lang_en.txt 16 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828
  1. #MSG_EXTRUDER_CORRECTION_OFF c=6 r=0
  2. " [off"
  3. #MSG_PLANNER_BUFFER_BYTES c=0 r=0
  4. " PlannerBufferBytes: "
  5. #MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0
  6. " cold extrusion prevented"
  7. #MSG_FREE_MEMORY c=0 r=0
  8. " Free Memory: "
  9. #MSG_CONFIGURATION_VER c=0 r=0
  10. " Last Updated: "
  11. #MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
  12. " of 4"
  13. #MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14 r=0
  14. " of 9"
  15. #MSG_MEASURED_OFFSET c=0 r=0
  16. "[0;0] point offset"
  17. #MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
  18. "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode"
  19. #MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
  20. "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
  21. #MSG_REFRESH c=0 r=0
  22. "\xf8Refresh"
  23. #MSG_BABYSTEPPING_Z c=20 r=0
  24. "Adjusting Z"
  25. #MSG_SELFTEST_CHECK_ALLCORRECT c=20 r=0
  26. "All correct "
  27. #MSG_WIZARD_DONE c=20 r=8
  28. "All is done. Happy printing!"
  29. #MSG_PRESS c=20 r=0
  30. "and press the knob"
  31. #MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
  32. "Are left and right Z~carriages all up?"
  33. #MSG_ADJUSTZ c=0 r=0
  34. "Auto adjust Z?"
  35. #MSG_AUTO_HOME c=0 r=0
  36. "Auto home"
  37. #MSG_AUTOLOAD_FILAMENT c=17 r=0
  38. "AutoLoad filament"
  39. #MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
  40. "Autoloading filament available only when filament sensor is turned on..."
  41. #MSG_AUTOLOADING_ENABLED c=20 r=4
  42. "Autoloading filament is active, just press the knob and insert filament..."
  43. #MSG_SELFTEST_AXIS_LENGTH c=0 r=0
  44. "Axis length"
  45. #MSG_SELFTEST_AXIS c=0 r=0
  46. "Axis"
  47. #MSG_SELFTEST_BEDHEATER c=0 r=0
  48. "Bed / Heater"
  49. #MSG_BED_DONE c=0 r=0
  50. "Bed done"
  51. #MSG_BED_HEATING c=0 r=0
  52. "Bed Heating"
  53. #MSG_BED_CORRECTION_MENU c=0 r=0
  54. "Bed level correct"
  55. #MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=4
  56. "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
  57. #MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED c=20 r=4
  58. "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset."
  59. #MSG_BED_LEVELING_FAILED_POINT_HIGH c=20 r=4
  60. "Bed leveling failed. Sensor triggered too high. Waiting for reset."
  61. #MSG_BED c=0 r=0
  62. "Bed"
  63. #MSG_BEGIN_FILE_LIST c=0 r=0
  64. "Begin file list"
  65. #MSG_MENU_BELT_STATUS c=15 r=1
  66. "Belt status"
  67. #MSG_RECOVER_PRINT c=20 r=2
  68. "Blackout occurred. Recover print?"
  69. #MSG_CALIBRATE_BED c=0 r=0
  70. "Calibrate XYZ"
  71. #MSG_HOMEYZ c=0 r=0
  72. "Calibrate Z"
  73. #MSG_CALIBRATE_PINDA c=17 r=1
  74. "Calibrate"
  75. #MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
  76. "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
  77. #MSG_CALIBRATE_Z_AUTO c=20 r=2
  78. "Calibrating Z"
  79. #MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
  80. "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
  81. #MSG_HOMEYZ_DONE c=0 r=0
  82. "Calibration done"
  83. #MSG_MENU_CALIBRATION c=0 r=0
  84. "Calibration"
  85. #MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
  86. "Cannot enter subdir: "
  87. #MSG_SD_INSERTED c=0 r=0
  88. "Card inserted"
  89. #MSG_SD_REMOVED c=0 r=0
  90. "Card removed"
  91. #MSG_NOT_COLOR c=0 r=0
  92. "Color not correct"
  93. #MSG_COOLDOWN c=0 r=0
  94. "Cooldown"
  95. #MSG_CRASHDETECT_ON c=0 r=0
  96. "Crash det. [on]"
  97. #MSG_CRASHDETECT_NA c=0 r=0
  98. "Crash det. [N/A]"
  99. #MSG_CRASHDETECT_OFF c=0 r=0
  100. "Crash det. [off]"
  101. #MSG_CRASH_DETECTED c=20 r=1
  102. "Crash detected."
