT_FLAG (EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY-1)
#define EEPROM_PROBE_TEMP_SHIFT (EEPROM_PRINT_FLAG - 2*5) //5 x int for storing pinda probe temp shift relative to 50 C; unit: motor steps 
#define EEPROM_TEMP_CAL_ACTIVE (EEPROM_PROBE_TEMP_SHIFT - 1)
#define EEPROM_BOWDEN_LENGTH (EEPROM_TEMP_CAL_ACTIVE - 2*4) //4 x int for bowden lengths for multimaterial
#define EEPROM_CALIBRATION_STATUS_PINDA (EEPROM_BOWDEN_LENGTH - 1) //0 - not calibrated; 1 - calibrated
#define EEPROM_UVLO						(EEPROM_CALIBRATION_STATUS_PINDA - 1) //1 - uvlo during print
#define EEPROM_UVLO_CURRENT_POSITION	(EEPROM_UVLO-2*4) // 2 x float for current_position in X and Y axes
#define EEPROM_FILENAME (EEPROM_UVLO_CURRENT_POSITION - 8) //8chars to store filename without extension
#define EEPROM_FILE_POSITION (EEPROM_FILENAME - 4) //32 bit for uint32_t file position 
#define EEPROM_UVLO_CURRENT_POSITION_Z	(EEPROM_FILE_POSITION - 4) //float for current position in Z
#define EEPROM_UVLO_UNUSED_001		(EEPROM_UVLO_CURRENT_POSITION_Z - 1) // uint8_t (unused)
#define EEPROM_UVLO_TARGET_BED			(EEPROM_UVLO_UNUSED_001 - 1)
#define EEPROM_UVLO_FEEDRATE			(EEPROM_UVLO_TARGET_BED - 2) //uint16_t
#define EEPROM_UVLO_FAN_SPEED			(EEPROM_UVLO_FEEDRATE - 1) 
#define EEPROM_FAN_CHECK_ENABLED		(EEPROM_UVLO_FAN_SPEED - 1)
#define EEPROM_UVLO_MESH_BED_LEVELING     (EEPROM_FAN_CHECK_ENABLED - 9*2)

#define EEPROM_UVLO_Z_MICROSTEPS     (EEPROM_UVLO_MESH_BED_LEVELING - 2) // uint16_t (could be removed)
#define EEPROM_UVLO_E_ABS            (EEPROM_UVLO_Z_MICROSTEPS - 1)
#define EEPROM_UVLO_CURRENT_POSITION_E	(EEPROM_UVLO_E_ABS - 4)                 //float for current position in E

#define EEPROM_FREE_NR2         (EEPROM_UVLO_CURRENT_POSITION_E - 1)			// FREE EEPROM SPACE
#define EEPROM_FREE_NR3         (EEPROM_FREE_NR2 - 1)							// FREE EEPROM SPACE
#define EEPROM_FREE_NR4         (EEPROM_FREE_NR3 - 1)							// FREE EEPROM SPACE
#define EEPROM_FREE_NR5         (EEPROM_FREE_NR4 - 1)							// FREE EEPROM SPACE
// Crash detection mode EEPROM setting 
#define EEPROM_CRASH_DET         (EEPROM_FREE_NR5 - 1)       				    // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-12) 
// Crash detection counter Y (last print)
#define EEPROM_CRASH_COUNT_Y       (EEPROM_CRASH_DET - 1)                       // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-15)
// Filament sensor on/off EEPROM setting 
#define EEPROM_FSENSOR           (EEPROM_CRASH_COUNT_Y - 1)                     // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-14) 
// Crash detection counter X (last print)
#define EEPROM_CRASH_COUNT_X       (EEPROM_FSENSOR - 1)                         // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-15)
// Filament runout/error coutner (last print)
#define EEPROM_FERROR_COUNT      (EEPROM_CRASH_COUNT_X - 1)                     // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-16)
// Power loss errors (last print)
#define EEPROM_POWER_COUNT       (EEPROM_FERROR_COUNT - 1)                      // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-17)

#define EEPROM_XYZ_CAL_SKEW (EEPROM_POWER_COUNT - 4)                            // float for skew backup
#define EEPROM_WIZARD_ACTIVE (EEPROM_XYZ_CAL_SKEW - 1)                          // 0: wizard not active, 1: wizard active, 2: wizard active without yes/no = forced calibrate Z after shipping/service prep.
#define EEPROM_BELTSTATUS_X (EEPROM_WIZARD_ACTIVE - 2)                          // uint16
#define EEPROM_BELTSTATUS_Y (EEPROM_BELTSTATUS_X - 2)                           // uint16

