sound edit, delete mute mode, add blind mode

Firmware/Marlin_main.cpp

@@ -659,19 +659,13 @@ static void factory_reset(char level)
                    
         // Level 0: Language reset
         case 0:
-if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
-            WRITE(BEEPER, HIGH);
-            _delay_ms(100);
-            WRITE(BEEPER, LOW);
+      Sound_MakeCustom(100,0,false);
 			lang_reset();
             break;
          
 		//Level 1: Reset statistics
 		case 1:
-if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
-			WRITE(BEEPER, HIGH);
-			_delay_ms(100);
-			WRITE(BEEPER, LOW);
+      Sound_MakeCustom(100,0,false);
 			eeprom_update_dword((uint32_t *)EEPROM_TOTALTIME, 0);
 			eeprom_update_dword((uint32_t *)EEPROM_FILAMENTUSED, 0);
 
@@ -726,11 +720,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
 			fsensor_enable();
             fsensor_autoload_set(true);
 #endif //FILAMENT_SENSOR
-                       
-if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
-            WRITE(BEEPER, HIGH);
-            _delay_ms(100);
-            WRITE(BEEPER, LOW);
+      Sound_MakeCustom(100,0,false);   
 			//_delay_ms(2000);
             break;
 
@@ -740,11 +730,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
 			lcd_puts_P(PSTR("Factory RESET"));
 			lcd_puts_at_P(1, 2, PSTR("ERASING all data"));
 
-if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
-			WRITE(BEEPER, HIGH);
-			_delay_ms(100);
-			WRITE(BEEPER, LOW);
-
+      Sound_MakeCustom(100,0,false);
 			er_progress = 0;
 			lcd_puts_at_P(3, 3, PSTR("      "));
 			lcd_set_cursor(3, 3);
@@ -814,7 +800,7 @@ void factory_reset()
 
 
 			SET_OUTPUT(BEEPER);
-if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
+  if(eSoundMode!=e_SOUND_MODE_SILENT)
 			WRITE(BEEPER, HIGH);
 
 			while (!READ(BTN_ENC));
@@ -2356,11 +2342,7 @@ void refresh_cmd_timeout(void)
 #endif //FWRETRACT
 
 void trace() {
-//if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
-    _tone(BEEPER, 440);
-    _delay(25);
-    _noTone(BEEPER);
-    _delay(20);
+    Sound_MakeCustom(25,440,true);
 }
 /*
 void ramming() {
@@ -3173,9 +3155,7 @@ void gcode_M701()
 		load_filament_final_feed(); //slow sequence
 		st_synchronize();
 
-		if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE)) _tone(BEEPER, 500);
-		delay_keep_alive(50);
-		_noTone(BEEPER);
+    Sound_MakeCustom(50,500,false);
 
 		if (!farm_mode && loading_flag) {
 			lcd_load_filament_color_check();
@@ -3706,7 +3686,7 @@ void process_commands()
                             
                             SET_OUTPUT(BEEPER);
                             if (counterBeep== 0){
-if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
+if(eSoundMode!=e_SOUND_MODE_SILENT)
                               WRITE(BEEPER,HIGH);
                             }
                             