  103. #MSG_CURRENT c=19 r=1
  104. "Current"
  105. #MSG_DATE c=17 r=1
  106. "Date:"
  107. #MSG_DISABLE_STEPPERS c=0 r=0
  108. "Disable steppers"
  109. #MSG_BABYSTEP_Z_NOT_SET c=20 r=12
  110. "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
  111. #MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
  112. "Do you want to repeat last step to readjust distance between nozzle and heatbed?"
  113. #MSG_EXTRUDER_CORRECTION c=9 r=0
  114. "E-correct"
  115. #MSG_END_FILE_LIST c=0 r=0
  116. "End file list"
  117. #MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1
  118. "Endstop not hit"
  119. #MSG_SELFTEST_ENDSTOP c=0 r=0
  120. "Endstop"
  121. #MSG_ENDSTOPS_HIT c=0 r=0
  122. "endstops hit: "
  123. #MSG_SELFTEST_ENDSTOPS c=0 r=0
  124. "Endstops"
  125. #MSG_Enqueing c=0 r=0
  126. "enqueing \x22"
  127. #MSG_STACK_ERROR c=20 r=4
  128. "Error - static memory has been overwritten"
  129. #MSG_SD_ERR_WRITE_TO_FILE c=0 r=0
  130. "error writing to file"
  131. #MSG_FSENS_NOT_RESPONDING c=20 r=4
  132. "ERROR: Filament sensor is not responding, please check connection."
  133. #MSG_ERROR c=0 r=0
  134. "ERROR:"
  135. #MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
  136. "Extruder fan:"
  137. #MSG_INFO_EXTRUDER c=15 r=1
  138. "Extruder info"
  139. #MSG_MOVE_E c=0 r=0
  140. "Extruder"
  141. #MSG_FSENS_AUTOLOAD_ON c=17 r=1
  142. "F. autoload [on]"
  143. #MSG_FSENS_AUTOLOAD_NA c=17 r=1
  144. "F. autoload [N/A]"
  145. #MSG_FSENS_AUTOLOAD_OFF c=17 r=1
  146. "F. autoload [off]"
  147. #MSG_FAN_SPEED c=14 r=0
  148. "Fan speed"
  149. #MSG_SELFTEST_FAN c=20 r=0
  150. "Fan test"
  151. #MSG_FANS_CHECK_ON c=17 r=1
  152. "Fans check [on]"
  153. #MSG_FANS_CHECK_OFF c=17 r=1
  154. "Fans check [off]"
  155. #MSG_FSENSOR_ON c=0 r=0
  156. "Fil. sensor [on]"
  157. #MSG_FSENSOR_NA c=0 r=0
  158. "Fil. sensor [N/A]"
  159. #MSG_FSENSOR_OFF c=0 r=0
  160. "Fil. sensor [off]"
  161. #MSG_FILAMENT_CLEAN c=20 r=2
  162. "Filament extruding & with correct color?"
  163. #MSG_NOT_LOADED c=19 r=0
  164. "Filament not loaded"
  165. #MSG_FILAMENT_SENSOR c=20 r=0
  166. "Filament sensor"
  167. #MSG_SELFTEST_FILAMENT_SENSOR c=18 r=0
  168. "Filament sensor:"
  169. #MSG_FILE_INCOMPLETE c=20 r=2
  170. "File incomplete. Continue anyway?"
  171. #MSG_SD_FILE_OPENED c=0 r=0
  172. "File opened: "
  173. #MSG_SD_FILE_SELECTED c=0 r=0
  174. "File selected"
  175. #MSG_FINISHING_MOVEMENTS c=20 r=1
  176. "Finishing movements"
  177. #MSG_V2_CALIBRATION c=17 r=1
  178. "First layer cal."
  179. #MSG_WIZARD_SELFTEST c=20 r=8
  180. "First, I will run the selftest to check most common assembly problems."
  181. #MSG_FLOW c=0 r=0
  182. "Flow"
  183. #MSG_PRUSA3D_FORUM c=0 r=0
  184. "forum.prusa3d.com"
  185. #MSG_SELFTEST_COOLING_FAN c=20 r=0
  186. "Front print fan?"
  187. #MSG_BED_CORRECTION_FRONT c=14 r=1
  188. "Front side[um]"
  189. #MSG_SELFTEST_FANS c=0 r=0
  190. "Front/left fans"
  191. #MSG_SELFTEST_HEATERTHERMISTOR c=0 r=0
  192. "Heater/Thermistor"
  193. #MSG_BED_HEATING_SAFETY_DISABLED c=0 r=0
  194. "Heating disabled by safety timer."