#define EEPROM_DIR_DEPTH        (EEPROM_BELTSTATUS_Y-1)
#define EEPROM_DIRS  (EEPROM_DIR_DEPTH-80) //8 chars for each dir name, max 10 levels
#define EEPROM_SD_SORT (EEPROM_DIRS - 1) //0 -time, 1-alpha, 2-none
#define EEPROM_SECOND_SERIAL_ACTIVE (EEPROM_SD_SORT - 1)

#define EEPROM_FSENS_AUTOLOAD_ENABLED (EEPROM_SECOND_SERIAL_ACTIVE - 1)

// Crash detection counter X (total)
#define EEPROM_CRASH_COUNT_X_TOT       (EEPROM_FSENS_AUTOLOAD_ENABLED - 2)     // uint16
// Crash detection counter Y (total)
#define EEPROM_CRASH_COUNT_Y_TOT       (EEPROM_CRASH_COUNT_X_TOT - 2)          // uint16
// Filament runout/error coutner (total)
#define EEPROM_FERROR_COUNT_TOT      (EEPROM_CRASH_COUNT_Y_TOT - 2)            // uint16
// Power loss errors (total)
#define EEPROM_POWER_COUNT_TOT       (EEPROM_FERROR_COUNT_TOT - 2)             // uint16

////////////////////////////////////////
// TMC2130 Accurate sensorless homing 

// X-axis home origin (stepper phase in microsteps, 0..63 for 16ustep resolution)
#define EEPROM_TMC2130_HOME_X_ORIGIN           (EEPROM_POWER_COUNT_TOT - 1)                    // uint8
// X-axis home bsteps (number of microsteps backward)
#define EEPROM_TMC2130_HOME_X_BSTEPS           (EEPROM_TMC2130_HOME_X_ORIGIN - 1)              // uint8
// X-axis home fsteps (number of microsteps forward)
#define EEPROM_TMC2130_HOME_X_FSTEPS           (EEPROM_TMC2130_HOME_X_BSTEPS - 1)              // uint8
// Y-axis home origin (stepper phase in microsteps, 0..63 for 16ustep resolution)
#define EEPROM_TMC2130_HOME_Y_ORIGIN           (EEPROM_TMC2130_HOME_X_FSTEPS - 1)              // uint8
// X-axis home bsteps (number of microsteps backward)
#define EEPROM_TMC2130_HOME_Y_BSTEPS           (EEPROM_TMC2130_HOME_Y_ORIGIN - 1)              // uint8
// X-axis home fsteps (number of microsteps forward)
#define EEPROM_TMC2130_HOME_Y_FSTEPS           (EEPROM_TMC2130_HOME_Y_BSTEPS - 1)              // uint8
// Accurate homing enabled
#define EEPROM_TMC2130_HOME_ENABLED            (EEPROM_TMC2130_HOME_Y_FSTEPS - 1)              // uint8


////////////////////////////////////////
// TMC2130 uStep linearity correction

// Linearity correction factor (XYZE)
#define EEPROM_TMC2130_WAVE_X_FAC              (EEPROM_TMC2130_HOME_ENABLED - 1)               // uint8
#define EEPROM_TMC2130_WAVE_Y_FAC              (EEPROM_TMC2130_WAVE_X_FAC - 1)                 // uint8
#define EEPROM_TMC2130_WAVE_Z_FAC              (EEPROM_TMC2130_WAVE_Y_FAC - 1)                 // uint8
#define EEPROM_TMC2130_WAVE_E_FAC              (EEPROM_TMC2130_WAVE_Z_FAC - 1)                 // uint8


////////////////////////////////////////
// TMC2130 uStep resolution

// microstep resolution (XYZE): usteps = (256 >> mres)
#define EEPROM_TMC2130_X_MRES              (EEPROM_TMC2130_WAVE_E_FAC - 1)                     // uint8
#define EEPROM_TMC2130_Y_MRES              (EEPROM_TMC2130_X_MRES - 1)                         // uint8
#define EEPROM_TMC2130_Z_MRES              (EEPROM_TMC2130_Y_MRES - 1)                         // uint8
#define EEPROM_TMC2130_E_MRES              (EEPROM_TMC2130_Z_MRES - 1)                         // uint8

