| .. |
|
variants
|
60acdd23c5
variants
|
%!s(int64=5) %!d(string=hai) anos |
|
AutoDeplete.cpp
|
a7128ffa04
Comment.
|
%!s(int64=5) %!d(string=hai) anos |
|
AutoDeplete.h
|
a309ec1b0b
Add filament auto deplete engine for multi-material prints with MMUv2.
|
%!s(int64=5) %!d(string=hai) anos |
|
BlinkM.cpp
|
a4a80b3eb7
MK2 Firmware release.
|
%!s(int64=8) %!d(string=hai) anos |
|
BlinkM.h
|
a4a80b3eb7
MK2 Firmware release.
|
%!s(int64=8) %!d(string=hai) anos |
|
Configuration.h
|
8f039263d5
variant files and version
|
%!s(int64=5) %!d(string=hai) anos |
|
ConfigurationStore.cpp
|
ab5b57df11
Style.
|
%!s(int64=6) %!d(string=hai) anos |
|
ConfigurationStore.h
|
9cae0c378a
Rename _EEPROM_writeData to EEPROM_writeData. Rename _EEPROM_readData to EEPROM_readData. Add return value to EEPROM_writeData to detect failure to write. Do not mark data as valid, if write has failed. Remove EEPROM_WRITE_VAR and EEPROM_READ_VAR macros. Make pos input only parameter. Convert EEPROM_OFFSET macro to typed constatant EEPROM_M500_base, it was defined in two places, leave it in one place. Use Config_StoreSettings() instead of erase_eeprom_section(). Compare float with 0xff byte by byte to avoid compiler warning "Dereferencing type punned pointer will break strict aliasing rules."
|
%!s(int64=6) %!d(string=hai) anos |
|
Configuration_adv.h
|
268d2634f0
LCD menu optimalization - lcd and menu
|
%!s(int64=6) %!d(string=hai) anos |
|
Dcodes.cpp
|
01529f18d2
upstream/MK3 merge
|
%!s(int64=6) %!d(string=hai) anos |
|
Dcodes.h
|
ac1a56b493
Merge branch 'MK25' into MK3
|
%!s(int64=6) %!d(string=hai) anos |
|
Firmware.ino
|
19a72ef9eb
LCD menu optimalization - LiquidCrystal_Prusa removed
|
%!s(int64=6) %!d(string=hai) anos |
|
Marlin.h
|
e0c1e4a02d
version which should on all printer versions: autoload, selftest, filament detection, filament sensors initialization, filament menus
|
%!s(int64=5) %!d(string=hai) anos |
|
MarlinSerial.cpp
|
e69fd05fce
Optimized LiquidCrystal class
|
%!s(int64=6) %!d(string=hai) anos |
|
MarlinSerial.h
|
ebd8375313
New ML support - external flash W25X20CL - upgrade is working!!! (hardcoded to german)
|
%!s(int64=6) %!d(string=hai) anos |
|
Marlin_main.cpp
|
dd4d8e1277
calibrate z endstop update
|
%!s(int64=5) %!d(string=hai) anos |
|
Sd2Card.cpp
|
43d696659f
3.0.12-RC2 sync
|
%!s(int64=7) %!d(string=hai) anos |
|
Sd2Card.h
|
43d696659f
3.0.12-RC2 sync
|
%!s(int64=7) %!d(string=hai) anos |
|
Sd2PinMap.h
|
43d696659f
3.0.12-RC2 sync
|
%!s(int64=7) %!d(string=hai) anos |
|
SdBaseFile.cpp
|
c83b1833bc
Johhny Firmware sync
|
%!s(int64=7) %!d(string=hai) anos |
|
SdBaseFile.h
|
43d696659f
3.0.12-RC2 sync
|
%!s(int64=7) %!d(string=hai) anos |
|
SdFatConfig.h
|
a4a80b3eb7
MK2 Firmware release.
|
%!s(int64=8) %!d(string=hai) anos |
|
SdFatStructs.h
|
a4a80b3eb7
MK2 Firmware release.
