lang_en_cz.txt 27 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391
  1. #MSG_PLANNER_BUFFER_BYTES c=0 r=0
  2. " PlannerBufferBytes: "
  3. " PlannerBufferBytes: "
  4. #MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0
  5. " cold extrusion prevented"
  6. "\x00"
  7. #MSG_FREE_MEMORY c=0 r=0
  8. " Free Memory: "
  9. "\x00"
  10. #MSG_CONFIGURATION_VER c=0 r=0
  11. " Last Updated: "
  12. "Naposledy aktualizovano:"
  13. #MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
  14. " of 4"
  15. " z 4"
  16. #MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14 r=0
  17. " of 9"
  18. " z 9"
  19. #MSG_MEASURED_OFFSET c=0 r=0
  20. "[0;0] point offset"
  21. "[0;0] odsazeni bodu"
  22. #MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
  23. "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode"
  24. "\x00"
  25. #MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
  26. "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
  27. "\x00"
  28. #MSG_BABYSTEPPING_Z c=20 r=0
  29. "Adjusting Z"
  30. "Dostavovani Z"
  31. #MSG_SELFTEST_CHECK_ALLCORRECT c=20 r=0
  32. "All correct "
  33. "Vse OK "
  34. #MSG_WIZARD_DONE c=20 r=8
  35. "All is done. Happy printing!"
  36. "Vse je hotovo."
  37. #MSG_PRESS c=20 r=0
  38. "and press the knob"
  39. "a stisknete tlacitko"
  40. #MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
  41. "Are left and right Z~carriages all up?"
  42. "Dojely oba Z voziky k~hornimu dorazu?"
  43. #MSG_AUTO_DEPLETE_ON c=17 r=1
  44. "Auto deplete [on]"
  45. "\x00"
  46. #
  47. "Auto deplete[N/A]"
  48. "\x00"
  49. # MSG_AUTO_DEPLETE_OFF c=17 r=1
  50. "Auto deplete[off]"
  51. "\x00"
  52. #MSG_AUTO_HOME c=0 r=0
  53. "Auto home"
  54. "\x00"
  55. #MSG_AUTOLOAD_FILAMENT c=17 r=0
  56. "AutoLoad filament"
  57. "AutoZavedeni fil."
  58. #MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
  59. "Autoloading filament available only when filament sensor is turned on..."
  60. "Automaticke zavadeni filamentu je dostupne pouze pri zapnutem filament senzoru..."
  61. #MSG_AUTOLOADING_ENABLED c=20 r=4
  62. "Autoloading filament is active, just press the knob and insert filament..."
  63. "Automaticke zavadeni filamentu aktivni, stisknete tlacitko a vlozte filament..."
  64. #MSG_SELFTEST_AXIS_LENGTH c=0 r=0
  65. "Axis length"
  66. "Delka osy"
  67. #MSG_SELFTEST_AXIS c=0 r=0
  68. "Axis"
  69. "Osa"
  70. #MSG_SELFTEST_BEDHEATER c=0 r=0
  71. "Bed / Heater"
  72. "\x00"
  73. #MSG_BED_DONE c=0 r=0
  74. "Bed done"
  75. "Bed OK."
  76. #MSG_BED_HEATING c=0 r=0
  77. "Bed Heating"
  78. "Zahrivani bed"
  79. #MSG_BED_CORRECTION_MENU c=0 r=0
  80. "Bed level correct"
  81. "Korekce podlozky"
  82. #MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=4
  83. "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
  84. "Kalibrace Z selhala. Sensor nesepnul. Znecistena tryska? Cekam na reset."
  85. #MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED c=20 r=4
  86. "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset."
  87. "Kalibrace Z selhala. Sensor je odpojeny nebo preruseny kabel. Cekam na reset."
  88. #MSG_BED_LEVELING_FAILED_POINT_HIGH c=20 r=4
  89. "Bed leveling failed. Sensor triggered too high. Waiting for reset."
  90. "Kalibrace Z selhala. Sensor sepnul prilis vysoko. Cekam na reset."
  91. #MSG_BED c=0 r=0
  92. "Bed"
  93. "\x00"
  94. #MSG_MENU_BELT_STATUS c=15 r=1
  95. "Belt status"
  96. "Stav remenu"
  97. #MSG_RECOVER_PRINT c=20 r=2
  98. "Blackout occurred. Recover print?"
  99. "Detekovan vypadek proudu.Obnovit tisk?"
  100. #MSG_CALIBRATE_BED c=0 r=0
  101. "Calibrate XYZ"
  102. "Kalibrace XYZ"
  103. #MSG_HOMEYZ c=0 r=0
  104. "Calibrate Z"
  105. "Kalibrovat Z"
  106. #MSG_CALIBRATE_PINDA c=17 r=1
  107. "Calibrate"
  108. "Zkalibrovat"
  109. #MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
  110. "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
  111. "Kalibrace XYZ. Otacenim tlacitka posunte Z osu az k~hornimu dorazu. Potvrdte tlacitkem."
  112. #MSG_CALIBRATE_Z_AUTO c=20 r=2
  113. "Calibrating Z"
  114. "Kalibruji Z"
  115. #MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
  116. "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
  117. "Kalibrace Z. Otacenim tlacitka posunte Z osu az k~hornimu dorazu. Potvrdte tlacitkem."
  118. #MSG_HOMEYZ_DONE c=0 r=0
  119. "Calibration done"
  120. "Kalibrace OK"
  121. #MSG_MENU_CALIBRATION c=0 r=0
  122. "Calibration"
  123. "Kalibrace"
  124. #
  125. "Cancel"
  126. "\x00"
  127. #MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
  128. "Cannot enter subdir: "
  129. "\x00"
  130. #MSG_SD_INSERTED c=0 r=0
  131. "Card inserted"
  132. "Karta vlozena"
  133. #MSG_SD_REMOVED c=0 r=0
  134. "Card removed"
  135. "Karta vyjmuta"
  136. #MSG_NOT_COLOR c=0 r=0
  137. "Color not correct"
  138. "Barva neni cista"
  139. #MSG_COOLDOWN c=0 r=0
  140. "Cooldown"
  141. "Zchladit"
  142. #
  143. "Copy selected language from XFLASH?"