@@ -6372,10 +6352,7 @@ Sigma_Exit:
       if (beepS > 0)
       {
         #if BEEPER > 0
-if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
-          _tone(BEEPER, beepS);
-          _delay(beepP);
-          _noTone(BEEPER);
+          Sound_MakeCustom(beepP,beepS,false);
         #endif
       }
       else
@@ -7674,10 +7651,7 @@ bool bInhibitFlag;
 //-//					if (degHotend0() > EXTRUDE_MINTEMP)
 if(0)
 					{
-						if ((eSoundMode == e_SOUND_MODE_LOUD) || (eSoundMode == e_SOUND_MODE_ONCE))
-							_tone(BEEPER, 1000);
-						delay_keep_alive(50);
-						_noTone(BEEPER);
+            Sound_MakeCustom(50,1000,false);
 						loading_flag = true;
 						enquecommand_front_P((PSTR("M701")));
 					}
@@ -9509,7 +9483,7 @@ void M600_wait_for_user(float HotendTempBckp) {
 			}
 			SET_OUTPUT(BEEPER);
 			if (counterBeep == 0) {
-				if((eSoundMode==e_SOUND_MODE_LOUD)||((eSoundMode==e_SOUND_MODE_ONCE)&&bFirst))
+				if((eSoundMode==e_SOUND_MODE_BLIND)|| (eSoundMode==e_SOUND_MODE_LOUD)||((eSoundMode==e_SOUND_MODE_ONCE)&&bFirst))
 				{
 					bFirst=false;
 					WRITE(BEEPER, HIGH);
@@ -9612,10 +9586,7 @@ void M600_load_filament() {
 #ifdef FILAMENT_SENSOR
 		if (fsensor_check_autoload())
 		{
-if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
-			_tone(BEEPER, 1000);
-			delay_keep_alive(50);
-			_noTone(BEEPER);
+      Sound_MakeCustom(50,1000,false);
 			break;
 		}
 #endif //FILAMENT_SENSOR
@@ -9631,10 +9602,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
 
 	M600_load_filament_movements();
 
-if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
-	_tone(BEEPER, 500);
-	delay_keep_alive(50);
-	_noTone(BEEPER);
+      Sound_MakeCustom(50,1000,false);
 
 #ifdef FSENSOR_QUALITY
 	fsensor_oq_meassure_stop();

Firmware/lcd.cpp

@@ -704,15 +704,12 @@ uint8_t lcd_clicked(void)
 
 void lcd_beeper_quick_feedback(void)
 {
-	SET_OUTPUT(BEEPER);
 //-//
 Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
 /*
 	for(int8_t i = 0; i < 10; i++)
 	{
-		WRITE(BEEPER,HIGH);
-		delayMicroseconds(100);
-		WRITE(BEEPER,LOW);
+		Sound_MakeCustom(100,0,false);
 		delayMicroseconds(100);
 	}
 */

Firmware/menu.cpp

@@ -11,8 +11,7 @@
 #include "ultralcd.h"
 #include "language.h"
 #include "static_assert.h"
-
-
+#include "sound.h"
 
 extern int32_t lcd_encoder;
 
@@ -65,7 +64,11 @@ void menu_goto(menu_func_t menu, const uint32_t encoder, const bool feedback, bo
 void menu_start(void)
 {
     if (lcd_encoder > 0x8000) lcd_encoder = 0;
-    if (lcd_encoder < 0) lcd_encoder = 0;
+    if (lcd_encoder < 0)
+    {
+        lcd_encoder = 0;
+		Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
+    }
     if (lcd_encoder < menu_top)
 		menu_top = lcd_encoder;
     menu_line = menu_top;
@@ -75,7 +78,10 @@ void menu_start(void)
 void menu_end(void)
 {
 	if (lcd_encoder >= menu_item)
+	{
 		lcd_encoder = menu_item - 1;
+		Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
+	}
 	if (((uint8_t)lcd_encoder) >= menu_top + LCD_HEIGHT)
 	{
 		menu_top = lcd_encoder - LCD_HEIGHT + 1;

Firmware/mmu.cpp

@@ -831,7 +831,7 @@ void mmu_M600_wait_and_beep() {
 			}
 			SET_OUTPUT(BEEPER);
 			if (counterBeep == 0) {
-				if((eSoundMode==e_SOUND_MODE_LOUD)||((eSoundMode==e_SOUND_MODE_ONCE)&&bFirst))
+				if((eSoundMode==e_SOUND_MODE_BLIND)|| (eSoundMode==e_SOUND_MODE_LOUD)||((eSoundMode==e_SOUND_MODE_ONCE)&&bFirst))
 				{
 					bFirst=false;
 					WRITE(BEEPER, HIGH);