|
%!s(int64=8) %!d(string=hai) anos |
|
SdFatUtil.cpp
|
5f8e87e649
Fix compiler warning: sketch/SdFatUtil.cpp:49:7: warning: unused variable 'i' [-Wunused-variable]
|
%!s(int64=6) %!d(string=hai) anos |
|
SdFatUtil.h
|
43d696659f
3.0.12-RC2 sync
|
%!s(int64=7) %!d(string=hai) anos |
|
SdFile.cpp
|
43d696659f
3.0.12-RC2 sync
|
%!s(int64=7) %!d(string=hai) anos |
|
SdFile.h
|
e69fd05fce
Optimized LiquidCrystal class
|
%!s(int64=6) %!d(string=hai) anos |
|
SdInfo.h
|
43d696659f
3.0.12-RC2 sync
|
%!s(int64=7) %!d(string=hai) anos |
|
SdVolume.cpp
|
43d696659f
3.0.12-RC2 sync
|
%!s(int64=7) %!d(string=hai) anos |
|
SdVolume.h
|
a4a80b3eb7
MK2 Firmware release.
|
%!s(int64=8) %!d(string=hai) anos |
|
Servo.cpp
|
a4a80b3eb7
MK2 Firmware release.
|
%!s(int64=8) %!d(string=hai) anos |
|
Servo.h
|
a4a80b3eb7
MK2 Firmware release.
|
%!s(int64=8) %!d(string=hai) anos |
|
Timer.cpp
|
923a06c164
menu data shared memory re-design
|
%!s(int64=6) %!d(string=hai) anos |
|
Timer.h
|
490f0c9620
Store timer period in TimerRemaining.
|
%!s(int64=6) %!d(string=hai) anos |
|
TimerRemaining.h
|
d669b4e93a
Fix off by one error in TimerRemaining::remaining(). Add test cases for Timer.
|
%!s(int64=6) %!d(string=hai) anos |
|
adc.c
|
1e05e1189d
Fix PFW644 - MK25 reports stopped, arduino 1.8.5.
|
%!s(int64=6) %!d(string=hai) anos |
|
adc.h
|
fd332c1ff1
Fix ADC index overflow
|
%!s(int64=6) %!d(string=hai) anos |
|
boards.h
|
f40b8a2186
MK3 configuration files, renamed EINY to EINSY
|
%!s(int64=6) %!d(string=hai) anos |
|
bootapp.c
|
ac18eb67c0
New lang, arduino 1.8.5 - boot_app debug output
|
%!s(int64=6) %!d(string=hai) anos |
|
bootapp.h
|
ac18eb67c0
New lang, arduino 1.8.5 - boot_app debug output
|
%!s(int64=6) %!d(string=hai) anos |
|
cardreader.cpp
|
e229f3343e
Lang - text "volume.init failed" removed from dictionary
|
%!s(int64=6) %!d(string=hai) anos |
|
cardreader.h
|
2e719c7885
Fix stack corruption for folder name longer than 12 characters. Save 260B of flash memory. Move duplicate code to separate method. Fix compiler warnings: sketch/cardreader.cpp:448:25: warning: ordered comparison of pointer with integer zero [-Wextra]
|
%!s(int64=6) %!d(string=hai) anos |
|
cmdqueue.cpp
|
c1773c1aa4
Merge pull request #1356 from PavelSindler/MK3_for_merging
|
%!s(int64=6) %!d(string=hai) anos |
|
cmdqueue.h
|
716e6c209c
Save 88B FLASH and fix compiler warnings:
|
%!s(int64=6) %!d(string=hai) anos |
|
config.h
|
38dacaf07a
Automate secondary language support build.
|
%!s(int64=6) %!d(string=hai) anos |
|
conv2str.cpp
|
fd3fc31304
LCD menu optimalization - conversion functions - source separation
|
%!s(int64=6) %!d(string=hai) anos |
|
conv2str.h
|
fd3fc31304
LCD menu optimalization - conversion functions - source separation
|
%!s(int64=6) %!d(string=hai) anos |
|
doxyfile
|
fe30e58fb5
Add possibility to unload filament from wizard before first layer calibration, if it is not PLA.