  144. "\x00"
  145. #MSG_CRASHDETECT_ON c=0 r=0
  146. "Crash det. [on]"
  147. "Crash det. [zap]"
  148. #MSG_CRASHDETECT_NA c=0 r=0
  149. "Crash det. [N/A]"
  150. "Crash det. [N/A]"
  151. #MSG_CRASHDETECT_OFF c=0 r=0
  152. "Crash det. [off]"
  153. "Crash det. [vyp]"
  154. #MSG_CRASH_DETECTED c=20 r=1
  155. "Crash detected."
  156. "Detekovan naraz."
  157. #
  158. "Crash detected. Resume print?"
  159. "Detekovan naraz. Pokracovat?"
  160. #MSG_CURRENT c=19 r=1
  161. "Current"
  162. "Pouze aktualni"
  163. #MSG_DATE c=17 r=1
  164. "Date:"
  165. "Datum:"
  166. #MSG_DISABLE_STEPPERS c=0 r=0
  167. "Disable steppers"
  168. "Vypnout motory"
  169. #MSG_BABYSTEP_Z_NOT_SET c=20 r=12
  170. "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
  171. "Neni zkalibrovana vzdalenost trysky od tiskove podlozky. Postupujte prosim podle manualu, kapitola Zaciname, odstavec Nastaveni prvni vrstvy."
  172. #MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
  173. "Do you want to repeat last step to readjust distance between nozzle and heatbed?"
  174. "Chcete opakovat posledni krok a pozmenit vzdalenost mezi tryskou a heatbedem?"
  175. #MSG_EXTRUDER_CORRECTION c=9 r=0
  176. "E-correct"
  177. "\x00"
  178. #MSG_EJECT_FILAMENT c=17 r=1
  179. "Eject filament"
  180. "Vysunout filament"
  181. #MSG_EJECT_FILAMENT1 c=17 r=1
  182. "Eject filament 1"
  183. "Vysunout filament 1"
  184. #MSG_EJECT_FILAMENT2 c=17 r=1
  185. "Eject filament 2"
  186. "Vysunout filament 2"
  187. #MSG_EJECT_FILAMENT3 c=17 r=1
  188. "Eject filament 3"
  189. "Vysunout filament 3"
  190. #MSG_EJECT_FILAMENT4 c=17 r=1
  191. "Eject filament 4"
  192. "Vysunout filament 4"
  193. #MSG_EJECT_FILAMENT5 c=17 r=1
  194. "Eject filament 5"
  195. "Vysunout filament 5"
  196. #
  197. "Eject"
  198. "\x00"
  199. #MSG_EJECTING_FILAMENT c=20 r=1
  200. "Ejecting filament"
  201. "Vysouvam filament"
  202. #MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1
  203. "Endstop not hit"
  204. "\x00"
  205. #MSG_SELFTEST_ENDSTOP c=0 r=0
  206. "Endstop"
  207. "\x00"
  208. #MSG_ENDSTOPS_HIT c=0 r=0
  209. "endstops hit: "
  210. "\x00"
  211. #MSG_SELFTEST_ENDSTOPS c=0 r=0
  212. "Endstops"
  213. "\x00"
  214. #MSG_Enqueing c=0 r=0
  215. "enqueing \x22"
  216. "\x00"
  217. #MSG_STACK_ERROR c=20 r=4
  218. "Error - static memory has been overwritten"
  219. "Chyba - Doslo k prepisu staticke pameti!"
  220. #MSG_SD_ERR_WRITE_TO_FILE c=0 r=0
  221. "error writing to file"
  222. "\x00"
  223. #MSG_FSENS_NOT_RESPONDING c=20 r=4
  224. "ERROR: Filament sensor is not responding, please check connection."
  225. "CHYBA: Filament senzor nereaguje, zkontrolujte zapojeni."
  226. #MSG_ERROR c=0 r=0
  227. "ERROR:"
  228. "CHYBA:"
  229. #
  230. "External SPI flash W25X20CL not responding."
  231. "\x00"
  232. #
  233. "Extruder 1"
  234. "\x00"
  235. #
  236. "Extruder 2"
  237. "\x00"
  238. #
  239. "Extruder 3"
  240. "\x00"
  241. #
  242. "Extruder 4"
  243. "\x00"
  244. #MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
  245. "Extruder fan:"
  246. "Levy vent.:"
  247. #MSG_INFO_EXTRUDER c=15 r=1
  248. "Extruder info"
  249. "\x00"
  250. #MSG_MOVE_E c=0 r=0
  251. "Extruder"
  252. "\x00"
  253. #MSG_FSENS_AUTOLOAD_ON c=17 r=1
  254. "F. autoload [on]"
  255. "F. autozav. [zap]"
  256. #MSG_FSENS_AUTOLOAD_NA c=17 r=1
  257. "F. autoload [N/A]"
  258. "F. autozav. [N/A]"
  259. #MSG_FSENS_AUTOLOAD_OFF c=17 r=1
  260. "F. autoload [off]"
  261. "F. autozav. [vyp]"
  262. #MSG_FAN_SPEED c=14 r=0
  263. "Fan speed"
  264. "Rychlost vent."
  265. #MSG_SELFTEST_FAN c=20 r=0
  266. "Fan test"
  267. "Test ventilatoru"
  268. #MSG_FANS_CHECK_ON c=17 r=1
  269. "Fans check [on]"
  270. "Kontr. vent.[zap]"
  271. #MSG_FANS_CHECK_OFF c=17 r=1
  272. "Fans check [off]"
  273. "Kontr. vent.[vyp]"
  274. #MSG_FSENSOR_ON c=0 r=0
  275. "Fil. sensor [on]"
  276. "Fil. senzor [zap]"
  277. #MSG_RESPONSE_POOR c=20 r=2
  278. "Fil. sensor response is poor, disable it?"