Firmware/sound.cpp

@@ -17,7 +17,8 @@ static void Sound_SaveMode(void);
 static void Sound_DoSound_Echo(void);
 static void Sound_DoSound_Prompt(void);
 static void Sound_DoSound_Alert(bool bOnce);
-
+static void Sound_DoSound_Encoder_Move(void);
+static void Sound_DoSound_Blind_Alert(void);
 
 void Sound_Init(void)
 {
@@ -49,9 +50,9 @@ switch(eSoundMode)
           eSoundMode=e_SOUND_MODE_SILENT;
           break;
      case e_SOUND_MODE_SILENT:
-          eSoundMode=e_SOUND_MODE_MUTE;
+          eSoundMode=e_SOUND_MODE_BLIND;
           break;
-     case e_SOUND_MODE_MUTE:
+     case e_SOUND_MODE_BLIND:
           eSoundMode=e_SOUND_MODE_LOUD;
           break;
      default:
@@ -60,6 +61,36 @@ switch(eSoundMode)
 Sound_SaveMode();
 }
 
+void Sound_MakeCustom(uint16_t ms,uint16_t tone_,bool critical){
+     if (!critical){
+          if (eSoundMode != e_SOUND_MODE_SILENT){
+               if(!tone_){
+                    WRITE(BEEPER, HIGH);
+                    delayMicroseconds(ms);
+                    WRITE(BEEPER, LOW);
+               }
+               else{
+                    _tone(BEEPER, tone_);
+                    delay_keep_alive(ms);
+                    _noTone(BEEPER);
+               }
+          }
+     }
+     else{
+          if(!tone_){
+               WRITE(BEEPER, HIGH);
+               delayMicroseconds(ms);
+               WRITE(BEEPER, LOW);
+               delayMicroseconds(100);
+          }
+          else{
+               _tone(BEEPER, tone_);
+               delay_keep_alive(ms);
+               _noTone(BEEPER);
+          }
+     }
+}
+
 void Sound_MakeSound(eSOUND_TYPE eSoundType)
 {
 switch(eSoundMode)
@@ -84,13 +115,43 @@ switch(eSoundMode)
           if(eSoundType==e_SOUND_TYPE_StandardAlert)
                Sound_DoSound_Alert(true);
           break;
-     case e_SOUND_MODE_MUTE:
-          break;
+     case e_SOUND_MODE_BLIND:
+          if(eSoundType==e_SOUND_TYPE_ButtonEcho)
+               Sound_DoSound_Echo();
+          if(eSoundType==e_SOUND_TYPE_StandardPrompt)
+               Sound_DoSound_Prompt();
+          if(eSoundType==e_SOUND_TYPE_StandardAlert)
+               Sound_DoSound_Alert(false);
+          if(eSoundType==e_SOUND_TYPE_EncoderMove)
+               Sound_DoSound_Encoder_Move();
+          if(eSoundType==e_SOUND_TYPE_BlindAlert)
+               Sound_DoSound_Blind_Alert();
+               break;
      default:
-          ;
+          break;
      }
 }
 
+static void Sound_DoSound_Blind_Alert(void)
+{
+     _tone(BEEPER,100);
+     delay_keep_alive(50);
+     _noTone(BEEPER);
+     delay_keep_alive(200);
+}
+
+ static void Sound_DoSound_Encoder_Move(void)
+{
+uint8_t nI;
+
+ for(nI=0;nI<5;nI++)
+     {
+     WRITE(BEEPER,HIGH);
+     delayMicroseconds(75);
+     WRITE(BEEPER,LOW);
+     delayMicroseconds(75);
+     }
+}
 
 static void Sound_DoSound_Echo(void)
 {

Firmware/sound.h

@@ -1,3 +1,4 @@
+#include <stdint.h>
 #ifndef SOUND_H
 #define SOUND_H
 
@@ -5,16 +6,16 @@
 #define MSG_SOUND_MODE_LOUD "Sound      [loud]"
 #define MSG_SOUND_MODE_ONCE "Sound      [once]"
 #define MSG_SOUND_MODE_SILENT "Sound    [silent]"
-#define MSG_SOUND_MODE_MUTE "Sound      [mute]"
+#define MSG_SOUND_MODE_BLIND "Sound      [blind]" 
 