// HW
#define EEPROM_PRINTER_TYPE          (EEPROM_TMC2130_E_MRES - 2)                               // uint16
#define EEPROM_BOARD_TYPE            (EEPROM_PRINTER_TYPE - 2)                                 // uint16

// Extruder multiplier for power panic
#define EEPROM_EXTRUDER_MULTIPLIER_0 (EEPROM_BOARD_TYPE - 4)                                   //float
#define EEPROM_EXTRUDER_MULTIPLIER_1 (EEPROM_EXTRUDER_MULTIPLIER_0 - 4)                        //float
#define EEPROM_EXTRUDER_MULTIPLIER_2 (EEPROM_EXTRUDER_MULTIPLIER_1 - 4)                        //float
#define EEPROM_EXTRUDEMULTIPLY (EEPROM_EXTRUDER_MULTIPLIER_2 - 2)                              // uint16

#define EEPROM_UVLO_TINY_CURRENT_POSITION_Z (EEPROM_EXTRUDEMULTIPLY-4) // float
#define EEPROM_UVLO_TARGET_HOTEND (EEPROM_UVLO_TINY_CURRENT_POSITION_Z-2) // uint16

// Sound Mode
#define EEPROM_SOUND_MODE (EEPROM_UVLO_TARGET_HOTEND-1) // uint8
#define EEPROM_AUTO_DEPLETE (EEPROM_SOUND_MODE-1) //bool

#define EEPROM_FSENS_OQ_MEASS_ENABLED (EEPROM_AUTO_DEPLETE - 1) //bool

#define EEPROM_MMU_FAIL_TOT (EEPROM_FSENS_OQ_MEASS_ENABLED - 2) //uint16_t
#define EEPROM_MMU_FAIL (EEPROM_MMU_FAIL_TOT - 1) //uint8_t

#define EEPROM_MMU_LOAD_FAIL_TOT (EEPROM_MMU_FAIL - 2) //uint16_t
#define EEPROM_MMU_LOAD_FAIL (EEPROM_MMU_LOAD_FAIL_TOT - 1) //uint8_t
#define EEPROM_MMU_CUTTER_ENABLED (EEPROM_MMU_LOAD_FAIL - 1)
#define EEPROM_UVLO_MESH_BED_LEVELING_FULL     (EEPROM_MMU_CUTTER_ENABLED - 12*12*2) //allow 12 calibration points for future expansion

#define EEPROM_MBL_TYPE	(EEPROM_UVLO_MESH_BED_LEVELING_FULL-1) //uint8_t for mesh bed leveling precision
#define EEPROM_MBL_MAGNET_ELIMINATION (EEPROM_MBL_TYPE -1)  
#define EEPROM_MBL_POINTS_NR (EEPROM_MBL_MAGNET_ELIMINATION -1) //uint8_t number of points in one exis for mesh bed leveling
#define EEPROM_MBL_PROBE_NR (EEPROM_MBL_POINTS_NR-1) //number of measurements for each point

#define EEPROM_MMU_STEALTH (EEPROM_MBL_PROBE_NR-1)

#define EEPROM_CHECK_MODE (EEPROM_MMU_STEALTH-1) // uint8
#define EEPROM_NOZZLE_DIAMETER (EEPROM_CHECK_MODE-1) // uint8
#define EEPROM_NOZZLE_DIAMETER_uM (EEPROM_NOZZLE_DIAMETER-2) // uint16
#define EEPROM_CHECK_MODEL (EEPROM_NOZZLE_DIAMETER_uM-1) // uint8
#define EEPROM_CHECK_VERSION (EEPROM_CHECK_MODEL-1) // uint8
#define EEPROM_CHECK_GCODE (EEPROM_CHECK_VERSION-1) // uint8

#define EEPROM_SHEETS_BASE (EEPROM_CHECK_GCODE - EEPROM_SHEETS_SIZEOF) // Sheets
static Sheets * const EEPROM_Sheets_base = (Sheets*)(EEPROM_SHEETS_BASE);

#define EEPROM_FSENSOR_PCB (EEPROM_SHEETS_BASE-1) // uint8
#define EEPROM_FSENSOR_ACTION_NA (EEPROM_FSENSOR_PCB-1) // uint8