  279. "Senzor nerozpoznal filament, vypnout?"
  280. #MSG_FSENSOR_NA c=0 r=0
  281. "Fil. sensor [N/A]"
  282. "Fil. senzor [N/A]"
  283. #MSG_FSENSOR_OFF c=0 r=0
  284. "Fil. sensor [off]"
  285. "Fil. senzor [vyp]"
  286. #MSG_FILAMENT_CLEAN c=20 r=2
  287. "Filament extruding & with correct color?"
  288. "Filament vytlacen a spravne barvy?"
  289. #MSG_NOT_LOADED c=19 r=0
  290. "Filament not loaded"
  291. "Filament nezaveden"
  292. #MSG_FILAMENT_SENSOR c=20 r=0
  293. "Filament sensor"
  294. "Senzor filamentu"
  295. #MSG_SELFTEST_FILAMENT_SENSOR c=18 r=0
  296. "Filament sensor:"
  297. "Senzor filamentu:"
  298. #MSG_FILAMENT_USED c=19 r=1
  299. "Filament used"
  300. "Spotrebovano filamentu"
  301. #MSG_PRINT_TIME c=19 r=1
  302. "Print time"
  303. "Cas tisku"
  304. #MSG_FILE_INCOMPLETE c=20 r=2
  305. "File incomplete. Continue anyway?"
  306. "Soubor nekompletni. Pokracovat?"
  307. #MSG_FINISHING_MOVEMENTS c=20 r=1
  308. "Finishing movements"
  309. "Dokoncovani pohybu"
  310. #MSG_V2_CALIBRATION c=17 r=1
  311. "First layer cal."
  312. "Kal. prvni vrstvy"
  313. #MSG_WIZARD_SELFTEST c=20 r=8
  314. "First, I will run the selftest to check most common assembly problems."
  315. "Nejdriv pomoci selftestu zkontoluji nejcastejsi chyby vznikajici pri sestaveni tiskarny."
  316. #
  317. "Fix the issue and then press button on MMU unit."
  318. "\x00"
  319. #MSG_FLOW c=0 r=0
  320. "Flow"
  321. "Prutok"
  322. #MSG_PRUSA3D_FORUM c=0 r=0
  323. "forum.prusa3d.com"
  324. "\x00"
  325. #MSG_SELFTEST_COOLING_FAN c=20 r=0
  326. "Front print fan?"
  327. "Predni tiskovy vent?"
  328. #MSG_BED_CORRECTION_FRONT c=14 r=1
  329. "Front side[um]"
  330. "Vpredu [um]"
  331. #MSG_SELFTEST_FANS c=0 r=0
  332. "Front/left fans"
  333. "Predni/levy vent."
  334. #MSG_SELFTEST_HEATERTHERMISTOR c=0 r=0
  335. "Heater/Thermistor"
  336. "Heater/Termistor"
  337. #MSG_BED_HEATING_SAFETY_DISABLED c=0 r=0
  338. "Heating disabled by safety timer."
  339. "Zahrivani preruseno bezpecnostnim casovacem."
  340. #MSG_HEATING_COMPLETE c=20 r=0
  341. "Heating done."
  342. "Zahrivani OK."
  343. #MSG_HEATING c=0 r=0
  344. "Heating"
  345. "Zahrivani"
  346. #MSG_WIZARD_WELCOME c=20 r=7
  347. "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
  348. "Dobry den, jsem vase tiskarna Original Prusa i3. Chcete abych Vas provedla kalibracnim procesem?"
  349. #MSG_PRUSA3D_HOWTO c=0 r=0
  350. "howto.prusa3d.com"
  351. "\x00"
  352. #
  353. "Change extruder"
  354. "\x00"
  355. #MSG_FILAMENTCHANGE c=0 r=0
  356. "Change filament"
  357. "Vymenit filament"
  358. #MSG_CHANGE_SUCCESS c=0 r=0
  359. "Change success!"
  360. "Zmena uspesna!"
  361. #MSG_CORRECTLY c=20 r=0
  362. "Changed correctly?"
  363. "Vymena ok?"
  364. #MSG_SELFTEST_CHECK_BED c=20 r=0
  365. "Checking bed "
  366. "Kontrola bed "
  367. #MSG_SELFTEST_CHECK_ENDSTOPS c=20 r=0
  368. "Checking endstops"
  369. "Kontrola endstops"
  370. #MSG_SELFTEST_CHECK_HOTEND c=20 r=0
  371. "Checking hotend "
  372. "Kontrola hotend "
  373. #MSG_SELFTEST_CHECK_FSENSOR c=20 r=0
  374. "Checking sensors "
  375. "Kontrola senzoru"
  376. #MSG_SELFTEST_CHECK_X c=20 r=0
  377. "Checking X axis "
  378. "Kontrola X axis "
  379. #MSG_SELFTEST_CHECK_Y c=20 r=0
  380. "Checking Y axis "
  381. "Kontrola Y axis "
  382. #MSG_SELFTEST_CHECK_Z c=20 r=0
  383. "Checking Z axis "
  384. "Kontrola Z axis "
  385. #MSG_ERR_CHECKSUM_MISMATCH c=0 r=0
  386. "checksum mismatch, Last Line: "
  387. "\x00"
  388. #MSG_CHOOSE_EXTRUDER c=20 r=1
  389. "Choose extruder:"
  390. "Vyberte extruder:"
  391. #MSG_CHOOSE_FILAMENT c=20 r=1
  392. "Choose filament:"
  393. "Vyberte filament:"
  394. #MSG_FILAMENT c=17 r=1
  395. "Filament"
  396. "Filament"
  397. #MSG_WIZARD_XYZ_CAL c=20 r=8
  398. "I will run xyz calibration now. It will take approx. 12 mins."