 
 #define e_SOUND_MODE_NULL 0xFF
 typedef enum
-     {e_SOUND_MODE_LOUD,e_SOUND_MODE_ONCE,e_SOUND_MODE_SILENT,e_SOUND_MODE_MUTE} eSOUND_MODE;
+     {e_SOUND_MODE_LOUD,e_SOUND_MODE_ONCE,e_SOUND_MODE_SILENT,e_SOUND_MODE_BLIND} eSOUND_MODE;
 #define e_SOUND_MODE_DEFAULT e_SOUND_MODE_LOUD
 
 typedef enum
-     {e_SOUND_TYPE_ButtonEcho,e_SOUND_TYPE_EncoderEcho,e_SOUND_TYPE_StandardPrompt,e_SOUND_TYPE_StandardConfirm,e_SOUND_TYPE_StandardWarning,e_SOUND_TYPE_StandardAlert} eSOUND_TYPE;
+     {e_SOUND_TYPE_ButtonEcho,e_SOUND_TYPE_EncoderEcho,e_SOUND_TYPE_StandardPrompt,e_SOUND_TYPE_StandardConfirm,e_SOUND_TYPE_StandardWarning,e_SOUND_TYPE_StandardAlert,e_SOUND_TYPE_EncoderMove,e_SOUND_TYPE_BlindAlert} eSOUND_TYPE;
 typedef enum
      {e_SOUND_CLASS_Echo,e_SOUND_CLASS_Prompt,e_SOUND_CLASS_Confirm,e_SOUND_CLASS_Warning,e_SOUND_CLASS_Alert} eSOUND_CLASS;
 
@@ -27,6 +28,7 @@ extern void Sound_Default(void);
 extern void Sound_Save(void);
 extern void Sound_CycleState(void);
 extern void Sound_MakeSound(eSOUND_TYPE eSoundType);
+extern void Sound_MakeCustom(uint16_t ms,uint16_t tone_ ,bool critical);
 
 //static void Sound_DoSound_Echo(void);
 //static void Sound_DoSound_Prompt(void);

Firmware/temperature.cpp

@@ -541,22 +541,14 @@ void fanSpeedError(unsigned char _fan) {
 	case 0:
 			SERIAL_ECHOLNPGM("Extruder fan speed is lower then expected");
 			if (get_message_level() == 0) {
-if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE)||(eSoundMode==e_SOUND_MODE_SILENT))
-				WRITE(BEEPER, HIGH);
-				delayMicroseconds(200);
-				WRITE(BEEPER, LOW);
-				delayMicroseconds(100);
+        Sound_MakeCustom(200,0,true);
 				LCD_ALERTMESSAGEPGM("Err: EXTR. FAN ERROR");
 			}
 		break;
 	case 1:
 			SERIAL_ECHOLNPGM("Print fan speed is lower then expected");
 			if (get_message_level() == 0) {
-if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE)||(eSoundMode==e_SOUND_MODE_SILENT))
-				WRITE(BEEPER, HIGH);
-				delayMicroseconds(200);
-				WRITE(BEEPER, LOW);
-				delayMicroseconds(100);
+        Sound_MakeCustom(200,0,true);
 				LCD_ALERTMESSAGEPGM("Err: PRINT FAN ERROR");
 			}
 		break;
@@ -1398,13 +1390,9 @@ void temp_runaway_stop(bool isPreheat, bool isBed)
 	disable_e2();
 	manage_heater();
 	lcd_update(0);
-if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE)||(eSoundMode==e_SOUND_MODE_SILENT))
-	WRITE(BEEPER, HIGH);
-	delayMicroseconds(500);
-	WRITE(BEEPER, LOW);
-	delayMicroseconds(100);
-
-	if (isPreheat)
+  Sound_MakeCustom(200,0,true);
+	
+  if (isPreheat)
 	{
 		Stop();
 		isBed ? LCD_ALERTMESSAGEPGM("BED PREHEAT ERROR") : LCD_ALERTMESSAGEPGM("PREHEAT ERROR");
@@ -1489,7 +1477,6 @@ void max_temp_error(uint8_t e) {
     SET_OUTPUT(BEEPER);
     WRITE(FAN_PIN, 1);
     WRITE(EXTRUDER_0_AUTO_FAN_PIN, 1);
-if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE)||(eSoundMode==e_SOUND_MODE_SILENT))
     WRITE(BEEPER, 1);
     // fanSpeed will consumed by the check_axes_activity() routine.
     fanSpeed=255;