  195. #MSG_HEATING_COMPLETE c=20 r=0
  196. "Heating done."
  197. #MSG_HEATING c=0 r=0
  198. "Heating"
  199. #MSG_WIZARD_WELCOME c=20 r=7
  200. "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
  201. #MSG_PRUSA3D_HOWTO c=0 r=0
  202. "howto.prusa3d.com"
  203. #MSG_FILAMENTCHANGE c=0 r=0
  204. "Change filament"
  205. #MSG_CHANGE_SUCCESS c=0 r=0
  206. "Change success!"
  207. #MSG_CORRECTLY c=20 r=0
  208. "Changed correctly?"
  209. #MSG_CHANGING_FILAMENT c=20 r=0
  210. "Changing filament!"
  211. #MSG_SELFTEST_CHECK_BED c=20 r=0
  212. "Checking bed "
  213. #MSG_SELFTEST_CHECK_ENDSTOPS c=20 r=0
  214. "Checking endstops"
  215. #MSG_SELFTEST_CHECK_HOTEND c=20 r=0
  216. "Checking hotend "
  217. #MSG_SELFTEST_CHECK_FSENSOR c=20 r=0
  218. "Checking sensors "
  219. #MSG_SELFTEST_CHECK_X c=20 r=0
  220. "Checking X axis "
  221. #MSG_SELFTEST_CHECK_Y c=20 r=0
  222. "Checking Y axis "
  223. #MSG_SELFTEST_CHECK_Z c=20 r=0
  224. "Checking Z axis "
  225. #MSG_ERR_CHECKSUM_MISMATCH c=0 r=0
  226. "checksum mismatch, Last Line: "
  227. #MSG_CHOOSE_EXTRUDER c=20 r=1
  228. "Choose extruder:"
  229. #MSG_WIZARD_XYZ_CAL c=20 r=8
  230. "I will run xyz calibration now. It will take approx. 12 mins."
  231. #MSG_WIZARD_Z_CAL c=20 r=8
  232. "I will run z calibration now."
  233. #MSG_WIZARD_V2_CAL_2 c=20 r=12
  234. "I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
  235. #MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
  236. "Improving bed calibration point"
  237. #MSG_WATCH c=0 r=0
  238. "Info screen"
  239. #MSG_FILAMENT_LOADING_T0 c=20 r=4
  240. "Insert filament into extruder 1. Click when done."
  241. #MSG_FILAMENT_LOADING_T1 c=20 r=4
  242. "Insert filament into extruder 2. Click when done."
  243. #MSG_FILAMENT_LOADING_T2 c=20 r=4
  244. "Insert filament into extruder 3. Click when done."
  245. #MSG_FILAMENT_LOADING_T3 c=20 r=4
  246. "Insert filament into extruder 4. Click when done."
  247. #MSG_INSERT_FILAMENT c=20 r=0
  248. "Insert filament"
  249. #MSG_WIZARD_FILAMENT_LOADED c=20 r=2
  250. "Is filament loaded?"
  251. #MSG_WIZARD_PLA_FILAMENT c=20 r=2
  252. "Is it PLA filament?"
  253. #MSG_PLA_FILAMENT_LOADED c=20 r=2
  254. "Is PLA filament loaded?"
  255. #MSG_STEEL_SHEET_CHECK c=20 r=2
  256. "Is steel sheet on heatbed?"
  257. #MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20 r=0
  258. "Iteration "
  259. #MSG_KILLED c=0 r=0
  260. "KILLED. "
  261. #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
  262. "Left hotend fan?"
  263. #MSG_BED_CORRECTION_LEFT c=14 r=1
  264. "Left side [um]"
  265. #MSG_BABYSTEP_Z c=0 r=0
  266. "Live adjust Z"
  267. #MSG_LOAD_FILAMENT c=17 r=0
  268. "Load filament"
  269. #MSG_LOADING_COLOR c=0 r=0
  270. "Loading color"
  271. #MSG_LOADING_FILAMENT c=20 r=0
  272. "Loading filament"
  273. #MSG_LOOSE_PULLEY c=20 r=1
  274. "Loose pulley"
  275. #MSG_M104_INVALID_EXTRUDER c=0 r=0
  276. "M104 Invalid extruder "
  277. #MSG_M105_INVALID_EXTRUDER c=0 r=0
  278. "M105 Invalid extruder "
  279. #MSG_M109_INVALID_EXTRUDER c=0 r=0
  280. "M109 Invalid extruder "
  281. #MSG_M117_V2_CALIBRATION c=25 r=1
  282. "M117 First layer cal."