  399. "Nyni provedu xyz kalibraci. Zabere to priblizne 12 min."
  400. #MSG_WIZARD_Z_CAL c=20 r=8
  401. "I will run z calibration now."
  402. "Nyni provedu z kalibraci."
  403. #MSG_WIZARD_V2_CAL_2 c=20 r=12
  404. "I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
  405. "Zacnu tisknout linku a Vy budete postupne snizovat trysku otacenim tlacitka dokud nedosahnete optimalni vysky. Prohlednete si obrazky v nasi prirucce v kapitole Kalibrace."
  406. #MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
  407. "Improving bed calibration point"
  408. "Zlepsuji presnost kalibracniho bodu"
  409. #MSG_WATCH c=0 r=0
  410. "Info screen"
  411. "Informace"
  412. #MSG_FILAMENT_LOADING_T0 c=20 r=4
  413. "Insert filament into extruder 1. Click when done."
  414. "Vlozte filament do extruderu 1. Potvrdte tlacitkem."
  415. #MSG_FILAMENT_LOADING_T1 c=20 r=4
  416. "Insert filament into extruder 2. Click when done."
  417. "Vlozte filament do extruderu 2. Potvrdte tlacitkem."
  418. #MSG_FILAMENT_LOADING_T2 c=20 r=4
  419. "Insert filament into extruder 3. Click when done."
  420. "Vlozte filament do extruderu 3. Potvrdte tlacitkem."
  421. #MSG_FILAMENT_LOADING_T3 c=20 r=4
  422. "Insert filament into extruder 4. Click when done."
  423. "Vlozte filament do extruderu 4. Potvrdte tlacitkem."
  424. #
  425. "Is filament 1 loaded?"
  426. "\x00"
  427. #MSG_INSERT_FILAMENT c=20 r=0
  428. "Insert filament"
  429. "Vlozte filament"
  430. #MSG_WIZARD_FILAMENT_LOADED c=20 r=2
  431. "Is filament loaded?"
  432. "Je filament zaveden?"
  433. #MSG_WIZARD_PLA_FILAMENT c=20 r=2
  434. "Is it PLA filament?"
  435. "Je to PLA filament?"
  436. #MSG_PLA_FILAMENT_LOADED c=20 r=2
  437. "Is PLA filament loaded?"
  438. "Je PLA filament zaveden?"
  439. #MSG_STEEL_SHEET_CHECK c=20 r=2
  440. "Is steel sheet on heatbed?"
  441. "Je tiskovy plat na heatbed?"
  442. #MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20 r=0
  443. "Iteration "
  444. "Iterace "
  445. #MSG_KILLED c=0 r=0
  446. "KILLED. "
  447. "\x00"
  448. #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
  449. "Left hotend fan?"
  450. "Levy vent na trysce?"
  451. #
  452. "Left"
  453. "\x00"
  454. #MSG_BED_CORRECTION_LEFT c=14 r=1
  455. "Left side [um]"
  456. "Vlevo [um]"
  457. #
  458. "Lin. correction"
  459. "Korekce lin."
  460. #MSG_BABYSTEP_Z c=0 r=0
  461. "Live adjust Z"
  462. "Doladeni osy Z"
  463. #MSG_LOAD_FILAMENT c=17 r=0
  464. "Load filament"
  465. "Zavest filament"
  466. #MSG_LOADING_COLOR c=0 r=0
  467. "Loading color"
  468. "Cisteni barvy"
  469. #MSG_LOADING_FILAMENT c=20 r=0
  470. "Loading filament"
  471. "Zavadeni filamentu"
  472. #MSG_LOOSE_PULLEY c=20 r=1
  473. "Loose pulley"
  474. "Uvolnena remenicka"
  475. #MSG_M104_INVALID_EXTRUDER c=0 r=0
  476. "M104 Invalid extruder "
  477. "\x00"
  478. #MSG_M105_INVALID_EXTRUDER c=0 r=0
  479. "M105 Invalid extruder "
  480. "\x00"
  481. #
  482. "Load to nozzle"
  483. "\x00"
  484. #MSG_M109_INVALID_EXTRUDER c=0 r=0
  485. "M109 Invalid extruder "
  486. "\x00"
  487. #MSG_M117_V2_CALIBRATION c=25 r=1
  488. "M117 First layer cal."
  489. "M117 Kal. prvni vrstvy"
  490. #MSG_M200_INVALID_EXTRUDER c=0 r=0
  491. "M200 Invalid extruder "
  492. "\x00"
  493. #MSG_M218_INVALID_EXTRUDER c=0 r=0
  494. "M218 Invalid extruder "
  495. "\x00"
  496. #MSG_M221_INVALID_EXTRUDER c=0 r=0
  497. "M221 Invalid extruder "
  498. "\x00"
  499. #MSG_MAIN c=0 r=0
  500. "Main"
  501. "Hlavni nabidka"
  502. #MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60 r=0
  503. "Measuring reference height of calibration point"
  504. "Merim referencni vysku kalibracniho bodu"
  505. #MSG_MESH_BED_LEVELING c=0 r=0
  506. "Mesh Bed Leveling"
  507. "\x00"
  508. #MSG_MMU_OK_RESUMING_POSITION c=20 r=4
  509. "MMU OK. Resuming position..."
  510. "MMU OK. Pokracuji v tisku..."
  511. #MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
  512. "MMU OK. Resuming temperature..."
  513. "MMU OK. Pokracuji v nahrivani..."
  514. #
  515. "Measured skew"
  516. "\x00"
  517. #MSG_MMU_OK_RESUMING c=20 r=4
  518. "MMU OK. Resuming..."
  519. "MMU OK. Pokracuji..."
