| .. |
|
variants
|
8562235440
MK2.5 port - compilable version
|
6 jaren geleden |
|
BlinkM.cpp
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
BlinkM.h
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
Configuration.h
|
b202f2b297
version changed
|
6 jaren geleden |
|
ConfigurationStore.cpp
|
3bd892135a
erase eeprom section which belongs to M500 gcode in case that version was changed and default settings are used
|
6 jaren geleden |
|
ConfigurationStore.h
|
88f248cb77
Inform user that hardcoded default settings were loaded (EEPROM version change)
|
7 jaren geleden |
|
Configuration_adv.h
|
8a5ba89a9c
Missing serial characters debuging
|
7 jaren geleden |
|
Configuration_prusa.h
|
80f353e8ff
Z_MAX_POS
|
6 jaren geleden |
|
DOGMbitmaps.h
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
Dcodes.cpp
|
210b97d16d
New fail stats (global, last print), crashdetection X and Y separated
|
7 jaren geleden |
|
Dcodes.h
|
25dd6dd673
new module adc (analog2digital)
|
7 jaren geleden |
|
Firmware.ino
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
Firmware.ino.rambo.hex
|
0a2087c1cb
build 143e
|
7 jaren geleden |
|
Firmware.sublime-project
|
307d17422d
3.0.6 sync
|
8 jaren geleden |
|
LiquidCrystal.cpp
|
b8525f8043
Print class printf function (experimental, disabled by default)
|
7 jaren geleden |
|
LiquidCrystal.h
|
b8525f8043
Print class printf function (experimental, disabled by default)
|
7 jaren geleden |
|
Marlin.h
|
29978c4126
TACH_1 must be defined to enable print fan error
|
6 jaren geleden |
|
MarlinSerial.cpp
|
a94e266cf1
Documented CPU load and frequency of the following interrupts:
|
7 jaren geleden |
|
MarlinSerial.h
|
8a5ba89a9c
Missing serial characters debuging
|
7 jaren geleden |
|
Marlin_main.cpp
|
a719ae1b01
whitespace
|
6 jaren geleden |
|
Sd2Card.cpp
|
43d696659f
3.0.12-RC2 sync
|
7 jaren geleden |
|
Sd2Card.h
|
43d696659f
3.0.12-RC2 sync
|
7 jaren geleden |
|
Sd2PinMap.h
|
43d696659f
3.0.12-RC2 sync
|
7 jaren geleden |
|
SdBaseFile.cpp
|
c83b1833bc
Johhny Firmware sync
|
7 jaren geleden |
|
SdBaseFile.h
|
43d696659f
3.0.12-RC2 sync
|
7 jaren geleden |
|
SdFatConfig.h
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
SdFatStructs.h
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
SdFatUtil.cpp
|
3faef75a0d
3.0.10 sync
|
7 jaren geleden |
|
SdFatUtil.h
|
43d696659f
3.0.12-RC2 sync
|
7 jaren geleden |
|
SdFile.cpp
|
43d696659f
3.0.12-RC2 sync
|
7 jaren geleden |
|
SdFile.h
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
SdInfo.h
|
43d696659f
3.0.12-RC2 sync
|
7 jaren geleden |
|
SdVolume.cpp
|
43d696659f
3.0.12-RC2 sync
|
7 jaren geleden |
|
SdVolume.h
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
Servo.cpp
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
Servo.h
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
adc.c
|
546314fda7
Removed debug messages from serial comunication (octoprint...).
|
7 jaren geleden |
|
adc.h
|
25dd6dd673
new module adc (analog2digital)
|
7 jaren geleden |
|
boards.h
|
f40b8a2186
MK3 configuration files, renamed EINY to EINSY
|
6 jaren geleden |
|
cardreader.cpp
|
1a01282e33
cardreader - new member "paused"
|
7 jaren geleden |
|
cardreader.h
|
1a01282e33
cardreader - new member "paused"
|
7 jaren geleden |
|
cmdqueue.cpp
|
17a8e2db01
Documented the interrupt blocking by a main thread by its maximum time.
|
7 jaren geleden |
|
cmdqueue.h
|
9e534c1990
Minimize risk of stepper routine interrupt blocking by reorganizing
|
7 jaren geleden |
|
config.h
|
25dd6dd673
new module adc (analog2digital)
|
7 jaren geleden |
|
digipot_mcp4451.cpp
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
dogm_font_data_marlin.h
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
dogm_lcd_implementation.h
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
fastio.h
|
db985065ff
WRITE_NC macro for non-critical (non-synchronized) access to
|
7 jaren geleden |
|
fsensor.cpp
|
e20ee149b0
filament sensor additional check after runout (3mm back, 3mm forward @200mm/min)
|
7 jaren geleden |
|
fsensor.h
|
a9d5af4a07
Wizard: dont ask if color is clear and dont use automatic filament load; multiscreen messages update
|
7 jaren geleden |
|
langtool.php
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
langtool.pl
|
22065e4877
merging from dev/MK3
|
7 jaren geleden |
|
language.h
|
307d17422d
3.0.6 sync
|
8 jaren geleden |
|
language_all.cpp
|
3bd892135a
erase eeprom section which belongs to M500 gcode in case that version was changed and default settings are used
|
6 jaren geleden |
|
language_all.h
|
9d8191323b
Merge pull request #440 from XPila/3.1.1-RC6
|
7 jaren geleden |
|
language_common.h
|
307d17422d
3.0.6 sync
|
8 jaren geleden |
|
language_cz.h
|
3bd892135a
erase eeprom section which belongs to M500 gcode in case that version was changed and default settings are used
|
6 jaren geleden |
|
language_de.h
|
bbffd2f31b
basic language corrections
|
7 jaren geleden |
|
language_en.h
|
3bd892135a
erase eeprom section which belongs to M500 gcode in case that version was changed and default settings are used
|
6 jaren geleden |
|
language_es.h
|
bbffd2f31b
basic language corrections
|
7 jaren geleden |
|
language_it.h
|
bbffd2f31b
basic language corrections
|
7 jaren geleden |
|
language_pl.h
|
bbffd2f31b
basic language corrections
|
7 jaren geleden |
|
le.sh
|
43d696659f
3.0.12-RC2 sync
|
7 jaren geleden |
|
mesh_bed_calibration.cpp
|
546314fda7
Removed debug messages from serial comunication (octoprint...).