Firmware/ultralcd.cpp

@@ -2867,10 +2867,12 @@ void lcd_alright() {
 
         if (cursor_pos > 3) {
           cursor_pos = 3;
+					Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
         }
 
         if (cursor_pos < 1) {
           cursor_pos = 1;
+					Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
         }
         lcd_set_cursor(0, 1);
         lcd_print(" ");
@@ -2881,6 +2883,7 @@ void lcd_alright() {
         lcd_set_cursor(0, cursor_pos);
         lcd_print(">");
         enc_dif = lcd_encoder_diff;
+				Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
         _delay(100);
       }
 
@@ -2888,7 +2891,7 @@ void lcd_alright() {
 
 
     if (lcd_clicked()) {
-
+			Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
       lcd_change_fil_state = cursor_pos;
       _delay(500);
 
@@ -3845,20 +3848,24 @@ int8_t lcd_show_multiscreen_message_two_choices_and_wait_P(const char *msg, bool
 						lcd_set_cursor(7, 3);
 						lcd_puts_P((PSTR(">")));
 						yes = false;
+						Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
 					}
 					else if (enc_dif > lcd_encoder_diff && !yes) {
 						lcd_puts_P((PSTR(">")));
 						lcd_set_cursor(7, 3);
 						lcd_puts_P((PSTR(" ")));
 						yes = true;
+						Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
 					}
 					enc_dif = lcd_encoder_diff;
 				}
 				else {
+					Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
 					break; //turning knob skips waiting loop
 				}
 			}
 			if (lcd_clicked()) {
+				Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
 				if (msg_next == NULL) {
 					//KEEPALIVE_STATE(IN_HANDLER);
 					lcd_set_custom_characters();
@@ -3931,16 +3938,20 @@ int8_t lcd_show_fullscreen_message_yes_no_and_wait_P(const char *msg, bool allow
 					lcd_set_cursor(0, 3);
 					lcd_puts_P((PSTR(">")));
 					yes = false;
+					Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
+
 				}
 				else if (enc_dif > lcd_encoder_diff && !yes) {
 					lcd_puts_P((PSTR(">")));
 					lcd_set_cursor(0, 3);
 					lcd_puts_P((PSTR(" ")));
 					yes = true;
+					Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
 				}
 				enc_dif = lcd_encoder_diff;
 		}
 		if (lcd_clicked()) {
+			Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
 			KEEPALIVE_STATE(IN_HANDLER);
 			return yes;
 		}
@@ -5441,8 +5452,8 @@ do\
          case e_SOUND_MODE_SILENT:\
               MENU_ITEM_FUNCTION_P(_i(MSG_SOUND_MODE_SILENT),lcd_sound_state_set);\
               break;\
-         case e_SOUND_MODE_MUTE:\
-              MENU_ITEM_FUNCTION_P(_i(MSG_SOUND_MODE_MUTE),lcd_sound_state_set);\
+         case e_SOUND_MODE_BLIND:\
+              MENU_ITEM_FUNCTION_P(_i(MSG_SOUND_MODE_BLIND),lcd_sound_state_set);\
               break;\
          default:\
               MENU_ITEM_FUNCTION_P(_i(MSG_SOUND_MODE_LOUD),lcd_sound_state_set);\
@@ -5620,10 +5631,12 @@ void bowden_menu() {
 
 				if (cursor_pos > 3) {
 					cursor_pos = 3;
+					Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
 				}
 
 				if (cursor_pos < 0) {
 					cursor_pos = 0;
+					Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
 				}
 
 				lcd_set_cursor(0, 0);
@@ -5636,13 +5649,13 @@ void bowden_menu() {
 				lcd_print(" ");
 				lcd_set_cursor(0, cursor_pos);
 				lcd_print(">");
-
+				Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
 				enc_dif = lcd_encoder_diff;
 				_delay(100);
 		}
 
 		if (lcd_clicked()) {
-
+			Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
 			lcd_clear();
 			while (1) {
 