  520. #MSG_STEALTH_MODE_OFF c=0 r=0
  521. "Mode [Normal]"
  522. "Mod [Normal]"
  523. #MSG_SILENT_MODE_ON c=0 r=0
  524. "Mode [silent]"
  525. "Mod [tichy]"
  526. #
  527. "MMU needs user attention."
  528. "\x00"
  529. #MSG_STEALTH_MODE_ON c=0 r=0
  530. "Mode [Stealth]"
  531. "Mod [Stealth]"
  532. #MSG_AUTO_MODE_ON c=0 r=0
  533. "Mode [auto power]"
  534. "Mod [automaticky]"
  535. #MSG_SILENT_MODE_OFF c=0 r=0
  536. "Mode [high power]"
  537. "Mod [vys. vykon]"
  538. #MSG_SELFTEST_MOTOR c=0 r=0
  539. "Motor"
  540. "\x00"
  541. #MSG_MOVE_AXIS c=0 r=0
  542. "Move axis"
  543. "Posunout osu"
  544. #MSG_MOVE_X c=0 r=0
  545. "Move X"
  546. "Posunout X"
  547. #MSG_MOVE_Y c=0 r=0
  548. "Move Y"
  549. "Posunout Y"
  550. #MSG_MOVE_Z c=0 r=0
  551. "Move Z"
  552. "Posunout Z"
  553. #MSG_ERR_NO_CHECKSUM c=0 r=0
  554. "No Checksum with line number, Last Line: "
  555. "\x00"
  556. #MSG_NO_MOVE c=0 r=0
  557. "No move."
  558. "\x00"
  559. #MSG_NO_CARD c=0 r=0
  560. "No SD card"
  561. "Zadna SD karta"
  562. #MSG_NO c=0 r=0
  563. "No"
  564. "Ne"
  565. #MSG_SELFTEST_NOTCONNECTED c=0 r=0
  566. "Not connected"
  567. "Nezapojeno "
  568. #
  569. "New firmware version available:"
  570. "\x00"
  571. #
  572. "No "
  573. "\x00"
  574. #MSG_SELFTEST_FAN_NO c=19 r=0
  575. "Not spinning"
  576. "Netoci se"
  577. #MSG_WIZARD_V2_CAL c=20 r=8
  578. "Now I will calibrate distance between tip of the nozzle and heatbed surface."
  579. "Nyni zkalibruji vzdalenost mezi koncem trysky a povrchem heatbedu."
  580. #MSG_WIZARD_WILL_PREHEAT c=20 r=4
  581. "Now I will preheat nozzle for PLA."
  582. "Nyni predehreji trysku pro PLA."
  583. #MSG_NOZZLE c=0 r=0
  584. "Nozzle"
  585. "Tryska"
  586. #MSG_OK c=0 r=0
  587. "ok"
  588. "\x00"
  589. #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
  590. "Old settings found. Default PID, Esteps etc. will be set."
  591. "Neplatne hodnoty nastaveni. Bude pouzito vychozi PID, Esteps atd."
  592. #MSG_SD_OPEN_FILE_FAIL c=0 r=0
  593. "open failed, File: "
  594. "\x00"
  595. #MSG_ENDSTOP_OPEN c=0 r=0
  596. "open"
  597. "\x00"
  598. #
  599. "Now remove the test print from steel sheet."
  600. "\x00"
  601. #MSG_SD_OPENROOT_FAIL c=0 r=0
  602. "openRoot failed"
  603. "\x00"
  604. #MSG_PAUSE_PRINT c=0 r=0
  605. "Pause print"
  606. "Pozastavit tisk"
  607. #MSG_PID_RUNNING c=20 r=1
  608. "PID cal. "
  609. "PID kal. "
  610. #MSG_PID_FINISHED c=20 r=1
  611. "PID cal. finished"
  612. "PID kal. ukoncena"
  613. #MSG_PID_EXTRUDER c=17 r=1
  614. "PID calibration"
  615. "PID kalibrace"
  616. #MSG_PINDA_PREHEAT c=20 r=1
  617. "PINDA Heating"
  618. "Nahrivani PINDA"
  619. #MSG_PAPER c=20 r=8
  620. "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
  621. "Umistete list papiru na podlozku a udrzujte jej pod tryskou behem mereni prvnich 4 bodu. Pokud tryska zachyti papir, okamzite vypnete tiskarnu."
  622. #MSG_WIZARD_CLEAN_HEATBED c=20 r=8
  623. "Please clean heatbed and then press the knob."
  624. "Prosim ocistete heatbed a stisknete tlacitko."
  625. #MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
  626. "Please clean the nozzle for calibration. Click when done."
  627. "Pro uspesnou kalibraci ocistete prosim tiskovou trysku. Potvrdte tlacitkem."
  628. #MSG_SELFTEST_PLEASECHECK c=0 r=0
  629. "Please check :"
  630. "Zkontrolujte :"
  631. #MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
  632. "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."
  633. "Prosim nahlednete do prirucky 3D tiskare a opravte problem. Pote obnovte Wizarda restartovanim tiskarny."
  634. #MSG_WIZARD_LOAD_FILAMENT c=20 r=8
  635. "Please insert PLA filament to the extruder, then press knob to load it."
  636. "Prosim vlozte PLA filament do extruderu, po te stisknete tlacitko pro zavedeni filamentu."
  637. #MSG_PLEASE_LOAD_PLA c=20 r=4
  638. "Please load PLA filament first."
  639. "Nejdrive prosim zavedte PLA filament."
  640. #MSG_CHECK_IDLER c=20 r=4
  641. "Please open idler and remove filament manually."
  642. "Prosim otevrete idler a manualne odstrante filament."
  643. #MSG_PLACE_STEEL_SHEET c=20 r=4
  644. "Please place steel sheet on heatbed."