|
%!s(int64=6) %!d(string=hai) anos |
|
eeprom.h
|
29ecd4ec7a
duplicit T-codes execution improved, E-stepper movements when waiting for ok from mmu, continue loading function improved, eeprom: fail stats for mmu
|
%!s(int64=6) %!d(string=hai) anos |
|
fastio.h
|
db985065ff
WRITE_NC macro for non-critical (non-synchronized) access to
|
%!s(int64=6) %!d(string=hai) anos |
|
fsensor.cpp
|
83510ed489
check_for_ir_sensor
|
%!s(int64=5) %!d(string=hai) anos |
|
fsensor.h
|
6b1cf99066
conditional compilation updated
|
%!s(int64=5) %!d(string=hai) anos |
|
io_atmega2560.h
|
70bb851c62
New ML support - added missing file
|
%!s(int64=6) %!d(string=hai) anos |
|
language.c
|
563052d015
New lang, arduino 1.8.5 - language.c - DEBUG_SEC_LANG fix
|
%!s(int64=6) %!d(string=hai) anos |
|
language.h
|
d301aa0e8c
New lang - fixed french langcode and comparsion in lang-clean script
|
%!s(int64=6) %!d(string=hai) anos |
|
lcd.cpp
|
b4d4bfa667
Do not declare extern class in .cpp file, include appropriate header.
|
%!s(int64=6) %!d(string=hai) anos |
|
lcd.h
|
95b0506284
Make lcd_long_press_active private.
|
%!s(int64=6) %!d(string=hai) anos |
|
le.sh
|
43d696659f
3.0.12-RC2 sync
|
%!s(int64=7) %!d(string=hai) anos |
|
menu.cpp
|
940f436a5f
merge MK3_dev into MK3
|
%!s(int64=6) %!d(string=hai) anos |
|
menu.h
|
46a3baac57
Add menu_item_edit_P<uint8_t*> specialization to be used for linearity correction. Works well, but costs about 600..700B of FLASH, needs to be optimized.
|
%!s(int64=6) %!d(string=hai) anos |
|
mesh_bed_calibration.cpp
|
9a68501039
MK2 variants compilable
|
%!s(int64=6) %!d(string=hai) anos |
|
mesh_bed_calibration.h
|
8409a26594
Live adjust Z - display zero in case of invalid calibration status (same logic in babystep_load and _lcd_babystep)
|
%!s(int64=6) %!d(string=hai) anos |
|
mesh_bed_leveling.cpp
|
4c146a5b2c
Fix compiler warning: sketch/mesh_bed_leveling.cpp:24:6: warning: unused parameter 'use_default' [-Wunused-parameter].
|
%!s(int64=6) %!d(string=hai) anos |
|
mesh_bed_leveling.h
|
6cff4b92ff
Automatic bed calibration by searching the 3x3 point matrix.
|
%!s(int64=8) %!d(string=hai) anos |
|
messages.c
|
42f2a61416
Lang - text "TRIGGERED" removed from dictionary
|
%!s(int64=6) %!d(string=hai) anos |
|
messages.h
|
42f2a61416
Lang - text "TRIGGERED" removed from dictionary
|
%!s(int64=6) %!d(string=hai) anos |
|
mmu.cpp
|
83510ed489
check_for_ir_sensor
|
%!s(int64=5) %!d(string=hai) anos |
|
mmu.h
|
7e3a1c7d45
merge changes from upstream
|
%!s(int64=5) %!d(string=hai) anos |
|
motion_control.cpp
|
a4a80b3eb7
MK2 Firmware release.
|
%!s(int64=8) %!d(string=hai) anos |
|
motion_control.h
|
a4a80b3eb7
MK2 Firmware release.
