PrusaFirmware/Firmware/LiquidCrystal_Prusa.h

#ifndef LiquidCrystal_Prusa_h
#define LiquidCrystal_Prusa_h

#include <inttypes.h>
#include <stddef.h>
//#include "Print.h"

// commands
#define LCD_CLEARDISPLAY 0x01
#define LCD_RETURNHOME 0x02
#define LCD_ENTRYMODESET 0x04
#define LCD_DISPLAYCONTROL 0x08
#define LCD_CURSORSHIFT 0x10
#define LCD_FUNCTIONSET 0x20
#define LCD_SETCGRAMADDR 0x40
#define LCD_SETDDRAMADDR 0x80

// flags for display entry mode
#define LCD_ENTRYRIGHT 0x00
#define LCD_ENTRYLEFT 0x02
#define LCD_ENTRYSHIFTINCREMENT 0x01
#define LCD_ENTRYSHIFTDECREMENT 0x00

// flags for display on/off control
#define LCD_DISPLAYON 0x04
#define LCD_DISPLAYOFF 0x00
#define LCD_CURSORON 0x02
#define LCD_CURSOROFF 0x00
#define LCD_BLINKON 0x01
#define LCD_BLINKOFF 0x00

// flags for display/cursor shift
#define LCD_DISPLAYMOVE 0x08
#define LCD_CURSORMOVE 0x00
#define LCD_MOVERIGHT 0x04
#define LCD_MOVELEFT 0x00

// flags for function set
#define LCD_8BITMODE 0x10
#define LCD_4BITMODE 0x00
#define LCD_2LINE 0x08
#define LCD_1LINE 0x00
#define LCD_5x10DOTS 0x04
#define LCD_5x8DOTS 0x00

class LiquidCrystal_Prusa/* : public Print */{
public:
  LiquidCrystal_Prusa(uint8_t rs, uint8_t enable,
		uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
		uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7);
  LiquidCrystal_Prusa(uint8_t rs, uint8_t rw, uint8_t enable,
		uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
		uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7);
  LiquidCrystal_Prusa(uint8_t rs, uint8_t rw, uint8_t enable,
		uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3);
  LiquidCrystal_Prusa(uint8_t rs, uint8_t enable,
		uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3);

  void init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable,
	    uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
	    uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7);
    
  void begin(uint8_t cols, uint8_t rows, uint8_t charsize = LCD_5x8DOTS);

  void begin_noclear(uint8_t cols, uint8_t rows, uint8_t charsize = LCD_5x8DOTS);

  void clear();
  void home();

  void noDisplay();
  void display();
  void noBlink();
  void blink();
  void noCursor();
  void cursor();
  void scrollDisplayLeft();
  void scrollDisplayRight();
  void leftToRight();
  void rightToLeft();
  void autoscroll();
  void noAutoscroll();

  void createChar_P(uint8_t, const uint8_t*);
  void setCursor(uint8_t, uint8_t); 
//  virtual size_t write(uint8_t);
  size_t write(uint8_t);
  void command(uint8_t);

    void print(const char*);
    void print(char, int = 0);
    void print(unsigned char, int = 0);
    void print(int, int = 10);
    void print(unsigned int, int = 10);
    void print(long, int = 10);
    void print(unsigned long, int = 10);
    void print(double, int = 2);

//    void println(const String &s);
    void println(const char[]);
    void println(char, int = 0);
    void println(unsigned char, int = 0);
    void println(int, int = 10);
    void println(unsigned int, int = 10);
    void println(long, int = 10);
    void println(unsigned long, int = 10);
    void println(double, int = 2);
    void println(void);

	void printNumber(unsigned long n, uint8_t base);
	void printFloat(double number, uint8_t digits);

//  using Print::write;
private:
  void send(uint8_t, uint8_t);
  void write4bits(uint8_t);
  void write8bits(uint8_t);
  void pulseEnable();

  uint8_t _rs_pin; // LOW: command.  HIGH: character.
  uint8_t _rw_pin; // LOW: write to LCD.  HIGH: read from LCD.
  uint8_t _enable_pin; // activated by a HIGH pulse.
  uint8_t _data_pins[8];

  uint8_t _displayfunction;
  uint8_t _displaycontrol;
  uint8_t _displaymode;

  uint8_t _initialized;

  uint8_t _numlines,_currline;

  uint8_t _escape[8];
  size_t escape_write(uint8_t value);
  
};

#define ESC_2J     "\x1b[2J"
#define ESC_25h    "\x1b[?25h"
#define ESC_25l    "\x1b[?25l"
#define ESC_H(c,r) "\x1b["#r";"#c"H"

#endif