  645. "Umistete prosim tiskovy plat na heatbed"
  646. #MSG_PRESS_TO_UNLOAD c=20 r=4
  647. "Please press the knob to unload filament"
  648. "Pro vysunuti filamentu stisknete prosim tlacitko"
  649. #
  650. "Please insert PLA filament to the first tube of MMU, then press the knob to load it."
  651. "\x00"
  652. #MSG_PULL_OUT_FILAMENT c=20 r=4
  653. "Please pull out filament immediately"
  654. "Prosim vyjmete urychlene filament"
  655. #MSG_EJECT_REMOVE c=20 r=4
  656. "Please remove filament and then press the knob."
  657. "Prosim vyjmete filament a pote stisknete tlacitko."
  658. #MSG_REMOVE_STEEL_SHEET c=20 r=4
  659. "Please remove steel sheet from heatbed."
  660. "Odstrante prosim tiskovy plat z podlozky."
  661. #MSG_RUN_XYZ c=20 r=4
  662. "Please run XYZ calibration first."
  663. "Nejprve spustte kalibraci XYZ."
  664. #MSG_UPDATE_MMU2_FW c=20 r=4
  665. "Please update firmware in your MMU2. Waiting for reset."
  666. "Prosim aktualizujte firmware ve vasi MMU2 jednotce. Cekam na reset."
  667. #MSG_PLEASE_WAIT c=20 r=0
  668. "Please wait"
  669. "Prosim cekejte"
  670. #MSG_POWERUP c=0 r=0
  671. "PowerUp"
  672. "\x00"
  673. #
  674. "Please remove shipping helpers first."
  675. "\x00"
  676. #MSG_PREHEAT_NOZZLE c=20 r=0
  677. "Preheat the nozzle!"
  678. "Predehrejte trysku!"
  679. #MSG_PREHEAT c=0 r=0
  680. "Preheat"
  681. "Predehrev"
  682. #MSG_WIZARD_HEATING c=20 r=3
  683. "Preheating nozzle. Please wait."
  684. "Predehrivam trysku. Prosim cekejte."
  685. #
  686. "Please upgrade."
  687. "\x00"
  688. #MSG_PRESS_TO_PREHEAT c=20 r=4
  689. "Press knob to preheat nozzle and continue."
  690. "Pro nahrati trysky a pokracovani stisknete tlacitko."
  691. #MSG_PRINT_ABORTED c=20 r=0
  692. "Print aborted"
  693. "Tisk prerusen"
  694. #MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
  695. "Print fan:"
  696. "Tiskovy vent.:"
  697. #MSG_CARD_MENU c=0 r=0
  698. "Print from SD"
  699. "Tisk z SD"
  700. #MSG_PRINT_PAUSED c=20 r=1
  701. "Print paused"
  702. "Tisk pozastaven"
  703. #MSG_ERR_KILLED c=0 r=0
  704. "Printer halted. kill() called!"
  705. "\x00"
  706. #
  707. "Press the knob to resume nozzle temperature."
  708. "\x00"
  709. #MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
  710. "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
  711. "Tiskarna nebyla jeste zkalibrovana. Postupujte prosim podle manualu, kapitola Zaciname, odstavec Postup kalibrace."
  712. #MSG_ERR_STOPPED c=0 r=0
  713. "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
  714. "\x00"
  715. #WELCOME_MSG c=20 r=0
  716. "Prusa i3 MK2.5 ready."
  717. "Prusa i3 MK2.5 ok"
  718. #WELCOME_MSG c=20 r=0
  719. "Prusa i3 MK3 ready."
  720. "Prusa i3 MK3 ok"
  721. #MSG_PRUSA3D c=0 r=0
  722. "prusa3d.com"
  723. "\x00"
  724. #MSG_BED_CORRECTION_REAR c=14 r=1
  725. "Rear side [um]"
  726. "Vzadu [um]"
  727. #MSG_RECOVERING_PRINT c=20 r=1
  728. "Recovering print "
  729. "Obnovovani tisku "
  730. #MSG_REMOVE_OLD_FILAMENT c=20 r=4
  731. "Remove old filament and press the knob to start loading new filament."
  732. "Vyjmete stary filament a stisknete tlacitko pro zavedeni noveho."
  733. #
  734. "Prusa i3 MK2 ready."
  735. "\x00"
  736. #MSG_CALIBRATE_BED_RESET c=0 r=0
  737. "Reset XYZ calibr."
  738. "Reset XYZ kalibr."
  739. #MSG_BED_CORRECTION_RESET c=0 r=0
  740. "Reset"
  741. "\x00"
  742. #MSG_RESUME_PRINT c=0 r=0
  743. "Resume print"
  744. "Pokracovat"
  745. #MSG_RESUMING_PRINT c=20 r=1
  746. "Resuming print"
  747. "Obnoveni tisku"
  748. #MSG_BED_CORRECTION_RIGHT c=14 r=1
  749. "Right side[um]"
  750. "Vpravo [um]"
  751. #MSG_SECOND_SERIAL_ON c=17 r=1
  752. "RPi port [on]"
  753. "RPi port [zap]"
  754. #
  755. "Resend"
  756. "\x00"
  757. #MSG_SECOND_SERIAL_OFF c=17 r=1
  758. "RPi port [off]"
  759. "RPi port [vyp]"
  760. #MSG_WIZARD_RERUN c=20 r=7
  761. "Running Wizard will delete current calibration results and start from the beginning. Continue?"
  762. "Spusteni Wizarda vymaze ulozene vysledky vsech kalibraci a spusti kalibracni proces od zacatku. Pokracovat?"
