 PavelSindler
|
96a111119b
document
|
%!s(int64=5) %!d(string=hai) anos |
|
PavelSindler
|
8f69d5a501
document
|
%!s(int64=5) %!d(string=hai) anos |
|
PavelSindler
|
e259967991
remove / comment debug code
|
%!s(int64=5) %!d(string=hai) anos |
|
PavelSindler
|
5863297538
if deviation between current Z-probe and avg, value > 50um, enlarge Z-probe movements and repeat measurement
|
%!s(int64=5) %!d(string=hai) anos |
|
PavelSindler
|
a9ce38df71
Function for decision if we have valid Z-calibration data in eeprom fixed, mesh bed leveling: possible crash fix, temporaty debug info on serial line.
|
%!s(int64=5) %!d(string=hai) anos |
|
PavelSindler
|
ef198856a4
increase relative movement in Z to work better with higher hysteresis PINDAs
|
%!s(int64=5) %!d(string=hai) anos |
|
PavelSindler
|
9e0e4198c5
Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update
|
%!s(int64=5) %!d(string=hai) anos |
|
PavelSindler
|
6c70d59810
mbl settings initialization fix
|
%!s(int64=5) %!d(string=hai) anos |
|
PavelSindler
|
0aa21c362e
compile error fix
|
%!s(int64=5) %!d(string=hai) anos |
|
PavelSindler
|
9a83925a97
fixed bug in counting approximate Z coordinate
|
%!s(int64=5) %!d(string=hai) anos |
|
PavelSindler
|
141b78c048
number of Z-probes defualt value changed from 4 to 3, mmu stealth mode switch in settings menu
|
%!s(int64=5) %!d(string=hai) anos |
|
PavelSindler
|
f293d61d3d
faster Z probe: move Z 150um relatively to last measurement. If PINDA is triggered at the beginning of measurement, move Z 500um higher and repeat measurement
|
%!s(int64=5) %!d(string=hai) anos |
|
PavelSindler
|
6a864ffbab
G80 parameters configurable via settings menu
|
%!s(int64=5) %!d(string=hai) anos |
|
PavelSindler
|
7c187541e1
function for valid points determination improved; simple Z-coordinate estimation; measure all points and use inaccurate Z-coordinate in case that we don't have enought information for counting Z-coordinate estimation
|
%!s(int64=5) %!d(string=hai) anos |
|
PavelSindler
|
d9e93e8a77
measurements points moved 10mm to the left; measure only chosen points (e.g. not points affected by magnets proximity)
|
%!s(int64=5) %!d(string=hai) anos |
|
PavelSindler
|
17f095b957
shorter Z movements (makes calibration faster)
|
%!s(int64=5) %!d(string=hai) anos |
|
PavelSindler
|
e27fdafcec
menu switch - initial
|
%!s(int64=5) %!d(string=hai) anos |
|
Laurentiu
|
51827c578f
MESH_MEAS_NUM_X_POINTS constant correction to MESH_MEAS_NUM_Y_POINTS
|
%!s(int64=5) %!d(string=hai) anos |
|
Laurentiu
|
62875f2e95
MESH_MEAS_NUM_X_POINTS constant correction to MESH_MEAS_NUM_Y_POINTS
|
%!s(int64=5) %!d(string=hai) anos |
|
Laurentiu
|
4835b9b220
7x7 points mesh bed leveling
|
%!s(int64=5) %!d(string=hai) anos |
|
Robert Pelnar
|
9a68501039
MK2 variants compilable
|
%!s(int64=6) %!d(string=hai) anos |
|
Marek Bel
|
1585dc66b0
Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500
|
%!s(int64=6) %!d(string=hai) anos |
|
Marek Bel
|
3f28632443
Use cs.axis_steps_per_unit from ConfigurationStore.
|
%!s(int64=6) %!d(string=hai) anos |
|
Robert Pelnar
|
8409a26594
Live adjust Z - display zero in case of invalid calibration status (same logic in babystep_load and _lcd_babystep)
|
%!s(int64=6) %!d(string=hai) anos |
|
Robert Pelnar
|
e22d204e8e
LCD menu optimalization - print functions
|
%!s(int64=6) %!d(string=hai) anos |
|
Robert Pelnar
|
68e59399af
LCD menu optimalization - lcd_printPGM replaced with lcd_puts_P
|
%!s(int64=6) %!d(string=hai) anos |
|
Robert Pelnar
|
b6223d5623
LCD menu optimalization
|
%!s(int64=6) %!d(string=hai) anos |
|
mkbel
|
02bd319a6c
Merge pull request #818 from 3d-gussner/MK3_fix7
|
%!s(int64=6) %!d(string=hai) anos |
|
3d-gussner
|
c29042dead
Fix warning:
|
%!s(int64=6) %!d(string=hai) anos |
|
Robert Pelnar
|
47c68c884c
New ML support - fixed duplicate strings
|
%!s(int64=6) %!d(string=hai) anos |