|
%!s(int64=8) %!d(string=hai) anos |
|
optiboot_w25x20cl.cpp
|
6c13225f49
Fix PFW651 - cannot upload MK3 languages with slic3r (firmware compiled on linux arduino 1.8.5 + lto)
|
%!s(int64=6) %!d(string=hai) anos |
|
optiboot_w25x20cl.h
|
eef6c68c9f
Added support for a secondary boot loader, based on the OptiBoot project,
|
%!s(int64=6) %!d(string=hai) anos |
|
pat9125.c
|
e77a54034c
Fix compiler warning arduino-1.6.9/hardware/tools/avr/avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>." [-Wcpp]
|
%!s(int64=6) %!d(string=hai) anos |
|
pat9125.h
|
b35a212d15
PAT9125 optimalization (rewrited to C, 8bit sampling)
|
%!s(int64=6) %!d(string=hai) anos |
|
pins.h
|
0b6644915a
Add files via upload
|
%!s(int64=6) %!d(string=hai) anos |
|
pins_Einsy_1_0.h
|
e0c1e4a02d
version which should on all printer versions: autoload, selftest, filament detection, filament sensors initialization, filament menus
|
%!s(int64=5) %!d(string=hai) anos |
|
pins_Rambo_1_0.h
|
e0c1e4a02d
version which should on all printer versions: autoload, selftest, filament detection, filament sensors initialization, filament menus
|
%!s(int64=5) %!d(string=hai) anos |
|
pins_Rambo_1_3.h
|
e0c1e4a02d
version which should on all printer versions: autoload, selftest, filament detection, filament sensors initialization, filament menus
|
%!s(int64=5) %!d(string=hai) anos |
|
planner.cpp
|
283e33dd69
Lang - text " cold extrusion prevented" removed from dictionary
|
%!s(int64=6) %!d(string=hai) anos |
|
planner.h
|
c38fef281d
Use cs.max_feedrate_silent, cs.max_acceleration_units_per_sq_second_silent from ConfigurationStore.
|
%!s(int64=6) %!d(string=hai) anos |
|
printers.h
|
60acdd23c5
variants
|
%!s(int64=5) %!d(string=hai) anos |
|
qr_solve.cpp
|
a4a80b3eb7
MK2 Firmware release.
|
%!s(int64=8) %!d(string=hai) anos |
|
qr_solve.h
|
a4a80b3eb7
MK2 Firmware release.
|
%!s(int64=8) %!d(string=hai) anos |
|
rbuf.c
|
5979bf5e0c
T-codes for MMU_V2: initial version
|
%!s(int64=6) %!d(string=hai) anos |
|
rbuf.h
|
5979bf5e0c
T-codes for MMU_V2: initial version
|
%!s(int64=6) %!d(string=hai) anos |
|
sm4.c
|
bd907aec86
Fix 4 compiler warnings of type sketch/sm4.c:88:2: warning: 'register' is not at beginning of declaration [-Wold-style-declaration].
|
%!s(int64=6) %!d(string=hai) anos |
|
sm4.h
|
65a91b366d
New XYZ calibration with image processing
|
%!s(int64=6) %!d(string=hai) anos |
|
sound.cpp
|
73794b56cf
MeshBed Leveling Fail
|
%!s(int64=6) %!d(string=hai) anos |
|
sound.h
|
453b199057
Save 8B flash, fix compiler warning sketch/sound.cpp:62:6: warning: unused parameter 'eSoundClass' [-Wunused-parameter]
|
%!s(int64=6) %!d(string=hai) anos |
|
speed_lookuptable.h
|
a4a80b3eb7
MK2 Firmware release.