  763. #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1
  764. "SD card [normal]"
  765. "SD card [normal]"
  766. #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
  767. "SD card [flshAir]"
  768. "\x00"
  769. #MSG_SD_CARD_OK c=0 r=0
  770. "SD card ok"
  771. "\x00"
  772. #
  773. "Right"
  774. "\x00"
  775. #MSG_SD_INIT_FAIL c=0 r=0
  776. "SD init fail"
  777. "\x00"
  778. #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
  779. "Searching bed calibration point"
  780. "Hledam kalibracni bod podlozky"
  781. #MSG_LANGUAGE_SELECT c=0 r=0
  782. "Select language"
  783. "Vyber jazyka"
  784. #MSG_SELFTEST_OK c=0 r=0
  785. "Self test OK"
  786. "\x00"
  787. #MSG_SELFTEST_START c=20 r=0
  788. "Self test start "
  789. "Self test start "
  790. #MSG_SELFTEST c=0 r=0
  791. "Selftest "
  792. "Selftest "
  793. #MSG_SELFTEST_ERROR c=0 r=0
  794. "Selftest error !"
  795. "\x00"
  796. #MSG_SELFTEST_FAILED c=20 r=0
  797. "Selftest failed "
  798. "Selftest selhal "
  799. #MSG_FORCE_SELFTEST c=20 r=8
  800. "Selftest will be run to calibrate accurate sensorless rehoming."
  801. "Pro kalibraci presneho rehomovani bude nyni spusten selftest."
  802. #
  803. "Select nozzle preheat temperature which matches your material."
  804. "\x00"
  805. #
  806. "Select PLA filament:"
  807. "\x00"
  808. #MSG_SET_TEMPERATURE c=19 r=1
  809. "Set temperature:"
  810. "Nastavte teplotu:"
  811. #MSG_SETTINGS c=0 r=0
  812. "Settings"
  813. "Nastaveni"
  814. #MSG_SHOW_END_STOPS c=17 r=1
  815. "Show end stops"
  816. "Stav konc. spin."
  817. #
  818. "Show pinda state"
  819. "Stav PINDA"
  820. #MSG_DWELL c=0 r=0
  821. "Sleep..."
  822. "\x00"
  823. #MSG_FILE_CNT c=20 r=4
  824. "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
  825. "Nektere soubory nebudou setrideny. Maximalni pocet souboru ve slozce pro setrideni je 100."
  826. #MSG_SORT_NONE c=17 r=1
  827. "Sort: [none]"
  828. "Trideni [Zadne]"
  829. #MSG_SORT_TIME c=17 r=1
  830. "Sort: [time]"
  831. "Trideni [Cas]"
  832. #
  833. "Severe skew"
  834. "\x00"
  835. #MSG_SORT_ALPHA c=17 r=1
  836. "Sort: [alphabet]"
  837. "Trideni [Abeceda]"
  838. #MSG_SORTING c=20 r=1
  839. "Sorting files"
  840. "Trideni souboru"
  841. #MSG_SOUND_LOUD c=17 r=1
  842. "Sound [loud]"
  843. "Zvuk [hlasity]"
  844. #
  845. "Slight skew"
  846. "\x00"
  847. #MSG_SOUND_MUTE c=17 r=1
  848. "Sound [mute]"
  849. "Zvuk [vypnuto]"
  850. #
  851. "Some problem encountered, Z-leveling enforced ..."
  852. "\x00"
  853. #MSG_SOUND_ONCE c=17 r=1
  854. "Sound [once]"
  855. "Zvuk [jednou]"
  856. #MSG_SOUND_SILENT c=17 r=1
  857. "Sound [silent]"
  858. "Zvuk [tichy]"
  859. #MSG_SPEED c=0 r=0
  860. "Speed"
  861. "Rychlost"
  862. #MSG_SELFTEST_FAN_YES c=19 r=0
  863. "Spinning"
  864. "Toci se"
  865. #MSG_TEMP_CAL_WARNING c=20 r=4
  866. "Stable ambient temperature 21-26C is needed a rigid stand is required."
  867. "Je vyzadovana stabilni pokojova teplota 21-26C a pevna podlozka."
  868. #MSG_STATISTICS c=0 r=0
  869. "Statistics "
  870. "Statistika "
  871. #MSG_STOP_PRINT c=0 r=0
  872. "Stop print"
  873. "Zastavit tisk"
  874. #MSG_STOPPED c=0 r=0
  875. "STOPPED. "
  876. "\x00"
  877. #MSG_SUPPORT c=0 r=0
  878. "Support"
  879. "Podpora"
  880. #MSG_SELFTEST_SWAPPED c=0 r=0
  881. "Swapped"
  882. "Prohozene"
  883. #MSG_TEMP_CALIBRATION c=20 r=1
  884. "Temp. cal. "
  885. "Tepl. kal. "
  886. #MSG_TEMP_CALIBRATION_ON c=20 r=1
  887. "Temp. cal. [on]"
  888. "Tepl. kal. [zap]"
  889. #MSG_TEMP_CALIBRATION_OFF c=20 r=1
  890. "Temp. cal. [off]"
  891. "Tepl. kal. [vyp]"
  892. #MSG_CALIBRATION_PINDA_MENU c=17 r=1
  893. "Temp. calibration"
  894. "Teplot. kalibrace"
  895. #MSG_TEMP_CAL_FAILED c=20 r=8
  896. "Temperature calibration failed"
  897. "Teplotni kalibrace selhala"
  898. #MSG_TEMP_CALIBRATION_DONE c=20 r=12
  899. "Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
  900. "Teplotni kalibrace dokoncena a je nyni aktivni. Teplotni kalibraci je mozno deaktivovat v menu Nastaveni->Tepl. kal."
  901. #MSG_TEMPERATURE c=0 r=0
  902. "Temperature"
  903. "Teplota"
  904. #MSG_MENU_TEMPERATURES c=15 r=1
  905. "Temperatures"
  906. "Teploty"
  907. #MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=4
  908. "There is still a need to make Z calibration. Please follow the manual, chapter First steps, section Calibration flow."
  909. "Je potreba kalibrovat osu Z. Prosim postupujte dle prirucky, kapitola Zaciname, sekce Postup kalibrace."