  283. #MSG_M200_INVALID_EXTRUDER c=0 r=0
  284. "M200 Invalid extruder "
  285. #MSG_M218_INVALID_EXTRUDER c=0 r=0
  286. "M218 Invalid extruder "
  287. #MSG_M221_INVALID_EXTRUDER c=0 r=0
  288. "M221 Invalid extruder "
  289. #MSG_MAIN c=0 r=0
  290. "Main"
  291. #MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60 r=0
  292. "Measuring reference height of calibration point"
  293. #MSG_MESH_BED_LEVELING c=0 r=0
  294. "Mesh Bed Leveling"
  295. #MSG_STEALTH_MODE_OFF c=0 r=0
  296. "Mode [Normal]"
  297. #MSG_SILENT_MODE_ON c=0 r=0
  298. "Mode [silent]"
  299. #MSG_STEALTH_MODE_ON c=0 r=0
  300. "Mode [Stealth]"
  301. #MSG_AUTO_MODE_ON c=0 r=0
  302. "Mode [auto power]"
  303. #MSG_SILENT_MODE_OFF c=0 r=0
  304. "Mode [high power]"
  305. #MSG_SELFTEST_MOTOR c=0 r=0
  306. "Motor"
  307. #MSG_MOVE_AXIS c=0 r=0
  308. "Move axis"
  309. #MSG_MOVE_X c=0 r=0
  310. "Move X"
  311. #MSG_MOVE_Y c=0 r=0
  312. "Move Y"
  313. #MSG_MOVE_Z c=0 r=0
  314. "Move Z"
  315. #MSG_ERR_NO_CHECKSUM c=0 r=0
  316. "No Checksum with line number, Last Line: "
  317. #MSG_NO_MOVE c=0 r=0
  318. "No move."
  319. #MSG_NO_CARD c=0 r=0
  320. "No SD card"
  321. #MSG_NO c=0 r=0
  322. "No"
  323. #MSG_SELFTEST_NOTCONNECTED c=0 r=0
  324. "Not connected"
  325. #MSG_SELFTEST_FAN_NO c=19 r=0
  326. "Not spinning"
  327. #MSG_WIZARD_V2_CAL c=20 r=8
  328. "Now I will calibrate distance between tip of the nozzle and heatbed surface."
  329. #MSG_WIZARD_WILL_PREHEAT c=20 r=4
  330. "Now I will preheat nozzle for PLA."
  331. #MSG_NOZZLE c=0 r=0
  332. "Nozzle"
  333. #MSG_OK c=0 r=0
  334. "ok"
  335. #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
  336. "Old settings found. Default PID, Esteps etc. will be set."
  337. #MSG_SD_OPEN_FILE_FAIL c=0 r=0
  338. "open failed, File: "
  339. #MSG_ENDSTOP_OPEN c=0 r=0
  340. "open"
  341. #MSG_SD_OPENROOT_FAIL c=0 r=0
  342. "openRoot failed"
  343. #MSG_PAUSE_PRINT c=0 r=0
  344. "Pause print"
  345. #MSG_PID_RUNNING c=20 r=1
  346. "PID cal. "
  347. #MSG_PID_FINISHED c=20 r=1
  348. "PID cal. finished"
  349. #MSG_PID_EXTRUDER c=17 r=1
  350. "PID calibration"
  351. #MSG_PINDA_PREHEAT c=20 r=1
  352. "PINDA Heating"
  353. #MSG_PAPER c=20 r=8
  354. "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
  355. #MSG_WIZARD_CLEAN_HEATBED c=20 r=8
  356. "Please clean heatbed and then press the knob."
  357. #MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
  358. "Please clean the nozzle for calibration. Click when done."
  359. #MSG_SELFTEST_PLEASECHECK c=0 r=0
  360. "Please check :"
  361. #MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
  362. "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."
  363. #MSG_WIZARD_LOAD_FILAMENT c=20 r=8
  364. "Please insert PLA filament to the extruder, then press knob to load it."
  365. #MSG_WIZARD_INSERT_CORRECT_FILAMENT c=20 r=8
  366. "Please load PLA filament and then resume Wizard by rebooting the printer."