|
7 jaren geleden |
|
mesh_bed_calibration.h
|
480838a0a1
Fixed homing (mbl and babystep - crashdetection recovery work fine now).
|
7 jaren geleden |
|
mesh_bed_leveling.cpp
|
78ebd522b6
Removed support for DELTA, SCARA and BARICUDA.
|
8 jaren geleden |
|
mesh_bed_leveling.h
|
6cff4b92ff
Automatic bed calibration by searching the 3x3 point matrix.
|
8 jaren geleden |
|
motion_control.cpp
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
motion_control.h
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
pat9125.cpp
|
44dc12005f
Optimization of the filament sensor.
|
7 jaren geleden |
|
pat9125.h
|
44dc12005f
Optimization of the filament sensor.
|
7 jaren geleden |
|
pins.h
|
f40b8a2186
MK3 configuration files, renamed EINY to EINSY
|
6 jaren geleden |
|
pins_Einsy_1_0.h
|
8562235440
MK2.5 port - compilable version
|
6 jaren geleden |
|
pins_Rambo_1_3.h
|
0c98ec5f6b
selftest, max endstops undefined, initialization of extruder fan, y offset from extruder
|
6 jaren geleden |
|
planner.cpp
|
815dfcb14b
Implemented a stepper timer reset after a long blocking cli()
|
7 jaren geleden |
|
planner.h
|
582a6270b0
Fix of a power panic print stop.
|
7 jaren geleden |
|
qr_solve.cpp
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
qr_solve.h
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
speed_lookuptable.h
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
stepper.cpp
|
0c98ec5f6b
selftest, max endstops undefined, initialization of extruder fan, y offset from extruder
|
6 jaren geleden |
|
stepper.h
|
815dfcb14b
Implemented a stepper timer reset after a long blocking cli()
|
7 jaren geleden |
|
swi2c.cpp
|
683784c4c7
PAT9125 I2C, hardware SG homing
|
7 jaren geleden |
|
swi2c.h
|
683784c4c7
PAT9125 I2C, hardware SG homing
|
7 jaren geleden |
|
swspi.cpp
|
683784c4c7
PAT9125 I2C, hardware SG homing
|
7 jaren geleden |
|
swspi.h
|
683784c4c7
PAT9125 I2C, hardware SG homing
|
7 jaren geleden |
|
temperature.cpp
|
29978c4126
TACH_1 must be defined to enable print fan error
|
6 jaren geleden |
|
temperature.h
|
0c98ec5f6b
selftest, max endstops undefined, initialization of extruder fan, y offset from extruder
|
6 jaren geleden |
|
thermistortables.h
|
7e00248060
new ambient thermistor table
|
7 jaren geleden |
|
tmc2130.cpp
|
1a01282e33
cardreader - new member "paused"
|
7 jaren geleden |
|
tmc2130.h
|
210b97d16d
New fail stats (global, last print), crashdetection X and Y separated
|
7 jaren geleden |
|
ultralcd.cpp
|
0c98ec5f6b
selftest, max endstops undefined, initialization of extruder fan, y offset from extruder
|
6 jaren geleden |
|
ultralcd.h
|
0c98ec5f6b
selftest, max endstops undefined, initialization of extruder fan, y offset from extruder
|
6 jaren geleden |
|
ultralcd_implementation_hitachi_HD44780.h
|
330f1576fc
Support for debug builds:
|
7 jaren geleden |
|
ultralcd_st7920_u8glib_rrd.h
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
uni_avr_rpi.h
|
683784c4c7
PAT9125 I2C, hardware SG homing
|
7 jaren geleden |
|
util.cpp
|
84f7d057f3
fw version check: FW_VERSION string is case insensitive (parsing RC works)
|
6 jaren geleden |
|
util.h
|
43d696659f
3.0.12-RC2 sync
|
7 jaren geleden |
|
vector_3.cpp
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
vector_3.h
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
watchdog.cpp
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
|
watchdog.h
|
a4a80b3eb7
MK2 Firmware release.
|
8 jaren geleden |
PavelSindler
80f353e8ff
Z_MAX_POS