@@ -5673,6 +5686,7 @@ void bowden_menu() {
 				}
 				_delay(100);
 				if (lcd_clicked()) {
+					Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
 					EEPROM_save_B(EEPROM_BOWDEN_LENGTH + cursor_pos * 2, &bowden_length[cursor_pos]);
 					if (lcd_show_fullscreen_message_yes_no_and_wait_P(PSTR("Continue with another bowden?"))) {
 						lcd_update_enable(true);
@@ -5718,8 +5732,14 @@ static char snmm_stop_print_menu() { //menu for choosing which filaments will be
 			if ((abs(enc_dif - lcd_encoder_diff)) > 1) {
 				if (enc_dif > lcd_encoder_diff) cursor_pos--;
 				if (enc_dif < lcd_encoder_diff) cursor_pos++;
-				if (cursor_pos > 3) cursor_pos = 3;
-				if (cursor_pos < 1) cursor_pos = 1;
+				if (cursor_pos > 3) {
+					cursor_pos = 3;
+					Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
+				}
+				if (cursor_pos < 1){
+					cursor_pos = 1;
+					Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
+				}	
 
 				lcd_set_cursor(0, 1);
 				lcd_print(" ");
@@ -5730,10 +5750,12 @@ static char snmm_stop_print_menu() { //menu for choosing which filaments will be
 				lcd_set_cursor(0, cursor_pos);
 				lcd_print(">");
 				enc_dif = lcd_encoder_diff;
+				Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
 				_delay(100);
 			}
 		}
 		if (lcd_clicked()) {
+			Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
 			KEEPALIVE_STATE(IN_HANDLER);
 			return(cursor_pos - 1);
 		}
@@ -5785,7 +5807,8 @@ uint8_t choose_menu_P(const char *header, const char *item, const char *last_ite
 		}
 
 		if (cursor_pos > 3)
-		{
+		{		
+			Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
             cursor_pos = 3;
             if (first < items_no - 3)
             {
@@ -5796,6 +5819,7 @@ uint8_t choose_menu_P(const char *header, const char *item, const char *last_ite
 
         if (cursor_pos < 1)
         {
+					Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
             cursor_pos = 1;
             if (first > 0)
             {
@@ -5830,11 +5854,12 @@ uint8_t choose_menu_P(const char *header, const char *item, const char *last_ite
         lcd_print(" ");
         lcd_set_cursor(0, cursor_pos);
         lcd_print(">");
-
+				Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
         _delay(100);
 
 		if (lcd_clicked())
 		{
+			Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
 		    KEEPALIVE_STATE(IN_HANDLER);
 			lcd_encoder_diff = 0;
 			return(cursor_pos + first - 1);
@@ -5889,6 +5914,7 @@ char reset_menu() {
 
 				if (cursor_pos > 3) {
 					cursor_pos = 3;
+					Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
 					if (first < items_no - 4) {
 						first++;
 						lcd_clear();
@@ -5897,6 +5923,7 @@ char reset_menu() {
 
 				if (cursor_pos < 0) {
 					cursor_pos = 0;
+					Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
 					if (first > 0) {
 						first--;
 						lcd_clear();
@@ -5912,6 +5939,7 @@ char reset_menu() {
 				lcd_print(" ");
 				lcd_set_cursor(0, cursor_pos);
 				lcd_print(">");
+				Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
 				enc_dif = lcd_encoder_diff;
 				_delay(100);
 			}
@@ -5919,6 +5947,7 @@ char reset_menu() {
 		}
 
 		if (lcd_clicked()) {
+			Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
 			return(cursor_pos + first);
 		}
 