  367. #MSG_PLEASE_LOAD_PLA c=20 r=4
  368. "Please load PLA filament first."
  369. #MSG_CHECK_IDLER c=20 r=4
  370. "Please open idler and remove filament manually."
  371. #MSG_PLACE_STEEL_SHEET c=20 r=4
  372. "Please place steel sheet on heatbed."
  373. #MSG_PRESS_TO_UNLOAD c=20 r=4
  374. "Please press the knob to unload filament"
  375. #MSG_PULL_OUT_FILAMENT c=20 r=4
  376. "Please pull out filament immediately"
  377. #MSG_REMOVE_STEEL_SHEET c=20 r=4
  378. "Please remove steel sheet from heatbed."
  379. #MSG_PLEASE_WAIT c=20 r=0
  380. "Please wait"
  381. #MSG_POWERUP c=0 r=0
  382. "PowerUp"
  383. #MSG_PREHEAT_NOZZLE c=20 r=0
  384. "Preheat the nozzle!"
  385. #MSG_PREHEAT c=0 r=0
  386. "Preheat"
  387. #MSG_WIZARD_HEATING c=20 r=3
  388. "Preheating nozzle. Please wait."
  389. #MSG_PRESS_TO_PREHEAT c=20 r=4
  390. "Press knob to preheat nozzle and continue."
  391. #MSG_PRINT_ABORTED c=20 r=0
  392. "Print aborted"
  393. #MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
  394. "Print fan:"
  395. #MSG_CARD_MENU c=0 r=0
  396. "Print from SD"
  397. #MSG_PRINT_PAUSED c=20 r=1
  398. "Print paused"
  399. #MSG_ERR_KILLED c=0 r=0
  400. "Printer halted. kill() called!"
  401. #MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
  402. "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
  403. #MSG_ERR_STOPPED c=0 r=0
  404. "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
  405. #WELCOME_MSG c=20 r=0
  406. "Prusa i3 MK3 ready."
  407. #MSG_PRUSA3D c=0 r=0
  408. "prusa3d.com"
  409. #MSG_BED_CORRECTION_REAR c=14 r=1
  410. "Rear side [um]"
  411. #MSG_RECOVERING_PRINT c=20 r=1
  412. "Recovering print "
  413. #MSG_M119_REPORT c=0 r=0
  414. "Reporting endstop status"
  415. #MSG_CALIBRATE_BED_RESET c=0 r=0
  416. "Reset XYZ calibr."
  417. #MSG_BED_CORRECTION_RESET c=0 r=0
  418. "Reset"
  419. #MSG_RESUME_PRINT c=0 r=0
  420. "Resume print"
  421. #MSG_RESUMING_PRINT c=20 r=1
  422. "Resuming print"
  423. #MSG_BED_CORRECTION_RIGHT c=14 r=1
  424. "Right side[um]"
  425. #MSG_SECOND_SERIAL_ON c=17 r=1
  426. "RPi port [on]"
  427. #MSG_SECOND_SERIAL_OFF c=17 r=1
  428. "RPi port [off]"
  429. #MSG_WIZARD_RERUN c=20 r=7
  430. "Running Wizard will delete current calibration results and start from the beginning. Continue?"
  431. #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1
  432. "SD card [normal]"
  433. #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
  434. "SD card [FlshAir]"
  435. #MSG_SD_CARD_OK c=0 r=0
  436. "SD card ok"
  437. #MSG_SD_INIT_FAIL c=0 r=0
  438. "SD init fail"
  439. #MSG_SD_PRINTING_BYTE c=0 r=0
  440. "SD printing byte "
  441. #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
  442. "Searching bed calibration point"
  443. #MSG_LANGUAGE_SELECT c=0 r=0
  444. "Select language"
  445. #MSG_SELFTEST_OK c=0 r=0
  446. "Self test OK"
  447. #MSG_SELFTEST_START c=20 r=0
  448. "Self test start "
  449. #MSG_SELFTEST c=0 r=0
  450. "Selftest "
  451. #MSG_SELFTEST_ERROR c=0 r=0
  452. "Selftest error !"
  453. #MSG_SELFTEST_FAILED c=20 r=0
  454. "Selftest failed "
  455. #MSG_FORCE_SELFTEST c=20 r=8
  456. "Selftest will be run to calibrate accurate sensorless rehoming."
  457. #MSG_SET_TEMPERATURE c=19 r=1
  458. "Set temperature:"
  459. #MSG_SETTINGS c=0 r=0
  460. "Settings"
  461. #MSG_SHOW_END_STOPS c=17 r=1
  462. "Show end stops"
  463. #MSG_DWELL c=0 r=0
  464. "Sleep..."
