language_common.h 6.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108
  1. // These are the system messages, which shall always be in English.
  2. +define MSG_Enqueing "enqueing \""
  3. +define MSG_POWERUP "PowerUp"
  4. define MSG_EXTERNAL_RESET " External Reset"
  5. define MSG_BROWNOUT_RESET " Brown out Reset"
  6. define MSG_WATCHDOG_RESET " Watchdog Reset"
  7. define MSG_SOFTWARE_RESET " Software Reset"
  8. define MSG_AUTHOR " | Author: "
  9. +define MSG_CONFIGURATION_VER " Last Updated: "
  10. +define MSG_FREE_MEMORY " Free Memory: "
  11. +define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
  12. +define MSG_OK "ok"
  13. define MSG_FILE_SAVED "Done saving file."
  14. define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
  15. +define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
  16. +define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
  17. define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
  18. define MSG_FILE_PRINTED "Done printing file"
  19. +define MSG_BEGIN_FILE_LIST "Begin file list"
  20. +define MSG_END_FILE_LIST "End file list"
  21. +define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
  22. +define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
  23. +define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
  24. +define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
  25. +define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
  26. +define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
  27. +define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
  28. define MSG_COUNT_X " Count X: "
  29. +define MSG_ERR_KILLED "Printer halted. kill() called!"
  30. +define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
  31. +define MSG_RESEND "Resend: "
  32. define MSG_UNKNOWN_COMMAND "Unknown command: \""
  33. define MSG_ACTIVE_EXTRUDER "Active Extruder: "
  34. define MSG_INVALID_EXTRUDER "Invalid extruder"
  35. define MSG_X_MIN "x_min: "
  36. define MSG_X_MAX "x_max: "
  37. define MSG_Y_MIN "y_min: "
  38. define MSG_Y_MAX "y_max: "
  39. define MSG_Z_MIN "z_min: "
  40. define MSG_Z_MAX "z_max: "
  41. +define MSG_M119_REPORT "Reporting endstop status"
  42. +define MSG_ENDSTOP_HIT "TRIGGERED"
  43. +define MSG_ENDSTOP_OPEN "open"
  44. +define MSG_HOTEND_OFFSET "Hotend offsets:"
  45. +define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
  46. +define MSG_SD_INIT_FAIL "SD init fail"
  47. +define MSG_SD_VOL_INIT_FAIL "volume.init failed"
  48. +define MSG_SD_OPENROOT_FAIL "openRoot failed"
  49. +define MSG_SD_CARD_OK "SD card ok"
  50. +define MSG_SD_WORKDIR_FAIL "workDir open failed"
  51. +define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
  52. +define MSG_SD_FILE_OPENED "File opened: "
  53. define MSG_SD_SIZE " Size: "
  54. +define MSG_SD_FILE_SELECTED "File selected"
  55. +define MSG_SD_WRITE_TO_FILE "Writing to file: "
  56. +define MSG_SD_PRINTING_BYTE "SD printing byte "
  57. +define MSG_SD_NOT_PRINTING "Not SD printing"
  58. +define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
  59. +define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
  60. +define MSG_STEPPER_TOO_HIGH "Steprate too high: "
  61. +define MSG_ENDSTOPS_HIT "endstops hit: "
  62. +define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
  63. define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
  64. +define MSG_BABYSTEPPING_X "Babystepping X"
  65. +define MSG_BABYSTEPPING_Y "Babystepping Y"
  66. +define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
  67. +define MSG_SET_HOME_OFFSETS "Set home offsets"
  68. +define MSG_SET_ORIGIN "Set origin"
  69. define MSG_ON "On "
  70. define MSG_OFF "Off"
  71. +define MSG_VMIN "Vmin"
  72. +define MSG_VTRAV_MIN "VTrav min"
  73. +define MSG_AMAX "Amax "
  74. +define MSG_A_RETRACT "A-retract"
  75. +define MSG_MOVE_01MM "Move 0.1mm"
  76. +define MSG_MOVE_1MM "Move 1mm"
  77. +define MSG_MOVE_10MM "Move 10mm"
  78. +define MSG_NOZZLE1 "Nozzle2"
  79. +define MSG_NOZZLE2 "Nozzle3"
  80. +define MSG_FLOW0 "Flow 0"
  81. +define MSG_FLOW1 "Flow 1"
  82. +define MSG_FLOW2 "Flow 2"
  83. +define MSG_CONTROL "Control"
  84. +define MSG_MIN " \002 Min"
  85. +define MSG_MAX " \002 Max"
  86. +define MSG_FACTOR " \002 Fact"
  87. +define MSG_MOTION "Motion"
  88. +define MSG_VOLUMETRIC "Filament"
  89. +define MSG_VOLUMETRIC_ENABLED "E in mm3"
  90. +define MSG_STORE_EPROM "Store memory"
  91. +define MSG_LOAD_EPROM "Load memory"
  92. +define MSG_RESTORE_FAILSAFE "Restore failsafe"
  93. +define MSG_REFRESH "\xF8" "Refresh"
  94. +define MSG_INIT_SDCARD "Init. SD card"
  95. +define MSG_CNG_SDCARD "Change SD card"
  96. define MSG_ZPROBE_OUT "Z probe out. bed"
  97. define MSG_POSITION_UNKNOWN "Home X/Y before Z"
  98. define MSG_ZPROBE_ZOFFSET "Z Offset"
  99. +define MSG_BABYSTEP_X "Babystep X"
  100. +define MSG_BABYSTEP_Y "Babystep Y"
  101. +define MSG_RECTRACT "Rectract"