 PavelSindler
|
32df4f68a1
messages translated, invalidate calibration status at the beginning of temp. calibration
|
8 yıl önce |
|
PavelSindler
|
397039270a
PINDA Preheating countdown updated
|
8 yıl önce |
|
PavelSindler
|
50b7f627cd
pinda preheating messages changed
|
8 yıl önce |
|
PavelSindler
|
7e8780ba61
long press compatible with timeout to status, temp compensation extrapolation, preheat Z coordinate added, G75 for showing interpolation table
|
8 yıl önce |
|
PavelSindler
|
7ec45271c2
timeout to status, better print time counting when using pause print
|
8 yıl önce |
|
PavelSindler
|
c03a18f8c3
czech messages added, temperature calibration is off in fresh eeprom, pinda preheat phase is not used unless calibration was run, pause print works with gcode absolute and relative extruder mode, move z higher after selftest
|
8 yıl önce |
|
PavelSindler
|
329e1ac9bb
waiting for PINDA to cool down
|
8 yıl önce |
|
PavelSindler
|
4de9b1c9f6
temp calibration on/off initialization when updating firmware
|
8 yıl önce |
|
PavelSindler
|
70b6e13de4
farm mode activation and farm number initialization handled when upgrading firmware versions and when flashing to new eeprom
|
8 yıl önce |
|
PavelSindler
|
e061209fc2
mesh bed leveling flag
|
8 yıl önce |
|
PavelSindler
|
ba36fbbfa3
endif removed
|
8 yıl önce |
|
PavelSindler
|
fc221fbea5
Merged PINDA temp calibration branch into MK2
|
8 yıl önce |
|
PavelSindler
|
7b962d666f
pause print statistics
|
8 yıl önce |
|
PavelSindler
|
2060d319f5
faster load filament, extrusion before unload filament
|
8 yıl önce |
|
PavelSindler
|
fab71ff7cf
information that temp calibration active is active is stored to eeprom
|
8 yıl önce |
|
PavelSindler
|
ccdf5e9c41
Message that temp calibration has not been run yet is displayed only if temp. calibration is activated
|
8 yıl önce |
|
PavelSindler
|
08a59f7fef
status messages for temp calibration added, initial versoin of temp calibration on/off from menu
|
8 yıl önce |
|
PavelSindler
|
abadaa5885
added retraction to preheat, no waiting when running mesh bed leveling from calibration menu
|
8 yıl önce |
|
PavelSindler
|
762167fb00
Merge remote-tracking branch 'ayourk/MK2' into MK2
|
8 yıl önce |
|
PavelSindler
|
6ffc022633
stop print statistics needs to finish, lcd_licked function improved to work with long press button, selftest bug fixed; stop print, pause print and live adjust are hidden in mesh bed leveling and auto home
|
8 yıl önce |
|
PavelSindler
|
64f4181451
initial version of long pause
|
8 yıl önce |
|
PavelSindler
|
7daf6b2efd
dont use blocking encoder for button press, lcd_update(false) added to setup function
|
8 yıl önce |
|
PavelSindler
|
ed5842d1d1
Rx buffer overflow behavior improved
|
8 yıl önce |
|
PavelSindler
|
fb8ba9c151
interrupt dont use, another iteration
|
8 yıl önce |
|
PavelSindler
|
31c7469b79
long press init
|
8 yıl önce |
|
PavelSindler
|
3017decb9a
fixed undesirable farm mode activation after flashing new firmware
|
8 yıl önce |
|
PavelSindler
|
0dee7b78ed
fixed message when serching first point in xyz cal.
|
8 yıl önce |
|
PavelSindler
|
7ad319a16a
farm mode: printer sends farm number and status, no ping acoustic allert
|
8 yıl önce |
|
PavelSindler
|
608717d110
farm mode: detection if printer is connected to monitoring, PRN1 sends also farm number
|
8 yıl önce |
|
PavelSindler
|
f6edfb7c19
farm mode ping
|
8 yıl önce |