  465. #MSG_FILE_CNT c=20 r=4
  466. "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
  467. #MSG_SORT_NONE c=17 r=1
  468. "Sort: [None]"
  469. #MSG_SORT_TIME c=17 r=1
  470. "Sort: [Time]"
  471. #MSG_SORT_ALPHA c=17 r=1
  472. "Sort: [Alphabet]"
  473. #MSG_SORTING c=20 r=1
  474. "Sorting files"
  475. #MSG_SPEED c=0 r=0
  476. "Speed"
  477. #MSG_SELFTEST_FAN_YES c=19 r=0
  478. "Spinning"
  479. #MSG_TEMP_CAL_WARNING c=20 r=4
  480. "Stable ambient temperature 21-26C is needed a rigid stand is required."
  481. #MSG_STATISTICS c=0 r=0
  482. "Statistics "
  483. #MSG_STEPPER_TOO_HIGH c=0 r=0
  484. "Steprate too high: "
  485. #MSG_STOP_PRINT c=0 r=0
  486. "Stop print"
  487. #MSG_STOPPED c=0 r=0
  488. "STOPPED. "
  489. #MSG_SUPPORT c=0 r=0
  490. "Support"
  491. #MSG_SELFTEST_SWAPPED c=0 r=0
  492. "Swapped"
  493. #MSG_TEMP_CALIBRATION c=20 r=1
  494. "Temp. cal. "
  495. #MSG_TEMP_CALIBRATION_ON c=20 r=1
  496. "Temp. cal. [on]"
  497. #MSG_TEMP_CALIBRATION_OFF c=20 r=1
  498. "Temp. cal. [off]"
  499. #MSG_CALIBRATION_PINDA_MENU c=17 r=1
  500. "Temp. calibration"
  501. #MSG_TEMP_CAL_FAILED c=20 r=8
  502. "Temperature calibration failed"
  503. #MSG_TEMP_CALIBRATION_DONE c=20 r=12
  504. "Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
  505. #MSG_TEMPERATURE c=0 r=0
  506. "Temperature"
  507. #MSG_MENU_TEMPERATURES c=15 r=1
  508. "Temperatures"
  509. #MSG_ENDSTOP_HIT c=0 r=0
  510. "TRIGGERED"
  511. #MSG_TUNE c=0 r=0
  512. "Tune"
  513. #MSG_UNLOAD_FILAMENT c=17 r=0
  514. "Unload filament"
  515. #MSG_UNLOADING_FILAMENT c=20 r=1
  516. "Unloading filament"
  517. #MSG_USED c=19 r=1
  518. "Used during print"
  519. #MSG_MENU_VOLTAGES c=15 r=1
  520. "Voltages"
  521. #MSG_SD_VOL_INIT_FAIL c=0 r=0
  522. "volume.init failed"
  523. #MSG_USERWAIT c=0 r=0
  524. "Wait for user..."
  525. #MSG_WAITING_TEMP c=20 r=3
  526. "Waiting for nozzle and bed cooling"
  527. #MSG_WAITING_TEMP_PINDA c=20 r=3
  528. "Waiting for PINDA probe cooling"
  529. #MSG_CHANGED_BOTH c=20 r=4
  530. "Warning: both printer type and motherboard type changed."
  531. #MSG_CHANGED_MOTHERBOARD c=20 r=4
  532. "Warning: motherboard type changed."
  533. #MSG_CHANGED_PRINTER c=20 r=4
  534. "Warning: printer type changed."
  535. #MSG_UNLOAD_SUCCESSFUL c=20 r=2
  536. "Was filament unload successful?"
  537. #MSG_SELFTEST_WIRINGERROR c=0 r=0
  538. "Wiring error"
  539. #MSG_WIZARD c=17 r=1
  540. "Wizard"
  541. #MSG_SD_WORKDIR_FAIL c=0 r=0
  542. "workDir open failed"
  543. #MSG_SD_WRITE_TO_FILE c=0 r=0
  544. "Writing to file: "
  545. #MSG_XYZ_DETAILS c=19 r=1
  546. "XYZ cal. details"
  547. #MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
  548. "XYZ calibration failed. Please consult the manual."
  549. #MSG_YES c=0 r=0
  550. "Yes"
  551. #MSG_WIZARD_QUIT c=20 r=8
  552. "You can always resume the Wizard from Calibration -> Wizard."