  910. #
  911. "Total filament"
  912. "Celkem fileament"
  913. #
  914. "Total print time"
  915. "Celkovy cas tisku"
  916. #MSG_ENDSTOP_HIT c=0 r=0
  917. "TRIGGERED"
  918. "\x00"
  919. #MSG_TUNE c=0 r=0
  920. "Tune"
  921. "Ladit"
  922. #
  923. "Unload"
  924. "\x00"
  925. #
  926. "Unload all"
  927. "\x00"
  928. #MSG_UNLOAD_FILAMENT c=17 r=0
  929. "Unload filament"
  930. "Vyjmout filament"
  931. #MSG_UNLOADING_FILAMENT c=20 r=1
  932. "Unloading filament"
  933. "Vysouvam filament"
  934. #MSG_USED c=19 r=1
  935. "Used during print"
  936. "Pouzite behem tisku"
  937. #MSG_MENU_VOLTAGES c=15 r=1
  938. "Voltages"
  939. "Napeti"
  940. #MSG_SD_VOL_INIT_FAIL c=0 r=0
  941. "volume.init failed"
  942. "\x00"
  943. #MSG_USERWAIT c=0 r=0
  944. "Wait for user..."
  945. "\x00"
  946. #MSG_WAITING_TEMP c=20 r=3
  947. "Waiting for nozzle and bed cooling"
  948. "Cekani na zchladnuti trysky a podlozky."
  949. #MSG_WAITING_TEMP_PINDA c=20 r=3
  950. "Waiting for PINDA probe cooling"
  951. "Cekani na zchladnuti PINDA"
  952. #
  953. "Use unload to remove filament 1 if it protrudes outside of the rear MMU tube. Use eject if it is hidden in tube."
  954. "\x00"
  955. #MSG_CHANGED_BOTH c=20 r=4
  956. "Warning: both printer type and motherboard type changed."
  957. "Varovani: doslo ke zmene typu tiskarny a motherboardu."
  958. #MSG_CHANGED_MOTHERBOARD c=20 r=4
  959. "Warning: motherboard type changed."
  960. "Varovani: doslo ke zmene typu motherboardu."
  961. #MSG_CHANGED_PRINTER c=20 r=4
  962. "Warning: printer type changed."
  963. "Varovani: doslo ke zmene typu tiskarny."
  964. #MSG_UNLOAD_SUCCESSFUL c=20 r=2
  965. "Was filament unload successful?"
  966. "Bylo vysunuti filamentu uspesne?"
  967. #MSG_SELFTEST_WIRINGERROR c=0 r=0
  968. "Wiring error"
  969. "Chyba zapojeni"
  970. #MSG_WIZARD c=17 r=1
  971. "Wizard"
  972. "\x00"
  973. #MSG_XYZ_DETAILS c=19 r=1
  974. "XYZ cal. details"
  975. "Detaily XYZ kal."
  976. #MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
  977. "XYZ calibration failed. Please consult the manual."
  978. "Kalibrace XYZ selhala. Nahlednete do manualu."
  979. #MSG_YES c=0 r=0
  980. "Yes"
  981. "Ano"
  982. #MSG_WIZARD_QUIT c=20 r=8
  983. "You can always resume the Wizard from Calibration -> Wizard."
  984. "Wizarda muzete kdykoliv znovu spustit z menu Calibration -> Wizard"
  985. #MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
  986. "XYZ calibration all right. Skew will be corrected automatically."
  987. "Kalibrace XYZ v poradku. Zkoseni bude automaticky vyrovnano pri tisku."
  988. #MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
  989. "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
  990. "Kalibrace XYZ v poradku. X/Y osy mirne zkosene. Dobra prace!"
  991. #
  992. "X-correct"
  993. "\x00"
  994. #MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
  995. "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
  996. "Kalibrace XYZ v poradku. X/Y osy jsou kolme. Gratuluji!"
  997. #MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
  998. "XYZ calibration compromised. Front calibration points not reachable."
  999. "Kalibrace XYZ nepresna. Predni kalibracni body moc vpredu."
  1000. #MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
  1001. "XYZ calibration compromised. Right front calibration point not reachable."
  1002. "Kalibrace XYZ nepresna. Pravy predni bod moc vpredu."
  1003. #MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
  1004. "XYZ calibration compromised. Left front calibration point not reachable."
  1005. "Kalibrace XYZ nepresna. Levy predni bod moc vpredu."
  1006. #MSG_LOAD_ALL c=17 r=0
  1007. "Load all"
  1008. "Zavest vse"
  1009. #MSG_LOAD_FILAMENT_1 c=17 r=0
  1010. "Load filament 1"
  1011. "Zavest filament 1"
  1012. #
  1013. "XYZ calibration failed. Bed calibration point was not found."
  1014. "\x00"
  1015. #
  1016. "XYZ calibration failed. Front calibration points not reachable."
  1017. "\x00"
  1018. #
  1019. "XYZ calibration failed. Left front calibration point not reachable."
  1020. "\x00"
  1021. #MSG_LOAD_FILAMENT_2 c=17 r=0
  1022. "Load filament 2"
  1023. "Zavest filament 2"
  1024. #
  1025. "XYZ calibration failed. Right front calibration point not reachable."
  1026. "\x00"
  1027. #MSG_LOAD_FILAMENT_3 c=17 r=0
  1028. "Load filament 3"
  1029. "Zavest filament 3"
  1030. #
  1031. "Y distance from min"
  1032. "\x00"
  1033. #
  1034. "Y-correct"
  1035. "\x00"
  1036. #MSG_LOAD_FILAMENT_4 c=17 r=0
  1037. "Load filament 4"
  1038. "Zavest filament 4"
  1039. #MSG_LOAD_FILAMENT_5 c=17 r=0
  1040. "Load filament 5"
  1041. "Zavest filament 5"
  1042. #MSG_OFF c=0 r=0
  1043. " [off]"
  1044. " [vyp]"