#define EEPROM_UVLO_SAVED_TARGET (EEPROM_FSENSOR_ACTION_NA - 4*4) // 4 x float for saved target for all axes
#define EEPROM_UVLO_FEEDMULTIPLY (EEPROM_UVLO_SAVED_TARGET - 2) // uint16_t for feedmultiply

#define EEPROM_BACKLIGHT_LEVEL_HIGH (EEPROM_UVLO_FEEDMULTIPLY-1) // uint8
#define EEPROM_BACKLIGHT_LEVEL_LOW (EEPROM_BACKLIGHT_LEVEL_HIGH-1) // uint8
#define EEPROM_BACKLIGHT_MODE (EEPROM_BACKLIGHT_LEVEL_LOW-1) // uint8
#define EEPROM_BACKLIGHT_TIMEOUT (EEPROM_BACKLIGHT_MODE-2) // uint16

#define EEPROM_UVLO_LA_K (EEPROM_BACKLIGHT_TIMEOUT-4) // float

#define EEPROM_ALTFAN_OVERRIDE (EEPROM_UVLO_LA_K-1) //uint8
#define EEPROM_EXPERIMENTAL_VISIBILITY (EEPROM_ALTFAN_OVERRIDE-1) //uint8
#define EEPROM_PINDA_TEMP_COMPENSATION (EEPROM_EXPERIMENTAL_VISIBILITY-1) //uint8
#define EEPROM_PRUSA_SN (EEPROM_PINDA_TEMP_COMPENSATION-20) //char[20]

#define EEPROM_UVLO_ACCELL (EEPROM_PRUSA_SN-4) // float
#define EEPROM_UVLO_RETRACT_ACCELL (EEPROM_UVLO_ACCELL-4) // float
#define EEPROM_UVLO_TRAVEL_ACCELL (EEPROM_UVLO_RETRACT_ACCELL-4) // float

#define EEPROM_JOB_ID (EEPROM_UVLO_TRAVEL_ACCELL-4) //uint32_t

#define EEPROM_ECOOL_ENABLE (EEPROM_JOB_ID-1) // uint8_t

//This is supposed to point to last item to allow EEPROM overrun check. Please update when adding new items.
#define EEPROM_LAST_ITEM EEPROM_ECOOL_ENABLE
// !!!!!
// !!!!! this is end of EEPROM section ... all updates MUST BE inserted before this mark !!!!!
// !!!!!



// Currently running firmware, each digit stored as uint16_t.
// The flavor differentiates a dev, alpha, beta, release candidate or a release version.
#define EEPROM_FIRMWARE_VERSION_END       (FW_PRUSA3D_MAGIC_LEN+8)
#define EEPROM_FIRMWARE_VERSION_FLAVOR    (FW_PRUSA3D_MAGIC_LEN+6)
#define EEPROM_FIRMWARE_VERSION_REVISION  (FW_PRUSA3D_MAGIC_LEN+4)
#define EEPROM_FIRMWARE_VERSION_MINOR     (FW_PRUSA3D_MAGIC_LEN+2)
#define EEPROM_FIRMWARE_VERSION_MAJOR     FW_PRUSA3D_MAGIC_LEN
// Magic string, indicating that the current or the previous firmware running was the Prusa3D firmware.
#define EEPROM_FIRMWARE_PRUSA_MAGIC 0
#define EEPROM_ECOOL_MAGIC_NUMBER 42

#ifdef __cplusplus
#include "ConfigurationStore.h"
static_assert(EEPROM_FIRMWARE_VERSION_END < 20, "Firmware version EEPROM address conflicts with EEPROM_M500_base");
static constexpr M500_conf * const EEPROM_M500_base = reinterpret_cast<M500_conf*>(20); //offset for storing settings using M500
static_assert(((sizeof(M500_conf) + 20) < EEPROM_LAST_ITEM), "M500_conf address space conflicts with previous items.");
#endif

enum
{
    EEPROM_MMU_CUTTER_ENABLED_enabled = 1,
    EEPROM_MMU_CUTTER_ENABLED_always = 2,
};

#ifdef __cplusplus
void eeprom_init();
bool eeprom_is_sheet_initialized(uint8_t sheet_num);
struct SheetName
{
    char c[sizeof(Sheet::name) + 1];
};
void eeprom_default_sheet_name(uint8_t index, SheetName &sheetName);
int8_t eeprom_next_initialized_sheet(int8_t sheet);
void eeprom_switch_to_next_sheet();
#endif

#endif // EEPROM_H