|
%!s(int64=8) %!d(string=hai) anos |
|
spi.c
|
186e630299
New SPI (do not use Arduino SPI class)
|
%!s(int64=6) %!d(string=hai) anos |
|
spi.h
|
bd1e410228
New ML support - W25X20CL external spi flash support
|
%!s(int64=6) %!d(string=hai) anos |
|
static_assert.h
|
e50025cc7d
static_assert - portable solution compatible with C++98
|
%!s(int64=6) %!d(string=hai) anos |
|
stepper.cpp
|
9f86a334c6
Lang - text "endstops hit: " removed from dictionary
|
%!s(int64=6) %!d(string=hai) anos |
|
stepper.h
|
290328445a
Merge pull request #1019 from mkbel/MK3_fix6
|
%!s(int64=6) %!d(string=hai) anos |
|
stk500.h
|
eef6c68c9f
Added support for a secondary boot loader, based on the OptiBoot project,
|
%!s(int64=6) %!d(string=hai) anos |
|
swi2c.c
|
7cfa3156c7
Fix compiler warning arduino-1.6.9/hardware/tools/avr/avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>." [-Wcpp]
|
%!s(int64=6) %!d(string=hai) anos |
|
swi2c.h
|
410e911364
SWI2C for PAT9125 simplified/optimized
|
%!s(int64=6) %!d(string=hai) anos |
|
swspi.cpp
|
683784c4c7
PAT9125 I2C, hardware SG homing
|
%!s(int64=7) %!d(string=hai) anos |
|
swspi.h
|
683784c4c7
PAT9125 I2C, hardware SG homing
|
%!s(int64=7) %!d(string=hai) anos |
|
temperature.cpp
|
1742dbdb9e
Merge remote-tracking branch 'my_dev/MK3' into dev
|
%!s(int64=5) %!d(string=hai) anos |
|
temperature.h
|
2ea34d21e7
Revert "Revert "Mk3 bed fast pwm""
|
%!s(int64=5) %!d(string=hai) anos |
|
thermistortables.h
|
fcfb4cdcae
New ML support - menu tunning, startup
|
%!s(int64=6) %!d(string=hai) anos |
|
timer02.c
|
2ea34d21e7
Revert "Revert "Mk3 bed fast pwm""
|
%!s(int64=5) %!d(string=hai) anos |
|
tmc2130.cpp
|
41b885c537
M907 fix - value in mA (PFW)
|
%!s(int64=6) %!d(string=hai) anos |
|
tmc2130.h
|
41b885c537
M907 fix - value in mA (PFW)
|
%!s(int64=6) %!d(string=hai) anos |
|
uart2.c
|
ac62117d6b
Merge remote-tracking branch 'prusa3d/MK3' into MK3_dev
|
%!s(int64=6) %!d(string=hai) anos |
|
uart2.h
|
71f1a1f6db
MMU - communication, check after start, code cleaning
|
%!s(int64=6) %!d(string=hai) anos |
|
ultralcd.cpp
|
29e156b26d
printer types updated
|
%!s(int64=5) %!d(string=hai) anos |
|
ultralcd.h
|
e95c2ad592
Display auto deplete as not available if filament sensor is disabled.
|
%!s(int64=6) %!d(string=hai) anos |
|
uni_avr_rpi.h
|
88cce94cf9
Revert "Revert "Save 80B of flash and 8B of RAM and fix compiler warning:""
|
%!s(int64=6) %!d(string=hai) anos |
|
util.cpp
|
970ba6fa2a
Sound
|
%!s(int64=6) %!d(string=hai) anos |
|
util.h
|
85bc19b77c
force selftest if user upgraded from 3.1.2-RC1 or older fw version
|
%!s(int64=6) %!d(string=hai) anos |
|
vector_3.cpp
|
a4a80b3eb7
MK2 Firmware release.
|
%!s(int64=8) %!d(string=hai) anos |
|
vector_3.h
|
a4a80b3eb7
MK2 Firmware release.
|
%!s(int64=8) %!d(string=hai) anos |
|
w25x20cl.c
|
eef6c68c9f
Added support for a secondary boot loader, based on the OptiBoot project,
|
%!s(int64=6) %!d(string=hai) anos |
|
w25x20cl.h
|
eef6c68c9f
Added support for a secondary boot loader, based on the OptiBoot project,
|
%!s(int64=6) %!d(string=hai) anos |
|
xyzcal.cpp
|
ac62117d6b
Merge remote-tracking branch 'prusa3d/MK3' into MK3_dev
|
%!s(int64=6) %!d(string=hai) anos |
|
xyzcal.h
|
cf43b85de9
XYZ calibration - accuracy improvement
|
%!s(int64=6) %!d(string=hai) anos |
PavelSindler
60acdd23c5
variants