@@ -6227,6 +6256,7 @@ unsigned char lcd_choose_color() {
 				
 				if (cursor_pos > active_rows) {
 					cursor_pos = active_rows;
+					Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
 					if (first < items_no - active_rows) {
 						first++;
 						lcd_clear();
@@ -6235,6 +6265,7 @@ unsigned char lcd_choose_color() {
 
 				if (cursor_pos < 1) {
 					cursor_pos = 1;
+					Sound_MakeSound(e_SOUND_TYPE_BlindAlert);
 					if (first > 0) {
 						first--;
 						lcd_clear();
@@ -6248,12 +6279,14 @@ unsigned char lcd_choose_color() {
 				lcd_print(" ");
 				lcd_set_cursor(0, cursor_pos);
 				lcd_print(">");
+				Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
 				enc_dif = lcd_encoder_diff;
 				_delay(100);
 
 		}
 
 		if (lcd_clicked()) {
+			Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
 			switch(cursor_pos + first - 1) {
 			case 0: return 1; break;
 			case 1: return 0; break;
@@ -6565,11 +6598,7 @@ static void lcd_main_menu()
 }
 
 void stack_error() {
-	SET_OUTPUT(BEEPER);
-if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE)||(eSoundMode==e_SOUND_MODE_SILENT))
-	WRITE(BEEPER, HIGH);
-	_delay(1000);
-	WRITE(BEEPER, LOW);
+	Sound_MakeCustom(1000,0,true);
 	lcd_display_message_fullscreen_P(_i("Error - static memory has been overwritten"));////MSG_STACK_ERROR c=20 r=4
 	//err_triggered = 1;
 	 while (1) delay_keep_alive(1000);
@@ -6696,8 +6725,8 @@ static void lcd_tune_menu()
           case e_SOUND_MODE_SILENT:
                MENU_ITEM_FUNCTION_P(_i(MSG_SOUND_MODE_SILENT),lcd_sound_state_set);
                break;
-          case e_SOUND_MODE_MUTE:
-               MENU_ITEM_FUNCTION_P(_i(MSG_SOUND_MODE_MUTE),lcd_sound_state_set);
+          case e_SOUND_MODE_BLIND:
+               MENU_ITEM_FUNCTION_P(_i(MSG_SOUND_MODE_BLIND),lcd_sound_state_set);
                break;
           default:
                MENU_ITEM_FUNCTION_P(_i(MSG_SOUND_MODE_LOUD),lcd_sound_state_set);
@@ -6856,6 +6885,7 @@ void lcd_sdcard_stop()
 
 	if (lcd_clicked())
 	{
+		Sound_MakeSound(e_SOUND_TYPE_ButtonEcho);
 		if ((int32_t)lcd_encoder == 1)
 		{
 			lcd_return_to_status();
@@ -8366,6 +8396,7 @@ void menu_lcd_lcdupdate_func(void)
 			if (lcd_draw_update == 0)
 			lcd_draw_update = 1;
 			lcd_encoder += lcd_encoder_diff / ENCODER_PULSES_PER_STEP;
+			Sound_MakeSound(e_SOUND_TYPE_EncoderMove);
 			lcd_encoder_diff = 0;
 			lcd_timeoutToStatus.start();
 		}

Firmware/util.cpp

@@ -295,15 +295,9 @@ bool show_upgrade_dialog_if_version_newer(const char *version_string)
         for (const char *c = version_string; ! is_whitespace_or_nl_or_eol(*c); ++ c)
             lcd_putc(*c);
         lcd_puts_at_P(0, 3, _i("Please upgrade."));////MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
-if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
-        _tone(BEEPER, 1000);
-        delay_keep_alive(50);
-        _noTone(BEEPER);
+        Sound_MakeCustom(50,1000,false);
         delay_keep_alive(500);
-if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
-        _tone(BEEPER, 1000);
-        delay_keep_alive(50);
-        _noTone(BEEPER);
+        Sound_MakeCustom(50,1000,false);
         lcd_wait_for_click();
         lcd_update_enable(true);
         lcd_clear();